- dovecot - dovecot.org

[Dovecot] Regenerate Index and Control Files
by John S 24 Jun '10

24 Jun '10

In a bad attempt of correcting a non-related error, I deleted, and recreated, the control and index directories; now, the only e-mail showing up, in all user mailboxes, is mail that has been delivered afterward. How do I make dovecot regenerate the control and index files so that the old e-mail shows up? John

2 1

[Dovecot] step-to-step Installation Guide
by Marcus Linnenkohl 23 Jun '10

23 Jun '10

Hello, I'm new here, and I'm from Germany, so please be patient with me because my English is not so good ;) I am searching for a Step-to-Step Guide to first-configure Dovecot. I want to create virtual Users wich can logon to my Server to a Webinterface to call theire mails. I think IMAP is the right protokoll but it should be safe, so i think IMAPs is better. Unfortunately I am not familiar with Dovecot, so I need your help. Yours sincerely Marcus -- GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01

5 5

[Dovecot] quota_set leak
by Mike Abbott 23 Jun '10

23 Jun '10

The quota plugin in 2.0.beta6 leaks 2KB "quota settings" pools. Here is a patch to plug this leak, assuming you intended the caller of quota_init to retain ownership of the quota_set. If on the other hand you intended for quota_init to assume ownership of the quota_set, then the quota_settings_deinit call belongs in quota_deinit. --- a/src/plugins/quota/quota-storage.c (beta6) +++ b/src/plugins/quota/quota-storage.c (patched) @@ -427,6 +427,7 @@ { struct quota_user *quser = QUOTA_USER_CONTEXT(user); + quota_settings_deinit(&quser->quota->set); quota_deinit(&quser->quota); quser->module_ctx.super.deinit(user); }

2 1

[Dovecot] Proxy Access (Manager/Secretary) Best Practices?
by Chris Hobbs 23 Jun '10

23 Jun '10

I've mostly got our dovecot+postfix+SOGo+openldap open source groupware replacement working the way I want it to; we're replacing GroupWise in our organization and I'm thrilled to be doing it. I'm supporting about 1,000 active staff users (and another 6,000 student accounts). I've got e-mail and calendar sharing working, and it does what it says it will do, but it is (go figure) different in concept from Proxy access under GroupWise. In GroupWise, I can give my secretary proxy access to my account and she can read all of my folders, see my calendars, and send e-mail as me. To someone that receives an e-mail or appointment request from her while she's proxied to me, there's no distinction at all. Is there a way to mimic this sort of functionality with the tools I've chosen? I've figured out that I can add additional 'mail' attributes to the secretary's record, and those addresses are available as drop-down choices in the SOGo web interface, but with the secretary's name and not the manager. Any advice will be much appreciated. And many thanks to the developers involved for writing and making available such amazingly good software. Eliminating the license fees we've been paying to Novell is allowing me to save a technician that surely would have been eliminated in budget cuts this year. Chris Chris Hobbs Director, Technology New Haven Unified School District -- This message was scanned by ESVA and is believed to be clean.

5 4

[Dovecot] expire plugin
by suzuki 23 Jun '10

23 Jun '10

Hello, I am testing expire plugin, with quota plugin enabled. When I execute expire-tool, maildirsize is not updated. Is there any solution to update maildirsize when executing expire-tool? # /usr/local/dovecot/sbin/dovecot --version 1.1.18 # /usr/local/dovecot/sbin/dovecot -n # 1.1.18: /usr/local/dovecot/etc/dovecot.conf # OS: FreeBSD 7.2-STABLE i386 base_dir: /var/run/dovecot/ syslog_facility: local4 protocols: pop3 ssl_disable: yes disable_plaintext_auth: no login_dir: /var/run/dovecot//login login_executable: /usr/local/dovecot/libexec/dovecot/pop3-login login_greeting: ready mail_max_userip_connections: 1 verbose_proctitle: yes first_valid_uid: 10026 last_valid_uid: 10026 first_valid_gid: 10026 last_valid_gid: 10026 mail_privileged_group: vmail mail_uid: 10026 mail_gid: 10026 mail_location: maildir:~/Maildir mail_debug: yes maildir_copy_preserve_filename: yes mail_executable: /usr/local/dovecot/libexec/dovecot/pop3 mail_plugins: quota expire mail_plugin_dir: /usr/local/dovecot/lib/dovecot/pop3 mail_log_max_lines_per_sec: 30 pop3_enable_last: yes pop3_reuse_xuidl: yes pop3_lock_session: yes pop3_client_workarounds: outlook-no-nuls,oe-ns-eoh lda: postmaster_address: postmaster mail_plugins: quota expire sendmail_path: /usr/local/sbin/sendmail auth_socket_path: /var/run/dovecot/auth-master auth default: verbose: yes passdb: driver: sql args: /usr/local/dovecot/etc/dovecot-sql.conf userdb: driver: sql args: /usr/local/dovecot/etc/dovecot-sql.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 user: vmail plugin: quota: maildir expire: Spam 7 expire_dict: proxy:/var/run/dovecot/dict-server:expire auth_socket_path: /var/run/dovecot/auth-master dict: expire: mysql:/usr/local/dovecot/etc/dovecot-dict-expire.conf

