- dovecot - dovecot.org

[Dovecot] Cannot see new messages in Inbox
by Mark Farmer 16 Oct '05

16 Oct '05

Hi, just wondering if anyone has any suggestions on this. I'm having a rather odd problem in that I cannot see new emails in my IMAP inbox, this is true for both Thunderbird & Squirrelmail. I know the mails are arriving & being delivered correctly as I see the logs for postfix & procmail, and I can also list them from a command prompt on the Linux mail server. The really odd thing is that I can see new mail in other folders within the same mailbox (maildir) without issue, it's only the inbox that seems to be exhibiting the problem. Nothing has changed on the server and all permissions look fine. The only thing I can think of is that I reinstalled my other machine with Linux the other day & setup Thunderbird as normal - I didn't have any problem at the time but yesterday I noticed the problem. I have tried stopping & restarting the dovecot service a few times but this hasn't helped. I've had this running for months now & this just seems to have cropped up, very strange. Any thoughts anyone? farmorg

2 1

[Dovecot] How to set up a passwd file for virtual hosting
by Richard Freeman 16 Oct '05

16 Oct '05

Hi, Exim4 is running fine and I am trying to set up Dovecot 0.99 to handle virtual users (http://wiki.dovecot.org/moin.cgi/VirtualhostingWithExim) so I don't have to set up user accounts for each e-mail address I want to server out via pop3. I need to create a user and passd file, a bit like /etc/passwd, but in a different location for my dovecot virtual users. I can create a blank file such as /etc/dovecot/users (beware my increasing vi skills...) but how do I add users and passwords to this? Can I just type them in and separate them with colons? If so, how would I add a password to the file? I am happy using the passwd command which alters my user passwords in /etc/passwd. Can I use it or something similar to create the passwords for the users in my new file /etc/dovecot/users ? Is there any way I can use an MD5 hash or CRYPT format for the passwords? Yours, Richard

2 1

[Dovecot] FreeBSD Ports Issues
by Barry Jeung 16 Oct '05

16 Oct '05

Installed dovecot for the first time, using the FreeBSD port. Found 2 issues with the port, and I've only been able to resolve one of them. First of all, the port, (or perhaps dovecot) does work with mysql 4.1 encryption. I had to create a user with access to the mysql table, then do 'set password = old_password('password');' in order to get dovecot to talk to the server. The second issue, is that dovecot seems to be ignoring my user_query settings. I have the following in dovecot-sql.conf: password_query = SELECT password FROM mailbox WHERE username = '%u' user_query = SELECT maildir, 125 as uid, 125 as gid FROM mailbox WHERE username = '%u' The password query works, however the user query seems to default to something else, and no matter how I change the user_query line in dovecot-sql.conf, it uses the same query. Here's an excerpt from my logs: dovecot: Oct 11 03:19:30 Info: Dovecot v1.0.alpha3 starting up dovecot: Oct 11 03:19:31 Info: auth-worker(default): mysql: Connected to (null) (postfix) dovecot: Oct 11 03:19:35 Info: auth-worker(default): sql(user(a)example.com,1.2.3.4): query: SELECT password FROM mailbox WHERE username = 'user(a)example.com' dovecot: Oct 11 03:19:35 Info: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=5.6.7.8 rip=1.2.3.4 resp=AGJqZXVuZ0Bjb2JhbHQtaXQuY29tAHRlc3Q= dovecot: Oct 11 03:19:35 Info: auth(default): client out: OK 1 user=user(a)example.com dovecot: Oct 11 03:19:35 Info: auth(default): master in: REQUEST 1 13590 1 dovecot: Oct 11 03:19:35 Info: auth-worker(default): sql(user(a)example.com,1.2.3.4): SELECT home, uid, gid FROM users WHERE userid = 'user(a)example.com' dovecot: Oct 11 03:19:35 Error: auth-worker(default): sql(user(a)example.com,1.2.3.4): User query failed: Table 'postfix.users' doesn't exist dovecot: Oct 11 03:19:35 Info: imap-login: Internal login failure: user=<user(a)example.com>, method=PLAIN, rip=67.188.145.230, lip=209.25.157.150, TLS So obviously the query fails because that table doesn't exist. However that's not the query that I have in the configuration file. As a matter of fact, I have no idea where it's pulling that query from. Any pointers would be greatly appreciated.

4 3

[Dovecot] How to deny access from some ip or network
by Alisher Minarov 16 Oct '05

16 Oct '05

Version: dovecot-0.99.11-1.FC3.4 OS: Linux mail.server 2.6.9-1.667smp #1 SMP How I should call daemon in hosts.deny file to deny access from some ip or network? Or it can be do by dovecot itself?

5 5

[Dovecot] Dovecot on FC3 with Active Directory authentication
by Jeff Ramsey 16 Oct '05

16 Oct '05

I am building an IMAP server that uses Dovecot/Sendmail on FC3 to replace our POP server that uses Dovecot (via POP)/Sendmail on FC2. My new server is authenticating users via winbind/smb against my WIndows 2003 Active Directory. The authentication is working great. The problem come up when a user gets an email and has not ever logged into the IMAP server via SSH, local, or GDM, therefore that user has no home directory. /etc/pam.d/ssh, /etc/pam.d/login, and /etc/pam.d/gdm all have a line calling mkhomedir.so, which is using the /etc/skel home directory skeleton to create the user's home dir upon successful login, however, when I add that line to /etc/pam.d/dovecot, I get a permission denied error in /var/log/maillog. I'm assuming this is because dovecot is running as the user at this point, and therefore does not have the necessary permissions to create a folder under / home/DOMAIN/, which is where the home dir is supposed to be. If I manually create the folder, and set it's permissions, or if the user logs in via any of the before-mentioned methods, dovecot and sendmail work great. Does anyone else run a similar setup? If so, how did you overcome this problem? If not, can some Linux gurus recommend either altering the write permissions on the /home/DOMAIN directory, or should I try to call the mkhomdir app earlier in the process somehow? Any help would be appreciated. I'm trying to make this as seamless as possible. Basically, I can manually create all the home dirs well enough, but when I add a new user to the Active Directory, it would be nice if this part was automated as much as possible. Thanks, Jeff Ramsey MIS Administrator Tubafor Mill, Inc.

3 5

[Dovecot] Mapping username only for auth
by Andy Cravens 16 Oct '05

16 Oct '05

I am running Dovecot alpha 3 with authentication from the local shadow file. I'd like to change the authentication to use our radius server. I can probably do this through pam. The usernames on the mail server are set up as first initial + last name ( jdoe for John Doe ). The usernames on the radius server are the employee number. Is there a way to map the username to the employee number in dovecot before handing off the authentication to the radius server? I want the usernames on the mail server to remain first initial + last name. I don't mind maintaining a mapping file to go from username to employee number because I can automate this task. Has anybody done this?

2 1

[Dovecot] saslauthd/dovecot/root
by Andrew Instone-Cowie 16 Oct '05

16 Oct '05

Hi, I am using SMTP-AUTH over TLS with sendmail, to allow remote users to authenticate and send mail via my server, and this uses saslauthd to authenticate users. I have set up saslauthd with the "MECH=rimap" mechanism, so it uses the local IMAP server, Dovecot, for authentication. I want to do this because Dovecot is set up to use /etc/passwd for user credentials (so I don't have multiple password files to manage), and Dovecot handles restricting the range of valid UIDs (including blocking root). (Using the default MECH=shadow with saslauthd allows all users to authenticate, which I don't want) For real "normal" users, this all works fine - right password = user can relay mail, wrong password = relaying denied. So far so good. If I try to authenticate as root (which I want NEVER to work), with the wrong password, Dovecot correctly refuses to allow root IMAP access and saslauthd/sendmail denies the relay. But if I try to authenticate as root with the correct password (which I still want NOT to work!), Dovecot still refuses IMAP access, and puts this in the maillog: Oct 5 14:16:18 hadrian dovecot: Logins with UID 0 not permitted (user root) Oct 5 14:16:18 hadrian imap-login: Internal login failure: root [127.0.0.1] But saslauthd seems to treat this as a successful authentication and still allows root to relay email! So: Dovecot problem or saslauthd problem? Server is running CentOS 4.1, fully patched. Packages are dovecot-0.99.11-2.EL4.1, cyrus-sasl-2.1.19-5.EL4, sendmail-8.13.1-2. Thanks Andrew

2 1

[Dovecot] Confused
by Matt Juszczak 16 Oct '05

16 Oct '05

Hi all, I really don't know where to go from here. I've traced and pasted, but never heard responses.... I'm getting the following (see bottom of this email) in a single day of dmesg....most of the time the error message in the log file is something like: Oct 5 09:21:43 mail1 dovecot: imap(*****): file mbox-save.c: line 280 (mbox_save_init_file): assertion failed: (mbox->mbox_lock_type != F_RDLCK) Some of them also have something to do with storage space. Any ideas at all? Thanks :) Regards, Matt ---dmesg snip---- pid 20905 (imap), uid 34411: exited on signal 6 pid 42237 (imap), uid 33345: exited on signal 6 pid 42757 (imap), uid 33345: exited on signal 6 pid 43036 (imap), uid 33345: exited on signal 6 pid 41987 (imap), uid 32768: exited on signal 6 pid 99572 (imap), uid 35371: exited on signal 6 pid 99759 (imap), uid 35371: exited on signal 6 pid 49474 (imap), uid 33345: exited on signal 6 pid 82739 (imap), uid 33345: exited on signal 6 pid 67938 (imap), uid 33345: exited on signal 6 pid 68042 (imap), uid 33345: exited on signal 6 pid 68115 (imap), uid 33345: exited on signal 6 pid 68169 (imap), uid 33345: exited on signal 6 pid 68869 (imap), uid 33345: exited on signal 6 pid 72285 (imap), uid 31502: exited on signal 6 pid 98711 (imap), uid 32277: exited on signal 6 pid 99429 (imap), uid 32277: exited on signal 6 pid 36768 (imap), uid 33345: exited on signal 6 pid 38110 (imap), uid 33345: exited on signal 6 pid 38115 (imap), uid 34959: exited on signal 6 pid 53649 (imap), uid 34910: exited on signal 6 pid 53943 (imap), uid 34910: exited on signal 6 pid 70003 (imap), uid 33345: exited on signal 6 pid 23368 (imap), uid 31646: exited on signal 6 pid 59048 (imap), uid 34709: exited on signal 6 pid 59164 (imap), uid 34709: exited on signal 6 pid 59347 (imap), uid 34709: exited on signal 6 pid 13848 (imap), uid 33345: exited on signal 6

2 2

[Dovecot] Dovecot error: Unknown protocol 'imap\
by Paul E Virgo 16 Oct '05

16 Oct '05

First, thanks to Timo for the patch -- fixed missing protocol name error on my Solaris box. Now, I've moved the whole distro, part and parcel, to a Centos 4.0 Linux box, with the HOPE of getting it working there. But when I've set all of it up, I get the error message, mentioned in the 'Subject' line, in my /var/log/dovecot file. Any clues? PEV

