June 2021 - dovecot - dovecot.org

SSL23_GET_CLIENT_HELLO:unknown protocol
by Voytek Eymont 29 Jun '21

29 Jun '21

I have a user failing to get mail , using TBird client is this due to his TBird email client backlevel TLS support ? I'm trying to find out his TBird version, might be an older TBird # dovecot --version 2.3.15 (0503334ab1) # egrep "ssl_protocols|ssl_min_protocol" /etc/dovecot/conf.d/10-ssl.conf #ssl_min_protocol = TLSv1.2 Jun 29 14:23:27 pop3-login: Info: Disconnected: Connection closed: SSL_accept() failed: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol (no auth attempts in 1 secs): user=<>, rip= 111.222.333.555, lip=ser.ver.ip.add, TLS handshaking: SSL_accept() failed: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol, session=<kZ6p99/FW9iTMgHi> Jun 29 14:23:54 pop3-login: Info: Disconnected: Connection closed: SSL_accept() failed: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol (no auth attempts in 1 secs): user=<>, rip= 111.222.333.555, lip=ser.ver.ip.add, TLS handshaking: SSL_accept() failed: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol, session=<Gq5G+d/Fu1STMgHi>

2 2

Increase FTS timeouts for slow(er) machines
by Bojan Čekrlić 29 Jun '21

29 Jun '21

Hello list, I have a question which doesn’t seem to be answered by the documentation. I’m running Dovecot on a Raspberry PI-like computer. I’ve enabled full-text search (FTS) and installed Solr and Tika. Now, Dovecot will timeout Tika after 60 seconds and some emails will not get indexed as there’s simply not enough processing power on the device to work so fast. I don’t mind the slowness, so the question here is — how do I increase this timeout? Looking at the commits it seems that this option is hardcoded in the code and cannot be increased via configuration change? Thanks, B

2 2

good options for Multiple users on a common email account
by Pat G 28 Jun '21

28 Jun '21

Hi, i ve a mail server to manage with some email accounts but with multiples users (+50) using a common email. it indicates sometimes that it can't connect cause too many connections. what are the good options to allow a lot of users for a specific account ? i modifyied these options : auth_worker_max_count = 60 mail_max_userip_connections = 60 is it sufficient ? dovecot -n : auth_worker_max_count = 60 mail_location = maildir:/home/%u/Maildir namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } protocols = " imap" service imap-login { inet_listener imaps { port = 993 ssl = yes } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = # hidden, use -P to show it userdb { driver = passwd } protocol imap { mail_max_userip_connections = 60 } Regards, -- patg

