- dovecot - dovecot.org

[Dovecot] mixing 1.2 and 2.0?
by Cor Bosman 31 Aug '10

31 Aug '10

Hi all, anyone know if it's safe to mix a 1.2 environment with 2.0 servers? Im planning on adding some 2.0 servers for test purposes, but now im wondering if thats going to mess up index files or other files for users selecting the test server and then switching back to our normal servers. Regards, Cor

2 1

Re: [Dovecot] dovecot - mac firewall problem
by Patrick Fay 31 Aug '10

31 Aug '10

Hi, Thanks everyone for your help and input. I think perhaps my attempt to be brief and focused in posing my question has led to some confusion about my needs and configuration. I do not have the luxury of being able to segregate the server (postfix and dovecot) from client (GUI, etc) on different machines. I am, as Charles' surmised, using this to aggregate disparate mail streams into a single location, and using dovecot to serve it. Since I must run client-ish applications on this machine, the application firewall is desirable. The anticipated load on this system from the server side is quite light, so the throughput overhead incurred by the application firewall is negligible. The problem appears to be that--for some reason--dovecot identifies itself incorrectly to the application firewall, resulting in the garbage shown in the logs and failure to permit this connection (the firewall is configured to explicitly permit connections for dovecot). I note that other daemons (e.g. postfix, sshd, etc) do not exhibit this defect; the firewall works as expected for every other service I've tried except dovecot. The logs for the firewall appear as: Aug 26 20:43:45 hostname Firewall[55]: Deny ^L connecting from XX.XX.XX.XX:37310 uid = 0 proto=6 Aug 26 20:43:53 hostname Firewall[55]: Deny ^H?^U???^Z connecting from XX.XX.XX.XX:37310 uid = 0 proto=6 Both of these are dovecot hits--but the name is different each time. Also the ?'s aren't really "?" marks; they're trans-ascii characters with high bits set that my mailer doesn't like very much. It really looks like a misdirected pointer or something somewhere, but I'm not familiar enough with the codebase to know where to start looking, or if in fact it is something else that is misconfigured. Any thoughts on how to resolve this? Patrick

3 2

[Dovecot] getdents() with 4KB buffer - seems slow (Maildir, large inbox)
by Marinos Yannikos 31 Aug '10

31 Aug '10

Hi, I have a very large inbox (~146K mails) in Maildir format and dovecot seems to spend a lot of time rescanning the directory, especially when the server is loaded. I'm not sure whether this is triggered by Thunderbird or done regularly, but it takes longer when the server is loaded, so sometimes it seems that it is scanning continuously. Since it takes around 2000 getdents64() syscalls to scan my inbox, I'm wondering whether the buffer size is a bit small with 4KB and might benefit from being configurable: ... getdents64(8, /* 73 entries */, 4096) = 4088 getdents64(8, /* 73 entries */, 4096) = 4088 getdents64(8, /* 73 entries */, 4096) = 4088 getdents64(8, /* 73 entries */, 4096) = 4088 getdents64(8, /* 73 entries */, 4096) = 4088 ... (strace output of an imap process belonging to me) The behaviour is identical on 1.0.15 and 1.2.13 (I just upgraded). Regards, Marinos PS. I know that the main reason for slowness is my large inbox and the server being loaded (disk I/O), but still, so many syscalls just to rescan the inbox seems wasteful. # dovecot -n # 1.2.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-6-xen-686 i686 Debian 4.0 log_timestamp: %Y-%m-%d %H:%M:%S ssl_listen: * ssl_cert_file: XXXXX (censored) ssl_key_file: XXXXX login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login login_process_size: 32 login_processes_count: 8 verbose_proctitle: yes mail_privileged_group: mail mail_location: maildir:~/Maildir mbox_write_locks: fcntl dotlock mail_process_size: 2048 imap_client_workarounds: outlook-idle auth default: passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix

2 1

[Dovecot] Mail error in log
by Ian macdonald 31 Aug '10

31 Aug '10

Hi All, I am getting the following in the mail error log deliver(julie): safe_mkstemp(/home/julie/.temp.geomail.10443.) failed: Permission denied This is correct julie does not have access to write to her home directory Julie is a system user who is chrooted so her home is owned by root, this is for when she logs in via sftp to retrieve files she can only access folders below her home. I am using Maildir and julie does have access to ~Maildir, is there any reason why deliver is attempting to use her user directory and not her Maildir? Cheers Ian

3 3

[Dovecot] istream_read like zlib, but without zlib
by Alex Baule 31 Aug '10

31 Aug '10

Hy Timo ! I Made some modification in stream_read in zlib. I remove all zlib part, because i don't need this, but i need to read a istream to change it. Well, i create a size_t called supersize, with is a substitute for stream->zs.avail_in. The trouble is, my debug file have a lot of "READ Plugin\n", and i think it's because my read becomes a loop, i think it's because i don't know to identify the EOF from the istream. you can help me to identify the EOF and set it ? Tks .!!! static ssize_t i_stream_emx_read(struct istream_private *stream) { struct emx_istream *emxstream = (struct emx_istream *)stream; const unsigned char *data; uoff_t high_offset; size_t size; int ret; fprintf(emxstream->debug,"READ Plugin\n"); fflush(emxstream->debug); high_offset = stream->istream.v_offset + (stream->pos - stream->skip); if (emxstream->eof_offset == high_offset) { i_assert(emxstream->high_pos == 0); stream->istream.eof = TRUE; return -1; } if (stream->pos < emxstream->high_pos) { /* we're here because we seeked back within the read buffer. */ ret = emxstream->high_pos - stream->pos; stream->pos = emxstream->high_pos; emxstream->high_pos = 0; return ret; } emxstream->high_pos = 0; if (stream->pos + CHUNK_SIZE > stream->buffer_size) { /* try to keep at least CHUNK_SIZE available */ if (!emxstream->marked && stream->skip > 0) { /* don't try to keep anything cached if we don't have a seek mark. */ i_stream_compress(stream); } if (stream->max_buffer_size == 0 || stream->buffer_size < stream->max_buffer_size) i_stream_grow_buffer(stream, CHUNK_SIZE); if (stream->pos == stream->buffer_size) { if (stream->skip > 0) { /* lose our buffer cache */ i_stream_compress(stream); } if (stream->pos == stream->buffer_size) return -2; /* buffer full */ } } if(emxstream->supersize == 0){ /* need to read more data. try to read a full CHUNK_SIZE */ i_stream_skip(stream->parent, emxstream->prev_size); if (i_stream_read_data(stream->parent, &data, &size, CHUNK_SIZE-1) == -1 && size == 0) { if (stream->parent->stream_errno != 0) { stream->istream.stream_errno = stream->parent->stream_errno; } else { i_assert(stream->parent->eof); stream->istream.stream_errno = EPIPE; } return -1; } emxstream->prev_size = size; if (size == 0) { /* no more input */ stream->istream.eof = TRUE; i_assert(!stream->istream.blocking); return 0; } fprintf(emxstream->debug,"READ =|%s|= Plugin\n",data); fflush(emxstream->debug); memcpy(stream->w_buffer + stream->pos, data,size); emxstream->supersize = size; } size = stream->buffer_size - stream->pos; stream->pos += size; if(stream->istream.eof == TRUE){ emxstream->eof_offset = stream->istream.v_offset + stream->pos; i_stream_skip(stream->parent, emxstream->prev_size - emxstream->supersize); emxstream->supersize = 0; emxstream->prev_size = 0; } if (size == 0) { /* read more input */ return i_stream_emx_read(stream); } return size; }

1 0

Re: [Dovecot] fetchmail wakeup
by Amon Ott 31 Aug '10

31 Aug '10

On Tuesday 31 August 2010 wrote Peter Dungel: > Does someone know, if in the new release of dovecot 2.x.x there is a > feature implemented, that wakes fetchmail or any other program on a client > request, or is the "fetchmail wakeup" plugin still the only way to do this > (at least I've not found any other, and that plugin never worked for me),.. You could replace the imap or pop3 helper program with a wrapper that first sends the fetchmail daemon a wakeup signal, waits a few secs and then calls the original. Amon Ott -- Dr. Amon Ott - m-privacy GmbH Am Köllnischen Park 1, 10179 Berlin Tel: +49 30 24342334 Fax: +49 30 24342336 Web: http://www.m-privacy.de Handelsregister: Amtsgericht Charlottenburg HRB 84946 Geschäftsführer: Dipl.-Kfm. Holger Maczkowsky, Roman Maczkowsky GnuPG-Key-ID: EA898571

1 0

[Dovecot] fetchmail wakeup
by Peter Dungel 31 Aug '10

31 Aug '10

Does someone know, if in the new release of dovecot 2.x.x there is a feature implemented, that wakes fetchmail or any other program on a client request, or is the "fetchmail wakeup" plugin still the only way to do this (at least I've not found any other, and that plugin never worked for me),.. Yours Peter

1 0

[Dovecot] Wrong MySQL sintax, I can't login
by Pablo 31 Aug '10

31 Aug '10

Hi guys: I can't login as a user: The output of mail.log: Aug 31 08:39:45 socrates dovecot: auth(default): client in: AUTH^I1^IPLAIN^Iservice=imap^Ilip=178.63.82.247^Irip=81.39.27.227^Ilport=143^Irport=33715^Iresp=AHBhYmxvLnJvZHJpZ3VlekBlc2N1ZWxhc3VwZXJpb3JkZWNvYWNoaW5nLmNvbQBwZXJpa2l0YS4= Aug 31 08:39:45 socrates dovecot: auth-worker(default): sql(pablo.rodriguez(a)escuelasuperiordecoaching.com,81.39.27.227): query: SELECT password FROM mailbox WHERE username = 'pablo.rodriguez(a)escuelasuperiordecoaching.com' Aug 31 08:39:45 socrates dovecot: auth(default): client out: OK^I1^Iuser=pablo.rodriguez(a)escuelasuperiordecoaching.com Aug 31 08:39:45 socrates dovecot: auth(default): master in: REQUEST^I65^I16796^I1 Aug 31 08:39:45 socrates dovecot: auth-worker(default): sql(pablo.rodriguez(a)escuelasuperiordecoaching.com,81.39.27.227): SELECT maildir, 1001 AS uid, 1001 AS gid FROM mailbox WHERE username = 'pablo.rodriguez(a)escuelasuperiordecoaching.com Aug 31 08:39:45 socrates dovecot: auth-worker(default): sql(pablo.rodriguez(a)escuelasuperiordecoaching.com,81.39.27.227): User query failed: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ''pablo.rodriguez(a)escuelasuperiordecoaching.com' at line 1 Aug 31 08:39:45 socrates dovecot: auth(default): master out: FAIL^I65 Aug 31 08:39:45 socrates dovecot: imap-login: Internal login failure (auth failed, 1 attempts): user=<pablo.rodriguez(a)escuelasuperiordecoaching.com>, method=PLAIN, rip=81.39.27.227, lip=178.63.82.247 My Dovecot version: 1.2.9 My Dovecot configuration: # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-23-server x86_64 Ubuntu 10.04.1 LTS reiserfs log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/mail/dovecot.crt ssl_key_file: /etc/ssl/mail/dovecot.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_location: maildir:/home/vmail/%u/ mail_debug: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: mechanisms: plain login verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail My Dovecot MySQL configuration: driver=mysql connect = host=localhost dbname=postfix user=postfix password=xxxxxx default_pass_scheme = CRYPT password_query = SELECT password FROM mailbox WHERE username = '%u' user_query = SELECT maildir, 1001 AS uid, 1001 AS gid FROM mailbox WHERE username = '%u Can anyone help me? I've seen that log told me "wrong syntax", but I think upper query is right, isn't it? Any hint? Thanks in advance :-)

2 2

[Dovecot] Combining ManageSieve with hand-written scripts
by Jason Bleazard 30 Aug '10

30 Aug '10

Hi, new to Dovecot, forgive me if I'm missing something basic... I'm trying to figure out if there's a way to use a couple of custom rules alongside ManageSieve. Most of the time I like the ManageSieve interface in Roundcube, but there's one rule that I can't get it to do the way I want (it's a notify rule, and I don't like the way Roundcube constructs the notify). I figured out how to write it by hand, but of course I can't put my own rules in Roundcube's file or it gets really confused. I tried adding an include to the generated file, but Roundcube politely removes it for me the next time I use the rule editor. (Squirrelmail doesn't seem to be any better in this regard.) I thought I could do something like sieve_before = ~/sieve/custom.sieve but that doesn't seem to work. I couldn't even see any evidence in the log that it attempted to look at that file. Apparently sieve_before isn't meant to work on a per-user basis. If I do a global sieve_before, can I have it "include :personal"? If so, what's going to happen with the script compilation? From what I understand, it can't be compiled globally, since each user has a different custom rule set. Am I trying to do the impossible here? Thanks for any ideas, Jason Bleazard

2 2

[Dovecot] Different IPs should use different ssl-certs/keys
by Peer Heinlein 30 Aug '10

30 Aug '10

I don't understand how to use multiple keys/certs on different IPs without SNI. http://wiki2.dovecot.org/SSL/DovecotConfiguration explains how to use different keys for different protocols like POP3 and IMAP. But how to bind those keys/ on IPs/Ports? Looks like it is not possible to use ssl_cert inside service { inet_listener {} } Is it still necessary to run multiple instances like it was in Dovecot 1.2.x? Peer -- Heinlein Professional Linux Support GmbH Linux: Akademie - Support - Hosting http://www.heinlein-support.de Tel: 030 / 40 50 51 - 0 Fax: 030 / 40 50 51 - 19 Zwangsangaben lt. §35a GmbHG: HRB 93818 B / Amtsgericht Berlin-Charlottenburg, Geschäftsführer: Peer Heinlein -- Sitz: Berlin

2 1

[Dovecot] Dovecot dict process privileges
by Mike Mimic 30 Aug '10

30 Aug '10

Hi! Is it possible to configure Dovecot so that it drops privileges for dict process? Currently this process is running as root. (At least on my system with Dovecot 1.2.) Best regards Mike

3 8

Re: [Dovecot] dovecot - mac firewall problem
by Patrick Fay 30 Aug '10

30 Aug '10

> On 8/29/2010 8:51 PM, Patrick Fay wrote: >> Aug 26 20:43:45 hostname Firewall[55]: Deny ^L connecting from XX.XX.XX.XX:37310 uid = 0 proto=6 >> Aug 26 20:43:53 hostname Firewall[55]: Deny ^H?^U???^Z connecting from XX.XX.XX.XX:37310 uid = 0 proto=6 >> >> Both of these are dovecot hits--but the name is different each time. >> Also the ?'s aren't really "?" marks; they're trans-ascii characters >> with high bits set that my mailer doesn't like very much. It really >> looks like a misdirected pointer or something somewhere, but I'm not >> familiar enough with the codebase to know where to start looking, or >> if in fact it is something else that is misconfigured. Any thoughts >> on how to resolve this? > > Dovecot version? > > -- > > Best regards, > > Charles > My apologies-- dovecot version 1.2.11. Patrick

2 1

Re: [Dovecot] doveadm expunge -A mailbox Trash savedbefore 30d
by Jerrale G 30 Aug '10

30 Aug '10

Could you explain the iterate_query in any kind of sql. I'm guessing to just use the query, correctly, that's failing as iterate_query= and put it in the service auth file which includes password_query and user_query. then, I'm guessing to add something like: iteratedb { driver = sql args = /path/to/sql.conf } The wiki2 only says: "When the SQL userdb module is used make sure that the iterate_query setting in /etc/dovecot/dovecot-sql.conf.ext matches your database layout." it should give an example query. I don't know if its wanting to list the fields or the contents of a field. Thanks, Jerrale G Jerrale G. SC Senior Admin

1 0

[Dovecot] Can't get dovecot to see email folders
by Blaster 30 Aug '10

30 Aug '10

So I'm very frustrated, I've spent the better part of a day trying to get dovecot 2.0.1 working...Most of the documentation on the Wiki seems to think you are running an older version and therefore very little of it applies. I'm running 2.0.1 on OpenSolaris. I seem to have 2 remaining issues: 1) Dovecot is not able to determine the home directory 2) IMAP clients can not get to the mail folder directory. One client is reporting that it can't open it in read only mode. 3) I tried to get raw logging working, but apparently I couldn't because of #1. The architecture of Dovecot makes it difficult to transition from another IMAP server. If I force the MBOX to be /home/%u/mail, all of my clients think the folders are in /home/%u/mail/mail. If I set mbox location to /home/%u, then dovecot tries to create .subscription and .imap files/directories in the users home dir which it doesn't have permission to do. It would be nice if you could configure Dovecot in such a way as to make transition easier, such as the ability to strip off a duplicate trailing path, ie /home/%u/mail/mail becomes /home/%u/mail....Otherwise this necessitates visiting countless IMAP clients for reconfiguration... Here is my config file: /opt/sbin/dovecot -n # 2.0.1: /opt/etc/dovecot/dovecot.conf # OS: SunOS 5.11 i86pc base_dir = /var/run/dovecot/ mail_debug = yes mail_gid = mail mail_location = mbox:/home/%u/mail:INBOX=/var/mail/%u mail_privileged_group = mail mail_uid = dovecot passdb { driver = pam } plugin { home = /home/%u } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { address = * port = 993 } } service pop3-login { inet_listener pop3 { address = * port = 0 } inet_listener pop3s { address = * port = 0 } } ssl_cert = </usr/local/ssl/certs/dovecot.pem ssl_key = </usr/local/ssl/private/dovecot.pem gremlin [/opt/bin] # gremlin [/opt/bin] #

