- dovecot - dovecot.org

[Dovecot] Virtual POP3 Inbox question
by Josephus 20 Feb '10

20 Feb '10

Hi, I'm having trouble implementing the virtual pop3 inbox solution in Dovecot 1.2.x. As the following wiki page describes (http://wiki.dovecot.org/Plugins/Virtual) one should only set the inbox=yes flag for the virtual namespace which then flattens all mailboxes in the realmails/ prefix. In the above example when I set the inbox=yes flag for the virtual namespace, the inbox in the realmails/ prefix gets left out for obvious reasons. How did the original author intend this to work? Regards, Jos

2 2

[Dovecot] Dovecot design-question
by Werner 20 Feb '10

20 Feb '10

Hi everybody, we're currently in the process of drafting our new mailserver-setup. Instead of a single-server-setup we'd like to have two equal servers behind a loadbalancer like LVS and shared mailhomes on NFS. We'd like to use dovecot for POP/IMAP, dovecot-deliver as LDA. - It's probably the best idea to direct SMTP and POP/IMAP always to the same server behind the loadbalancer (because dovecot-deliver is used which updates indexes?) - If we think of a "active/passive" setup: dovecot index-files locally or on the nfs-share? - Is it possible to activate loadbalancing for SMTP in this environment if dovecot index-files are held locally on each machine (POP/IMAP is directed only to one of the two servers?) Any comments welcome :-) Werner

3 11

[Dovecot] exporting client socket to postfix
by zhong ming wu 20 Feb '10

20 Feb '10

Dear List, I have a few questions regarding dovecot sasl authentication that are somewhat related to each other. I have a working dovecot config with ---------- ssl_verify_client_cert = yes .. . ssl_require_client_cert = yes ssl_username_from_cert = yes --------------- (With this set up I need not set a correct user name in my mail client so long as I have it correctly in cert.) It turns out that I cannot export client socket to postfix to do smtp authentication unless I comment out ssl_require_client_cert=yes Does it mean that postfix is not passing to dovecot any information about certificate? Is passing certificate information not part of sasl framework? If so I won't be able to use it with a different sasl implementation. Also if I comment out ssl_require_client_cert=yes, then I can no longer use username from cert to log in to retrieve my pop mail. I prefer to get username this way otherwise my thunderbird mailbox reads user@domain.org@domain.org; I could have more than one domain in my dovecot servers. Thanks mr.wu

1 0

[Dovecot] passing parameters to deliver
by kjonca＠wp.pl 20 Feb '10

20 Feb '10

Is any posibility to pass parameters/environment variables to deliver with sieve plugin? I have some procmail rules to decide where mail should go, which can't be migrated to sieve (uses external programs). So far I write it to maildirs, but I wonder to migrate to mdbox, and procmail can't handle it. Any ideas? KJ -- http://modnebzdury.wordpress.com/2009/10/01/niewiarygodny-list-prof-majewsk… można nie mieć nawet żadnego sensownego argumentu, a dzięki odpowiedniej gestykulacji stworzyć poczucie wiarygodności. Puls Biznesu

5 6

[Dovecot] Feature request? Make deliver quota inclusive!
by Joachim Boltz 19 Feb '10

19 Feb '10

hi all, I'd like to make deliver put mail into a nearly full mailbox even when they become overquota as a result. The same problem came up a few weeks ago: http://dovecot.org/list/dovecot/2010-January/045695.html Since no solution was offered may I suggest this topic as an additional feature for future releases? ;-) This is a important for me because sometimes users are lazy. They think "oh, still 10% left, no reason to delete mail" while in the meantime large messages are already bounced, while some small ones arrive in the users inbox. cheers, achim

7 19

[Dovecot] Client behaviour with sieve
by Koenraad Lelong 19 Feb '10

19 Feb '10

Hi, I have a working dovecot imap-server, with sieve. I find it odd that my mail-clients (Thunderbird 2 and 3) don't report anything that's new in the folders. What I mean is this : Postfix get's a mail and hands it over to dovecot's LDA and sieve moves it to a folder. When I log in with Thunderbird, I see new messages in my Inbox. But that message that was moved to a folder is "invisible" until I click on the folder. Then Thunderbird sees there are new messages in that folder and reports the number of new messages and makes the foldername bold. Is this the expected behaviour ? Or did I configure something wrong ? Thanks for any clarification. Regards, Koenraad Lelong.

6 6

[Dovecot] wish now I'd not upgraded...
by Stan Hoeppner 19 Feb '10

19 Feb '10

Upgraded from Debian Dovecot 1.0.15 to Debian Dovecot 1.2.10-1~bpo50+1. I use Postfix local delivery to and Dovecot mbox. As per upgrade directions, I stopped dovecot processes and deleted all dovecot.index.cache files in /home/%user/mail/.imap. Performed upgrade to 1.2.10-1~bpo50+1. Modified new dovecot.conf for my environment. Started dovecot. Problem: Instantly noticed in TB 3.0.1 Win32 that all emails in all folders were marked as unread. Stopped TB, stopped dovecot, deleted *all* files in /home/%user/mail/imap/ so indexes and caches could be rebuilt from scratch. Started dovecot, started TB. Same problem. Then I got ugly, stopped TB and dovecot, deleted all ~.imap/ files *and* deleted *all* TB cache and index files with a time stamp of today. Restarted dovecot, restarted TB. Same damn problem. I sit hit right clicking folder after folder and selecting "mark as read", only to see all the emails in the folder go "read" and then within seconds go back to marked as unread (bold). Opening messages one at a time and moving to the next doesn't even keep them marked as read. WTF is going on? Why won't they stay marked as read? I've got over 25,000 emails in these folders and I get a few hundred list mails a day. I really need to get this read/unread business straightened out. What the heck am I missing? Is this a bug in the Debian backport? Good thing I have no hair or I'd have pulled half of it out by now... -- Stan

7 16

[Dovecot] quota plugin + setting in "protocol" or "lda"
by maximatt 19 Feb '10

19 Feb '10

hi... which are the diference to configure quota plugin when LDA is dovecot: these setting: protocol imap { : mail_plugins = quota imap_quota : } protocol pop3 { : mail_plugins = quota : } .vs. these setting: protocol lda { : mail_plugins = quota : } Note: - dovecot version is 1.2.0 thanks in advance!! -- Salu2 ;)

2 1

[Dovecot] quota problem
by Andre Hübner 19 Feb '10

19 Feb '10

dovecot 1.0.15 Hello, i try to set quota settings for my users. currentyl i use a mysql table for auth process and now i want to add quotasettings for each individual user. at the moment i have the problem that only global quota is effective and no userquota which is stored in usertable. This is my mysql-usertable: login varchar(255) password varchar(64) home varchar(128) uid int(11) gid int(11) quota_kb varchar(10) active char(1) In my main-dovecot.conf i have quota/imap_quota activated for pop/imap and protocol lda This is the auth-section which contains passdb/userdb auth default { mechanisms = plain login passdb sql { args = /etc/dovecot-sql.conf } userdb sql { args = /etc/dovecot-sql.conf } user = root socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } socket listen { client { path = /var/run/dovecot/auth-master mode = 0755 user = nobody } } } SQL-queries in /etc/dovecot-sql.conf (connection itselfs is ok, auth per mysql is working already) password_query = SELECT login as user, password, home as userdb_home, uid as userdb_uid, gid as userdb_gid FROM mail_users WHERE login = '%u' AND active='Y' user_query = SELECT login as user, home, uid, gid, concat('dirsize:storage=', quota_kb) AS quota FROM mail_users WHERE login = '%u' I think there is something missing in my conf but have no idea what it could be. I need a little hint please. Thanks, Andre

4 11

[Dovecot] auth processes
by Stan Hoeppner 19 Feb '10

19 Feb '10

With 1.0.15 my configuration I a single dovecot-auth process, which is what I want now. Since upgrading to 1.2.10 I have two such processes: root 16992 16990 0 Feb15 ? 00:00:00 dovecot-auth root 16997 16990 0 Feb15 ? 00:00:00 dovecot-auth -w I can't seem to tweak dovecot.conf to get this down to one auth process again. I've tried setting each of these below to 0, which resulted in either none, or one auth process. In the case of the one auth process, T-Bird wasn't working correctly, although it presented no pop up or other errors. When I'd click an IMAP folder it would just show whitespace and never pull up the emails. auth_worker_max_count = # Number of authentication processes to create count = This is an extremely low volume host, and I'm an efficiency freak. I don't like having "unnecessary" processes running if it is at all possible to avoid it. Given my IMAP user load, I know for a fact that I should only need one auth process, and for that matter, given my load, running all the dovecot processes from inetd is even a valid option, although I've not yet attempted that. Any ideas? Thanks. -- Stan

3 7

[Dovecot] dovecot and firstname.initial.lastname mbox format archive
by Wilko Bulte 19 Feb '10

19 Feb '10

hi Today I have been in a puzzling fight with 2 dovecot versions that I would like to ask some comments on. The situation is this: - I have a considerable mail archive in mbox format (yes, I know, but that is what I have..). - My mail reader is mutt 1.5.20 by the way. - Some of these mbox files have names like firstname.initial.lastname Note the . seperating the parts of the email-ers name. - On my old system I have dovecot v 1.1.7 which has always worked flawless - On my new system I have dovecot v 1.2.8 which refuses to handle these dot-seperated files. I get the somewhat familiar "Mailbox doesn't allow inferior mailboxes". On a not-previously-existing mbox dovecot 1.2.8 produces the directory hierarchy thing: firstname -> initial -> lastname - I am using the same dovecot.conf on v.1.1.7 and v.1.2.8 Can anyone tell me if v1.2.8 no longer is able to do what v1.1.7 did? And what I dearly would like to get working :-( And if it can, what should I put in dovecot.conf to make that happen? thanks, Wilko -- wilko(a)FreeBSD.org

2 8

[Dovecot] 2nd REPOST: mbox vs maildir
by Ashley M. Kirchner 18 Feb '10

18 Feb '10

I'm going to assume this is just not possible, or that no one has an answer, which would lead me back to uw-imap since it does work as-is. So I'll post it again, hoping that there is a solution for this setup and that folks have just been too busy to help think about it and/or help come up with a possible solution. ----- Ignoring my previous message just for a second, I realized that my config wasn't correct. First the layout: ~mail/ ~mail/Drafts ~mail/Ashley-Feb09 ~mail/Others-Feb09 ~mail-Archives/ ~mail-Archives/2009/ ~mail-Archives/2009/Ashley/ ~mail-Archives/2009/Ashley/Ashley-Dec09 ~mail-Archives/2009/Ashley/Ashley-Nov09 ~mail-Archives/2009/Ashley/Ashley-Oct09 So I (now) have this for namespaces: namespace private { separator = / prefix = "mail/" location = mbox:~/mail:INBOX=/var/mail/%u inbox = yes hidden = no list = yes # for v1.1+ } namespace private { separator = / prefix = "mail-Archives/" location = maildir:~/mail-Archives:LAYOUT=fs inbox = no hidden = no list = yes subscriptions = yes } But when I'm in Thunderbird and I try to subscribe to anything that falls inside of ~/mail-Archives/ it won't work. I can browser all the way down to the folder, but I can't see anything within that folder. For example, consider the full path to the following 'Ashley-Dec09' mailbox: ~mail-Archives/2009/Ashley/Ashley-Dec09 In Thunderbird, when I hit 'Subscribe' I can browse down to '2009' and I can see 'Ashley', but I can't drill down into it and subscribe to 'Ashley-Jan09'. What am I missing here?

3 13

[Dovecot] LDAP as password database - some problems / suggestions
by Stefan Palme 18 Feb '10

18 Feb '10

Hi all, Using dovecot-1.2.6, I use dovecot with an LDAP backend for user authentication. In general this works ok, but I have some issues with this... In LDAP, I have users like this: dn:cn=user1,ou=users,dc=kapott,dc=org dn:cn=user2,ou=users,dc=kapott,dc=org etc. When authenticating users, I explicitely want to use the AUTH_BIND feature (and NOT lookup passwords). My problem: not ALL users from the LDAP system should be allowed to use the IMAP server. Currently, I have defined an auth_bind_userdn of "cn=%u,ou=users,dc=kapott,dc=org" in dovecot-ldap.conf, but with this, user1 AND user2 could login (but I don't want user2 to be able to use dovecot). Because the LDAP system is used in a larger environment, it is NOT possible to re-arrange the users like this: cn=user1,ou=dovecot,ou=users,dc=kapott,dc=org cn=user2,ou=not_dovecot,ou=users,dc=kapott,dc=org So my question: are there any plans to support group-based LDAP authentication? For several other application, I have something like this: dn:cn=dovecot,ou=groups,dc=kapott,dc=org objectclass:groupOfNames member:cn=user1,ou=users,dc=kapott,dc=org So I can define groups of user accounts - one group per application. A nice solution for this in dovecot would be, if I could "mix" password lookup and authentication bind: First, a search query should be used to find a valid DN to bind as. In my case, the search query could look like this: base="ou=groups,dc=kapott.org" filter="(&(cn=dovecot)(member=cn=%u,ou=users,dc=kapott,dc=org))" result_attribute="member" After finding a DN this way (via attribute "member"), I want to use auth_bind to use this DN for password verification... Any hints how to solve this? Any plans to support this in the future? Thanks and regards -stefan-

4 7

[Dovecot] improved create dovecot certificate script
by Roger Oot 18 Feb '10

18 Feb '10

If anybody is interested, which they are probably not, here is an improved and more rigorous version of mkcert.sh #! /bin/sh #*****************************************************************************# #| #| file : /root/apps/share/sh/create_dovecot_certificate #| #*---------------------------------------------------------------------------*# BELL="\007" DOVECOT_DIR="${DOVECOT_DIR-/var/lib/dovecot}" OPENSSL="${OPENSSL-openssl}" OPENSSL_CONF="${OPENSSL_CONF-/etc/dovecot/dovecot-openssl.cnf}" #.............................................................................# certificates_dir="${DOVECOT_DIR}/certificates" echo="/bin/echo -e" error="${BELL}%ERROR -" #*---------------------------------------------------------------------------*# check_directory () { directory="${1}" #.............................................................................# if [ $ ! \( -d "${directory}" $ \) ] then mkdir -m 700 "${directory}" 2> /dev/null status=${?} if [ ${status} -ne 0 ] then ${echo} "${error} directory ${directory} cannot be created!" >&2 exit 2 fi chgrp dovecot "${directory}" fi #.............................................................................# return 0 } #*---------------------------------------------------------------------------*# check_executable () { executable="${1}" #.............................................................................# if [ $ ! \( -x "`which ${executable} 2> /dev/null`" $ \) ] then ${echo} "${error} executable ${executable} could not be found!" >&2 exit 1 fi #.............................................................................# return 0 } #*---------------------------------------------------------------------------*# check_exists () { file="${1}" description="${2}" #.............................................................................# if [ -e "${file}" ] then test "${description}" = "public certificate" && echo ${echo} \ "${error} ${description} file ${file} already exists!" >&2 test "${description}" = "public certificate" && \ show_certificate "${certificate}" exit 6 fi #.............................................................................# return 0 } #*---------------------------------------------------------------------------*# check_file () { file="${1}" description="${2}" #.............................................................................# if [ $ ! \( -e "${file}" $ \) ] then ${echo} "${error} ${description} file ${file} does not exist!" >&2 exit 3 fi if [ $ ! \( -f "${file}" $ \) ] then ${echo} "${error} ${description} ${file} is not a file!" >&2 exit 4 fi if [ $ ! \( -s "${file}" $ \) ] then ${echo} "${error} ${description} file ${file} is empty!" >&2 exit 5 fi #.............................................................................# return 0 } #*---------------------------------------------------------------------------*# create_certificate () { configuration="${1}" directory="${2}" #.............................................................................# name="`hostname -f | tr '[A-Z]' '[a-z]' | tr '.' '_'`-dovecot" certificate="${directory}/${name}.crt" check_exists "${certificate}" "public certificate" key="${directory}/${name}.pem" check_exists "${key}" "private key" #.............................................................................# ${echo} "\nCreating new X509 certificate\n\ with configuration ${configuration}\nfor ${name} ...\n" ${OPENSSL} req -new -x509 -nodes -config "${configuration}" \ -days 365 -out "${certificate}" -keyout "${key}" status=${?} if [ ${status} -ne 0 ] then ${echo} "${error} ${OPENSSL} failed with exit status ${status}!" >&2 exit 7 fi #.............................................................................# chmod 0400 "${key}" chmod 0444 "${certificate}" #.............................................................................# return 0 } #*---------------------------------------------------------------------------*# show_certificate () { certificate="${1}" #.............................................................................# echo ${OPENSSL} x509 -in "${certificate}" -noout -dates echo ${OPENSSL} x509 -in "${certificate}" -noout -serial echo ${OPENSSL} x509 -in "${certificate}" -noout -subject echo #.............................................................................# return 0 } #*---------------------------------------------------------------------------*# check_executable "${OPENSSL}" check_file "${OPENSSL_CONF}" "openssl configuration" check_directory "${DOVECOT_DIR}" check_directory "${certificates_dir}" create_certificate "${OPENSSL_CONF}" "${certificates_dir}" #.............................................................................# exit 0 #*****************************************************************************#

