- dovecot - dovecot.org

[Dovecot] dovecot bulletins?
by Maciej Uhlig 22 Jan '09

22 Jan '09

As a long term user of qpopper with bulletins, I'd like to know if the bulletin feature is planned for dovecot? I really miss bulletins :-), this is very convenient way of providing information to users. Best regards, MU

6 11

[Dovecot] docecot managesieve global filter, service name
by Wolfgang.Friebel＠desy.de 21 Jan '09

21 Jan '09

I do have two questions related to the managesieve setup in dovecot 1) I did setup a global sieve filter, that is invoked if a user has no other sieve filter. If a user installs a sieve filter and activates it (PUTSCRIPT, SETACTIVE) then the sieve filter gets compiled (.sievec) and deliver does use it. If I want to deactivate the filter (SETACTIVE "") only the symlink (to the .sieve script) is removed, the .sievec file remains intact. On the other hand the dovecot documentation reads (http://wiki.dovecot.org/LDA/Sieve) To stop using sieve, both the .sieve source file and the compiled .sievec file must be deleted How can I let a user switch between the globally installed sieve filter and an own filter. Activation seems to be ok, but deactivation would not result in the switch back to the global filter if I believe the docs. 2) To use the SASL authentication with managesieve the name of the service has to be given. In the managesieve RFC http://tools.ietf.org/html/draft-ietf-sieve-managesieve-09 I can read (page13): The service name specified by this protocol's profile of SASL is "sieve". On the other hand I can find in managesieve-0.10.4 in client-authenticate.c #define MANAGESIEVE_SERVICE_NAME "managesieve" The name is important for the Kerberos5 auth I am doing, as I have to provide a service key for managesieve.hostname@REALM instead of sieve.hostname@REALM. Currently I have adapted my auth to the "managesieve" service name but maybe that should be changed. My Installation: dovecot 1.1.8 patched for dovecot-1.1-managesieve-0.10.4 Authentication using SASL (GSSAPI), contained in the perl Module Net::ManageSieve on CPAN. -- Wolfgang Friebel Deutsches Elektronen-Synchrotron DESY Phone/Fax: +49 33762 77372/216 Platanenallee 6 Mail: Wolfgang.Friebel AT desy.de D-15738 Zeuthen Germany

2 1

[Dovecot] dovecot 1.1.8 compile error
by CJ Keist 21 Jan '09

21 Jan '09

I'm trying to compile 1.1.8 with dovecot-1-1-989789b2afd8 patches applied on Solaris 10 sparc using gcc 2.95.3 and also tried version 3.4.3. This is error I'm getting: gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-auth -DPKG_RUNDIR=\""/userM/mail-services/dovecot/var/run/dovecot"\" -DSBINDIR=\""/userM/mail-services/dovecot/sbin"\" -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -I/usr/sfw/include -c ssl-proxy-openssl.c In file included from ssl-proxy-openssl.c:21: /usr/sfw/include/openssl/ssl.h:172: warning: ignoring pragma: "@(#)ssl.h 1.4 05/10/11 SMI In file included from /usr/sfw/include/openssl/ssl3.h:120, from /usr/sfw/include/openssl/ssl.h:951, from ssl-proxy-openssl.c:21: /usr/sfw/include/openssl/ssl.h:172: warning: ignoring pragma: "@(#)ssl.h 1.4 05/10/11 SMI ssl-proxy-openssl.c: In function `ssl_params_corrupted': ssl-proxy-openssl.c:85: `PKG_STATEDIR' undeclared (first use in this function) ssl-proxy-openssl.c:85: (Each undeclared identifier is reported only once ssl-proxy-openssl.c:85: for each function it appears in.) ssl-proxy-openssl.c: In function `ssl_info_callback': ssl-proxy-openssl.c:658: warning: passing arg 1 of `SSL_get_ex_data' discards qualifiers from pointer target type *** Error code 1 make: Fatal error: Command failed for target `ssl-proxy-openssl.o' Current working directory /userM/src/dovecot-1.1.8/src/login-common *** Error code 1 The following command caused the error: failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='lib lib-dict lib-sql lib-ntlm lib-otp lib-settings lib-charset lib-mail lib-imap lib-index lib-storage lib-auth auth dict master login-common imap-login imap pop3-login pop3 deliver tests util plugins'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /userM/src/dovecot-1.1.8/src *** Error code 1 The following command caused the error: failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='src doc'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /userM/src/dovecot-1.1.8 *** Error code 1 make: Fatal error: Command failed for target `all' Does anyone have work around for this on Solaris 10? -- C. J. Keist Email: cj.keist(a)colostate.edu UNIX/Network Manager Phone: 970-491-0630 Engineering Network Services Fax: 970-491-5569 College of Engineering, CSU Ft. Collins, CO 80523-1301 All I want is a chance to prove 'Money can't buy happiness'