4 9

[Dovecot] PAM authentication fails
by Egbert Jan van den Bussche 29 Aug '10

29 Aug '10

Hi, I'm fighting all weekend on with auth and pam to authenticate local system users. testuser is such local user and is in passwd and shadow. I want to have local system users (testuser is one of them) and virtual users. The virtual part works fine but I cannot get the local user to connect. Still pam fails finding the user. The suggested password mismatch at the end is, in my eyes, because there is no user in the first place. I verified the password by interactive login to the account. The pam module (dovecot) is just the default file with three @includes in it. Syslog: Aug 29 20:18:02 mail-dev dovecot: auth(default): client in: AUTH#0112#011LOGIN#011service=imap#011lip=2a02:968:1:2:212:72:224:16#011rip=2001:888:1740:10:250:daff:fe41:4d1c#011lport=143#011rport=1093 Aug 29 20:18:02 mail-dev dovecot: auth(default): client out: CONT#0112#011VXNlcm5hbWU6 Aug 29 20:18:02 mail-dev dovecot: auth(default): client in: CONT#0112#011dGVzdHVzZXI= Aug 29 20:18:02 mail-dev dovecot: auth(default): client out: CONT#0112#011UGFzc3dvcmQ6 Aug 29 20:18:02 mail-dev dovecot: auth(default): client in: CONT#0112#011dmF4dm1z Aug 29 20:18:02 mail-dev dovecot: auth-worker(default): pam(testuser,2001:888:1740:10:250:daff:fe41:4d1c): lookup service=dovecot Aug 29 20:18:02 mail-dev dovecot: auth-worker(default): pam(testuser,2001:888:1740:10:250:daff:fe41:4d1c): #1/1 style=1 msg=Password: Aug 29 20:18:02 mail-dev dovecot: auth(default): cache(testuser,2001:888:1740:10:250:daff:fe41:4d1c): miss Aug 29 20:18:04 mail-dev dovecot: auth(default): cache(testuser,2001:888:1740:10:250:daff:fe41:4d1c): hit: Aug 29 20:18:04 mail-dev dovecot: auth(default): cache(testuser,2001:888:1740:10:250:daff:fe41:4d1c): User unknown Aug 29 20:18:04 mail-dev dovecot: auth-worker(default): pam(testuser,2001:888:1740:10:250:daff:fe41:4d1c): pam_authenticate() failed: Authentication failure (password mismatch?) (given password: xxxxxxxx) Aug 29 20:18:06 mail-dev dovecot: auth(default): client out: FAIL#0112#011user=testuser Relevant settings in dovecot: root@mail-dev:/etc/dovecot# dovecot -n # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-24-server x86_64 Ubuntu 10.04.1 LTS ext4 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap pop3 imaps pop3s managesieve listen: *, [::] ssl_cert_file: /etc/ssl/certs/ssl-mail.pem ssl_key_file: /etc/ssl/private/ssl-mail.key ssl_cipher_list: ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM disable_plaintext_auth: no verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_max_userip_connections(default): 10 mail_max_userip_connections(imap): 10 mail_max_userip_connections(pop3): 3 mail_max_userip_connections(managesieve): 10 mail_privileged_group: mail mail_location: maildir:/home/vmail/%d/%n:INDEX=/home/vmail/%d/%n mail_debug: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): imap_client_workarounds(managesieve): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): lda: postmaster_address: postmaster deliver_log_format: msgid=%m: %$ rejection_reason: Your message to <%t> was automatically rejected:%n%r auth_socket_path: /var/run/dovecot/auth-master auth default: mechanisms: plain login realms: kader.hcc.nl hobby.nl cache_size: 1024 user: vmail verbose: yes debug: yes debug_passwords: yes passdb: driver: pam args: setcred=yes failure_show_msg=yes cache_key=%u dovecot passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/dovecot-auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail Where should I look further for this dovecot pam problem? Is there such a thing as pam debugging? TIA Egbert Jan

1 1

[Dovecot] Sent mail issue
by Piyush Joshi 29 Aug '10

29 Aug '10

Dear All, I have few question regarding dovecot configuration for specific need which are as follows:- 1. I have IMAP folder with the name Sent Mail and i want whenever client uses any MUA to send mail from my server his mail must be kept in server's IMAP folder which is Sent Mail instead of local Sent folder. 2. Whenever user configures account in MUA, MUA automatically create some new folder like Junk Mail etc. while i am already using Spam folder to keep spam message in that folder so let me know how can i save myself from this. 3. Is there any thing which can also put deleted message in my server's Trash folder. Thanks

4 3

[Dovecot] "Multiple Commands in Progress" support
by Mike Cardwell 29 Aug '10

29 Aug '10

Section 5.5 of RFC3501 discusses the ability of IMAP servers to receive and execute multiple commands asynchronously on a single IMAP connection, not necessarily responding in the same order the commands were received: http://tools.ietf.org/html/rfc3501#section-5.5 Does Dovecot take advantage of this ability, or does it simply queue up the commands and execute them synchronously in order? -- Mike Cardwell - Perl/Java/Web developer, Linux admin, Email admin Read my tech Blog - https://secure.grepular.com/ Follow me on Twitter - http://twitter.com/mickeyc Hire me - http://cardwellit.com/ http://uk.linkedin.com/in/mikecardwell

1 0

Re: [Dovecot] dovecot - mac firewall problem
by Patrick Fay 28 Aug '10

28 Aug '10

>> Hi, >> I am running dovecot 1.2.11 on mac osx 1.5.8. Everything works >> perfectly with the application-level firewall off, but enabling the >> application firewall prevents dovecot connections. I have tried >> explicitly authorizing dovecot in the firewall, but it does not work. I >> have searched everywhere I can think of to look, and haven't found a >> solution, but have seen a couple other reports of what seems to be the >> same problem. The firewall logs the activity with what looks like a >> corrupt process name: a typical appfirewall.log entry looks like: >> >> Aug 26 20:43:45 hostname Firewall[55]: Deny ^L connecting from >> XX.XX.XX.XX:37310 uid = 0 proto=6 >> Aug 26 20:43:53 hostname Firewall[55]: Deny ^H?^U???^Z connecting from >> XX.XX.XX.XX:37310 uid = 0 proto=6 >> Aug 26 20:44:09 hostname Firewall[55]: Deny ^L connecting from >> XX.XX.XX.XX:37310 uid = 0 proto=6 >> Aug 26 20:44:34 hostname Firewall[55]: Deny ^L connecting from >> XX.XX.XX.XX:37312 uid = 0 proto=6 >> Aug 26 20:44:45: --- last message repeated 6 times --- >> >> where "hostname" is my server name and the XX's are my client's IP >> address. For all of the other services I've used, the process name >> (e.g. dovecot) should appear after "Deny" when blocking traffic, instead >> of the funny characters. Any advice on how I could resolve this issue >> would be greatly appreciated. Thanks! > > The application level firewall in OSX is aimed at _client_ use, not > server use. It's similar to Novell's AppArmor, etc. Leave it turned off. > > Simply because a piece of software (in this case an OS) offers any given > option does not mean every system needs it. Can you offer a compelling > reason why you _need_ the OSX application level firewall enabled? > Please point us to documentation that advises using it for any of your > services/daemons. > > -- > Stan > Hi was hoping to use the application firewall because this machine gets used both as a server as well as a client machine for more general use. I haven't been able to find any specific documentation for it, but I have found that the firewall works fine with postfix and several file services I use (enabling/disabling works as expected, process names get logged as expected, etc). Thanks! Patrick

2 1

[Dovecot] When should dictionary entries for the expire plugin be added/updated?
by Ralph Seichter 28 Aug '10

28 Aug '10

I've set up Dovecot 2.0 with the expire plugin using an SQLite DB, and when mail is delivered via dovecto-lda, the DB gets updated as expected. However, when I use Thunderbird 3.1.2 for Mac OS X to move a message to any of the folders known to the expire plugin (e.g. the 'tmp' folder), the SQLite DB is not updated. Here is an excerpt of my current configuration: # /etc/dovecot/dovecot.conf dict { expire = sqlite:/etc/dovecot/dict-expire.conf } plugin { expire = Junk expire2 = Trash expire3 = tmp expire4 = *.News expire5 = *.Reports expire_dict = proxy::expire sieve = /etc/dovecot/sieve/%u.sieve } service dict { unix_listener dict { # Ensure that there is no permission-related problem mode = 0666 } } protocol lda { mail_plugins = expire sieve postmaster_address = postmaster(a)domain.tld sendmail_path = /usr/sbin/sendmail } # /etc/dovecot/dict-expire.conf connect = /var/lib/dovecot/expires.sqlite map { pattern = shared/expire/$user/$mailbox table = expires value_field = expire fields { username = $user mailbox = $mailbox } } # Schema dump of /var/lib/dovecot/expires.sqlite PRAGMA foreign_keys=OFF; BEGIN TRANSACTION; CREATE TABLE expires ( username VARCHAR(75) NOT NULL, mailbox VARCHAR(255) NOT NULL, expire integer NOT NULL, PRIMARY KEY (username, mailbox) ); CREATE TRIGGER mergeexpire BEFORE INSERT ON expires FOR EACH ROW BEGIN UPDATE expires SET expire=NEW.expire WHERE username=NEW.username AND mailbox=NEW.mailbox; SELECT RAISE(IGNORE) WHERE (SELECT 1 FROM expires WHERE username=NEW.username AND mailbox=NEW.mailbox) IS NOT NULL; END; COMMIT; With these settings, rows will be inserted to (or updated within) expires.sqlite when dovecot-lda stores messages to any of my "Reports" folders using sieve rules. When I manually move messages to "tmp" or "Junk", the database remains unchanged. Also, when I delete messages in Thunderbird, I'd expect database additions for the folder "Trash", but this does not happen either. What am I doing wrong here? -Ralph

5 27

[Dovecot] Error: service(auth): child 2212 killed with signal 11
by Toorop 28 Aug '10

28 Aug '10

Hi, Auth always crash (segfault) using vpopmail backend. Any idea ? vpopmail 5.5.0 os: ubuntu 10.04 on rackspace cloud # dovecot -n dovecot -n # 2.0.1: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.35.1-rscloud x86_64 Ubuntu 10.04.1 LTS auth_debug = yes auth_mechanisms = plain login cram-md5 auth_verbose = yes auth_verbose_passwords = plain disable_plaintext_auth = no first_valid_uid = 89 log_path = /var/log/dovecot/dovecot.log mail_debug = yes passdb { driver = vpopmail } protocols = imap pop3 service auth { unix_listener auth-userdb { group = vchkpw mode = 0600 user = vpopmail } user = root } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = vpopmail } Log: Aug 28 10:59:48 auth: Debug: Loading modules from directory: /usr/local/lib/dovecot/auth Aug 28 10:59:48 auth: Debug: auth client connected (pid=2211) Aug 28 10:59:49 auth: Debug: client in: AUTH 1 CRAM-MD5 service=imap secured lip=184.106.217.69 rip=178.32.33.247 lport=143 rport=49099 Aug 28 10:59:49 auth: Debug: client out: CONT 1 PDM3MjI0MzQ4NjQzNTI3NjUuMTI4Mjk5MzE4OUByYWNrc3BhY2UuZGVkaW1haWwuZXU+ Aug 28 10:59:49 auth: Debug: client in: CONT<hidden> Aug 28 10:59:49 auth: Debug: vpopmail(toorop(a)respublica.fr,178.32.33.247): lookup user=toorop domain=respublica.fr Aug 28 10:59:49 auth: Debug: client out: OK 1 user=toorop(a)respublica.fr Aug 28 10:59:49 auth: Debug: master in: REQUEST 1 2211 1 e4920e51f96ae453663098df19c5b374 Aug 28 10:59:49 auth: Debug: vpopmail(toorop(a)respublica.fr,178.32.33.247): lookup user=toorop domain=respublica.fr Aug 28 10:59:49 imap-login: Info: Internal login failure (auth failed, 1 attempts): user=<toorop(a)respublica.fr>, method=CRAM-MD5, rip=178.32.33.247, lip=184.106.217.69, mpid=2214, TLS Aug 28 10:59:49 master: Error: service(auth): child 2212 killed with signal 11 (core dumps disabled) strace : http://pastebin.com/kYsWHP5J Thanks, -- Toorop «Ils ne savaient pas que c'était impossible, alors ils l'ont fait.» Mark Twain

2 3

[Dovecot] Roff typo in sievec.1.in
by Mike Abbott 27 Aug '10

27 Aug '10

There is a roff typo in pigeonhole's sievec.1.in. Roff treats the leading apostrophe on line 54 as an invalid command and produces bad output: dump to be written to stdout. The out-file argument may also be omitted, which has the same effect as for a com- piled Sieve binary file. Note that this option is not The output should be: dump to be written to stdout. The out-file argument may also be omitted, which has the same effect as '-'. The output is identical to what the sieve-dump(1) command pro- duces for a compiled Sieve binary file. Note that this Here is a patch: --- a/doc/man/sievec.1.in +++ b/doc/man/sievec.1.in @@ -50,8 +50,9 @@ Don\(aqt write the binary to \fIout\-file\fP, but write a textual dump of the binary instead. In this context, the \fIout\-file\fP value '\-' has special meaning: it causes the the textual dump to be written to \fBstdout\fP. -The \fIout\-file\fP argument may also be omitted, which has the same effect as -'\-'. The output is identical to what the \fBsieve\-dump\fP(1) command produces +The \fIout\-file\fP argument may also be omitted, which has the same effect +as '\-'. +The output is identical to what the \fBsieve\-dump\fP(1) command produces for a compiled Sieve binary file. Note that this option is not allowed when the \fIout\-file\fP argument is a directory. .TP

2 1

[Dovecot] pigeonhole needs to ship doc/man/{reporting-bugs.inc, sed.sh}
by Paul Howarth 27 Aug '10

27 Aug '10

A tarball created from current pigeonhole hg using "make dist" doesn't include the files doc/man/{reporting-bugs.inc,sed.sh} and fails to build as a result. Attached patch works for me. Paul

2 1

[Dovecot] dovecot - mac firewall problem
by Patrick Fay 27 Aug '10

27 Aug '10

Hi, I am running dovecot 1.2.11 on mac osx 1.5.8. Everything works perfectly with the application-level firewall off, but enabling the application firewall prevents dovecot connections. I have tried explicitly authorizing dovecot in the firewall, but it does not work. I have searched everywhere I can think of to look, and haven't found a solution, but have seen a couple other reports of what seems to be the same problem. The firewall logs the activity with what looks like a corrupt process name: a typical appfirewall.log entry looks like: Aug 26 20:43:45 hostname Firewall[55]: Deny ^L connecting from XX.XX.XX.XX:37310 uid = 0 proto=6 Aug 26 20:43:53 hostname Firewall[55]: Deny ^H�^U��^Z connecting from XX.XX.XX.XX:37310 uid = 0 proto=6 Aug 26 20:44:09 hostname Firewall[55]: Deny ^L connecting from XX.XX.XX.XX:37310 uid = 0 proto=6 Aug 26 20:44:34 hostname Firewall[55]: Deny ^L connecting from XX.XX.XX.XX:37312 uid = 0 proto=6 Aug 26 20:44:45: --- last message repeated 6 times --- where "hostname" is my server name and the XX's are my client's IP address. For all of the other services I've used, the process name (e.g. dovecot) should appear after "Deny" when blocking traffic, instead of the funny characters. Any advice on how I could resolve this issue would be greatly appreciated. Thanks!

