October 2017 - dovecot

fts-solr: fresh start or reindex large mailboxes
by Anton Borovoy 26 Oct '17

26 Oct '17

Hi, Install solr (in the end 7.1.0) there were errors: Caused by: org.eclipse.jetty.io.EofException: Early EOF and from dovecot: Error: Mailbox INBOX: Transaction commit failed: FTS transaction commit failed: backend I could not find for a long time what the problem was and set the nginx as a proxy, and see that dovecot breaks the connect after 60 seconds. After examining the code, I found the fixed connection time: http_set.request_timeout_msecs = 60 * 1000; which is clearly not enough for large data. After searching, he also found this post https://dovecot.org/pipermail/dovecot-cvs/2015-March/025551.html 1. I think it would be a good idea to remove these settings in the configuration file dovecot.conf A bit of statistics from nginx, solr and nginx on same server (req_len == post body): 60 seconds, requests do not pass: [25 / Oct / 2017: 23: 07: 11 +0700] POST / solr / dovecot / update HTTP / 1.1 resp_time - msec 1508947631.364 req_time 86.863 req_len 171401961 499 [25 / Oct / 2017: 23: 07: 25 +0700] POST / solr / dovecot / update HTTP / 1.1 resp_time - msec 1508947645.149 req_time 74.657 req_len 70140598 499 [25 / Oct / 2017: 23: 11: 28 +0700] POST / solr / dovecot / update HTTP / 1.1 resp_time - msec 1508947888.834 req_time 90.776 req_len 205474676 499 600 seconds, requests do not pass: [26 / Oct / 2017: 04: 50: 50 +0700] POST / solr / dovecot / update HTTP / 1.1 resp_time - msec 1508968250.522 req_time 811.480 req_len 3083215798 499 [26 / Oct / 2017: 04: 51: 06 +0700] POST / solr / dovecot / update HTTP / 1.1 resp_time - msec 1508968266.432 req_time 666.089 req_len 556157906 499 [26 / Oct / 2017: 05: 06: 18 +0700] POST / solr / dovecot / update HTTP / 1.1 resp_time - msec 1508969178.612 req_time 797.983 req_len 3083215798 499 2. the index is more than 3g is transmitted painfully, can U make a queue limit on the size of the request, segment them, adjust max size of post body in the configuration file dovecot.conf thx solr: 7.1.0 dovecot: 2.2.32 server: Intel(R) Xeon(TM) CPU 2.93GHz x24, 72G RAM

1 0

authenticate as userA, but get authorization to user userB's account
by Heiko Schlittermann 26 Oct '17

26 Oct '17

Hello, given a small organization. There are *personal* mailboxes (mailbox per user, incl. subfolders et cetera). The users can share specic folders via the ACL (we call it "other users/", Dovecot calls it "shared" folder. Additionally there are mailboxes Dovecot calls "public" (we use the term "groups/"). They are not associated with a specific account, but acessible via ACL only. (Good example for the latter is "info(a)example.com") But now they're seeking for a way to implement "role" Accounts. We could create new "role" users, share the password and create an additional account within the mail client (thunderbird) they use. From users perspective it is exactly what they want. But I dislike the idea of sharing the password. Question: Is there any way to split the authentication from the authorization within common mail clients (as Thunderbird) in combination with Dovecot. That is, doing something like logging in to the account sales(a)example.com, using the credentials of the very own account (say hans(a)example.com)? - how to do it in Dovecot? (We use LDAP) - how to set up this in Thunderbird? - how to set up this in a generic MUA, as some webmail client? Thanks in advance, best regards from Dresden/Germany Heiko Schlittermann -- SCHLITTERMANN.de ---------------------------- internet & unix support - Heiko Schlittermann, Dipl.-Ing. (TU) - {fon,fax}: +49.351.802998{1,3} - gnupg encrypted messages are welcome --------------- key ID: F69376CE - ! key id 7CBF764A and 972EAC9F are revoked since 2015-01 ------------ -

