- dovecot - dovecot.org

Re: Re: Quota count and clone questions
by Bratislav ILIC 03 Sep '19

03 Sep '19

Hi, I presume you figured this out after all this time, but in any case. Since quota_clone is not cumulative, it always inserts new record with actual quota, to be able to get correct results in postfixadmin one must: DROP TRIGGER mergequota2 ON quota2; And to prevent ERROR: duplicate key value violates unique constraint "quota2_pkey": CREATE FUNCTION public.clone_quota2() RETURNS trigger LANGUAGE plpgsql AS $$ BEGIN UPDATE quota2 SET bytes = NEW.bytes, messages = NEW.messages WHERE username = NEW.username; IF found THEN RETURN NULL; ELSE RETURN NEW; END IF; END; $$; And then: CREATE TRIGGER clonequota2 BEFORE INSERT ON quota2 FOR EACH ROW EXECUTE PROCEDURE public.clone_quota2() ; And finally just put: quota_clone_dict = proxy::sqlquota Hope this helps somebody trying to figure out this too. > I figured out that I can't just drop maintaining quota2 if I want > postfixadmin to report the quota status. > > I also figured out a way to run a test on my config guesses. I will try > to fit it in today, or tomorrow. But any advise to the questions below > are welcomed! > >>On 2/13/19 8:53 PM, Robert Moskowitz via dovecot wrote: >> all this almost reads like I can drop maintaining the quota2 table? >> >> From https://wiki.dovecot.org/Quota/Count >> >> mailbox_list_index = yes >> # Avoid spending excessive time waiting for the quota calculation to >> finish when >> # mails' vsizes aren't already cached. If this many mails are opened, >> finish the >> # quota calculation on background in indexer-worker process. Mail >> deliveries will >> # be assumed to succeed, and explicit quota lookups will return >> internal error. >> mail_vsize_bg_after_count = 100 >> >> seems to belong in 10-mail.conf. That is where those var are shown. >> >> But: >> >> >> plugin { >> # 10MB quota limit >> quota = count:User quota >> quota_rule = *:storage=10M >> >> # This is required - it uses "virtual sizes" rather than "physical >> sizes" for quota counting: >> quota_vsizes = yes >> } >> >> I am having problems with. Right now for quota I have: >> >> plugin { >> quota = dict:user::proxy::sqlquota >> trash = /etc/dovecot/dovecot-trash.conf.ext >> } >> >> How do I reconcile these two? >> >> Then for clone: https://wiki.dovecot.org/Plugins/QuotaClone >> >> how does: >> >> mail_plugins = $mail_plugins quota quota_clone >> plugin { >> quota_clone_dict = redis:host=127.0.0.1:port=6379 >> } >> >> get replaced with something for mysql? >> >> dovecot-sql.conf.ext: >> >> driver = mysql >> connect = host=/var/lib/mysql/mysql.sock dbname=postfix user=postfix >> password=$Postfix_Database_Password >> default_pass_scheme = $cryptsha-CRYPT >> # following should all be on one line. >> password_query = SELECT username as user, password, >> concat('/home/vmail/', maildir) as userdb_home, >> concat('maildir:/home/vmail/', maildir) as userdb_mail, 101 as >> userdb_uid, 12 as userdb_gid FROM mailbox WHERE username = '%u' AND >> active = '1' >> # following should all be on one line >> user_query = SELECT concat('/home/vmail/', maildir) as home, >> concat('maildir:/home/vmail/', maildir) as mail, 101 AS uid, 12 AS >> gid, CONCAT('*:messages=30000:bytes=', quota) as quota_rule FROM >> mailbox WHERE username = '%u' AND active = '1' >> >> and >> >> dovecot-dict-sql.conf.ext: >> >> connect = host=/var/lib/mysql/mysql.sock dbname=postfix user=postfix >> password=$Postfix_Database_Password >> map { >> pattern = priv/quota/storage >> table = quota2 >> username_field = username >> value_field = bytes >> } >> map { >> pattern = priv/quota/messages >> table = quota2 >> username_field = username >> value_field = messages >> } >> >> >> >> thanks

