- dovecot - dovecot.org

FTS not indexing new folders (mailboxes)
by Francisco Wagner C. Freire 24 Sep '15

24 Sep '15

Hello, Im getting problem on FTS on new created folders (mailboxes). How to simulate: - Enable FTS (solr on our case) - Create a new folder (mailbox) - Move some message to that mailbox - Try to search for the message contents *doveadm search -u user@domain text sometext* # Found nothing, but if i move the message to another mailbox, the search catch the message. # I tried doveadm index command but no response as well # This works only after a full fts rescan *doveadm fts rescan -u user@domain* # And now, works *doveadm search -u user@domain text sometext3c7b60241443ba55af680000cc4d0d4b 1* # My dovecot version = 2.2.18 (EE) # My fts config: fts = solr fts_autoindex = yes fts_autoindex_max_recent_msgs = 50 fts_solr = url=http://127.0.0.1:8080/solr/ Anyone got this problem?

3 2

Can't receive email
by lists＠lazygranch.com 24 Sep '15

24 Sep '15

No problem sending email, but I can't receive email. Diagnostics follow: a login user(a)domain.com password a OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS BINARY MOVE SPECIAL-USE] Logged in b select inbox * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 9 EXISTS * 1 RECENT * OK [UNSEEN 9] First unseen. * OK [UIDVALIDITY 1439944213] UIDs valid * OK [UIDNEXT 10] Predicted next UID * OK [HIGHESTMODSEQ 2] Highest b OK [READ-WRITE] Select completed (0.017 secs). c list "" * * LIST (\HasNoChildren \Trash) "." Trash * LIST (\HasNoChildren) "." Queue * LIST (\HasNoChildren \Sent) "." Sent * LIST (\HasNoChildren \Drafts) "." Drafts * LIST (\HasNoChildren) "." INBOX c OK List completed (0.001 secs). d lsub "" * * LSUB (\Trash) "." Trash * LSUB () "." Queue * LSUB (\Sent) "." Sent * LSUB (\Drafts) "." Drafts d OK Lsub completed (0.003 secs). e logout * BYE Logging out e OK Logout completed. closed --------------------------------------- from dovecot.log Sep 19 23:35:13 imap-login: Debug: SSL: where=0x10, ret=1: before/accept initialization [xxx.xxx.xxx.xxx] Sep 19 23:35:13 imap-login: Debug: SSL: where=0x2001, ret=1: before/accept initialization [xxx.xxx.xxx.xxx] Sep 19 23:35:13 imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv2/v3 read client hello A [xxx.xxx.xxx.xxx] Sep 19 23:35:13 auth: Debug: Loading modules from directory: /usr/local/lib/dovecot/auth Sep 19 23:35:13 auth: Debug: Read auth token secret from /var/run/dovecot/auth-token-secret.dat Sep 19 23:35:13 auth: Debug: passwd-file /usr/local/etc/dovecot/users: Read 2 users in 0 secs Sep 19 23:35:13 auth: Debug: auth client connected (pid=1698) Sep 19 23:38:13 imap-login: Info: Disconnected: Inactivity (no auth attempts in 180 secs): user=<>, rip=xxx.xxx.xxx.xxx, lip=xxx.xxx.xxx.xxx, TLS handshaking, session=<MghMJCIgiACsOCYK> -------------------------------- # dovecot -n # 2.2.18: /usr/local/etc/dovecot/dovecot.conf # Pigeonhole version 0.4.8 (0c4ae064f307+) # OS: FreeBSD 10.1-RELEASE-p19 amd64 auth_debug = yes auth_debug_passwords = yes auth_verbose = yes log_path = /var/log/dovecot.log mail_debug = yes mail_gid = 1003 mail_home = /var/mail/vhosts/%d/%n mail_location = maildir:~ mail_privileged_group = vpostfix mail_uid = 1003 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = scheme=CRYPT username_format=%u /usr/local/etc/dovecot/users driver = passwd-file } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { group = postfix mode = 0600 user = postfix } } ssl_cert = </usr/local/etc/ipsec.d/certs/domain.com.crt ssl_key = </usr/local/etc/ipsec.d/private/domain.com.key userdb { args = username_format=%u /usr/local/etc/dovecot/users driver = passwd-file } verbose_ssl = yes # -------------------------- # dovecot --version 2.2.18‎ ‎

