- dovecot - dovecot.org

Re: dovecot quota service for postfix
by Michael Peter 03 Oct '15

03 Oct '15

Hello, Thanks for the clarifications plugin { quota = maildir:User quota quota_rule = *:storage=1G quota_grace = 10%% # 10% is the default quota_status_success = DUNNO quota_status_nouser = DUNNO quota_status_overquota = "552 5.2.2 Mailbox is full" } The above configurations is my default for all users. but my mail system is using mbox format and not maildir.... so what should i change in the above configuration to use mbox INSTEAD of maildir ?? Also for the quota paramater, can i use (myquota = maildir:User quota) INSTEAD of (quota = maildir:User quota) ?? or it must "QUOTA =" and not any thing else to work ? same for quota_rule parameter, should i add (_rule) after quota to work ??? can i add for example qouta_restriction INSTEAD of quota_rules ?? i am asking this question to better understand how dovecot work.. also last question when i use the following command to get quota for existing system user called michael , it gives me an error as follow, so why dovecot is not able to get the quota for the system users? doveadm quota get -u michael doveadm(michael): Fatal: User doesn't exist Many thanks >> Incase user is underquota, then the email is returned back to postfix for >> processing and delivering email to user mbox, incase user has no sufficient quota then dovecot will inform postfix to reject email. Please confirm if what i mentioned above is correct and that i >> understand >> correctly how dove-cot policy works with postfix. > Your understanding is mor or less correct, except that postfix never passes the email itself to dovecot when performing the quota check. It simply sends a message to the quota policy service asking if the recipient is over quota. If the recipient is over quota, dovecot provides postfix with the response configured in quota_status_overquota. If the recipient is under quota, dovecot provides postfix with the response configured in quota_status_success. If dovecot does not know the user, it provides postfix with the response configured in > quota_status_nouser. >> Kindly check my configuration below and advise the missing parts to add... > I don't see anything wrong with your configuration on first appraisal, but if it isn't working I would recommend you perform the following troubleshooting steps. > 1. Verify the user's mailbox is over or under quota in alignment with your expectations > - `doveadm quota -u $RECIPIENT` > 2. Test that the quota service provides the response you expect it to > - `echo "recipient=$RECIPIENT" | nc -q1 localhost 12340` > On 09/26/2015 01:40 AM, Michael Peter wrote: >> Hello, >> I am trying to use dovecot quota service for postfix in order set quota for some users. >> i configure postfix policy service to ask dovecot if user quota is sufficient to accept the email or not. >> (dovecot in this case acts only as policy server to postfix as it only ACCEPT/REJECT email according to user quota, but it is not used to deliver >> email , because postfix will deliver the email to user mailbox) Incase user is underquota, then the email is returned back to postfix for >> processing and delivering email to user mbox, incase user has no sufficient quota then dovecot will inform postfix to reject email. Please confirm if what i mentioned above is correct and that i >> understand >> correctly how dove-cot policy works with postfix. >> Kindly check my configuration below and advise the missing parts to add... >> plugin { >> quota_rule = *:storage=1G >> quota_grace = 10%% >> # 10% is the default >> quota_status_success = DUNNO >> quota_status_nouser = DUNNO >> quota_status_overquota = "552 5.2.2 Mailbox is full" >> ... >> } >> The above configurations is for all users which is not override by quota >> rules in userdb's extra fields in my password file below. >> Is the above configuration missing some thing ? i am using mbox format for >> emails storage. do you i have to add (quota= SOMETHING) before >> (quote_rule >> = *:storage=1G) and what to do add to make dovecot support mbox quota? smtpd_recipient_restrictions = >> check_policy_service inet:SERVER-HIDDEN-FOR-SECRUITY.com:12340 >> service quota-status { >> executable = quota-status -p postfix >> inet_listener { >> port = 12340 >> } >> client_limit = 1 >> } >> now in order to configure dovecot specific quota for user named (user1) i >> use passwd-file as follow >> user1:{plain}pass3:1002:1002::/home/user1::userdb_mail=mbox:~/mymail:INBOX=/var/mail/user1 userdb_quota_rule=*:bytes=300M >> All other users except users1 should have 1GB storage according to this configuration. which user1 will only have 300MB >> Please advise what is my configuration is missing and if i need to add any >> thing to run without issues. >> Many thanks >> Michael Peter