2 4

[Dovecot] How to interpret quota log entries?
by Pascal Volk 21 Jan '09

21 Jan '09

Hi, I've configured a global quota rule, with low limits for testing purpose: quota_rule = *:storage=10M:messages=10 Why is the percentage value always 0? What does 'enforcing' mean in this context? Is it not only relevant if one uses fs-quota? Jan 21 17:54:44 vh3 dovecot: IMAP(user(a)test.tld): Quota root: name=user backend=dict args=:proxy::quotadict Jan 21 17:54:44 vh3 dovecot: IMAP(user(a)test.tld): dict quota: user=user(a)test.tld, uri=proxy::quotadict, enforcing=0 Jan 21 17:54:44 vh3 dovecot: IMAP(user(a)test.tld): Quota rule: root=user mailbox=* bytes=10485760 (0%) messages=10 (0%) Jan 21 17:54:49 vh3 deliver(user(a)test.tld): Quota root: name=user backend=dict args=:proxy::quotadict Jan 21 17:54:49 vh3 deliver(user(a)test.tld): dict quota: user=user(a)test.tld, uri=proxy::quotadict, enforcing=0 Jan 21 17:54:49 vh3 deliver(user(a)test.tld): Quota rule: root=user mailbox=* bytes=10485760 (0%) messages=10 (0%) The current quota usage for user(a)test.tld: mailsys=# SELECT * FROM quota WHERE username = 'user(a)test.tld'; username | path | current ---------------+----------------+--------- user(a)test.tld | quota/storage | 9977225 user(a)test.tld | quota/messages | 4 # 1.1.9: /usr/local/etc/dovecot.conf # OS: OpenBSD 4.2 i386 login_dir: /usr/local/var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login login_user: _dovecot first_valid_uid: 70000 first_valid_gid: 70000 mail_location: maildir:~/Maildir mail_debug: yes mail_plugins: quota imap_quota auth default: mechanisms: plain login cram-md5 user: nobody passdb: driver: sql args: /usr/local/etc/dovecot-sql.conf userdb: driver: sql args: /usr/local/etc/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: _postfix group: _postfix master: path: /usr/local/var/run/dovecot/auth-master mode: 384 plugin: quota: dict:user::proxy::quotadict quota_rule: *:storage=10M:messages=10 mail_debug: yes dict: quotadict: pgsql:/usr/local/etc/dovecot-dict-quota.conf mail_debug: yes Regards, Pascal -- Ubuntu is an ancient African word meaning “I can’t install Debian.” -- unknown

2 1

[Dovecot] dovecot and signal SIGUSR1
by maximatt 21 Jan '09

21 Jan '09

hi.. i want to know how is defined signal "SIGUSR1" for dovecot. i want to know what dovecot do when the comand kill was executed in "Rotating logs" in http://wiki.dovecot.org/Logging.. thanks in advance!! -- Salu2 ;)

1 1

[Dovecot] Dovecot and .forward
by Claudio Prono 21 Jan '09

21 Jan '09

Hello to all, There is something to be configured to allow dovecot to use the .forward file into the user's maildir? I have done some test, but seems dovecot don't look into the .forward file and no result at all. I use Postfix with the deliver of dovecot, here is my dovecot configuration: # 1.1.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.25.18-0.2-pae i686 openSUSE 11.0 (i586) ext3 log_path: /var/log/dovecot-err.log info_log_path: /var/log/dovecot-inf.log protocols: imap imaps pop3 pop3s disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login first_valid_uid: 51 last_valid_uid: 51 first_valid_gid: 51 last_valid_gid: 51 mail_location: maildir:/var/mail/virtual/%d/%u mail_debug: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 imap_client_workarounds(default): outlook-idle imap_client_workarounds(imap): outlook-idle imap_client_workarounds(pop3): pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %Mf auth default: passdb: driver: sql args: /etc/dovecot/dovecot-mysql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot/dovecot-mysql.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 plugin: quota: maildir quota: maildir:user quota quota_warning: storage=80%% /usr/bin/quota_warning.sh 80 quota_warning2: storage=90%% /usr/bin/quota_warning.sh 90 quota_warning3: storage=99%% /usr/bin/quota_warning.sh 90 Any suggestion to debug that problem? Thank u, Claudio Prono. -- ------------ Claudio Prono Systems Development @ PSS Srl, Divisione Implementazione Sistemi Via San Bernardino, 17 - 10137 Torino (TO) - IT Tel +39-011.32.72.100 Fax +39-011.32.46.497 PGP Fingerprint: 75C2 4049 E23D 2FBF A65F 40DB EA5C 11AC C2B0 3647 Disclaimer: http://atpss.net/disclaimer ------------

