- dovecot - dovecot.org

postmaster domain
by Timothy Murphy 04 Jan '16

04 Jan '16

I recently upgraded a remote server to CentOS-7.2, after which email stopped coming through. I suspect that this was probably due to the fact that I had started a version of dovecot installed some time ago. I found messages in /var/log/maillog like Jan 4 12:56:56 alfred postfix/lmtp[7612]: 20A662202B4: to=<root(a)gayleard.eu>, relay=alfred.gayleard.eu[private/dovecot-lmtp], delay=34272, delays=34272/0.16/0.01/0.05, dsn=4.3.0, status=deferred (host alfred.gayleard.eu[private/dovecot-lmtp] said: 451 4.3.0 <root(a)gayleard.eu> Invalid user settings. Refer to server log for more information. (in reply to RCPT TO command)) Googling for this, I found the suggestion that one should insert the following postmaster_address line in /etc/dovecot/conf.d/20-lmtp protocol lmtp { postmaster_address = postmaster(a)alfred.eu # Space separated list of plugins to load (default is global ail_plugins). mail_plugins = $mail_plugins sieve } (alfred.eu being the server's domain). This seems to have solved the problem, after re-starting dovecot. I'm wondering if this was an issue that arose some time ago, and if so whether my solution was the recommended one? -- Timothy Murphy gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin

1 0

Re: Howto get information about quota used
by Макаров Денис 04 Jan '16

04 Jan '16

I tried this for correct user: sudo doveadm quota get -u user Quota name Type Value Limit % User STORAGE 0 614400 0 User MESSAGE 0 - 0 Ok, limit is correct. But why value and % = 0? Via Thunderbird I see 52%. >> Hello guys! >> >> I have Dovecot server (version: 2.2.9) with quota and imap_quota plugins. >> >> I wanna know how to get information about quota used of current email. >> >> I can do this with IMAP client like Thunderbird, but how I can do it >> on server? > Try this: > > # doveadm quota get -A > ... > > p@rick > -- Best regards, *Makarov Denis* *email*: makarovdenis11(a)gmail.com <mailto:makarovdenis11@gmail.com>

1 1

How to debug lmtpd?
by kjonca＠o2.pl 04 Jan '16

04 Jan '16

1. I have dovecot installation with lmtp 2. there are some sieve filter which call mailpost to put mails in my news server. 3. SOME mails are not mailposted :( I do not know why. Moreover these mails filtered by dovecot-lda ARE mailposted whit the same sieve filter. 4. How can I debug lmtp and it's descendant processes? strace -ff only? KJ -- http://wolnelektury.pl/wesprzyj/teraz/ Boys, you have ALL been selected to LEAVE th' PLANET in 15 minutes!!