1 0

[Dovecot] dovecot-sieve and ldap user
by spamvoll＠googlemail.com 18 Feb '10

18 Feb '10

hi.. im running dovecor 1.2.10 and dovecot-sieve 0.1.15 protocol lda { .. mail_plugins = sieve } plugin { ... sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } cat .dovecot.sieve require "fileinto"; if header :contains "subject" ["VIRUS"] { fileinto "VIRUS"; } else { keep; } But mails dont get moved. I use the master.cf to get postfix to use deliver dovecot unix - n n - 10 pipe flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -d ${recipient} dovecot -n # 1.2.10: /etc/dovecot.conf # OS: Linux 2.6.18-164.10.1.el5 i686 CentOS release 5.4 (Final) protocols: imaps ssl: required login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/imap-login first_valid_uid: 10000 last_valid_uid: 10000 first_valid_gid: 10000 last_valid_gid: 10000 mail_uid: vmail mail_gid: vmail lda: postmaster_address: postmaster(a)example.com mail_plugins: sieve auth_socket_path: /var/run/dovecot/auth-master auth default: passdb: driver: ldap args: /etc/dovecot-ldap.conf userdb: driver: passwd userdb: driver: ldap args: /etc/dovecot-ldap.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: sieve: ~/.dovecot.sieve sieve_dir: ~/sieve Does the sieve plugin use the home_dir returned from the ldap ? And is it ok to use the deliver in master.cf and or do i have to set mailbox_command = /usr/lib/dovecot/deliver ?

2 1

[Dovecot] Disabling Keywords
by Tony Rutherford 18 Feb '10

18 Feb '10

Is there a correct way to tell the client we don't want, and don't support Keywords via a configuration option? If there's no configuration option, would I override "allow_new_keywords" to just return FALSE? Thanks, Tony

2 3

[Dovecot] Courier->Dovecot Migration Issue
by Tony Rutherford 18 Feb '10

18 Feb '10

For testing purposes, on a small set of users, we've run the courier-dovecot-migrate.pl script. We are converting from Courier 0.43 to Dovecot 1.2.9. For the most part, things seem to be ok. However, an iPhone IMAP client user is reporting a problem where some of her messages don't show up. Even stranger is the fact that these same messages do appear when using Outlook 2k7 for instance. The common denominator for when the messages are missing seems to be whether or not the message appeared in both the Courier IMAP and Courier POP3 uid files. The missing messages appear in the CourierIMAP file, but NOT the Courier POP file. Here is a snippet from the resulting Dovecot-uidlist file: 3 V1141844265 N12392 9338 P00cf2eb6_fadc_4992_ad3a_57cc83a16eab W5146 :00cf2eb6_fadc_4992_ad3a_57cc83a16eab:2,S 9788 P0b18a2d6_97dd_4712_a09c_23c7a3d59467 W4055 :0b18a2d6_97dd_4712_a09c_23c7a3d59467:2,S 9942 P0b3cfd0b_1fc7_47b3_805f_b369a3bb6c65 W4359 :0b3cfd0b_1fc7_47b3_805f_b369a3bb6c65:2,S 10100 Pe178f1ed_d648_47e8_807a_3e2d655d7f84 W12028 :e178f1ed_d648_47e8_807a_3e2d655d7f84:2,S 10101 Pe3f28a53_a4d4_4f3d_babe_5df72bc35b47 W13974 :e3f28a53_a4d4_4f3d_babe_5df72bc35b47:2,S 10102 Pf3c3024b_2850_43ef_a397_d5cae5c8f537 W7177 :f3c3024b_2850_43ef_a397_d5cae5c8f537:2,S 10104 P6e808a68_0a7b_4528_aa67_4cc16361c56b W10817 :6e808a68_0a7b_4528_aa67_4cc16361c56b:2,S 10105 P65c8218d_7b2a_43b7_82a4_2743025bd954 W3579 :65c8218d_7b2a_43b7_82a4_2743025bd954:2,S 10106 P963cc43e_0355_481e_99d5_5468708bc28f W6410 :963cc43e_0355_481e_99d5_5468708bc28f:2,S 10107 P1405aefc_b98b_4a35_a7dd_a69199f724d0 W4703 :1405aefc_b98b_4a35_a7dd_a69199f724d0:2,S 10108 P67908fad_ec0a_4786_b0f1_c7cfaa23d09a W127288 :67908fad_ec0a_4786_b0f1_c7cfaa23d09a:2,S 10109 :9176f3b2_1927_4657_baa8_bfe4c39e89d4:2,S 10110 :79047185_aef7_48ec_aff2_6b71bd566acd:2,S 10111 :efe275a0_a7a8_4f47_b638_45a18bc0b108:2,S The last three entries exist in the Courier IMAP file, but NOT the Courier POP file. The resulting dovecot-uidlist format is different, but to be honest, I haven't been able to find the exact specification for the format of the dovecot-uidlist file (if it exists). What is really strange to me is: If there was a problem with the migration script and resulting dovecot-uidlist file, why would these messages show up fine in some client (ex. Outlook) and not others (ex. iPhone). Regards, Tony

2 6

[Dovecot] Virtual mailboxes show up twice
by Matthijs Kooijman 18 Feb '10

18 Feb '10

Hi all, I've been struggling a bit getting Hastymail webmail to work with my virtual mailboxes. After a while, I discovered that my virtual mailboxes are listed twice: Once with \NoSelect and once without. See the following (partial) LIST reponse: * LIST (\Noselect \HasChildren) "/" "virtual" * LIST (\Noselect \HasNoChildren) "/" "virtual/foo" ... * LIST (\HasNoChildren) "/" "virtual/foo" This makes somewhat sense, since my "virtual" namespace is a subdir of my default namespace: mail_location = Maildir:~/Mail:LAYOUT=fs # Default namespace, uses mail_location above namespace private { prefix = separator = / inbox = yes } # Virtual mailboxes namespace private { prefix = virtual/ separator = / # Store virtual mailbox in a "virtual" subdirectory. We use the fs layout, # so nesting of mailboxes is done using normal filesystem nesting. location = virtual:~/Mail/virtual:LAYOUT=fs } Now, should dovecot handle this configuration transparently by hiding the virtual directory from the default namespace, or is this configuration just not supported and should the virtual directory be outside of ~/Mail? The current wiki documentation on the virtual plugin currently does suggest this configuration, its examples point to ~/Maildir/virtual. Gr. Matthijs

2 1

[Dovecot] configuring overquota message
by Leonardo Rodrigues 18 Feb '10

18 Feb '10

From dovecot 1.2.10 sources i have: src/plugins/quota/quota.c #define DEFAULT_QUOTA_EXCEEDED_MSG \ "Quota exceeded (mailbox for user is full)" struct quota_settings *quota_settings_init(void) { [ .... ] quota_set->quota_exceeded_msg = getenv("QUOTA_EXCEEDED_MESSAGE"); if (quota_set->quota_exceeded_msg == NULL) quota_set->quota_exceeded_msg = DEFAULT_QUOTA_EXCEEDED_MSG; [ .... ] but i havent found, in all the sources, where the QUOTA_EXCEEDED_MESSAGE is feeded by something from dovecot.conf or anywhere else. question is: isnt it possible to configure the quota exceeded message from dovecot.conf ?? Do i really need to rebuild dovecot changing the message on quota.c for acchieving that ? -- Atenciosamente / Sincerily, Leonardo Rodrigues Solutti Tecnologia http://www.solutti.com.br Minha armadilha de SPAM, NÃO mandem email gertrudes(a)solutti.com.br My SPAMTRAP, do not email it

2 2

[Dovecot] Get some headers Variables
by Alex Baule 18 Feb '10

18 Feb '10

Hello Everyone again !! I'm putting more functions in my plugin, and would need to access a value of one variable that is going to put in the header, how can I get this value by dovecot? example, I have the header: X-ThereisMy: yes How can I get this value inside a plugin ? There is something like getHeaderVar("X-ThereisMy") ?

2 1

[Dovecot] How to configure Lazyexpunge plugin?
by CoolAtt NNA 18 Feb '10

18 Feb '10

Hi, I tried the plugin but it is not working. Am using virtual mailboxes. I added the following in dovecot.conf then restarted dovecot. Please guide me to the correct configuration. ############################## namespace private { prefix = separator = / inbox = yes } # namespace for lazy_expunge plugin: namespace private { prefix = .EXPUNGED/ separator = / location = maildir:~/Maildir/expunged } protocol imap { mail_plugins = lazy_expunge } plugin { lazy_expunge = .EXPUNGED/ }################################# _________________________________________________________________ Hotmail: Powerful Free email with security by Microsoft. https://signup.live.com/signup.aspx?id=60969

2 1

[Dovecot] 1.2 , mail_location & mbox_snarf
by Laurent Moineau 18 Feb '10

18 Feb '10

Hello, I'm currently running 1.1.20 and I'm planning to upgrade to 1.2.10 I've read carefully the wiki page "Upgrading Dovecot v1.1 to v1.2" and a few messages concerning mail_location parameter but I still don't know what to change in my configuration in order to keep it working after the upgrade. I'm using mbox format and mbox_snarf plugin. dovecot -n : protocols: imaps pop3 pop3s listen: * ssl_cert_file: /etc/pki/tls/certs/ipop3d.pem ssl_key_file: /etc/pki/tls/certs/ipop3d.pem login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_privileged_group: mail mail_gid: 12 mail_location: mbox:~/mail:INBOX=/var/spool/mail/%u mbox_lazy_writes: no mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): mbox_snarf mail_plugins(imap): mbox_snarf mail_plugins(pop3): mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 lda: postmaster_address: postmaster(a)example.com auth default: debug: yes passdb: driver: pam userdb: driver: passwd plugin: mbox_snarf: %h/mail/INBOX Any help would be appreciated. Thanx. Laurent Moineau

2 1

[Dovecot] Problem in sharing mailboxes across users
by Rampage 18 Feb '10

18 Feb '10

Hello everyone, I'm trying to configure dovecot to allow users to share their imap folders. I've followed the wiki and i'm near to accomplish my tasks, when i set ACL properly on folders using imap commands the other user can see the folder as shared, but i can't subscribe to it or even access its content using any email client (like thunderbird) couse it looks like the path to the shared folder is not complete. i mean when i go to "manage subscriptions" i can see the shared folder from the other users as "shared/user@domain/sharedfoldername" but since only "sharedfoldername" is present i cant subscribe to it. am i missing somethimg? like do i need to setup a particular directory tree on the filesystem? thnx in advice for your help. Best regards. Francesco.

2 8

[Dovecot] Problem with allow_nets passdb parameter and Postfix
by Неворотин Вадим 18 Feb '10

18 Feb '10

I use Dovecot for SASL authentication from Postfix. In Postfix main.cf I have: smtpd_sasl_type = dovecot It works good, but now I need to allow users to connect by IMAP only from given IP adresses. I've added extra field allow_nets to passdb in Dovecot, and IMAP authentication works fine. But now I can't connect to my SMTP server because when smtpd ask dovecot about user authentification, dovecot always denied it. Even if I try to connect to SMTP from correct IP, listed in allow_nets for user. In dovecot log I have messages about incorrect ip like this: dovecot: 2010-02-15 13:28:51 Info: auth(default): passwd-file(malamut): lookup: user=malamut file=/etc/dovecot/temp.users dovecot: 2010-02-15 13:28:51 Info: auth(default): passdb(malamut): allow_nets check failed: Remote IP not known dovecot: 2010-02-15 13:28:53 Info: auth(default): client out: FAIL 7 user=malamut Problem is clear: smtpd don't send client IP to dovecot authentication socket. But I need to limit the ability of connection to users only from specific IP. Both for SMTP and IMAP. How can I do that? I use dovecot 1.0.15 and Postfix 2.5.5 on Debian Lenny.

