- dovecot - dovecot.org

[Dovecot] Migration 1.2.10 -> dovecot-2.0.beta
by Frank Elsner 22 Feb '10

22 Feb '10

Hello *, I've a well functioning dovecot.1.2.10 installation. I'd like to migrate to dovecot.2.0.beta. Is it possible to use one (big) dovecot.conf or must I split it into pieces into directory conf.d? What is the best procedure to convert the configuration file? Any pointers welcome. --Frank Elsner

2 1

[Dovecot] (minor) bug in configure
by Sandro Tosi 22 Feb '10

22 Feb '10

Hello, while reading config options for dovecot v1.2.10 I've noticed a very small bug: # ./configure --help | egrep -- 'Dovecot|--with-gnu-ld' `configure' configures Dovecot 1.2.10 to adapt to many kinds of systems. --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-gnu-ld assume the C compiler uses GNU ld default=no I think the latter entry should be removed. Thanks for considering, Sandro

2 1

[Dovecot] Replication status
by dovecot＠lechtermann.net 22 Feb '10

22 Feb '10

Hello, I couldn't find any recent informations regarding the status of implementing replication to Dovecot. Especially master/master is what I am waiting for. Is it useable yet with 2.0 or, if not, any eta? Thanks in advance, Michael

2 1

[Dovecot] 1/2 OT: Finger mail count
by Marcio Merlone 22 Feb '10

22 Feb '10

Hi all, Is there how to make the finger command retrieve mail count from maildir? Thanks and best regards. -- Marcio Merlone

1 0

[Dovecot] Highly Performance and Availability
by Wayne Thursby 22 Feb '10

22 Feb '10

Hello everyone, I am currently running Dovecot as a high performance solution to a particular kind of problem. My userbase is small, but it murders email servers. The volume is moderate, but message retention requirements are stringent, to put it nicely. Many users receive a high volume of email traffic, but want to keep every message, and *search* them. This produces mail accounts up to 14+GiB. After seeing the failures of my predecessors, I transitioned to Postfix/Dovecot and haven't looked back. Things are running nicely with the below setup. Postfix and Dovecot running on the same virtual machine on a Dell 2950 with 1x Xeon E5440 on ESXi 4. Maildirs served up by 10x146GB 15k RPM SAS drives on RAID-10 via direct attached Dell MD-1000. We are transitioning other services to high availability, and I'm wondering exactly how to provide some kind of near-realtime failover for my Postfix/Dovecot machine. The MD-1000 provides nothing in the way of iSCSI, but it *does* have two SAS connections available, only one of which is in use. I have been looking at the Dell EqualLogic stuff and it seems to provide what we need. I can get most of the information I need from the rep, but I wonder if anyone has any experience with high performance requirements on these kinds of storage. I'd like to continue running my current hardware as the primary mail server, but provide some kind of failover using the SAN. The primary usage of the SAN will be to make our 2TB document store highly available. I'm wondering what kind of options I might have in the way of piggybacking some email failover on this kind of hardware without sacrificing the performance I'm currently enjoying. Is it possible to go with a virtual machine mounted on iSCSI acting as a backup mail server? How would I sync the two, NBD+MD? Any experience doing this with maildirs? I wonder about the performance. Can it be as simple as attaching my MD-1000's second controller to the SAN magic box via SAS and pressing the Easy button? Is it as expensive as running my primary mailserver mounted from the SAN via Fiber Channel? Will that get me under 30ms latency? I welcome any suggestions the group may have. -- Wayne Thursby System Administrator Physicians Group, LLC

5 13

[Dovecot] Best inode_ratio for maildir++ on ext4
by Rodolfo Gonzalez 22 Feb '10

22 Feb '10

Hi, This might be a silly question: which would be the best inode ratio for a 5 Tb filesystem dedicated to Maildir++ storage? I use ubuntu server, which has a preconfigured setting for mkfs.ext4 called "news" with inode_ratio = 4096, and after formating the fs with that setting and then with the defautl setting I see this difference of space (wasted space, but more inodes): 4328633696 free 1K-blocks with mkfs's "-T news" switch = 1219493877 free inodes 4557288800 free 1K-blocks with default mkfs settings = 304873461 free inodes I'll be storing e-mail messages for around 20,000 accounts on that partition (average 512 Mb per account). Would you consider worth the waste of about 200 Gb of the filesystem space in exchange of more inodes? Thanks. Rodolfo.

6 7

[Dovecot] Dovecot setting up SASL/TLS now it will not start
by VaineDragon 22 Feb '10

22 Feb '10

[root@dragon-server dragon]# /etc/init.d/dovecot restart Stopping Dovecot Imap: [FAILED] Starting Dovecot Imap: Error: Error in configuration file /etc/dovecot.conf line 795: Unknown section type (section changed in /etc/dovecot.conf at line 787) Fatal: Invalid configuration in /etc/dovecot.conf Any help will be greatly appreciated. -- View this message in context: http://old.nabble.com/Dovecot-setting-up-SASL-TLS-now-it-will-not-start-tp2… Sent from the Dovecot mailing list archive at Nabble.com.