2 1

Double folders?
by Frank W 03 Jan '16

03 Jan '16

Hi, I upgraded my dovecot install from 2.0.19 to 2.2.19. I haved update the configuration, accordingly, but I when I open roundcube, I see multiple folders like sent, trash, facebook, etc... I not sure if am missing something or not. Here is my configure: [root@mgmt ~]# cat dovecot_config.txt # 2.2.19: /etc/dovecot/dovecot.conf # OS: Linux 3.4.4 armv5tel Gentoo Base System release 2.1 ext3 auth_mechanisms = plain login disable_plaintext_auth = no first_valid_gid = 207 first_valid_uid = 207 last_valid_gid = 207 last_valid_uid = 207 listen = *, [::] mail_gid = 207 mail_location = maildir:/var/vmail/%u/Maildir/:INDEX=/var/vmail/%u/indexes mail_plugins = quota mail_uid = 207 namespace { inbox = yes location = prefix = INBOX. separator = . name = } namespace { location = mailbox { special_use = \Drafts name = Drafts } mailbox { special_use = \Junk name = Junk } mailbox { special_use = \Sent name = Sent } mailbox { special_use = \Trash name = Trash } prefix = name = inbox } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocols = imap pop3 service replication-notify-fifo { name = aggregator } service anvil-auth-penalty { name = anvil } service auth-worker { user = $default_internal_user name = auth-worker } service { unix_listener { group = postfix mode = 0666 user = postfix path = /var/spool/postfix/private/auth } unix_listener { group = mail mode = 0666 user = mail path = auth-userdb } name = auth } service config { name = config } service dict-async { name = dict-async } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns_client } service doveadm-server { name = doveadm } service imap-hibernate { name = imap-hibernate } service imap { name = imap-login } service imap-urlauth { name = imap-urlauth-login } service imap-urlauth-worker { name = imap-urlauth-worker } service token-login/imap-urlauth { name = imap-urlauth } service imap-master { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service replicator-doveadm { name = replicator } service login/ssl-params { name = ssl-params } service stats-mail { name = stats } ssl_cert = </etc/postfix/ssl/mail.xxxxxx.net.crt ssl_cipher_list = ALL:!LOW:!SSLv2 ssl_key = </etc/postfix/ssl/mail.xxxxxxx.net.key userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lmtp { service replication-notify-fifo { name = aggregator } service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict-async { name = dict-async } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns_client } service doveadm-server { name = doveadm } service imap-hibernate { name = imap-hibernate } service imap { name = imap-login } service imap-urlauth { name = imap-urlauth-login } service imap-urlauth-worker { name = imap-urlauth-worker } service token-login/imap-urlauth { name = imap-urlauth } service imap-master { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service replicator-doveadm { name = replicator } service login/ssl-params { name = ssl-params } service stats-mail { name = stats } } protocol lda { service replication-notify-fifo { name = aggregator } service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict-async { name = dict-async } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns_client } service doveadm-server { name = doveadm } service imap-hibernate { name = imap-hibernate } service imap { name = imap-login } service imap-urlauth { name = imap-urlauth-login } service imap-urlauth-worker { name = imap-urlauth-worker } service token-login/imap-urlauth { name = imap-urlauth } service imap-master { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service replicator-doveadm { name = replicator } service login/ssl-params { name = ssl-params } service stats-mail { name = stats } } protocol imap { mail_plugins = quota imap_quota service replication-notify-fifo { name = aggregator } service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict-async { name = dict-async } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns_client } service doveadm-server { name = doveadm } service imap-hibernate { name = imap-hibernate } service imap { name = imap-login } service imap-urlauth { name = imap-urlauth-login } service imap-urlauth-worker { name = imap-urlauth-worker } service token-login/imap-urlauth { name = imap-urlauth } service imap-master { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service replicator-doveadm { name = replicator } service login/ssl-params { name = ssl-params } service stats-mail { name = stats } } protocol pop3 { service replication-notify-fifo { name = aggregator } service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict-async { name = dict-async } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns_client } service doveadm-server { name = doveadm } service imap-hibernate { name = imap-hibernate } service imap { name = imap-login } service imap-urlauth { name = imap-urlauth-login } service imap-urlauth-worker { name = imap-urlauth-worker } service token-login/imap-urlauth { name = imap-urlauth } service imap-master { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service replicator-doveadm { name = replicator } service login/ssl-params { name = ssl-params } service stats-mail { name = stats } }

2 1

Released Pigeonhole v0.4.11.rc1 for Dovecot v2.2.21
by Stephan Bosch 03 Jan '16

03 Jan '16

Hello Dovecot users, First, a happy new year to you all! :) In the last few weeks I got quite a few bug reports. I also found a few things myself. Some of the bugs are quite annoying, so a new release is necessary. First, I release RC1. If all is well, I'll release the definitive Pigeonhole v0.4.11 within the next few days. Changelog v0.4.11: - Sieve mime extension: Fixed the header :mime :anychild test to work properly outside a foreverypart loop. - Several fixes in message body part handling: - Fixed assert failure occurring when text extraction is attempted on an empty or broken text part. - Fixed assert failure in handling of body parts that are converted to text. - Fixed header unfolding for (mime) headers parsed from any mime part. - Fixed trimming for (mime) headers parsed from any mime part. - Fixed erroneous changes to the message part tree structure performed when re-parsing the message. - LDA Sieve plugin: Fixed logging of actions; sometimes the configured log format was not followed. - LDA Sieve plugin: Fixed bug in error handling of script storage initialization. - Sieve Extprograms plugin: Ignored ENOTCONN error in shutdown(fd, SHUT_WR) call. - Fixed duplication of discard actions in the script result. Each discard was counted as a separate action, which means that action limit would be crossed too early. - Made sure that quota errors never get logged as errors in syslog. - Fixed handling of implicit keep for a partially executed transaction that yielded a temporary failure. - Fixed handling of global errors. If master and user error handler were identical, in some cases the log message could be lost. - Fixed AIX compile issue in message body parser. The release is available as follows: http://pigeonhole.dovecot.org/releases/2.2/rc/dovecot-2.2-pigeonhole-0.4.11… http://pigeonhole.dovecot.org/releases/2.2/rc/dovecot-2.2-pigeonhole-0.4.11… Refer to http://pigeonhole.dovecot.org and the Dovecot v2.x wiki for more information. Have fun testing this release candidate and don't hesitate to notify me when there are any problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

