- dovecot - dovecot.org

help needed configuration of quota warning mails
by Götz Reinicke 13 Nov '16

13 Nov '16

Hi, we run dovecot 2.2.24 and from what I see, quota management with warning message is configured currently with "noenforcing". Our individual quota limit is stored in the users ldap DN which is fetched as I see from the logs and by "doveadm quota get -u" I tried to trigger the warning mail by going over the limit on my account step by step and can see that values are counted with the command above and in thunderbird by showing the orange and than red warning symbol at the bottom for me. But the warning mail script is not triggert. How may I debug this? /usr/local/bin/quota-warning.sh is owned currently by vmail and executable by vmail. Thanks for feedback and suggestion . /Götz

1 0

Dovecot lmtp
by Peter Fraser 13 Nov '16

13 Nov '16

Hi All I am migrating from dovecot-1.x where I had LDA running to dovecot2-2.2.26.0_1 where I am trying to set up LMTP. I have enabled a TCP/IP socket .Setting below. service lmtp { inet_listener lmtp { address = 127.0.0.1 port = 24 } } and put this additional entry in postfix virtual_transport = lmtp:127.0.0.1:24 in 10-mail.conf my mail location is below mail_location=maildir:~/Maildir:INBOX=~/Maildir/:INDEX=~/Maildir/tmp/index My problem is that when I enable lmtp, dovecot creates a new maildir at /home/vmail/user(a)domain.com and delivers the email there in a Maildir instead of using the default one at /home/vmail/username I researched it but I just can't seem to figure out why this is. I would really appreciate any help on this. Thanks in advance.

2 1

Redirect the emails from domain2 to domain1
by Quaquaraquà 11 Nov '16

11 Nov '16

Dear Dovecot and Exim users, I have a VPS using these two applications. I am transitioning from a domain_old to a domain_new. I'd like to redirect all the emails from domain_old to the local mailboxes of users @ domain_new. In exim I've assumed that it is enough to add domain_old to the list of local domains: domainlist local_domains = @ : domain_new : domain_old ... begin routers ... local_users: debug_print = "R: local_user for $local_part@$domain" driver = accept domains = +local_domains transport = dovecot_lmtp cannot_route_message = Unknown user However in Dovecot I'm checking both the username and the domain to perform the authentication: auth_username_format = %Lu passdb { driver = sql ; } password_query = SELECT username, domain, password FROM users WHERE username = '%n' AND domain = '%d' To have this system to work, I wish some special rule that rewrites the domain from domain_old to domain_new. But I'm not sure whether this needs to be done in exim or dovecot and how to add it? - Quaquaraqua'

