- dovecot - dovecot.org

[Dovecot] auth failed, 0 attempts
by Bruce Bodger 26 Aug '08

26 Aug '08

Does anyone have any ideas what this may be? Aug 25 12:19:01 G520X2 dovecot: imap-login: Disconnected (auth failed, 0 attempts): rip=192.168.1.1, lip=192.168.1.10 Aug 25 12:19:01 G520X2 dovecot: imap-login: Disconnected (auth failed, 0 attempts): rip=192.168.1.1, lip=192.168.1.10 Hits the server every minute. Running v 1.1.2 on OS X 192.168.1.1 is the router 192.168.1.10 is the server on which dovecot is running. Just started noticing it. Thanks, B. Bodger

2 2

[Dovecot] Issue with: Sendmail, Dovecot and Sieve: -- TECRA_A9 --
by dovecot＠guice.ath.cx 25 Aug '08

25 Aug '08

sendmail -- Version 8.14.2 Compiled with: DNSMAP LOG MAP_REGEX MATCHGECOS MILTER MIME7TO8 MIME8TO7 NAMED_BIND NETINET NETINET6 NETUNIX NEWDB NIS PIPELINING SASLv2 SCANF STARTTLS TCPWRAPPERS USERDB XDEBUG dovecot-1.0.7 Secure and compact IMAP and POP3 servers dovecot-sieve-1.0.2 A sieve plugin for the Dovecot LDA called 'deliver' With focus on the installed version of sieve, shown above, the following rule is within our ~.dovecot.sieve: } elsif header :is "X-Original-To" "dovecot(a)dovecot.org" { discard; stop; } The above rule is the seventh and last rule in the file, however the following mail is 'not being discarded'. Should this not be the appropriate forum, please direct me to the proper list and/or forum. Respectfully yours, dovecot_user

2 2

[Dovecot] LOCALSTATEDIR
by Radomir Zoltowski 25 Aug '08

25 Aug '08

Hi > make distclean between builds solved the issue. Apologies for the noise. Regards, Radomir Zoltowski -- _________________________________________________________ Radomir Zoltowski <Radomir.Zoltowski(a)s3group.com> Applications Engineer Silicon & Software Systems Ltd., IT Department South County Business Park, Leopardstown, Dublin 18, IRELAND Tel.: +353 1 291 1224, Fax: +353 1 291 1001 _________________________________________________________ The information contained in this e-mail and in any attachments is confidential and is designated solely for the attention of the intended recipient(s). If you are not an intended recipient, you must not use, disclose, copy, distribute or retain this e-mail or any part thereof. If you have received this e-mail in error, please notify the sender by return e-mail and delete all copies of this e-mail from your computer system(s). Please direct any additional queries to: communications(a)s3group.com. Thank You. Silicon and Software Systems Limited. Registered in Ireland no. 378073. Registered Office: South County Business Park, Leopardstown, Dublin 18

1 0

[Dovecot] LOCALSTATEDIR
by Radomir Zoltowski 25 Aug '08

25 Aug '08

Hi I'm doing a network install of Dovecot 1.1.2. All is fine apart from a little annoying mistake I've found: I do this: > ./configure --prefix=/appli/tools_Linux/dovecot/1.1.2 --localstatedir=/var && make && make install however, since the --localstatedir is equal to a default value, it is still being constructed as "PREFIX/var" for some reason and in effect produces binary with following strings being built-in: > strings dovecot | grep var /appli/tools/dovecot/1.1.2/var/lib/dovecot /appli/tools/dovecot/1.1.2/var/run/dovecot /appli/tools/dovecot/1.1.2/var/lib/dovecot/ssl-parameters.dat /appli/tools/dovecot/1.1.2/var/lib/dovecot/ssl-parameters.dat var-expand.c var_expand_table_build So, the question is, is this a bug or my understanding wrong? I just need a network install, using local /var directiories for runtime data. Imagine that I have no write permissions to the installation (--prefix) folder. If you can reproduce it, this should be it, if you can't let me know to email you all the environment details. Regards, Radomir Zoltowski -- _________________________________________________________ Radomir Zoltowski <Radomir.Zoltowski(a)s3group.com> Applications Engineer Silicon & Software Systems Ltd., IT Department South County Business Park, Leopardstown, Dublin 18, IRELAND Tel.: +353 1 291 1224, Fax: +353 1 291 1001 _________________________________________________________ The information contained in this e-mail and in any attachments is confidential and is designated solely for the attention of the intended recipient(s). If you are not an intended recipient, you must not use, disclose, copy, distribute or retain this e-mail or any part thereof. If you have received this e-mail in error, please notify the sender by return e-mail and delete all copies of this e-mail from your computer system(s). Please direct any additional queries to: communications(a)s3group.com. Thank You. Silicon and Software Systems Limited. Registered in Ireland no. 378073. Registered Office: South County Business Park, Leopardstown, Dublin 18

