- dovecot - dovecot.org

Re: [Dovecot] dovecot Digest, Vol 74, Issue 36
by javier.garcia＠ibercom.com 11 Jun '09

11 Jun '09

Estimados Sres. En este momento me encuentro fuera de la oficina hasta el día 22 de Junio. Cualquier tema urgente contacte directamente con Ibercom ya sea por teléfono o por la cuenta de correo de soporte. Perdone las molestias. Un saludo, Javier García.

1 0

[Dovecot] SELinux
by Kenneth Porter 11 Jun '09

11 Jun '09

I've temporarily got SELinux set to permissive mode on a fresh install on CentOS 5. It was blocking Dovecot's access to ~/mail because the files were labeled file_t. What's the correct way to label these?

2 2

Re: [Dovecot] dovecot Digest, Vol 74, Issue 35
by javier.garcia＠ibercom.com 10 Jun '09

10 Jun '09

Estimados Sres. En este momento me encuentro fuera de la oficina hasta el día 22 de Junio. Cualquier tema urgente contacte directamente con Ibercom ya sea por teléfono o por la cuenta de correo de soporte. Perdone las molestias. Un saludo, Javier García.

1 0

Re: [Dovecot] New patch for folder pattern matches
by Steffen Kaiser 10 Jun '09

10 Jun '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Sun, 7 Jun 2009, Johannes Berg wrote: Hallo Johannes, > Nice. I gave it an almost complete rewrite again, getting rid of the > magic array indexes and things like that. Please test, I haven't had a es gab einen off-by-one Bug beim Laden der Config. Dort habe ich noch eine "2" durch den Enum-Wert ersetzt. Beim Test sieht's super aus! Man koennte jetzt noch match_fn[] in die match_name[] packen, um alles zusammen zu haben ... . Wie ist das eigentlich, das Feld, auf den der Rueckgabewert von getenv() zeigt, darf nicht veraendert werden, oder? Ansonsten koennte man: strings[i] = p_strsplit(global_pool, tmp, ";"); if (i == MT_PATTERN_IGNCASE) { /* lower case the string */ char **list = strings[i]; while (*list) { lowercase_string(*list, *list); ++list; } } durch if (i == MT_PATTERN_IGNCASE) { lowercase_string(tmp, tmp); } strings[i] = p_strsplit(global_pool, tmp, ";"); ersetzen und Zeit sparen. Tschuess, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSi+sAHWSIuGy1ktrAQJVZgf+JpKXXSh2kwthE47OmsGLriaDhRsbiIkx 6ikOgxbvpsHXKri2h9Y0+NSG5mQnfOvT6AAz1dtapJvXxj+Z84s35xzu3xCfjnNV ent383Go6/7lrqJDvwU6Gvg3yQmXGLDPwI7OKTOK6nrcIOwrOfEx/KBfIqfEBMAp P/uxzFpUgwbDduWakKb0YobciXKm/WQ4FzP/gvHVr5cMMXKUi8Cn+EPhqE6U9gNI jwriJyxWNLC+/YIzJZZtmaRb8QXala8gGdIa56mNu2iR9p4JeYIOBWY0UgGWqKV+ TtPRm9g+DZUi3wd5avnt7YRkAbiwVw9T3mrZ9TmDHW05ZCTg41MAKA== =kxfl -----END PGP SIGNATURE-----

1 0

Re: [Dovecot] dovecot and ntp: Fatal: Time just moved backwards
by Eugene 10 Jun '09

10 Jun '09

Hi Timo, > Date: Tue, 9 Jun 2009 09:40:20 -0700 > From: Timo Sirainen <tss(a)iki.fi> > > On Jun 8, 2009, at 11:40 PM, Arno Wald wrote: > >> Timo Sirainen wrote: >>> Hmm. I suppose I could change Dovecot master so that if no imap/ >>> pop3 processes have been created yet, it would silently ignore the >>> clock move. >> >> Also it might be an idea to just restart dovecot instead of >> completely stopping it. If this happens to often in a certain time >> interval it still could be stopped to avoid too many restarts in a >> loop if there is an error situation somehow. > > http://wiki.dovecot.org/TimeMovedBackwards bottom answers this. A > restart isn't much better than just ignoring the time change. But really, all this leads is that admin has to detect the dovecot termination and simply go and restart it manually -- after some bad thoughts. I think that a config option to restart silently (or simply kill all connected imap/pop3 instances) would be quite reasonable. Basically it is the only thing I don't like in Dovecot... and was even planning to hack the time check out of the code =)) Best wishes Eugene

