- dovecot - dovecot.org

[Dovecot] problem with convert-tool: "Invalid mailbox name"
by Ezequiel Alfíe 11 Jul '09

11 Jul '09

Hello everyone. I'm having a problem with convert-tool while trying to convert mbox folders to maildir. I'm running dovecot-1.1.16 on Centos 5.3 If the user has subfolders, convert-tool fails saying: "Mailbox conversion: Couldn't create mailbox sub/folder3: Invalid mailbox name" However, if I ran the convert-tool with the same arguments and same folders with dovecot 1.1.11 on Ubuntu 9.04 it works fine. Any pointers for troubleshooting this? Thanks in advance, Ezequiel

2 3

[Dovecot] Relative home directory paths not supported 1.2.1 broke my setup
by Robert Schetterer 10 Jul '09

10 Jul '09

Hi Timo,guess this patch break my setup http://hg.dovecot.org/dovecot-1.2/rev/dd49cf3fd2c9 the log entry does not look very right cause i dont use relative paths or i missinterpreted somthing here Jul 10 21:12:29 dovecot: Error: Relative home directory paths not supported (user robert(a)schetterer.com) maildir:/usr/local/virtual/schetterer.com/robert@schetterer.com/ how can i get my old setup working ? i have user_query = SELECT concat('maildir:/usr/local/virtual/', maildir) AS home, -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 2

[Dovecot] Can expire-tool skip folders with "expire time in future" errors?
by Ralph Seichter 10 Jul '09

10 Jul '09

Hi folks, when I run expire-tool, I often see messages like the following: # dovecot --exec-mail ext /usr/libexec/dovecot/expire-tool Info: user/Trash: stop, expire time in future: Fri May 22 17:42:23 2009 the server's dovecot.conf contains the following line: expire = Trash 2 Junk 7 */News 30 */Reports 7 >From what I observe, an error of "expire time in future" in one of the Trash folders stops expire-tool alltogether, meaning that remaining folders like News or Reports don't get processed at all? Is this interpretation correct? If so, can I convince expire-tool to skip errors and continue processing other folders? -R

4 23

[Dovecot] xi.rename-it.nl debian dovecot-1.2.1 ?
by Robert Schetterer 10 Jul '09

10 Jul '09

Hi, normally i update with deb http://xi.rename-it.nl/debian/ experimental-auto main and apt-get install dovecot-common dovecot-dev dovecot-imapd dovecot-pop3d on my testserver , but it seems that this dont works since 1.2.rc8 if i have a look at http://xi.rename-it.nl/debian/pool/dovecot-1.2/ it seems 1.2.1 is allready there hope that the rep mantainer reads this -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

3 3

Re: [Dovecot] expire plugin with 1.2 cronjob undefined symbol: capability_string
by Robert Schetterer 10 Jul '09

