- dovecot - dovecot.org

[Pigeonhole Sieve interpreter] :create argument and lda_mailbox_autosubscribe setting
by Vivien Lacourba 13 Oct '14

13 Oct '14

Hi, I am using dovecot and dovecot-sieve packages from Debian Wheezy (2.1.7-7+deb7u1). I noticed that while using ":create" (from the mailbox extension) in my Sieve filter and "lda_mailbox_autosubscribe = yes" in Dovecot's LDA config it automatically subscribes to the destination mailbox even if that mailbox already existed. Reading Dovecot's documentation and the mailbox extension RFC it seems subscription should happen only if it is a newly created mailbox and should not happen if the mailbox already existed. http://tools.ietf.org/html/rfc5490#section-3.2 [[ 3.2. ":create" Argument to "fileinto" Command (...) If the mailbox already exists, this argument is ignored. (...) ]] /etc/dovecot/conf.d/15-lda.conf [[ # Should automatically created mailboxes be also automatically subscribed? lda_mailbox_autosubscribe = yes ]] Also I noticed that if I don't use ":create" in my filters and instead set "lda_mailbox_autocreate = yes" in Dovecot's LDA config, then this time the behavior looks correct as the automatic subscription will only happen for a newly created mailbox. Thanks, Vivien -- Vivien Lacourba World Wide Web Consortium Systems & Network Engineer http://www.w3.org vivien(a)w3.org Tel: +33.4.92.38.78.89 http://www.w3.org/People/Vivien Fax: +33.4.92.38.78.22 -- Vivien Lacourba World Wide Web Consortium Systems & Network Engineer http://www.w3.org vivien(a)w3.org Tel: +33.4.92.38.78.89 http://www.w3.org/People/Vivien Fax: +33.4.92.38.78.22

2 1

Re: Mailbox format
by Gedalya 13 Oct '14

13 Oct '14

On 10/13/2014 05:29 PM, Jorge Bastos wrote: > Guys, > > Whats the best mailbox format: > - dbox Dovecot-specific. Higher performance, saves I/O. > - mbox Don't bother. > - maildir Simple, compatible, resilient. > - ?!? > > Pros and cons? > No short answer is the right answer. Try to thoroughly read http://wiki2.dovecot.org/MailboxFormat and child pages.

1 0

Re: Compile dovecot with sieve/managesieve support
by Daniel Parthey 13 Oct '14

13 Oct '14

Hi, please have a look at http://wiki2.dovecot.org/Pigeonhole/Installation Kind regards Daniel

1 0

Mailbox format (was: RE: Compile dovecot with sieve/managesieve support)
by Jorge Bastos 13 Oct '14

13 Oct '14

Guys, Whats the best mailbox format: - dbox - mbox - maildir - ?!? Pros and cons? > -----Original Message----- > From: dovecot [mailto:dovecot-bounces@dovecot.org] On Behalf Of Jorge > Bastos > Sent: segunda-feira, 13 de Outubro de 2014 21:35 > To: dovecot(a)dovecot.org > Subject: RE: Compile dovecot with sieve/managesieve support > > I see, > > If i need anything else i'll post, > > Thanks, > > > -----Original Message----- > > From: Larry Rosenman [mailto:larryrtx@gmail.com] > > Sent: segunda-feira, 13 de Outubro de 2014 21:05 > > To: Jorge Bastos > > Subject: Re: Compile dovecot with sieve/managesieve support > > > > Pigeonhole does ManageSieve as well...... > > > > On 10/13/14, Jorge Bastos <mysql.jorge(a)decimal.pt> wrote: > > > Larry & Pascal, > > > > > > Thanks for the reply. > > > > > > Ok this is the lib for sieve, and the sieved, I see in debian > > packages > > > that there is a dovecot-managesieved, the daemon, does this > > pigeonhole > > > is the daemon also? > > > > > >> -----Original Message----- > > >> From: Larry Rosenman [mailto:larryrtx@gmail.com] > > >> Sent: segunda-feira, 13 de Outubro de 2014 20:12 > > >> To: Jorge Bastos > > >> Subject: Re: Compile dovecot with sieve/managesieve support > > >> > > >> look at pigeonhole. That's the Sieve implementation for Dovecot > > >> 2.x > > >> > > >> On 10/13/14, Jorge Bastos <mysql.jorge(a)decimal.pt> wrote: > > >> > Hi guys, > > >> > > > >> > > > >> > > > >> > I'd like to have dovecot with sieve support, but can't find any > > >> > information on how to enable the sieve/managesieve support. > > >> > > > >> > Does anyone can light me up on this? > > >> > > > >> > > > >> > > > >> > Thanks, > > >> > > > >> > > > >> > > > >> > > >> > > >> -- > > >> Larry Rosenman http://www.lerctr.org/~ler > > >> Phone: +1 214-642-9640 (c) E-Mail: larryrtx(a)gmail.com > > >> US Mail: 108 Turvey Cove, Hutto, TX 78634-5688 > > > > > > > > > -- > > Larry Rosenman http://www.lerctr.org/~ler > > Phone: +1 214-642-9640 (c) E-Mail: larryrtx(a)gmail.com > > US Mail: 108 Turvey Cove, Hutto, TX 78634-5688

