- dovecot - dovecot.org

Re: [Dovecot] outlook2007 shows frequent imap disconnect no matterwhat, outlook-idle setting in dovecot.conf
by Javier García 31 Mar '08

31 Mar '08

Hello all, I configured imap_client_workarounds = outlook-idle after a customers complaint (Windows Vista, Outlook 2007) and after a week, she reports me that the issue has never repeated. So it has worked for me. I am running 1.0.rc15 (as from the original post) on a Debian etch box. Regards, Javier > Message: 2 > Date: Mon, 31 Mar 2008 07:34:00 +0200 > From: "Kielbasiewicz, Peter" <peter.kielbasiewicz(a)philips.com> > Subject: Re: [Dovecot] outlook2007 shows frequent imap disconnect no > matterwhat outlook-idle setting in dovecot.conf > To: "dovecot(a)dovecot.org" <dovecot(a)dovecot.org> > Message-ID: > <042A6AAA4FA2494FB87EC7AE1FE227AD629BB94850(a)nlamsexm01.connect1.local> > Content-Type: text/plain; charset="iso-8859-1" > > > I updated to the latest rev from atrpms.net which is 1.0.13 and I see the same behaviour. > No matter if I set "imap_client_workarounds = outlook-idle" or "imap_client_workarounds =" I get those disconnect popups. It seems that the setting has no effect. > > Is there someone who had success by applying the setting with outlook 2007? > > Peter > > > > >> -----Original Message----- >> From: dovecot-bounces+peter.kielbasiewicz=philips.com(a)dovecot.org >> [mailto:dovecot-bounces+peter.kielbasiewicz=philips.com@dovecot.org] On >> Behalf Of Samuel HAMEAU >> Sent: Freitag, 28. M?rz 2008 11:11 >> Cc: dovecot(a)dovecot.org >> Subject: Re: [Dovecot] outlook2007 shows frequent imap disconnect no >> matterwhat outlook-idle setting in dovecot.conf >> >> Scott Silva a ?crit : >> >>> on 3-26-2008 1:33 AM Kielbasiewicz, Peter spake the following: >>> >>>> Hello, >>>> I saw the problem quite often in various posts but could not find a >>>> real solution . >>>> Problem is that I frequently get annoying popups from outlook 2007 >>>> about imap idle timeouts which block working with outlook until the >>>> popup is acknowledged. >>>> >>>> The popup says: >>>> Your IMAP server closed the connection. This can occur if you leave >>>> the connection idle for too long. >>>> Protocol: IMAP >>>> Server: testhost >>>> Port: 143 >>>> Error Code: 0x800CCCDD >>>> >>>> I tried to run dovecot with or without "imap_client_workarounds = >>>> outlook-idle" but do not see any difference. >>>> I am running dovecot on Red Hat Enterprise Linux Client release 5.1 >>>> (Tikanga). >>>> Below is the output of some commands to get a clue about my config. >>>> >>>> Background info: >>>> Our primary mailboxes are on exchange servers. >>>> As there is a size limit on the server mailboxes I am evaluating a >>>> local storage solution for our users. >>>> Thus I set up an additional mailbox in outlook using IMAP. >>>> Local .pst files can not be backuped easily (especially when outlook >>>> is running) and I am investigating a local IMAP server where users >>>> >> can >> >>>> move their mails to. This server can easily be backuped (even >>>> incrementally when using Maildir) and users do always have access >>>> >> to >> >>>> their mails. >>>> The drawbacks are that users must have an extra login to the imap >>>> server because I have no ldap access to the company AD server from >>>> >> our >> >>>> local site domain. >>>> The solution will not be accepted though if I can not prevent the >>>> frequent disconnect popups. >>>> >>>> Peter >>>> >>>> >>>> #dovecot --version >>>> 1.0.rc15 >>>> >>> First try upgrading to a more current version. 1.0.rc15 has got to be >>> >> a >> >>> year old by now. You can get a newer rpm at atrpms.net. >>> >>> >> I do have the same problem with dovecot 1.0.10 : disconnection popups >> with Outlook 2003/2007 with this kind of line in the logs: >> dovecot: 2008-03-26 15:16:01 Info: IMAP(user): Connection closed: >> Connection reset by peer >> >> sam >> > > > ------------------------------ > > _______________________________________________ > dovecot mailing list > dovecot(a)dovecot.org > http://dovecot.org/cgi-bin/mailman/listinfo/dovecot > > End of dovecot Digest, Vol 59, Issue 78 > *************************************** >

