January 2024 - dovecot

Permission problem when using sieve script
by tacodewolff＠gmail.com 07 Feb '24

07 Feb '24

Hi, I've been banging my head on this problem for a while now and need some help on this issue. I've set up Dovecot with Sieve scripts, which use bash scripts to either learn ham or learn spam. This is sent to the Rspamd controller (using a Unix socket at /var/run/rspamd/rspamd-controller.sock). The socket has permissions 660 and is owned by _rspamd:_rspamd. It's directory and parent directory have 755. The sieve script looks like: exec /usr/bin/rspamc -h /var/run/rspamd/rspamd-controller.sock -P 'password' learn_ham I've added the dovecot user to the _rspamd group, but I consistently get "Permission denied" when marking emails as ham/spam. Only when I make the socket permission 666 it works correctly. Also when the permission is 660 but ownership is _rspamd:dovecot it works as well. I don't want the former as anyone could connect, and the latter can't be set automatically in Rspamd. I'm pulling my hairs out. I've tried to figure out the user and group that dovecot uses to run the sieve script (creatively by 'exit'ing the bash script with the uid or gid as error code), and they are both 97 (i.e. dovecot uid and gid). I've tried personally logging in as dovecot using 'sudo -u dovecot bash' and then using 'socat' to connect to the socket. This works fine. But through the dovecot sieve script for some reason it's not working. I've tried disabling SELinux and fapolicyd, but no luck. Is Dovecot using some restricted permissions when running sieve scripts? # dovecot --version 2.3.16 (7e2e900c1a) Thank you, Taco

1 1

Recommended changes for delivery from Exim
by jgh＠exim.org 05 Feb '24

05 Feb '24

Hi, Security changes to Exim have invalidated certain suggested configurations in the Dovecot wiki. As I do not have a Dovecot installation to test, I am not going to write any updates there. It would be good if someone would test these suggestions and then make updates as needed. 1) The use of $local_part and $domain in commands run by the "pipe" transport will be disallowed in the upcoming Exim release. These are currently noted as optional, with the "-m" flag to dovecot-lda. They should be replaced with validated (untainted) versions, commonly $local_part_data and $domain_data, developed via one of the several de-taint methods documented for Exim. The same applies to $original_local_part and $original_domain. 2) The use of $sender_address will likewise be disallowed. This and the "-f" flag can be dropped from the dovecot-lda command line, and the specification of a null "message_prefix" option removed. The defaults for a pipe transport will then prefix the message with a suitable Mbox "From " header line, which dovecot-lda is documented to extract the sender from. Both of these suggestions are back-compatible to the current 4.95 release of Exim, and will be required with the 4.96 release. -- Cheers, Jeremy Refs: - https://wiki.dovecot.org/LDA/Exim - https://doc.dovecot.org/configuration_manual/protocols/lda/

3 3

Splitting up packages
by Larry Rosenman 01 Feb '24

01 Feb '24

I'm the maintainer of the dovecot and pigeonhole ports on FreeBSD and am looking to make separate installable packages like the project does for Linux. Can you help me know what needs to go where and what options (if any) change the base? Thanks for any help here. -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 214-642-9640 (c) E-Mail: larryrtx(a)gmail.com US Mail: 5708 Sabbia Dr, Round Rock, TX 78665-2106 I'm the maintainer of the dovecot and pigeonhole ports on FreeBSD and am looking to make separate installable packages like the project does for Linux. Can you help me know what needs to go where and what options (if any) change the base? Thanks for any help here. -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 214-642-9640 (c) E-Mail: larryrtx(a)gmail.com US Mail: 5708 Sabbia Dr, Round Rock, TX 78665-2106