3 3

Unable to run dovecot.2.3.15
by Joe Wong 28 Jun '21

28 Jun '21

Hello, I am trying to setup a new server on Centos 7 running 2.3.15, I compile the source with ./configure --with-pam , make then make install. I have another server using 2.3.8 so I copy my config files from there to /usr/local/etc/dovecot. I am using systemctl enable dovecot then systemctl start dovecot , however it failed to start. There is error found in /var/log/messages: Jun 28 09:14:37 new-ns1 systemd: Started Dovecot IMAP/POP3 email server. Jun 28 09:14:37 new-ns1 dovecot: Error: unlink(/usr/var/run/dovecot/login/login) failed: Read-only file system (in master-settings.c:739) Jun 28 09:14:37 new-ns1 dovecot: Error: unlink(/usr/var/run/dovecot/login/pop3) failed: Read-only file system (in master-settings.c:739) Jun 28 09:14:37 new-ns1 dovecot: Error: unlink(/usr/var/run/dovecot/login/imap) failed: Read-only file system (in master-settings.c:739) Jun 28 09:14:37 new-ns1 dovecot: Error: unlink(/usr/var/run/dovecot/login/dns-client) failed: Read-only file system (in master-settings.c:739) Jun 28 09:14:37 new-ns1 dovecot: Error: unlink(/usr/var/run/dovecot/login/ipc-proxy) failed: Read-only file system (in master-settings.c:739) Jun 28 09:14:37 new-ns1 dovecot: Error: unlink(/usr/var/run/dovecot/token-login/tokenlogin) failed: Read-only file system (in master-settings.c:739) Jun 28 09:14:37 new-ns1 dovecot: Error: unlink(/usr/var/run/dovecot/token-login/imap-urlauth) failed: Read-only file system (in master-settings.c:739) Jun 28 09:14:37 new-ns1 dovecot: Error: service(stats): unlink(/usr/var/run/dovecot/stats-reader) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(stats): unlink(/usr/var/run/dovecot/stats-writer) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(replicator): unlink(/usr/var/run/dovecot/replicator) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(aggregator): unlink(/usr/var/run/dovecot/replication-notify) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(aggregator): unlink(/usr/var/run/dovecot/replication-notify-fifo) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(pop3): unlink(/usr/var/run/dovecot/login/pop3) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(old-stats): unlink(/usr/var/run/dovecot/old-stats) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(old-stats): unlink(/usr/var/run/dovecot/old-stats-mail) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(old-stats): unlink(/usr/var/run/dovecot/old-stats-user) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(log): unlink(/usr/var/run/dovecot/log-errors) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(lmtp): unlink(/usr/var/run/dovecot/lmtp) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(ipc): unlink(/usr/var/run/dovecot/ipc) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(ipc): unlink(/usr/var/run/dovecot/login/ipc-proxy) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(indexer-worker): unlink(/usr/var/run/dovecot/indexer-worker) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(indexer): unlink(/usr/var/run/dovecot/indexer) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(imap): unlink(/usr/var/run/dovecot/login/imap) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(imap): unlink(/usr/var/run/dovecot/imap-master) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(imap-urlauth-worker): unlink(/usr/var/run/dovecot/imap-urlauth-worker) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(imap-urlauth): unlink(/usr/var/run/dovecot/token-login/imap-urlauth) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(imap-urlauth-login): unlink(/usr/var/run/dovecot/imap-urlauth) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(imap-hibernate): unlink(/usr/var/run/dovecot/imap-hibernate) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(doveadm): unlink(/usr/var/run/dovecot/doveadm-server) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(dns-client): unlink(/usr/var/run/dovecot/dns-client) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(dns-client): unlink(/usr/var/run/dovecot/login/dns-client) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(director): unlink(/usr/var/run/dovecot/director-admin) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(director): unlink(/usr/var/run/dovecot/director-userdb) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(dict): unlink(/usr/var/run/dovecot/dict) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(dict-async): unlink(/usr/var/run/dovecot/dict-async) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(config): unlink(/usr/var/run/dovecot/config) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(auth): unlink(/usr/var/run/dovecot/login/login) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(auth): unlink(/usr/var/run/dovecot/token-login/tokenlogin) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(auth): unlink(/usr/var/run/dovecot/auth-login) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(auth): unlink(/usr/var/run/dovecot/auth-client) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(auth): unlink(/usr/var/run/dovecot/auth-userdb) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(auth): unlink(/usr/var/run/dovecot/auth-master) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(auth-worker): unlink(/usr/var/run/dovecot/auth-worker) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(anvil): unlink(/usr/var/run/dovecot/anvil) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Error: service(anvil): unlink(/usr/var/run/dovecot/anvil-auth-penalty) failed: Read-only file system Jun 28 09:14:37 new-ns1 dovecot: Fatal: Failed to start listeners Jun 28 09:14:37 new-ns1 systemd: dovecot.service: main process exited, code=exited, status=89/n/a Jun 28 09:14:37 new-ns1 systemd: Unit dovecot.service entered failed state. Jun 28 09:14:37 new-ns1 systemd: dovecot.service failed. What did I miss here ?

4 5

Dovecot mailing list and DKIM
by Kevin N. 28 Jun '21

28 Jun '21

Hello everybody, Going through my mail logs I noticed that a couple of messages from the Dovecot mailing list failed DKIM validation. For example, this one has failed: https://markmail.org/message/te7tycmpiutw4kia 'opendkim-testkey' shows that the key is OK. The messages in the example comes from yahoo.com, however other messages from yahoo.com, ones that are not sent through the mailing list, are properly validated. The failure is not specific to yahoo.com since a couple of other messages from other domains, sent though the mailing list, also failed DKIM validation. However, the vast majority of the messages from the list properly pass DKIM validation. From what I have read, mailing lists in general do not play very well with DKIM or SPF and the Dovecot mailing list also had some issues with this in the past. With the Dovecot mailing list, I am a bit curious about why the vast majority of the messages from the list pass DKIM validation while a couple of them fail. Does the Dovecot mailing list software alter the message in a way that causes the failure? Or is there something else going on? Any thoughts? Cheers.