5 9

Re: STAT command failure
by Joseph Tam 25 Oct '17

25 Oct '17

Andrew Charnley <ac(a)igaro.com> writes: >> It's also telling that it works for some accounts, and not for others. >> Try rebuilding the user's index cache by removing it (save a copy!) >> and see if that makes it work. If it does, you can send the buggy >> caches to the developer and see if they can figure it out. > > Which user index file to you refer to? If you're using INDEX= in your mail_location, that one. I think it suffices to remove the indices for the user's INBOX, since that's the only mailbox POP3 is aware of. I'm not sure where the default index location is if you don't specify INDEX, so maybe look in your mail spool or personal mail folder for $WHATEVER/.imap/INBOX. Caches are regenerated if they go missing (unless you use mdbox/sdbox formats: *don't* do this if you're using them.) Joseph Tam <jtam.home(a)gmail.com>

1 0

Replication Issue
by Jorge Canto E. 25 Oct '17

25 Oct '17

Hello, I've been trying to set up replication, Server A is dovecot 2.2.32 (upgrade from 2.0.9) and Server B is dovecot 2.2.10, I use mysql as userdb, I don't want to replicate every user on my database only especific users so I set my iterate_query on dovecot-sql.conf.ext file; my problem: doveadm replication is not "reading" my iterate_query, it tries to replicate every user. Diagnosis: - I removed iterate_query from dovecot-sql.conf.ext, on the log file I can see the doveadm replication is still trying to replicate. - doveadm user '*' shows error (obvious) there is not iterate_query but, on the log files I can see replication is trying, why doveadm replication is trying to replicate? what userdb is reading from? doveconf -n # 2.2.32 (dfbe293d4): /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-696.1.1.el6.x86_64 x86_64 CentOS release 6.9 (Final) ext3 auth_debug = yes auth_socket_path = /var/run/dovecot/auth-userdb doveadm_password = # hidden, use -P to show it first_valid_uid = 150 last_valid_uid = 150 mail_debug = yes mail_location = maildir:/var/vmail/%d/%n mail_plugins = notify replication mail_privileged_group = mail mbox_write_locks = fcntl passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { mail_replica = tcp:x.x.x.x:61800 } postmaster_address = postmaster(a)email.com service aggregator { fifo_listener replication-notify-fifo { mode = 0666 user = vmail } unix_listener replication-notify { mode = 0666 user = vmail } } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 user = postfix } unix_listener auth-userdb { group = mail mode = 0600 user = vmail } } service config { unix_listener config { user = vmail } } service doveadm { inet_listener { port = 61800 } user = vmail } service replicator { process_min_avail = 1 unix_listener replicator-doveadm { mode = 0666 } } ssl = required ssl_cert = </etc/pki/tls/certs/mailnew.crt ssl_key = # hidden, use -P to show it userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } I really appreciate your help Jorge C.