2 2

[Dovecot] beta6 mdbox errors
by Mike Abbott 22 Jun '10

22 Jun '10

Dovecot-2.0.beta6 sometimes terminates client connections and reports these errors: Error: Corrupted dbox file /Volumes/Mail/joe/storage/m.1 (around offset=6216579): msg header has bad magic value Error: Corrupted dbox file /Volumes/Mail/joe/storage/m.1 (around offset=6216579): uid=0 points to broken data at offset=6216579 Warning: mdbox /Volumes/Mail/joe/storage: rebuilding indexes (I set mdbox_rotate_size = 200M.) These did not appear with beta5.

2 2

[Dovecot] More Dovecot 2.0 permissions issues
by Tim Traver 22 Jun '10

22 Jun '10

Hi Timo, ok, using the latest 2.0beta6... I can't figure out the settings for the log file to have the correct permissions. When the log file is created, it is created owned by root and 0600 permissions, which doesn't allow the lda to write to it if I use different users and groups for that main config... If I then chmod the log file to 666, then everything is happy, but again, if that log file is removed and created by dovecot, it will create it back with 0600 and the lda will error and not deliver mail because of it... I was not able to find anywhere else to set the mode of the log files or the mask that is used... here is the current config : # 2.0.beta6: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.0-RELEASE-p3 i386 auth_username_format = %Lu auth_username_translation = %@ auth_verbose = yes disable_plaintext_auth = no dotlock_use_excl = yes first_valid_uid = 100 listen = * lock_method = dotlock log_path = /local/logs/dovecot.errors mail_gid = 100 mail_location = maildir:%h/Maildir mail_nfs_index = yes mail_nfs_storage = yes mail_uid = 100 mmap_disable = yes passdb { args = /bin/checkpassword_dovecot_auth driver = checkpassword } plugin { quota = maildir sieve = ~/.dovecot.sieve sieve_dir = ~/Maildir/sieve } protocols = imap pop3 managesieve quota_full_tempfail = yes service auth { unix_listener auth-userdb { mode = 0660 } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = prefetch } userdb { args = /bin/checkpassword_dovecot_deliver driver = checkpassword } verbose_proctitle = yes protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { mail_plugins = quota sieve } protocol imap { mail_plugins = quota imap_quota } Thanks, Tim.

2 3

[Dovecot] Postfix, MySQL, Dovecot LDA and alias domains
by Darek M 22 Jun '10

22 Jun '10

Hi there, I have a postfix/postfixadmin/mysql/dovecot install that was using 'virtual' for the LDA. I tried the 'dovecot' LDA to enable Sieve but ran into trouble with aliases. With domain "some-domain.com" being an alias to "somedomain.com", mail sent to *(a)somedomain.com would be delivered to the Maildir fine, but the 'dovecot' LDA tossed "unknown user" for anything sent to *(a)some-domain.com (the alias to the other domain). My dovecot.sql: driver = mysql connect = host=/var/lib/mysql/mysql.sock dbname=postfix user=dovecot password=dovecot user_query = SELECT concat('/home/vmail/', maildir) as home, concat('maildir:/home/vmail/', maildir) as mail, 5000 AS uid, 5000 AS gid, concat('maildir:storage=', quota) AS quota FROM mailbox WHERE username = '%u' AND active = '1' password_query = SELECT username as user, password, concat('/home/vmail/', maildir) as userdb_home, concat('maildir:/home/vmail/', maildir) as userdb_mail, 5000 as userdb_uid, 5000 as userdb_gid FROM mailbox WHERE username = '%u' AND active = '1' The problem is fairly simple: Dovecot isn't being told anything about the 'alias_domain' table that pairs alias domains with actual ones. So the question is: do I add a second "user_query" in dovecot.sql, or is there an "alias_query" directive, or similar? And does anyone have a query that would point an alias domain to the real maildir? - Darek

3 6

[Dovecot] Outlook problem
by Patric Falinder 22 Jun '10

22 Jun '10

Hi, I have some problems that every time I start Outlook and retrieve my e-mails and then later tries to do it on my iPhone for example, I get some sort of problem that I can't get the mails. I searched around on the wiki and found the "outlook-no-nuls" and "outlook-idle" options, but where am I suppose to add them? I only have "pop3_uidl_format = %08Xu%08Xv" in my "protocol pop3 {}" and it didn't work to add it to a new line there. Thanks, Patric

2 1

[Dovecot] imap acl write tb3 plugin dovecot2 vs XMAILBOXINFO
by Robert Schetterer 22 Jun '10

22 Jun '10

Hi Timo, i played a little bit with an experimental tb3 imap acl write extension https://addons.mozilla.org/de/thunderbird/addon/176736/ with dovecot2 got errors like XMAILBOXINFO: Unknown command any idea? -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 7