- dovecot - dovecot.org

FW: Unable to create needed folders
by Ken Zachreson 15 Mar '17

15 Mar '17

Never mind, I am stupid and did not read all available information. Needed to change permissions on /var/mail/* Thank You, Ken Z -----Original Message----- From: Ken Zachreson Sent: Wednesday, March 15, 2017 10:28 AM To: 'dovecot(a)dovecot.org' <dovecot(a)dovecot.org> Subject: Unable to create needed folders Greetings, The log reports that a process cannot create the needed folders. Please review and tell me what I have done wrong. dovecot 2.0.9 # 2.0.9: /etc/dovecot/dovecot.conf doveconf: Warning: NOTE: You can get a new clean config file with: doveconf -n > dovecot-new.conf doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:85: protocol { ssl_listen } has been replaced by service { inet_listener { address } } # OS: Linux 2.6.32-642.15.1.el6.x86_64 x86_64 CentOS release 6.8 (Final) auth_mechanisms = plain login last_valid_gid = 520 last_valid_uid = 520 mail_location = mbox:~/mail/:INBOX=/var/mail/%u mbox_write_locks = fcntl passdb { args = dovecot driver = pam } protocols = imap service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service imap-login { inet_listener imaps { address = * } } service pop3-login { inet_listener pop3s { address = * } } ssl_ca = /etc/pki/tls/certs/gd_bundle-g2-g1.crt ssl_cert = </etc/pki/tls/certs/c1e209e3ca2e1e5.crt ssl_key = </etc/pki/tls/private/gcrcnet.key userdb { driver = passwd } protocol pop3 { pop3_uidl_format = %08Xv%08Xu } ERROR Message from log Mar 15 10:14:03 MultiTronic6 dovecot: imap-login: Login: user=<wifi.adm>, method=LOGIN, rip=xx.xx.xx.xx, lip=yy.yy.yy.yy, mpid=5973, TLS Mar 15 10:14:03 MultiTronic6 dovecot: imap(wifi.adm): Error: chown(/home/wifi.adm/mail/.imap/INBOX, -1, 12(mail)) failed: Operation not permitted (egid=504(wifi.adm), group based on /var/mail/wifi.adm) Mar 15 10:14:03 MultiTronic6 dovecot: imap(wifi.adm): Error: mkdir(/home/wifi.adm/mail/.imap/INBOX) failed: Operation not permitted Mar 15 10:14:03 MultiTronic6 dovecot: imap(wifi.adm): Connection closed bytes=39/423 Thank You, Ken Zachreson IT Manager, Grand Canyon Resort Corp 928-769-2629 928-769-2638 Help Desk

1 0

Unable to create needed folders
by Ken Zachreson 15 Mar '17

15 Mar '17

Greetings, The log reports that a process cannot create the needed folders. Please review and tell me what I have done wrong. dovecot 2.0.9 # 2.0.9: /etc/dovecot/dovecot.conf doveconf: Warning: NOTE: You can get a new clean config file with: doveconf -n > dovecot-new.conf doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:85: protocol { ssl_listen } has been replaced by service { inet_listener { address } } # OS: Linux 2.6.32-642.15.1.el6.x86_64 x86_64 CentOS release 6.8 (Final) auth_mechanisms = plain login last_valid_gid = 520 last_valid_uid = 520 mail_location = mbox:~/mail/:INBOX=/var/mail/%u mbox_write_locks = fcntl passdb { args = dovecot driver = pam } protocols = imap service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service imap-login { inet_listener imaps { address = * } } service pop3-login { inet_listener pop3s { address = * } } ssl_ca = /etc/pki/tls/certs/gd_bundle-g2-g1.crt ssl_cert = </etc/pki/tls/certs/c1e209e3ca2e1e5.crt ssl_key = </etc/pki/tls/private/gcrcnet.key userdb { driver = passwd } protocol pop3 { pop3_uidl_format = %08Xv%08Xu } ERROR Message from log Mar 15 10:14:03 MultiTronic6 dovecot: imap-login: Login: user=<wifi.adm>, method=LOGIN, rip=xx.xx.xx.xx, lip=yy.yy.yy.yy, mpid=5973, TLS Mar 15 10:14:03 MultiTronic6 dovecot: imap(wifi.adm): Error: chown(/home/wifi.adm/mail/.imap/INBOX, -1, 12(mail)) failed: Operation not permitted (egid=504(wifi.adm), group based on /var/mail/wifi.adm) Mar 15 10:14:03 MultiTronic6 dovecot: imap(wifi.adm): Error: mkdir(/home/wifi.adm/mail/.imap/INBOX) failed: Operation not permitted Mar 15 10:14:03 MultiTronic6 dovecot: imap(wifi.adm): Connection closed bytes=39/423 Thank You, Ken Zachreson IT Manager, Grand Canyon Resort Corp 928-769-2629 928-769-2638 Help Desk