2 1

[Dovecot] LDAP & static userdb
by spamvoll＠googlemail.com 27 Aug '10

27 Aug '10

hi.. im just testing 2.0 before upgrading to v1.2 :) in auth-ldap.conf.ext i found # If you don't have any user-specific settings, you can avoid the userdb LDAP # lookup by using userdb static instead of userdb ldap, for example: # <doc/wiki/UserDatabase.Static.txt> #userdb { #driver = static #args = uid=vmail gid=vmail home=/var/vmail/%u #} On 1.2 im using LDAP lookup and everthing works like a charm. user_attrs = homeDirectory=home,uid=mail=maildir:/home/MAILBOXES/%$/mail On 2.0 is now tried to use this option cause all my mail are stored in /home/MAILBOXES/%uid/mail userdb { driver = static args = uid=vmail gid=vmail home=/home/MAILBOXES/%u/mail } and that doesnt work log say: dovecot: imap(hpeter): Error: user hpeter: Initialization failed: mail_location not set and autodetection failed: Mail storage autodetection failed with home=/home/MAILBOXES/hpeter/mail Hans

1 1

Re: [Dovecot] (Single instance) attachment storage
by Damon Atkins 27 Aug '10

27 Aug '10

Some interesting reading on SHA256 checksum http://blogs.sun.com/bonwick/entry/zfs_dedup http://blogs.sun.com/darren/entry/improving_zfs_dedup_performance_via

1 0

[Dovecot] Single instance storage - testing please
by Timo Sirainen 27 Aug '10

27 Aug '10

http://hg.dovecot.org/dovecot-2.0-sis contains the code for it. Otherwise it's the latest (as of writing this) dovecot-2.0 hg tree. Please test if you're interested in SIS. :) Once there's at least some testing, I'll probably add this to v2.0.x since very little of this new code is used when SIS is disabled (which is the default of course). SIS works pretty much like explained in http://dovecot.org/list/dovecot/2010-July/050832.html and http://dovecot.org/list/dovecot/2010-July/050992.html Two things I'm not yet entirely sure about: 1. What hash algorithm to use? Currently it's hard coded to SHA1. Besides more CPU usage, the other potential problem with larger hashes is that they also generate larger filenames. The filenames are currently hex-encoded, but to save space they could be changed to some kind of modified-base64 (base64 uses '/' chars, so it can't be regular base64). Example filename lengths: hex modified-base64 SHA1 73 50 SHA256 97 66 SHA512 161 109 Yet another possibility would be to use SHA256/SHA512 and just truncate the hash length to less number of bits. 2. Should I add support for trusting hash uniqueness and to avoid disk I/O generated by the byte-by-byte comparison? It could still first check that the file sizes match. Usage ----- You can enable SIS for sdbox and mdbox: mail_attachment_dir = /var/attachments Just setting the above enables "instant SIS", where byte-by-byte comparison is done immediately during saving mails. Alternative is to leave the comparing later by setting: mail_attachment_fs = sis-queue /var/attachments/queue:posix This does no deduplication itself yet. To do that you'll need a nighty (or whatever) run, which calls: doveadm sis deduplicate /var/attachments /var/attachments/queue There's also a feature to easily find all attachments based on a hash. For example: % sha1sum foo 351641b73feb7cf7e87e5a8c3ca9a37d7b21e525 foo % doveadm sis find /var/attachments 351641b73feb7cf7e87e5a8c3ca9a37d7b21e525 /var/attachments/35/16/351641b73feb7cf7e87e5a8c3ca9a37d7b21e525-e13a841f28ba764c123b00008c4a11c1 /var/attachments/35/16/351641b73feb7cf7e87e5a8c3ca9a37d7b21e525-1d3b940628ba764c0b3b00008c4a11c1 If you want to save attachments to a separate files without SIS (e.g. you want to use your filesystems deduplication), set: mail_attachment_fs = posix By default only attachments larger than 128 kB are written to attachment storage. You can change it from: mail_attachment_min_size = 128k It's also possible to create a plugin that adds further restrictions to when the attachment is saved separately. This might be useful to reduce disk seeks for attachments that are typically shown inline by clients/webmail. You can do this by overriding mailbox.save_is_attachment() method. If you want to distribute attachments to multiple filesystems, just create /var/attachments/[0-9a-f][0-9a-f] as symlinks pointing to whatever mount paths you want.

3 8

[Dovecot] Panic, rawtrace, log, etc
by Brandon Lamb 27 Aug '10

27 Aug '10

While running some doveadm expunge -A mailbox Spam savedbefore 30d and doveadm purge -A after 2010-08-26 16:20:51 auth: Error: net_accept() failed: Too many open files 2010-08-26 16:20:51 master: Warning: service(auth): process_limit reached, client connections are being dropped 2010-08-26 16:21:21 auth: Panic: file auth-request-handler.c: line 85 (auth_request_handler_unref): assertion failed: (hash_table_count(handler->requests) == 0) 2010-08-26 16:21:21 auth: Error: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0(+0x39c1a) [0x7fe41f5f5c1a] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x39c6a) [0x7fe41f5f5c6a] -> /usr/local/lib/dovecot/libdovecot.so.0(i_error+0) [0x7fe41f5d3026] -> dovecot/auth [8 wait, 0 passdb, 0 userdb]() [0x412153] -> dovecot/auth [8 wait, 0 passdb, 0 userdb]() [0x40c3ad] -> dovecot/auth [8 wait, 0 passdb, 0 userdb](auth_client_connections_deinit+0x41) [0x40c461] -> dovecot/auth [8 wait, 0 passdb, 0 userdb](main+0x2ea) [0x4168ca] -> /lib/libc.so.6(__libc_start_main+0xfd) [0x7fe41e60ac4d] -> dovecot/auth [8 wait, 0 passdb, 0 userdb]() [0x40b1f9] 2010-08-26 16:21:21 master: Error: service(auth): child 14880 killed with signal 6 (core dumps disabled) 2010-08-26 16:21:21 auth: Error: Master requested auth for nonexistent client 14875 2010-08-26 16:21:21 auth: Error: Master requested auth for nonexistent client 14873 2010-08-26 16:21:21 auth: Error: Master requested auth for nonexistent client 14873 2010-08-26 16:21:21 auth: Error: Master requested auth for client 14874 with invalid cookie 2010-08-26 16:21:21 auth: Error: Master requested auth for client 14874 with invalid cookie 2010-08-26 16:21:21 auth: Error: Master requested auth for client 14875 with invalid cookie 2010-08-26 16:21:21 auth: Error: Master requested auth for client 14876 with invalid cookie 2010-08-26 16:21:21 auth: Error: Master requested auth for client 14875 with invalid cookie

2 3

[Dovecot] Configuration Update From v1.x To v2.0.1-2
by Carlos Mennens 26 Aug '10

26 Aug '10

I just upgraded my Dovecot IMAP package on my mail server and when I restarted the service, I got the following warnings... doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:12: add auth_ prefix to all settings inside auth {} and remove the auth {} section completely doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:14: passdb pam {} has been replaced by passdb { driver=pam } doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:16: userdb passwd {} has been replaced by userdb { driver=passwd } doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:18: auth_user has been replaced by service auth { user } The list was much longer but I was able to self resolve them. I was wondering if someone here can assist me in converting my 'dovecot.conf' file? Below is how my dovecot.conf file appears: protocols = imap disable_plaintext_auth = yes log_timestamp = "%b %d %H:%M:%S " mail_location = maildir:~/mail auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep } auth default { mechanisms = plain login passdb pam { } userdb passwd { } user = root socket listen { client { path = /var/run/dovecot/auth-client user = postfix group = postfix mode = 0660 } } } ***doveconf -n*** [root@mail /]# doveconf -n # 2.0.1: /etc/dovecot/dovecot.conf doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:12: add auth_ prefix to all settings inside auth {} and remove the auth {} section completely doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:14: passdb pam {} has been replaced by passdb { driver=pam } doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:16: userdb passwd {} has been replaced by userdb { driver=passwd } doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:18: auth_user has been replaced by service auth { user } # OS: Linux 2.6.35 x86_64 auth_mechanisms = plain login mail_location = maildir:~/mail passdb { driver = pam } protocols = imap service auth { unix_listener auth-client { group = postfix mode = 0660 user = postfix } user = root } userdb { driver = passwd } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep }

4 7

[Dovecot] How to pipe to external program
by Egbert 26 Aug '10

26 Aug '10

Hi, Second try... I have mailsystem with virtual users only (/home/vmail/domain/user). I need to integrate RT3.x (a ticketing system). I have installed the RT-client but I need to send the mail to an extrnal program. Rt wants me to insert: |/usr/bin/rt-mailgate --queue bla --action bla --url http://bla.bal/ In /etc/postfix/aliases. That does not work for me becase my local delivery agent is dovecot. The Sieve plugin seems not capable to forward to a external program. What is the right way to achieve that mail to rt@mydomain is sent to the pipe? TIA Egbert Jan

2 1

Re: [Dovecot] Investigating suspected cache corruption
by Maria Elinger 26 Aug '10

26 Aug '10

Hi David and all, I´ve read the mail you posted in the Dovecot list. We´re are having this same problem in a site which is very similar to yours. We also migrated from Courier to Dovecot nearly 9 months ago, and every now and then users complain about slowness in the imap connection. We fix it by removing the index files in the user's maildir. We use Horde as webmail, but the problem appears with any imap or pop connection, so we feel that the problem is in Dovecot. Did you find any solution or workaround at your site?, it would be very useful if you gave us a hint on this. Thanks in advance, María Elinger [Dovecot] Investigating suspected cache corruption David Warden Wed, 14 Oct 2009 13:18:17 Hi All, I'm running Dovecot 1.1.11 for a site of about 7000 active users with a Squirrelmail frontend. We migrated from Courier (big shout to everyone who worked on the wonderful part of the Dovecot wiki that deals with Courier migration) and I have been extremely happy with the performance gains Dovecot has given us. Not only is the IMAP part of Squirrelmail faster, but our same hardware is under far less stress than it was before the migration. To date, the only problem we have experienced is a seemingly random but significant slowdown in Squirrelmail's loading of the messages in a user's Inbox. Each time, I have been able to fix the problem by deleting the user's dovecot.index, dovecot.index.cache and dovecot.index.log files in the user's INDEX directory for their dovecot Inbox. I tried having users experiencing this problem log in to a test Squirrelmail box with mail_debug on, but I didn't see anything out of the ordinary and they report the same slowness on the test server. I don't see anything but normal login/logout IMAP lines in the production dovecot logs. I have hesitated a bit in posting to the list since this seems to be happening to a small percentage of users and it technically may be a problem with Squirrelmail, but the fact that I'm able to fix the problem by nuking Dovecot's index files has me concerned - does anyone have any suggestions for troubleshooting? My first idea when I get another one of these is to do a telnet IMAP session to Dovecot on one of the Squirrelmail boxes and see if I can get it to slow down when retrieving messages from the Inbox. We are using Maildir over NFS with the control/index files stored on NFS as well. We're doing FS quota over NFS using rquotad to query the NFS server for each user's quota. Here's the output of dovecot -n: # 1.1.11: /etc/dovecot.conf Warning: fd limit 1024 is lower than what Dovecot can use under full load (more than 1536). Either grow the limit or change login_max_processes_count and max_mail_processes settings # OS: Linux 2.6.18-128.1.1.0.1.el5 x86_64 Red Hat Enterprise Linux Server release 5.3 (Tikanga) login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_process_per_connection: no login_processes_count: 10 login_max_processes_count: 512 verbose_proctitle: yes first_valid_uid: 0 mail_location: maildir:~/Maildir:CONTROL=/Mail/mailhome/ %u/.dovecot:INDEX=/Mail/mailhome/%u/.dovecot mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes mail_drop_priv_before_exec: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): imap_logout_format(default): bytes(in/out)=%i/%o imap_logout_format(imap): bytes(in/out)=%i/%o imap_logout_format(pop3): bytes=%i/%o pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): UID%u-%v pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_logout_format(default): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_logout_format(imap): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_logout_format(pop3): top(count/bytes)=%t/%p, retr(count/bytes)=%r/ %b, del(deleted/pre-deleted)=%d/%m, mailbox-size(bytes)=%s namespace: type: private prefix: INBOX. inbox: yes list: yes subscriptions: yes auth default: mechanisms: plain login passdb: driver: pam userdb: driver: passwd plugin: quota: fs:Mail Quota:user Many thanks, David Warden

2 2

[Dovecot] 1.2.13 QRESYNC crash.
by David Woodhouse 26 Aug '10

26 Aug '10

Aug 18 22:07:31 twosheds IMAP(dwmw2): : Panic: file mail-index-transaction.c: line 637 (mail_index_transaction_lookup): assertion failed: (seq >= t->first_new_seq && seq <= t->last_new_seq) * PREAUTH [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS] Logged in as dwmw2 0 enable condstore qresync * ENABLED CONDSTORE QRESYNC 0 OK Enabled. A00131 SELECT lists.bluez (QRESYNC (1154090296 1861 1:* (1,120,1578,2064,2226,2280,2298 1,120,12037,12523,12685,12739,12757))) Program received signal SIGABRT, Aborted. 0x00000034ace326c5 in raise () from /lib64/libc.so.6 Missing separate debuginfos, use: debuginfo-install cyrus-sasl-lib-2.1.23-9.fc12.x86_64 glibc-2.11.2-1.x86_64 keyutils-libs-1.2-6.fc12.x86_64 krb5-libs-1.7.1-9.fc12.x86_64 libcom_err-1.41.9-8.fc12.x86_64 libgcc-4.4.4-10.fc12.x86_64 libselinux-2.0.90-5.fc12.x86_64 nss-softokn-freebl-3.12.6-2.fc12.1.x86_64 openldap-2.4.19-4.fc12.x86_64 openssl-1.0.0a-1.fc12.x86_64 zlib-1.2.3-23.fc12.x86_64 (gdb) bt #0 0x00000034ace326c5 in raise () from /lib64/libc.so.6 #1 0x00000034ace33ea5 in abort () from /lib64/libc.so.6 #2 0x00000000004a2698 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 #3 0x00000000004a273b in i_syslog_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=<value optimized out>, args=<value optimized out>) at failures.c:315 #4 0x00000000004a1d86 in i_panic (format=0x6 <Address 0x6 out of bounds>) at failures.c:207 #5 0x00000000004787f0 in mail_index_transaction_lookup ( t=<value optimized out>, seq=<value optimized out>) at mail-index-transaction.c:637 #6 0x000000000047be45 in tview_lookup_uid (view=<value optimized out>, seq=<value optimized out>, uid_r=<value optimized out>) at mail-index-transaction-view.c:162 #7 0x00000000004580fb in index_mail_set_seq (_mail=0x7282b8, seq=1578) at index-mail.c:1229 #8 0x0000000000423eb4 in expunges_drop_known (ctx=0x70a628) at imap-fetch.c:178 #9 get_expunges_fallback (ctx=0x70a628) at imap-fetch.c:269 #10 imap_fetch_send_vanished (ctx=0x70a628) at imap-fetch.c:291 #11 imap_fetch_begin (ctx=0x70a628) at imap-fetch.c:314 #12 0x000000000041e8e2 in select_qresync (cmd=<value optimized out>, ---Type <return> to continue, or q <return> to quit--- readonly=<value optimized out>) at cmd-select.c:243 #13 select_open (cmd=<value optimized out>, readonly=<value optimized out>) at cmd-select.c:320 #14 cmd_select_full (cmd=<value optimized out>, readonly=<value optimized out>) at cmd-select.c:382 #15 0x0000000000420ead in client_command_input (cmd=0x70a458) at client.c:612 #16 0x0000000000420f8d in client_command_input (cmd=0x70a458) at client.c:661 #17 0x00000000004211b5 in client_handle_next_command (client=0x709ff0) at client.c:702 #18 client_handle_input (client=0x709ff0) at client.c:714 #19 0x0000000000421a5c in client_input (client=0x709ff0) at client.c:753 #20 0x00000000004aa7cd in io_loop_handler_run (ioloop=<value optimized out>) at ioloop-epoll.c:208 #21 0x00000000004a9c38 in io_loop_run (ioloop=0x707cc0) at ioloop.c:335 #22 0x0000000000429726 in main (argc=<value optimized out>, argv=<value optimized out>, envp=<value optimized out>) at main.c:327 It's a public mailing list folder, so I've uploaded it to http://david.woodhou.se/bluez-maildir.tar.gz Filed as Red Hat bug #625907: https://bugzilla.redhat.com/show_bug.cgi?id=625207 -- dwmw2

3 10

[Dovecot] New problem with migration to 2.0
by Carsten Laun-De Lellis 26 Aug '10

26 Aug '10

Hi guys After fixing my master_auth problem i have one error message left and i don't know what to do. The message from dovecot -n is: service auth { unix_listener /var/spool/postfix/private/auth { group = vmail mode = 0666 user = vmail } unix_listener auth-master { mode = 0666 } } My conf file looks like userdb { driver=static args = uid=10000 gid=10000 home=/mail/%d/%n allow_all_users=yes } As you can see pretty simple, but for me it looks like that the driver=static won't be accepted. Does anyone know which driver to use here ? Mit freundlichem Gruß Carsten Laun-De Lellis Dipl.-Ing. Elektrotechnik Certified Information Systems Auditor (CISA) Hauptstrasse 13 D-67705 Trippstadt Phone: +49 (6306) 992140 Mobile: +49 (151) 27530865 email: carsten.laun-delellis(a)delellis.net

