September 2023 - dovecot

config: Error: Conflict in setting ssl_cert found from filter
by Ján Ondrušek 15 Sep '23

15 Sep '23

Hi! I see this intermittent error with my dovecot setup. The most puzzling part is that it sometimes works and sometimes rejects connections, spitting out the log I attached in systeport (DNS). I am binding both ipv4 (TLS+SNI) and ipv6 (dedicated addresses). TLS certificates for corresponding DNS are shared across ipv4 / ipv6. Thank you, Best regards, Jan

2 3

ACL management from SQL
by cyril.leclerc＠mantiq.com 14 Sep '23

14 Sep '23

Hello, we are facing issue, we manage the shared folder from SQL table, but it was never working as we have to manage acl permission from the server itself, we want to manage permissions (read or write) from the same application we can share user mailbox but it is written in dovecot documentation that is not supported now, we tried to find a mail client that could manage it at least, but only thunderbird was able to do it (but in version 60) and not more today. We saw that roundcube could handle it but we use rainloop. 1. It is really not possible at all to manage acl permissions fron SQL like the shared box itself ? 2. I tried to set acl permissions from old version of thunderbird, when i made modification it tried to update the sharedbox table, i did not see the query executed but as we were working on a view, the update failed. Do you know what it tried to do ?

3 8

Shared mailbox listing not working
by exactoph 14 Sep '23

14 Sep '23

Hi there, Having trouble with shared mailboxes. Followed the documentation, but the IMAP LIST doesn't work for mailboxes besides "INBOX" etc. In the meantime I've switched from file based acl_shared_dict to DB based as some people had problems with it. However still no success. I can see entries in the DB, doveadm acl get ... returns that the mailbox is shared, but it is not listed in doveadm mailbox list ... My configuration: https://pastebin.com/aWnMXJ4J Help would be very appreciated!

3 2

Roundcube
by joe a 13 Sep '23

13 Sep '23

Any known issues with installing/running roundcube and dovecot on the same server?

11 22

Trouble with SMTP, TLS and dovecot.org.
by Ralph Seichter 07 Sep '23

07 Sep '23

Hello, I cannot seem to send STARTTLS protected mail to talvi.dovecot.org, and I was wondering if anybody else sees similar problems: Sep 6 22:29:10 ra postfix/smtp[15748]: SSL_connect error to talvi.dovecot.org[94.237.105.223]:25: -1 Sep 6 22:29:10 ra postfix/smtp[15748]: warning: TLS library problem: error:0A000417:SSL routines::sslv3 alert illegal parameter:../openssl-3.0.9/ssl/record/rec_layer_s3.c:1586:SSL alert number 47: Sep 6 22:29:10 ra postfix/smtp[15748]: 1AAE4BE0031: Cannot start TLS: handshake failure Sep 6 22:29:10 ra postfix/smtp[15748]: SSL_connect error to talvi.dovecot.org[2a04:3545:1000:720:acc1:5bff:fe5e:459]:25: -1 Sep 6 22:29:10 ra postfix/smtp[15748]: warning: TLS library problem: error:0A000417:SSL routines::sslv3 alert illegal parameter:../openssl-3.0.9/ssl/record/rec_layer_s3.c:1586:SSL alert number 47: Sep 6 22:29:10 ra postfix/smtp[15748]: 1AAE4BE0031: to=<dovecot(a)dovecot.org>, relay=talvi.dovecot.org[2a04:3545:1000:720:acc1:5bff:fe5e:459]:25, delay=1.6, delays=0.02/0.01/1.6/0, dsn=4.7.5, status=deferred (Cannot start TLS: handshake failure) Sep 6 22:30:05 ra postfix/smtpd[15616]: timeout after END-OF-MESSAGE from localhost[127.0.0.1] Sep 6 22:30:05 ra postfix/smtpd[15616]: disconnect from localhost[127.0.0.1] ehlo=1 xforward=1 mail=1 rcpt=1 data=1 commands=5 The originating server uses Postfix 3.8.2 and OpenSSL library 3.0.9. To be able to send messages to dovecot.org at all, I had to use Postfix's "smtp_tls_policy_maps" setting to explicitly disable TLS for this destination domain. -Ralph

