- dovecot - dovecot.org

postfix/dovecot - [private/dovecot-lmtp]: No such file or directory
by soko.tica 22 Feb '16

22 Feb '16

Hello list, I am trying to send a mail message from root to a system user on the same box. While postfix functions without dovecot properly, once dovecot is installed, I get the message from logs as set in the subject line - that postfix/lmpt cannot connect to [private/dovecot-lmtp]: No such file or directory Also, user's ~/.Maildir aren't created, although there is such instructions in dovecot. Finally, doveconf -n says there is no ssl enabled, although I explicitly set it in /conf.d/10-ssl.conf Below are dmesg, postconf -n, doveconf -n and a snippet from /var/log/mail.log Please advise. Thanks in advance. $dmesg [ 0.000000] Linux version 3.18.26-x1-64 (root(a)dev0001.support.domain.tld) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Mon Feb 8 11:43:41 GMT 2016 [ 0.740773] pps_core: LinuxPPS API ver. 1 registered ================ $ postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix default_transport = error delay_warning_time = 4h inet_interfaces = loopback-only mailbox_size_limit = 0 mailbox_transport = lmtp:unix:private/dovecot-lmtp mydestination = $myhostname localhost.$mydomain localhost $mydomain myhostname = mail.domain.tld mynetworks = [::ffff:127.0.0.0]/104 [::1]/128 myorigin = $myhostname notify_classes = resource, software readme_directory = no recipient_delimiter = + relay_domains = $mydestination relay_transport = error smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes ========================== $ doveconf -n # 2.2.13: /etc/dovecot/dovecot.conf # OS: Linux 3.18.26-x1-64 x86_64 Debian 8.3 hostname = mail.domain.tld lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lda_original_recipient_header = X-Original-To mail_location = maildir:~/Maildir maildir_very_dirty_syncs = yes namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / type = private } passdb { driver = pam } passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } postmaster_address = postmaster(a)mail.domain.tld protocols = lmtp service lmtp { unix_listener lmtp { group = postfix mode = 0600 user = postfix } } ssl = no ssl_cert = </etc/dovecot/dovecot.pem ssl_key = </etc/dovecot/private/dovecot.pem userdb { driver = passwd } userdb { driver = passwd } protocol lmtp { mail_fsync = optimized } protocol lda { mail_fsync = optimized } ============== $ cat /var/log/mail.log Feb 21 23:20:40 boxname dovecot: master: Dovecot v2.2.13 starting up for lmtp (core dumps disabled) Feb 21 23:22:28 boxname postfix/pickup[32138]: EA06822140: uid=0 from=<root> Feb 21 23:22:28 boxname postfix/cleanup[32177]: EA06822140: message-id=<20160221232228.EA06822140(a)mail.domain.tld> Feb 21 23:22:28 boxname postfix/qmgr[32139]: EA06822140: from=<root(a)mail.domain.tld>, size=333, nrcpt=1 (queue active) Feb 21 23:22:29 boxname postfix/lmtp[32180]: EA06822140: to=<brn(a)mail.domain.tld>, orig_to=<brn>, relay=none, delay=0.06, delays=0.02/0.01/0.04/0, dsn=4.4.1, status=deferred (connect to mail.domain.tld[private/dovecot-lmtp]: No such file or directory)

2 1

Maildir++ and fs-layout
by Chris 20 Feb '16

20 Feb '16

Dear All, can I use Maildir++ Layout for private namespace and fs-layout for public namespace on the same server, provided that the hierarchy separator is the same (.)? Are all parts of dovecot (especially deliver, sieve and lmtp) compatible with fs-layout? Are there any restrictions I have to obey? - Chris

