- dovecot - dovecot.org

Re: [Dovecot] USER environment
by Tim Miller 29 Dec '03

29 Dec '03

On Mon, 29 Dec 2003, Evert Mouw wrote: > Browsing in the 2003-September archives, I found out how to start dovecot > from inetd (using imap-login instead of imap). Still I've got a few > problems. I prefer not using inetd, but that seams impossible (see my 1st > email). And telnetting to port 143 results in an immediate connection close. > Hmmm, I'll continue exploring the archives. What does the logfile say? If you're using syslog, dovecot uses the LOG_MAIL facility I think, so you might want to check whatever log that prints to. I had a couple problems like this, and it was because I had set up authentication incorrectly, so you may want to double check that. Best, Tim M.

1 0

[Dovecot] Fatal: USER environment missing
by Evert Mouw 29 Dec '03

29 Dec '03

I have some trouble installing dovecot, and maybe someone can help me. I have compiled dovecot on a Slackware Linux 9.0 running on a i586, and the imap program works OK (I tested it using the method described in the error reporting document). The make install procedure didn't create a correct /etc/rc.d/rc.dovecot file. I have created a dovecot user and group manually. Running just "dovecot" from the command line does not give any errors, but dovecot terminates and doesn't whow up with ps x. So I tried to start it from inetd, but starting dovecot from inetd results in something like "port 143 already in use", so I decided to start /usr/local/libexec/dovecot/imap directly from inetd, which results in Fatal: USER environment missing, even when using root for everyting (and the environment variable USER really exists). I fiddled with various options in the dovecot.conf file without any results. Now I'm stuck; the INSTALL document actually is a BUILD document and I can't find anything about post installation :-( Someone any ideas? Regards Evert Mouw

1 0

[Dovecot] New installation questions
by Jason Parsons 29 Dec '03

29 Dec '03

Howdy. I'm trying to get dovecot working on Solaris 9/sparc. I'm using LDAP as an authentication backend. After running dovecot and attemping an imap login, I'm getting this message: imap-login: Dec 29 01:52:29 Fatal: fd_send(4) failed: Bad file number imap-login: Dec 29 01:52:29 Fatal: fd_send(4) failed: Bad file number dovecot: Dec 29 01:52:29 Error: child 22972 (login) returned error 89 dovecot: Dec 29 01:52:29 Error: child 22973 (login) returned error 89 Any ideas what could cause this? Also, I would like to run dovecot using daemontools and qmail-ldap's auth_imap. Is this possible with dovecot? An example supervise/run file would be much appreciated. Thank you. - Jason Parsons

1 0

[Dovecot] Bugfix for use with "Opera mail" and "AnalogX"
by Gerhard Muntingh 23 Dec '03

23 Dec '03

Dear developers, [ Please CC me as I'm not subscribed to this list. ] In src/pop3-login/client.c: void client_send_line(struct pop3_client *client, const char *line) { o_stream_send_str(client->output, line); o_stream_send(client->output, "\r\n", 2); } Called as 'client_send_line(client "+OK dovecot");'. This function sends two packets to the client. It appears Opera mail and AnalogX proxy recognise the 1st packet as a complete welcome and send their "USER " command after receiving it. They then receive the newline in the next packet and get confused. This is very probably a bug in those two programs, but it would still be great if it could be fixed in the dovecot source. My personal fix involved a buffer on the stack (char tmp[LENGTH]) and some sanity checks wherein the newline is strcat'ed to the string. That's not very nice, but it works for me. Can someone please fix this? There may even be more pop clients having problems with this. kind regards, Gerhard Muntingh.

2 2

[Dovecot] Maildir quotas support in Dovecot and 2 other newbie questions
by Theodore Knab 21 Dec '03

21 Dec '03

I am not familiar with all the features that Dovecot has, but I am familiar with Courier IMAP using Maildir. Does Dovedot have a software based Maildir supporting quota program like Courier IMAP ? Can maildrop be used with Dovecot for quotas ? Courier IMAP has maildrop integrated. - If maildrop support is turned on in Courier IMAP, then a user will get a quota warning mail message each time they login to their account and are over the specified amount. Is there a recommended MTA to be used with the DoveCot IMAP server ? -- ------------------------------------------ Ted Knab Chester, MD 21619 ------------------------------------------ 35570707f6274702478656021626f6c6964796f6e602f66602478656 02e6164796f6e60237471647560216e6460276c6f62616c60257e696 4797e2a0

3 2

[Dovecot] Re: Bug#224092: Dovecot IMAP: detection of folders
by Jaldhar H. Vyas 20 Dec '03