1 0

autocreate ONLY for new Users
by plataleas 15 Mar '17

15 Mar '17

Hi All We are currently migrating accounts to Dovecot. The existing accounts do have special folders with different names. (i.e. sent, sent-mail) The autocreate-function of "special folders" is useful. However we need this feature ONLY for new users. The existing accounts have a mapping for their own "special folders". There are discussions about this topic on the mailing list: /http://www.dovecot.org/list/dovecot/2014-August/097313.html https://dovecot.org/list/dovecot/2016-May/104296.html/ Did someone manage to implement this ? Are there workarounds? Thanks and regards plataleas

3 6

Custom cache_key for passdb-sql
by Tom Sommer 15 Mar '17

15 Mar '17

The cache_key for the SQL-passdb should be created automatically, but for some reason the service (%s) is not part of the key, and I need it to be I've tried to set a manual cache_key, but that fails: Mar 15 11:54:02 auth: Fatal: sql /etc/dovecot/dovecot-sql.conf cache_key=%s%u%{real_ip}: Can't open configuration file /etc/dovecot/dovecot-sql.conf cache_key=%s%u%{real_ip}: No such file or directory passdb { args = /etc/dovecot/dovecot-sql.conf cache_key=%s%u%{real_ip} driver = sql } Is this not possible? -- Tom

1 0

welcome plugin
by David Mehler 14 Mar '17

14 Mar '17

Hello, If anyone is using the welcome plugin in dovecot 2.2.x to sent a one-time new welcome email to new users can I get a look at your configuration? I'm stuck, I create a user and the welcome action does not execute. If you've got a script to send the mail can I get a look at that as well? Thanks. Dave.

3 2

Users with extra mailbox: namespace/mailbox in userdb lookup?
by MRob 14 Mar '17

14 Mar '17

Hello, We have a need for some users to have an additional folder created and subscribed for them. Is is possible to return an override for the default "namespace inbox" containing the needed mailbox definitions in the userdb lookup for such users? If so, how would the userdb lookup result be formatted? Presumably as just one long string, but how would the setting be named given there can't be a space in it? Can I replace the space with an underscore, e.g. userdb_namespace_inbox = '{ mailbox Drafts { auto=subscribe special_use = \Drafts } mailbox Trash { auto=subscribe special_use = \Trash } }' Or is there some other way to do this?

4 11

strange behaviour of dovecot
by Masaharu Kawada 14 Mar '17

14 Mar '17

Dear dovecot-list, Dovecot gives the below error messages and those errors go away after running 'systemctl restart dovecot'(Restarting dovecot service)', however, the same happens after a while later(like after 300 mails delivered). --- master : Error : service(anvil) : Initial Status notification no received in 30 seconds, killing the process master : Error : service(log) : Initial Status notification no received in 30 seconds, killing the process master : Error : service(ssl-params) : Initial Status notification no received in 30 seconds, killing the process master : Error : service(log) : child 3703 killed with signal 9 --- then the log process is not there so that no mail log gets captured in maillog: --- root 28036 0.0 0.0 19864 1604 ? Ss 11:45 0:00 /usr/sbin/dovecot -F dovecot 28074 0.0 0.0 9312 1000 ? S 11:46 0:00 dovecot/anvil root 28075 0.0 0.0 12324 2084 ? S 11:46 0:00 dovecot/config --- Does this have something to do with any limitation in dovecot configuration? If anyone in the list ever has similar or same experience, please give me a clue that shows where to look at from here. Thanks, -- Masaharu Kawada

2 2

Solr 6.4.2
by Daniel Miller 14 Mar '17

14 Mar '17

For those trying Solr - version 6.4.2 fixed a number of bugs in the 6.4.x series. Speed is incredible. If you haven't tried it - I strongly recommend it! And, using the included installation script (with Solr) combined with my schema - installation was painless. I'm now running in single core mode without issues (running in cloud mode with a single core seemed silly anyway). -- Daniel

