- dovecot - dovecot.org

[Dovecot] Dovecot "sleep" for short snapshots
by Peer Heinlein 15 Dec '12

15 Dec '12

Making consistent backups from Dovecot with mdbox requires a snapshoted filesystem with (at least) a short Downtime for Dovecot. I'd like to avoid killing several thenthousand IMAP-sessions for 60 seconds. Users don't like that... And the admin dislakes that too... What about a "short sleep" mechanism for Dovecot, where all writes are finished and new writes are easily delayed? I'd like to following process: *) "doveadm sleep" puts Dovecot in sleep-Mode: -- All existing writes are finished (before "doveadm sleep" is allowed to exit) -- All new writes are simply delayed -- All readonly-operations could work normally, so users can fetch and read mails *) The the admin can create a LVM-/SAN-snapshot of the filesystems *) "doveadm unsleep" will finish the magic Overall the whole process will take just some seconds. Users will recognize a simple write-delay, but they can work normally and the aren't unconnected at all. If the snapshot is really fast the users won't recognize the whole situation at all. Peer -- Heinlein Support GmbH Schwedter Str. 8/9b, 10119 Berlin http://www.heinlein-support.de Tel: 030 / 405051-42 Fax: 030 / 405051-19 Zwangsangaben lt. §35a GmbHG: HRB 93818 B / Amtsgericht Berlin-Charlottenburg, Geschäftsführer: Peer Heinlein -- Sitz: Berlin

2 1

[Dovecot] BUG: mishandling of username if it's a keyword?
by Jack Bates 14 Dec '12

14 Dec '12

Dec 14 14:33:03 test2 dovecot: auth: Debug: auth client connected (pid=24143) Dec 14 14:33:14 test2 dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=pop3#011secured#011session=D6dl6dDQdAAAAAAAAAAAAAAAAAAAAAAB#011lip=::1#011rip=::1#011lport=110#011rport=38004#011resp=<hidden> Dec 14 14:33:14 test2 dovecot: auth: Debug: static(home,::1,<D6dl6dDQdAAAAAAAAAAAAAAAAAAAAAAB>): lookup Dec 14 14:33:14 test2 dovecot: auth: Debug: client passdb out: OK#0111#011user=home Dec 14 14:33:14 test2 dovecot: auth: Debug: master in: REQUEST#0112033451009#01124143#0111#011243997dcca92c2dc1d1e401c78b4ea4f Dec 14 14:33:14 test2 dovecot: auth: Debug: master userdb out: USER#0112033451009#011uid=503#011gid=503#011home=/nfs/maildir/vmail/home#011mail_location=maildir:~/Maildir Dec 14 14:33:14 test2 dovecot: pop3-login: Login: user=<home>, method=PLAIN, rip=::1, lip=::1, mpid=24145, secured, session=<D6dl6dDQdAAAAAAAAAAAAAAAAAAAAAAB> Dec 14 14:33:14 test2 dovecot: pop3: Debug: Added userdb setting: mail_location=maildir:~/Maildir Dec 14 14:33:14 test2 dovecot: pop3(uid=503): Error: user uid=503: Couldn't drop privileges: User is missing UID (see mail_uid setting) Dec 14 14:33:14 test2 dovecot: pop3(uid=503): Error: Internal error occurred. Refer to server log for more information. compared to: Dec 14 14:37:25 test2 dovecot: pop3-login: Login: user=<home2>, method=PLAIN, rip=::1, lip=::1, mpid=24190, secured, session=<5Zdb+NDQdQAAAAAAAAAAAAAAAAAAAAAB> Dec 14 14:37:25 test2 dovecot: pop3: Debug: Added userdb setting: mail_location=maildir:~/Maildir Dec 14 14:37:25 test2 dovecot: pop3(home2): Debug: Effective uid=503, gid=503, home=/nfs/maildir/vmail/home2 userdb { args = uid=vmail gid=vmail home=/nfs/maildir/vmail/%u mail_location=maildir:~/Maildir driver = static } This was tested on a static passdb/userdb on a test server as well as production. version 2.1.10. When I have time, I'll dig into it myself after an upgrade to 2.1.12. Jack