3 5

Fwd: DOvecot requires both IPv4 and IPV6 to start
by Stephen Satchell 06 Sep '23

06 Sep '23

Damn. Forgot to hit "reply all" -- my bad -------- Forwarded Message -------- Subject: Re: DOvecot requires both IPv4 and IPV6 to start Date: Mon, 4 Sep 2023 15:35:51 -0700 From: Stephen Satchell <list(a)satchell.net> Reply-To: list(a)satchell.net To: Arjen de Korte <build+dovecot(a)de-korte.org> On 9/4/23 2:40 PM, Arjen de Korte wrote: > This document was written something like two decades ago and pretty much > all arguments against IPv6 are no longer relevant anymore. In most cases > nowadays, the user experience for IPv6 will be far superior over CGNAT > connections which unfortunately become the standard due to the > increasing cost of IPv4 addresses. Running services over IPv6 may have > been experimental and prone with not so fun problems to diagnose in > 2013, but today this is no longer the case. Running a business? Subscribing to business Internet? Are IPv6 address blocks available? Does IPv6 routing work properly? OK, even though the service desk doesn't know how to answer the above questions about IPv6 correctly, the information *is* available if you dig hard enough. And it seems to work. Can you get a PTR6 record for your mail server? No. At least, not from my upstream. Begins with "A" and ends with "T". Don't even ask about reverse delegations, the blank stare will scare you. (I apologize to everyone on this list. The above diatribe more correctly lives on mailing lists for Sendmail, Postfix, Exim, and other packages that actually originate mail exchanges.)

2 1

DOvecot requires both IPv4 and IPV6 to start
by TWHG Technical 06 Sep '23

06 Sep '23

I think we are off topic. We have a network policy that until such time as we have fully implemented the same security we have on our IPV4 network we simply do not allow IPV6 as it is another attack vector we are not fully upto speed on. So we block all IPV6 at the perimeter and on all switches, firewalls and routers. So if you connect to our network with a device no IP6 is configured and only IPV4 is allowed. We will get there! But that is not this issue. The issue is that dovecot is assuming that IPV6 is there and crashes out if it's not. Hacking the config to only listen on IP4 solves the problem but not while installing from standard repos to install the currently supported version. Cheers Spart

9 13

Bug: Logout counters reset after recreating hibernated process
by Eirik Rye 05 Sep '23

05 Sep '23

Hello, # dovecot --version 2.3.20 (80a5ac675d) When using hibernation (`imap_hibernate_timeout = 10s`), counters such as deleted/expunged messages, appear to be reset after the user process is recreated. Steps to reproduce: 1. Configure IMAP hibernation 2. Login with IMAP client 3. Delete+expunge a message 4. IDLE, and wait 10s for process to be hibernated 5. Unhibernate process (`DONE`), and log out 6. Observe the logged line: 2023-09-05T17:36:26+0200 imap(<redacted>)<776933><jA2nYJ4EPdcqAVtAAADwAAutur4AAAAB>: Info: Disconnected: Logged out in=9 out=88 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0 The expected output is "deleted=1 expunged=1", not "deleted=0 expunged=0". If you follow the steps above, but skip the IDLE/hibernate step, the output is as expected. Interestingly, if the client is disconnected during hibernation (without recreating the process), the output from `imap-hibernate` is still as expected: 2023-09-05T17:45:15+0200 imap-hibernate(<redacted>)<770540><0qE0gJ4Emt8qAVtAAADwAAutur4AAAAB>: Info: Disconnected: Connection closed in=97 out=1020 deleted=1 expunged=1 trashed=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0 This leads me to believe the counters are lost during process recreation, not during hibernation. This is an issue as customers will often come to us asking why messages have disappeared in their inbox, or asking for help to identify which client is expunging messages. Right now, this information is lost if hibernation is used and the client is hibernated after expunging. Best regards, Eirik Rye

2 1

Dovecot with Postfix "no SASL authentication mechanisms"
by mangawilly＠gmail.com 05 Sep '23

05 Sep '23

Hi. Can someone help me please check what is wrong with my config? postfix is saying "no SASL authentication mechanisms" and I'm using dovecot. From what I read so far, it is related to my dovecot settings. Here are the details of my config http://paste.debian.net/1290864/

