August 2018 - dovecot

Automatically subscribe to the INBOX folder
by glts 26 May '19

26 May '19

Hello, I am using the ‘auto = subscribe’ feature in the mailbox configuration section in the usual fashion (as shown in conf.d/15-mailboxes.conf): namespace inbox { inbox = yes mailbox Drafts { special_use = \Drafts auto = subscribe } ... } When I connect to an account with the Thunderbird mail client, those mailboxes/folders get autocreated and autosubscribed. Good! INBOX, however, does not get subscribed to automatically. When I look at the account’s subscriptions in Thunderbird, all folders are subscribed, except INBOX. How can I enable autosubscribe for the INBOX folder (like the other folders)? Is there an option for this? This is in Dovecot 2.2.22. Cheers, David

2 1

[Dovecot] Dovecot LDA/LMTP vs postfix virtual delivery agent and the x-original-to header
by Charles Marcus 19 Apr '19

19 Apr '19

On 2012-04-05 4:18 AM, Thomas Leuxner <tlx(a)leuxner.net> wrote: > Also with 2.x you may want to use LMTP rather than the LDA Piping. > > http://wiki2.dovecot.org/HowTo/PostfixDovecotLMTP I am preparing to convert my main client's postfix_courier-imap setup to dovecot 2.1, which currently just uses the postfix virtual delivery agent... Does anyone know if the use of LMTP (or even the dovecot LDA) still loses the x-original-to header that the postfix vda adds and that I rely heavily on (since I use a lot of aliases), and if it does, is there any solution to get the original recipient added back in before final delivery? Everything I'm reading says that LMTP is better, but I really do need this header (or one like it) to be there so I know who the original recipient was (for filtering and other purposes). Thanks, -- Best regards, Charles

8 16

imapsieve: script not triggered
by Andreas Krischer 25 Mar '19

25 Mar '19

Hi, folks! My problem: I set up dovecot with imapsieve to execute a script whenever a user copies a mail to his Spam folder (spam autolearning). Unfortunately this script is never executed regardless what I’m configuring for imapsieve. It looks like dovecot doesn’t really load the plugin… The "dovecot -n" output is attached. I already tried setting imapsieve_mailbox1_name to *, but even this does not execute the script… Also I tried a mailbox without mail_crypt enabled, no success as well. In the attached mail.log (mail_debug=yes) you can see, that imap_sieve_plugin is loaded, but it isn’t really executed. The normal (LMTP) sieve is working - if a mail is incoming the sieve module shows it work in mail.log: May 7 17:54:04 dovecot dovecot: lmtp(postmaster(a)myhost.name): Debug: YEm9ILyS8FqSaAAAujt/SA: sieve: file storage: Storage path `/var/vmail/myhost.name/postmaster/sieve' not found May 7 17:54:04 dovecot dovecot: lmtp(postmaster(a)myhost.name): Debug: YEm9ILyS8FqSaAAAujt/SA: sieve: file storage: Storage path `/var/vmail/myhost.name/postmaster/.dovecot.sieve' not found May 7 17:54:04 dovecot dovecot: lmtp(postmaster(a)myhost.name): Debug: YEm9ILyS8FqSaAAAujt/SA: sieve: storage: No default script location configured May 7 17:54:04 dovecot dovecot: lmtp(postmaster(a)myhost.name): Debug: YEm9ILyS8FqSaAAAujt/SA: sieve: User has no personal script May 7 17:54:04 dovecot dovecot: lmtp(postmaster(a)myhost.name): Debug: YEm9ILyS8FqSaAAAujt/SA: sieve: file storage: Using script storage path: /etc/dovecot/sieve/after/ May 7 17:54:04 dovecot dovecot: lmtp(postmaster(a)myhost.name): Debug: YEm9ILyS8FqSaAAAujt/SA: sieve: file script: Opened script `spam' from `/etc/dovecot/sieve/after/spam.sieve' May 7 17:54:04 dovecot dovecot: lmtp(postmaster(a)myhost.name): Debug: YEm9ILyS8FqSaAAAujt/SA: sieve: executed after user's Sieve script(1): /etc/dovecot/sieve/after/spam.sieve May 7 17:54:04 dovecot dovecot: lmtp(postmaster(a)myhost.name): Debug: Mailbox <lmtp DATA>: Opened mail UID=1 because: header Message-ID (Cache file is unusable) May 7 17:54:04 dovecot dovecot: lmtp(postmaster(a)myhost.name): Debug: YEm9ILyS8FqSaAAAujt/SA: sieve: Opening script 1 of 1 from `/etc/dovecot/sieve/after/spam.sieve' May 7 17:54:04 dovecot dovecot: lmtp(postmaster(a)myhost.name): Debug: YEm9ILyS8FqSaAAAujt/SA: sieve: Loading script /etc/dovecot/sieve/after/spam.sieve May 7 17:54:04 dovecot dovecot: lmtp(postmaster(a)myhost.name): Debug: YEm9ILyS8FqSaAAAujt/SA: sieve: Script binary /etc/dovecot/sieve/after/spam.svbin successfully loaded May 7 17:54:04 dovecot dovecot: lmtp(postmaster(a)myhost.name): Debug: YEm9ILyS8FqSaAAAujt/SA: sieve: binary save: not saving binary /etc/dovecot/sieve/after/spam.svbin, because it is already stored May 7 17:54:04 dovecot dovecot: lmtp(postmaster(a)myhost.name): Debug: YEm9ILyS8FqSaAAAujt/SA: sieve: Executing script from `/etc/dovecot/sieve/after/spam.svbin' I already spent hours on this problem so please let me know if you have any idea what the problem could be… :( Thanks in advance! Andreas