2 5

[Dovecot] can't connect to server
by Bernics Gábor | Penta Unió Zrt. 14 Dec '12

14 Dec '12

Hello, I can't connect to a dovecot server (Debian 6.0, default version of Dovecot), I started the daemon but I didn't see errors on console. dovecot-lda works. logs: 2012-12-14 12:47:10 deliver(bernics.gabor(a)penta.hu): Info: Loading modules from directory: /usr/lib/dovecot/modules/lda 2012-12-14 12:47:10 deliver(bernics.gabor(a)penta.hu): Info: Module loaded: /usr/lib/dovecot/modules/lda/lib10_quota_plugin.so 2012-12-14 12:47:10 deliver(bernics.gabor(a)penta.hu): Info: Module loaded: /usr/lib/dovecot/modules/lda/lib90_sieve_plugin.so 2012-12-14 12:47:10 auth(default): Info: master in: USER<------>1<----->bernics.gabor(a)penta.hu<>service=deliver 2012-12-14 12:47:10 auth-worker(default): Info: sql(bernics.gabor(a)penta.hu): query: SELECT email AS user, password FROM users WHERE email 2012-12-14 12:47:10 auth(default): Info: password(bernics.gabor(a)penta.hu): Credentials: 54617661737a69737a656c 2012-12-14 12:47:10 auth(default): Info: master out: USER<----->1<----->bernics.gabor(a)penta.hu 2012-12-14 12:47:10 deliver(bernics.gabor(a)penta.hu): Info: Quota root: name=user backend=dict args=:proxy::quotadict 2012-12-14 12:47:10 deliver(bernics.gabor(a)penta.hu): Info: dict quota: user=bernics.gabor(a)penta.hu, uri=proxy::quotadict, noenforcing=0 2012-12-14 12:47:10 deliver(bernics.gabor(a)penta.hu): Info: maildir: data=/home/vmail/mail/penta.hu/bernics.gabor(a)penta.hu/Maildir 2012-12-14 12:47:10 deliver(bernics.gabor(a)penta.hu): Info: maildir++: root=/home/vmail/mail/penta.hu/bernics.gabor(a)penta.hu/Maildir, inde 2012-12-14 12:47:10 deliver(bernics.gabor(a)penta.hu): Info: dict quota: user=bernics.gabor(a)penta.hu, uri=proxy::quotadict, noenforcing=0 2012-12-14 12:47:10 deliver(bernics.gabor(a)penta.hu): Info: sieve: user's script path /home/vmail/penta.hu/bernics.gabor(a)penta.hu/Maildir/ 2012-12-14 12:47:10 deliver(bernics.gabor(a)penta.hu): Info: sieve: using sieve path for user's script: /etc/dovecot/dovecot.sieve 2012-12-14 12:47:10 deliver(bernics.gabor(a)penta.hu): Info: sieve: executed before user's script(1): /etc/dovecot/dovecot.sieve.before 2012-12-14 12:47:10 deliver(bernics.gabor(a)penta.hu): Info: sieve: opening script /etc/dovecot/dovecot.sieve.before 2012-12-14 12:47:10 deliver(bernics.gabor(a)penta.hu): Info: sieve: opening script /etc/dovecot/dovecot.sieve 2012-12-14 12:47:10 deliver(bernics.gabor(a)penta.hu): Info: Namespace : Using permissions from /home/vmail/mail/penta.hu/bernics.gabor@pen 2012-12-14 12:47:10 deliver(bernics.gabor(a)penta.hu): Info: sieve: msgid=<20121214114708.5BD7917402D(a)mail2.penta.hu>: stored mail into mai config: http://pastebin.com/4imMFZSi Best Regards, Gabor

2 1

[Dovecot] Copying just the folders to new Dovecot server?
by Bjørn T Johansen 14 Dec '12

14 Dec '12

I am setting up a new Dovecot server and I want to start from scratch, i.e. with an empty mailbox. But I want to have the same folders in my new mailbox that I have in my old. Is there a way to create these folders without manually creating one by one? Regards, BTJ -- ----------------------------------------------------------------------------------------------- Bjørn T Johansen btj(a)havleik.no ----------------------------------------------------------------------------------------------- Someone wrote: "I understand that if you play a Windows CD backwards you hear strange Satanic messages" To which someone replied: "It's even worse than that; play it forwards and it installs Windows" ----------------------------------------------------------------------------------------------- -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 2