2 4

[Dovecot] migration to dovecot 2.0
by Carsten Laun-De Lellis 26 Aug '10

26 Aug '10

Hi everyone I am not the dovecot guru and i would appreciate if anyone could help me on my problems. I am running a mail server on dovecot 1.2 and want to migrate to dovecot 2. I have edited the conf file and now using the new keywords and got everything fixed but the following error message still exists, when i try to start dovecot. doveconf: Fatal: Error in configuration file /usr/local/etc/dovecot/dovecot.conf line 1036: Unknown setting: auth_socket doveconf: Error: managesieve-login: dump-capability process returned 89 doveconf: Fatal: Error in configuration file ./dovecot.conf line 1036: Unknown setting: auth_socket My conf file looks like auth_socket listen { master { # Master socket provides access to userdb information. It's typically # used to give Dovecot's local delivery agent access to userdb so it # can find mailbox locations. path = /var/run/dovecot/auth-master mode = 0600 # Default user/group is the one who started dovecot-auth (root) user = vmail #group = } client { # The client socket is generally safe to export to everyone. Typical use # is to export it to your SMTP server so it can do SMTP AUTH lookups # using it. path = /var/spool/postfix/private/auth # path = /var/run/dovecot/auth-client mode = 0660 user = postfix group = postfix } } I would appreciate any hints and help. Mit freundlichem Gruß Carsten Laun-De Lellis Dipl.-Ing. Elektrotechnik Certified Information Systems Auditor (CISA) Hauptstrasse 13 D-67705 Trippstadt Phone: +49 (6306) 992140 Mobile: +49 (151) 27530865 email: carsten.laun-delellis(a)delellis.net

2 2

[Dovecot] Does Dovecot support the use of the INDEX directive for mdbox?
by William Blunn 26 Aug '10

26 Aug '10

Does Dovecot support the use of the INDEX directive for mdbox? e.g. mail_location = mdbox:~/mdbox:INDEX=/var/indexes/%u Bill

2 1

[Dovecot] Table mail.users doesn't exist (using built-in default iterate_query: SELECT username, domain FROM users)
by Jerrale G 26 Aug '10

26 Aug '10

connect = host=127.0.0.1 user=mail password=thecorrectpass dbname=mail map { pattern = shared/expire/$user/$mailbox table = mail.expires value_field = expire_stamp fields { username = $user mailbox = $mailbox } } dovecot: auth: Error: mysql: Query failed, retrying: Table 'mail.users' doesn't exist Aug 26 05:16:24 server1 dovecot: auth: Error: sql: Iterate query failed: Table 'mail.users' doesn't exist (using built-in default iterate_query: SELECT username, domain FROM users) Why isn't the expire dict trying to use the defined working mysql auth instead of using the built-in default? The howto doesn't say how to override this, at wiki2.dovecot.org, and I didn't know the expire dict wanted to lookup the mailbox table; I thought it only wanted to lookup the expire table and use that soley for deleting messages as all info needed was stored, in the expire table, by the expire plugin on message delivery or copy. Jerrale G rrale G. SC Senior Admin

1 0

[Dovecot] best way something thinks to upgrade dovecot to 1.2.* 2.0.*
by fakessh 26 Aug '10

26 Aug '10

hello all hello dovecot network hello timo What are your tips for successful migration for dovecot (atrpms , atrpms-testing depot for centos ) the page of wiki http://wiki2.dovecot.org/Upgrading/2.0 explains the method to upgrade I tried on my personal machine and the command cites wiki returns errors on the terminal what to do with errors: correct the error in the configuration file ? the question may seem simple but it is not pointless many returns are welcome something thinks are welcome thanks

2 10

[Dovecot] dovecot 1 to 2 migration FreeBSD
by Frank Bonnet 26 Aug '10

26 Aug '10

Hello is there some specials recommentations to migrate from dovecot 1.1.x to 2.0.1 with FreeBSD boxes ? Thanks

5 11

[Dovecot] Home directories
by Timo Sirainen 25 Aug '10

25 Aug '10

I've noticed that a lot of people are using e.g.: mail_location = maildir:/var/vmail/%d/%n Then either they don't have home directory set, or their home directory is the same as the maildir. http://wiki.dovecot.org/VirtualUsers/Home explains all the problems of not separate home and mail directories. Also whenever I try to suggest using a separate home and mail directory, the answer is way too often: "But I'm using virtual users. (They don't have home directories.)" So I started wondering. Maybe simply renaming the "home" to something else would help here at least some. Make all of the documentation use only the new word, and add alias for userdb so that the new name and the "home" both work (I guess docs would need to keep using the "home" as field name for some more years). So far I've only come up with "vhome" as the replacement name. Other ideas?

12 19

[Dovecot] DSYNC needs a lot more documentation
by Marc Perkel 25 Aug '10

25 Aug '10

Started looking into the dsync utility and the doc are seriously incomplete. I can of course scour the internet looking for the missing information but that doesn't fix the problem with the docs. I might try to rewrite the docs myself once I figure it out.

9 15

[Dovecot] Pure virtual user and RT3.x
by Egbert 25 Aug '10

25 Aug '10

Hi, I have mailsystem with virtual users only (/home/vmail/domain/user). I need to integrate RT3.x (a ticketing system). I have installed the client but I need to send mail to a pipe. Rt wants me to insert: |/usr/bin/rt-mailgate --queue bla --action bla --url http://bla.bal/ In /etc/postfix/aliases. That does not work for me. What is the right way to achieve that mail to rt@mydomain is sent to the pipe? Should I install, configure and use a Sieve filter? I have none installed at the moment. Or are there other (simpler?) ways? TIA Egbert Jan

2 2

Re: [Dovecot] Live Mirror dovecot / OS X 10.6.4 (Timo Sirainen)
by Eric Boltz (MMI / UPC) 25 Aug '10

25 Aug '10

Timo Sirainen <tss(a)iki.fi> wrote: > Two potential problems I see with this: > 1. If users can do any changes on the secondary server (flag changes, > saving new mails, etc), you're going to have problems syncing the > changes back (without losing any changes or causing other problems). > > 2. If users can access the secondary server via IMAP clients, the > clients could become confused if the secondary server isn't completely > up-to-date. > > With v2.0 dsync would help with the first problem. Change in strategy. Primary rsyncs regularly to the secondary which keeps all mail services off. When primary fails email services are started manually until primary back online. Then I (or another ITer) manually stop the backup, rsycn and restart services on the primary. A bit labor intensive, but it should work.

4 5

[Dovecot] Problems compiling Dovecot 2.0.0 on Solaris 10 x86
by Drew Schatt 25 Aug '10

25 Aug '10

I'm having issues getting Dovecot 2.0.0 to compile - I get the following error: cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-settings -I../../src/lib-master -DPKG_RUNDIR=\""/usr/local/var/run/dovecot"\" -DPKG_LIBEXECDIR=\""/usr/local/libexec/dovecot"\" -DEXAMPLE_CONFIG_DIR=\""/usr/local/share/doc/dovecot/example-config"\" -DMODULEDIR=\""/usr/local/lib/dovecot"\" -DSSLDIR=\""/etc/ssl\"" -I/usr/local/include -I/usr/local/ssl/include -D_XPG6 -L/usr/local/lib -L/usr/local/ssl/lib -KPIC -lm -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -xc99 -I/usr/local/include -I/usr/local/ssl/include -L/usr/local/lib -L/usr/local/ssl/lib -D_XPG6 -xstrconst -KPIC -lm -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -c doveconf.c "config-request.h", line 6: warning: useless declaration "doveconf.c", line 554: undefined symbol: optarg "doveconf.c", line 554: warning: improper pointer/integer combination: arg #2 "doveconf.c", line 560: warning: improper pointer/integer combination: op "=" "doveconf.c", line 581: undefined symbol: optind "doveconf.c", line 583: undefined symbol: optind "doveconf.c", line 584: undefined symbol: optind cc: acomp failed for doveconf.c gmake[3]: *** [doveconf.o] Error 2 gmake[3]: Leaving directory `/home/schatt/code/evaluation_src/dovecot-2.0.0/src/config' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory `/home/schatt/code/evaluation_src/dovecot-2.0.0/src' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/home/schatt/code/evaluation_src/dovecot-2.0.0' gmake: *** [all] Error 2 Anyone have any idea on how to resolve this one? -Drew

2 1

[Dovecot] Signal 11 - can't get core dump?
by Marty Anstey 25 Aug '10

25 Aug '10

Hi all, We have been running Dovecot for over a year now in our moderate volume mail environment (>4000 mailboxes) and it's been running great. However, over the past month or so we've begun to experience issues where IMAP clients will appear to "hang" for a period of time, we then see a sig 11, and afterwards mailflow returns to normal. This usually happens a few times a day. Naturally, our first instinct was to try and get a core dump, but after following the instructions at http://www.dovecot.org/bugreport.html we now recieve this warning: 2010-08-24T13:33:56-07:00 mail dovecot: child 9728 (login) killed with signal 11 (core not dumped - add -D to login_executable) (ip=208.98.210.13) Adding -D to the login_executable lines didn't seem to have any effect, we are still receiving the same message. Did we perhaps misinterpret the hint? As we've been trying for over a week now to find a way to get a dump without any success, we figured posing this to the list might help us shed some light on the issue. Any suggestions would be appreciated! dovecot -n -- # 1.1.20: /etc/dovecot.conf # OS: Linux 2.6.18-164.15.1.el5xen i686 CentOS release 5.5 (Final) nfs base_dir: /var/run/dovecot/ listen: 208.98.210.10 ssl_ca_file: /etc/ssl/gd_bundle.crt ssl_cert_file: /etc/ssl/sunwave.net.crt ssl_key_file: /etc/ssl/sunwave.net.key ssl_parameters_regenerate: 1 ssl_cipher_list: ALL:!LOW verbose_ssl: yes login_dir: /var/run/dovecot//login login_executable(default): /usr/libexec/dovecot/imap-login -D login_executable(imap): /usr/libexec/dovecot/imap-login -D login_executable(pop3): /usr/libexec/dovecot/pop3-login -D mail_max_userip_connections(default): 50 mail_max_userip_connections(imap): 50 mail_max_userip_connections(pop3): 10 first_valid_uid: 200 last_valid_uid: 200 first_valid_gid: 200 last_valid_gid: 200 mail_location: maildir:/var/spool/mail/%Ld/%1Lu/%Ln/Maildir mail_debug: yes mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes mail_executable(default): /usr/local/bin/mailtools/mail_imap.sh mail_executable(imap): /usr/local/bin/mailtools/mail_imap.sh mail_executable(pop3): /usr/local/bin/mailtools/mail_pop3.sh mail_plugins(default): quota imap_quota trash mail_plugins(imap): quota imap_quota trash mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 namespace: type: private prefix: INBOX. inbox: yes list: yes subscriptions: yes lda: postmaster_address: do_not_reply(a)sunwave.net mail_plugins: quota cmusieve auth default: mechanisms: plain login default_realm: sunwave.net verbose: yes passdb: driver: sql args: /etc/dovecot-mysql.conf userdb: driver: sql args: /etc/dovecot-mysql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 511 user: vmail plugin: sieve: /var/spool/mail/%Ld/%1Lu/%Ln/Maildir/.sieve quota: maildir:Quota quota_rule2: Trash:storage=10%% quota_warning: storage=70%% /usr/local/bin/mailtools/quota-warning.sh 70 quota_warning2: storage=80%% /usr/local/bin/mailtools/quota-warning.sh 80 quota_warning3: storage=90%% /usr/local/bin/mailtools/quota-warning.sh 90 trash: /etc/dovecot-trash.conf Thanks, Marty

3 3

[Dovecot] Help needed with plugin - Read Only access to IMAP mailbox
by Chris Moules 25 Aug '10

25 Aug '10

System info: # 1.2.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686-bigmem i686 Debian squeeze/sid .. mail_plugins: readonly .. I have a requirement to have read-only to a mailbox. I have been researching through the wiki, the mailing list archives and good old Google. There was a number of similar questions with no real definitive answer. Option 1: ACL This can work, but not if the mailbox(s) can change without you knowing how. I.E. a online read-only archive of someone else's mailbox. There is no wild-card or recursive ACL options. Rsync style backups don't allow for easy creation of custom ACL files per mailbox. Option 2: Read-only filesystem (Linux) This seems easy, but it's not. 1) how do you update your archive? I tried with a bind mount, this does not let you set the 'ro' option *directly*. You must then use "-o remount,ro" to get your read-only bind mount. This is a little messy (needs custom init scripts for mounting on boot), but do-able. 2) Dovecot needs write access to CONTROL and INDEX files. This lead me to using the "CONTROL" and "INDEX" options on the mail_locaiton. Setting these to the original 'rw' mount and the rest to my 'ro' bind mount. Again, messy but do-able. 3) Clients try to move messages from 'new' to 'cur' for Maildir. Every time I opened a maildir I got an error per mail (dovecot log) about read-only filesysem as the client was trying to set the Seen flag and dovecot was trying to move the 'new' mail to the 'cur' folder. My test client, mutt, has a 'read_only' option when connecting. This eliminates this issue, but I cannot get everyone to use this archive with a correctly configured mutt. This sent me looking for 'read only' options in other clients. I could hardly find any. I noted that mutt send an EXAMINE and not a SELECT to open the mailbox when in read_only mode and this set me thinking about doing this in another way. Option 3: Dovecot Plugin I started looking into the dovecot plugins. Being more a systems administrator than developer I have cobbled together a working plugin. It nearly does what I want, but not quite, and I don't know why. NOTE: I no longer use the setup that I had to test Options 1 and 2. I thought that this plugin can either be used server-wide or with the 'mail_plugins' userdb option. The plugin forces the MAILBOX_OPEN_READONLY flag in a mailbox_open() call. The plugin returns an error for all mailbox_create() calls. Testing in mutt: - I am unable to delete a mail - I am unable to create a new folder So far so good. However: - I am able to move/copy a mail to an *existing* mailbox (note, the move operation makes the copy but fails to set the 'delete' flag) I do not understand why this works. I have been grep-ing through the source of dovecot and the plugins to find some answer, but without luck. Attached is the full source to my plugin and the Makefile (adapted from Johannes Berg's antispam plugin Makefile) When finished, I will be happy to release this to the dovecot community under the GPL/LGPL or whatever. Regards Chris

3 10

[Dovecot] v2.0.1 released
by Timo Sirainen 24 Aug '10

24 Aug '10

http://dovecot.org/releases/2.0/dovecot-2.0.1.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.1.tar.gz.sig Some small fixes mainly, but since people aren't reporting much bugs for v2.0.0 anymore maybe v2.0.1 release will change that. :) Some of the more important changes since v2.0.0 are: * When dsync is started as root, remote dsync command is now also executed as root instead of with dropped privileges. - IMAP: QRESYNC parameters for SELECT weren't handled correctly. - UTF-8 string validity checking wasn't done correctly (e.g. mailbox names in Sieve fileinto) - dsync: Fixed a random assert-crash with remote dsyncing

1 0

[Dovecot] Live Mirror dovecot / OS X 10.6.4
by Eric Boltz (MMI/UPC) 24 Aug '10

24 Aug '10

I want to set up mirrored postfix/dovecot servers using two mac mini servers (OSX 10.6.4) located in different locations (Canada and the US to be specific) for redundancy. The idea is to have one as the primary MX ("mail.corp.com") and the other as the secondary ("webmail.corp.com"). If the primary goes down clients would revert to webmail until the primary is back up. The plan is to use rsync for this. My challenge, however, is what all I need to rsync to have a "live" backup. Rsync for backup isn't an issue, but I will need to rsync users (system and virtual). Anyone have experience with this? So far it seems that apple puts things in lots of non-standard locations. I suppose I could to a blanket rsync on /var, but that seems a bit much. Thanks in advance.

