- dovecot - dovecot.org

[Dovecot] Using getmail with sieve
by Orr, Steve 28 Mar '12

28 Mar '12

I'm trying to setup a personal "mailmover" where I use getmail to retrieve remote IMAP server mail and load it into my local Dovecot then filter all email on the Dovecot server side with sieve. (I'm using Dovecot v. 2.0.9 with IMAP/Maildir.) 1) From the docs I gather that Dovecot sieve will not work as mail is loaded by getmail and I need to refilter the email after it has been loaded with getmail, right? 2) In http://wiki2.dovecot.org/HowTo/RefilterMail it says, "This HOWTO helps you create a folder for mail that needs refiltering..." But contrary to the doc I don't see any actual instructions about creating said folder. The HOWTO assumes mail already exists in a folder called "REFILTER' but doesn't say how this folder was populated. "How to?" 3) As a test I manually created the "REFILTER" folder and put my inbox mail in it (with Thunderbird) then following the HOWTO I ran my getmail script and my sieve script performed as expected. 4) How do I automate this? I tried a new getmail script to run against the inbox and tag new email so a subsequent getmail script could move it into the REFILTER folder for later sieve processing. This seems like way too much work. The HOWTO doc seems incomplete or presumes other knowledge, especially for an IMAP server and email sieve nubie. TIA, D. B. ---------------------------------------------- $ dovecot -n # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-131.0.15.el6.i686 i686 Red Hat Enterprise Linux Server release 6.1 (Santiago) log_path = /var/log/dovecot managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mbox_write_locks = fcntl passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } postmaster_address = test@host1 protocols = imap lmtp service lmtp { user = test } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } protocol lmtp { mail_plugins = " sieve" } protocol lda { mail_plugins = " sieve" }

1 0

[Dovecot] Dovecot upgrade from 1.2.x to 2.0.x: roundcube/squirrelmail sent folder doesn't work any more
by Gerhard Wiesinger 27 Mar '12

27 Mar '12

Hello, After upgrading from 1.2.x to 2.0.x I'm having problems using sent folder in Webmail applications like roundcube mail and squirrelmail. Relevant config dovecot.conf: mail_location = mbox:~:INBOX=/var/mail/%u Different LIST behaviour from rawlog: 1.2.x: with Prefix ~/Mail A002 LIST "" "~/Mail/sent" * LIST (\NoInferiors \UnMarked) "/" "~/Mail/sent" A002 OK List completed. 2.0.x: with Prefix ~/Mail A0003 LIST "" ~/Mail/sent A0003 OK List completed.: Configured prefix for private spaces in roundcube mail is ~/Mail . Roundcube Webmail application checks for existence of the folder but dovecot doesn't return anything in 2.x.latest. Is this by design? Any ideas to fix it by configuration? (I tried prefix Mail/ in roundcube mail without success) Thunderbird works well. Thnx. Ciao, Gerhard

1 0

[Dovecot] Problem with DOVECOT - long authentication time
by Jacek Kowalski 27 Mar '12

27 Mar '12

Hi all, I want to start new server with Postfix (I still have qmail ) and I think I have a problem with authentication in dovecot - it takes 3 seconds. Is this normal time? My configuration: Usernames: from MySQL Passwords: from Active Directory dovecot -n # 1.1.20: /etc/dovecot.conf # OS: Linux 2.6.18-274.7.1.el5 i686 CentOS release 5.7 (Final) ext3 log_path: /var/log/dovecot.log protocols: pop3 pop3s imap imaps listen: * ssl_cert_file: /etc/pki/tls/certs/iRedMail_CA.pem ssl_key_file: /etc/pki/tls/private/iRedMail.key login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_uid: 500 mail_gid: 500 mail_location: maildir:/xxx/%u:INDEX=/xxx/%u mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota zlib mail_plugins(imap): quota imap_quota zlib mail_plugins(pop3): quota zlib mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 lda: postmaster_address: postmaster(a)domain.com mail_plugins: cmusieve quota log_path: /var/log/sieve.log auth default: mechanisms: plain login default_realm: infor.pl username_format: %Lu debug: yes debug_passwords: yes passdb: driver: pam passdb: driver: sql args: /etc/dovecot-ldap.conf userdb: driver: sql args: /etc/dovecot-mysql.conf socket: type: listen client: path: /var/spool/postfix/dovecot-auth mode: 438 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 438 user: vmail group: vmail plugin: quota_warning: storage=85%% /usr/local/bin/dovecot-quota-warning.sh 85 quota_warning2: storage=90%% /usr/local/bin/dovecot-quota-warning.sh 90 quota_warning3: storage=95%% /usr/local/bin/dovecot-quota-warning.sh 95 quota: maildir quota_rule: *:storage=300M quota_rule2: *:messages=0 expire: Trash 7 Trash/* 7 Junk 30 expire_dict: proxy::expire auth_socket_path: /var/run/dovecot/auth-master sieve: /xxx/sieve/%Ld/%Ln/dovecot.sieve dict: expire: db:/xxx/expire.db grep -v '^ *$#.*$\?$' dovecot-mysql.conf driver = mysql default_pass_scheme = CRYPT connect = host=localhost dbname=xxx user=xxx password=xxx #password_query = SELECT password FROM mailbox WHERE username='%u' AND active='1' user_query = SELECT CONCAT(storagebasedirectory, '/', storagenode, '/', maildir) AS home, CONCAT('*:bytes=', quota*1048576) AS quota_rule FROM mailbox WHERE username='%u' AND active='1' AND enable%Ls%Lc='1' postfix: postfix-2.5.9-5.ired dovecot: dovecot-1.1.20-1_98.el5 mysql: mysql-server-5.0.77-4.el5_6.6 This is not a TCP connection problem, because i have results from tcpdump and wireshark. There is a information that Active directory is answering with password in 0,2 second. Regards Jacek

