- dovecot - dovecot.org

[Dovecot] Restricting IP and/or user access (POP3/IMAP)
by Jos Chrispijn 24 Aug '06

24 Aug '06

2 1

[Dovecot] (no subject)
by Joseph D. Wagner 24 Aug '06

24 Aug '06

Ok, I tried: sh -x /etc/rc.d/init.d/dovecot start and it started ok. Then I tried: sh /etc/rc.d/init.d/dovecot start and it started ok too. However, simply using: /etc/rc.d/init.d/dovecot start won't start. On a hunch, I disabled SELinux, and then: /etc/rc.d/init.d/dovecot start started ok. So I have an SELinux problem. Right now I'm doing a filesystem relabel. If that doesn't work, does anyone know where to go from here? Joseph D. Wagner

2 1

[Dovecot] sieve-cvs build failing @ 'make'
by Richard 24 Aug '06

24 Aug '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: RIPEMD160 hi, i've dovecot-cvs up on osx. logging in with virtual users is working. so far so good. i'm attempting to build sieve support now. after: % cd /usr/ports/dovecot/dovecot-sieve % glibtoolize -f -c % autoreconf -i -f configure.in: installing `./install-sh' configure.in: installing `./missing' src/Makefile.am: installing `./depcomp' configure.in: installing `./ylwrap' Makefile.am: installing `./INSTALL' Makefile.am: installing `./COPYING' a: % ./configure \ --prefix=/usr/local/dovecot \ ... --disable-static --enable-shared \ --with-dovecot=/usr/ports/dovecot/dovecot-cvs % make fails @: ... gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/ports/dovecot/dovecot-cvs - -I/usr/ports/dovecot/dovecot-cvs/src/lib - -I/usr/ports/dovecot/dovecot-cvs/src/lib-dict - -I/usr/ports/dovecot/dovecot-cvs/src/lib-mail - -I/usr/ports/dovecot/dovecot-cvs/src/lib-storage - -I/usr/ports/dovecot/dovecot-cvs/src/deliver - -I/usr/local/berkeley-db/include -I/usr/local/cyrus-sasl/include - -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations - -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast - -I/usr/local/ssl/include -MT map.lo -MD -MP -MF .deps/map.Tpo -c map.c - -fno-common -DPIC -o .libs/map.o if /bin/sh ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. - -I. -I.. -I/usr/ports/dovecot/dovecot-cvs - -I/usr/ports/dovecot/dovecot-cvs/src/lib - -I/usr/ports/dovecot/dovecot-cvs/src/lib-dict - -I/usr/ports/dovecot/dovecot-cvs/src/lib-mail - -I/usr/ports/dovecot/dovecot-cvs/src/lib-storage - -I/usr/ports/dovecot/dovecot-cvs/src/deliver - -I/usr/local/berkeley-db/include -I/usr/local/cyrus-sasl/include - -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations - -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast - -I/usr/local/ssl/include -MT sieve-cmu.lo -MD -MP -MF ".deps/sieve-cmu.Tpo" -c -o sieve-cmu.lo sieve-cmu.c; \ then mv -f ".deps/sieve-cmu.Tpo" ".deps/sieve-cmu.Plo"; else rm -f ".deps/sieve-cmu.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/ports/dovecot/dovecot-cvs - -I/usr/ports/dovecot/dovecot-cvs/src/lib - -I/usr/ports/dovecot/dovecot-cvs/src/lib-dict - -I/usr/ports/dovecot/dovecot-cvs/src/lib-mail - -I/usr/ports/dovecot/dovecot-cvs/src/lib-storage - -I/usr/ports/dovecot/dovecot-cvs/src/deliver - -I/usr/local/berkeley-db/include -I/usr/local/cyrus-sasl/include - -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations - -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast - -I/usr/local/ssl/include -MT sieve-cmu.lo -MD -MP -MF .deps/sieve-cmu.Tpo -c sieve-cmu.c -fno-common -DPIC -o .libs/sieve-cmu.o sieve-cmu.c: In function 'get_flags': sieve-cmu.c:181: error: 'array_t' undeclared (first use in this function) sieve-cmu.c:181: error: (Each undeclared identifier is reported only once sieve-cmu.c:181: error: for each function it appears in.) sieve-cmu.c:181: error: parse error before 'union' sieve-cmu.c:181: warning: unused variable 'v_modifiable' sieve-cmu.c:181: warning: unused variable 'v' sieve-cmu.c:178: warning: unused parameter 'sieve_flags' sieve-cmu.c:179: warning: unused parameter 'flags_r' sieve-cmu.c:179: warning: unused parameter 'keywords_r' sieve-cmu.c: At top level: sieve-cmu.c:181: warning: type defaults to 'int' in declaration of 'keywords' sieve-cmu.c:181: warning: data definition has no type or storage class sieve-cmu.c:185: warning: type defaults to 'int' in declaration of 'flags_r' sieve-cmu.c:185: warning: data definition has no type or storage class sieve-cmu.c:187: error: parse error before 'void' sieve-cmu.c:187: warning: type defaults to 'int' in declaration of '_array_tmp' sieve-cmu.c:187: warning: initialization makes integer from pointer without a cast sieve-cmu.c:187: warning: data definition has no type or storage class sieve-cmu.c:187: error: parse error before '&' token sieve-cmu.c:193: error: parse error before '&' token sieve-cmu.c:209: warning: type defaults to 'int' in declaration of 'name' sieve-cmu.c:209: error: conflicting types for 'name' sieve-cmu.c:182: error: previous declaration of 'name' was here sieve-cmu.c:209: warning: initialization makes integer from pointer without a cast sieve-cmu.c:209: warning: data definition has no type or storage class sieve-cmu.c:210: error: parse error before 'void' sieve-cmu.c:210: error: parse error before '&' token sieve-cmu.c:212: warning: type defaults to 'int' in declaration of 'keywords_r' sieve-cmu.c:212: error: request for member 'arr' in something not a structure or union sieve-cmu.c:213: error: request for member 'v' in something not a structure or union sieve-cmu.c:213: error: request for member 'arr' in something not a structure or union sieve-cmu.c:213: warning: type defaults to 'int' in declaration of 'type name' sieve-cmu.c:213: warning: cast from function call of type 'const void *' to non-matching type 'int' sieve-cmu.c:213: warning: pointer/integer type mismatch in conditional expression sieve-cmu.c:213: error: initializer element is not constant sieve-cmu.c:213: warning: data definition has no type or storage class sieve-cmu.c:214: error: parse error before '}' token make[3]: *** [sieve-cmu.lo] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 - -- /"\ \ / ASCII Ribbon Campaign X against HTML email, vCards / \ & micro$oft attachments [GPG] OpenMacNews at gmail dot com fingerprint: 50C9 1C46 2F8F DE42 2EDB D460 95F7 DDBD 3671 08C6 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (Darwin) iEYEAREDAAYFAkTpGRwACgkQlffdvTZxCMaAaQCeJVgg9SIx2iezvPwtHGZVghQE h4wAniYsJU//3a010k0bO0p9me8RHIGz =6Dh0 -----END PGP SIGNATURE-----

