- dovecot - dovecot.org

[Dovecot] ./configure dovecot
by LuKreme 03 Aug '13

03 Aug '13

When I do a ./configure in dovecot (2.2.1) I get this notice (first line): configure: WARNING: you should use --build, --host, --target Then, much later on: checking sys/ucred.h presence... yes configure: WARNING: sys/ucred.h: present but cannot be compiled configure: WARNING: sys/ucred.h: check for missing prerequisite headers? configure: WARNING: sys/ucred.h: see the Autoconf documentation configure: WARNING: sys/ucred.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/ucred.h: proceeding with the compiler's result configure: WARNING: ## ---------------------------------- ## configure: WARNING: ## Report this to dovecot(a)dovecot.org ## configure: WARNING: ## ---------------------------------- ## checking for sys/ucred.h... no at the end I get: configure: creating ./config.status Install prefix . : /usr/local File offsets ... : 64bit I/O polling .... : kqueue I/O notifys .... : kqueue SSL ............ : yes (OpenSSL) GSSAPI ......... : no passdbs ........ : static passwd passwd-file pam checkpassword : -shadow -bsdauth -sia -ldap -sql -vpopmail userdbs ........ : static prefetch passwd passwd-file checkpassword nss : -ldap -sql -vpopmail SQL drivers .... : : -pgsql -mysql -sqlite Full text search : squat : -lucene -solr but there is no makefile created. ./configure --help just runs the configure script again, and none of --build --host or --target have any effect on the errors shown, including the first line error. So I think, ok, fine, I'll grab the latest build (2.2.4). Same result. OK, fine. Let's look at 1.2.17. Same thing, only without the cured.h warning. Still the same error on the first line after ./configure and still no make file. There's no big flashing warning anywhere that I can see that says, "Hey, dummy, this isn't going to work." config.log even ends with a "configure: exit 0" (The system already has dovecot 1.2.17 installed, but I was looking at installing $LATEST). -- May you live in interesting times

2 9

[Dovecot] Mail being delivered but MUA showing empty inbox
by Nigel Smith 03 Aug '13

03 Aug '13

Dovecot : 2.0.19 (see config at http://pastebin.com/raw.php?i=KMaQ9Ccc) Postfix : 2.9.6 (see config at http://pastebin.com/raw.php?i=EEeevHfk) I'm trying to get Dovecot and Postfix working on Ubuntu 12.04LTS but am not having much luck. The problem is that although mail gets delivered to the correct place, however pointing a MUA of any description at Dovecot just yields a purportedly empty inbox ! I will first demonstrate correct delivery of mail, then I will show MUA - domain names changed to protect the innocent ! (1) Mail Delivery Aug 2 08:57:17 ukc-vm02-mx01 postfix/smtpd[2640]: connect from unknown[192.168.199.198] Aug 2 08:57:39 ukc-vm02-mx01 postfix/smtpd[2640]: 76AB04470E: client=unknown[192.168.199.198] Aug 2 08:57:47 ukc-vm02-mx01 postfix/cleanup[2644]: 76AB04470E: message-id=<> Aug 2 08:57:47 ukc-vm02-mx01 postfix/qmgr[2093]: 76AB04470E: from=<an(a)example.com>, size=208, nrcpt=1 (queue active) Aug 2 08:57:47 ukc-vm02-mx01 dovecot: lmtp(2192): Debug: none: root=, index=, control=, inbox=, alt= Aug 2 08:57:47 ukc-vm02-mx01 dovecot: lmtp(2192): Connect from local Aug 2 08:57:47 ukc-vm02-mx01 dovecot: lmtp(2192): Debug: auth input: test(a)ops.example.com uid=1001 gid=1001 home=/srv/mail/ops.example.com/test/./ Aug 2 08:57:47 ukc-vm02-mx01 dovecot: lmtp(2192, test(a)ops.example.com) Debug: Effective uid=1001, gid=1001, home=/srv/mail/ops.example.com/test Aug 2 08:57:47 ukc-vm02-mx01 dovecot: lmtp(2192, test(a)ops.example.com) Debug: maildir++: root=/srv/mail/ops.example.com/test, index=, control=, inbox=/srv/mail/ops.example.com/test, alt= Aug 2 08:57:47 ukc-vm02-mx01 dovecot: lmtp(2192, test(a)ops.example.com) ZH9VM3tm+1GQCAAAwf4bjw: msgid=unspecified: saved mail to INBOX Aug 2 08:57:47 ukc-vm02-mx01 postfix/lmtp[2645]: 76AB04470E: to=<test(a)ops.example.com>, relay=ukc-vm02-mx01.ops.example.com[private/dovecot-lmtp], delay=24, delays=24/0.01/0/0.09, dsn=2.0.0, status=sent (250 2.0.0 <test(a)ops.example.com> ZH9VM3tm+1GQCAAAwf4bjw Saved) Aug 2 08:57:47 ukc-vm02-mx01 dovecot: lmtp(2192): Disconnect from local: Client quit (in reset) Aug 2 08:57:47 ukc-vm02-mx01 postfix/qmgr[2093]: 76AB04470E: removed Aug 2 08:57:48 ukc-vm02-mx01 postfix/smtpd[2640]: disconnect from unknown[192.168.199.198] The mail is correctly saved in the right place….. # cat /srv/mail/ops.ops.example.com/test/new/1375430267.M868397P2192.ukc-vm02-mx01\,S\=477\,W\=486 Return-Path: <an(a)example.com> Delivered-To: <test(a)ops.ops.example.com> Received: from ukc-vm02-mx01.ops.ops.example.com by ukc-vm02-mx01.ops.ops.example.com (Dovecot) with LMTP id ZH9VM3tm+1GQCAAAwf4bjw for <test(a)ops.ops.example.com>; Fri, 02 Aug 2013 08:57:47 +0100 Received: from x (unknown [192.168.199.198]) by ukc-vm02-mx01.ops.ops.example.com (Postfix) with ESMTP id 76AB04470E for <test(a)ops.ops.example.com>; Fri, 2 Aug 2013 08:57:24 +0100 (BST) Subject: test (2) MUA * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. a1 LOGIN test(a)ops.example.com test a1 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS] Logged in a2 EXAMINE INBOX * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS ()] Read-only mailbox. * 0 EXISTS * 0 RECENT * OK [UIDVALIDITY 1375424854] UIDs valid * OK [UIDNEXT 1] Predicted next UID * OK [HIGHESTMODSEQ 1] Highest a2 OK [READ-ONLY] Select completed. a3 LOGOUT * BYE Logging out a3 OK Logout completed. closed