2 1

[Dovecot] Dovecot pop3 locking up
by Neil Wilson 16 Oct '05

16 Oct '05

Hi guys and girls, I am having a problem with Dovecot. It seems like it's the dovecot auth daemon that is locking up(I'm guessing) I am running SuSe 9.3 Pro, and Dovecot 0.99.14 Everything works perfectly for a few days, and then eventually I end up with tons of what look to be "stale" processes.(I'm guessing roughly 300 like below.) 4204 ? S 0:00 dovecot-auth 24722 ? S 0:00 pop3-login 24723 ? S 0:00 pop3-login 24724 ? S 0:00 dovecot-auth 24921 ? S 0:00 dovecot-auth When I "telnet 127.0.0.1 110" I get a login, and I can type "User blabla" I get an "OK" then I type in "pass blabla" and then I don't get any response, and I have to kill my session with "Ctrl ]" and then "quit". I am using both POP3 and IMAP, but it seems to be only the POP3 daemon that dies. There are roughly 60 users on the network, and it dies after roughly 5 days of usage, and I then have to restart Dovecot by running /etc/init.d/dovecot stop and then start Any help would be appreciated. Thanks. -- Neil Wilson

2 2

[Dovecot] deliver: select destination folder
by Dominik Werder 16 Oct '05

16 Oct '05

Hello, I wanted a commandline switch within deliver to select the destination folder within an IMAP account, so I added the -f switch, heres the diff, the implementation is only "proof of concept" hehe, I didnt checked if theres any security riscs in doing this. Could we add something like this to dovecot? diff deliver.c.orig deliver.c 342c342 < const char *destination, *mail; --- > const char *destination, *mail, *folder; 355a356 > folder = NULL; 364a366,373 > } else if (strcmp(argv[i], "-f") == 0) { > /* destination folder */ > i++; > if (i == argc) { > i_fatal_status(EX_USAGE, > "Missing folder argument"); > } > folder = argv[i]; 378a388,391 > if (folder == NULL) { > folder = "INBOX"; > } > 449c462 < if (save_mail(storage, "INBOX", input) < 0) --- > if (save_mail(storage, folder, input) < 0) bye! Dominik

2 1

[Dovecot] Problem with pop3 and alpha3
by Alfonso Sparano 16 Oct '05

16 Oct '05

I don't know. I'm not tried with a real client but only with telnet. I would like to be sure that everything is correct before try with outlook/Eudora/thunderbird at all. -----Messaggio originale----- Da: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] Per conto di Andrew Hutchings Inviato: domenica 16 ottobre 2005 10.21 A: dovecot(a)dovecot.org Oggetto: Re: [Dovecot] Problem with pop3 and alpha3 On Sun, 2005-10-16 at 10:06 +0200, aspar(a)unisa.it wrote: > Hi all, I have a problem with dovecot-alpha3 and pop3 protocol (on a tru64 > 5.1a...) > > In my Maildir/cur there are 8144 mails and if I use pop3 protocol I receive in > the output 8146 line instead of 8144. The problem is that 2 mails are > duplicated . The output of "List" command is like: > > 1 51265 > 2 261783 > . > . > . > 2987 30291 > 2987 30291 (duplicated line) > 2988 16631 > .. > 4601 1231 > 4602 8921 > 4602 8921 (Another duplicated line) > 4603 1313 > . > > I've deleted dovecot.* and dovecot-uidlist in the Maildir path but the problem > remains. > > Suggest? Is a bug? > I've tried also to remove the first 1000 messages but the problem now is on the > mail number 2635 and not 1987 like I can think. > > Alfonso Is the client generating mail not found errors when this happens? If so it may be related to the problem I am seeing. Regards Andrew -- Andrew Hutchings (A-Wing) - Linux Guru Netserve Consultants - http://www.domaincity.co.uk/ Linux CDs and DVDs - http://www.linuxiso.co.uk/ Random quote 37: "Now, with penguins, (cuddly such), "contented" means it has either just gotten laid, or it's stuffed on herring. Take it from me, I'm an expert on penguins, those are really the only two options." - Linus Torvalds

1 0

[Dovecot] new to dovecot
by John O'Loughlin 15 Oct '05

15 Oct '05

Hello all I'm new to dovecot (and imap in general!) having installed only only today. My current set up is exim as MTA with procmail delivering /var/spool/mail/%user (which gets nfs exported). We also have a pop3 server running as well. I'm moving to new machine and though I'd look at dovecot and squirrelmail. In /etc/dovecot.conf I'm confused by the default_mail_env, what exactly are we trying to set here? We have $MAIL set already, so for example what does the line: default_mail_env = mbox:~/mail/:INBOX=/var/mail/%u try to set Cheers John

2 2

[Dovecot] Does anyone have SQL working in 1.03?
by Jonathan 15 Oct '05

15 Oct '05

This just isn't working for me. I've tried everything. Trailing the logs with debug and vebose... we connect fine === Oct 15 22:51:35 rsrr1 dovecot: Killed with signal 15 Oct 15 22:51:37 rsrr1 dovecot: Dovecot v1.0.alpha3 starting up Oct 15 22:51:38 rsrr1 dovecot: auth(default): pgsql: Connected to vmail === and then we die: === Oct 15 23:02:07 rsrr1 dovecot: auth(default): sql (username(a)domain.com,69.86.67.250) query: SELECT password FROM accounts WHERE local_part = 'username' AND domain = 'domain.com' AND active = 'Y' LIMIT 1; Oct 15 23:02:07 rsrr1 dovecot: auth(default): client out: OK 1 user=username(a)domain.com Oct 15 23:02:07 rsrr1 dovecot: auth(default): master in: REQUEST 24 33278 1 Oct 15 23:02:07 rsrr1 dovecot: auth(default): passwd (username(a)domain.com,69.86.67.250) unknown user Oct 15 23:02:07 rsrr1 dovecot: auth(default): passdb (username(a)domain.com,69.86.67.250) passdb didn't return userdb entries Oct 15 23:02:07 rsrr1 dovecot: auth(default): userdb (username(a)domain.com,69.86.67.250) user not found from userdb Oct 15 23:02:07 rsrr1 dovecot: auth(default): master out: NOTFOUND 24 Oct 15 23:02:07 rsrr1 dovecot: imap-login: Internal login failure: user=<username(a)domain.com>, method=PLAIN, rip=69.86.67.250, lip=66.250.131.114, TLS === I've tried both of these selects on the password: password_query = SELECT local_part || '@' || domain as user, password FROM accounts WHERE local_part = '%n' AND domain = '%d' AND a ctive = 'Y' ; password_query = SELECT password FROM accounts WHERE local_part = '%n' AND domain = '%d' AND active = 'Y' LIMIT 1; and this, and some variants, on the user user_query = SELECT home_dir AS home, uid, gid FROM accounts WHERE local_part = '%n' AND domain = '%d' LIMIT 1; all mimic the functionality of the conf example files.

2 1

[Dovecot] Same email recieved
by Bob Hope 14 Oct '05

14 Oct '05

Some of my users seem to be receiving the same e-mail over and over. This doesn't happen all the time, just once in a while it seems to get stuck in a loop. Is it possible that dovecot is the culprit here or is this a problem with something else? I'm running Postfix/amavisd/dovecot on Slackware 10.1. Regards, Savage

2 3

[Dovecot] 1.0a3: assert and core dump
by Jeff A. Earickson 14 Oct '05

14 Oct '05

Timo, A rare assert and core dump out of 1.0alpha3. My setup: Solaris 9, mbox format, using imap only. Built dovecot with gcc 4.0.1. The syslog for this was: Oct 14 11:57:56 emerald dovecot: [ID 107833 mail.info] imap-login: Login: user=<epmccull>, method=PLAIN, rip=137.146.210.59, lip=137.146.210.52, TLS Oct 14 11:58:56 emerald dovecot: [ID 107833 mail.info] imap-login: Login: user=<epmccull>, method=PLAIN, rip=137.146.210.59, lip=137.146.210.52, TLS Oct 14 11:59:03 emerald dovecot: [ID 107833 mail.error] imap(epmccull): Corrupted index cache file /home/students/e/epmccull/.imap/INBOX/dovecot.index.cache: invalid record size Oct 14 11:59:38 emerald dovecot: [ID 107833 mail.error] imap(epmccull): Corrupted index cache file /home/students/e/epmccull/.imap/INBOX/dovecot.index.cache: Cache record offset 1768 points outside file Oct 14 11:59:39 emerald dovecot: [ID 107833 mail.error] imap(epmccull): Corrupted index cache file /home/students/e/epmccull/.imap/INBOX/dovecot.index.cache: used_file_size too small Oct 14 11:59:39 emerald dovecot: [ID 107833 mail.error] imap(epmccull): file mbox-lock.c: line 518 (mbox_lock): assertion failed: (lock_type == F_RDLCK || mbox->mbox_lock_type != F_RDLCK) Attached is a gdb session on the core dump. Thanks. Jeff Earickson Colby College

1 0

[Dovecot] 1.0 alpha3 slower?
by Danel 14 Oct '05

14 Oct '05

Hi Is 1.0 alpha3 a bit slower than the dovecot-1.0.stable branch? Regards Daniel

6 9

[Dovecot] Message not
by Andrew Hutchings 13 Oct '05

13 Oct '05

Hi, I'm sure this is a bug fixed in CVS or something stupid I did in the config but here goes: I am getting at least one complaint a day about POP login customers getting 'Message not found' errors while getting their mail. The only thing I can find in the messages that could be related is: Oct 12 15:40:18 svr21 dovecot: pop3(user): Mailbox init failed top=0/0, retr=0/ del=0/0, size=0 It doesn't happen on a very high percentage of logins which makes me think its a locking problem of some kind. Any ideas? Regards Andrew -- Andrew Hutchings (A-Wing) - Linux Guru Netserve Consultants - http://www.domaincity.co.uk/ Linux CDs and DVDs - http://www.linuxiso.co.uk/ Random quote 186: "... the whole documentation is not unreasonably transportable in a student's briefcase." - John Lions describing UNIX 6th Edition