1 0

Re: First time setting up Director Woes
by Jesse C. Smillie 13 Mar '17

13 Mar '17

Working again. Explains a lot actually. Inital box I was experimenting on PAM was already setup and had worked. That error I got caught up in was with SSSD and PAM wasn't working. Fixing the error shot myself in the foot in other ways. Thank you! -Jesse C. Smillie On 3/13/17 4:38 PM, Aki Tuomi wrote: >> On March 13, 2017 at 10:21 PM "Jesse C. Smillie" <jsmillie(a)gatewayk12.org> wrote: >> >> >> I'm trying to setup our first director server. Trying to keep the >> initial config simple really as just maybe a proof of concept and its >> got me pulling my hair out today. Initially I just tried to convert one >> of my already running IMAP servers to be a director just to see if I >> could do it. I modified the configs as it appeared they needed based on: >> >> https://wiki2.dovecot.org/Director >> http://wiki2.dovecot.org/PasswordDatabase/ExtraFields/Proxy >> >> But it didn't work. Kept serving files locally instead of proxing off >> to the servers listed. > Remove this: > >> passdb { >> driver = pam >> } > Aki

1 0

First time setting up Director Woes
by Jesse C. Smillie 13 Mar '17

13 Mar '17

I'm trying to setup our first director server. Trying to keep the initial config simple really as just maybe a proof of concept and its got me pulling my hair out today. Initially I just tried to convert one of my already running IMAP servers to be a director just to see if I could do it. I modified the configs as it appeared they needed based on: https://wiki2.dovecot.org/Director http://wiki2.dovecot.org/PasswordDatabase/ExtraFields/Proxy But it didn't work. Kept serving files locally instead of proxing off to the servers listed. -----------------------------------------------------------------------------------------------==== Mar 13 15:58:27 fugitoid dovecot: imap-login: Login: user=<makaveli>, method=PLAIN, rip=10.0.15.114, lip=10.1.12.221, mpid=3022, TLS, session=<YCCCIqJKmMIKAA9y> Mar 13 15:58:27 fugitoid dovecot: imap(makaveli): Error: User initialization failed: Namespace '': mkdir(/home/makaveli/Maildir) failed: Permission denied (euid=2605(makaveli) egid=1100(<unknown>) missing +w perm: /home, dir owned by 0:0 mode=0755) Mar 13 15:58:27 fugitoid dovecot: imap: Error: Invalid user settings. Refer to server log for more information. Thinking it was just something with that box (still running Dovecot 2.2.10 as well) I moved on to setup a new Centos7 server and go through the setup again and initially it was working for a few hours. -----------------------------------------------------------------------------------------------==== Mar 13 12:19:03 fugitoid dovecot: imap-login: proxy(makaveli): started proxying to 10.1.12.228:993: user=<makaveli>, method=PLAIN, rip=10.0.15.114, lip=10.1.12.221, TLS, session=<CzfaEZ9KXgAKAA9y> Then at some point I got side tracked by a pam error message and when I came back from working that out Dovecot was trying to authenticate users locally again. I really feel like I'm missing something here, but for the life of me I can't figure it out. Any ideas would be welcome. Thanks. # 2.2.28 (bed8434): /etc/dovecot/dovecot.conf # OS: Linux 3.10.0-514.10.2.el7.x86_64 x86_64 CentOS Linux release 7.3.1611 (Core) auth_mechanisms = plain login default_client_limit = 1024 director_mail_servers = 10.1.12.229 10.1.12.228 10.1.12.225 director_servers = 10.1.12.221:9090 mail_fsync = always mail_nfs_storage = yes mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } passdb { args = proxy=y nopassword=y ssl=any-cert driver = static } protocols = imap service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { port = 9090 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service imap-login { executable = imap-login director inet_listener imaps { port = 993 ssl = yes } } ssl = required ssl_ca = </etc/GoDaddy_SSL/gd_bundle.crt ssl_cert = </etc/GoDaddy_SSL/gatewayk12.cert ssl_cipher_list = ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA ssl_dh_parameters_length = 2048 ssl_key = # hidden, use -P to show it ssl_protocols = TLSv1 TLSv1.1 TLSv1.2 userdb { driver = passwd }

2 1