1 0

[Dovecot] Flags can be changed in read-only mode
by Ron Avriel 30 Mar '08

30 Mar '08

Hi, It seems that IMAP flags can be changed in EXAMINE read-only mode. Luckily, messages cannot be expunged. This happens in both dovecot 1.0.12 and 1.1.rc3: * OK Dovecot ready. 1 login *** *** 1 OK Logged in. 2 examine inbox * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS ()] Read-only mailbox. * 1 EXISTS * 1 RECENT * OK [UNSEEN 1] First unseen. * OK [UIDVALIDITY 1206865015] UIDs valid * OK [UIDNEXT 2] Predicted next UID 2 OK [READ-ONLY] Select completed. 3 fetch 1:* flags * 1 FETCH (FLAGS (\Recent)) 3 OK Fetch completed. 4 store 1:* +flags (\Deleted) * 1 FETCH (FLAGS (\Deleted \Recent)) 4 OK Store completed. 5 fetch 1:* flags * 1 FETCH (FLAGS (\Deleted \Recent)) 5 OK Fetch completed. 6 expunge 6 OK Expunge completed. 7 fetch 1:* flags * 1 FETCH (FLAGS (\Deleted \Recent)) 7 OK Fetch completed. Thanks, Ron ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

2 1

[Dovecot] Proxy Problems
by Richard Cooper 28 Mar '08

28 Mar '08

Hi, I'm trying to use dovecot as a proxy as described on http://wiki.dovecot.org/PasswordDatabase/ExtraFields/Proxy but without much success. The problem is that when I send a IMAP login command dovecot is responding with "BYE Internal login failure. Refer to server log for more information." Can anyone help me shed light on this problem? Here's the log (Username, password and IPs have been anonymised): dovecot: Mar 27 13:07:11 Info: Dovecot v1.0.rc15 starting up dovecot: Mar 27 13:07:12 Info: auth(default): passwd-file /root/ dovecot-proxy-test.passwd: Read 1 users dovecot: Mar 27 13:07:29 Info: auth(default): client in: AUTH 1 PLAIN service=IMAP lip=192.168.0.1 rip=192.168.0.2 resp=WWVzIEkgYW5vbnltaXNlZCB0aGlzIHRvbyA7LSk= dovecot: Mar 27 13:07:29 Info: auth(default): client out: OK 1 user=test_proxy proxy host=192.168.0.3 port=143 pass=password dovecot: Mar 27 13:07:29 Info: auth(default): master in: REQUEST 1 11786 1 dovecot: Mar 27 13:07:29 Error: auth(default): Master request 11786.1 not found dovecot: Mar 27 13:07:29 Info: auth(default): master out: NOTFOUND 1 dovecot: Mar 27 13:07:29 Info: imap-login: Internal login failure: user=<test_proxy>, method=PLAIN, rip=192.168.0.2, lip=192.168.0.1 And here's my config according to dovecot -n # /root/dovecot-proxy-test.conf base_dir: /var/run/dovecot-proxy-test log_path: /dev/stderr protocols: imap listen: *:10143 login_dir: /var/run/dovecot-proxy-test/login login_executable: /usr/libexec/dovecot/imap-login auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /root/dovecot-proxy-test.passwd userdb: driver: static args: uid=0 gid=0 /root/dovecot-proxy-test.passwd contains a single line: test_proxy:::::::proxy=y host=192.168.0.3 port=143 I am on Cent OS 5 using dovecot version 1.0.rc15 from their official yum repositories. If I connect my client directly to 192.168.0.3:143 using the same username and password everything works correctly. Thanks in advance. - Richard

