- dovecot - dovecot.org

[Dovecot] RE: dovecot and outlook express and large messages
by Daniel 16 Nov '04

16 Nov '04

Hi Dose dovecot have problem working on a eth0:1 alias type interfaces? I just wondering if this could be my problem? Dovecot would do the authentication correctly and send small email but as soon as any load was put on it like downloading a mail with a large attachment it would fail. All network traffic would stop. No errors in the logs. As soon as I move the service to listen on a non alias interface eth0 all works fine. Very strange. I have taken a good look at our server to check that is not anything. I'm pretty sure we are good. I have also rebooted the box to see if that would fixed it which it didn't. Regards Daniel

3 2

[Dovecot] dovecot with different POP3S / IMAPS Certs
by Vincent Jaussaud 15 Nov '04

15 Nov '04

Hi, I'm new to dovecot, but actually planning to switch a wide WU-IMAP/POP installation to dovecot. With WU-IMAP, a different certificate can be used by pop3s and imaps, allowing both server to be reachable through different hostnames,without SSL complaints on the client side; this is mostly used for scalability. I'm trying to do the same thing with dovecot; that is having dovecot using a different certificate for it's pop3s instance and imaps instance. Unfortunately, in dovecot configuration file, only one certificate can be set; used by both pop3s / imaps. Any idea of the best way to handle this ? Thanks ! Vincent. -- Vincent Jaussaud Kelkoo.com Security Manager email: tatooin(a)kelkoo.com GPG key: 1024D/3BFE3FC7 2002-02-07 "Those who desire to give up freedom in order to gain security will not have, nor do they deserve, either one." -- President Thomas Jefferson. 1743-1826

2 2

[Dovecot] dovecot-auth leaves zombies
by Stefano Maffulli 15 Nov '04

15 Nov '04

Hi all, I have installed and configured dovecot on two different machines, so I don't have much experience with this server. One installation is giving me serious problems, that I have a hard time tracing. From the beginning: the machine is a debian mix (stable/unstable) dovecot 0.9.11, real users authenticated via pam_ldap/nss_ldap. It serves ~70 users, all of them using Outlook, Outlook Express and IMP. The system seems to work just fine for a while, but after a some time, some dovecot-auth zombies start appearing. I can't really understand who/what is causing them. The only thing I see in the logs are these lines, very sporadically, but I still couldn't trace when they happened. Nov 5 09:40:28 csv-mail-01 dovecot-auth: nss_ldap: reconnecting to LDAP server... Nov 5 09:40:28 csv-mail-01 dovecot-auth: nss_ldap: reconnected to LDAP server after 1 attempt(s) (BTW, also apache2 sends similar messages, I don't know if they are related) Nov 5 09:52:14 csv-mail-01 apache2: nss_ldap: reconnecting to LDAP server... Nov 5 09:52:14 csv-mail-01 apache2: nss_ldap: reconnected to LDAP server after 1 attempt(s) After a while dovecot stops authenticating and needs to be killed and restarted (/etc/init.d/dovecot stop takes some time to actually stop dovecot processes). Do you have any clue of what is going on and where I can investigate further? I would like to say 'it's Outlook's fault', but I really can't. Any hint appreciated. regards stef

2 5

RE: [Dovecot] Fatal: chdir(homedir) failed: Permission denied
by Καράμπης Παναγιώτης 15 Nov '04

15 Nov '04

matthias thnx a lot for your hint. We are 2 admins on this box and this makes things complicated. /home 's permissions where 705 and that's the reason for this. Solved thank u again mate:) ________________________________ Από: Matthias Andree [mailto:matthias.andree@gmx.de] Αποστολή: Κυρ 14/11/2004 1:52 πμ Προς: Καράμπης Παναγιώτης Κοιν.: dovecot(a)dovecot.org Θέμα: Re: [Dovecot] Fatal: chdir(homedir) failed: Permission denied Καράμπης Παναγιώτης <epp719(a)epp.teicrete.gr> writes: > hello all i run dovecot as my imap server on my university and squirrel as webmail. But squirrel returns an error: > ERROR : Connection dropped by imap-server > CAPABILITY > > i tail my /var/log/dovecot and this is the output with whatever user i try to log in and view mails: > > dovecot: Nov 13 17:51:27 Fatal: chdir(/home/epp719) failed with uid 2975: Permission denied > dovecot: Nov 13 17:51:27 Error: child 17554 (imap) returned error 89 > ---------------------------------------------------------------------- > i give the: > root@(host edited):/root# ls -lad /home/epp719 Panagiotis, if the user epp719 and dovecot are in a common group, that may be the cause why it isn't working. > drwx---r-x 4 epp719 users 368 2004-11-13 17:49 /home/epp719 > and directory exists i tried also changing permissions on dir but same things happen. > both .qmail and Maildir exist in the home directory. What are the permissions of the / and /home directories? ls -lad /home -- can dovecot execute the / and /home directories? If these are drwx------ or similar, that might be the problem. Hope that helps. -- Matthias Andree

1 0

[Dovecot] Fatal: chdir(homedir) failed: Permission denied
by Καράμπης Παναγιώτης 14 Nov '04