10 Jul '09

dovecot(a)dovecot.org schrieb: > Hi, > > this looks like one of my queued problems: > > On AIX I get a message that indicates missing global symbols. > > For example "client_read_args". It is defined in src/imap/client.c but > just linked at build time to the "imap" executable, while the > "expire-tool" does not provide this function. > > Does expire-tool require the plugins "quota" and "quota_imap" at all? > > Is it the same issue or just another AIX specific problem I've to fix? :-) > > Ralf > > > This is what the AIX runtime linker outputs: > > # /usr/local/dovecot-1.2.dev/sbin/dovecot \ > --exec-mail ext \ > /usr/local/dovecot-1.2.dev/libexec/dovecot/expire-tool \ > --test > > Info: Loading modules from directory: > /usr/local/dovecot-1.2.dev/lib/dovecot/imap > Info: Module loaded: > /usr/local/dovecot-1.2.dev/lib/dovecot/imap/lib10_quota_plugin.so > Error: > dlopen(/usr/local/dovecot-1.2.dev/lib/dovecot/imap/lib11_imap_quota_plugin.so) > failed: rtld: 0712-001 Symbol client_read_args was referenced > from module > /usr/local/dovecot-1.2.dev/lib/dovecot/imap/lib11_imap_quota_plugin.so(), > but a runtime definition of the symbol was not found. > rtld: 0712-001 Symbol client_send_command_error was referenced > from module > /usr/local/dovecot-1.2.dev/lib/dovecot/imap/lib11_imap_quota_plugin.so(), > but a runtime definition of the symbol was not found. > rtld: 0712-001 Symbol client_send_tagline was referenced > from module > /usr/local/dovecot-1.2.dev/lib/dovecot/imap/lib11_imap_quota_plugin.so(), > but a runtime definition of the symbol was not found. > rtld: 0712-001 Symbol command_register was referenced > from module > /usr/local/dovecot-1.2.dev/lib/dovecot/imap/lib11_imap_quota_plugin.so(), > but a runtime definition of the symbol was not found. > rtld: 0712-001 Symbol capability_string was referenced > from module > /usr/local/dovecot-1.2.dev/lib/dovecot/imap/lib11_imap_quota_plugin.so(), > but a runtime definition of the symbol was not found. > rtld: 0712-001 Symbol command_unregister was referenced > from module > /usr/local/dovecot-1.2.dev/lib/dovecot/imap/lib11_imap_quota_plugin.so(), > but a runtime definition of the symbol was not found. > rtld: 0712-001 Symbol client_send_line was referenced > from module > /usr/local/dovecot-1.2.dev/lib/dovecot/imap/lib11_imap_quota_plugin.so(), > but a runtime definition of the symbol was not found. > Additional errors occurred but are not reported. > Fatal: Couldn't load required plugins > > > Robert Schetterer schrieb am 08.07.2009 11:13: >> Hi, >> sorry if this asked twice, >> i ve searched the list and found some equal posts, but couldnt >> get my problem fixed with it >> >> if running cronjob with expire ( using mysql ) >> i get >> >> dovecot -c /etc/dovecot/dovecot.conf --exec-mail ext >> /usr/lib/dovecot/expire-tool --test >> Info: Loading modules from directory: /usr/lib/dovecot/modules/imap >> Info: Module loaded: /usr/lib/dovecot/modules/imap/lib01_acl_plugin.so >> Error: dlopen(/usr/lib/dovecot/modules/imap/lib02_imap_acl_plugin.so) >> failed: /usr/lib/dovecot/modules/imap/lib02_imap_acl_plugin.so: >> undefined symbol: capability_string >> Fatal: Couldn't load required plugins >> >> someone tips how to fix it ? >> perhaps problems relate to mail_location settings? >> >> dovecot --version >> 1.2.rc8 >> > Hm, I ve read http://dovecot.org/pipermail/dovecot/2009-June/040126.html and used this script ( only problem to original was case sensitve mail_plugins) #!/bin/bash MAIL_PLUGINS=${mail_plugins//imap_quota/} /usr/lib/dovecot/expire-tool $1 now it runs dovecot -c /etc/dovecot/dovecot.conf --exec-mail ext /usr/sbin/expire-tool.sh --test Info: Loading modules from directory: /usr/lib/dovecot/modules/imap Info: robert(a)schetterer.com/Trash: stop, expire time in future: Wed Jul 15 10:34:39 2009 but i still have to test if there is a real delete -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 3

[Dovecot] Dovecot fails to deliver big messages
by disconnect 10 Jul '09

10 Jul '09

Description of problem: Hello, I am having problems with Dovecot not delivering 'big' emails. Small email with 1-2 kb text delivered fine. If the message about 200kb long or more it freezes. I am also getting "copy: i_stream_read() failed: Permission denied" erros in Dovecot log files. I have tried switching off selinux and settings 777 permissions to my mail_location - it both dont help. Here is my cfg info: # 1.2.0: /etc/dovecot.conf # OS: Linux 2.6.29.5-191.fc11.x86_64 x86_64 Fedora release 11 (Leonidas) ext4 protocols: imap pop3 listen: * ssl: no login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_greeting: PREVED MEDVED first_valid_uid: 8 last_valid_uid: 8 first_valid_gid: 12 last_valid_gid: 12 mail_location: maildir:/home/email/%d/%n mail_debug: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 imap_client_workarounds(default): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login digest-md5 cram-md5 passdb: driver: sql args: /etc/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot-sql.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 432 user: mail group: mail Version-Release number of selected component (if applicable): I'm running FC11 with exim and dovecot installed. The ext4 filesystem used for mail_location. Accounts are stored in PostgreSQL database. I have this for dovecot-1.2-0.rc6.1.fc11.x86_64 and dovecot-1.2.0-3.fc11.x86_64 Actual results: Emails freezed by SMTP server Expected results: Emails delivered to mail_location Additional info: There was no problems on my old FC9 setup with dovecot-1.0* and about same config as above. I get this in /var/log/maillog when i'm trying to force delivery of freezed message (exim -M <message-id>): Jul 10 03:02:22 phobos dovecot: deliver(m.dmitrieva(a)eds.su): auth input: home=eds.su/m.dmitrieva/ Jul 10 03:02:22 phobos dovecot: deliver(m.dmitrieva(a)eds.su): auth input: uid=8 Jul 10 03:02:22 phobos dovecot: deliver(m.dmitrieva(a)eds.su): auth input: gid=12 Jul 10 03:02:22 phobos dovecot: deliver(m.dmitrieva(a)eds.su): Home dir not found: eds.su/m.dmitrieva/ Jul 10 03:02:22 phobos dovecot: deliver(m.dmitrieva(a)eds.su): maildir: data=/home/email/eds.su/m.dmitrieva Jul 10 03:02:22 phobos dovecot: deliver(m.dmitrieva(a)eds.su): maildir++: root=/home/email/eds.su/m.dmitrieva, index=, control=, inbox=/home/email/eds.su/m.dmitrieva Jul 10 03:02:22 phobos dovecot: deliver(m.dmitrieva(a)eds.su): Namespace : Using permissions from /home/email/eds.su/m.dmitrieva: mode=0700 gid=-1 Jul 10 03:02:22 phobos dovecot: deliver(m.dmitrieva(a)eds.su): mkdir_parents_chown(eds.su/m.dmitrieva/) failed: Permission denied (euid=8(mail) egid=12(mail)) Jul 10 03:02:22 phobos dovecot: deliver(m.dmitrieva(a)eds.su): copy: i_stream_read() failed: Permission denied Jul 10 03:02:22 phobos dovecot: deliver(m.dmitrieva(a)eds.su): msgid=<63F3C8CBDB91EF4CAE94833FFD0ED62805E0DEB9(a)rm_exchange.runa.ru>: save failed to INBOX: Internal error occurred. Refer to server log for more information. [2009-07-10 03:02:22] And i got this in /var/log/exim/main.log: 2009-07-10 03:02:22 1MOtm7-0002JR-Ss == m.dmitrieva(a)eds.su <M.dmitrieva(a)eds.su> R=dovecot_user T=dovecot_delivery defer (0): Child process of dovecot_delivery transport returned 75 (could mean temporary error) from command: /usr/libexec/dovecot/deliver The maildir is owned by dovecot and writable for it. I have no problems with delivering small mail, only big. ls -lZ /home/email drwx------. mail mail unconfined_u:object_r:dovecot_var_lib_t:s0 eds.su drwx------. mail mail unconfined_u:object_r:dovecot_var_lib_t:s0 reklamka.biz