7 12

[Dovecot] 1.2rc5, another crash: Backtrace:dovecot-auth
by Ralf Hildebrandt 10 Jun '09

10 Jun '09

Another crahs with backtrace: GNU gdb 6.8-debian Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu"... Reading symbols from /lib/i686/cmov/libcrypt.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/libcrypt-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libcrypt.so.1 Reading symbols from /lib/libpam.so.0...done. Loaded symbols for /lib/libpam.so.0 Reading symbols from /lib/i686/cmov/libdl.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libdl-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libdl.so.2 Reading symbols from /lib/i686/cmov/libc.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libc-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libc.so.6 Reading symbols from /lib/ld-linux.so.2...Reading symbols from /usr/lib/debug/lib/ld-2.9.so...done. done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /lib/i686/cmov/libnss_compat.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_compat-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_compat.so.2 Reading symbols from /lib/i686/cmov/libnsl.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnsl-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libnsl.so.1 Reading symbols from /lib/i686/cmov/libnss_nis.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_nis-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_nis.so.2 Reading symbols from /lib/i686/cmov/libnss_files.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_files-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_files.so.2 Reading symbols from /lib/libgcc_s.so.1...done. Loaded symbols for /lib/libgcc_s.so.1 Core was generated by `dovecot-auth'. Program terminated with signal 6, Aborted. [New process 7692] #0 0xb8071424 in __kernel_vsyscall () #0 0xb8071424 in __kernel_vsyscall () No symbol table info available. #1 0xb7eee680 in *__GI_raise (sig=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 resultvar = <value optimized out> pid = -1207832588 selftid = 7692 #2 0xb7ef1d68 in *__GI_abort () at abort.c:88 act = {__sigaction_handler = {sa_handler = 0x8f90618, sa_sigaction = 0x8f90618}, sa_mask = {__val = {3220762632, 134653482, 3087132384, 0, 3220762752, 3220762740, 512, 0, 0, 3220762816, 3087595120, 134536646, 541, 0, 0, 0, 1, 134703806, 512, 1, 3220762740, 150537720, 69, 3220762868, 3220762712, 134655078, 150538293, 3220762740, 3220762744, 542, 150537752, 3086574819}}, sa_flags = 542, sa_restorer = 0x807af69 <write_full+57>} sigs = {__val = {32, 0 <repeats 31 times>}} #3 0x0806c7a5 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x8f901e8 "dovecot-auth [0x806c791] -> dovecot-auth [0x806c812] -> dovecot-auth [0x806c199] -> dovecot-auth [0x8056bd4] -> dovecot-auth(auth_request_set_username+0xaf) [0x8056c8f] -> dovecot-auth [0x805cdf2] -> "... #4 0x0806c812 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x807bd34 "file %s: line %d (%s): assertion failed: (%s)", args=0xbff8f154 "\207�\a\bg\003") at failures.c:440 No locals. #5 0x0806c199 in i_panic ( format=0x807bd34 "file %s: line %d (%s): assertion failed: (%s)") at failures.c:207 No locals. #6 0x08056bd4 in auth_request_set_login_username (request=0x9060148, username=0x8f901b0 "", error_r=0xbff8f1d8) at auth-request.c:871 __PRETTY_FUNCTION__ = "auth_request_set_login_username" #7 0x08056c8f in auth_request_set_username (request=0x9060148, username=0x8f9018a "masteruser", error_r=0xbff8f1d8) at auth-request.c:859 login_username = 0x8f901b0 "" #8 0x0805cdf2 in mech_plain_auth_continue (request=0x9060148, data=0x8f90188 "", data_size=21) at mech-plain.c:47 authid = 0x8f90188 "" authenid = 0x8f90189 "*masteruser" error = <value optimized out> pass = 0x8f901a0 "xxxxxxxx" i = <value optimized out> count = <value optimized out> #9 0x0805846c in auth_request_handler_auth_begin (handler=0x90dddd0, args=0x90dcf70 "4877\tPLAIN\tservice=imap\tsecured\tlip=127.0.0.1\trip=127.0.0.1\tlport=993\trport=43362\tresp=ACptYXN0ZXJ1c2VyAFppR2FHaW5a") at auth-request-handler.c:385 mech = <value optimized out> request = (struct auth_request *) 0x9060148 list = (const char * const *) 0x8f900c8 name = 0x8f90168 "\210\001�\b\025" arg = 0x8f90087 "ACptYXN0ZXJ1c2VyAFppR2FHaW5a" initial_resp = <value optimized out> initial_resp_len = 6 id = 4877 buf = (buffer_t *) 0x8f90168 #10 0x080539ce in auth_client_input (conn=0x8f9add8) at auth-client-connection.c:174 _data_stack_cur_id = 3 line = 0x90dcf6b "AUTH\t4877\tPLAIN\tservice=imap\tsecured\tlip=127.0.0.1\trip=127.0.0.1\tlport=993\trport=43362\tresp=ACptYXN0ZXJ1c2VyAFppR2FHaW5a" ret = 2 #11 0x08070430 in io_loop_handler_run (ioloop=0x8f981a8) at ioloop-epoll.c:208 ctx = (struct ioloop_handler_context *) 0x8f9ab58 event = (const struct epoll_event *) 0x90d4a20 list = (struct io_list *) 0x8f9afa8 io = (struct io_file *) 0x8f9af80 tv = {tv_sec = 1, tv_usec = 290883} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #12 0x0806f8a0 in io_loop_run (ioloop=0x8f981a8) at ioloop.c:338 No locals. #13 0x0805c5a4 in main (argc=) at main.c:347 foreground = false (gdb) quit ----- End forwarded message ----- -- Ralf Hildebrandt Postfix - Einrichtung, Betrieb und Wartung Tel. +49 (0)30-450 570-155 http://www.computerbeschimpfung.de >From empirical experience, your Exchange admin needs to put down the crack pipe and open a window to disperse the fumes.