1 0

[Dovecot] dovecot won't launch
by Chad Cunningham 12 Oct '05

12 Oct '05

Hi, I downloaded the latest dovecot (1.0 alpha 3) and tried numerous installs which get me nothing. No errors, no crashes, no segfaults and no running dovecot. It just seems to silently exit. I was trying to build with mysql support but I've also tried a plain old install, just configure, make install, etc. I get nada. strace doesn't show anything, at least as far as I can tell. No messages are logged. No output to the console. Any ideas? My only guess, no idea if it matters, is that dovecot doesn't like the fact that this is a VPS (User Mode Linux, Fedora Core 3). But I don't see any reason why not, other mail servers are pretty happy... Here's the strace: -bash-3.00# strace dovecot execve("/usr/local/sbin/dovecot", ["dovecot"], [/* 17 vars */]) = 0 uname({sys="Linux", node="monkey", ...}) = 0 set_tid_address(0) = -1 ENOSYS (Function not implemented) brk(0) = 0x805eed0 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=24400, ...}) = 0 old_mmap(NULL, 24400, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40017000 close(3) = 0 open("/lib/libssl.so.4", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20\226"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=211948, ...}) = 0 old_mmap(NULL, 212692, PROT_READ|PROT_EXEC, MAP_PRIVATE| MAP_DENYWRITE, 3, 0) = 0x4001d000 old_mmap(0x4004e000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE| MAP_FIXED|MAP_DENYWRITE, 3, 0x31000) = 0x4004e000 close(3) = 0 open("/lib/libcrypto.so.4", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0P\251\2"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=935112, ...}) = 0 old_mmap(NULL, 953048, PROT_READ|PROT_EXEC, MAP_PRIVATE| MAP_DENYWRITE, 3, 0) = 0x40051000 old_mmap(0x40125000, 69632, PROT_READ|PROT_WRITE, MAP_PRIVATE| MAP_FIXED|MAP_DENYWRITE, 3, 0xd3000) = 0x40125000 old_mmap(0x40136000, 15064, PROT_READ|PROT_WRITE, MAP_PRIVATE| MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40136000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240S\1"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1504728, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4013a000 old_mmap(NULL, 1219876, PROT_READ|PROT_EXEC, MAP_PRIVATE| MAP_DENYWRITE, 3, 0) = 0x4013b000 mprotect(0x4025e000, 27940, PROT_NONE) = 0 old_mmap(0x4025f000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE| MAP_FIXED|MAP_DENYWRITE, 3, 0x123000) = 0x4025f000 old_mmap(0x40263000, 7460, PROT_READ|PROT_WRITE, MAP_PRIVATE| MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40263000 close(3) = 0 open("/usr/lib/libgssapi_krb5.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\360J\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=80948, ...}) = 0 old_mmap(NULL, 79792, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40265000 old_mmap(0x40278000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE| MAP_FIXED|MAP_DENYWRITE, 3, 0x13000) = 0x40278000 close(3) = 0 open("/usr/lib/libkrb5.so.3", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`\370\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=413704, ...}) = 0 old_mmap(NULL, 413000, PROT_READ|PROT_EXEC, MAP_PRIVATE| MAP_DENYWRITE, 3, 0) = 0x40279000 old_mmap(0x402dc000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE| MAP_FIXED|MAP_DENYWRITE, 3, 0x63000) = 0x402dc000 close(3) = 0 open("/lib/libcom_err.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\354\10"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=5668, ...}) = 0 old_mmap(NULL, 8636, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x402de000 old_mmap(0x402e0000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE| MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x402e0000 close(3) = 0 open("/usr/lib/libk5crypto.so.3", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`2\0\000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=134640, ...}) = 0 old_mmap(NULL, 134560, PROT_READ|PROT_EXEC, MAP_PRIVATE| MAP_DENYWRITE, 3, 0) = 0x402e1000 old_mmap(0x40301000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE| MAP_FIXED|MAP_DENYWRITE, 3, 0x20000) = 0x40301000 close(3) = 0 open("/lib/libresolv.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\360#\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=79572, ...}) = 0 old_mmap(NULL, 80040, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40302000 mprotect(0x40311000, 18600, PROT_NONE) = 0 old_mmap(0x40312000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE| MAP_FIXED|MAP_DENYWRITE, 3, 0xf000) = 0x40312000 old_mmap(0x40314000, 6312, PROT_READ|PROT_WRITE, MAP_PRIVATE| MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40314000 close(3) = 0 open("/lib/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260\v\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=15208, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40316000 old_mmap(NULL, 12388, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40317000 old_mmap(0x40319000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE| MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x40319000 close(3) = 0 open("/usr/lib/libz.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260\25"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=62152, ...}) = 0 old_mmap(NULL, 65028, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x4031b000 old_mmap(0x4032a000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE| MAP_FIXED|MAP_DENYWRITE, 3, 0xe000) = 0x4032a000 close(3) = 0 mprotect(0x40319000, 4096, PROT_READ) = 0 mprotect(0x40312000, 4096, PROT_READ) = 0 mprotect(0x4025f000, 8192, PROT_READ) = 0 mprotect(0x40015000, 4096, PROT_READ) = 0 munmap(0x40017000, 24400) = 0 time(NULL) = 1129055371 brk(0) = 0x805eed0 brk(0x807fed0) = 0x807fed0 brk(0x8080000) = 0x8080000 uname({sys="Linux", node="monkey", ...}) = 0 getpid() = 8518 geteuid32() = 0 open("/usr/local/etc/dovecot.conf", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=29028, ...}) = 0 pread(3, "## Dovecot 1.0 configuration fil"..., 2048, 0) = 2048 pread(3, "and RSA parameters.\n#ssl_paramet"..., 2019, 2048) = 2019 pread(3, "d in it\'s own process (yes), or "..., 2017, 4067) = 2017 pread(3, "es\n# (eg. shared mailboxes or if"..., 1977, 6084) = 1977 pread(3, "d in\n# doc/mail-storages.txt. Th"..., 1990, 8061) = 1990 pread(3, "erent namespaces which you want "..., 2014, 10051) = 2014 pread(3, "ll with Linux and FreeBSD.\n# But"..., 1999, 12065) = 1999 pread(3, "le. Works with NFS too if lockd "..., 2018, 14064) = 2018 pread(3, "se you don\'t get core dumps. It "..., 2018, 16082) = 2018 pread(3, "ss never abort IDLE command, so "..., 2015, 18100) = 2015 pread(3, "us (<= 2.1.3) : %u\n # Cyrus"..., 2040, 20115) = 2040 pread(3, "of allowed characters in usernam"..., 2041, 22155) = 2041 pread(3, "nd immediately close PAM session"..., 2013, 24196) = 2013 pread(3, "#userdb sql {\n # Path for SQL"..., 2046, 26209) = 2046 pread(3, "r/run/dovecot-auth-master\n# "..., 2031, 28255) = 773 pread(3, "", 1258, 29028) = 0 close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/nsswitch.conf", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1696, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40017000 read(3, "#\n# /etc/nsswitch.conf\n#\n# An ex"..., 4096) = 1696 read(3, "", 4096) = 0 close(3) = 0 munmap(0x40017000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=24400, ...}) = 0 old_mmap(NULL, 24400, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40017000 close(3) = 0 open("/lib/libnss_files.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`\33\0 \000"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=47244, ...}) = 0 old_mmap(NULL, 41628, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x4032b000 old_mmap(0x40334000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE| MAP_FIXED|MAP_DENYWRITE, 3, 0x8000) = 0x40334000 close(3) = 0 mprotect(0x40334000, 4096, PROT_READ) = 0 munmap(0x40017000, 24400) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=1274, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40017000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 1274 close(3) = 0 munmap(0x40017000, 4096) = 0 access("/usr/local/libexec/dovecot/imap", X_OK) = 0 access("/etc/ssl/certs/dovecot.pem", R_OK) = 0 access("/etc/ssl/private/dovecot.pem", R_OK) = 0 getegid32() = 0 lstat64("/usr/local/var/run/dovecot", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0 open("/usr/local/var/run/dovecot", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0 close(3) = 0 lstat64("/usr/local/var/run/dovecot", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0 open(".", O_RDONLY|O_LARGEFILE) = 3 open("/usr/local/var/run/dovecot/login", O_RDONLY|O_LARGEFILE| O_NOFOLLOW) = 4 fchdir(4) = 0 open("/dev/null", O_RDONLY|O_NONBLOCK|O_DIRECTORY) = -1 ENOTDIR (Not a directory) open(".", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = 5 fstat64(5, {st_mode=S_IFDIR|0750, st_size=4096, ...}) = 0 fcntl64(5, F_SETFD, FD_CLOEXEC) = 0 getdents64(5, /* 2 entries */, 4096) = 48 getdents64(5, /* 0 entries */, 4096) = 0 close(4) = 0 close(5) = 0 fchdir(3) = 0 close(3) = 0 lstat64("/usr/local/var/run/dovecot/login", {st_mode=S_IFDIR|0750, st_size=4096, ...}) = 0 open("/usr/local/var/run/dovecot/login", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFDIR|0750, st_size=4096, ...}) = 0 close(3) = 0 lstat64("/usr/local/var/run/dovecot/login", {st_mode=S_IFDIR|0750, st_size=4096, ...}) = 0 access("/usr/local/libexec/dovecot/imap-login", X_OK) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=1274, ...}) = 0 old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40017000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 1274 close(3) = 0 munmap(0x40017000, 4096) = 0 access("/usr/local/libexec/dovecot/dovecot-auth", X_OK) = 0 open("/dev/null", O_RDONLY|O_LARGEFILE) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 dup(3) = 4 fcntl64(4, F_GETFD) = 0 fcntl64(4, F_SETFD, FD_CLOEXEC) = 0 socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 5 setsockopt(5, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 setsockopt(5, SOL_SOCKET, SO_KEEPALIVE, [1], 4) = 0 bind(5, {sa_family=AF_INET, sin_port=htons(143), sin_addr=inet_addr ("0.0.0.0")}, 16) = 0 getsockname(5, {sa_family=AF_INET, sin_port=htons(143), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0 listen(5, 8) = 0 fcntl64(5, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(5, F_SETFL, O_RDWR|O_NONBLOCK) = 0 fcntl64(5, F_GETFD) = 0 fcntl64(5, F_SETFD, FD_CLOEXEC) = 0 socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 6 setsockopt(6, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 setsockopt(6, SOL_SOCKET, SO_KEEPALIVE, [1], 4) = 0 bind(6, {sa_family=AF_INET, sin_port=htons(993), sin_addr=inet_addr ("0.0.0.0")}, 16) = 0 getsockname(6, {sa_family=AF_INET, sin_port=htons(993), sin_addr=inet_addr("0.0.0.0")}, [16]) = 0 listen(6, 8) = 0 fcntl64(6, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(6, F_SETFL, O_RDWR|O_NONBLOCK) = 0 fcntl64(6, F_GETFD) = 0 fcntl64(6, F_SETFD, FD_CLOEXEC) = 0 dup2(4, 0) = 0 dup2(4, 1) = 1 dup2(4, 2) = 2 fork() = 8519 exit_group(0) = ?