1 0

RE: Compile dovecot with sieve/managesieve support
by Jorge Bastos 13 Oct '14

13 Oct '14

I see, If i need anything else i'll post, Thanks, > -----Original Message----- > From: Larry Rosenman [mailto:larryrtx@gmail.com] > Sent: segunda-feira, 13 de Outubro de 2014 21:05 > To: Jorge Bastos > Subject: Re: Compile dovecot with sieve/managesieve support > > Pigeonhole does ManageSieve as well...... > > On 10/13/14, Jorge Bastos <mysql.jorge(a)decimal.pt> wrote: > > Larry & Pascal, > > > > Thanks for the reply. > > > > Ok this is the lib for sieve, and the sieved, I see in debian > packages > > that there is a dovecot-managesieved, the daemon, does this > pigeonhole > > is the daemon also? > > > >> -----Original Message----- > >> From: Larry Rosenman [mailto:larryrtx@gmail.com] > >> Sent: segunda-feira, 13 de Outubro de 2014 20:12 > >> To: Jorge Bastos > >> Subject: Re: Compile dovecot with sieve/managesieve support > >> > >> look at pigeonhole. That's the Sieve implementation for Dovecot 2.x > >> > >> On 10/13/14, Jorge Bastos <mysql.jorge(a)decimal.pt> wrote: > >> > Hi guys, > >> > > >> > > >> > > >> > I'd like to have dovecot with sieve support, but can't find any > >> > information on how to enable the sieve/managesieve support. > >> > > >> > Does anyone can light me up on this? > >> > > >> > > >> > > >> > Thanks, > >> > > >> > > >> > > >> > >> > >> -- > >> Larry Rosenman http://www.lerctr.org/~ler > >> Phone: +1 214-642-9640 (c) E-Mail: larryrtx(a)gmail.com > >> US Mail: 108 Turvey Cove, Hutto, TX 78634-5688 > > > > > -- > Larry Rosenman http://www.lerctr.org/~ler > Phone: +1 214-642-9640 (c) E-Mail: larryrtx(a)gmail.com > US Mail: 108 Turvey Cove, Hutto, TX 78634-5688

1 0

RE: Compile dovecot with sieve/managesieve support
by Jorge Bastos 13 Oct '14

13 Oct '14

Larry & Pascal, Thanks for the reply. Ok this is the lib for sieve, and the sieved, I see in debian packages that there is a dovecot-managesieved, the daemon, does this pigeonhole is the daemon also? > -----Original Message----- > From: Larry Rosenman [mailto:larryrtx@gmail.com] > Sent: segunda-feira, 13 de Outubro de 2014 20:12 > To: Jorge Bastos > Subject: Re: Compile dovecot with sieve/managesieve support > > look at pigeonhole. That's the Sieve implementation for Dovecot 2.x > > On 10/13/14, Jorge Bastos <mysql.jorge(a)decimal.pt> wrote: > > Hi guys, > > > > > > > > I'd like to have dovecot with sieve support, but can't find any > > information on how to enable the sieve/managesieve support. > > > > Does anyone can light me up on this? > > > > > > > > Thanks, > > > > > > > > > -- > Larry Rosenman http://www.lerctr.org/~ler > Phone: +1 214-642-9640 (c) E-Mail: larryrtx(a)gmail.com > US Mail: 108 Turvey Cove, Hutto, TX 78634-5688

