- dovecot - dovecot.org

[Dovecot] 2.2.9
by Nick Edwards 26 Nov '13

26 Nov '13

Timo (since he is the only one that maters here), In past couple of days I have seen 4 people on IRC bitten by 2.2.8 and pigeonhole bug, none of them are on this list, so like all others who want to download and build them, are unaware of the patch, so, given how wide the userbase is with pigeonhole sieve and dovecot, this would or should be considered a serious bug, so my question is Timo, is it not best to immediately push 2.2.9, or should even more server administrators become frustrated and curse waiting two more months until you have a list you think is best putting out a new release, many of them dont like the constant new releases all the time with only minor things, but with a build failure, thats a serious issue.

15 27

Re: [Dovecot] 2.2.9
by Rick Romero 26 Nov '13

26 Nov '13

Noel, I include you in the gang of three, and I only read half the posts on this list. I have no specific reason to, but it isn't a good association. A decade ago I was active on the Pegasus mail and Mercury lists, and names stood out after a while. Unfortunately on this list, the names stand out for a completely different reason - and its not positive. Just chill, everyone. You never know who's going to interview you in a year. Rick

2 1

[Dovecot] postfix and dovecot - no emails in new folder
by Don Hill 26 Nov '13

26 Nov '13

Hi. I am working on setting up Dovecot v2.0.9 and postfix 2.6.6 on centos 6.4. I have postfix configured with dovecot using virtual users. Everything seems to be working with the exception of no emails being delivered to the Maildir/new folder. If I touch a file into that folder then the file gets delivered to the email client using imap. I can also send email from the client with no problems. In fact if I look at the logs postfix says the email was delivered to the mailbox. postfix/virtual[27270]: 8652F35C38A8: to=<user(a)domain.tld>, relay=virtual, delay=0.11, delays=0.1/0.01/0/0, dsn=2.0.0, status=sent (delivered to mailbox)$ Here is my dovecot -n output *doveconf: Warning: NOTE: You can get a new clean config file with: doveconf -n > dovecot-new.conf** **doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:85: protocol { ssl_listen } has been replaced by service { inet_listener { address } }** **# OS: Linux 2.6.32-042stab079.6 x86_64 CentOS release 6.4 (Final) reiserfs** **auth_mechanisms = plain login** **default_login_user = vmail** **first_valid_gid = 5000** **first_valid_uid = 5000** **listen = *** **mail_access_groups = vmail** **mail_location = maildir:/var/vmail/%d/%u/Maildir** **mbox_write_locks = fcntl** **passdb {** ** args = scheme=SHA1 /etc/dovecot/passwd** ** driver = passwd-file** **}** **protocols = imap pop3** **service auth {** ** unix_listener auth-client {** ** group = postfix** ** mode = 0660** ** user = postfix** ** }** ** user = root** **}** **service imap-login {** ** inet_listener imaps {** ** address = *** ** }** ** process_min_avail = 1** ** user = vmail** **}** **service pop3-login {** ** inet_listener pop3s {** ** address = *** ** }** **}** **ssl_cert = </etc/pki/dovecot/certs/dovecot.pem** **ssl_key = </etc/pki/dovecot/private/dovecot.pem** **userdb {** ** args = uid=5000 gid=5000 home=/var/vmail/%d/%u allow_all_users=yes** ** driver = static** **}* Any thoughts?

4 7

[Dovecot] Invitation to connect on LinkedIn
by Don Hill 26 Nov '13

26 Nov '13

LinkedIn ------------ I'd like to add you to my professional network on LinkedIn. - Don Don Hill Senior Technical Consultant at Lincoln Financial Group Greater Chicago Area Confirm that you know Don Hill: https://www.linkedin.com/e/458g9e-hogi596x-46/isd/18305189187/jxXw8l7X/?hs=… -- You are receiving Invitation to Connect emails. Click to unsubscribe: http://www.linkedin.com/e/458g9e-hogi596x-46/V7LnuFRIQXpYNGb2yum6IE4IQU3ZkP… (c) 2012 LinkedIn Corporation. 2029 Stierlin Ct, Mountain View, CA 94043, USA.