2 2

[Dovecot] Using LDA with postfix and virtual users
by Chris Cohen 28 Mar '08

28 Mar '08

Hi list, I have 7 virtual users in a sql database. I don't want any systemusers or local delivery using postfix. On the postfix side everything works fine as long as I use the 'local' delivery agent. But since I want to use dovecot's sieve functionality I set local_transport to dovecot. From now on Postfix seems to ignore local_* settings like local_recipient_maps. Here is my current configuration: log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps managesieve login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_privileged_group: mail mail_location: maildir:/var/mail/%u mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve sieve_storage(default): sieve_storage(imap): sieve_storage(managesieve): /var/mail/%u/dovecot/sieve/ sieve(default): sieve(imap): sieve(managesieve): /var/mail/%u/.dovecot.sieve auth default: mechanisms: plain login verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: static args: uid=5000 gid=5000 home=/var/mail/%u socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: sieve: /var/mail/%u/.dovecot.sieve And my postfix configuration: alias_maps = mysql:/etc/postfix/alias_maps-mysql.cf command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/lib/postfix data_directory = /var/lib/postfix inet_interfaces = all local_recipient_maps = mysql:/etc/postfix/local_recipients-mysql.cf $alias_maps local_transport = dovecot mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = unixhosts.org myhostname = amy.unixhosts.org mynetworks = 127.0.0.0/8 myorigin = $myhostname smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) unknown_local_recipient_reject_code = 550 And accourding to the wiki I have: dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user} As soon as I set local_transport to dovecot postfix seems to lookup local_recipients using dovecot. And dovecot doesn't know anything about my alias table. Heres a small log: Mar 28 14:49:25 amy postfix/smtpd[4412]: warning: 10.1.32.13: address not listed for hostname amy.unixhosts.org Mar 28 14:49:25 amy postfix/smtpd[4412]: connect from unknown[10.1.32.13] Mar 28 14:49:25 amy postfix/smtpd[4412]: 820D478399: client=unknown[10.1.32.13] Mar 28 14:49:25 amy postfix/cleanup[4415]: 820D478399: message-id=<20080328134925.5E3954C444(a)zoidberg.unixhosts.org> Mar 28 14:49:25 amy postfix/qmgr[4410]: 820D478399: from=<virtualuser(a)daisy.unixhosts.org>, size=762, nrcpt=1 (queue active) Mar 28 14:49:25 amy postfix/smtpd[4412]: disconnect from unknown[10.1.32.13] Mar 28 14:49:25 amy dovecot: auth(default): master in: USER^I1^Iroot^Iservice=deliver Mar 28 14:49:25 amy dovecot: auth-worker(default): sql(root): query: SELECT password FROM users WHERE username = 'root'; Mar 28 14:49:25 amy dovecot: auth-worker(default): sql(root): unknown user Mar 28 14:49:25 amy dovecot: auth(default): master out: NOTFOUND^I1 Mar 28 14:49:25 amy postfix/pipe[4416]: 820D478399: to=<root(a)daisy.unixhosts.org>, relay=dovecot, delay=0.09, delays=0.03/0.02/0/0.04, dsn=5.1.1, status=bounced (user unknown) Mar 28 14:49:25 amy postfix/cleanup[4415]: 914C978407: message-id=<20080328134925.914C978407(a)amy.unixhosts.org> Mar 28 14:49:25 amy postfix/qmgr[4410]: 914C978407: from=<>, size=2516, nrcpt=1 (queue active) Mar 28 14:49:25 amy postfix/bounce[4418]: 820D478399: sender non-delivery notification: 914C978407 Mar 28 14:49:25 amy postfix/qmgr[4410]: 820D478399: removed Mar 28 14:49:25 amy dovecot: auth(default): master in: USER^I1^Ivirtualuser^Iservice=deliver Mar 28 14:49:25 amy dovecot: auth-worker(default): sql(virtualuser): query: SELECT password FROM users WHERE username = 'virtualuser'; Mar 28 14:49:25 amy dovecot: auth(default): password(virtualuser): Credentials: {CRYPT}{PLAIN-MD5}ebb12eb47da2af187241a0d74fc3d14f Mar 28 14:49:25 amy dovecot: auth(default): master out: USER^I1^Ivirtualuser^Iuid=5000^Igid=5000^Ihome=/var/mail/virtualuser Mar 28 14:49:25 amy postfix/pipe[4416]: 914C978407: to=<virtualuser(a)daisy.unixhosts.org>, relay=dovecot, delay=0.03, delays=0.01/0/0/0.02, dsn=2.0.0, status=sent (delivered via dovecot service) Mar 28 14:49:25 amy postfix/qmgr[4410]: 914C978407: removed I have already read a lot of documentation, howtos and so on, but just can't figure out how to get this to work. Could someone please give me a hint? -- Greetings Chris

