- dovecot - dovecot.org

[Dovecot] SASL EXTERNAL docs?
by Patrick Ben Koetter 28 Jun '10

28 Jun '10

The wiki says Dovecot supports SASL EXTERNAL as of version 1.2. I couldn't find any documentation telling me how I would configure SASL EXTERNAL. Is there any? p@rick -- state of mind Digitale Kommunikation http://www.state-of-mind.de Franziskanerstraße 15 Telefon +49 89 3090 4664 81669 München Telefax +49 89 3090 4666 Amtsgericht München Partnerschaftsregister PR 563

2 1

[Dovecot] importing outlook express messages to dovecot imap server
by Angelo Chen 26 Jun '10

26 Jun '10

Hi, I have a local Dovecot 1.1.4 running. I have a big number of outlook express messages that I like to put into Maildir so that I can use Dovecot's imap to access. I can convert them into mbox format. any available means for me to import outlook express/mbox messages into Maildir/Dovecot? command line will be preferred, Thanks, Angelo

8 20

Re: [Dovecot] dovecot evaluation on a 30 gb mailbox
by Eric Shubert 26 Jun '10

26 Jun '10

Rajesh M wrote: >> Rajesh M wrote: >>>> Rajesh M wrote: >>>>> eric >>>>> >>>>> i studied LDA a bit >>>> > >>>>> if i use lda that means all my 5000+ users' email index files will be >>>>> continuously updated when every email arrives -- means a lot of writes >>>>> to >>>>> disk ... is that correct ? >>>> Yes, but I think you make it sound worse than it is. Updating the index >>>> as each email arrives doesn't involve rebuilding the whole index like >>>> what happens at login. It only updates what's there instead of >>>> rebuilding the whole thing. I can't speak from experience, but I expect >>>> that it's very efficient, and you'll never notice any increased load on >>>> the machine. Perhaps the equivalent of adding journaling to a >>>> filesystem. You can ask the dovecot list to verify this. >>>> >>>> Also, it just occurred to me that if you're using ext3, you should be >>>> sure to optimize the filesystem. Off hand, I'd use the noatime and >>>> nodiratime mount options (man mount) and dir_index filesystem option >>>> (man tune2fs). >>>> >>>>> if yes then i dont want that since only around 200 or so people out of >>>>> the >>>>> above 5000 use webmail. >>>> Just to be clear, it affects all imap usage, not only webmail (although >>>> your uses may not use imap other than webmail). >>>> >>>>> i will study a some more and revert >>>> I hope you can figure a way to try this out. I expect that QMT's move >>>> to >>>> dovecot in the future will include the deliver LDA, and your work here >>>> will be a big help getting us there. >>>> >>>> Let me know if I can be of any further help. >>>> >>>> -- >>>> -Eric 'shubes' >>>> >>> >>> hi eric >>> >>> few questions >>> >>> i wil enable lda exclusively for this one 30 gb email box using .qmail >>> file see the performance improvement .. is that ok ? >> I believe that would be fine. >> >>> can i safely enable atime for this user maildir ? >> Sure. That's simply a performance consideration. I don't believe that >> atime is used for much of anything, so either atime or noatime is safe. >> noatime is just a little faster because the inode (where that piece of >> information is stored) doesn't need to be updated each time a file is >> accessed. >> >>> thanks for your help >> Sure. I'm eager to see your results. >> >> -- >> -Eric 'shubes' >> > > > hi eric > > this is what i plan to do > > as per > http://wiki.dovecot.org/LDA/Qmail > > i need to enter the following line in a .qmail file under the Maildir > directory of the user > |/var/qmail/bin/preline -f /usr/local/libexec/dovecot/deliver -d $EXT@$USER the location is /usr/libexec/dovecot/deliver on my system. > i would add an email forward using qmailadmin web interface (which creates > the .qmail file) and then manually edit the .qmail file and put the above > line in it (so that ownership and permissions are taken care off) That sounds ok. The permissions/ownership I'm seeing on .qmail files is: -rw------- 1 vpopmail vchkpw 101 Mar 26 2008 .qmail > now i would also need to edit the dovecot.conf file > could you guide me on what changes do i need to dovecot.conf file ? Others on this list would be more help than me regarding this. From the looks of it though (after browsing the dovecot.conf file, which is well documented btw) I don't think you'd need to change a thing. We'll certainly find out if that's the case or not. I'd just give it a go. Perhaps on a test account initially. ;) -- -Eric 'shubes'

2 1

[Dovecot] Pigeonhole Managesieve issue with Dovecot 2.0
by Tim Traver 26 Jun '10

26 Jun '10

Hi all, ok, I am running version v2.0.beta6 and the latest pigeonhole build to run managesieve and the sieve delivery filters... I am getting the following response from the managesieve port when connecting : Escape character is '^]'. "IMPLEMENTATION" "Dovecot" "SIEVE" "" "SASL" "PLAIN" "STARTTLS" "VERSION" "1.0" OK "Dovecot ready." But, I think that the SIEVE line is suppose to have all of the supported sieve functions like so : "SIEVE" "comparator-i;ascii-numeric fileinto reject vacation imapflags notify include envelope body relational regex subaddress copy" I modified the dovecot sieve config file to try and add (although they should all be added by default), and it still comes up blank... Am I missing something? what might cause it to not broadcast the sieve implementations that it has? Thanks, Tim.

2 2

[Dovecot] auth_cache_size
by Daniel L. Miller 25 Jun '10

25 Jun '10

I was going to ask how much space I should allocate for auth_cache_size - but decided to read the wiki first. Now I'll be more specific - Wiki says about 50 bytes per passdb, and up to 200 bytes for userdb - so my arithmetic says each combined entry needs 250 bytes budgeted. Assuming that's correct, I need some clarification. Let's start small. Assume ten users, all connected - and everybody also likes looking at everybody else's mailbox. So there are ten clients, each with at least ten connections (I say at least because each folder viewed within an account is its own connection, right?). How is the auth_cache used? If I have ten user/pass combinations - is that all that is stored? Or are there connection-specific entries as well? In other words, for the above example, do I have 10 x 250 bytes yields auth_cache_size=3, or do I need 10 x 10 x 250 yields auth_cache_size=30 - or am I totally off? -- Daniel

2 1

Re: [Dovecot] dovecot evaluation on a 30 gb mailbox
by Rajesh M 25 Jun '10

25 Jun '10

> Rajesh M wrote: >>> Rajesh M wrote: >>>> eric >>>> >>>> i studied LDA a bit >>> > >>>> if i use lda that means all my 5000+ users' email index files will be >>>> continuously updated when every email arrives -- means a lot of writes >>>> to >>>> disk ... is that correct ? >>> Yes, but I think you make it sound worse than it is. Updating the index >>> as each email arrives doesn't involve rebuilding the whole index like >>> what happens at login. It only updates what's there instead of >>> rebuilding the whole thing. I can't speak from experience, but I expect >>> that it's very efficient, and you'll never notice any increased load on >>> the machine. Perhaps the equivalent of adding journaling to a >>> filesystem. You can ask the dovecot list to verify this. >>> >>> Also, it just occurred to me that if you're using ext3, you should be >>> sure to optimize the filesystem. Off hand, I'd use the noatime and >>> nodiratime mount options (man mount) and dir_index filesystem option >>> (man tune2fs). >>> >>>> if yes then i dont want that since only around 200 or so people out of >>>> the >>>> above 5000 use webmail. >>> Just to be clear, it affects all imap usage, not only webmail (although >>> your uses may not use imap other than webmail). >>> >>>> i will study a some more and revert >>> I hope you can figure a way to try this out. I expect that QMT's move >>> to >>> dovecot in the future will include the deliver LDA, and your work here >>> will be a big help getting us there. >>> >>> Let me know if I can be of any further help. >>> >>> -- >>> -Eric 'shubes' >>> >> >> >> hi eric >> >> few questions >> >> i wil enable lda exclusively for this one 30 gb email box using .qmail >> file see the performance improvement .. is that ok ? > > I believe that would be fine. > >> can i safely enable atime for this user maildir ? > > Sure. That's simply a performance consideration. I don't believe that > atime is used for much of anything, so either atime or noatime is safe. > noatime is just a little faster because the inode (where that piece of > information is stored) doesn't need to be updated each time a file is > accessed. > >> thanks for your help > > Sure. I'm eager to see your results. > > -- > -Eric 'shubes' > hi eric this is what i plan to do as per http://wiki.dovecot.org/LDA/Qmail i need to enter the following line in a .qmail file under the Maildir directory of the user |/var/qmail/bin/preline -f /usr/local/libexec/dovecot/deliver -d $EXT@$USER i would add an email forward using qmailadmin web interface (which creates the .qmail file) and then manually edit the .qmail file and put the above line in it (so that ownership and permissions are taken care off) now i would also need to edit the dovecot.conf file could you guide me on what changes do i need to dovecot.conf file ? rajesh

1 0

[Dovecot] Work with auth socket
by Неворотин Вадим 24 Jun '10

24 Jun '10

I need to use Dovecot auth socket from my perl script to validate user's passwords (for jabber server). Is there any information about how to communicate with dovecot auth socket?

2 2

[Dovecot] LMTP SIZE Option
by Paul Freeman 24 Jun '10

24 Jun '10

Hi Timo, Are there any plans to support the SIZE option in the lmtp server? Paul

5 7

[Dovecot] Fw: Re: step-to-step Installation Guide
by Spyros Tsiolis 24 Jun '10

24 Jun '10

XMail is not bad either. Strictly command-line oriented but very powerfull (if you want my opinion anyway). http://www.xmailserver.org I've been using it for almost a decade now (!) s. --- On Wed, 23/6/10, Charles Marcus <CMarcus(a)Media-Brokers.com> wrote: > From: Charles Marcus <CMarcus(a)Media-Brokers.com> > Subject: Re: [Dovecot] step-to-step Installation Guide > To: dovecot(a)dovecot.org > Date: Wednesday, 23 June, 2010, 18:34 > On 2010-06-23 11:03 AM, Eric Shubert > wrote: > > Are you running other services on your server, or will > it be dedicated > > to email? If the later, you might want to look into > > http://qmailtoaster.com/. > > Bad advice imo. QMail is dead, it just doesn't know it yet. > :) > > Seriously thought, the only person who should be using > qmail is someone > who has been using it forever and knows it inside and out - > and I would > *still* argue that they should just admit the truth and > move on. > > Do yourself a favor and don't go down that road. The best > two open > source MTA's are postfix and Exim, so you should be using > one of them > unless there is a compelling reason to use something else. > I personally > prefer postfix, but only because that's all I've ever used. > I've heard > nothing but good things about Exim, so you wouldn't be > going wrong > either way. > > -- > > Best regards, > > Charles >

1 0

Re: [Dovecot] dovecot evaluation on a 30 gb mailbox
by Rajesh M 24 Jun '10

24 Jun '10

> -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On Wed, 23 Jun 2010, Rajesh M wrote: > >>> Roundcube 0.3.1 seems to have a hard coded limit of 200 mails per page. > >> it again took around 4-5 mins > > I do not know nothing about Roundcube, therefore I wonder where the 5min > delay come from: > > a) Do you keep index files on Dovecot side? > > b) Do you deliver / manipulate the mailbox via Dovecot only? E.g. do you > use Dovecot deliver? > > c) If you rawlog or sniff the connection and issue the same commands as > roundcube to Dovecot via, say, telnet next morning, is the delay the same? > http://wiki.dovecot.org/Debugging/Rawlog > http://wiki.dovecot.org/TestInstallation?highlight=%28telnet%29 > > a) and b) should avoid rereading of the mailbox. > c) is to ensure that Roundcube does not add the delay itself. > >> the extra 1000 emails were to be added to the cache .. does dovecot go >> thru all the 170000 emails again to form the meta data ? or is there >> some >> cache expiry period ? > > Usually no. > > Regards, > > - -- > Steffen Kaiser > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.6 (GNU/Linux) > > iQEVAwUBTCG2V7+Vh58GPL/cAQJyHAf+MayOiuayYay2mCM5i0DJH296pbuDMAXc > kbXKMRXFOP/KGeAYmHirL/9/63h0IjeRtSuBe0HJxmbg87aZVWOejVaXSPOPTAUR > n8d++siuBnQ8xiDFw0LKgep2HetYFdxepDRjdPTOM/Drpv+THFRGOVnem6JYb7yw > 0XqkQG7M4pKBaxZA+0HFH4c4ADz3XykkOluTHhmU0zDXcdkK0TybfEiwGRY3R7i8 > IozQ62pKv/v2t2z2clYOXsqLe6pM14B8/2SXUX4Anrkz8AoKyocT1Ks9hOCkizEn > bG99r7U+WObrMmbTpy6jsq//amh496ot37S4DO7DBKa3cKYqOJwwXg== > =gqnn > -----END PGP SIGNATURE----- > hi did the tests once again on this large email box i set maildir_very_dirty_syncs = yes this was done in the morning and dovecot was restarted i logged after about 4 hours after the previous login again it took around 5 mins to login i was monitoring my server load which around 1.5 - 2 on my dual core dual xeon machine this increased to around 8-9 during the login process the no of emails in the box had increase by around 7500 emails setting maildir_very_dirty_syncs = yes does not seem to help i have pasted below my dovecot.conf file ################ base_dir = /var/run/dovecot/ protocols = imap imaps log_path = /backup1/qmaillog/dovecot.log #ssl_disable = no ssl_cert_file = /var/qmail/control/servercert.pem ssl_key_file = /var/qmail/control/servercert.pem ssl_cipher_list = djdjjd verbose_ssl = yes protocol imap { listen = *:143 ssl_listen = *:993 } ## Login processes #login_dir = /usr/local/var/run/dovecot/login login_user = dovecot login_process_per_connection = no login_processes_count = 3 login_process_size = 128 login_max_processes_count = 512 login_greeting = Ready #login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c ## Mailbox locations and namespaces mail_location = maildir:~/Maildir namespace private { separator = . prefix = INBOX. inbox = yes } # Mail processes verbose_proctitle = yes first_valid_uid = 89 last_valid_uid = 89 # Maximum number of running mail processes. When this limit is reached, max_mail_processes = 200 # Set max. process size in megabytes. Most of the memory goes to mmap()ing # files, so it shouldn't harm much even if this limit is set pretty high. mail_process_size = 256 ## Maildir-specific settings maildir_very_dirty_syncs = yes ## Authentication processes disable_plaintext_auth = yes auth default { mechanisms = plain login digest-md5 cram-md5 passdb vpopmail { args = webmail=127.0.0.1 } userdb vpopmail { } user = vpopmail count = 1 ssl_require_client_cert = no } ################ thanks rajesh

8 12

[Dovecot] Regenerate Index and Control Files
by John S 24 Jun '10

24 Jun '10

In a bad attempt of correcting a non-related error, I deleted, and recreated, the control and index directories; now, the only e-mail showing up, in all user mailboxes, is mail that has been delivered afterward. How do I make dovecot regenerate the control and index files so that the old e-mail shows up? John

2 1

[Dovecot] step-to-step Installation Guide
by Marcus Linnenkohl 23 Jun '10

23 Jun '10

Hello, I'm new here, and I'm from Germany, so please be patient with me because my English is not so good ;) I am searching for a Step-to-Step Guide to first-configure Dovecot. I want to create virtual Users wich can logon to my Server to a Webinterface to call theire mails. I think IMAP is the right protokoll but it should be safe, so i think IMAPs is better. Unfortunately I am not familiar with Dovecot, so I need your help. Yours sincerely Marcus -- GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01

5 5

[Dovecot] quota_set leak
by Mike Abbott 23 Jun '10

23 Jun '10

The quota plugin in 2.0.beta6 leaks 2KB "quota settings" pools. Here is a patch to plug this leak, assuming you intended the caller of quota_init to retain ownership of the quota_set. If on the other hand you intended for quota_init to assume ownership of the quota_set, then the quota_settings_deinit call belongs in quota_deinit. --- a/src/plugins/quota/quota-storage.c (beta6) +++ b/src/plugins/quota/quota-storage.c (patched) @@ -427,6 +427,7 @@ { struct quota_user *quser = QUOTA_USER_CONTEXT(user); + quota_settings_deinit(&quser->quota->set); quota_deinit(&quser->quota); quser->module_ctx.super.deinit(user); }

2 1

[Dovecot] Proxy Access (Manager/Secretary) Best Practices?
by Chris Hobbs 23 Jun '10

23 Jun '10

I've mostly got our dovecot+postfix+SOGo+openldap open source groupware replacement working the way I want it to; we're replacing GroupWise in our organization and I'm thrilled to be doing it. I'm supporting about 1,000 active staff users (and another 6,000 student accounts). I've got e-mail and calendar sharing working, and it does what it says it will do, but it is (go figure) different in concept from Proxy access under GroupWise. In GroupWise, I can give my secretary proxy access to my account and she can read all of my folders, see my calendars, and send e-mail as me. To someone that receives an e-mail or appointment request from her while she's proxied to me, there's no distinction at all. Is there a way to mimic this sort of functionality with the tools I've chosen? I've figured out that I can add additional 'mail' attributes to the secretary's record, and those addresses are available as drop-down choices in the SOGo web interface, but with the secretary's name and not the manager. Any advice will be much appreciated. And many thanks to the developers involved for writing and making available such amazingly good software. Eliminating the license fees we've been paying to Novell is allowing me to save a technician that surely would have been eliminated in budget cuts this year. Chris Chris Hobbs Director, Technology New Haven Unified School District -- This message was scanned by ESVA and is believed to be clean.

5 4

[Dovecot] expire plugin
by suzuki 23 Jun '10

23 Jun '10

Hello, I am testing expire plugin, with quota plugin enabled. When I execute expire-tool, maildirsize is not updated. Is there any solution to update maildirsize when executing expire-tool? # /usr/local/dovecot/sbin/dovecot --version 1.1.18 # /usr/local/dovecot/sbin/dovecot -n # 1.1.18: /usr/local/dovecot/etc/dovecot.conf # OS: FreeBSD 7.2-STABLE i386 base_dir: /var/run/dovecot/ syslog_facility: local4 protocols: pop3 ssl_disable: yes disable_plaintext_auth: no login_dir: /var/run/dovecot//login login_executable: /usr/local/dovecot/libexec/dovecot/pop3-login login_greeting: ready mail_max_userip_connections: 1 verbose_proctitle: yes first_valid_uid: 10026 last_valid_uid: 10026 first_valid_gid: 10026 last_valid_gid: 10026 mail_privileged_group: vmail mail_uid: 10026 mail_gid: 10026 mail_location: maildir:~/Maildir mail_debug: yes maildir_copy_preserve_filename: yes mail_executable: /usr/local/dovecot/libexec/dovecot/pop3 mail_plugins: quota expire mail_plugin_dir: /usr/local/dovecot/lib/dovecot/pop3 mail_log_max_lines_per_sec: 30 pop3_enable_last: yes pop3_reuse_xuidl: yes pop3_lock_session: yes pop3_client_workarounds: outlook-no-nuls,oe-ns-eoh lda: postmaster_address: postmaster mail_plugins: quota expire sendmail_path: /usr/local/sbin/sendmail auth_socket_path: /var/run/dovecot/auth-master auth default: verbose: yes passdb: driver: sql args: /usr/local/dovecot/etc/dovecot-sql.conf userdb: driver: sql args: /usr/local/dovecot/etc/dovecot-sql.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 user: vmail plugin: quota: maildir expire: Spam 7 expire_dict: proxy:/var/run/dovecot/dict-server:expire auth_socket_path: /var/run/dovecot/auth-master dict: expire: mysql:/usr/local/dovecot/etc/dovecot-dict-expire.conf

2 2

[Dovecot] beta6 mdbox errors
by Mike Abbott 22 Jun '10

22 Jun '10

Dovecot-2.0.beta6 sometimes terminates client connections and reports these errors: Error: Corrupted dbox file /Volumes/Mail/joe/storage/m.1 (around offset=6216579): msg header has bad magic value Error: Corrupted dbox file /Volumes/Mail/joe/storage/m.1 (around offset=6216579): uid=0 points to broken data at offset=6216579 Warning: mdbox /Volumes/Mail/joe/storage: rebuilding indexes (I set mdbox_rotate_size = 200M.) These did not appear with beta5.

2 2

[Dovecot] More Dovecot 2.0 permissions issues
by Tim Traver 22 Jun '10

22 Jun '10

Hi Timo, ok, using the latest 2.0beta6... I can't figure out the settings for the log file to have the correct permissions. When the log file is created, it is created owned by root and 0600 permissions, which doesn't allow the lda to write to it if I use different users and groups for that main config... If I then chmod the log file to 666, then everything is happy, but again, if that log file is removed and created by dovecot, it will create it back with 0600 and the lda will error and not deliver mail because of it... I was not able to find anywhere else to set the mode of the log files or the mask that is used... here is the current config : # 2.0.beta6: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.0-RELEASE-p3 i386 auth_username_format = %Lu auth_username_translation = %@ auth_verbose = yes disable_plaintext_auth = no dotlock_use_excl = yes first_valid_uid = 100 listen = * lock_method = dotlock log_path = /local/logs/dovecot.errors mail_gid = 100 mail_location = maildir:%h/Maildir mail_nfs_index = yes mail_nfs_storage = yes mail_uid = 100 mmap_disable = yes passdb { args = /bin/checkpassword_dovecot_auth driver = checkpassword } plugin { quota = maildir sieve = ~/.dovecot.sieve sieve_dir = ~/Maildir/sieve } protocols = imap pop3 managesieve quota_full_tempfail = yes service auth { unix_listener auth-userdb { mode = 0660 } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = prefetch } userdb { args = /bin/checkpassword_dovecot_deliver driver = checkpassword } verbose_proctitle = yes protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { mail_plugins = quota sieve } protocol imap { mail_plugins = quota imap_quota } Thanks, Tim.