2 2

pigeonhole vnd.dovecot.pipe
by Dan Ragle 20 Feb '16

20 Feb '16

Ok, I have pigeonhole setup on my CentOS 6 box and it's working great; the filters are doing almost everything I want them to. I now find that I'd like to add piping support to pigeonhole scripts, and as I am running CentOS 6 (Dovecot 2.0.9, with pigeonhole 0.2.2) I'm trying to get the vnd.dovecot.pipe extension working. Couldn't find that anywhere in the repos, so went to the source as explained on this page: http://wiki2.dovecot.org/Pigeonhole/Sieve/Plugins/Pipe But I'm not able to get it to work. Here's what I've tried so far: 1.) Installed dovecot-devel-2.0.9 (yum install dovecot-devel) 2.) Downloaded the sieve-pipe source (hg clone http://hg.rename-it.nl/pigeonhole-0.2-sieve-pipe/) 3.) In the new sieve-pipe directory: a.) ./autogen.sh (appeared to go smoothly) b.) ./configure --with-dovecot=/usr/lib64/dovecot --with-pigeonhole=/usr/include/dovecot/sieve (again, ok) c.) make This one failed, complaining that sieve-ext-copy.h was unavailable. Found a copy of the file online at http://www.opensource.apple.com/source/dovecot/dovecot-239/dovecot-pigeonho… copied it into /usr/include/dovecot/sieve/ and reran the make, this time no errors. d.) make install (no errors) 4.) Added the sieve_plugins = sieve_pipe config into 90-sieve.conf 5.) Restarted dovecot. It complained thus: Starting Dovecot Imap: managesieve: Fatal: opendir(/usr/lib64/dovecot/sieve) failed: No such file or directory doveconf: Error: managesieve-login: dump-capability process returned 89 6.) Looking through the make install output, I noticed that the new libs had been installed in /usr/local/lib/dovecot/sieve. So, cd /usr/lib64/dovecot ln -s /usr/local/lib/dovecot/sieve sieve 7.) Restarted dovecot. This time a different complaint: Starting Dovecot Imap: managesieve: Error: dlopen(/usr/lib64/dovecot/sieve/lib90_sieve_pipe_plugin.so) failed: /usr/lib64/dovecot/sieve/lib90_sieve_pipe_plugin.so: undefined symbol: uni_utf8_to_ucs4_n managesieve: Fatal: Couldn't load required plugins doveconf: Error: managesieve-login: dump-capability process returned 89 And now without digging into code I'm stuck. I'm guessing I have some incompatibility issues. Do I need to be running the 32bit dovecot for this to work? Or is there some other mismatch or misstep I've made along the way? Was I correct in assuming the necessary dovecot-pigeonhole-devel stuph came with the dovecot-devel install? There is no separate dovecot-pigeonhole-devel package in the main repos (the dovecot-pigeonhole package I have loaded is 2.0.9, looks like it was just named to match the corresponding dovecot package. The version appears to be 0.2.2, as it is adding a X-Sieve: Pigeonhole Sieve 0.2.2 header into redirected messages). Thanks! Dan

2 1

RPMs for Fedora and RHEL/CentOS
by Toooode 20 Feb '16

20 Feb '16

Hi Link on http://www.dovecot.org/download.html for RPMs for Fedora and RHEL/CentOS is not working. It seams that atrpms repo is dead for some time now Can you please update this and suggest me alternative trusted repo with newest dovecot packages for RHEL/CentOS? Thank you

4 6

Bug Report: %% variables not expanded properly with shared namespace using . as separator
by Hugh Bragg 19 Feb '16

19 Feb '16

I think this is a bug. I'd expect that location %% variables are translated the same way % variables are interpreted, but apparently this isn't the case. virtual folders work fine, but my shared folders fail because of the . in the domain name. What I get is the following: # doveadm acl debug -u user1(a)domain1.com.au shared.user2(a)domain2.com.au doveadm(user1(a)domain1.com.au): Error: Mailbox 'com.au' in namespace 'shared.user2@domain2.' doesn't exist in /var/mail/vhosts/domain2/user2/mail/.com.au I know there is a similar report for usernames, but these should be interpreted at the top level and not inside the maildir. I hope this is enough info. Let me know if I can supply any further information. Hugh Here is my config: # dovecot -n # 2.2.21 (5345f22): /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.11 (6ddf62b87f60+) # OS: Linux 4.3.5-300.fc23.x86_64 x86_64 Fedora release 23 (Twenty Three) auth_mechanisms = plain login auth_socket_path = /var/run/dovecot/auth-userdb imap_client_workarounds = tb-extra-mailbox-sep listen = * log_path = /var/log/dovecot.log mail_access_groups = mail, vmail mail_home = /var/mail/vmail/%d/%n mail_location = maildir:~/mail mail_plugins = virtual, acl managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } namespace others { list = children location = maildir:/var/mail/vhosts/%%d/%%n/mail:INDEX=/var/mail/vhosts/%d/%n/shared/%%u prefix = shared.%%u. separator = . subscriptions = yes type = shared } namespace virtual { location = virtual:/var/mail/vhosts/%d/%n/virtual prefix = virtual. separator = . } passdb { args = scheme=PLAIN username_format=%u /etc/dovecot/dovecot-users driver = passwd-file } plugin { acl = vfile acl_shared_dict = file:/var/mail/vhosts/shared-mailboxes.db sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = /var/mail/vhosts/sieve-global } protocols = imap lmtp sieve service auth-worker { user = vmail } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0660 user = vmail } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 0 ssl = yes } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } } service pop3-login { inet_listener pop3 { port = 0 } inet_listener pop3s { port = 0 } } ssl = required ssl_cert = </etc/pki/dovecot/certs/hjbmx.ddns.net.cert.pem ssl_cipher_list = PROFILE=SYSTEM ssl_key = </etc/pki/dovecot/private/hjbmx.ddns.net.key.pem userdb { args = uid=vmail gid=vmail home=/var/mail/vhosts/%d/%n driver = static } protocol lmtp { mail_plugins = virtual, acl , sieve } protocol lda { mail_plugins = virtual, acl , sieve } protocol imap { mail_plugins = virtual, acl , imap_acl }

