- dovecot - dovecot.org

[Dovecot] Is it possible to regenerate the index files?
by Joakim Verona 15 Mar '05

15 Mar '05

Is it possible to regenerate the index files, on other conditions than the mbox file being read? For instance, it would be nice if I could regenerate the index for a specific mbox whenever procmail delivers mail to it. If theres no existing solution, would it be possible to make a small script with something like "nc" that could send an imap command to dovecot, so that dovecot would rebuild its index for that mbox? If so, which imap command triggers an index rebuild? -- Joakim Verona www.verona.se

2 5

[Dovecot] Visibility of .subscriptions and .customflags
by justin 15 Mar '05

15 Mar '05

Hi, I upgraded to test65 from 0.99 (mostly to get the namespace feature) and now it seems my .subscriptions and .customflags are showing up as mail folders in my IMAP client (Eudora). If I try and open those folders, of course I get an error. How can I configure dovecot so that these aren't displayed to my IMAP client? I looked through about 6 months of acrhives and couldn't find it mentioned anywhere. Thanks.

2 1

[Dovecot] logging
by F. Even 15 Mar '05

15 Mar '05

I'm curious about exactly what this means in my log: Mar 13 10:56:20 cerebus dovecot: imap-login: Disconnected [130.94.242.20] Mar 13 10:56:51 cerebus last message repeated 177 times Mar 13 10:57:32 cerebus last message repeated 179 times Now...does Dovecot ONLY log the names of users on successful attempts? Is this "Disconnected" log entry an indication someone ran a username/password attack against the imap server and failed to authenticate? If so, is there any way to make this a little more verbose, so I can perhaps see what names, etc. the annoying idiot is throwing against my server....? Thanks.

2 1

[Dovecot] (no subject)
by Gabriel Granger 15 Mar '05

15 Mar '05

Hi All, Bit the bullet last night and switched off UW-IMAP and turned on Dovecot. With any migration I've got some teething problems and hoping someone might be able to point me in the right direction. I tested the system using apple's Mail.app which worked fine, no problems at all, but it seems that most of my users are getting problems, i suspect Mail.app is hiding these messages from me. All my users are using ThunderBird 1.0 lastest stable release. Some messages in their IMAP folders are producing the following error. The current command did not succeed. The mail server responded: Error in IMAP command UID: Invalid BODY[_] parameter: Missing '>' in '<16384.-14781>'. it occurs on the same messages in the users email client but happens randomly, it does not stop you from viewing the message, its just pops up with this error. I'm current using IMAP over SSL and using mbox not maildir for IMAP Any ideas or hep would be great as I'd rather not have to roll back out to UW-IMAP Gabe

6 16

Re: [Dovecot] aha! (was apple mail vs. v0.99)
by sean finney 15 Mar '05

15 Mar '05

hey timo, On Tue, Mar 15, 2005 at 07:32:35PM +0200, dovecot-request(a)dovecot.org wrote: > From: Timo Sirainen <tss(a)iki.fi> > > i set: > > > > mailbox_check_interval = 0 > > This has been the default since 0.99.5 which was released over 2 years > ago. How old version are you using? :) Or had you changed the default? i had indeed changed the default, thinking that it would be a nice feature to turn on. when the problem first surfaced, i immediately thought of this option. however, since the problem was that applemail wasn't seing the new mail, and this was an option to notify the client that there *was* new mail, i guess common sense got the better of me and i forgot this was something i had changed... > > mailbox_idle_check_interval = 0 > > This shouldn't matter because OSX Mail doesn't use IDLE. Probably better > idea to turn it back on or clients using IDLE don't see new mails (I > think?) aha. well then i'll have to try turning that back on :) thanks, sean