4 3

[Dovecot] Building dovecot with SSL support on Solaris
by Christian Schmidt 10 Oct '05

10 Oct '05

Hi all, I'm just trying to build dovecot-1.0.alpha3 on a Solaris 9 machine with SSL support. No matter which options I call ./configure with - it always results in: Install prefix ...................... : /usr/local File offsets ........................ : 64bit I/O loop method ..................... : poll File change notification method ..... : none Building with SSL support ........... : no <-- ! Building with IPv6 support .......... : yes Building with pop3 server ........... : yes Building with mail delivery agent .. : yes Building with user database modules . : static passdb passwd passwd-file checkpassword (modules) Building with password lookup modules : passwd passwd-file shadow pam checkpassword (modules) Some more details: $ uname -a SunOS ns 5.9 Generic_117171-08 sun4u sparc SUNW,Sun-Fire-280R $ /usr/local/ssl/bin/openssl version OpenSSL 0.9.7e 25 Oct 2004 On another system, the build succeeds - including SSL support: $ uname -a SunOS excalibur 5.9 Generic_117171-08 sun4u sparc SUNW,Sun-Blade-100 $ /usr/local/ssl/bin/openssl version OpenSSL 0.9.7d 17 Mar 2004 I have tried lots of hints Google found in the mailing list archives, but none of them succeeded. I'm looking forward to getting any further hints. If you need some further information, I will post it. Regards & thanks in advance, Christian -- Alle Dinge geschehen aus Notwendigkeit. Es gibt in der Natur kein Gutes und kein Schlechtes. -- Baruch de Spinoza

7 11

[Dovecot] Backup Maildir
by Gabe Granger 09 Oct '05

09 Oct '05

Hi All, I'm currently doing nightly full backups of /home. I'm not sure if a full back up is the best way to do backups. I know with my fileserver i do weekly full backup and daily incremental which would file on those type of files. I guess my question to the group is, how do you guys backup Maildir? whats the best way of doing it? -- Gabe Granger Pancentric results-driven communications and e-solutions +44 (0) 20 8877 0230 http://www.pancentric.com

8 9

[Dovecot] SOLVED: chdir failed: Permission denied
by Joe Sislow 09 Oct '05

09 Oct '05

Ok, so if anyone runs into a problem where dovecot reports chdir(/home/BLAH) failed with uid NNN: Permission denied in Fedora Core 4 or otherwise, it seems to be a SELinux problem. Turn OFF SELinux and the problem goes away.

2 1

[Dovecot] time out error and email with attachments
by Roberto Cipollini 09 Oct '05

09 Oct '05

I'm facing some problem with emails and attachments. I'm not sure it's dealing with MTU (it is set to the maximum number before a fragmentation occurs). I have no errors from pop3, but the following message is the best I can show you just to understand my problem. The log shows this: "imap(roberto.cipollini(a)allmediasolution.com): Oct 04 17:35:03 Error: Timeout while waiting for release of exclusive fcntl() lock for index file /mail/allmediasolution.com/roberto.cipollini/.INBOX/.imap.index " I think that the pop3 process is locking the index file (thunderbird was waiting to download the file) and the imap (i tried to get the file from webmail) is going time out. Can anyone tell me how to fix the time out? any suggestion? do you need more information/logs? can I try different setting in dovecot conf? thanks for any kind of help. Roberto

2 3

[Dovecot] 1.0.a3 does not start on FreeBSD 5.21
by Adamson H 09 Oct '05

09 Oct '05

Hi, This morning I portupgraded dovecot 0.99.14 to 1.0.a3 on two of my FreeBSD servers and found that the new dovecot refused to start on FreeBSD 5.21 server. However, it works ok on FreeBSD 5.4. Please help me with the FreeBSD 5.21 one. #uname -a FreeBSD fileserver.xxx.local 5.2.1-RELEASE-p14 FreeBSD 5.2.1-RELEASE- p14 #3: Sun Aug 7 13:24:38 CST 2005 xxx@xxx.xxx.com:/usr/obj/usr/src/sys/GATEWAY i386 ## /etc/rc.conf dovecot_enable="YES" ## /usr/local/etc/dovecot.conf ssl_disable = yes (I only changed the above line in dovecot.conf.sample.) ## ports fileserver# make clean ===> Cleaning for libiconv-1.9.2_1 ===> Cleaning for libtool-1.5.20 ===> Cleaning for perl-5.8.7 ===> Cleaning for cyrus-sasl-2.1.21 ===> Cleaning for openssl-0.9.8_1 ===> Cleaning for dovecot-1.0.a3 ## error messages Oct 9 11:50:01 fileserver dovecot: Dovecot v1.0.alpha3 starting up Oct 9 11:50:02 fileserver dovecot: Login process died too early - shutting down Oct 9 11:50:02 fileserver dovecot: child 42837 (login) returned error 89 Oct 9 11:50:02 fileserver dovecot: child 42836 (login) returned error 89 Oct 9 11:50:02 fileserver dovecot: child 42838 (login) returned error 89 Oct 9 11:50:02 fileserver dovecot: child 42835 (auth) returned error 89 Thanks in advance for your help. Adamson Huang

1 0

[Dovecot] chdir failed: Permission denied
by Joe Sislow 09 Oct '05

09 Oct '05

Hi there, Upgrading to Fedora Core 4 from an old server running Red Hat 7.3. I'm moving accounts over by hand, and I'm having the following error crop up for *everyone*. chdir(/home/BLAH) failed with uid 500: Permission denied Now, that UID is correct, the user has that access, and there are no permissions problems changing to that directory. I've got the mail in /var/mail/XXX for each user as a simple mbox. I was browsing through the code to check for what *exactly* dovecot is doing when it's trying to change directory there. The error reporting is a bit spotty. It could be that it can't change to that directory (unlikely). It could be that something in that path is a problem (also unlikely, as the /home directory is world readable and executable), or, it could have something to do with a file or directory it's trying to create. I'm not sure. Could someone let me in on what files or directories that dovecot tries to create by default? This permission denied error doesn't make any sense (I created a brand new user with nothing there, made all of his directories readable/writeable, and executable by EVERYONE, and it STILL gives me this error.

1 0

[Dovecot] passdb error
by Richard Wilkinson 08 Oct '05

08 Oct '05

I have just installed Dovecot on Redhat 9 system when starting dovecot I get the following error Unknown passdb driver 'pam' This is a new venture for me so any help would be appreciated Thanks rw

2 1

[Dovecot] dovecot 1.0alpha3 passdb
by Karl Chen 08 Oct '05

08 Oct '05

I upgraded dovecot from 0.99.20050712-2 to 1.0.alpha3-1 (Debian testing). In /etc/dovecot.conf I had: passdb = passwd-file /etc/imap.passwd I modified dovecot.conf from 1.0alpha3 to have: passdb passwd-file { # Path for passwd-file args = /etc/imap.passwd } Is that correct? Authentication no longer works, and /var/log/mail.info shows: Oct 7 22:35:39 XXX dovecot: auth(default): passdb(XXX,XXX): passdb didn't return userdb entries Oct 7 22:35:39 XXX dovecot: auth(default): userdb(XXX,XXX): user not found from userdb Oct 7 22:35:39 XXX dovecot: imap-login: Internal login failure: user=<XXX>, method=PLAIN, rip=XXX, lip=XXX, TLS Help, please. -- Karl 2005-10-07 22:39

2 1

[Dovecot] Still Seeing Some SIGALRM's
by Todd Burroughs 07 Oct '05

07 Oct '05

I'm still seeing some of these in the CVS version as of Oct. 6: dovecot: Oct 07 11:09:42 Error: child 2410 (imap) killed with signal 14 It's happening quite a bit less since this fix: 2005-09-30 18:25 Timo Sirainen <tss(a)iki.fi> * src/lib-index/mail-index-lock.c: Don't leak alarm() with in-memory indexes Todd

1 0

[Dovecot] Starting Dovecot at the boot time.
by SUPER POSTFIX 07 Oct '05

07 Oct '05

Dear All, I am new to Dovecot, so please help me to overcome the following problem. I have installed postfix + Dovecot in Redhat EL 3. I have installed them from the source codes. Problem is that how can I start Dovecot at the boot time? Regards Indrajith

2 2

[Dovecot] Vacation How To
by Nicholas Winn 07 Oct '05

07 Oct '05

I need help with vacation support for dovecot-stable on a Sendmail / Procmail / Dovecot using MailDir. What do I need to use to setup vacation messages? -- Best Regards, Nicholas Winn www.streamfire.net <http://www.streamfire.net> 404.667.2253 "If you make it idiot proof, someone will make a better idiot" - Taz

1 0

[Dovecot] Dovecot Setup as just a local IMAP server.
by David Terei 06 Oct '05

06 Oct '05

Hey All, Id just like to start by thanking Timo Sirainen and any others that helped produce such a great IMAP server, it was a breeze to set up with no previous experience in mail servers. What I am trying to do is setup a spare computer to run Dovecot and that It stores all my email from my accounts which are all accessed through POP. This way instead of being tied to one mail client (and hence OS and Computer) I just set up my mail client to access Dovecot and then I'm done. So I am trying to set up an IMAP server to store my emails instead of just storing them on my local hard disk really. Now so far Ive set up Dovecot and Its working fine, but How would I get my email accounts mail to be placed in the Inbox of my IMAP account? I'm think I would need to use either fetchmail or getmail to grab my mail. After that do these programs just save it in the appropriate IMAP folder on disk (which would be new?) or do I need a MTA such as qmail setup and fetchmail or getmail passes the email to the MTA which just transfers it locally on the same computer? So any help would be greatly appreciated as well as advice on which software to use, the getmail site attacks fetchmail quite strongly, but I'm not sure of its performance being written in Python as I'm running on an old Pentium MMX(100MHz) using OpenBSD 3.7. Sorry for the long email I never can seem to keep them short :) Cheers, David Terei

4 3

[Dovecot] extra characters after mailbox names
by Paul 06 Oct '05

06 Oct '05

After installing alpha3, when I view a list of my IMAP mailboxes in Pine 4.64 on Linux, several of the mailbox names are followed by odd characters: ., ~, and _. So the list of mailboxes looks like: INBOX saved_ sent-mail~ Biz Service. Home_ and so forth. The distribution of the characters remains the same throughout the Pine session, but is different every time I restart Pine. It doesn't happen in Pine 4.63 or any other client, but I associate it with Dovecot rather than Pine because it started exactly when I upgraded Dovecot today, rather than five days ago when I upgraded Pine. Paul

1 1

RE: [Dovecot] Starting Dovecot at the boot time.
by Diehl, Brian 06 Oct '05

06 Oct '05

chkconfig --level 345 dovecot on you can also do a ntsysv [runlevel] ________________________________ From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] On Behalf Of SUPER POSTFIX Sent: Thursday, October 06, 2005 7:30 AM To: dovecot(a)dovecot.org Subject: [Dovecot] Starting Dovecot at the boot time. Dear All, I am new to Dovecot, so please help me to overcome the following problem. I have installed postfix + Dovecot in Redhat EL 3. I have installed them from the source codes. Problem is that how can I start Dovecot at the boot time? Regards Indrajith

1 0

[Dovecot] Starting Dovecot at the boot time.
by SUPER POSTFIX 06 Oct '05

06 Oct '05

Dear All, I am new to Dovecot, so please help me to overcome the following problem. I have installed postfix + Dovecot in Redhat EL 3. I have installed them from the source codes. Problem is that how can I start Dovecot at the boot time? Regards Indrajith

1 0

[Dovecot] Dovecot and dracd?
by Dominik Werder 06 Oct '05

06 Oct '05

Hello everyone, how can I get dovecot to work with drac? I have already compiled this little module from the wiki, but I dont know how to tell dovecot to load the module... thanks! Dominik

