July 2019 - dovecot - dovecot.org

Re: Segfault of doveconf
by Claudio Prono 11 Jul '19

11 Jul '19

On 9.7.2019 13.40, Aki Tuomi via dovecot wrote: On 9.7.2019 12.54, Claudio Prono wrote: On 4.7.2019 19.00, Claudio Prono via dovecot wrote: Sorry to bother again, but the problem persist. I have checked all the configurations of dovecot, and seems all ok, but randomly the segfault pops up again, without no apparently reason. My packages are: ii dovecot-core 1:2.2.22-1ubuntu2.10 amd64 secure POP3/IMAP server - core files ii dovecot-imapd 1:2.2.22-1ubuntu2.10 amd64 secure POP3/IMAP server - IMAP daemon ii dovecot-managesieved 1:2.2.22-1ubuntu2.10 amd64 secure POP3/IMAP server - ManageSieve server ii dovecot-mysql 1:2.2.22-1ubuntu2.10 amd64 secure POP3/IMAP server - MySQL support ii dovecot-pop3d 1:2.2.22-1ubuntu2.10 amd64 secure POP3/IMAP server - POP3 daemon ii dovecot-sieve 1:2.2.22-1ubuntu2.10 amd64 secure POP3/IMAP server - Sieve filters support Can be a temporarly solution to uninstall dovecot-managesieved ? Cordially, Claudio. On 5.7.2019 09:59 Aki via dovecot wrote: You should install dovecot-dbg, and follow https://www.dovecot.org/bugreport-mail, then we could figure out why it's crashing in the first place. Aki I have followed the instructions to debug the problem, and I have uploaded the crash log at this location: https://justpaste.it/5wlot Yesterday the system have got some I/O Errors on the hard disk (virtual system hosted from Seeweb). The problems on the disk now are solved by the provider, and the crash reported is before that. So, now my question is: the doveconf crash can be linked to the hardware problem ? Or something else? Thanks for your help. Cordially, Claudio Prono. I tried unpacking the crash file you pastebin, can you please send it as attachment to me? Aki It seems you are at least missing postmaster_address in your config. I was not able to actually make dovecot crash when I tested, so can you try adding this setting and see if it helps? Aki On 9.7.2019 09:59 Claudio Prono via dovecot wrote: I have added it to the configuration, and restarted dovecot. Now I wait and see if this error again. Thank you for your time. Cheers, Claudio. ---- Just a rapid update, the problem of the segmentation fault of doveconf was not occourred again in the past two days. I think the problem was somehow related to the hardware failure on the virtual disk where the system is hosted. Now, the hardware problem is resolved from the virtual system maintainer, and doveconf has stopped to crash. Anyway, thanks for the support. Claudio.