2 2

edit ACL files
by Chris 19 Feb '16

19 Feb '16

Dear All, is it possible to edit ACL files regularly with an editor or is there any reason to use doveadm? - Chris

4 5

shared folders not working with . separator
by Hugh Bragg 18 Feb '16

18 Feb '16

Hi, I've been trying this for weeks and never managed to get my mail client to see shared folders. Apparently imap_acl works fine as I can see these entries in the dovecot-acl-list files and the correct entries persist in the client. This is my first dovecot setup so I hope I've configured it right. Everything else works beautifully, thanks. # dovecot -n # 2.2.21 (5345f22): /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.11 (6ddf62b87f60+) # OS: Linux 4.3.5-300.fc23.x86_64 x86_64 Fedora release 23 (Twenty Three) auth_mechanisms = plain login auth_socket_path = /var/run/dovecot/auth-userdb imap_client_workarounds = tb-extra-mailbox-sep listen = * log_path = /var/log/dovecot.log mail_access_groups = mail, vmail mail_home = /var/mail/vmail/%d/%n mail_location = maildir:~/mail mail_plugins = virtual, acl managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart mbox_write_locks = fcntl namespace { location = virtual:/var/mail/vhosts/%d/%n/virtual prefix = virtual. separator = . } namespace { list = children location = maildir:/var/mail/vhosts/%%d/%%n/mail:INDEX=/var/mail/vhosts/%d/%n/shared/%%u:CONTROL=/var/mail/vhosts/%d/%n/shared/%%u prefix = shared.%%u. separator = . subscriptions = yes type = shared } namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } mailbox virtual/All { comment = All my messages special_use = \All } mailbox virtual/Flagged { comment = All my flagged messages special_use = \Flagged } prefix = } passdb { args = scheme=PLAIN username_format=%u /etc/dovecot/dovecot-users driver = passwd-file } plugin { acl = vfile acl_shared_dict = file:/var/mail/vhosts/shared-mailboxes.db sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = /var/mail/vhosts/sieve-global } protocols = imap lmtp sieve service auth-worker { user = vmail } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0660 user = vmail } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 0 ssl = yes } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } } service pop3-login { inet_listener pop3 { port = 0 } inet_listener pop3s { port = 0 } } ssl = required ssl_cert = </etc/pki/dovecot/certs/dovecot.cert.pem ssl_cipher_list = PROFILE=SYSTEM ssl_key = </etc/pki/dovecot/private/dovecot.key.pem userdb { args = uid=vmail gid=vmail home=/var/mail/vhosts/%d/%n driver = static } protocol lmtp { mail_plugins = virtual, acl , sieve } protocol lda { mail_plugins = virtual, acl , sieve } protocol imap { mail_plugins = virtual, acl , imap_acl }