2 1

[Dovecot] Fully kerberized mail system
by Dr Matthew Williams 24 Aug '10

24 Aug '10

Hello, Is it possible to use Dovecot in a fully kerberized mail system? We have configured authentication via kerberos, now we would like the imap deamon to access a kerberized nfs file system. Has any one any experiences? Regards, Matthew. -- Dr Matthew Williams MEng PhD MBCS Systems Administrator - IT Services - Bangor University Prifysgol Bangor Tel: (44) (0)1248 382414 Adeilad Deiniol Mob: (44) (0)7979 778269 Ffordd Deiniol URL: www.bangor.ac.uk Bangor, Gwynedd LL57 2UX EMail: matthew.williams(a)bangor.ac.uk

2 1

[Dovecot] Messages causing an error from Solr.
by Erik Hetzner 23 Aug '10

23 Aug '10

Hi, I am trying to use the fts_solr plugin, and having some success. Unfortunately some spam messages I had lying around generate an error from Solr, e.g.: HTTP/1.1 400 ParseError at [row,col]:[5,29] Message: An invalid XML character (Unicode: 0xd84e) was found in the element content of the document. While I assume that these messages do indeed contain bad unicode, my searches seem to hang when they get an error back from Solr, causing other problems, so it would be nice if these messages did not cause an error from Solr. I isolated some of these messages and have attached them. I hope that the problematic characters come through properly. I have more messages that cause this problem (sometimes with difference unicode codepoints than the one in the message above), but I don’t want to clog the list up. Thank you for your help. best, Erik Hetzner Config: # 1.2.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-23-generic i686 Ubuntu 10.04.1 LTS log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps login_dir: /usr/local/stow/dovecot-1.2.13/var/run/dovecot/login login_executable: /usr/local/stow/dovecot-1.2.13/libexec/dovecot/imap-login mail_privileged_group: mail mail_plugins: virtual fts fts_solr namespace: type: private separator: / location: maildir:~/Maildir inbox: yes list: yes subscriptions: yes namespace: type: private separator: / prefix: virtual/ location: virtual:~/Maildir_virtual:LAYOUT=maildir++ list: yes subscriptions: yes auth default: passdb: driver: pam userdb: driver: passwd plugin: fts: solr fts_solr: url=http://localhost:8080/solr/ break-imap-search debug

2 6

[Dovecot] PATCH: SQL connect crash
by Leandro Santi 23 Aug '10

23 Aug '10

Hi! Dovecot 2.0.0 auth process seems to crash while attempting to connect to a nonexistent SQL database. A shallow look at the code reveals that NULL module->conn in passdb-sql.c is being erroneously dereferenced while trying to clean up after a failed connection attempt: (gdb) bt #0 0x0806240e in sql_query_callback (result=0x8076c40, sql_request=0x808ff90) at passdb-sql.c:70 #1 0x08069b66 in sqlpool_request_abort (_request=<value optimized out>) at driver-sqlpool.c:114 #2 0x0806ab2a in driver_sqlpool_deinit (_db=0x808b970) at driver-sqlpool.c:448 #3 0x0806970a in sql_deinit (_db=0x808b5bc) at sql-api.c:87 #4 0x0805a3ac in db_sql_unref (_conn=0x807fc60) at db-sql.c:119 #5 0x08062be2 in userdb_deinit (userdb=0x807fc48) at userdb.c:177 #6 0x0804ff4b in auths_deinit () at auth.c:213 #7 0x0805b7bc in main (argc=1474660693, argv=0xec835356) at main.c:160 gdb) print ((struct sql_passdb_module *) _module)->conn $20 = (struct sql_connection *) 0x0 It seems that module->conn for passdb is being zeroed at auth_deinit(), passdb_deinit() completes succesfully but then userdb_deinit() does the illegal access. The following hack seems to eliminate the symptom, however I'd strongly recommend to take a deeper look at the issue. I suspect that a higher level fix would be more appropriate. --- dovecot-2.0.rc6.orig/src/auth/passdb-sql.c 2010-07-21 14:13:29.000000000 +0000 +++ dovecot-2.0.rc6.patched/src/auth/passdb-sql.c 2010-08-18 21:07:05.000000000 +0000 @@ -67,7 +67,7 @@ ret = sql_result_next_row(result); if (ret < 0) { - if (!module->conn->default_password_query) { + if (!module->conn || !module->conn->default_password_query) { auth_request_log_error(auth_request, "sql", "Password query failed: %s", sql_result_get_error(result)); Leandro

2 2

[Dovecot] Authentication woes - Couldn't drop privileges: Mail access not allowed for root
by Ralph Seichter 23 Aug '10

23 Aug '10

I'm currently trying to set up a Dovecot 2.0.0 server for backup purposes. There's an existing server which I successfully migrated to Dovecot 2.0.0, and it uses LDAP for authentication. For the backup server, which will not be exposed to users, I tried both PAM and PASSWD authentication, but all I are syslog entries like these: dovecot: imap-login: Login: user=<foo>, method=PLAIN, rip=[...], lip=[...], mpid=20059, TLS dovecot: imap(foo): Error: user foo: Couldn't drop privileges: Mail access not allowed for root dovecot: imap(foo): Error: Internal error occurred. Refer to server log for more information. Here is my current configuration: # doveconf -n # 2.0.0: /usr/local/dovecot-2.0/etc/dovecot/dovecot.conf # OS: Linux 2.6.35-gentoo-r1-v3 x86_64 Gentoo Base System release 2.0.1 auth_mechanisms = plain login base_dir = /var/run/dovecot/ listen = * mail_location = maildir:~/.maildir passdb { args = scheme=crypt /usr/local/dovecot-2.0/etc/dovecot/passwd driver = passwd-file } protocols = imap ssl_cert = </usr/local/dovecot-2.0/etc/dovecot/server.crt ssl_key = </usr/local/dovecot-2.0/etc/dovecot/server.key The password file contents: # cat /usr/local/dovecot-2.0/etc/dovecot/passwd foo:{CRYPT}xxx:1000:1000:Foo Backup:/home/foo:/bin/bash I searched the Dovecot Wiki and also tried MARC and Google, but I can't seem to find a solution for this problem. Could you please point me in the right direction? I have probably missed something. Thanks! -Ralph

2 5

[Dovecot] Dovecot 2.0 and BSDI 4.X
by The Doctor 23 Aug '10

23 Aug '10

All right, I am trying to migrating to 2.0 but running into problems. from my typescript: Script started on Wed Aug 18 23:24:58 2010 doctor.nl2k.ab.ca//usr/home/doctor$ tail -f /var/log/maillog | egrep dovecot Aug 18 23:25:31 doctor dovecot: master: Dovecot v2.0.0 starting up (core dumps disabled) Aug 18 23:25:31 doctor dovecot: log: Error: net_accept() failed: Invalid argument Aug 18 23:25:31 doctor dovecot: master: Warning: service(anvil): process_limit reached, client connections are being dropped quit ^C doctor.nl2k.ab.ca//usr/home/doctor$ /usr/doc veo cot/sbin/dovecot -n # 2.0.0: /usr/dovecot/etc/dovecot/dovecot.conf # OS: BSD/OS 4.3 i386 auth_cache_negative_ttl = 3600 s base_dir = /var/run/dovecot/ disable_plaintext_auth = no first_valid_uid = 100 listen = * login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c mail_debug = yes mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_log_prefix = %Us(%u): mdbox_rotate_size = 2048 passdb { args = /etc/master.passwd driver = passwd-file } protocols = pop3 imap service auth { executable = /usr/dovecot/libexec/dovecot/auth user = root vsz_limit = 256 } service imap-login { chroot = login client_limit = 256 executable = /usr/dovecot/libexec/dovecot/imap-login inet_listener imaps { address = 204.209.81.1 } process_limit = 128 process_min_avail = 3 service_count = 1 user = dovecot vsz_limit = 64 } service imap { executable = /usr/dovecot/libexec/dovecot/imap process_limit = 512 vsz_limit = 256 } service pop3-login { chroot = login client_limit = 256 executable = /usr/dovecot/libexec/dovecot/pop3-login inet_listener pop3s { address = 204.209.81.1 } process_limit = 128 process_min_avail = 3 service_count = 1 user = dovecot vsz_limit = 64 } service pop3 { executable = /usr/dovecot/libexec/dovecot/pop3 process_limit = 512 vsz_limit = 256 } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_cipher_list = ALL:!LOW:!SSLv2 ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } userdb { args = /etc/passwd driver = passwd-file } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep imap_idle_notify_interval = 120 s imap_logout_format = bytes=%i/%o imap_max_line_length = 65536 mail_max_userip_connections = 10 mail_plugin_dir = /usr/dovecot/lib/dovecot/imap } protocol pop3 { mail_max_userip_connections = 3 mail_plugin_dir = /usr/dovecot/lib/dovecot/pop3 pop3_enable_last = no pop3_lock_session = no pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_no_flag_updates = no pop3_reuse_xuidl = no pop3_save_uidl = no pop3_uidl_format = %08Xu%08Xv } You have new mail in /var/mail/doctor doctor.nl2k.ab.ca//usr/home/doctor$ exit exit Script done on Wed Aug 18 23:26:07 2010 telneting into the ports work, but the clients seem to stuck in an infinite loop. -- Member - Liberal International This is doctor(a)nl2k.ab.ca Ici doctor(a)nl2k.ab.ca God, Queen and country! Never Satan President Republic! Beware AntiChrist rising! http://twitter.com/rootnl2k http://www.facebook.com/dyadallee Australia!! Vote to throw the REpublicans to the sharks!

5 10

[Dovecot] Over-quota bounces seeming to lack sender
by Dave Brenner 23 Aug '10

23 Aug '10

We're seeing an issue with 1.2.12 where over-quota rejection messages are appearing in the logs with <> as the sender. The sender of the original message sees the appropriate sender (postmaster@) on the rejection, but as the message makes its way through the postfix/amavis chain, I can see that the sender address is missing. Aug 20 10:55:56 inet1 amavis[21822]: [ID 702911 mail.info] (21822-05) Checking: rGDWxOHFPBdY <> -> <xxxx(a)toledotel.com> Aug 20 03:12:39 inet1 amavis[9724]: [ID 702911 mail.info] (09724-37) skip local delivery(3): <> -> <bad-header-quarantine> Aug 19 10:15:47 2010 (1570) xxxxxxxx-users: bounce message w/no discernable addresses: <dovecot-1282238146-79394-0@inet1> (that last one is from Mailman logs) Has anyone else run into this? -- Dave Brenner - david(a)toledotel.com The Toledo Telephone Company, Inc.

2 1

[Dovecot] imap, imaps, ports; config for secure-only service
by Ronald Leach 23 Aug '10

23 Aug '10

Hello, having difficulty setting up a 'secure-only' service on a non-standard port. Objective is to open a secure Dovecot service on an internet-visible port, while also using an insecure service for hosts on an internal network (so that one particular client which is not SSL/TLS-capable can continue to use the service). Checking wiki1 and wiki2, I think that port 143 can be used for a service in both encrypted and unencrypted operations. (Wiki2 describes how port 143 can be used with or without STARTTLS.) I've managed to run both TB/Vista, and KMail/Debian on 143 from local machines, and they seem to work fine. (Though they do only work if the clients are set to use 'unencrypted logins' such as KMail's 'clear text' setting, and TB's 'don't use secure authentication'.) Dovecot's SSL certificate on the server expires in 2028. But I cannot get my 'secure-only service' working at all. I've chosen port 10943 for that service, and have been testing from both KMail on the server, and TB/Vista on another local machine. Here's the config: protocol imap { # inet users, and also users presented from offsite via an SSH tunnel, # will use IMAP (any capability) on 143. listen = *:143 # 143 will not be reachable from outside the internal network (except # via an SSH tunnel) # # External users will be allowed only to use port 10943 (as forwarded # from the gateway), and will have to use SSL ssl_listen = *:10943 } Other settings include: #other settings protocols = imap imaps disable_plaintext_auth = no ssl_disable = no ssl_cert_file = /etc/ssl/certs/dovecot.pem ssl_key_file = /etc/ssl/private/dovecot.pem ssl_verify_client_cert = no ssl_cipher_list = ALL:!LOW ssl_require_client_cert = no ssl_username_from_cert = no mail_location = maildir:~/Maildir #log and debug settings mail_debug = yes auth_debug = yes Log from a successful session on port 143: Logs (using port 143, KMail on the server) 14:43:22 auth(default): client in: AUTH^I1^IPLAIN^Iservice=IMAP^Isecured^Ilip=127.0.0.1^Irip=127.0.0.1^Iresp=<hidden> 14:43:22 auth(default): client out: OK^I1^Iuser=ron 14:43:22 auth(default): master in: REQUEST^I1^I4057^I1 14:43:22 auth(default): master out: USER^I1^Iron^Isystem_user=ron^Iuid=1001^Igid=1001^Ihome=/home/ron 14:43:22 IMAP(ron): Effective uid=1001, gid=1001 14:43:22 IMAP(ron): maildir: data=/home/ron/Maildir 14:43:22 IMAP(ron): maildir: root=/home/ron/Maildir, index=/home/ron/Maildir, control=, inbox= 14:43:22 imap-login: Login: user=<ron>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, TLS Unsuccessful session Logs (using 10943, KMail on the server) - absolutely no sign of any authentication, and the client reports a timeout. 17:03:30 imap-login: Disconnected: Inactivity: rip=127.0.0.1, lip=127.0.0.1, TLS handshake 17:04:06 imap-login: Disconnected: rip=127.0.0.1, lip=127.0.0.1, TLS handshake 17:05:08 imap-login: Disconnected: Inactivity: rip=127.0.0.1, lip=127.0.0.1, TLS handshake 143 works fine, so Dovecot is (of course) perfectly good at managing the auth and service, so I must have something wrong in the config. I cannot see it. Could anyone share a config they've used for *secure-only* IMAP service on an internet-visible port? I'd like to compare the settings. regards, Ron

4 3

[Dovecot] Build failure building dbox and gnutls
by Elisamuel Resto 23 Aug '10

23 Aug '10

Hello! I'm having two issues building dovecot, one is with dbox storage, and another building gnutls as the SSL backend (builds fine with openssl). Software versions are Dovecot v2.0.0, GnuTLS 2.8.6 and OpenSSL 1.0.0a Configure: ./configure --prefix=/usr --sysconfdir=/etc/dovecot --localstatedir=/var --libexecdir=/usr/lib --with-moduledir=/usr/lib/dovecot/modules --with-zlib --with-sqlite --with-ssl=openssl --with-ssldir=/etc/ssl --with-gssapi --with-pam --with-bzlib --with-docs --without-mysql --without-vpopmail --without-sia --without-bsdauth --with-libcap --with-ioloop=epoll --with-storages=maildir,mbox,dbox,mdbox For the dbox build error, the log states: libdovecot-storage.so: undefined reference to `dbox_storage' Configure: http://pastie.org/1106301 - Make: http://pastie.org/private/qtt76kxomhmwqwii20oroq Configure: ./configure --prefix=/usr --sysconfdir=/etc/dovecot --localstatedir=/var --libexecdir=/usr/lib --with-moduledir=/usr/lib/dovecot/modules --with-zlib --with-sqlite --with-ssl=gnutls --with-ssldir=/etc/ssl --with-gssapi --with-pam --with-bzlib --with-docs --without-mysql --without-vpopmail --without-sia --without-bsdauth --with-libcap --with-ioloop=epoll For the gnutls build error, the log states quite a few errors, so see the linked logs. Configure: http://pastie.org/1108356 - Make: http://pastie.org/private/dxmmmopnodptut77o6fx2g -- Elisamuel Resto <ryuji(a)codemages.net> http://www.simplysam.us/ - Simply Sam Blog

3 4

[Dovecot] Mobile phone client detects 'PUSH' server
by Ron Leach 22 Aug '10

22 Aug '10

Does Dovecot really provide a 'PUSH' email service? The mobile phone client (standard with SonyEricsson C510, in this case) reported that the server (our Dovecot installation) offered PUSH email service. I hadn't seen that in the documentation that I'd read and had understood the client-server protocol to be a client-PULL service, in that the clients decide which folders to retrieve, and check what messages there are and fetch any new messages. The clients we've used so far have settings for frequency of these checks. I didn't explore the option further, yet, being unsure whether there was a genuine PUSH service from our server or whether the phone was using a proxy somewhere (not ours) which would provide an intermediate fetch/aggregation/'pull then push' service of some sort - perhaps similar to the public offers from Yahoo etc. regards, Ron

2 2

[Dovecot] sieve rule help
by Piyush Joshi 21 Aug '10

21 Aug '10

Dear All, I am using dovecot-2.0.0 version and all my sieve filters are working perfectly except the following one. I am trying to flag message coming from jagdish(a)example.net mail id. require ["fileinto","envelope","reject","vacation","imap4flags","relational","comparator-i;ascii-numeric","regex","body","date"]; if address :contains "From" "jagdish(a)example.net" { keep :flags ["Flagged"] ; } Is it possible to make it work without using addflag to add a flag ?

2 1

[Dovecot] dsync and active-active fault tolerance mail servers
by Luigi Rosa 21 Aug '10

21 Aug '10

I would like to set up an active-active fault tolerance couple of mail servers. Is the following procedure correct? Let's suppose I want to set up two servers for acme.com, mail1.acme.com and mail2.acme.com I declare both servers as MX in DNS configuration. Mailbox are stored in maildir with a single UID/GID owner for all the maildir files Userbase is MySQL, user tables are replicated using MySQL tools; in this case, the replica is one way, that is mail1.acme.com holds the "master" copy of MySQL tables and mail2.acme.com hold the "copy". The replica is done via dsync with a procedure like this executed on mail1.acme.com server: foreach mailbox { dsync mirror mailbox } Where mailbox is the full mail address, used also as a login name for authentication. My goal is to allow users to connect the mail servers they like and have all their mail (a 10/15 minute of sync delay is acceptable). This is the theory, now some questions. 1) Use Linux user/group owner of the files and directories are the same on both hosts (they are both foobar), but have different numeric ID, in one host foobat has UID 1234 and on the other host foobar has UID 2345. Is this an issue? 2) Mail location path is the same on both hosts, but where does dsync get it? Does dsync get all the information from the userbase defined in dovecot.conf (and other included files)? 3) Have I to scan the entire userbase and execute dsync for each user, or is there a trick to do for every user with a single command? 4) How often is good to run the synchronization? 5 minutes? 10? 15? 5) What is the correct command line to invoke dsync in this scenario? 6) Does anyone else tried this? :) Thank you. Ciao, luigi -- / +--[Luigi Rosa]-- \ (1) Everything depends. (2) Nothing is always. (3) Everything is sometimes.