14 Nov '04

hello all i run dovecot as my imap server on my university and squirrel as webmail. But squirrel returns an error: ERROR : Connection dropped by imap-server CAPABILITY i tail my /var/log/dovecot and this is the output with whatever user i try to log in and view mails: dovecot: Nov 13 17:51:27 Fatal: chdir(/home/epp719) failed with uid 2975: Permission denied dovecot: Nov 13 17:51:27 Error: child 17554 (imap) returned error 89 ---------------------------------------------------------------------- i give the: root@(host edited):/root# ls -lad /home/epp719 drwx---r-x 4 epp719 users 368 2004-11-13 17:49 /home/epp719 and directory exists i tried also changing permissions on dir but same things happen. both .qmail and Maildir exist in the home directory. I attach the dovecot.conf file... any help is appreciated! PS: Sorry about my english its not my native language.. oh i forgot squirrel gets data and attachments from mysql...

2 1

[Dovecot] make error
by Ken Woodward (IS) 12 Nov '04

12 Nov '04

Dear DINH and TIMO, Here are the last lines before the fatal error. It says that "set fnord ; amf=$2; \ " is the command that caused the error. Does this make any sense to you? "if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /r/downloads/dovecot-0.99.11/src *** Error code 1 The following command caused the error: set fnord ; amf=$2; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='src doc'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && make $local_target) \ || case "$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /r/downloads/dovecot-0.99.11 *** Error code 1 make: Fatal error: Command failed for target `all-recursive-am' /r/downloads/dovecot-0.99.11>"\ ============================================================================ ============================= I can include my complete config.log which does complete with no indication of failure reported at the end, BUT, inside it does list fatal errors like: "configure:2802: gcc -o conftest -g -O2 conftest.c -lcposix >&5 ld: fatal: library -lcposix: not found ld: fatal: File processing errors. No output written to conftest" AND "Undefined first referenced symbol in file socket /var/tmp//ccsUoghx.o ld: fatal: Symbol referencing errors. No output written to conftest collect2: ld returned 1 exit status configure:21217: $? = 1 configure: failed program was: | /* confdefs.h. */ " AND "Undefined first referenced symbol in file inet_addr /var/tmp//cceuY9Eo.o (symbol belongs to implicit dependency /usr/lib/libnsl.so.1) ld: fatal: Symbol referencing errors. No output written to conftest collect2: ld returned 1 exit status configure:21383: $? = 1 configure: failed program was: | /* confdefs.h. */ " ============================================================================ ================================= Thanks for your help. P.S. Was I supposed to send a new message to dovecot at dovecot dot org like this or reply to your message?

1 0

[Dovecot] make error
by Ken Woodward (IS) 12 Nov '04

12 Nov '04

Can anyone help with this? I get the following error when running "make". "configure" worked fine. I am installing the latest dovecot on a Solaris OS10 machine make: Fatal error: Command failed for target `all-recursive' **** Error code 1 Also could someone tell me if it is possible to search all the archives through the complete message bodies or are we limited to searching each month individually and only on the message subject? Thanks for any help, Sincerely, Ken

3 2

[Dovecot] pem help
by Clinton Mills 12 Nov '04

12 Nov '04

When I run this: /usr/local/sbin/dovecot -c /etc/dovecot.conf I get this Fatal: Can't use SSL certificate /etc/ssl/certs/dovecot.pem: No such file or directory But in my conf file these are commented out?? #ssl_cert_file = /usr/share/ssl/certs/dovecot.pem #ssl_key_file = /usr/share/ssl/private/dovecot.pem Why would I get this error? Thanks Clinton Mills

2 1

[Dovecot] pop3d keeps downloading messages over and over again
by Gordon Thagard 12 Nov '04

12 Nov '04

Solaris 9 SunOS 5.9 Generic_117171-11 sun4u sparc SUNW,Ultra-250 gcc version 3.3.2 dovecot-0.99.11 compile options: LDFLAGS=-L/usr/local/ssl/lib CPPFLAGS=-I/usr/local/ssl/include/openssl ./configure --prefix=/opt/dovecot --disable-ipv6 --with-file-offset-size=32 --with-mem-align=4 --with-rawlog --with-ssl=openssl OK, this applies whether or not a user account is set to leave mail on the server or not. There are several things that might happen, depending on who knows what: 1. Mail pops fine. 2. The "DO NOT DELETE THIS EMAIL" keeps downloading over and over again. 3. All emails since the switch to this new test dovecot pop3d will be downloaded over and over again. Any help would be greatly appreciated. Thank you, Gordon Thagard

2 2

[Dovecot] duplicate woes
by Jeff Ramsey 12 Nov '04

12 Nov '04

Hi, I have FC2/Sendmail/Dovecot default setup. I turned on POP3 and POP3S in /etc/dovecot.conf. I started out getting duplicates only when I was using Outlook w/ 'Leave copy on server' option. Lately, I've been getting duplicates at seemingly random messages sent to and from seemingly random users. Any help will be appreciated. Thanks, Jeff Ramsey Tubafor Mill, Inc.

2 1