1 0

Dovecot 2.3.7 - char "-" missing
by Domenico Pastore 03 Sep '19

03 Sep '19

Hello, i have update dovecot from version 2.2.15 to 2.3.7.2. I have a problem with mine java software because there is a different response when open connection to doveadm. I need open socket to doveadm for get imap quota of a mailbox. With version 2.2.15: # telnet 192.160.10.4 924 Trying 192.160.10.4... Connected to 192.160.10.4. Escape character is '^]'. - With version 2.3.7.2: # telnet 192.160.10.3 924 Trying 192.160.10.3... Connected to 192.160.10.3. Escape character is '^]'. The difference is "-" character. The version 2.3.7 not respond with "-" character after opening the connection. Is it possible to add the character again with a parameter? Why did doveadm's answer change? Br Domenico

3 2

Segfault with error 4 in doveadm-server
by holger＠dehnhardt.org 03 Sep '19

03 Sep '19

I set up dovecot on two servers with replication enabled. The replication is over a vpn connection. I get massive segfaults from doveadm-server every few minutes. dmesg: doveadm-server[30030]: segfault at 0 ip 0000557fa16d2e62 sp 00007ffdcaafec50 error 4 in doveadm-server[557fa16a3000+41000] [486397.225636] Code: 40 03 4c 8d 3c c3 48 8d 44 24 18 48 89 44 24 08 0f 1f 84 00 00 00 00 00 49 8b bc 24 60 01 00 00 e8 e3 2a 00 00 48 89 44 24 18 <48> 8b 13 48 8d 35 c4 8d 00 00 48 89 c7 e8 2c 2b 00 00 31 c0 c6 45 mail.err dovecot: doveadm: Fatal: master: service(doveadm): child 29507 killed with signal 11 (core dumps disabled) I am absolutely unaware of how I can come to the cause of this error. Can anyone give me a hint? ----------------------------- Configuration: # 2.2.13: /etc/dovecot/dovecot.conf # OS: Linux 5.1.14-xen x86_64 Debian 8.11 auth_debug = yes disable_plaintext_auth = no doveadm_password = xxxx doveadm_port = 4711 listen = * mail_access_groups = vmail mail_gid = vmail mail_home = /var/vmail/%d/%n mail_location = maildir:~/mail mail_plugins = " notify replication" mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size mail_replica = tcp:backup-vpn.local:12345 sieve = ~/.dovecot.sieve sieve_after = ~/sieve/after sieve_before = ~/sieve/before sieve_default = /var/vmail/%d/default.sieve sieve_dir = ~/sieve } protocols = " imap sieve pop3" service aggregator { fifo_listener replication-notify-fifo { mode = 0666 user = vmail } unix_listener replication-notify { mode = 0666 user = vmail } } service auth { unix_listener auth-client { group = vmail mode = 0660 user = vmail } unix_listener auth-userdb { mode = 0666 user = vmail } } service config { unix_listener config { user = vmail } } service doveadm { client_limit = 1 idle_kill = 0 inet_listener { address = master-vpn.local port = 12345 } process_limit = 0 process_min_avail = 0 user = vmail } service replicator { client_limit = 0 drop_priv_before_exec = no idle_kill = 4294967295 secs process_limit = 1 process_min_avail = 0 service_count = 0 unix_listener replicator-doveadm { group = vmail mode = 0666 user = dovecot } vsz_limit = 8 G } ssl_cert = </etc/ssl/certs/xxx.cert ssl_key = </etc/ssl/private/xxx.key userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol sieve { managesieve_implementation_string = Dovecot Pigeonhole managesieve_max_line_length = 65536 } protocol lda { mail_plugins = " notify replication acl sieve" } protocol imap { mail_plugins = " notify replication acl" }