1 0

[Dovecot] Override config in deliver command line
by dovecot＠iotti.biz 25 Aug '08

25 Aug '08

Hi all In dovecot deliver LDA, is there a way to override some configuration settings for particular users? Tha full story is: I have a simple postfix/dovecot setup. No virtual users, delivery is done in /home/mail/%u. For a specific user, I would like to deliver to a maildir. Since mail_location is not explicitly configured, I simply created ~/Maildir for that user, relying on the default automatic mailbox location procedure used by dovecot. But I would like to be able to override this setting: for example if I wanted to use a name different from Maildir, this trick would not be sufficient. So it would be nice to have some way to change mail_location (and why not, other config parameters) only for particular users (and for me, doing this on the command line would be good: something like Postfix where you can override config parameters simply writing the new settings in master.cf on the daemon's command line). I noticed the -c command line switch, but I would prefer not to have entirely different configuration files for my users, where a single change must be manually propagated on all the files. I use dovecot-1.0.15 on CentOS5. Maybe this question can be read as a feature request too. Thanks Luigi

2 1

[Dovecot] Errors with dovecot 1.1.2
by Lauri Jesmin 25 Aug '08

25 Aug '08

Hello, i upgraded dovecot to 1.1.2 this weekend and i get those errors: grep dovecot /var/log/net/maillog |grep Panic | cut -d " " -f 11-100| sort | uniq -c | sort -rn 7368 file index-sync.c: line 39: assertion failed: (seq_range_exists(&ibox->recent_flags, uid)) 71 file index-mail.c: line 1091: assertion failed: (! mail->data.destroying_stream) 18 file mbox-sync-rewrite.c: line 590: assertion failed: (mails[idx].from_offset == start_offset) 5 file mbox-lock.c: line 675: assertion failed: (lock_type == F_RDLCK || mbox->mbox_lock_type != F_RDLCK) 3 file ostream-file.c: line 533: assertion failed: ((size_t)ret == total_size || !fstream->file) My setup is this: 3 servers, all Solaris, running dovecot, share home directiories via NFS, mbox format mailboxes in home directories. Indexes are separate in every server, not shared via NFS. About 20 000 users total. When old indexes (1.0.15) were present, mailboxes with UID validity problems did not fix themselves, but after i removed index directories in all machines, seems like it started to repair uid validity problems. The first panic seems to be tied to UID validity problems. Some locking problems may be, because i renamed index directory and created new while dovecot was running. -- Lauri Jesmin <lauri.jesmin(a)ut.ee> Tartu Ülikool

1 0

[Dovecot] Postfix and Dovecot SASL authentication error
by sharad kanekar 25 Aug '08