1 0

Dovecot 2.3.6 on Solaris10: build issues, segfaults
by Joseph Tam 11 Jul '19

11 Jul '19

Hopefully, there is some fix for issue 3 which is beyond my skill to fix. Issue 1) Need recent gcc version Building Dovecot versions <=2.2.x using gcc 3.4.4 worked, but this gcc version fails to build 2.3.x properly: symptoms include compile failures and executable crashes that depended on the amount of optimization used, which is usually a sign of compiler bugs. (It could also be issue 3 in disguise.) Either way, I updated to gcc 9.1.0. Issue 2) Cannot build with --enable-hardening Using gcc 9.1.0, "configure" step fails because fd passing was broken, but the real problem was a compilation failure when "--enable-hardening" is used. Demonstration: # echo 'int main(){char a[1]; strcpy(a,a);} ' | gcc -w -fstack-protector-strong -x c - Undefined first referenced symbol in file __stack_chk_guard /var/tmp//cc12L9zV.o (symbol scope specifies local binding) ld: fatal: symbol referencing errors. No output written to a.out collect2: error: ld returned 1 exit status I'm not sure if this is a Solaris10 fumble, but configuring "--disable-hardening" removes the "-fstack-protector-strong" compiler option, which resolves this issue. Issue 3) dovecot/doveconf segfaults on startup It crashes here while processing dovecot.conf, as does "doveconf" (settings-parser.c:1519 in setting_copy()) *dest_size = *src_size; It appears *src_size is not an 8-byte address aligned (0x5597c). It inherits this value from the calling routine as the sum of "set" (8-byte aligned) + "def->offset"=20 => misaligned address. (settings-parser.c:1597 in settings_dup_full()) src = CONST_PTR_OFFSET(set, def->offset); (gdb) p set $2 = (const void *) 0x55968 (gdb) p *def $3 = {type = SET_SIZE, key = 0x2d548 "submission_max_mail_size", offset = 20, list_info = 0x0} (gdb) bt full #0 0xff190690 in setting_copy (type=SET_SIZE, src=0x5798c, dest=0xf7ed4, pool=0xf29a0, keep_values=false) at settings-parser.c:1519 src_size = 0x5798c dest_size = 0xf7ed4 __func__ = "setting_copy" #1 0xff190bc4 in settings_dup_full (info=0x2d9ac <submission_setting_parser_info>, set=0x57978, pool=0xf29a0, keep_values=false) at settings-parser.c:1600 def = 0x2d7d4 <submission_setting_defines+80> src = 0x5798c dest_set = 0xf7ec0 dest = 0xf7ed4 children = 0x2c i = 1105688 count = 4279837964 #2 0xff192724 in settings_parser_dup (old_ctx=0x9ec08, new_pool=0xf29a0) at settings-parser.c:1946 new_ctx = 0x10def0 iter = 0x0 links = {_table = 0xa23c0, _key = 0xa23c0, _keyp = 0xa23c0, _const_key = 0xa23c0, _value = 0xa23c0, _valuep = 0xa23c0} new_link = 0x10b488 value = 0x0 key = 0x0 i = 0 parser_pool = 0x10ded8 keep_values = false __func__ = "settings_parser_dup" #3 0x0001fc0c in config_filter_parsers_get (ctx=0x657a8, pool=0xf29a0, modules=0x0, filter=0x583e8, parsers_r=0xffbff9c4, output_r=0xffbff9bc, error_r=0xffbffa44) at config-filter.c:372 src = 0xf29d8 dest = 0xf2a48 error = 0x0 error_p = 0x52cfc i = 26 count = 33 __func__ = "config_filter_parsers_get" #4 0x00021be4 in config_all_parsers_check (ctx=0xffbffac8, new_filter=0x657a8, error_r=0xffbffa44) at config-parser.c:441 parsers = 0x58180 tmp_parsers = 0x4 output = {specific_services = 0xf2a20, service_uses_local = false, service_uses_remote = false, used_local = false, used_remote = false, permission_denied = false} i = 0 count = 3 ssl_set = 0x4 <error: Cannot access memory at address 0x4> global_ssl_set = 0x32188 "" tmp_pool = 0xf29a0 ssl_warned = false ret = 0 __func__ = "config_all_parsers_check" #5 0x00022ec8 in config_parse_finish (ctx=0xffbffac8, error_r=0xffbffb98) at config-parser.c:747 new_filter = 0x657a8 error = 0x33c22 "/user=%s" ret = 0 #6 0x00024230 in config_parse_file (path=0x50468 "/local/dovecot/etc/dovecot/dovecot.conf", expand_values=false, modules=0x0, error_r=0xffbffb98) at config-parser.c:1064 root = {prev = 0x0, input = 0x0, path = 0x50468 "/local/dovecot/etc/dovecot/dovecot.conf", linenum = 400} ctx = {pool = 0x52b58, path = 0x50468 "/local/dovecot/etc/dovecot/dovecot.conf", , all_parsers = {arr = {buffer = 0x58160, element_size = 4}, v = 0x58160, v_modifiable = 0x58160}, root_parsers = 0x52b70, cur_section = 0x58388, cur_input = 0x0, str = 0x58458, pathlen = 0, section_counter = 6, error = 0x0, old = 0x58580, seen_settings = {_table = 0x0, _key = 0x0, _keyp = 0x0, _const_key = 0x0, _value = 0x0, _valuep = 0x0}, filter = 0x0, expand_values = false, hide_errors = false} i = 33 count = 33 key = 0x0 value = 0x0 full_line = 0x0 type = CONFIG_LINE_TYPE_SKIP line = 0x0 fd = -1 ret = 0 handled = false #7 0x000188dc in main (argc=1, argv=0xffbffc94) at doveconf.c:979 master_service_flags = (MASTER_SERVICE_FLAG_STANDALONE | MASTER_SERVICE_FLAG_NO_INIT_DATASTACK_FRAME | MASTER_SERVICE_FLAG_DONT_SEND_STATS) scope = CONFIG_DUMP_SCOPE_ALL orig_config_path = 0x46300 "/local/dovecot/etc/dovecot/dovecot.conf" config_path = 0x50468 "/local/dovecot/etc/dovecot/dovecot.conf" module = 0x1c00 <error: Cannot access memory at address 0x1c00> module_names = {arr = {buffer = 0x46338, element_size = 4}, v = 0x46338, v_modifiable = 0x46338} filter = {service = 0x0, local_name = 0x0, local_host = 0x0, remote_host = 0x0, local_net = {family = 0, u = {ip6 = {_S6_un = {_S6_u8 = '\000' <repeats 15 times>, _S6_u32 = {0, 0, 0, 0}, __S6_align = 0}}, ip4 = {S_un = {S_un_b = { s_b1 = 0 '\000', s_b2 = 0 '\000', s_b3 = 0 '\000', s_b4 = 0 '\000'}, S_un_w = { s_w1 = 0, s_w2 = 0}, S_addr = 0}}}}, remote_net = {family = 0, u = {ip6 = { _S6_un = {_S6_u8 = '\000' <repeats 15 times>, _S6_u32 = {0, 0, 0, 0}, __S6_align = 0}}, ip4 = {S_un = {S_un_b = {s_b1 = 0 '\000', s_b2 = 0 '\000', s_b3 = 0 '\000', s_b4 = 0 '\000'}, S_un_w = {s_w1 = 0, s_w2 = 0}, S_addr = 0}}}}, local_bits = 0, remote_bits = 0} wanted_modules = 0x0 error = 0xfef47940 <_uberdata> "" exec_args = 0x0 setting_name_filters = 0x0 i = 5 c = -1 ret = -4195172 ret2 = 4 config_path_specified = false expand_vars = false hide_key = false parse_full_config = false simple_output = false dump_defaults = false host_verify = false print_plugin_banner = true hide_passwords = true Joseph Tam <jtam.home(a)gmail.com>