1 0

[Dovecot] corrupted inboxes
by Josh Burley 15 Mar '05

15 Mar '05

Hi all, Two users on our system have recently had trouble reading their inbox, and it seems to be a result of their inbox getting corrupted. In the most recent case, their Mailbox file (in /home/eric/Mailbox in this case), has the following as the first line: cnw.igmg-- Here's a piece of the logs below... if you look for "eric", there's a successfully delivery, followed a bit later by a POP attempt by "eric" that returns that the Mailbox isn't in mbox format. Any ideas? .josh Mar 11 14:59:04 core postfix/local[8203]: 27D18279857E: to=<eric(a)kuci.org>, relay=local, delay=0, status=sent (delivered to mailbox) Mar 11 14:59:04 core postfix/qmgr[7238]: 27D18279857E: removed Mar 11 14:59:06 core postfix/smtpd[8199]: disconnect from user-0c8gg6h.cable.mindspring.com[24.136.64.209] Mar 11 14:59:13 core pop3-login: Login: gtt [::ffff:67.120.76.169] Mar 11 14:59:18 core postfix/smtpd[7575]: connect from webhost2.ethr.net[208.37.25.24] Mar 11 14:59:18 core postfix/smtpd[7575]: setting up TLS connection from webhost2.ethr.net[208.37.25.24] Mar 11 14:59:18 core postfix/smtpd[7575]: TLS connection established from webhost2.ethr.net[208.37.25.24]: TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits) Mar 11 14:59:18 core postfix/smtpd[7575]: 242E2279857E: client=webhost2.ethr.net[208.37.25.24] Mar 11 14:59:18 core postfix/cleanup[8201]: 242E2279857E: message-id=<bb165712392a2b4375d6da0efa3c046c(a)www.ethr.net> Mar 11 14:59:18 core postfix/qmgr[7238]: 242E2279857E: from=<nobody(a)webhost2.ethr.net>, size=1527, nrcpt=1 (queue active) Mar 11 14:59:18 core postfix/cleanup[8201]: 6F63A2798580: message-id=<bb165712392a2b4375d6da0efa3c046c(a)www.ethr.net> Mar 11 14:59:18 core postfix/local[8203]: 242E2279857E: to=<r-ethr(a)kuci.org>, relay=local, delay=0, status=sent (forwarded as 6F63A2798580) Mar 11 14:59:18 core postfix/qmgr[7238]: 6F63A2798580: from=<nobody(a)webhost2.ethr.net>, size=1653, nrcpt=1 (queue active) Mar 11 14:59:18 core postfix/smtpd[7575]: disconnect from webhost2.ethr.net[208.37.25.24] Mar 11 14:59:18 core postfix/qmgr[7238]: 242E2279857E: removed Mar 11 14:59:18 core postfix/smtp[8250]: setting up TLS connection to blade.butterzone.net Mar 11 14:59:18 core postfix/smtp[8250]: verify error:num=19:self signed certificate in certificate chain Mar 11 14:59:18 core postfix/smtp[8250]: Peer verification: CommonName in certificate does not match: tloin.butterzone.net != blade.butterzone.net Mar 11 14:59:18 core postfix/smtp[8250]: Peer certficate could not be verified Mar 11 14:59:18 core postfix/smtp[8250]: 6F63A2798580: to=<r(a)butterzone.net>, orig_to=<r-ethr(a)kuci.org>, relay=blade.butterzone.net[208.37.27.136], delay=0, status=sent (250 Ok: queued as 4783AC2C130) Mar 11 14:59:18 core postfix/qmgr[7238]: 6F63A2798580: removed Mar 11 14:59:23 core pop3(eric): File isn't in mbox format: /home/eric/Mailbox Mar 11 14:59:24 core pop3-login: Login: eric [::ffff:128.195.131.49] Mar 11 14:59:24 core pop3(eric): File isn't in mbox format: /home/eric/Mailbox Mar 11 14:59:24 core pop3(eric): File isn't in mbox format: /home/eric/Mailbox Mar 11 14:59:24 core pop3(eric): Couldn't open INBOX: Internal error occured. Refer to server log for more information. [2005-03-11 14:59:24] Mar 11 14:59:49 core pop3-login: Login: eric [::ffff:128.195.131.49] Mar 11 14:59:49 core pop3(eric): File isn't in mbox format: /home/eric/Mailbox Mar 11 14:59:49 core pop3(eric): File isn't in mbox format: /home/eric/Mailbox Mar 11 14:59:49 core pop3(eric): Couldn't open INBOX: Internal error occured. Refer to server log for more information. [2005-03-11 14:59:49] Mar 11 14:59:53 core imap-login: Login: jeanie [::ffff:128.195.131.2] Mar 11 14:59:58 core last message repeated 5 times

2 4

Re: [Dovecot] aha! (was apple mail vs. v0.99)
by sean finney 15 Mar '05

15 Mar '05

hello! On Mon, Mar 14, 2005 at 11:08:39PM +0200, dovecot-request(a)dovecot.org wrote: > From: "Dominik 'Rathann' Mierzejewski" <D.Mierzejewski(a)icm.edu.pl> > > According to RFC3501 (is this the right one?), NOOP can be used to check > for new mail, but it doesn't say that the server should return status > data every time NOOP is issued. i think the problem is that when the server asynchronously reports to the client that there's new mail apple mail gets confused. then noop doesn't report new mail. also, it seems that this is also the cause of apple mail having to re-download the entire mailbox every time it checks for new mail. > From: Timo Sirainen <tss(a)iki.fi> > > How did you disable them? I think enabling oe6-fetch-no-newmail > workaround should help. i set: mailbox_check_interval = 0 mailbox_idle_check_interval = 0 which did the trick (i already had all the client workarounds enabled). thanks, sean