3 2

How to Analyze Missing UIDs (and Files) in Maildirs?
by Jochen Bern 11 Nov '16

11 Nov '16

Hello everyone, I would like pointers on how to analyze the following situation, please: I'm running one test and one production dovecot IMAPS server for one of our platforms. The clients are essentially appliances we distribute, auth by client cert, virtual users only, mailboxes in maildir format: > auth_ssl_require_client_cert = yes > auth_ssl_username_from_cert = yes > auth_mechanisms = plain > ssl = required > ssl_cert = </etc/pki/dovecot/certs/... > ssl_key = </etc/pki/dovecot/private/... > ssl_ca = </etc/pki/dovecot/certs/... > ssl_verify_client_cert = yes > mail_location = maildir:~ > userdb { > driver = static > args = uid=... gid=... home=/home/.../%Ld_realm/%Ln > } > passdb { > driver = static > args = password=... > } The client certs have CNs unique to the appliance and no client besides that appliance is supposed to access the mailbox. Appliances take note of the UIDs they've seen (and not yet deleted) and expect to be able to re-access e-mails by the UIDs they know. (Needless to say, I keep my hands away from the cache files so as not to cause the UIDs to be reassigned.) The dovecot version used is updated along with the CentOS 6 source RPMs - which contain a 2.0.9 plus whatever patches CentOS backported - and receives two additional patches from me, one from current dovecot sources to improve closure of inactive SSL connections and one from me that turns the IMAP CREATE command into a NOP; the appliance code doesn't expect mailboxes to have folders besides INBOX. ------- QA is looking into an upcoming new feature that requires appliances to reread old e-mails, and got errors that UIDs the test appliances expected to still be on the (test) server weren't. I verified, the UIDs are indeed absent from the dovecot-uidlist files. The mails in question arrived *sometime* over the course of the last 12 months and must've vanished *sometime* since then ... ugh. No trace of what may have happened to them in any logs, of course. On the test server, I re-enabled logging of DELETE, UNDELETE and EXPUNGE commands, in case the appliances delete mails themselves and forget to update their own cache. Are there other IMAP commands that could remove mails, and thus should be added to the list? Would it be possible to have dovecot configured so that there's a log entry whenever a client tries to retrieve a UID that dovecot doesn't have in the maildir anymore? ------- While looking into the above issue, I noticed that a large number of mailboxes (test as well as production) have UIDs that *are* listed in dovecot-uidlist, yet, no corresponding file is present anymore. Example: > # grep -c : *_realm/$EXAMPLE_USER/dovecot-uidlist > 58 > # grep : *_realm/$EXAMPLE_USER/dovecot-uidlist | sed -e '2,57d' -e 's/ .*//' > 1 > 152 > # for PAIR in `grep : *_realm/$EXAMPLE_USER/dovecot-uidlist | sed -e 's/ .*:/:/'` ; do > > IMAP_UID=`echo $PAIR | sed -e 's/:.*//'`; BASE=`echo $PAIR | sed -e 's/.*://'` > > CNT=`find *_realm/$EXAMPLE_USER -type f -name "$BASE"'*' -ls | wc -l` > > if [ $CNT -ne 1 ]; then echo "Found $CNT files for UID $IMAP_UID"; fi; done > Found 0 files for UID 135 > Found 0 files for UID 136 > Found 0 files for UID 139 > Found 0 files for UID 142 > Found 0 files for UID 143 > Found 0 files for UID 144 > Found 0 files for UID 145 > Found 0 files for UID 150 > Found 0 files for UID 151 Is that normal behaviour? If not, how would I try to find out what happens there? Kind regards, -- Jochen Bern Systemingenieur Fon: +49 6151 9067-231 Fax: +49 6151 9067-290 E-Mail: jochen.bern(a)binect.de www.binect.de www.facebook.de/binect Binect GmbH Robert-Koch-Straße 9, 64331 Weiterstadt, DE Geschäftsführung: Christian Ladner, Dr. Frank Wermeyer, Nils Manegold Unternehmenssitz: Weiterstadt Register: Amtsgericht Darmstadt, HRB 94685 Umsatzsteuer-ID: DE 221 302 264 MAX 21-Unternehmensgruppe

1 0

Enterprise Edition: Any known access issues with the repo? Have existing accounts been expired?
by deoren 11 Nov '16

11 Nov '16

Hi, I'm getting errors when attempting to run apt-get update on an Ubuntu 14.04 box where I've had an existing EE installation for some time: > W: Failed to fetch https://apt.dovecot.fi/stable-2.2/ubuntu/trusty/dists/trusty/main/binary-am… HttpError401 > > W: Failed to fetch https://apt.dovecot.fi/stable-2.2/ubuntu/trusty/dists/trusty/main/binary-i3… HttpError401 > > E: Some index files failed to download. They have been ignored, or old ones used instead. I'm running 2.2.25.5 now and when I looked at the announcement forum[1] I see a posting[2] for 2.2.26.1, but nothing about repo changes. For what it is worth, I use the EE credentials on only a single node so I am hopefully not triggering any abuse thresholds. I tried accessing the URL used in the /etc/apt/sources.list.d/FILENAME.list file via a web browser and it isn't accepting the provided username/password. Have existing credentials been expired? If so, what is the next step to restore access? Thanks. References: [1] https://forum.open-xchange.com/forumdisplay.php?35-Dovecot-Announcements [2] http://software.open-xchange.com/products/dovecot/doc/Release_Notes_for_Dov…

2 1

Maildir filename has wrong S value - possible culprit
by Libor Pavlík 11 Nov '16

11 Nov '16

Hi, I'm new to dovecot but as I see in mailinglist archive this issue is old and I didn't find this in archive. One of cuplrits (I believe not the only possible) is spamassassin. It's added headers make exactly the difference between S value and filesize. Probably it's in the way emails are processed in "manufactory" of Qmail+Vpopmail+Spamassassin but now I'm not able to say how can it be repaired. As mentioned above I'm using solution with Qmail+Vpopmail+Spamassassin+Dovecot, my Dovecot version is 2.2.26.0. Libor Pavlík