4 9

ZLIB/ZSTD Compressed MBOX in Maildir++ layout
by Pedro Ribeiro 28 Jun '21

28 Jun '21

Hello everyone! Our archive namespace is kept in MBOX format with Maildir++ layout due to: * Need to have the email from all users/folders self contained (our base namespace uses MDBOX with single instance storage of attachments) * MBOX/FS layout isn't supported because some folders have messages and subfolders. I'm trying to compress that namespace using zstd/gzip following the informations from Dovecot documentation about the zlib plugin but when the (MBOX/Maildir++) compress and become with .zst/.zstd/.gz suffix (both tested) the system can't read the mailboxes and incorrectly reports the suffix (.zstd/.gz) as a subfolder name (following the Maildir++ file structure). Is there any way to make the MBOX/Maildir++ compatible with the zlib compression? Using Dovecot 2.3.14 on Debian10 Regards. -- Best regards, =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Pedro Ribeiro Politécnico de Lisboa, Serviços da Presidência Departamento de Sistemas de Informação e Comunicações Phone: +351 210 464 700 (general) / VoIP: 80100 Helpdesk: helpdesk(a)net.ipl.pt / https://www.net.ipl.pt =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

2 5

Problem with Lua notification script since 2.3.15 update
by Ralf Becker 28 Jun '21

28 Jun '21

If the Lua-notifications are enabled, Dovecot imap dies immediately at authentication: Jun 28 09:17:29 imap-login: Info: Login: user=<ralf>, method=PLAIN, rip=172.18.0.12, lip=172.18.0.16, mpid=16, TLS, session=<dDhm9c/FYtqsEgAM> Jun 28 09:17:29 imap(ralf)<16><dDhm9c/FYtqsEgAM>: Panic: file dlua-script.c: line 224 (dlua_script_init): assertion failed: (lua_gettop(script->L) == 0) Jun 28 09:17:29 imap(ralf)<16><dDhm9c/FYtqsEgAM>: Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(backtrace_append+0x41) [0x7f9f537ca5c1] -> /usr/lib/dovecot/libdovecot.so.0(backtrace_get+0x22) [0x7f9f537ca6e2] -> /usr/lib/dovecot/libdovecot.so.0(+0x1070bb) [0x7f9f537d70bb] -> /usr/lib/dovecot/libdovecot.so.0(+0x107157) [0x7f9f537d7157] -> /usr/lib/dovecot/libdovecot.so.0(+0x5bb2b) [0x7f9f5372bb2b] -> /usr/lib/dovecot/libdovecot-lua.so.0(+0x5354) [0x7f9f53311354] -> /usr/lib/dovecot/modules/lib22_push_notification_lua_plugin.so(+0x3842) [0x7f9f532c6842] -> /usr/lib/dovecot/modules/lib20_push_notification_plugin.so(push_notification_driver_init+0x19c) [0x7f9f532d062c] -> /usr/lib/dovecot/modules/lib20_push_notification_plugin.so(+0x846f) [0x7f9f532d246f] -> /usr/lib/dovecot/modules/lib20_push_notification_plugin.so(+0x8b6a) [0x7f9f532d2b6a] -> /usr/lib/dovecot/libdovecot-storage.so.0(hook_mail_user_created+0x211) [0x7f9f539084e1] -> /usr/lib/dovecot/libdovecot-storage.so.0(mail_user_init+0x20b) [0x7f9f5390e80b] -> /usr/lib/dovecot/libdovecot-storage.so.0(mail_storage_service_next_with_session_suffix+0x587) [0x7f9f5390bd57] -> /usr/lib/dovecot/libdovecot-storage.so.0(mail_storage_service_lookup_next+0x53) [0x7f9f5390c4c3] -> dovecot/imap(client_create_from_input+0x180) [0x5626eb18fe40] -> dovecot/imap(+0x3112a) [0x5626eb19012a] -> /usr/lib/dovecot/libdovecot.so.0(+0x8d60e) [0x7f9f5375d60e] -> /usr/lib/dovecot/libdovecot.so.0(+0x8d97b) [0x7f9f5375d97b] -> /usr/lib/dovecot/libdovecot.so.0(+0x8e8be) [0x7f9f5375e8be] -> /usr/lib/dovecot/libdovecot.so.0(connection_input_default+0x15e) [0x7f9f537cef5e] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x6d) [0x7f9f537ed3ed] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0x145) [0x7f9f537eea15] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x54) [0x7f9f537ed494] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x40) [0x7f9f537ed600] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x17) [0x7f9f537609e7] -> dovecot/imap(main+0x469) [0x5626eb172c19] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf3) [0x7f9f535020b3] -> dovecot/imap(_start+0x2e) [0x5626eb172cae] Jun 28 09:17:29 imap(ralf)<16><dDhm9c/FYtqsEgAM>: Fatal: master: service(imap): child 16 killed with signal 6 (core dumps disabled - https://dovecot.org/bugreport.html#coredumps) I use the following Dovecot configuration: # Store METADATA information in a file dovecot-metadata in user's home mail_attribute_dict = file:%h/dovecot-metadata # enable metadata protocol imap { imap_metadata = yes } # add necessary plugins for Lua push notifications mail_plugins = $mail_plugins mail_lua notify push_notification push_notification_lua # Lua notification script and URL of EGroupware push server plugin { push_notification_driver = lua:file=/etc/dovecot/dovecot-push.lua push_lua_url = https://Bearer:secret@boulder.egroupware.org/egroupware/push } The Lua script is available under https://github.com/EGroupware/swoolepush/blob/master/doc/dovecot-push.lua The whole Dovecot configurations is available under https://github.com/EGroupware/build.opensuse.org/tree/master/server:eGroupW… Dovecot runs in a Ubuntu 20.04 based container and seems to use the correct liblua5.3: root@750978e5c0ee:/# dpkg -l|grep -i lua ii dovecot-lua 2:2.3.15-1+ubuntu20.04 amd64 secure POP3/IMAP server - LUA support ii liblua5.3-0:amd64 5.3.3-1.1ubuntu2 amd64 Shared library for the Lua interpreter version 5.3 ii lua-json 1.3.4-2 all JSON decoder/encoder for Lua ii lua-lpeg:amd64 1.0.2-1 amd64 LPeg library for the Lua language ii lua-socket:amd64 3.0~rc1+git+ac3201d-4 amd64 TCP/UDP socket library for the Lua language Everything was running fine with 2.3.13, have not tried with 2.3.14 yet. Any ideas? Ralf -- Ralf Becker EGroupware GmbH [www.egroupware.org] Handelsregister HRB Kaiserslautern 3587 Geschäftsführer Birgit und Ralf Becker Leibnizstr. 17, 67663 Kaiserslautern, Germany Telefon +49 631 31657-0