4 6

Dovecot behind Load Balancer
by Paolo Daniele 10 Jul '19

10 Jul '19

Hi, i've a question for you. I've two dovecot imap/pop server behind a zen load balancer. Load balancing is made by lx4nat so the public ip address of my load balancer contact directly the dovecot servers. Since few months i've a message from thunderbird that i've reached the imap limit login for ip. I've triend to increase the max user ip parameter but sometimes i've the same problem. It's a strange things that actually i'm able to mitigate by reduce the number of cached connections in Thunderbird but it's not normal. What do you think about that? Maybe there's some tuning that you can suggest. Thank you, Paolo

5 10

solr
by Maciej Milaszewski IQ PL 10 Jul '19

10 Jul '19

Hi I have set up SOLR in accordance with documentation and it runs well. I use solr like: ....... fts = solr fts_solr = debug url=http://IP:8983/solr/ (solr in external machine) ...... Is replication of this system really essential ?? Due to my tests, rollback of the solr server on external machine lasts less than minute and it is nearly non-visible from client side. On the other hand solr replication is quite complicated process and rollback or master-slave switch in this case is non-trivial task, that may have result in whole dataset inconsistency. Do you have any experience in such cases ? Maby load-balance in HAProxy colud do the thing ? Something like: ......... server search1 192.168.1.1:8983 check port 8983 inter 20s fastinter 2 server search2 192.168.1.2:8983 backup ......... Best Regards

