- dovecot - dovecot.org

Re: [Dovecot] integration of old mails into new dovecot Maildir
by K. C. Mohan 14 Apr '14

14 Apr '14

Thank you Steffen, for addressing my problem of migrating old mails into new mail server. I went through the article you pointed to but could not succueed. I will appreciate if you could guide me to step by step process to migrate the mails. My old mail server used 2.x dovecot version. K. C. Mohan -----Original Message----- From: Steffen Kaiser Sent: Thursday, April 10, 2014 6:14 AM To: K. C. Mohan - Personal s Cc: dovecot(a)dovecot.org Subject: Re: [Dovecot] integration of old mails into new dovecot Maildir -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Tue, 8 Apr 2014, K. C. Mohan - Personal wrote: > I just installed dovecot 2.2.9 on to a new server and want to transfer all > the old mails into the email accounts I imported from the previous server > into MySQL database. I am not able to view the subfolders and or old mails > that I copied into their respective maildir folders. I was very much > appreciate if anyone could let me know how to import old mails into the > new > server. All I see, is the new mails that have come into the account since > I > started dovecot service in the new server. Check out http://wiki2.dovecot.org/Migration . Read esp. about "preserving messages' UIDs". If the old server uses Maildir, too, and you don't care about the UIDs, copy the files over and you are done. - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEVAwUBU0Zu/3D1/YhP6VMHAQKO0QgA7v5CowgoagbvEC3S0XI3k3QUHlsUczLE 38MedNzPw8cc69OHwzWxfxDiuCU2g2Q+Bv1vKMp+7aY2e9nCwUKcT0tOZGf7Nxrw IDG5dJbRtQSwTSOOvHSj1/SLY/tbYB71NkAPZl3XunFKcbkGl2BYKDfj+BuZ+WMZ pDj6B9S8GuV7BJNWlP4fRaHyrGDwfYuUmj1bTEoNuAFFPW11HfAwxRUQgnOKU9GJ zxERX2Tg7+Xj/RM49InQd8qqczYjsNte6M58a+6dwStGkPK4y0XD8nwsH8r4skvN utKKG+dRln+94oVnSG8WNNKpVmZt8K9oNHWq1CxVRIoqu2tUmppr0g== =qQnO -----END PGP SIGNATURE-----

2 1

[Dovecot] FTS autoindex username problem
by 李耀宗 13 Apr '14

13 Apr '14

I tried to set up Solr search server according to http://wiki2.dovecot.org/Plugins/FTS/Solr, and turned on autoindexing according to http://wiki2.dovecot.org/Plugins/FTS, but I found a strange behaviour that cause server search missing some emails. Here is the login information of my mail server: login name: user1 email: user1(a)example.com Now, when I turned on autoindexing, all autoindexed email are indexed using user1(a)example.com as username key, as shown in maillog: dovecot: [ID 12345 mail.info] indexer-worker(user1(a)example.com): Indexed 1 messages in INBOX But when I triggered on-demand indexing using IMAP server search, the emails are indexed using user1 as username key instead, as shown in maillog: dovecot: [ID 12345 mail.info] indexer-worker(user1): Indexed 1799 messages in INBOX Only the emails indexed using user1 can be searched, emails indexed using user1(a)example.com cannot be found. How can I configure autoindex to index email using user1 as username key? --- (Below is a follow-up question) In my mail server config, there are a few virtual mailbox users are using the following login information instead (different auth/password backend): login name: user2(a)virtmail.example.com email: user2(a)virtmail.example.com In this case, how can I distinguish user1(a)example.com and user2(a)virtmail.example.com, so that emails for user1(a)example.com can be indexed using user1 as username key, while user2(a)virtmail.example.com can be indexed using user2(a)virtmail.example.com as username key? .

2 2

[Dovecot] Still no messages from dovecot
by Steve Campbell 12 Apr '14

12 Apr '14

I'm still not seeing emails from the list. With help from others, I thought I had the IPs cleared since the change back in February, but apparently not. Can someone PM me and let me know what outgoing IP addresses the list is using please? steve campbell

2 1

[Dovecot] Will upgrade from from db4 to libdb break anything?
by A M 11 Apr '14

11 Apr '14

Hello, I just have a minor question. (Using Fedora 16) My current dovecot (2.2.10) was compiled with db4 (4.8.30). I am thinking of recompiling same dovecot (2.2.10) with libdb (5.2.36). I will be trying on live server so just wanted to know if this will this break any indexing or anything else? (Recompiling for Heartbleed, so might as well switch db version) AM.

