- dovecot - dovecot.org

[Dovecot] ¿DC won't start? "leaked file fd 5:"
by mathemat＠gmx.net 06 Feb '09

06 Feb '09

Hi Gents, (apologizes, new here...) I didn't find any hint on G**gle nor in the Dovecot archieve (maybe due to the lack of a search function :), so: I installed Doovecot, but can't get it going. The logfile states: > mail.info dovecot: Dovecot v1.0.15 starting up > mail.err dovecot: auth(default): Panic: Leaked file fd 5: dev 0.10 inode 3 > mail.err dovecot: Auth process died too early - shutting down I tried many obscure things to recover, but had no luck so far. As long i am just guessing around (auth? dev 0.10?? maybe SSL config?), i have no clue what happens here :(. To make things more interesting: the installation lives on an embedded device (xscale, aka arm w/4MB RAM), where are no extended debug features available (like ltrace, ldd,...), and no newer packages (if exist) available. Tried so far: * uninstall (ipkg remove) * rm'd all files listed in the package description + /var/run/dc/* * reinstall (ipkg install) * changed the config file (in many ways... but what??) The init-script does mainly "/opt/sbin/dovecot", so i tried that command on the CLI(bash) to be sure no script mangles fd's around. "echo $?" gives "0" then, but no DC process is running- log messages as above. I have no clue what to do abt that- where's the point?? Can this hopefully be done whithout installing the complete gcc toolchain and compiling a newer version from source, but by just adapting the config? 8-| Any helpful hints appreciated!, acend -- -- Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger01

2 1

Re: [Dovecot] The 'dbox' Format
by Alexander Beisig 06 Feb '09

06 Feb '09

Timo Sirainen wrote: > On Thu, 2009-02-05 at 22:42 +0100, Alexander Beisig wrote: > > I'd like to give the dbox format a try, but I could not find any > > information on how to enable it. There's information on how to set > > mail_location for the Maildir and mbox formats in the wiki and also in > > the commented configuration file, but how to set it for dbox is > > strangely missing. I took a guess with 'mail_location = dbox:~/dbox', > > but that didn't work, so it's probably not the right way. > > That's correct. > > > Also, the version of Dovecot that Debian installed was 1.0.15, which > > is kinda old. Should there any serious reasons why I should manually > > install a newer version if I'm going to use dbox? > > v1.0's dbox is completely different from what v1.1 has. It's also not > compiled in by default in v1.0. So don't even try using it. Ok thanks, so I downloaded the recent 1.1.11 release. But I still don't know how to enable the dbox format. I think dovecot-example.conf should explain how to enable it, unless you really don't want people to use this format. ____________________________________________________________________ Psssst! Schon vom neuen WEB.DE MultiMessenger gehört? Der kann`s mit allen: http://www.produkte.web.de/messenger/?did=3123

2 1

[Dovecot] Dovecot performance on GFS clustered filesystem
by Allen Belletti 06 Feb '09

06 Feb '09

Hello All, We are using Dovecot 1.1.3 to serve IMAP on a pair of clustered Postfix servers which share a fiber array via the GFS clustered filesystem. This all works very well for the most part, with the exception that certain operations are so inefficient on GFS that they generate significant I/O load and hurt performance. We are using the Maildir format on disk. We're also using Dovecot's deliver from Postfix to handle local delivery. As best I can determine, the worst problems occur when certain users with very large Inboxes (~10k messages) receive new mail and their client looks up information about that message. GFS doesn't seem to efficiently handle the large directories that contain folders like this. As a result, lots of I/O ops are generated and performance suffers for everyone. I am beginning to wonder if it might be more efficient to revert to the old mbox format, with one file per folder (plus whatever indices are creates.) It seems that this ought to work better with GFS which is geared toward smaller numbers of larger files. Is anyone on the list currently doing that? Alternately, any thoughts regarding tuning or other options would be appreciated. Thanks, Allen -- Allen Belletti allen(a)isye.gatech.edu 404-894-6221 Phone Industrial and Systems Engineering 404-385-2988 Fax Georgia Institute of Technology

