- dovecot - dovecot.org

[Dovecot] Director and CRAM-MD5
by Martin Spuetz 20 Oct '10

20 Oct '10

Hello, i have a setup with two director servers pointing to two backends. I don't care that much for load balancing, my main goal is high availability. CRAM-MD5 auth is working fine if I connect directly to the backends, but the director only supports AUTH=PLAIN because of the static passdb. director config: > passdb { > driver = static > args = nopassword=y proxy=y > } > > director_servers = director1 director2 > director_mail_servers = backend1 backend2 backend config: > passdb { > driver = vpopmail > args = > } > > userdb { > driver = vpopmail > } It seems that the director is only working, if I use the static passdb?! How can I use the director with other passdb drivers than the static one? Greetings, Martin

2 6

[Dovecot] 2.0.3 crashes
by Mike Abbott 20 Oct '10

20 Oct '10

One system running dovecot-2.0.3 assert-crashed in a few ways recently. I know 2.0.3 < 2.0.5 but these have not been reported (or, presumably, fixed) since 2.0.3. Here are some logs: Fri Oct 15 21:50:00 server3 dovecot[349]: lda(pid 349 user user10): Error: Transaction log file /Volumes/mail/user10/dovecot.index.log: marked corrupted Fri Oct 15 21:50:00 server3 dovecot[348]: lda(pid 348 user user10): Error: Transaction log file /Volumes/mail/user10/dovecot.index.log: marked corrupted Fri Oct 15 21:50:00 server3 dovecot[348]: lda(pid 348 user user10): Error: Corrupted index file /Volumes/mail/user10/dovecot.index: messages_count too large (329591 > 329505) Fri Oct 15 21:50:00 server3 dovecot[348]: lda(pid 348 user user10): Warning: fscking index file /Volumes/mail/user10/dovecot.index Fri Oct 15 21:50:00 server3 dovecot[348]: lda(pid 348 user user10): Error: Fixed index file /Volumes/mail/user10/dovecot.index: log_file_seq 840 -> 841 Fri Oct 15 21:50:00 server3 dovecot[349]: lda(pid 349 user user10): Error: Corrupted index file /Volumes/mail/user10/dovecot.index: messages_count too large (329591 > 329505) Fri Oct 15 21:50:00 server3 dovecot[349]: lda(pid 349 user user10): Warning: fscking index file /Volumes/mail/user10/dovecot.index Fri Oct 15 21:50:00 server3 dovecot[349]: lda(pid 349 user user10): Error: Fixed index file /Volumes/mail/user10/dovecot.index: log_file_seq 840 -> 841 Fri Oct 15 21:50:06 server3 dovecot[348]: lda(pid 348 user user10): Error: Fixed index file /Volumes/mail/user10/dovecot.index: messages_count 329591 -> 329505 Fri Oct 15 21:50:06 server3 dovecot[349]: lda(pid 349 user user10): Error: Fixed index file /Volumes/mail/user10/dovecot.index: messages_count 329591 -> 329505 Fri Oct 15 21:50:07 server3 dovecot[349]: lda(pid 349 user user10): Error: Index /Volumes/mail/user10/dovecot.index: Lost log for seq=1 offset=0 Fri Oct 15 21:50:07 server3 dovecot[349]: lda(pid 349 user user10): Warning: fscking index file /Volumes/mail/user10/dovecot.index Fri Oct 15 21:50:07 server3 dovecot[349]: lda(pid 349 user user10): Error: Fixed index file /Volumes/mail/user10/dovecot.index: log_file_seq 1 -> 841 Fri Oct 15 21:50:07 server3 dovecot[349]: lda(pid 349 user user10): Panic: file mail-index-write.c: line 59 (mail_index_recreate): assertion failed: (map->hdr.indexid == index->indexid) Fri Oct 15 21:50:07 server3 dovecot[349]: lda(pid 349 user user10): Error: Raw backtrace: 2 libdovecot.0.dylib 0x00000001005d3887 i_set_failure_file + 241 -> 3 libdovecot.0.dylib 0x00000001005d2d50 i_syslog_error_handler + 0 -> 4 libdovecot.0.dylib 0x00000001005d3040 i_debug + 0 -> 5 libdovecot-storage.0.dylib 0x0000000100515f9d mail_index_set_fsync_mode + 0 -> 6 libdovecot-storage.0.dylib 0x0000000100503146 mail_index_fsck + 3214 -> 7 libdovecot-storage.0.dylib 0x000000010050c355 mail_index_sync_map + 370 -> 8 libdovecot-storage.0.dylib 0x000000010050481c mail_index_map + 2629 -> 9 libdovecot-storage.0.dylib 0x000000010051676d mail_index_refresh + 90 -> 10 libdovecot-storage.0.dylib 0x0000000100516ab7 mail_index_open + 296 -> 11 