1 0

[Dovecot] dovecot auth(default): Master request xxxx.xxxx not found
by Eric Sammons 09 Jun '09

09 Jun '09

Hi, Wondering if anyone could give some indication as to where to look for the cause of the following error messages. These error messages seem to occur at about the time when users are having problems logging in. Jun 8 10:33:19 host dovecot: auth(default): Master request xxxx.xxxx not found Using ldap for authentication and auth_cache is enabled, not sure if that matters. Thank you! -- Eric L. Sammons, RHCE

2 1

[Dovecot] Resync quota to mysql script
by Oli Schacher 09 Jun '09

09 Jun '09

I changed some quota options in my dovecot config (eg. excluded folders) but afaik this only affects new mail and there is no magic command to recalculate the quota (or is there?). So I wrote this little python script to do this, maybe someone finds it useful. It can output the sql statements (dovecot 1.0/1.1 and 1.2 format) or just print out quota usage to console. Download at : http://wgwh.ch/dovecot/quotasync.py , run-at-own-risk and do-whith-the-code-what-you-want applies. # cd /path/to/a/Maildir # quotasync.py INBOX : 21 messages 516739 bytes .postfix : 982 messages 7572888 bytes .bn_archiv : 77 messages 2092454 bytes .python : 2748 messages 19877135 bytes .testfolder.subfolder1.subsubfolder1 : 2 messages 19443 bytes .testfolder.subfolder2 : 1 messages 9044 bytes .testfolder : 0 messages 0 bytes .Trash : 146 messages 1702297 bytes .Drafts : 0 messages 0 bytes .Sent : 0 messages 0 bytes .Spam : 2459 messages 16152165 bytes .testfolder.subfolder1 : 4 messages 13359 bytes ------------------- TOTAL: 6440 messages 47955524 bytes Example mysql output,dovecot 1.2 format: # quotasync.py -o mysql -a user(a)domain.com INSERT INTO quota (username,bytes,messages) VALUES ('user(a)domain.com',47963905,6441) ON DUPLICATE KEY UPDATE bytes=47963905,messages=6441; Example mysql output, dovecot 1.1 format, Spam folder excluded # quotasync.py -o mysql -a user(a)domain.com -d 1.1 -e .Spam INSERT INTO quota (username,path,current) VALUES ('user(a)domain.com','quota/messages',3982) ON DUPLICATE KEY UPDATE current=3982; INSERT INTO quota (username,path,current) VALUES ('user(a)domain.com','quota/storage',31811740) ON DUPLICATE KEY UPDATE current=31811740; You can pipe this output directly to mysql. eg.: quotasync.py -a user(a)domain.com -o mysql | mysql yourdatabase run quotasync.py --help to see all options

2 2

[Dovecot] Dovecot deliver with ACL plugin enabled truble
by Nikita Koshikov 09 Jun '09