3 6

LMTP Post login script for acl_groups
by lists＠mlserv.org 03 Sep '19

03 Sep '19

Hi, I use a post login script for imap, to fetch acl groups from LDAP. Because Dovecot can only deal with a single value, which must be a comma seperated list of groups, I decided to use a post login script do deal with multi values in LDAP: This looks like this in LDAP: rnsMSACLGroup: admin rnsMSACLGroup: automx rnsMSACLGroup: amavis rnsMSACLGroup: postfix rnsMSACLGroup: dovecot rnsMSACLGroup: rspamd rnsMSACLGroup: powerdns rnsMSACLGroup: sogo rnsMSACLGroup: zabbix rnsMSACLGroup: dane-users rnsMSACLGroup: gentoo rnsMSACLGroup: openbsd My post login script looks like this: --------------------------------------------------------- #!/bin/sh BINDDN='cn=dovecot-postlogin,ou=people,ou=it,dc=roessner-net,dc=de' BINDPWFILE='/etc/dovecot/ldap-postlogin.secret' BASE='ou=people,ou=it,dc=roessner-net,dc=de' LDAPSEARCH="/usr/bin/ldapsearch" AWK="/usr/bin/awk" test -x ${LDAPSEARCH} || exec "$@" test -x ${AWK} || exec "$@" ACL_GROUPS=$( ${LDAPSEARCH} -LLL -ZZ -y ${BINDPWFILE} -xD ${BINDDN} -b ${BASE} "(rnsMSDovecotUser=${USER})" rnsMSACLGroup | \ grep rnsMSACLGroup | \ ${AWK} -vORS=, '{ print $2 }' | \ sed 's/,$/\n/' ) export ACL_GROUPS export USERDB_KEYS="${USERDB_KEYS} acl_groups" exec "$@" --------------------------------------------------------- This script is included in imap-postlogin executables and works for logged in users. But it does not work for LMTP. LMTP itself seems not to have any permissions to access the folders associated with these groups. I thought, I simply could add the imap-postlogin block to lmtp-postlogin and that would work, but it doesn't. So here is the question: What am I missing in Dovecot that LMTP can also have ACL_GROUPS like the imap service? Here is my config (non-defaults): --------------------------------------------------------- doveconf -n # 2.3.7.1 (0152c8b10): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.7.1 (db5c74be) # OS: Linux 4.19.44-gentoo x86_64 Gentoo Base System release 2.6 # Hostname: mx.roessner-net.de auth_cache_size = 64 M auth_master_user_separator = * auth_mechanisms = plain login auth_ssl_username_from_cert = yes auth_verbose = yes default_client_limit = 5000 default_process_limit = 500 default_vsz_limit = 512 M disable_plaintext_auth = no hostname = mail.roessner-net.de imap_client_workarounds = tb-extra-mailbox-sep tb-lsub-flags imap_max_line_length = 4 M lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lmtp_rcpt_check_quota = yes login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c %k mail_access_groups = vmail mail_attachment_dir = /var/mail/virtual/copymail/attachments mail_gid = vmail mail_location = sdbox:~/sdbox mail_max_keyword_length = 4096 mail_plugins = quota acl fts fts_lucene zlib mail_log notify mail_privileged_group = mail mail_save_crlf = yes mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext vacation-seconds imapsieve vnd.dovecot.imapsieve mdbox_preallocate_space = yes mdbox_rotate_size = 128 M namespace { list = children location = sdbox:%%h/sdbox prefix = Shared/%%u/ separator = / subscriptions = no type = shared } namespace { hidden = no list = children location = maildir:/var/mail/virtual/public:INDEXPVT=~/Maildir/public prefix = Public/ separator = / subscriptions = no type = public } namespace inbox { inbox = yes location = mailbox Archive { auto = subscribe special_use = \Archive } mailbox "Deleted Messages" { special_use = \Trash } mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk-E-Mail { special_use = \Junk } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / type = private } passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes pass = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile:/etc/dovecot/dovecot-acl:cache_secs=300 acl_shared_dict = file:/var/mail/virtual/shared-mailboxes.db fts = lucene fts_autoindex = yes fts_lucene = whitespace_chars=@. imapsieve_mailbox1_before = file:/etc/dovecot/sieve/rspamd.d/report-spam.sieve imapsieve_mailbox1_causes = COPY FLAG imapsieve_mailbox1_name = Junk imapsieve_mailbox2_before = file:/etc/dovecot/sieve/rspamd.d/report-ham.sieve imapsieve_mailbox2_causes = COPY imapsieve_mailbox2_from = Junk imapsieve_mailbox2_name = * mail_log_events = delete undelete expunge copy save mailbox_create mailbox_delete mailbox_rename mail_log_fields = box msgid quota = count:User quota quota_grace = 10%% quota_rule = *:storage=300M:messages=20000 quota_rule2 = Trash:storage=+500M quota_rule3 = Sent:storage=+2G quota_rule4 = Archive:storage=+2G quota_status_nouser = DUNNO quota_status_overquota = 552 5.2.2 Mailbox is full quota_status_success = DUNNO quota_vsizes = yes quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u quota_warning3 = -storage=100%% quota-warning below %u sieve = file:~/sieve;active=~/.dovecot.sieve sieve_after = /etc/dovecot/sieve/after sieve_before = /etc/dovecot/sieve/before sieve_extensions = +vacation-seconds sieve_global_extensions = +vnd.dovecot.pipe +vnd.dovecot.execute +vnd.dovecot.debug sieve_pipe_bin_dir = /usr/bin sieve_plugins = sieve_imapsieve sieve_extprograms sieve_vacation_default_period = 10d sieve_vacation_max_period = 30d sieve_vacation_min_period = 1h zlib_save = gz zlib_save_level = 6 } protocols = imap pop3 lmtp submission sieve service auth-worker { extra_groups = ssl-cert unix_listener auth-worker { mode = 0600 user = vmail } user = vmail } service auth { extra_groups = ssl-cert unix_listener /var/spool/postfix-submission/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { mode = 0600 user = vmail } user = vmail } service config { unix_listener config { mode = 0600 user = vmail } } service dict { unix_listener dict { mode = 0600 user = vmail } } service imap-login { inet_listener imap { address = 127.0.0.1 134.255.226.248 ::1 2a05:bec0:28:1:134:255:226:248 } inet_listener imaps { port = 0 } } service imap-postlogin { executable = script-login /usr/local/bin/dovecot-masteruser.sh /usr/local/bin/dovecot-lastlogin.sh /usr/local/bin/dovecot-aclgroups.sh user = vmail } service imap { executable = imap imap-postlogin } service lmtp-postlogin { executable = script-login /usr/local/bin/dovecot-aclgroups.sh user = vmail } service lmtp { executable = lmtp lmtp-postlogin inet_listener lmtp { address = 127.0.0.1 port = 24 } unix_listener /var/spool/postfix/private/lmtp-dovecot { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve { address = 127.0.0.1 134.255.226.248 ::1 2a05:bec0:28:1:134:255:226:248 } } service pop3-login { inet_listener pop3 { address = 127.0.0.1 134.255.226.248 ::1 2a05:bec0:28:1:134:255:226:248 } inet_listener pop3s { port = 0 } } service quota-status { client_limit = 1 executable = quota-status -p postfix inet_listener { address = 127.0.0.1 port = 12340 } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh extra_groups = mail unix_listener quota-warning { group = vmail mode = 0600 user = vmail } user = vmail } ssl_cert = </etc/ssl/mail.roessner-net.de/cert/fullchain.pem ssl_cipher_list = ALL:!DH:!kRSA:!SRP:!kDHd:!DSS:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!PSK:!RC4:!ADH:!LOW@STRENGTH ssl_client_cert = </etc/ssl/mail.roessner-net.de/cert/fullchain.pem ssl_client_key = # hidden, use -P to show it ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it ssl_min_protocol = TLSv1.2 ssl_prefer_server_ciphers = yes submission_client_workarounds = whitespace-before-path submission_relay_host = mail.roessner-net.de submission_relay_port = 5870 submission_relay_ssl = starttls submission_relay_trusted = yes userdb { args = /etc/dovecot/dovecot-ldap-userdb.conf.ext driver = ldap } verbose_proctitle = yes protocol lmtp { mail_plugins = quota acl fts fts_lucene zlib mail_log notify sieve } protocol lda { mail_plugins = quota acl fts fts_lucene zlib mail_log notify sieve } protocol imap { mail_max_userip_connections = 50 mail_plugins = quota acl fts fts_lucene zlib mail_log notify imap_quota imap_acl imap_zlib imap_sieve } protocol submission { login_greeting = ESMTP } --------------------------------------------------------- Thanks for any help in advance Christian