25 Aug '08

ear All, I configured Postfix 2.3.3-2 on CentOS 5.2 using SASL Dovecot authentication put I am facing the problem to receive mails . My postconf -n result is: [root@mails ~]# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 html_directory = no inet_interfaces = all mail_owner = postfix mail_spool_directory = /var/spool/mail mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost mydomain = coreteamsolutions.in myhostname = mails.coreteamsolutions.in mynetworks = 192.168.1.0/24, 127.0.0.0/8 mynetworks_style = subnet myorigin = $myhostname newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot unknown_local_recipient_reject_code = 550 And my /var/log/maillog is: Aug 23 19:01:03 mails dovecot: Dovecot v1.0.rc15 starting up Aug 23 19:01:55 mails postfix/smtpd[3472]: warning: SASL: Connect to private/auth failed: No such file or directory Aug 23 19:01:55 mails postfix/smtpd[3472]: fatal: no SASL authentication mechanisms Aug 23 19:01:56 mails postfix/master[3407]: warning: process /usr/libexec/postfix/smtpd pid 3472 exit status 1 Aug 23 19:01:56 mails postfix/master[3407]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling Aug 23 19:02:56 mails postfix/smtpd[3507]: warning: SASL: Connect to private/auth failed: No such file or directory Aug 23 19:02:56 mails postfix/smtpd[3507]: fatal: no SASL authentication mechanisms Aug 23 19:02:57 mails postfix/master[3407]: warning: process /usr/libexec/postfix/smtpd pid 3507 exit status 1 Aug 23 19:02:57 mails postfix/master[3407]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling Aug 23 19:11:08 mails postfix/smtpd[3579]: warning: SASL: Connect to private/auth failed: No such file or directory Aug 23 19:11:08 mails postfix/smtpd[3579]: fatal: no SASL authentication mechanisms Aug 23 19:11:09 mails postfix/master[3407]: warning: process /usr/libexec/postfix/smtpd pid 3579 exit status 1 Aug 23 19:11:09 mails postfix/master[3407]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling Aug 23 19:12:09 mails postfix/smtpd[3582]: warning: SASL: Connect to private/auth failed: No such file or directory Aug 23 19:12:09 mails postfix/smtpd[3582]: fatal: no SASL authentication mechanisms Aug 23 19:12:10 mails postfix/master[3407]: warning: process /usr/libexec/postfix/smtpd pid 3582 exit status 1 Aug 23 19:12:10 mails postfix/master[3407]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling And our server 's fetchmail -vvv log is: [sharad@mails ~]$ fetchmail -vvv fetchmail: 6.3.6 querying coreteamsolutions.in (protocol POP3) at Sat 23 Aug 2008 07:13:41 PM IST: poll started Trying to connect to 66.7.148.25/110...connected. fetchmail: POP3< +OK Hello there. fetchmail: POP3> CAPA fetchmail: POP3< +OK Here's what I can do: fetchmail: POP3< STLS fetchmail: POP3< TOP fetchmail: POP3< USER fetchmail: POP3< LOGIN-DELAY 10 fetchmail: POP3< PIPELINING fetchmail: POP3< UIDL fetchmail: POP3< IMPLEMENTATION Courier Mail Server fetchmail: POP3< . fetchmail: POP3> USER sharad(a)coreteamsolutions.in fetchmail: POP3< +OK Password required. fetchmail: POP3> PASS * fetchmail: POP3< +OK logged in. fetchmail: selecting or re-polling default folder fetchmail: POP3> STAT fetchmail: POP3< +OK 1 805 fetchmail: POP3> LAST fetchmail: POP3< -ERR Invalid command. fetchmail: Invalid command. fetchmail: POP3> UIDL fetchmail: POP3< +OK fetchmail: POP3< 1 UID60-1217729843 fetchmail: 1 is unseen fetchmail: POP3< . 1 message for sharad(a)coreteamsolutions.in at coreteamsolutions.in (805 octets). fetchmail: POP3> LIST 1 fetchmail: POP3< +OK 1 805 fetchmail: POP3> TOP 1 99999999 fetchmail: POP3< +OK headers follow. reading message sharad@coreteamsolutions.in@coreteamsolutions.in:1 of 1 (805 octets) About to rewrite Return-Path: <sharad(a)coreteamsolutions.in> Rewritten version is Return-Path: <sharad(a)coreteamsolutions.in> About to rewrite From: <sharad(a)coreteamsolutions.in> Rewritten version is From: <sharad(a)coreteamsolutions.in> About to rewrite To: <sharad(a)coreteamsolutions.in> Rewritten version is To: <sharad(a)coreteamsolutions.in> Trying to connect to 127.0.0.1/25...connected. fetchmail: smtp listener protocol error Trying to connect to 127.0.0.1/25...connected. fetchmail: smtp listener protocol error fetchmail: SMTP connect to localhost failed fetchmail: POP3> QUIT fetchmail: POP3< This is an e-mail message sent automatically by Microsoft Office Outlook's Account Manager while testing the settings for your POP3 account. fetchmail: SMTP transaction error while fetching from sharad@coreteamsolutions.in@coreteamsolutions.in and delivering to SMTP host localhost fetchmail: 6.3.6 querying coreteamsolutions.in (protocol POP3) at Sat 23 Aug 2008 07:13:56 PM IST: poll completed fetchmail: discarding new UID list fetchmail: Query status=10 (SMTP) fetchmail: Deleting fetchids file. fetchmail: normal termination, status 10 fetchmail: Deleting fetchids file. please help me to rectify this problem. Thanks and Regards, -- Thanks and Regards, Sharad Kanekar

