- dovecot - dovecot.org

Cant See Sent Mailbox despite GETACL [request for help]
by Kevin Laurie 21 Apr '15

21 Apr '15

Hi, Apparently the "Sent" mailbox cannot be viewed by Dave(the user). Any idea why? When I do GETACL for Sent, the message I get is shown below:- * ACL "Sent" "dave(a)mydomain.net" ilr "help(a)mydomain.net" lrwstipekxacd

2 1

cant see all users - need to create symlink between mailboxes [request for help]
by Kevin Laurie 21 Apr '15

21 Apr '15

Hi, I need to create a symlink to share mailboxes. I tried to check at : cd /var/mail/ but I cant see all the mailboxes. Could someone advise how to do this? I am trying to achieve as showing in tutorial here:- http://wiki.dovecot.org/SharedMailboxes/Symlinks Below is the details of my dovecot.conf Appreciate if anyone can help. # Listen addresses. # - '*' means all available IPv4 addresses. # - '[::]' means all available IPv6 addresses. # Listen on all available addresses by default listen = * [::] #base_dir = /var/run/dovecot mail_plugins = quota acl # Enable fts fts_solr plugin globally for Solr Full Text Search Indexing mail_plugins = $mail_plugins fts fts_solr plugin { fts = solr #break-imap-search will use solr for indexing TEXT and BODY searches. fts_solr = break-imap-search url=http://127.0.0.1:8983/solr/ fts_autoindex = yes } # Enabled mail protocols. protocols = pop3 imap sieve lmtp # User/group who owns the message files: mail_uid = 2000 mail_gid = 2000 # Assign uid to virtual users. first_valid_uid = 2000 last_valid_uid = 2000 # Logging. Reference: http://wiki2.dovecot.org/Logging log_path = /var/log/dovecot.log mail_debug = no auth_verbose = no auth_debug = no auth_debug_passwords = no # Possible values: no, plain, sha1. auth_verbose_passwords = no # SSL: Global settings. # Refer to wiki site for per protocol, ip, server name SSL settings: # http://wiki2.dovecot.org/SSL/DovecotConfiguration ssl_protocols = !SSLv2 !SSLv3 ssl = required verbose_ssl = no #ssl_ca =</path/to/ca ssl_cert = </etc/pki/tls/certs/iRedMail.crt ssl_key = </etc/pki/tls/private/iRedMail.key # With disable_plaintext_auth=yes AND ssl=required, STARTTLS is mandatory. # Set disable_plaintext_auth=no AND ssl=yes to allow plain password transmitted # insecurely. disable_plaintext_auth = yes # Allow plain text password per IP address/net #remote 192.168.0.0/24 { # disable_plaintext_auth = no #} # Mail location and mailbox format. mail_location = maildir:/%Lh/Maildir/:INDEX=/%Lh/Maildir/ # Authentication related settings. # Append this domain name if client gives empty realm. auth_default_realm = # Authentication mechanisms. auth_mechanisms = PLAIN LOGIN # Limits the number of users that can be logging in at the same time. # Default is 100. # Note: this value can be overrided by "process_limit =" in service protocol. # e.g. # protocol imap-login { # ... # process_limit = 500 # } #default_process_limit = 100 service auth { unix_listener /var/spool/postfix/private/dovecot-auth { user = postfix group = postfix mode = 0666 } unix_listener auth-master { user = vmail group = vmail mode = 0666 } unix_listener auth-userdb { user = vmail group = vmail mode = 0660 } } # LMTP server (Local Mail Transfer Protocol). # Reference: http://wiki2.dovecot.org/LMTP service lmtp { user = vmail # For higher volume sites, it may be desirable to increase the number of # active listener processes. A range of 5 to 20 is probably good for most # sites. process_min_avail = 5 # Logging. # Require 'info_log_path =' in 'protocol lmtp {}' block. executable = lmtp -L # Listening on socket file and TCP unix_listener /var/spool/postfix/private/dovecot-lmtp { user = postfix group = postfix mode = 0600 } inet_listener lmtp { #address = 192.168.0.24 127.0.0.1 ::1 port = 24 } } # Virtual mail accounts. userdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } passdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } # Master user. # Master users are able to log in as other users. It's also possible to # directly log in as any user using a master password, although this isn't # recommended. # Reference: http://wiki2.dovecot.org/Authentication/MasterUsers auth_master_user_separator = * passdb { driver = passwd-file args = /etc/dovecot/dovecot-master-users master = yes } plugin { auth_socket_path = /var/run/dovecot/auth-master quota = dict:user::proxy::quotadict quota_rule = *:storage=1G #quota_rule2 = *:messages=0 #quota_rule3 = Trash:storage=1G #quota_rule4 = Junk:ignore # Quota warning. # If user suddenly receives a huge mail and the quota jumps from # 85% to 95%, only the 95% script is executed. quota_warning = storage=85%% quota-warning 85 %u quota_warning2 = storage=90%% quota-warning 90 %u quota_warning3 = storage=95%% quota-warning 95 %u # Plugin: autocreate. Create and subscribe to default IMAP folders. autocreate = INBOX autocreate2 = Sent autocreate3 = Trash autocreate4 = Drafts autocreate5 = Junk autosubscribe = INBOX autosubscribe2 = Sent autosubscribe3 = Trash autosubscribe4 = Drafts autosubscribe5 = Junk # Plugin: expire. #expire = Trash 7 Trash/* 7 Junk 30 #expire_dict = proxy::expire # ACL and share folder acl = vfile acl_shared_dict = proxy::acl # By default Dovecot doesn't allow using the IMAP "anyone" or # "authenticated" identifier, because it would be an easy way to spam # other users in the system. If you wish to allow it, #acl_anyone = allow # Pigeonhole managesieve service. # Reference: http://wiki2.dovecot.org/Pigeonhole/Sieve/Configuration # Per-user sieve settings. sieve_dir = /%Lh/sieve sieve = /%Lh/sieve/dovecot.sieve # Global sieve settings. sieve_global_dir = /var/vmail/sieve # Note: if user has personal sieve script, global sieve rules defined in # sieve_default will be ignored. Please use sieve_before or # sieve_after instead. #sieve_default = sieve_before = /var/vmail/sieve/dovecot.sieve #sieve_after = # The maximum number of redirect actions that can be performed during a # single script execution. The meaning of 0 differs based on your version. # For versions v0.3.0 and beyond this means that redirect is prohibited. # For older versions, however, this means that the number of redirects is # unlimited, so be careful. #sieve_max_redirects = 4 } service quota-warning { executable = script /usr/local/bin/dovecot-quota-warning.sh unix_listener quota-warning { user = vmail group = vmail mode = 0660 } } service dict { unix_listener dict { mode = 0660 user = vmail group = vmail } } dict { #expire = db:/var/lib/dovecot/expire/expire.db quotadict = mysql:/etc/dovecot/dovecot-used-quota.conf acl = mysql:/etc/dovecot/dovecot-share-folder.conf } protocol lda { # Reference: http://wiki2.dovecot.org/LDA mail_plugins = $mail_plugins sieve autocreate auth_socket_path = /var/run/dovecot/auth-master log_path = /var/log/dovecot-sieve.log lda_mailbox_autocreate = yes postmaster_address = root } protocol lmtp { # Log file info_log_path = /var/log/dovecot-lmtp.log # Plugins mail_plugins = quota # Enable fts fts_solr plugin globally for Solr Full Text Search Indexing mail_plugins = $mail_plugins fts fts_solr plugin { fts = solr #break-imap-search will use solr for indexing TEXT and BODY searches. fts_solr = break-imap-search url=http://127.0.0.1:8983/solr/ fts_autoindex = yes } postmaster_address = postmaster lmtp_save_to_detail_mailbox = yes recipient_delimiter = + } protocol imap { mail_plugins = $mail_plugins imap_quota autocreate imap_acl imap_client_workarounds = tb-extra-mailbox-sep # Maximum number of IMAP connections allowed for a user from each IP address. # NOTE: The username is compared case-sensitively. # Default is 10. # Increase it to avoid issue like below: # "Maximum number of concurrent IMAP connections exceeded" mail_max_userip_connections = 20 } protocol pop3 { mail_plugins = $mail_plugins pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv # Maximum number of IMAP connections allowed for a user from each IP address. # NOTE: The username is compared case-sensitively. # Default is 10. mail_max_userip_connections = 20 } # Login processes. Refer to Dovecot wiki for more details: # http://wiki2.dovecot.org/LoginProcess service imap-login { service_count = 1 # To avoid startup latency for new client connections, set process_min_avail # to higher than zero. That many idling processes are always kept around # waiting for new connections. #process_min_avail = 0 # number of simultaneous IMAP connections #process_limit = $default_process_limit process_limit = 500 # vsz_limit should be fine at its default 64MB value #vsz_limit = 64M } service pop3-login { service_count = 1 # number of simultaneous POP3 connections #process_limit = 500 } namespace { type = private separator = / prefix = #location defaults to mail_location. inbox = yes } namespace { type = shared separator = / prefix = Shared/%%u/ location = maildir:/%%Lh/Maildir/:INDEX=/%%Lh/Maildir/Shared/%%u # this namespace should handle its own subscriptions or not. subscriptions = yes list = children } # Public mailboxes. # Refer to Dovecot wiki page for more details: # http://wiki2.dovecot.org/SharedMailboxes/Public #namespace { # type = public # separator = / # prefix = Public/ # # # CONTROL=: Mark this public folder as read-only mailbox # # INDEX=: Per-user \Seen flag # location = maildir:/var/vmail/public/:CONTROL=~/Maildir/public:INDEX=~/Maildir/public # # # Allow users to subscribe to the public folders. # subscriptions = yes #}