1 0

post-delivery virus scan
by Brad Koehn 11 Nov '16

11 Nov '16

I have discovered that many times the virus definitions I use for scanning messages (ClamAV, with the unofficial signatures http://sanesecurity.com/usage/linux-scripts/) are updated some time after my server has received an infected email. It seems the virus creators are trying to race the virus definition creators to see who can deliver first; more than half of the infected messages are found after they’ve been delivered. Great. To help detect and remove the infected messages after they’ve been delivered to users’ mailboxes, I created a small script that iterates the INBOX and Junk mailbox directories, scans recent messages for viruses, and deletes them if found. The source of my script (run via cron) is here: https://gitlab.koehn.com/snippets/9 Unfortunately Dovecot doesn’t like it if messages are deleted (dbox) out from under it. I tried a doveadm force-resync on the folder containing the messages, but it seems Dovecot is still unhappy. At least on the new version (2.2.26.0) it doesn’t crash; 2.2.25 would panic and coredump when it discovered messages had been deleted. I’m wondering if there’s a better way to scan recent messages and eradicate them so the Dovecot isn’t upset when it happens. Maybe using doveadm search? Looking for suggestions. --- Brad

6 9

Re: How does one mark all messages as read (imap4flag "seen") with sieve?
by Ben Johnson 11 Nov '16

11 Nov '16

On 11/10/2016 2:02 AM, Aki Tuomi wrote: > Hi! > > Can you provide bt full from gbd? > > Install debug symbols and acquire core file > > Run gdb /path/to/bin /path/to/core > > Issue bt ful > > Send it to list. > > > Aki Tuomi > > Dovecot oy > > > > On November 10, 2016 at 2:42 AM Larry Rosenman <larryrtx(a)gmail.com> > wrote: > > looks to me from the coredump (although you pointed to the wrong binary) > that > deliver was PANIC()'ing with > > io_add(0x%x) called twice fd=%d, callback=%p -> %p > > I'm not sure what that message means, but maybe one of the dovecot folks > does. > > Are all the packages built together? > > Are you averse to compiling stuff yourself? Thanks so much for the assistance here, Larry and Aki. Aki, you had asked me to send this core-dump to the list when I asked about it back in September; I did post the "bt full" output at that time, but there were no further replies: http://www.dovecot.org/list/dovecot/2016-September/105428.html And for convenience, here is the "bt full" output I posted back then: http://pastebin.com/4xdGNXa6 So, this is where I'm confused: Larry, you mentioned "although you pointed to the wrong binary", which is a concern I had asked about back in September: http://www.dovecot.org/list/dovecot/2016-September/105424.html I still don't understand how this is pointing to the wrong binary: # gdb /usr/lib/dovecot/dovecot-lda /var/vmail/tmp/core-deliver-6-5000-5000-29125-1473732949 Is /usr/lib/dovecot/dovecot-lda not the binary that segfaulted here? Sure, the gdb output says, "Core was generated by `/usr/lib/dovecot/deliver ...", but on the system in question, that is a symlink pointing to /usr/lib/dovecot/dovecot-lda: # ls -lah /usr/lib/dovecot/deliver lrwxrwxrwx 1 root root 11 Sep 21 10:29 /usr/lib/dovecot/deliver -> dovecot-lda What am I missing here? The mismatch message does say something specific about this: warning: the debug information found in "/lib64/ld-2.23.so" does not match "/lib64/ld-linux-x86-64.so.2" (CRC mismatch). Is this the result of pointing to the wrong executable when calling "gdb"? If so, where is the correct executable to pass as the fist argument? Again, for convenience, the pipe script I'm using: http://pastebin.com/zXzBDcvG And the debug output from said pipe script: http://pastebin.com/rz2f4S4G My full "doveconf -n": http://pastebin.com/hCgpA009 Thanks! -Ben