20 Dec '03

On Tue, 16 Dec 2003, Jeroen van Disseldorp wrote: > Package: dovecot-imapd > Version: 0.99.10.4-2 > Severity: normal > > When accessing a maildir with "all folders" instead of "only subscribed > folders", dovecot wrongfully reports its index-files (.imap.*) as mail > folders. When the client (KMail 1.5.2 in my case) checks for email, it > aborts halfway with the message: > > Unable to get information about folder imap.index. The server replied: > Internal error [2003-12-15 23:53:05] > > I noticed the same thing with the .subscription-file, but that seems to > have disappeared after a reinstall of dovecot*. Squirrelmail, which > only checks subscribed folders, has no problems. > > The problem started with the last upgrade from 0.99.10.4-1 to -2. -1 was > working fine. I am using Debian GNU/Linux unstable (fully updated) with > kernel 2.4.18-686. I don't think the problem was caused by the upgrade as I only changed one Debian dependency. I am Cc'ing the Dovecot mailing list to see if the developer or anyone else has some insight into this. -- Jaldhar H. Vyas <jaldhar(a)debian.org> La Salle Debain - http://www.braincells.com/debian/

7 13

[Dovecot] multiple auth= statements
by Stephan van Beerschoten 16 Dec '03

16 Dec '03

I'm new to dovecot and it's configurations. Reading the config file, I have a question regarding having multiple auth= lines in there. Is this some sort of a pass-through or fail-through system of authentications like where if a user is not authenticated using 'pam', then the second method is tried (which might be sql or plain passwd-txt) ? Am I assuming the right thing here ? I have system-users, but am planning to migrate the majority of those users to a virtual_mailbox system (using postfix) where they have no more system-users . I just want to be sure this will work. If anybody has setup a system with postfix and virtual mailboxes in combination with dovecot, and wants to swap stories and setups, I'd be grateful :) /Stephan -- Stephan van Beerschoten [KeyID: 0x08F12864] "If you are adminstering UNIX systems and don't master tools such as make, shell, and perl, then you are working too hard." -- Wietse Venema. Fri, 12 Dec 2003

2 1

[Dovecot] Always 'new mail' false notifications?
by Stephan van Beerschoten 16 Dec '03

16 Dec '03

Hi, I just yesterday played around and installed dovecot. I like it a lot (except for the lack of mysql support), but I have one issue I can't seem to fix. I am using mutt as my mailclient and mutt will alert me whenever new mail has arrived in any mailfolder I have configured. The thing is, that mutt continously signals me of new mail in all my folders, when in reality nothing has entered there. Does this sound familiar to anyone ? All I can think of, is that something is happening with modification timestamps of my mailboxes which signals the new mail flag, but I don't know what causes it. A small description of my setup: One server running dovecot. I access mail locally via IMAP, but can also access the spoolfiles and mailfolders directly. I'm the only one with shell access. Procmail filters mail and delivers it to my mailfolders in ~/Mail. Any ideas ? -- Stephan van Beerschoten [KeyID: 0x08F12864] "To err is human, to forgive is Not Company Policy"

2 3

[Dovecot] Mailing list problems fixed
by Timo Sirainen 16 Dec '03

16 Dec '03

On Tue, 2003-12-16 at 12:00, mailman(a)dovecot.org wrote: > ...: host ...[...] said: 504 > <talvi>: Helo command rejected: need fully-qualified hostname (in reply to > RCPT TO command) Whops. 12 people's subscriptions got disabled because of that. It's fixed now and I've restored the subscriptions.

1 0

[Dovecot] corrupted empty message with CVS
by dean gaudet 08 Dec '03

08 Dec '03

with CVS as of an hour ago i'm seeing corruption of messages (in an mbox) with an empty message body. for example, here's what i have in my test INBOX right after receiving the empty message: --- top of INBOX --- >From dean(a)arctic.org Tue Nov 25 19:02:23 2003 Return-Path: <dean(a)arctic.org> Delivered-To: dgtest(a)arctic.org Received: (qmail 3626 invoked by uid 500); 26 Nov 2003 03:02:23 -0000 Received: from localhost (sendmail-bs(a)127.0.0.1) by 127.0.0.1 with SMTP; 26 Nov 2003 03:02:23 -0000 Date: Tue, 25 Nov 2003 19:02:23 -0800 (PST) From: dean gaudet <dean(a)arctic.org> To: dgtest(a)arctic.org Subject: quibble Message-ID: <Pine.LNX.4.58.0311251902160.15721(a)twinlark.arctic.org> X-comment: visit http://arctic.org/~dean/legal for information regarding copyright and disclaimer. MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp) on twinlark.arctic.org X-Spam-Level: X-Spam-Status: No, hits=0.0 required=5.0 tests=none autolearn=ham version=2.60 --- end of INBOX --- and then i use pine 4.58 to access {localhost}INBOX and it shows a corrupted message (no subject/etc) then i quit pine, and here's what the INBOX looks like on disk afterwards: --- top of INBOX --- >From dean(a)arctic.org Tue Nov 25 19:02:23 2003 X-IMAPbase: 1069815483 6 Status: RO X-UID: 6 Content-Length: 0 X-Keywords: --- end of INBOX --- any ideas or other info which would be useful? thanks -dean

2 5