2 2

userdb username changed
by Péter Márton 20 Apr '15

20 Apr '15

Hi! I'm playing with a postfix + dovecot + mysql test setup, and noticed something strange. It seems that despite the "username changed" line, auth returns the original username: Apr 17 09:27:34 imap21 dovecot: quota-status: Debug: Loading modules from directory: /usr/lib64/dovecot (...) Apr 17 09:27:34 imap21 dovecot: auth-worker(27661): Debug: sql(ppp(a)example.net): SELECT at.userid AS user, at.home AS home, at.uid AS uid, at.gid AS gid, concat('*:storage=', at.quotabytes, 'b:messages=', at.quotamessages) AS quota_rule FROM auth at INNER JOIN mailaddr mt ON at.userid = mt.userid WHERE mt.mailaddress = 'ppp(a)example.net' OR at.userid = 'ppp(a)example.net' Apr 17 09:27:34 imap21 dovecot: auth-worker(27661): Debug: sql(ppp(a)example.net): username changed ppp(a)example.net -> uppp Apr 17 09:27:34 imap21 dovecot: auth: Debug: userdb out: USER#0111#011ppp@example.net#011home=/home/ppp#011uid=500#011gid=500#011quota_rule=*:storage=3100b:messages=1024 Apr 17 09:27:34 imap21 dovecot: quota-status: Debug: auth input: ppp(a)example.net home=/home/ppp uid=500 gid=500 quota_rule=*:storage=3100b:messages=1024 Apr 17 09:27:34 imap21 dovecot: quota-status: Debug: Added userdb setting: plugin/quota_rule=*:storage=3100b:messages=1024 Apr 17 09:27:34 imap21 dovecot: quota-status(ppp(a)example.net): Debug: Effective uid=500, gid=500, home=/home/ppp Apr 17 09:27:34 imap21 dovecot: quota-status(ppp(a)example.net): Debug: Quota root: name=User quota backend=dict args=:proxy::quota Apr 17 09:27:34 imap21 dovecot: quota-status(ppp(a)example.net): Debug: Quota rule: root=User quota mailbox=* bytes=3100 messages=1024 Apr 17 09:27:34 imap21 dovecot: quota-status(ppp(a)example.net): Debug: Quota grace: root=User quota bytes=310 (10%) Apr 17 09:27:34 imap21 dovecot: quota-status(ppp(a)example.net): Debug: dict quota: user=ppp(a)example.net, uri=proxy::quota, noenforcing=0 I've checked this with the LMTP service (i know, normally it wouldn't get mail addresses) and it produces the same: Apr 17 09:30:35 imap21 dovecot: auth-worker(27730): Debug: sql(ppp(a)example.net,127.0.0.1): SELECT at.userid AS user, at.home AS home, at.uid AS uid, at.gid AS gid, concat('*:storage=', at.quotabytes, 'b:messages=', at.quotamessages) AS quota_rule FROM auth at INNER JOIN mailaddr mt ON at.userid = mt.userid WHERE mt.mailaddress = 'ppp(a)example.net' OR at.userid = 'ppp(a)example.net' Apr 17 09:30:35 imap21 dovecot: auth-worker(27730): Debug: sql(ppp(a)example.net,127.0.0.1): username changed ppp(a)example.net -> uppp Apr 17 09:30:35 imap21 dovecot: auth: Debug: userdb out: USER#0111#011ppp@example.net#011home=/home/ppp#011uid=500#011gid=500#011quota_rule=*:storage=3100b:messages=1024 Apr 17 09:30:35 imap21 dovecot: lmtp(27728): Debug: auth input: ppp(a)example.net home=/home/ppp uid=500 gid=500 quota_rule=*:storage=3100b:messages=1024 Apr 17 09:30:35 imap21 dovecot: lmtp(27728): Debug: Added userdb setting: plugin/quota_rule=*:storage=3100b:messages=1024 Apr 17 09:30:35 imap21 dovecot: lmtp(27728, ppp(a)example.net) Debug: Effective uid=500, gid=500, home=/home/ppp Passdb works as it should. IMAP test: Apr 17 09:36:21 imap21 dovecot: auth-worker(27849): Debug: sql(ppp(a)example.net,10.10.128.25): query: SELECT at.userid AS user, at.password AS password, at.home AS userdb_home, at.uid AS userdb_uid, at.gid AS userdb_gid, concat('*:storage=', at.quotabytes, 'b:messages=', at.quotamessages) AS userdb_quota_rule FROM auth at INNER JOIN mailaddr mt ON at.userid = mt.userid WHERE mt.mailaddress = 'ppp(a)example.net' OR at.userid = 'ppp(a)example.net' Apr 17 09:36:21 imap21 dovecot: auth-worker(27849): Debug: sql(ppp(a)example.net,10.10.128.25): username changed ppp(a)example.net -> uppp Apr 17 09:36:21 imap21 dovecot: auth: Debug: sql(ppp(a)example.net,10.10.128.25,<ox/+ouYTQQDDyoAZ>): username changed ppp(a)example.net -> uppp Apr 17 09:36:21 imap21 dovecot: auth: Debug: client passdb out: OK#0111#011user=uppp#011original_user=ppp(a)example.net Apr 17 09:36:21 imap21 dovecot: auth: Debug: master in: REQUEST#0113358588929#01127844#0111#011dbf373ba260f9990e1ea6b688924d513#011session_pid=27850#011request_auth_token Apr 17 09:36:21 imap21 dovecot: auth: Debug: prefetch(uppp,10.10.128.25,<ox/+ouYTQQDDyoAZ>): success Apr 17 09:36:21 imap21 dovecot: auth: Debug: master userdb out: USER#0113358588929#011uppp#011home=/home/ppp#011uid=500#011gid=500#011quota_rule=*:storage=3100b:messages=1024#011auth_token=737d315a5c0e388a0b3dc2bea3c9e333357696d8#011auth_user=ppp@example.net Apr 17 09:36:21 imap21 dovecot: imap-login: Login: user=<uppp>, method=PLAIN, rip=10.10.128.25, lip=10.10.97.201, mpid=27850, TLS, session=<ox/+ouYTQQDDyoAZ> Apr 17 09:36:21 imap21 dovecot: imap: Debug: Loading modules from directory: /usr/lib64/dovecot Apr 17 09:36:21 imap21 dovecot: imap: Debug: Module loaded: /usr/lib64/dovecot/lib10_quota_plugin.so Apr 17 09:36:21 imap21 dovecot: imap: Debug: Module loaded: /usr/lib64/dovecot/lib11_imap_quota_plugin.so Apr 17 09:36:21 imap21 dovecot: imap: Debug: Added userdb setting: plugin/quota_rule=*:storage=3100b:messages=1024 Apr 17 09:36:21 imap21 dovecot: imap(uppp): Debug: Effective uid=500, gid=500, home=/home/ppp Can someone tell what should i do to make this work? Or any idea i could try? It would help if Postfix would be able to run Virtual before the policy check, but thats a problem for the postfix list. :) Thanks! Peter doveconf -n: # 2.2.15: /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.6 (3e924b1b6c5c+) # OS: Linux 2.6.32-504.8.1.el6.x86_64 x86_64 CentOS release 6.6 (Final) auth_debug = yes auth_verbose = yes dict { quota = mysql:/etc/dovecot/dict-quota-sql.conf.ext } mail_access_groups = dovecot mail_debug = yes mail_fsync = always mail_plugins = quota managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave duplicate mbox_write_locks = fcntl mmap_disable = yes namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-example-mysql.conf.ext driver = sql } plugin { quota = dict:User quota::proxy::quota quota_status_nouser = 554 5.5.4 Who the f* is Alice? quota_status_overquota = 552 5.2.2 Mailbox is full quota_status_success = DUNNO } service dict { unix_listener dict { group = dovecot mode = 0660 } } service imap-login { inet_listener imap { port = 143 } } service lmtp { inet_listener lmtp { address = * port = 25 } } service pop3-login { inet_listener pop3 { port = 110 } } service quota-status { client_limit = 1 executable = quota-status -p postfix inet_listener { port = 252 } } ssl = required ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-example-mysql.conf.ext driver = sql } protocol lmtp { mail_plugins = quota } protocol lda { mail_plugins = quota } protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota } /etc/dovecot/dovecot-example-mysql.conf.ext: driver=mysql connect = host=10.10.90.206 dbname=mail user=user password=abcabcabc password_query = SELECT at.userid AS user, at.password AS password, \ at.home AS userdb_home, at.uid AS userdb_uid, at.gid AS userdb_gid, \ concat('*:storage=', at.quotabytes, 'b:messages=', at.quotamessages) AS userdb_quota_rule \ FROM auth at INNER JOIN mailaddr mt ON at.userid = mt.userid WHERE mt.mailaddress = '%u' OR at.userid = '%u' user_query = SELECT at.userid AS user, at.home AS home, at.uid AS uid, at.gid AS gid, \ concat('*:storage=', at.quotabytes, 'b:messages=', at.quotamessages) AS quota_rule \ FROM auth at INNER JOIN mailaddr mt ON at.userid = mt.userid WHERE mt.mailaddress = '%u' OR at.userid = '%u'