09 Jun '09

Hello folk, I have trouble running /usr/libexec/dovecot/deliver with ACL plugin enabled from my exim configurarion. Everything is working fine if I disable plugin ACL from lda section in dovecot config. This is the string from exim.conf, which request delivery to take place: command = /usr/libexec/dovecot/deliver -e -d $local_part@$domain In dovecot error-log I see this, when deliver tries to "put" message in users maildir: ==> /var/log/dovecot/dovecot-deliver.log <== deliver(user(a)domain.com): Jun 09 15:07:38 Info: Loading modules from directory: /usr/lib/dovecot/lda deliver(user(a)domain.com): Jun 09 15:07:38 Info: Module loaded: /usr/lib/dovecot/lda/lib01_acl_plugin.so deliver(user(a)domain.com): Jun 09 15:07:38 Info: Module loaded: /usr/lib/dovecot/lda/lib10_quota_plugin.so deliver(user(a)domain.com): Jun 09 15:07:38 Info: Module loaded: /usr/lib/dovecot/lda/lib11_trash_plugin.so deliver(user(a)domain.com): Jun 09 15:07:38 Info: Module loaded: /usr/lib/dovecot/lda/lib20_expire_plugin.so deliver(user(a)domain.com): Jun 09 15:07:38 Info: auth input: uid=8 deliver(user(a)domain.com): Jun 09 15:07:38 Info: auth input: gid=12 deliver(user(a)domain.com): Jun 09 15:07:38 Info: auth input: home=/var/mail/domain.com/user deliver(user(a)domain.com): Jun 09 15:07:38 Info: auth input: mail=maildir:/var/mail/domain.com/user/data deliver(user(a)domain.com): Jun 09 15:07:38 Info: Quota root: name=Mailbox quota backend=maildir args= deliver(user(a)domain.com): Jun 09 15:07:38 Info: Quota rule: root=Mailbox quota mailbox=* bytes=524288000 messages=0 deliver(user(a)domain.com): Jun 09 15:07:38 Info: Quota rule: root=Mailbox quota mailbox=Trash bytes=52428800 (10%) messages=0 deliver(user(a)domain.com): Jun 09 15:07:38 Info: maildir: data=/var/mail/domain.com/user/data deliver(user(a)domain.com): Jun 09 15:07:38 Info: maildir++: root=/var/mail/domain.com/user/data, index=, control=, inbox=/var/mail/domain.com/user/data deliver(user(a)domain.com): Jun 09 15:07:38 Info: acl: initializing backend with data: vfile deliver(user(a)domain.com): Jun 09 15:07:38 Info: acl: acl username = user(a)domain.com deliver(user(a)domain.com): Jun 09 15:07:38 Info: acl: owner = 1 deliver(user(a)domain.com): Jun 09 15:07:38 Info: acl vfile: Global ACL directory: (null) deliver(user(a)domain.com): Jun 09 15:07:38 Info: trash plugin: Added 'Spam' with priority 1 deliver(user(a)domain.com): Jun 09 15:07:38 Info: trash plugin: Added 'Trash' with priority 2 deliver(user(a)domain.com): Jun 09 15:07:38 Info: acl: initializing backend with data: vfile deliver(user(a)domain.com): Jun 09 15:07:38 Info: acl: acl username = user(a)domain.com deliver(user(a)domain.com): Jun 09 15:07:38 Info: acl: owner = 1 deliver(user(a)domain.com): Jun 09 15:07:38 Info: acl vfile: Global ACL directory: (null) deliver(user(a)domain.com): Jun 09 15:07:38 Fatal: mail_full_filesystem_access=yes is incompatible with ACLs In my current dovecot config-file option mail_full_filesystem_access is commented out. I