1 0

Howto get information about quota used
by Макаров Денис 03 Jan '16

03 Jan '16

Hello guys! I have Dovecot server (version: 2.2.9) with quota and imap_quota plugins. I wanna know how to get information about quota used of current email. I can do this with IMAP client like Thunderbird, but how I can do it on server? doveconf -n | grep quota mail_plugins = quota, antispam quota = maildir:User quota_exceeded_message = Message quota_rule = *:storage=100M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u quota_warning3 = -storage=100%% quota-warning below %u service quota-warning { executable = /usr/local/bin/quota-warning.sh mail_plugins = quota imap_quota mail_plugins = quota sieve For each mailboxes I use quota limits from MySQL. -- С уважением, *Макаров Денис* *почта*: makarovdenis11(a)gmail.com <mailto:makarovdenis11@gmail.com> Best regards, *Makarov Denis* *email*: makarovdenis11(a)gmail.com <mailto:makarovdenis11@gmail.com>

2 1

SASL binds
by Brendan Kearney 01 Jan '16

01 Jan '16

i am looking to get SASL binds working in Dovecot for userdb lookups, and i am not sure what i might be doing wrong. Dovecot version - 2.2.19 running on Fedora 22. MIT Kerberos and OpenLDAP are being used. my LDAP configs: uris = ldap://server1.bpk2.com ldap://server2.bpk2.com sasl_bind = yes sasl_mech = gssapi sasl_realm = BPK2.COM sasl_authz_id = imap/imap.bpk2.com(a)BPK2.COM base = dc=bpk2,dc=com the above results in the below error logs: Jan 01 13:56:58 mail auth[16747]: GSSAPI Error: Unspecified GSS failure. Minor code may provide more information (No Kerberos credentials available) Jan 01 13:56:58 mail dovecot[16722]: auth-worker(16747): Error: LDAP: binding failed (dn (none)): Local error, SASL(-1): generic failure: GSSAPI Error: Unspecified GSS failure. Minor code may provide more information (No Kerberos credentials available) i am assuming the keytab, /etc/dovecot/dovecot.keytab would be used to bind to the directory, but i am not sure. the auth_krb5_keytab directive is set with the absolute path and keytab name. is there something i am missing, such as a /etc/sasl2/dovecot.conf file? in the directory, i am mapping the Kerberos ID to LDAP user object as such: uid=imap\/(.*).bpk2.com,cn=bpk2.com,cn=gssapi,cn=auth uid=mda,ou=processUsers,ou=Users,dc=bpk2,dc=com if i change the sasl_authz_id to uid=mda,ou=processUsers,ou=Users,dc=bpk2,dc=com, and restart dovecot, i still get the same error. can anyone shed light on where i am going wrong? thanks in advance, brendan

1 0

doveadm expunge no longer works
by Fabian Groffen 31 Dec '15

31 Dec '15

Heya, Just upgraded from 2.2.19 to dovecot-2.2.21 and noticed expunging mail no longer works. # doveadm expunge -u theuser MAILBOX spam all Fatal: expunge: To avoid accidents, each branch in search query must contain something else besides MAILBOX (e.g. just add "all" if you want everything) Clearly, I've already got all in there, so I tried capitalising, etc. Looking at the code, I see expunge_search_args_is_msgset_or_ok apparently is failing. I'm wondering if this function [1] is actually doing what it is supposed to do, since it uses return, instead a var to figure out whether it is ok or not. In my case, just because it finds MAILBOX it returns without looking whether there is any further arguments. Or am I missing the point here (and how should I expunge a folder of mail?) Thanks, Fabian [1] https://github.com/dovecot/core/blob/6971937a6f3e93844dbd43bdbe903628e21a94… -- Fabian Groffen Gentoo on a different level