1 1

Authentication Error with Dovecot
by Kevin Laurie 18 Apr '15

18 Apr '15

Hello, I have some email authentication error with dovecot. Could someone tell me what is the problem that is indicated below? Is it due to some plugin? Apr 18 21:56:35 auth-worker(2057): Info: mysql(127.0.0.1): Connected to database vmail Apr 18 21:56:35 imap-login: Info: Login: user=<user(a)mydomain.net>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=2058, secured, session=<n/0fGAUUgwB/AAAB> Apr 18 21:56:35 imap: Error: Can't load plugin imap_acl_plugin: Plugin acl must be loaded also (you must set: mail_plugins=$mail_plugins acl) Apr 18 21:56:35 imap: Fatal: Couldn't load required plugins Apr 18 21:56:53 imap-login: Info: Disconnected (auth failed, 1 attempts in 2 secs): user=<user2>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured, session=<z2gKGQUUiQB/AAAB> Apr 18 21:57:05 imap-login: Info: Login: user=<user2(a)mydomain.net>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=2065, secured, session=<5tmoGQUUjQB/AAAB> Apr 18 21:57:05 imap: Error: Can't load plugin imap_acl_plugin: Plugin acl must be loaded also (you must set: mail_plugins=$mail_plugins acl) Apr 18 21:57:05 imap: Fatal: Couldn't load required plugins

2 4

Installing fts-solr on dovecot (centos 6) - [request for help]
by Kevin Laurie 18 Apr '15