2 3

[Dovecot] deliver problem ( Error: file_dotlock_create )
by Frank Bonnet 18 Feb '10

18 Feb '10

Hello all ( Postfix and Dovecot ) Trying to use deliver as mailbox_command with Postfix I get this error each time an email is arriving deliver(xxxxxxxx): Error: file_dotlock_create(/var/mail/xxxxxxxx) failed: Permission denied (euid=3003(xxxxxxxx) egid=3010(smig) missing +w perm: /var/mail) (set mail_privileged_group=mail) Doea this means I have to chmod 777 the /var/mail directory ? Thanks a lot

2 1

[Dovecot] dovecot v1.2.10 + unknown mail_uid parameter
by maximatt 18 Feb '10

18 Feb '10

hi... i upgrading dovecot from v1.0.7 to v1.2.10, so i perform some modifications (http://wiki.dovecot.org/Upgrading/1.1 and http://wiki.dovecot.org/Upgrading/1.2) but i have the following problem when i want to test installation: in dovecot.conf, i set the user mail: mail_uid= 72940 mail_gid= 72941 but when i try to start dovecot i have the following error: # sbin/dovecot Error: Error in configuration file /etc/dovecot/etc/dovecot.conf line 962: Unknown setting: mail_uid Fatal: Invalid configuration in /etc/dovecot/etc/dovecot.conf # sbin/dovecot --version 1.2.10 i try, but i dont know how to fix them :( thanks in advance! :) -- Salu2 ;)

2 1

[Dovecot] quick question
by David Halik 18 Feb '10

18 Feb '10

Timo (and anyone else who feels like chiming in), I was just wondering if you'd be able to tell me if the amount of corruption I see on a daily basis is what you consider "average" for our current setup and traffic. Now that we are no longer experiencing any core dumps with the latest patches since our migration from courier two months ago, I'd like to know what is expected as operational norms. Prior to this we had never used Dovecot, so I have nothing to go on. Our physical setup is 10 Centos 5.4 x86_64 IMAP/POP servers, all with the same NFS backend where the index, control, and Maildir's for the users reside. Accessing this are direct connections from clients, plus multiple squirrelmail webservers, and pine users, all at the same time with layer4 switch connection load balancing. Each server has an average of about 400 connections, for a total of around concurrent 4000 during a normal business day. This is out of a possible user population of about 15,000. All our dovecot servers syslog to one machine, and on average I see about 50-75 instances of file corruption per day. I'm not counting each line, since some instances of corruption generate a log message for each uid that's wrong. This is just me counting "user A was corrupted once at 10:00, user B was corrupted at 10:25" for example. Examples of the corruption are as follows: ########### Corrupted transaction log file ..../dovecot/.INBOX/dovecot.index.log seq 28: Invalid transaction log size (32692 vs 32800): ...../dovecot/.INBOX/dovecot.index.log (sync_offset=32692) Corrupted index cache file ...../dovecot/.Sent Messages/dovecot.index.cache: Corrupted physical size for uid=624: 0 != 53490263 Corrupted transaction log file ..../dovecot/.INBOX/dovecot.index.log seq 66: Unexpected garbage at EOF (sync_offset=21608) Corrupted transaction log file ...../dovecot/.Trash.RFA/dovecot.index.log seq 2: indexid changed 1264098644 -> 1264098664 (sync_offset=0) Corrupted index cache file ...../dovecot/.INBOX/dovecot.index.cache: invalid record size Corrupted index cache file ...../dovecot/.INBOX/dovecot.index.cache: field index too large (33 >= 19) Corrupted transaction log file ..../dovecot/.INBOX/dovecot.index.log seq 40: record size too small (type=0x0, offset=5788, size=0) (sync_offset=5812) ########## These are most of the unique messages I could find, although the majority are the same as the first two I posted. So, my question, is this normal for a setup such as ours? I've been arguing with my boss over this since the switch. My opinion is that with a setup such as ours where a user can be logged in using Thunderbird, Squirrelmail, and their Blackberry all concurrently at the same time, there will always be the occasional index/log corruption. Unfortunately, he is of the opinion that there should rarely be any and there is a design flaw in how Dovecot is designed to work with multiple services with an NFS backend. What has been your experience so far? Thanks, -Dave -- ================================ David Halik System Administrator OIT-CSS Rutgers University dhalik(a)jla.rutgers.edu ================================

7 44

[Dovecot] Anyone successfully setup Continous Backup of mailboxes using rsync ?
by CoolAtt NNA 18 Feb '10

18 Feb '10

Hi All.. Am working on continous backup of mailboxes using rsync(for e.g by running rsync every 2 min) Things gets more complicated when users create Subfolders in INBOX , SENT , etc.. If anyone among you did that plz guide & advise. Thanks CoolAtt _________________________________________________________________ Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. https://signup.live.com/signup.aspx?id=60969

17 41

[Dovecot] dovecot-sieve vacation vs qmail-ldap
by Lazy 18 Feb '10

18 Feb '10

Helloo, We are using dovectot lda with qmail-ldap, dovecot 1.2.10, sieve 0.1.15 lda is executed as exec /var/qmail/bin/preline -f /usr/local/dovecot/libexec/dovecot/deliver -s preline adds Delivered-To: header, everything works fine except vacation Feb 9 16:07:16 thebe dovecot: deliver(lazy): sieve: msgid=unspecified: discarding vacation response for message implicitly delivered to <lazy(a)thebe.org> Feb 9 16:07:16 thebe dovecot: deliver(lazy): sieve: msgid=unspecified: stored mail into mailbox 'INBOX' thebe.org is the hostname of the machine, oryginal recipient address has other domain .dovecot.sieve file looks like this require ["vacation"]; #autoresponder vacation :days 1 :subject "Auto Reply / Odpowiedz automatyczna" "aaaaaaaaaaaaaaaaaaaaa"; I did experiments with :addresses ["*"] without any luck. deliver only gets user and HOME directory form env variables provided by qmail, so it's unaware of the target email address. How to fix it ? I was thinking about deliver extracting target address from Delivered-To: header added by qmail's preline, or use DTLINE env variable, whitch qmail populates with Delivered-To header.

2 2

[Dovecot] Dovecot 1.2.8 problem on AIX
by Jonathan Siegle 18 Feb '10

18 Feb '10

Running revision 9492:3efdbaab2960(Mon Nov 23) on AIX 5.3. I run dovecot out of inetd. Every once in a while I get the following error: Dovecot is already running with PID 2592842 (read from /usr/ladmin/dovecot-1.2.8/var/run/dovecot/master.pid) when I try to connect to the imap port. -Jonathan

3 2

[Dovecot] using signed certificates for TLS/SSL
by Leonardo Rodrigues 18 Feb '10

18 Feb '10

Hi, I have, in one customer, a web server running on a Verisign-signed certificate SSL certificate. Everything works fine, IE and Firefox connects on https without asking anything, which usually happens on self-signed certificates. I'm trying to use that certificate on dovecot, but clients (Thunderbird basically) keeps saying the certificate is not valid. yes i'm using, when configuring Thunderbird, the same CN that was signed by Verisign for the web usage i've enabled verbose_ssl and got when thunderbird tries to connect: Feb 18 12:32:02 correio dovecot: imap-login: Disconnected (no auth attempts): rip=201.86.xxx.xxx, lip=192.168.1.2, TLS handshaking: SSL_accept() failed: error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca unknown CA ??? is that Thunderbird that is not recognizing the Verisign-signed certificate ? Do i need to, somehow, install some Verisign CA certificate in dovecot.conf ? when using a self-signed certificate, i also get an SSL_accept failed, but with different message: Feb 18 12:41:45 correio dovecot: imap-login: Disconnected (no auth attempts): rip=201.86.191.114, lip=192.168.1.2, TLS handshaking: SSL_accept() failed: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate despite the fact my certificates were generated for use with Apache, i can 'print' them, both of them, with the same commands i use to print dovecot generated certificates, with mkcert.sh. So, it seems they are compatible. if i click OK on Thunderbird, when using my Verisign-signed certificates, everything works and i do got TLS logs: Feb 18 12:23:36 correio dovecot: imap-login: Login: user=<user(a)domain.com.br>, method=PLAIN, rip=201.86.xx.xx, lip=192.168.1.2, TLS, TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits) Feb 18 12:31:43 correio dovecot: imap-login: Login: user=<user(a)domain.com.br>, method=PLAIN, rip=201.86.xx.xx, lip=192.168.1.2, TLS, TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits) what am i doing wrong ?? or using a signed-certificate for WEB usage is not possible on dovecot ? -- Atenciosamente / Sincerily, Leonardo Rodrigues Solutti Tecnologia http://www.solutti.com.br Minha armadilha de SPAM, NÃO mandem email gertrudes(a)solutti.com.br My SPAMTRAP, do not email it

3 3

[Dovecot] revision control on maildir possible?
by Markus Beyer 18 Feb '10

18 Feb '10

Hi, I was wondering if it is possible to put a dovecot managed maildir under a vcs like system, for example git or bzr. I'd like to have a seamless history of all mail going in and out of my mailboxes, so a vcs like system seams a good choice for me. I'm not quite sure however if that would cause any problems to dovecot and what the best way of handling commits would be. If anyone on the list got any pointers regarding this, it would be much apprechiated. Best regards, Markus -- Sicherer, schneller und einfacher. Die aktuellen Internet-Browser - jetzt kostenlos herunterladen! http://portal.gmx.net/de/go/atbrowser

3 2

[Dovecot] tls not working on ubuntu
by zhong ming wu 18 Feb '10

18 Feb '10

Hello List, I'm new to dovecot. I have sucessfully configured dovecot with just virtual users on a centos linux box to my satisfaction; I can connect with TLS with disable_plaintext_auth = yes. This dovecot is also version > 1. Can't post exact version right now but it's what comes with Centos 5.4. On a Ubuntu 9.10 box here, I cannot connect with TLS (port 110) but I can connect with plain SSL (port 995). The config files between centos and ubuntu boxes are the same except for minor details. The following is the log entry Feb 17 21:38:18 ubuntu dovecot: pop3-login: Disconnected (no auth attempts): rip=192.168.0.101, lip=192.168.0.108 The output below is from a binary compiled from source. I have also tested with 1.1.11 (that I get from apt-get install) with the same config file. I have tested ubuntu with both Thunderbird 3 and thunderbird 2. I have also searched google as well as dovecot website. Thanks mr.wu # 1.2.10: /usr/local/etc/dovecot.conf # OS: Linux 2.6.31-14-server x86_64 Ubuntu 9.10 ext4 base_dir: /var/run/dovecot/ protocols: pop3 pop3s listen: 192.168.0.108 ssl_cert_file: /usr/local/etc/pop.crt ssl_key_file: /usr/local/etc/pop.key ssl_parameters_regenerate: 29 disable_plaintext_auth: no verbose_ssl: yes login_dir: /var/run/dovecot//login login_executable: /usr/local/libexec/dovecot/pop3-login mail_location: maildir:/var/vmail/%d/%n mail_executable: /usr/local/libexec/dovecot/pop3 mail_plugin_dir: /usr/local/lib/dovecot/pop3 auth default: user: authdove debug: yes passdb: driver: passwd-file args: /usr/local/etc/%d/passwd userdb: driver: static args: uid=2000 gid=2000 home=/var/vmail/%d/%n

2 1

[Dovecot] Sieve libexec /usr/lib/dovecot/deliver
by Filip Dvořák 17 Feb '10

17 Feb '10

Hi, I have installed dovecot(1.2.10) with --libexecdir=/usr/lib . Dovecot sieve(0.1.15) is compiled with --with-dovecot but still uses /usr/libexec/dovecot/deliver instead of /usr/lib/dovecot/deliver. How should be dovecot sieve configured to use /usr/lib/dovecot/deliver thanks in advance Filip # dovecot configuration: ./configure --prefix=/usr --sysconfdir=/etc/dovecot --localstatedir=/var \ --libexecdir=/usr/lib --with-moduledir=/usr/lib/dovecot/modules \ --with-db --with-mysql --with-pgsql --with-sqlite \ --with-ssl=openssl --with-ssldir=/etc/dovecot/ssl \ --with-gssapi --with-ldap=plugin --enable-header-install --with-docs # dovecot sieve configuration: ./configure --prefix=/usr --with-dovecot=/usr/lib/dovecot # /usr/lib/dovecot/dovecot-config: CFLAGS="-std=gnu99 -march=i686 -mtune=generic -O2 -pipe -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 " LIBS=" -lrt" SSL_LIBS="-lssl -lcrypto -ldl -lz " STORAGE_LIBS="$(top_builddir)/src/lib-storage/register/libstorage-register.a $(top_builddir)/src/lib-storage/list/libstorage_list.a $(top_builddir)/src/lib-storage/index/cydir/libstorage_cydir.a $(top_builddir)/src/lib-storage/index/dbox/libstorage_dbox.a $(top_builddir)/src/lib-storage/index/maildir/libstorage_maildir.a $(top_builddir)/src/lib-storage/index/mbox/libstorage_mbox.a $(top_builddir)/src/lib-storage/index/raw/libstorage_raw.a $(top_builddir)/src/lib-storage/index/shared/libstorage_shared.a $(top_builddir)/src/lib-storage/index/libstorage_index.a $(top_builddir)/src/lib-storage/libstorage.a $(top_builddir)/src/lib-index/libindex.a $(top_builddir)/src/lib-imap/libimap.a $(top_builddir)/src/lib-mail/libmail.a $(top_builddir)/src/lib-auth/libauth.a $(top_builddir)/src/lib-charset/libcharset.a $(top_builddir)/src/lib/liblib.a" LIBICONV="" MODULE_LIBS="-export-dynamic -ldl" dovecot_incdir=/usr/include/dovecot moduledir=/usr/lib/dovecot/modules CFLAGS="-std=gnu99 -march=i686 -mtune=generic -O2 -pipe -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscri LIBS=" -lrt" SSL_LIBS="-lssl -lcrypto -ldl -lz " STORAGE_LIBS="$(top_builddir)/src/lib-storage/register/libstorage-register.a $(top_builddir)/src/lib-storage/list/libstorage_list.a $(top_ LIBICONV="" MODULE_LIBS="-export-dynamic -ldl" dovecot_incdir=/usr/include/dovecot moduledir=/usr/lib/dovecot/modules # end of dovecot-config dovecot -n output: # 1.2.10: /etc/dovecot/dovecot.conf # OS: Linux 2.6.27-lts i686 ext3 protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/mail.pruda.com/cert.pem ssl_key_file: /etc/ssl/mail.pruda.com/key.pem disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_location: maildir:/home/vmail/%u mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 lda: postmaster_address: postmaster(a)pruda.com mail_plugins: sieve sieve_global_path: /home/vmail/dovecot-global.sieve sendmail_path: /usr/sbin/sendmail auth default: user: nobody passdb: driver: sql args: /etc/dovecot/dovecot-mysql.conf userdb: driver: sql args: /etc/dovecot/dovecot-mysql.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: vmail plugin: sieve: /home/vmail/%u/dovecot.sieve home: /home/vmail/%u

1 1

[Dovecot] Special user
by Daniel L. Miller 17 Feb '10

17 Feb '10

Not sure what to call this - I'm actually working out the details as I type this. I want to have a valid username/password for an account for sending purposes - but when receiving this is an alias that broadcasts to several users. Example: accountspayable(a)mydomain.com - is an alias for jane(a)mydomain.com, june(a)mydomain.com, and john(a)mydomain.com. However - any mails sent (from a particular client software) should all only show "accountspayable" as the sender. How would I implement this? I'm asking here because Dovecot serves as the authentication mechanism for my SMTP server (Postfix) via LDAP lookups. -- Daniel

4 4

[Dovecot] salted passwords
by Leonardo Rodrigues 17 Feb '10

17 Feb '10

The idea of salted hash algorithms is to generate a different hash even if the same text is entered. That can be easily seen with dovecotpw: using NON-salted SHA256, same hash is generated for a given password [root@correio ~]# dovecotpw -s SHA256 -p 123 {SHA256}pmWkWSBCL51Bfkhn79xPuKBKHz//H6B+mY6G9/eieuM= [root@correio ~]# dovecotpw -s SHA256 -p 123 {SHA256}pmWkWSBCL51Bfkhn79xPuKBKHz//H6B+mY6G9/eieuM= [root@correio ~]# dovecotpw -s SHA256 -p 123 {SHA256}pmWkWSBCL51Bfkhn79xPuKBKHz//H6B+mY6G9/eieuM= [root@correio ~]# using SALTED SHA256, a different hash is generated for the same given password [root@correio ~]# dovecotpw -s SSHA256 -p 123 {SSHA256}FpJZqafpEVKp2heepp9Z7+OeHaX+DBVpLzd6GKg3BW1XqDS0 [root@correio ~]# dovecotpw -s SSHA256 -p 123 {SSHA256}6lWmvtO3SKG5RMET5n89WMIp0xeCg3U14xH1xnAXbvkr8Yjk [root@correio ~]# dovecotpw -s SSHA256 -p 123 {SSHA256}7fXVjC7Iiu0Ko9SgyBpbDvbwMSkoxMILRjDUE0nNpCHBFaIa [root@correio ~]# This ideia is OK to me ... but i'm having a hard time trying to figure out how my dovecot-sql.conf would be in the case i store salted SHA256 passwords on the database. The idea is to use a RANDOM salt, not a fixed one, just like dovecotpw does. would it be as simple as changing the 'password', which today is plaintext, by something like concat('{SHA256}',password) ??? dont i have to give the salt, somehow ?? Or should i store the salt used in the password, for example first or last N characters .... is there anyone using dovecot with MySQL and SSHA256 passwords that can share me the dovecot-sql.conf file ? -- Atenciosamente / Sincerily, Leonardo Rodrigues Solutti Tecnologia http://www.solutti.com.br Minha armadilha de SPAM, NÃO mandem email gertrudes(a)solutti.com.br My SPAMTRAP, do not email it