1 0

Disconnected: Inactivity (no auth attempts in 180 secs)
by Alexandre 25 Oct '17

25 Oct '17

Hi, I hope you guys can understand me since english is not my nativelanguage. I am trying setup dovecot for imap and pop3 on FreeBSD 10.3 and is notworking on IMAPS or POP3S, currently My setup is: OS = FreeBSD 10.3 ( I did not get enough time for update to 11) Postfix = 3.2.3 Dovecot = 2.2.33.2 (d6601f4ec) OpenSSL =1.0.1s-freebsd SSL Certificate = Let's Encrypt I can send and receive mails using: IMAP 143 with TLS SMTP 587 with TLS Usually on Linux distros works pretty easy, when I don't forgetsomething this should be working on first try, but, after spend 2 weeks workingon it after arrive from job without found any solution, I am trying the luckasking for help from your guys expert on dovecot. The hangup occours inside of my LAN using Outlook 2016, and Outside also trying access on 4G from my Android smartphone. My goal is enable also POP3s and IMAPs using TLS. This is my data: Dovecot –n: #2.2.33.2 (d6601f4ec): /usr/local/etc/dovecot/dovecot.conf # Pigeonhole version 0.4.21 (92477967) # OS: FreeBSD 10.3-RELEASE-p22 amd64 zfs auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login auth_verbose = yes auth_verbose_passwords = yes hostname = mail.mydomain.com imap_client_workarounds = delay-newmail tb-extra-mailbox-septb-lsub-flags lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lda_original_recipient_header = X-Original-To mail_attachment_fs = sis-queue posix mail_attachment_hash = %{sha512} mail_debug = yes mail_location = maildir:/usr/local/vmail/%d/%n:LAYOUT=fs mail_plugins = quota acl mail_privileged_group = vmail mailbox_list_index = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelopeencoded-character vacation subaddress comparator-i;ascii-numeric relationalregex imap4flags copy include variables body enotify environment mailbox dateindex ihave duplicate mime foreverypart extracttext mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Archives { auto = subscribe special_use = \Archive } mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "SentMessages" { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } mailbox virtual/All { auto = subscribe comment = All my messages special_use = \All } mailbox virtual/Flagged { auto = subscribe comment = All my flaggedmessages special_use = \Flagged } prefix = } passdb { args =/usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { acl = vfile quota = maildir:User quota quota_max_mail_size = 100M quota_rule = *:storage=1G quota_rule2 =Archive:storage=+1G quota_rule3 =Trash:storage=+100M quota_warning = storage=80%%quota-warning 80 %u sieve =/usr/local/vmail/%d/%n/.dovecot.sieve sieve_before =/usr/local/vmail/sieve/before.d/ sieve_dir = /usr/local/vmail/%d/%n sieve_global_dir =/usr/local/vmail/sieve/%d sieve_global_path =/usr/local/vmail/sieve/%d/default.sieve } pop3_client_workarounds = outlook-no-nuls oe-ns-eoh postmaster_address = postmaster(a)mydomain.com protocols = imap pop3 lmtp sieve quota_full_tempfail = yes service auth-worker { user = vmail } service auth { unix_listener/var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } } service dict { unix_listener dict { mode = 0600 user = vmail } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_min_avail = 2 } service lmtp { unix_listener/var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } process_min_avail = 0 service_count = 1 vsz_limit = 64 M } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service quota-warning { executable = script/usr/local/bin/quota-warning.sh unix_listener quota-warning { user = vmail } user = dovecot } ssl = required ssl_ca = </etc/ssl/cert.pem ssl_cert = </usr/local/etc/dovecot/private/mail.mydomain.com.crt ssl_cipher_list =ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA ssl_dh_parameters_length = 4096 ssl_key = # hidden, use -P toshow it ssl_options = no_compression ssl_parameters_regenerate = 6 hours ssl_prefer_server_ciphers = yes ssl_protocols = TLSv1.2 userdb { driver = prefetch } verbose_ssl = yes protocollda { mail_plugins = quota acl sieve postmaster_address = root } protocol lmtp { deliver_log_format = msgid=%m:%s mail_plugins = quota acl sieve postmaster_address =postmaster(a)mydomain.com } protocol sieve { managesieve_implementation_string = Dovecot Pigeonhole managesieve_max_compile_errors =5 managesieve_max_line_length =65536 } protocolpop3 { mail_plugins = quota } protocolimap { mail_plugins = quota acl imap_quota imap_acl } Dovecot-sql driver = mysql connect = host=127.0.0.1 dbname=mailserver user=mail password=***** default_pass_scheme = SHA512-CRYPT user_query = \ SELECT \ email asuser, \ maildir ashome, \ uid, \ gid, \ CONCAT('*:storage=',quota, 'B') AS quota_rule, \ CONCAT(maildir,'./sieve')as sieve \ FROM \ virtual_users\ WHERE \ email ='%u' \ AND \ active= '1' password_query = \ SELECT \ email asuser, \ password, \ maildir asuserdb_home, \ uid asuserdb_uid, \ gid asuserdb_gid, \ CONCAT('*:storage=',quota, 'B') AS userdb_quota_rule, \ CONCAT(maildir,'./sieve')as userdb_sieve \ FROM \ virtual_users\ WHERE \ email ='%u' \ AND \ active= '1' iterate_query = \ SELECT \ email ASuser \ FROM \ virtual_users\ WHERE \ active ='1' maillog with Disconnected: Inactivity (no auth attempts in 180 secs) Oct 25 06:46:38 mail dovecot: imap-login: Debug: SSL: where=0x10, ret=1:before/accept initialization [192.168.0.95] Oct 25 06:46:38 mail dovecot: imap-login: Debug: SSL: where=0x2001,ret=1: before/accept initialization [192.168.0.95] Oct 25 06:46:38 mail dovecot: imap-login: Debug: SSL: where=0x2002,ret=-1: SSLv2/v3 read client hello A [192.168.0.95] Oct 25 06:46:38 mail dovecot: auth: Debug: auth client connected(pid=9371) Oct 25 06:49:38 mail dovecot: imap-login: Disconnected: Inactivity (noauth attempts in 180 secs): user=<>, rip=192.168.0.95, lip=10.0.0.32, TLShandshaking, session=<+XXXXXXXXXXXXXf> Oct 25 06:49:38 mail postfix/submission/smtpd[9400]: connect fromunknown[192.168.0.95]:50860 Oct 25 06:49:38 mail postfix/submission/smtpd[9400]: Anonymous TLSconnection established from unknown[192.168.0.95]:50860: TLSv1.2 with cipherECDHE-RSA-AES256-SHA384 (256/256 bits) Oct 25 06:49:38 mail dovecot: auth: Debug: auth client connected (pid=0) Oct 25 06:49:38 mail dovecot: auth: Debug: client in: AUTH 1 LOGIN service=smtp nologin lip=10.0.0.32 rip=192.168.0.95 secured Oct 25 06:49:38 mail dovecot: auth: Debug: client passdb out: CONT 1 VXXXXXXXXXX6 Oct 25 06:49:38 mail dovecot: auth: Debug: client in: CONT 1 cXXXXXXXXXXXXXXXXXXXXXXXXXXt(previous base64 data may contain sensitive data) Oct 25 06:49:38 mail dovecot: auth: Debug: client passdb out: CONT 1 UXXXXXXXXXX6 Oct 25 06:49:38 mail dovecot: auth: Debug: client in: CONT 1 dXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX=(previous base64 data may contain sensitive data) Oct 25 06:49:38 mail dovecot: auth-worker(9402): Debug: Loading modulesfrom directory: /usr/local/lib/dovecot/auth Oct 25 06:49:38 mail dovecot: auth-worker(9402): Debug: Module loaded:/usr/local/lib/dovecot/auth/lib20_auth_var_expand_crypt.so Oct 25 06:49:39 mail dovecot: auth-worker(9402): Debug:sql(test@domain.com,192.168.0.95): query: SELECT email as user, password,maildir as userdb_home, uid as userdb_uid, gid as userdb_gid,CONCAT('*:storage=', quota, 'B') AS userdb_quota_rule,CONCAT(maildir,'./sieve') as userdb_sieve FROM virtual_users WHERE email ='test(a)domain.com' AND active = '1' Oct 25 06:49:39 mail dovecot: auth: Debug: client passdb out: OK 1 user=test(a)domain.com Oct 25 06:49:39 mail postfix/submission/smtpd[9400]: 3XXXXXXXXXXXt:client=unknown[192.168.0.95]:50860, sasl_method=LOGIN,sasl_username=test(a)domain.com Oct 25 06:49:39 mail postfix/cleanup[9404]: 3XXXXXXXXXXXt:message-id=<3XXXXXXXXXXXt(a)mail.domain.com> Oct 25 06:49:39 mail opendkim[945]: 3XXXXXXXXXXXt: DKIM-Signature fieldadded (s=201710, d=domain.com) Oct 25 06:49:39 mail postfix/qmgr[8504]: 3XXXXXXXXXXXt:from=<test(a)domain.com>, size=1446, nrcpt=1 (queue active) Oct 25 06:49:39 mail postfix/submission/smtpd[9400]: disconnect fromunknown[192.168.0.95]:50860 ehlo=2 starttls=1 