have tried both variants to explicitly enable and disable this feature, but errors stayed the same. Please advice. Additional info: Here is my lda config: protocol lda { postmaster_address = postmaster(a)domain.com mail_plugins = quota acl trash expire quota_full_tempfail = yes auth_socket_path = /var/run/dovecot/auth-master log_path = /var/log/dovecot/dovecot-deliver.log info_log_path = /var/log/dovecot/dovecot-deliver.log } This is my dovecot config-file: # 1.1.16: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-gentoo-r4 i686 Gentoo Base System release 1.12.11.1 ext3 log_path: /var/log/dovecot/dovecot-error.log info_log_path: /var/log//dovecot/dovecot.log protocols: imaps ssl_cert_file: /etc/dovecot/ssl/imaps.crt ssl_key_file: /etc/dovecot/ssl/imaps.key login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/imap-login login_greeting_capability: yes login_processes_count: 10 login_max_processes_count: 512 first_valid_uid: 8 last_valid_uid: 8 first_valid_gid: 12 last_valid_gid: 12 mail_location: maildir:/var/mail/%d/%n/data mail_debug: yes mail_plugins: quota imap_quota acl trash mail_log fts fts_squat expire mail_log_max_lines_per_sec: 0 auth default: mechanisms: plain login cache_size: 10240 cache_negative_ttl: 0 user: mail debug: yes worker_max_count: 50 passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf passdb: driver: passwd-file args: scheme=cram-md5 /etc/dovecot/cram-md5.pwd userdb: driver: prefetch userdb: driver: ldap args: /etc/dovecot/dovecot-userdb-ldap.conf userdb: driver: passwd-file args: /etc/dovecot/cram-md5.pwd socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 master: path: /var/run/dovecot/auth-master mode: 384 user: mail group: mail plugin: quota: maildir:Mailbox quota quota_rule: *:storage=500M quota_rule2: Trash:storage=10%% acl: vfile trash: /etc/dovecot/plugins/dovecot-trash.conf expire: Trash 7 Spam 30 expire_dict: proxy::expire mail_log_events: delete undelete expunge copy mailbox_delete mail_log_group_events: mail_log_fields: uid box msgid size fts: squat dict: expire: sqlite:/etc/dovecot/plugins/expire.conf

1 0

[Dovecot] Managesieve
by Thomas E. Deutsch 09 Jun '09

09 Jun '09

Hi I've a problem. I've built a new mailserver for our company based on dovecot (1.1.15). At the same time, our company's name has changed. The old mail addresses are forwarded to the new addresses. But I've a problem with sieve. It looks like the sieve filters are only working for the new addresses. But due to the change of the name was not long ago, most of the mails are still sent to the old addresses. What can I do to get filters also working for the old addresses? Configuration of managesieve: protocol managesieve { listen = *:2000 login_executable = /usr/lib/dovecot/managesieve-login mail_executable = /usr/lib/dovecot/managesieve sieve = /home/vmail/%Ld/%Ln/sieve/dovecot.sieve sieve_storage = /home/vmail/%Ld/%Ln/sieve managesieve_implementation_string = Cyrus timsieved v2.2.13 # mail_debug=yes } Regards, Thomas

2 1