3 4

Inbox quota usage doubled when mailbox_list_index enabled, under some circumstances
by Chris Dillon 13 Mar '19

13 Mar '19

Hello, I searched through the list archives for anything that appeared to be similar to this but I didn't find any good matches. I apologize if this has been brought up before. Beginning with Dovecot 2.2.34, reported quota usage of a user's inbox can be doubled when the following criteria are met: 1) quota plugin is enabled 2) mailbox_list_index=yes 3) A sub-folder of the inbox exists whose name also matches the prefix (for example, "INBOX.Test"), even if that folder has no contents. (Apparently, some mail clients such as K-9 Mail on Android can create these folders automatically) Downgrading to 2.2.33.2 allows this configuration to work normally. I looked through the changes in git between 2.2.33.2 and 2.2.34 and they appeared extensive, so unfortunately I wasn't able to pinpoint a specific change that caused this. Reproduced on a CentOS 7 server with Dovecot 2.2.34 built from git sources according to https://wiki2.dovecot.org/CompilingSource#Compiling_Dovecot_From_Git using the following minimal configuration: ========== root@centos7 [~]# dovecot -n # 2.2.34 (874deae): /usr/local/etc/dovecot/dovecot.conf # OS: Linux 3.10.0-862.9.1.el7.x86_64 x86_64 CentOS Linux release 7.5.1804 (Core) # Hostname: centos7.local mail_location = maildir:~/Maildir mail_plugins = quota mailbox_list_index = yes namespace inbox { inbox = yes location = prefix = INBOX. separator = . } passdb { driver = pam } plugin { quota = maildir:Mailbox } userdb { driver = passwd } ========== With the system user "myuser" and a minimal Maildir setup containing 1 email in the inbox, and one sub-folder named "INBOX.Test": ========== root@centos7 [~]# ls -lAR /home/myuser/Maildir /home/myuser/Maildir: total 4 drwxr-xr-x. 2 myuser myuser 77 Jul 25 09:36 cur drwxr-xr-x. 5 myuser myuser 56 Jul 25 15:19 .INBOX.Test -rw-r--r--. 1 myuser myuser 14 Jul 25 15:19 maildirsize drwxr-xr-x. 2 myuser myuser 6 Jul 25 09:36 new drwxr-xr-x. 2 myuser myuser 6 Jul 25 09:36 tmp /home/myuser/Maildir/cur: total 12416 -rw-r--r--. 1 myuser myuser 12712627 Jul 25 09:07 1532529376.M543965P58007.centos7.local,S=12712627,W=12877782:2,S /home/myuser/Maildir/.INBOX.Test: total 0 drwxr-xr-x. 2 myuser myuser 6 Jul 25 09:36 cur -rw-r--r--. 1 myuser myuser 0 Jul 25 09:36 maildirfolder drwxr-xr-x. 2 myuser myuser 6 Jul 25 09:36 new drwxr-xr-x. 2 myuser myuser 6 Jul 25 09:36 tmp /home/myuser/Maildir/.INBOX.Test/cur: total 0 /home/myuser/Maildir/.INBOX.Test/new: total 0 /home/myuser/Maildir/.INBOX.Test/tmp: total 0 /home/myuser/Maildir/new: total 0 /home/myuser/Maildir/tmp: total 0 ========== Given this configuration, when "mailbox_list_index" is enabled, after quota recalculation, quota reports that there are 2 messages and that double the amount of storage is used: ========== root@centos7 [~]# doveadm quota recalc -u myuser; doveadm quota get -u myuser Quota name Type Value Limit % Mailbox STORAGE 24830 - 0 Mailbox MESSAGE 2 - 0 ========== When "mailbox_list_index" is disabled and quota is recalculated, it will report the message and storage counts correctly: ========== root@centos7 [~]# doveadm -o 'mailbox_list_index=no' quota recalc -u myuser; doveadm quota get -u myuser Quota name Type Value Limit % Mailbox STORAGE 12415 - 0 Mailbox MESSAGE 1 - 0 ========== I am hoping that someone with much more familiarity with the code path involved here could take a look at this issue and possibly submit a fix for it -- that would be greatly appreciated. Please let me know if you need any more details regarding the replication steps, though I hope that I didn't miss anything. Thank you! -- Chris Dillon Technical Analyst III Migrations Specialist cPanel, Inc.

