- dovecot - dovecot.org

Major upgrade of mail server
by Shawn Heisey 18 Jul '21

18 Jul '21

I have a mail server in AWS that is currently running Ubuntu 18. Every time I log in, I am reminded that I can upgrade to Ubuntu 20. On Ubuntu 18, the dovecot version is 3.3.0-1ubuntu0.3. On Ubuntu 20, it is 2.3.7.2-1ubuntu3. Many other packages, probably including the mysql server, would also be upgraded. Dovecot and Postfix use a postfixadmin database in mysql for users, and postfix is using dovecot-lda to deliver mail. I am using managesieve from dovecot on roundcube webmail. As far as I know, my own user is the only one with sieve scripts actually in use ... and I have a LOT of filters/folders for various mailing lists. I've been a little bit terrified of doing an upgrade, because I do have a couple of people using my mail server for real work email and I don't want to disrupt them. I'm writing today to find out what are the likely pain points I might encounter when doing this kind of major upgrade, and if there is any helpful information that can help me get through those problems. I'm hoping that it will go smoothly and everything just works. Here's the doveconf -n output: https://apaste.info/FUgF If I have been silly enough to include sensitive data from the config, I would appreciate a heads up so I know what passwords to change. I did a quick glance and didn't see anything. Thanks, Shawn

5 5

Dovecot book for a newbie
by techlists＠phpcoderusa.com 16 Jul '21

16 Jul '21

Hi, Please recommend a Dovecot book for a newbie... I have a fair amount of Linux PHP hosting experience - LAMP virtual host configurations. I'm new to BIND, Postfix, and Dovecot. I'm running Ubuntu 20.04lts. I have a test server almost working. Can send but not receive. Would like to understand more. I'm guessing it is a Zone (MX) / SSL / Client configuration issue. Thanks in advance!!

5 8

OT somewhat, how to unsubscribe?
by Christy S 16 Jul '21

16 Jul '21

Hi folks, It's been a while since I've subscribed and I don't remember how to get off the mailing list. We've changed how we're handling mail now, so dovecot is no longer being used. Can anyone help? MOst mailing lists have a blurb at the bottom with instructions but this one doesn't seem to. Thanks Christy

3 2

Dovecot geographically distributed
by Claudio Corvino 16 Jul '21

16 Jul '21

Hi, I have a single Dovecot (2.3.4.1) IMAP/LMTP server on HQ "A" and I would like to create a backup server distributed to HQ "B", two HQ are connected through an IPsec tunnel. User mailboxes (type mbox) are on NFS storage. I don't need HA, it could even be an active / passive configuration with a floating IP, but I don't know how to keep in sync the two remote NFS filesystems. I don't know if Dovecot replication is suitable for me. Thanks -- *Claudio Corvino IT Systems Administrator*

1 0

2FA/MFA with IMAP & postfix/submission
by Alex 16 Jul '21

16 Jul '21

Hi, I have a dovecot-2.3.13 system on fedora34 with a few hundred IMAP4 accounts, as well as postfix users using submission. Clients are using primarily Outlook on Windows and old squirrelmail. Are there multi-factor options available? If it is not available, do you have any recommendations on where I should look to do this? All of the links related to this topic appear to be very old, or limited to Linux PAM users.

12 19

function for whitelisting IPs
by White, Daniel E. (GSFC-770.0)[NICS] 16 Jul '21

16 Jul '21

Sebastian, Do you have any examples of such a function and how/where it is used ? -----Original Message----- From: dovecot <dovecot-bounces(a)dovecot.org> on behalf of Sebastian <sebastian(a)sebbe.eu> Reply-To: Dovecot Mailing List <dovecot(a)dovecot.org> Date: Thursday, July 15, 2021 at 01:19 To: 'Mailing List' <dovecot(a)dovecot.org> Subject: [EXTERNAL] Sv: 2FA/MFA with IMAP & postfix/submission Main problem is that not many clients do natively support multifactor. Some clients, do popup a login dialog if the server rejects the password as invalid, which can be used to create a "cheaty variant" of multifactor, but some clients just popup an error dialog and tell the user to just correct password in settings. Some clients even go as long as requiring the user to delete the account with wrong password and set up a new connection. So no, it cannot be relied upon. I have a better idea: Have a function for whitelisting IPs, possible /24's or similiar, where a login to roundcube or other webmail client (with 2FA) will add the IP onto a whitelist for that account. Or perhaps, just "set" the country of the account based on GeoIP. When an account tries to login via IMAP or SMTP, you just check if IP and/or GeoIP country is right, and reject the login as invalid if so not. The only thing a client needs to do to get his IMAP or SMTP client to work again if it stops working, is to login once via the web client. -----Ursprungligt meddelande----- Från: dovecot-bounces(a)dovecot.org <dovecot-bounces(a)dovecot.org> För Alex Skickat: den 15 juli 2021 02:10 Till: dovecot(a)dovecot.org Ämne: 2FA/MFA with IMAP & postfix/submission Hi, I have a dovecot-2.3.13 system on fedora34 with a few hundred IMAP4 accounts, as well as postfix users using submission. Clients are using primarily Outlook on Windows and old squirrelmail. Are there multi-factor options available? If it is not available, do you have any recommendations on where I should look to do this? All of the links related to this topic appear to be very old, or limited to Linux PAM users.