1 0

[Dovecot] error while compiling dovecot 2.2.9
by Luuk 25 Nov '13

25 Nov '13

while doing 'sudo make install', its complaining about the existance of ‘/usr/local/lib/dovecot/auth’ ..... make[3]: Entering directory `/home/luuk/source/dovecot-2.2.9/src/anvil' /usr/bin/mkdir -p '/usr/local/lib/dovecot' /bin/sh ../../libtool --mode=install /usr/bin/install -c anvil '/usr/local/lib/dovecot' libtool: install: /usr/bin/install -c .libs/anvil /usr/local/lib/dovecot/anvil make[3]: Nothing to be done for `install-data-am'. make[3]: Leaving directory `/home/luuk/source/dovecot-2.2.9/src/anvil' make[2]: Leaving directory `/home/luuk/source/dovecot-2.2.9/src/anvil' Making install in auth make[2]: Entering directory `/home/luuk/source/dovecot-2.2.9/src/auth' make[3]: Entering directory `/home/luuk/source/dovecot-2.2.9/src/auth' /usr/bin/mkdir -p '/usr/local/lib/dovecot' /bin/sh ../../libtool --mode=install /usr/bin/install -c auth checkpassword-reply '/usr/local/lib/dovecot' libtool: install: /usr/bin/install -c .libs/auth /usr/local/lib/dovecot/auth libtool: install: /usr/bin/install -c .libs/checkpassword-reply /usr/local/lib/dovecot/checkpassword-reply /usr/bin/mkdir -p '/usr/local/lib/dovecot/auth' /usr/bin/mkdir: cannot create directory ‘/usr/local/lib/dovecot/auth’: File exists make[3]: *** [install-auth_moduleLTLIBRARIES] Error 1 make[3]: Leaving directory `/home/luuk/source/dovecot-2.2.9/src/auth' make[2]: *** [install-am] Error 2 make[2]: Leaving directory `/home/luuk/source/dovecot-2.2.9/src/auth' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/home/luuk/source/dovecot-2.2.9/src' make: *** [install-recursive] Error 1 luuk@asus:~/source/dovecot-2.2.9> any tips on what i did wrong?

4 7

[Dovecot] Zlib plugin - when does it make sense?
by Frerich Raabe 25 Nov '13

25 Nov '13

Hi, I run a small IMAP server for a dozen guys in the office, serving about 55GB of Maildir. I recently became aware of the Zlib plugin ( http://wiki2.dovecot.org/Plugins/Zlib ) and wondered 1. given that there is about zero CPU load on my IMAP server, is enabling the plugin a no-brainer or are there other things (except CPU load) to consider? 2. For enabling the plugin, I suppose you compress all the existing mail just once and then add 'zlib' to mail_plugins in order to have all future incoming mail saved? Any insight by people familiar with the plugin would be much appreciated - thanks! -- Frerich Raabe - raabe(a)froglogic.com www.froglogic.com - Multi-Platform GUI Testing

4 5

[Dovecot] prohibit deletion of Junk folder
by Alexandre Ellert 25 Nov '13

25 Nov '13

Hi, I have an issue with a sieve_before rule (the script move incoming email to Junk folder when DMARC=fail and policy is quarantine) because one of my user delete his Junk folder : dovecot: lda(myuser(a)domain.com): Error: sieve: execution of script /etc/dovecot/sieve_before/01-dmarc-fail.sieve failed, but implicit keep was successful: 1 Time(s) dovecot: lda(myuser(a)domain.com): Error: sieve: msgid=<20131124212217.5F346580D49(a)anotherdomain.com>: failed to store into mailbox 'Junk': Mailbox doesn't exist: Junk: 1 Time(s) How can I do to prohibit the deletion of Junk folder by end users ? Tell me if you need 'dovecot -n' and thanks for your advices. Alexandre.

2 2

[Dovecot] Dovecot 2.2.7/2.2.8 failing to call dspam with antispam
by Guillaume Hilt 25 Nov '13