5 6

[Dovecot] zlib plugin trouble
by Stéphane Cottin 16 Feb '10

16 Feb '10

Hi, I have error with dovecot 1.2.10 + compress on deliver patch and zlib plugin. logfile sample: [...] mail.err: Feb 16 14:22:25 dovecot: IMAP(hidden(a)domain.com): zlib_istream.seek() failed: Invalid argument mail.err: Feb 16 14:22:25 dovecot: IMAP(hidden(a)domain.com): FETCH for mailbox Meursault UID 101 failed to read message input: Invalid argument mail.err: Feb 16 14:22:26 dovecot: IMAP(hidden(a)domain.com): gzread() failed: DATA_ERROR_MAGIC mail.err: Feb 16 14:22:26 dovecot: IMAP(hidden(a)domain.com): zlib_istream.seek() failed: Invalid argument mail.err: Feb 16 14:22:26 dovecot: IMAP(hidden(a)domain.com): FETCH for mailbox Meursault UID 101 failed to read message input: Invalid argument mail.err: Feb 16 14:22:26 dovecot: IMAP(hidden(a)domain.com): gzread() failed: DATA_ERROR_MAGIC [...] mail.err: Feb 16 14:36:24 dovecot: IMAP(hidden2(a)domain.com): gzread() failed: UNEXPECTED_EOF mail.err: Feb 16 14:36:24 dovecot: IMAP(hidden2(a)domain.com): FETCH for mailbox Sent.MARKETING.DAG ALLEMAAL UID 1 failed to read message input: Invalid argument mail.err: Feb 16 14:59:18 dovecot: IMAP(hidden2(a)domain.com): gzread() failed: UNEXPECTED_EOF [...] mail.info: Feb 16 14:08:35 dovecot: IMAP(hidden2(a)domain.com): Disconnected: BUG: Unknown internal error bytes=1099335/4103 mail.info: Feb 16 14:16:40 dovecot: IMAP(hidden(a)domain.com): Disconnected: BUG: Unknown internal error bytes=15193/2552616 mail.info: Feb 16 14:16:41 dovecot: IMAP(hidden(a)domain.com): Disconnected: BUG: Unknown internal error bytes=295/6715 mail.info: Feb 16 14:16:41 dovecot: IMAP(hidden(a)domain.com): Disconnected: BUG: Unknown internal error bytes=295/6715 mail.info: Feb 16 14:16:42 dovecot: IMAP(hidden(a)domain.com): Disconnected: BUG: Unknown internal error bytes=295/6715 mail.info: Feb 16 14:16:42 dovecot: IMAP(hidden(a)domain.com): Disconnected: BUG: Unknown internal error bytes=295/6715 [...] dovecot -n : # 1.2.10: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-6-xen-vserver-amd64 x86_64 Debian 5.0.4 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s managesieve login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login login_greeting: Dovecot ready. login_process_per_connection: no mail_max_userip_connections(default): 30 mail_max_userip_connections(imap): 30 mail_max_userip_connections(pop3): 10 mail_max_userip_connections(managesieve): 10 mail_privileged_group: mail maildir_copy_preserve_filename: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): zlib antispam quota imap_quota fts fts_squat mail_plugins(imap): zlib antispam quota imap_quota fts fts_squat mail_plugins(pop3): zlib quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve lda: postmaster_address: hidden(a)noc.com mail_plugins: autocreate quota sieve fts fts_squat zlib quota_full_tempfail: yes sieve_global_dir: /etc/dovecot/sieve/ auth default: mechanisms: plain login cram-md5 cache_size: 1024 passdb: driver: vpopmail userdb: driver: vpopmail socket: type: listen master: path: /var/run/dovecot/auth-master mode: 438 group: vchkpw plugin: quota: maildir:User quota quota_rule: Trash:ignore quota_rule2: Junk:ignore quota_rule3: &AMk-l&AOk-ments supprim&AOk-s:ignore quota_rule4: Deleted Items:ignore quota_rule5: Deleted Messages:ignore quota_warning: storage=95%% /usr/local/bin/quota-warning.sh 95 quota_warning2: storage=80%% /usr/local/bin/quota-warning.sh 80 antispam_signature: X-DSPAM-Signature antispam_signature_missing: error antispam_trash: trash;Trash;Deleted Items;Deleted Messages;&AMk-l&AOk-ments supprim&AOk-s antispam_spam: Junk antispam_dspam_args: --mode=teft;;--user;%u fts: squat fts_squat: partial=4 full=10 sieve: ~/.dovecot.sieve sieve_storage: ~/sieve zlib_save_level: 9 zlib_save: gz

3 7

Re: [Dovecot] Dovecot+Postfix+Maildir with ActiveDirectory userbase
by Wayne Thursby 16 Feb '10

16 Feb '10

> Wayne Thursby put forth on 2/15/2010 10:24 AM: > > > My Setup: > > Postfix and Dovecot running on the same virtual machine on a Dell 2950 > > with 1x Xeon E5440 on ESXi 4. Maildirs served up by 10x146GB SCSI drives > > on RAID-10 via direct attached Dell MD-1000. > > Interesting setup Wayne. > The same ESXi/RAID combo are also running several other VMs using 7 of its 8GB of RAM. > > Serving 600+ users, mailbox sizes up to 14GiB with constant heavy > > searching (no fts yet) and filtering (sieve and IMAP clients). 80,000 > > messages delivered per week, 95,000 messages rejected, 17,000 spam. 15 > > minute Load average stays under .50 all day with 4 CPU cores. > > How many CPUs are listed in /proc/cpuinfo under that Ubuntu VM? ESX by > default only exposes one CPU(core) to a VM guest OS. Any chance you didn't > tweak the VM config and that your Ubuntu guest is only running on time slices > of a single core? Your results are even more impressive if that's the case. Sorry if it's less impressive, but I've certainly configured the VM for 4 cores. The cores are shared equally between all VMs, I've done no prioritization because I've not had any performance issues related to resource contention. Having 10x15k RPM spindles to seek across, and 512MB of cache on the controller, means I can give Postfix/Amavis/Dovecot 3GB of RAM to use, and 1GB of it is always used for cache, without ever dipping into swap. I get occasional spikes to 30ms of disk latency, but it stays below 5ms for most of the workday. > Also, are you seeing the classic system clock drift of ESX guests, > and if so, is it causing problems with smtp and imap? Not at all, that's what the VMware tools are for. The ESXi host is configured to use our NTP server inside the VPN, and the VMware tools package synchronizes the guest clock with the host. I ran into this on our webmail client as well, then I discovered how easy it really is to install the VMware tools on Ubuntu, so it's no longer a problem. Don't want to stray off topic, so I'll start a new thread, but I'm now attempting to bring High Availability to the mix, and could use some suggestions. -- Wayne Thursby System Administrator Physicians Group, LLC

1 0

[Dovecot] sieve addflag has stopped working
by Andrew Schulman 16 Feb '10

16 Feb '10

Dovecot 1.2.10 in Debian, using Dovecot sieve. I have a sieve script, generated by Ingo, that's supposed to mark spam messages as "Seen" and file them into the Junk folder. In part it reads: require ["regex", "body", "imapflags", "fileinto"]; if exists "X-Spam-Flag" { addflag "\\Seen"; fileinto "Junk"; removeflag "\\Seen"; stop; } This has been working correctly for a long time, but since about 2 weeks ago now, the "Seen" flag isn't being set, although the messages are still being filed into the Junk folder. In two different mail clients, new messages in the Junk folder show up as being unread. Looking at the mail files that hold those messages, the file names don't have an "S" flag appended, while older messages all have the "S" and show up as already seen in the mail clients. I don't believe that I've updated dovecot recently, so I'm not sure why the behavior has changed. Note that I do have plugin { sieve_extensions = +imapflags } in dovecot.conf. I know that imapflags is deprecated, but it is still supposed to be supported. Unfortunately ingo1 doesn't support imap4flags yet (http://bugs.horde.org/ticket/8784) I'm trying to find log information that might indicate an error, but I'm not finding much. /var/log/exim4/mainlog just says: 2010-02-15 14:22:14 1Nh6WK-000200-8z <xxx(a)xxx.xxx>: deliver_pipe transport output: deliver(andrex): Info: sieve: msgid=<ad58db2a42700ec0e5c924c8882d48c2(a)yourmailnews.net>: stored mail into mailbox 'Junk' The wiki says that there should be a log file ~/.dovecot.sieve.log, but there isn't one, which I guess means there are no error messages. Output of dovecot -a is below. Any ideas why the Seen flag isn't being set any more? Thanks, Andrew. # dovecot -a # 1.2.10: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26 x86_64 Debian squeeze/sid base_dir: /var/run/dovecot log_path: info_log_path: log_timestamp: %Y-%m-%d %H:%M:%S syslog_facility: mail protocols: imap imaps managesieve listen(default): localhost listen(imap): localhost listen(managesieve): localhost:2000 ssl_listen: imap ssl: yes ssl_ca_file: ssl_cert_file: /etc/dovecot/helium-imaps.cert.pem ssl_key_file: /etc/dovecot/helium-imaps.key.pem ssl_key_password: ssl_parameters_regenerate: 0 ssl_cipher_list: ssl_cert_username_field: commonName ssl_verify_client_cert: no disable_plaintext_auth: yes verbose_ssl: no shutdown_clients: yes nfs_check: yes version_ignore: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login login_user: dovecot login_greeting: Dovecot ready. login_log_format_elements: user=<%u> method=%m rip=%r lip=%l %c login_log_format: %$: %s login_process_per_connection: yes login_chroot: yes login_trusted_networks: login_process_size: 64 login_processes_count: 3 login_max_processes_count: 128 login_max_connections: 256 valid_chroot_dirs: mail_chroot: max_mail_processes: 512 mail_max_userip_connections: 10 verbose_proctitle: no first_valid_uid: 500 last_valid_uid: 0 first_valid_gid: 1 last_valid_gid: 0 mail_access_groups: mail_privileged_group: mail mail_uid: mail_gid: mail_location: maildir:~/.mail mail_cache_fields: mail_never_cache_fields: imap.envelope mail_cache_min_mail_count: 0 mailbox_idle_check_interval: 30 mail_debug: no mail_full_filesystem_access: yes mail_max_keyword_length: 50 mail_save_crlf: no mmap_disable: yes dotlock_use_excl: yes fsync_disable: no mail_nfs_storage: no mail_nfs_index: no mailbox_list_index_disable: yes lock_method: fcntl maildir_stat_dirs: no maildir_copy_with_hardlinks: yes maildir_copy_preserve_filename: no maildir_very_dirty_syncs: no mbox_read_locks: fcntl mbox_write_locks: fcntl dotlock mbox_lock_timeout: 300 mbox_dotlock_change_timeout: 120 mbox_min_index_size: 0 mbox_dirty_syncs: yes mbox_very_dirty_syncs: no mbox_lazy_writes: yes dbox_rotate_size: 2048 dbox_rotate_min_size: 16 dbox_rotate_days: 1 mail_drop_priv_before_exec: no mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_process_size: 256 mail_plugins: mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve mail_log_prefix: %Us(%u): mail_log_max_lines_per_sec: 10 imap_max_line_length: 65536 imap_capability: imap_client_workarounds: imap_logout_format: bytes=%i/%o imap_id_send: imap_id_log: imap_idle_notify_interval: 120 pop3_no_flag_updates: no pop3_enable_last: no pop3_reuse_xuidl: no pop3_save_uidl: no pop3_lock_session: no pop3_uidl_format: %08Xu%08Xv pop3_client_workarounds: pop3_logout_format: top=%t/%p, retr=%r/%b, del=%d/%m, size=%s dict_db_config: dict_process_count: 1 managesieve_max_line_length: 65536 managesieve_logout_format: bytes=%i/%o managesieve_implementation_string: dovecot lda: postmaster_address: postmaster(a)xxx.xxx mail_plugin_dir: /usr/lib/dovecot/modules/lda mail_plugins: sieve log_path: /dev/stderr log_timestamp: auth default: mechanisms: plain realms: default_realm: cache_size: 0 cache_ttl: 3600 cache_negative_ttl: 3600 executable: /usr/lib/dovecot/dovecot-auth user: root chroot: username_chars: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ username_translation: username_format: master_user_separator: anonymous_username: anonymous krb5_keytab: gssapi_hostname: winbind_helper_path: /usr/bin/ntlm_auth failure_delay: 2 verbose: no debug: no debug_passwords: no ssl_require_client_cert: no ssl_username_from_cert: no use_winbind: no count: 1 worker_max_count: 30 process_size: 256 passdb: driver: pam args: deny: no pass: no master: no userdb: driver: passwd args: plugin: sieve_extensions: +imapflags sieve_dir: ~/.mail/sieve

2 2

[Dovecot] Dovecot+Postfix+Maildir with ActiveDirectory userbase
by Wayne Thursby 15 Feb '10