1 0

Re: Compile dovecot with sieve/managesieve support
by Pascal Volk 13 Oct '14

13 Oct '14

On 10/13/2014 07:10 PM, Jorge Bastos wrote: > Hi guys, > > > > I'd like to have dovecot with sieve support, but can't find any information > on how to enable the sieve/managesieve support. > > Does anyone can light me up on this? http://wiki2.dovecot.org/Pigeonhole should provide all the information you need. Regards, Pascal -- The trapper recommends today: defaced.1428621(a)localdomain.org

1 0

Compile dovecot with sieve/managesieve support
by Jorge Bastos 13 Oct '14

13 Oct '14

Hi guys, I'd like to have dovecot with sieve support, but can't find any information on how to enable the sieve/managesieve support. Does anyone can light me up on this? Thanks,

1 0

To dovecot-ee or not to dovecot-ee
by Jens Dueholm Christensen 13 Oct '14

13 Oct '14

Hi At the moment I'm running an ageing 2.0.13 install that need to be upgraded and moved to new HW. I was looking around, and saw that dovecot-ee is listed as a "free" (ie. 0$) product on dovecot.fi. Apart from the need to register an account in order to "purchase" an -ee license, are there any cavats by switching to the -ee version compared to compiling and running the regular releases? I've got no problems with downloading, building and installing the normal releases and I have no need for object storage, so will the -ee version give me anything else but access to a YUM repo and RPM packages? Regards, Jens Dueholm Christensen Survey IT

3 2

Dovecot domain quota
by Filip Bartmann 13 Oct '14

13 Oct '14

I have dovecot version 2.1.7 and I have quota configured as: ----------------------------------- dict { quota_domain = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } mail_plugins = quota protocol imap { mail_plugins = quota quota imap_quota } plugin { quota = dict:domain:%d:proxy::quota_domain quota_rule = *:storage=1M quota_rule2 = Trash:storage=+100M } ----------------------------------- /etc/dovecot/dovecot-dict-sql.conf.ext: ----------------------------------- map { pattern = priv/quota/storage table = quota_dict username_field = domain value_field = bytes } map { pattern = priv/quota/messages table = quota_dict username_field = domain value_field = messages } map { pattern = shared/expire/$user/$mailbox table = expires value_field = expire_stamp fields { username = $user mailbox = $mailbox } } ----------------------------------- But the problem is that quota table created as: ----------------------------------- CREATE TABLE `quota_dict` ( `domain` varchar(255) NOT NULL, `bytes` bigint(20) NOT NULL DEFAULT '0', `messages` int(5) NOT NULL DEFAULT '0', PRIMARY KEY (`domain`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1 ----------------------------------- counts quota only for last user as defined /etc/dovecot/users or in database table. So if I have in /etc/dovecot/users (the contents is from testing VPS): ----------------------------------- test@debian.jd:{plain}radegast:8:8::/srv/mail/debian.jd/::userdb_quota_rule=*:storage=500k bartmann@debian.jd:{plain}radegast:8:8::/srv/mail/debian.jd/::userdb_quota_rule=*:storage=500k ----------------------------------- After running `doveadm quota recalc -A` I have in my db: ----------------------------------- +-----------+--------+----------+ | domain | bytes | messages | +-----------+--------+----------+ | debian.jd | 505758 | 81 | +-----------+--------+----------+ ----------------------------------- whith is from account bartmann(a)debian.jd not both accounts at testing VPS domain debian.jd. The same is with quota enforcing - quota if enforced on the latter of the accounts in /etc/dovecot/users on testing machine or database in production machine. What I do wrong? Thanks Filip Bartmann

4 5