- dovecot - dovecot.org

Re: [Dovecot] \" character in folder name results in strange LIST
by Timo Sirainen 14 Aug '10

14 Aug '10

On 14.8.2010, at 20.52, Samuel Kvasnica wrote: > * LIST (\HasNoChildren) "/" "folder1" > * LIST (\HasNoChildren) "/" "folder2" > * LIST (\HasNoChildren) "/" {9} > six"wafer > . OK List completed. > > Note the {9} length of the following real folder name. Is this normal > handling of special folder names ? Yes. > Mail clients do not seem to like this response. What clients? They're buggy then.. Well, of course, way too many clients are :(

1 0

[Dovecot] v2.0.rc6 released
by Timo Sirainen 14 Aug '10

14 Aug '10

http://dovecot.org/releases/2.0/rc/dovecot-2.0.rc6.tar.gz http://dovecot.org/releases/2.0/rc/dovecot-2.0.rc6.tar.gz.sig I expect this to be the last release candidate. Unless release critical bugs are reported, I'll update the version number to v2.0.0 on Monday morning without any other changes. Since rc5 there have been mainly some small fixes and some error message improvements. The only (somewhat) important fixes are: - dict quota didn't always decrease quota when messages were expunged - Shared INBOX wasn't always listed with FS layout

2 1

[Dovecot] Dovecot mailing list filter update
by Timo Sirainen 14 Aug '10

14 Aug '10

I added some new filters to this list that will bounce your mail if it doesn't like it. If you think your bounced mail was legitimate, let me know and I'll look at fixing the scripts.

1 0

[Dovecot] Maildir over NFS
by CJ Keist 14 Aug '10

14 Aug '10

I'm working on bring up a new mail server to replace our current one. Our current mail server is running dovecot 1.1.16, with postfix using mbox format. User inboxes are stored locally on the mail server and all other mail folders in users home directory under mail which is NFS mounted on the mail server. For our new mail server I'm looking to switch to the Maildir format. Some years ago I remember reading that it was not recommended to run Maildir format over NFS. Now I'm looking at several posts that seem to indicate that Maildir should run fine over NFS. I'm a little concerned about running Maildir over NFS, especially from the howto conversion pages I read would move all messages over to the User ~/Maildir folder including the inbox. So having every single mail transaction going over NFS doesn't seem the smart thing to do. So question I have for the dovecot team, does running Maildir over NFS work well? Or would you recommend that all user mail folders be stored locally on the mail server when using Maildir? We have about 3400 users, doing about 30k mail deliveries daily. Some users have 10's of thousands of mail messages in hundreds of mail folders. Thanks... -- C. J. Keist Email: cj.keist(a)colostate.edu UNIX/Network Manager Phone: 970-491-0630 Engineering Network Services Fax: 970-491-5569 College of Engineering, CSU Ft. Collins, CO 80523-1301 All I want is a chance to prove 'Money can't buy happiness'

11 24

[Dovecot] quota_warning bug?
by jeroen＠intuxicated.org 13 Aug '10

13 Aug '10

Hi, Today I was testing with dovecot 2.0 rc5 and experienced some odd behaviour with quota_warning rules. It's reproducable. When I set a rule (this one simply writes some message to a text file) and go over quota (2 messages in this case), it works as expected. But if I restart my client, remove one message, restart my client again and remove the last message from my inbox, it executes the warning rule again. Does this sound familiar to anyone? I tested with the debian package dovecot_2.0.rc5-0~auto+8 found in rename-it.nl's repository. Thanks. Best regards, Jeroen Koekkoek

2 2

[Dovecot] passwd(contact@akairnet.com, 91.121.76.71): unknown user
by Kurt22 13 Aug '10