3 4

[Dovecot] The 'dbox' Format
by Alexander Beisig 06 Feb '09

06 Feb '09

I'd like to give the dbox format a try, but I could not find any information on how to enable it. There's information on how to set mail_location for the Maildir and mbox formats in the wiki and also in the commented configuration file, but how to set it for dbox is strangely missing. I took a guess with 'mail_location = dbox:~/dbox', but that didn't work, so it's probably not the right way. Also, the version of Dovecot that Debian installed was 1.0.15, which is kinda old. Should there any serious reasons why I should manually install a newer version if I'm going to use dbox? __________________________________________________________________ Deutschlands größte Online-Videothek schenkt Ihnen 12.000 Videos!* http://entertainment.web.de/de/entertainment/maxdome/index.html

2 1

[Dovecot] Deferred emails on alias emails
by Jehan Pagès 05 Feb '09

05 Feb '09

Hi, I am currently making a fresh install of email server. I am having some issue with dovecot-antispam (cf. other emails), and noticed that I was having issues on aliases, which apparently where not forwarded to the actual SMTP server after passing through dspam. Still don't figure why but temporarily disable the dspam filter, which anyway is not useful in the current state of this installation. Now the email to an alias are well forwarded to the real finale server. But I still have many emails which were deferred in the last days and I cannot have them decrease. # ls -l /var/spool/postfix/defer/* | wc -l 297 If I run "postqueue -f" to flush this all, I can see the number down, but fastly comes back to 297. Reading the logs, they are passed to dovecot, which was probably the issue before I disabled dspam. It was trying to deliver a message after filtering it, but in the case of aliases, of course, it cannot because the account is not local (so it does not find the account and defers the email forever)! So it should give it back to postfix so that this one contacts the aliased server (gmail.com in the example below). Feb 4 13:33:18 ks34186 postfix/lmtp[31100]: 82769869FA: to=< someemail(a)gmail.com>, orig to=<someemail(a)mydomain.tld>, relay=mail.mydomain.tld[/var/run/dspam/dspam.sock] conn use=28, delay=142296, delays=142277/19/0/0.41, dsn=4.3.0, status=deferred (host mail.mydomain.tld[/var/run/dspam/dspam.sock] said: 421 4.3.0 <someemail(a)gmail.com> Auto-Whitelisted (in reply to end of DATA command)) Feb 4 13:33:18 ks34186 dovecot: auth(default): master in: USER 1 someemail(a)gmail.com service=deliver Feb 4 13:33:18 ks34186 dovecot: auth(default): passwd(someemail(a)gmail.com): lookup Feb 4 13:33:18 ks34186 dovecot: auth(default): passwd(someemail(a)gmail.com): unknown user Feb 4 13:33:18 ks34186 dovecot: auth-worker(default): sql( someemail(a)gmail.com) SELECT maildir as home, 1004 as uid, 1004 as gid FROM mailbox WHERE username = 'someemail(a)gmail.com' AND active = '1' Feb 4 13:33:18 ks34186 dovecot: auth-worker(default): sql( someemail(a)gmail.com) Unknown user Feb 4 13:33:18 ks34186 dovecot: auth(default): master out: NOTFOUND 1 So is there a way please to flush this whole spool so that it now uses the new method (which is stop using dspam until I figure how to use it) and so that I can forward these emails to their recipient? Thanks. Jehan P.S.: this is maybe more a postfix issue than a dovecot issue though... but you probably all know well postfix as well.