1 0

imap_logout_format improvements / ideas
by Timo Sirainen 03 Oct '15

03 Oct '15

http://hg.dovecot.org/dovecot-2.2/rev/93bba97afb2a http://hg.dovecot.org/dovecot-2.2/rev/e0a17714f0c9 So all in all, you can now add to imap_logout_format: # %i - total number of bytes read from client # %o - total number of bytes sent to client # %{fetch_hdr_count} - Number of mails with mail header data sent to client # %{fetch_hdr_bytes} - Number of bytes with mail header data sent to client # %{fetch_body_count} - Number of mails with mail body data sent to client # %{fetch_body_bytes} - Number of bytes with mail body data sent to client # %{deleted} - Number of mails where client added \Deleted flag # %{expunged} - Number of mails that client expunged # %{trashed} - Number of mails that client copied/moved to the # special_use=\Trash mailbox. Any thoughts on what else would be useful? I was also thinking about separating (deletes and) expunges from Trash vs non-Trash, but I'm not sure how useful that would be (and what would it be called?) It's also a bit annoying that a copy+expunge to a Trash will return expunged=1 trashed=1, but a move to Trash (via IMAP MOVE) will return expunged=0 trashed=1. But trying to fix that would be too much trouble.

4 4

doveadm + ldap userdb
by Pavel Batkov 01 Oct '15

01 Oct '15

Hi! OS: CentOS Linux release 7.1.1503 (Core) Dovecot: 2.2.18 Run user listing - doveadm user '*', single user - work. auth[20540]: segfault at 8 ip 00007fd554340c6b sp 00007ffc17c886e0 error 4 in libauthdb_ldap.so[7fd55433b000+a000] dovecot: auth: Fatal: master: service(auth): child 20540 killed with signal 11 (core dumped) dovecot: auth: Error: net_connect_unix(auth-worker) failed: No such file or directory Backtrace: { "signal": 11 , "executable": "/usr/libexec/dovecot/auth" , "stacktrace": [ { "crash_thread": true , "frames": [ { "address": 139954408369259 , "build_id": "62d54c5834c6675c5ec229927d4c087a3277c1d2" , "build_id_offset": 23659 , "function_name": "ldap_input" , "file_name": "/usr/lib64/dovecot/auth/libauthdb_ldap.so" } , { "address": 139954486291015 , "build_id": "9ab58d2125033b7eef9f04560a7d7d28737585ce" , "build_id_offset": 502343 , "function_name": "io_loop_call_io" , "file_name": "/usr/lib64/dovecot/libdovecot.so.0" } , { "address": 139954486294735 , "build_id": "9ab58d2125033b7eef9f04560a7d7d28737585ce" , "build_id_offset": 506063 , "function_name": "io_loop_handler_run" , "file_name": "/usr/lib64/dovecot/libdovecot.so.0" } , { "address": 139954486289816 , "build_id": "9ab58d2125033b7eef9f04560a7d7d28737585ce" , "build_id_offset": 501144 , "function_name": "io_loop_run" , "file_name": "/usr/lib64/dovecot/libdovecot.so.0" } , { "address": 139954485950947 , "build_id": "9ab58d2125033b7eef9f04560a7d7d28737585ce" , "build_id_offset": 162275 , "function_name": "master_service_run" , "file_name": "/usr/lib64/dovecot/libdovecot.so.0" } , { "address": 139954491066353 , "build_id": "9e3bf53b9c2ecb0bec470c65ace47166336e650f" , "build_id_offset": 59377 , "function_name": "main" , "file_name": "/usr/libexec/dovecot/auth" } ] } ] } From gdb: Core was generated by `dovecot/auth'. Program terminated with signal 11, Segmentation fault. #0 0x00007f49accbac6b in ldap_input () from /usr/lib64/dovecot/auth/libauthdb_ldap.so (gdb) bt full #0 0x00007f49accbac6b in ldap_input () from /usr/lib64/dovecot/auth/libauthdb_ldap.so No symbol table info available. #1 0x00007f49b170aa47 in io_loop_call_io () from /usr/lib64/dovecot/libdovecot.so.0 No symbol table info available. #2 0x00007f49b170b8cf in io_loop_handler_run () from /usr/lib64/dovecot/libdovecot.so.0 No symbol table info available. #3 0x00007f49b170a598 in io_loop_run () from /usr/lib64/dovecot/libdovecot.so.0 No symbol table info available. #4 0x00007f49b16b79e3 in master_service_run () from /usr/lib64/dovecot/libdovecot.so.0 No symbol table info available. #5 0x00007f49b1b987f1 in main () No symbol table info available.