1 1

sieve-filter to script fails with SHUT_WR
by Mark Stover 31 Dec '15

31 Dec '15

Trying to make vnd.dovecot.filter to exchange an email with my script. (I have a vnd.dovecot.pipe script working, so I'm pretty sure it's not the configuration...) I'm passing the email using stdin/stdout and _not_ using sockets. My script receives the email and processes it, but the filter process fails: lda(<username>): Error: shutdown(/usr/local/lib/dovecot-sieve/sieve-filter/CleanAttachments.py, SHUT_WR) failed: Socket is not connected lda(<username>): Error: sieve: 20-filter-incoming: line 15: filter action: failed to execute to program `CleanAttachments.py' Not sure, what I'm doing wrong... Thanks, Mark $ doveconf -n # 2.2.21 (5345f22): /usr/local/etc/dovecot/dovecot.conf # Pigeonhole version 0.4.9 (357ac0a0e68b+) # OS: Darwin 15.2.0 x86_64 lda_mailbox_autocreate = yes mail_location = maildir:~/Maildir maildir_broken_filename_sizes = yes maildir_very_dirty_syncs = yes plugin { sieve = file:~/.dovecot/sieve;active=~/.dovecot/sieve/user.sieve sieve_before = /usr/local/lib/dovecot-sieve/sieve.d/ sieve_execute_bin_dir = /usr/local/lib/dovecot-sieve/sieve-execute sieve_extensions = +vnd.dovecot.pipe +vnd.dovecot.execute +vnd.dovecot.filter +vnd.dovecot.debug sieve_filter_bin_dir = /usr/local/lib/dovecot-sieve/sieve-filter sieve_pipe_bin_dir = /usr/local/lib/dovecot-sieve/sieve-pipe sieve_plugins = sieve_extprograms sieve_user_log = ~/.dovecot/sieve/sieve.log } postmaster_address = mstover(a)cisco.com protocol lda { info_log_path = log_path = mail_plugins = " sieve" } Sieve Script: require [ "variables", "envelope", "vnd.dovecot.debug", "vnd.dovecot.filter" ]; if envelope :matches "to" "*" { set "to" "${1}"; } if envelope :matches "from" "*" { set "from" "${1}"; } debug_log "Received message TO=${to} FROM=${from}"; filter "CleanAttachments.py"; debug_log "Returned from CleanAttachments"; if envelope :matches "to" "*" { set "to" "${1}"; } if envelope :matches "from" "*" { set "from" "${1}"; } debug_log "Returned message TO=${to} FROM=${from}";

2 2

LMTP crashes on Debian with dovecot backports from rename-it.nl
by Christian Schmidt 30 Dec '15