2 1

Some questions
by Jérôme Bardot 10 Jul '19

10 Jul '19

Hello, This is my first email here. I want to understand well how dovecot is integrate with ldap in a postfix/dovecot/ldap setup. I use a debian server. More specifically what dovecot need in ldap to work. I saw we can use several "mode" related to virtual domain, etc. For "start" i only need one domain with several address. I currently use fusiondirectory for manage my ldap users. i guess i can use that schema to auto create users email (name.firstname(a)domain.tld for ie) ? I also want to setup some aliases and share directory based on ldap group/role can i do it ? An other question is can we have two domain name for imap.domain.tld && smtp.domain.tld ? IF some questions are out of topic let me know. thx jerome

4 3

Re: Applying Dovecot for a large / deep folder-hierarchy archive - BUG REPORTS!
by Arnold Opio Oree 10 Jul '19

10 Jul '19

Hello Timo, I have scheduled some time to carry through the test requested by Aki. I will add responding to you as part of that process. Not sure if I have said or done anything to offend you, as your tone appears quite abrasive, even where you do not have an actual response to an observation. It is my view that it is a privilege to provide an open source platform, and therefore a responsibility wherever feasible not only to properly maintain and support it, but also to properly document it; both of which from my experience and findings to date, Dovecot have failed to do. Kind regards, Arnold Opio Oree Chief Executive Officer Parallax Digital Technologies arnoldoree(a)parallaxdt.com http://www.parallaxdt.com tel : +44 (0) 333 577 8587 fax : +44 (0) 20 8711 2477 Parallax Digital Technologies is a trading name of Parallax Global Limited. U.K. Co. No. 08836288 The contents of this e-mail are confidential. If you are not the intended recipient you are to delete this e-mail immediately, disregard its contents and disclose them to no other persons. -----Original Message----- From: Timo Sirainen via dovecot <dovecot(a)dovecot.org> Reply-To: Timo Sirainen <timo(a)sirainen.com> To: Arnold Opio Oree <arnold.oree(a)parallaxict.com> Cc: Dovecot Mailing List <dovecot(a)dovecot.org> Subject: Re: Applying Dovecot for a large / deep folder-hierarchy archive - BUG REPORTS! Date: Wed, 10 Jul 2019 11:09:57 +0300 On 7 Jul 2019, at 18.12, Arnold Opio Oree via dovecot < dovecot(a)dovecot.org> wrote: > > Dovecot Team, > > > > I'd like to report a number of bugs, that are to my view all > > critical. It would help to get your doveconf -n, example command lines causing the problems and the error messages it outputs or what the wrong behavior looks like in filesystem. It's now rather difficult to guess what exactly you tried and what happened. Also what kind of output does readpst make? I'm not sure why you're using DIRNAMEs here. > > doveadm-sync -1/general > > > > 1) If DIRNAMEs are not different between command line and > > mail_location doveadm sync will fail, saying that the source and > > destination directories are the same This sounds very strange. I'm not sure what exactly you did, and I couldn't reproduce with a small test. > > 2) The -n / -N flags do not work, and a sync will fail strangely if > > location is specified in the namespace definition Again, sounds strange. > > 3) Adds mbox to path name under mailbox directory (where syncing > from > > an mbox source) Probably with different parameters you could avoid it. > > 4) Not having the mailboxes at source named the same as those at > > destination causes errors and partial sync > > > > 5) Not having the target mailboxes formatted to receive the sync > > (/<mailboxroot>/DIRNAME/) will cause sync errors. I don't understand these. Target mailboxes are supposed to be empty initially, and after the initial sync they should be in the expected format. Why would they be different? > > doveadm-sync > > > > 1) With large synchronizations UIDs are corrupted where multiple > > syncs are executed and the program can no longer synchronize What exactly is the error message? > > dovecot > > > > 1) Panics and fails to expand ~ to user home: observed cases are > > where multiple namespaces are being used Panic message and more details would also help. > > With regards to the last error that I requested help on i.e. > > \Noselect. This has been resolved