1 0

[Dovecot] FTS autoindex username problem
by lee_yiu_chung＠yahoo.com 11 Apr '14

11 Apr '14

I tried to set up Solr search server according to http://wiki2.dovecot.org/Plugins/FTS/Solr, and turned on autoindexing according to http://wiki2.dovecot.org/Plugins/FTS, but I found a strange behaviour that cause server search missing some emails. Here is the login information of my mail server: version: 2.2.12 login name: user1 email: user1(a)example.com Now, when I turned on autoindexing, all autoindexed email are indexed using user1(a)example.com as username key, as shown in maillog: dovecot: [ID 12345 mail.info] indexer-worker(user1(a)example.com): Indexed 1 messages in INBOX But when I triggered on-demand indexing using IMAP server search, the emails are indexed using user1 as username key instead, as shown in maillog: dovecot: [ID 12345 mail.info] indexer-worker(user1): Indexed 1799 messages in INBOX Only the emails indexed using user1 can be searched, emails indexed using user1(a)example.com cannot be found. How can I configure autoindex to index email using user1 as username key? --- (Below is a follow-up question) In my mail server config, there are a few virtual mailbox users are using the following login information instead (different auth/password backend): login name: user2(a)virtmail.example.com email: user2(a)virtmail.example.com In this case, how can I distinguish user1(a)example.com and user2(a)virtmail.example.com, so that emails for user1(a)example.com can be indexed using user1 as username key, while user2(a)virtmail.example.com can be indexed using user2(a)virtmail.example.com as username key?

1 0

[Dovecot] FTS autoindex username problem
by lee_yiu_chung＠yahoo.com 11 Apr '14

11 Apr '14

I tried to set up Solr search server according to http://wiki2.dovecot.org/Plugins/FTS/Solr, and turned on autoindexing according to http://wiki2.dovecot.org/Plugins/FTS, but I found a strange behaviour that cause server search missing some emails. Here is the login information of my mail server: login name: user1 email: user1(a)example.com Now, when I turned on autoindexing, all autoindexed email are indexed using user1(a)example.com as username key, as shown in maillog: dovecot: [ID 12345 mail.info] indexer-worker(user1(a)example.com): Indexed 1 messages in INBOX But when I triggered on-demand indexing using IMAP server search, the emails are indexed using user1 as username key instead, as shown in maillog: dovecot: [ID 12345 mail.info] indexer-worker(user1): Indexed 1799 messages in INBOX Only the emails indexed using user1 can be searched, emails indexed using user1(a)example.com cannot be found. How can I configure autoindex to index email using user1 as username key? --- (Below is a follow-up question) In my mail server config, there are a few virtual mailbox users are using the following login information instead (different auth/password backend): login name: user2(a)virtmail.example.com email: user2(a)virtmail.example.com In this case, how can I distinguish user1(a)example.com and user2(a)virtmail.example.com, so that emails for user1(a)example.com can be indexed using user1 as username key, while user2(a)virtmail.example.com can be indexed using user2(a)virtmail.example.com as username key?