2 2

[Dovecot] sieve_after scripts with virtual domains
by Ciro Scognamiglio 21 Aug '10

21 Aug '10

Hi all, first of all I am new to the list, so hello everyone :) I recently encountered an annoying problem with sieve, I am using dovecot version 1.2.13 on centos 5.5, the packages installed are the following: dovecot-sieve-0.1.17-5.el5 dovecot-managesieve-0.11.11-0_4.el5 dovecot-1.2.13-1_111.el5 the mail server is configured with virtual hosts (mysql), also the sieve plugin and managesieve are active. Users can create their own filters through roundcube and everything works fine. I also put two script to be executed before all sieve scripts in sieve_before, they just move any SPAM or VIRUS tagged message to a Junk folder. The problem is that while this works for my domain (that is also the server domain) it doesn't for the others domains, it seems the sieve_before scripts get ignored. I made many tests with the domains I am hosting, if I send a spam message (I am using the spamassassin test messages) it gets marked as SPAM, but gets only moved to the junk folder if the recipient is @cslash.net (that is my domain). here is some config extracts: === dovecot.conf === plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_before = /srv/mail/sieve-before sieve_after = /srv/mail/sieve-after } ======= /srv/mail $ cat sieve-before/spam.sieve require "fileinto"; if header :contains "X-Spam-Flag" "YES" { fileinto "Junk"; } P.S. The sieve scripts are all compiled.

1 0

[Dovecot] pigeonhole sieve imapflags bug
by Tim Traver 21 Aug '10

21 Aug '10

Hi all, ok, I just instealled the dovecot 2.0.0 release, and the latest mercurial pigeonhole source. All is well, except for a particular sieve rule that may not be working right. It is a simple rule that looks like this : require ["fileinto","imap4flags"]; # rule:[Past Due Notices] if allof (header :contains "Subject" "Account Past Due Notice") { fileinto "Billing"; setflag "\\Seen"; stop; } Anyways, what happens is the message that matches that rule does indeed get moved to the "Billing" folder, but it does not get marked as read. BUT! if I change the order of the actions to mark it as read first, then move it to the "Billing" folder, it does both of those actions... Is that the way it is supposed to work? or is that a bug? Thanks, Tim.

3 2

[Dovecot] Logged out format in log
by Jerrale G 21 Aug '10

21 Aug '10

I was naive to not check the log more thoroughly for changes. I need "dovecot: imap(jerrale(a)sheltoncomputers.com): Disconnected: Logged out bytes=1921/2983" to say the rip (ip address) as 1.2.x did; how do I accompish such? Jerrale G SC Senior Admin SC Senior Admin

2 2

[Dovecot] Mobile phone client - first access
by Ron Leach 20 Aug '10

20 Aug '10

Ladies and gentlemen, good morning! With my first post to the list, may I begin by saying how impressed I have been by Dovecot's performance on our Debian server. We've configured it to run with Exim and Fetchmail, using Dovecot to manage professional and domestic emails for a small home office, serving a number of Windows and Linux clients both on the internal network and, when working overseas, via SSH tunnels back to the Debian server. Dovecot's performance has been, simply, rock-solid; a very impressive piece of work by Timo and all those supporting him. My ordinary mobile phone - a Sony Ericsson C510 - includes an email client with IMAP capability (and none, TLS, or SSL encryption). Configured to access our server across the mobile carrier's network, the results surprised me; they were not what I expected. The first surprise was, it worked. More seriously, the messages it retrieved were not what I expected; the phone received around 58 messages, but from the 'inbox', the 'junk' box, and a couple from a 'project' box. I had expected to only retrieve the messages that were in the 'inbox'. How does Dovecot 'decide' what messages to give the phone client? [I think I may have the wrong 'mental model' of what should have happened, and would appreciate being put right.] Is it possible to configure Dovecot to only serve specific boxes? The mobile phone client is extremely simple - it does not have the facility to 'browse' the folders, it only has an inbox, sentbox, etc; I have wondered whether there might be a 'jar' email client that is richer, and which might help - I will look for something anyway. But I was impressed that my mobile phone could check our home and office email while offsite; if I can get that working it will save having to fire up the laptop at each opportunity. Thanks very much for reading this far, and, also, thanks everyone who takes the time to contribute to the list, regards, Ron

3 5

[Dovecot] Director mailserver health monitoring script
by Brad Davidson 20 Aug '10

20 Aug '10

Timo et al; The last bit of functionality that the Dovecot director is missing compared to our existing load balancers is mailserver health monitoring. As I understand it, if a mailserver goes down, Dovecot does not take any action to route connections around the offline node, and will keep trying to proxy clients to it. Since we're hoping to cut over to Directors soon, but don't want to lose any functionality, I've hacked up a script that: * Polls the local director for a list of mailservers * Performs health checks against a list of ports on each mailserver * Disables or enables mailservers (by altering the vhost count) as necessary I've published the script on github in hopes that it might be useful to others: http://github.com/brandond/poolmon/ Maybe someday Dovecot will do something like this internally and I won't need the script any more, but for now I'm pretty happy with it. -Brad

2 2

[Dovecot] Weird Problem with subscriptions
by Harry Lachanas 20 Aug '10

20 Aug '10

Dovecot Version 1.2.11 Created Public Namespaces and folders idx and control are created in each users Maildir/ aka namespace public { prefix=Public/ separator = / location = maildir:/home/Public-Folders-Mail/Public-RO:INDEX=~/Maildir/p1-idx:CONTROL=~/Maildir/p1-ctrl hidden = no subscriptions = no inbox = no } The problem occurs after a user has subscribed to The Folder dovecot complaints about ... dovecot: IMAP(grharry): open(/home/grharry/Maildir/p1-idx/.production/dovecot.index.log) failed: Permission denied (euid=1004(grharry) egid=1000(vmail) missing +x perm: /home/grharry/Maildir/p1-idx/.production) After changing manually the perm in the above dir +x all works fine. I've tried unsubscribing and deleting the p1-ctl p1-idx dir structures The same problem occured ( This hapens in the users own Maildir ) Your help will be appreciated Regards Harry

2 3

[Dovecot] Disable APOP challenge in POP3 login greeting
by Brad Davidson 19 Aug '10

19 Aug '10

Timo, It looks like Dovecot 2.0 appends an APOP challenge to the POP3 greeting even if APOP is not an enabled auth mechanism. Is there any way to disable this? We don't support APOP, and the challenge includes the private hostname of the server, which we'd rather not have in the banner. It looks like get_apop_challenge in 1.2 returns NULL if APOP isn't supported, which causes auth_client_ready to omit the banner... but I see no such check (in fact, no way for get_apop_challenge to return NULL) in 2.0, even though pop3_client_send_greeting tests for it. Thanks, -Brad

2 2

[Dovecot] mailbox utilities
by Terry 19 Aug '10

19 Aug '10

Hello, Are there any utilities that will spit out statistics about some mailboxes I have on my server? For example, how many messages are in each mailbox? They appear to be in mbox format (default?). Thanks!

2 1

Re: [Dovecot] mailbox utilities
by Kádár Tamás 19 Aug '10

19 Aug '10

P.S. It's not *exactly* what you are looking for -- but it can still spit you out some useful and semi-related statistics. -----Original Message----- From: "Kádár Tamás" tamas.kadar(a)espell.com Date: Thu, 19 Aug 2010 19:37:01 To: <dovecot(a)dovecot.org> Reply-To: tamas.kadar(a)espell.com Subject: Re: [Dovecot] mailbox utilities If you happen to use Postfix, you can use pflogsumm which is crude, but works. ------Original Message------ From: Terry Sender: dovecot-bounces+tamas.kadar=espell.com(a)dovecot.org To: dovecot(a)dovecot.org Subject: [Dovecot] mailbox utilities Sent: Aug 19, 2010 21:25 Hello, Are there any utilities that will spit out statistics about some mailboxes I have on my server? For example, how many messages are in each mailbox? They appear to be in mbox format (default?). Thanks!

1 0

Re: [Dovecot] mailbox utilities
by Kádár Tamás 19 Aug '10

19 Aug '10

If you happen to use Postfix, you can use pflogsumm which is crude, but works. ------Original Message------ From: Terry Sender: dovecot-bounces+tamas.kadar=espell.com(a)dovecot.org To: dovecot(a)dovecot.org Subject: [Dovecot] mailbox utilities Sent: Aug 19, 2010 21:25 Hello, Are there any utilities that will spit out statistics about some mailboxes I have on my server? For example, how many messages are in each mailbox? They appear to be in mbox format (default?). Thanks!

1 0

[Dovecot] dovecot 1.2 and quota_rules from AD
by Christian Lyra 19 Aug '10

19 Aug '10

Hi I´m trying to figure how to proper configure postfix+dovecot to enforce quotas from a AD (ldap). I´m using the following configuration: dovecot.conf: ... protocol lda { mail_plugins = quota .. } auth default { passdb ldap { args = /etc/dovecot/dovecot-ldap-pass.conf } userdb ldap { args = /etc/dovecot/dovecot-ldap.conf } ... } plugin { quota = maildir:User quota #quota_rule = *:storage=2M // tried with and without this line } dovecot-ldap.conf: ... user_attrs = sAMAccountName=mail=maildir:/var/vmail/%$/Maildir, quotaMail=quota_rule=*:storage=%$ user_filter = (&(objectClass=person)(|(mail=%u)(sAMAccountName=%u))) pass_attrs = sAMAaccountName=user,userPassword=password pass_filter = (&(objectClass=person)(sAMAaccountName=%u)) Quotas are set by the quotaMail in AD. And here is the log: Aug 9 11:41:37 vm29 dovecot: auth(default): master in: USER#0111#011testeti(a)teste.mydomain#011service=deliver Aug 9 11:41:37 vm29 dovecot: auth(default): ldap(testeti(a)teste.mydomain): user search: base=dc=mydomain scope=subtree filter=(&(objectClass=person)(| (mail=testeti@teste.mydomain)(sAMAccountName=testeti@teste.mydomain))) fields=sAMAccountName,quotaMail Aug 9 11:41:37 vm29 dovecot: auth(default): ldap(testeti(a)teste.mydomain): result: sAMAccountName(mail=maildir:/var/vmail/%$/Maildir)=maildir:/var/vmail/testeti/Maildir Aug 9 11:41:37 vm29 dovecot: auth(default): master out: USER#0111#011testeti@teste.mydomain#011mail=maildir:/var/vmail/testeti/Maildir Aug 9 11:41:37 vm29 dovecot: deliver(testeti(a)teste.mydomain): auth input: mail=maildir:/var/vmail/testeti/Maildir Aug 9 11:41:37 vm29 dovecot: deliver(testeti(a)teste.mydomain): Quota root: name=User quota backend=maildir args= Aug 9 11:41:37 vm29 dovecot: deliver(testeti(a)teste.mydomain): maildir: data=/var/vmail/testeti/Maildir Aug 9 11:41:37 vm29 dovecot: deliver(testeti(a)teste.mydomain): maildir++: root=/var/vmail/testeti/Maildir, index=, control=, inbox=/var/vmail/testeti/Maildir Aug 9 11:41:37 vm29 dovecot: deliver(testeti(a)teste.mydomain): Namespace : Using permissions from /var/vmail/testeti/Maildir: mode=0700 gid=-1 Aug 9 11:41:37 vm29 dovecot: deliver(testeti(a)teste.mydomain): msgid=<201008091142.53089.lyra(a)pop-pr.rnp.br>: saved mail to INBOX There´s no quota_rule in logs... uncomenting the line quota_rule = *:storage=2M I got quota, bu only this static one, and not per-user. What I´m doing wrong? Btw... with static configuration the maildirsize file is created, but without static configuration it´s not (well.. no quota_rule...). thanks in advance, -- Christian Lyra POP-PR - RNP

2 3

[Dovecot] pigeonhole and utf-8 error
by Xavier Pons 19 Aug '10

19 Aug '10

Hi, now, I'm working with the last version of dovecot and pigeonhole sieve, and when apply a sieve filter on a new message, and it try to move this mail to a folder with special character like accent give me the error 'mailbox name not utf-8: ...' >Aug 17 09:22:40 imap1 dovecot: lmtp(19629,miel): Error: kea6K484akytTAAAJBW4rA: sieve: msgid= ><1099311971.505.1282029699154.JavaMail.open-xchange(a)o.uib.es>: failed to store into mailbox 'atenció': >mailbox name not utf-8: atenció dovecot it's working without problem on this folder. I suppose it's a misconfiguration, but I don't find where... Xavier

4 10

[Dovecot] Dovecot lda with qmail
by Piyush Joshi 19 Aug '10

19 Aug '10

Dear All, According to my setup i can not call |/var/qmail/bin/preline -f /usr/local/libexec/dovecot/dovecot-lda from my /var/qmail/control/defaultdelivery file, Instead making a perl file which will call the same for delivery of mails. If i put the following code in my mail.pl |/var/qmail/bin/preline -f /usr/local/libexec/dovecot/dovecot-lda then it throws error in running file from command line. Warning: Use of "-f" without parentheses is ambiguous at /var/qmail/bin/mail.pl line 2. syntax error at /var/qmail/bin/mail.pl line 2, near "|" Execution of /var/qmail/bin/mail.pl aborted due to compilation errors. content of mail.pl #!/usr/bin/perl |/var/qmail/bin/preline -f /usr/local/libexec/dovecot/dovecot-lda Any help will be useful for me. Thanks

2 1

[Dovecot] EVERYONE USING DOVECOT PLEASE SIGN: Thanks, Administrators of Dovecot!
by Jerrale G 19 Aug '10

19 Aug '10

With the release of dovecot 2.0, the community of the Dovecot mailling list, and us at Shelton Computers, would sincerely like to thank the developers of Dovecot. For, if it were not for you, we would be stuck with Courier and would not have the impressive features of Sieve, as opposed to the unmanageable scripts, by end users, of maildrop. *Our gratitude goes to, but not limited to:* *Timo Sirainen and Charles Marcus* *We apologize if we have missed anyone and ask that EVERYONE using dovecot would express their thanks and gratitude by signing this thread, to also include any people beyond the mentioned.* Please, Mr. Sirainen, make a donation link as we have tried to find one on dovecot.org! Sincerely, Jerrale Gayle, Senior Technical Admin of Shelton Computers

16 20

[Dovecot] dovecot-lda logging
by Nishant Limbachia 19 Aug '10

19 Aug '10

Hi everyone, I'm using Postfix and Dovecot with dovecot-lda used for local delivery. I've successfully migrated from 1.2.13 to 2.0.0 however I have a little problem with dovecot-lda logging. With version 1.2.13, I use to log dovecot-lda to /var/log/dovecot-lda.log with world-writable mode. With version 2.0.0, postfix complains: "Can't open log file /var/log/dovecot.log: permission denied". This is understandable because my dovecot.log file is 0600 mode. My question is how do I retain the 1.2.13 functionality of logging dovecot-lda to /var/log/dovecot-lda.log. I've read the LDA.txt in the wiki documentation and it states I can override log_path & info_log_path like this: protocol lda { log_path = /var/log/dovecot-lda.log info_log_path = /var/log/dovecot-lda.log } What I don't know is where to add that segment. Should I add it to 10-logging.conf or 15-lda.conf? Right now I've added that to both the files but I still see the postfix permission denied message. I will appreciate if someone can help out. Thanks! BTW, Great work Timo!!! Thank you very much for a great piece of software!

2 4

[Dovecot] Linux should be as easy as Windows
by Dennis Clarke 18 Aug '10

18 Aug '10

>From a "Standards" thread I saw this : "Linux should be as easy as Windows" I would like to point out that this is a thinking problem. A shift in thinking is required. That should say : "Open source and Free software should be as easy as Windows" In this way we allow someone running BSD, Solaris or some port of Debian to an old Dec AlphaServer will have the same level of functionality provided standards are adhered to. Once programmers begin to see everything in the light of Linux then we can also kiss goodbye the opportunity for portability to other OS types. Dennis

10 12

[Dovecot] Pigeonhole: error while loading shared libraries
by Sebastian Köhler 18 Aug '10

18 Aug '10

Hi, I built pigeonhole from the hg repo for Dovecot 2.0. Local sieve scripts work fine. But as soon as I try to connect via managesieve I get this errror: managesieve-login: Error: dovecot/managesieve-login: error while loading shared libraries: libdovecot-login.so.0: cannot open shared object file: No such file or directory My dovecot install is in /usr/lib/dovecot and I had to symlink the libs in the dovecot folder to /usr/lib to make managesieve work. My configure options were: "--prefix=/usr --with-dovecot=/usr/lib/dovecot" Sebastian -- The best thing about a boolean is even if you are wrong, you are only off by a bit.