3 2

We couldn't drop root group privileges
by forumforeign 01 Feb '24

01 Feb '24

Hello. I have - dovecot 2.3.21 (also tried 2.3.5) - postfix 3.8.5 (also tried 3.8.4) It's a new setup where I use postfix + dovecot-delivery for delivery to local mailbox. At logs I have an error and mail deffers in queue: dovecot: [ID 702911 mail.crit] lda(poli(a)domain.com)<7808>: Fatal: We couldn't drop root group privileges (wanted=6(mail), gid=0(root), egid=0(root)) Postfix and dovecot start from root UID, but user dovecot/postfix has corresponding groups to run as specific group: root@solaris:# id -a dovecot uid=110(dovecot) gid=110(dovecot) groups=110(dovecot),6(mail) root@solaris:# id -a postfix uid=26(postfix) gid=26(postfix) groups=26(postfix),6(mail) root@solaris:# id -a root uid=0(root) gid=0(root) groups=0(root),1(other),2(bin),3(sys),4(adm),6(mail),7(tty),8(lp),12(daemon) Also, when I run a dtrace (a system call trace mechanism) I see, that dovecot-lda runs as group "mail" (gid=6), so, there isn't any problem, but dovecot thinks another: UID GID PID PPID ARGS 0 26 7719 7638 pipe -n dovecot -t unix flags=DRhu user=nobody:mail argv=/usr/libexec/dovecot/d 60001 6 7720 7718 /usr/libexec/dovecot/dovecot-lda -f mega(a)domain.com -d poli(a)domain.com 60001 6 7720 7718 /usr/bin/amd64/doveconf -f service=lda -c /etc/dovecot/dovecot.conf -m lda -e / 60001 6 7720 7718 /usr/libexec/dovecot/dovecot-lda -f mega(a)domain.com -d poli(a)domain.com What exactly dovecot wants and how to solve this error? Here is part of "dovecot -n" output which is corresponding to user/group/lda: # 2.3.5.1 (7ec6d0ade): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.6 (92dc263a) # OS: SunOS 5.11 i86pc # Hostname: solaris auth_debug = yes auth_mechanisms = plain login auth_verbose = yes default_process_limit = 99 disable_plaintext_auth = no first_valid_gid = 6 first_valid_uid = 60001 last_valid_gid = 6 last_valid_uid = 60001 mail_access_groups = mail mail_debug = yes mail_gid = 6 mail_location = /var/mail/vmail/%u@%d mail_max_userip_connections = 99 mail_privileged_group = mail mail_uid = 60001 maildir_very_dirty_syncs = yes ... service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } } ... protocol lda { mail_plugins = " sieve" postmaster_address = postmaster } PS. Also, I have aother box with very old setup (dovecot 2.2.27) and it works with the same configuration without any errors. I thought that this is OS specific problem and tried on the same version OS run a dovecot 2.3.21, but still had an errors.

1 1

JMAP support?
by Mark Constable 31 Jan '24

31 Jan '24

On Fri Jan 25 2019 Aki wrote: > There is no JMAP support in any dovecot version yet. Two years on so what is the status of JMAP support in Dovecot now?

7 10

doveadm sync failed after adding "mechanisms = plain login" to passdb
by James 31 Jan '24

31 Jan '24

Hello, After adding `mechanisms = plain login` to passdb (passwd-file), `doveadm -D sync -u e(a)example.com -d -N -l 30 -U` failed with ``` Jan 26 06:49:22 doveadm(e(a)example.com): Error: remote(server2.example.com:61526): doveadm(1.1.1.1,e(a)example.com): auth-master: passdb lookup(e(a)example.com): Auth PASS lookup failed Jan 26 06:49:22 doveadm(e(a)example.com): Error: remote(server2.example.com:61526): doveadm(1.1.1.1,e(a)example.com): /run/dovecot/auth-userdb: passdb lookup failed (to see if user is proxied, because doveadm_port is set) ``` With `auth_debug=yes`, I found these lines. ``` Jan 26 04:55:37 server2 dovecot: auth: Debug: skipping passdb: mechanism filtered Jan 26 04:55:37 server2 dovecot: auth: Error: All password databases were skipped ``` What should I do to fix it without deleting `mechanisms = plain login`? More information could be found on [this link](https://github.com/orgs/docker-mailserver/discussions/3836#discussion…. Thanks