5 29

[Dovecot] problems with doveadm
by listserv 03 Aug '13

03 Aug '13

Hello, since few weeks i have problems with the command: doveadm expunge -A mailbox Trash savedbefore 7d => kernel: doveadm[11609]: segfault at 10 ip b75f146a sp bf856ad0 error 4 in libdovecot.so.0.0.0[b7585000+c8000] but for a single user it's works fine: doveadm expunge -u test(a)vtlx.de mailbox Trash savedbefore 30h I hope there is a solution for this. with regards Mario -- 中華人民共和國

1 0

[Dovecot] system_groups_user syntax especially in LDAP
by ray klassen 02 Aug '13

02 Aug '13

so if possible, I'd like an example of how to include system_groups_user in the userdb setup. I'm using ldap, but I could revert to using pam on ldap. There is a ldap query (gleaned from smbldap-tools) that will return a list of groups for a user (&(objectclass=posixGroup)(memberuid=%u)) but I don't know if the ldap driver will handle it but above all I can't figure out how it fits into the dovecot configuration! I'm trying to get Dovecot 2.1.7 on debian wheezy to recognize shared folders that have group ownership.

1 1

[Dovecot] Lowering Log Levels Back to Defaults
by Asai 02 Aug '13

02 Aug '13

Greetings, I'm sorry for asking what may be a really obvious question, but I'm having a hard time turning off logging, or at least getting less verbose logging. My dsync logs are about 7 MB daily, and I'm trying to get that switched off. At one point I had it on a lower level of verbosity, and I turned it up for debugging purposes, but now I cannot seem to turn it back down, which is something I did many times before. For example the logs are getting tons of Info level messages. dsync(asai(a)globalchangemusic.org): Info: expunge: box=Trash, uid=61625, msgid=<JIRA.14456.1367259371732.1046.1367259384800@hexagon>, size=9586 In dovecot.conf I have commented out the following include, which used to lower the log levels back to the defaults, but I've upgraded Dovecot recently to 2.2.4 from 2.1 something: #!include conf.d/10-logging.conf I had the default levels raised in that config file. I'm not sure this helps but: [vmail@triata ~]# doveconf -n # 2.2.4: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.32.1.el5xen x86_64 CentOS release 5.5 (Final) ext3 auth_mechanisms = plain login mail_home = /vmail/%d/%n/home mail_location = maildir:/vmail/%d/%n mail_plugins = " mail_log notify" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { inbox = yes location = prefix = separator = / type = private } passdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } plugin { sieve = /vmail/%d/%n/sievescript } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = vmail mode = 0660 user = vmail } unix_listener auth-userdb { mode = 0660 user = vmail } user = root } service imap-login { process_min_avail = 3 service_count = 0 vsz_limit = 0 } ssl_cert = </etc/postfix/ssl/triata.globalchangemultimedia.net.pem ssl_key = </etc/postfix/ssl/triata.key userdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } protocol lda { hostname = triata.globalchangemultimedia.net mail_plugin_dir = /usr/lib64/dovecot/ mail_plugins = sieve postmaster_address = postmaster(a)globalchangemultimedia.net } protocol imap { imap_idle_notify_interval = 24 mins mail_max_userip_connections = 60 } -- --Asai