2 3

[Dovecot] Postfix, MySQL, Dovecot LDA and alias domains
by Darek M 22 Jun '10

22 Jun '10

Hi there, I have a postfix/postfixadmin/mysql/dovecot install that was using 'virtual' for the LDA. I tried the 'dovecot' LDA to enable Sieve but ran into trouble with aliases. With domain "some-domain.com" being an alias to "somedomain.com", mail sent to *(a)somedomain.com would be delivered to the Maildir fine, but the 'dovecot' LDA tossed "unknown user" for anything sent to *(a)some-domain.com (the alias to the other domain). My dovecot.sql: driver = mysql connect = host=/var/lib/mysql/mysql.sock dbname=postfix user=dovecot password=dovecot user_query = SELECT concat('/home/vmail/', maildir) as home, concat('maildir:/home/vmail/', maildir) as mail, 5000 AS uid, 5000 AS gid, concat('maildir:storage=', quota) AS quota FROM mailbox WHERE username = '%u' AND active = '1' password_query = SELECT username as user, password, concat('/home/vmail/', maildir) as userdb_home, concat('maildir:/home/vmail/', maildir) as userdb_mail, 5000 as userdb_uid, 5000 as userdb_gid FROM mailbox WHERE username = '%u' AND active = '1' The problem is fairly simple: Dovecot isn't being told anything about the 'alias_domain' table that pairs alias domains with actual ones. So the question is: do I add a second "user_query" in dovecot.sql, or is there an "alias_query" directive, or similar? And does anyone have a query that would point an alias domain to the real maildir? - Darek

3 6

[Dovecot] Outlook problem
by Patric Falinder 22 Jun '10

22 Jun '10

Hi, I have some problems that every time I start Outlook and retrieve my e-mails and then later tries to do it on my iPhone for example, I get some sort of problem that I can't get the mails. I searched around on the wiki and found the "outlook-no-nuls" and "outlook-idle" options, but where am I suppose to add them? I only have "pop3_uidl_format = %08Xu%08Xv" in my "protocol pop3 {}" and it didn't work to add it to a new line there. Thanks, Patric

2 1

[Dovecot] imap acl write tb3 plugin dovecot2 vs XMAILBOXINFO
by Robert Schetterer 22 Jun '10

22 Jun '10

Hi Timo, i played a little bit with an experimental tb3 imap acl write extension https://addons.mozilla.org/de/thunderbird/addon/176736/ with dovecot2 got errors like XMAILBOXINFO: Unknown command any idea? -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 7

Re: [Dovecot] action-matrix-patch (was Re: antispam Clarification about spam/trash/unsure folders)
by Steffen Kaiser 22 Jun '10

22 Jun '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Tue, 22 Jun 2010, Johannes Berg wrote: > Meinst du mit "Hosting" jetzt nur die technische Komponente? Das ist mir Nee, sorry. Ich meinte beides. > eigentlich egal, ich kann dir auch gerne Zugriff auf den git tree geben > und so. Hm, git ist ein Buch mit sieben Sigel. Ich habe CVS, Subversion und hg im Einsatz, aber git krieg' ich nicht gebacken ... . Ich verzweifl' da schon am Merge, wenn ich lokale Aenderungen habe und das Repository vom Server aktualisiere ... . > Andererseits wird das plugin mittlerweile doch ziemlich viel benutzt, > und würde vermutlich davon profitieren direkt in dovecot integriert zu > werden... Ich frag' Timo mal. Tschuess, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBTCC6b7+Vh58GPL/cAQL5eAf/Vk/xUNHiZrCa2ht73K0p/53voU+kkMUV x+BDg1T6MSchI4shfZA4TP6TEyiqmd9RI8G9b1C2Jp5z7MJLJi4CAo6Gty1PdsKx Pvh8V4RzEHGLGyV56BjqDVC6g2bjuugUsRnqz8qdjB91TnWmBDx2Ctz0bsdH8S/b ikYLX1b7j4HjabmGO8X6xyUJbdg+OioyMwfYoUBZlMh46kbyS12P5LwfeXUBUELR BU6dRjDSo+89gOn6ADxlvc4EA08UczNp8t2iiOCVw8GfUBNH5BQ2AiPQl8o217Tl fiOIGME6+wzTnIDOxCA0WySqXQEAM73JQn4rbDhZrBFp1EPg+2i9rQ== =fs0o -----END PGP SIGNATURE-----

1 0

[Dovecot] "failed to store into mailbox 'INBOX': Not enough disk space." with large mail
by Johannes Dröge 22 Jun '10

22 Jun '10

Hello, I am having this error message on some rare emails with more than 6 mb or so. Neither the dovecot server nor the filesystem where the maildir resides have any quota or are full at the time of delivering. The mails goes getmail->postfix->dovecot delivery agent Is the mail written to any other place than the maildir folder? Even though all my temp folders should also be able to hold some megabytes... Thanks for any help, Johannes message: *sieve: info: started log at ... error: msgid=<XXX>: failed to store into mailbox 'INBOX': Not enough disk space. * dovecot --version 1.2.10 dovecot -n # 1.2.10: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-686 i686 Debian 5.0.4 xfs log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps ssl_cert_file: /etc/certificates/XXX ssl_key_file: /etc/certificates/XXX login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login login_greeting: XXX mail_access_groups: mail mail_location: maildir:/services/mail/%u mbox_write_locks: fcntl dotlock lda: postmaster_address: root mail_plugins: sieve auth default: verbose: yes passdb: driver: pam userdb: driver: passwd plugin: sieve: /var/sieve-scripts/%u/filter.sieve

3 6

[Dovecot] Panic: file doveadm-print.c: line 102: unreached
by Pascal Volk 22 Jun '10

22 Jun '10

Hi Timo, I've tried `doveadm search -u pv? …` -> Aborted (core dumped) dovecot --version: 2.0.beta6 (573cb66e9180) Backtrace: attached. Regards, Pascal -- The trapper recommends today: c01dcofe.1017103(a)localdomain.org

1 1

[Dovecot] New mailbox & autocreate
by Bambero 21 Jun '10

21 Jun '10

Hi, First of all BIG THANKS for great piece of software. I have a small problem with autocreate. My mails are stored in: /var/mail Ex. /var/mail/test(a)test.pl/Maildir Account information comes from DB. So when new account appears in DB full path including home dir is created. But there is one small problem: Group always is "wheel". Autocreating ignores gid from DB and uses the group of the parent directory - in this case /var/mail. But when I create home dir manualy (setting right group) group of autocreated Maildir is OK. Is it possible to configure dovecot to set group from DB. Regards, Bambero

3 3

[Dovecot] 2.0 beta4 latest hg: segfault with virtual plugin
by e-frog 21 Jun '10

21 Jun '10

Hello Timo, latest 2.0 hg version (changeset a6b050cc4a9a) segfaults when selecting a virtual mailbox. Backtrace and dovecot -n are attached. Please let me know if I can help with anything else to debug this. Regards, e-frog

2 4

[Dovecot] Error: dict: Leaked a t_pop() call
by Brendan McCollam 21 Jun '10

21 Jun '10

I'm running dovecot 1.0.7 on CentOS 5.5, and I've configured it to work with PostfixAdmin (http://sourceforge.net/projects/postfixadmin/) Everything seems to work great, except for one problem. Any time a user logs in, I get errors like the following Jun 19 02:21:59 ve dovecot: dict: Leaked a t_pop() call in I/O handler (nil) Jun 19 02:21:59 ve dovecot: dict: Raw backtrace: dict [0x40e85e] -> dict [0x40e5cc] -> dict(io_loop_handler_run+0x1c9) [0x411279] -> dict(io_loop_run+0x18) [0x4106b8] -> dict(main+0x139) [0x408509] -> /lib64/libc.so.6(__libc_start_main+0xf4) [0x2ab19ec13994] -> dict[0x407589] The only information I could find online was from this mailing list a few years back: http://copilotco.com/mail-archives/dovecot.2007/msg08975.html The response seems to be "nobody keeps their quota in MySQL", but the setup I'm using is what's recommended by the authors of PostfixAdmin: http://postfixadmin.svn.sourceforge.net/viewvc/postfixadmin/trunk/DOCUMENTS… So, I guess my questions are these: 1) Is this error at all serious? Will it impact performance, or can it be safely ignored? 2) If it is something that should be addressed, do you think I would be better off trying to patch and recompile the 1.0.7 version, or just upgrading to a newer version of Dovecot (keeping in mind that 1.0.7 seems to be the latest available in CentOS repositories) Thank you for your time, and your outstanding software. -Brendan

3 4

Re: [Dovecot] Error: dict: Leaked a t_pop() call
by Brendan McCollam 21 Jun '10

21 Jun '10

> Date: Sat, 19 Jun 2010 20:43:13 +1000 > From: Noel Butler<noel.butler(a)ausics.net> > Subject: Re: [Dovecot] Error: dict: Leaked a t_pop() call > > *shakes head* who cares what version they have, it is outdated, and any > bugs may have been found and fixed years ago! The same applies to > ancient debian versions as well, in ANY software you have issues with, > it is wise to use their latest current stable before asking them for > help, be it dovecot, apache, postfix, bind... or whatever :) As > developers hate wasting their time on ancient resolved bugs. sadly > people who decide to only rely upon the ancient distro versions need to > remember they are really "use at your own risk" packages. Thanks for the information. I'm not trying to waste your time, and I wasn't really asking for 'help' per se, as much as simply a clear answer about whether that error was even worth worrying about. I'm well aware that 1.0.7 is a pretty old release, and you don't have much control over what the distro maintainers choose to package. Generally speaking, I think there are advantages (not introducing incompatibility with other software, simple dependency resolution, automatic security updates, etc.) to sticking with repo versions, unless you have a compelling reason to do otherwise. In this case, the bugfixes and improvements in quota accuracy are a good reason to upgrade. > > Please download 1.2.12, the current stable release, however read the > release notes because some settings will be incompatible with 1.0.x. > there wont be too many differences but might be some, depending on your > setup. I have moved to 1.2.12 and updated my dovecot-dict-quota.conf file, and it seems to be working great. Thanks again.

3 2

[Dovecot] .dotfiles in Maildirs appear in folderlisting - dovecot 2.0
by Matthias Rieber 21 Jun '10

21 Jun '10

Hi, I've some dot-files in the Maildir/ folder. These files appear in the Mailbox listing, but of course they can't be accessed. In the previous dovecot versions these files were hidden. Matthias

3 2

[Dovecot] Panic: file doveadm-print-table.c: line 56 assertion failed
by Pascal Volk 21 Jun '10

21 Jun '10

Hi Timo, `doveadm -f table mailbox status -u bar all inbox\*` aborts with: Panic: file doveadm-print-table.c: line 56 (doveadm_calc_header_length): assertion failed: ((value_count % hdr_count) == 0) Backtrace is attached. Regards, Pascal -- The trapper recommends today: c01dcofe.1017215(a)localdomain.org

1 2

[Dovecot] doveadm search: Error: Syncing mailbox foo failed: Mailbox doesn't exist: foo
by Pascal Volk 21 Jun '10

21 Jun '10

Hi Timo, doveadm reports errors for \Noselect mailboxes. What I have: 1 LIST "" * * LIST (\HasNoChildren) "/" "Templates" * LIST (\HasChildren) "/" "INBOX" * LIST (\Noselect \HasChildren) "/" "INBOX/Lists" * LIST (\Noselect \HasChildren) "/" "INBOX/Lists/vmm" * LIST (\HasNoChildren) "/" "INBOX/Lists/vmm/users" * LIST (\HasNoChildren) "/" "INBOX/Lists/vmm/hg" * LIST (\Noselect \HasChildren) "/" "INBOX/Lists/Postfix" * LIST (\HasNoChildren) "/" "INBOX/Lists/Postfix/users" * LIST (\HasNoChildren) "/" "INBOX/Lists/Postfix/users-de" * LIST (\Noselect \HasChildren) "/" "INBOX/Lists/Debian" * LIST (\HasNoChildren) "/" "INBOX/Lists/Debian/User-German" * LIST (\HasNoChildren) "/" "INBOX/Lists/Debian/Sec-Announce" * LIST (\Noselect \HasChildren) "/" "INBOX/Lists/Gentoo" * LIST (\HasNoChildren) "/" "INBOX/Lists/Gentoo/Announce" * LIST (\HasNoChildren) "/" "INBOX/Lists/Gentoo/Security" * LIST (\HasChildren) "/" "INBOX/Lists/Dovecot" * LIST (\HasChildren) "/" "INBOX/Lists/Dovecot/CVS" * LIST (\HasNoChildren) "/" "INBOX/Lists/Dovecot/CVS/2_0" * LIST (\HasNoChildren) "/" "INBOX/Lists/Dovecot/CVS/1_1" * LIST (\HasNoChildren) "/" "INBOX/Lists/Dovecot/CVS/1_2" * LIST (\Noselect \HasChildren) "/" "INBOX/Lists/Dovecot/Pigeonhole" * LIST (\HasNoChildren) "/" "INBOX/Lists/Dovecot/Pigeonhole/2_0" * LIST (\HasNoChildren) "/" "INBOX/Lists/Dovecot/Pigeonhole/Sieve-1_2" * LIST (\HasNoChildren) "/" "INBOX/Lists/Dovecot/Pigeonhole/MSieve-1_2" * LIST (\HasNoChildren) "/" "INBOX/symio" * LIST (\Noselect \HasChildren) "/" "INBOX/Bugs" * LIST (\HasNoChildren) "/" "INBOX/Bugs/Python" * LIST (\HasNoChildren) "/" "INBOX/Bugs/Debian" * LIST (\HasNoChildren) "/" "INBOX/Bugs/Gnome" * LIST (\HasNoChildren) "/" "INBOX/Bugs/Gentoo" * LIST (\HasNoChildren) "/" "INBOX/Bugs/Xfce" * LIST (\HasNoChildren) "/" "Drafts" * LIST (\HasNoChildren) "/" "Junk" * LIST (\HasNoChildren) "/" "Trash" * LIST (\HasNoChildren) "/" "Sent" 1 OK List completed. What I get: doveadm search -u bar deleted 8030321bcb68044bd43f000035ca9452 1292 8030321bcb68044bd43f000035ca9452 1293 8030321bcb68044bd43f000035ca9452 1294 8030321bcb68044bd43f000035ca9452 1295 8030321bcb68044bd43f000035ca9452 1296 8030321bcb68044bd43f000035ca9452 1297 8030321bcb68044bd43f000035ca9452 1298 doveadm(bar): Error: Syncing mailbox INBOX/Lists failed: Mailbox doesn't exist: INBOX/Lists doveadm(bar): Error: Syncing mailbox INBOX/Lists/vmm failed: Mailbox doesn't exist: INBOX/Lists/vmm doveadm(bar): Error: Syncing mailbox INBOX/Lists/Postfix failed: Mailbox doesn't exist: INBOX/Lists/Postfix doveadm(bar): Error: Syncing mailbox INBOX/Lists/Debian failed: Mailbox doesn't exist: INBOX/Lists/Debian doveadm(bar): Error: Syncing mailbox INBOX/Lists/Gentoo failed: Mailbox doesn't exist: INBOX/Lists/Gentoo 9630321bcb68044bd43f000035ca9452 282 8e30321bcb68044bd43f000035ca9452 63 8a30321bcb68044bd43f000035ca9452 425 8a30321bcb68044bd43f000035ca9452 426 8a30321bcb68044bd43f000035ca9452 427 8a30321bcb68044bd43f000035ca9452 428 8a30321bcb68044bd43f000035ca9452 429 doveadm(bar): Error: Syncing mailbox INBOX/Lists/Dovecot/Pigeonhole failed: Mailbox doesn't exist: INBOX/Lists/Dovecot/Pigeonhole doveadm(bar): Error: Syncing mailbox INBOX/Bugs failed: Mailbox doesn't exist: INBOX/Bugs Regards, Pascal -- The trapper recommends today: c01dcofe.1017215(a)localdomain.org

1 2

[Dovecot] Coredump while searching a folder
by Matthias Rieber 21 Jun '10

21 Jun '10

Hi, while searching through the message bodies in a real folder I got a coredump. I used the master user for this operation. dovecot.index* files have been removed before I started this operation. This looks a bit different to my previous report. Coredump: Program terminated with signal 6, Aborted. [New process 1628] #0 0x00002b5e82a8ced5 in raise () from /lib/libc.so.6 #0 0x00002b5e82a8ced5 in raise () from /lib/libc.so.6 No symbol table info available. #1 0x00002b5e82a8e3f3 in abort () from /lib/libc.so.6 No symbol table info available. #2 0x00002b5e8240cd65 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:164 backtrace = 0x126ef910 "/usr/local/lib/dovecot/libdovecot.so.0 [0x2b5e8240cd52] -> /usr/local/lib/dovecot/libdovecot.so.0 [0x2b5e8240cdba] -> /usr/local/lib/dovecot/libdovecot.so.0(i_error+0) [0x2b5e8240d163] -> /usr/local/l"... #3 0x00002b5e8240cdba in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=<value optimized out>, args=<value optimized out>) at failures.c:593 No locals. #4 0x00002b5e8240d163 in i_panic (format=<value optimized out>) at failures.c:230 args = {{gp_offset = 40, fp_offset = 48, overflow_arg_area = 0x7fffbc0b8d40, reg_save_area = 0x7fffbc0b8c80}} #5 0x00002b5e83e2ee6d in squat_build_word (ctx=0x127776e0, uid=574, data=0x126ef79f "\a\b\021�\n", char_lengths=0x126ef4b7 "\001\001\001\004\001\001", size=5) at squat-trie.c:876 trie = (struct squat_trie *) 0x12780460 i = 0 j = <value optimized out> bytelen = <value optimized out> __FUNCTION__ = "squat_build_word" #6 0x00002b5e83e2f0ba in squat_trie_build_more (ctx=0x127776e0, uid=<value optimized out>, type=<value optimized out>, input=0x145e2ed1 "<snip email-content sip>"..., size=744) at squat-trie.c:934 _data_stack_cur_id = 5 ret = <value optimized out> #7 0x00002b5e833e57e4 in fts_mailbox_search_next_nonblock (ctx=0x12777600, mail=0x1276d338, tryagain_r=0x7fffbc0b8f7f) at fts-storage.c:220 fctx = (struct fts_search_context *) 0x12731d60 ret = <value optimized out> #8 0x00002b5e821368e0 in mailbox_search_next_nonblock (ctx=0x65c, mail=0x65c, tryagain_r=0x6) at mail-storage.c:1125 No locals. #9 0x0000000000416014 in cmd_search_more (cmd=0x1272ae48) at imap-search.c:346 ctx = (struct imap_search_context *) 0x1272af58 opts = SEARCH_RETURN_ALL sync_flags = <value optimized out> end_time = {tv_sec = 0, tv_usec = 47684912286820} id = 3 id_min = 0 id_max = 0 time_msecs = <value optimized out> tryagain = <value optimized out> lost_data = <value optimized out> __FUNCTION__ = "cmd_search_more" #10 0x00000000004166e0 in cmd_search_more_callback (cmd=0x1272ae48) at imap-search.c:429 client = (struct client *) 0x1272a6e8 finished = <value optimized out> #11 0x00002b5e82416efb in io_loop_handle_timeouts (ioloop=0x126f75d0) at ioloop.c:328 _data_stack_cur_id = 2 #12 0x00002b5e82417a5f in io_loop_handler_run (ioloop=0x126f75d0) at ioloop-epoll.c:184 ctx = (struct ioloop_handler_context *) 0x126f77e0 event = <value optimized out> list = <value optimized out> io = <value optimized out> tv = {tv_sec = 0, tv_usec = 0} t_id = <value optimized out> msecs = 0 ret = 0 call = <value optimized out> #13 0x00002b5e82416c38 in io_loop_run (ioloop=0x126f75d0) at ioloop.c:350 No locals. #14 0x00002b5e82406673 in master_service_run (service=0x126f74a0, callback=0x65c) at master-service.c:496 No locals. #15 0x0000000000419171 in main (argc=1, argv=0x126f7370) at main.c:359 service_flags = <value optimized out> storage_service_flags = <value optimized out> postlogin_socket_path = 0x0 username = 0x0 c = <value optimized out> set_roots = {0x41c340, 0x0} #0 0x00002b5e82a8ced5 in raise () from /lib/libc.so.6 No symbol table info available. #1 0x00002b5e82a8e3f3 in abort () from /lib/libc.so.6 No symbol table info available. #2 0x00002b5e8240cd65 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:164 backtrace = 0x126ef910 "/usr/local/lib/dovecot/libdovecot.so.0 [0x2b5e8240cd52] -> /usr/local/lib/dovecot/libdovecot.so.0 [0x2b5e8240cdba] -> /usr/local/lib/dovecot/libdovecot.so.0(i_error+0) [0x2b5e8240d163] -> /usr/local/l"... #3 0x00002b5e8240cdba in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=<value optimized out>, args=<value optimized out>) at failures.c:593 No locals. #4 0x00002b5e8240d163 in i_panic (format=<value optimized out>) at failures.c:230 args = {{gp_offset = 40, fp_offset = 48, overflow_arg_area = 0x7fffbc0b8d40, reg_save_area = 0x7fffbc0b8c80}} #5 0x00002b5e83e2ee6d in squat_build_word (ctx=0x127776e0, uid=574, data=0x126ef79f "\a\b\021�\n", char_lengths=0x126ef4b7 "\001\001\001\004\001\001", size=5) at squat-trie.c:876 trie = (struct squat_trie *) 0x12780460 i = 0 j = <value optimized out> bytelen = <value optimized out> __FUNCTION__ = "squat_build_word" #6 0x00002b5e83e2f0ba in squat_trie_build_more (ctx=0x127776e0, uid=<value optimized out>, type=<value optimized out>, input=0x145e2ed1 "Von:\n", '-' <repeats 20 times>, "\nName: Johann Karl Steiner\nEmail: johann.karl.steiner(a)gmx.de\n", '-' <repeats 20 times>, "\nNachricht: (bitte Hinweise am Ende dieser NAchricht beachten)\n\nHallo, \n\nhaben Sie meine e-Mai"..., size=744) at squat-trie.c:934 _data_stack_cur_id = 5 ret = <value optimized out> #7 0x00002b5e833e57e4 in fts_mailbox_search_next_nonblock (ctx=0x12777600, mail=0x1276d338, tryagain_r=0x7fffbc0b8f7f) at fts-storage.c:220 fctx = (struct fts_search_context *) 0x12731d60 ret = <value optimized out> #8 0x00002b5e821368e0 in mailbox_search_next_nonblock (ctx=0x65c, mail=0x65c, tryagain_r=0x6) at mail-storage.c:1125 No locals. #9 0x0000000000416014 in cmd_search_more (cmd=0x1272ae48) at imap-search.c:346 ctx = (struct imap_search_context *) 0x1272af58 opts = SEARCH_RETURN_ALL sync_flags = <value optimized out> end_time = {tv_sec = 0, tv_usec = 47684912286820} id = 3 id_min = 0 id_max = 0 time_msecs = <value optimized out> tryagain = <value optimized out> lost_data = <value optimized out> __FUNCTION__ = "cmd_search_more" #10 0x00000000004166e0 in cmd_search_more_callback (cmd=0x1272ae48) at imap-search.c:429 client = (struct client *) 0x1272a6e8 finished = <value optimized out> #11 0x00002b5e82416efb in io_loop_handle_timeouts (ioloop=0x126f75d0) at ioloop.c:328 _data_stack_cur_id = 2 #12 0x00002b5e82417a5f in io_loop_handler_run (ioloop=0x126f75d0) at ioloop-epoll.c:184 ctx = (struct ioloop_handler_context *) 0x126f77e0 event = <value optimized out> list = <value optimized out> io = <value optimized out> tv = {tv_sec = 0, tv_usec = 0} t_id = <value optimized out> ret = 0 call = <value optimized out> #13 0x00002b5e82416c38 in io_loop_run (ioloop=0x126f75d0) at ioloop.c:350 No locals. #14 0x00002b5e82406673 in master_service_run (service=0x126f74a0, callback=0x65c) at master-service.c:496 No locals. #15 0x0000000000419171 in main (argc=1, argv=0x126f7370) at main.c:359 service_flags = <value optimized out> storage_service_flags = <value optimized out> postlogin_socket_path = 0x0 username = 0x0 c = <value optimized out> set_roots = {0x41c340, 0x0} doveconf -n # 2.0.beta6 (573cb66e9180): /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-028stab069.6 x86_64 Debian 5.0.4 auth_master_user_separator = * auth_username_format = %n disable_plaintext_auth = no mail_debug = yes mail_location = maildir:~/Maildir mail_plugins = virtual fts fts_squat zlib acl imap_acl namespace { hidden = yes inbox = no list = no location = prefix = mail separator = type = private } namespace { hidden = no inbox = yes location = prefix = separator = . type = private } namespace { hidden = yes inbox = no list = no location = prefix = INBOX. separator = . type = private } namespace { location = maildir:/home/sharedbox/Maildir:INDEX=~/Maildir/shared prefix = shared. separator = . type = public } namespace { list = children location = maildir:/home/%%n/Maildir:INDEX=~/Maildir/shared/%%u prefix = common.%%u. separator = . subscriptions = no type = shared } namespace { hidden = no list = yes location = virtual:~/Maildir/virtual prefix = virtual. separator = . subscriptions = yes type = private } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } passdb { args = /etc/dovecot/passwd.masterusers driver = passwd-file master = yes } plugin { acl = vfile:/etc/dovecot/acls:cache_secs=10 acl_shared_dict = file:/var/lib/dovecot/shared-mailboxes.db fts = squat fts_squat = partial=4 full=4 } protocols = imap pop3 service imap { vsz_limit = 1073741824 } ssl_cert = </etc/dovecot/imap.scheff32.de.pem ssl_key = </etc/dovecot/imap.scheff32.de.key userdb { args = system_groups_user=%u blocking=yes driver = passwd } Regards, Matthias

2 2

[Dovecot] quota and quota_warning
by Guillermo Botero 21 Jun '10

21 Jun '10

hi everyone, i have dovecot 1.2.11 and postfix with virtual users and domains and mailscanner all is working fine but i cant made works the quota_warning i have in my script touch quota to see is the script run but never hapen i have in dovecot-sql.conf 'storage=10%% /etc/postfix/limit.sh' as quota_warning and in the log he show this but nothing happend, anyone have this same problem and anyone have a server with virtual users and domains working with that?? thanks -- _____________________________ GUILLERMO BOTERO LETICIA, AMAZONAS (COLOMBIA) -- Este mensaje ha sido analizado por MailScanner en busca de virus y otros contenidos peligrosos, y se considera que est� limpio. For all your IT requirements visit: http://www.transtec.co.uk

1 0

[Dovecot] confused with %d/%n not working....
by William Ottley 21 Jun '10

21 Jun '10

Hi all, I'm trying to link in my "online" community of users, via mysql, with my mailserver. I have dovecot 1.0.7. I am using mysql to authenticate, and I'm trying to figure out what I should be doing to my sql query that checks the username which has a username field and a database field. everything works, as long as the username is "u%@d%" in the field, but to work with my other web application, the username is in one field, and the database is in another. can anyone make a suggestion as to how i can do the user_query to work this way? (both with dovecot and the postfix) any help would be greatly appreciated! dovecot: connect = host=localhost dbname=pplsnet user=xxxx password=xxxxxxx password_query = SELECT password FROM mailbox WHERE username = '%u' user_query = SELECT '/var/vmail/%d/%n' as home, 'maildir:/var/vmail/%d/%n' as mail, 150 AS uid, 12 AS gid, concat('dirsize:storage=',quota) AS quota FROM mailbox WHERE username ='%u' AND active ='1' postfix: user = mail password = xxxx hosts = localhost dbname = mail table = mailbox select_field = CONCAT(domain,'/',maildir) where_field = username additional_conditions = and active = '1'

1 0

Re: [Dovecot] [Dovecot 1.2.11(NFS used) & dovecot-antispam 1.2]: move message error
by Администр атор 20 Jun '10

20 Jun '10

>> No error with moving, but >> -------------->%------------ >> [19-Jun-2010 16:54:50 +0400]: C: cpy1 UID COPY >> 1761,1760,1759,1758,1757,1751,1750,1749,1748,1747,1746,1745,1744 "INBOX" >> [19-Jun-2010 16:54:56 +0400]: S: * OK [CAPABILITY IMAP4rev1 LITERAL+ >> SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN AUTH=LOGIN] >> Dovecot ready. >> --------------%<------------ >> Is this reply correct?? Or maybe its part of another request if Roundcube >> have something like multithreaded IMAP session?? > > I think this is from another request, e.g. check-recent action. It's really seems to be that. Big thanks for improvements in svn-trank Roundcube version, I am waiting for official release for update. Timo-san, which client most Dovecot compatible you think (non-Web)?? I want to do more tests.