auth=1 mail=1 rcpt=1 data=1commands=7 Oct 25 06:49:49 mail postfix/smtpd[9408]: connect from localhost[127.0.0.1]:23696 Oct 25 06:49:49 mail opendmarc[949]: ignoring connection from localhost Oct 25 06:49:49 mail postfix/smtpd[9408]: 3YYYYYYYYYYY1:client=localhost[127.0.0.1]:23696 Oct 25 06:49:49 mail postfix/cleanup[9404]: 3YYYYYYYYYYY1:message-id=<3XXXXXXXXXXXt(a)mail.domain.com> Oct 25 06:49:49 mail opendkim[945]: 3YYYYYYYYYYY1: DKIM-Signature fieldadded (s=201710, d=domain.com) Oct 25 06:49:49 mail postfix/qmgr[8504]: 3YYYYYYYYYYY1:from=<test(a)domain.com>, size=2918, nrcpt=1 (queue active) Oct 25 06:49:49 mail postfix/smtpd[9408]: disconnect fromlocalhost[127.0.0.1]:23696 ehlo=1 mail=1 rcpt=1 data=1 quit=1 commands=5 Oct 25 06:49:49 mail amavis[913]: (00913-03) Passed CLEAN {RelayedInternal},MYNETS LOCAL [192.168.0.95]:50860 <test(a)domain.com> -><test(a)domain.com>, Queue-ID: 3XXXXXXXXXXXt, Message-ID:<3XXXXXXXXXXXt(a)mail.domain.com>, mail_id: SuyWDTSHlDWx, Hits: -1.099,size: 2315, queued_as: 3YYYYYYYYYYY1, dkim_sd=201710:domain.com, 9815 ms Oct 25 06:49:49 mail postfix/lmtp[9405]: 3XXXXXXXXXXXt:to=<test(a)domain.com>, relay=127.0.0.1[127.0.0.1]:10024, delay=10,delays=0.3/0.03/0.01/9.8, dsn=2.0.0, status=sent (250 2.0.0 fromMTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as 3YYYYYYYYYYY1) Oct 25 06:49:49 mail postfix/lmtp[9409]: warning: smtp_connect_local:opportunistic TLS encryption is not appropriate for unix-domain destinations. Oct 25 06:49:49 mail postfix/qmgr[8504]: 3XXXXXXXXXXXt: removed Oct 25 06:49:49 mail dovecot: lmtp(9410): Debug: none: root=, index=,indexpvt=, control=, inbox=, alt= Oct 25 06:49:49 mail dovecot: lmtp(9410): Connect from local Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug: Loadingmodules from directory: /usr/local/lib/dovecot Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug: Moduleloaded: /usr/local/lib/dovecot/lib01_acl_plugin.so Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug: Moduleloaded: /usr/local/lib/dovecot/lib10_quota_plugin.so Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug: Moduleloaded: /usr/local/lib/dovecot/lib90_sieve_plugin.so Oct 25 06:49:49 mail dovecot: auth: Debug: master in: USER 1 test(a)domain.com service=lmtp Oct 25 06:49:49 mail dovecot: auth: Debug: prefetch(test(a)domain.com): passdbdidn't return userdb entries, trying the next userdb Oct 25 06:49:49 mail dovecot: auth-worker(9402): Debug:sql(test@domain.com): SELECT email as user, maildir as home, uid, gid,CONCAT('*:storage=', quota, 'B') AS quota_rule, CONCAT(maildir,'./sieve') assieve FROM virtual_users WHERE email = 'test(a)domain.com' AND active = '1' Oct 25 06:49:49 mail dovecot: auth: Debug: userdb out: USER 1 test(a)domain.com home=/usr/local/vmail/domain.com/security uid=5000 gid=5000 quota_rule=*:storage=100000000B sieve=/usr/local/vmail/domain.com/security./sieve Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug: auth USERinput: test(a)domain.com home=/usr/local/vmail/domain.com/security uid=5000gid=5000 quota_rule=*:storage=100000000B sieve=/usr/local/vmail/domain.com/security./sieve Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug: Added userdbsetting: plugin/quota_rule=*:storage=100000000B Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug: Added userdbsetting: plugin/sieve=/usr/local/vmail/domain.com/security./sieve Oct 25 06:49:49 mail dovecot: lmtp(9410, test(a)domain.com) Debug:Effective uid=5000, gid=5000, home=/usr/local/vmail/domain.com/security Oct 25 06:49:49 mail dovecot: lmtp(9410, test(a)domain.com) Debug: acl:No acl_shared_dict setting - shared mailbox listing is disabled Oct 25 06:49:49 mail dovecot: lmtp(9410, test(a)domain.com) Debug: Quotaroot: name=User quota backend=maildir args= Oct 25 06:49:49 mail dovecot: lmtp(9410, test(a)domain.com) Debug: Quotarule: root=User quota mailbox=* bytes=100000000 messages=0 Oct 25 06:49:49 mail dovecot: lmtp(9410, test(a)domain.com) Debug: Quotarule: root=User quota mailbox=Archive bytes=+1073741824 messages=0 Oct 25 06:49:49 mail dovecot: lmtp(9410, test(a)domain.com) Debug: Quotarule: root=User quota mailbox=Trash bytes=+104857600 messages=0 Oct 25 06:49:49 mail dovecot: lmtp(9410, test(a)domain.com) Debug: Quotawarning: bytes=80000000 (80%) messages=0 reverse=no command=quota-warning 80test(a)domain.com Oct 25 06:49:49 mail dovecot: lmtp(9410, test(a)domain.com) Debug: Quotagrace: root=User quota bytes=10000000 (10%) Oct 25 06:49:49 mail dovecot: lmtp(9410, test(a)domain.com) Debug:Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes,subscriptions=yeslocation=maildir:/usr/local/vmail/domain.com/secu… Oct 25 06:49:49 mail dovecot: lmtp(9410, test(a)domain.com) Debug: fs:root=/usr/local/vmail/domain.com/security, index=, indexpvt=, control=,inbox=/usr/local/vmail/domain.com/security, alt= Oct 25 06:49:49 mail dovecot: lmtp(9410, test(a)domain.com) Debug: acl:initializing backend with data: vfile Oct 25 06:49:49 mail dovecot: lmtp(9410, test(a)domain.com) Debug: acl:acl username = test(a)domain.com Oct 25 06:49:49 mail dovecot: lmtp(9410, test(a)domain.com) Debug: acl:owner = 1 Oct 25 06:49:49 mail dovecot: lmtp(9410, test(a)domain.com) Debug: aclvfile: Global ACLs disabled Oct 25 06:49:49 mail dovecot: lmtp(9410, test(a)domain.com) Debug: quota:quota_over_flag check: quota_over_script unset - skipping Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug: Mailbox<lmtp DATA>: Opened mail UID=1 because: header X-Original-To (Cache fileis unusable) Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug: sieve:Pigeonhole version 0.4.21 (92477967) initializing Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug: 4ZZZZZZZZZZZZZZZZZZZZQ:sieve: file storage: Failed to normalize active script directory(path=/usr/local/vmail/domain.com/security.): Part of the path does not exist(yet) Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug:4ZZZZZZZZZZZZZZZZZZZZQ: sieve: file storage: Using active Sieve script path:/usr/local/vmail/domain.com/security./sieve Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug:4ZZZZZZZZZZZZZZZZZZZZQ: sieve: file storage: Using script storage path:/usr/local/vmail/domain.com/security Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug:4ZZZZZZZZZZZZZZZZZZZZQ: sieve: file storage: Relative path to sieve storage inactive link: /usr/local/vmail/domain.com/security/ Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug: 4ZZZZZZZZZZZZZZZZZZZZQ:sieve: file storage: Failed to normalize active script directory(path=/usr/local/vmail/domain.com/security.): Part of the path does not exist(yet) Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug:4ZZZZZZZZZZZZZZZZZZZZQ: sieve: file storage: Using Sieve script path:/usr/local/vmail/domain.com/security./sieve Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug:4ZZZZZZZZZZZZZZZZZZZZQ: sieve: file storage: Storage path`/usr/local/vmail/domain.com/security./sieve' not found Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug:4ZZZZZZZZZZZZZZZZZZZZQ: sieve: file storage: Storage path`/usr/local/vmail/sieve/domain.com/default.sieve' not found Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug:4ZZZZZZZZZZZZZZZZZZZZQ: sieve: User has no active script in storage`/usr/local/vmail/domain.com/security' Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug:4ZZZZZZZZZZZZZZZZZZZZQ: sieve: User has no personal script Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug:4ZZZZZZZZZZZZZZZZZZZZQ: sieve: file storage: Storage path`/usr/local/vmail/sieve/before.d/' not found Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug:4ZZZZZZZZZZZZZZZZZZZZQ: sieve: Location for sieve_before not found: /usr/local/vmail/sieve/before.d/ Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug:4ZZZZZZZZZZZZZZZZZZZZQ: sieve: No scripts to execute: reverting to defaultdelivery. Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug: INBOX:Mailbox opened because: lib-lda delivery Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug: Mailbox<lmtp DATA>: Opened mail UID=1 because: copying Oct 25 06:49:49 mail dovecot: lmtp(test(a)domain.com): Debug: acl vfile:file /usr/local/vmail/domain.com/security/dovecot-acl not found Oct 25 06:49:49 mail dovecot: lmtp(test@domain.com):msgid=<3XXXXXXXXXXXt(a)mail.domain.com>: Microsoft Outlook Test Message Oct 25 06:49:49 mail postfix/lmtp[9409]: 3YYYYYYYYYYY1:to=<test(a)domain.com>, relay=mail.domain.com[private/dovecot-lmtp],delay=0.48, delays=0.26/0.03/0.13/0.06, dsn=2.0.0, status=sent (250 2.0.0<test(a)domain.com> 4ZZZZZZZZZZZZZZZZZZZZQ Saved) Oct 25 06:49:49 mail dovecot: lmtp(9410): Disconnect from local:Successful quit Oct 25 06:49:49 mail postfix/qmgr[8504]: 3YYYYYYYYYYY1: removed Testing from another computer with openssl s_client -host 10.0.0.32 -port 993 -verify –debug verify depth is 0 CONNECTED(00000003) depth=2 O = Digital Signature Trust Co., CN = DST Root CA X3 verify return:1 depth=1 C = US, O = Let's Encrypt, CN = Let's Encrypt Authority X3 verify return:1 depth=0 CN = domain.com verify return:1 --- Certificate chain 0 s:/CN=domain.com i:/C=US/O=Let'sEncrypt/CN=Let's Encrypt Authority X3 1 s:/C=US/O=Let's Encrypt/CN=Let'sEncrypt Authority X3 i:/O=Digital Signature TrustCo./CN=DST Root CA X3 --- Server certificate -----BEGIN CERTIFICATE----- MIIGDjCCBPagAwIBAgISA71fShBIzBs0jj8E7L/XmHyjMA0GCSqGSIb3DQEBCwUA BzzGusiZmPR/KpKnHmRXThgo -----END CERTIFICATE----- subject=/CN=domain.com issuer=/C=US/O=Let's Encrypt/CN=Let's Encrypt Authority X3 --- No client certificate CA names sent Peer signing digest: SHA512 Server Temp Key: ECDH, P-256, 256 bits --- SSL handshake has read 3702 bytes and written 457 bytes --- New, TLSv1/SSLv3, Cipher is ECDHE-RSA-AES256-SHA384 Server public key is 4096 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE No ALPN negotiated SSL-Session: Protocol : TLSv1.2 Cipher : ECDHE-RSA-AES256-SHA384 Session-ID:548A93EA5A644C15EBA4B8335274B3091D33DD8C1741292BA4C0650E7171EF9F Session-ID-ctx: Master-Key:3DA8713979CA918E62C6E2DDB24F25050545390A031AAEEF82208300911D13C1B850FD78771F2046CAF0484F64A9C7A2 Key-Arg : None PSK identity: None PSK identity hint: None SRP username: None TLS session ticket lifetimehint: 300 (seconds) TLS session ticket: 0000 - 63 99 b8 dc b6 5a ca49-4c 35 62 47 95 a6 59 7e c....Z.IL5bG..Y~ 0010 - 2b 6e 64 a6 bf 06 fd a1-85 e5 6d f8 79 4b 762c +nd.......m.yKv, 0020 - 26 12 c9 8d cd da da 6c-5e 1e 4e 6963 30 b7 90 &......l^.Nic0.. 0030 - 45 ce 70 b5 14 01 ba60-d9 85 df f9 a7 66 1d 58 E.p....`.....f.X 0040 - 0d 36 f3 41 29 0b 43 f6-60 c1 0a 5e 2d db b438 .6.A).C.`..^-..8 0050- 31 0b 8e 05 e4 5f f7 30-d6 4f 34 10 3f 4f a6 e2 1...._.0.O4.?O.. 0060 - 17 d3 36 34 14 5a 3a 91-99 25 96 4f5c 82 d8 f0 ..64.Z:..%.O\... 0070 - ee 82 ef eb 77 ad c1 37-9a 6d 60 796f a3 1f 2e ....w..7.m`yo... 0080 - 0c 5a 40 bc 02 de 92 ff-cf 37 e1 df95 41 30 8c .Z@......7...A0. 0090 - 1d 3d e1 cd 1b 3f 78d4-86 d1 ac ad 3a 23 16 85 .=...?x.....:#.. Start Time: 1508923307 Timeout : 300 (sec) Verify return code: 0 (ok) --- * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLEIDLE AUTH=PLAIN AUTH=LOGIN] Dovecot ready. a login test(a)domain.com XXXXXXXXXXXXXXXXXXXXXXXX a OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLEIDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECTMULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUSLIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHINCONTEXT=SEARCH LIST-STATUS BINARY MOVE NOTIFY QUOTA ACL RIGHTS=texk] Logged in a select inbox * FLAGS (\Answered \Flagged \Deleted \Seen \Draft $Forwarded) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft$Forwarded \*)] Flags permitted. * 9 EXISTS * 0 RECENT * OK [UNSEEN 6] First unseen. * OK [UIDVALIDITY 1508179896] UIDs valid * OK [UIDNEXT 62] Predicted next UID a OK [READ-WRITE] Select completed (0.003 + 0.000 + 0.002 secs). a logout * BYE Logging out a OK Logout completed (0.002 + 0.000 + 0.001 secs). closed I have removed the certificate and sensitive data. I am out of ideas what else to config to get this working, and wannathank in advice for everyone who can try help me. Regards, PS.: I am going to work now, and as soon as possible, I can test anyadvice and report the results. Alexandre