1 0

Re: JMAP support?
by Marcel Schmidt 30 Jan '24

30 Jan '24

Hi, is there any progress on this? Since the IETF draft is long completed, will you integrate JMAP in a coming dovecot version or is this topic completely abandoned? Marcel Hi, is there any progress on this? Since the IETF draft is long completed, will you integrate JMAP in a coming dovecot version or is this topic completely abandoned? Marcel

1 0

One Way sync is deleting emails
by Steve Moser 30 Jan '24

30 Jan '24

Hello, I am hoping that you can help me. I am running this command on my main email server, one way backup/sync to the backup server. sudo doveadm sync -1 -A remote:root@x.x.x.x x.x.x.x is my remote server. I will add a new email on the main, run the command and it shows up on the backup. - Great! Now I delete that email from the main, run the command and the email is removed from the backup. That should not delete anything from the backup, correct? I prefer Not to delete anything, only update/add. Do you see what I am doing wrong? Thank You!!!! Here my installed versions dovecot-core 1:2.3.16+dfsg1-3ubuntu2.2 dovecot-imapd 1:2.3.16+dfsg1-3ubuntu2.2 dovecot-lmtpd 1:2.3.16+dfsg1-3ubuntu2.2 dovecot-mysql 1:2.3.16+dfsg1-3ubuntu2.2 dovecot-pop3d 1:2.3.16+dfsg1-3ubuntu2.2 postfix 3.6.4-1ubuntu1.2 amd64 High-performance mail transport agentpostfix-mysql 3.6.4-1ubuntu1.2 amd64 MySQL map support for Postfixpostfix-policyd-spf-python 2.9.3-1 all Postfix policy server for SPF checking Hello, I am hoping that you can help me. I am running this command on my main email server, one way backup/sync to the backup server. sudo doveadm sync -1 -A remote:root@x.x.x.x x.x.x.x is my remote server. I will add a new email on the main, run the command and it shows up on the backup. - Great! Now I delete that email from the main, run the command and the email is removed from the backup. That should not delete anything from the backup, correct? I prefer Not to delete anything, only update/add. Do you see what I am doing wrong? Thank You!!!! Here my installed versions dovecot-core 1:2.3.16+dfsg1-3ubuntu2.2 dovecot-imapd 1:2.3.16+dfsg1-3ubuntu2.2 dovecot-lmtpd 1:2.3.16+dfsg1-3ubuntu2.2 dovecot-mysql 1:2.3.16+dfsg1-3ubuntu2.2 dovecot-pop3d 1:2.3.16+dfsg1-3ubuntu2.2 postfix 3.6.4-1ubuntu1.2 amd64 High-performance mail transport agent postfix-mysql 3.6.4-1ubuntu1.2 amd64 MySQL map support for Postfix postfix-policyd-spf-python 2.9.3-1 all Postfix policy server for SPF checking

2 1

sieve filter generated email- sent folder
by joe a 29 Jan '24

29 Jan '24

dovecot 2.3.21 pigeonhole 0.5.21. Filters created via roundcube. Attempting to have filters detect certain email, send a notification text message to mobile via email, and copy that notification email to "Sent" folder. Filter(s) detect condition, move the email to desired folder and appear, as note in logs outside of dovecot, to sent the notification email. The notification email is not recorded in "Sent" folder and is not received by mobile device. Is this a "do-able" thing in dovecot/pigeonhole? If so, how? Docs available?

3 4

fts indexer stuck on very large plaintext messages
by p h 29 Jan '24

29 Jan '24

Hi, I recently fts indexed a users mailbox with xapian which had 10-15 very large plaintext messages (>20Mb). The content of these messages was mostly a list of all files on a linux server (tripwire and backup reports). The indexer-worker process was completely stuck processing these messages, cpu pegged at 100% running continuously for multiple days. I was wondering if there is way to avoid this issue. It would be great if I could configure limits for the fts indexing process.

2 1