2 3

lmtp 2.3.2.1 segfault with backtrace
by Tom Sommer 13 Mar '19

13 Mar '19

lmtp on Director crash with 2.3.2.1 # gdb /usr/libexec/dovecot/lmtp /var/core/60174 GNU gdb (GDB) Red Hat Enterprise Linux (7.2-92.el6) Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/libexec/dovecot/lmtp...Reading symbols from /usr/lib/debug/usr/libexec/dovecot/lmtp.debug...done. done. [New Thread 60174] Reading symbols from /usr/lib64/dovecot/libdovecot-lda.so.0...Reading symbols from /usr/lib/debug/usr/lib64/dovecot/libdovecot-lda.so.0.0.0.debug...done. done. Loaded symbols for /usr/lib64/dovecot/libdovecot-lda.so.0 Reading symbols from /usr/lib64/dovecot/libdovecot-storage.so.0...Reading symbols from /usr/lib/debug/usr/lib64/dovecot/libdovecot-storage.so.0.0.0.debug...done. done. Loaded symbols for /usr/lib64/dovecot/libdovecot-storage.so.0 Reading symbols from /usr/lib64/dovecot/libdovecot.so.0...Reading symbols from /usr/lib/debug/usr/lib64/dovecot/libdovecot.so.0.0.0.debug...done. done. Loaded symbols for /usr/lib64/dovecot/libdovecot.so.0 Reading symbols from /lib64/libc.so.6...(no debugging symbols found)...done. Loaded symbols for /lib64/libc.so.6 Reading symbols from /lib64/librt.so.1...(no debugging symbols found)...done. Loaded symbols for /lib64/librt.so.1 Reading symbols from /lib64/libdl.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/libdl.so.2 Reading symbols from /lib64/ld-linux-x86-64.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/ld-linux-x86-64.so.2 Reading symbols from /lib64/libpthread.so.0...(no debugging symbols found)...done. [Thread debugging using libthread_db enabled] Loaded symbols for /lib64/libpthread.so.0 Reading symbols from /usr/lib64/dovecot/libssl_iostream_openssl.so...Reading symbols from /usr/lib/debug/usr/lib64/dovecot/libssl_iostream_openssl.so.debug...done. done. Loaded symbols for /usr/lib64/dovecot/libssl_iostream_openssl.so Reading symbols from /usr/lib64/libssl.so.10...(no debugging symbols found)...done. Loaded symbols for /usr/lib64/libssl.so.10 Reading symbols from /usr/lib64/libcrypto.so.10...(no debugging symbols found)...done. Loaded symbols for /usr/lib64/libcrypto.so.10 Reading symbols from /lib64/libgssapi_krb5.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/libgssapi_krb5.so.2 Reading symbols from /lib64/libkrb5.so.3...(no debugging symbols found)...done. Loaded symbols for /lib64/libkrb5.so.3 Reading symbols from /lib64/libcom_err.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/libcom_err.so.2 Reading symbols from /lib64/libk5crypto.so.3...(no debugging symbols found)...done. Loaded symbols for /lib64/libk5crypto.so.3 Reading symbols from /lib64/libz.so.1...(no debugging symbols found)...done. Loaded symbols for /lib64/libz.so.1 Reading symbols from /lib64/libkrb5support.so.0...(no debugging symbols found)...done. Loaded symbols for /lib64/libkrb5support.so.0 Reading symbols from /lib64/libkeyutils.so.1...(no debugging symbols found)...done. Loaded symbols for /lib64/libkeyutils.so.1 Reading symbols from /lib64/libresolv.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/libresolv.so.2 Reading symbols from /lib64/libselinux.so.1...