1 1

[Dovecot] quota ldap
by Alain DEFRANCE 27 Mar '12

27 Mar '12

hello all, i'm using quota + ldap with dovecot 2 in dovecot-ldap.conf.ext file i have the line : user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid,quota=quota_rule=*:storage=%$B how can i add "Trash:storage= " to have more place for deleting messages like in 90-quota.conf file ? quota_rule2 = Trash:storage thanks for help regards -- *Alain DEFRANCE* - Ingénieur systèmes et réseaux Direction des systèmes d'information (DiSI) Centre d'Exploitation des Infrastructures Informatiques (CEDII) Cellule Réseau et Expertise Systèmes Bât Ile de France - RDC - Bureau 58 Université d'Evry Val d'Essonne 4, Bd F. Mitterrand - 91025 EVRY Cedex Tel : 01.69.47.80.69 - Fax : 01.69.47.80.24 Mail : alain.defrance(a)univ-evry.fr Site UEVE : http://www.univ-evry.fr

2 3

[Dovecot] Dovecot IMAP is broken after upgrade from 2.1.2 to 2.1.3
by Michael Neubert 27 Mar '12

27 Mar '12

Hello, I just upgraded my servers from Dovecot 2.1.2 to Dovecot 2.1.3-0~auto+5 by using Debian binaries from "http://xi.rename-it.nl/debian/ stable-auto/dovecot-2.1 main". The config was not touched but now IMAP connections are not possible anymore (LMTP works fine). When I try to connect to a mailbox, the connect fails. Some log entries: ############################################################################################################### Mar 23 21:45:28 imap-login: Warning: SSL: where=0x10, ret=1: before/accept initialization [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2001, ret=1: before/accept initialization [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv2/v3 read client hello A [xxx.xxx.xxx.xxx] Mar 23 21:45:28 auth: Debug: auth client connected (pid=3431) Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 read client hello A [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write server hello A [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write certificate A [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write key exchange A [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write server done A [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 flush data [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv3 read client certificate A [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv3 read client certificate A [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 read client key exchange A [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 read finished A [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write session ticket A [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write change cipher spec A [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write finished A [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 flush data [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x20, ret=1: SSL negotiation finished successfully [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap-login: Warning: SSL: where=0x2002, ret=1: SSL negotiation finished successfully [xxx.xxx.xxx.xxx] Mar 23 21:45:28 auth: Debug: client in: AUTH 1 PLAIN service=imap secured lip=yyy.yyy.yyy.yyy rip=xxx.xxx.xxx.xxx lport=993 rport=51379 Mar 23 21:45:28 auth: Debug: client out: CONT 1 Mar 23 21:45:28 auth: Debug: client in: CONT 1 AG5lbWlAdmlzaXQtd29ybGQuZGUAUHJvNDUwLnN1 Mar 23 21:45:28 auth-worker(3433): Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Mar 23 21:45:28 auth-worker(3433): Debug: Module loaded: /usr/lib/dovecot/modules/auth/libdriver_mysql.so Mar 23 21:45:28 auth-worker(3433): Info: mysql(zzz.zzz.zzz.zzz): Connected to database dovecot Mar 23 21:45:28 auth-worker(3433): Debug: sql(username,xxx.xxx.xxx.xxx): query: SELECT password, 'directory' AS userdb_home, 'mail' AS userdb_uid, 'mail' AS userdb_gid FROM users WHERE username = 'username' AND domain = 'domain' AND active = 'Y' Mar 23 21:45:28 auth: Debug: client out: OK 1 user=username Mar 23 21:45:28 auth: Debug: master in: REQUEST 2286813185 3394 1 4727968fd3514dd45f623ad9f944e305 Mar 23 21:45:28 auth-worker(3433): Debug: sql(username,xxx.xxx.xxx.xxx): SELECT home, uid, gid FROM users WHERE username = 'username' AND domain = 'domain' Mar 23 21:45:28 auth: Debug: master out: USER 2286813185 username home=directory uid=8 gid=8 Mar 23 21:45:28 imap-login: Info: Login: user=<username>, method=PLAIN, rip=xxx.xxx.xxx.xxx, lip=yyy.yyy.yyy.yyy, mpid=3434, TLS Mar 23 21:45:28 imap-login: Warning: SSL alert: where=0x4008, ret=256: warning close notify [xxx.xxx.xxx.xxx] Mar 23 21:45:28 imap(username): Info: Connection closed in=0 out=303 ############################################################################################################### The MySQL authentification seems to work fine, but after this the connection is closed with the SSL alert. In Dovecot 2.1.2 everything worked fine. The SSL certifcate is also correct. Any hints are welcome to identify the problem. Thanks in advance. Beste wishes Michael