15 Feb '10

> Luigi Rosa <lists(a)luigirosa.com> uttered: > Hi, > has anyone implemented a mail server with maildir, Postfix and Dovecot > using > Active Directory ad userbase and password authentication? > > Do I need Samba to authenticate users? > > Can I use credential caching just like mysql? > > > Ciao, > luigi > > -- > / > +--[Luigi Rosa]-- > \ Hi Luigi, I am running a Postfix/Dovecot setup that is authenticating against a Windows 2000 domain. It is possible to authenticate several different ways, including Kerberos/Winbind and NTLM via Samba. I used the following article as a guide. It is for FreeBSD, but the configuration instructions apply equally to any Postfix/Dovecot setup. I am running mine on Ubuntu 8.10. http://blog.al-shami.net/index.php/freebsd-postfix-dovecot-and-active-direc… The above article covers most of the setup, however I have changed a few things for my purposes. In short, I am using LDAP to communicate with the Active Directory server. I am looking up email addresses and aliases from AD in Postfix and using Dovecot as LDA. Postfix uses Dovecot's SASL for authentication, and Dovecot in turn authenticates against AD. My Setup: Postfix and Dovecot running on the same virtual machine on a Dell 2950 with 1x Xeon E5440 on ESXi 4. Maildirs served up by 10x146GB SCSI drives on RAID-10 via direct attached Dell MD-1000. Serving 600+ users, mailbox sizes up to 14GiB with constant heavy searching (no fts yet) and filtering (sieve and IMAP clients). 80,000 messages delivered per week, 95,000 messages rejected, 17,000 spam. 15 minute Load average stays under .50 all day with 4 CPU cores. IMAP clients include Outlook 2007, Thunderbird 2 and 3, in addition to webmail via Group Office (yuck). dovecot-ldap.conf: # Include multiple domain controllers for redundancy, first one is # at the same facility as the Dovecot server. hosts = 10.0.1.12:389 10.0.2.12:389 10.0.3.12:389 # Specify the full DN of a user to authenticate against dn = cn=Internal, ou=People, dc=example, dc=com dnpass = some_secure_password auth_bind = yes ldap_version = 3 base = ou=People, dc=example, dc=com # Specify the base storage for email here user_attrs = sAMAccountName=home=/var/vmail/example.com/%$ # The following user_filter should all be on a single line. # The ugly userAccountControl param means "Exclude disabled users" user_filter = (&(sAMAccountName=%Ln)(!(userAccountControl:1.2.840.113556.1.4.803:=2))) pass_filter = (&(sAMAccountName=%Ln)(!(userAccountControl:1.2.840.113556.1.4.803:=2))) For the Postfix side of things, the article explains how to set Postfix to use Dovecot's SASL for authentication. It also specifies separate confs for Postfix to lookup users and aliases from. For my purposes, I decided not to modify the AD schema, and to instead utilize an unused field to store aliases in. This field had to be able to store multiple values in a way that I could query easily via LDAP. I chose the "IP Phone" field for this purpose. In the AD GUI it is easily accessible, and allows for multiple values to be stored. Note its usage in the queries that follow. /etc/postfix/ldap-users.cf: # Same list of DCs as in dovecot-ldap.conf server_host = ldap://10.0.1.12:389 ldap://10.0.2.12:389 ldap://10.0.3.12:389 search_base = dc=example, dc=com bind = yes bind_dn = EXAMPLE\internal bind_pw = a_secure_password # Use this lookup for email addresses matching the following domains # corresponds with virtal_mailbox_domains in main.cf domain = example.com, examplelegacy.com, exmple.com # The following query has been modified a bit from the above article. # First, the userAccountControl param specifies the exclusion of # disabled users. # The other change is from objectClass to objectCategory. query_filter = (&(&(objectCategory=person)(sAMAccountName=%u))(!(userAccountControl:1.2.840.113556.1.4.803:=2))) result_attribute = sAMAccountName version = 3 # I was having trouble with referrals not resolving properly due to a # misconfigured domain controller. I turned this option off and have # not had a problem since. chase_referrals = no result_format=example.com/%s/ debuglevel = 0 timeout = 30 /etc/postfix/ldap-aliases.cf: # Same list of DCs as in dovecot-ldap.conf server_host = ldap://10.0.1.12:389 ldap://10.0.2.12:389 ldap://10.0.3.12:389 search_base = dc=example, dc=com bind = yes bind_dn = EXAMPLE\internal bind_pw = a_secure_password domain = example.com, examplelegacy.com, exmple.com # This query looks up aliases from the otherIPPhone field. query_filter = (&(&(objectCategory=person)(|(otherIPPhone=%u)(sAMAccountName=%u)))(!(userAccountControl:1.2.840.113556.1.4.803:=2))) result_attribute = sAMAccountName version = 3 chase_referrals = no result_format=%s(a)example.com debuglevel = 0 timeout = 30 The objectCategory replacement for objectClass is a *huge* performance increase. objectClass is not indexed in Active Directory, forcing a lot of CPU cycles to be wasted for every lookup. The way I have implemented things, this means two of these expensive lookups per incoming email (even if it was undeliverable!). At first this was using around 50% CPU on a dual Xeon domain controller. This was acceptable at the time, but after my optimizations we were able to move authentication to a virtual machine with 640MB of RAM and a single CPU core where it now stays below 20% all day. Changing the lookup to an indexed field probably cut the initial load by 90%. Adding auth_cache settings to dovecot.conf then further reduced load by more than 50%. Well, I suppose that screed should suffice for my first post. I've gained much from just lurking in this list, just trying to contribute where I can. -- Wayne Thursby System Administrator Physicians Group, LLC

2 1

Re: [Dovecot] [RCU] Dovecot managesieve
by Frank Bonnet 15 Feb '10

15 Feb '10

Well I've looked forward into the wiki and did not found my server have only system users ( no virtual domain ) and the wiki says : System users If you wish you use deliver for all system users on a single domain mail host you can do it by editing mailbox_command parameter in /etc/postfix/main.cf (postconf(5)): That's what I did but then I have this problem with DOTLOCK If I chmod 777 /var/mail directory it works but I do not feel comfortable with that kind of access rights ... On 02/12/10 20:39, Joseph Kolb wrote: > Hi Frank, > > the question is, do you use the LDA of dovecot (LocalDeliveryAgent)? > If so, then yes, you must add/modify some stuff in master.cf. This is good > described in dovecot wiki :-). > > Regards, > Joseph > > Am Freitag 12 Februar 2010 15:42:12 schrieben Sie: >> Hi Joseph >> >> Thanks for your answer >> >> did you modify something in Postfix main.cf file ? >> >> >> Frank >> >> On 02/12/10 11:57, Joseph Kolb wrote: >>> On Fri, 12 Feb 2010 10:13:53 +0100, "A.L.E.C"<alec(a)alec.pl> wrote: >>>> Frank Bonnet wrote: >>>>>> protocol lda { >>>>>> >>>>>> # Address to use when sending rejection mails. >>>>>> postmaster_address = postmaster(a)esiee.fr >>>> >>>> In dovecot-1.1 I've got in "protocol lda" section: >>>> >>>> mail_plugins = cmusieve >>> >>> Hi Frank, >>> >>> i use also dovecot 1.2.10 >>> >>> and here is my part of dovecot.conf >>> >>> -->snip<--- >>> protocol imap { >>> >>> ssl_listen = *:993 >>> mail_plugins = quota imap_quota >>> >>> } >>> >>> protocol lda { >>> >>> postmaster_address = postmaster(a)xxxx.xx >>> log_path = /var/log/dovecot-lda.log >>> info_log_path = /var/log/dovecot-info-lda.log >>> mail_plugins = sieve >>> >>> } >>> -->snip<--- >>> >>> Regards, >>> Joseph >>> _______________________________________________ >>> List info: http://lists.roundcube.net/users/ >

2 3

[Dovecot] Capability COMPRESS implemented?
by Ed W 15 Feb '10

15 Feb '10

Hi, I just read that http://tools.ietf.org/html/rfc4978 ..is being implemented in Thunderbird 3. This is great news! It's been a long time since we last discussed this and I don't think it's currently implemented in Dovecot, but since Cyrus just added it, any chance of getting support in Dovecot please? (Fastmail seems to be supporting this effort) On a similar note we had a previous thread about supporting TLS deflate - any chance you could investigate this again and add support on the Dovecot side so at least it would be feasible to submit a bug fix on the Thunderbird side? (It looked like a one liner change back when we last discussed it?) Thanks Ed W (Obviously for those looking for an external high performance compressor you can use our compressing email proxy from http://www.mailasail.com ...)

3 14

[Dovecot] So, what about clustering and load balancing?
by Stefan Foerster 15 Feb '10

15 Feb '10

Hello world, so, with beta2 of Dovecot 2.0 being available, what is the preferred way to achieve load balancing and fault tolerance? As far as I can see it, there are basically two options: 1) Use a HA shared storage, export either a cluster filesystem or NFS, and have your dovecot servers mount that file system. Load balance these servers (Cisco ACE, ldirectord, ...) and there you go. Overall performance is limited by the speed of the shared storage and may further decrease due to locking issues, imperformant cluster filesystems and so on. 2) Set up every dovecot server with local storage and trigger a dsync after each change (pyinotfiy, incron, parse LMTP delivery logs, ...). Load balance these servers as before. Depending on the number of syncs that have to be done, mailbox replication may lag behind. The need to constantly spawn dsync processes may further decrease performance if you don't do it right (stickiness of established connections, replicating at most every xyz seconds). What are your opinions on that matter? Stefan P.S: I've set up option two in a test setup, though the incron/inotify part is still giving me a headache.

6 12

[Dovecot] POP3 with dovecot LDA and sieve
by Arthur Titeica 14 Feb '10

14 Feb '10

Hello. I'm using Postfix with Dovecot as IMAP, POP3 and LDA. With sieve rules I successfully move mails to specific mailboxes and this is great if accessing the account thru IMAP. However, when accessing thru POP3 I only get mails from Inbox. I wonder if it's possible to get real new mails, regardless of the folder they're in. Thanks for any thoughts. Arthur

3 3

[Dovecot] comprehensive info on search capabilities?
by Kārlis Repsons 14 Feb '10

14 Feb '10

People, where to read about how to make the most of the current Dovecot search capabilities, including squat and possibly also the related future plans? There are many aspects like IMAP protocol itself, extensions, current support into Dovecot, support among MUAs... Could you post some good links, please?

2 3

[Dovecot] Virtual plugin and user_query
by Arthur Titeica 14 Feb '10

14 Feb '10

Hello, As per a previous reply regarding POP3 I'm now trying to configure the virtual plugin. However I don't really understand how to modify the sql user_query to properly indicate inbox=yes. I created 3 namespaces as per wiki instructions and I've modified the password and user queries as bellow: password_query = \ SELECT email, password, login , concat('*:bytes=', quota) \ AS userdb_quota_rule, \ CASE '%s' WHEN 'pop3' THEN NULL ELSE 'yes' \ END AS namespace_1_inbox, \ CASE '%s' WHEN 'pop3' THEN 'yes' ELSE NULL \ END AS namespace_2_inbox \ FROM users \ WHERE email = '%u' AND login = 'active' user_query = SELECT \ concat('*:bytes=', quota) AS quota_rule, \ CASE '%s' WHEN 'pop3' THEN NULL ELSE 'yes' \ END AS namespace_1_inbox, \ CASE '%s' WHEN 'pop3' THEN 'yes' ELSE NULL \ END AS namespace_2_inbox \ FROM users \ WHERE email = '%u' After that all I get in the logs is: IMAP(arthur(a)psw.ro): Error: namespace configuration error: inbox=yes namespace missing IMAP(arthur(a)psw.ro): Fatal: Namespace initialization failed As I don't really understand those case sql queries is there something I should add in the mysql tables? Any thoughts will be greatly appreciated. Thanks!

2 1

[Dovecot] deliver and cloning file permissions
by Alexander 'Leo' Bergolth 14 Feb '10

14 Feb '10

Hi! I'd like to use deliver (dovecot-1.2.10) as LDA to deliver mails to my local users on my postfix-system. However, deliver tries to copy the filesystem permissions of the mail-spool-files to the user's index files, which doesn't work, since the files in /var/mail/ belong to the group 'mail'. Feb 13 00:21:19 leo-x61 dovecot: deliver(leo): fchown(/home/leo/mail/.imap/INBOX/dovecot.index.log.newlock, -1, 12(mail)) failed: Operation not permitted (egid=100(users), group based on /var/mail/leo) I know that dovecot tries to clone the mailbox permissions in order to support shared folders but it would be nice if there was an option to disable this (or to just try it and ignore the fchown error). I could manually change group ownership of all mailboxes from mail to each user's primary group or set the mailbox-modes to 0600 but I'd also have to do that for every new user. (Tools to create users like useradd from shadow-utils use hardcoded file modes and group ownership.) Is there any workaround? Thanks, --leo -- e-mail ::: Leo.Bergolth (at) wu.ac.at fax ::: +43-1-31336-906050 location ::: IT-Services | Vienna University of Economics | Austria

3 5

[Dovecot] Plugin question
by Valery Gorbunov 14 Feb '10

14 Feb '10

Hi All I needs to write plugin which converting messages by replacing entier message by one of parts of this message. In another words I need show part of multipart message instead entire message. Stream substitution in *mail->v.get_stream()* function gives incorrect results because mail indexed and cached before. Therefore I should wrap email during indexing too. something like: ----- struct index_transaction_context * it; it->ibox->mail_vfuncs->get_stream = convert_get_stream; ----- Is it enough or idea to replace mail stream by another will don't work anyway? Could you suggest how to show one mail instead another in Dovecot environment? Thank you Valery Gorbunov

2 1

[Dovecot] Dovecot+Postfix+Maildir with ActiveDirectory userbase
by Luigi Rosa 13 Feb '10

13 Feb '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, has anyone implemented a mail server with maildir, Postfix and Dovecot using Active Directory ad userbase and password authentication? Do I need Samba to authenticate users? Can I use credential caching just like mysql? Ciao, luigi - -- / +--[Luigi Rosa]-- \ This morning at breakfast, I noticed that Kellogg's have put a helpline number on their cornflake packets. When you need a helpline for breakfast cereals, it's time to start thinking about tearing down civilisation and giving the ants a go. --Chris King -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkt2wGAACgkQ3kWu7Tfl6ZR3qQCgv7+smY1v1YY3OAK+A2lH/adr JtIAoIU+yd9zecP+iKoSxOAyaZJLnRfR =KnFa -----END PGP SIGNATURE-----

1 0

[Dovecot] scalability
by Jonathan Tripathy 13 Feb '10

13 Feb '10

Hi Folks, How scalable is dovecot. Do you think a machine with a dual core 2.8Ghz processor and 2GB of RAM would do a business with 600 users? This server will have a 100Mbps link to the net, however it will be access by the business using a couple of ADSL lines (Roughly 7Mbps each). This machine will also be running Postfix Your help is appreciated Cheers Jonny

3 2

[Dovecot] problem with deliver segfaulting
by Leonardo Rodrigues 13 Feb '10

13 Feb '10

i'm facing a pretty hard to debug problem when trying to use dovecot LDA (deliver) from postfix. After having all configured, mail deliver fails. This is from my maillog: Feb 12 21:27:54 correio postfix/pipe[12484]: 930F9F6105: to=<solutti(a)domain.com.br>, relay=dovecot, delay=0.21, delays=0.03/0.01/0/0.18, dsn=4.3.0, status=SOFTBOUNCE (Command died with signal 11: "/usr/libexec/dovecot/deliver") at the same time, i have from my /var/log/messages: Feb 12 21:27:54 correio kernel: deliver[12485]: segfault at 0 ip 4c1be763 sp bff64c28 error 4 in libc-2.5.so[4c193000+13f000] so, seems deliver segfaults. so i tried enabling mail_debug=yes on dovecot.conf for getting some debug ..... and, with mail_debug enabled, deliver WORKS !!!! Feb 12 21:28:41 correio postfix/pipe[12748]: 1A969F6105: to=<solutti(a)domain.com.br>, relay=dovecot, delay=0.28, delays=0.03/0.01/0/0.24, dsn=2.0.0, status=sent (delivered via dovecot service) disabling mail_debug makes the segfault happens again .... and reenabling mail_debug make it works again ! how can i debug this !?!?!? -- Atenciosamente / Sincerily, Leonardo Rodrigues Solutti Tecnologia http://www.solutti.com.br Minha armadilha de SPAM, NÃO mandem email gertrudes(a)solutti.com.br My SPAMTRAP, do not email it

2 5

[Dovecot] REPOST: mbox vs maildir
by Ashley M. Kirchner 12 Feb '10

12 Feb '10

Ignoring my previous message just for a second, I realized that my config wasn't correct. First the layout: ~mail/ ~mail/Drafts ~mail/Ashley-Feb09 ~mail/Others-Feb09 ~mail-Archives/ ~mail-Archives/2009/ ~mail-Archives/2009/Ashley/ ~mail-Archives/2009/Ashley/Ashley-Dec09 ~mail-Archives/2009/Ashley/Ashley-Nov09 ~mail-Archives/2009/Ashley/Ashley-Oct09 So I (now) have this for namespaces: namespace private { separator = / prefix = "mail/" location = mbox:~/mail:INBOX=/var/mail/%u inbox = yes hidden = no list = yes # for v1.1+ } namespace private { separator = / prefix = "mail-Archives/" location = maildir:~/mail-Archives:LAYOUT=fs inbox = no hidden = no list = yes subscriptions = yes } But when I'm in Thunderbird and I try to subscribe to anything that falls inside of ~/mail-Archives/ it won't work. I can browser all the way down to the folder, but I can't see anything within that folder. For example, consider the full path to the following 'Ashley-Dec09' mailbox: ~mail-Archives/2009/Ashley/Ashley-Dec09 In Thunderbird, when I hit 'Subscribe' I can browse down to '2009' and I can see 'Ashley', but I can't drill down into it and subscribe to 'Ashley-Jan09'. What am I missing here?