9 16

auth: Panic: file oauth2-request.c assertion failed
by Urban Loesch 05 Sep '23

05 Sep '23

Hi, I'm running a postfix smtp relay server on which users are getting authenticated trough sasl via the dovecot authentication service. This works without problems. Recently I extended my configuration to authenticate users with the PLAIN mechanism against Azure AD B2C with oauth2 in the future. Important to mention is that currently no users are stored in Azure B2C. I only prepared the hole configuration and authentiucation falls back to mysql database. Now sometimes I get the error below in my logs (not permanently): ... Dec 7 11:36:49 relay-out1 dovecot: auth: Panic: file oauth2-request.c: line 201 (oauth2_request_start): assertion failed: (oauth2_valid_token(input->token)) Dec 7 11:36:49 relay-out1 dovecot: auth: Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(backtrace_append+0x3d) [0x7f399402e62d] -> /usr/lib/dovecot/libdovecot.so.0(backtrace_get+0x1e) [0x7f399402e74e] -> /usr/lib/dovecot/libdovecot.so.0(+0x1006eb) [0x7f399403b6eb] -> /usr/lib/dovecot/libdovecot.so.0(+0x100781) [0x7f399403b781] -> /usr/lib/dovecot/libdovecot.so.0(+0x54b7c) [0x7f3993f8fb7c] -> /usr/lib/dovecot/libdovecot.so.0(+0x4605a) [0x7f3993f8105a] -> /usr/lib/dovecot/libdovecot.so.0(oauth2_passwd_grant_start+0xfa) [0x7f3993f9870a] -> dovecot/auth(db_oauth2_lookup+0x2ca) [0x560d0804368a] -> dovecot/auth(auth_request_default_verify_plain_continue+0x2d6) [0x560d08026436] -> dovecot/auth(auth_policy_check+0x2b) [0x560d0802071b] -> dovecot/auth(+0x29f72) [0x560d0802ff72] -> dovecot/auth(auth_request_handler_auth_continue+0xf7) [0x560d0802a197] -> dovecot/auth(+0x16c62) [0x560d0801cc62] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x69) [0x7f3994051c29] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0x131) [0x7f3994053251] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x4c) [0x7f3994051ccc] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x40) [0x7f3994051e50] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f3993fc4df3] -> dovecot/auth(main+0x415) [0x560d0801abf5] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xeb) [0x7f3993cee09b] -> dovecot/auth(_start+0x2a) [0x560d0801ad8a] ... After the error above postfix says the connection to the authentication server was lost: ... Dec 7 11:36:49 relay-out1 rolrelayout1/smtpd[1655601]: warning: domain.com[12.12.12.12]: SASL LOGIN authentication failed: Connection lost to authentication server ... I was able to make a core dump. ... # gdb /usr/lib/dovecot/auth core.auth.1654357.1670409409 GNU gdb (Debian 8.2.1-2+b3) 8.2.1 ... For help, type "help". Type "apropos word" to search for commands related to "word"... Reading symbols from /usr/lib/dovecot/auth...Reading symbols from /usr/lib/debug/.build-id/bc/f14ed9cc2dda3ee9565fbd7ccd835460008438.debug...done. done. [New LWP 1654357] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `dovecot/auth'. Program terminated with signal SIGABRT, Aborted. #0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 50 ../sysdeps/unix/sysv/linux/raise.c: Datei oder Verzeichnis nicht gefunden. (gdb) bt full #0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 set = {__val = {0, 1415, 1416, 94613970086496, 10, 139885273538955, 155, 139885273347109, 140724590457408, 118, 206158430224, 140724590457744, 140724590457536, 16888407779496842752, 94613970086472, 139885273131758}} pid = <optimized out> tid = <optimized out> ret = <optimized out> #1 0x00007f3993cec535 in __GI_abort () at abort.c:79 