2 1

/usr/lib/dovecot/imap exits with an error if stderr closed
by Josh Triplett 01 Oct '15

01 Oct '15

At the end of a direct IMAP conversation with the imap binary, it writes an informative message like "imap(josh): Info: Connection closed in=0 out=365" to stderr. With stderr closed, the imap binary will exit with exit code 81 after it gets EBADF from that write. While it makes sense to fail on failure to write an error message, I don't think it makes sense to fail if writing an info message fails. I encountered this when using /usr/lib/dovecot/imap with mutt's "tunnel" option. Mutt seems to run the configured tunnel program with stderr closed, which triggers this error. - Josh Triplett

1 0

[IMAP] Nothing in INBOX
by Yvon Thoraval 01 Oct '15

01 Oct '15

Hey all, I've just installed Postfix + Dovecot on Xubunto 14.04 LTS. Following this page : Setup a mail server with Postfix and Dovecot on Ubuntu / Debian <http://www.binarytides.com/install-postfix-dovecot-debian/> although I'm able to send emails to GMail and other kind of domain, nothing appears on Thunderbird INBOX, nor using openssl : ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- $ openssl s_client -connect imap.<DOMAIN>.<TLD>:993 CONNECTED(00000003) <snip /> Start Time: 1443543797 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN AUTH=LOGIN] Dovecot (Ubuntu) ready. A1 LOGIN <USER>@<DOMAIN>.<TLD> <PASSWORD 4 USER> A1 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE BINARY MOVE] Logged in A2 LIST "" "*" * LIST (\HasNoChildren) "." GMail * LIST (\HasNoChildren \Drafts) "." Drafts * LIST (\HasNoChildren) "." j-kiosk * LIST (\HasNoChildren \Trash) "." Trash * LIST (\HasNoChildren) "." Pourriel * LIST (\HasNoChildren) "." "Linux Mint" * LIST (\HasNoChildren) "." free * LIST (\HasNoChildren \Sent) "." Sent * LIST (\HasNoChildren) "." INBOX A2 OK List completed. A3 EXAMINE INBOX * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS ()] Read-only mailbox. * 0 EXISTS * 0 RECENT * OK [UIDVALIDITY 1443454274] UIDs valid * OK [UIDNEXT 1] Predicted next UID * OK [NOMODSEQ] No permanent modsequences A3 OK [READ-ONLY] Examine completed (0.000 secs). ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- However, using mail, i can read the emails : ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- $ mail Heirloom mailx version 12.5 6/20/10. Type ? for help. "/var/mail/desktop": 20 messages 9 new 18 unread U 1 Desktop User Sun Sep 27 13:01 19/621 ceci est le sujet <snip /> N 20 Yvon Thoraval Tue Sep 29 18:02 25/1042 another mail with Maildir... ? ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- my dovecot setup uses vhosts : ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- $ ls -al /var/mail/vhosts/<DOMAIN>/<USER>/ total 76K drwxr-sr-x 14 vmail vmail 4,0K sept. 29 18:01 ./ drwxr-sr-x 4 vmail vmail 4,0K sept. 27 10:31 ../ drwxr-sr-x 2 vmail vmail 4,0K sept. 28 17:31 cur/ -rw-r--r-- 1 vmail vmail 272 sept. 28 17:31 dovecot.index.log -rw-r--r-- 1 vmail vmail 168 sept. 29 16:16 dovecot.mailbox.log -rw-r--r-- 1 vmail vmail 51 sept. 28 17:31 dovecot-uidlist -rw-r--r-- 1 vmail vmail 8 sept. 29 16:17 dovecot-uidvalidity -r--r--r-- 1 vmail vmail 0 sept. 28 17:31 dovecot-uidvalidity.56095d49 drwxr-sr-x 5 vmail vmail 4,0K sept. 29 15:09 .Drafts/ drwxr-sr-x 5 vmail vmail 4,0K sept. 28 18:40 .free/ drwxr-sr-x 5 vmail vmail 4,0K sept. 28 18:41 .GMail/ drwxr-sr-x 5 vmail vmail 4,0K sept. 29 16:17 .j-kiosk/ drwxr-sr-x 5 vmail vmail 4,0K sept. 29 16:17 .Linux Mint/ drwxr-sr-x 2 vmail vmail 4,0K sept. 29 18:01 Maildir/ -rw-r--r-- 1 vmail vmail 0 sept. 28 17:31 maildirfolder drwxr-sr-x 2 vmail vmail 4,0K sept. 28 17:31 new/ drwxr-sr-x 5 vmail vmail 4,0K sept. 29 15:08 .Pourriel/ drwxr-sr-x 5 vmail vmail 4,0K sept. 29 16:17 .Sent/ -rw-r--r-- 1 vmail vmail 48 sept. 29 16:16 subscriptions drwxr-sr-x 2 vmail vmail 4,0K sept. 28 17:31 tmp/ drwxr-sr-x 5 vmail vmail 4,0K sept. 29 15:06 .Trash/ ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- with nothing in new subfolder: ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- $ ls -al /var/mail/vhosts/<DOMAIN>/<USER>/new total 8,0K drwxr-sr-x 2 vmail vmail 4,0K sept. 28 17:31 ./ drwxr-sr-x 14 vmail vmail 4,0K sept. 29 18:01 ../ ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- my Postfix version : ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- $ postconf -d | grep mail_version mail_version = 2.11.0 ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- my Dovecot version : ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- $ dovecot --version 2.2.9 ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- my Dovecot conf : ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- $ sudo dovecot -n # 2.2.9: /etc/dovecot/dovecot.conf # OS: Linux 3.14.32-xxxx-std-ipv6-64 x86_64 Ubuntu 14.04.3 LTS ext4 auth_mechanisms = plain login listen = * log_path = /var/log/dovecot.log mail_location = maildir:/var/mail/vhosts/%d/%n namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } passdb { args = scheme=PLAIN username_format=%u /etc/dovecot/dovecot-users driver = passwd-file } postmaster_address = desktop(a)j-kiosk.com protocols = " imap lmtp pop3" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } } service imap-login { inet_listener imaps { port = 993 ssl = yes } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service pop3-login { inet_listener pop3s { port = 995 ssl = yes } } ssl = required ssl_cert = </etc/dovecot/dovecot.pem ssl_key = </etc/dovecot/private/dovecot.pem userdb { driver = passwd } userdb { args = uid=vmail gid=vmail home=/var/mail/vhosts/%d/%n driver = static } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep } ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- my Postfix conf: ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- $ postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all inet_protocols = all mailbox_size_limit = 51200000 mydestination = $myhostname, $mydomain, localhost.$mydomain, localhost mydomain = <DOMAIN>.<TLD> myhostname = smtp.<DOMAIN>.<TLD> mynetworks = <DOMAIN IP>.0/24, 127.0.0.0/8 myorigin =<DOMAIN>.<TLD> readme_directory = no recipient_delimiter = relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes virtual_mailbox_domains = /etc/postfix/virtual_mailbox_domains virtual_transport = lmtp:unix:private/dovecot-lmtp ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