25 Nov '13

Hello again, I'm running Gentoo AMD64 2013 with postfix, mysql, dovecot and dspam : dovecot 2.2.8 (it was working fine with 2.2.6 after doing a chmod 4511 on dspam binary), dspam 3.10.2-r1 and dovecot-antispam-2.0_pre20130429 (recompiled after each dovecot upgrade). I've set dspam to debug, and mail_debug to yes. uid 1001 is user vmail (dovecot is running under vmail) gid 12 is group mail (vmail is a member, with mail,postfix,dspam,dovecot,apache) All the necessary users are trusted in dspam configuration. Here's my plugin settings : antispam_verbose_debug = 1 antispam_debug_target = syslog antispam_backend = dspam antispam_allow_append_to_spam = NO antispam_skip_from_line = NO antispam_spam = Spam antispam_trash = Trash antispam_signature = X-DSPAM-Signature antispam_signature_missing = error antispam_dspam_binary = /usr/bin/dspam antispam_dspam_args = --user;%u;--deliver=;--source=error;--signature=%%s antispam_dspam_spam = --class=spam antispam_dspam_notspam = --class=innocent antispam_dspam_result_header = X-DSPAM-Result When i'm moving an email to the dspam folder, Thunderbird throw me an error : Failed to call dspam (email is dropped in the Spam folder anyway, but a copy stay on my INBOX) ==> /var/log/mail/mail/log <== Nov 25 13:01:04 srv1 dovecot: imap: Debug: Loading modules from directory: /usr/lib64/dovecot Nov 25 13:01:04 srv1 dovecot: imap: Debug: Module loaded: /usr/lib64/dovecot/lib90_antispam_plugin.so Nov 25 13:01:04 srv1 dovecot: imap: Debug: Added userdb setting: plugin/maildir=shadowprojects.org/ghilt/ Nov 25 13:01:04 srv1 dovecot: imap(ghilt(a)shadowprojects.org): Debug: Effective uid=1001, gid=12, home=/home/vmail/shadowprojects.org/ghilt/ Nov 25 13:01:04 srv1 dovecot: imap(ghilt(a)shadowprojects.org): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/home/vmail/shadowprojects.org/ghilt/.maildir Nov 25 13:01:04 srv1 dovecot: imap(ghilt(a)shadowprojects.org): Debug: maildir++: root=/home/vmail/shadowprojects.org/ghilt/.maildir, index=, indexpvt=, control=, inbox=/home/vmail/shadowprojects.org/ghilt/.maildir, alt= Nov 25 13:01:04 srv1 dovecot: imap(ghilt(a)shadowprojects.org): Debug: Namespace : Using permissions from /home/vmail/shadowprojects.org/ghilt/.maildir: mode=0770 gid=default Nov 25 13:01:04 srv1 dovecot: imap(ghilt(a)shadowprojects.org): Debug: dspam error:29764 prefix=imap(ghilt(a)shadowprojects.org): Nov 25 13:01:04 srv1 dovecot: imap(ghilt(a)shadowprojects.org): Debug: executing /usr/bin/dspam failed: 13 (uid=1001, gid=12) Nov 25 13:01:04 srv1 dovecot: imap: Error: Nov 25 13:01:04 srv1 dovecot: imap: Error: ==> /var/log/dspam/dspam.debug <== 9976: [11/25/2013 13:12:23] DSPAM Instance Startup 9976: [11/25/2013 13:12:23] input args: /usr/bin/dspam --user ghilt(a)shadowprojects.org --deliver= --source=error --signature=89,52900600118151560172939 --class=spam 9976: [11/25/2013 13:12:23] pass-thru args: 9976: [11/25/2013 13:12:23] processing user ghilt(a)shadowprojects.org 9976: [11/25/2013 13:12:23] uid = 1001, euid = 0, gid = 12, egid = 12 9976: [11/25/2013 13:12:23] loading preferences for user ghilt(a)shadowprojects.org ... 9976: [11/25/2013 13:06:08] DSPAM Instance Shutdown. Exit Code: 99 9976: [11/25/2013 13:06:08] process_users() failed on error 9 If i try to call dspam like this, it works : sudo -u vmail /usr/bin/dspam --source=error --class=spam --signature=4be87a9f953248352114216 --client --user vmail Any idea ? Thanks, -- Guillaume Hilt

2 3

[Dovecot] Checkpassword interface for custom password check and home mounting
by Jouko Nikula 25 Nov '13

25 Nov '13

Hi, I'm trying to use the checkpassword interface to do a password check and if the check succeeds I mount the user home directory (including mail) using the users login password and uid. My password check seems to work, but when I add the home directory mounting things seem to stop. Dovecot never logs the result of the password check and nothing happens until the client gets bored and tries again. I added trace to the dovecot's checkpassword-reply and I see that it's really executed, it writes the reply and returns 0 for successful authentication. My dovecot version is 2.1.7. My checkpassword is a setuid binary and the mount is a self made fuse-fs. Any ideas what happens? Are there better ways to do this? Thanks, - Jouko

2 2

[Dovecot] Checkpassword interface for custom password check and home mounting
by Jouko Nikula 25 Nov '13

25 Nov '13

Hi, I'm trying to use the checkpassword interface to do a password check and if the check succeeds I mount the user home directory (including mail) using the users login password and uid. Things work well if I do the mount manually, but when I add the home directory mounting to checkpassword things seem to stop. Dovecot logs the result of the password check, but doesn't send the result to client. Here's the log: Nov 25 10:32:05 jlaptop dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Nov 25 10:32:05 jlaptop dovecot: auth: Debug: auth client connected (pid=27551) Nov 25 10:32:05 jlaptop dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=imap#011secured#011session=8HsMAvjrvgB/AAAB#011lip=127.0.0.1#011rip=127.0.0.1#011lport=143#011rport=39614 Nov 25 10:32:05 jlaptop dovecot: auth: Debug: client out: CONT#0111#011 Nov 25 10:32:05 jlaptop dovecot: auth: Debug: client in: CONT<hidden> Nov 25 10:32:05 jlaptop dovecot: auth: Debug: checkpassword(jouko.nikula,127.0.0.1,<8HsMAvjrvgB/AAAB>): execute: /usr/sbin/gpgfusemount /usr/lib/dovecot/checkpassword-reply Nov 25 10:32:05 jlaptop dovecot: auth: Debug: checkpassword(jouko.nikula,127.0.0.1,<8HsMAvjrvgB/AAAB>): exit_status=0 My dovecot version is 2.1.7. My checkpassword is a setuid binary and the mount is a self made fuse-fs. Any ideas what happens? Are there better ways to do this? Thanks, - Jouko

1 0