(no debugging symbols found)...done. Loaded symbols for /lib64/libselinux.so.1 Core was generated by `dovecot/lmtp'. Program terminated with signal 11, Segmentation fault. #0 smtp_client_command_set_replies (cmd=0x0, replies=1) at smtp-client-command.c:401 401 i_assert(cmd->replies_expected == 1 || Missing separate debuginfos, use: debuginfo-install glibc-2.12-1.212.el6.x86_64 keyutils-libs-1.4-5.el6.x86_64 krb5-libs-1.10.3-65.el6.x86_64 libcom_err-1.41.12-24.el6.x86_64 libselinux-2.0.94-7.el6.x86_64 openssl-1.0.1e-57.el6.x86_64 zlib-1.2.3-29.el6.x86_64 (gdb) bt full #0 smtp_client_command_set_replies (cmd=0x0, replies=1) at smtp-client-command.c:401 __func__ = "smtp_client_command_set_replies" #1 0x00007f5d14f40f3f in smtp_client_transaction_data_cb (reply=0x7ffe5cd19650, trans=0x7f5d176ae2b8) at smtp-client-transaction.c:658 conn = 0x7f5d176ade80 rcpt = 0x7f5d176ae560 i = <value optimized out> count = 1 #2 0x00007f5d14f3e941 in smtp_client_command_fail_reply (_cmd=<value optimized out>, reply=0x7ffe5cd19650) at smtp-client-command.c:299 cmd = 0x7f5d17600d18 tmp_cmd = <value optimized out> conn = 0x7f5d176ade80 state = <value optimized out> callback = 0x7f5d14f40e80 <smtp_client_transaction_data_cb> #3 0x00007f5d14f4113f in smtp_client_transaction_fail_reply (trans=0x7f5d176ae2b8, reply=0x7ffe5cd19650) at smtp-client-transaction.c:365 conn = 0x7f5d176ade80 rcpts = <value optimized out> i = <value optimized out> count = <value optimized out> __func__ = "smtp_client_transaction_fail_reply" #4 0x00007f5d14f41442 in smtp_client_transaction_timeout (trans=0x7f5d176ae2b8) at smtp-client-transaction.c:419 reply = {status = 451, enhanced_code = {x = 4, y = 4, z = 0}, text_lines = 0x7f5d1759c090} #5 0x00007f5d14fdbe7b in io_loop_handle_timeouts_real (ioloop=0x7f5d175a4c80) at ioloop.c:641 timeout = 0x7f5d176299d0 tv = {tv_sec = 0, tv_usec = 0} tv_call = {tv_sec = 1534202969, tv_usec = 770866} t_id = 3 item = 0x7f5d176299d0 #6 io_loop_handle_timeouts (ioloop=0x7f5d175a4c80) at ioloop.c:655 _data_stack_cur_id = 2 #7 0x00007f5d14fdd667 in io_loop_handler_run_internal (ioloop=0x7f5d175a4c80) at ioloop-epoll.c:195 ctx = 0x7f5d175af300 events = <value optimized out> event = <value optimized out> list = <value optimized out> io = <value optimized out> tv = {tv_sec = 34, tv_usec = 105308} events_count = <value optimized out> msecs = <value optimized out> ret = 0 i = <value optimized out> call = <value optimized out> __func__ = "io_loop_handler_run_internal" #8 0x00007f5d14fdb7c5 in io_loop_handler_run (ioloop=0x7f5d175a4c80) at ioloop.c:726 __func__ = "io_loop_handler_run" #9 0x00007f5d14fdb9e8 in io_loop_run (ioloop=0x7f5d175a4c80) at ioloop.c:699 __func__ = "io_loop_run" #10 0x00007f5d14f58963 in master_service_run (service=0x7f5d175a4b10, callback=<value optimized out>) at master-service.c:767 No locals. #11 0x00007f5d159eb584 in main (argc=1, argv=0x7f5d175a48a0) at main.c:158 set_roots = {0x7f5d15262e20, 0x7f5d157c2040, 0x7f5d15bf1540, 0x0} service_flags = <value optimized out> storage_service_flags = <value optimized out> tmp_base_dir = 0x7f5d1759c040 "erver not answering (transaction timed out while waiting for reply to DATA)" c = <value optimized out> error = <value optimized out> -- Tom