2 3

[Dovecot] Questions regarding Dovecot's POP3 implementation
by Dale Gallagher 21 Jan '09

21 Jan '09

Hi all I'm considering moving over my POP3 service from qmail-pop3d to Dovecot for the following reasons: - Support for Maildir++ which I have yet to implement - Already using Dovecot for IMAP, so makes sense i.t.o Maildir++ - Support for SQL based user authentication My primary concerns are performance and security. Before I go down that route of migrating away from qmail-pop3d, I'd appreciate some answers and feedback on the following. There is mention of the Maildir filename extension W= for virtual file size here: http://wiki.dovecot.org/POP3Server However, I can't find any MDAs which support writing the filename in this format. Maildrop seems to support S= only? If Dovecot is only able to read W= in the filename, I would imagine that it might make sense to have an MDA like Maildrop write the message to disk, replacing all LF with CR+LF and finally write the filename with identical S= and W= filename extensions included? Example: Maildrop replaces all LFs with CR+LF in incoming message. Maildrop writes message as: 1035478339.27041_118.foo.org,S=1000,W=1000 (where 1000 is the file's RFC822.SIZE) Then Dovecot doesn't have to calculate virtual message sizes. I've also found this thread: http://markmail.org/message/oznf2f7m7hvsxqn6 ... which suggests changing mail_get_virtual_size to mail_get_physical_size in src/pop3/client.c Would this read the size from S=, or do a stat()? 5. Does anyone use Dovecot pop3 service on thousands of mailboxes and if so, what specific tweaks / setup do you use? Thanks Dale

1 0

[Dovecot] deliver rejection bounces
by Timo Sirainen 21 Jan '09

21 Jan '09

Is there any reason not to make (for v1.2) 1) deliver -e behavior the defaut? 2) not even provide the option for the current default (have deliver send bounces itself)? The only reason it even works like it does currently is because I just mostly copied what Cyrus did.

7 13

[Dovecot] Active Directory authentication
by Dimitrios Karapiperis 21 Jan '09

21 Jan '09

Hello all I would like to ask if there is adequate mechanism to authenticate users through POP3 against Active Directory by Outlook Express so that users will authenticate seamlessly using logon credentials. I have implemented LDAP authentication but users must supply their credentials to Outlook Express although they have logged on to Windows (AD). the ntlm auth in Dovecot 1.1 (windind) satisies this requirement (no credentials in Outlook)? thanks Dimitrios

2 1

[Dovecot] Imap auth problems
by Noah Silverman 21 Jan '09

21 Jan '09

Hi, We're having some really weird auth problems trying to setup a very basic dovecot imap server. Even stranger is that we don't see any of the debug information in the logs even though we've set all the debug options to true. Can anybody provide some suggestions. Thanks, -Noah ------------------------------------------------------------------------------------------------------------------ Our log files just show this: dovecot: Jan 20 14:09:20 Info: imap-login: Disconnected (no auth attempts): rip=xxx.xxx.xxx.xxx, lip=xxx.xxx.xxx.xxx dovecot: Jan 20 14:09:20 Info: imap-login: Disconnected (no auth attempts): rip=xxx.xxx.xxx.xxx, lip=xxx.xxx.xxx.xxx dovecot: Jan 20 14:09:21 Info: auth(default): new auth connection: pid=14706 dovecot: Jan 20 14:09:21 Info: auth(default): new auth connection: pid=14707 ---------------------------------------------------------------------------- Our dovecot -n is: # 1.1.8: /usr/local/etc/dovecot.conf # OS: FreeBSD 6.2-RC2 i386 log_path: /var/log/dovecot info_log_path: /var/log/dovecot protocols: imap pop3 ssl_disable: yes verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login first_valid_gid: 0 mail_location: maildir:~/Maildir mail_debug: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape- eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /usr/local/etc/dovecot.passwd userdb: driver: passwd-file args: username_format=%n /usr/local/etc/dovecot.passwd

2 2