4 8

Re: dovecot Digest, Vol 154, Issue 14
by Richard Platel 18 Feb '16

18 Feb '16

Thanks, Hajo This mostly works, but we can’t seem to send an arbitrary mailbox name with UserDB, we have to initialize it in the config: "namespace/inbox/mailbox=Junk namespace/inbox/mailbox/Junk/name"="Spam" seems to initialize the folder somehow so that the subsequent "namespace/inbox/mailbox/Junk/auto"="subscribe" and "namespace/inbox/mailbox/Junk/special_use"="\Junk" have something to act upon. (the first line doesn't work quite properly, however - it ends up causing a folder named "" to show up) we've noticed that if we set a very minimal config for the mailbox in the main config (that wouldn't cause the mailbox to be autocreated), that this also initializes the folder name allowing for subsequent auto and subscribe directives to be processed for it: namespace inbox { inbox = yes mailbox "Spam" { auto = no } } is there some userdb response that will simply initialize the folder (without doing any name remapping) in the same way that the above config lines do? we have tried a few things based off Hajo's first line, but nothing we guess at seems to do the trick. ie: "namespace/inbox/mailbox"="Spam" "namespace/inbox/mailbox=Spam"=“Spam" > > ------------------------------ > > Message: 2 > Date: Tue, 9 Feb 2016 23:33:53 +0100 > From: Hajo Locke <Hajo.Locke(a)gmx.de> > To: dovecot(a)dovecot.org > Subject: Re: Per-user special folder? > Message-ID: <56BA6951.8010000(a)gmx.de> > Content-Type: text/plain; charset=windows-1252; format=flowed > > Hello, > > Am 09.02.2016 um 22:28 schrieb Richard Platel: >> Hi >> >> It's possible to mark some folders as special use for IMAP in the config like: >> >> namespace inbox { >> mailbox Spam { >> special_use = \Junk >> } >> } >> >> >> Our webmail allows users to use an arbitrary folder for Spam, and we have this settings and we'd like to return it in from our UserDB (which is a custom dict proxy). >> >> For testing were able to set a namespace parameter like "separator" by returning: >> "namespace/inbox/separator" : "=", >> >> from UserDB, but can't figure out a way to set mailbox settings, >> >> "namespace/inbox/mailbox Spam/special_use" : "\Junk", for example doesn't work. >> >> Is there a way to return this setting from a UserDB query? >> > we use this a lot with userdb to allow individual folders marked as special. > your userbd-query should return something like this: > > namespace/inbox/mailbox=Junk namespace/inbox/mailbox/Junk/name=Spam > namespace/inbox/mailbox/Junk/auto=subscribe > namespace/inbox/mailbox/Junk/special_use=\Junk > Spam is visible name in this case. > > Hajo

2 2

doveadm backup to local drive
by Terry Barnum 17 Feb '16

17 Feb '16

I'm trying to get doveadm to backup all users to a local drive without any luck. $ sudo doveadm backup -A /Volumes/mail_bak/mailstore_backup/ Error: User listing returned failure doveadm: Error: Failed to iterate through some users The doveadm-backup man page has the instruction to make sure the iterate query matches the database layout but I'm not sure what that means. If the user_query in dovecot-sql.conf.ext looks like this, what should the iterate_query look like? user_query = \ SELECT '/opt/local/virtual/%d/%n/mail' as home, \ 'maildir:/opt/local/virtual/%d/%n/mail' as mail, 501 as uid, \ 501 as gid, concat("*:storage=", quota) AS quota \ FROM mailbox WHERE username = "%u" AND active = "1" # Query to get a list of all usernames. iterate_query = SELECT username AS user FROM users Thanks, -Terry Terry Barnum digital OutPost Carlsbad, CA http://www.dop.com 800/464-6434

1 1

Dovecot IMAP permissions issue (see original)
by Steve Cole 17 Feb '16

17 Feb '16

/ >/What purpose does vpopmail serve that dovecot alone does not? Isn't it > just an ancient leftover from historic qmail times? qmail and vpopmail are still quite prominent on the Internet. I see no reason to change my setup at the moment. Possibly I could re-architect to read user info directly from mysql but that would not help with the fact that dovecot then likely read or write as the wrong userid on the system (since mailboxes are virtual). Have recreated the same issue (sans mysql) on another vpopmail system. Regardless, it is a bug. From my process list: 25813 vpopmail 20 0 26468 4984 4016 R 0.7 0.0 0:00.02 imap 26730 vpopmail 20 0 28332 5940 4212 S 0.7 0.0 0:00.06 imap For certain, imap being ANY other user than root means that the /var/run/dovecot/imap-* sockets would be unwritable.

1 0