2 2

dict lookup from quota plugin
by Bjørnar Ness 23 Sep '15

23 Sep '15

I am having trouble with using a custom daemon listening on a socket together with the quota plugin. My configuration is: quota = dict:User quota::dict:/tmp/dovecot-proxy-dict:: The problem is that dovecot sends keys without usernames, for example: priv/quota/storage Is it possible to get around this limitation without code modification? Also, is it planned to support the "new-style" userdb/passdb lookups from other plugins? -- Bj(/)rnar

2 1

bug - over system quota and dovecot-uidlist
by krzf83＠gmail.com 23 Sep '15

23 Sep '15

Ever since I've migraded from courier pop3 to dovecot pop3 I'm constantly getting complains from users that went over system quota for short while and then their pop3 client downloads all messages again. I never happened with courier pop3. I think that dovecot does not handle dovecot-uidlist file safely so it can withstand such situations. rsync and other similar programs always writes to a copy of the file like dovecot-uidlis.xcb453 and on success unlinks old file and renames new one. Dovecot should not assume that write operation on dovecot-uidlist will succeed. Yes, I know I can put metadata like dovecot-uidlist somewhere else, on another partition but that really splits mailbox into multiple locations making for example backups way harder to make, restore, share etc.

2 1

Dovecot proxy ignores trusted root certificate store
by Alex Bulan 22 Sep '15

22 Sep '15

Dovecot v2.2.18 OS: FreeBSD 10.1/amd64 Dovecot in proxy mode ignores the root certificate store and can't verify the backend's SSL certificate. I've pointed ssl_client_ca_file to my root certificate store, but I suspect ssl_client_ca_file is only used in imapc context. It seems to be ignored in proxy context. doveconf -n ssl_client_ca_file: ssl_client_ca_file = /usr/local/share/certs/ca-root-nss.crt In my password_query I return host set to the backend's IP address, starttls='yes', proxy='y'. The backend's certificate chain is correct and it verifies successfully with "openssl s_client -connect x.x.x.x:110 -starttls pop3 -CAfile /usr/local/share/certs/ca-root-nss.crt". But the Dovecot proxy fails to verify the intermediate certificate it receives from the backend. The inode atime of ca-root-nss.crt is never updated, either at Dovecot start or when it connects to the backend, so Dovecot (via the openssl library) never reads the file. Sep 20 19:59:48 dovecot: pop3-login: Invalid certificate: unable to get local issuer certificate: /C=US/O=GeoTrust Inc./OU=Domain Validated SSL/CN=GeoTrust DV SSL CA - G4 Sep 20 19:59:48 dovecot: pop3-login: Invalid certificate: certificate not trusted: /C=US/O=GeoTrust Inc./OU=Domain Validated SSL/CN=GeoTrust DV SSL CA - G4 Sep 20 19:59:48 dovecot: pop3-login: Error: proxy: Received invalid SSL certificate from x.x.x.x:110: unable to get local issuer certificate: /C=US/O=GeoTrust Inc./OU=Domain Validated SSL/CN=GeoTrust DV SSL CA - G4: user=<xxx>, method=PLAIN, rip=x.x.x.x, lip=x.x.x.x, session=<lz9YjzYgIADYyWAp>

6 13

2.2.18 Regression: Incorrect STATUS response for virtual mailboxes
by Guilhem Moulin 22 Sep '15

22 Sep '15

As shown below, adding a message to TRASH doesn't increase virtual/test's MESSAGES count. However SELECTing virtual/test triggers the increase; so does running `doveadm mailbox status vsize virtual/test` in another shell. $ mkdir -m0700 ~/mail/virtual/test $ echo -e "TRASH\n\tall" > ~/mail/virtual/test/dovecot-virtual $ /usr/lib/dovecot/imap S: * PREAUTH [CAPABILITY IMAP4rev1 … ] Logged in as guilhem C: a STATUS TRASH (MESSAGES UIDNEXT UNSEEN) C: b STATUS virtual/test (MESSAGES UIDNEXT UNSEEN) S: * STATUS TRASH (MESSAGES 5599 UIDNEXT 5619 UNSEEN 0) S: a OK Status completed (0.001 secs). S: * STATUS virtual/test (MESSAGES 5599 UIDNEXT 5600 UNSEEN 0) S: b OK Status completed (0.032 secs). C: c APPEND TRASH {1+} S: x S: c OK [APPENDUID 1442277584 5619] Append completed (0.029 secs). C: d STATUS TRASH (MESSAGES UIDNEXT UNSEEN) C: e STATUS virtual/test (MESSAGES UIDNEXT UNSEEN) S: * STATUS TRASH (MESSAGES 5600 UIDNEXT 5620 UNSEEN 1) S: d OK Status completed (0.000 secs). S: * STATUS virtual/test (MESSAGES 5599 UIDNEXT 5600 UNSEEN 0) S: e OK Status completed (0.000 secs). # it doesn't help to LOGOUT and issue the STATUS command again. However, # it does to execute `doveadm mailbox status vsize virtual/test` in another # shell, or to SELECT virtual/test in the IMAP session. C: f STATUS TRASH (MESSAGES UIDNEXT UNSEEN) C: g STATUS virtual/test (MESSAGES UIDNEXT UNSEEN) S: * STATUS TRASH (MESSAGES 5600 UIDNEXT 5620 UNSEEN 1) S: f OK Status completed (0.000 secs). S: * STATUS virtual/test (MESSAGES 5600 UIDNEXT 5601 UNSEEN 1) S: g OK Status completed (0.000 secs). Cheers, -- Guilhem.