more-or-less by the workarounds > > that I have implemented for the bugs reported above. > > > > I have seen a number of threads whilst researching the \Noselect > > issue where people have been very confused. My finding was that > > \Noselect is a function of the IMAP specification server-side > > implementation RFC3501 ( > > https://tools.ietf.org/html/rfc3501#section-6.3.6). And for me the > > server was returning directories with \Noselect because the > mailboxes > > were malformed on account of dovadm-sync errors. In order to fix > this > > I formed a bash command to transverse the mailbox hierarchy and > > create the missing folders critical to the sdbox format, namely > > DIRNAME. Nowadays we have also an option to disable creation of \Noselect folders, because they confuse people. Using mail_location = ...:NO- NOSELECT - It won't affect existing folders immediately though. -----Original Message----- From: Arnold Opio Oree <arnoldoree(a)parallaxict.com> Reply-To: arnoldoree(a)parallaxict.com To: Aki Tuomi <aki.tuomi(a)open-xchange.com>, Dovecot Mailing List < dovecot(a)dovecot.org> Cc: debian-release(a)lists.debian.org Subject: Re: Applying Dovecot for a large / deep folder-hierarchy archive - BUG REPORTS! Date: Mon, 08 Jul 2019 13:21:51 +0100 Hello Aki, Thanks for looking into these. I will as requested attempt the relevant procedures under Dovecot 2.3.6. To make the test fair, I will need to fork the relevant production groupware stack (which is now stable and in operation, with our enterprise (email) data successfully migrated from Microsoft Exchange) to a new staging server; given that the current staging server is now of a materially different configuration to the production server (where the most controlled observations of these bugs were made). Kindly give me some time, as I have an urgent internal openstack deployment project to kick-off, that has been delayed by an overrun of this internal groupware stack deployment project. Best regards, Arnold Opio Oree Chief Executive Officer Parallax Digital Technologies arnoldoree(a)parallaxdt.com http://www.parallaxdt.com tel : +44 (0) 333 577 8587 fax : +44 (0) 20 8711 2477 Parallax Digital Technologies is a trading name of Parallax Global Limited. U.K. Co. No. 08836288 The contents of this e-mail are confidential. If you are not the intended recipient you are to delete this e-mail immediately, disregard its contents and disclose them to no other persons. -----Original Message----- From: Aki Tuomi via dovecot < dovecot(a)dovecot.org > Reply-To: Aki Tuomi < aki.tuomi(a)open-xchange.com > To: arnoldoree(a)parallaxict.com , Arnold Opio Oree < arnold.oree(a)parallaxict.com >, Arnold Opio Oree via dovecot < dovecot(a)dovecot.org > Cc: debian-release(a)lists.debian.org Subject: Re: Applying Dovecot for a large / deep folder-hierarchy archive - BUG REPORTS! Date: Mon, 8 Jul 2019 08:48:08 +0300 (EEST) Hi! Thank you for reporting these. We will look into them. In the mean time, can you see if any of these are fixed in 2.3.6? Aki > On 07/07/2019 18:12 Arnold Opio Oree via dovecot < > dovecot(a)dovecot.org > > > wrote: > > > Dovecot Team, > > I'd like to report a number of bugs, that are to my view all > critical. > > System: Replicated on multiple Debian 10 (Buster) systems > Dovecot Version(s): 2.3.4.1 > > doveadm-sync -1/general > > 1) If DIRNAMEs are not different between command line and > mail_location doveadm sync will fail, saying that the source and > destination directories are the same > > 2) The -n / -N flags do not work, and a sync will fail strangely if > location is specified in the namespace definition > > 3) Adds mbox to path name under mailbox directory (where syncing from > an mbox source) > > 4) Not having the mailboxes at source named the same as those at > destination causes errors and partial sync > > 5) Not having the target mailboxes formatted to receive the sync > (/<mailboxroot>/DIRNAME/) will cause sync errors. > > doveadm-sync > > 1) With large synchronizations UIDs are corrupted where multiple > syncs are executed and the program can no longer synchronize > > dovecot > > 1) Panics and fails to expand ~ to user home: observed cases are > where multiple namespaces are being used > > Please let me know if you need me to elaborate or to provide any > further information that you may need to replicate the