- dovecot - dovecot.org

TLS config check
by SW 07 Feb '15

07 Feb '15

Hi All First the essentials: dovecot --version: 2.2.15 /usr/local/etc/dovecot/conf.d/10-ssl.conf: ssl = required ssl_cert = </usr/local/openssl/certs/mail.domain.com.chained.dovecot.ecdsa.crt ssl_key = </usr/local/openssl/certs/mail.domain.com.ecdsa.key ssl_protocols = !SSLv2 !SSLv3 ssl_cipher_list = HIGH:EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA384:EECDH+ECDSA+SHA256:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH:EDH+aRSA:ECDHE-RSA-AES256-SHA:+DHE-RSA-AES256-SHA:!AES256-SHA256:!AES256-GCM-SHA384:!CAMELLIA256-SHA:!AES128:!CAMELLIA128:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS:!RC4:!SEED:+AES256-SHA ssl_prefer_server_ciphers = yes I would really appreciate it if someone could tell me if my config is super secure? I run the following email clients: K9 on Android 4.4.2 Thunderbird 31.4 Outlook 2010 I'm interested to know if the config I have is secure and that my cipher list is acceptable. I'm also keen to hear thoughts on my config in respect of Forward Secrecy and the SSLv3/POODLE attack. Thanks!

5 9

Re: Interface for managing users?
by Thomas Moulia 06 Feb '15

06 Feb '15

Hello, > It's actually the way around: pick any user management and configure > Dovecot to use its database. > Depending on what you want, you need a system, that also removes the > user's home dirs and/or creates them from a skeleton. Makes sense, and is nicely simple. > After doing a change in the user database, make sure to run > doveadm auth cache flush > to force Dovecot to pick up the changes, before you fire up the next test. Ah, good to know -- that would've bit me. Thanks for the help, Steffen! -Thomas

1 0

doveadm quota get doesn't recalculate quota (Maildir backend)
by Teodor Milkov 06 Feb '15

06 Feb '15

Hello, I've noticed that "doveadm quota get" doesn't recalculate quota if maildirsize file is missing for some reason. It just says quota is unknown, usage is 0. In contrast, vpopmail does regenerate maildirsize if it is missing. Reading the Maildir++ specification there is this part: ...If maildirsize does not exist, or if its size is at least 5120 bytes, recalculate it using the procedure defined above, and use the recalculated numbers... One seemingly legitimate reason for maildirsize to be missing is when vpopmail mailbox is set to NOQUOTA (i.e. no limits). My workaround to this is to use a fallback quota: quota_rule = ?:messages=10000000 That is, if there's no backend limit detected (missing maildirsize) then fallback to 10 mln message count quota. In this case doveadm quota get _does_ recalculate usage and even creates maildirsize file. So, my questions are: 1. Isn't it still better to calculate and show usage even if maildirsize is missing? Because calling quota recalc and then quota get is racy - someone else may change configuration or usage etc. between our two calls (forks). 2. If there's good reason against implicit recalculation, then maybe quota get output should be more specific that neither quota nor usage are known? Instead of usage=0 show -1 or "-" or "n/a" or "unkown"?

1 0

Resubmission after N days
by Thomas Güttler 06 Feb '15

06 Feb '15

Hi, I would like to implement a 43Folder system[1] with dovecot and a mail user agent. Use case: - I have a new mail in my inbox. I read it and see that I can't handle it now. I want to handle this mail in 5 days. - Now I want to have some sort of resubmission: the mail should be moved to a different location for these 5 days. - After 5 days the mail should be moved to my inbox again. How can this be done with Dovecot/IMAP? I have programming experience, but I am new to Dovecot/IMAP. I would like solve this with Dovecot only (without a database or web server). Does the IMAP protocol over methods which could help? [1] 43Folder https://en.wikipedia.org/wiki/Tickler_file -- http://www.thomas-guettler.de/