3 3

Dovecot 1.0.10 - Authenticate against LDAP with multiple sub-trees
by Daniel Heitepriem 01 Oct '15

01 Oct '15

Hi guys, I'm using Dovecot 1.0.10 with LDAP authentication. Below is my dovecot-ldap.conf { hosts = *IP of LDAP server* auth_bind = yes auth_bind_userdn = uid=%u,ou=people,dc=*something*,dc=com ldap_version = 3 base = %u,ou=people,dc=*something*,dc=com deref = never scope = subtree user_filter = (&(objectClass=person)(uid=%u)) } And the current structure: Base | |-- people | | *user entries* | Now I want to update to a LDAP server with the following structure: Base | |-- people | |-- staff | | *user entries* |-- other location | | *user entries* | How can I keep my "auth_bind_userdn" using this new structure? Hopefully somebody can help me :) Regards, Daniel

1 0

Does fts_lucene need fts_squat?
by Marcin Mirosław 01 Oct '15

01 Oct '15

Hi ML! Please look at this: - I've got no lucene-index: > # ls /dane/domeny/mejor.pl/mail/marcin/.maildir/lucene-indexes > ls: cannot access /dane/domeny/mejor.pl/mail/marcin/.maildir/lucene-indexes: No such file or directory - run search in body: > echo -e "a select bugzilla\na search body flto\na logout\n" | /usr/libexec/dovecot/imap -u marcin(a)mejor.pl > * PREAUTH [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS BINARY MOVE SEARCH=FUZZY NOTIFY SPECIAL-USE COMPRESS=DEFLATE QUOTA] Logged in as marcin(a)mejor.pl > * FLAGS (\Answered \Flagged \Deleted \Seen \Draft NonJunk Old $label1 $label2 $label3 $label4 $label5 ae_autoextract) > * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft NonJunk Old $label1 $label2 $label3 $label4 $label5 ae_autoextract \*)] Flags permitted. > * 5311 EXISTS > * 0 RECENT > * OK [UNSEEN 4910] First unseen. > * OK [UIDVALIDITY 1246465819] UIDs valid > * OK [UIDNEXT 17871] Predicted next UID > * OK [HIGHESTMODSEQ 16914] Highest > a OK [READ-WRITE] Select completed (0.005 secs). > * SEARCH 366 380 2132 2515 2548 2551 2566 2567 2589 2612 2615 2617 3678 3696 4538 > a OK Search completed (2.768 secs). > * BYE Logging out > a OK Logout completed. > imap(marcin(a)mejor.pl) <>: Info: Disconnected: Logged out in=45 out=1084 - still doesn't have lucene indexes: > # ls /dane/domeny/mejor.pl/mail/marcin/.maildir/lucene-indexes > ls: cannot access /dane/domeny/mejor.pl/mail/marcin/.maildir/lucene-indexes: No such file or directory # doveadm index -A "*" # ls /dane/domeny/mejor.pl/mail/marcin/.maildir/lucene-indexes ls: cannot access /dane/domeny/mejor.pl/mail/marcin/.maildir/lucene-indexes: No such file or directory Now I'm changin 10-mail.conf: -mail_plugins = fts fts_lucene quota notify mail_log stats zlib +mail_plugins = fts fts_squat fts_lucene quota notify mail_log stats zlib Reloading dovecot and: - # doveadm index -A "*" - # ls /dane/domeny/mejor.pl/mail/marcin/.maildir/lucene-indexes _0.cfs segments_3 segments.gen Now something appears. But search returns no hit: > # echo -e "a select bugzilla\na search body flto\na logout\n" | /usr/libexec/dovecot/imap -u marcin(a)mejor.pl > * PREAUTH [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS BINARY MOVE SEARCH=FUZZY NOTIFY SPECIAL-USE COMPRESS=DEFLATE QUOTA] Logged in as marcin(a)mejor.pl > * FLAGS (\Answered \Flagged \Deleted \Seen \Draft NonJunk Old $label1 $label2 $label3 $label4 $label5 ae_autoextract) > * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft NonJunk Old $label1 $label2 $label3 $label4 $label5 ae_autoextract \*)] Flags permitted. > * 5311 EXISTS > * 0 RECENT > * OK [UNSEEN 4910] First unseen. > * OK [UIDVALIDITY 1246465819] UIDs valid > * OK [UIDNEXT 17871] Predicted