1 0

[Dovecot] dovecot v1.2.10 + unknown mail_uid parameter [RESOLVED]
by maximatt 12 Feb '10

12 Feb '10

hi.. i can resolve them setting de following parameters: in dovecot.conf: - coment mail_uid and mail_gid parameters: #mail_uid= 72940 #mail_gid= 72941 in dovecot-ldap.conf: - add the foollowing parameters in "user_attrs": user_attrs= .....,=uid=72940,gid=72941 thanks! -- Salu2 ;)

1 0

[Dovecot] sieve vacation
by Lampa 12 Feb '10

12 Feb '10

Hello, scenario: OK 1. created vacation script (see below) OK 2. send message from user(a)anotherdomain.tld to user(a)domain.tld => got auto vacation response (2010-02-11T19:42:13) OK 3. send message from user(a)anotherdomain.tld to user(a)domain.tld => no response (is ok because ":days 1" settings) (2010-02-11T19:47:46) BAD 4. send message from anotheruser(a)anotherdomain.tld to user(a)domain.tld => no response (2010-02-11T19:48:04) Why is discarding vacation response for message implicitly delivered to <user(a)domain.tld> ? log: 2010-02-11T19:42:13.669321+01:00 hermes dovecot: deliver(user(a)domain.tld): sieve: msgid=<052a01caab49$ec4752e0$c4d5f8a0$@tld>: sent vacation response to <user(a)anotherdomain.tld> 2010-02-11T19:42:13.732541+01:00 hermes dovecot: deliver(user(a)domain.tld): sieve: msgid=<052a01caab49$ec4752e0$c4d5f8a0$@tld>: stored mail into mailbox 'INBOX' 2010-02-11T19:47:46.271534+01:00 hermes dovecot: deliver(user(a)domain.tld): sieve: msgid=<053201caab4a$b295ece0$17c1c6a0$@tld>: discarded duplicate vacation response to <user(a)anotherdomain.tld> 2010-02-11T19:47:46.275891+01:00 hermes dovecot: deliver(user(a)domain.tld): sieve: msgid=<053201caab4a$b295ece0$17c1c6a0$@tld>: stored mail into mailbox 'INBOX' 2010-02-11T19:48:04.958622+01:00 hermes dovecot: deliver(user(a)domain.tld): sieve: msgid=<053701caab4a$bda90220$38fb0660$@tld>: discarding vacation response for message implicitly delivered to <user(a)domain.tld> 2010-02-11T19:48:04.965875+01:00 hermes dovecot: deliver(user(a)domain.tld): sieve: msgid=<053701caab4a$bda90220$38fb0660$@tld>: stored mail into mailbox 'INBOX' vacation script: ----------- require "vacation"; vacation :days 1 :subject "Auto reply" "auto reply message"; -------------- Thank you -- Lampa

2 1

Re: [Dovecot] Dovecot and duplicates
by Veikko "Wexi" Skurnik 11 Feb '10

11 Feb '10

On 10.2.2010 1:54, Gabriel Millerd wrote: > > > On Wed, Feb 10, 2010 at 5:14 AM, Veikko "Wexi" Skurnik <wexi(a)wexin.net > <mailto:wexi@wexin.net>> wrote: > > > I'm having a problem setting up duplicate filtering on my mail > server. I've set up the mail server with Postfix and Dovecot with > virtual LDAP users, ClamAV virus scanning. The problem is that > some of the virtual users use multiple e-mail addresses and > postfix delivers emails sent to a user as many times as the user > has email address entries in LDAP. I was wondering what would be > the smartest way to get rid of these duplicates, they have > identical message ID:s and a simple procmail recipe does the > trick, however as I'm using dovecots deliver, procmail isn't the > answer. Is it possible to use Sieve to do this, I've been > googling around *a lot* and haven't found anything that would > solve the problem... > > > i would assume that there is a postfix mechanism for consolidating > these once it has normalized / expanded the rcpts for the message. > > > -- > Gabriel Millerd I've been trying to figure this out and no luck... I still think that one possibility could be a Sieve script that would discard messages based on a message-ID cache like the procmail recipe does. Does dovecot's deliver have some sort of message-ID cache that could be used to removed the duplicates? Or if anyone has any ideas how to do this, I'm open to suggestions =) Wexi -- * Veikko "Wexi" Skurnik: +358(44)5288338 * * wexi(a)wexin.net Wexi@IRCNet * * Näyttämönkatu 4 B 12 33720 Tampere * * "Kosminen balanssi ei saa järkkyä" *

2 2

[Dovecot] Dovecot + managesieve + Roundcube
by Frank Bonnet 11 Feb '10

11 Feb '10

Hello I've installed managesieve on my mailhub FreeBSD from dovecot-managesieve ports to let roundcube users build email filters. The filter are well created in the right directory but the filter seems inefficient ( it does not filter ;-) ) see below the result of the dovecot -n command Thanks for any info > mail# dovecot -n > # 1.2.10: /usr/local/etc/dovecot.conf > # OS: FreeBSD 7.2-RELEASE amd64 > log_path: /var/log/dovecot/dovecot.log > info_log_path: /var/log/dovecot/info.log > protocols: imap imaps pop3 pop3s managesieve > listen(default): * > listen(imap): * > listen(pop3): * > listen(managesieve): localhost:2000 > disable_plaintext_auth: no > login_dir: /var/run/dovecot/login > login_executable(default): /usr/local/libexec/dovecot/imap-login > login_executable(imap): /usr/local/libexec/dovecot/imap-login > login_executable(pop3): /usr/local/libexec/dovecot/pop3-login > login_executable(managesieve): /usr/local/libexec/dovecot/managesieve-login > login_processes_count: 10 > login_max_processes_count: 256 > login_max_connections: 1024 > max_mail_processes: 4096 > verbose_proctitle: yes > mail_privileged_group: mail > mail_location: mbox:%h/:INBOX=/var/mail/%u > mail_executable(default): /usr/local/libexec/dovecot/imap > mail_executable(imap): /usr/local/libexec/dovecot/imap > mail_executable(pop3): /usr/local/libexec/dovecot/pop3 > mail_executable(managesieve): /usr/local/libexec/dovecot/managesieve > mail_plugin_dir(default): /usr/local/lib/dovecot/imap > mail_plugin_dir(imap): /usr/local/lib/dovecot/imap > mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 > mail_plugin_dir(managesieve): /usr/local/lib/dovecot/managesieve > imap_client_workarounds(default): outlook-idle tb-extra-mailbox-sep > imap_client_workarounds(imap): outlook-idle tb-extra-mailbox-sep > imap_client_workarounds(pop3): > imap_client_workarounds(managesieve): > pop3_uidl_format(default): %08Xu%08Xv > pop3_uidl_format(imap): %08Xu%08Xv > pop3_uidl_format(pop3): %08Xv%08Xu > pop3_uidl_format(managesieve): %08Xu%08Xv > managesieve_logout_format(default): bytes=%i/%o > managesieve_logout_format(imap): bytes=%i/%o > managesieve_logout_format(pop3): bytes=%i/%o > managesieve_logout_format(managesieve): bytes ( in=%i : out=%o ) > lda: > postmaster_address: postmaster(a)esiee.fr > auth default: > verbose: yes > worker_max_count: 50 > passdb: > driver: passwd > userdb: > driver: passwd > plugin: > sieve: ~/.dovecot.sieve > sieve_dir: ~/sieve

2 1

[Dovecot] apache2 mod_authn_dovecot
by Boris Manojlovic 11 Feb '10

11 Feb '10

Dear All, I have created apache2 module that allows web users to authenticate against dovecot auth daemon. It connect to dovecot authentication client socket. Currently implemented mechanism is plaintext PLAIN. Currently there are no plans to support any other as only thing that i have created in apache module is "Basic" auth. Source code can be downloaded from; http://github.com/bmanojlovic/mod_authn_dovecot or tagged version v0.1 from: http://github.com/bmanojlovic/mod_authn_dovecot/tarball/v0.1 Currently built RPMS can be downloaded from OpenSUSE build service URL: http://download.opensuse.org/repositories/home:/bmanojlovic/<Distribution of choice> Please comment or raise issues if you think it is useful or full of bugs :). Boris Manojlovic P.S. Very basic README - HOW TO is on this URL http://github.com/bmanojlovic/mod_authn_dovecot/blob/master/README

1 0

[Dovecot] upgrade 1.0.15-2.3+lenny1 to 1.2.9-1~bpo50+1
by Stan Hoeppner 11 Feb '10

11 Feb '10

System: Debian 5.0.4 Lenny Kernel: custom 2.6.31.1 built from kernel.org source Dovecot: 1.0.15-2.3+lenny1 Available: 1.2.9-1~bpo50+1 Mailbox format: mbox Storage location: /home/$user/mail/ on ext2 fs Delivery: Postfix 2.5.5 local to /var/mail/$user As you can see Debian has a backport package of Dovecot 1.2.9 available to Lenny users, and it appears it is a big jump forward in terms of elapsed time and codebase. Debian ships Dovecot in a collection of 6 packages. I currently only use two, dovecot-common and dovecot-imapd. I'm guessing it would probably be wise to shutdown all my current Dovecot processes before starting the upgrade. Before I do this upgrade I figured I'd ask first to see if there are any gotchas or explosions awaiting me. Any warnings, hints, pointers anyone? Timo? Thanks. -- Stan

3 2

[Dovecot] fts squat -> webmail, fastcgi timeout: SOLR the answer?
by mailinglists＠belfin.ch 11 Feb '10

11 Feb '10

Hi I turned on fts squat to speed up full text searches over webmail. This works absolutely fantastic once the mailboxes are indexed. But when they are indexed for the first time I'm getting a fastcgi timeout after 30 seconds resulting into a internal server error on the webserver. In the background the indexing job is getting finished after 80 seconds for a 25k emails, ~300MB mailbox. Does solr allow user-offline indexing (no user interaction needed to kick on indexing) ? And the other question is, is there any mail user agent that would support server-side full text indexing and not create own indexes? Thanks, Philipp

5 9

[Dovecot] Purging a large folder... anything I need to be careful of?
by Dave 10 Feb '10

10 Feb '10

I've got a large message folder (about 40G in 'cur') that I need to empty to a more reasonable size. Oddly, my Thunderbird e-mail client only sees about 2.4G of that, and has "looped" a few times. What I mean is, I thought someone was cleaning the folder out, but Thunderbird apparently was actually just looping back to 0 every 4 gigs and starting to count up again Ha. But that's a sidenote. So, since Thunderbird apparently is not seeing all of the messages, what is the safest way to delete the files straight from the 'cur' folder? IS that safe? Will I mess up any of the dovecot indexes in any way?? Dave

5 11

[Dovecot] mbox vs maildir
by Ashley M. Kirchner 10 Feb '10

10 Feb '10

Ignoring my previous message just for a second, I realized that my config wasn't correct. So I have this for namespaces: namespace private { separator = / prefix = "mail/" location = mbox:~/mail:INBOX=/var/mail/%u inbox = yes hidden = no list = yes # for v1.1+ } namespace private { separator = / prefix = "mail-Archives/" location = maildir:~/mail-Archives:LAYOUT=fs inbox = no hidden = no list = yes subscriptions = yes } But when I'm in Thunderbird and I try to subscribe to anything that falls inside of ~/mail-Archives/ it won't work. I can browser all the way down to the folder, but I can't see anything within that folder. For example, consider the full path to the following 'Ashley-09' mailbox: ~/mail-Archives/2009/Ashley/Ashley-Jan09 In Thunderbird, when I hit 'Subscribe' I can browse down to '2009' and I can see 'Ashley', but I can't drill down into it and subscribe to 'Ashley-Jan09'. What am I missing here?

1 0

[Dovecot] Folders within folders ...
by Ashley M. Kirchner 10 Feb '10

10 Feb '10

Our mail setup is as follows: ~/mail/ - This contains single mailboxes (Drafts, Trash, and others) ~/mail-Archives/ - This contains a hierarchy of folders containing mailboxes For example, a tree of ~/mail/ would look like this: ~/mail/ ~/mail/Trash ~/mail/Drafts ~/mail/sent-mail ~/mail/My Stuff ~/mail/Important ~/mail/test/SomeFolder <-- this would never happen, but I have to account for it during our transition A tree of ~/mail-Archives/ would look like this: ~mail-Archives/2009/MyStuff/MyStuff-Dec09 ~mail-Archives/2009/MyStuff/MyStuff-Nov09 ~mail-Archives/2009/MyStuff/MyStuff-Oct09 ~mail-Archives/2010/MyStuff/MyStuff-Jan10 ~mail-Archives/2010/Important/Important-Jan10 All of that works, I can open up Thunderbird and browser/read/delete messages no problem. However, when I try to move that 'test' folder from ~/mail/ into ~/mail-Archives I get an error message: 'Can't rename mailbox to another storage type.' The same thing happens if I try to move any of the mailboxes in ~/mail/ to ~/mail-Archives/ . Is there a way to fix that? Our namespaces look like this: namespace private { separator = / prefix = "mail/" location = mbox:~/mail:INBOX=/var/mail/%u inbox = yes hidden = no list = yes # for v1.1+ } namespace private { separator = / prefix = "mail-Archives/" location = mbox:~/mail-Archives inbox = no hidden = no list = yes subscriptions = yes }

1 0

Re: [Dovecot] dovecot and AFS SOLVED
by Per-Erik Persson 10 Feb '10

10 Feb '10

Sorry for the fuzz on the thread earlier. I now have dovecots deliver (1.1.?)up and running and delivering mails to maildirs located on the AFS So if anyone is wondering, I would say that AFS works as a backend for storing emails without any ugly patches.

