- dovecot - dovecot.org

[Dovecot] Customflags problem?
by Rick Johnson 25 Jan '04

25 Jan '04

I'm new here, but I'll just jump right in. I've been using Dovecot with Fedora for a bit with the default mbox format. I recently transitioned to the Maildir format since some users were getting mailboxes in excess of 1GB in size, which made expunging and flagging no easy task. Anyway, it appears now with Maildir, that customflags are "added" instead of "replaced". I.E. in Thunderbird or Mozilla, if I set a message label of 5 (Later), and then change it to 3 (Personal), all's fine. However, if I switch it back to Later, or attempt to remove it, the flags are not removed. When I examine the flags on the filename, I see something like :2,FSag. If I attempt to change to additional labels and/or flag the message, I'll end up with aefg on the same message. Unfortunately only the first flag is accepted, and Moz/Tbird keeps label 5 as "a" was "read" delivered first. If I mark label as none, the flags remain, meaning I have to manually rename the file to remove the flags. This wasn't a problem using the mbox format, since the flags were stored in the file itself. Is this something broken in how the reader is requesting or is it a fault in the dæmon itself not removing old customflags before adding new? I suspect something inside src/lib-index/maildir/maildir-index.c Also of note, Evolution can seem to remove them, but only does so upon exit. I've reproduced it in 0.99.10-6 (fedora core 1) and 0.99.10.4-1 (fedora devel) versions. I filed a Bugzilla report at bugzilla.redhat.com under 114230 (https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=114230) -Rick -- Rick Johnson, RHCE #807302311706007 - rjohnson(a)medata.com Linux/Network Administrator - Medata, Inc. (from home) PGP Public Key: https://mail.medata.com/pgp/rjohnson.asc

1 0

[Dovecot] Internal error during expunge
by Tim Jakobsen 19 Jan '04

19 Jan '04

Hi, I'm using dovecot-0.99.10.4_1 on Freebsd. CPU architecture is i386. When ever I try to move messages og delete dem i get an internal error. Below I've tried to show what dovecot says. Mail gets stored using mbox format. After giving the internal error you kan try to expunge the mail again and it works without error. Any suggestions or ideas as to what could be wrong? is it a bug? A003 STORE 1 +FLAGS (\Deleted) * 1 FETCH (FLAGS (\Deleted \Seen)) A003 OK Store completed. A004 expunge imap(foo): Error: Error indexing mbox file /home/foo/Mail/INBOX.Drafts: LF not found where expected A004 NO Internal error [2004-01-14 14:08:13] Tia. -- Regards, Tim

2 1

[Dovecot] Certificate Authority-signed certs in dovecot?
by Benjamin J. Weiss 19 Jan '04

19 Jan '04

Hi! Sorry if this has been covered. I've just started using dovecot and I've searched via google and I've downloaded the maillist archives, but I haven't found a solution. I'm using Fedora Core 1, with dovecot-0.99.10-6. When I'm at work, I access my home mail server using Outlook Express (I know, I know, but it's the only client I'm allowed to use at work). Now, I'm able to get to my email, but I get a warning popup box each time I connect to the server, that the authenticity of the certificate can't be verified. I'm assuming that that's because I am using a self-signed certificate. Now, I'm also using postfix, and it allows for me creating my own CA certificate, and using it to sign my own certificates. The /etc/postfix/main.cf entries are: smtpd_tls_key_file = /etc/postfix/newreq.pem smtpd_tls_cert_file = /etc/postfix/newcert.pem smtpd_tls_CAfile = /etc/postfix/cacert.pem but while I see the following two lines in /etc/dovecot.conf: ssl_cert_file = /usr/share/ssl/certs/dovecot.pem ssl_key_file = /usr/share/ssl/private/dovecot.pem I don't see how to specify my CA cert. I'm pretty much a noob when it comes to openssl, but I've been able to follow directions to get the TLS working in both postfix and dovecot. I just want to get rid of that annoying message. I figure that there's a way to sign my dovecot certs with the ca cert I've already created for postfix, and tell dovecot about it somehow. Has anybody done this? Thanks! Ben

3 2

[Dovecot] Outlook 2002 sp-2 and initial connection after OS reboot
by David Crisp 14 Jan '04