1 0

[Dovecot] Mailbox to maildir conversion
by Aaron Gallagher 28 Mar '08

28 Mar '08

I just today wrote Yet Another Conversion Script. This one differs from the rest that I've seen in that it will generate a dovecot- uidlist index. I've done some testing, but not any absolutely extensive testing. It works well from what I've tried. Invocation is simple. You pass the script the maildir and the mailbox file and it parses the mailbox file. The index file is generated if there is at least one e-mail with an X-IMAP header which contains the last ID used and the IMAP UIDVALIDITY. My old mail setup was ipop3d + sendmail (now dovecot + postfix) and it had a DON'T DELETE THIS MESSAGE e-mail with the aforementioned X-IMAP header. This e-mail will not be saved in the maildir. All e-mails with an X-UID header will get an entry in the uidlist file. The script works with python 2.3 or later. I haven't tested it on pre-2.3 python versions as I don't have any installed. http://habnabit.org/mb2md.py.gz I can answer questions about it if needed. I'm also willing to try to add any suggested features.

1 0

[Dovecot] Dovecot Startup error on FreeBSD
by Dien Phan 28 Mar '08

28 Mar '08

Hi, I have installed latest Dovecot 1.0.13 on a FreeBSD 6.2 with XMail (www.xmailserver.org) It works OK except one thing: error on startup. After each reboot there are lots of such error: dovecot: Mar 28 08:54:38 Error: child 916 (login) returned error 89 dovecot: Mar 28 08:54:54 Error: imap-login: No authentication sockets found When I restart dovecot by running startup script /usr/local/etc/rc.d/dovecot.sh restart the problem disappears. I have to manually restart dovecot after each reboot. Below is used conf file $ dovecot -n # 1.0.13: /usr/local/etc/dovecot.conf log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot-info.log protocols: imap ssl_disable: yes disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login mail_location: maildir:~/Maildir dotlock_use_excl: yes maildir_copy_with_hardlinks: yes mail_plugins: antispam imap_client_workarounds: delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep auth default: verbose: yes passdb: driver: checkpassword args: /var/MailRoot/bin/dovecot_xmail userdb: driver: static args: uid=vxmail gid=vxmail home=/var/MailRoot/domains/%d/%n allow_all_users=yes socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 user: vxmail plugin: antispam_signature: X-DSPAM-Signature antispam_trash: Trash antispam_spam: SPAM antispam_dspam_binary: /usr/local/bin/dspam antispam_dspam_args: --user;%u I googled and found similar post at http://www.mail-archive.com/dovecot@dovecot.org/msg01793.html, http://www.mail-archive.com/dovecot@dovecot.org/msg01798.html and http://www.mail-archive.com/dovecot@dovecot.org/msg01831.html but answers there don't meet my case. I don't use sql backend. And startup script doesn't delete /var/run/dovecot/ directory after Dovecot is started. After booting when error still there I have in this directory: $ ls /var/run/dovecot auth-master dict-server login master.pid If restart dovecot (working OK): $ ls /var/run/dovecot auth-master auth-worker.960 dict-server login master.pid As we see dovecot works when there appears a file named auth-worker.960 (the number 960 changes each time it restarted). Please help me to fix this. Thanks in advance. Dien Phan

2 1

[Dovecot] dovecot-1.1.rc3 segmentation fault in fetch_bodystructure
by Diego Liziero 27 Mar '08