bugs, or if I > can help in any other way. > > With regards to the last error that I requested help on i.e. > \Noselect. This has been resolved more-or-less by the workarounds > that I have implemented for the bugs reported above. > > I have seen a number of threads whilst researching the \Noselect > issue where people have been very confused. My finding was that > \Noselect is a function of the IMAP specification server-side > implementation RFC3501 ( > https://tools.ietf.org/html/rfc3501#section-6.3.6 > ). And for me the > server was returning directories with \Noselect because the mailboxes > were malformed on account of dovadm-sync errors. In order to fix this > I formed a bash command to transverse the mailbox hierarchy and > create the missing folders critical to the sdbox format, namely > DIRNAME. > > Kind regards, > > Arnold Opio Oree > Chief Executive Officer > Parallax Digital Technologies > > arnoldoree(a)parallaxdt.com > > > http://www.parallaxdt.com > > > tel : +44 (0) 333 577 8587 > fax : +44 (0) 20 8711 2477 > > Parallax Digital Technologies is a trading name of Parallax Global > Limited. U.K. Co. No. 08836288 > > The contents of this e-mail are confidential. If you are not the > intended recipient you are to delete this e-mail immediately, > disregard its contents and disclose them to no other persons. > > -----Original Message----- > From: Arnold Opio Oree via dovecot < > dovecot(a)dovecot.org > > > Reply-To: > arnoldoree(a)parallaxict.com > , Arnold Opio Oree < > arnold.oree(a)parallaxict.com > > > To: > dovecot(a)dovecot.org > > Cc: > rs(a)sys4.de > , > aki.tuomi(a)open-xchange.com > > Subject: Re: Applying Dovecot for a large / deep folder-hierarchy > archive. > Date: Thu, 04 Jul 2019 14:52:28 +0100 > > > Hi all, > > The guidance provided so far has been really helpful, and has helped > a great deal to bringing down wasted energy on finding and executing > a viable path. I am now at the final due action to complete our > Dovecot application to our use-case, but am stuck on an issue that I > cannot find any easily accessible documentation on. > > Generally this is what has been done: > > 1. Uploaded the enterprise data PST to the target groupware server. > 2. Prepared the server by changing the mailbox format to sdbox and > the the Dovecot mail location to > mail_location=/var/vmail/domain/user/mail/ > 3. Converted the pst (on-server) to a recursive mbox hierarchy using > readpst > 4. Executed doveadm-sync to convert mbox hierarchy data into sdbox > and to copy it into the enterprise archive user's mailboxes > 4.i. The biggest issue I faced at this point was doveadm-sync saying > that the source and destination pointed to the same location, whereas > they clearly did not. > 4.i.a. I resolved this by removing the location= setting from the > target namespace, and allowing it to default to mail_location = > setting, and then using a completely different DIRNAME for the import > doveadm-sync execution (which was the desired final DIRNAME); I then > once the sync had been successful, changed the mail_location DIRNAME > so that it pointed to the imported mail DIRNAME; and hence the > imported email data was in the live mailboxes > 4.i.b. doveadm-import failed several times, and was throwing quite > inexplicable errors, so I moved onto doveadm-sync > 4.i.c. I also had to make sure that the source and destination folder > names matched, otherwise doveadm-syc threw very many errors and only > partially imported the data > 4.i.d. An issue which I decided just to live with is that an mbox > DIRNAME was added to each mailbox as well as the DIRNAME specified so > the path to mail is mbox/dbox-Mails. My thought is that with the data > live on an IMAP server it will be possible to do a dysync through TCP > to correct this problem. > > The final issue that I am facing now, is that when readpst finds > empty folders in the source pst hierarchy, it does not create an mbox > file in the mbox hierarchy folder space. This causes doveadm-sync to > not create the target data required for its mailbox structure i.e. > DIRNAME sub-folder and index file (with our configuration). At this > point either doveadm-sync or the dovecot process makes these empty > folders not selectable. > > The question now is how would I go about making all of these folders > selectable, e.g. with an