libdovecot-storage.0.dylib 0x0000000100532d32 index_storage_mailbox_open + 208 -> 12 libdovecot-storage.0.dylib 0x000000010053cc0f maildir_get_uidvalidity_next + 2042 -> 13 libdovecot-storage.0.dylib 0x000000010053cc5e maildir_get_uidvalidity_next + 2121 -> 14 lib20_zlib_plugin.so 0x00000001006b9932 zlib_plugin_deinit + 2731 -> 15 libdovecot-storage.0.dylib 0x00000001004f578c mailbox_create_fd + 596 -> 16 libdovecot-lda.0.dylib 0x00000001005a809a mail_deliver_save_open + 263 -> 17 libdovecot-lda.0.dylib 0x00000001005a846f mail_deliver_save + 146 -> 18 libdovecot-lda.0.dylib 0x00000001005a877a mail_deliver + 131 -> 19 dovecot-lda 0x00000001004e9341 main + 2577 -> 20 dovecot-lda 0x00000001004e8928 start + 52 Fri Oct 15 21:50:10 server3 dovecot[348]: lda(pid 348 user user10): Error: rename(/Volumes/mail/user10/dovecot.index.tmp, /Volumes/mail/user10/dovecot.index) failed: No such file or directory Fri Oct 15 21:50:10 server3 dovecot[348]: lda(pid 348 user user10): Error: unlink(/Volumes/mail/user10/dovecot.index.tmp) failed: No such file or directory Fri Oct 15 21:50:10 server3 dovecot[348]: lda(pid 348 user user10): Error: Index (in-memory index): Lost log for seq=1 offset=0 Fri Oct 15 21:50:10 server3 dovecot[348]: lda(pid 348 user user10): Warning: fscking index file (in-memory index) Fri Oct 15 21:50:10 server3 dovecot[348]: lda(pid 348 user user10): Error: Fixed index file (in-memory index): log_file_seq 1 -> 842 Fri Oct 15 21:50:18 server3 dovecot[348]: lda(pid 348 user user10): Panic: file mail-transaction-log.c: line 133 (mail_transaction_log_close): assertion failed: (log->files == NULL) Fri Oct 15 21:50:18 server3 dovecot[348]: lda(pid 348 user user10): Error: Raw backtrace: 2 libdovecot.0.dylib 0x000000010aff7887 i_set_failure_file + 241 -> 3 libdovecot.0.dylib 0x000000010aff6d50 i_syslog_error_handler + 0 -> 4 libdovecot.0.dylib 0x000000010aff7040 i_debug + 0 -> 5 libdovecot-storage.0.dylib 0x000000010af40c32 mail_transaction_log_move_to_memory + 0 -> 6 libdovecot-storage.0.dylib 0x000000010af3b92a mail_index_close + 61 -> 7 libdovecot-storage.0.dylib 0x000000010af2720d mail_index_alloc_cache_index_opened + 168 -> 8 libdovecot-storage.0.dylib 0x000000010af2729a mail_index_alloc_cache_index_opened + 309 -> 9 libdovecot-storage.0.dylib 0x000000010af14714 mail_namespace_get_storage_name + 161 -> 10 libdovecot-storage.0.dylib 0x000000010af1487e mail_namespaces_deinit + 29 -> 11 libdovecot-storage.0.dylib 0x000000010af1bef6 mail_user_alloc + 358 -> 12 lib10_quota_plugin.so 0x000000010b07c104 quota_mail_user_created + 287 -> 13 dovecot-lda 0x000000010af0e446 main + 2838 -> 14 dovecot-lda 0x000000010af0d928 start + 52 An imap process also crashed just before the above: Date/Time: 2010-10-15 21:49:43.955 -0700 Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000010 0 libdovecot-storage.0.dylib 0x000000010fc30540 mail_index_move_to_memory + 174 1 libdovecot-storage.0.dylib 0x000000010fc30b79 mail_index_open + 490 2 libdovecot-storage.0.dylib 0x000000010fc4cd32 index_storage_mailbox_open + 208 3 libdovecot-storage.0.dylib 0x000000010fc56c0f maildir_get_uidvalidity_next + 2042 4 libdovecot-storage.0.dylib 0x000000010fc56c5e maildir_get_uidvalidity_next + 2121 5 lib20_zlib_plugin.so 0x000000010fd83932 zlib_plugin_deinit + 2731 6 libdovecot-storage.0.dylib 0x000000010fc0f78c mailbox_create_fd + 596 7 imap 0x000000010fbe7891 cmd_select_full + 1818 8 imap 0x000000010fbe454a cmd_examine + 14 9 imap 0x000000010fbe9d88 client_command_input + 36 10 imap 0x000000010fbe9f04 client_command_input + 416 11 imap 0x000000010fbe9fdf client_handle_input + 134 12 imap 0x000000010fbe94e0 client_input + 118 13 libdovecot.0.dylib 0x000000010fce47e9 io_loop_handler_run + 234 14 libdovecot.0.dylib 0x000000010fce52bb io_loop_run + 56 15 libdovecot.0.dylib 0x000000010fcdaf98 master_service_run + 27 16 imap 0x000000010fbf1d6d main + 689 17 imap 0x000000010fbe17d8 start + 52 The backtraces may be obfuscated by compilation optimizations.