3 2

[Dovecot] non-lowercase usernames
by Timo Sirainen 10 Jul '09

10 Jul '09

Should I just make Dovecot lowercase usernames by default in v2.0? auth_username_format = %Lu Does anyone actually want to use non-lowercase usernames?

4 3

[Dovecot] Sieve on full mailbox
by ian＠comtek.co.uk 10 Jul '09

10 Jul '09

Hi, We are using dovecot with "mail_plugins = cmusieve". I have Avelsieve in SquirrelMail for users to interact with it. Is there any way I can allow users to run their sieve script on an entire mailbox? While the normal case of having messages filtered as they are delivered to the Maildir makes sense it would be useful for a few users to be able to apply their rules to every message on a one-off basis. If there is a binary which will do this job? I could adapt the SquirrelMail interface to invoke it with appropriate arguments. Thanks, Ian

3 2

[Dovecot] Dovecot delivering mail in the wrong directory location
by Tjerk Wolterink 10 Jul '09

10 Jul '09

Hello everybody,my new server is setup with postfix as a MTA and dovecot as a MDA, mysql is used as a user db, and postfixadmin is used to setup accounts. Login via pop works fine, also sending via smtp works fine. HOWEVER: when i sent a mail by hand via smtp it is delivered in the wrong directory. For example for test(a)xdatasystem.com i have the following directory: /home/vmail/xdatasystem.com/test However the mail is delivered to this directory: /home/vmail/test(a)xdatasystem.com/ I cannot figure this out as dovecot is correctly configured. ( think) Here is the important part of my dovecot.conf (sorry for the indents): === DOVECOT.CONF === *disable_plaintext_auth = no* *log_timestamp = "%Y-%m-%d %H:%M:%S "* *mail_location = maildir:/home/vmail/%d/%n/Maildir* *mail_access_groups = vmail* *first_valid_uid = 100* *first_valid_gid = 100* * * *protocol imap {* *}* * * *protocol pop3 {* *pop3_uidl_format = %08Xu%08Xv* *}* *auth default {* *mechanisms = digest-md5 plain* *passdb sql {* *args = /etc/dovecot/dovecot-sql.conf* *}* *#userdb sql {* *#args = /etc/dovecot/dovecot-sql.conf* *#}* * * *userdb static {* *args = uid=vmail gid=vmail home=/home/vmail/%d/%n* * }* * * *user = root* *}* === DOVECOT.CONF === Has anybody a clue? Maybe is postfix not correctly forwarding mails to dovecat? "Here is my postfix master.cf: === MASTER.CF === smtp inet n - - - - smtpd #submission inet n - - - - smtpd # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - - - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - - 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - - - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f {$sender} -d ${recipient} # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main## See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} -- -- Tjerk Wolterink @ GMail

3 2

[Dovecot] Optimal quota method for SQL
by Tom Sommer 10 Jul '09

10 Jul '09

Hi, I just installed 1.2.0 and I'm gonna set up some quota on my vitual users. I' ve got dovecot set up as LDA, and currently I'm using the dict-mysql method described for 1.2.0, but it's not really working at all. Am I correct in assuming that with this method I can define the quota limit in my dict (sql field)? This is my current config: dict { quotadict = mysql:/etc/dovecot-dict-sql.conf } plugin { quota = dict:user::proxy::quotadict quota_rule = *:storage=0:messages=0 } protocol lda { mail_plugins = quota ..... } I want quota to be disabled unless otherwise specified in my SQL database. // Tom

2 4