internal or external command line tool to > change flags / create necessary sdbox mailbox constituent data? > > Many thanks, > > Arnold Opio Oree > Chief Executive Officer > Parallax Digital Technologies > > arnoldoree(a)parallaxdt.com > > > http://www.parallaxdt.com > > > tel : +44 (0) 333 577 8587 > fax : +44 (0) 20 8711 2477 > > Parallax Digital Technologies is a trading name of Parallax Global > Limited. U.K. Co. No. 08836288 > > The contents of this e-mail are confidential. If you are not the > intended recipient you are to delete this e-mail immediately, > disregard its contents and disclose them to no other persons. > > -----Original Message----- > From: Arnold Opio Oree via dovecot < > dovecot(a)dovecot.org > > > Reply-To: > arnoldoree(a)parallaxict.com > , Arnold Opio Oree < > arnold.oree(a)parallaxict.com > > > To: Robert Schetterer < > rs(a)sys4.de > >, > dovecot(a)dovecot.org > > Subject: Re: Applying Dovecot for a large / deep folder-hierarchy > archive. > Date: Thu, 27 Jun 2019 12:05:35 +0100 > > > Also you may run into client limits.... i ve seen this with > > outlook, > > apple mail, thunderbird via imap in the past > > Thanks for this note Robert, it was not really an aspect that I was > considering. > > We are operating our groupware services user access through both > Evolution Groupware and KDE Kontact / KMail on Debian Linux > workstations. Hopefully if there is a client issue it should be local > to only one groupware client. > > I will be sure to study / investigate in this - client - area should > any issues that are not traceable to the server-side arise. > > Many thanks, > > Arnold Opio Oree > Chief Executive Officer > Parallax Digital Technologies > > arnoldoree(a)parallaxdt.com > > > > http://www.parallaxdt.com > > > > tel : +44 (0) 333 577 8587 > fax : +44 (0) 20 8711 2477 > > Parallax Digital Technologies is a trading name of Parallax Global > Limited. U.K. Co. No. 08836288 > > The contents of this e-mail are confidential. If you are not the > intended recipient you are to delete this e-mail immediately, > disregard > its contents and disclose them to no other persons. > > > -----Original Message----- > From: Robert Schetterer via dovecot < > dovecot(a)dovecot.org > > > Reply-To: Robert Schetterer < > rs(a)sys4.de > > > To: > dovecot(a)dovecot.org > > > Subject: Re: Applying Dovecot for a large / deep folder-hierarchy > archive. > Date: Thu, 27 Jun 2019 12:53:49 +0200 > > Am 27.06.2019 um 07:35 schrieb Aki Tuomi via dovecot: > > On 26.6.2019 22.12, Arnold Opio Oree via dovecot wrote: > > > Hello to you all, > > > > > > I'd like to ask about my intended application of Dovecot to > > > create > > > a folder-hierarchy for storing our enterprise emails, which are > > > treated as live data rather than archives for compliance or > > > occasional / reactive retrieval. > > > > > > The data is presently not that large (a few gigabytes), but it is > > > expected to grow rapidly. Up to this stage the data has been > > > contained > > > in a Microsoft Exchange mailbox (2013), and then in an offline > > > PST. > > > The move to the offline PST was by necessity, as the large number > > > of > > > folders, and depth of hierarchy to my best understanding caused > > > the > > > exchange server / outlook / evolution mail clients to begin to > > > malfunction. To cope with this the archive was broken up and the > > > bulk stored in the offline PST and the most active components > > > stored in > > > online Exchange mailboxes. > > > > > > I have some understanding of the fs mbox format, and also the > > > mitigations to be made for certain characters / strings. My main > > > concern is whether Dovecot is likely to be able to cope well with > > > a > > > large number of folders / depth of hierarcy. > > > > > > I will really appreciate any help / advice you can give. > > > > > > Best regards, > > > > > > Arnold Opio Oree > > > > > > > Hi! > > > > Dovecot 2.2.34/2.3 supports unlimited folder depth, the only > > limiting > > factor is that the total name may not exceed 4096 bytes. Also > > individual > > folder names may not exceed 255 bytes. > > > > Prior to that the limit is 255 per folder up to 16 levels. > > > > I can't recommend using 'mbox' storage format, please consider > > using > > maildir or sdbox instead. > > > > Aki > > > > > > > > > > --- Aki Tuomi

