- dovecot - dovecot.org

Re: High availability of Dovecot
by Gerald Galster 12 Apr '19

12 Apr '19

> Am 11.04.2019 um 11:48 schrieb luckydog xf <luckydogxf(a)gmail.com>: > > As your statement, nothing speical is needed to do except setting up DNS MX records, right? MX records are for incoming MAIL: yourdomain.com <http://yourdomain.com/> IN MX 100 mail1.yourdomain.com <http://server1.yourdomain.com/> yourdomain.com <http://yourdomain.com/> IN MX 100 mail2.yourdomain.com <http://mail2.yourdomain.com/> -> both priority 100 = 50/50 load balancing (globally, not when checked on a single resolver!) Then you need A Records (AAAA for ipv6) mail1.yourdomain.com IN A 192.168.10.1 mail2.yourdomain.com <http://mail2.yourdomain.com/> IN A 192.168.20.1 mail.yourdomain.com IN A 192.168.10.1 mail.yourdomain.com IN A 192.168.20.1 mail1/mail2 is for direct connection (MTAs) Your users (outlook, thunderbird, ...) connect to mail.yourdomain.com <http://mail.yourdomain.com/> which returns the two ip addresses. In this scenario MUA just connects to mail.yourdomain.com <http://mail.yourdomain.com/> and randomly uses one of the two ips. You can't control which one, but this gives you active/active loadbalancing. In case one server is down the MUA just uses the other ip. dsync replicates bi-directionally so that both servers are up-to-date. You don't need shared storage, every server is a copy of the other. If you want to use shared storage, then dsync is not for you because there is nothing to sync at that stage. I would use shared storage only if you need to have more than two servers. The above setup has no locking problems and is performant due to local filesystems. It depends on how many users you have and how much storage you need. You could buy two 2HE servers with 24 2.5" disks each (up to 96 with 4 HE), which may be sufficient for your needs. > User's mail store is running on shared storage, basically user's MUA connects to primary MX , the backup one is used once Primary is down. If you're not using Maildir beware of locking issues with concurrent access. It could crash indices. > It's a native HA of email system? I'll test those solution out. Yes, it works well with small setups. For big setups you'd typically use dovecot director, shared storage, object storage ... but you need more servers and it is way more complex and expensive. Best regards Gerald

3 3

failed: read(/var/run/dovecot/dns-client)
by Laura Smith 12 Apr '19

12 Apr '19

=== dsync(foobar(a)example.com): Error: imapc(foobar.example.com:993): dns_lookup(foobar.example.com) failed: read(/var/run/dovecot/dns-client) failed: read(size=512) failed: Connection reset by peer dsync(foobar(a)example.com): Error: Failed to initialize user: imapc: Login to foobar.example.com failed: Disconnected from server === Initially I thought "oh no, not another AppArmor block". But then surely the second message would not appear if the DNS lookup was not successful ? Also "dig foobar.example.com" works fine. How should I be troubleshooting this ? And if it is still likely to be AppArmor, what is calling it ? "doveadm" itself or something else ? What does "/var/run/dovecot/dns-client" do and why doesn't dovecot use standard OS calls like everyone else ? So many questions !