1 0

Re: Password encription
by Aki Tuomi 25 Oct '17

25 Oct '17

CRAM-MD5 should not be used. Its not terribly secure. ---Aki TuomiDovecot oy -------- Original message --------From: "j.emerlik" <j.emerlik(a)gmail.com> Date: 25/10/2017 11:58 (GMT+02:00) To: Aki Tuomi <aki.tuomi(a)dovecot.fi> Cc: Dovecot Mailing List <dovecot(a)dovecot.org> Subject: Re: Password encription Thx Aki, with CRAP-MD5 as scheme and mechanism it's works corretlly. 2017-10-25 10:52 GMT+02:00 Aki Tuomi <aki.tuomi(a)dovecot.fi>: > PLAIN and LOGIN. > > > > --- > Aki Tuomi > Dovecot oy > > -------- Original message -------- > From: "j.emerlik" <j.emerlik(a)gmail.com> > Date: 25/10/2017 11:41 (GMT+02:00) > To: Dovecot Mailing List <dovecot(a)dovecot.org> > Subject: Password encription > > Hi, > which authentication mechanism should I use for SHA-256 password schama ? > Regards, > Jack >

2 1

Re: Password encription
by j.emerlik 25 Oct '17

25 Oct '17

Thx Aki, with CRAP-MD5 as scheme and mechanism it's works corretlly. 2017-10-25 10:52 GMT+02:00 Aki Tuomi <aki.tuomi(a)dovecot.fi>: > PLAIN and LOGIN. > > > > --- > Aki Tuomi > Dovecot oy > > -------- Original message -------- > From: "j.emerlik" <j.emerlik(a)gmail.com> > Date: 25/10/2017 11:41 (GMT+02:00) > To: Dovecot Mailing List <dovecot(a)dovecot.org> > Subject: Password encription > > Hi, > which authentication mechanism should I use for SHA-256 password schama ? > Regards, > Jack >

1 0

Re: Password encription
by Aki Tuomi 25 Oct '17

25 Oct '17

PLAIN and LOGIN. ---Aki TuomiDovecot oy -------- Original message --------From: "j.emerlik" <j.emerlik(a)gmail.com> Date: 25/10/2017 11:41 (GMT+02:00) To: Dovecot Mailing List <dovecot(a)dovecot.org> Subject: Password encription Hi, which authentication mechanism should I use for SHA-256 password schama ? Regards, Jack

1 0

Password encription
by j.emerlik 25 Oct '17

25 Oct '17

Hi, which authentication mechanism should I use for SHA-256 password schama ? Regards, Jack

1 0

Re: STAT command failure
by Joseph Tam 25 Oct '17

25 Oct '17

Andrew Charnley <ac(a)igaro.com> writes: >>> Regarding STAT which appears to have an issue with Dovecot:- >>> >>> [23:50:46] POP< +OK Dovecot ready. >>> [23:50:46] POP> USER xxxxx >>> [23:50:46] POP< +OK >>> [23:50:46] POP> PASS ******** >>> [23:50:46] POP< +OK Logged in. >>> [23:50:46] POP> STAT >>> [23:50:46] POP< -ERR Unknown command: >> >> user xxxxx >> pass *** >> stat > > I can confirm this works. > 2. Likely an issue with CLAWS email. If you can arrange a network capture of a non-SSL remote CLAWS connection, try checking whether there's a hidden character (NULL, .etc.) being sent. It's also telling that it works for some accounts, and not for others. Try rebuilding the user's index cache by removing it (save a copy!) and see if that makes it work. If it does, you can send the buggy caches to the developer and see if they can figure it out. Joseph Tam <jtam.home(a)gmail.com>

2 1