2 2

[Dovecot] Custom quota setup
by Richard Platel 02 Aug '13

02 Aug '13

(Dovecot 2.2-ee) We have a weird quota requirement, we have file storage that we manage through our own APIs but want that usage to come out of the user's mail quota. The usage is in a maildirsize like file uncreatively called filestoresize in the user's maildir. In the past we've been doing this by modifying the quota plugin and re-compiling, but it seems like it should be possible to do this via configuration. Is there a way to add a quota setting pointing at this file for additional usage (not limits)? The feature is used infrequently so it would probably be acceptable use the dirsize backend, but I can't figure out how to configure that to point at a certain directory. We pass custom quota rules for each user in our userdb, and use a custom dict proxy program, so that program could read the file and pass a setting at log in time too (if, for example, there was a setting that said "offset the user's quota usage by X amount") Thanks.

2 5

[Dovecot] dsync backup mails compressed
by Robert Schetterer 02 Aug '13

02 Aug '13

Hi Timo , looks like if zlib plugin is enabled all backupmails ( Maildir ) getting compressed i tested this dsync -o plugin/acl= -o plugin/quota= -u user(a)beispiel.de backup maildir://nfs-backup-data/user@beispiel.de adding -o plugin/zlib= didnt help i am not sure , what is the expected behave , and why -o plugin/quota= does not work ? Best Regards MfG Robert Schetterer -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein

2 3

Re: [Dovecot] HTTP passdb (was: feature request: IMAP passdb prefetch)
by Timo Sirainen 02 Aug '13

02 Aug '13

(Cc'd to dovecot list anyway since other people might be interested) On 2.8.2013, at 18.34, Richard Platel <rplatel(a)tucows.com> wrote: >> Uh. Why not simply something completely different like HTTP-based passdb? > > I can't find info for HTTP on the wiki, can we set that up as a success/fail passdb? We do our own password auth (so we can support custom hash types, etc). I've only a private version of a HTTP-based passdb implemented for a customer. I'm not sure if I should bother adding something to be distributed with Dovecot, since I guess most people would want to modify it in some way anyway. Here's a somewhat modified version of it that hopefully works (at least it compiles): http://dovecot.org/patches/2.2/passdb-openam.c

1 0

[Dovecot] feature request: IMAP passdb prefetch
by Richard Platel 02 Aug '13

02 Aug '13

> On 2.8.2013, at 18.20, Richard Platel <rplatel(a)tucows.com> wrote: > >> It'd be useful for us if the IMAP passdb could be used as a prefetch userdb. >> >> The remote IMAP server could respond with something like >> >> * OK key=value >> * OK key=value >> SEQ OK [CAPABILITY ...] Logged in. >> >> Or >> >> * OK <some JSON key value pairs> >> SEQ OK [CAPABILITY ...] Logged in. >> >> Would anyone else find this useful? > > Uh. Why not simply something completely different like HTTP-based passdb? > I can't find info for HTTP on the wiki, can we set that up as a success/fail passdb? We do our own password auth (so we can support custom hash types, etc).

1 0

[Dovecot] feature request: IMAP passdb prefetch
by Richard Platel 02 Aug '13

02 Aug '13

It'd be useful for us if the IMAP passdb could be used as a prefetch userdb. The remote IMAP server could respond with something like * OK key=value * OK key=value SEQ OK [CAPABILITY ...] Logged in. Or * OK <some JSON key value pairs> SEQ OK [CAPABILITY ...] Logged in. Would anyone else find this useful?

2 1