2 2

Re: Applying Dovecot for a large / deep folder-hierarchy archive - BUG REPORTS!
by Adam D. Barratt 10 Jul '19

10 Jul '19

On 2019-07-10 12:01, Arnold Opio Oree wrote: Please stop CCing this thread to the Debian Release Management mailing list. If there are issues with the Dovecot packages in Debian then they should be reported as bugs against the packages. Thanks. Adam (Debian Release Team member)

2 1

Error: last_login_dict: Failed to write value: dict-server returned failure: sql dict: commit failed: Field 'password' doesn't have a default value
by Lefteris Tsintjelis 10 Jul '19

10 Jul '19

Hi, after upgrading my database I kept on getting those errors. It seems like later versions of databases have strict mode enabled by default and it must either be disabled or change the dovecot database schema. Besides the password, would anyone know what other fields must be changed to the dovecot schema and have a default value? Is there any other dovecot schema for strict mode? Lefteris

1 0

Applying Dovecot for a large / deep folder-hierarchy archive.
by Arnold Opio Oree 10 Jul '19

10 Jul '19

Hello to you all, I'd like to ask about my intended application of Dovecot to create a folder-hierarchy for storing our enterprise emails, which are treated as live data rather than archives for compliance or occasional / reactive retrieval. The data is presently not that large (a few gigabytes), but it is expected to grow rapidly. Up to this stage the data has been containedin a Microsoft Exchange mailbox (2013), and then in an offline PST. The move to the offline PST was by necessity, as the large number offolders, and depth of hierarchy to my best understanding caused the exchange server / outlook / evolution mail clients to begin tomalfunction. To cope with this the archive was broken up and the bulk stored in the offline PST and the most active components stored inonline Exchange mailboxes. I have some understanding of the fs mbox format, and also the mitigations to be made for certain characters / strings. My main concern is whether Dovecot is likely to be able to cope well with a large number of folders / depth of hierarcy. I will really appreciate any help / advice you can give. Best regards, Arnold Opio OreeChief Executive OfficerParallax Digital Technologies arnoldoree(a)parallaxdt.com http://www.parallaxdt.com tel : +44 (0) 333 577 8587fax : +44 (0) 20 8711 2477 Parallax Digital Technologies78A Hatfeild MeadLondonSM4 5PF Parallax Digital Technologies is a trading name of Parallax GlobalLimited. U.K. Co. No. 08836288 The contents of this e-mail are confidential. If you are not theintended recipient you are to delete this e-mail immediately, disregardits contents and disclose them to no other persons.

5 11

10-ssl.conf
by Nicholas Chua 10 Jul '19

10 Jul '19

Hi, I am having an error, doveconf: Fatal: Error in configuration file /usr/local/dovecot/etc/dovecot/conf.d/10-ssl.conf line 6: Unknown setting: service { ssl I am on dovecot 2.3.6. My 10-ssl.conf as follows https://pastebin.com/sYXsmm5b Any idea what went wrong? Thanks nic

2 1