7 10

TLS Security
by Stefan Schumacher 15 Jul '21

15 Jul '21

Hi, I wish to build a new secure email server. It seems I am on the right way – at least I get no more error messages for Postfix – but Dovecot is still making trouble. I am using Dovecot 1:2.3.4.1-5+deb10u6 and I am using ISPconfig 3.25 to do the rough configuring and nano and whats left of my brain to do the finer details. Lets start with what I added to conf.d/10-ssl.conf ssl_cert = </etc/letsencrypt/live/servername/fullchain.pem ssl_key = </etc/letsencrypt/live/servername/privkey.pem ssl_cipher_list = EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA384:EECDH+ECDSA+SHA256:EECDH+aRSA+SHA384:EECDH+aR$ ssl_protocols = !SSLv2 !SSLv3 !TLSv1 !TLSv1.1 ssl_min_protocol = TLSv1.2 As you can see, I clearly do not want to use TLS before v1.2. I think this is not unreasonable in the year 2021. Now, after the changes I ran Kali (I use it to verify the results of my experiments) and - this is a mailing list, so no screenshots: It says: SSL/TLS Deprecated TLS v1.0 and TLS v1.1 Detection. I get this for the ports 143, 110, 993 and 995. I thought I had done everything one could to disable old TLS-Versions. What am I doing wrong? Yours sincerely Stefan Schumacher

4 6

AW: TLS Security
by Stefan Schumacher 15 Jul '21

15 Jul '21

Hi Justina, Kali tools is of course extremly unprecise. Excuse me, I had a long stressful day and wanted to get this out before the end of the Day. Kali is a rolling release and I keep it up to date by upgrading every few days. I also update the feeds. What I actually use for security scans is the former OpenVAS, which now has been relegated to being a part of the Community Edition of the Greenbone suite. You have seen the values I have in Dovecot. What follows now are my settings in the postfix main.cf. As you can clearly see it, it should prevent connections from TLS below 1.2. Dovecot is of course not very fresh because it's Debian 10 and Debian 11 is just around the corner (a few days). These are the settings of my postfix main.cf. I am very tempted to grab an Image of Debian 11 and install ISPConfig and my Dovecot and Postfix settings there. I am of course open to any other suggestions. A the moment I consider to install a new Bullseye RC2 and then put my configuration on it. I am of course open for any other suggestions. Yours sincerely Stefan smtpd_use_tls = yes smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_eecdh_grade = strong smtpd_tls_protocols= !SSLv2, !SSLv3, !TLSv1, !TLSv1.1 smtpd_tls_mandatory_protocols= !SSLv2, !SSLv3, !TLSv1, !TLSv1.1 smtpd_tls_mandatory_ciphers = high smtpd_tls_security_level=may smtpd_tls_ciphers = high tls_preempt_cipherlist = yes smtpd_tls_mandatory_exclude_ciphers = aNULL, MD5 , DES, ADH, RC4, PSD, SRP, 3DES, eNULL smtpd_tls_exclude_ciphers = aNULL, MD5 , DES, ADH, RC4, PSD, SRP, 3DES, eNULL smtp_tls_mandatory_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1 smtp_tls_protocols = !SSLv2, !SSLv3, !TLSv1, !TLSv1.1 ________________________________ Von: justina colmena ~biz <justina(a)colmena.biz> Gesendet: Mittwoch, 14. Juli 2021 18:50 An: dovecot(a)dovecot.org <dovecot(a)dovecot.org>; Stefan Schumacher <s.schumacher(a)consulting1x1.com> Betreff: Re: TLS Security Interesting. Assuming your "Kali" tools are in fact up to date to test with newer protocols TLS1.2+, is Dovecot compiled against a recent version of the OpenSSL or GnuTLS library or whatever it uses to support the newer TLS protocols? Definitely an outdated cipher issue, on Postfix as well as Dovecot.... On July 14, 2021 6:55:19 AM AKDT, Stefan Schumacher <s.schumacher(a)consulting1x1.com> wrote: Hi, I wish to build a new secure email server. It seems I am on the right way – at least I get no more error messages for Postfix – but Dovecot is still making trouble. I am using Dovecot 1:2.3.4.1-5+deb10u6 and I am using ISPconfig 3.25 to do the rough configuring and nano and whats left of my brain to do the finer details. Lets start with what I added to conf.d/10-ssl.conf ssl_cert = </etc/letsencrypt/live/servername/fullchain.pem ssl_key = </etc/letsencrypt/live/servername/privkey.pem ssl_cipher_list = EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA384:EECDH+ECDSA+SHA256:EECDH+aRSA+SHA384:EECDH+aR$ ssl_protocols = !SSLv2 !SSLv3 !TLSv1 !TLSv1.1 ssl_min_protocol = TLSv1.2 As you can see, I clearly do not want to use TLS before v1.2. I think this is not unreasonable in the year 2021. Now, after the changes I ran Kali (I use it to verify the results of my experiments) and - this is a mailing list, so no screenshots: It says: SSL/TLS Deprecated TLS v1.0 and TLS v1.1 Detection. I get this for the ports 143, 110, 993 and 995. I thought I had done everything one could to disable old TLS-Versions. What am I doing wrong? Yours sincerely Stefan Schumacher -- Sent from my Android device with K-9 Mail. Please excuse my brevity.