next UID > * OK [HIGHESTMODSEQ 16914] Highest > a OK [READ-WRITE] Select completed (0.008 secs). > * SEARCH > a OK Search completed (0.004 secs). > * BYE Logging out > a OK Logout completed. > imap(marcin(a)mejor.pl) <>: Info: Disconnected: Logged out in=45 out=1011 Also probably I mess something in index files. I've added fts_lucene earlier, then removed /lucene-indexes dir. Tried to do doveadm index, (does doeveadm fts rescan/optimize work? I didn't notice that mentioned commands do something with fts indexes (both squat and lucene). Marcin > # 2.2.18: /etc/dovecot/dovecot.conf > # Pigeonhole version 0.4.8 (0c4ae064f307+) > # OS: Linux 4.1.6-hardened x86_64 Gentoo Base System release 2.2 > auth_cache_size = 1 k > auth_master_user_separator = * > auth_mechanisms = login digest-md5 cram-md5 plain > deliver_log_format = msgid=%m: from=%f: phys=%p: virt=%w %$ > dict { > quota = pgsql:/etc/dovecot/dovecot-dict-sql.conf.ext > } > first_valid_uid = 8 > last_valid_uid = 8 > lda_mailbox_autocreate = yes > lda_mailbox_autosubscribe = yes > mail_attachment_dir = /dane/domeny/zalaczniki > mail_attachment_min_size = 10000 k > mail_cache_min_mail_count = 20 > mail_gid = mail > mail_log_prefix = "%s(%u) <%{session}>: " > mail_plugins = fts fts_squat fts_lucene quota notify mail_log stats zlib > mail_prefetch_count = 20 > mail_privileged_group = mail > mail_uid = mail > mailbox_list_index = yes > maildir_stat_dirs = yes > managesieve_notify_capability = mailto > managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include vari > ables body enotify environment mailbox date index ihave duplicate > mdbox_preallocate_space = yes > mdbox_rotate_interval = 60 days > mdbox_rotate_size = 50 M > namespace inbox { > inbox = yes > list = yes > location = > mailbox Drafts { > auto = subscribe > special_use = \Drafts > } > mailbox Junk { > auto = subscribe > special_use = \Junk > } > mailbox Sent { > auto = subscribe > special_use = \Sent > } > mailbox "Sent Messages" { > special_use = \Sent > } > mailbox Trash { > auto = subscribe > special_use = \Trash > } > prefix = > separator = . > subscriptions = yes > } > passdb { > args = /etc/dovecot/.master.user > driver = passwd-file > master = yes > pass = yes > } > passdb { > args = /etc/dovecot/dovecot-sql.conf.ext > driver = sql > } > plugin { > fts = lucene > fts_lucene = whitespace_chars=@. > fts_squat = partial=4 full=10 > quota = dict:User quota::proxy::quota > sieve = file:~/sieve;active=~/.dovecot.sieve > stats_command_min_time = 1 mins > stats_domain_min_time = 12 hours > stats_ip_min_time = 12 hours > stats_memory_limit = 10k > stats_refresh = 30 s > stats_session_min_time = 15 mins > stats_track_cmds = yes > stats_user_min_time = 1 hours > zlib_save = bz2 > zlib_save_level = 2 > } > postmaster_address = postmaster(a)mejor.pl > protocols = imap pop3 sieve > service auth { > unix_listener auth-userdb { > group = mail > mode = 0660 > user = root > } > } > service dict { > unix_listener dict { > user = mail > } > } > service stats { > fifo_listener stats-mail { > mode = 0600 > user = mail > } > } > ssl_cert = </etc/ssl/private/gwiazdka.mejor.pl.pem > ssl_key = </etc/ssl/private/gwiazdka.mejor.pl.pem > userdb { > driver = prefetch > } > userdb { > args = /etc/dovecot/dovecot-sql.conf.ext > driver = sql > } > verbose_proctitle = yes > protocol lda { > mail_plugins = fts fts_squat fts_lucene quota notify mail_log stats zlib sieve > } > protocol imap { > mail_max_userip_connections = 20 > mail_plugins = fts fts_squat fts_lucene quota notify mail_log stats zlib imap_quota imap_stats imap_zlib > }