3 18

auth-worker unknown user
by Laura Smith 11 Apr '19

11 Apr '19

pam(foobar(a)example.com,192.0.1.1,<9zMTUUCGNfHZzMpL>): unknown user (SHA1 of given password: ff75068c2f4d700a49dae204d56477a5ffa5d23d) The password is correct, i.e. 'echo -n 'passed' | openssl dgst -sha1' matches. The user is setup correctly in /etc/dovecot/users (the /etc/dovecot/users was copied from another known-good server, so the syntax is correct and appropriate adjustments have been made for chmod and directory). doveconf -N follows: # 2.3.3 (dcead646b): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.3 (f018bbab) # OS: Linux 4.12.14-lp150.12.48-default x86_64 # Hostname: foobar auth_mechanisms = plain login auth_verbose = yes auth_verbose_passwords = sha1 doveadm_password = # hidden, use -P to show it first_valid_uid = 471 imapc_features = rfc822.size fetch-headers imapc_host = foobar.example.com imapc_password = # hidden, use -P to show it imapc_port = 993 imapc_ssl = imaps imapc_user = %u mail_location = maildir:~/Maildir mail_plugin_dir = /usr/lib64/dovecot/modules mail_prefetch_count = 20 mailbox_list_index = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body environment mailbox date ihave enotify namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam name = } plugin { sieve = file:~/.dovecot.sieve } protocols = imap lmtp service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } } service imap-login { process_min_avail = 3 } service lmtp { process_min_avail = 5 unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } user = my_virtmailuser } service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieves { address = port = 5190 ssl = yes } } ssl = required ssl_ca = </etc/dovecot/ssl/certbot_ca.pem ssl_cert = </etc/dovecot/ssl/certbot.pem ssl_cipher_list = ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA:ECDHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:ECDHE-ECDSA-DES-CBC3-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:DES-CBC3-SHA:!DSS ssl_client_ca_dir = /etc/ssl/certs ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it ssl_min_protocol = TLSv1.2 ssl_options = no_compression ssl_prefer_server_ciphers = yes userdb { driver = passwd name = } userdb { args = scheme=ARGON2ID username_format=%u /etc/dovecot/users auth_verbose = yes driver = passwd-file name = } protocol lmtp { mail_plugins = sieve postmaster_address = foobar(a)example.com } protocol lda { deliver_log_format = msgid=%m: %$ mail_plugins = sieve postmaster_address = postmaster quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } protocol imap { mail_max_userip_connections = 20 }

2 7

LMTP, PAM session and home directory autocreation
by Ivars Strazdins 11 Apr '19

11 Apr '19

Hi, mail is delivered by Dovecot's LMTP locally and I need user's home directory to be created if it doesn't exist yet. There is a setting in Dovecot's configuration, "session=yes", in /etc/Dovecot/conf.d/auth-system.conf.ext, which should do that. passdb { driver = pam args = session=yes dovecot } But I think it does not work in my setup because I do not see any PAM log entry for Dovecot in system log when this error happens: Apr 9 13:01:55 mailhost dovecot: lmtp(2935): Connect from local Apr 9 13:01:55 mailhost dovecot: lmtp(2935, testuser): Error: User initialization failed: Namespace '': mkdir(/home/testuser/Maildir) failed: Permission denied (euid=174000327(testuser) egid=174000327(testuser ) missing +w perm: /home, dir owned by 0:0 mode=0755) Apr 9 13:01:55 mailhost dovecot: lmtp(2935): Disconnect from local: Successful quit The error above seems expected, because it is not LMTP agent's job to create user's home directory but pam_oddjob_mkhomedir.so module should do that. Right? And there are common PAM log entries for every user session: Apr 9 13:24:42 mailhost auth: pam_sss(dovecot:auth): authentication success; logname= uid=0 euid=0 tty=dovecot ruser=validuser rhost=::1 user= validuser Apr 9 13:24:42 mailhost auth: pam_unix(dovecot:session): session opened for user validuser by (uid=0) Apr 9 13:24:42 mailhost auth: pam_unix(dovecot:session): session closed for user validuser How to debug this problem and find out why Dovecot does not open PAM session or - if I am wrong and it does, then what else is going wrong? Home directory autocreation is configured with command "authconfig --enablemkhomedir --update" and it works if user logs into system via shell or webmail. I tried to enable "mail_debug" in Dovecot's settings, but it did not give me any more information on PAM session. Running on Centos 7.6, with Dovecot 2.2.36. It looks like a common mistake or issue, because I am not alone: http://tinyurl.com/y6kjhsnw Thank you very much in advance for your time. Ivars /etc/pam.d/dovecot #%PAM-1.0 auth required pam_nologin.so auth include password-auth account include password-auth session include password-auth /etc/pam.d/password-auth #%PAM-1.0 # This file is auto-generated. # User changes will be destroyed the next time authconfig is run. auth required pam_env.so auth [default=1 success=ok] pam_localuser.so auth [success=done ignore=ignore default=die] pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 1000 quiet_success auth sufficient pam_sss.so forward_pass auth required pam_deny.so account required pam_unix.so account sufficient pam_localuser.so account sufficient pam_succeed_if.so uid < 1000 quiet account [default=bad success=ok user_unknown=ignore] pam_sss.so account required pam_permit.so password requisite pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type= password sufficient pam_unix.so sha512 shadow nullok try_first_pass use_authtok password sufficient pam_sss.so use_authtok password required pam_deny.so session optional pam_keyinit.so revoke session required pam_limits.so -session optional pam_systemd.so session optional pam_oddjob_mkhomedir.so umask=0077 session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so session optional pam_sss.so doveconf -n # 2.2.36 (1f10bfa63): /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.24 (124e06aa) # OS: Linux 3.10.0-957.10.1.el7.x86_64 x86_64 CentOS Linux release 7.6.1810 (Core) # Hostname: mailhost.example.com auth_mechanisms = plain login auth_socket_path = /var/run/dovecot/auth-master auth_username_format = %Ln auth_verbose = yes default_client_limit = 3500 default_process_limit = 500 disable_plaintext_auth = no first_valid_uid = 203 imap_client_workarounds = tb-lsub-flags tb-extra-mailbox-sep lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lmtp_save_to_detail_mailbox = yes mail_location = maildir:~/Maildir:INBOX=~/Maildir:LAYOUT=fs mail_plugins = " fts fts_lucene" mail_privileged_group = mail maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext imapsieve vnd.dovecot.imapsieve mbox_write_locks = fcntl namespace inbox { inbox = yes list = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / type = private } passdb { args = session=yes dovecot driver = pam } plugin { autocreate = Junk autocreate2 = Sent autocreate3 = Drafts autocreate4 = Trash autosubscribe = Junk autosubscribe2 = Sent autosubscribe3 = Drafts autosubscribe4 = Trash fts = lucene fts_lucene = whitespace_chars=@. imapsieve_mailbox1_before = file:/usr/lib64/dovecot/sieve/report-spam.sieve imapsieve_mailbox1_causes = COPY imapsieve_mailbox1_name = Junk imapsieve_mailbox2_before = file:/usr/lib64/dovecot/sieve/report-ham.sieve imapsieve_mailbox2_causes = COPY imapsieve_mailbox2_from = Junk imapsieve_mailbox2_name = * sieve = file:~/sieve;active=~/roundcube.sieve sieve_before = /var/lib/sieve/junk.sieve sieve_global_extensions = +vnd.dovecot.pipe +vnd.dovecot.environment sieve_pipe_bin_dir = /usr/lib64/dovecot/sieve sieve_plugins = sieve_imapsieve sieve_extprograms } pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %v.%u protocols = imap pop3 lmtp sieve service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = user mode = 0660 user = root } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } ssl_cert = </etc/letsencrypt/live/webmail.example.com/fullchain.pem ssl_key = # hidden, use -P to show it syslog_facility = local0 userdb { driver = passwd } valid_chroot_dirs = /var/mail:/home protocol lmtp { mail_fsync = never mail_plugins = " fts fts_lucene sieve" postmaster_address = postmaster(a)example.com } protocol lda { mail_fsync = never mail_plugins = " fts fts_lucene sieve expire" } protocol imap { mail_max_userip_connections = 25 mail_plugins = " fts fts_lucene fts fts_squat expire imap_sieve" } protocol sieve { managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date } protocol pop3 { mail_max_userip_connections = 20 mail_plugins = " fts fts_lucene fts fts_squat expire" }