1 0

[Dovecot] coredump while accessing virtual folder with dovecot 2.0
by Matthias Rieber 20 Jun '10

20 Jun '10

Hi, I get a core dump with 2.0.beta6 (573cb66e9180) when I access virtual folders with the master user. Since ACLs are active I have to set a global ACL in .DEFAULTS to access all folders. Coredump: Core was generated by `dovecot/imap'. Program terminated with signal 11, Segmentation fault. [New process 15910] #0 0x00002afabdfbd6a2 in virtual_config_free (mbox=0x10a34128) at ../../../src/lib/array.h:198 198 *count_r = array->buffer->used / array->element_size; #0 0x00002afabdfbd6a2 in virtual_config_free (mbox=0x10a34128) at ../../../src/lib/array.h:198 count = <value optimized out> #1 0x00002afabdfbf659 in virtual_mailbox_free (box=0x0) at virtual-storage.c:327 No locals. #2 0x00002afabddb4db4 in fts_mailbox_free (box=0x10a34128) at fts-storage.c:73 fbox = (struct fts_mailbox *) 0x10a36f20 #3 0x00002afabcb05db9 in mailbox_free (_box=<value optimized out>) at mail-storage.c:638 box = (struct mailbox *) 0x10a34128 #4 0x000000000040dfb9 in cmd_select_full (cmd=<value optimized out>, readonly=false) at cmd-select.c:287 client = (struct client *) 0x10a2e6e8 box = (struct mailbox *) 0x109f30b0 ctx = (struct imap_select_context *) 0x10a2ef50 args = (const struct imap_arg *) 0x10a316a0 list_args = (const struct imap_arg *) 0x2afabcdd9e2b status = MAILBOX_NAME_EXISTS_MAILBOX mailbox = 0x10a31790 "virtual.allsent" storage_name = 0x109f32b8 "allsent" ret = <value optimized out> __FUNCTION__ = "cmd_select_full" #5 0x000000000041036c in client_command_input (cmd=0x10a2ee48) at imap-client.c:643 client = (struct client *) 0x10a2e6e8 command = <value optimized out> __FUNCTION__ = "client_command_input" #6 0x000000000041041d in client_command_input (cmd=0x10a2ee48) at imap-client.c:693 client = (struct client *) 0x10a2e6e8 command = (struct command *) 0x0 __FUNCTION__ = "client_command_input" #7 0x0000000000410595 in client_handle_input (client=0x10a2e6e8) at imap-client.c:734 _data_stack_cur_id = 3 ret = 27 remove_io = <value optimized out> handled_commands = false __FUNCTION__ = "client_handle_input" #8 0x0000000000410fc2 in client_input (client=0x10a2e6e8) at imap-client.c:785 cmd = <value optimized out> output = (struct ostream *) 0x10a2ecc8 bytes = <value optimized out> __FUNCTION__ = "client_input" #9 0x00002afabcde6abb in io_loop_handler_run (ioloop=<value optimized out>) at ioloop-epoll.c:212 ctx = (struct ioloop_handler_context *) 0x109fb7e0 event = (const struct epoll_event *) 0x109fb850 list = (struct io_list *) 0x10a2eda0 io = (struct io_file *) 0x10a2ed60 tv = {tv_sec = 1799, tv_usec = 999059} t_id = 2 msecs = <value optimized out> ret = 1 call = <value optimized out> #10 0x00002afabcde5c38 in io_loop_run (ioloop=0x109fb5d0) at ioloop.c:350 No locals. #11 0x00002afabcdd5673 in master_service_run (service=0x109fb4a0, callback=0) at master-service.c:496 No locals. #12 0x0000000000419171 in main (argc=1, argv=0x109fb370) at main.c:359 service_flags = <value optimized out> storage_service_flags = <value optimized out> postlogin_socket_path = 0x0 username = 0x0 c = <value optimized out> set_roots = {0x41c340, 0x0} #0 0x00002afabdfbd6a2 in virtual_config_free (mbox=0x10a34128) at ../../../src/lib/array.h:198 count = <value optimized out> #1 0x00002afabdfbf659 in virtual_mailbox_free (box=0x0) at virtual-storage.c:327 No locals. #2 0x00002afabddb4db4 in fts_mailbox_free (box=0x10a34128) at fts-storage.c:73 fbox = (struct fts_mailbox *) 0x10a36f20 #3 0x00002afabcb05db9 in mailbox_free (_box=<value optimized out>) at mail-storage.c:638 box = (struct mailbox *) 0x10a34128 #4 0x000000000040dfb9 in cmd_select_full (cmd=<value optimized out>, readonly=false) at cmd-select.c:287 client = (struct client *) 0x10a2e6e8 box = (struct mailbox *) 0x109f30b0 ctx = (struct imap_select_context *) 0x10a2ef50 args = (const struct imap_arg *) 0x10a316a0 list_args = (const struct imap_arg *) 0x2afabcdd9e2b status = MAILBOX_NAME_EXISTS_MAILBOX mailbox = 0x10a31790 "virtual.allsent" storage_name = 0x109f32b8 "allsent" ret = <value optimized out> __FUNCTION__ = "cmd_select_full" #5 0x000000000041036c in client_command_input (cmd=0x10a2ee48) at imap-client.c:643 client = (struct client *) 0x10a2e6e8 command = <value optimized out> __FUNCTION__ = "client_command_input" #6 0x000000000041041d in client_command_input (cmd=0x10a2ee48) at imap-client.c:693 client = (struct client *) 0x10a2e6e8 command = (struct command *) 0x0 __FUNCTION__ = "client_command_input" #7 0x0000000000410595 in client_handle_input (client=0x10a2e6e8) at imap-client.c:734 _data_stack_cur_id = 3 ret = 27 remove_io = <value optimized out> handled_commands = false __FUNCTION__ = "client_handle_input" #8 0x0000000000410fc2 in client_input (client=0x10a2e6e8) at imap-client.c:785 cmd = <value optimized out> output = (struct ostream *) 0x10a2ecc8 bytes = <value optimized out> __FUNCTION__ = "client_input" #9 0x00002afabcde6abb in io_loop_handler_run (ioloop=<value optimized out>) at ioloop-epoll.c:212 ctx = (struct ioloop_handler_context *) 0x109fb7e0 event = (const struct epoll_event *) 0x109fb850 list = (struct io_list *) 0x10a2eda0 io = (struct io_file *) 0x10a2ed60 tv = {tv_sec = 1799, tv_usec = 999059} t_id = 2 msecs = <value optimized out> ret = 1 call = <value optimized out> #10 0x00002afabcde5c38 in io_loop_run (ioloop=0x109fb5d0) at ioloop.c:350 No locals. #11 0x00002afabcdd5673 in master_service_run (service=0x109fb4a0, callback=0) at master-service.c:496 No locals. #12 0x0000000000419171 in main (argc=1, argv=0x109fb370) at main.c:359 service_flags = <value optimized out> storage_service_flags = <value optimized out> postlogin_socket_path = 0x0 username = 0x0 c = <value optimized out> set_roots = {0x41c340, 0x0} doveconf output: # 2.0.beta6 (573cb66e9180): /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-028stab069.6 x86_64 Debian 5.0.4 auth_anonymous_username = anonymous auth_cache_negative_ttl = 0 s auth_cache_size = 0 auth_cache_ttl = 3600 s auth_debug = no auth_debug_passwords = no auth_default_realm = auth_failure_delay = 2 s auth_gssapi_hostname = auth_krb5_keytab = auth_master_user_separator = * auth_mechanisms = plain auth_realms = auth_socket_path = auth-userdb auth_ssl_require_client_cert = no auth_ssl_username_from_cert = no auth_use_winbind = no auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ auth_username_format = %n auth_username_translation = auth_verbose = no auth_verbose_passwords = no auth_winbind_helper_path = /usr/bin/ntlm_auth auth_worker_max_count = 30 base_dir = /usr/local/var/run/dovecot config_cache_size = 1048576 debug_log_path = default_client_limit = 1000 default_internal_user = dovecot default_login_user = dovenull default_process_limit = 100 default_vsz_limit = 268435456 deliver_log_format = msgid=%m: %$ dict_db_config = director_mail_servers = director_servers = director_user_expire = 900 s disable_plaintext_auth = no dotlock_use_excl = no first_valid_gid = 1 first_valid_uid = 500 fsync_disable = no hostname = imap_capability = imap_client_workarounds = imap_id_log = imap_id_send = imap_idle_notify_interval = 120 s imap_logout_format = bytes=%i/%o imap_max_line_length = 65536 info_log_path = last_valid_gid = 0 last_valid_uid = 0 lda_mailbox_autocreate = no lda_mailbox_autosubscribe = no libexec_dir = /usr/local/libexec/dovecot listen = *, :: lmtp_proxy = no lock_method = fcntl log_path = syslog log_timestamp = %b %d %H:%M:%S login_access_sockets = login_greeting = Dovecot ready. login_log_format = %$: %s login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c login_trusted_networks = mail_access_groups = mail_cache_fields = flags mail_cache_min_mail_count = 0 mail_chroot = mail_debug = yes mail_full_filesystem_access = no mail_gid = mail_home = mail_location = maildir:~/Maildir mail_log_prefix = %s(%u): mail_max_keyword_length = 50 mail_max_userip_connections = 10 mail_never_cache_fields = imap.envelope mail_nfs_index = no mail_nfs_storage = no mail_plugin_dir = /usr/local/lib/dovecot mail_plugins = virtual fts fts_squat zlib acl imap_acl mail_privileged_group = mail_save_crlf = no mail_uid = mailbox_idle_check_interval = 30 s mailbox_list_index_disable = no maildir_copy_with_hardlinks = yes maildir_stat_dirs = no maildir_very_dirty_syncs = no master_user_separator = mbox_dirty_syncs = yes mbox_dotlock_change_timeout = 120 s mbox_lazy_writes = yes mbox_lock_timeout = 300 s mbox_min_index_size = 0 mbox_read_locks = fcntl mbox_very_dirty_syncs = no mbox_write_locks = dotlock fcntl mdbox_rotate_interval = 0 s mdbox_rotate_size = 2097152 mmap_disable = no namespace { hidden = yes inbox = no list = no location = prefix = mail separator = subscriptions = yes type = private } namespace { hidden = no inbox = yes list = yes location = prefix = separator = . subscriptions = yes type = private } namespace { hidden = yes inbox = no list = no location = prefix = INBOX. separator = . subscriptions = yes type = private } namespace { hidden = no inbox = no list = yes location = maildir:/home/sharedbox/Maildir:INDEX=~/Maildir/shared prefix = shared. separator = . subscriptions = yes type = public } namespace { hidden = no inbox = no list = children location = maildir:/home/%%n/Maildir:INDEX=~/Maildir/shared/%%u prefix = common.%%u. separator = . subscriptions = no type = shared } namespace { hidden = no inbox = no list = yes location = virtual:~/Maildir/virtual prefix = virtual. separator = . subscriptions = yes type = private } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext deny = no driver = ldap master = no pass = no } passdb { args = /etc/dovecot/passwd.masterusers deny = no driver = passwd-file master = yes pass = no } plugin { acl = vfile:/etc/dovecot/acls:cache_secs=10 acl_shared_dict = file:/var/lib/dovecot/shared-mailboxes.db fts = squat fts_squat = partial=4 full=4 } pop3_client_workarounds = pop3_enable_last = no pop3_lock_session = no pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_no_flag_updates = no pop3_reuse_xuidl = no pop3_save_uidl = no pop3_uidl_format = %08Xu%08Xv postmaster_address = protocols = imap pop3 quota_full_tempfail = no recipient_delimiter = + rejection_reason = Your message to <%t> was automatically rejected:%n%r rejection_subject = Rejected: %s sendmail_path = /usr/sbin/sendmail service anvil { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = anvil extra_groups = group = privileged_group = process_limit = 1 process_min_avail = 1 protocol = service_count = 0 type = anvil unix_listener anvil-auth-penalty { group = mode = 0600 user = } unix_listener anvil { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 4294967295 } service auth-worker { chroot = client_limit = 1 drop_priv_before_exec = no executable = auth -w extra_groups = group = privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener auth-worker { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 4294967295 } service auth { chroot = client_limit = 4096 drop_priv_before_exec = no executable = auth extra_groups = group = privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener auth-client { group = mode = 0600 user = } unix_listener auth-login { group = mode = 0600 user = $default_internal_user } unix_listener auth-master { group = mode = 0600 user = } unix_listener auth-userdb { group = mode = 0600 user = } unix_listener login/login { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 4294967295 } service config { chroot = client_limit = 0 drop_priv_before_exec = no executable = config extra_groups = group = privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = config unix_listener config { group = mode = 0600 user = } user = vsz_limit = 4294967295 } service dict { chroot = client_limit = 1 drop_priv_before_exec = no executable = dict extra_groups = group = privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dict { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 4294967295 } service director { chroot = client_limit = 0 drop_priv_before_exec = no executable = director extra_groups = fifo_listener login/proxy-notify { group = mode = 00 user = } group = privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener director-admin { group = mode = 0600 user = } unix_listener login/director { group = mode = 00 user = } user = $default_internal_user vsz_limit = 4294967295 } service dns_client { chroot = client_limit = 1 drop_priv_before_exec = no executable = dns-client extra_groups = group = privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dns-client { group = mode = 0666 user = } unix_listener login/dns-client { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 4294967295 } service imap-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = imap-login extra_groups = group = inet_listener imap { address = port = 143 ssl = no } inet_listener imaps { address = port = 993 ssl = yes } privileged_group = process_limit = 0 process_min_avail = 0 protocol = imap service_count = 1 type = login user = $default_login_user vsz_limit = 64 } service imap { chroot = client_limit = 1 drop_priv_before_exec = no executable = imap extra_groups = group = privileged_group = process_limit = 1024 process_min_avail = 0 protocol = imap service_count = 1 type = unix_listener login/imap { group = mode = 0666 user = } user = vsz_limit = 1073741824 } service lmtp { chroot = client_limit = 0 drop_priv_before_exec = no executable = lmtp extra_groups = group = privileged_group = process_limit = 0 process_min_avail = 0 protocol = lmtp service_count = 0 type = unix_listener lmtp { group = mode = 0666 user = } user = vsz_limit = 0 } service log { chroot = client_limit = 0 drop_priv_before_exec = no executable = log extra_groups = group = privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = log user = vsz_limit = 4294967295 } service pop3-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = pop3-login extra_groups = group = inet_listener pop3 { address = port = 110 ssl = no } inet_listener pop3s { address = port = 995 ssl = yes } privileged_group = process_limit = 0 process_min_avail = 0 protocol = pop3 service_count = 1 type = login user = $default_login_user vsz_limit = 64 } service pop3 { chroot = client_limit = 1 drop_priv_before_exec = no executable = pop3 extra_groups = group = privileged_group = process_limit = 1024 process_min_avail = 0 protocol = pop3 service_count = 1 type = unix_listener login/pop3 { group = mode = 0666 user = } user = vsz_limit = 4294967295 } service ssl-params { chroot = client_limit = 0 drop_priv_before_exec = no executable = ssl-params extra_groups = group = privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener login/ssl-params { group = mode = 0666 user = } user = vsz_limit = 4294967295 } shutdown_clients = yes ssl = yes ssl_ca = ssl_cert = </etc/dovecot/imap.zu-con.org.pem ssl_cert_username_field = commonName ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL ssl_key = </etc/dovecot/imap.zu-con.org.key ssl_key_password = ssl_parameters_file = ssl-parameters.dat ssl_parameters_regenerate = 168 ssl_require_client_cert = no ssl_username_from_cert = no ssl_verify_client_cert = no syslog_facility = mail userdb { args = system_groups_user=%u blocking=yes driver = passwd } valid_chroot_dirs = verbose_auth = no verbose_proctitle = no verbose_ssl = no version_ignore = no Regards, Matthias

2 2

Re: [Dovecot] [Dovecot 1.2.11(NFS used) & dovecot-antispam 1.2]: move message error
by Администр атор 20 Jun '10

20 Jun '10

Seems svn-trunk really much better =) Before this we use 0.3 stable and 0.4 beta - error occurred. IMAP debug with svn-trunk: -------------->%------------ ... [16:54:50]: C: cpy1 UID COPY 1761,1760,1759,1758,1757,1751,1750,1749,1748,1747,1746,1745,1744 "INBOX" [16:54:56]: S: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN AUTH=LOGIN] Dovecot ready. [16:54:56]: C: cp01 CAPABILITY [16:54:56]: S: * CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=R EFERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARC H ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS QUOTA AUTH=PLAIN AUTH=LOGIN [16:54:56]: S: cp01 OK Capability completed. [16:54:56]: C: a001 LOGIN "dark(a)aspu.ru" "3784586" [16:54:56]: S: a001 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY T HREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS QUOTA] Logged in [16:54:56]: C: sel1 SELECT "Junk" [16:54:56]: S: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) [16:54:56]: S: * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. [16:54:56]: S: * 1536 EXISTS [16:54:56]: S: * 0 RECENT [16:54:56]: S: * OK [UNSEEN 1483] First unseen. [16:54:56]: S: * OK [UIDVALIDITY 1273276432] UIDs valid [16:54:56]: S: * OK [UIDNEXT 1762] Predicted next UID [16:54:56]: S: * OK [HIGHESTMODSEQ 43] Highest [16:54:56]: S: sel1 OK [READ-WRITE] Select completed. [16:54:56]: C: fuid FETCH 1536 (UID) [16:54:56]: S: * 1536 FETCH (UID 1761) [16:54:56]: S: fuid OK Fetch completed. [16:54:56]: C: srch1 SEARCH ALL UNSEEN [16:54:56]: S: * SEARCH 1483 1484 1485 1486 1491 1492 1493 1494 1496 1497 1498 1499 1500 1501 1502 1503 150 4 1505 1506 1507 1509 1510 1511 1512 1513 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 153 1 1532 1533 1534 1535 1536 [16:54:56]: S: srch1 OK Search completed (0.000 secs). [16:54:56]: C: I LOGOUT [16:55:01]: S: cpy1 OK [COPYUID 1273276429 1744:1751,1757:1761 610:622] Copy completed. [16:55:01]: C: flg UID STORE 1761,1760,1759,1758,1757,1751,1750,1749,1748,1747,1746,1745,1744 +FLAGS (\Dele ted) [16:55:01]: S: * 1524 FETCH (UID 1744 FLAGS (\Deleted)) [16:55:01]: S: * 1525 FETCH (UID 1745 FLAGS (\Deleted)) [16:55:01]: S: * 1526 FETCH (UID 1746 FLAGS (\Deleted)) [16:55:01]: S: * 1527 FETCH (UID 1747 FLAGS (\Deleted)) [16:55:01]: S: * 1528 FETCH (UID 1748 FLAGS (\Deleted)) [16:55:01]: S: * 1529 FETCH (UID 1749 FLAGS (\Deleted)) [16:55:01]: S: * 1530 FETCH (UID 1750 FLAGS (\Deleted)) [16:55:01]: S: * 1531 FETCH (UID 1751 FLAGS (\Deleted)) [16:55:01]: S: * 1532 FETCH (UID 1757 FLAGS (\Deleted)) [16:55:01]: S: * 1533 FETCH (UID 1758 FLAGS (\Deleted)) [16:55:01]: S: * 1534 FETCH (UID 1759 FLAGS (\Deleted)) [16:55:01]: S: * 1535 FETCH (UID 1760 FLAGS (\Deleted)) [16:55:01]: S: * 1536 FETCH (UID 1761 FLAGS (\Deleted)) [16:55:01]: S: flg OK Store completed. [16:55:01]: C: exp1 UID EXPUNGE 1761,1760,1759,1758,1757,1751,1750,1749,1748,1747,1746,1745,1744 [16:55:01]: S: * 1536 EXPUNGE [16:55:01]: S: * 1535 EXPUNGE [16:55:01]: S: * 1534 EXPUNGE [16:55:01]: S: * 1533 EXPUNGE [16:55:01]: S: * 1532 EXPUNGE [16:55:01]: S: * 1531 EXPUNGE [16:55:01]: S: * 1530 EXPUNGE [16:55:01]: S: * 1529 EXPUNGE [16:55:01]: S: * 1528 EXPUNGE [16:55:01]: S: * 1527 EXPUNGE [16:55:01]: S: * 1526 EXPUNGE [16:55:01]: S: * 1525 EXPUNGE [16:55:01]: S: * 1524 EXPUNGE [16:55:01]: S: exp1 OK Expunge completed. [16:55:01]: C: sel1 SELECT "Junk" [16:55:01]: S: * OK [CLOSED] Previous mailbox closed. [16:55:01]: S: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) ... --------------%<------------ No error with moving, but -------------->%------------ [19-Jun-2010 16:54:50 +0400]: C: cpy1 UID COPY 1761,1760,1759,1758,1757,1751,1750,1749,1748,1747,1746,1745,1744 "INBOX" [19-Jun-2010 16:54:56 +0400]: S: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN AUTH=LOGIN] Dovecot ready. --------------%<------------ Is this reply correct?? Or maybe its part of another request if Roundcube have something like multithreaded IMAP session?? Moving messages using other folder (where dovecot-antispam not used) works perfect.

