- dovecot - dovecot.org

Re: [Dovecot] UIDL question
by Timo Sirainen 28 Nov '08

28 Nov '08

On Nov 28, 2008, at 6:43 PM, Wouter van der Schagt wrote: >> This mixes v3 syntax with v1 syntax, won't work. > > You're right, after changing it to the v3 syntax i'm getting exactly > the same output in both servers after issuing the UIDL command in a > telnet session. So far so good. > > However, a 2nd copy of the files is still being downloaded. Is this > because the IP has changed? My steps are. > > - Download emails from IP.IP.IP.1 > - Migrate emails > - Confirm manually that UIDL output is the same > - If so, download emails from IP.IP.IP.2 > > And in the last step, im still getting a 2nd copy of all emails. > Where is the fault in my reasoning? Do i need to give dovecot a > message number that was last downloaded? If the UIDLs are exactly the same, I've no idea why the client would download a duplicate. I haven't heard before that a changed IP would be an issue. Of course that would still be a client-specific issue. Sounds a bit unlikely though. Ccing back to list in case someone else has an idea..

2 1

[Dovecot] Namespaces and shared folders
by bbell2000 28 Nov '08

28 Nov '08

I had a working dovecot install before I tried to implement shared folders using namespaces. I added the following to /etc/dovecot/dovecot.conf: namespace private { separator = prefix = inbox = yes } namespace public { separator = / prefix = location = maildir:/home/public/shared/Maildir } </pre> I created my shared folder using the maildirmake command that came with qmail: maildirmake -S /home/public/shared/Maildir maildirmake -s write -f online /home/public/shared/Maildir chown -R dovecot:shared /home/public/shared find /home/public/shared -type d -exec chmod 0777 {} \; find /home/public/shared -type f -exec chmod 0666 {} \; At this point, the online folder shows up as a subscribable folder in Thunderbird. I can subscribe to online and I can still access my Inbox. But I can't get to any of the folders in my Inbox (Trash, Drafts, etc.). I can access these folders if I comment out the namespaces and revert to the default behavior. There are no clues in mail.err, mail.info or mail.warn -- the only messages are the ones written when my client establishes a successful IMAP connection. What did I do wrong? -- View this message in context: http://www.nabble.com/Namespaces-and-shared-folders-tp20727713p20727713.html Sent from the Dovecot mailing list archive at Nabble.com.

3 4

[Dovecot] UIDL question
by Wouter van der Schagt 28 Nov '08

28 Nov '08

Hi all, I'm migrating a Postfix + Dovecot 1.0 server with mboxes to Qmail + Dovecot 1.4 with Maildirs and encounter the following the problem. Using perfect-maildir.pl from: http://perfectmaildir.home-dn.net/ i can relatively succesfully convert the mbox to a Maildir. The problem, however is that clients with "leave mail on server" set to on retrieve all email a 2nd time. I understand this must be because the email client "sees" a different UIDL and downloads the message again. Looking at the 1.0 configuration, i do not see a "pop3_uidl_format" setting. So was wondering how the UIDL is generated. Is anybody aware of a conversion script that properly maintains the UIDL? Or am I misisng something else here? Sincerely, - Wouter van der Schagt

3 8

[Dovecot] Dovecot - Vpopmail subdirectories
by Yacoubi Mohamed 28 Nov '08

28 Nov '08

Hello, I have several thousand domains on a server. I'm doing now migration to Dovecot to replace courier-authlib. Some email accounts are in subdirectories that are automatically created by vpopmail. Example: / var/vpopmail/domains/0/domain.com How do I configure Dovecot? ###################################################### # 1.1.6: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26.5-sdf103-nfsv4 i686 Gentoo Base System release 1.12.9 ext3 base_dir: /var/run/dovecot/ protocols: imap listen: *:143 ssl_disable: yes disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/imap-login login_greeting: Imap ready. first_valid_uid: 89 mail_location: maildir:/var/vpopmail/domains/%d/%n/.maildir auth default: user: vpopmail passdb: driver: vpopmail userdb: driver: static args: uid=89 gid=89 mail=Maildir:/var/vpopmail/domains/%/%d/% n/.maildir ###################################################### Best regards, -- Mohamed YACOUBI

1 0

Re: [Dovecot] anti spam measures
by Johannes Berg 28 Nov '08

28 Nov '08

[please don't drop the list, somebody else might care] On Wed, 2008-11-26 at 07:02 -0700, Trever L. Adams wrote: > Johannes Berg wrote: > > Interesting. Somebody else was reporting the same errors, but I'm not > > seeing them. But I'm still using 1.1.2. I'll review the changes, I > > guess, but if I don't find anything quickly I won't get around to poking > > at it before Christmas. > > > > johannes > > > > I found out what the problem is. In your git tree you have the signature > option set for both dspam and crm114 with both uncommented. Oh, so it's looking for the crm signature? Well, I guess the man-page should have them both commented out, maybe. > Can you provide me with more information on your crm setup? Well, it's a bit complicated, but I'll leave out the SMTP part. When a mail is delivered locally, it's passed to crm114: basically: xfilter "/usr/local/bin/mailreaver" if ( /^X-CRM114-Status: UNSURE/:h ) { to $HOME/Maildir/.UNSURE/ } if ( /^X-CRM114-Status: SPAM/:h ) { to $HOME/Maildir/.SPAM/ } and then in dovecot, I have: plugin { crm114_spam = SPAM crm114_unsure = UNSURE crm114_signature = X-CRM114-CacheID crm114_crm_binary = /usr/local/bin/mailreaver } (I compile my plugin with the option to change the pluginname) johannes