[Dovecot] Dovecote Warnings
by anarchos78 14 Dec '12

14 Dec '12

Greetings, I have setup Postfix/Dovecote on Ubuntu 12.04 (apt-get install mail-stack-delivery). While everything is working fine in the mail server I have niticed the following errors: srv dovecot: config: Warning: NOTE: You can get a new clean config file with: doveconf -n > dovecot-new.conf: 2 Time(s) srv dovecot: config: Warning: Obsolete setting in /etc/dovecot/conf.d/01-mail-stack-delivery.conf:13: listen=..:port has been replaced by service { inet_listener { port } }: 2 Time(s) srv dovecot: config: Warning: Obsolete setting in /etc/dovecot/conf.d/01-mail-stack-delivery.conf:13: protocol { listen } has been replaced by service { inet_listener { address } }: 2 Time(s) srv dovecot: config: Warning: Obsolete setting in /etc/dovecot/conf.d/01-mail-stack-delivery.conf:14: protocol { ssl_listen } has been replaced by service { inet_listener { address } }: 2 Time(s) srv dovecot: config: Warning: Obsolete setting in /etc/dovecot/conf.d/01-mail-stack-delivery.conf:14: ssl_listen=..:port has been replaced by service { inet_listener { port } }: 2 Time(s) srv dovecot: config: Warning: Obsolete setting in /etc/dovecot/conf.d/01-mail-stack-delivery.conf:21: listen=..:port has been replaced by service { inet_listener { port } }: 2 Time(s) srv dovecot: config: Warning: Obsolete setting in /etc/dovecot/conf.d/01-mail-stack-delivery.conf:21: protocol { listen } has been replaced by service { inet_listener { address } }: 2 Time(s) srv dovecot: config: Warning: Obsolete setting in /etc/dovecot/conf.d/01-mail-stack-delivery.conf:22: protocol { ssl_listen } has been replaced by service { inet_listener { address } }: 2 Time(s) *The "01-mail-stack-delivery.conf" file looks like this:* # Some general options protocols = imap pop3 sieve disable_plaintext_auth = yes ssl = yes ssl_cert = </etc/ssl/certs/ssl-mail.pem ssl_key = </etc/ssl/private/ssl-mail.key ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM mail_location = maildir:~/Maildir auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ # IMAP configuration protocol imap { listen = *:143 ssl_listen = *:993 mail_max_userip_connections = 10 imap_client_workarounds = delay-newmail } # POP3 configuration protocol pop3 { listen = *:110 ssl_listen = *:995 mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } # LDA configuration protocol lda { postmaster_address = postmaster mail_plugins = sieve quota_full_tempfail = yes deliver_log_format = msgid=%m: %$ rejection_reason = Your message to <%t> was automatically rejected:%n%r } # Plugins configuration plugin { sieve=~/.dovecot.sieve sieve_dir=~/sieve } # Authentication configuration auth_mechanisms = plain login service auth { # Postfix smtp-auth unix_listener /var/spool/postfix/private/dovecot-auth { mode = 0660 user = postfix group = postfix } } What is going wrong with Dovecote. I am a newcomer and i need little help. Many thanks, Tom Greece -- View this message in context: http://dovecot.2317879.n4.nabble.com/Dovecote-Warnings-tp39221.html Sent from the Dovecot mailing list archive at Nabble.com.

2 3

[Dovecot] More detail re dovecot-uidlist and -uidvalidity files
by Dale Gallagher 13 Dec '12

13 Dec '12

Regarding the dovecot-uidlist header (first line) - I've tried to search for and figure out what exactly is meant by the "mailbox global uid" and once I do, how to manually generate the 128 bit hex variation of it? Could someone elaborate on this, please. How would omitting the global uid field, beginning with G, affect remote clients' syncing of mail? Is this field mandatory? Would "3 V$uid_validity N$next_uid" be sufficient to ensure that clients don't re-download everything? I also see that Dovecot's dovecot-uidvalidity is of the form 4df8a4e2, whereas the IMAP syncing utility which I'm using (isync) uses an integer. I'd appreciate it if someone could elaborate on what Dovecot uses and whether I need to convert one to the other (ie. after syncing with isync, do I need to convert it to work with Dovecot? Thanks.

2 1

Re: [Dovecot] number of imap connection
by Joseph Tam 13 Dec '12

13 Dec '12

<klimenko.n(a)theitidea.ru> writes: > how to calculate the expected number of imap processes? Set your mail_max_userip_connections to a large value (~20) and run "doveadm who" periodically to look at your user's actual connection counts. > how many imap processes must be used for each user? > i have 6-7 connection for each one user > is it normal behavior? It's typical. Some popular mail readers open about 5, some more, some less. I set my mail_max_userip_connections at 12 even though there are some users who regularly bump up against this. They don't seem to notice -- dovecot probably bumps off the least recently used connection and their mail reader reconnects if it needs to open that mailbox again. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] number of imap connection
by Николай Клименко 13 Dec '12

13 Dec '12

Hi to all. how to calculate the expected number of imap processes? how many imap processes must be used for each user? i have 6-7 connection for each one user is it normal behavior? thx.

3 2

[Dovecot] rare ssl issue
by Eduardo Casarero 12 Dec '12

12 Dec '12

I'am having a rare situation with ssl connections. I can connect to 993/995 but the connection never starts. >From the client side i test with: $ openssl s_client -connect example.com:993 CONNECTED(00000003) and stays like that... waiting. In the other side i see in dovecot logs: Disconnected: Inactivity (no auth attempts): rip=x.x.x.x, lip=x.x.x.x, TLS handshaking this happens from some networks only, so i think that mi isp (where the server is hosted) is doing some kind of shaping. But if i try to connect to port 465 for example, or 443 it works like a charm. i am talking to my isp, but i thougth that someone may have a hint or any comment that could help. regards, eduardo.

1 0

[Dovecot] [vnd.dovecot.pipe] - timeout settings
by kjonca＠o2.pl 12 Dec '12

12 Dec '12

In install file we can read that: sieve_<extension>_exec_timeout = 10s set timeout for executing program. But regardless of setting this value (say sieve_pipe_exec_timeout=86000) I got: --8<---------------cut here---------------start------------->8--- 2012-12-10 20:55:33 LDA(kjonca): Debug: sieve: action pipe: running program: maildrop.sh 2012-12-10 20:55:43 LDA(kjonca): Debug: program `/home/kjonca/sieve/bin/maildrop.sh' execution timed out: sending TERM signal --8<---------------cut here---------------end--------------->8--- What am I doing wrong? KJ -- http://modnebzdury.wordpress.com/2009/10/01/niewiarygodny-list-prof-majewsk… When does summertime come to Minnesota, you ask? Well, last year, I think it was a Tuesday.

2 1