1 0

High availability of Dovecot
by luckydog xf 11 Apr '19

11 Apr '19

Hi, list, I'm going to deploy postfix + dovecot + CephFS( as Mail Storage). Basically I want to use two servers for them, which is kind of HA. My idea is that using keepalived or Pacemaker to host a VIP, which could fail over the other server once one is down. And I'll use Haproxy or Nginx to schedule connections to one of those server based on source IP( Session stickiness), I'll use VIP as DNS record.etc, is my plan doable? I know MX could be server ones with different priority. But I think it brings along shortage that DNS couldn't know Email server is up or down, it just returns results to MUA, right? Thanks for any suggestions and ideas. -

7 6

Re: Mail account brute force / harassment
by Odhiambo Washington 11 Apr '19

11 Apr '19

All your approaches are not well thought out. The best solutions are always the simplest ones. KISS principle dictates so. On Thu, 11 Apr 2019 at 15:01, Marc Roos <M.Roos(a)f1-outsourcing.eu> wrote: > > How long have we been using the current strategy? Do we have less or > more abuse clouds operating? > > "Let the others bother with their own problems." is a bit narrow minded > view. If every one on this mailing list would have this attitude, there > would be no single answer to your question. > > > -----Original Message----- > From: Odhiambo Washington [mailto:odhiambo@gmail.com] > Sent: donderdag 11 april 2019 12:54 > To: Marc Roos > Cc: dovecot > Subject: Re: Mail account brute force / harassment > > Marc, > > There is a strategy loosely referred to as "choose your battles well" > :-) > If you can, hack the server and dump the 500GB - you'll be using > resources transferring the 500GB as the other server receives it. Two > servers wasting resources because you think you are punishing an > offender! > > > On Thu, 11 Apr 2019 at 13:43, wrote: > > > Please do not assume anything other than what is written, it is a > hypothetical situation > > > A. With the fail2ban solution > - you 'solve' that the current ip is not able to access you > - it will continue bothering other servers and admins > - you get the next abuse host to give a try. > > B. With 500GB dump > - the owner of the attacking server (probably hacked) will notice > it > will be forced to take action. > > > If abuse clouds are smart (most are) they would notice that > attacking my > servers, will result in the loss of abuse nodes, hence they will > not > bother me anymore. > > If every one would apply strategy B, the abuse problem would get > less. > Don't you agree?? > > > > > > > -----Original Message----- > From: Odhiambo Washington > Sent: donderdag 11 april 2019 12:28 > To: Marc Roos > Cc: dovecot > Subject: Re: Mail account brute force / harassment > > > > On Thu, 11 Apr 2019 at 13:24, Marc Roos via dovecot > <dovecot(a)dovecot.org> wrote: > > > > > Say for instance you have some one trying to constantly > access an > account > > > Has any of you made something creative like this: > > * configure that account to allow to login with any > password > * link that account to something like /dev/zero that > generates > infinite > amount of messages > (maybe send an archive of virusses?) > * transferring TB's of data to this harassing client. > > I think it would be interesting to be able to do such a > thing. > > > > > Instead of being evil, just use fail2ban to address this problem > :-) > > -- > > Best regards, > Odhiambo WASHINGTON, > Nairobi,KE > +254 7 3200 0004/+254 7 2274 3223 > "Oh, the cruft.", grep ^[^#] :-) > > > > > > > -- > > Best regards, > Odhiambo WASHINGTON, > Nairobi,KE > +254 7 3200 0004/+254 7 2274 3223 > "Oh, the cruft.", grep ^[^#] :-) > > > -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 "Oh, the cruft.", grep ^[^#] :-)

1 0

Re: Mail account brute force / harassment
by Odhiambo Washington 11 Apr '19

11 Apr '19

Marc, There is a strategy loosely referred to as "choose your battles well" :-) Let the others bother with their own problems. If you can, hack the server and dump the 500GB - you'll be using resources transferring the 500GB as the other server receives it. Two servers wasting resources because you think you are punishing an offender! On Thu, 11 Apr 2019 at 13:43, Marc Roos <M.Roos(a)f1-outsourcing.eu> wrote: > Please do not assume anything other than what is written, it is a > hypothetical situation > > > A. With the fail2ban solution > - you 'solve' that the current ip is not able to access you > - it will continue bothering other servers and admins > - you get the next abuse host to give a try. > > B. With 500GB dump > - the owner of the attacking server (probably hacked) will notice it > will be forced to take action. > > > If abuse clouds are smart (most are) they would notice that attacking my > servers, will result in the loss of abuse nodes, hence they will not > bother me anymore. > > If every one would apply strategy B, the abuse problem would get less. > Don't you agree?? > > > > > > > -----Original Message----- > From: Odhiambo Washington > Sent: donderdag 11 april 2019 12:28 > To: Marc Roos > Cc: dovecot > Subject: Re: Mail account brute force / harassment > > > > On Thu, 11 Apr 2019 at 13:24, Marc Roos via dovecot > <dovecot(a)dovecot.org> wrote: > > > > > Say for instance you have some one trying to constantly access an > account > > > Has any of you made something creative like this: > > * configure that account to allow to login with any password > * link that account to something like /dev/zero that generates > infinite > amount of messages > (maybe send an archive of virusses?) > * transferring TB's of data to this harassing client. > > I think it would be interesting to be able to do such a thing. > > > > > Instead of being evil, just use fail2ban to address this problem :-) > > -- > > Best regards, > Odhiambo WASHINGTON, > Nairobi,KE > +254 7 3200 0004/+254 7 2274 3223 > "Oh, the cruft.", grep ^[^#] :-) > > > -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254 7 3200 0004/+254 7 2274 3223 "Oh, the cruft.", grep ^[^#] :-)