1 1

[Dovecot] Still crashing with test-80
by Matt Juszczak 05 Oct '05

05 Oct '05

Here is the log over a 12 hour period: pid 91923 (pop3), uid 25039: exited on signal 6 pid 98265 (pop3), uid 25039: exited on signal 6 pid 95547 (pop3), uid 25039: exited on signal 6 pid 235 (pop3), uid 25039: exited on signal 6 pid 239 (pop3), uid 25039: exited on signal 6 pid 318 (pop3), uid 25039: exited on signal 6 pid 386 (pop3), uid 25039: exited on signal 6 pid 415 (pop3), uid 25039: exited on signal 6 pid 427 (pop3), uid 25039: exited on signal 6 pid 434 (pop3), uid 25039: exited on signal 6 pid 468 (pop3), uid 25039: exited on signal 6 pid 653 (dovecot-auth), uid 0: exited on signal 6 (core dumped) Here is the GDB Backtrace: orion# gdb /usr/local/libexec/dovecot/imap dovecot-auth.core GNU gdb 6.1.1 [FreeBSD] Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-marcel-freebsd"...(no debugging symbols found)... warning: core file may not match specified executable file. Core was generated by `dovecot-auth'. Program terminated with signal 6, Aborted. #0 0x181327af in ?? () (gdb) bt full #0 0x181327af in ?? () No symbol table info available. #1 0x18127856 in ?? () No symbol table info available. #2 0x0000028d in ?? () No symbol table info available. #3 0x00000006 in ?? () No symbol table info available. #4 0x00000000 in ?? () No symbol table info available. #5 0x00000000 in ?? () No symbol table info available. #6 0x00000286 in ?? () No symbol table info available. #7 0x181abf4c in ?? () No symbol table info available. #8 0xbfbfea78 in ?? () No symbol table info available. #9 0x1819b0df in ?? () No symbol table info available. #10 0x00000006 in ?? () No symbol table info available. #11 0xbfbfea48 in ?? () No symbol table info available. #12 0x00000000 in ?? () No symbol table info available. #13 0x1819b0aa in ?? () No symbol table info available. #14 0x00000001 in ?? () No symbol table info available. #15 0x18095400 in ?? () No symbol table info available. #16 0xffffffdf in ?? () No symbol table info available. #17 0xffffffff in ?? () No symbol table info available. #18 0xffffffff in ?? () No symbol table info available. #19 0xffffffff in ?? () ---Type <return> to continue, or q <return> to quit--- No symbol table info available. #20 0x18072a11 in ?? () No symbol table info available. #21 0x18095000 in ?? () No symbol table info available. #22 0x00000150 in ?? () No symbol table info available. #23 0x0807a000 in mail_cache_header_fields_read () No symbol table info available. #24 0x08071000 in istream_raw_mbox_next () No symbol table info available. #25 0x00000000 in ?? () No symbol table info available. #26 0x080710d0 in istream_raw_mbox_seek () No symbol table info available. #27 0x083c1ac0 in ?? () No symbol table info available. #28 0xbfbfea98 in ?? () No symbol table info available. #29 0x0805efd4 in imap_thread () No symbol table info available. Previous frame inner to this frame (corrupt stack?) (gdb) Thanks in advance for any help anyone can provide. -Matt

3 6

[Dovecot] I need to enable percent hack in dovecot logins
by Eero Volotinen 05 Oct '05

05 Oct '05

I am using dovecot with vpopmail and qmail and problems is percent hack that works with qmail-pop3d does not work with dovecot. So login works like that: firstname.lastname%domain.ext I need that function to work with dovecot too, and I am using stable 0.99.x series of dovecot. Problem is that some Apple machines client can't use at-symbol in their login names. So, where I need to hack sources to convert % -> @ to get login working. By default percent-hack does not work with dovecot. Any help? Thanks. -- Eero

2 5

[Dovecot] Re: partial sync?
by Paul 05 Oct '05

05 Oct '05

Jim Tittsler asked: > I haven't encountered that one. Does it persist? I've seen it four times now in the five hours since the upgrade. Never twice in the same mailbox, for what that's worth. I'll keep an eye on it. Paul

1 0

[Dovecot] Changing pop3_uidl_format
by Jeff Simmons 05 Oct '05

05 Oct '05

I recently set up an OpenBSD - Dovecot mail server for a client. Naturally (according to Murphy's Law) they want to use Outlook 2003, pop3s, and leave messages on the server. And just as naturally, the UIDLs don't seem to be working, and when they download mail, they get EVERY email stored on the server, not just the new ones. Other than switching them over to IMAP, I found the following in the Wiki documentation: #POP3 UIDL format to use. You can use following variables: # %v - Mailbox UIDVALIDITY # %u - Mail UID # %m - MD5 sum of the mailbox headers in hex (mbox only) # %f - filename (maildir only) #If you want UIDL compatibility with other POP3 servers, use: # UW's ipop3d : %08Xv%08Xu # Courier version 0 : %f # Courier version 1 : %u # Courier version 2 : %v-%u # Cyrus (<= 2.1.3) : %u # Cyrus (>= 2.1.4) : %v.%u #Note that Outlook 2003 seems to have problems with %v.%u format which is #Dovecot's default, so if you're building a new server it would be a good #idea to change this. %08Xu%08Xv should be pretty fail-safe. pop3_uidl_format = %v.%u So my question is, what happens if I just change pop3_uidl_format to %08Xu%08Xv and restart the server? Will it just change things over to the way I want them, or will it blow up all the existing mail already being stored there? Inquiring minds want to know. Thanks for any help you can provide. -- Jeff Simmons jsimmons(a)goblin.punk.net Simmons Consulting - Network Engineering, Administration, Security "It was on fire when I got here."

2 1

[Dovecot] partial sync?
by Paul Adams 05 Oct '05

05 Oct '05

I just installed the latest alpha on Debian Sarge and am getting a lot of this sort of error: Oct 4 16:18:58 tarsier dovecot: imap-login: Disconnected: rip=70.209.254.178, lip=192.168.50.105, TLS Oct 4 16:19:04 tarsier dovecot: imap(jeff): mbox sync: UID inserted in the middle of mailbox /home/jeff/mail/Junk (329 > 274, seq=2, idx_msgs=55) Oct 4 16:19:07 tarsier dovecot: imap(jeff): mbox sync: UID inserted in the middle of mailbox /home/jeff/mail/inbox (4813 > 2434, seq=2, idx_msgs=1771) and Oct 4 16:25:40 tarsier dovecot: imap-login: Disconnected: Inactivity: rip=70.209.254.178, lip=192.168.50.105, TLS Oct 4 16:26:33 tarsier dovecot: imap(jeff): UIDs broken with partial sync in mbox file /home/jeff/mail/spam which I never saw before. What does it mean? Should I be concerned? Paul

2 1

[Dovecot] using local-part delimiters in LDA delivery?
by OpenMacNews 03 Oct '05

03 Oct '05

hi all, i've exim 4.53RC2 + dovecot-cvs on OSX 10.4.2. i'm working on implementing recipient-delimiters for delivery from exim to a user's imap store using dovecot's cvs-lda. reading on the wiki (Jakob's latest comments?): " ... the part after the delimiter is passed to the lda as an additional parameter. so dovecot-lda should handle that parameter and leave the separator handling to the MTA. The MTA has to handle it anyway." it looks likes it's possible ... with appropriate changes in exim to my router: dovecot_localuser: driver = accept domains = +local_domains local_part_suffix = +* local_part_suffix_optional transport = dovecot_lda and transport: dovecot_lda: driver = pipe command = /.../deliver \ -c /.../dovecot-deliver.conf \ -d $local_part@$domain message_prefix = "" message_suffix = "" delivery_date_add envelope_to_add return_path_add log_output user = MY_MAIL_USER i'd like to be able to build delivery conditions in dovecot so that, e.g. mail to: bob(a)mydomain.com is delivered to "bob"'s default INBOX. but, mail to: bob+spam(a)mydomain.com is delivered to any specified (either a server-wide common relative path, or a user-specified) SUBFOLDER, say "bob/INBOX/.../.../spam_to_look_at" defined by a dovecot-rule invoked by the delimiter "spam" ... this is a little different than the approach Mark mentioned of delivering directly to folder_name specified by the local-part-after-delimiter ... questions: (1) until the two conf files merge, i'm guessing there needs to be some conditional logic in dovecot-deliver.conf rather than in dovecot.conf. correct? or should i be thinking SIEVE rules? (2) exactly WHAT "additional part" do i grab in dovecot? thx! richard

3 5

[Dovecot] can't access dovecot IMAP account w/TBird ... ok w/ other clients
by OpenMacNews 03 Oct '05

03 Oct '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi all, i'm using dovecot --version 1.0.alpha3 dovecot --build-options Build options: ioloop=poll openssl postgresql Passdb: checkpassword pam passwd passwd-file sql Userdb: checkpassword passdb passwd passwd-file sql static on OSX 10.4.2. i've set up for maildir: format PLAIN text AUTH, w/ "disable_plaintext_auth = yes" TLS support Private/, Public/ Shared/ namespaces login and access with my Mulberry MUA has been just fine. however, attemtping to access with Thunderboird v107 has been completely unsuccessful. T-Bird's "Server Settings" for my user are config'd as: Server Type: IMAP MailServer Server name: mail.testdomain.com Port: 993 Default: 993 User name: testuser(a)testdomain.com [X] User secure connection (SSL) [ ] User secure authentication on access, T-Bird's status bar shows "Openeing folder ...", but never continues on any further. i never see my mailboxes, Namespaces, etc, as I do in Mulberry. my dovecot log shows: dovecot: 2005.10.02 14:29:26 Info: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=172.30.11.5 rip=172.30.11.6 dovecot: 2005.10.02 14:29:26 Info: auth(default): client out: CONT 1 dovecot: 2005.10.02 14:29:26 Info: auth(default): client in: CONT 1 AGJsYWtlcnNAb3BlbmV4ZWMuY29tAGJsYWtlcnM= dovecot: 2005.10.02 14:29:26 Info: auth(default): client out: OK 1 user=testuser(a)testdomain.com dovecot: 2005.10.02 14:29:26 Info: auth(default): master in: REQUEST 111 28213 1 dovecot: 2005.10.02 14:29:26 Info: auth(default): master out: USER 111 testuser(a)testdomain.com uid=42 gid=42 dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): Effective uid=42, gid=42 dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): Namespace: type=private, prefix=Private/, sep=/, inbox=yes, hidden=no, subscriptions=no dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): maildir: data=/var/Mail/MailHome/Domains/testdomain.com/Accounts/t/testuser/Maildir:… dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): maildir: root=/var/Mail/MailHome/Domains/testdomain.com/Accounts/t/testuser/Maildir, index=/var/Mail/MailHome/indexes/testdomain.com/testuser, control=, inbox= dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): Namespace: type=public, prefix=Public/, sep=/, inbox=no, hidden=no, subscriptions=no dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): maildir: data=/var/Mail/MailHome/Domains/testdomain.com/Public/Maildir:INDEX=/var/Ma… dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): maildir: root=/var/Mail/MailHome/Domains/testdomain.com/Public/Maildir, index=/var/Mail/MailHome/indexes/testdomain.com/public, control=, inbox= dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): Namespace: type=shared, prefix=Shared/, sep=/, inbox=no, hidden=no, subscriptions=no dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): maildir: data=/var/Mail/MailHome/Domains/testdomain.com/Shared/Maildir:INDEX=/var/Ma… dovecot: 2005.10.02 14:29:26 Info: imap(testuser(a)testdomain.com): maildir: root=/var/Mail/MailHome/Domains/testdomain.com/Shared/Maildir, index=/var/Mail/MailHome/indexes/testdomain.com/shared, control=, inbox= dovecot: 2005.10.02 14:29:26 Info: imap-login: Login: u:<testuser(a)testdomain.com>, rIP:[10.0.0.6], lIP:[10.0.0.5], IMAP, plain, TLS which looks ok to me (?). fwiw, TBird can access TLS+Plain accounts on CGatePro & CyrusIMAP accounts i've tried w/ no problem ... any suggestions/thoughts? cheers, richard -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (Darwin) iEYEARECAAYFAkNAUvsACgkQGnqMy4gvZ6GT7QCghiGiPyybvS8H8aFbVzwdAtT2 s/0An3pi2t8xa1aWrd3WDrnxdC8CaHo0 =a69w -----END PGP SIGNATURE-----