3 10

Re: [Dovecot] dovecot Digest, Vol 70, Issue 16
by Anthony Davis 05 Feb '09

05 Feb '09

Please remove me from the mailing list, i have tried a number of times to un-subscribe, but i still keep getting emails... Tony On 4 Feb 2009, at 19:35, dovecot-request(a)dovecot.org wrote: > dovecot(a)dovecot.org

2 1

[Dovecot] dirsize quota in sql pass db?
by Ken Anderson 05 Feb '09

05 Feb '09

Is there a way to return a per user dirsize quota from a passdb sql lookup? If so, what is the syntax? maybe "select quota as userdb_quota"? ..and in mysql table, quota column would be: "quota=dirsize:storage=10240" ? I'm using mbox, with /etc/passwd userdb, and mysql passdb. Thanks, Ken -- Ken Anderson Pacific.Net

3 4

[Dovecot] Error: Maximum number of mail processes exceeded (see max_mail_processes setting)
by Frank Bonnet 05 Feb '09

05 Feb '09

Hello I have this message repeated several times each *seconds* in /var/log/dovecot/dovecot.log the max_mail_processes is set to 8192 and I can see an average of 500 imap processes on the machine , I think there is a problem somewhere ... Debian 64 bits , IBM X3650 biproc , 7 Gb RAM , RAID5 disks , 2 ethernet Gb ports bonded. Dovecot 1.1.11 has been compiled from scratch on the machine Thanks for any info.

4 5

[Dovecot] 1.1.6: PAM passdb/userdb (mis)configuration
by Oved Ben-Aroya 05 Feb '09

05 Feb '09

I'm sure I'm missing something obvious :-( Dovecot version 1.1.6, pam authentication via ldap (openldap). basicly, we use: passdb pam userdb passwd which work fine, except for Outlook/OL Express users that are asked for their password whenever they "send/receive"... We've had also "passdb shadow" that somehow "fixed" this but allowed also users with expired passwords to login :-( re-added for now, untill the correct configuration is achived). Here is the output of dovecot -n: # 1.1.6: /usr/local/etc/dovecot.conf # OS: Linux 2.6.9-55.ELsmp x86_64 Red Hat Enterprise Linux AS release 4 (Nahant Update 7) info_log_path: /var/log/dovecot protocols: imap imaps pop3 pop3s listen(default): * listen(imap): * listen(pop3): *:110 ssl_listen(default): ssl_listen(imap): ssl_listen(pop3): *:995 ssl_ca_file: /usr/local/etc/dovecot/certs/IPS-IPSCABUNDLE.CRT ssl_cert_file: /usr/local/etc/dovecot/certs/dovecot.pem ssl_key_file: /usr/local/etc/dovecot/private/dovecot.pem disable_plaintext_auth: no verbose_ssl: yes login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login first_valid_uid: 50 mail_debug: yes mail_full_filesystem_access: yes mmap_disable: yes lock_method: dotlock mbox_read_locks: dotlock mbox_write_locks: dotlock mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %08Xv%08Xu pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh namespace: type: private separator: / prefix: mail/ location: mbox:%h/mail list: yes subscriptions: yes namespace: type: private separator: / location: maildir:%h/Maildir:INDEX=/var/dovecot/index/%u:CONTROL=/var/dovecot/control/%u inbox: yes list: yes subscriptions: yes auth default: verbose: yes debug: yes worker_max_request_count: 10 passdb: driver: pam args: dovecot passdb: driver: shadow userdb: driver: passwd args: blocking=yes Thank you for your help. -- \Oved Dr. Oved Ben-Aroya, Head Unix group, Taub Computer Center, Technion Phone: +972 (4) 829 3688 FAX: +972 (4) 823 6212 oved(a)technion.ac.il PGP key at http://tx.technion.ac.il/~oved/pgp/pubkey PGP Key fingerprint: A9 52 46 04 E8 70 41 99 60 E3 DA 8F BA 39 C2 C8