27 Mar '08

Hi, another imap crash with latest dovecot. segmentation fault in fetch_bodystructure src/imap/imap-fetch.c static int fetch_bodystructure(struct imap_fetch_context *ctx, struct mail *mail, void *context ATTR_UNUSED) { const char *bodystructure; if (mail_get_special(mail, MAIL_FETCH_IMAP_BODYSTRUCTURE, &bodystructure) < 0) return -1; ---> before the segfault here we have bodystructure=0 and mail_get_special returns >=0 [..] if (o_stream_send(ctx->client->output, "BODYSTRUCTURE (", 15) < 0 || /*line 461*/ o_stream_send_str(ctx->client->output, bodystructure) < 0 || ---> here o_stream_send_str calls strlen(bodystructure=0), and strlen tries to access "Address 0x0" causing a segfault -- Address 0x0 is not stack'd, malloc'd or (recently) free'd Process terminating with default action of signal 11 (SIGSEGV): dumping core Access not within mapped region at address 0x0 at: strlen by: o_stream_send_str (ostream.c:163) by: fetch_bodystructure (imap-fetch.c:461) by: imap_fetch (imap-fetch.c:309) by: cmd_fetch (cmd-fetch.c:154) by: client_command_input (client.c:546) by: client_command_input (client.c:595) by: client_handle_input (client.c:636) by: client_input (client.c:691) by: io_loop_handler_run (ioloop-epoll.c:201) by: io_loop_run (ioloop.c:301) by: main (main.c:293)

3 6

[Dovecot] xexec and dovecot 1.1
by Alex 27 Mar '08

27 Mar '08

Patch and prepatched version of xexec module to dovecot v1.1 now available from http://wiki.dovecot.org/Plugins/xexec. Thanks for patch to Stephan Bosch.

7 17

[Dovecot] pop3 with out LAST command
by Antonio Casado Rodríguez 27 Mar '08

27 Mar '08

Hi, One user has your client in Yahoo Webmail and he had configured pop3 acount with our servers. The Yahoo Webmail said to him: "The server not have the LAST command." We have dovecot 1.0.10 in linux. ¿This command is in Dovecot? ¿how? Regards.