3 4

[Dovecot] Dovecot and duplicates
by Veikko "Wexi" Skurnik 10 Feb '10

10 Feb '10

Hi I'm having a problem setting up duplicate filtering on my mail server. I've set up the mail server with Postfix and Dovecot with virtual LDAP users, ClamAV virus scanning. The problem is that some of the virtual users use multiple e-mail addresses and postfix delivers emails sent to a user as many times as the user has email address entries in LDAP. I was wondering what would be the smartest way to get rid of these duplicates, they have identical message ID:s and a simple procmail recipe does the trick, however as I'm using dovecots deliver, procmail isn't the answer. Is it possible to use Sieve to do this, I've been googling around *a lot* and haven't found anything that would solve the problem... This is the procmail recipe that succesfully eliminates the duplicates: MAILDIR=/var/vmail :0 Wh: msgid.lock | formail -D 8192 .msgid.cache Or could another solution be to configure postfix to first receive the email, then let procmail do the duplicate filtering, then ClamAV does the virus scan and finally dovecots deliver delivers the message to the virtual user's mailbox? Any help will be greatly appreciated =) Wexi -- * Veikko "Wexi" Skurnik: +358(44)5288338 * * wexi(a)wexin.net Wexi@IRCNet * * Näyttämönkatu 4 B 12 33720 Tampere * * "Kosminen balanssi ei saa järkkyä" *

1 0

[Dovecot] Understanding migrateuser.sh
by Stewart Dean 09 Feb '10

09 Feb '10

I'm sure it comes from my being a gormless idiot, but whatever is the -UKWS argument immediately after the mb2md.pl invocation? > $MB2MD -UKWS -s "$INBOX" -d "$WORKING" As always, reading the idiom of someone else's scripting is an education. And some of it wouldn't work with native AIX sh/ksh, so changed the functions: > folders_hash() { > local HASH=`find $FOLDERS -type f |sort|(IFS=\ > ;while read file; do ls -l "\$file"; done)` > eval "$1=\"$HASH\"" > } > to: > folders_hash() { > local IFS=\ > local HASH=`find $FOLDERS -type f | sort | \ > while read file > do > ls -l "\$file" > done` > # the escapes are so that $1 gets "$HASH" NOT $HASH > # So the resolution is deferred... > eval "$1=\"$HASH\"" > } I would have wished for a few more comments within the script. -- ==== Once upon a time, the Internet was a friendly, neighbors-helping-neighbors small town, and no one locked their doors. Now it's like an apartment in Bed-Stuy: you need three heavy duty pick-proof locks, one of those braces that goes from the lock to the floor, and bars on the windows.... ==== Stewart Dean, Unix System Admin, Bard College, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

1 1

[Dovecot] check password on behalf of user
by Nikolay Shopik 09 Feb '10

09 Feb '10

I'm running KDC with all users and passwords, but have to manage clients who doesn't support GSSAPI like mobile phones. Is it possible to dovecot SASL check password in KDC when user sends plain text login? I know this is possible to do with saslauthd from Cyrus but prefer to stick with dovecot SASL.

2 5

[Dovecot] Converting layouts
by Luciano Mannucci 09 Feb '10

09 Feb '10

Hello, I'm using dovecot 1.2.10 with mbox format (which implies layout=fs) and I would like to switch to maildir++ layout without changing format in order to implement subfolders for IMAP users. I understand that I should move the INDEX location to avoid some namespace conflict (it would be a good idea anyway: I'll move them on another disc :). Now I have mail_location = mbox:/var/spool/mailboxes/%u:INBOX=/var/spool/mail/%u in my /etc/dovecot.conf. I think it should become somethink like mail_location=mbox:/var/spool/mailboxes/%u:LAYOUT=Maildir++:INBOX=/var/spool/mail/%u:INDEX=/var/dovecot_indexes I'll have to rename folders for IMAP users, right? Is there some script that does just that? Some other needed black magic for .subscriptions? Thanks to all in advance, Luciano. -- /"\ /Via A. Salaino, 7 - 20144 Milano (Italy) \ / ASCII RIBBON CAMPAIGN / PHONE : +39 2 485781 FAX: +39 2 48578250 X AGAINST HTML MAIL / E-MAIL: posthamster(a)sublink.sublink.ORG / \ AND POSTINGS / WWW: http://www.mannucci.ORG/

2 1

[Dovecot] Get plugins configuration
by Alex Baule 09 Feb '10

09 Feb '10

Hello everyone.... There is a way to get configurations in dovecot.conf inside a plugin ?

2 1

[Dovecot] Messages marked as unread - Dovecot 1.2.10 - Thunderbird 2.0.0.23
by Thorsten Habich 09 Feb '10

09 Feb '10

Hi! I upgraded some of our systems to dovecot 1.2.10 now I noticed that some of my messages are marked as unread. This disappears after reopening the folder again. Greetings, Thorsten

7 13

[Dovecot] Problem with created ~/mail directory
by Chris Adams 08 Feb '10

08 Feb '10

If a user doesn't have a ~/mail directory and logs in, the directory is created for them. However, it is created with insecure permissions, 0770 (full group access). The problem is this bit in src/lib-storage/index/mbox/mbox-storage.c: #define CREATE_MODE 0770 /* umask() should limit it more */ The code then uses CREATE_MODE as an argument to mkdir_parents(), but mkdir_parents() overrides the umask setting and forces the requested permissions. There's no way to override this except to change the source code. It looks like the same thing is in dbox-storage.c and cydir-storage.c. This is with Dovecot 1.2.10. -- Chris Adams <cmadams(a)hiwaay.net> Systems and Network Administrator - HiWAAY Internet Services I don't speak for anybody but myself - that's enough trouble.

2 4

[Dovecot] Plugin question
by Valery Gorbunov 08 Feb '10

08 Feb '10

Hi All. I am developing plugin for Dovecot. And I needs for read some configuration file at startup and store configuration in application wide variable. As I see the plugin_init() method calls multiple times and allocates plugin's variables each time. Could you suggest better way to store variable in application context. Thank you Valery Gorbunov

2 1

[Dovecot] Problems with thunderbird 3 ( messages mark unread after being read )
by Frank Bonnet 08 Feb '10

08 Feb '10

Hello Since we upgrade all our users's PC with Thunderbird 3(.0.1) many of them have a problem with email that move back to unread status even after they have read them. The problem does not occured with Thunderbird 2 Is this problem Dovecot related ? Do you have the same trouble ? Thank you

6 5

[Dovecot] Next message unexpectedly corrupted in mbox file
by Justin Piszcz 08 Feb '10

08 Feb '10

Hi, I am seeing this on one of my servers: Jan 8 10:08:58 l1 dovecot: IMuser(user): Next message unexpectedly corrupted in mbox file /home/user/Mailbox at 10558 I have never seen this before, and google yields no results except when this warning was added to the source code here: http://www.dovecot.org/list/dovecot-cvs/2009-December/015177.html The user has deleted all of the mail in the Mailbox but the problem persists. Any ideas? Justin.

4 9

[Dovecot] managesieve does call a wrong chown
by Wolfgang.Friebel＠desy.de 07 Feb '10

07 Feb '10

After upgrading from dovecot 1.2.3, managesieve 0.11.8, sieve 0.1.11 to dovecot 1.2.9, managesieve 0.11.10 and sieve 0.1.14 users who do not have sieve rules yet and use managesieve for the first time do trigger error messages in the log file (for the authenticated user ggg in group syspr): Jan 4 17:35:26 apollo dovecot: MANAGESIEVE(ggg): chown(/var/spool/sieve/ggg, -1, 0(root)) failed: Operation not permitted (egid=203(syspr)) Jan 4 17:35:26 apollo dovecot: MANAGESIEVE(ggg): sieve-storage: sieve_storage_verify_dir(/var/spool/sieve/ggg/tmp) failed: Operation not permitted Jan 4 17:35:26 apollo dovecot: MANAGESIEVE(ggg): Fatal: Failed to create sieve storage with data: /var/spool/sieve/ggg Anyway the filter rules get created (used avelsieve) and the filter does get compiled when the first mail hits the rule. Subsequent invocations of managesieve do not try to change the group ownership of the directory. Looks like an annoyance only, but I would feel more comfortable w.o. the error messages. the dovecot -n output: # 1.2.9: /etc/dovecot.conf # OS: Linux 2.6.18-164.6.1.el5 x86_64 Scientific Linux SL release 5.4 (Boron) protocols: imap imaps managesieve listen(default): * listen(imap): * listen(managesieve): *:2009 shutdown_clients: no login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(managesieve): /usr/libexec/dovecot/managesieve-login login_processes_count: 5 login_max_processes_count: 512 verbose_proctitle: yes mail_location: maildir:~/Maildir mmap_disable: yes fsync_disable: yes lock_method: dotlock maildir_copy_with_hardlinks: no mbox_read_locks: dotlock flock mbox_write_locks: dotlock flock mail_drop_priv_before_exec: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(managesieve): /usr/libexec/dovecot/managesieve mail_plugins(default): quota imap_quota zlib acl imap_acl listescape mail_plugins(imap): quota imap_quota zlib acl imap_acl listescape mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(managesieve): /usr/lib64/dovecot/managesieve imap_client_workarounds(default): delay-newmail netscape-eoh tb-extra-mailbox-sep outlook-idle imap_client_workarounds(imap): delay-newmail netscape-eoh tb-extra-mailbox-sep outlook-idle imap_client_workarounds(managesieve): namespace: type: private separator: / location: maildir:~/Maildir inbox: yes list: yes subscriptions: yes namespace: type: private separator: / prefix: #mbox/ location: mbox:~/mail:CONTROL=~/mboxctrl hidden: yes list: no subscriptions: yes lda: postmaster_address: postmaster(a)ifh.de mail_plugins: sieve quota acl sieve_global_path: /var/spool/sieve/default.sieve quota_full_tempfail: yes auth_socket_path: /var/run/dovecot/auth-master fsync_disable: no auth default: mechanisms: gssapi gss-spnego login plain realms: IFH.DE DESY.DE cache_size: 32 passdb: driver: pam args: max_requests=1 cache_key=%u userdb: driver: passwd-file args: /etc/userdb socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 master: path: /var/run/dovecot/auth-master mode: 438 plugin: quota: maildir:User Quota quota_rule: *:storage=1000MB quota_rule2: INBOX:storage=1000MB quota_rule3: Trash:ignore acl: vfile:/etc/dovecot-acls:cache_secs=300 acl_shared_dict: file:/var/spool/shared/shared-mailboxes.db sieve_storage: /var/spool/sieve/%u sieve: /var/spool/sieve/%u.sieve quota_warning: storage=95%% /usr/local/bin/mailquota-warning.sh 95 quota_warning2: storage=80%% /usr/local/bin/mailquota-warning.sh 80 quota_warning3: storage=60%% /usr/local/bin/mailquota-warning.sh 60 -- Wolfgang Friebel Deutsches Elektronen-Synchrotron DESY Phone/Fax: +49 33762 77372/216 Platanenallee 6 Mail: Wolfgang.Friebel AT desy.de D-15738 Zeuthen Germany

3 5

[Dovecot] LMTP in 2.0: concurrency, inet sockets
by Stefan Foerster 07 Feb '10

07 Feb '10

I didn't really have much time to look at the beta versions of dovecot 2.0 (apart from installing it once and migrating most of my current configuration, purely for testing purposes). An exciting new feature is the LMTP support. In the default configuration I have seen, that one only listened on a Unix socket - will it support network (inet) sockets, too? What about concurrent deliviers? As of now, when using the deliver LDA together with Postfix, you have to make sure that only one recipient is passed to deliver at a time, so for multi-recipient mail, the system might spawn a large number of processes (two per recipient, therefore two forks/execve calls). Is that limit still imposed with the new LMTP server? Stefan

3 4

Re: [Dovecot] LMTP in 2.0: concurrency, inet sockets
by Timo Sirainen 07 Feb '10

07 Feb '10

On Sun, 2010-02-07 at 13:40 +0100, Stefan Foerster wrote: > For 100k messages, delivery to a Maildir store using Postifx's pipe(8) > and Dovecot's deliver took 4319s, which equals 23.15 delivieries per > second - and that's with the pipe(8) delivery agent haning around for > up to 100 seconds, being reused for multiple transactions. > > Dovecot 2.0, with LMTP, was finished after 4007s, which equals 24.96 > deliveries per second. You could also try if maildir_very_dirty_syncs=yes affects it.

1 0

[Dovecot] blocked for xx secs
by Andrew Hearn 06 Feb '10

06 Feb '10

Hello, Occasionally (a few times a day) we get batches of Warnings in the log such as: dovecot: Warning: chdir(/maildir/x.co.uk/users/y) blocked for 18 secs This tends to last a minute or so for different users. /maildir is a NFS mount, and I'm suspecting it's the NFS server being busy and dovecot having to wait. Other than replacing the NFS server with faster hardware is there anything else we can do? Indexes are local, and Maildir is on the NFS. Dovecot 1.2.5 using: mail_nfs_storage = yes mmap_disable = no NFS mounted as; /maildir on /.automount/a.diskless/root/mail type nfs (nosuid,nodev,noatime,vers=3,proto=tcp) TIA -- Andrew

2 1

[Dovecot] Compressing Maildir mails on delivery
by Timo Sirainen 06 Feb '10

06 Feb '10

Now supported by v2.0. Also as a patch to v1.2: http://dovecot.org/patches/1.2/zlib-compress.diff I'm not really sure if I should commit it to v1.2 code tree. The code contains ugly copy&pasted io_stream_copy() and v1.2 is supposed to be feature complete..

3 5

[Dovecot] Also - is there a reliable way for TB to know it is connecting to a dovecot server?
by Charles Marcus 06 Feb '10

06 Feb '10

This would be so it could auto-disable GLODA - its new 'Global Search and Indexing' scheme - for that account - assuming they accept (and implement) my bug request to be able to do that: https://bugzilla.mozilla.org/show_bug.cgi?id=544100

2 6

[Dovecot] upgrade 1.0.x -> 1.2.x
by maximatt 06 Feb '10

06 Feb '10

its posible upgrade from dovecot 1.0.x to 1.2.x? i only see upgrades over micro versions.. thanks! -- Salu2 ;)

2 1

[Dovecot] v2.0: tcp-wrappers support
by Timo Sirainen 06 Feb '10

06 Feb '10

Some people have been requesting this forever. So finally this works: service tcpwrap { unix_listener login/tcpwrap { mode = 0666 } } login_access_sockets = tcpwrap There can also be more sockets listed, in case someone wants to build their own access checking service.

1 0

[Dovecot] pop3 quick question
by Nikita Koshikov 06 Feb '10

06 Feb '10

Hello list, I have found imap_allowed option in dovecot which do exactly what I need, for imap. Is there something similar for pop3 protocol? The main goal for it - is to enable pop3 access to specific users. Or maybe dovecot have some 'pop3=yes' or 'imap=no' args to userdb/passdb sections ? I know future dovecot 2.* versions will support rewriting for protocols, but this is required for 1.2 branch.