2 4

[Dovecot] Script: Moving Maildirs between servers
by Peter Lindgren 05 Feb '09

05 Feb '09

Hi, I just migrated from dovecot 1.0.rc29 to 1.1.7, from Sparc platform to Intel, it went very well. In the process I merged folders and excluded folders from being copied. User rights on folders were kept/set. I thought I'd share my migration script with you folks. If there's an interest to put it on the wiki I can do that, but I'm not sure in what page. Use it as a starter if you need to do this yourselves. Prerequisites: * User names are local unix accounts * Old server's /home must be mounted with nfs * Structure and user names must match between the two systems * Source dovecot must be at least version 1.0.x * Destination dovecot must be 1.1.x * Only dovecot data folders and files are copied, neither dovecot indices nor Sieve scripts etc. Here it goes, have fun! /Peter #!/bin/sh # # Migrates dovecot Maildir folders and settings from older dovecot on # old server to new dovecot on new server. # Prerequisites: # * User names are local unix accounts # * Old server's /home must be mounted with nfs # * Structure and user names must match between the two systems # * Source dovecot must be at least version 1.0.x # * Destination dovecot must be 1.1.x # * Only dovecot data folders and files are copied, neither dovecot indices nor Sieve scripts etc. # # Originally created by Peter Lindgren <peter(a)norrskenkonsult.com> # Use this script at your own risk. No warranties whatsoever, of any kind! # Basic settings: The first one you must definitely change, it's where you have mounted the old server's home: SOURCEBASE=/mnt/casiopea-home DESTBASE=/home # Just an abbreviation: MD=Maildir # Change field separator, for find's sake as there might be folders with spaces: # (doesn't play well together with the for loop otherwise) OLDIFS=${IFS} IFS=' ' # User loop: # Depending on your source system's setup, # you probably have non-interactive users with home directories (one of them # is probably named _dovecot) that shall not be copied. Edit the username # exclusion list according to your needs. # for username in `ls $SOURCEBASE`; do { # This is your username exclude list: case $username in (maildir|_dovecot) continue;; esac # Here starts the real work: SOURCEDIR=$SOURCEBASE/$username/$MD DESTDIR=$DESTBASE/$username/$MD echo "================================" echo "Copying user "$username"..." echo "From "$SOURCEDIR" to "$DESTDIR":" # IMAP Folder loop: # Will create the Maildir folder too, the first echo $SOURCEDIR"/." does that. This way all the copying is in one place only. for sourceimap in `{ echo $SOURCEDIR"/." ; find $SOURCEDIR -type d -name \.\* -maxdepth 1 -print ; } | sort -f`; do { # Folder exlusion and special actions: # .Draft is replaced by .Drafts, so content of .Draft must be copied to .Drafts. # (Probably there were a client in use for a while that used .Draft instead of .Drafts.) # Junk mail folders with various names from clients using different languages shall not be copied. # .Trash shall not be copied either. # Folder .INBOX is a leftover from earlier versions of dovecot, and shall not be copied either. # Add your own exceptions to the list. Be sure to quote spaces and dots. basename=`basename $sourceimap` action=copy case $basename in (\.Junk|\.Junk\ E-mail|\.Correo\ electr\&APM-nico\ no\ deseado|\.Skr\&AOQ-ppost|\.Trash|\.INBOX) action=skip;; esac echo -n "$basename" "$action" if [ $action"X" == copy"X" ]; then { echo -n ":" destname=$basename # Merge contents of .Draft and .Drafts to .Drafts: if [ $basename"X" == .Draft"X" ]; then destname=${destname}"s"; fi destimap=${DESTDIR}/${destname} # If this is the Maildir folder (.), a clean desination name is needed for mkdir: if [ $basename"X" == ."X" ]; then destimap=${DESTDIR}; fi mkdir -m 700 "${destimap}" echo -n "." chown ${username} "${destimap}" echo -n "." chmod go-rx "${destimap}" echo -n "." cp -p "${sourceimap}/dovecot-uidlist" "${destimap}" echo -n "." cp -p "${sourceimap}/dovecot-keywords" "${destimap}" echo -n "." cp -pR "${sourceimap}/cur" "${destimap}" echo -n "." cp -pR "${sourceimap}/new" "${destimap}" echo -n "." cp -pR "${sourceimap}/tmp" "${destimap}" echo " done." } else { echo "" } fi }; done # Copy root folder files last in user loop, since the Maildir is created in the imap loop above: cp -p $SOURCEDIR/subscriptions $DESTDIR echo "User "${username}" done." }; done IFS=${OLDIFS} -- Peter Lindgren http://www.norrskenkonsult.com

7 11