13 Aug '10

I have a probleme with my configuration of dovecot I think. I have no problem for send a email but I don't want receive a email. In my /var/log/mail.log I have : Quote: connect from mail-ww0-f45.google.com[74.125.82.45] Aug 11 14:21:58 ns351550 postfix/smtpd[1844]: NOQUEUE: reject: RCPT from mail-ww0-f45.google.com[74.125.82.45]: 550 5.1.1 <contact(a)akairnet.com>: Recipient address rejected: User unknown in local recipient table; from=<fwdavy(a)gmail.com> to=<contact(a)akairnet.com> proto=ESMTP helo=<mail-ww0-f45.google.com> Aug 11 14:21:58 ns351550 postfix/smtpd[1844]: disconnect from mail-ww0-f45.google.com[74.125.82.45] so...problem on : Log dovecot : dovecot: 2010-08-11 17:53:14 Info: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=91.121.76.71 rip=91.121.76.71 resp=AGNvbnRhY3RAYWthaXJuZXQuY29tAFgyMmRiNzgh dovecot: 2010-08-11 17:53:14 Info: auth-worker(default): sql(contact(a)akairnet.com,91.121.76.71): query: SELECT CONCAT(user.user, '@', domains.name) AS user,user.password FROM user,domains WHERE user.domain_id=domains.id AND CONCAT(user.user, '@', domains.name)='contact(a)akairnet.com' dovecot: 2010-08-11 17:53:14 Info: auth(default): client out: OK 1 user=contact(a)akairnet.com dovecot: 2010-08-11 17:53:14 Info: auth(default): master in: REQUEST 1 13716 1 dovecot: 2010-08-11 17:53:14 Info: auth(default): passwd(contact(a)akairnet.com,91.121.76.71): lookup dovecot: 2010-08-11 17:53:14 Info: auth(default): passwd(contact(a)akairnet.com,91.121.76.71): unknown user dovecot: 2010-08-11 17:53:14 Info: auth(default): master out: USER 1 contact(a)akairnet.com uid=5000 gid=5000 home=/home/var/vmail/akairnet.com/contact dovecot: 2010-08-11 17:53:14 Info: imap-login: Login: user=<contact(a)akairnet.com>, method=PLAIN, rip=91.121.76.71, lip=91.121.76.71, secured dovecot: 2010-08-11 17:53:14 Info: IMAP(contact(a)akairnet.com): Disconnected: Logged out Quote: Recipient address rejected: User unknown in local recipient table In my main.cf I have : Quote: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file = /etc/ssl/certs/postfix.pem smtpd_tls_key_file = /etc/ssl/private/postfix.pem smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_auth_only = yes # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = mail.akairnet.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = mail.akairnet.com mydestination = localhost, localhost.akairnet.com, akairnet.com #local_recipient_maps = relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128, 91.121.76.71 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all home_mailbox = Maildir/ #virtual_alias_maps = mysql:/etc/postfix/mysql-virtual_aliases.cf,mysql:/etc/postfix/mysql-virtual_aliases_comptes.cf virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual_domaines.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual_comptes.cf #virtual_mailbox_domains = mysql:/etc/postfix/mysql/virtual-mailbox-domains.cf virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 #virtual_mailbox_maps = mysql:/etc/postfix/mysql/virtual-mailbox-maps.cf #virtual_alias_maps = mysql:/etc/postfix/mysql/virtual-alias-maps.cf,mysql:/etc/postfix/mysql/email2email.cf virtual_transport = dovecot dovecot_destination_recipient_limit = 1 #smtpd_sasl_type = dovecot #smtpd_sasl_path = private/auth #smtpd_sasl_auth_enable = yes #smtpd_tls_auth_only = yes #smtpd_recipient_restrictions = permit_mynetworks,permit_auth_destination,permit_sasl_authenticated,reject_unauth_destination smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_auth_enable = yes smtpd_client_restrictions = permit_mynetworks, permit_sasl_authenticated smtpd_sender_restrictions = permit_mynetworks, permit_sasl_authenticated smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination maximal_queue_lifetime = 3d bounce_queue_lifetime = 3d In dovecot.conf for auth default I have : Quote: auth default { mechanisms = plain login passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb passwd { } userdb static { args = uid=5000 gid=5000 home=/home/var/vmail/%d/%n allow_all_users=yes } socket listen { master { # Master socket provides access to userdb information. It's typically # used to give Dovecot's local delivery agent access to userdb so it # can find mailbox locations. #path = /var/run/dovecot/auth-master #mode = 0600 # Default user/group is the one who started dovecot-auth (root) #user = #group = path = /var/run/dovecot/auth-master mode = 0600 user = vmail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } You want to help me ? :confused: -- View this message in context: http://old.nabble.com/passwd%28contact%40akairnet.com%2C91.121.76.71%29%3A-… Sent from the Dovecot mailing list archive at Nabble.com.