2 2

Re: [Dovecot] mdbox compression
by Damon Atkins 06 Feb '10

06 Feb '10

ZFS has support for compression on the file system ( lzjb | gzip | gzip-N | zle ). gzip eats CPU even at levels as low as 3. From the zfs man page The lzjb compression algorithm is optimized for performance while providing decent data compression. You can specify the gzip level by using the value gzip-N where N is an integer from 1 (fastest) to 9 (best compression ratio). The cost of CPU to support compression (gzip) vs the Cost of Disk if mboxes are not compressed? The other interesting feature ZFS (OpenSolaris) has is de-duplication, it detects if the block which is about to be written, is the same as another block and instead of writing the block it puts a pointer to the already existing block, saving disk space. Only problem with this is you would need to filter out headers which are different even when the to/body is the same. Cheers

1 0

[Dovecot] mdbox compression
by Timo Sirainen 06 Feb '10

06 Feb '10

I was wondering if I should add compression support to mdbox one mail at a time or one file (~2MB) at a time. The tradeoffs are: * one mail at a time allows quickly seeking to wanted mail inside the file, but it can't compress mails as well * one file at a time compresses better, but seeking is slow because it can only be done by uncompressing all the data until the wanted offset is reached I did a quick test for this with 27 MB of my old INBOX mails: (note the -b option, so it doesn't count wasted fs space) mdbox/storage% du -sb . 15120350 . Maildir/cur% du -sb . 16517320 . % echo 1-15120350/16517320|bc -l .08457606924125705623 So, compressed mdboxes take 8.5% less space. This was with regular gzip compression with default level. With bzip2 -9 compression the difference was 10%. Any thoughts on if 8-10% is significant enough improvement to make seeking performance worse? Or perhaps I should just implement both ways.. :)

4 6

[Dovecot] Dovecote does'nt start - no log ?
by Jean-Francois 06 Feb '10

06 Feb '10

Hi All, Actually, I installed Dovecot on an OpenBSD server, however, after properly setting (assumed) the confs, Dovecot does'nt start. I don't know the reason but don't know how to debug. Where is the log about reason for not starting ? Thank you for helping. Regards

4 11

[Dovecot] Forcibly emptying a POP3 mailbox
by Răzvan Sandu 05 Feb '10

05 Feb '10

Hello, I've recently saw a discussion on this list, about a standardised way of emptying POP3 mailboxes on the server - but no solution came up. Please provide a suggestion for the following situation: - I am running a stock POP3 dovecot server, on Fedora 12 (dovecot version 1.2.9) - passwd-file authentication via /etc/imap.passwd - users are virtual, sharing the same UID/GID; - storage is in MailDir system; - for remote users, server is POP3-only, since the administrative policy says that every user should download his messages on the local workstation, then delete them from server immediately after succesful download. - IMAP is allowed only locally, in order to be used together via stock squirrelmail Web interface (for emergencies only) However, there are users that check the infamous „Leave a copy on the server” checkbox (or equivalent) in their mail clients, eventually adding „Delete messages after X days”. Since I have no direct administrative control on the clients, I absolutely need a way to forbid the above behaviour at server level, in order to enforce the policy. The server's HDD is meant to store received messages from reception to the first access only. Filesystem quotas are not an option in this scenario, since the UID/GID is the same for all virtual users. What I need is way to make sure that "cur" and "tmp" subdirectories are perfectly empty after the user downloads his mail. (I will also need a way to make sure that users using squirrelmail leave no populated "Sent" and "Trash" folders on server's HDD, but that's offtopic here). Could you please suggest a way to solve this ? Thanks a lot, Răzvan

5 5

Re: [Dovecot] Forcibly emptying a POP3 mailbox
by Răzvan Sandu 05 Feb '10

05 Feb '10

Hello, Thanks a lot, but the problem here are not the IMAP users accessing the server via squirrelmail. Few people use this. What I mainly want to avoid are *POP3* users checking the „Leave a copy on the server” checkmark. I need a way of automatically performing the DELE command at server level, just after a POP3 user *succesfully* downloaded his messages via POP3... Thanks again, Răzvan

5 4

[Dovecot] postfix and dovecot on different systems - sasl request
by thomas polnik 05 Feb '10

05 Feb '10

Hello, until now I have use postfix and dovecot on the same server. Now I want/must split this both systems (server1 - postfix, server2 - dovecot). I used dovecot auth system for postfix ## snip ## smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth ## snap ## but this does not work, if dovecot is not running on the same server. I did not find any information in postfix/dovecot documentation, how I could solve this problem smart. My only idea, but it looks like quick and dirty solution: On the postfix system a small dovecot systems runs only for postfix sasl via /var/spool/postfix/private/auth. (Or I use saslauthd with sql or imap) The postfix system (on server 1) delivers mails via transport map to the dovecot system. On the dovecot system postfix delivers this mails i.e. via ## snip ## dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -d ${recipient} ## snip ## to the mail boxes. Are there other ways, how I could solve this problem? My wish configuration: postfix sends the auth request via tcp/ip to the dovecot auth system and not via a socket. I use postfix 2.6 and dovecot 1.2.6. Best regards, thomas polnik.

2 1

[Dovecot] dovecot-auth stops responding
by Jonathan Siegle 05 Feb '10

05 Feb '10

Running dovecot 1.2.4(imap only) on AIX out of inetd. I accept passwords(PAM for auth) and kerberos tickets. Occasionally we see dovecot-auth stop responding. I just kill it off and another process is spawned which works fine. It doesn't look like it is hitting any ulimits(11MB for memory). I issued a kill -11 and ran it through the debugger. Here is what it says: dbx dovecot-auth core Type 'help' for help. [using memory image in core] reading symbolic information ... Segmentation fault in __fd_poll at 0x900000000117634 ($t1) 0x900000000117634 (__fd_poll+0x98) e8410028 ld r2,0x28(r1) (dbx) where __fd_poll(??, ??, ??) at 0x900000000117634 ioloop-poll.poll(__listptr = 0x00000001104dd330, __nfds = 145, __timeout = 1051), line 121 in "poll.h" io_loop_handler_run(ioloop = 0x000000011001bfb0), line 157 in "ioloop- poll.c" io_loop_run(ioloop = 0x000000011001bfb0), line 335 in "ioloop.c" main(argc = 1, argv = 0x0ffffffffffffad8), line 347 in "main.c" Here are my ulimits: ulimit -a time(seconds) unlimited file(blocks) 2097151 data(kbytes) 1048576 stack(kbytes) 65536 memory(kbytes) 65536 coredump(blocks) 2097151 nofiles(descriptors) 32768 Any help would be appreciated. Thanks, Jonathan

3 12

[Dovecot] Fatal: chdir( ) failed: Permission denied
by Vallo Kallaste 05 Feb '10

05 Feb '10

Hi Dovecot fails to chdir() into users home directory giving the following error: Oct 9 16:43:49 jura dovecot: dovecot: Fatal: chdir(/a/home/mina) failed: Permission denied (euid=1118 0(mina) egid=11332(devel) missing +x perm: /a/home) Oct 9 16:43:49 jura dovecot: dovecot: child 14441 (imap) returned error 89 (Fatal failure) The reason seems to be that user primary group is "devel" and directory /a/home has ACL which gives execute permission only to the users in "domain users" group. Now the catch is that the user _is_ member of "domain users" group and is happily accessing his home directory over CIFS(Samba) for long time. Also, the user has no problem entering his home directory when using shell access. It just seems like the user lost membership of a bunch of supplementary groups. The group membership info is coming from M$ PDC via winbind and NSS. We have few users and can change the users primary group and/or relax the /a/home directory ACL, but overall this is not right. Shall I shut up or can we hope for a fix or at least explanation? Thanks jura:/a # ls -la drwxrws--T+ 3 root domain admins 18 Oct 8 15:10 home jura:/a # getfacl home/ # file: home # owner: root # group: domain\040admins user::rwx group::rwx group:domain\040users:--x mask::rwx other::--- -- Vallo

4 8

[Dovecot] Question re: storing non mail files via IMAP
by Charles Marcus 05 Feb '10

05 Feb '10

Hey Timo, I have a question regarding how dovecot might behave if a mail client (like, for example, Thunderbird) decided to store some of its config files on the IMAP server itself. Would there be a decent way of doing this with dovecot that wouldn't cause problems for other clients that didn't know about these files? Maybe there's a way to define a special folder that dovecot knows about at the top level of each users mail location that can be used for this kind of thing? All I'm thinking of are certain config related files, so they would be small, and would only be downloaded when they didn't already exist - ie, when someone adds their existing account to a new PC, the first time they logged in, TB could simply download all of the config files, restart itself, and voila, your pre-configured TB is ready to go...

5 6

[Dovecot] mailutil question re: translating mbox folders to maildir
by Stewart Dean 04 Feb '10

04 Feb '10

I need mailutil in order to use the mbox to maildir translation routines that are posted in the Dovecot wiki, but there is no mailutil with the AIX image... mailutil is apparently built as part of Pine, and indeed I can see it in the build tree from my V4.6.1 Pine build, which I still have....OTOH, my version of Pine is not patched for maildir. Will the native pine mailutil work with mb2md or does it have be a mailutil built in a patched Pine :) tree? Oh Tannebaum, oh Tannebaum........ -- ==== Once upon a time, the Internet was a friendly, neighbors-helping-neighbors small town, and no one locked their doors. Now it's like an apartment in Bed-Stuy: you need three heavy duty pick-proof locks, one of those braces that goes from the lock to the floor, and bars on the windows.... ==== Stewart Dean, Unix System Admin, Bard College, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

1 0

[Dovecot] dovecot and AFS
by Per-Erik Persson 04 Feb '10

04 Feb '10

Scrolling thru the archives gives me a hint that there might be troubles with AFS together with dovecot and maildir especially the LDA Is this still an issue or should I prepare for spending time to solve it? If someone successfully got it to work in a small or large scale environment I would be happy to know about it. /Per-Erik Persson

3 6

[Dovecot] LMTP-Server: missing headers
by Andreas Schulze 04 Feb '10

04 Feb '10

Hello, I just installed dovecot2-beta2 and configured the lmtp-server + postfix (no virtual users) postfix: mail_version = 2.7-20100117 mailbox_transport = lmtp:unix:lmtp-server lmtp_assume_final = yes dovecot: service lmtp { executable = lmtp protocol = lmtp unix_listener /var/spool/postfix/lmtp-server { group = postfix mode = 0660 user = postfix } } Mail gets delivered to ~user/Maildir/ Feb 1 06:57:39 testhost dovecot: lmtp(8238): Connect from local Feb 1 06:57:39 testhost postfix/lmtp[8237]: 07108A3608: to=<sca(a)testhost.example.org>, orig_to=<root>, relay=testhost.example.org[lmtp-server], delay=0.67, delays=0.22/0.03/0.22/0.2, dsn=2.0.0, status=sent (250 2.0.0 <sca(a)testhost.example.org> lwjfEVNtZksuIAAA4eG3hw Saved) Feb 1 06:57:39 testhost dovecot: lmtp(8238, sca(a)testhost.example.org) lwjfEVNtZksuIAAA4eG3hw: msgid=<20100201055739.07108A3608(a)testhost.example.org>: saved mail to INBOX Second try: postfix using deliver postfix: mailbox_command = /usr/lib/dovecot/deliver log: Feb 1 07:21:08 testhost dovecot: lda(sca): msgid=<20100201062108.0D6D6A3608(a)testhost.example.org>: saved mail to INBOX Feb 1 07:21:08 testhost postfix/local[10039]: 0D6D6A3608: to=<sca(a)testhost.example.org>, orig_to=<sca>, relay=local, delay=0.13, delays=0.04/0.01/0/0.08, dsn=2.0.0, status=sent (delivered to command: /usr/lib/dovecot/deliver) In the first case there are *no* Return-Path and Delivered-To Headers. In the (most common) second case the *are* present. Why these Headers are not included while using the LMTP-Server? -- Andreas Schulze Internetdienste | P532 DATEV eG 90329 Nürnberg | Telefon +49 911 319-0 | Telefax +49 911 319-3196 E-Mail info @datev.de | Internet www.datev.de Sitz: 90429 Nürnberg, Paumgartnerstr. 6-14 | Registergericht Nürnberg, GenReg Nr.70 Vorstand Prof. Dieter Kempf (Vorsitzender) Dipl.-Kfm. Wolfgang Stegmann (stellvertretender Vorsitzender) Dipl.-Kfm. Michael Leistenschneider Jörg Rabe v. Pappenheim Dipl.-Vw. Eckhard Schwarzer Vorsitzender des Aufsichtsrates: Reinhard Verholen

11 13

Re: [Dovecot] Forcibly emptying a POP3 mailbox
by Răzvan Sandu 04 Feb '10

04 Feb '10

Steffen Kaiser wrote: > Well, I know that the client knows it has *successfully* downloaded > messages, but how does the server know? Just to sent down some > packets through the wire does not mean success. Thanks, I see... so the server knows nothing about the success or insuccess of retrieving messages. Only client knows, so only client may act. In that case, the only possibility is to have some automatic script that periodically "cleans" the "cur" subdirectories, as you suggested. However, not being a programmer at all, I'm far from being able to write an industrial-grade solution for this. ;-) Best regards, Răzvan

1 0

[Dovecot] Create New Plugin
by Alex Baule 04 Feb '10

04 Feb '10

i have a Little question.... I dont know to much the autoconf/automake...there is a command or something to do, to include my plugin in the Makefile for dovecot compile them when i compile the hole package ?? or i shoud go to the configure and makefile.am and put by hand ? I put my plugin in the plugins directory source tree.

2 4

Re: [Dovecot] [RFE] A way to encode passwords in the /etc/imap.passwd file
by Răzvan Sandu 04 Feb '10

04 Feb '10

@Pascal Volk Thanks for the algorithm you've provided ! Unfortuantely, I'm not a programmer myself and I don't feel confident to code such an utility (even if I perfectly understand your pseudocode). ;-) What I'm looking for is not even a hand-made script, but a production solution included in the stock dovecot RPM package itself - i.e a new, better form of the dovecotpw utility. Best regards, Răzvan

1 0

[Dovecot] Execute mailfilter after message move
by Kārlis Repsons 04 Feb '10

04 Feb '10

Hi, came here to ask, if there are any ideas about a possible Dovecot feature, which would allow execution of a specific mailfilter or other program after new message is *moved* in specified mail location? The practical benefit on my side would be, that there wouldn't be any need to do getmail cronjobs, which unnecessarily fill up logfiles... (primarily for easy spam learning and reporting)

2 1

[Dovecot] [dovecot] Problem with namespaces and dovecot -n
by Jonathan Siegle 03 Feb '10

03 Feb '10

I'm running dovecot 2.0 revision 10622:de9d6dae7fe5 on AIX. I'm trying to see both namespaces that I have listed in mail.conf. namespace private { separator = / prefix = inbox = no hidden = no location = maildir:%h/Maildir list = yes } namespace private { separator = / prefix = "#mbox/" location = mbox:%h:INBOX=/var/mail/%u inbox = yes hidden = no list = yes # for v1.1+ } Whichever namespace is last, I can see when running dovecot -n. Am I supposed to only see the last one printed? # 2.0.beta2: /usr/local/dovecot2.0beta2/etc/dovecot/dovecot.conf # OS: AIX 3 0001112AD300 auth_debug = yes auth_gssapi_hostname = $ALL auth_krb5_keytab = /etc/krb5/dovecot.keytab auth_mechanisms = plain gssapi disable_plaintext_auth = no listen = * login_greeting = Dovecot version 2 on tr27n12 ready. mail_full_filesystem_access = yes mail_location = mbox:%h:INBOX=/var/spool/mail/%Ju/%u mbox_lazy_writes = no mbox_write_locks = fcntl mmap_disable = yes namespace { hidden = no inbox = yes list = yes location = mbox:%h:INBOX=/var/mail/%u prefix = #mbox/ separator = / name = private } passdb { deny = no driver = pam master = no pass = no } With this config I have no folders. If I flip the namespaces in the config, I have no INBOX and can't login. Thanks, Jonathan

2 1

[Dovecot] [RFE] A way to encode passwords in the /etc/imap.passwd file
by Răzvan Sandu 03 Feb '10

03 Feb '10

Hello, Is this the proper place to suggest an enhancement for the stock dovecot package ? The enhancement would be the following: For the time being, the dovecotpw utility offers a standardised way to interactively encode a user password in a certain scheme, say: dovecotpw -s CRYPT Enter new passord: Re-enter new password: etc. Given a *valid* /etc/imap.passwd file (passwd-file authentication), dovecotpw should be able to process it non-interactively and output another text file with all {PLAIN} passwords converted in the specified <scheme>, i.e.: dovecotpwd -s CRYPT if=/etc/imap.passwd of=/etc/imap.passwd.converted where /etc/imap.passwd.converted have the previously {PLAIN} passwords converted in scheme CRYPT. Passwords that were previously encrypted in other schemes than {PLAIN} shoud remain untouched. That will allow quick securing of old legacy /etc/imap.passwd files. Thanks a lot, Răzvan

2 1