14 Jan '04

I have a strange problem that I have been experienceing with dovecot: Dovecot version : 0.99.10.4-1 Using IMAP: When I restart the OS (windows XP) and open up Outlook 2002 SP2 I don't automatically get my IMAP folders on the DOVECOT imap server. (the one on the uw_imap server open up straight away) When I click on inbox I cam given a message saying : unable to connect to imap folders When highlight the inbox and go to "file" "connect to <imap server>" I get the error again.. "unable to connect to imap folders" If I just leave Outlook open for a while the folders mysteriously connect themselves. Has anybody seen this before and does anybody have any ideas on what to do to fix things. Is this an Outlook problem or a dovecot problem? I searched the archives and theres been nothing recently about this kind of problem. I need to get this system running in production very soon. --- David Crisp IT Systems Administrator WSL Consultants Pty Ltd dcrisp(a)wsl.com.au 2-8 Harvey Street Richmond Vic 3121 Australia Phone: +61 3 9429 4666 Fax: +61 3 9429 2294 Web: www.wsl.com.au ------------------------------------------------------------------------------ WSL Consultants Pty Ltd www.wsl.com.au Head Office: 2-8 Harvey Street, Richmond VIC 3121 Ph: (03) 9429 4666 Fax: (03) 9429 2294 Bendigo Office: Gate 6, Sharon Street La Trobe University, Bendigo PO Box 106, Strathdale VIC 3550 Ph: (03) 5444 7890 Fax: (03) 5444 7895 This message is intended solely for the individual(s) and entity(s) addressed. It is confidential and may contain legally privileged information. The use, copying or distribution of this message or any information it contains, by anyone other than the addressee, is prohibited. If you have received this message in error, please notify wsl(a)wsl.com.au. The mailbox address from which this message has been sent is for business mail only. Mail sent to it may be subject to security scanning and delivery of non-business messages sent to this address may not occur. Please note that the opinions expressed in this e-mail are those of the author, and are not necessarily those of WSL Consultants Pty Ltd. ------------------------------------------------------------------------------ ###################################################################### This e-mail message has been scanned and cleared by MailMarshal http://www.marshalsoftware.com ######################################################################

3 3

[Dovecot] dovecot and evolution
by Farkas Levente 13 Jan '04

13 Jan '04

hi, in evo when I open my mailbox INBOX is in the middle of my foder list. it seems evo sort folders alphanumericaly and eg Drafts is before INBOX. is there any way to put the inbox as the first folder? it very annoying:-( ps. anyway what is the status of the new indexing code and the thread view bug? thanks. -- Levente "Si vis pacem para bellum!"

3 3

[Dovecot] imap sync
by Arnold Cano 12 Jan '04

12 Jan '04

Has anyone used any of those utilities that synchronize imap email from one server to another? I tried using imapsync-1.65 and it reports that dovecot has no namespace support and requires me to manually enter the separator? Would this be "."? or ".INBOX"? or "/"? Thanks, Arnold

2 1

[Dovecot] some questions about log errors
by Charlie Allom 12 Jan '04

12 Jan '04

Hello, I migrated from the release target to the CVS target a few nights back, as I only use Maildir, and wanted look for improvements.. I am getting these errors in the maillog, and they keep coming up. I can delete the indexes, but wonder if it should be updateable by the mail-index process first? Jan 10 16:37:48 lazy pop3(ki): Updating broken sync_id in cache file /home/ki/Maildir/.INBOX/.imap.index.cache Jan 10 16:42:56 lazy pop3(ki): Updating broken sync_id in cache file /home/ki/Maildir/.INBOX/.imap.index.cache Jan 10 17:08:18 lazy pop3(ki): Updating broken sync_id in cache file /home/ki/Maildir/.INBOX/.imap.index.cache Jan 10 19:54:09 lazy pop3(ki): Updating broken sync_id in cache file /home/ki/Maildir/.INBOX/.imap.index.cache Jan 10 20:02:12 lazy pop3(ki): Updating broken sync_id in cache file /home/ki/Maildir/.INBOX/.imap.index.cache Jan 10 21:15:35 lazy pop3(ki): Updating broken sync_id in cache file /home/ki/Maildir/.INBOX/.imap.index.cache Jan 10 22:17:48 lazy imap(yeled): Corrupted index file /home/yeled/Maildir/.spam-caught/.imap.index: Duplicated message 1073729953.P4300Q320.lazy:2,S Jan 10 22:17:48 lazy imap(yeled): /home/yeled/Maildir/.spam-caught/dovecot-uidlist: Found duplicate filename 1073729953.P4300Q320.lazy, rebuilding Jan 10 23:50:19 lazy imap(yeled): Corrupted index cache file /home/yeled/Maildir/.mi.backups/.imap.index.cache: record points outside file Jan 10 23:50:19 lazy imap(yeled): Corrupted index cache file /home/yeled/Maildir/.mi.backups/.imap.index.cache: invalid record size Jan 10 23:50:19 lazy imap(yeled): Corrupted index file /home/yeled/Maildir/.mi.backups/.imap.index: Filename mismatch for UID 492: 1073739016.P11415Q5M850434.lazy vs 1073739017.P4404Q26M178284.lazy Jan 10 23:50:19 lazy imap(yeled): Couldn't lock created modify log file /home/yeled/Maildir/.mi.backups/.imap.index.log Jan 10 23:50:19 lazy imap(yeled): Warning: Inconsistency - Index /home/yeled/Maildir/.mi.backups/.imap.index was rebuilt while we had it open Jan 10 23:50:20 lazy imap(yeled): IndexID mismatch for modify log file /home/yeled/Maildir/.mi.backups/.imap.index.log As you can see the error says that it is `Updating broken sync_id' multiple times. The other errors - I'm not sure if they can be fixed.. C. -- charlie(a)rubberduck.com - Melbourne, Australia http://rubberduck.com/~yeled/ PGP: 0x14AA7941 || finger yeled(a)lazy.spodder.com