7 16

dsync and smooth conversion of Maildir to mdbox
by Sven Strickroth 06 Feb '15

06 Feb '15

Hi, I was experimenting with dsync for Maildir to mdbox conversion. Two isses arised there: * "subscriptions" only contained subscriptions of that namespace, all others were lost - Is there any configuration missing on my side? * "dovecot-acl-list" and "dovecot-acl" shares/permissions were not synced; UPDATE: if I also add "acl" to "mail_plugins" when running dsync (using -o mail_plugins="acl zlib") it works, however, all documentation, e.g. the wiki2, only mention to add acl to lmtp/lda and imap services. - Is there any problem adding acl to "global" mail_plugins? Regarding shared namespace: I cannot convert all mailboxes at once and have to do it mailbox after mailbox. The setting "location = maildir:%%h/Maildir" won't work as some mailboxes are already converted and others aren't. Is there a way to cope with that? "doveconf -n" outout: # 2.2.13: /etc/dovecot/dovecot.conf # OS: Linux 3.16-0.bpo.3-amd64 x86_64 Debian 7.8 dict { acldict = mysql:/etc/dovecot/dovecot-dict-user_shares.conf quotadict = mysql:/etc/dovecot/dovecot-dict-quota.conf } mail_gid = 8 mail_location = maildir:%h/Maildir mail_plugins = quota zlib mail_privileged_group = mail mail_shared_explicit_inbox = yes mail_uid = 999 namespace { list = children location = maildir:%%h/Maildir prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes list = yes location = prefix = separator = / subscriptions = yes type = private } passdb { args = /etc/dovecot/79p-sql.conf driver = sql } plugin { acl = vfile acl_anyone = allow acl_shared_dict = proxy::acldict quota = dict:user::proxy::quotadict quota_grace = 0 quota_rule2 = Trash:bytes=+100M } protocols = " imap lmtp" service auth { unix_listener auth-userdb { group = mail mode = 0660 user = vmail } } service dict { unix_listener dict { group = mail mode = 0660 user = vmail } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { mode = 0600 user = postfix } user = vmail } userdb { driver = prefetch } userdb { args = /etc/dovecot/79p-sql.conf driver = sql } -- Best regards, Sven Strickroth PGP key id F5A9D4C4 @ any key-server

1 0

Interface for managing users?
by Thomas Moulia 06 Feb '15

06 Feb '15

Hey all, I'd like to use dovecot as an testing/benchmarking IMAP server for switchboard (https://github.com/thusfresh/switchboard) As part of the tests, I need to add and destroy dovecot users. Is there an interface or tool for this sort of user management at a higher-level than editing the user store, e.g. passwd-file, sql, ...? Also, more generally, are there any tools for using dovecot to test against? Thanks! -Thomas

2 1

dovecot.index.log in Maildir/cur
by George Sexton 06 Feb '15

06 Feb '15

I'm seeing two bogus messages appearing my Maildir/cur directory. They're dovecot.index.log and dovecot-uidlist. -rw------- 1 gsexton users 51 Feb 4 09:04 Maildir/cur/dovecot-uidlist:2,S -rw------- 1 gsexton users 244 Feb 4 09:04 Maildir/cur/dovecot.index.log These files are only appearing in the Maildir/cur directory, and not in any other directory that mail is delivered to (e.g. mail list directories). I'm using the current version of Mozilla Thunderbird as my mail client. Mail is delivered to Maildir/ by procmail. I was originally using Courier, but changed to dovecot. I did run the conversion program on all the mail boxes. Other than these If anyone could help me understand what I'm doing wrong, I'd appreciate it. I've researched the mail list and read the wiki articles, but I'm just not seeing anything that looks helpful. Here's my config info: # 2.2.13: /etc/dovecot/dovecot.conf # OS: Linux 3.16.7-7-default x86_64 openSUSE 13.2 (x86_64) -> File System: btrfs mail_location = maildir:~/Maildir managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = INBOX. separator = . } passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap service imap-login { inet_listener imaps { port = 993 ssl = yes } } ssl = required ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem ssl_key_password = ************ ssl_protocols = !SSLv2 !SSLv3 userdb { driver = passwd } protocol imap { mail_max_userip_connections = 20 } -- George Sexton *MH Software, Inc.* Voice: 303 438 9585 http://www.mhsoftware.com

2 4

Re: Re: auth: Warning: DNS lookup took 1.550 s
by Joseph Tam 06 Feb '15

06 Feb '15

ML mail writes: > My fault here, I should have precised that the DNS query it tries to > resolve is simply the DNS name of my mailbox server > (mailboxserver.domain.com) So domain.com is hosted locally on DNS > servers on that very same network as the dovecot servers are located. > Furthermore all the resolvers I use in /etc/resolv.conf are also local > DNS resolvers on that same LAN. All the DNS servers (authoritative and > recursive) are using PowerDNS. That's why I was really puzzled to see > that it can take up to 1.5 seconds to query my own local DNS servers > which are in no way overloaded. That really doesn't change my answer, but since you control the entire DNS chain of query and response, you can further debug it at the server end via logs or network tracing. And you should still run a comprehesive DNS trace (e.g. http://dns.squish.net/) since a misconfiguration could still cause your DNS resolver to go on wild goose chases. In either case, it's probably not Dovecot related. If you want to triage it, just enter static entries into your proxy's /etc/hosts file. Or use bare IPs in your configurations. Joseph Tam <jtam.home(a)gmail.com>

1 0

Block folder names in IMAP
by André Peters 05 Feb '15

05 Feb '15

Hi, I just merged to Maildir "/" as separator with a fs layout. So I am afraid of running into problems when someone creates a folder named "new", "cur", etc. ... I know I could work this around, but isn't there a way to block folders by their name from being created? Thank you! -- André Peters