1 0

[Dovecot] FTS autoindex username problem
by lee_yiu_chung＠yahoo.com 11 Apr '14

11 Apr '14

I tried to set up Solr search server according to http://wiki2.dovecot.org/Plugins/FTS/Solr, and turned on autoindexing according to http://wiki2.dovecot.org/Plugins/FTS, but I found a strange behaviour that cause server search missing some emails. Here is the login information of my mail server: login name: user1 email: user1(a)example.com Now, when I turned on autoindexing, all autoindexed email are indexed using user1(a)example.com as username key, as shown in maillog: dovecot: [ID 12345 mail.info] indexer-worker(user1(a)example.com): Indexed 1 messages in INBOX But when I triggered on-demand indexing using IMAP server search, the emails are indexed using user1 as username key instead, as shown in maillog: dovecot: [ID 12345 mail.info] indexer-worker(user1): Indexed 1799 messages in INBOX Only the emails indexed using user1 can be searched, emails indexed using user1(a)example.com cannot be found. How can I configure autoindex to index email using user1 as username key? --- (Below is a follow-up question) In my mail server config, there are a few virtual mailbox users are using the following login information instead (different auth/password backend): login name: user2(a)virtmail.example.com email: user2(a)virtmail.example.com In this case, how can I distinguish user1(a)example.com and user2(a)virtmail.example.com, so that emails for user1(a)example.com can be indexed using user1 as username key, while user2(a)virtmail.example.com can be indexed using user2(a)virtmail.example.com as username key?

1 0

Re: [Dovecot] replication + attachment sis + zlib bug ? (HEAD version from xi.rename-it.nl)
by Pavel Stano 11 Apr '14

11 Apr '14

Yes, exactly. I look at the code and find out there is functionality for that. Dovecot store attachments in base64 format without decoding if there are longer lines with more base64 blocks (4chars). So these attachments get deduplicated but are not decoded. But it don't work if last line is buggy. I think i fixed it. It looks like it works, but i test only one mailbox. Patch attached On Fri, 11 Apr 2014 09:29:53 +0200 Gilles Chauvin <gilles.chauvin(a)univ-rouen.fr> wrote: > On 10/04/2014 18:21, Pavel Stano wrote: > > Hi, > > > > yes its the same problem. > > I can confirm that it is caused by last line in base64 > > attachment which is longer than 72 chars in original message. > > > > > > Hi, > > I don't know what is the current status for this issue since Timo > never responded to my two mails. A safe way to workaround this > problem could be Dovecot skipping deduplication when it encounters a > malformed base64 attachment ? > > > > Regards, > Gilles. -- [ Ohodnotte kvalitu mailu: http://nicereply.com/websupport/Stano/ ] Pavel Stano | Troubleshooter http://WebSupport.sk *** BERTE A VYCHUTNAVAJTE ***

1 0

[Dovecot] FTS autoindex problem
by lee_yiu_chung＠yahoo.com 11 Apr '14

11 Apr '14

I tried to implement a solr search server, but I found some unexpected behaviour when I turn on autoindex according to http://wiki2.dovecot.org/Plugins/FTS. I found that all autoindexed email are using "user1(a)example.com" as username, as shown in maillog: indexer-worker(user1(a)example.com): Indexed 1 messages in INBOX However, all manually indexed email (triggered by IMAP server search) are using "user1" as username, as shown in maillog: indexer-worker(user1): Indexed 2927 messages in INBOX. I am using "user1" as login name, so all autoindexed mails don't appear in search result. How can I use "user" as the username in autoindex? BTW, I do have a few mailboxes in the format user2(a)virtualmail.example.com, which requires full email address as the login name. How can I autoindex emails that automatically distinguishes user1(a)example.com (using "user1" as username) and user2(a)virtualmail.example.com (using "user2(a)virtualmail.example.com" as username) given that the previous question is solved?

1 0

[Dovecot] FTS autoindex problem
by lee_yiu_chung＠yahoo.com 11 Apr '14

11 Apr '14

I tried to implement a solr search server, but I found some unexpected behaviour when I turn on autoindex according to http://wiki2.dovecot.org/Plugins/FTS. I found that all autoindexed email are using "user1(a)example.com" as username, as shown in maillog: indexer-worker(user1(a)example.com): Indexed 1 messages in INBOX However, all manually indexed email (triggered by IMAP server search) are using "user1" as username, as shown in maillog: indexer-worker(user1): Indexed 2927 messages in INBOX. I am using "user1" as login name, so all autoindexed mails don't appear in search result. How can I use "user" as the username in autoindex? BTW, I do have a few mailboxes in the format user2(a)virtualmail.example.com, which requires full email address as the login name. How can I autoindex emails that automatically distinguishes user1(a)example.com (using "user1" as username) and user2(a)virtualmail.example.com (using "user2(a)virtualmail.example.com" as username) given that the previous question is solved?

1 0