3 4

[Dovecot] no such file or directory
by Arnold Cano 09 Jan '04

09 Jan '04

I successfully installed dovecot 0.99.10 on a fedora box using postfix 2.0.11 and when I try to connect using my mozilla mail client I get the following error in the maillog... Jan 7 18:52:16 www1 imap(arnoldc): utime() failed with index file /home/arnoldc/Maildir/.INBOX/.imap.index: No such file or directory As you can see I'm using maildirs located in the home directories. Here is a copy of my dovecot.conf and I've removed all the commented out lines to save space... protocols = imap imap_listen = * ssl_disable = yes login_dir = /var/run/dovecot-login login = imap default_mail_env = maildir:~/Maildir client_workarounds = oe6-fetch-no-newmail outlook-idle mbox_locks = fcntl auth = default auth_mechanisms = plain auth_userdb = passwd auth_passdb = shadow auth_user = root auth_verbose = yes Also, I created the maildir manually and placed a copy in my /etc/skel so that all new users receive a copy. Here is the structure and permissions from the home directory... >ll drwx------ 5 arnoldc arnoldc 4096 Jan 7 18:33 Maildir >ll Maildir/ drwx------ 2 arnoldc arnoldc 4096 Jan 7 18:33 cur drwx------ 2 arnoldc arnoldc 4096 Jan 7 18:33 new drwx------ 2 arnoldc arnoldc 4096 Jan 7 18:33 tmp Any help would be appreciated! Arnold

2 3

[Dovecot] POP Before SMTP for Sendmail
by SIMflex Support 09 Jan '04

09 Jan '04

Does anyone have a patch or information resource on implementing POP before SMTP with sendmail and DoveCot? I implemented it using a qpopper patch before we swiched to DoveCot for Maildirs. We have been using DoveCot for almost a year now and love it better than any other IMAP or POP3 server. Thanks for the info, Doug Eubanks SIMflex Internet Support support(a)simflex.com SIMflex Telephone Support is available from 8am-8pm Mon thru Fri and 9am-12pm Sat 206-7934 Wilson Area 800-847-2979 All Other Areas

4 3

[Dovecot] Maildir and Mail at the same time.
by Dan Slowik 08 Jan '04

08 Jan '04

I am trying to use Maildir format for My inbox and be able to save the messages in ~/Mail. Problem is dovecot only show the Maildir mailboxes not the ~/Mail formatted boxes. How can I get this to work? If I use namespace or something how would this be configured I cannot find much documentation that explains it well enough. example: what would I have to configure in dovecot.conf or otherwise? I would like to see this. INBOX -- sent | drafts |- (Maildir format from ~/Maildir) trash -- sent -- recieved | deamons |- (mbox format from ~/Mail) unixfolk -- Currently I can only see the ~/Maildir like so. INBOX -- sent | drafts |- (Maildir format from ~/Maildir) trash -- Thanks __________________________________ Do you Yahoo!? Find out what made the Top Yahoo! Searches of 2003 http://search.yahoo.com/top2003

4 4