1 0

Bug when using METADATA and ACLs
by Sergio Talens-Oliag 05 Feb '15

05 Feb '15

Hi, I'm trying to use the current version of dovecot as the IMAP server for Kolab and things seem to be working more or less OK, but while working on it I've found a dovecot bug that can probably be fixed quickly by someone familiar with the code. I've found the problem using shared folders, but it is related to ACLs and METADATA. The problem appears when a user only has the 'l' (lookup) permission on a folder and later tries to get METADATA from all his or her folders; a sample session to ilustrate the problem: A1 GETACL "foo" * ACL foo admin akxeilprwtscd -admin "" sto(a)iti.es lrwstipekxacd A1 OK Getacl completed. A2 SETACL "foo" sto(a)iti.es l A2 OK Setacl complete. A3 GETACL "foo" * ACL foo admin akxeilprwtscd -admin "" sto(a)iti.es al A3 OK Getacl completed. A4 GETMETADATA "foo" (/private/vendor/kolab/folder-type /shared/vendor/kolab/folder-type) A4 NO [NOPERM] Permission denied A5 GETMETADATA "*" (/private/vendor/kolab/folder-type /shared/vendor/kolab/folder-type) <CORE DUMPED> The dovecot.log messages are: Feb 05 13:59:12 imap(sto(a)iti.es): Panic: file imap-client.c: line 636 (client_command_free): assertion failed: (client->output_cmd_lock == NULL) Feb 05 13:59:12 imap(sto(a)iti.es): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x756cf) [0x7f55ab3da6cf] -> /usr/lib/dovecot/libdovecot.so.0(+0x7572e) [0x7f55ab3da72e] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f55ab38c575] -> dovecot/imap [sto(a)iti.es 127.0.0.1 GETMETADATA](+0x18c9e) [0x7f55abba5c9e] -> dovecot/imap [sto(a)iti.es 127.0.0.1 GETMETADATA](+0x18e9a) [0x7f55abba5e9a] -> dovecot/imap [sto(a)iti.es 127.0.0.1 GETMETADATA](+0x18ef4) [0x7f55abba5ef4] -> dovecot/imap [sto(a)iti.es 127.0.0.1 GETMETADATA](client_handle_input+0x115) [0x7f55abba61e5] -> dovecot/imap [sto(a)iti.es 127.0.0.1 GETMETADATA](client_input+0x75) [0x7f55abba65b5] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x5b) [0x7f55ab3ec51b] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0xbb) [0x7f55ab3ed59b] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x9) [0x7f55ab3ec5a9] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7f55ab3ec628] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f55ab391a43] -> dovecot/imap [sto(a)iti.es 127.0.0.1 GETMETADATA](main+0x2b7) [0x7f55abb9a717] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7f55aaff7ead] -> dovecot/imap [sto(a)iti.es 127.0.0.1 GETMETADATA](+0xd889) [0x7f55abb9a889] Feb 05 13:59:12 imap(sto(a)iti.es): Fatal: master: service(imap): child 32404 killed with signal 6 (core dumped) And the gdb output is (my binary has no debug symbols, so I guess it is not really useful): (gdb) bt full #0 0x00007f55ab00b165 in raise () from /lib/x86_64-linux-gnu/libc.so.6 No symbol table info available. #1 0x00007f55ab00e3e0 in abort () from /lib/x86_64-linux-gnu/libc.so.6 No symbol table info available. #2 0x00007f55ab3da6c5 in ?? () from /usr/lib/dovecot/libdovecot.so.0 No symbol table info available. #3 0x00007f55ab3da72e in ?? () from /usr/lib/dovecot/libdovecot.so.0 No symbol table info available. #4 0x00007f55ab38c575 in i_panic () from /usr/lib/dovecot/libdovecot.so.0 No symbol table info available. #5 0x00007f55abba5c9e in client_command_free () No symbol table info available. #6 0x00007f55abba5e9a in ?? () No symbol table info available. #7 0x00007f55abba5ef4 in ?? () No symbol table info available. #8 0x00007f55abba61e5 in client_handle_input () No symbol table info available. #9 0x00007f55abba65b5 in client_input () No symbol table info available. #10 0x00007f55ab3ec51b in io_loop_call_io () from /usr/lib/dovecot/libdovecot.so.0 No symbol table info available. #11 0x00007f55ab3ed59b in io_loop_handler_run_internal () from /usr/lib/dovecot/libdovecot.so.0 No symbol table info available. #12 0x00007f55ab3ec5a9 in io_loop_handler_run () from /usr/lib/dovecot/libdovecot.so.0 No symbol table info available. #13 0x00007f55ab3ec628 in io_loop_run () from /usr/lib/dovecot/libdovecot.so.0 No symbol table info available. #14 0x00007f55ab391a43 in master_service_run () from /usr/lib/dovecot/libdovecot.so.0 No symbol table info available. #15 0x00007f55abb9a717 in main () No symbol table info available. If someone can look into it I will be grateful; of course if more info is needed I'm available to help as much as I can. Thanks in advance, Sergio. -- Sergio Talens-Oliag <sto(a)iti.es> <http://www.iti.es/> Key fingerprint = FF77 A16B 9D09 FC7B 6656 CFAD 261D E19A 578A 36F2

1 0