2 1

[Dovecot] enabling IMAP SORT and THREAD extensions
by Colin Brace 21 Feb '10

21 Feb '10

Hi all, The home page of the Dovecot website indicates: "Supports multiple commonly used IMAP extensions, including SORT, THREAD and IDLE." However, I cannot find instructions in the Wiki for how to enable these extensions. Can someone tell me how to do this? I will add this info to the Wiki myself if need be. Thanks. ----- Colin Brace Amsterdam http://lim.nl -- View this message in context: http://old.nabble.com/enabling-IMAP-SORT-and--THREAD-extensions-tp27673898p… Sent from the Dovecot mailing list archive at Nabble.com.

4 4

Re: [Dovecot] Bug#570764: dovecot-common: sieve should allow Return-path header for address test
by Marco Nenciarini 21 Feb '10

21 Feb '10

package dovecot-common forward 570764 dovecot(a)dovecot.org thanks Martin Schwenke ha scritto: > Package: dovecot-common > Version: 1:1.2.10-1 > Severity: normal > > > I attempt to compile the following sieve script... > > martins@bilbo:~/tmp$ cat test.sieve > if address :is "Return-path" "owner-cipe-l(a)inka.de" { > keep; > } > > [Yes, it is useless - a minimal example to illustrate the bug. :-) ] > > ... and I get the following error: > > martins@bilbo:~/tmp$ sievec test.sieve > test: line 1: error: specified header 'Return-path' is not allowed for the address test. > test: error: validation failed. > Error: failed to compile sieve script 'test.sieve' > > This test is included in an example in the Dovecot sieve documentation at: > > http://wiki.dovecot.org/LDA/Sieve#Mail_filtering_by_various_headers > > That seems to suggest that it should work! > > peace & happiness, > martin > > -- System Information: > Debian Release: squeeze/sid > APT prefers testing > APT policy: (990, 'testing') > Architecture: amd64 (x86_64) > > Kernel: Linux 2.6.26-2-amd64 (SMP w/4 CPU cores) > Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/bash > > Versions of packages dovecot-common depends on: > ii adduser 3.112 add and remove users and groups > ii libbz2-1.0 1.0.5-4 high-quality block-sorting file co > ii libc6 2.10.2-2 GNU C Library: Shared libraries > ii libcomerr2 1.41.9-1 common error description library > ii libdb4.8 4.8.26-1 Berkeley v4.8 Database Libraries [ > ii libgssapi-krb5-2 1.8+dfsg~alpha1-5 MIT Kerberos runtime libraries - k > ii libk5crypto3 1.8+dfsg~alpha1-5 MIT Kerberos runtime libraries - C > ii libkrb5-3 1.8+dfsg~alpha1-5 MIT Kerberos runtime libraries > ii libldap-2.4-2 2.4.17-2.1 OpenLDAP libraries > ii libmysqlclient16 5.1.41-3 MySQL database client library > ii libpam-runtime 1.1.1-1 Runtime support for the PAM librar > ii libpam0g 1.1.1-1 Pluggable Authentication Modules l > ii libpq5 8.4.2-2 PostgreSQL C client library > ii libsqlite3-0 3.6.22-1 SQLite 3 shared library > ii libssl0.9.8 0.9.8k-8 SSL shared libraries > ii openssl 0.9.8k-8 Secure Socket Layer (SSL) binary a > ii ucf 3.0025 Update Configuration File: preserv > ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime > > dovecot-common recommends no packages. > > Versions of packages dovecot-common suggests: > ii ntp 1:4.2.4p8+dfsg-1 Network Time Protocol daemon and u > > -- no debconf information > > This bug happen with latest version of sieve patches applied on dovecot 1.2.10. Regards, Marco -- --------------------------------------------------------------------- | Marco Nenciarini | Debian/GNU Linux Developer - Plug Member | | mnencia(a)prato.linux.it | http://www.prato.linux.it/~mnencia | --------------------------------------------------------------------- Key fingerprint = FED9 69C7 9E67 21F5 7D95 5270 6864 730D F095 E5E4

1 0

[Dovecot] Dovecot blog
by Timo Sirainen 20 Feb '10

20 Feb '10

http://blog.dovecot.org/ I was thinking that I could blog about: - ideas for new Dovecot feature designs - when I actually manage to implement some new great feature - maybe some stuff about IMAP/email in general - and maybe whenever I happen to be moving to a different country I wasn't really planning on announcing new releases there. Dovecot feature designs are also sent to Dovecot mailing list, as before. But there have been other things I've thought about mentioning somewhere, but Dovecot ML didn't really seem like the right place. I doubt I'll update the blog very often. But that probably makes it even more useful, since casual readers find the useful stuff quickly. :)

5 5