2 1

[Dovecot] Sieve isn't working
by Steven Weiß 20 Jun '10

20 Jun '10

Hi, I tried to get Sieve plugin running but I don't get it to work and actually have no idea what's wrong. My dovecot version is 1.2.12 and dovecot -n prints this: # 1.2.12: /usr/local/etc/dovecot.conf # OS: Linux 2.6.18-028stab064.7 i686 openSUSE 11.1 (i586) reiserfs log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot.log disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login first_valid_uid: 110 last_valid_uid: 110 mail_location: maildir:/var/qmail/mailnames/%d/%n/Maildir fsync_disable: yes lda: postmaster_address: postmaster(a)code-factory.de mail_plugins: sieve mail_plugin_dir: /usr/local/lib/dovecot/lda fsync_disable: no auth default: passdb: driver: passwd-file args: /usr/local/etc/passwd.dovecot userdb: driver: passwd userdb: driver: static args: uid=popuser gid=popuser plugin: sieve: /var/mail/mydomain/.dovecot.sieve sieve_global_path: /var/lib/dovecot/sieve/default.sieve sieve_dir: /var/mail/mydomain/sieve sieve_global_dir: /var/lib/dovecot/sieve/global/ For testing purposes I created a very simple /var/mail/mydomain/.dovecot.sieve with the following content: require ["fileinto", "regex"]; if address :is "from" "test(a)test.de" { fileinto "INBOX.Webi"; stop; } Then I sent a mail from test(a)test.de (the real address is ommitted here) to my mail account, but the mail is not moved to the subfolder Webi. In the log files there's no single hint what's going on. And in /var/mail/mydomain there's no .dovecot.sieve.log file. This directory is owned by popuser and that user has rights for reading and writing to this directory (and read rights for .dovecot.sieve), therefore it should not be a rights problem. Does anybody has suggestions what could be the cause of this? Sincerely, Steven

2 5

[Dovecot] Released Pigeonhole Sieve v0.1.17 for Dovecot v1.2.12
by Stephan Bosch 19 Jun '10

19 Jun '10

Hello Dovecot users, The new Dovecot v1.2 release is a good occasion to release a new Pigeonhole Sieve package with some relatively minor bug fixes. Changelog Sieve v0.1.17: - Made sure source code positions for compiler messages are recorded at start of tokens. - Fixed a few potential memory leaks in the Sieve compiler and the spam/virustest extensions. - Made command line tools return proper exit status upon failure. The release is available as follows: http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-sieve-0.1.17.tar.gz http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-sieve-0.1.17.tar.gz.sig Refer to http://pigeonhole.dovecot.org for more information. Have fun testing the new releases and don't hesitate to notify me when there are problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

1 0

[Dovecot] v1.2.12 released
by Timo Sirainen 19 Jun '10

19 Jun '10

http://dovecot.org/releases/1.2/dovecot-1.2.12.tar.gz http://dovecot.org/releases/1.2/dovecot-1.2.12.tar.gz.sig Some of the most important fixes since v1.2.11: - deliver: Don't crash when a message with Auto-submitted: header gets rejected. - lib-storage: Fixed header searches to work correctly when there are multiple headers with same name. - dict client: Disconnect from dict server after 1 second of idling. - dict: If process crashed, it wasn't automatically restarted - dict file: If dict file's group permissions equal world permissions, don't try to change its gid. - maildir: Fixed a memory leak when copying with hardlinks. - maildir: Expunging last messages may have assert-crashed if their filenames had just changed.

2 1

[Dovecot] [Dovecot 1.2.11(NFS used) & dovecot-antispam 1.2]: move message error
by Администр атор 19 Jun '10

19 Jun '10

Hello! I am really need help! I am using dovecot installation on ~700 users with dspam integration via dovecot-antispam plugin. Problem in unpredictable result of moving spam-mails from INBOX to Junk and from Junk to INBOX. In some cases it works fine, but sometimes I see error like "It's not possible to move the message" in client (roundcube). Two different samples on same configuration/server. Moving from INBOX into Junk. 1. Successful moving (roundcube imap debug): -------------%<------------ [19:05:35]: C: cpy1 UID COPY 2387 "Junk" [19:05:35]: S: cpy1 OK [COPYUID 1273276423 2387 1280] Copy completed. [19:05:35]: C: flg UID STORE 2387 +FLAGS (\Deleted) [19:05:35]: S: * 1471 FETCH (UID 2387 FLAGS (\Deleted \Seen)) [19:05:35]: S: flg OK Store completed. [19:05:35]: C: exp1 UID EXPUNGE 2387 [19:05:35]: S: * 1471 EXPUNGE [19:05:35]: S: exp1 OK Expunge completed. Result: message moved into Junk, dspam retrained. Success. ------------->%------------ 2. Unsuccessful moving -------------%<------------ [19:02:47]: C: cpy1 UID COPY 2386 "Junk" [19:02:57]: S: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN AUTH=LOGIN] Dovecot ready. [19:02:57]: C: cp01 CAPABILITY [19:02:57]: S: * CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=RE FERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS QUOTA AUTH=PLAIN AUTH=LOGIN [19:02:57]: S: cp01 OK Capability completed. Result: I see moving error in roundcube. Sometimes I see several duplicates of original message in Junk and original message also presented in INBOX. Malfunction. ------------->%------------ Similar symptoms also affected while moving message from Junk into INBOX. One more sample. Junk -> INBOX moving. -------------%<------------ [20:20:16]: C: cpy1 UID COPY 2859 "INBOX" [20:20:20]: S: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN AUTH=LOGIN] Dovecot ready. [20:20:20]: C: cp01 CAPABILITY [20:20:20]: S: * CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=RE FERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS QUOTA AUTH=PLAIN AUTH=LOGIN [20:20:20]: S: cp01 OK Capability completed. Result: move failure. Duplicates in INBOX. ------------->%------------ Mails stored on NFS server - Ubuntu 9.10 (Linux storage01 2.6.31-21-generic-pae #59-Ubuntu SMP Wed Mar 24 08:47:55 UTC 2010 i686 GNU/Linux). Indexes now stored locally, but I already try to store them on NFS. No difference. Dovecot and NFS client running under FreeBSD 8. -------------%<------------ mail01#uname -a FreeBSD mail01.domain.net 8.0-RELEASE FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009 root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 ------------->%------------ Mount options. Two variant: 1. 192.164.100.103:/mnt/storage/mailstores /var/mail/mymail nfs rw,acregmin=0,acregmax=0,acdirmin=0,acdirmax=0 0 0 2(current). 192.164.100.103:/mnt/storage/mailstores /var/mail/mymail nfs rw,bg,tcp,nosuid 0 0 In both variants error detected. -------------%<------------ mail01# dovecot --version 1.2.11 mail01# pkg_info | grep dspam dovecot-antispam-1.2_4,1 Dovecot plugin to train dspam about spam or false positives dspam-3.9.0_1 Bayesian spam filter - stable maintenance version ------------->%------------ Dspam build with direct dspam training possibility, debug and debug_verbose options. All installed from ports. Current dovecot configuration: -------------%<------------ mail01# dovecot -n # 1.2.11: /usr/local/etc/dovecot.conf # OS: FreeBSD 8.0-RELEASE i386 nfs base_dir: /var/run/dovecot/ log_path: /var/log/dovecot/dovecot.log protocols: imap pop3 ssl: no disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_max_processes_count: 256 verbose_proctitle: yes first_valid_uid: 1 last_valid_uid: 10000 last_valid_gid: 10000 mail_privileged_group: mail mail_uid: dovecot mail_gid: mail mail_location: maildir:/var/mail/mymail/%d/%n:INDEX=/var/mail/indexes/%d/%n mail_debug: yes mail_nfs_storage: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota convert antispam autocreate mail_plugins(imap): quota imap_quota convert antispam autocreate mail_plugins(pop3): quota convert autocreate mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh lda: postmaster_address: admin(a)domain.net hostname: mail.domain2.net mail_plugins: quota mail_plugin_dir: /usr/local/lib/dovecot/lda quota_full_tempfail: yes sendmail_path: /usr/sbin/sendmail rejection_reason: Your message to <%t> was automatically rejected:%n%r auth_socket_path: /var/run/dovecot/auth-master log_path: /var/log/dovecot/dovecot-deliver.log info_log_path: /var/log/dovecot/dovecot-deliver.log auth default: mechanisms: plain login default_realm: domain.net username_format: %Lu failure_delay: 3 verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /usr/local/etc/dovecot-sql.conf userdb: driver: sql args: /usr/local/etc/dovecot-sql.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 438 master: path: /var/run/dovecot/auth-master mode: 384 user: mailnull group: mail plugin: quota_rule: *:storage=50M quota: maildir convert_mail: mbox:/var/mail/old/%u antispam_signature: X-DSPAM-Signature antispam_spam: Junk antispam_trash: Trash antispam_signature_missing: move antispam_dspam_result_header: X-DSPAM-Result antispam_allow_append_to_spam: yes antispam_dspam_binary: /usr/local/bin/dspam antispam_dspam_args: --user;%u antispam_mail_tmpdir: /tmp autocreate: Trash autocreate2: Junk autocreate3: Sent autocreate4: Drafts autosubscribe: Trash autosubscribe2: Junk autosubscribe3: Sent autosubscribe4: Drafts ------------->%------------ User, maildir size independence. Any ideas? What cause? What can do with this? Really need to solve it.

3 5

[Dovecot] User Can't Access Public Folder
by Asai 19 Jun '10

19 Jun '10

Greetings, I have set up some public folders for Thunderbird, and one user in particular cannot access the shared folders. This is the message I get from /var/log/maillog (I should add that the domain name is over 35 characters long!): Jun 18 14:38:23 triata dovecot: IMAP(user(a)mydomain.com): Panic: file maildir-uidlist.c: line 1242 (maildir_uidlist_records_drop_expunges): assertion failed: (recs[i]->uid < rec->uid) Jun 18 14:38:23 triata dovecot: IMAP(user(a)mydomain.com): Raw backtrace: imap [0x49ec70] -> imap [0x49ecd3] -> imap [0x49e336] -> imap [0x440ced] -> imap(maildir_uidlist_sync_finish+0x28a) [0x44183a] -> imap [0x43c9c1] -> imap(maildir_storage_sync_init+0x14e) [0x43ce2e] -> imap(mailbox_sync+0x30) [0x467250] -> imap(cmd_select_full+0x1ae) [0x41e00e] -> imap(cmd_select+0xb) [0x41e8eb] -> imap [0x42086c] -> imap [0x420922] -> imap(client_handle_input+0x3f) [0x420a5f] -> imap(client_input+0x5f) [0x4215af] -> imap(io_loop_handler_run+0xf8) [0x4a6af8] -> imap(io_loop_run+0x1d) [0x4a5c0d] -> imap(main+0x620) [0x428e50] -> /lib64/libc.so.6(__libc_start_main+0xf4) [0x3c8861d8a4] -> imap [0x419ac9] Jun 18 14:38:23 triata dovecot: dovecot: child 5272 (imap) killed with signal 6 (core dumps disabled) -- asai

2 2

[Dovecot] Dovecot 2.0 auth socket error
by Tim Traver 18 Jun '10

18 Jun '10

Hi Timo, ok, when dovecot starts up, it creates the socket files in /usr/local/var/run/dovecot for the auth and a variety of other socket stuff you have going on. It creates these socket files with root ownership. But I have in the config files that dovecot is running as a particular user (in this case uid100 and gid100) to match the global mail systems needs. I use qmail as the delivery agent, and when qmail envokes deliver, I get the following errors in the qmail log files : @400000004c1b18f22ea7a05c delivery 1497: deferral: lda:_Error:_userdb_lookup:_connect(/usr/local/var/run/dovecot/auth-userdb)_failed:_Permission_denied_(euid=100(sn)_egid=100(sn)_missing_+w_perm:_/usr/local/var/run/dovecot/auth-userdb,_euid_is_not_dir_owner)/lda:_Fatal:_Internal_error_occurred._Refer_to_server_log_for_more_information./ Now, from what I can tell, this is complaining that the socket doesn't have write permission for the group, because it is owned by root and created with only 600 permissions...I can chmod the file to add the rw for the group, and then it appears to start working ok, but if I stop and start dovecot, it will only re-create those files with the 600 permissions... It appears that this is not happening in the version 1.2.11 code base as I this machine is a new one that I am testing 2.0 code on... Am I missing a proper setting somewhere? here is my dovecot -l : # 2.0.beta6: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.0-RELEASE-p3 i386 auth_username_format = %Lu auth_username_translation = %@ auth_verbose = yes disable_plaintext_auth = no dotlock_use_excl = yes first_valid_uid = 100 listen = * lock_method = dotlock log_path = /local/logs/dovecot.errors mail_gid = 100 mail_location = maildir:%h/Maildir mail_nfs_index = yes mail_nfs_storage = yes mail_uid = 100 mmap_disable = yes passdb { args = /bin/checkpassword_dovecot_auth driver = checkpassword } plugin { quota = maildir sieve = ~/.dovecot.sieve sieve_dir = ~/Maildir/sieve } protocols = imap pop3 managesieve quota_full_tempfail = yes ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = prefetch } userdb { args = /bin/checkpassword_dovecot_deliver driver = checkpassword } verbose_proctitle = yes protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { mail_plugins = quota sieve } protocol imap { mail_plugins = quota imap_quota } Thanks, Tim.

3 5

[Dovecot] strange regex sieve filter error
by Tim Traver 18 Jun '10

18 Jun '10

Hi all, ok, I'm getting an error produced by the following sieve file : require ["fileinto","copy"]; # rule:[SPAM-TAG] if allof ( header :regex "Subject" "^\\[SPAM-TAG\\]") { fileinto "SPAM-TAG"; stop; } and I'm getting the following error in the dovecot delivery log : main_script: line 3: error: unknown tagged argument ':regex' for the header test (reported only once at first occurence). main_script: error: validation failed. But I looked up the syntax, and tried to figure out why this is getting the error. I guess I just don't quite know what this error means... I know that the value that it is trying to match is kind of strange, but it is a regular expression, so it should work... Thanks, Tim.

2 2

[Dovecot] Help with a generated sieve rule
by Marcio Merlone 18 Jun '10

18 Jun '10

Hi all, Can some kind soul please help me find why this rule did not work, what's wrong? I am using dovecot 1:1.2.10-0xk1. ## Generated by RoundCube Webmail SieveRules Plugin ## require ["vacation","variables"]; set "subject" ""; if header :matches "subject" "*" { set "subject" "${1}"; } # rule:[Treinamento] if anyof (true) { vacation :days 1 :subject "Ausência: ${subject}" text: Olá! Estou em treinamento externo durante o período de 21 a 25 de junho. Att, . ; } mail.log: Jun 18 10:07:02 netuno postfix/smtpd[10722]: 6372A16073: client=mic-062.a1.ind.br[192.168.0.4], sasl_method=PLAIN, sasl_username=marcio.merlone Jun 18 10:07:02 netuno postfix/cleanup[10724]: 6372A16073: message-id=<4C1B6F7A.6000703(a)a1.ind.br> Jun 18 10:07:02 netuno postfix/qmgr[4964]: 6372A16073: from=<marcio.merlone(a)a1.ind.br>, size=888, nrcpt=1 (queue active) Jun 18 10:07:02 netuno dovecot: deliver(queila.farias): sieve: msgid=<4C1B6F7A.6000703(a)a1.ind.br>: stored mail into mailbox 'INBOX' Jun 18 10:07:02 netuno postfix/local[10725]: 6372A16073: to=<queila.farias(a)a1.ind.br>, relay=local, delay=1, delays=0.96/0.01/0/0.05, dsn=2.0.0, status=sent (delivered to command: /usr/lib/dovecot/deliver) Jun 18 10:07:02 netuno postfix/qmgr[4964]: 6372A16073: removed Thanks very much for any help, hint. -- Marcio Merlone

3 5

[Dovecot] Problem configuring rawlog with 2.0beta6
by Mark Sapiro 18 Jun '10

18 Jun '10

The initial problem I was seeing after upgrade from 2.0beta5 to 2.0beta6 was error messages from my Android phone K9 client that dovecot was reporting -1 messages in various mailboxes. These mailboxes do have the special "Mail System Internal Data" message in them. In trying to get more information for debugging, I tried toenable rawlog using the same configuration I used successfully with 2.0beta5, namely: service imap { executable = imap imap-postlogin } service imap-postlogin { executable = script rawlog unix_listener imap-postlogin { } } (full dovecot -n below), but instead of successful rawlog writes, I got the following log messages: Jun 16 19:46:36 sbh16 dovecot: script: Fatal: Client not compatible with this binary (connecting to wrong socket?) Jun 16 19:46:36 sbh16 dovecot: imap: Error: fd_read(/usr/local/var/run/dovecot/imap-postlogin) failed: disconnected So the first question is how do I configure rawlog for 2.0beta6? And the next question is why the "-1 messages". Here's dovecot -n # dovecot -n # 2.0.beta6: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.18-8.1.14.el5 i686 CentOS release 5 (Final) auth_mechanisms = plain apop login auth_worker_max_count = 5 mail_location = mbox:~/Mail:INBOX=/var/spool/mail/%u mail_privileged_group = mail mbox_write_locks = fcntl dotlock passdb { args = /usr/local/etc/dovecot.passwd driver = passwd-file } passdb { driver = pam } protocols = imap pop3 service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } } service imap-postlogin { executable = script rawlog } service imap { executable = imap imap-postlogin } ssl_cert = </etc/postfix/sbh16-cert.pem ssl_key = </etc/postfix/sbh16-key.pem userdb { driver = passwd } protocol imap { mail_max_userip_connections = 30 } -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 3

[Dovecot] Dovecot 1.1.x and 1.2.x differencies
by Veiko Kukk 18 Jun '10

18 Jun '10

Hello, I have been using successfully Dovecot 1.1.x for about a year now. It has been very stable. Now I'm uprading that same system to newer and more powerful hardware and I was wondering whether it is good idea or not to switch to Dovecot 1.2.x series. Could anybody direct me to feature comparision document or explain here main differences betweeen thos two branches? -- Veiko

15 39

[Dovecot] LDA to address extensions
by Martijn de Munnik 18 Jun '10

18 Jun '10

Hi List, I'm trying to make dovecot deliver messages to sam+extension(a)example.com to the imap folder 'extension' of the user 'sam'. I've configured postfix with these dovecot as LDA: mailbox_command = /opt/redknot/libexec/dovecot/deliver -f "$SENDER" -d "$USER" -m "$EXTENSION" -a "$RECIPIENT" recipient_delimiter = + Sam is a local system user so I don't want to use virtual_transport (I think). I've read http://wiki.dovecot.org/LDA/Postfix but so far without success. # 1.2.11: /etc/opt/redknot/dovecot.conf Warning: There is no way to login to this server: disable_plaintext_auth=yes, ssl=no, no non-plaintext auth mechanisms. # OS: SunOS 5.11 sun4v log_path: /var/log/dovecot.log ssl: no login_dir: /opt/redknot/var/run/dovecot/login login_executable: /opt/redknot/libexec/dovecot/imap-login login_max_processes_count: 10 max_mail_processes: 10 mail_location: maildir:~/Maildir lda: postmaster_address: postmaster(a)redknot.nl mail_plugins: sieve mail_plugin_dir: /opt/redknot/lib/dovecot/lda sendmail_path: /usr/sbin/sendmail auth_socket_path: /opt/redknot/var/run/dovecot/auth-master auth default: passdb: driver: pam args: other userdb: driver: passwd socket: type: listen master: path: /opt/redknot/var/run/dovecot/auth-master mode: 384 plugin: sieve_before: /etc/opt/redknot/sieve/before sieve_after: /etc/opt/redknot/sieve/after I know about the warning, this dovecot is only used as LDA, not for imap or pop3. thanks, Martijn YoungGuns Kasteleinenkampweg 7b 5222 AX 's-Hertogenbosch T. 073 623 56 40 F. 073 623 56 39 www.youngguns.nl KvK 18076568 YoungGuns Kasteleinenkampweg 7b 5222 AX 's-Hertogenbosch T. 073 623 56 40 F. 073 623 56 39 www.youngguns.nl KvK 18076568

1 2

[Dovecot] \Noselect on virtual folders
by Matthias Rieber 17 Jun '10

17 Jun '10

Hi, I've some virtual folders which seem a bit odd when they are listed. a LIST "virtual.spam." "*" * LIST (\Noselect \HasNoChildren) "." "virtual.spam." * LIST (\HasNoChildren) "." "virtual.spam.unchecked" * LIST (\Noselect \HasChildren) "." "virtual.spam.disagree" * LIST (\HasNoChildren) "." "virtual.spam.disagree.dspam" * LIST (\HasNoChildren) "." "virtual.spam.disagree.spamassassin" a OK List completed. This seems ok, virtual.spam and virtual.spam.disagree can't contain mails. I'm wondering if virtual.spam should have the flag \HasChildren instead if \HasNoChildren, but this doesn't cause trouble... a LIST (SUBSCRIBED) "virtual.spam." "*" * LIST (\Subscribed \Noselect) "." "virtual.spam.disagree.spamassassin" * LIST (\Subscribed \Noselect) "." "virtual.spam.disagree.dspam" * LIST (\Subscribed \Noselect) "." "virtual.spam.unchecked" a OK List completed. When I list the folder with (SUBSCRIBED), the virtual folders are all flagged with \Noselect. This appears at all virtual folders. All other folders don't have the \Noselect flag. On the Nokia N900 I can't enter all virtual folders. The log shows that the n900 always list the folders with (SUBSCRIBED). Is this listing the expected behaviour? regards, Matthias