1 0

SiS and attachments filename
by Angel L. Mateo 01 Oct '15

01 Oct '15

Hi, I've been working with dovecot SiS for a long time without any problem. This is my configuration for SiS: mail_attachment_dir = /mail/users/attachments mail_attachment_fs = sis posix mail_attachment_hash = %{sha1} mail_attachment_min_size = 128 k With this configuration, I have, for example: # ls -l /mail/users/attachments/27/d1/27d1904ac9947945bf48ea545ec278940d840ed1* -rw------- 12 vmail vmail 142914 may 6 2013 /mail/users/attachments/27/d1/27d1904ac9947945bf48ea545ec278940d840ed1-090d88269ad28851f14b0000a9061514 ... And every file is a hard link to /mail/users/attachments/27/d1/hashes/27d1904ac9947945bf48ea545ec278940d840ed1 For the documentation I have found, "27d1904ac9947945bf48ea545ec278940d840ed1" is a hash of the attach content, but what does the other part of the filename (the "090d88269ad28851f14b0000a9061514" means) My question has come to my mind because I need an easy way to find the mailbox where this attach is referenced from. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868887590 Fax: 868888337

1 0

Re: [IMAP] Nothing in INBOX
by Joseph Tam 30 Sep '15

30 Sep '15

Yvon Thoraval writes: > although I'm able to send emails to GMail and other kind of domain, nothing > appears on Thunderbird INBOX, nor using openssl : I haven't combed through your diagnostic, but two things junp out at me. Your "mail" output states > "/var/mail/desktop": 20 messages 9 new 18 unread indicating that the INBOX is held in /var/mail/desktop, whereas your dovecot configuration states > mail_location = maildir:/var/mail/vhosts/%d/%n So there seems to be a disagreement as to where the INBOX is located. Maybe you need to set the INBOX parameter directly. http://wiki2.dovecot.org/MailLocation Joseph Tam <jtam.home(a)gmail.com>

1 0

Re: Newbie why is dovecot classified diff then sendmail or courier
by David Niklas 30 Sep '15

30 Sep '15

Enlightenment succeeded! Thanks, David

1 0