30 Dec '15

Hello dovecot-users, we're running Debian 7.9 with dovecot from Stephan Bosch's repository: deb http://xi.rename-it.nl/debian/ oldstable-auto/dovecot-2.2 main Starting with dovecot 2.2.20-1 build 28, we suddenly discovered that some mails (to be locally delivered) "got stuck". dovecot's log revealed messages like the following one: Dec 29 09:56:50 mailhost dovecot: lmtp(MAILRECIPIENT(a)chemie.uni-hamburg.de): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x8360f) [0x7f58fce4f60f] -> /usr/lib/dovecot/libdovecot.so.0(+0x8366e) [0x7f58fce4f66e] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f58fcdf8a3e] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0x3cc75) [0x7f58fd107c75] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0xabeda) [0x7f58fd176eda] -> /usr/lib/dovecot/libdovecot-storage.so.0(index_mail_get_first_header+0xba) [0x7f58fd17723a] -> /usr/lib/dovecot/libdovecot-storage.so.0(mail_get_first_header+0x38) [0x7f58fd108cd8] -> /usr/lib/dovecot/modules/lib20_mail_log_plugin.so(+0x1b5c) [0x7f58fb16cb5c] -> /usr/lib/dovecot/modules/lib20_mail_log_plugin.so(+0x22e9) [0x7f58fb16d2e9] -> /usr/lib/dovecot/modules/lib15_notify_plugin.so(notify_contexts_mail_copy+0x46) [0x7f58fb371576] -> /usr/lib/dovecot/modules/lib15_notify_plugin.so(+0x2750) [0x7f58fb372750] -> /usr/lib/dovecot/modules/lib10_quota_plugin.so(+0xbc20) [0x7f58fb580c20] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_copy+0x7d) [0x7f58fd11305d] -> /usr/lib/dovecot/libdovecot-lda.so.0(mail_deliver_save+0x171) [0x7f58fd4019c1]-> /usr/lib/dovecot/libdovecot-lda.so.0(mail_deliver+0x11b) [0x7f58fd401dfb] -> dovecot/lmtp [DATA MAILRECIPIENT(a)chemie.uni-hamburg.de](+0x7263) [0x7f58fd831263] -> dovecot/lmtp [DATA MAILRECIPIENT(a)chemie.uni-hamburg.de](+0x79d9) [0x7f58fd8319d9] -> /usr/lib/dovecot /libdovecot.so.0(io_loop_call_io+0x5b) [0x7f58fce6282b] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0xd7) [0x7f58fce63c07] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x25) [0x7f58fce628d5] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7f58fce62a78] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f58fcdfe443] -> dovecot/lmtp [DATA MAILRECIPIENT(a)chemie.uni-hamburg.de](main+0x19c) [0x7f58fd82f8dc] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7f58fca5fead] -> dovecot/lmtp [DATA MAILRECIPIENT(a)chemie.uni-hamburg.de](+0x59ad) [0x7f58fd82f9ad] Dec 29 09:56:50 mailhost dovecot: lmtp(MAILRECIPIENT(a)chemie.uni-hamburg.de): Fatal: master: service(lmtp): child 15897 killed with signal 6 (core dumps disabled) Dec 29 09:56:51 mailhost dovecot: lmtp(MAILRECIPIENT(a)chemie.uni-hamburg.de): Panic: file ../../../src/lib/array.h: line 219 (array_idx_i): assertion failed: (idx * array->element_size < array->buffer->used) All dovecot builds newer than 2.2.20-1~auto+26 show the same behaviour. Is there anything we can do? # doveconf -n # 2.2.20 (): /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.10 # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.9 ext4 auth_default_realm = chemie.uni-hamburg.de auth_master_user_separator = * auth_mechanisms = plain login auth_verbose = yes login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c %k mail_gid = vmail mail_location = maildir:/mail/%d/%n/Maildir mail_plugins = acl mail_log notify quota zlib mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart imapflags notify namespace { list = children location = maildir:/mail/%%d/%%n/Maildir:INDEX=/mail/%d/%n/shared/%%u:CONTROL=/mail/%d/%n/shared/%%u prefix = SHARED/%%u/ separator = / type = shared } namespace inbox { hidden = no inbox = yes list = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { auto = no special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = INBOX/ separator = / subscriptions = yes type = private } passdb { args = /etc/dovecot/deny-users deny = yes driver = passwd-file } passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_shared_dict = file:/var/lib/dovecot/shared-mailboxes mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size quota = maildir:Mailbox-Quota quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = file:~/sieve;active=~/.dovecot.sieve sieve_extensions = +notify +imapflags zlib_save = gz zlib_save_level = 6 } pop3_client_workarounds = outlook-no-nuls oe-ns-eoh postmaster_address = postmaster(a)chemie.uni-hamburg.de protocols = " imap lmtp sieve pop3" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_min_avail = 8 service_count = 0 vsz_limit = 256 M } service imap { executable = imap postlogin process_limit = 1024 vsz_limit = 512 M } service lmtp { inet_listener lmtp { address = 127.0.0.1 port = 24 } unix_listener /var/spool/postfix/private/lmtp-dovecot { group = postfix mode = 0660 user = postfix } } service pop3-login { inet_listener pop3 { port = 0 } inet_listener pop3s { port = 995 ssl = yes } } service pop3 { executable = pop3 postlogin } service postlogin { executable = script-login -d rawlog } ssl = required ssl_ca = </ssl/CA.pem ssl_cert = </ssl/cert.pem ssl_key = </ssl/cert.key ssl_protocols = !SSLv2 !SSLv3 syslog_facility = daemon userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes protocol lmtp { mail_plugins = acl mail_log notify quota zlib sieve } protocol lda { mail_plugins = acl mail_log notify quota zlib sieve } protocol imap { mail_max_userip_connections = 50 mail_plugins = acl mail_log notify quota zlib imap_acl imap_quota imap_zlib } protocol sieve { mail_max_userip_connections = 100 } protocol pop3 { mail_max_userip_connections = 50 } Thanks & kind regards, Christian Schmidt -- No signature available.

3 6