2 1

[Dovecot] Shared mailboxes errors
by Nikita Koshikov 17 Jun '10

17 Jun '10

Hello list, I'm implementing shared mailboxes on live system and after enabling acl plugin I got errors in my log: Jun 17 15:50:33 dict: Error: sql dict iterate: Invalid/unmapped path: shared/shared-boxes/anyone/ I have no clue why this happening, users don't know about new functionality they just use imap as before. Also dict database begin to fill up by records like: select * from user_shares; user@domain.com|admin@domain.com|1 But user don't use setacl command. Searching for the list gave http://www.dovecot.org/list/dovecot/2009-April/038664.html , but question seemed still open. So, can someone give point how to fix\avoid this ? One more question, on live system it's hard to debug dovecot with mail_debug=yes for all users, can this option be turn on for individual user? or maybe mail_debug stream can be redirected also for individual user ? dovecot -n # 1.2.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-gentoo-r4 i686 Gentoo Base System release 1.12.13 log_path: /var/log/dovecot/dovecot-error.log info_log_path: /var/log/dovecot/dovecot.log protocols: imaps pop3s managesieve ssl_cert_file: /etc/ssl/dovecot/imaps.crt ssl_key_file: /etc/ssl/dovecot/imaps.key login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_executable(managesieve): /usr/libexec/dovecot/managesieve-login login_greeting: Server ready. login_processes_count(default): 50 login_processes_count(imap): 50 login_processes_count(pop3): 5 login_processes_count(managesieve): 5 login_max_processes_count: 2048 max_mail_processes: 2048 mail_max_userip_connections(default): 25 mail_max_userip_connections(imap): 25 mail_max_userip_connections(pop3): 10 mail_max_userip_connections(managesieve): 10 first_valid_uid: 8 last_valid_uid: 8 first_valid_gid: 12 last_valid_gid: 12 mail_drop_priv_before_exec: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_executable(managesieve): /usr/libexec/dovecot/managesieve mail_plugins(default): quota imap_quota trash expire zlib autocreate virtual antispam acl imap_acl mail_plugins(imap): quota imap_quota trash expire zlib autocreate virtual antispam acl imap_acl mail_plugins(pop3): quota virtual mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/managesieve imap_client_workarounds(default): delay-newmail imap_client_workarounds(imap): delay-newmail imap_client_workarounds(pop3): imap_client_workarounds(managesieve): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): namespace: type: private separator: / location: maildir:~/data inbox: yes list: yes subscriptions: yes namespace: type: private separator: / prefix: Company/ location: virtual:/var/mail/virtual:INDEX=MEMORY:LAYOUT=maildir++ hidden: yes list: yes namespace: type: shared separator: / prefix: shared/%%u/ location: maildir:%%h/data:INDEX=%h/shared/%%u list: children lda: postmaster_address: postmaster(a)domain.com hostname: mail.domain.com mail_plugins: quota trash expire sieve virtual acl quota_full_tempfail: yes sendmail_path: /usr/sbin/sendmail auth_socket_path: /var/run/dovecot/auth-master log_path: /var/log/dovecot/dovecot-deliver.log info_log_path: /var/log/dovecot/dovecot-deliver.log auth default: mechanisms: plain login default_realm: domain.com cache_size: 10240 cache_negative_ttl: 0 user: dovecot_auth username_format: %Lu master_user_separator: * worker_max_count: 50 passdb: driver: passwd-file args: /etc/dovecot/passdb/master.pwd master: yes passdb: driver: passwd-file args: /etc/dovecot/passdb/users.pwd passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: prefetch userdb: driver: passwd-file args: /etc/dovecot/passdb/users.pwd userdb: driver: ldap args: /etc/dovecot/dovecot-userdb-ldap.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 user: mail group: dovecot_auth master: path: /var/run/dovecot/auth-master mode: 384 user: mail group: mail plugin: quota_warning: storage=90%% /etc/dovecot/plugins/quota_warning.sh 90 quota: maildir:Mailbox quota quota_rule: *:storage=500M quota_rule2: Trash:storage=10%% acl: vfile:/etc/dovecot/acl:cache_secs=3600 acl_shared_dict: proxy::acl trash: /etc/dovecot/plugins/dovecot-trash.conf expire: Trash 30 Spam 30 expire_dict: proxy::expire autocreate: Drafts autocreate2: Sent autocreate3: Spam autocreate4: Trash autosubscribe: Drafts autosubscribe2: Sent autosubscribe3: Spam autosubscribe4: Trash sieve: ~/.dovecot.sieve sieve_dir: ~/sieve sieve_after: /etc/dovecot/sieve/default-after.sieve sieve_extensions: +notify +spamtest sieve_spamtest_status_type: score sieve_spamtest_status_header: X-Spam-Scan-Score sieve_spamtest_max_value: 10 antispam_trash: Trash antispam_spam: Spam antispam_allow_append_to_spam: no antispam_mail_sendmail: /usr/bin/sa-learn antispam_mail_sendmail_args: -u mail antispam_mail_spam: --spam antispam_mail_notspam: --ham antispam_mail_tmpdir: /tmp dict: expire: sqlite:/etc/dovecot/plugins/expire.conf acl: sqlite:/etc/dovecot/plugins/acl.conf #cat /etc/dovecot/plugins/acl.conf connect = /var/mail/acl.db map { pattern = shared/shared-boxes/user/$to/$from table = user_shares value_field = dummy fields { from_user = $from to_user = $to } } #cat /etc/dovecot/acl/.DEFAULT user=admin(a)domain.com lrwstiekxa

2 2

[Dovecot] IMAP Address book ?
by Frank Bonnet 17 Jun '10

17 Jun '10

Hello Does anyone knows if it is possible to manage a personnal address book with Dovecot and IMAP ? I mean would it be possible to store it in the IMAP user's space and not in the MUA address book in order to always retrieve it even changing on machine / MUA ? Thanks

4 6

[Dovecot] basic conf error? v1.2.11
by Justin Krejci 17 Jun '10

17 Jun '10

I just downloaded 1.2.11 and compiled from source including mysql support and using default directory locations. I walked thru the included example conf file and tweaked it out and get an invalid configuration file. I trimmed out all of the commented sections to make the non-default config super easy to navigate during troubleshooting. Remaining config which gives an error of "unknown setting: mechanisms" so I switched it to auth_mechanisms and then get the following when starting dovecot: Error: Error in configuration file /usr/local/etc/dovecot.conf line 18: Unknown section type (section changed in /usr/local/etc/dovecot.conf at line 14) Fatal: Invalid configuration in /usr/local/etc/dovecot.conf ##################### protocols = imap pop3 listen = <SCRUBBED IP> disable_plaintext_auth = no ssl = no login_processes_count = 100 login_max_processes_count = 500 login_max_connections = 512 login_greeting = DovecotProxy08 ready. protocol imap { } protocol pop3 { } protocol lda { } #LINE 14 auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@/$!&\ auth default { mechanisms = plain passdb sql { #LINE 18 args = /usr/local/etc/dovecot-sql.conf } userdb sql { args = /usr/local/etc/dovecot-sql.conf } user = root } dict { } plugin { } ##################### Any ideas what is wrong here? It seems like the example conf file is not correct. Yes the dovecot-sql.conf file exists.

2 2

[Dovecot] ZFS Index corruption and Connection reset by peer
by Philippe Chevalier 17 Jun '10

17 Jun '10

Hello, I'm currently using dovecot 1.2.11 on FreeBSD 8.0 with ZFS filesystems. So far, so good, it works quite nicely, but I have a couple glitches. Each user has his own zfs partition, mounted on /home/<user> (easier to set per user quotas) and mail is stored in their home. From day one, when people check their mail via imap, a lot of indexes corruption occured : dovecot: IMAP(<user>@domain.org): Corrupted transaction log file /home/<user>/Mail/Maildir/INBOX/dovecot.index.log seq 13: record size too small +(type=0x0, offset=5560, size=0) (sync_offset=5652) dovecot: IMAP(<user>@domain.org): fscking index file /home/<user>/Mail/Maildir/INBOX/dovecot.index dovecot: IMAP(<user>@domain.org): /home/<user>/Mail/Maildir/INBOX/dovecot.index log position went backwards (13,132 < 13,5560) dovecot: IMAP(<user>@domain.org): Transaction log file /home/<user>/Mail/Maildir/INBOX/dovecot.index.log: marked corrupted etc, etc... After some digging, I "solved" this problem with mmap_disable = yes in dovecot.conf. Index corruption doesn't seem to occur anymore. Is this normal? I thought this problem occured only on NFS filesystem and eventually on old versions of ZFS. Hasn't this been fixed? Is there an option in ZFS that would allow mmap calls without corruption. Has it something to do with compression ? The options of the zfs filesystem are : zhome/username type filesystem - zhome/username creation Thu Mar 18 11:10 2010 - zhome/username used 750M - zhome/username available 61.0G - zhome/username referenced 750M - zhome/username compressratio 1.20x - zhome/username mounted yes - zhome/username quota none default zhome/username reservation none default zhome/username recordsize 128K default zhome/username mountpoint /usr/home/username inherited from zhome zhome/username sharenfs off default zhome/username checksum on default zhome/username compression lzjb inherited from zhome zhome/username atime off inherited from zhome zhome/username devices on default zhome/username exec on default zhome/username setuid on default zhome/username readonly off default zhome/username jailed off default zhome/username snapdir hidden default zhome/username aclmode groupmask default zhome/username aclinherit restricted default zhome/username canmount on default zhome/username shareiscsi off default zhome/username xattr off temporary zhome/username copies 1 default zhome/username version 3 - zhome/username utf8only off - zhome/username normalization none - zhome/username casesensitivity sensitive - zhome/username vscan off default zhome/username nbmand off default zhome/username sharesmb off default zhome/username refquota none default zhome/username refreservation none default zhome/username primarycache all default zhome/username secondarycache all default zhome/username usedbysnapshots 0 - zhome/username usedbydataset 750M - zhome/username usedbychildren 0 - zhome/username usedbyrefreservation 0 - Other problem, that I have been unable to solve so far, is that a lot of entries show up in my logs about : dovecot: imap-login: net_disconnect() failed: Connection reset by peer It doesn't seem to have any adverse effect, except it's filling up the logs. It seem to appear when a client closes the imap connection? Is there a way to suppress this error? Regard P.C.

5 5

[Dovecot] Dovecot SASL
by Tseveendorj Ochirlantuu 17 Jun '10

17 Jun '10

Dear All, I've installed Postfix 2.7.0 and Dovecot 1.2.9 on Ubuntu 10.04. I want to use Dovecot SASL with Postfix and did the following configuration. main.cf smtpd_sasl_auth_enable = yes smtpd_sasl_type = dovecot smtpd_sasl_path = private/dovecot-auth smtpd_sasl_authenticated_header = yes smtpd_sasl_security_options = noanonymous smtpd_sasl_local_domain = $myhostname broken_sasl_auth_clients = yes smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination /etc/dovecot/auth.d/01-dovecot-postfix.auth mechanisms = plain login socket listen { client { path = /var/spool/postfix/private/dovecot-auth mode = 0660 user = postfix group = postfix } } I did not see AUTH in the telnet connection. EHLO mail.domain.mn 250-ns1.domain.mn 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN How to solvet this ? Best regards, Tseveen

2 5

[Dovecot] BUG Dovecot 1.0.15 and Apples Mail.app
by Gerhard Waldemair 17 Jun '10

17 Jun '10

Is there anyone using Apple´s Mail.app to collect the mails via IMAP or IMAPS ? I found a funny bug in Debian Lennys Dovecot Version. (still v. 1.0.15) When I get my Mails via IMAP or IMAPS and define a Rule in Mail.app to move the eMail to s specific folder I will find the mail 2 times in the folder. After a minute or so the double Mail disappears. I have tried it with other programs like Thunderbird. There everything works, v1.0 too. Now I have updatet Dovecot from 1.0 to 1.2 from Backports and everything works great now !!!!! Regards, Gerhard PS in Squeeze Dovecot is Version 1.2

2 1

[Dovecot] dovecot vs. Thunderbird
by Bodo Schulz 17 Jun '10

17 Jun '10

Hello (and Moin Moin) ;) I have currently a straith Problem ... I have our IMAP-Server migrated from an old cyrus the the current stable Version of dovecot. In the old configuration we organized many mails (e.g. root-Stuff) in Public Folders. They structure had nearly 5 folderlevels. After the complete migration an syncronize we switch complete to the dovecot setup. At this moment we have problems with access to the Public Folders. (We use as Client the actualy Thunderbird3 ...) When i want subscribe Folders, i have no access to folder are deeper as second level! Now, i have testet with rawlogs an switch on the debugging in Thunderbird, but a have no more idea! :-( Here an extract of our Public Folders: ,------------------------------------- Shared Folders +- shared +- backup | +- archive | +- warnings +- databases +- WARNINGS +- ERRORS +- archive +- projects +- ... +- ... +- archive `------------------------------------- I can see max. the Folders 'Shared Folders.shared.backup', not they subfolders! :( Now the techs: ,------------------------------------- dovecot --version 1.2.11 dovecot -n # 1.2.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-686 i686 Debian 5.0.4 ext3 log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot.info.log log_timestamp: %Y-%m-%d %H:%M:%S | protocols: imap managesieve lda listen(default): * listen(imap): * listen(managesieve): *:2000 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login login_greeting: S2B Dovecot ready. login_log_format_elements: user=<%n> method=%m rip=%r lip=%l %c max_mail_processes: 64 verbose_proctitle: yes first_valid_gid: 100 mail_privileged_group: vmail mail_uid: 1101 mail_gid: 1101 mail_location: maildir:/home/vmail/%n/:CONTROL=/home/vmail/%n/control:INDEX=/home/vmail/%n/indexes mailbox_idle_check_interval: 120 mail_debug: yes maildir_stat_dirs: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/rawlog /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/rawlog /usr/lib/dovecot/imap mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): autocreate mail_plugins(imap): autocreate mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve mail_log_prefix: %Us(%n): namespace: type: private separator: . location: maildir:/home/vmail/%n/:CONTROL=/home/vmail/%n/control:INDEX=/home/vmail/%n/indexes:LAYOUT=maildir++ inbox: yes list: yes subscriptions: yes namespace: type: public separator: . prefix: Shared Folders. location: maildir:/home/vmail/folder-shared:CONTROL=/home/vmail/%n/shared.control/:INDEX=/home/vmail/%n/shared.indexes/:LAYOUT=maildir++ list: yes lda: postmaster_address: postmaster@.....de mail_plugins: sieve auth_socket_path: /var/run/dovecot/auth-master deliver_log_format: msgid=%m: %$ log_path: /var/log/dovecot/dovecot-deliver.log info_log_path: /var/log/dovecot/dovecot-deliver.log mail_debug: yes auth default: mechanisms: plain login cache_size: 2048 username_format: %Ln worker_max_count: 25 passdb: driver: pam args: session=yes cache_key=%u dovecot passdb: driver: passwd-file args: /etc/dovecot/dovecot-pwd.conf userdb: driver: static args: uid=1101 gid=1101 home=/home/vmail/%Lu socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: autocreate: Trash autocreate2: Spam autosubscribe: Trash autosubscribe2: Spam mail_log_events: delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields: uid box msgid size convert_skip_broken_mailboxes: no convert_skip_dotdirs: no sieve: /home/SIEVE-SCRIPTE/%Ln.sieve mail_debug: yes `------------------------------------- Can you please help me? Bodo PS: sorry about my english :}

7 13

[Dovecot] Ok with a bit more wiki reading ...
by Chuck McManis 17 Jun '10

17 Jun '10

So if I want to run dovecot from tcpserver it seems like I can simply run `pop3-login --ssl` from tcpserver (its sort of like running it from inetd) and it says it will 'talk to dovecot'. Can I disable all listeners in dovecot then? Will is still talk to it? Trying some experiments now ... --Chuck

1 0

[Dovecot] Migrating from CommunigatePro to Dovecot - anyone done this?
by Gavin Lawrie 17 Jun '10

17 Jun '10

Apologies if this is in the archive - did look but couldn't find it. Does anyone have any experience of migrating from CommunigatePro to Dovecot? We currently run CGP 5.3.4, supporting a small system (20 or so users, one domain). We've been using it for years, and have a mixed bag of MailDir and mbox folders accessed via IMAP clients. Some users have large mail accounts (15GB total). We're looking to move as CGP is evolving into a complex "Messaging Centre" application (PBX, SIP, Mail, Groupware, Portals etc.) which we don't need / use. I had a look on the Dovecot Wiki and under migration are discussions about various other mail systems, but I don't know enough about these to tell if they would also apply to CGP. Any thoughts / suggestions would be welcomed. Thanks Gavin. * Balanced Scorecard Training from 2GC: Next course 16th July 2010 in the UK. More information from http://www.2gc.co.uk/balanced-scorecard-training-dates ----------------------------- 2GC Limited is a limited company registered in England and Wales. Address: Albany House, Market Street, Maidenhead, Berkshire, SL6 8BE. Contact: +44 (0) 1628 421506 // info(a)2gc.co.uk Registered number: 3754183. Registered office:16, Wentworth Road, Oxford OX2 7TQ. http://www.2gc.co.uk/

4 4

[Dovecot] Patch to fix leak in imap_refresh_proctitle in beta[5, 6]
by Mike Abbott 17 Jun '10

17 Jun '10

The "imap" process of dovecot-2.0.beta[5,6] grows very large (I impose no system limits), e.g. exceeding 4.8GB on a 64-bit system. These messages appear in the logs: Warning: Growing pool 'imap client' with: 2048 Warning: Growing pool 'Cache fields' with: 2048 Warning: Growing data stack with: 32768 Warning: Growing data stack with: 65536 Warning: Growing data stack with: 131072 [...] Warning: Growing data stack with: 1073741824 Warning: Growing data stack with: 2147483648 Warning: Growing data stack with: 4294967296 Every time the data stack grows, the backtrace ends with either: 2 libdovecot.0.dylib 0x00000001059a35c3 pool_data_stack_realloc + 72 -> 3 libdovecot.0.dylib 0x0000000105994d59 buffer_alloc + 59 -> 4 libdovecot.0.dylib 0x0000000105994ef9 buffer_check_limits + 127 -> 5 libdovecot.0.dylib 0x00000001059950e8 buffer_append + 38 -> 6 imap 0x0000000105867333 imap_refresh_proctitle + 218 -> 7 imap 0x000000010585f18e client_command_input + 190 -> [...] or 2 libdovecot.0.dylib 0x00000001059a35c3 pool_data_stack_realloc + 72 -> 3 libdovecot.0.dylib 0x0000000105994d59 buffer_alloc + 59 -> 4 libdovecot.0.dylib 0x0000000105994ef9 buffer_check_limits + 127 -> 5 libdovecot.0.dylib 0x00000001059950e8 buffer_append + 38 -> 6 imap 0x0000000105867333 imap_refresh_proctitle + 218 -> 7 imap 0x00000001058666ce cmd_sync_continue + 199 -> [...] Here is a patch to fix it: --- a/src/imap/main.c (beta6) +++ b/src/imap/main.c (working copy) @@ -39,11 +39,12 @@ #define IMAP_PROCTITLE_PREFERRED_LEN 80 struct client *client; struct client_command_context *cmd; - string_t *title = t_str_new(128); + string_t *title; if (!verbose_proctitle) return; + title = str_new(default_pool, 128); str_append_c(title, '['); switch (imap_client_count) { case 0: @@ -72,6 +73,7 @@ } str_append_c(title, ']'); process_title_set(str_c(title)); + str_free(&title); } static void client_kill_idle(struct client *client) And perhaps there should be a warning when data is allocated out of the primordial data stack (as opposed to a nested one)?

2 5

[Dovecot] search bug?
by Pozsar Balazs 16 Jun '10

16 Jun '10

Hi all, I have emails with multiple Delivered-To: headers in them. The problem is that the SEARCH command only searches in the first instances. For example: 1 FETCH 14557 BODY[HEADER.FIELDS (Delivered-To)] * 14557 FETCH (BODY[HEADER.FIELDS (DELIVERED-TO)] {85} Delivered-To: pozsy(a)ojjektum.uhulinux.hu Delivered-To: szamlagyar(a)uhusystems.com ) 1 OK Fetch completed. 1 SEARCH HEADER Delivered-To szamlagyar(a)uhusystems.com * SEARCH 14589 1 OK Search completed (0.146 secs). You can see the meesage with the id 14557 _has_ a "Delivered-To: szamlagyar(a)uhusystems.com" header field, but the SEARCH does not find it, only another message. This is with dovecot 1.2.11. For the record, cyrus-imapd behaves as I would have expected, and I could not find anything relevant in the RFCs. Could anyone tell me if this is a bug, or how to search like I would want? Thanks, Balazs Pozsar

3 6

[Dovecot] New admin, not much success
by Chuck McManis 16 Jun '10

16 Jun '10

Hello, I'm trying to set up something fairly simple (famous last words) using Dovecot. I have a very small setup (just a dozen users) I'm using qmail as my MTA. I'm running FreeBSD 8.0 I've got qmail delivering into a file named 'Mailbox' in user's home directories. I prefer not to use Maildir delivery because from a shell its a PITA to get a Maildir aware MUA (I use /bin/mail when I'm attached locally) What I'm trying to do is configure an SSL only POP3 server so that folks can retrieve their email on the road without divulging their passwords. My backup scenario is to put VPN software on my user's clients and having them VPN into the network and then do un-encrypted POP3 from the VPN. I prefer not to do this as it means maintaining the VPN client as well. Users have a mix of MacOS, Windows, and Linux. So, I can't get dovecot to work at all. In an unusual turn about I got the SSL stuff working but not the mailbox handling. I'm running 2.0beta6 Output from dovecot -n ------------------------------------------------------------------------------------ # 2.0.beta6: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.0-RELEASE-p2 i386 nfs auth_debug = yes auth_verbose = yes default_internal_user = nobody default_login_user = nobody listen = * mail_full_filesystem_access = yes mail_location = mbox:/home/%u/:INBOX=/home/%u/ passdb { driver = pam } protocols = pop3 service pop3-login { inet_listener pop3s { port = 995 ssl = yes } } service pop3 { process_limit = 1024 } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } ----------------------------------------------------------------------- A typical failure looks like this in maillog: Jun 15 22:19:20 eeebox dovecot: master: Dovecot v2.0.beta6 starting up Jun 15 22:20:29 eeebox dovecot: pop3-login: Login: user=<cmcmanis>, method=PLAIN, rip=66.125.189.27, lip=66.125.189.30, mpid=78871, TLS Jun 15 22:20:29 eeebox dovecot: pop3(cmcmanis): Error: Opening INBOX failed: Mailbox isn't selectable Jun 15 22:20:29 eeebox dovecot: pop3(cmcmanis): Error: Couldn't open INBOX: Mailbox isn't selectable Jun 15 22:20:29 eeebox dovecot: pop3(cmcmanis): Couldn't open INBOX top=0/0, retr=0/0, del=0/0, size=0 -------------------------------------------------------------- Home directories are mounted via NFS and root doesn't have access, but if dovecot accesses the Mailbox as the user it should work fine. I'm about ready to start hacking in additional logging into mail-storage.c to figure out what "mailbox isn't selectable" means. --Chuck

4 12

[Dovecot] Logout after SSL/TLS negociation
by bmfr 16 Jun '10

16 Jun '10

Hi All, I've set up Dovecot to use my signed SSL certificate and IMAP client is using STARTTLS on port 143 without secure authentication. The TLS negociation process seems to go through ok but once the negociation is finished the client sends an IMAP LOGOUT message; he does not try to authenticate, below is the Dovecot's info log: dovecot: 2010-06-15 15:37:01 Info: auth(default): new auth connection: pid=3932 dovecot: 2010-06-15 15:37:03 Info: imap-login: Aborted login (0 authentication attempts): rip=130.100.32.54, lip=10.0.3.3, TLS I've decrypted the TLS negociation thanks to Wireshark (in SSL preferences I added the certificate's private key to decode the stream between client and server) but unfortunately it does not say why the client is sending the LOGOUT command. Do you have an idea of what could be wrong in my server set up? What debugging process would you advise me to follow? Thanks a lot for your precious help. Bastien -- View this message in context: http://old.nabble.com/Logout-after-SSL-TLS-negociation-tp28900688p28900688.… Sent from the Dovecot mailing list archive at Nabble.com.