2 1

[Dovecot] (userdb/ldap) Set home dovecot variable - How?
by k bah 27 Mar '08

27 Mar '08

Dovecot version dovecot-1.0.rc14-7 (opensuse) Postfix is using Dovecot LDA. I'm getting this error message, and I guess it's going to be a problem on my next task, which is to set up sieve scripts. Is there something wrong/contraditory on my config or I forgot something? I want: /var/dovecot-tests/: where user's inbox resides /var/dovecot-tests/home/: home dir (users will not be system users, this home is for sieve) /var/dovecot-tests/data/: mbox --- error msg --- --- --- --- auth(default): client in: AUTH 1 PLAIN service=IMAP lip=dovecot_machine_ip rip=client_ip auth(default): client out: CONT 1 auth(default): client in: CONT 1 AHRoYWlzY2diAHRyb2NhcjEyMw== auth(default): ldap(someuser,client_ip): bind search: base=dc=mydomain,dc=me filter=(&(object class=inetlocalmailrecipient)(uid=someuser)) auth(default): ldap(someuser,client_ip): result: mail(user)=someuser auth(default): ldap(someuser,client_ip): bind: dn=cn=112345,ou=people,dc=mydomain,dc=me auth(default): client out: OK 1 user=someuser auth(default): master in: REQUEST 9 13177 1 auth(default): ldap(someuser,client_ip): user search: base=dc=mydomain,dc=me scope=subtree fi lter=(&(objectclass=inetlocalmailrecipient)(mail=someuser)) fields=uid, uid auth(default): master out: USER 9 someuser user=someuser uid=1500 gid=12 imap-login: Login: user=<someuser>, method=PLAIN, rip=client_ip, lip=dovecot_machine_ip debug ('someuser' 'someuser' '' 'IMAP' '/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB' '1500 ')Effective uid=1500, gid=12 debug ('someuser' 'someuser' '' 'IMAP' '/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB' '1500 ')Namespace: type=private, prefix=, sep=/, inbox=yes, hidden=no, subscriptions=no debug ('someuser' 'someuser' '' 'IMAP' '/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB' '1500 ')mbox: data=/var/dovecot-test/data/someuser:INBOX=/var/dovecot-test/someuser debug ('someuser' 'someuser' '' 'IMAP' '/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB' '1500 ')mbox: root=/var/dovecot-test/data/someuser, index=/var/dovecot-test/data/someuser, inbox=/var/dovecot -teste-mailspool/someuser auth(default): client in: AUTH 1 PLAIN service=IMAP lip=dovecot_machine_ip rip=client_ip resp=dGhhaXNjZ2IAdGhhaXNjZ2IAdHJvY2FyMTIz auth(default): ldap(someuser,client_ip): bind search: base=dc=mydomain,dc=me filter=(&(object class=inetlocalmailrecipient)(uid=someuser)) auth(default): ldap(someuser,client_ip): result: mail(user)=someuser auth(default): ldap(someuser,client_ip): bind: dn=cn=112345,ou=people,dc=mydomain,dc=me auth(default): client out: OK 1 user=someuser auth(default): master in: REQUEST 10 16172 1 auth(default): ldap(someuser,client_ip): user search: base=dc=mydomain,dc=me scope=subtree fi lter=(&(objectclass=inetlocalmailrecipient)(mail=someuser)) fields=uid, uid auth(default): master out: USER 10 someuser user=someuser uid=1500 gid=12 imap-login: Login: user=<someuser>, method=PLAIN, rip=client_ip, lip=dovecot_machine_ip debug ('someuser' 'someuser' '' 'IMAP' '/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB' '1500 ')Effective uid=1500, gid=12 debug ('someuser' 'someuser' '' 'IMAP' '/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB' '1500 ')Namespace: type=private, prefix=, sep=/, inbox=yes, hidden=no, subscriptions=no debug ('someuser' 'someuser' '' 'IMAP' '/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB' '1500 ')mbox: data=/var/dovecot-test/data/someuser:INBOX=/var/dovecot-test/someuser debug ('someuser' 'someuser' '' 'IMAP' '/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB' '1500 ')mbox: root=/var/dovecot-test/data/someuser, index=/var/dovecot-test/data/someuser, inbox=/var/dovecot -teste-mailspool/someuser debug ('someuser' 'someuser' '' 'IMAP' '/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB' '1500 ')Disconnected: Logged out debug ('someuser' 'someuser' '' 'IMAP' '/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB' '1500 ')Disconnected: Logged out auth(default): client in: AUTH 1 PLAIN service=IMAP lip=dovecot_machine_ip rip=client_ip auth(default): client out: CONT 1 auth(default): client in: CONT 1 AHRoYWlzY2diAHRyb2NhcjEyMw== auth(default): ldap(someuser,client_ip): bind search: base=dc=mydomain,dc=me filter=(&(object class=inetlocalmailrecipient)(uid=someuser)) auth(default): ldap(someuser,client_ip): result: mail(user)=someuser auth(default): ldap(someuser,client_ip): bind: dn=cn=112345,ou=people,dc=mydomain,dc=me auth(default): client out: OK 1 user=someuser auth(default): master in: REQUEST 11 7014 1 --- error msg --- --- --- --- -- dovecot.conf --- --- --- --- login_user = dovecot mail_extra_groups = mail valid_chroot_dirs = /var/dovecot-test mail_location = mbox:/var/dovecot-test/data/%u:INBOX=/var/dovecot-test/%u login_process_per_connection = yes login_processes_count = 3 login_greeting = login_greeting_capability = yes namespace private { separator = / prefix = inbox = yes } mail_debug = yes mail_log_prefix = "debug ('%u' '%n' '%d' '%s' '%h' '%i')" auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_~@ auth_verbose = yes auth_debug = yes auth_debug_passwords = yes auth default { mechanisms = plain passdb ldap { args = /etc/dovecot/dovecot-ldap.conf_passdb } userdb ldap { args = /etc/dovecot/dovecot-ldap.conf_userdb } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = dovecot-test group = mail } } } -- dovecot.conf --- --- --- --- -- dovecot-ldap.conf (dovecot-ldap.conf_passdb and dovecot-ldap.conf_userdb are symlinks to this file) hosts = ldap.mydomain.me dn = uid=dovecot,ou=someou,dc=mydomain,dc=me dnpass = pass tls = no auth_bind = yes ldap_version = 3 base = dc=mydomain,dc=me scope = subtree deref = never user_global_uid = dovecot-test user_global_gid = mail # user_filter = (&(objectclass=inetlocalmailrecipient)(mail=%u)) # user_attrs = uid=user, uid=home pass_filter = (&(objectclass=inetlocalmailrecipient)(uid=%u)) pass_attrs = mail=user,userPassword=password -- --- --- --- --- thanks = A 2 Z Ozone Generators Top-quality industrial, commercial, and agricultural ozone generator. http://a8-asy.a8ww.net/a8-ads/adftrclick?redirectid=bf5730137c0a5c2b7dd75c6… -- Powered by Outblaze

2 1