2 4

[Dovecot] OT [Fwd: Fwd: Re: EVERYONE USING DOVECOT PLEASE SIGN: Thanks, Administrators of Dovecot!]
by Noel Butler 18 Aug '10

18 Aug '10

CharlesMarcus LOL, you kinda contradicted yourself here charlie boy and personal RBL? yup, but its not just used by me, its used by a few if you read the link, a few involving millions of emails a day, but shouldnt be a problem giving the geographical locations... and lied? list msgs caught in spam rules, I guess you dont know how to configure SA URI's... now, please stop trying to avoid bans or i shall notify your isp you have violated their T%C ------- Forwarded Message -------- From: Charles <libertytrek(a)gmail.com> To: noel.butler(a)ausics.net Subject: Fwd: Re: [Dovecot] EVERYONE USING DOVECOT PLEASE SIGN: Thanks, Administrators of Dovecot! Date: Wed, 18 Aug 2010 07:52:35 -0400 So, you're a liar as well. You lied when you said my messages were getting caught in your anti-spam filter. They weren't, they were getting blocked by your silly little personal rbl. If you weren't blocking list traffic, you would have seen that I already corrected the record on that myself. Don't bother replying - I won't be rejecting your messages on this account, I just give them the attention they deserve (straight to the shit-can).

3 2

[Dovecot] Unexpectedly lost message
by Tom Goerger 18 Aug '10

18 Aug '10

Hi, We're having some issues with certain messages not being able to be read by Dovecot. Can anyone tell me under what conditions the error messages below could be caused? Aug 17 15:58:26 server.tc.umn.edu imap(user): : [ID 887855 local6.error] Next message unexpectedly lost from 1913995 Aug 17 15:58:26 server.tc.umn.edu last message repeated 2 times Aug 17 15:58:26 server.tc.umn.edu imap(user): : [ID 107833 local6.crit] Panic: file istream.c: line 76: assertion failed: (_stream->skip != _stream->pos) Aug 17 15:58:26 server.tc.umn.edu dovecot: [ID 684838 local6.error] child 13169 (imap) killed with signal 6 Thanks, -- Tom Goerger University of Minnesota - Internet Services

2 1

[Dovecot] rare index cache error with dovecot 1.2.10
by Wolfgang.Friebel＠desy.de 18 Aug '10

18 Aug '10

Hi, since some time for a single user updating the Maildir/dovecot.index.cache file produced errors whenever it needed to be updated: Aug 15 04:16:40 imapsrv dovecot: deliver(user): pwrite() failed: File too large Aug 15 04:16:40 imapsrv dovecot: deliver(user): file_set_size() failed with index cache file /var/spool/mail/mamuzic/Maildir/dovecot.index.cache: File too large The file itself was 55115776 bytes and a test program using pwrite with any reasonable size or offset does not produce the EFBIG error. Looking to the file contents the start of the file looks correct to me ( according to src/lib-index/mail-cache-private.h ) and despite of the error message the file gets updated and contains always the headers of the most recent incoming mail near the end of the file. After removing the file the cache was rebuilt properly (currently at 9MB). As this happened only for a single user out of approx 500 and after more than one year of using dovecot without any other problems I guess this is a very rare case. As pwrite tests do not show the error this seems not to be an issue with low file limits (as suggested in another mail on this topic) but maybe a lookup of corrupt addresses from the index.cache. I have saved the dovecot.index.cache, but as it is rather large (55MB) and does contain a lot of privacy information I would rather not make it accessible. Is there something I can further check to see whether dovecot is missing a sanity check? -- Wolfgang Friebel Deutsches Elektronen-Synchrotron DESY Phone/Fax: +49 33762 77372/216 Platanenallee 6 Mail: Wolfgang.Friebel AT desy.de D-15738 Zeuthen Germany

2 1

[Dovecot] REpeated e-mail
by The Doctor 18 Aug '10

18 Aug '10

Using 1.2.11 I am getting some people repeating that they are getting repeated POP3 e-mails. My configuration is # 1.2.11: /usr/dovecot/etc/dovecot.conf # OS: BSD/OS 4.3 i386 base_dir: /var/run/dovecot/ protocols: pop3 pop3s imap imaps ssl_listen: 204.209.81.1 ssl_cipher_list: ALL:!LOW:!SSLv2 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/dovecot/libexec/dovecot/imap-login login_executable(imap): /usr/dovecot/libexec/dovecot/imap-login login_executable(pop3): /usr/dovecot/libexec/dovecot/pop3-login mail_max_userip_connections(default): 10 mail_max_userip_connections(imap): 10 mail_max_userip_connections(pop3): 3 first_valid_uid: 100 mail_location: mbox:~/mail:INBOX=/var/mail/%u dbox_rotate_days: 0 mail_executable(default): /usr/dovecot/libexec/dovecot/imap mail_executable(imap): /usr/dovecot/libexec/dovecot/imap mail_executable(pop3): /usr/dovecot/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/dovecot/lib/dovecot/imap mail_plugin_dir(imap): /usr/dovecot/lib/dovecot/imap mail_plugin_dir(pop3): /usr/dovecot/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_no_flag_updates(default): no pop3_no_flag_updates(imap): no pop3_no_flag_updates(pop3): yes pop3_enable_last(default): no pop3_enable_last(imap): no pop3_enable_last(pop3): yes pop3_save_uidl(default): no pop3_save_uidl(imap): no pop3_save_uidl(pop3): yes pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: executable: /usr/contrib/libexec/dovecot/dovecot-auth passdb: driver: passwd-file args: /etc/master.passwd userdb: driver: passwd userdb: driver: passwd-file args: /etc/passwd -- Member - Liberal International This is doctor(a)nl2k.ab.ca Ici doctor(a)nl2k.ab.ca God, Queen and country! Never Satan President Republic! Beware AntiChrist rising! http://twitter.com/rootnl2k http://www.facebook.com/dyadallee Australia!! Vote to throw the REpublicans to the sharks!

3 2

[Dovecot] Error: Index file too large ? 904 bytes ?
by Dennis Clarke 18 Aug '10

18 Aug '10

My 1.2.13 build is giving me errors based on the same conf file that was working perfectly for 1.2.12 : Aug 18 03:28:27 IMAP(dclarke): Error: Index file too large: /var/mail/dclarke/dovecot.index Aug 18 03:28:27 IMAP(dclarke): Fatal: block_alloc(2147483648): Out of memory Aug 18 03:28:27 dovecot: Error: child 12560 (imap) returned error 83 (Out of memory - see mail_process_size setting) The file in question is 904 bytes in size : bash-4.1# ls -l /export/home/dclarke/mail/.Sent/dovecot.index -rw------- 1 dclarke csw 904 Aug 4 16:05 /export/home/dclarke/mail/.Sent/dovecot.index So this seems insane. SO I made sure the conf file had this in it : mail_process_size = 256 I then restart the daemon and see this : Aug 18 03:37:02 IMAP(dclarke): Fatal: block_alloc(1073741824): Out of memory Aug 18 03:37:02 dovecot: Error: child 12620 (imap) returned error 83 (Out of memory - see mail_process_size setting) Aug 18 03:37:07 IMAP(dclarke): Error: Index file too large: /export/home/dclarke/mail/.Sent/dovecot.index Aug 18 03:37:07 IMAP(dclarke): Warning: Created dotlock file's timestamp is different than current time (837089755 vs 1282102627): /export/home/dclarke/mail/.Sent/dovecot-uidlist Aug 18 03:37:07 IMAP(dclarke): Fatal: block_alloc(1073741824): Out of memory Aug 18 03:37:07 dovecot: Error: child 12622 (imap) returned error 83 (Out of memory - see mail_process_size setting) Aug 18 03:37:09 IMAP(dclarke): Error: Index file too large: /export/home/dclarke/mail/.Sent/dovecot.index Aug 18 03:37:09 IMAP(dclarke): Warning: Created dotlock file's timestamp is different than current time (527779909 vs 1282102629): /export/home/dclarke/mail/.Sent/dovecot-uidlist Aug 18 03:37:09 IMAP(dclarke): Fatal: block_alloc(1073741824): Out of memory Aug 18 03:37:09 dovecot: Error: child 12624 (imap) returned error 83 (Out of memory - see mail_process_size setting) Sure enough dovecot catches a timestamp issue : bash-4.1# date Wed Aug 18 03:39:24 GMT 2010 bash-4.1# ls -lapE /export/home/dclarke/mail/.Sent/dovecot-uidlist -rw------- 1 dclarke csw 1806 2010-08-16 13:52:16.442510077 +0000 /export/home/dclarke/mail/.Sent/dovecot-uidlist bash-4.1# touch /export/home/dclarke/mail/.Sent/dovecot-uidlist bash-4.1# ls -lapE /export/home/dclarke/mail/.Sent/dovecot-uidlist -rw------- 1 dclarke csw 1806 2010-08-18 03:39:53.263345256 +0000 /export/home/dclarke/mail/.Sent/dovecot-uidlist However the inability to deal with a 904 byte file is a bit of an issue here. Anyone know why mail_process_size = 256 is the wrong thing to look at ? Dennis

2 2

[Dovecot] Extension for sorting mails by Displayname
by Michael Kliewe 18 Aug '10

18 Aug '10

Hi everybody, first of all, thanks Timo for version 2.0. Currently I want to sort mails server-side by displayname of FROM and TO. There is an extension for it, but I think dovecot does not support it at the moment. It is defined in RFC 5957: https://www.tools.ietf.org/html/rfc5957 Is there an dovecot extension for it, how can I get that running? Michael

2 2

Re: [Dovecot] wake up getamail on imap request
by Timo Sirainen 18 Aug '10

18 Aug '10

On Wed, 2010-08-18 at 14:28 +0200, Peter Dungel wrote: > The only issue I'm still facing is, that I don't like to run getmail as a > cronjob that connects to my online mailboxes every minute or so, I'd rather > want it to do so every thirty minutes and whenever I request so by fetching > my mails at my mailclient (e.g. outlook), I've font the Fetchmail Wakeup > plugin, but according to the description this only works for version 1.1.x > and 1.2.x but I'm running 1.0.13. You could create a plugin that triggers getmail every time IMAP's STATUS command is sent. Or probably best to do it on mailbox_opened hook (in v2.0).

1 0

Re: [Dovecot] wake up getamail on imap request
by William Blunn 18 Aug '10

18 Aug '10

On 18/08/2010 13:28, Peter Dungel wrote: > i've set up a little mailserver for my homeoffice, and after some > problems everything works fine for me, I've some virtual users which > get their mail delivered via getmail, and I can access my mails from > my windows mailclient. > > The only issue I'm still facing is, that I don't like to run getmail > as a cronjob that connects to my online mailboxes every minute or so, > I'd rather want it to do so every thirty minutes and whenever I > request so by fetching my mails at my mailclient (e.g. outlook), I've > font the Fetchmail Wakeup plugin, but according to the description > this only works for version 1.1.x and 1.2.x but I'm running 1.0.13. > > Anyone has any idea how to solve this or has a workaround? Upgrade to 1.1.x or 1.2.x? I believe that many people consider 1.0.x to be hideously ancient. I believe that many people on this list will be significantly reluctant to help you with anything before 1.2.x. Version 2.0.0 was declared the current release version last Monday (16 Aug 2010), with the previous current release version before that being 1.2.13. I believe that many people on this will not consider "But My Distro Provides Version X!" to be a valid excuse. Find a more up-to-date binary package, upgrade your distro, install from source; there is always a way. Bill

1 0

[Dovecot] wake up getamail on imap request
by Peter Dungel 18 Aug '10

18 Aug '10

Hi, i've set up a little mailserver for my homeoffice, and after some problems everything works fine for me, I've some virtual users which get their mail delivered via getmail, and I can access my mails from my windows mailclient. The only issue I'm still facing is, that I don't like to run getmail as a cronjob that connects to my online mailboxes every minute or so, I'd rather want it to do so every thirty minutes and whenever I request so by fetching my mails at my mailclient (e.g. outlook), I've font the Fetchmail Wakeup plugin, but according to the description this only works for version 1.1.x and 1.2.x but I'm running 1.0.13. Anyone has any idea how to solve this or has a workaround? Thanks Petr

1 0

[Dovecot] Upgrade to 2.0 - Not so smooth
by Marc Perkel 18 Aug '10

18 Aug '10

Starting Dovecot Imap: Fatal: service(pop3-login) User doesn't exist: dovenull Just some real time feedback. I don't know what dovenull user is or why it is necessary.

14 25

[Dovecot] Problem with compile
by Mišel Mešnjak 18 Aug '10

18 Aug '10

Hi! I have a problem compiling v2.0 of dovecot mail server on one old server running RHEL 3. This is error messaage I get (googled for it and have not found anything useful): passdb-vpopmail.o(.text+0x39a): In function `vpopmail_preinit': /root/dovecot-2.0.0/src/auth/passdb-vpopmail.c:185: undefined reference to `vauth_load_module' collect2: ld returned 1 exit status make[3]: *** [auth] Error 1 make[3]: Leaving directory `/root/dovecot-2.0.0/src/auth' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/root/dovecot-2.0.0/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/root/dovecot-2.0.0' make: *** [all] Error 2 Can someone point me in the right direction? Thanks and bye!

3 2

[Dovecot] Delete user data from Dovecot server
by Thiago Henrique 18 Aug '10

18 Aug '10

Hello, I'm testing Dovecot 2.0. I plan to use Dovecot 2.0 with thousands of domains per server. My user base is under virtual MySQL. when I add a user in the database, it is automatically created in the structure of Dovecot at first login. Is there a easy way to delete a user ? Thank you. -- Atenciosamente, Thiago Henrique (21)2233-5950 ramal 27 Infra Estrutura Linux Hostnet Internet - www.hostnet.com.br Digirati Telecomunicações - www.digirati.com.br

3 2

[Dovecot] reverting back to 1.2.12
by Dennis Clarke 18 Aug '10

18 Aug '10

ver 1.2.13 is also tossing these : Aug 18 03:37:49 dovecot: Warning: I/O leak: 805c600 (27) Aug 18 03:37:49 dovecot: Warning: I/O leak: 805c600 (25) Aug 18 03:37:49 dovecot: Warning: I/O leak: 805c600 (23) I have reverted back to 1.2.12 which "just works". I will go back and recompile 1.2.13 and 2.0.0 again. Maybe the addition of postgressql libs linked in or the use of GCC is the issue on Solaris. Not sure but 1.2.12 to 1.2.13 did not go smoothly at all. Dennis

1 0

[Dovecot] pigeonhole
by Xavier Pons 18 Aug '10

18 Aug '10

Hi, I'm trying to compile the last mercurial release of dovecot-pigeonhole 2.0 and get this error: gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -I/usr/kerberos/include -o .libs/sievec sievec.o -Wl,--export-dynamic ../../src/lib-sieve/.libs/libdovecot-sieve.so ../../src/lib-sieve-tool/.libs/libsieve-tool.a ./debug/.libs/libsieve_ext_debug.a /root/dovecot/dovecot-hg/dovecot-2.0/src/lib-storage/.libs/libdovecot-storage.so /root/dovecot/dovecot-hg/dovecot-2.0/src/lib-lda/.libs/libdovecot-lda.so /root/dovecot/dovecot-hg/dovecot-2.0/src/lib-dovecot/.libs/libdovecot.so -ldl -lrt -Wl,--rpath -Wl,/usr/lib/dovecot ../../src/lib-sieve/.libs/libdovecot-sieve.so: undefined reference to `sieve_stringlist_get_length' ../../src/lib-sieve/.libs/libdovecot-sieve.so: undefined reference to `sieve_stringlist_read_all' ../../src/lib-sieve/.libs/libdovecot-sieve.so: undefined reference to `sieve_single_stringlist_create_cstr' collect2: ld returned 1 exit status make[4]: *** [sievec] Error 1 any idea? thanks Xavier

4 6

[Dovecot] 2.0 and vpopmail
by Jason 'XenoPhage' Frisvold 18 Aug '10

18 Aug '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, Does 2.0 require a specific version of vpopmail? I'm getting this on my build attempt : /usr/src/redhat/BUILD/dovecot-2.0.0/src/auth/passdb-vpopmail.c:185: undefined reference to `vauth_load_module' Yes, it's an RPM, that's how I roll. I'm not finding vauth_load_module anywhere on my system.. I'm running vpopmail 5.4.30 which is, I believe the latest stable release.. Thanks, - --------------------------- Jason 'XenoPhage' Frisvold xenophage(a)godshell.com - --------------------------- "Any sufficiently advanced magic is indistinguishable from technology." - - Niven's Inverse of Clarke's Third Law -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.14 (Darwin) iEYEARECAAYFAkxp/6YACgkQ8CjzPZyTUTT0tACgi5WLR2IcGvhmvmIGlmZpeg1P tUQAn2zx6HuIR3QHIGt/aYCP7nRNBvJ7 =yYrj -----END PGP SIGNATURE-----

2 2

[Dovecot] Using dovecot with vpopmail and mysql auth?
by Aaron Greengrass 18 Aug '10

18 Aug '10

Hi, Does anyone happen to know the right strings to do authentication against mysql storing vpopmail data, vs using the vpopmail auth module? I'm trying to get up to both vpopmail 5.5, and dovecot 2.0, and dovecot-auth seems to reliably segfault on the 5.5 vpopmail module. I've tried downgrading vpopmail as well, with less than stellar results. I saw an old article about doing exactly that -- switching from the vpop module, while still using it's DB, but it is both a) old, and b) confusing. Any help you can offer -- or urls in a pinch -- would be appreciated.