3 6

[Dovecot] Does either version 1.2 or 1.4 support UIDPLUS?
by Robert Nicholson 27 Nov '08

27 Nov '08

My ISP currently runs version 1.2 and I'm looking to make use of UIDPLUS because I want to append and then move the message I've just appended to another folder so then I need the UID in order to address the new message. My ISP says they have plans to upgrade to version 1.4 soon. Do either of these versions support UIDPLUS? ie. give me the new UID as the response to an append?

3 8

[Dovecot] expire tool question
by Jakob Curdes 27 Nov '08

27 Nov '08

Hi, I try to get expire working, with the BDB backend and mbox mailboxes. If I try to invoke the expire-tool like /usr/local/sbin/dovecot --exec-mail ext /usr/local/libexec/dovecot/expire-tool --test I get [root@m ~]# /usr/local/sbin/dovecot --exec-mail ext /usr/local/libexec/dovecot/expire-tool --test Error: read(/var/run/dovecot/dict-server) failed: Remote disconnected Hmm. I searched for hints but could not find a related discussion or problem. Here are the relavant config parts: dict { expire = db:/var/lib/dovecot/expire.db } plugin { # expire plugin expire_dict = proxy::expire expire = backup 7 spam 30 # If you have a non-default path to auth-master, set also: auth_socket_path = /var/run/dovecot/auth-master } Any ideas? Has anybody got this working ? The file /var/lib/dovecot/expire.db doas not exit even though I restarted DC quite a while ago. Regards, Jakob

3 5

Re: [Dovecot] antispam plugin claims "antispam signature not found"
by Eugene 27 Nov '08

27 Nov '08

Jakob Curdes wrote > Some weeks ago I asked a question on the antispam plugin; obviously > nobody could help me. I just worked on it again but made no progress. > Is actually anybody out there running the antispam plugin with dspam?? I > am willing to write a Wiki page for configuring this as soon as I get it > to work. > ..... > - as soon as I move a message into the spam folder it gives an error > message saying "antispam signature not found" Just had this error myself. In my case, the cause was a large spam message (above the configured MaxMessageSize parameter for DSPAM) that was skipped during tests and thus no signature was added. Might this be true in your case? As a general suggestion for Johannes: maybe it is better to ignore this error silently, just move the message and don't call DSPAM? > I checked that the given location for the dspam executable is correct, > that the user executing it (dovecot?) is actually able to execute dspam > and that dspam trusts this user. I triple-checked that the signature is > configured correctly. I have lines like > X-DSPAM-Signature: 1,49084a24139132188715614 Another guess: if that comma is not a misprint, something is wrong in your setup. Regards Eugene

5 5

[Dovecot] Can I import RFC822 messages into Dovecot from file system
by bbell2000 27 Nov '08

27 Nov '08

I'm returning to qmail and dovecot after having suffered a complete failure with a different mail system and I'm now trying to figure out the easiest way to recover our messages from the failed system. The messages are stored as RFC822 in individual files and I can easily identify which message belongs to whom. I have qmail and dovecot configured to use Maildir format. I know I can probably write a script that resends the messages... but in addition to adding another layer of transport headers I really don't want, it's going to be way slow unless I disable my current content filters. I'm new to dovecot and what's got me hung up are the indexes that dovecot maintains in each user's directory. Otherwise, I'd probably try copying the messages into Maildir/cur just to see if it worked. I could sure use some ideas about an efficient, reliable means of getting our old messages back. Thanks. -- View this message in context: http://www.nabble.com/Can-I-import-RFC822-messages-into-Dovecot-from-file-s… Sent from the Dovecot mailing list archive at Nabble.com.

2 1

[Dovecot] Antispam plugin + script sieve
by Allan Cassaro 27 Nov '08

27 Nov '08

Hi guys, I will start a little script that receive via antispam plugin an email, extract the "from" and "return-path" and create alter the sieve script of the user that send the e-mail. Well, I don't speak english very well (I speak like Borat!!!), but with some examples is better to understand: 1) Some user move an "undesirable" mail to "Automatic Block" folder 2) The antispam plugin call my script 3) The script parse the e-mail and extract the from and return-path mail 4) A rule is added to ~/.dovecot.sieve to dicard messages that came from that e-mail 5) If the user remove the mail from "Automatic Block" folder, the script remove this rule So, my question is: anyone is working on something similar with this? (I don't want to reinvent the wheel) Regards. -- "Não deixe a faculdade atrapalhar seus estudos." http://allan.cassaro.googlepages.com

1 0