18 Apr '15

Hello, I have been trying to get full-text-search on dovecot. I followed the tutorial on this site:- https://extremeshok.com/6622/enabling-apache-solr-4-10-using-jetty-with-dov… The instruction on the page here seems wrong:- sed -i -e 's|mail_plugins = quota|mail_plugins = quotann# Enable fts fts_solr plugin globally for Solr Full Text Search Indexingnmail_plugins = $mail_plugins fts fts_solrnnplugin {nfts = solrn#break-imap-search will use solr for indexing TEXT and BODY searches.nfts_solr = break-imap-search url=http://127.0.0.1:8983/solr/nfts_autoindex = yesn}|' /etc/dovecot.conf I would appreciate if someone could help correct the parameters for the dovecot.conf output shown below. Please help. [root@mail tmp]# cat /etc/dovecot/dovecot.conf # Listen addresses. # - '*' means all available IPv4 addresses. # - '[::]' means all available IPv6 addresses. # Listen on all available addresses by default listen = * [::] #base_dir = /var/run/dovecot mail_plugins = quotann# Enable fts fts_solr plugin globally for Solr Full Text Search Indexingnmail_plugins = $mail_plugins fts fts_solrnnplugin {nfts = solrn#break-imap-search will use solr for indexing TEXT and BODY searches.nfts_solr = break-imap-search url=http://127.0.0.1:8983/solr/nfts_autoindex = yesn} acl # Enabled mail protocols. protocols = pop3 imap sieve lmtp # User/group who owns the message files: mail_uid = 2000 mail_gid = 2000 # Assign uid to virtual users. first_valid_uid = 2000 last_valid_uid = 2000 # Logging. Reference: http://wiki2.dovecot.org/Logging log_path = /var/log/dovecot.log mail_debug = no auth_verbose = no auth_debug = no auth_debug_passwords = no # Possible values: no, plain, sha1. auth_verbose_passwords = no # SSL: Global settings. # Refer to wiki site for per protocol, ip, server name SSL settings: # http://wiki2.dovecot.org/SSL/DovecotConfiguration ssl_protocols = !SSLv2 !SSLv3 ssl = required verbose_ssl = no #ssl_ca =</path/to/ca ssl_cert = </etc/pki/tls/certs/iRedMail.crt ssl_key = </etc/pki/tls/private/iRedMail.key # With disable_plaintext_auth=yes AND ssl=required, STARTTLS is mandatory. # Set disable_plaintext_auth=no AND ssl=yes to allow plain password transmitted # insecurely. disable_plaintext_auth = yes # Allow plain text password per IP address/net #remote 192.168.0.0/24 { # disable_plaintext_auth = no #} # Mail location and mailbox format. mail_location = maildir:/%Lh/Maildir/:INDEX=/%Lh/Maildir/ # Authentication related settings. # Append this domain name if client gives empty realm. auth_default_realm = # Authentication mechanisms. auth_mechanisms = PLAIN LOGIN # Limits the number of users that can be logging in at the same time. # Default is 100. # Note: this value can be overrided by "process_limit =" in service protocol. # e.g. # protocol imap-login { # ... # process_limit = 500 # } #default_process_limit = 100 service auth { unix_listener /var/spool/postfix/private/dovecot-auth { user = postfix group = postfix mode = 0666 } unix_listener auth-master { user = vmail group = vmail mode = 0666 } unix_listener auth-userdb { user = vmail group = vmail mode = 0660 } } # LMTP server (Local Mail Transfer Protocol). # Reference: http://wiki2.dovecot.org/LMTP service lmtp { user = vmail # For higher volume sites, it may be desirable to increase the number of # active listener processes. A range of 5 to 20 is probably good for most # sites. process_min_avail = 5 # Logging. # Require 'info_log_path =' in 'protocol lmtp {}' block. executable = lmtp -L # Listening on socket file and TCP unix_listener /var/spool/postfix/private/dovecot-lmtp { user = postfix group = postfix mode = 0600 } inet_listener lmtp { #address = 192.168.0.24 127.0.0.1 ::1 port = 24 } } # Virtual mail accounts. userdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } passdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } # Master user. # Master users are able to log in as other users. It's also possible to # directly log in as any user using a master password, although this isn't # recommended. # Reference: http://wiki2.dovecot.org/Authentication/MasterUsers auth_master_user_separator = * passdb { driver = passwd-file args = /etc/dovecot/dovecot-master-users master = yes } plugin { auth_socket_path = /var/run/dovecot/auth-master quota = dict:user::proxy::quotadict quota_rule = *:storage=1G #quota_rule2 = *:messages=0 #quota_rule3 = Trash:storage=1G #quota_rule4 = Junk:ignore # Quota warning. # If user suddenly receives a huge mail and the quota jumps from # 85% to 95%, only the 95% script is executed. quota_warning = storage=85%% quota-warning 85 %u quota_warning2 = storage=90%% quota-warning 90 %u quota_warning3 = storage=95%% quota-warning 