- dovecot - dovecot.org

[Dovecot] "forgot my password" feature
by Mustafa Cagatayli 28 Jun '10

28 Jun '10

Hi, We have a mail server with the postfix/Squirrelmail/Dovecot(v.1.1.11) combination which we have user data on MySQL as virtual users. We have configured the SquirrelMail interface so that users can now change their own passwords. Is there any opensource solution to provide "self service password management" which would allow us to add the "I forgot my password. Lets reset it" feature which would do the authentication with the help of some random personal data or personal question/answer combination ? Regards. -- Mustafa Çağataylı BİM

1 0

[Dovecot] SASL EXTERNAL docs?
by Patrick Ben Koetter 28 Jun '10

28 Jun '10

The wiki says Dovecot supports SASL EXTERNAL as of version 1.2. I couldn't find any documentation telling me how I would configure SASL EXTERNAL. Is there any? p@rick -- state of mind Digitale Kommunikation http://www.state-of-mind.de Franziskanerstraße 15 Telefon +49 89 3090 4664 81669 München Telefax +49 89 3090 4666 Amtsgericht München Partnerschaftsregister PR 563

2 1

[Dovecot] importing outlook express messages to dovecot imap server
by Angelo Chen 26 Jun '10

26 Jun '10

Hi, I have a local Dovecot 1.1.4 running. I have a big number of outlook express messages that I like to put into Maildir so that I can use Dovecot's imap to access. I can convert them into mbox format. any available means for me to import outlook express/mbox messages into Maildir/Dovecot? command line will be preferred, Thanks, Angelo

8 20

Re: [Dovecot] dovecot evaluation on a 30 gb mailbox
by Eric Shubert 26 Jun '10

26 Jun '10

Rajesh M wrote: >> Rajesh M wrote: >>>> Rajesh M wrote: >>>>> eric >>>>> >>>>> i studied LDA a bit >>>> > >>>>> if i use lda that means all my 5000+ users' email index files will be >>>>> continuously updated when every email arrives -- means a lot of writes >>>>> to >>>>> disk ... is that correct ? >>>> Yes, but I think you make it sound worse than it is. Updating the index >>>> as each email arrives doesn't involve rebuilding the whole index like >>>> what happens at login. It only updates what's there instead of >>>> rebuilding the whole thing. I can't speak from experience, but I expect >>>> that it's very efficient, and you'll never notice any increased load on >>>> the machine. Perhaps the equivalent of adding journaling to a >>>> filesystem. You can ask the dovecot list to verify this. >>>> >>>> Also, it just occurred to me that if you're using ext3, you should be >>>> sure to optimize the filesystem. Off hand, I'd use the noatime and >>>> nodiratime mount options (man mount) and dir_index filesystem option >>>> (man tune2fs). >>>> >>>>> if yes then i dont want that since only around 200 or so people out of >>>>> the >>>>> above 5000 use webmail. >>>> Just to be clear, it affects all imap usage, not only webmail (although >>>> your uses may not use imap other than webmail). >>>> >>>>> i will study a some more and revert >>>> I hope you can figure a way to try this out. I expect that QMT's move >>>> to >>>> dovecot in the future will include the deliver LDA, and your work here >>>> will be a big help getting us there. >>>> >>>> Let me know if I can be of any further help. >>>> >>>> -- >>>> -Eric 'shubes' >>>> >>> >>> hi eric >>> >>> few questions >>> >>> i wil enable lda exclusively for this one 30 gb email box using .qmail >>> file see the performance improvement .. is that ok ? >> I believe that would be fine. >> >>> can i safely enable atime for this user maildir ? >> Sure. That's simply a performance consideration. I don't believe that >> atime is used for much of anything, so either atime or noatime is safe. >> noatime is just a little faster because the inode (where that piece of >> information is stored) doesn't need to be updated each time a file is >> accessed. >> >>> thanks for your help >> Sure. I'm eager to see your results. >> >> -- >> -Eric 'shubes' >> > > > hi eric > > this is what i plan to do > > as per > http://wiki.dovecot.org/LDA/Qmail > > i need to enter the following line in a .qmail file under the Maildir > directory of the user > |/var/qmail/bin/preline -f /usr/local/libexec/dovecot/deliver -d $EXT@$USER the location is /usr/libexec/dovecot/deliver on my system. > i would add an email forward using qmailadmin web interface (which creates > the .qmail file) and then manually edit the .qmail file and put the above > line in it (so that ownership and permissions are taken care off) That sounds ok. The permissions/ownership I'm seeing on .qmail files is: -rw------- 1 vpopmail vchkpw 101 Mar 26 2008 .qmail > now i would also need to edit the dovecot.conf file > could you guide me on what changes do i need to dovecot.conf file ? Others on this list would be more help than me regarding this. From the looks of it though (after browsing the dovecot.conf file, which is well documented btw) I don't think you'd need to change a thing. We'll certainly find out if that's the case or not. I'd just give it a go. Perhaps on a test account initially. ;) -- -Eric 'shubes'

2 1

[Dovecot] Pigeonhole Managesieve issue with Dovecot 2.0
by Tim Traver 26 Jun '10

26 Jun '10

Hi all, ok, I am running version v2.0.beta6 and the latest pigeonhole build to run managesieve and the sieve delivery filters... I am getting the following response from the managesieve port when connecting : Escape character is '^]'. "IMPLEMENTATION" "Dovecot" "SIEVE" "" "SASL" "PLAIN" "STARTTLS" "VERSION" "1.0" OK "Dovecot ready." But, I think that the SIEVE line is suppose to have all of the supported sieve functions like so : "SIEVE" "comparator-i;ascii-numeric fileinto reject vacation imapflags notify include envelope body relational regex subaddress copy" I modified the dovecot sieve config file to try and add (although they should all be added by default), and it still comes up blank... Am I missing something? what might cause it to not broadcast the sieve implementations that it has? Thanks, Tim.