3 13

[Dovecot] dovecot 2.0.beta5 convert with doveconf -n -c
by Bradley Giesbrecht 12 Aug '10

12 Aug '10

Sorry if I missed the dovecot 2.0.betax managesieve sieve discussions. I have been looking in my list archive and haven't found a reference to this yet. I am trying to convert my dovecot.conf and am getting the following Fatal error: /** doveconf -n -c dovecot/dovecot.conf > dovecot.converted/dovecot.conf doveconf: Warning: Obsolete setting in dovecot/dovecot.conf:10: protocols=managesieve has been renamed to protocols=sieve doveconf: Warning: Obsolete setting in dovecot/dovecot.conf:10: protocols=imaps is no longer necessary, remove it doveconf: Warning: Obsolete setting in dovecot/dovecot.conf:10: protocols=pop3s is no longer necessary, remove it doveconf: Warning: Obsolete setting in dovecot/dovecot.conf:14: ssl_cert_file has been replaced by ssl_cert = <file doveconf: Warning: Obsolete setting in dovecot/dovecot.conf:15: ssl_key_file has been replaced by ssl_key = <file doveconf: Warning: Obsolete setting in dovecot/dovecot.conf:19: mail_executable has been replaced by service { executable } doveconf: Warning: Obsolete setting in dovecot/dovecot.conf:23: mail_executable has been replaced by service { executable } doveconf: Warning: Obsolete setting in dovecot/dovecot.conf:33: protocol managesieve {} has been replaced by protocol sieve { } doveconf: Warning: Obsolete setting in dovecot/dovecot.conf:35: listen=..:port has been replaced by service { inet_listener { port } } doveconf: Warning: Obsolete setting in dovecot/dovecot.conf:35: protocol { listen } has been replaced by service { inet_listener { address } } doveconf: Warning: Obsolete setting in dovecot/dovecot.conf:36: login_executable has been replaced by service { executable } doveconf: Warning: Obsolete setting in dovecot/dovecot.conf:37: mail_executable has been replaced by service { executable } doveconf: Warning: Obsolete setting in dovecot/dovecot.conf:39: add auth_ prefix to all settings inside auth {} and remove the auth {} section completely doveconf: Warning: Obsolete setting in dovecot/dovecot.conf:41: passdb sql {} has been replaced by passdb { driver=sql } doveconf: Warning: Obsolete setting in dovecot/dovecot.conf:44: userdb prefetch {} has been replaced by userdb { driver=prefetch } doveconf: Warning: Obsolete setting in dovecot/dovecot.conf:46: userdb sql {} has been replaced by userdb { driver=sql } doveconf: Error: protocols: Unknown protocol: sieve doveconf: Fatal: Error in configuration file dovecot/dovecot.conf: protocols: Unknown protocol: sieve /** My current dovecot.conf has these sieve related directives: /** protocols = imap imaps pop3 pop3s managesieve protocol lda { postmaster_address = postmaster(a)pixilla.com hostname = ix.databoost.com sendmail_path = /opt/local/sbin/sendmail auth_socket_path = /opt/local/var/run/dovecot/auth-master log_path = /opt/local/var/serveza/log/mail/dovecot-deliver.log mail_plugins = sieve } protocol managesieve { disable_plaintext_auth = no listen = *:2000 login_executable = /opt/local/libexec/dovecot/managesieve-login mail_executable = /opt/local/libexec/dovecot/managesieve } plugin { sieve_before = /opt/local/var/serveza/mail/filter/sieve/global/ before/ sieve = /opt/local/var/serveza/mail/filter/sieve/%d/%n/active.sieve sieve_global_path = /opt/local/var/serveza/mail/filter/sieve/ global/default.sieve sieve_dir = /opt/local/var/serveza/mail/filter/sieve/%d/%n/sieve sieve_global_dir = /opt/local/var/serveza/mail/sieve/global/ include/ sieve_after = /opt/local/var/serveza/mail/filter/sieve/global/ after/ .... } **/ I list subject addressing this would help if it's already been worked out. Regards, Bradley Giesbrecht

5 8

[Dovecot] Exim+Dovecot LDA - How can I catch the crash?
by Odhiambo Washington 12 Aug '10