1 0

[Dovecot] Error: sql dict iterate question
by Robert Schetterer 20 Oct '10

20 Oct '10

Hi Timo, perhaps silly question... should i care of this ? dovecot: dict: Error: sql dict iterate: Invalid/unmapped path: shared/shared-boxes/anyone/ dovecot 2.0.5 -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 2

[Dovecot] Campo de quota en LDAP
by Antonio Perez-Aranda 20 Oct '10

20 Oct '10

En un principio, en los ldif que tenemos de los usuarios de prueba, tenemos el campo mailQuota. Sin embargo, si nos vamos a los schemas de qmail medianamente, con algo más de 3 años, se cambió mailQuota por mailQuotaSize y mailQuoatCount. Esto se debe entre otras cosas a que en la cabecera del fichero maildirsize del buzón, tenemos esta información, es decir, máximo tamaño ocupado y máximo número de mensajes. En el ldap de producción se sigue usando mailQuota? En el courier que tenemos montados aquí, misma versión y misma configuración que la existente en desbuz03, cuando no existe la quota del maildir directamente no da información sobre quota. ¿Estamos usando la quota de ldap? O al entregar un correo mediante Exim, se actualiza el fichero maildirsize con los valores de mailQuota. En este caso, podemos seguir con este comportamiento, o podemos utilizar la información que viene de ldap si no hay nada en el maildirsize.

1 1

[Dovecot] threaed ordered subject algorithm
by Antonio Perez-Aranda 20 Oct '10

20 Oct '10

We have custom plugins for squirrelmail which use thread orderedsubject, but according to capabilities dovecot only support thread by references algorithm. At present, we are using Courier with this capabilities (two algorithms are implemented). Could we use orderedsubject in dovecot?

2 1

[Dovecot] Outlook problem when deleting mails
by Ulf Jaenicke-Rößler 20 Oct '10

20 Oct '10

Hi, I'm seeking advice to solve the following "mystery": I set up an IMAP server on Ubuntu 10.04 (dovecot 1.2.9). It appears to work fine apart from one problem. A colleague is running Outlook 2007 on Vista and sometimes (sometimes very often, sometimes only occasionally) when he wants to delete mails, Outlook hangs for some time (he says about 1, 2 or 3 minutes) until it finally puts out a message box: "The server did not respond to this IMAP command before the connection was terminated" I have activated the outlook-idle workaround, but I learned that this doesn't do anything anymore, right? There's no error message in dovecot's logs. Nevertheless, today I found this around the time the error happened: 2010-10-12 17:13:02 imap-login: Info: Login: user=<user>, method=PLAIN, rip=192.168.100.53, lip=192.168.100.20 2010-10-12 17:13:03 imap-login: Info: Login: user=<user>, method=PLAIN, rip=192.168.100.53, lip=192.168.100.20 2010-10-12 17:15:07 IMAP(user): Info: Disconnected in IDLE bytes=272298/631645 2010-10-12 17:15:07 IMAP(user): Info: Disconnected: Logged out bytes=63/539 2010-10-12 17:15:07 IMAP(user): Info: Disconnected: Logged out bytes=462/47082 What exactly does "Disconnected in IDLE" mean? Could the error be related to the same time stamp? (I'm not yet sure, if it always happens this way if the error occurs) I also found "Disconnected in IDLE" for other users at other times, but no one other complained so far. Maybe, that's because most of the other users use Thunderbird ;-) Is this problem known? What could I do? Best regards Ulf

4 4

[Dovecot] Dovecot MDA creates folders for nonexisting users
by Janantha Marasinghe 20 Oct '10

20 Oct '10

Hi, I have setup postfix and dovecot and set dovecot as the LDA.my issue is that it accepts mails for non existing users and creates folders for them. Otherwise all mail delivery works fine. im using mysql for authentication. I do not see any error messages on my mail.log too. Thnks jay