2 1

Re: Lua Push Notification Plugin
by Sami Ketola 11 Apr '19

11 Apr '19

Hi, doveadm mailbox metadata get -u victim INBOX /private/vendor/vendor.dovecot/pvt/server/vendor/vendor.dovecot/http-notify or doveadm mailbox metadata set if you are not using appsuite as your mail frontend then you need to set the metadata manually or make sure that your mail frontend does set it. Sami > On 11 Apr 2019, at 11.50, Pabsky <j0hnw0rk3r(a)gmail.com> wrote: > > Sami, > > the package 'appsuite' is not mentioned in the documentation, also I already enabled imap metadata. > > What do you mean by 'It's not supposed to be a file. It's supposed to be a attribute on the users INBOX'? > > I'm attaching my dovecot configuration file for you to examine. Thanks Sami! > > On 11/04/2019 4:37 PM, Sami Ketola wrote: >> >> >>> On 11 Apr 2019, at 11.00, Pabsky via dovecot <dovecot(a)dovecot.org <mailto:dovecot@dovecot.org>> wrote: >>> >>> Thanks AKI! I'm a step closer to achieving my goals. >>> >>> However, I'm getting a new error as indicated from below: >>> >>> Apr 11 01:45:34 lmtp(user(a)mydomain.com <mailto:user@mydomain.com>)<20801><pVlIEJ7wrlxBUQAAUdwEFQ>: Debug: push-notification-ox: Skipped because not active (/private/vendor/vendor.dovecot/pvt/server/vendor/vendor.dovecot/http-notify METADATA not set) >>> Apr 11 01:45:34 lmtp(user(a)mydomain.com <mailto:user@mydomain.com>)<20801><pVlIEJ7wrlxBUQAAUdwEFQ>: Debug: push-notification: Push notification transaction completed >>> >>> By the way, the file /private/vendor/vendor.dovecot/pvt/server/vendor/vendor.dovecot/http-notify does not exist on my server. >> >> It's not supposed to be a file. It's supposed to be a attribute on the users INBOX. Also you need to enable imap metadata or appsuite can't set the attribute. >> >> Sami >> >> > <dovecot.conf>

1 0

Passord change problem. (INTERNAL)
by Arvid.Eikas＠telenor.com 11 Apr '19

11 Apr '19

Hi, We have a strange problem with login after password change. We need to kill the auth_worker processes to activate the new password. It doesn't work with SIGHUP on pid, it doesn't help to run "doveadm auth cache flush". It runs flush xx but the new password still doesn't work. Are there any suggestions for how this can be resolved? Our release is 2.3.5. Arvid

1 0

Re: Lua Push Notification Plugin
by Pabsky 11 Apr '19

11 Apr '19

Thanks AKI! I'm a step closer to achieving my goals. However, I'm getting a new error as indicated from below: Apr 11 01:45:34 lmtp(user(a)mydomain.com)<20801><pVlIEJ7wrlxBUQAAUdwEFQ>:*Debug: push-notification-ox: Skipped because not active (/private/vendor/vendor.dovecot/pvt/server/vendor/vendor.dovecot/http-notify METADATA not set)* Apr 11 01:45:34 lmtp(user(a)mydomain.com)<20801><pVlIEJ7wrlxBUQAAUdwEFQ>:*Debug: push-notification: Push notification transaction completed *By the way, the file****/private/vendor/vendor.dovecot/pvt/server/vendor/vendor.dovecot/http-notify* *does not exist on my server. Again, I appreciate the help :) ** > On 11 April 2019 07:57 Robust Coding via dovecot <dovecot(a)dovecot.org> wrote: > > > Hi Admin, > > I hope you consider reading and addressing my concern promptly. > > For the past few days I've been setting up a VPS with cPanel and WHM > pre-installed on Bluehost. I want to enable push notification plugin in > Dovecot2.3.5. I tried OX and Lua plugins and got errors. > > For using OX plugin: > push_notification_driver = ox:url=http://staging.mydomain.com/mail-notify/v1 > user_from_metadata > And got this error on runtime: > Error: push-notification-ox: Skipped because unable to get attribute: Mailbox > attributes not enabled > mail_attribute_dict = file:%h/Maildir/dovecot-attributes > When using Lua: > mail_plugins = $mail_plugins mail_lua notify push_notification > push_notification_lua > > plugin { > push_notification_driver = lua:file=/path/to/lua/push.lua > } > And got this order: > Plugin 'push_notification_lua' not found from directory /usr/lib64/dovecot > You do not have push_notification_lua installed. > I think I'm missing something here but I can't figure it out. Please HELP! > > Sincerely, > John Lopena > > -- > > "Become a programmer - Lose your brain's virginity" Aki

3 2