12 Aug '10

Hello list I am testing mdbox with Dovecot from http://hg.dovecot.org/dovecot-2.0-sis/.and my MTA is Exim. It appears to crash, but I am not sure how to capture the actual crash. What I get in Exim logs is: 2010-07-28 19:55:13 1Oe9uT-000KmG-Oz ** /var/spool/virtual/ titan.co.ke/wash/Maildir <wash(a)titan.co.ke> R=virtual_domains T=dovecot_virtual_delivery: Child process of dovecot_virtual_delivery transport (running command "/opt/dovecot2/libexec/dovecot/deliver -d $local_part@$domain -f $sender_address") was terminated by signal 11 (segmentation fault) This crash does not happen with RC3 of Dovecot. I know I shouldn't be using bleeding edge code, but strangely enough, I need to use this one to satisfy my curiosity, and to help me learn one or two new tricks. With rc3, here is what I have in dovecot.log: mail# less /var/log/dovecot.log Jul 28 20:04:36 master: Info: Dovecot v2.0.rc3 starting up Jul 28 20:05:04 lda: Debug: Loading modules from directory: /opt/dovecot2/lib/dovecot Jul 28 20:05:04 lda: Debug: Module loaded: /opt/dovecot2/lib/dovecot/lib10_quota_plugin.so Jul 28 20:05:04 lda: Debug: auth input: wash(a)titan.co.ke home=/var/spool/virtual/titan.co.ke/wash uid=26 gid=26 quota=maildir:storage=0 Jul 28 20:05:04 lda: Debug: Added userdb setting: plugin/quota=maildir:storage=0 Jul 28 20:05:04 lda(wash(a)titan.co.ke): Debug: Effective uid=26, gid=26, home=/var/spool/virtual/titan.co.ke/wash Jul 28 20:05:04 lda(wash(a)titan.co.ke): Debug: Quota root: name=storage=0 backend=maildir args= Jul 28 20:05:04 lda(wash(a)titan.co.ke): Debug: fs: root=/var/spool/virtual/ titan.co.ke/wash/mdbox, index=, control=, inbox= Jul 28 20:05:04 lda(wash(a)titan.co.ke): Debug: Namespace : Using permissions from /var/spool/virtual/titan.co.ke/wash/mdbox: mode=0700 gid=-1 Jul 28 20:05:04 lda(wash(a)titan.co.ke): Debug: none: root=, index=, control=, inbox= Jul 28 20:05:04 auth: Debug: Loading modules from directory: /opt/dovecot2/lib/dovecot/auth Jul 28 20:05:04 auth: Debug: master in: USER 1 wash(a)titan.co.ke service=lda Jul 28 20:05:04 auth: Debug: passwd(wash(a)titan.co.ke): lookup Jul 28 20:05:04 auth: Info: passwd(wash(a)titan.co.ke): unknown user Jul 28 20:05:04 auth: Debug: master out: USER 1 wash(a)titan.co.ke home=/var/spool/virtual/titan.co.ke/wash uid=26 gid=26 quota=maildir:storage=0 Jul 28 20:05:04 auth: Debug: Loading modules from directory: /opt/dovecot2/lib/dovecot/auth Jul 28 20:05:04 auth: Info: mysql: Connected to localhost (exim4u) Jul 28 20:05:04 auth: Debug: sql(wash(a)titan.co.ke): SELECT pop AS home, 26 AS uid, 26 AS gid, CONCAT('maildir:storage=', quota*1024) AS quota FROM users WHERE username = 'wash(a)titan.co.ke' AND enabled = '1' Jul 28 20:05:04 lda(wash(a)titan.co.ke): Info: msgid=< E1OeA40-000OZ6-2O(a)mail.mediselkenya.com>: saved mail to INBOX .. while with dovecot-2.0-sis, I get: mail# less /var/log/dovecot.log Jul 28 20:08:46 master: Info: Dovecot v2.0.rc3 (8e511be90b4b) starting up Jul 28 20:08:50 lda: Debug: Loading modules from directory: /opt/dovecot2/lib/dovecot Jul 28 20:08:50 lda: Debug: Module loaded: /opt/dovecot2/lib/dovecot/lib10_quota_plugin.so Jul 28 20:08:50 auth: Debug: Loading modules from directory: /opt/dovecot2/lib/dovecot/auth Jul 28 20:08:50 auth: Debug: master in: USER 1 wash(a)titan.co.ke service=lda Jul 28 20:08:50 auth: Debug: passwd(wash(a)titan.co.ke): lookup Jul 28 20:08:50 auth: Info: passwd(wash(a)titan.co.ke): unknown user Jul 28 20:08:50 auth: Debug: Loading modules from directory: /opt/dovecot2/lib/dovecot/auth Jul 28 20:08:50 auth: Info: mysql: Connected to localhost (exim4u) Jul 28 20:08:50 auth: Debug: sql(wash(a)titan.co.ke): SELECT pop AS home, 26 AS uid, 26 AS gid, CONCAT('maildir:storage=', quota*1024) AS quota FROM users WHERE username = 'wash(a)titan.co.ke' AND enabled = '1' Jul 28 20:08:50 auth: Debug: master out: USER 1 wash(a)titan.co.ke home=/var/spool/virtual/titan.co.ke/wash uid=26 gid=26 quota=maildir:storage=0 Jul 28 20:08:50 lda: Debug: auth input: wash(a)titan.co.ke home=/var/spool/virtual/titan.co.ke/wash uid=26 gid=26 quota=maildir:storage=0 Jul 28 20:08:50 lda: Debug: Added userdb setting: plugin/quota=maildir:storage=0 Jul 28 20:08:50 lda(wash(a)titan.co.ke): Debug: Effective uid=26, gid=26, home=/var/spool/virtual/titan.co.ke/wash Jul 28 20:08:50 lda(wash(a)titan.co.ke): Debug: Quota root: name=storage=0 backend=maildir args= Jul 28 20:08:50 lda(wash(a)titan.co.ke): Debug: fs: root=/var/spool/virtual/ titan.co.ke/wash/mdbox, index=, control=, inbox= Jul 28 20:08:50 lda(wash(a)titan.co.ke): Debug: Namespace : Using permissions from /var/spool/virtual/titan.co.ke/wash/mdbox: mode=0700 gid=-1 Attached is my doveconf output. I need to find out what is killing the lda. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ "If you have nothing good to say about someone, just shut up!." -- Lucky Dube