1 1

[Dovecot] Very complex Master User Examples using MySQL
by Marc Perkel 17 Aug '10

17 Aug '10

For those who are interested I have posted in the Wiki examples of using master users in very interesting ways. In these example we will create 3 kinds of master users. The first will be users who can read all email for all domains. The next example will be users who can read all email for their domain only. The third example will be users who can read email of domains listed in a separate ownership table. http://wiki2.dovecot.org/Authentication/MasterUsers Go to Advanced SQL Examples at bottom Let me know what you think. In order to actually make this work you'll have to apply this patch Timo just posted: http://hg.dovecot.org/dovecot-2.0/rev/3ba227176cde

1 0

[Dovecot] dovecot 2.0 convert script
by Marc Perkel 17 Aug '10

17 Aug '10

Since my old config had this: protocols = imap imaps pop3 pop3s ssl_cert_file = /usr/share/ssl/certs/imapd.pem ssl_key_file = /usr/share/ssl/certs/imapd.pem then the convert script should have added ssl = yes Just trying to document all the little issues as I find them.

4 5

[Dovecot] Tricky Master User Query - need MySQL help
by Marc Perkel 17 Aug '10

17 Aug '10

OK - I want to do something very tricky with master users and if I get it to work I'm adding it to the wiki for everyone to use. So far I have a MySQL database that servers multiple domains. I can set a flag making someone a domain owner that allows that person to become master of that domain. Here's the query for that. password_query = SELECT user_name, domain_name, password FROM users WHERE user_name = '%n' AND domain_name = '%d' AND owns_domain='1' AND '%d'='%{login_domain}' So - here's where we get tricky. I have another table called "ownership" where I have 2 fields which is a pairing of email addresses (login_id) and domains owned (owned_object). Data might look like this: joe(a)blow.com domain1.com joe(a)blow.com domain2.com Since joe(a)blow.com owns both domain1.com and domain2.com I want him to be able to log in as anyone in those 2 domains as a master user. Examples: tom@domain1.com*joe@blow.com harry@domain2.com*joe@blow.com So the idea is to create a MySQL query so that if the master user matches the domain part of the login user then it returns true and allows the login. What MySQL query will do that?

1 0

[Dovecot] Master Login using MySQL problem - %{login_domain}
by Marc Perkel 17 Aug '10

17 Aug '10

Hi Timo, Been trying to track this problem down further. The problem seems to be related to verifying the master user failing. My passdb looks like this: passdb { driver = sql args = /etc/dovecot/dovecot-domain-owner-sql.conf master = yes pass = yes } dovecot-domain-owner-sql.conf contains: user_query = SELECT user_name, domain_name FROM users WHERE user_name = '%n' AND domain_name = '%d' AND owns_domain='1' password_query = SELECT user_name, domain_name, password FROM users WHERE user_name = '%n' AND domain_name = '%d' AND owns_domain='1' AND '%d'='%{login_domain}' In this example - bill(a)plf.net is an ordinary user. tom(a)plf.net is a domain owner. Tom wants to read bills email. The login is: bill@plf.net*tom@plf.net This results in tom(a)plf.net being classified as an unknown user. Aug 17 08:38:30 auth: Debug: sql(tom(a)plf.net,127.0.0.1): query: SELECT user_name, domain_name, password FROM users WHERE user_name = 'tom' AND domain_name = 'plf.net' AND owns_domain='1' AND 'plf.net'='' Aug 17 08:38:30 auth: Info: sql(tom(a)plf.net,127.0.0.1): unknown user Aug 17 08:38:32 auth: Debug: client out: FAIL 15 user=tom(a)plf.net Aug 17 08:38:32 imap-login: Info: Aborted login (auth failed, 1 attempts): user=<tom(a)plf.net>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=0, secured Note that the query used to determine that tom(a)plf.net is valid is the password_query and not the user_query resulting in unknown user. I think that's where the problem is.

3 7

[Dovecot] Managesieve and Dovecot 2.0: clients incompatible?
by Jerrale G 17 Aug '10

17 Aug '10

I successfully converted my 1.2.x config and am trying to use managesieve. This configuration is really for 1.2.x even though it says for 2.0: http://wiki2.dovecot.org/ManageSieve/Configuration Trying to assign the port number is not by using "listen". Anyway, I just reverted, on the client, to using the default port 2000. The managesieve client now hangs trying to login and eventually times out. Is the new pigeonhole managesieve incompatible with clients that worked with managesieve 0.11.11? There is no output in the log concerning managesieve from pigeonhole. I guess I could put log=/path/to/a/file in the managesieve part and see what happens. In the old dovecot 1.2, we would get a "managesieve-login" in the log when a client even TRIED to login; now, nothing! -- Jerrale G. SC Senior Admin

2 1

Re: [Dovecot] v2.0.0 released
by Dennis Clarke 17 Aug '10

17 Aug '10

Well , configure looked good and the summary seemed fine : Install prefix . : /opt/csw File offsets ... : 64bit I/O polling .... : poll I/O notifys .... : none SSL ............ : yes (OpenSSL) GSSAPI ......... : yes passdbs ........ : static passwd passwd-file shadow pam checkpassword ldap sql : -bsdauth -sia -vpopmail userdbs ........ : static prefetch passwd passwd-file checkpassword ldap sql : -vpopmail -nss SQL drivers .... : pgsql mysql sqlite Everything was going swimmingly and then poof : libtool: compile: /opt/studio/SOS11/SUNWspro/bin/cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-test -I../../src/lib-charset -I../../src/lib-mail -I/opt/csw/include:/opt/csw/mysql51/include/mysql:/opt/csw/postgresql83/include -I/opt/csw/include -xstrconst -xildoff -xarch=v8 -xnolibmil -Xa -xcode=pic32 -xregs=no%appl -xlibmieee -g -xs -I/opt/csw/include -I/opt/csw/mysql51/include/mysql -I/opt/csw/postgresql83/include -D_TS_ERRNO -DSOLARIS2=8 -D_LARGEFILE64_SOURCE -I/opt/csw/include -c imap-id.c -KPIC -DPIC -o .libs/imap-id.o libtool: compile: /opt/studio/SOS11/SUNWspro/bin/cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-test -I../../src/lib-charset -I../../src/lib-mail -I/opt/csw/include:/opt/csw/mysql51/include/mysql:/opt/csw/postgresql83/include -I/opt/csw/include -xstrconst -xildoff -xarch=v8 -xnolibmil -Xa -xcode=pic32 -xregs=no%appl -xlibmieee -g -xs -I/opt/csw/include -I/opt/csw/mysql51/include/mysql -I/opt/csw/postgresql83/include -D_TS_ERRNO -DSOLARIS2=8 -D_LARGEFILE64_SOURCE -I/opt/csw/include -c imap-id.c -o imap-id.o >/dev/null 2>&1 source='imap-match.c' object='imap-match.lo' libtool=yes \ DEPDIR=.deps depmode=none /opt/csw/bin/bash ../../depcomp \ /opt/csw/bin/bash ../../libtool --tag=CC --mode=compile /opt/studio/SOS11/SUNWspro/bin/cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-test -I../../src/lib-charset -I../../src/lib-mail -I/opt/csw/include:/opt/csw/mysql51/include/mysql:/opt/csw/postgresql83/include -I/opt/csw/include -xstrconst -xildoff -xarch=v8 -xnolibmil -Xa -xcode=pic32 -xregs=no%appl -xlibmieee -g -xs -I/opt/csw/include -I/opt/csw/mysql51/include/mysql -I/opt/csw/postgresql83/include -D_TS_ERRNO -DSOLARIS2=8 -D_LARGEFILE64_SOURCE -I/opt/csw/include -c -o imap-match.lo imap-match.c libtool: compile: /opt/studio/SOS11/SUNWspro/bin/cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-test -I../../src/lib-charset -I../../src/lib-mail -I/opt/csw/include:/opt/csw/mysql51/include/mysql:/opt/csw/postgresql83/include -I/opt/csw/include -xstrconst -xildoff -xarch=v8 -xnolibmil -Xa -xcode=pic32 -xregs=no%appl -xlibmieee -g -xs -I/opt/csw/include -I/opt/csw/mysql51/include/mysql -I/opt/csw/postgresql83/include -D_TS_ERRNO -DSOLARIS2=8 -D_LARGEFILE64_SOURCE -I/opt/csw/include -c imap-match.c -KPIC -DPIC -o .libs/imap-match.o "imap-match.c", line 199: identifier redeclared: imap_match_dup current : function(pointer to struct pool {pointer to const struct pool_vfuncs {..} v, unsigned int alloconly_pool :1, unsigned int datastack_pool :1}, pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}) returning pointer to struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data} previous: function(pointer to struct pool {pointer to const struct pool_vfuncs {..} v, unsigned int alloconly_pool :1, unsigned int datastack_pool :1}, pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}) returning pointer to struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data} : "imap-match.h", line 33 "imap-match.c", line 214: identifier redeclared: imap_match_globs_equal current : function(pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}, pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}) returning _Bool previous: function(pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}, pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}) returning _Bool : "imap-match.h", line 36 cc: acomp failed for imap-match.c gmake[3]: *** [imap-match.lo] Error 1 gmake[3]: Leaving directory `/export/medusa/dclarke/build/dovecot/sparc/dovecot-2.0.0-sparcv8-001/src/lib-imap' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory `/export/medusa/dclarke/build/dovecot/sparc/dovecot-2.0.0-sparcv8-001/src' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/export/medusa/dclarke/build/dovecot/sparc/dovecot-2.0.0-sparcv8-001' gmake: *** [all] Error 2 [mimas] So that stops me while I figure out what the issue is with imap-match.h and/or imap-match.c in the Solaris world while using Sun Studio 11. -- Dennis Clarke dclarke(a)opensolaris.ca <- Email related to the open source Solaris dclarke(a)blastwave.org <- Email related to open source for Solaris

3 12

[Dovecot] authentication failure with known good credentials???
by Dave Stevens 17 Aug '10

17 Aug '10

Hi, I have a problem on my server. To illustrate, I created a new user, unclewiggly, and set up a password. I then used sent an email from my usual account. Logging in with my browser I am able to see the inbox, the mail and contents correctly. I then set up a new instance of Eudora 7.1 on my windows 7 box with the appropriate login id and check the account using the correct password. The fetch fails with the client reporting an authentication failure. Ideas? Places to look? Logfiles I can search? Maillog doesn't seem very informative, should I send a snippet? Thanks, Dave -- "It is no measure of health to be well adjusted to a profoundly sick society." Krishnamurti

3 3

[Dovecot] Using a BSDI 4.X system for Dovecot
by The Doctor 17 Aug '10

17 Aug '10

It might be old but still worked. I am using Dovecot 1.2.11 hoping to replace QualComm Eudora and Cyrus IMAP. dovecot -n yields base_dir: /var/run/dovecot/ protocols: imap imaps pop3 pop3s ssl_listen: 204.209.81.1 ssl_cipher_list: ALL:!LOW:!SSLv2 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/dovecot/libexec/dovecot/imap-login login_executable(imap): /usr/dovecot/libexec/dovecot/imap-login login_executable(pop3): /usr/dovecot/libexec/dovecot/pop3-login mail_max_userip_connections(default): 10 mail_max_userip_connections(imap): 10 mail_max_userip_connections(pop3): 3 first_valid_uid: 100 last_valid_uid: 65535 last_valid_gid: 65535 mail_privileged_group: mail mail_location: mbox:~/mail:INBOX=/var/mail/%u dbox_rotate_days: 0 mail_executable(default): /usr/dovecot/libexec/dovecot/imap mail_executable(imap): /usr/dovecot/libexec/dovecot/imap mail_executable(pop3): /usr/dovecot/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/dovecot/lib/dovecot/imap mail_plugin_dir(imap): /usr/dovecot/lib/dovecot/imap mail_plugin_dir(pop3): /usr/dovecot/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): auth default: executable: /usr/contrib/libexec/dovecot/dovecot-auth passdb: driver: passwd-file args: /etc/master.passwd userdb: driver: passwd userdb: driver: passwd-file args: /etc/passwd And running SSL here In my logs I see Aug 17 00:35:10 doctor dovecot: POP3(user1): Fatal: setregid(100(user),14(mail)) failed with euid=0(root): Operation not permitted Aug 17 00:35:15 doctor dovecot: IMAP(user2): Fatal: setregid(100(user),14(mail)) failed with euid=0(root): Operation not permitted Question: What are am I not doing right? -- Member - Liberal International This is doctor(a)nl2k.ab.ca Ici doctor(a)nl2k.ab.ca God, Queen and country! Never Satan President Republic! Beware AntiChrist rising! http://twitter.com/rootnl2k http://www.facebook.com/dyadallee Australia!! Vote to throw the REpublicans to the sharks!

2 1

[Dovecot] 2.0 not starting
by Luciano Mannucci 17 Aug '10

17 Aug '10

Hi everybody, I tried to upgrade my 1.2.13 dovecot to 2.0. The configure/make/install process seemed to work flawlessly. I created the dovenull user, converted my config with #src/config/doveconf -n -c /etc/dovecot.conf > /tmp/dovecot.conf and moved the result manually to /etc/dovecot. By typing "dovecot" (after having stopped the previous instance :), I get: Error: service(pop3-login): listen(::, 110) failed: Address already in use Error: service(imap-login): listen(::, 143) failed: Address already in use Fatal: Failed to start listeners tough nor "netstat -ta" nor "lsof -i" do show anything using port 110 or 143. What did I wrong? Here is my doveconf -n: baobab:/usr/src/local/mail/dovecot/current/dovecot-2.0.0 # doveconf -n # 2.0.0: /etc/dovecot/dovecot.conf # OS: Linux 2.6.27.45-0.1-pae i686 openSUSE 11.1 (i586) ext3 doveconf: Warning: Dovecot was last started using /etc/dovecot.conf, but this config is /etc/dovecot/dovecot.conf auth_cache_size = 3072 auth_debug = yes auth_mechanisms = plain login auth_username_format = %Lu auth_verbose = yes disable_plaintext_auth = no first_valid_gid = 0 first_valid_uid = 100 info_log_path = /var/log/dovecot/logfile.info log_path = /var/log/dovecot/logfile login_greeting = Dovecot at Baobab ready. mail_location = mbox:/var/spool/mailboxes/%u:INBOX=/var/spool/mail/%u:DIRNAME=mbox:INDEX=/var/dovecot_indexes/%u maildir_copy_with_hardlinks = no namespace { inbox = yes location = prefix = separator = . type = private } passdb { driver = pam } plugin { quota = maildir quota_rule = *:storage=300M } protocols = pop3 imap service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } user = root } service imap-login { inet_listener imaps { address = 212.45.144.44, 212.45.144.70, 192.168.134.44 } process_limit = 512 } service pop3-login { inet_listener pop3s { address = 212.45.144.44, 212.45.144.70, 192.168.134.44 } process_limit = 512 } ssl_ca = </etc/ssl/ca.crt ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } version_ignore = yes protocol imap { imap_client_workarounds = delay-newmail mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_enable_last = yes } protocol lda { postmaster_address = postmaster(a)mcs.it } luciano. -- /"\ /Via A. Salaino, 7 - 20144 Milano (Italy) \ / ASCII RIBBON CAMPAIGN / PHONE : +39 2 485781 FAX: +39 2 48578250 X AGAINST HTML MAIL / E-MAIL: posthamster(a)sublink.sublink.ORG / \ AND POSTINGS / WWW: http://www.mannucci.ORG/

4 5

[Dovecot] Master User Features I'd like to see
by Marc Perkel 17 Aug '10

17 Aug '10

Here's what I'd like. Limited master users, where someone can be a master users for some domains but not others. I think I could do what I want with the right kinds of variable passing that doesn't yet exist. Let me see if I can explain clearly. From the example in the wiki: auth_master_user_separator = * passdb { driver = sql args = /etc/dovecot/dovecot-sql-master.conf.ext master = yes pass = yes } passdb { driver = sql args = /etc/dovecot/dovecot-sql.conf.ext } userdb { driver = sql args = /etc/dovecot/dovecot-sql.conf.ext } Login looks like this: # telnet localhost 143 * OK Dovecot ready. 1 login loginuser*masteruser masterpass 1 OK Logged in. I'm assuming that the masteruser and masterpass is passed to the master passdb and when doing so the variable %u is the master user. I assume that %n and %d also represent the name and domain part of the master user. What I need is to also be able to have variables for the loginuser passed to the master user query. Something like %lu, %ln, and %ld perhaps. That way with MySQL tricks I might be able to see if the master user is master for that particular login user. That way I can give domain owners or owners of multiple domains the ability to manage the email accounts within their scope of permission.

5 17