5 4

Re: [Dovecot] password issue
by Chris Buckley 25 Aug '08

25 Aug '08

On Mon, 25 Aug 2008, gishaust wrote: >> Easily fixed. (You are using MD5 for your passphrases, right?) >> >> in dovecot-sql.conf >> default_pass_scheme = MD5 >> >> /etc/init.d/dovecot restart >> >> That should work. >> > > It work great thankyou for your help. You find this on the ubuntu server > forum as I have posted the same issue and never got a response now i show it > solved thanks again this has been a week long issue. No problem. Please remember to keep dovecot-mailing-list on CC (reply-to-all) so others can benefit. NB: I would recommend looking at CentOS/Red Hat for a proper Enterprise Server OS. All the best, -- Kind Regards, :: http://www.cjbuckley.net/ Chris Buckley :: http://photos.cjbuckley.net/

1 0

Re: [Dovecot] password issue
by Chris Buckley 25 Aug '08

25 Aug '08

On Mon, 25 Aug 2008, gishaust wrote: > dovecot-mysql.conf and then restarted dovecot. then telnet and came up with > the same issue Right - we're getting there then..! :) > the log says the following > > Aug 25 10:09:12 mta dovecot: Dovecot v1.0.10 starting up > Aug 25 10:09:13 mta dovecot: auth-worker(default): mysql: Connected to > 127.0.0.1 (postfix) > Aug 25 10:11:33 mta dovecot: auth-worker(default): > plain_md5_verify(sal(a)prt.com): Invalid password encoding Easily fixed. (You are using MD5 for your passphrases, right?) in dovecot-sql.conf default_pass_scheme = MD5 /etc/init.d/dovecot restart That should work. -- Kind Regards, :: http://www.cjbuckley.net/ Chris Buckley :: http://photos.cjbuckley.net/

1 0

[Dovecot] password issue
by gishaust 25 Aug '08

25 Aug '08

hi everyone I am new to dovecot and I am having a little trouble I am getting this error in my mail.log I have google it and can't find a response, Aug 25 08:14:24 mta dovecot: auth-worker(default): mysql: Connected to 127.0.0.1 (postfix) Aug 25 08:14:24 mta dovecot: auth-worker(default): sql(sal(a)prt.com,127.0.0.1): Password query failed: Table 'postfix.password' doesn't exist Aug 25 08:17:22 mta dovecot: pop3-login: Disconnected: Inactivity: user=<sal(a)prt.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured The error comes when I telnet in Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. +OK Dovecot ready. user sal(a)prt.com +OK pass ******** -ERR Temporary authentication failure. This is the current setup. dovecot -n, # 1.0.10: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: pop3 pop3s imap imaps disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_location: maildir:/home/vmail/%d/%n/Maildir mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv namespace: type: private separator: . prefix: INBOX. inbox: yes auth default: mechanisms: plain login passdb: driver: pam passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: static args: uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail Mysql database for email, host=127.0.0.1 dbname=postfix user=postfix password= ********* Table =mailbox User is = user Column password = password vim /etc/dovecot/dovecot-sql.conf has the following connect = host=127.0.0.1 dbname=postfix user=postfix password=******* default_pass_scheme = PLAIN-MD5 password_query = SELECT mailbox as user, password FROM password WHERE email='%u';

2 1