save_stage = 1 act = {__sigaction_handler = {sa_handler = 0x73f, sa_sigaction = 0x73f}, sa_mask = {__val = {1024, 18446744073709551615, 94613971926672, 94613971631792, 139885273108347, 94613970084312, 139885273090236, 94613970084312, 16888407779496842752, 94613970084288, 139885273346402, 140724590457744, 94613970084312, 140724590457744, 139885273346761, 94613970084312}}, sa_flags = -1811749030, sa_restorer = 0x5} sigs = {__val = {32, 0 <repeats 15 times>}} #2 0x00007f3993f8feaf in default_fatal_finish (status=0, type=LOG_TYPE_PANIC) at failures.c:465 backtrace = 0x560d0813e220 "/usr/lib/dovecot/libdovecot.so.0(backtrace_append+0x3d) [0x7f399402e62d] -> /usr/lib/dovecot/libdovecot.so.0(backtrace_get+0x1e) [0x7f399402e74e] -> /usr/lib/dovecot/libdovecot.so.0(+0x1006eb) [0x7f39"... backtrace = <optimized out> recursed = 0 #3 fatal_handler_real (ctx=<optimized out>, format=<optimized out>, args=<optimized out>) at failures.c:477 status = 0 #4 0x00007f399403b781 in i_internal_fatal_handler (ctx=<optimized out>, format=<optimized out>, args=<optimized out>) at failures.c:879 No locals. #5 0x00007f3993f8fb7c in i_panic (format=format@entry=0x7f399407a0e8 "file %s: line %d (%s): assertion failed: (%s)") at failures.c:530 ctx = {type = LOG_TYPE_PANIC, exit_status = 0, timestamp = 0x0, timestamp_usecs = 0, log_prefix = 0x0, log_prefix_type_pos = 0} args = {{gp_offset = 40, fp_offset = 48, overflow_arg_area = 0x7ffcff39b4e0, reg_save_area = 0x7ffcff39b420}} #6 0x00007f3993f8105a in oauth2_request_start (set=0x560d08176150, input=0x7ffcff39b5d0, callback=0x560d08042b50 <db_oauth2_lookup_passwd_grant>, context=0x560d082ffe90, p=0x560d082b7eb0, method=0x7f399407a2c6 "POST", url=0x560d08178480 "https://xxx.b2clogin.com/xxx.onmicrosoft.com/B2C_1_ropc/oauth2/v2.0/token?s…", payload=0x560d082b7ed8, add_auth_bearer=false) at oauth2-request.c:201 __func__ = "oauth2_request_start" pool = <optimized out> req = <optimized out> #7 0x00007f3993f9870a in oauth2_passwd_grant_start (set=set@entry=0x560d08176150, input=input@entry=0x7ffcff39b5d0, username=0x560d082ffe38 "user.name", password=0x560d082ffe48 "", callback=callback@entry=0x560d08042b50 <db_oauth2_lookup_passwd_grant>, context=context@entry=0x560d082ffe90) at oauth2-request.c:351 pool = 0x560d082b7eb0 payload = 0x560d082b7ed8 #8 0x0000560d0804368a in db_oauth2_lookup (db=0x560d08176060, req=0x560d082ffe90, token=<optimized out>, request=0x560d082ffba8, callback=0x560d080370b0 <oauth2_verify_plain_continue>, context=0x560d082ffba8) at db-oauth2.c:862 input = {token = 0x560d082ffe48 "", service = 0x560d082ffe20 "smtp", local_ip = {family = 2, u = {ip6 = {__in6_u = {__u6_addr8 = "\303\376\374\322", '\000' <repeats 11 times>, __u6_addr16 = {65219, 54012, 0, 0, 0, 0, 0, 0}, __u6_addr32 = {3539795651, 0, 0, 0}}}, ip4 = {s_addr = 3539795651}}}, real_local_ip = {family = 2, u = {ip6 = {__in6_u = {__u6_addr8 = "\303\376\374\322", '\000' <repeats 11 times>, __u6_addr16 = {65219, 54012, 0, 0, 0, 0, 0, 0}, __u6_addr32 = {3539795651, 0, 0, 0}}}, ip4 = {s_addr = 3539795651}}}, remote_ip = {family = 2, u = {ip6 = {__in6_u = {__u6_addr8 = "*\300\070\226", '\000' <repeats 11 times>, __u6_addr16 = {49194, 38456, 0, 0, 0, 0, 0, 0}, __u6_addr32 = {2520301610, 0, 0, 0}}}, ip4 = {s_addr = 2520301610}}}, real_remote_ip = {family = 2, u = {ip6 = {__in6_u = {__u6_addr8 = "*\300\070\226", '\000' <repeats 11 times>, __u6_addr16 = { 49194, 38456, 0, 0, 0, 0, 0, 0}, __u6_addr32 = {2520301610, 0, 0, 0}}}, ip4 = {s_addr = 2520301610}}}, local_port = 0, real_local_port = 0, remote_port = 0, real_remote_port = 0} __func__ = "db_oauth2_lookup" #9 0x0000560d08026436 in auth_request_default_verify_plain_continue (request=0x560d082ffba8, callback=0x560d0803e6f0 <plain_verify_callback>) at auth-request.c:1123 passdb = 0x560d0814da40 result = 22029 cache_key = <optimized out> error = 0x560d082ffe38 "user.name" password = 0x560d082ffe48 "" __func__ = "auth_request_default_verify_plain_continue" #10 0x0000560d0802071b in auth_policy_check (request=<optimized out>, password=<optimized out>, cb=<optimized out>, context=<optimized out>) at auth-policy.c:575 pool = <optimized out> ctx = <optimized out> #11 0x0000560d0802ff72 in mech_plain_auth_continue (request=0x560d082ffba8, data=0x560d0813d368 "user.name", data_size=30) at mech-plain.c:58 authid = <optimized out> authenid = 0x560d0813d377 "user.name" error = 0x560d0813d320 "h\323\023\b\rV" pass = 0x560d0813d388 "" i = <optimized out> len = <optimized out> count = 2 #12 0x0000560d0802a197 in auth_request_handler_auth_continue (handler=0x560d082d1ae8, args=args@entry=0x560d08268e96 "21\tdGhvbWFzLmZlcnJhcmkAdGhvbWFzLmZlcnJhcmkA") at auth-request-handler.c:738 request = 0x560d082ffba8 data = 0x560d08268e99 "dGhvbWFzLmZlcnJhcmkAdGhvbWFzLmZlcnJhcmkA" data_len = 40 buf = 0x560d0813d320 id = 21 #13 0x0000560d0801cc62 in auth_client_handle_line (line=0x560d08268e91 "CONT\t21\tdGhvbWFzLmZlcnJhcmkAdGhvbWFzLmZlcnJhcmkA", conn=0x560d08276d30) at auth-client-connection.c:228 No locals. #14 auth_client_input (conn=<optimized out>) at auth-client-connection.c:311 _data_stack_cur_id = 3 line = <optimized out> ret = <optimized out> #15 0x00007f3994051c29 in io_loop_call_io (io=0x560d0826f240) at ioloop.c:737 ioloop = 0x560d08145f80 t_id = 2 __func__ = "io_loop_call_io" #16 0x00007f3994053251 in io_loop_handler_run_internal (ioloop=ioloop@entry=0x560d08145f80) at ioloop-epoll.c:222 ctx = 0x560d08148600 events = <optimized out> event = 0x560d08148680 list = 0x560d082ae620 io = <optimized out> tv = {tv_sec = 0, tv_usec = 315566} events_count = <optimized out> msecs = <optimized out> ret = <optimized out> i = 0 j = <optimized out> call = <optimized out> __func__ = "io_loop_handler_run_internal" #17 0x00007f3994051ccc in io_loop_handler_run (ioloop=0x560d08145f80) at ioloop.c:789 __func__ = "io_loop_handler_run" #18 0x00007f3994051e50 in io_loop_run (ioloop=0x560d08145f80) at ioloop.c:762 __func__ = "io_loop_run" #19 0x00007f3993fc4df3 in master_service_run (service=0x560d08145dd0, callback=<optimized out>) at master-service.c:869 No locals. #20 0x0000560d0801abf5 in main (argc=<optimized out>, argv=<optimized out>) at main.c:393 c = <optimized out> ... And "doveconf -n": ... # 2.3.19.1 (9b53102964): /etc/dovecot/dovecot.conf # OS: Linux 5.10.0-18-amd64 x86_64 Debian 10.13 # Hostname: relay-out1.domain.com auth_cache_negative_ttl = 0 auth_cache_size = 40 M auth_cache_ttl = 30 days auth_mechanisms = plain login auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_%@ auth_username_translation = %@ auth_verbose = yes auth_verbose_passwords = plain auth_worker_max_count = 100 disable_plaintext_auth = no namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-oauth2.plain.conf.ext driver = oauth2 mechanisms = plain login } passdb { args = /etc/dovecot/dovecot-sql-account.conf driver = sql } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } userdb { args = /etc/dovecot/dovecot-sql-account.conf driver = sql } ... System OS is Debian 10, Dovecot installed from dovecot repository. Many thanks Urban

1 1