95 %u # Plugin: autocreate. Create and subscribe to default IMAP folders. autocreate = INBOX autocreate2 = Sent autocreate3 = Trash autocreate4 = Drafts autocreate5 = Junk autosubscribe = INBOX autosubscribe2 = Sent autosubscribe3 = Trash autosubscribe4 = Drafts autosubscribe5 = Junk # Plugin: expire. #expire = Trash 7 Trash/* 7 Junk 30 #expire_dict = proxy::expire # ACL and share folder acl = vfile acl_shared_dict = proxy::acl # By default Dovecot doesn't allow using the IMAP "anyone" or # "authenticated" identifier, because it would be an easy way to spam # other users in the system. If you wish to allow it, #acl_anyone = allow # Pigeonhole managesieve service. # Reference: http://wiki2.dovecot.org/Pigeonhole/Sieve/Configuration # Per-user sieve settings. sieve_dir = /%Lh/sieve sieve = /%Lh/sieve/dovecot.sieve # Global sieve settings. sieve_global_dir = /var/vmail/sieve # Note: if user has personal sieve script, global sieve rules defined in # sieve_default will be ignored. Please use sieve_before or # sieve_after instead. #sieve_default = sieve_before = /var/vmail/sieve/dovecot.sieve #sieve_after = # The maximum number of redirect actions that can be performed during a # single script execution. The meaning of 0 differs based on your version. # For versions v0.3.0 and beyond this means that redirect is prohibited. # For older versions, however, this means that the number of redirects is # unlimited, so be careful. #sieve_max_redirects = 4 } service quota-warning { executable = script /usr/local/bin/dovecot-quota-warning.sh unix_listener quota-warning { user = vmail group = vmail mode = 0660 } } service dict { unix_listener dict { mode = 0660 user = vmail group = vmail } } dict { #expire = db:/var/lib/dovecot/expire/expire.db quotadict = mysql:/etc/dovecot/dovecot-used-quota.conf acl = mysql:/etc/dovecot/dovecot-share-folder.conf } protocol lda { # Reference: http://wiki2.dovecot.org/LDA mail_plugins = $mail_plugins sieve autocreate auth_socket_path = /var/run/dovecot/auth-master log_path = /var/log/dovecot-sieve.log lda_mailbox_autocreate = yes postmaster_address = root } protocol lmtp { # Log file info_log_path = /var/log/dovecot-lmtp.log # Plugins mail_plugins = quotann# Enable fts fts_solr plugin globally for Solr Full Text Search Indexingnmail_plugins = $mail_plugins fts fts_solrnnplugin {nfts = solrn#break-imap-search will use solr for indexing TEXT and BODY searches.nfts_solr = break-imap-search url=http://127.0.0.1:8983/solr/nfts_autoindex = yesn} sieve postmaster_address = postmaster lmtp_save_to_detail_mailbox = yes recipient_delimiter = + } protocol imap { mail_plugins = $mail_plugins imap_quota autocreate imap_acl imap_client_workarounds = tb-extra-mailbox-sep # Maximum number of IMAP connections allowed for a user from each IP address. # NOTE: The username is compared case-sensitively. # Default is 10. # Increase it to avoid issue like below: # "Maximum number of concurrent IMAP connections exceeded" mail_max_userip_connections = 20 } protocol pop3 { mail_plugins = $mail_plugins pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv # Maximum number of IMAP connections allowed for a user from each IP address. # NOTE: The username is compared case-sensitively. # Default is 10. mail_max_userip_connections = 20 } # Login processes. Refer to Dovecot wiki for more details: # http://wiki2.dovecot.org/LoginProcess service imap-login { service_count = 1 # To avoid startup latency for new client connections, set process_min_avail # to higher than zero. That many idling processes are always kept around # waiting for new connections. #process_min_avail = 0 # number of simultaneous IMAP connections #process_limit = $default_process_limit process_limit = 500 # vsz_limit should be fine at its default 64MB value #vsz_limit = 64M } service pop3-login { service_count = 1 # number of simultaneous POP3 connections #process_limit = 500 } namespace { type = private separator = / prefix = #location defaults to mail_location. inbox = yes } namespace { type = shared separator = / prefix = Shared/%%u/ location = maildir:/%%Lh/Maildir/:INDEX=/%%Lh/Maildir/Shared/%%u # this namespace should handle its own subscriptions or not. subscriptions = yes list = children } # Public mailboxes. # Refer to Dovecot wiki page for more details: # http://wiki2.dovecot.org/SharedMailboxes/Public #namespace { # type = public # separator = / # prefix = Public/ # # # CONTROL=: Mark this public folder as read-only mailbox # # INDEX=: Per-user \Seen flag # location = maildir:/var/vmail/public/:CONTROL=~/Maildir/public:INDEX=~/Maildir/public # # # Allow users to subscribe to the public folders. # subscriptions = yes #}