2 7

[Dovecot] Error: Couldn't create namespace 'Share/' Dovecot 2.1.3 ldap
by Tomislav Mihalicek 27 Mar '12

27 Mar '12

Mar 26 16:38:58 cartman dovecot: imap(miha(a)example.com): Error: Couldn't create namespace 'Share/' for user miha-share(a)example.com: userdb didn't return a home directory, but location used it (%h): maildir:%%h/Maildir:INDEX=%h/index/Shared/%%u Where is the problem, the same config worked with Dovecot 1.2.x -- View this message in context: http://old.nabble.com/Error%3A-Couldn%27t-create-namespace-%27Share-%27-Dov… Sent from the Dovecot mailing list archive at Nabble.com.

2 2

[Dovecot] dovecot-1.2.9: OK No messages copied
by Attila Sipos 26 Mar '12

26 Mar '12

Hi, When I issue an IMAP copy command using the wrong UID, the server gives an "OK No messages copied" response. This seems like the wrong response to me. If the UID doesn't exist, then it should respond with a "No" response - maybe something like "NO - copy error: bad UID" I believe "OK No messages copied" would only be a suitable response if the email with the supplied UID had already been known to be copied successfully. I am using dovecot 1.2.9 - has this been fixed in newer versions of dovecot? Regards Attila Attila Sipos Netcall Telecom Ltd Registered in England 2831215. Registered Office : 3rd Floor, Hamilton House, 111 Marlowes, Hemel Hempstead, Herts, HP1 1BB

2 7

[Dovecot] Many messages clustered around the same date.saved value
by Joseph Tam 26 Mar '12

26 Mar '12

Subject: Different user messages clustered around the same date.saved value After updating dovecot to 2.1.3, I can now use "doveadm expunge -A ..." to iterate through all user trash folders and expunge old messages. However, I noticed a strange thing: querying what would have been deleted doveadm -ftab fetch -A "date.saved" mailbox Trash savedbefore 7d showed many date.saved values are clustered around the same timestamp, even among different user's Trash mailbox. One user's trash mailbox having the same date.saved is explained by a user deleting a lot of message at one time, but I can't explain why many different users would have messages with the same (or closeby) date.saved value. For example, the output of the above query on my system showed the 10s window /2012-03-05 18:08:0[0-9]/ matched 7658 messages among 22 different user Trash mailboxes, which is statistically unlikely. I did't see anything special in the dovecot logs at this time to explain this. What would cause this? Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] dovecot.log warning
by Jitendra Bhaskar 26 Mar '12

26 Mar '12

Hi Guys, Just I installed dovecot-2.1.0 in centos 5.7. and did copy of all user data i.e home directory and mail data from previous server which was on dovecot 1.2.8 to new one. Every thing is working fine. Mails are going and coming. But in dovecot.log file I an getting like imap(user@example.com):Warning: fscking index file /home/ example.com/user/mail/.imap/VISA/dovecot.index Can any one specify why its coming and how can I fix it ? -- * Thanks & Regards * *Jitendra Kumar Bhaskar* Cell:- +91 7306311531 +91 8102997821

2 1

[Dovecot] delivering with maildrop
by Radim Kolar 26 Mar '12

26 Mar '12

Can somebody provide maildrop syntax for using deliver-lda as final delivery program during sorting mail in user mailfilter? i mean replacement for "to" statement if ( /^(To|Cc):.*dovecot@dovecot.org/:h ) { to $MAIL/.dovecot/ }

3 3