3 3

expunge not removing attachments?
by Ralf Hildebrandt 12 Feb '19

12 Feb '19

I have a large mail backup folder backup(a)backup.invalid; I'm cleaning up daily like this: infimum=`date -d "-4 day" +"%Y-%m-%d"` doveadm expunge -u backup(a)backup.invalid mailbox INBOX SAVEDBEFORE $infimum doveadm purge -u backup(a)backup.invalid yet I see this: # find attachments/ -type f -ctime +5 | wc -l 7522 # find attachments/ -type f | wc -l 127579 # find attachments/ -type f -mtime +5 | wc -l 14361 # find attachments/ -type f | wc -l 127793 About 5.9% of the files in attachments and below are older than 5 days. Why? Is that normal? using dovecot 2:2.3.1-1 from the official repos. -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | https://www.charite.de

2 3

SELinux policy to allow Dovecot to connect to Mysql
by Robert Moskowitz 05 Feb '19

05 Feb '19

As I have noted in previous messages, I been getting the following on my new mailserver: Apr 7 10:17:27 z9m9z dovecot: dict: Error: mysql(localhost): Connect failed to database (postfix): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (13) - waiting for 25 seconds before retry They go away when I setenforce 0. It is not a timing issue as I earlier thought. So I googled dovecot mysql selinux and the only worthwhile hit was: http://zszsit.blogspot.com/2012/12/dovecot-mysql-selinux-issue-on-centos6.h… that provides a /etc/selinux/dovecot2mysql.te and other selinux stuff. Is there a simpler way like a setsbool option? With all the howtos on dovecot with mysql, it is interesting that none of them seem to have this problem. Maybe because they connect to mysql through TCP port 3306 which has ITS set of problems (like MariaDB defaults to not listening on TCP). thanks!

1 3

auth: Error - Request timed out
by Hajo Locke 01 Feb '19

01 Feb '19

Hello List, i use dovecot 2.2.22 and have the same problem described here: https://dovecot.org/pipermail/dovecot/2017-November/110020.html I can confirm that sometimes there is a problem with connection to mysql-db, but sometimes not. Reasons for failing are still under investigation by my mates. My current main problem is, that this fail seems to be a one way ticket for dovecot. Even if mysql is verifyable working again and waiting for connection dovecot stucks furthermore with errors like this: May 29 07:00:49 hostname dovecot: auth: Error: plain(mail(a)example.com,xxx.xxx.xx.xxx,<HGI4FVFt2Oy80j3P>): Request 999.7 timed out after 150 secs, state=1 When restarting dovecot all is immediately working again. Is there a way to tell dovecot to restart auth services or reinitialize mysql-connection after these hard fails? I could insert "idle_kill = 1 mins" into service auth and service auth-worker, but i dont know if this would work. Unfortunately i am not able to reproduce this error and there are always a couple of days between errors. Thanks, Hajo

4 6

Freebsd: Fatal error - Support not compiled in for passdb driver 'sql'
by Graham S. Jarvis 14 Jan '19

14 Jan '19

Hello, I have the following fatal error when I uncomment #!include auth-sql.conf.ext in .../conf.d/10-auth.conf dovecot: auth: Fatal: Support not compiled in for passdb driver 'sql' I have installed via 'pkg'. Do I have to install the ports tree to get sql support ? Thanks, -Graham-

4 9

Dovecot Submission Proxy Auth
by Paul Hecker 12 Jan '19

12 Jan '19

Hi, Dovecot 2.3.1 (8e2f634). Could not get Dovecot to forward the (plain) authentication to the SMTP server using submission. Reason why I need it is sender spoofing (do not want my employees to send messages in behalf of me). In exim I can disable sender spoofing with the authenticated user. When sending through dovecot, exim either does not accept the email (need auth) or relay every sender address (because relaying from localhost). Am I missing a setting or do I need any additional field in the (MySQL) user_query/password_query to forward the password? You can find my config here: https://gist.github.com/lluuaapp/7daddf761131da47237b0f45e6bab5a8 Thanks, Paul

5 12