2 4

Please help: error after upgrade to version 2.1.16
by Harald Langner 18 Apr '15

18 Apr '15

Hallo I can not find a forum at dovecot.org and I get a problem I can not solve. After Updating to the version dovecot2 2.1.16 I can no more get eMails with my eMail-client. All has been working fine before. Server: FreeBSD 10.0-RELEASE-p18, with perl 5, version 18, subversion 4 (v5.18.4) It seems it is an authentication problem with my server. The errors are: #cat dovecot.log Apr 17 22:19:37 imap-login: Error: Timeout waiting for handshake from auth server. my pid=41810, input bytes=0 Apr 17 22:19:58 auth: Error: auth: environment corrupt; missing value for DOVECOT_ Apr 17 22:19:58 auth: Fatal: unsetenv(RESTRICT_SETUID) failed: Bad address Apr 17 22:19:58 master: Error: service(auth): command startup failed, throttling for 60 secs Apr 17 22:24:04 auth: Error: auth: environment corrupt; missing value for DOVECOT_ Apr 17 22:24:04 auth: Fatal: unsetenv(RESTRICT_SETUID) failed: Bad address Apr 17 22:24:04 master: Error: service(auth): command startup failed, throttling for 60 secs I have google and has nothing found about "..environment corrupt; missing value for DOVECOT_" and about "auth: Fatal: unsetenv(RESTRICT_SETUID) failed: Bad address" I have make a reinstall - but doesn't help. I get the same error. I have not forget to create new certs with the dovecote shell-script after installation. I'm using passwd (virtual users). Make a cat on passwd shows that it is not empty. Also the date of the file show that the update installation has it not changed. So I have not create the dovecot users again. here are some other logs: #cat dovecot-info.log Apr 17 22:29:03 imap-login: Info: Disconnected: Auth process broken (disconnected before auth was ready, waited 1 secs): user=<>, rip=85.181.222.126, lip=78.47.225.20, TLS handshaking Apr 17 22:29:33 imap-login: Info: Disconnected: Auth process broken (disconnected before auth was ready, waited 30 secs): user=<>, rip=85.181.222.126, lip=78.47.225.20, TLS Apr 17 22:29:33 imap-login: Info: Disconnected: Auth process broken (disconnected before auth was ready, waited 30 secs): user=<>, rip=85.181.222.126, lip=78.47.225.20, TLS #cat dovecot-debug.log Apr 17 22:30:03 auth: Debug: Loading modules from directory: /usr/local/lib/dovecot/auth Apr 17 22:30:03 auth: Debug: Read auth token secret from /var/run/dovecot//auth-token-secret.dat Apr 17 22:34:01 auth: Debug: Loading modules from directory: /usr/local/lib/dovecot/auth Apr 17 22:34:01 auth: Debug: Read auth token secret from /var/run/dovecot//auth-token-secret.dat Apr 17 22:34:01 imap-login: Debug: SSL: where=0x10, ret=1: before/accept initialization [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2001, ret=1: before/accept initialization [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 read client hello A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write server hello A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write certificate A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write key exchange A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write server done A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 flush data [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2001, ret=1: SSLv3 read client certificate A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv3 read client key exchange A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv3 read client key exchange A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv3 read client key exchange A [85.181.222.126] Apr 17 22:34:01 imap-login: Debug: SSL: where=0x2002, ret=-1: SSLv3 read client key exchange A [85.181.222.126] ######################################################################################## My configuration is sendmail(MTA) -> procmail(LDA) -> dovecot(IMAP) with TLS and Maildir (no DB) Authentification been done with dovecot password file (no real user, no OpenLDAP, no other DB-User) #dovecot -n # 2.2.16: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 10.0-RELEASE-p18 amd64 ufs auth_debug = yes auth_mechanisms = digest-md5 plain login auth_verbose = yes auth_verbose_passwords = plain base_dir = /var/run/dovecot/ debug_log_path = /var/log/dovecot-debug.log default_internal_user = vmail default_login_user = vmail deliver_log_format = msgid=%m: %$ %f %s disable_plaintext_auth = no first_valid_uid = 1000 hostname = swdevil.de info_log_path = /var/log/dovecot-info.log lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes log_path = /var/log/dovecot.log login_greeting = IMAPd ready. login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c mail_access_groups = mailnull mail_debug = yes mail_location = maildir:/home/vmail/%d/%n/:INBOX=/home/vmail/%d/%n/.INBOX mail_plugins = " virtual" mail_temp_dir = /tmp/mail namespace inbox { inbox = yes location = prefix = } passdb { args = scheme=DIGEST-MD5 username_format=%n /usr/local/etc/dovecot/pass driver = passwd-file } service auth-worker { group = wheel user = root } service imap-login { group = dovenull inet_listener imap { port = 0 } inet_listener imaps { port = 993 } } service imap { process_limit = 100 } service pop3-login { group = dovenull inet_listener pop3 { port = 0 } inet_listener pop3s { port = 0 } } service pop3 { process_limit = 100 } ssl = required ssl_cert = </usr/local/etc/dovecot/certs/dovecot_ssl_crt.pem ssl_key = </usr/local/etc/dovecot/certs/dovecot_ssl_key.pem userdb { args = uid=vmail gid=vmail home=/home/vmail/%d/%n driver = static } verbose_proctitle = yes verbose_ssl = yes protocol pop3 { pop3_uidl_format = %08Xu%08Xv } Many thanks for Your advice what could be wrong. Harald Langner EU (Germany)