2 1

sieve_extprograms - run any individual script?
by Hajo Locke 22 Sep '15

22 Sep '15

Hello, i use sieve extension sieve_extprograms to send incoming mail to some script. For security reasons it is needed that script-paths etc. are registered in dovecot.conf This is my current dovecot.conf plugin { sieve = ~/.dovecot.sieve sieve_plugins = sieve_extprograms sieve_extensions = +vnd.dovecot.pipe +vnd.dovecot.filter +vnd.dovecot.execute sieve_pipe_bin_dir = /usr/local/bin/ sieve_filter_bin_dir = /usr/local/bin/ } .dovecot.sieve example: if address "to" "test(a)example.com" { filter "myfilter"; } This is all working without problems. Is there a possibility to allow users the execution of individual scripts in own homepath? Some people need to pipe mails to scripts for immediately processing (some ticketsystems need this). Is there a way to make this possible with sieve? Thanks, Hajo

4 4

Multiple passwords for a user (SQL)
by Marco Fretz 22 Sep '15

22 Sep '15

Hi everyone, I'm not sure if this has been discuessed already as I coun't find anything in the archives - maybe I'm looking for the wrong thing. I want to build something similar to googles "app passwords" where your use a different password (strong, auto generated) for each device / app. In general I think this is pretty easy on the database side as I just need a password table and link say the passwords with an user_id to the corresponding user in the users table - one use has many passwords (1:n). for dovecot this means that it will get multiple rows with passwords back from the "password_query". is there a way to tell dovecot to check all those returned passwords and "pass" the request if one of those passwords match? thank you, best regards Marco

2 3

[Dovecot] Pigeonhole sieve re-filter extension?
by T.B. 22 Sep '15

22 Sep '15

Dear Stephan Bosch, dear Dovecot community, "sieve-filter" re-filtering of existing mails is already a great progress for everyone using sieve! But as far as I know this functionality is just accessible by the server administrator. In the meanwhile everyone knows the comfort of re-executing filter scripts on his own existing mailboxes - triggered by himself! This service is already very widespread. Examples are MUA's like Outlook or Thunderbird which provide this service just on the client side. Or almost every web-mail provider offers this. Is there already an managesieve protocol extension that allows client triggered server side re-filtering? If not, maybe you could design a RFC for this? What do you think? Best regards. T.B.

4 8

ssl_key_password loaded from file: 'Couldn't parse private ssl_key'
by B. R. 22 Sep '15

22 Sep '15

As this is my first message to this ML: Hello! I am using a password-protected SSL key for my dovecot MDA. When I tried to use the ssl_key_password configuration directive as follow: ssl_key_password = </path/to/passfile it did not work as I logged the following: dovecot: imap-login: Error: SSL: Stacked error: error:06065064:digital envelope routines:EVP_DecryptFinal_ex:bad decrypt dovecot: imap-login: Fatal: Couldn't parse private ssl_key: error:0906A065:PEM routines:PEM_do_header:bad decrypt However, not using the fille inclusion but directly configuring as follow: ssl_key_password = mypass did work... I am loading my certificate & key with the file inclusion trick... How come cannot I use that for the password file? It would avoid input the password directly into the dovecot configuraiton files, forcing me to change permissions and duplicating it... When renewing the private key I will be force to edit the password at every location. Is it a bug? or a feature? :D --- *B. R.*

3 3