2 2

[Dovecot] auth_cache_size
by Daniel L. Miller 25 Jun '10

25 Jun '10

I was going to ask how much space I should allocate for auth_cache_size - but decided to read the wiki first. Now I'll be more specific - Wiki says about 50 bytes per passdb, and up to 200 bytes for userdb - so my arithmetic says each combined entry needs 250 bytes budgeted. Assuming that's correct, I need some clarification. Let's start small. Assume ten users, all connected - and everybody also likes looking at everybody else's mailbox. So there are ten clients, each with at least ten connections (I say at least because each folder viewed within an account is its own connection, right?). How is the auth_cache used? If I have ten user/pass combinations - is that all that is stored? Or are there connection-specific entries as well? In other words, for the above example, do I have 10 x 250 bytes yields auth_cache_size=3, or do I need 10 x 10 x 250 yields auth_cache_size=30 - or am I totally off? -- Daniel

2 1

Re: [Dovecot] dovecot evaluation on a 30 gb mailbox
by Rajesh M 25 Jun '10

25 Jun '10

> Rajesh M wrote: >>> Rajesh M wrote: >>>> eric >>>> >>>> i studied LDA a bit >>> > >>>> if i use lda that means all my 5000+ users' email index files will be >>>> continuously updated when every email arrives -- means a lot of writes >>>> to >>>> disk ... is that correct ? >>> Yes, but I think you make it sound worse than it is. Updating the index >>> as each email arrives doesn't involve rebuilding the whole index like >>> what happens at login. It only updates what's there instead of >>> rebuilding the whole thing. I can't speak from experience, but I expect >>> that it's very efficient, and you'll never notice any increased load on >>> the machine. Perhaps the equivalent of adding journaling to a >>> filesystem. You can ask the dovecot list to verify this. >>> >>> Also, it just occurred to me that if you're using ext3, you should be >>> sure to optimize the filesystem. Off hand, I'd use the noatime and >>> nodiratime mount options (man mount) and dir_index filesystem option >>> (man tune2fs). >>> >>>> if yes then i dont want that since only around 200 or so people out of >>>> the >>>> above 5000 use webmail. >>> Just to be clear, it affects all imap usage, not only webmail (although >>> your uses may not use imap other than webmail). >>> >>>> i will study a some more and revert >>> I hope you can figure a way to try this out. I expect that QMT's move >>> to >>> dovecot in the future will include the deliver LDA, and your work here >>> will be a big help getting us there. >>> >>> Let me know if I can be of any further help. >>> >>> -- >>> -Eric 'shubes' >>> >> >> >> hi eric >> >> few questions >> >> i wil enable lda exclusively for this one 30 gb email box using .qmail >> file see the performance improvement .. is that ok ? > > I believe that would be fine. > >> can i safely enable atime for this user maildir ? > > Sure. That's simply a performance consideration. I don't believe that > atime is used for much of anything, so either atime or noatime is safe. > noatime is just a little faster because the inode (where that piece of > information is stored) doesn't need to be updated each time a file is > accessed. > >> thanks for your help > > Sure. I'm eager to see your results. > > -- > -Eric 'shubes' > hi eric this is what i plan to do as per http://wiki.dovecot.org/LDA/Qmail i need to enter the following line in a .qmail file under the Maildir directory of the user |/var/qmail/bin/preline -f /usr/local/libexec/dovecot/deliver -d $EXT@$USER i would add an email forward using qmailadmin web interface (which creates the .qmail file) and then manually edit the .qmail file and put the above line in it (so that ownership and permissions are taken care off) now i would also need to edit the dovecot.conf file could you guide me on what changes do i need to dovecot.conf file ? rajesh

1 0

[Dovecot] Work with auth socket
by Неворотин Вадим 24 Jun '10

24 Jun '10

I need to use Dovecot auth socket from my perl script to validate user's passwords (for jabber server). Is there any information about how to communicate with dovecot auth socket?

2 2

[Dovecot] LMTP SIZE Option
by Paul Freeman 24 Jun '10

24 Jun '10

Hi Timo, Are there any plans to support the SIZE option in the lmtp server? Paul

5 7

[Dovecot] Fw: Re: step-to-step Installation Guide
by Spyros Tsiolis 24 Jun '10

24 Jun '10

XMail is not bad either. Strictly command-line oriented but very powerfull (if you want my opinion anyway). http://www.xmailserver.org I've been using it for almost a decade now (!) s. --- On Wed, 23/6/10, Charles Marcus <CMarcus(a)Media-Brokers.com> wrote: > From: Charles Marcus <CMarcus(a)Media-Brokers.com> > Subject: Re: [Dovecot] step-to-step Installation Guide > To: dovecot(a)dovecot.org > Date: Wednesday, 23 June, 2010, 18:34 > On 2010-06-23 11:03 AM, Eric Shubert > wrote: > > Are you running other services on your server, or will > it be dedicated > > to email? If the later, you might want to look into > > http://qmailtoaster.com/. > > Bad advice imo. QMail is dead, it just doesn't know it yet. > :) > > Seriously thought, the only person who should be using > qmail is someone > who has been using it forever and knows it inside and out - > and I would > *still* argue that they should just admit the truth and > move on. > > Do yourself a favor and don't go down that road. The best > two open > source MTA's are postfix and Exim, so you should be using > one of them > unless there is a compelling reason to use something else. > I personally > prefer postfix, but only because that's all I've ever used. > I've heard > nothing but good things about Exim, so you wouldn't be > going wrong > either way. > > -- > > Best regards, > > Charles >

1 0