2 3

Problem: mail moved by thunderbird script is invisible to mail clients, but in cur directory
by David Gessel 18 Apr '15

18 Apr '15

Over the last year I've had a script moving old mail (120 days) into my annual archive folder. This is the first year I've done this with Dovecot, previously it was running against Cyrus. There's nothing particularly clever: a few conditions to match, then "move message to" the appropriate archive folder. There's one for every year from 2000 to 2015. 2015 is just barely ahead of need. 2014 has about a year's mail in the cur directory. The 2000-2013 folders were filled by Cyrus and were migrated over using IMAP Migrate. They're fine, and read normally. The 2014 layout looks normal to me # ls cur dovecot-uidlist dovecot.index.cache dovecot.index.log.2 new dovecot-keywords dovecot.index dovecot.index.log maildirfolder tmp Permissions are the same as every other folder, as is owner: drw-r----- 2 vmail vmail 9.6K Apr 12 21:13 cur and # ls | wc -l 9822 I've checked with Thunderbird, Mulberry, Claws, and Sylpheed - none can read the directory. The files look normal: 2014/cur 1426411329.M123928P26360.host.domain.com,S=3523,W=3591:2,R More or less the same as a working directory: 2013/cur 1405500734.M958596P27867.host.domain.com,S=794,W=819:2,RS I've run # doveadm force-resync -u user .archives.2014 and nothing changed. I'm at a bit of a loss since no client can read them, something like moving them to another folder and back is a little complicated. Any hints?

3 3

ManageSieve Dovecot v2 listen on localhost only
by trash＠skrilnetz.net 17 Apr '15

17 Apr '15

Hi, How can I only listen on localhost for ManageSieve? I tried: port = localhost:4190 still listening *: tcp 0 0 0.0.0.0:4190 0.0.0.0:* LISTEN 0 515675 20540/dovecot Would did I not get here? Thanks,

3 5

Replace autocreate after upgrading
by trash＠skrilnetz.net 17 Apr '15

17 Apr '15

Hi, I just upgraded to 2.2.9 and found out that autocreate should not be used any more. I had a look at http://wiki2.dovecot.org/MailboxSettings and I tried to replace my old config but I had no success. Would somebody be so and help me to change my config? Here is my old config: http://pastebin.com/zFUAQmV3 Thanks,

2 1

Potentially breaking dict-proxy (dict-sql) backwards compatibility
by Timo Sirainen 17 Apr '15

17 Apr '15

Looks like the dict-proxy code doesn't currently do escaping newlines properly, but it still accidentally happens to work, because the data is stored in the escaped form. I'm thinking about fixing this, but this might break somebody's existing dict usage. But then again maybe nobody is actually using it now, especially because it hasn't been working exactly as expected. So, can anybody tell me if they're currently using a combination of: - dict proxy (especially to dict sql) - containing values which can contain LFs (or TABs) I guess this mainly means storing Sieve scripts or IMAP METADATA to SQL. Or maybe somebody is using dict (via proxy) for their own purposes?..

1 0