1 0

[Dovecot] A little request
by Riccardo Bini 01 Oct '05

01 Oct '05

Hi all, I have a little request: It's possible to have the full user name in the logs? I mean this: dovecot: pop3(info): Logout. top=0/0, retr=0/ del=0/0, size=0 info(a)example.com instead of info. I use 10 real users and many vpopmail users. I get in the log too many (info)... 8-( Thx Rick

2 2

[Dovecot] sudo /etc/init.d/dovecot start doesn't work
by Sam Fung 01 Oct '05

01 Oct '05

I've been trying to get dovecot working with postfix with virtual domain setting. I noticed that if I started dovecot with "sudo /usr/sbin/dovecot", everything would work fine. But if I started with "sudo /etc/init.d/dovecot start", I would get the following permission error. I checked "ps -ef | grep dovecot" and didn't find anything different. Sep 29 16:54:35 localhost imap-login: Login: xyz(a)example.com [::ffff: 192.168.0.4 <http://192.168.0.4>] Sep 29 16:54:36 localhost imap(xyz(a)example.com): mkdir_parents(/var/spool /virtual_mailboxes/example.com/xyz/.imap/INBOX) failed: Permission denied Here's the directory for storing virtual domain email. [localhost ~]$ sudo ls -al /var/spool/virtual_mailboxes/example.com total 24 drwx------ 3 vuser vuser 4096 Sep 29 16:43 . drwxrwxr-x 3 root mail 4096 Sep 21 21:57 .. drwx------ 3 vuser vuser 4096 Sep 29 16:55 xyz [localhost ~]$ sudo ls -al /var/spool/virtual_mailboxes/example.com/xyz total 32 drwx------ 3 vuser vuser 4096 Sep 29 16:55 . drwx------ 3 vuser vuser 4096 Sep 29 16:43 .. -rw------- 1 vuser vuser 1209 Sep 29 19:10 Inbox

3 4

[Dovecot] Using procmail with virtual users...
by Arnaud Guiton 01 Oct '05

01 Oct '05

Hello all, I've a working dovecot installation on my machine, using exim3, virtual users and maildirs. I would like to add procmailrc rules for these (virtual) users, but i've not succeeded with that. The authentication is done with a passwd-file looking like this : testuser:password:uid:gid::/home/mail/testuser::chroot:maildir:/home/mail/testuser/Maildir/ i've put .procmailrc files in /home/mail/testuser/.procmailrc, but it this not taken into account, because the MTA never calls the procmail router as it resides after the dovecot one. How is the proper way of using procmail with virtual user (and is it at least possible) ? Thanks, -- Arnaud

2 1

[Dovecot] Red Hat ES 4 - dovecot-auth: Unknown password scheme SMD5
by mel llaguno 01 Oct '05

01 Oct '05

I have a couple of questions regarding the default dovecot packaged with RedHat ES 4. The dovecot version is 0.99.11-2.EL4.1 which I assume is considerably behind the current stable version of 0.99.14. Is it the fact that I am using an older version of dovecot that SSHA passwords in an openldap directory are not recognized and give the following error: dovecot-auth: Unknown password scheme SMD5 ? LDAP is working as expected for NFS maildirs. I have dovecot 0.99.13 working on fedora core 3, but the stability of fedora leaves much to be desired and would like to get a stable, low maintenance install of dovecot on an enterprise supported linux. Redhat does not have packages for 0.99.14 and I would rather compile from source if possible. I've specified --with-ldap as part of the configure script, but am wondering if there is anything more to add to support SSHA passwords. Until dovecot 1.0 is proven in the field, it is not a consideration for the production environment this server is being used for. Any help with this matter would be greatly appreciated. TIA, Mel Llaguno

1 0

[Dovecot] Can't connect to auth server at default: Connection refused
by Chris Wakelin 30 Sep '05

30 Sep '05

We've being running with Dovecot 1.0-stable since Tuesday, and on the whole it's gone very well (meaning nobody's noticed!). My best estimate is we're using half the disk accesses and 2/3 the CPU of UW-IMAP/Qpopper. We've quite a mixture of error messages in the logs, the most worrying of which is that several times we've had a few seconds of "xxx-login: Can't connect to auth server at default: Connection refused" (where xxx is pop or imap). It seems to sort itself out shortly afterwards. We're using userdb=passwd, passdb=passwd (authenticating via NIS). From Tuesday we'll be using passdb=pam (pam_ldap to Active Directory). My first guess is that some dovecot-auth process stops responding and gets killed off. Is this right? Other errors we're seeing include 1) pread_full() failed with mbox file /export/mail/c/37/sau04djp/INBOX: No such file or directory (when there is!) 2) mbox sync: UID inserted in the middle of mailbox (especially with .prayer folders - configuration folders for our Webmail) 3) file mbox-lock.c: line 505 (mbox_lock): assertion failed: (lock_type == F_RDLCK || ibox->mbox_lock_type != F_RDLCK) presumably some of these are fixed in alpha2. Best Wishes, Chris -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

2 4

[Dovecot] Problem running latest 1.0-alpha3
by dovecot＠spam.turbolink.net 30 Sep '05

30 Sep '05

I've tried upgrading from dovecot-1.0 stable to the latest dovecot-1.0.alpha3. I've done a configure with: ./configure --with-notify=none --with-ioloop=poll And all I get is this when I run: dovecot: Sep 29 16:45:28 Info: Dovecot v1.0.alpha3 starting up dovecot: Sep 29 16:45:29 Error: Auth process died too early - shutting down dovecot: Sep 29 16:45:29 Error: auth(default): Fatal: sigaction(SIGRTMIN) failed: Invalid argument dovecot: Sep 29 16:45:29 Error: child 4828 (auth) returned error 89 Linux kernel 2.4.24, FS in use are XFS and NFS Any clues? - Mike

1 1

[Dovecot] redirect and sieve BUG
by List Subscriptions [Obfusc8.Org] 30 Sep '05

30 Sep '05

I've only just subscribed to the list, but in reading through the back-issues have come across a bug with dovecot-lda that was reported previously, and I can reproduce. Using dovecot-lda CVS with Revision 1.21 of deliver.c (as newer versions won't compile against 1.0-alpha3), with dovecot 1.0-alpha3 and postfix 2.1.5 Rredirects mangle some headers - the 'To:' header ends up as: To: undisclosed-recipients: ; And there is no subject header. Running sendmail from the cmdline with: sendmail -i -f '<>' -- destination at address.com <msgtext> as suggested to test by *Timo Sirainen *results in a correctly formatted message. The mail_send_forward function in mail-send.c looks sane from what I can see, but then I'm not a C coder... Any clues guys? Cheers, Pete

1 0

[Dovecot] Maildir and counting inodes
by Andy Cravens 30 Sep '05

30 Sep '05

I've been testing with alpha 3 and I am about ready to go production. I am switching from mbox to maildir and I'd like to know if there is a formula or rule of thumb for determining if your file system will have enough inodes to handle all the mail message files. I could write a script to look at each user's mbox files, count the number messages and calculate the average number of emails per user, then add a fudge factor for expected growth. However, I doubt anybody actually goes to this much trouble to plan ahead. Or do they? I'm running Solaris 9 and when I created the file system I just used the defaults. If I need to change anything, I'd rather do it before going production. Thanks for any info you can provide on this subject.

3 2

[Dovecot] error and time out
by Roberto Cipollini 29 Sep '05

29 Sep '05

I can't download my email if the email has one attachment. It goes in time out. This is the log: (how to verbose more information in dovecot.log?) version: fedora core 4 and dovecot 0.99-14-4 Can anyone tell me if this can be the problem to not able to retrieve the email from dovecot? ==> /etc/dovecot.log <== dovecot-auth: Sep 28 17:37:03 Info: Login process 8 disconnected dovecot-auth: Sep 28 17:37:03 Info: Login process 8 connected dovecot-auth: Sep 28 17:37:03 Info: Login process 8 sent handshake: PID 22677 dovecot: Sep 28 17:37:29 Warning: Killed with signal 15 dovecot-auth: Sep 28 17:37:29 Info: Login process 8 disconnected dovecot-auth: Sep 28 17:37:29 Info: Login process 12 disconnected

2 1

[Dovecot] Permission denied: failed to chdir to /home/paul
by Paul Ororke 28 Sep '05

28 Sep '05

Hi, I've been trying to set up Exin and Dovecot and think I've almost gotten there. However I'm not recieving mail to my inbox and I get messages like the following in /var/log/exim/main.log: 2005-09-28 04:14:47 1EKZtf-0003gQ-26 <= users-return-105525-paul= paulororke.net(a)openoffice.org H=s002.sfo.collab.net<http://s002.sfo.collab.net>( openoffice.org <http://openoffice.org>) [64.125.133.202<http://64.125.133.202>] P=smtp S=3120 id=200509280613.08050.dlewis(a)delewis.com 2005-09-28 04:14:47 1EKZtf-0003gQ-26 == paul(a)paulororke.net R=localuser T=local_delivery defer (13): Permission denied: failed to chdir to /home/paul How do I make it so that this doesn't happen?