1 0

service doveadm : ssl problems
by nerbrume＠free.fr 10 Nov '16

10 Nov '16

Hello, I'm using dovecot 2.2.13 on Debian stable. My users are authenticated through PAM, and stored in an LDAP backend I'm trying to set-up replication with ssl, following (mainly) this : http://wiki2.dovecot.org/Replication 1) I only diverted from the instructed setup by not setting "doveadm_port = 12345", as it would give me errors of the like: > Fatal: /var/run/dovecot/auth-userdb: Configured passdbs don't support crentials lookups (to see if user is proxied, because doveadm_port is set) but rather specifying the port in the mail_replica setting : "mail_replica = tcps:my.domain.com:1465" (following a mail from here : http://www.dovecot.org/list/dovecot/2016-September/105356.html) So far, this seems to be working for me. 2) However, I'm having ssl problems. I have a let's encrypt certificate, and have concatened the CA cert and my server cert in a fullchain.pem. Excerpt from my ssl config : > ssl = yes > ssl_cert = </etc/letsencrypt/live/my.domain.com/fullchain.pem > ssl_key = </etc/letsencrypt/live/my.domain.comi/privkey.pem doveadm return me these errors (sudo -u dovecot doveadm -v sync -u user tcps:my.domain.com:12345) : > doveadm(casoli): Info: Received invalid SSL certificate: unable to get local issuer certificate: /CN=my.domain.com > doveadm(casoli): Error: doveadm server disconnected before handshake: Received invalid SSL certificate: unable to get local issuer certificate: /CN=my.domain.com > doveadm(casoli): Fatal: Disconnected from remote: Received invalid SSL certificate: unable to get local issuer certificate: /CN=my.domain.com Which I can reproduce with openssl (openssl s_client -showcerts -CApath /etc/ssl/certs -connect my.domain.com:12345) : > (...) > Verify return code: 21 (unable to verify the first certificate) Indeed, in this case, dovecot only returns the local part of the certificate (my.domain.com) and not the full chain (with the intermediate CA). While testing regular IMAPS with openssl is ok (openssl s_client -showcerts -CApath /etc/ssl/certs -connect my.domain.com:993) > (...) > Verify return code: 0 (ok) And I can see the full chain. So, it's seems to me that doveadm is somehow wrongly serving my certificate, truncating it, but I can't see why, and if this is a misconfiguratin on my part. I can post more config files or message outputs if needed, I kept them redacted here for the sake of brevity. Regards, N

2 2

Dovecot 2 LDAP "unknown user"
by Peter Fraser 10 Nov '16

10 Nov '16

Hi All I am using Dovecot dovecot2-2.2.25_6 on FreeBSD 11. I am trying to set up LDAP authentication to Active Director as I had it in version 1 of Dovecot. My settings are at bottom. When I run doveadm auth test username, I get back root@BSD-11:/usr/local/etc/dovecot # doveadm auth test username Password: passdb: user auth succeeded extra fields: user=username root@BSD-11:/usr/local/etc/dovecot # But when I run telnet 127.0.0.1 110 and try to log in it says unknown user. Error below in maillog. BSD-11 dovecot: pop3: Error: Authenticated user not found from userdb, auth lookup id=2262958081 (client-pid=2273 client-id=1) Nov 1 15:15:41 BSD-11 dovecot: pop3-login: Internal login failure (pid=2273 id=1) (internal failure, 1 successful auths): user= root@BSD-11:/usr/local/etc/dovecot # doveconf -n # 2.2.25 (7be1766): /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 11.0-RELEASE-p1 i386 auth_debug = yes auth_verbose = yes listen = * login_greeting = Mail Server ready. mail_location = maildir:~/Maildir namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } ssl_cert = </usr/local/etc/certs/certs/dovecot.pem ssl_key = </usr/local/etc/certs/private/dovecot.pem userdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lda { mail_plugins = } #Contents of dovecot-ldap.conf.ext hosts = 192.168.153.143 dn = user(a)domain.com dnpass = password auth_bind = yes auth_bind_userdn = domain\%u ldap_version = 3 base = dc=domain,dc=com pass_filter = (&(objectclass=person)(uid=%u)) user_attrs = homeDirectory=/home/vmail/%u,uid=1002,gid=1002 Amy help would be appreciated.

3 9