2 1

[Dovecot] (Single instance) attachment storage with single-dbox
by Timo Sirainen 19 Oct '10

19 Oct '10

Just a note to myself and whoever else cares, should be added to wiki once it has its own page about this: With single-dbox messages can be copied with hard linking. This means that there can be multiple files that point to the same attachment file. The attachment is now deleted only once the mail file's link count drops to zero, so this works fine.. ..until someone goes and starts manually copying files or maybe restoring from backups or whatever, causing the hard links to be replaced with separate files having link count=1, even when there are other files pointing to the same attachment file. Now deleting this one mail will delete the attachment too early. I can't think of any other reasonable way to handle this though, so unless someon has some great ideas, I think the solution is to simply add enough warnings that message store shouldn't be accessed directly. Maybe add some import/export commands to doveadm which can be used to add a bunch of mails to storage without doing it directly on filesystem.

4 7

[Dovecot] gssapi problems (postfix sasl through dovecot, dovecot imap working fine)
by Trever L. Adams 19 Oct '10

19 Oct '10

Thanks to Timo, I have solved all but one of my problems. For back ground, I am using Samba4 as an AD. I have the userdb working from LDAP just fine and kerberos authenetication for dovecot's IMAP server working fine. The problem is using dovecot's SASL with postfix. I also have plain/login working in imap and smtp. Both use pam_krb5 through pam to authenticate clients that don't have kerberos, and for now smtp. When trying to do smtp kerberos, I get the following: postfix/smtpd[6197]: warning: CLIENT_FQDN[CLIENT_IP]: request longer than 2048: AUTH GSSAPI ... dovecot: auth: Debug: client in: AUTH#0111#011GSSAPI#011service=smtp#011nologin#011lip=SERVER_IP#011rip=CLIENT_IP#011secured#011resp=<hidden> dovecot: auth: Debug: gssapi(?,CLIENT_IP): Obtaining credentials for smtp@MAILSERVER_FQDN dovecot: auth: gssapi(?,CLIENT_IP): While processing incoming data: Unspecified GSS failure. Minor code may provide more information dovecot: auth: gssapi(?,CLIENT_IP): While processing incoming data: Invalid message type postfix/smtpd[6197]: warning: CLIENT_FQDN[CLIENT_IP]: SASL GSSAPI authentication failed: dovecot: auth: Debug: client out: FAIL#0111 # klist -k /etc/dovecot/krb5.keytab Keytab name: WRFILE:/etc/dovecot/krb5.keytab KVNO Principal ---- -------------------------------------------------------------------------- 2 imap/MAILSERVER_FQDN@DOMAIN_REALM 2 smtp/MAILSERVER_FQDN@DOMAIN_REALM The client is Thunderbird. Any help would be greatly appreciated. I have made sure that the file has proper permissions. I have regenerated the smtp cert making suer the password is accurate. I have done everything I know to try. The only thing that I am guess remains is something is broken with Thunderbird's kerberos setup for smtp. Thank you very much, Trever

1 3

[Dovecot] (no subject)
by Dead Gardens 19 Oct '10

19 Oct '10

Hello dovecot-list. I have the next problem with include option and managesieve .dovecot.sieve.log: info: started log at Oct 18 21:46:18. main_script: line 2: error: include: global location for included script 'roundcube.sieve' is unavailable (contact system administrator for more information). main_script: error: validation failed. .dovecot.sieve file content: require ["include"]; include :global "roundcube.sieve"; sieve/roundcube.sieve file content: require ["fileinto"]; # rule:[subject] if anyof (header :contains "subject" "test") { fileinto "Servers"; stop; } dovecot -n # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32.16-linode28 i686 Gentoo Base System release 2.0.1 rootfs protocols: imap imaps managesieve ssl_cert_file: /etc/ssl/dovecot/server.pem ssl_key_file: /etc/ssl/dovecot/server.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(managesieve): /usr/libexec/dovecot/managesieve-login first_valid_uid: 8 last_valid_uid: 8 first_valid_gid: 12 last_valid_gid: 12 mail_uid: 8 mail_gid: 12 mail_location: maildir:/var/vmail/%d/%n/Maildir/:INDEX=/var/vmail/%d/%n/indexes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(managesieve): /usr/libexec/dovecot/managesieve mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(managesieve): /usr/lib/dovecot/managesieve lda: postmaster_address: postmaster(a)domain.com mail_plugins: quota sieve auth default: mechanisms: plain login user: nobody passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: prefetch userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: mail group: mail plugin: sieve: ~/.dovecot.sieve sieve_dir: ~/sieve Any idea? Regards.

3 3