3 4

[Dovecot] Mail Stuck in cur file
by jason hirsh 16 Jun '10

16 Jun '10

I am running dovecot 1.1.7 with postfix 2.6.5. Ihad a server down issue and when it rebooted the IPFW firewalll on my FReebsd server prevented mail from being delivered..at least thatis what I think the issue was... when i stopped IPFW .. mail resumed anyway I use vmail structure..and there are message in the cur directory.. how do i get them "reprocessed" or "released" I presume this are incoming

3 5

[Dovecot] A new director service in v2.0 for NFS installations
by Timo Sirainen 16 Jun '10

16 Jun '10

As http://wiki.dovecot.org/NFS describes, the main problem with NFS has always been caching problems. One NFS client changes two files, but another NFS client sees only one of the changes, which Dovecot then assumes is caused by corruption. The recommended solution has always been to redirect the same user to only a single server at the same time. User doesn't have to be permanently assigned there, but as long as a server has some of user's files cached, it should be the only server accessing the user's mailbox. Recently I was thinking about a way to make this possible with an SQL database: http://dovecot.org/list/dovecot/2010-January/046112.html The company here in Italy didn't really like such idea, so I thought about making it more transparent and simpler to manage. The result is a new "director" service, which does basically the same thing, except without SQL database. The idea is that your load balancer can redirect connections to one or more Dovecot proxies, which internally then figure out where the user should go. So the proxies act kind of like a secondary load balancer layer. When a connection from a newly seen user arrives, it gets assigned to a mail server according to a function: host = vhosts[ md5(username) mod vhosts_count ] This way all of the proxies assign the same user to the same host without having to talk to each others. The vhosts[] is basically an array of hosts, except each host is initially listed there 100 times (vhost count=100). This vhost count can then be increased or decreased as necessary to change the host's load, probably automatically in future. The problem is then of course that if (v)hosts are added or removed, the above function will return a different host than was previously used for the same user. That's why there is also an in-memory database that keeps track of username -> (hostname, timestamp) mappings. Every new connection from user refreshes the timestamp. Also existing connections refresh the timestamp every n minutes. Once all connections are gone, the timestamp expires and the user is removed from database. The final problem then is how multiple proxies synchronize their state. The proxies connect to each others forming a connection ring. For example with 4 proxies the connections would go like A -> B -> C -> A. Each time a user is added/refreshed, a notification is sent to both directions in the ring (e.g. B sends to A and C), which in turn forward it until it reaches a server that has already seen it. This way if a proxy dies (or just hangs for a few seconds), the other proxies still get the changes without waiting for it to timeout. Host changes are replicated in the same way. It's possible that two connections from a user arrive to different proxies while (v)hosts are being added/removed. It's also possible that only one of the proxies has seen the host change. So the proxies could redirect users to different servers during that time. This can be prevented by doing a ring-wide sync, during which all proxies delay assigning hostnames to new users. This delay shouldn't be too bad because a) they should happen rarely, b) it should be over quickly, c) users already in database can still be redirected during the sync. The main complexity here comes from how to handle proxy server failures in different situations. Those are less interesting to describe and I haven't yet implemented all of it, so let's just assume that in future it all works perfectly. :) I was also thinking about writing a test program to simulate the director failures to make sure it all works. Finally, there are the doveadm commands that can be used to: 1) List the director status: # doveadm director status mail server ip vhosts users 11.22.3.44 100 1312 12.33.4.55 50 1424 1) Add a new mail server (defaults are in dovecot.conf): # doveadm director add 1.2.3.4 2) Change a mail server's vhost count to alter its connection count (also works during adding): # doveadm director add 1.2.3.4 50 3) Remove a mail server completely (because it's down): # doveadm director remove 1.2.3.4 If you want to slowly get users away from a specific server, you can assign its vhost count to 0 and wait for its user count to drop to zero. If the server is still working while "doveadm director remove" is called, new connections from the users in that server are going to other servers while the old ones are still being handled.

6 22

[Dovecot] list command and shared folders
by Wolfram Greinert 16 Jun '10

16 Jun '10

Hello, I try to setup shared folders with real unix users: user "test2": setacl t2_t4 test4 lrswi user "test3": setacl t3_t4 test4 lrswi Now I see entries in ~test2/Maildir/.t2_t4/dovecot-acl, ~test3/Maildir/.t3_t4/dovecot-acl and /var/lib/dovecot/acl_dict.db (see below) But "test4" don't see the shared folders in the list command :-( ---- 01 login test4 xxxxxxx 01 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS ACL RIGHTS=texk QUOTA] Logged in 02 namespace * NAMESPACE (("" "/")) (("shared/" "/")) NIL 02 OK Namespace completed. 03 list "" * * LIST (\HasNoChildren) "/" "INBOX" 03 OK List completed. ---- The select command is possible: ---- 04 select shared/test2/t2_t4 * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 4 EXISTS * 4 RECENT * OK [UNSEEN 1] First unseen. * OK [UIDVALIDITY 1276509851] UIDs valid * OK [UIDNEXT 5] Predicted next UID * OK [HIGHESTMODSEQ 1] Highest 04 OK [READ-WRITE] Select completed. ---- What is wrong in this setup, why can't see "test4" the shared folders in the list command ??? Best regards Wolfram dovecot -n: ----------- # 1.2.11: /etc/dovecot.conf # OS: Linux 2.6.32.12-0.7-default x86_64 SUSE Linux Enterprise Server 11 (x86_64) base_dir: /var/run/dovecot/ syslog_facility: local5 protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/private/server.cert ssl_key_file: /etc/ssl/private/server.cert ssl_cipher_list: ALL:!LOW login_dir: /var/run/dovecot/login login_executable(default): /opt/dovecot/libexec/dovecot/imap-login login_executable(imap): /opt/dovecot/libexec/dovecot/imap-login login_executable(pop3): /opt/dovecot/libexec/dovecot/pop3-login login_log_format_elements: user=%u rip=%r method=%m %c login_processes_count: 10 login_max_processes_count: 2048 max_mail_processes: 4096 mail_max_userip_connections(default): 15 mail_max_userip_connections(imap): 15 mail_max_userip_connections(pop3): 10 verbose_proctitle: yes first_valid_uid: 290 last_valid_uid: 39000 first_valid_gid: 100 last_valid_gid: 1000 mail_debug: yes mbox_lock_timeout: 30 mail_executable(default): /opt/dovecot/libexec/dovecot/imap mail_executable(imap): /opt/dovecot/libexec/dovecot/imap mail_executable(pop3): /opt/dovecot/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota acl imap_acl mail_plugins(imap): quota imap_quota acl imap_acl mail_plugins(pop3): quota mail_plugin_dir(default): /opt/dovecot/lib/dovecot/imap mail_plugin_dir(imap): /opt/dovecot/lib/dovecot/imap mail_plugin_dir(pop3): /opt/dovecot/lib/dovecot/pop3 mail_log_prefix: %Us[%p]: user=%u, rip=%r: imap_client_workarounds(default): delay-newmail imap_client_workarounds(imap): delay-newmail imap_client_workarounds(pop3): pop3_reuse_xuidl(default): no pop3_reuse_xuidl(imap): no pop3_reuse_xuidl(pop3): yes pop3_save_uidl(default): no pop3_save_uidl(imap): no pop3_save_uidl(pop3): yes pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): oe-ns-eoh namespace: type: private separator: / location: maildir:~/Maildir:INDEX=/var/dovecot/%1u/%u/indexes:CONTROL=/var/dovecot/%1u/%u/control inbox: yes list: yes subscriptions: yes namespace: type: shared separator: / prefix: shared/%%u/ location: maildir:/home1/users/%%u/Maildir:INDEX=/var/dovecot/%1u/%u/shared/%%u/indexes:CONTROL=/var/dovecot/%1u/%u/shared/%%u/control list: children lda: mail_plugins: quota mail_plugin_dir: /opt/dovecot/lib/dovecot/lda sendmail_path: /usr/sbin/sendmail auth_socket_path: /var/run/dovecot/auth-master auth default: mechanisms: plain login cache_negative_ttl: 600 executable: /opt/dovecot/libexec/dovecot/dovecot-auth username_format: %Lu count: 10 worker_max_count: 1024 passdb: driver: passwd-file args: /etc/dovecot.deny deny: yes passdb: driver: pam args: max_requests=100 dovecot userdb: driver: passwd plugin: quota: fs acl: vfile: acl_shared_dict: proxy::acl_dict dict: acl_dict: db:/var/lib/dovecot/acl_dict.db ~test2/Maildir/.t2_t4/dovecot-acl: ---------------------------------- user=test4 ilrws ~test3/Maildir/.t3_t4/dovecot-acl: ---------------------------------- user=test4 ilrws db_dump -p /var/lib/dovecot/acl_dict.db: ---------------------------------------- VERSION=3 format=print type=btree db_pagesize=4096 HEADER=END shared/shared-boxes/user/test4/test2 1 shared/shared-boxes/user/test4/test3 1 DATA=END -- ########################################### # Wolfram Greinert # # URZ der Uni Leipzig, Abteilung Netze # # 04109 Leipzig, Neumarkt 9-19 # # Tel.: +(0341) 97-33325 # # email: greinert(a)rz.uni-leipzig.de # ###########################################

2 4

[Dovecot] Sieve doesn't appear to be active
by Darek M 16 Jun '10

16 Jun '10

I'm hoping that this isn't something stupid and that I'm not wasting bandwidth here, but I'm stuck and don't know any further ways of debugging this. And most non-documentation, end-user created info I find is for 1.0 with cmusieve. Running Dovecot 1.2.11 on Fedora Core 12. Added 'sieve' to 'mail_plugins'. Have enabled verbose logging with 'mail_debug = yes'. But I'm not seeing anything in the logs relating to sieve, and the sieve script I point to isn't being compiled (no .log file). Everything else works fine, this is a production system where I'm trying to add sieve support. What steps can I take to troubleshoot? Config files: # dovecot -n ========= # 1.2.11: /etc/dovecot.conf # OS: Linux 2.6.31.6-166.fc12.i686.PAE i686 Fedora release 12 (Constantine) ext3 log_path: /var/log/dovecot/dovecot-err.log info_log_path: /var/log/dovecot/dovecot-info.log protocols: imap imaps pop3 pop3s managesieve ssl_cert_file: /etc/postfix/ssl/dovecot/certs/dovecot.pem ssl_key_file: /etc/postfix/ssl/dovecot/private/dovecot.pem disable_plaintext_auth: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_executable(managesieve): /usr/libexec/dovecot/managesieve-login login_process_per_connection: no login_processes_count: 10 first_valid_gid: 5000 last_valid_gid: 5000 mail_uid: 5000 mail_gid: 5000 mail_location: maildir:/home/vmail/%d/%n/Maildir mail_debug: yes maildir_very_dirty_syncs: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_executable(managesieve): /usr/libexec/dovecot/managesieve mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/managesieve lda: postmaster_address: postmaster(a)domain.com hostname: domain.com mail_plugins: sieve quota auth default: mechanisms: plain login apop user: nobody passdb: driver: sql args: /etc/postfix/dovecot.sql socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: vmail master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: sieve: /home/vmail/sieve-scripts/sieve.siv /etc/postfix/dovecot.sql: ================= driver = mysql connect = host=/var/lib/mysql/mysql.sock dbname=postfix user=dovecot password=dovecot user_query = SELECT concat('/home/vmail/', maildir) as home, concat('maildir:/home/vmail/', maildir) as mail, 5000 AS uid, 5000 AS gid, concat('maildir:storage=', quota) AS quota FROM mailbox WHERE username = '%u' AND active = '1' password_query = SELECT username as user, password, concat('/home/vmail/', maildir) as userdb_home, concat('maildir:/home/vmail/', maildir) as userdb_mail, 5000 as userdb_uid, 5000 as userdb_gid FROM mailbox WHERE username = '%u' AND active = '1' ================= [root@sys ~]# cd /var/log/dovecot/ [root@sys dovecot]# grep -i sieve * dovecot-info.log:Jun 14 13:09:22 managesieve-login: Info: Disconnected (no auth attempts): rip=::1, lip=::1, secured Only log entry from me telnetting to the managesieve port. -- Darek

2 2

[Dovecot] Dovecot passdb LDAP queries
by Wilberth Pérez 15 Jun '10

15 Jun '10

Hi: When runs dovecot, I can see that dovecot sends two ldap queries to my OpenLDAP server and establishes one conection, however when test my dovecot-ldap configurarion with telnet My OpenLDAP server don't received ldap request from my clients. dovecot-auth process need special permissions?. my dovecot-ldap.conf file is wrong?. Any suggestion ? Thanks. My Telnet messages are: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN AUTH=LOGIN] Dovecot ready. 1 login USER PASSWORD 1 NO [AUTHENTICATIONFAILED] Authentication failed. My Dovecot logs are: Jun 15 13:27:42 auth(default): Info: shadow(USER,X.X.X.X): lookup Jun 15 13:27:42 auth(default): Info: shadow(USER,X.X.X.X): unknown user Jun 15 13:27:42 auth(default): Info: ldap(USER,X.X.X.X): invalid credentials (given password: PASSWORD) Jun 15 13:27:44 auth(default): Info: client out: FAIL 1 user=USER My dovecot.conf configuration: log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot.log protocols: imap pop3 listen(default): X.X.X.X:143 listen(imap): X.X.X.X:143 listen(pop3): X.X.X.X:110 ssl: no disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login first_valid_uid: 100 mail_location: maildir:%h/Maildir/:INDEX=/var/indexes/%u/:CONTROL=/var/control/%u/:INBOX=/var/mail/%u/ mail_debug: yes mail_full_filesystem_access: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota trash mail_plugins(imap): quota imap_quota trash mail_plugins(pop3): quota mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 pop3_reuse_xuidl(default): no pop3_reuse_xuidl(imap): no pop3_reuse_xuidl(pop3): yes lda: mail_plugins: cmusieve quota auth default: mechanisms: plain login verbose: yes debug: yes debug_passwords: yes passdb: driver: shadow passdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf userdb: driver: passwd userdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix plugin: quota: fs:INBOX:mount=/var/mail/ quota2: fs:HOME:mount=/u/ quota_warning: storage=95%% /usr/local/bin/quota-warning.sh 95 quota_warning2: storage=80%% /usr/local/bin/quota-warning.sh 80 My dovecot-ldap.conf configuration: hosts = Y.Y.Y.Y:389 dn = cn=abc,ou=def,dc=ghi,dc=jk dnpass = password auth_bind = yes ldap_version = 3 auth_bind_userdn = cn=abc,ou=def,dc=ghi,dc=jk base = ou= xyz,dc=abc,dc=def scope = subtree pass_attrs = uid=user,userPassword=password pass_filter = (&(objectClass=posixAccount)(uid=%u)) default_pass_scheme = CRYPT -- -------------------------------------------------------- LCC Wilberth de Jesús Pérez Segura CCSA- Administración de Servicios y Seguridad de las TI Correo: wilberth.perez(a)uady.mx Universidad Autónoma de Yucatán Secretaría General Coordinación Administrativa de Tecnologías de Información RIUADY C-59 x Av. Itzáes (999)923-74-28 Ext. 1117 Mérida, Yucatán, México 2010 --------------------------------------------------------

1 0

[Dovecot] R: Re: R: Re: Dovecot 2.0 shared mailbox using ACLs problem
by p.quidacciolu＠libero.it 15 Jun '10

15 Jun '10

...something is still wrong. On the shared folders the commands "select" and "examine" work only the first time: -------%<-------------------------------------------------------- 3 select "shared/user1(a)pec.inail.gov.it" * FLAGS (\Answered \Flagged \Deleted \Seen \Draft Junk) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft Junk \*)] Flags permitted. * 6 EXISTS * 0 RECENT * OK [UNSEEN 4] First unseen. * OK [UIDVALIDITY 1276393110] UIDs valid * OK [UIDNEXT 15] Predicted next UID * OK [HIGHESTMODSEQ 7] Highest 3 OK [READ-WRITE] Select completed. .... 3 select "shared/user1(a)pec.inail.gov.it" 3 NO Mailbox doesn't exist: shared/user1(a)pec.inail.gov.it -------%<-------------------------------------------------------- >----Messaggio originale---- >Da: p.quidacciolu(a)libero.it >Data: 14/06/2010 12.32 >A: <tss(a)iki.fi> >Cc: <dovecot(a)dovecot.org> >Ogg: R: Re: [Dovecot] R: Re: Dovecot 2.0 shared mailbox using ACLs problem > >Yesterday I have tried the 2.0beta6. It seems to work fine! >Thanks a lot. > >>----Messaggio originale---- >>Da: tss(a)iki.fi >>Data: 11/06/2010 17.28 >>A: "p.quidacciolu(a)libero.it"<p.quidacciolu(a)libero.it> >>Cc: <dovecot(a)dovecot.org> >>Ogg: Re: [Dovecot] R: Re: Dovecot 2.0 shared mailbox using ACLs problem >> >>On to, 2010-06-10 at 19:38 +0200, p.quidacciolu(a)libero.it wrote: >>> Hi, >>> now I'm able to share/access to the shared mailbox, >>> but when try to write (as owner) in each mailbox, I catch a segfault of >the >>> imap process. >>> In the next the trace. >>> I'm using "dovecot-2-0-2d6cf78982dc". >> >>Hopefully http://hg.dovecot.org/dovecot-2.0/rev/f37d19f1c0a3 fixes this >>crash? >> >> >> > >

2 1

[Dovecot] passwd-file management utility
by Phil Howard 15 Jun '10

15 Jun '10

I'm now putting together tools/documentation to manage/administer the mail server, including, of course, managing users. Round one will be command line tools. In order to avoid re-invention, I was looking around for existing tools. I really cannot find any. So it seems I will be developing them. The first will be the one to manage users in the passwd-file format. So I'm just asking around if anyone has heard of such tools somewhere Google isn't finding (it does find lots of generic pages with the keywords used in other contexts). If not, I'll be building my own (and this will be for passwd-file format for the userdb/passdb),

1 0

[Dovecot] Anti-Spam Plugin! dovecot beta6
by Henrique Fernandes 15 Jun '10

15 Jun '10

I can compile the antispam plugin. Cause it compliajns about dovecot version. Does any one have other way of traing spam with spam assassin ? I just one if a user move an email to Spam folder dovecot sends an email with that email he moved for an especific email address, samething if he moves out is that possible ? antispam plugin does right ? the error output for compile. cc -c -DCONFIG_DEBUG -DDEBUG_SYSLOG -fPIC -shared -Wall -Wextra > -DPLUGINNAME=antispam -DHAVE_CONFIG_H -I/usr/include/dovecot/ > -I/usr/include/dovecot/src/ -I/usr/include/dovecot/src/lib/ > -I/usr/include/dovecot/src/lib-storage/ -I/usr/include/dovecot/src/lib-mail/ > -I/usr/include/dovecot/src/lib-imap/ -I/usr/include/dovecot/src/lib-dict/ > -I/usr/include/dovecot/src/lib-index/ -I/usr/include/dovecot/src/imap/ -o > debug.o debug.c > In file included from debug.c:5: > antispam-plugin.h:6:20: error: client.h: No such file or directory > In file included from antispam-plugin.h:9, > from debug.c:5: > /usr/include/dovecot/imap-search.h:34: error: field 'result' has incomplete > type > /usr/include/dovecot/imap-search.h:46: warning: 'struct imap_arg' declared > inside parameter list > /usr/include/dovecot/imap-search.h:46: warning: its scope is only this > definition or declaration, which is probably not what you want > /usr/include/dovecot/imap-search.h:50: warning: 'enum mail_sort_type' > declared inside parameter list > In file included from debug.c:5: > antispam-plugin.h:72: warning: 'struct mail_storage' declared inside > parameter list > antispam-plugin.h:73: warning: 'struct mail_storage' declared inside > parameter list > antispam-plugin.h:87:5: error: token ""2.0.beta6"" is not valid in > preprocessor expressions > antispam-plugin.h:92:25: error: missing binary operator before token "(" > antispam-plugin.h:139:27: error: missing binary operator before token "(" > antispam-plugin.h:168:2: error: #error "Building against this dovecot > version is not supported" > make: *** [debug.o] Error 1 > []'sf.rique

1 0

[Dovecot] v2.0.beta6 compilation problem under Solaris 9
by Juergen Obermann 15 Jun '10

15 Jun '10

Hello, compiling dovecot-2.0.beta6 under Solaris 9 runs into an error. I use the following setup: CC=cc export CC CPPFLAGS='-I/usr/local/include' export CPPFLAGS CFLAGS='-fast -xarch=v8plusa' export CFLAGS LDFLAGS='-L/usr/local/lib -R/usr/local/lib' export LDFLAGS ./configure --help ./configure --prefix=/opt/local ./gmake ...... Making all in lib-imap gmake[3]: Entering directory `/net/fileserv/export/sunsrc/src/dovecot-2.0.beta6/src/lib-imap' source='imap-match.c' object='imap-match.lo' libtool=yes \ DEPDIR=.deps depmode=none /bin/bash ../../depcomp \ /bin/bash ../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-test -I../../src/lib-charset -I../../src/lib-mail -I/usr/local/include -fast -xarch=v8plusa -c -o imap-match.lo imap-match.c libtool: compile: cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-test -I../../src/lib-charset -I../../src/lib-mail -I/usr/local/include -fast -xarch=v8plusa -c imap-match.c -KPIC -DPIC -o .libs/imap-match.o "imap-match.c", line 195: warning: syntax error: empty declaration "imap-match.c", line 199: identifier redeclared: imap_match_dup current : function(pointer to struct pool {pointer to const struct pool_vfuncs {..} v, unsigned int alloconly_pool :1, unsigned int datastack_pool :1}, pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}) returning pointer to struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data} previous: function(pointer to struct pool {pointer to const struct pool_vfuncs {..} v, unsigned int alloconly_pool :1, unsigned int datastack_pool :1}, pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}) returning pointer to struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data} : "imap-match.h", line 33 "imap-match.c", line 210: warning: syntax error: empty declaration "imap-match.c", line 214: identifier redeclared: imap_match_globs_equal current : function(pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}, pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}) returning _Bool previous: function(pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}, pointer to const struct imap_match_glob {pointer to struct pool {..} pool, pointer to struct imap_match_pattern {..} patterns, char sep, array[-1] of char patterns_data}) returning _Bool : "imap-match.h", line 36 cc: acomp failed for imap-match.c gmake[3]: *** [imap-match.lo] Error 1 Thank you for help. Greetings, Jürgen Obermann -- Hochschulrechenzentrum der | Mail: Juergen.Obermann(a)hrz.uni-giessen.de Justus-Liebig-Universitaet | WWW: http://www.uni-giessen.de/obermann Heinrich-Buff-Ring 44 | Tel: 0641-99-13054 (0641-99-13001) D-35392 Giessen, Germany | Fax: 0641-99-13009

2 3

Re: [Dovecot] dovecot vs. Thunderbird
by Bodo Schulz 15 Jun '10

15 Jun '10

Am 15.06.2010 13:21, schrieb Martin Ott: > Hi Bodo, > >> At this moment we have problems with access to the Public Folders. >> (We use as Client the actualy Thunderbird3 ...) >> >> When i want subscribe Folders, i have no access to folder are deeper as >> second level! > > I also encounterd this thunderbird behavior. It seems to help to fold and > unfold (+-) the folders in the subscribe menu. Thanks. But ... i cant fold or unfold! I see any subfolders. :( Screenshot? ;) I hear now from my co-worker that the Apple mail.app has the same problem. Greetings, Bodo

1 0

[Dovecot] Maildir + /var/mail
by Greg Pearson 15 Jun '10

15 Jun '10

Hi, I have just switched to Maildir, and I have noticed something. Even though it works properly, I have noticed that a file named /var/mail/user with 0 bytes length is still created. Is this normal? I use sendmail+procmail+dovecot. I have also tried the combined procmail+deliver approach with the same results. I also use a global /etc/procmailrc. Thank you