3 4

[BUG] doveadm / mail-crypt: Error when setting new password for a user key
by Kevin N. 28 Jun '21

28 Jun '21

Dovecot version: 2.3.14 When setting a new password for a user key you have the option to prompt the user for the old and the new password, instead of providing them as parameters (using -N and -O instead of -n and -o). However, running: doveadm mailbox cryptokey password -u user@domain -N -O produces an error instead of prompting the user for the old and the new password. The error is: password: option requires an argument -- 'O' You can work around this by providing a dummy input for -O which seems to be properly ignored in the end, but it would be nice to not throw any errors since -O should not expect an argument. Regards.

2 5

Support client_id variable expansion
by Eirik Rye 28 Jun '21

28 Jun '21

Hello, We are using imap_id_log='*' (and imap_id_retain=yes) to log user client information to the dovecot logs, and this information is aggregated to give us extra debugging information for customer support. However, as some clients send the ID information pre-login and others send it post-login, the aggregation logic is needlessly complex as we need to correlate the session IDs of the pre-login ID messages in order to determine the correct user. Hoping to simplify this, I wanted to log the client_id variable on logout, in imap_logout_format: imap_logout_format = in=%i out=%o deleted=%{deleted} expunged=%{expunged} trashed=%{trashed} hdr_count=%{fetch_hdr_count} hdr_bytes=%{fetch_hdr_bytes} body_count=%{fetch_body_count} body_bytes=%{fetch_body_bytes} client_id="%{client_id}" However, this only results in the following log being printed: client_id="UNSUPPORTED_VARIABLE_client_id" While examining the source code (login-common/client-common.c), it seems like this could be trivially supported by adding `client_id` to the `login_var_expand_empty_tab` struct, and adding the relevant code to populate this variable to `get_var_expand_table(struct client *client)`. I am willing to write a pull request for this, unless I am missing some obvious reason why expansion of the client's `client_id` field is not supported in the first place? - Eirik

2 1

Re: [Dovecot-news] Dovecot v2.3.15 released
by Daniel J. Luke 28 Jun '21

28 Jun '21

On Jun 21, 2021, at 7:20 AM, Timo Sirainen <timo(a)sirainen.com> wrote: > Here's a new release with some security fixes and quite a lot of other changes as well. > > * Removed support for Lua 5.2. Use version 5.1 or 5.3 instead. Looks like it doesn't want to build w/o lua now. On my MacOS system configure says: checking whether we will be linking in Lua... no ... but after fixing the implicit i_gettimeofday declaration, build fails with: /bin/sh ../../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2 -fstack-protector-strong -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wno-duplicate-decl-specifier -Wstrict-aliasing=2 -I/opt/local/include -no-undefined -L/opt/local/lib -o libdict_lua.la libtool: link: ar cru .libs/libdict_lua.a ar: no archive members specified (this doesn't happen with 2.3.14.1) -- Daniel J. Luke

5 7