3 11

[Dovecot] Impossible to share INBOX with other users
by Daniel Stoye 12 Aug '10

12 Aug '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, i am currently testing Dovecot 2.0 rc3 with Maildir format, and it seems _again_ impossible to share the Inbox of one user with another user. user1 shares Inbox with user2 user2 makes List command: 1 login user2 password * CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS ACL RIGHTS=texk 1 OK You are so in 2 list "" "*" * LIST (\HasNoChildren) "/" "Sent" * LIST (\HasNoChildren) "/" "Trash" * LIST (\HasNoChildren) "/" "Drafts" * LIST (\HasNoChildren) "/" "INBOX" * LIST (\Noselect \HasChildren) "/" "FremdeOrdner" * LIST (\Noselect \HasChildren) "/" "FremdeOrdner/user1" * LIST (\Noselect \HasChildren) "/" "FremdeOrdner/user1/INBOX" * LIST (\HasNoChildren) "/" "FremdeOrdner/user1/INBOX/unterInbox" * LIST (\HasNoChildren) "/" "FremdeOrdner/user1/testordner" * LIST (\HasChildren) "/" "FremdeOrdner/user1/INBOX" 2 OK List completed. The Problem is the following line: * LIST (\Noselect \HasChildren) "/" "FremdeOrdner/user1/INBOX" which causes Thunderbird NOT to subscribe and ignore INBOX of user1. There is no difference, if the shared INBOX has any subfolders. Any Ideas on how to solve this? Regards, Daniel Stoye -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.16 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkxZPmUACgkQwloC3PARqmhhQACeKOa3g9ec2G25uqYVpkp8sVlc zNYAnR6IU376m8JF2PkaXwvK7qsjC6I/ =u+IR -----END PGP SIGNATURE-----

3 8

[Dovecot] hunting timeouts
by Iv Ray 12 Aug '10

12 Aug '10

Hi guys, I inherited a Dovecot 1.0.1, which I will have to upgrade, but until then I need, if possible, to resolve a timeout. - we have about 25 IMAP users - the busiest user has about 100 000 messages (Maildir) in less than 100 folders - the mail server is on HP server with server grade 2.5" HDDs in RAID 5 - the load average of the server is low (the 5/15 minute is under 0.20) - the mail server is in-house on Gigabit Ethernet The timeout we face is that sometimes even small messages take 20-40 seconds to open (i. e. Tunderbird 2 on Windows 7). Or connection to the mail server timeouts. Could you give me a few tips where can I look in order to detect the possible reason for these timeouts. Thank you, Iv

2 2