2 2

[Dovecot] Managesieve error
by Tim Traver 15 Jun '10

15 Jun '10

Hi all, ok, I am updating to the 2.0 way of doing things and have managed to get everything set up right, except I am getting the following errors when attempting to use managesieve with our webmail client (roundcube) that I didnt get when using dovecot 1.2.11... Jun 14 17:20:33 managesieve(address(a)domain.com): Warning: sieve-storage: Active sieve script symlink /home/mailboxes/data/domain/348/address(a)domain.com/.dovecot.sieve is broken: invalid/unknown path to storage (points to Maildir/sieve/roundcube.sieve). I checked, and the link appears to be there, and is a proper symlink to the sieve file... Here is the copy of my dovecot -n : # 2.0.beta6: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.0-RELEASE-p3 i386 auth_username_format = %Lu auth_username_translation = %@ auth_verbose = yes disable_plaintext_auth = no dotlock_use_excl = yes first_valid_uid = 100 listen = * lock_method = dotlock log_path = /local/logs/dovecot.errors mail_gid = 100 mail_location = maildir:%h/Maildir mail_nfs_index = yes mail_nfs_storage = yes mail_uid = 100 mmap_disable = yes passdb { args = /bin/checkpassword_dovecot_auth driver = checkpassword } plugin { quota = maildir sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap pop3 managesieve quota_full_tempfail = yes ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = prefetch } userdb { args = /bin/checkpassword_dovecot_deliver driver = checkpassword } verbose_proctitle = yes protocol lda { mail_plugins = quota sieve } protocol imap { mail_plugins = quota imap_quota } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh }

1 1

[Dovecot] Dovecot v2.0.beta6 - child ppppp killed with signal 11
by Mark Sapiro 15 Jun '10

15 Jun '10

Since upgrading from 2.0beta5 to beta6, I have seen a few pairs of log messages like the following: Jun 13 15:57:17 sbh16 dovecot: imap-login: Maximum number of connections from user+IP exceeded (mail_max_userip_connections=30): user=<gpc>, method=PLAIN, rip=76.126.100.210, lip=72.52.113.35, mpid=0, TLS Jun 13 15:57:17 sbh16 dovecot: master: Error: service(imap-login): child 16960 killed with signal 11 (core not dumped - add -D parameter to service executable The "Maximum number of connections from user+IP exceeded" message is not new - this is an issue with the K9 mail client on an android phone - but the killing of the child is new in beta 6. Is this intentional. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 2

[Dovecot] 2.0.beta6 panic (mailbox_list_get_unexpanded_path)
by Mike Abbott 14 Jun '10

14 Jun '10

2.0.beta6 assert-fails for me when: - using mdbox (maildir is OK) - my authentication module returns the mail= and mail_location= attributes (relying on mail_location from 10-mail.conf is OK) - a user logs in for the first time and selects his nonexistent INBOX The error is: Panic: file mailbox-list.c: line 318 (mailbox_list_get_unexpanded_path): assertion failed: (*location == '0') The location string is "1mdbox:/Volumes/Mail/joe". This did not happen with beta5. Backtrace: 0 __kill + 10 1 abort + 90 2 default_fatal_finish + 68 3 i_internal_error_handler + 0 4 i_debug + 0 5 mailbox_list_get_unexpanded_path + 111 6 mailbox_list_mkdir + 70 7 mdbox_map_open_internal + 169 8 mdbox_map_open_or_create + 14 9 mdbox_write_index_header + 51 10 mdbox_mailbox_create_indexes + 27 11 dbox_mailbox_create + 155 12 mailbox_open_full + 267 13 cmd_select_full + 1856 (cmd-select.c:287) 14 cmd_select + 11 (cmd-select.c:430) 15 client_command_input + 36 (imap-client.c:672) 16 client_command_input + 416 (imap-client.c:737) 17 client_handle_input + 134 (imap-client.c:778) 18 client_input + 118 (imap-client.c:829) 19 io_loop_handler_run + 234 20 io_loop_run + 56 21 master_service_run + 27 22 main + 689 (main.c:360) 23 start + 52

2 2

[Dovecot] convert Plugin Error
by Bradlee Landis 14 Jun '10

14 Jun '10

I am getting an error when using the convert plugin for dovecot. Jun 14 13:27:20 mail dovecot: IMAP(user): Mailbox conversion: rename(/home/user/mail, /home/user/mail-converted) failed: Directory not empty Dovecot creates mail-converted, but does not delete mail completely for some reason. It continues to add a message from the mbox to Maildir format, creating duplicates every time I check my email. I can fix it by deleting mail-converted, but I don't want this to happen to other users on the system. Does anyone have a clue as to why it's doing this, and what I can do to fix it? I can send you my mbox file and home directory structure if you'd like to take a gander at it. Dovecot v1.0.7 Scientific Linux 5.4 (Importing mbox files from RHEL 3.8). -- Thanks, Brad Landis

1 0

[Dovecot] Dovecot 2.0
by Thiago Henrique 14 Jun '10

14 Jun '10

Hello, Is there any estimate of when it will launch a stable release Dovecot 2.0 ? Thank you very much. Best Regards -- []'s Thiago Henrique Network Administration Digirati Networks K8 Networks

3 2

[Dovecot] Ubuntu upgrade to 10.04 --> dovecot no longer working
by HenkR 14 Jun '10

14 Jun '10

Hi, Last year I installed dovecot on my Ubuntu V9 system 64 bit system. I use it to store emails from several clients in the LAN using IMAP. Last week I upgraded to Ubuntu 10.04. Now Dovecot is no longer working. It started with messages about sieve, so I disabled sieve in the configuration file (did not use it in the past, don't know what it is). Dovecot can now be started without errors or warnings, but I cannot connect in the client. I get a message saying "could not connect to server: connection refused". Can anybody help? kind regards, Henk -- View this message in context: http://old.nabble.com/Ubuntu-upgrade-to-10.04---%3E-dovecot-no-longer-worki… Sent from the Dovecot mailing list archive at Nabble.com.

3 2

[Dovecot] zlib delivery in 2.0beta6
by Bernhard Schmidt 14 Jun '10

14 Jun '10

Hi, I just wanted to test the zlib plugin in Dovecot 2.0 and have a problem. Delivery via LMTP works fine and the mail is saved compressed. -rw------- 1 vmail vmail 1012 13. Jun 12:51 1276426292.M93539P15363.mail.svr02.mucip.net,S=2799,W=2850:2, # file 1276426292.M93539P15363.mail.svr02.mucip.net,S=2799,W=2850:2, 1276426292.M93539P15363.mail.svr02.mucip.net,S=2799,W=2850:2,: gzip compressed data, from Unix # zcat 1276426292.M93539P15363.mail.svr02.mucip.net,S=2799,W=2850:2, | wc 51 277 2799 But a client (both Thunderbird and Mutt) cannot access the mail. Jun 13 12:53:55 mail dovecot: imap-login: Login: user=<bernilrz>, method=PLAIN, rip=2001:a60:f001:1:219:66ff:fe8b:a6e, lip=2001:1b10:1000::110:1:1, mpid=15416, TLS Jun 13 12:53:55 mail dovecot: imap(bernilrz): Error: FETCH [] for mailbox unsorted UID 33930 got too little data: 1018 vs 2850 Jun 13 12:53:55 mail dovecot: imap(bernilrz): Error: Maildir filename has wrong W value: /var/mail/vmail/b/bernilrz/.unsorted/cur/1276426292.M93539P15363.mail.svr02.mucip.net,S=2799,W=2850 Jun 13 12:53:55 mail dovecot: imap(bernilrz): Error: Corrupted index cache file /var/cache/dovecot/b/bernilrz/.unsorted/dovecot.index.cache: Broken virtual size for mail UID 33930 Jun 13 12:53:55 mail dovecot: imap(bernilrz): Disconnected: FETCH failed bytes=124/1952 I figured the cache might just be corrupt and I deleted all cachefiles, but the issue keeps reappearing. Has anyone done this before? Config: # 2.0.beta6 (7a02b84ad7f5): /etc/dovecot/dovecot.conf # OS: Linux 2.6.33.4 x86_64 Debian squeeze/sid default_login_user = dovecot disable_plaintext_auth = no listen = 83.170.6.69, 2001:1b10:1000::110:1:1 mail_gid = vmail mail_location = maildir:%h/:INDEX=/var/cache/dovecot/%1n/%n mail_uid = vmail maildir_stat_dirs = yes maildir_very_dirty_syncs = yes passdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } plugin { quota = dict:user::file:%h/dovecot-quota quota_rule = *:storage=500M sieve = ~/.dovecot.sieve sieve_dir = ~/sieve zlib_save = gz zlib_save_level = 6 } postmaster_address = postmaster(a)birkenwald.de protocols = imap pop3 lmtp managesieve quota_full_tempfail = yes service auth { unix_listener /var/spool/postfix-mailout/private/auth { group = postfix mode = 0660 user = postfix } unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0660 } } service lmtp { inet_listener { port = 24 } } service managesieve-login { inet_listener sieve_deprecated { port = 2000 } process_min_avail = 1 } ssl_cert = </etc/ssl/private/pop3.mucip.net.crt ssl_key = </etc/ssl/private/pop3.mucip.net.key userdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } verbose_proctitle = yes protocol lda { mail_plugins = sieve quota zlib } protocol imap { imap_idle_notify_interval = 600 s mail_plugins = quota imap_quota zlib } protocol lmtp { mail_plugins = sieve quota zlib } protocol pop3 { mail_plugins = $mail_plugins zlib pop3_uidl_format = %08Xu%08Xv } Thanks, Bernhard

2 1

[Dovecot] v2.0.beta6 released
by Timo Sirainen 14 Jun '10

14 Jun '10

http://dovecot.org/releases/2.0/beta/dovecot-2.0.beta6.tar.gz http://dovecot.org/releases/2.0/beta/dovecot-2.0.beta6.tar.gz.sig Unfortunately this still isn't rc1 yet, but the next one will be, I promise :) Basically all of the important changes are done now. The TODO list for rc1 is: - Test and fix dsync bugs - Finish director - Add man pages started by Pascal Volk. BTW. He asked for some feedback about them, but got only one reply: http://dovecot.org/list/dovecot/2010-June/049438.html I've also read through and answered nearly all of my email backlog. If you haven't gotten a reply, resend the mail. Some changes since beta5: - Added director: http://blog.dovecot.org/2010/05/new-director-service-in-v20-for-nfs.html - IMAP: Added STATUS (X-VSIZE) command for easily getting mailbox's virtual size. - Lots and lots of doveadm improvements and new commands - Postlogin scripts now need to be executed using "script-login", not "script" binary. - Quota warnings are executed now asynchronously using the new script binary. See http://hg.dovecot.org/dovecot-2.0/rev/a179fcbbf960 - Added passdb static for proxying and similar configurations - TLS SNI configuration must now be done using local_name {} blocks, not local {} - lib-storage plugin API changes, external plugins must be updated to work correctly - Lots of fixes

2 1

[Dovecot] R: Re: R: Re: Dovecot 2.0 shared mailbox using ACLs problem
by p.quidacciolu＠libero.it 14 Jun '10

14 Jun '10

Yesterday I have tried the 2.0beta6. It seems to work fine! Thanks a lot. >----Messaggio originale---- >Da: tss(a)iki.fi >Data: 11/06/2010 17.28 >A: "p.quidacciolu(a)libero.it"<p.quidacciolu(a)libero.it> >Cc: <dovecot(a)dovecot.org> >Ogg: Re: [Dovecot] R: Re: Dovecot 2.0 shared mailbox using ACLs problem > >On to, 2010-06-10 at 19:38 +0200, p.quidacciolu(a)libero.it wrote: >> Hi, >> now I'm able to share/access to the shared mailbox, >> but when try to write (as owner) in each mailbox, I catch a segfault of the >> imap process. >> In the next the trace. >> I'm using "dovecot-2-0-2d6cf78982dc". > >Hopefully http://hg.dovecot.org/dovecot-2.0/rev/f37d19f1c0a3 fixes this >crash? > > >

1 0

[Dovecot] Shared Mailbox Questions
by Chris Hobbs 11 Jun '10

11 Jun '10

Hi All, I've pored over the wiki, read through the archive, and have what I believe should be a working set-up, but I can't seem to get my shared namespace to work correctly. Any guidance would be much appreciated. I started off using a flat file for acl_shared_dict and ran into the same problem recently reported with the shared-database file getting chown'd to the first user to touch it with 0600 permissions. So I thought I'd give it a whirl with sqlite. Here are the (hopefully) relevant bits from dovecot -n (the entire output is posted below). This is dovecot 1.2.9 running on a freshly installed ubuntu 10.4 server: namespace: type: shared separator: / prefix: shared/%%u/ location: maildir:/home/staff/%%n/Maildir:INDEX=~/Maildir/shared/%%u list: children plugin: acl_shared_dict: proxy::acl dict: acl: sqlite:/etc/dovecot/acl-shared-dict.conf acl-shared-dict.conf looks like this: connect = /home/staff/dovecot/acl-shared-ns.sqlite map { table = acl_shared_ns pattern = shared/shared-boxes/user/$to/$from value_field = has_visible_folders fields { from_user = $from to_user = $to } } /home/staff/dovecot/acl-shared-ns.sqlite is set 0666, and I can add records to it from the sqlite command line as a normal user. The table was created with: CREATE TABLE acl_shared_ns (from_user, to_user, has_visible_folders, PRIMARY KEY (from_user) ON CONFLICT REPLACE); When I attempt to SETACL from a telnet imap session, I get the following errors in mail.err: Jun 9 22:10:23 imap2 dovecot: dict: dict sql iterate failed: file is encrypted or is not a database Jun 9 22:10:23 imap2 dovecot: dict: dict sql iterate failed: file is encrypted or is not a database Jun 9 22:10:23 imap2 dovecot: dict: sqlite: exec(INSERT INTO acl_shared_ns (has_visible_folders,to_user,from_user) VALUES ('1','chobbs','IOchoa')) failed: file is encrypted or is not a database (26) Jun 9 22:10:23 imap2 dovecot: IMAP(IOchoa): read(/var/run/dovecot/dict-server) failed: Remote disconnected Jun 9 22:10:23 imap2 dovecot: IMAP(IOchoa): acl: dict commit failed Jun 9 22:10:23 imap2 dovecot: dovecot: child 8268 (dict) killed with signal 11 (core dumps disabled) Running that same "INSERT INTO..." as the IOchoa user from the sqlite command line works just fine. At this point any further deleteacl or setacl commands simply hang, presumably because there's no longer a running dict process. Here is the entire output of dovecot -n: # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-22-server x86_64 Ubuntu 10.04 LTS log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s managesieve listen(default): * listen(imap): * listen(pop3): * listen(managesieve): *:2000 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_privileged_group: mail mail_uid: mail mail_gid: mail mail_location: maildir:~/Maildir mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): acl imap_acl mail_plugins(imap): acl imap_acl mail_plugins(pop3): mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: shared separator: / prefix: shared/%%u/ location: maildir:/home/staff/%%n/Maildir:INDEX=~/Maildir/shared/%%u list: children lda: deliver_log_format: %$ -- FROM=%f SUBJECT=%s mail_plugins: cmusieve acl log_path: info_log_path: syslog_facility: mail postmaster_address: postmaster(a)nhusd.k12.ca.us hostname: mail.nhusd.k12.ca.us auth default: passdb: driver: pam passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: passwd userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf plugin: acl: vfile acl_shared_dict: proxy::acl sieve: ~/.dovecot.sieve sieve_dir: ~/sieve dict: acl: sqlite:/etc/dovecot/acl-shared-dict.conf Chris Hobbs Director, Technology New Haven Unified School District -- This message was scanned by ESVA and is believed to be clean.

2 2

[Dovecot] "failed to store into mailbox 'INBOX': Not enough disk space." with large mail
by Johannes Dröge 11 Jun '10

11 Jun '10

Hello, I am having this error message on some rare emails with more than 6 mb or so. Neither the dovecot server nor the filesystem where the maildir resides have any quota or are full at the time of delivering. The mails goes getmail->postfix->dovecot delivery agent Is the mail written to any other place than the maildir folder? Even though all my temp folders should also be able to hold some megabytes... Thanks for any help, Johannes message: *sieve: info: started log at ... error: msgid=<XXX>: failed to store into mailbox 'INBOX': Not enough disk space. * dovecot --version 1.2.10 dovecot -n # 1.2.10: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-686 i686 Debian 5.0.4 xfs log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps ssl_cert_file: /etc/certificates/XXX ssl_key_file: /etc/certificates/XXX login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login login_greeting: XXX mail_access_groups: mail mail_location: maildir:/services/mail/%u mbox_write_locks: fcntl dotlock lda: postmaster_address: root mail_plugins: sieve auth default: verbose: yes passdb: driver: pam userdb: driver: passwd plugin: sieve: /var/sieve-scripts/%u/filter.sieve

8 20

[Dovecot] question about rpc quota reporting 1.2.11
by Tom Lieuallen 11 Jun '10

11 Jun '10

Timo, thank you for the reply to my question about shared folders yesterday. I'm now trying to get quota reporting working consistently. This is with dovecot 1.2.11 in solaris 10 sparc. We have local quotas for the mail spool (/a1) and quotas for home directories. All are UFS and have rpc (rquota) working fine. With just this: protocol imap { mail_plugins = quota imap_quota } My mail client (thunderbird 3.0.4) reported the home directory quota. So then I added this: plugin { quota = fs:INBOX:mount=/a1 quota2 = fs:Home:mount=%h } First, I had to make /a1/quotas world readable, otherwise I'd get this error: open(/a1/quotas) failed: Permission denied I'm getting the same type of error with the quota2 line now: open(/nfs/rack/u4/quotas) failed: Permission denied Since the home directory quota worked without the plugin configuration, my guess is that the plugin config is not using rpc. I can't find any way to force it to use rpc. Again, if I make that 'quotas' file world readable (which I believe isn't good practice), dovecot stops complaining. Also, what should I expect to see on the client? Will dovecot report only one quota (the one that's closer to the limit), or will it report both? I've only seen the first quota in thunderbird, but that could easily be a client issue. thank you Tom Lieuallen Oregon State University

2 4

[Dovecot] null errors from 2.0.beta5
by Mike Abbott 11 Jun '10

11 Jun '10

When my dovecot-2.0.beta5 auth module logs a 552-byte debug message, the message is split into two lines and also a null error message: Wed Jun 9 23:44:29 gromit dovecot[58892]: auth: Error: I think this has to do with the use of PIPE_BUF (512) sized buffers in the logging code, and the !line_is_ok() case in i_failure_parse_line(). Could you please remove the null error message? Just a nuisance, nothing serious. Thanks.

2 2

[Dovecot] lazy-expunge acl bug?
by Martin Ott 11 Jun '10

11 Jun '10

Hi, we've defined a public namespace "shared" and use the acl and lazy-expunge plugins among others. The problem is, that a mailbox is deleted by the DELETE-command without the x-flag to be set (# 1.2.9): a myrights shared/aclDeleteTest * MYRIGHTS "shared/aclDeleteTest" lrsed a OK Myrights completed. b delete shared/aclDeleteTest b OK Delete completed. c myrights shared/aclDeleteTest c NO Mailbox doesn't exist: aclDeleteTest This behavior should be different and the mailbox should not be deleted, should it? Is there a fast workaround? Without the e-flag, mailboxes can't be deleted. But as some users should be allowed to use the expunge operation, it's no option to remove the e-flag... thx Martin

2 7

[Dovecot] problems with shared mailboxes and other general issues
by Tom Lieuallen 11 Jun '10

11 Jun '10

I'm also having beginner's troubles with shared mailboxes with dovecot 1.2.11. I've used the TestInstallation instructions for connecting to the imap port via openssl and issuing the setacl/getacl commands. Those appear to be fine. I'm having real difficulty with the acl_shared_dict configuration. I'd prefer to just use a flat file, as I don't anticipate using shared folders very frequently. I don't need a database and would greatly prefer not to have a dependency on our database service. So, with this setting: acl_shared_dict = file:/private/dovecot/var/etc/shared-mailboxes The '../var/etc' directory is something like 755. I have to create the file first and make it 666. When it is updated, ownership & permissions are changed such that the user giving acl permissions then owns the file and it's 600. I tried setting it back to 644 afterward, so other users could read it, but they tried setting a lock in that dir as well. I tried this: acl_shared_dict = file:/private/dovecot/var/etc/shared-list/shared-mailboxes-%u Then I made shared-list have '1777' permissions. Permissions-wise, this will now work, including locks, but I'm guessing this is just plain wrong and I still can't verify access. My second choice was to use sqlite for this acl_shared_dict, but, even though I compiled dovecot with sqlite support and 'ldd' shows that '../libexec/dict' is linked against sqlite libraries, when I tried this config: acl_shared_dict = sqlite:/private/dovecot/etc/acl-shared-dict.conf I get this, and dovecot fails to start up. EUnknown dict module: sqlite I question whether I can use sqlite for acl_shared_dict. Furthermore, in this vein, I don't really know what the shared namespace should even look like. I've been trying the imap commands LIST and MYRIGHTS to verify access, but there are simply no examples. I'd rather expect this to work: x myrights shared/fromuser/folder but all I get is mailbox doesn't exist. I know 'shared' is the namespace, but I just don't know how it should really be referred to. Personally, I can live without the acl_shared_dict (from what I understand). I don't need to see the shared path for subscription, I'd just manually add the folder path to the .subscriptions file for the handful of users that need it. I just don't think it's working, though. On a related note, I thought I'd increase debugging to see if that helped out any. When I change 'mail_debug' to 'yes', as soon as I issue the imap login command, it logs some stuff, then kicks me out. Jun 09 15:57:53 IMAP(tom2): Info: acl: initializing backend with data: vfile Jun 09 15:57:53 IMAP(tom2): Info: acl: acl username = tom2 Jun 09 15:57:53 IMAP(tom2): Info: acl: owner = 1 Jun 09 15:57:53 dovecot: Error: child 6000 (imap) killed with signal 11 (core dumps disabled) I would assume this error is causing my problems, but for all I know, it could be a side-effect of verbose debugging -- to just terminate. I see nothing about that in the docs, though. imap works fine without verbose logging, so I'm baffled. I have been frustrated by the shared namespace documentation. I've been through it again and again, but haven't found the answers I've been looking for. Here is the relevant configuration: namespace shared { location = mbox:%%h/mail/shared:INDEX=%%h/mail/shared/.imap # everything else defaults } protocol imap { mail_plugins = quota imap_quota acl imap_acl } protocol lda { mail_plugins = acl } plugin { acl = vfile acl_shared_dict = file:/private/dovecot/var/etc/shared-list/shared-mailboxes-%u }

2 3

[Dovecot] R: Re: Dovecot 2.0 shared mailbox using ACLs problem
by p.quidacciolu＠libero.it 11 Jun '10