3 3

[Dovecot] ManageSIEVE services with Dovecot cvs-LDA?
by OpenMacNews 28 Sep '05

28 Sep '05

hi all, has anyone had any success in getting the current dovecot cvs-lda's implementation of CyrusSIEVE responding to a ManageSIEVE client? in particular, i'm hoping that one can use, e.g., Mulberry's Client- & Server-side sieve editor: <http://www.cyrusoft.com/sieve/sievescreens.html> if i telnet to my dovecot box's sieve port ( = 2000) i get no response at all ... telnet localhost 2000 Trying 127.0.0.1... telnet: connect to address 127.0.0.1: Connection refused telnet: Unable to connect to remote host net-stat shows nothing on port 2000, and, afaik, there's no mention of a server on the wiki ... so i'm either doing something wrong, or "it" is simply not there. has a sieve server been implemented? any plans? thx! richard

4 7

[Dovecot] Problem with logging in on pop3
by michal 28 Sep '05

28 Sep '05

I switched from dovecot 0.99 to 1.0 stable alpha and now i cannot get my pop3 to work. I checked the logs and this what i`m getting when i try to login using outlook: Login: user=<michael>, method=PLAIN, rip=192.168.1.200, lip=192.168.1.20 Sep 27 17:21:26 mail dovecot: pop3(michael): Effective uid=515, gid=100 Sep 27 17:21:26 mail dovecot: pop3(michael): maildir: access(/home/michael/Maildir, rwx): failed: No such file or directory Sep 27 17:21:26 mail dovecot: pop3(michael): maildir: couldn't find root dir Sep 27 17:21:26 mail dovecot: pop3(michael): mbox: root exists (/home/michael/mail) Sep 27 17:21:26 mail dovecot: pop3(michael): mbox: INBOX exists (/var/mail/michael) Sep 27 17:21:26 mail dovecot: pop3(michael): mbox: root=/home/michael/mail, index=/home/michael/mail, inbox=/var/mail/michael Sep 27 17:21:26 mail dovecot: pop3(michael): open(/var/mail/.temp.mail.bio-world.com.18859.4e2d002619befc19) failed: Permission denied Sep 27 17:21:26 mail dovecot: pop3(michael): file_lock_dotlock() failed with mbox file /var/mail/michael: Permission denied Sep 27 17:21:26 mail dovecot: pop3(michael): Mailbox init failed top=0/0, retr=0/ del=0/0, size=0 Anybody have any idea how to fix that pls ?

1 0

[Dovecot] Dovecot Error: Master requested auth for nonexisting client
by Paul E Virgo 27 Sep '05

27 Sep '05

Hello, The subject line says it all. It seems to be happening with regards to my default auth setting in the dovecot.conf file. I currently have it set to 'plain'. Am I missing something? FWIW, I am using the latest, stable (alpha) release: 1.0.alpha3 PE Virgo

3 2

Re: [Dovecot] Misbehavior with Dovecot and Mulberry
by Jon Roma 27 Sep '05

27 Sep '05

Sorry about that last -- Windows seems to have mangled the attachment. Retrying here.

2 1

[Dovecot] stable 1.0 on FC3
by Obantec Support 27 Sep '05

27 Sep '05

Hi should this worry me dovecot: POP3(chelan): file mail-index-view-sync.c: line 60 (view_sync_get_expunges): assertion failed: (ret == 0) using mbox format under /var/spool/mail/ Mark -- Obantec Support www.obantec.net 0845 458 3121 WebHosting and Domains Nominet UK Member & IPStag Holder CentralNic Accredited Reseller

2 1

[Dovecot] mail not found
by Michael Collins 27 Sep '05

27 Sep '05

This is in my dovecot.conf default_mail_env = maildir:/var/mail/vhosts/%1u/%u/ my mail ia in/var/mail/vhosts/anawebdesigns.com/user1/cur, new, tmp As you can guess these are virtual accounts. Auth works but mail is not found. How do I need to modify the line in dovecot.conf? Thanks. -- -- Michael H. Collins It's us against them. Ride like you stole it. If you love some code, set it free. Please avoid sending me Word or PowerPoint attachments. See http://www.gnu.org/philosophy/no-word-attachments.html

2 1

Re: Re: Re: [Dovecot] virtual domain
by Barry Kwok 27 Sep '05

27 Sep '05

>On Tue, 2005-09-27 at 13:29 +0800, Barry Kwok wrote: >> userdb static { >> args = uid=503 gid=503 mail=mbox:/var/spool/virtual/%d/%n >> } > >Drop the "mail" part from here. You already have it in default_mail_env, >and it's correct there. Here you're saying that the .../%d/%n is the >mail directory, not file. If it refuses to start up without the mail= >part, replace it with home=/tmp instead. > >> Why I need a IMAP folder in a POP3 only server > >Dovecot is mostly an IMAP server, POP3 was just an afterthought. > >> and can I change that folder to /tmp directory. > >Yes, as long as nothing actually gets written there (and with >INDEX=MEMORY and POP3 nothing should get written there). > > Thank you Timo, I have just tried. But I found that I must add the mail=mbox:/var/spool/virtual/%d/%n part. Without this part, the dovecot seems not checking the right location of mail spool and simply say that "no new email". Now I added this part together with "home=/tmp" part into userdb config and It works now with IMAP folder in /tmp directory. But I want to ask if there is any file locking problem as I am running virtual email with vmail as owner for all mbox accounts. And it seems that they are all share the same IMAP folder located in /tmp directory.

2 1

[Dovecot] Hostname passed to PAM as rhost
by Tom Alsberg 27 Sep '05

27 Sep '05

(I am sorry to bother the list with something I should have verified myself right now - I simply do not have access to the source code here) Thinking of some limit I wanted to put with authentication, I am wondering - when Dovecot authenticates a user using PAM, now that (in 1.0) it passes the rhost item to PAM, it passes a hostname, not an IP address. Does it double-verify the DNS record before it trusts this to be the hostname (first checking the IP address in in_addr.arpa and then checking that the hostname indeed maps back to the same IP address)? That is necessary in order to trust the client address when determining authentication strength in the PAM module based on the client location (specifically we want stronger authentication when the client comes outside of our network, while inside a plain password suffices), as else anybody could "spoof" the hostname by changing the IN PTR record of his IP address to point back to some "trusted" hostname (given he has control of the DNS zone his host is in, which is completely possible given the server knows nothing about it). Thanks, -- Tom -- Tom Alsberg - hacker (being the best description fitting this space) Web page: http://www.cs.huji.ac.il/~alsbergt/ DISCLAIMER: The above message does not even necessarily represent what my fingers have typed on the keyboard, save anything further.

5 6

[Dovecot] POP3 problem
by michal 27 Sep '05

27 Sep '05

Hey all this is my first post to this list. I have fresh Red Hat AS 4.0 with postfix 2.1. This will be my mail server. I have one problem with pop3. My mail server is working properly. I did the following test: Sent an email to some other server(yahoo.com)->email got there fine. >From that other server(yahoo.com) replaied-> to the new server and email got there fine,checked using pine. Now in x windows on the mail server if i lunch email client software and set up the account, then i can send and receive emails fine so pop3 is working. But when i go to different machine like PC set up outlook then i cannot receive emails. I get error in outlook that the connection has failed. So i telnet 192.168.1.10 110 and I have gotten response from the server 250 dovecot OK. I really dont what to do at this time. I have been trying couple different things without any luck..... need some help? Mike

3 5

[Dovecot] How safe is mbox_very_dirty_syncs?
by Chris Wakelin 27 Sep '05

27 Sep '05

I've tried turning on mbox_very_dirty_syncs for myself (and a few other brave souls running 1.0-alpha3 rather than 1.0-stable) again to see what perfomance gain it gives (see thread http://www.dovecot.org/list/dovecot/2005-July/007956.html) Now we aren't running UW-IMAP at all, how safe is mbox_very_dirty_syncs assuming the only other process writing to mailboxes is our MTA (exim) which simply appends messages to the end? Is it safer still using Dovecot 1.0-alphas and the LDA? Does it matter if there are concurrent connections to the mailbox? Best Wishes, Chris -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

3 2

[Dovecot] new mailbox format v2
by Timo Sirainen 27 Sep '05

27 Sep '05

Updated version. The previous one was a bit too complicated with flag updates for pretty minimal benefits. Changes: - writing/reading mail flags can be disabled to get better performance without it requiring any changes to how the files are normally handled (so mixed more works fine). - writing flags now requires getting shared locks. so there's the overhead of locking but flag writers don't have to wait for each others. - reading requires no locking anymore. the comment in the previous version about reading only half a mail being a problem doesn't actually matter, since if a client tries to read an expunged mail Dovecot already disconnects the client immediately (since most clients can't handle such situation well anyway). - no more problems with mailbox readers locking out expungers - note about fcntl() locking being able to provide even higher concurrency - works just fine with plain dotlocks, so works fine with NFS And looks like I forgot to explain the "mail header padding" before. I'm not exactly sure if it's useful or not, but it doesn't hurt to have it there if it's wanted. The idea was anyway that if you're writing more than one flag at a time, having a 512 byte padding would make sure that when writing the few bytes the OS will only have to read one sector from disk (512 bytes in all todays OSes I believe?) to get the non-written parts of the sector instead of possibly reading two sectors. So it might help with trading disk reads for some wasted disk space. Generic ------- The point is to have a mailbox format where the mailbox can consist of one or more files. Grouping multiple files in a single file makes it faster to read, but it's slower to expunge mails from the beginning of the file. So this format would allow sysadmin to specify rules on how large the files would be allowed to grow. Index File ---------- Named "index". Index file gives a mapping between UIDs <-> filenames: Header: <uidvalidity> <last-used-uid> Record: <uid-first> <uid-last> <filename> Record: .. eg.: 1127468129 5 1 3 msg.1 4 4 msg.4 All of the UIDs don't have to actually exist in the file if they have been expunged. The record should be removed once all of the UIDs have been removed from it (and the file itself been deleted). The same file may appear multiple times in the index. For example: 1 2 msg.1 3 3 msg.3 4 5 msg.1 This means that UIDs 1, 2, 4 and 5 are in file msg.1, but UID 3 is in file msg.3. The filename doesn't matter as long as it's unique, but probably wouldn't hurt to include its first UID in the filename so humans can find mails more easily. The filename however must not end with ".lock". The file is modified by creating first exclusively owned "index.lock" file, updating it and then rename()ing it over the index file. This lock file shouldn't be held for a long time, so if it exists, and it doesn't get modified at all within 30 seconds, it can be overwritten. Before rename()ing over the index file, you should check with stat() that the index.lock file is still the same as you expect it to be (in case your process was temporarily stopped for over 30 secs). The index file's mtime timestamp must grow after each modification. This makes it easy to check if new mail has been added to the mailbox. Mail File --------- File header: Bytes Format Description 8 hex Header size 16 hex Append offset 4 hex Mail header size 4 hex Mail header padding 4 hex Keyword count in mail headers Mail header: Bytes Format Description 8 hex UID 16 hex Mail size 1 1/0 Answered flag 1 1/0 Flagged flag 1 1/0 Deleted flag 1 1/0 Seen flag 1 1/0 Draft flag 1 1/0 Expunged flag n 1/0 Keywords The file layout then goes: <File header> - possible padding due to Header size <Mail header #1> - possible padding due to Mail header size <Mail data #1> - possible padding due to Mail header padding (ie. next Mail header's offset is divisible with Mail header padding) <Mail header #2> etc.. The UIDs must be ascending within the file (but as said above, some UIDs between them may exist in other files). If mail has been marked with expunged-flag, it should be treated as if it was already expunged. The mail will really be expunged later in some nightly run. Reading the files requires no locking. If while reading you happen to hit unexpected end of file, it means that mails were expunged from the file. After that you'll look at the index file again to see which file the mail went and continue from there on. If the mail isn't found, it means it got expunged. Expunging happens by locking the file and then copying all non-expunged mails after the first expunged one to new file. Then update the index file with the new location for the UIDs, and at last ftruncate() at the position of first expunged mail in the original file. Flag updates require locking the file as well, otherwise we might try to write past the end of file when another process is expunging the mails. Shared locking can be used for flag update locking since each flag update can be atomically changed by writing one byte. Appending mails can be done by either locking existing file and appending to it, or creating a new file. If appending to a new file, create it with .lock suffix and then check that the file without .lock wasn't already just created to prevent race conditions. When appending to existing file, check "Append offset" from file's header. If that offset is at the end of file, just append there. Otherwise read the mail's header from there. If it has a non-zero UID and index file says that the same UID exists in this file, jump over the mail and do the same checks for all the rest of the mails in the file. Once the check doesn't match or you reach EOF, update the append offset in the header to that offset and write your mail there. Initially write the UID in mail's header as zeroes ('0', not NUL). Once the append is completely finished, you'll have to update it with the new UID. You'll do this by locking index file, reading the latest last-used-uid and using the next value for your UID. Once you've written it, rewrite the index file with updated last-used-uid field and your UID added to it. After this, update the append offset in the mail file and unlock it. If fcntl() locking is used, locking only specific ranges can give more concurrency. Flag updates only need to lock the part of the file they're modifying. Expunges need to lock the part which it's removing. Appending needs to lock from <end of file-1> to end of file (ie. l_len=0). Keywords file ------------- Named "index.keywords". This contains mappings between keyword numbers and names. TODO: write how it's updated Recent file ----------- "index.recent.<uid>" file tells what the last non-recent UID was. The file doesn't have any data inside it. When opening the mailbox you should find and rename() the existing index.recent.<uid> file to the new index.recent.<last-uid>. A successful rename() means the mails between <uid>+1 .. <last-uid> are recent for you. A failed rename() means that someone else managed to do it. You should look for the file again and if it was renamed to less than <last-uid>, you should try again. Nightly cleanups ---------------- Because expunged mails may be left lying around for a while, there probably should be some nightly check that cleans them up. Other cleanups that may be necessary after crashes are: - .lock files - expunged data at the end of files (can be checked with same rules as how appending determines the offset where to append) Alternative ways to use ----------------------- Expunging mails isn't very filesystem quota friendly since it requires creating another file to copy the expunged mails to. This could also be done by just moving the data within the file. This however requires that all file reads must also be shared-locked. Also it has the problem of leaving the mailbox corrupted if the copying gets aborted in the middle. For the best performance the mail flags could be stored only in Dovecot's index files. In that case the flag update locking isn't slowing down expunges (and if fcntl() locks can't be used, doesn't slow down appends either). Also there's no need for keywords/recent files. Compatibility ------------- If needed, it would be possible to create new/ and tmp/ directories under the mailbox to allow mail deliveries to be in maildir format. The maildir files would be then either just moved or maybe be appended to existing mail files.