4 4

[Dovecot] Problems with dovecot 1.0rc5 + MySQL 5.0.24
by Daniel Torreblanca 24 Aug '06

24 Aug '06

Hi all, I'm having an intermittent problem logging users in through a webmail client (RoundCube). My maillog reports this: auth(default): vmysql: sql error[3]: MySQL server has gone away imap-login: Disconnected: user=<sales(a)coppersinkdepot.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured The MySQL server hasn't gone anywhere, I can log into it fine and other apps report no problems with it. Restarting Dovecot fixes this issue, but it'll just happen again later. I'm on OpenBSD 3.9 using vpopmail. I've looked through the mailing list archives but can't find any info on this specific problem. Any ideas?

3 3

Re: [Dovecot] 0.99.14-1.1.el3 vs 1.0-0_20.rc7.el3
by Esquivel, Vicente 24 Aug '06

24 Aug '06

I am sorry maybe I confused all of you, but I am not running them side by side. What I did was install one rpm and uninstall it then install 1.0 and then uninstall it. Testing the individually when installed. Vicente ________________________________ From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] On Behalf Of Jeff Graves Sent: Wednesday, August 23, 2006 4:54 PM To: dovecot(a)dovecot.org Subject: Re: [Dovecot] 0.99.14-1.1.el3 vs 1.0-0_20.rc7.el3 The config files are different of 0.99 and 1.0 (and I'm not sure you can run them side by side). Delete the config for 0.99 and install just 1.0rc7 and modify it's config. You may also need to delete the index files and recreate the subscriptions file as I don't think they're compatible. -- Jeff Graves, MCSA Image Source, Inc. 508.966.5200 x31 www.image-src.com -----Original Message----- From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] On Behalf Of Esquivel, Vicente Sent: Wednesday, August 23, 2006 4:27 PM To: Dovecot Mailing List Subject: Re: [Dovecot] 0.99.14-1.1.el3 vs 1.0-0_20.rc7.el3 Anyone else see something similar to this? Vicente ________________________________ From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] On Behalf Of Esquivel, Vicente Sent: Wednesday, August 23, 2006 8:39 AM To: Dovecot Mailing List Subject: [Dovecot] 0.99.14-1.1.el3 vs 1.0-0_20.rc7.el3 Hello all, I am new to the list so bear with me. I am testing dovecot out on a test server running RHEL ES 3, I have installed 0.99.14-1.1.el3 and 1.0-0_20.rc7.el3. This server is using the mbox mailbox format, running sendmail, procmail, and using PAM to do authentication to an LDAP server. I get varying results between the two version. 0.99.14-1.1.el3 : Upon installing this I leave the defaults and login just fine, I can view mail just fine via outlook express and thunderbird. 1.0-0_20.rc7.el3: Upon installing this I leave the defaults and login just fine but I cannot view my email via outlook express or thunderbird. The logs indicate that it reads my inbox with no errors but I still cannot see anything. Can anyone please help me with this. Thanks Vicente