11 Jun '10

Hi, now I'm able to share/access to the shared mailbox, but when try to write (as owner) in each mailbox, I catch a segfault of the imap process. In the next the trace. I'm using "dovecot-2-0-2d6cf78982dc". -------% <----------------------------------------------------------------------------------------------- Process 3504 attached - interrupt to quit gettimeofday({1276190723, 456087}, NULL) = 0 gettimeofday({1276190723, 456268}, NULL) = 0 epoll_wait(8, {{EPOLLIN, {u32=21055056, u64=21055056}}}, 6, 1561185) = 1 gettimeofday({1276190728, 692157}, NULL) = 0 gettimeofday({1276190728, 692268}, NULL) = 0 read(10, "8 append \"myshare\" (\\Seen Junk) \"08"..., 7928) = 2472 stat("/mnt/mbox1/mailusers/user2(a)example.gov.it/Maildir/.myshare/dovecot-acl", {st_mode=S_IFREG|0600, st_size=40, ...}) = 0 stat("/mnt/mbox1/mailusers/user2(a)example.gov.it/Maildir/.myshare", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0 stat("/mnt/mbox1/mailusers/user2(a)example.gov.it/Maildir/.myshare", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0 stat("/mnt/mbox1/mailusers/user2(a)example.gov.it/Maildir/.myshare", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0 stat("/mnt/mbox1/mailusers/user2(a)example.gov.it/Maildir/.myshare", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0 stat("/mnt/mbox1/mailusers/user2(a)example.gov.it/Maildir/.myshare/tmp", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0 stat("/mnt/mbox1/mailusers/user2(a)example.gov.it/Maildir/.myshare/dovecot- shared", 0x7fff8358bdc0) = -1 ENOENT (No such file or directory) access("/mnt/mbox1/mailusers/user2(a)example.gov.it/Maildir/.myshare/cur", W_OK) = 0 open("/mnt/mbox1/mailusers/user2(a)example.gov.it/Maildir/.myshare/dovecot.index. log", O_RDWR) = 9 fstat(9, {st_mode=S_IFREG|0600, st_size=640, ...}) = 0 pread(9, "\1\2 (\0\331\32\21L\2\0\0\0\1\0\0\0\0\0\0\0\331\32\21L\0\0\0\0\0\0\0\0"..., 40, 0) = 40 stat("/mnt/mbox1/mailusers/user2(a)example.gov.it/Maildir/.myshare/dovecot.index. log.2", 0x7fff8358bcb0) = -1 ENOENT (No such file or directory) open("/mnt/mbox1/mailusers/user2(a)example.gov.it/Maildir/.myshare/dovecot. index", O_RDWR) = -1 ENOENT (No such file or directory) stat("/mnt/mbox1/mailusers/user2(a)example.gov.it/Maildir/.myshare/dovecot.index. log", {st_mode=S_IFREG|0600, st_size=640, ...}) = 0 fstat(9, {st_mode=S_IFREG|0600, st_size=640, ...}) = 0 pread(9, "\200\200\200\211@\0\0\20\377\377\377\377\0\0\0\0$\0\0\0\0\0\0\0\1\0\7\0mail"..., 8192, 40) = 600 pread(9, "", 8192, 640) = 0 epoll_ctl(8, EPOLL_CTL_DEL, 10, {0, {u32=21055056, u64=21055056}}) = 0 epoll_ctl(8, EPOLL_CTL_ADD, 10, {EPOLLIN|EPOLLPRI|EPOLLERR|EPOLLHUP, {u32=21055056, u64=21055056}}) = 0 open("/etc/localtime", O_RDONLY) = 11 fstat(11, {st_mode=S_IFREG|0644, st_size=2652, ...}) = 0 fstat(11, {st_mode=S_IFREG|0644, st_size=2652, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2ab70eac0000 read(11, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\6\0\0\0\6\0\0\0\0"..., 4096) = 2652 lseek(11, -1701, SEEK_CUR) = 951 read(11, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\10\0\0\0\10\0\0\0\0"..., 4096) = 1701 close(11) = 0 munmap(0x2ab70eac0000, 4096) = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Process 3504 detached -------% <----------------------------------------------------------------------------------------------- >----Messaggio originale---- >Da: tss(a)iki.fi >Data: 07/06/2010 21.12 >A: "p.quidacciolu(a)libero.it"<p.quidacciolu(a)libero.it> >Cc: <dovecot(a)dovecot.org> >Ogg: Re: [Dovecot] Dovecot 2.0 shared mailbox using ACLs problem > >On pe, 2010-04-02 at 11:07 +0200, p.quidacciolu(a)libero.it wrote: > >> I'm trying to configure shared mailboxes using ACLs. >> On dovecot 1.2.10 it works fine, but the same configuration on dovecot 2.0. >> beta4 doesn't work. >> When I try to access to the shared mailbox I get the following message: >> Query: SELECT "users/user2/INBOX" >> Reason Given: Mailbox doesn't exist: users/user2/INBOX > >Have you tried this with recent nightly snapshots? > > >

2 2

Re: [Dovecot] Thunderbird namespace handling
by xueron＠xueron.com 11 Jun '10

11 Jun '10

>---- Original Message ---- >From: Timo Sirainen <tss(a)iki.fi> >To: "Thomas Hummel" <hummel(a)pasteur.fr> >Cc: "Dovecot Mailing List" <dovecot(a)dovecot.org> >Sent: Fri, Jun 11, 2010, 21:49 PM >Subject: Re: [Dovecot] Thunderbird namespace handling > >On to, 2010-06-10 at 18:18 +0200, Thomas Hummel wrote: >> > See this thread: >> > http://mailman2.u.washington.edu/pipermail/imap-protocol/2010-May/001076.ht… >> >> I've read it but I still don't get the point : >> >> I thought "hidden = no" would advertise this namespace for clients >> which support NAMESPACE and that "list = yes" would allow clients which >> don't support NAMESPACE to access this namespace ? >> >> What's wrong with that ? > >The point of that thread was: With list=yes the client already can >access the mailboxes in it without knowing anything about namespaces, so >listing it also in namespaces is pointless.

1 0

[Dovecot] Question about directory hashing
by Javier de Miguel Rodríguez 11 Jun '10

11 Jun '10

Hello I have been reading http://wiki.dovecot.org/MailLocation and http://wiki.dovecot.org/Variables and I do not fully understand the directory hashing feature. I want to migrate > 70.000 users from Sun Messaging to Dovecot using imapsync. I have tested with mail_location=maildir:/buzones/us.es/%1Hu/%2.1u/%n but I get the following directory tree: `-- 0 |-- - |-- 1 |-- 2 |-- 3 |-- 8 |-- _ |-- a |-- ab |-- b |-- c |-- d |-- e |-- ev |-- f |-- g |-- h |-- i |-- ie |-- is |-- j |-- jb |-- jj |-- jp |-- js |-- k |-- l |-- m |-- mb |-- n |-- o |-- p |-- pp |-- q |-- r |-- rm |-- s |-- t |-- u |-- v |-- w |-- x |-- y `-- z The ideal directory layout should be the following: First directory level: Letters from a to z Second directory level: Numbers from 0 to 200 Third directory level: %n (username without @domain) How can I achive this directory layout (or other optimized for 70.000 users) . I use ext3 on Red Hat Enterprise Linux 5 with directory indexes on. Regards Javier de Miguel

2 1

[Dovecot] Fail2ban
by Jerrale Gayle 11 Jun '10

11 Jun '10

I have fail2ban working for EVERYTHING else except dovecot. I have tried using my own custom regex in conjunction with the regex on the dovecot.org site. Neither are picked up by fail2ban and I'm trying to use an imminent attack agaist dovecot, going on now, to my advantage to see when I get the right regexp. Here are my current ones: failregex = .*dovecot: (?:pop3-login|imap-login): (?:Disconnected|Aborted login) $(?:auth failed, .* attempts|no auth attempts)$:.*rip=<HOST>,.* <<< this is my custom (?: pop3-login|imap-login): (?:Authentication failure|Aborted login \(auth failed|Aborted login \(tried to use disabled|Disconnected \(auth failed).*rip=(?P<host>\S*),.* <<< from dovecot.org .*warning:.\S*\[(?P<host>)\]: SASL.(?:PLAIN|LOGIN).authentication failed:.* Here is the current attack: Jun 10 17:18:10 mail dovecot: pop3-login: Disconnected (auth failed, 1 attempts): user=<rahul>, method=PLAIN, rip=113.12.82.71, lip=173.50.101.12 Can someone help me out a little? Thanks, Jerrale G

6 6

[Dovecot] Evolution and Thunderbird do different things?
by Phil Howard 10 Jun '10

10 Jun '10

I'm trying both Evolution and Thunderbird on my IMAP server, and find that there are differences in how some things are done, between clients. Shouldn't there have been a standard way to do these things in the IMAP protocol? The first thing I noticed is that when deleting email from one client, it puts a "T" on the file name, leaving it where it is, and from the other client, it moves the mail to a ".Trash" directory on the server (and created a 2nd "Trash" folder ... so now I have 2 "Trash" folders, one with some deleted mail in it, and the other with some deleted mail in it). I'm not saying Dovecot has a problem here. But maybe IMAP the protocol does for not having a standard way to do things, and these clients, for not doing it the same way (if there is some standard somewhere). Any IMAP experts here know what the story is with this?

5 8

[Dovecot] Problem with LDAP query
by Aleix Dorca 10 Jun '10

10 Jun '10

Hi people, first message to this list. I've a problem with dovecot 1.0.15 (debian latest package) and an LDAP query. The situation is the following. My LDAP users have multiple mail addresses (field 'mail') and mail should be able to be sent to any of these and the mail should always end on the user's mailbox. This is not working for me now. My dovecot-ldap.conf relevant config shows: user-attrs = uid=user user_filter = (&(objectClass=posixAccount)(|(uid=%n)(mail=%u))) This correctly detects multiple addresses but mail always end in folder (from dovecot.conf): mail_location = maildir:/home/vmail/%n/Maildir So if user@domain gets a mail it ends in /home/vmail/user/Maildir but if the same user gets an email to user-alt@domain it ends in /home/vmail/user-alt/Maildir instead of /home/vmail/user/Maildir. I've been debugging and I get this on my mail.log file: Jun 10 12:41:29 horologium deliver(user-alt@domain): auth input: user-alt@domain Jun 10 12:41:29 horologium deliver(user-alt@domain): auth input: user=user Jun 10 12:41:29 horologium deliver(user-alt@domain): auth input: uid=5000 Jun 10 12:41:29 horologium deliver(user-alt@domain): auth input: gid=5000 Jun 10 12:41:29 horologium deliver(user-alt@domain): maildir: data=/home/vmail/user-alt/Maildir Jun 10 12:41:29 horologium deliver(user-alt@domain): maildir: root=/home/vmail/user-alt/Maildir, index=/home/vmail/user-alt/Maildir, control=, inbox= Since I'm in version 1.0.15 can't use the mailLocation with the $ substitution. Anyway, any help will be appreciated. My dovecot -n result: # 1.0.15: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/dovecot/certs/domain.crt ssl_key_file: /etc/dovecot/certs/domain.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:/home/vmail/%n/Maildir mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: mechanisms: plain login passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail Thanks a lot, Aleix Dorca.

1 0

[Dovecot] Dovecot v2.0.beta5 (2d6cf78982dc): Crashes upon client login
by Thomas Leuxner 10 Jun '10

10 Jun '10

Core dump upon client login with latest changes, gdb attached: ==> /var/log/dovecot.log <== Jun 8 19:26:05 spectre dovecot: master: Dovecot v2.0.beta5 (2d6cf78982dc) starting up Jun 8 19:26:21 spectre dovecot: imap-login: Login: user=<tlx(a)leuxner.net>, method=PLAIN, rip=10.10.10.10, lip=1.2.3.4, mpid=9997, TLS Jun 8 19:26:21 spectre dovecot: master: Error: service(imap): child 9997 killed with signal 11 (core dumped) Jun 8 19:26:21 spectre dovecot: imap-login: Login: user=<tlx(a)leuxner.net>, method=PLAIN, rip=10.10.10.10, lip=1.2.3.4, mpid=9999, TLS Jun 8 19:26:21 spectre dovecot: master: Error: service(imap): child 9999 killed with signal 11 (core dumped) Jun 8 19:26:26 spectre dovecot: imap-login: Login: user=<tlx(a)leuxner.net>, method=PLAIN, rip=10.10.10.10, lip=1.2.3.4, mpid=10001, TLS Jun 8 19:26:28 spectre dovecot: master: Error: service(imap): child 10001 killed with signal 11 (core dumped) Jun 8 19:26:32 spectre dovecot: master: Warning: Killed with signal 15 (by pid=10021 uid=0 code=kill) Core was generated by `dovecot/imap'. Program terminated with signal 11, Segmentation fault. [New process 10001] #0 quota_mailbox_transaction_commit (ctx=0x1d66660, changes_r=0x7fffec59fd80) at quota-storage.c:91 91 quota-storage.c: No such file or directory. in quota-storage.c #0 quota_mailbox_transaction_commit (ctx=0x1d66660, changes_r=0x7fffec59fd80) at quota-storage.c:91 qbox = (struct quota_mailbox *) 0x1d5df50 qt = (struct quota_transaction_context *) 0x0 #1 0x00007fcfcaf5b69d in mailbox_transaction_commit_get_changes (_t=<value optimized out>, changes_r=0x7fffec59fd80) at mail-storage.c:1194 _data_stack_cur_id = 4 t = (struct mailbox_transaction_context *) 0x1d66660 ret = <value optimized out> #2 0x00007fcfcaf5b6d6 in mailbox_transaction_commit (t=0x18) at mail-storage.c:1178 changes = {pool = 0xa0, uid_validity = 0, saved_uids = {arr = {buffer = 0x0, element_size = 30553128}, v = 0x0, v_modifiable = 0x0}, ignored_uid_changes = 30770416, ignored_modseq_changes = 0} ret = <value optimized out> #3 0x0000000000415a93 in imap_search_deinit (ctx=0x1d584e0) at imap-search.c:575 ret = 0 #4 0x00000000004160cc in cmd_search_more (cmd=0x1d583d8) at imap-search.c:402 ctx = (struct imap_search_context *) 0x1d584e0 opts = SEARCH_RETURN_ALL sync_flags = <value optimized out> end_time = {tv_sec = 30988688, tv_usec = 1024} id = 18766 id_min = <value optimized out> id_max = 0 time_msecs = <value optimized out> tryagain = false lost_data = false __FUNCTION__ = "cmd_search_more" #5 0x0000000000416484 in imap_search_start (ctx=0x1d584e0, sargs=0x1d65698, sort_program=0x0) at imap-search.c:550 cmd = (struct client_command_context *) 0x1d583d8 wanted_fields = 0 wanted_headers = (struct mailbox_header_lookup_ctx *) 0x0 #6 0x000000000040d443 in cmd_search (cmd=0x1d583d8) at cmd-search.c:45 ctx = <value optimized out> sargs = (struct mail_search_args *) 0x1d65698 args = (const struct imap_arg *) 0x1d5ac30 charset = 0x41a0cc "UTF-8" ret = 0 #7 0x000000000041030c in client_command_input (cmd=0x1d583d8) at imap-client.c:646 client = (struct client *) 0x1d57c78 command = <value optimized out> __FUNCTION__ = "client_command_input" #8 0x00000000004103bd in client_command_input (cmd=0x1d583d8) at imap-client.c:696 client = (struct client *) 0x1d57c78 command = (struct command *) 0x8 __FUNCTION__ = "client_command_input" #9 0x0000000000410535 in client_handle_input (client=0x1d57c78) at imap-client.c:737 _data_stack_cur_id = 3 ret = 34 remove_io = <value optimized out> handled_commands = false __FUNCTION__ = "client_handle_input" #10 0x0000000000410f82 in client_input (client=0x1d57c78) at imap-client.c:788 cmd = <value optimized out> output = (struct ostream *) 0x1d58258 bytes = <value optimized out> __FUNCTION__ = "client_input" #11 0x00007fcfcacf98eb in io_loop_handler_run (ioloop=<value optimized out>) at ioloop-epoll.c:212 ctx = (struct ioloop_handler_context *) 0x1d2b7d0 event = (const struct epoll_event *) 0x1d2b840 list = (struct io_list *) 0x1d58330 io = (struct io_file *) 0x1d582f0 tv = {tv_sec = 1799, tv_usec = 999330} t_id = 2 msecs = <value optimized out> ret = 1 call = <value optimized out> #12 0x00007fcfcacf8a68 in io_loop_run (ioloop=0x1d2b5c0) at ioloop.c:350 No locals. #13 0x00007fcfcace8563 in master_service_run (service=0x1d2b490, callback=0x18) at master-service.c:480 No locals. #14 0x0000000000419121 in main (argc=1, argv=0x1d2b370) at main.c:359 service_flags = <value optimized out> storage_service_flags = <value optimized out> postlogin_socket_path = 0x0 username = 0x0 c = <value optimized out> set_roots = {0x41c320, 0x0}

2 5

[Dovecot] converting from vm-pop3d
by Tim Uckun 09 Jun '10

09 Jun '10

Hello All. I am looking into an old server which is running vm-pop3d. This server is having problems because the pop3 server is taking up 100% of the CPU. I looked at the largest mailboxes and there are a handful over 20 megs in size, the largest one is 55megs, they are all mbox format (I think). I have been looking at the wiki and it looks like there is a perl script to make the mailboxes behave. There are also other scripts that try and convert mbox to maildir formats and from what I can gather dovecot can do this as well. Finally the dovecot in the fedora repos is 1.0.X and I notice that the latest in 1.2.X is there a more up to date dovecot RPM repo? I would appreciate any advice anybody can give me on how to proceed with this transition. Thank you in advance.

2 4

Re: [Dovecot] Fwd: converting from vm-pop3d
by Tim Uckun 09 Jun '10

09 Jun '10

>> I hate to be rude but I am going to bump my post. Does anybody have >> any advice on migrating from vm-pop3d? > > Which version of vm-pop3d you use ? > vm-pop3d POP3 Server Version 1.1.7f-DA-2

2 1

[Dovecot] dovecot 2.0b3 crash with lmtp and DNS based proxy
by Oliver Eales 09 Jun '10

09 Jun '10

Hello, i am trying to proxy a LMTP connection with version 2.0b3 Currently i have the problem when trying to use a named based proxy for LMTP the process doesn't resolve the hostname and crashes: Feb 26 16:53:26 auth: Debug: ldap(vodafonemail56@vodafone.de,::1): pass search: base=ou=mailboxes,ou=vfag,c=de,o=vodafone scope=subtree filter=(&(objectClass=uco)(mail=vodafonemail56(a)vodafone.de)) fields=userpassword,isactive,host Feb 26 16:53:26 auth: Debug: ldap(vodafonemail56@vodafone.de,::1): result: userpassword(password)=<hidden> proxy(proxy)=1 host(host)=kangaroo.arcor-so.net Feb 26 16:53:26 auth: Debug: master out: PASS 1 proxy host=kanagroo.arcor-so.net Feb 26 16:53:26 lmtp(17929): Debug: auth input: proxy host=kangaroo.arcor-so.net Feb 26 16:53:26 lmtp(17929): Error: lmtp client: kangaroo.arcor-so.net is not a valid IP Feb 26 16:53:30 lmtp(17929): Info: Disconnect from ::1: Client quit Feb 26 16:53:30 master: Error: service(lmtp): child 17929 killed with signal 11 (core dumped) Program terminated with signal 11, Segmentation fault. #0 0x00000000004081fe in lmtp_proxy_try_finish (proxy=0x633898) at lmtp-proxy.c:193 193 if (lmtp_proxy_send_data_replies(proxy) && (gdb) bt full #0 0x00000000004081fe in lmtp_proxy_try_finish (proxy=0x633898) at lmtp-proxy.c:193 No locals. #1 0x0000000000409bb3 in lmtp_client_deinit (_client=<value optimized out>) at lmtp-client.c:137 client = (struct lmtp_client *) 0x633db8 #2 0x00000000004089c8 in lmtp_proxy_deinit (_proxy=<value optimized out>) at lmtp-proxy.c:86 proxy = (struct lmtp_proxy *) 0x633898 #3 0x000000000040602e in client_destroy (client=0x6191c8, prefix=<value optimized out>, reason=<value optimized out>) at client.c:255 No locals. #4 0x00000000004067d3 in cmd_quit (client=0xb, args=<value optimized out>) at commands.c:407 No locals. #5 0x000000000040669b in client_input_handle (client=0x6191c8) at client.c:61 _data_stack_cur_id = 3 output = (struct ostream *) 0x619b80 line = 0x631461 "quit" ret = <value optimized out> #6 0x00007f3217c9b8db in io_loop_handler_run (ioloop=<value optimized out>) at ioloop-epoll.c:208 ctx = (struct ioloop_handler_context *) 0x6177b0 event = (const struct epoll_event *) 0x617820 list = (struct io_list *) 0x619c60 io = (struct io_file *) 0x619c20 tv = {tv_sec = 59, tv_usec = 976185} t_id = 2 msecs = <value optimized out> ret = 1 call = <value optimized out> #7 0x00007f3217c9aa48 in io_loop_run (ioloop=0x6175a0) at ioloop.c:350 No locals. #8 0x00007f3217c8ae03 in master_service_run (service=0x617480, callback=0x6) at master-service.c:478 No locals. #9 0x0000000000405b92 in main (argc=1, argv=0x617370) at main.c:92 ---Type <return> to continue, or q <return> to quit--- set_roots = {0x40bd00, 0x40b980, 0x0} service_flags = <value optimized out> storage_service_flags = 675 c = <value optimized out> (gdb) Regards, Oliver Eales

2 4

[Dovecot] Dovecot v2.0.beta5 (1b45f9641924): Auth Crashes
by Thomas Leuxner 08 Jun '10

08 Jun '10

Hi, not sure which change caused it, but one of the latest adds between those two snapshots breaks userdb lookup: Jun 1 21:53:30 spectre dovecot: master: Dovecot v2.0.beta5 (1b45f9641924) starting up Jun 1 21:53:30 spectre dovecot: master: Warning: Killed with signal 15 (by pid=6898 uid=0 […] Jun 1 21:53:40 spectre dovecot: master: Dovecot v2.0.beta5 (55b8480849b0) starting up Jun 1 21:53:40 spectre dovecot: master: Warning: Killed with signal 15 (by pid=8577 uid=0 code=kill) Jun 1 21:52:30 spectre postfix/lmtp[6787]: F151B408D: to=<tlx(a)leuxner.net>, relay=spectre.leuxner.net[private/dovecot-lmtp], delay=0.09, delays=0.06/0/0/0.04, dsn=4.3.0, status=deferred (host spectre.leuxner.net[private/dovecot-lmtp] said: 451 4.3.0 <tlx(a)leuxner.net> Internal error occurred. Refer to server log for more information. (in reply to RCPT TO command)) ==> /var/log/dovecot.log <== Jun 1 21:52:30 spectre dovecot: lmtp(6788): Connect from local Jun 1 21:52:30 spectre dovecot: master: Error: service(auth): child 6797 killed with signal 11 (core not dumped) Jun 1 21:52:30 spectre dovecot: lmtp(6788): Error: userdb lookup(tlx(a)leuxner.net): Disconnected unexpectedly Jun 1 21:52:30 spectre dovecot: master: Error: service(auth): command startup failed, throttling Jun 1 21:52:30 spectre dovecot: lmtp(6788): Disconnect from local: Client quit ==> /var/log/mail.log <== Jun 1 21:52:58 spectre postfix/qmgr[3246]: 5619A4086: from=<users-return-95390-lists=leuxner.net(a)httpd.apache.org>, size=6226, nrcpt=1 (queue active) ==> /var/log/dovecot.log <== Jun 1 21:52:58 spectre dovecot: lmtp(6788): Connect from local Reverting to changeset 55b8480849b0 restores functionality. Regards Thomas

3 10

[Dovecot] The driver said: (QUOTA) "Quota exceeded" (Ingo sieve filter in horde)
by Iced Fox 08 Jun '10

08 Jun '10

I have $conf['storage']['params']['driverconfig'] = 'horde'; $conf['storage']['driver'] = 'sql'; in /var/www/html/horde/ingo/config/conf.php I have 2,146 records for one of the users in ingo_lists table of horde DB. The size of the script (.dovecot.sieve file) is 99.965 bytes. When trying to activate script I get the following # Changes saved. # Error There was an error activating the script. The driver said: (QUOTA) "Quota exceeded" Please let me know where I can change that size of QUOTA

2 1

[Dovecot] Migration from Courier to Dovecot: is it recommended to "force" d.index* creation?
by Sandro Tosi 08 Jun '10

08 Jun '10

Hello, we are planning to migrate from Courier to Dovecot. We already know courier-dovecot-migrate.pl, that will convert UID list and subscriptions files to dovecot format, and we will run it in batch on all Maildir + enable it at login, once we do the switch But we are also wondering it it might be wise to "force" the creation of dovecot.index{,.cache} files at conversion-time. It seems that, at least, d.i.c is created at FETCH of a mail, i.e. reading it, but we do not want to "alter" mails status of our clients. Is there a way to create them in batch, or is it better to just let them be created once clients start accessing their mailboxes via dovecot? Thanks in advance, Sandro

2 1