3 15

dovecot 2.2 repo
by Bas van Rooijen 02 Sep '19

02 Sep '19

Hi, >From the v2.2.36.4 announcement message: "Binary packages are available at https://repo.dovecot.org/" My question is, where exactly? There's an instruction at repo.dovecot.org that tells you to replace 'ce-latest-2.3' with 'ce-<version>' but the given url doesn't even contain 'ce-latest-2.3' and http://repo.dovecot.org/ce-2.2.36 returns a 404. Thanks in advance! bvr.

4 3

Experimental docker images
by aki.tuomi＠dovecot.fi 02 Sep '19

02 Sep '19

Hi, you can now find experimental Docker images for dovecot CE releases (starting from 2.3.7.2) from https://hub.docker.com/r/dovecot/dovecot You can find instructions and more details on the repository page. ---- Aki

1 0

Re: Message delivered twice caused by an LMTP error "Got unexpected reply" during upgrade to 2.3
by Gabriele Nencioni 02 Sep '19

02 Sep '19

>>> On 08/09/2018 09:12 AM, Stephan Bosch wrote >>>>>> Can you make a pcap log of the LMTP communication between the two >>>>>> Dovecot hosts? That may give me a clue on which side of the >>>>>> communication is causing the issue. >>>>> Yes sure, where I can send it? >>>>> Here on list or at your address? >>>> >>>> Just send it to me. On 08/16/2018 10:21 AM, Stephan Bosch wrote: > Op 16/08/2018 om 09:46 schreef Gabriele Nencioni: >> On 08/15/2018 06:39 PM, Stephan Bosch wrote: >>> Op 15-8-2018 om 17:19 schreef Stephan Bosch: >>>> >>>> Op 13-8-2018 om 15:50 schreef Gabriele Nencioni: >>>>> So the scenario seems to be: >>>>> the error occurs between old directors and new backends >>>>> and between the new backends and the smtp submission_host (for >>>>> redirection) >>>>> and using the pipeline capability and attaching a file >>>>> >>>>> Let me know if you need more info >>>> In this case it is possible to obtain a debug log by enabling >>>> mail_debug=yes. Can you obtain a full debug log for such a failing >>>> submission session? >> Ok! It is attached. > > That is just weird. Dovecot reports that it cannot fully send the last > bits of the message and right thereafter the reply is received, which > Dovecot then interprets as out-of-sequence. The PCAP files tell me the > final CRLF.CRLF is actually sent to the other side, but somehow Dovecot > thinks it couldn't do that yet. > > Is this problem occurring for any and all SMTP client interactions, or > just every once in a while? Unfortunately it occurs just every once in a while and it is weird because at the second attempt the message is successful delivered or redirected. >>> Also, I don't see anything weird in the PCAP files: the command-reply >>> sequence is OK. This means that this is likely a bug in the current >>> Dovecot version. Those debug logs should tell me more. >> Ok! Which version of dovecot do you suggest to install? >> On debian current stable (stretch) repository there is the version >> number 2.2.27, have we to install it? > > If you're facing big trouble it is usually best to revert to the > previous version that worked I guess. Ok I'm agree! So, about you, which version can I try to install the 2.2.27 or the previous release of the 2.3 version such as v2.3.2 2018-06-29 or v2.3.1 2018-02-29? Regards, -- Gabriele Nencioni System Administrator eml gabriele.nencioni(a)register.it

2 6

purge causing reappearing mails?
by sch tel 02 Sep '19

02 Sep '19

3 3

flags not synced correctly with dovecot sync (dsync)
by Dan Christensen 31 Aug '19