1 0

Re: [Dovecot] 0.99.14-1.1.el3 vs 1.0-0_20.rc7.el3
by Esquivel, Vicente 24 Aug '06

24 Aug '06

Anyone else see something similar to this? Vicente ________________________________ From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] On Behalf Of Esquivel, Vicente Sent: Wednesday, August 23, 2006 8:39 AM To: Dovecot Mailing List Subject: [Dovecot] 0.99.14-1.1.el3 vs 1.0-0_20.rc7.el3 Hello all, I am new to the list so bear with me. I am testing dovecot out on a test server running RHEL ES 3, I have installed 0.99.14-1.1.el3 and 1.0-0_20.rc7.el3. This server is using the mbox mailbox format, running sendmail, procmail, and using PAM to do authentication to an LDAP server. I get varying results between the two version. 0.99.14-1.1.el3 : Upon installing this I leave the defaults and login just fine, I can view mail just fine via outlook express and thunderbird. 1.0-0_20.rc7.el3: Upon installing this I leave the defaults and login just fine but I cannot view my email via outlook express or thunderbird. The logs indicate that it reads my inbox with no errors but I still cannot see anything. Can anyone please help me with this. Thanks Vicente

2 1

[Dovecot] Rename folder bug dovecot-1.0RC6 ?
by Ian Thurlbeck 23 Aug '06

23 Aug '06

Dear All can someone confirm this bug please ? I am using Thunderbird 1.07, TB 1.5.0.4, Horde/IMP webmail as test clients, all running on FC4. Server is 1.0RC6 on CentOS 4 with maildir-sep set to ';' To reproduce: In your favourite mail client: 1. Create a top-level mail folder "atest" 2. Rename "atest" to "atest-extra" (basically hyphen<anything>) Result: Error about mailbox "atest-extra" does not exist If you refresh the folder list you see a new folder called "atest-extra-extra" (read all about it). Anyone else see this or is just me ? Many thanks Ian -- Ian Thurlbeck http://www.stams.strath.ac.uk/ Statistics and Modelling Science, University of Strathclyde Livingstone Tower, 26 Richmond Street, Glasgow, UK, G1 1XH Tel: +44 (0)141 548 3667 Fax: +44 (0)141 552 2079

3 2

[Dovecot] virtual user directories?
by Mike 23 Aug '06

23 Aug '06

I'm installing dovecot and hope to migrate my users from a POP3 system soon. I have the users in LDAP and LDAP is working, dovecot is using LDAP to authenticate my tests. What I'm trying to find is a setting when a user is authenticated by LDAP and dovecot, and that user directory does not exist in the location I have given for the private name space, I want dovecot to create the directory. Mentioning in a log that it created a directory is ok, but I want it to create the directory. I do not want to have to create the directories by hand (easy to do, I know, but that's not the point). Is there a way to tell dovecot to create any missing directories for authenticated users? Mike

1 0

[Dovecot] bug? order dependencies in branch_1_0 conf file
by Richard 23 Aug '06

23 Aug '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: RIPEMD160 bldg dovecot cvs branch_1_0 on osx, i'm seeing a sensitivity to order in protocol statements. e.g., on launch: THIS WORKS FINE: protocol lda { sendmail_path = /usr/local/exim/bin/exim ... plugin { quota = maildir:storage=10240 # 10 MB quota limit } } but, THIS DOES NOT protocol lda { ... plugin { quota = maildir:storage=10240 # 10 MB quota limit 65: } 66: sendmail_path = /usr/local/exim/bin/exim 67: } reporting: /dovecot.conf line 66: Unknown setting: is this, in fact, a bug? feature? thanks, richard - -- /"\ \ / ASCII Ribbon Campaign X against HTML email, vCards / \ & micro$oft attachments [GPG] OpenMacNews at gmail dot com fingerprint: 50C9 1C46 2F8F DE42 2EDB D460 95F7 DDBD 3671 08C6 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (Darwin) iEYEAREDAAYFAkTsnD0ACgkQlffdvTZxCMbu1QCfbyq1bddAz8H5RdDJJYx8iTMw SNkAoIaK6xwJ05zM2aJ0/XJH+UucdPoV =9ajq -----END PGP SIGNATURE-----

1 0

[Dovecot] Maildir folder separator
by Mikko Kortelainen 23 Aug '06

23 Aug '06

Hi, There's been some demand from users to make it possible to use the period character (.) in folder names, but that is impossible when the folder separator is already period. Is there any possibility of replacing that which another separator, say a / ? -Mikko

14 16