3 2

[Dovecot] empty namespace prefix doesn't honor hidden (PATCH)
by Geo Carncross 15 Mar '05

15 Mar '05

diff -u -r1.44 cmd-list.c --- src/imap/cmd-list.c 5 Feb 2005 18:07:26 -0000 1.44 +++ src/imap/cmd-list.c 15 Mar 2005 16:15:27 -0000 @@ -213,7 +213,7 @@ ctx->inbox && cur_ref == ctx->ref, ns->sep); if (*cur_ref != '\0' || *cur_prefix == '\0') - match = IMAP_MATCH_CHILDREN; + match = ns->hidden ? IMAP_MATCH_NO : IMAP_MATCH_CHILDREN; else { len = strlen(cur_prefix); if (cur_prefix[len-1] == ns->sep) -- Internet Connection High Quality Web Hosting http://www.internetconnection.net/

1 0

[Dovecot] Authentication to Active Directory
by Chris Wakelin 15 Mar '05

15 Mar '05

Has anybody managed to have Dovecot authenticate to Microsoft Active Directory? I've tried to get it to work using LDAP and the following settings dovecot.conf: userdb = ldap /etc/dovecot-ldap.conf passdb = ldap /etc/dovecot-ldap.conf dovecot-ldap.conf: hosts = rdg-home.ad.rdg.ac.uk dn = cn=bind-user,cn=users,dc=rdg-home,dc=ad,dc=rdg,dc=ac,dc=uk dnpass = XXXXX ldap_version = 2 base = dc=rdg-home,dc=ad,dc=rdg,dc=ac,dc=uk user_filter = (sAMAccountName=%u) pass_filter = (sAMAccountName=%u) I've also tried things like "(&(objectClass=sAMACcountName)(cn=%u))" to no avail. It appears to bind properly, but never finds the account, so login fails. I've had Active Directory authentication working with Squid and with Cyrus SASL/IMAP. Best Wishes, Chris --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+-- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