31 Aug '19

I'm running dovecot 2.3.4.1 from https://repo.dovecot.org/ on Ubuntu 18.04 on three machines that I'll call server, laptop1 and laptop2. Both laptop1 and laptop2 run dovecot sync against server to keep local copies of my imap folders. Even when I initially had only two machines, laptop1 and server, I occasionally noticed that flags were lost, usually custom flags used by Gnus, but I couldn't reliably reproduce the problem. Now that I have two laptops syncing against the server, the problem has gotten worse and I figured out a way to reproduce it: - on server: create new IMAP folder test, and put two read messages in it - on laptop1: doveadm sync -u user -l 10 -m test -f user@server - on laptop2: doveadm sync -u user -l 10 -m test -f user@server At this point, all three machines show the two messages M1 and M2 as being read. - on laptop1: mark message M1 unread - on laptop2: mark message M2 unread - on laptop1: doveadm sync -u user -l 10 -m test -f user@server Both laptop1 and server have M1 unread, M2 read, as expected. - on laptop2: doveadm sync -u user -l 10 -m test -f user@server Now laptop2 and server have M1 *read*, M2 unread. - on laptop1: doveadm sync -u user -l 10 -m test -f user@server Now laptop1 and the server have both M1 and M2 *read*. - on laptop2: doveadm sync -u user -l 10 -m test -f user@server Now laptop2 has both read as well. The two lines that say "*read*" are wrong in my opinion. dsync propagated a read mark to an unread message, even though that message was marked unread more recently than it was marked read. I usually use stateful sync, and get many related problems. I just did a test in which M1 and M2 started out read, and I started with empty files named dstate.test on laptop1 and laptop2. Then I did the above procedure, using the command doveadm sync -u user -l 10 -m test -s "`cat dstate.test`" user@server > dstate.test At the end, laptop2 and server had both messages unread (which is good), but laptop1 had only M1 unread, and repeated runs of the sync command did not correct this. So the stateful sync failed to detect a change. Are these bugs in dovecot? Is there more information that I can provide? The output of doveconf -n on one machine is below, and the others are almost identical. Thanks for any help! Dan # 2.3.4.1 (3c0b8769e): /etc/dovecot/dovecot.conf # OS: Linux 4.15.0-45-generic x86_64 Ubuntu 18.04.1 LTS # Hostname: laptop2 auth_mechanisms = plain login listen = 127.0.0.1 mail_index_log2_max_age = 10 days mail_index_log_rotate_min_age = 1 days mail_index_log_rotate_min_size = 300 k mail_location = maildir:~/Maildir namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = scheme=CRYPT username_format=%u /etc/dovecot/users driver = passwd-file } protocols = imap service imap-login { inet_listener imap { address = * port = 143 } inet_listener imaps { address = * port = 943 ssl = yes } } service imap { process_limit = 25 } ssl_cert = </etc/dovecot/private/dovecot.pem ssl_client_ca_dir = /etc/ssl/certs ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } protocol lda { postmaster_address = [elided] } protocol imap { mail_max_userip_connections = 20 }

3 8

Sieve Header question.
by Larry Rosenman 31 Aug '19

31 Aug '19

I'm trying to make my github processing better, but I'm missing something. I have the following: if address :all :contains "from" ["github.com"] { addflag "github"; addflag "MyFlags" "github"; set "mailbox" "GitHub"; if address :matches :user "to" "*" { set "GHUser" "${1}"; addflag "${GHUser}"; addflag "MyFlags" "${GHuser}"; } if header :matches "List-ID" "(.*/.*) <(.*)>" { set "mailbox" "github-lists/${1}"; } fileinto :flags "${MyFlags}" :create "${mailbox}"; stop; } I'm trying to match the apache-incubator-superset part of: List-ID: apache/incubator-superset <incubator-superset.apache.github.com> What am I missing? -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 214-642-9640 (c) E-Mail: larryrtx(a)gmail.com US Mail: 5708 Sabbia Dr, Round Rock, TX 78665-2106

1 1