1 0

Verifying replication
by Arnold Hendriks 15 Jul '21

15 Jul '21

Dear Dovecot people, I've set up Dovecot replication a couple of years ago. I'm watching the general server health and having Nagios check doveadm replicator status regularly. I'm seeing accounts replicating, disk space usage obviously shows that things work in principle, however, I still wonder whether the replication actually works properly. Accounts I check work, but 1-5% of the messages could easily be missing without me noticing it. These servers have I think about 50K accounts (a lot of them dormant) and between 1 to 2TB of mail. I'm trying to get some more confidence as to whether replication is actually working properly and whether I'm not missing anything that will burn me if I ever have to 'fallback'. Has anyone ever done some verification outside of simply watching doveadm replication stats, to see if they are missing anything ? Eg, I could imagine a process that generates a list of accounts, and then generates hashes on both sides of the replication for each mailbox folder. If the hashes match, the folder gets removed from the list, and once all folders are removed, the account gets removed. Iterating the account list should finally reduce it to 0, or a few extremely high traffic accounts which can be checked manually or be ignored. But I'm trying to avoid reinventing the wheel. Has anyone done anything like this, or can suggest a different approach? With regards, Arnold Hendriks

1 1

Forcing replication - difference is a 0x0D 0x0D 0xA sequence?
by Arnold Hendriks 15 Jul '21

15 Jul '21

I've found a few mailboxes on my system that were being replicated where the mailboxes are not in sync. On server 1 I see: dovecot1:/# doveadm fetch -u s0000000 "size.physical size.virtual" mailbox-guid c92f64f79f0d1ed01e6d5b314f04886c uid 115 size.physical: 1815 size.virtual: 1843 On server 2 I see: dovecot2:/# doveadm fetch -u s0000000 "size.physical size.virtual" mailbox-guid c92f64f79f0d1ed01e6d5b314f04886c uid 115 size.physical: 1805 size.virtual: 1833 Running ' doveadm replicator replicate -f s0000000 "*" ' does not fix the issue. I've compared the mails and the difference appears to be that the primary server (where the mail comes in) has a few occurences of "0D 0D 0A" (hex) which on the replicated server looks like "0D 0A". (ie, \r\r\n was replicated as \r\n ?) Is there a way to force these two messages to be in sync again ? Is the \r\r\n being replicated as \r\n a known issue ? (I'm not sure if I could replicate this, this message dates back to 2007 so probably wasn't even received originally on this server. Replication was configured much later than 2007)

1 0