2 1

[Dovecot] Drac and Dovecot, almost there ...
by Jon Shoberg 15 Mar '05

15 Mar '05

I have dracd and dovecot up and running and trying to get the two connected. I'm using the FC3 rpms from callimg yum install. I've downloaded the drac patch from http://dovecot.org/patches/drac.c and compiled it with both gcc -Wall -W -shared -fPIC -DHAVE_CONFIG_H -I$dovecot -I$dovecot/src/lib drac.c -o drac.so -ldrac and gcc -Wall -W -shared -fPIC -DHAVE_CONFIG_H -I$dovecot -I$dovecot/src/lib drac.c -o drac.so I get no warnings or errors on the compiling to drac.so. In the conf file I have imap_use_modules = yes imap_modules = /usr/lib/dovecot/imap However, I don't see the module being called. Is there a way to tell. The dracd database (/etc/mail/dracd.db) is not being updated via testing with the drac utilities. Thoughts? Ideas? Below is output from a strace ... I don't see /usr/lib/dovecot/imap/drac.so being opened ... execve("/usr/sbin/dovecot", ["/usr/sbin/dovecot"], [/* 20 vars */]) = 0 uname({sys="Linux", node="masra.org", ...}) = 0 brk(0) = 0x8c85000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=28209, ...}) = 0 old_mmap(NULL, 28209, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf6ff9000 close(3) = 0 open("/lib/libssl.so.4", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\226"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=213600, ...}) = 0 old_mmap(0x7c0000, 212692, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7c0000 old_mmap(0x7f1000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x31000) = 0x7f1000 close(3) = 0 open("/lib/libcrypto.so.4", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0\31d\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=933408, ...}) = 0 old_mmap(0x617000, 949656, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x617000 old_mmap(0x6ea000, 73728, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xd2000) = 0x6ea000 old_mmap(0x6fc000, 11672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x6fc000 close(3) = 0 open("/usr/lib/libgssapi_krb5.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\320\214"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=82944, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf6ff8000 old_mmap(0x724000, 80272, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x724000 old_mmap(0x737000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13000) = 0x737000 close(3) = 0 open("/usr/lib/libkrb5.so.3", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`\370[\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=415188, ...}) = 0 old_mmap(0x5b0000, 413000, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x5b0000 old_mmap(0x613000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x63000) = 0x613000 close(3) = 0 open("/lib/libcom_err.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\3548Y\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=7004, ...}) = 0 old_mmap(0x593000, 8636, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x593000 old_mmap(0x595000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x595000 close(3) = 0 open("/usr/lib/libk5crypto.so.3", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`Bp\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=136016, ...}) = 0 old_mmap(0x701000, 134560, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x701000 old_mmap(0x721000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x20000) = 0x721000 close(3) = 0 open("/lib/libresolv.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\360\363"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=81316, ...}) = 0 old_mmap(0x57d000, 80040, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x57d000 mprotect(0x58c000, 18600, PROT_NONE) = 0 old_mmap(0x58d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf000) = 0x58d000 old_mmap(0x58f000, 6312, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x58f000 close(3) = 0 open("/lib/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260\313"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=16908, ...}) = 0 old_mmap(0x4ec000, 12388, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x4ec000 old_mmap(0x4ee000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x4ee000 close(3) = 0 open("/usr/lib/libz.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260\205"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=63528, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf6ff7000 old_mmap(0x517000, 65028, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x517000 old_mmap(0x526000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe000) = 0x526000 close(3) = 0 open("/lib/tls/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 O=\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1524828, ...}) = 0 old_mmap(0x3c0000, 1219740, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x3c0000 mprotect(0x4e3000, 27804, PROT_NONE) = 0 old_mmap(0x4e4000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x123000) = 0x4e4000 old_mmap(0x4e8000, 7324, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x4e8000 close(3) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf6ff6000 mprotect(0x4e4000, 8192, PROT_READ) = 0 mprotect(0x4ee000, 4096, PROT_READ) = 0 mprotect(0x58d000, 4096, PROT_READ) = 0 mprotect(0x3bc000, 4096, PROT_READ) = 0 set_thread_area({entry_number:-1 -> 6, base_addr:0xf6ff66c0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0 munmap(0xf6ff9000, 28209) = 0 time(NULL) = 1110856826 brk(0) = 0x8c85000 brk(0x8cae000) = 0x8cae000 uname({sys="Linux", node="masra.org", ...}) = 0 getpid() = 18177 geteuid32() = 510 open("/etc/dovecot.conf", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=20533, ...}) = 0 pread(3, "## Dovecot 1.0 configuration fil"..., 2048, 0) = 2048 pread(3, "ges, use this logfile instead of"..., 2023, 2048) = 2023 pread(3, "g\n# we check only once in a seco"..., 1970, 4071) = 1970 pread(3, "to give \"mail\" group write acces"..., 2046, 6041) = 2046 pread(3, "STRUCTURE\n# gen"..., 1981, 8087) = 1981 pread(3, "is setting specifies the minimum"..., 2034, 10068) = 2034 pread(3, "dlinks = no\n\n# Check if mails\' c"..., 2026, 12102) = 2026 pread(3, "processes then.\n#mail_drop_priv_"..., 1986, 14128) = 1986 pread(3, " client authenticates in the IMA"..., 2029, 16114) = 2029 pread(3, "ice> | *]: PAM authentication\n# "..., 2034, 18143) = 2034 pread(3, "s, so it may be 0600-root owned "..., 356, 20177) = 356 close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/nsswitch.conf", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1686, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf6fff000 read(3, "#\n# /etc/nsswitch.conf\n#\n# An ex"..., 4096) = 1686 read(3, "", 4096) = 0 close(3) = 0 munmap(0xf6fff000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=28209, ...}) = 0 old_mmap(NULL, 28209, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf6ff9000 close(3) = 0 open("/lib/libnss_files.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\320\32"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=47496, ...}) = 0 old_mmap(NULL, 41604, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xf6feb000 old_mmap(0xf6ff4000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8000) = 0xf6ff4000 close(3) = 0 mprotect(0xf6ff4000, 4096, PROT_READ) = 0 munmap(0xf6ff9000, 28209) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=3306, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf6fff000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 3306 close(3) = 0 munmap(0xf6fff000, 4096) = 0 access("/usr/libexec/dovecot/pop3-login", X_OK) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=3306, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xf6fff000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 3306 close(3) = 0 munmap(0xf6fff000, 4096) = 0 access("/usr/libexec/dovecot/imap-login", X_OK) = 0 access("/usr/libexec/dovecot/imap", X_OK) = 0 access("/usr/lib/dovecot/imap", R_OK|X_OK) = 0 access("/usr/libexec/dovecot/pop3", X_OK) = 0 access("/usr/lib/dovecot/pop3", R_OK|X_OK) = 0 access("/usr/share/ssl/certs/dovecot.pem", R_OK) = -1 EACCES (Permission denied) write(2, "Fatal: ", 7Fatal: ) = 7 write(2, "Can\'t use SSL certificate /usr/s"..., 77Can't use SSL certificate /usr/share/ssl/certs/dovecot.pem: Permission denied) = 77 write(2, "\n", 1 ) = 1 exit_group(89) = ?

2 1