1 0

[Dovecot] Mail directory funkiness
by Ted Kaczmarek 27 Sep '05

27 Sep '05

I am using dovecot-0.99.14-4.fc4 on FC4, was testing using mbox and than switched to using Maildir. default_mail_env = maildir:~/Maildir >From evolution when I create a folder the folder is created in ~/mail instead of ~/Maildir I am still rather new to dovecot, but this does not make sense. I made sure to restart dovecot, even added a .procmailrc. cat .procmailrc MAILDIR=/home/tedkaz/Maildir :0 ./ I am going to grab the latest version and test with that, but if if anyone has insight into how I got here it would be appreciated :-) Likely a pilot error. Regards, Ted

2 3

Re: Re: [Dovecot] virtual domain
by Barry Kwok 27 Sep '05

27 Sep '05

>On Mon, 2005-09-26 at 21:33 +0800, Barry Kwok wrote: >> we are currently using vm-pop3d to implement virtual domains. But due to some locking problem in vm-pop3d, we want to test the possibility to change to dovecot. >> Currently, in vm-pop3d, the passwd file is located in >> /etc/virtual/domain1.com/passwd >> /etc/virtual/domain2.com/passwd > >passdb passwd-file { > args = /etc/virtual/%d/passwd >} > >This requires Dovecot 1.0.alpha2 or later. > >> and the passwd format is: >> user: md5 encrpted password > >In MD5crypt format? ie. $1$something? Then it should work directly. > >> and the email is store in >> /var/spool/virtual/domain1.com/user >> /var/spool/virtual/domain2.com/user > >As mboxes? For IMAP you'll need also some directory where non-INBOXes >are stored, and with POP3 Dovecot also wants a directory where it can >store index files. > >If you don't want either, you could do something like: > >default_mail_env = mbox:/tmp:INBOX=/var/spool/virtual/%d/%u:INDEX=MEMORY Thank you. Timo. I have installed Dovecot 1.0 alpha3 and tested. It is a mbox POP3 only server. The relevent part of dovecot.conf I have changed: default_mail_env = mbox:/tmp:INBOX:/var/spool/virutal/%d/%u:INDEX=MEMORY passdb passwd-file { # Path for passwd-file args = /etc/virtual/%d/passwd } userdb static { args = uid=503 gid=503 mail=mbox:/var/spool/virtual/%d/%n } I can login with user(a)domain1.com but there is error in logfile: Sep 27 13:15:16 ns2 dovecot: pop3(user(a)domain1.com): mbox: Can't create root IMAP folder /mail: Permission denied Sep 27 13:15:16 ns2 dovecot: pop3(user(a)domain1.com): Failed to create storage with data: mbox:/var/spool/virtual/domain1.com/user Sep 27 13:15:16 ns2 dovecot: pop3-login: Login: user=<user(a)domain1.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Sep 27 13:15:16 ns2 dovecot: child 19147 (pop3) returned error 89 I then created a /mail directory with file mode 777, then it is OK. Why I need a IMAP folder in a POP3 only server and can I change that folder to /tmp directory.

2 1

[Dovecot] Misbehavior with Dovecot and Mulberry
by Jon Roma 27 Sep '05

27 Sep '05

I'm having a bit of misbehavior wherein Dovecot seems to refuse to cooperate with my Mulberry MUA. By and large, everything works great. I can move mail back and forth happily. I can compose a note and copy the outgoing mail to my Dovecot "Sent" folder using my default Mulberry settings. But if I reply or forward a mail, I get a Mulberry error popup saying that it "couldn't decode the response from the server" and that the operation was unsuccessful. This was somewhat mystifying (especially since this does work for a newly composed message as opposed to a reply/forward), so I turned on Mulberry logging. This is what I see (with unrelated operations clipped from the log). First, the first case where I create a new message, send it, and save a copy in my Sent folder: --> #6.3408 Mon Sep 5 23:24:27 2005 A00085 APPEND Sent (\Seen) {418+} * 5544 EXISTS * 1 RECENT A00085 OK Append completed. All's well there. Mulberry does a FETCH to grab the new message (reply) from my Sent folder and then does a SORT so that it can order it properly in the display. This too succeeds but is probably irrelevant to us. After a couple NOOP commands come and go in the background, I try to reply to a message in one of my mailboxes. In this case it happens to be the one in my Sent folder. So Mulberry issues a FETCH (you can see the original mail there in the FETCH response from Dovecot). It then does a STORE of the original mail, apparently to update the \Answered flag. It then tries to APPEND the reply to the Sent folder, but this time, the server comes back with a NO. See below --> #6.3408 Mon Sep 5 23:24:43 2005 A00089 FETCH 5544 (BODY[1]) * 5544 FETCH (BODY[1] {63} ) A00089 OK Fetch completed. --> #6.3408 Mon Sep 5 23:25:13 2005 A00090 FETCH 5544 (RFC822.HEADER) * 5544 FETCH (RFC822.HEADER {355} Date: Mon, 05 Sep 2005 23:24:27 -0500 From: Jon Roma <roma(a)uiuc.edu> To: Jon R Roma <roma(a)uiuc.edu> Subject: Test 1 Message-ID: <DDDD999F0F4E38F8C1510CC8(a)jrr2.isdn.uiuc.edu> X-Mailer: Mulberry/3.1.6 (Win32) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline ) A00090 OK Fetch completed. --> #6.3408 Mon Sep 5 23:25:13 2005 A00091 STORE 5544 +FLAGS (\Answered) * 5544 FETCH (FLAGS (\Answered \Seen \Recent)) A00091 OK Store completed. --> #6.3408 Mon Sep 5 23:25:13 2005 A00092 APPEND Sent (\Seen) {610+} A00092 NO I am having similar problem saving a draft to my Drafts folder and suspect the same thing is behind both of these. I didn't create a Mulberry trace log for this but can do so if need be. I am running 1.0-test80 with Timo's patch to fix the "time off by 200 minutes" error with mbox. All my folders are maildir at this point -- I've converted them out of my UW mbx format store. My client is Mulberry 3.1.6 for Windows and the OS is AIX 5.1. This weird behavior is a mystery to me!

3 13

[Dovecot] Problems with alpha3 + openssl-0.9.8
by Andy Cravens 27 Sep '05

27 Sep '05

Has anybody successfully compiled alpha 3 with the newly released openssl-0.9.8? I just wasted the weekend trying to get dovecot to compile using the new openssl libs. Openssl-0.9.7d works like dream. Just wanted to know if anybody had this combo working.

3 2

[Dovecot] 1.0alpha3 packages for debian
by Jaldhar H. Vyas 26 Sep '05

26 Sep '05

Sorry this took even longer than I thought but they should be arriving in unstable this afternoon. I also have a backport for stable available at http://www.braincells.com/backports This directory is not aptable so manually install the packages for now. (Hopefully backports.org will have their sarge repository open soon. When that happens they will move there.) The configuration file format has changed so you will want to carefully check /etc/dovecot/dovecot.conf when upgrading. I forgot to put a note about that in NEWS.debian sorry. I think I might have forgotten a couple of config file tweaks people have suggested and in general, if you sent me mail in the past month or so and I didn't respond or the problem still isn't fixed, please give me a nudge. This is why you really ought to use the Debian bug tracking system rather than mailing the maintainer. Anyway, enjoy. -- Jaldhar H. Vyas <jaldhar(a)debian.org> La Salle Debain - http://www.braincells.com/debian/

1 0

[Dovecot] Dovecot-Pop3d
by Mark Smith 26 Sep '05

26 Sep '05

What port does Dovecot-Pop3d run on? 110? If so I can't get it to work "netstat -ltnp | grep ':110'" shows nothing. and dovecot-pop3d is installed. Regards, _________________________________________________________________ The new MSN Search Toolbar now includes Desktop search! http://toolbar.msn.co.uk/

2 1

[Dovecot] virtual domain
by Barry Kwok 26 Sep '05

26 Sep '05

we are currently using vm-pop3d to implement virtual domains. But due to some locking problem in vm-pop3d, we want to test the possibility to change to dovecot. Currently, in vm-pop3d, the passwd file is located in /etc/virtual/domain1.com/passwd /etc/virtual/domain2.com/passwd and the passwd format is: user: md5 encrpted password and the email is store in /var/spool/virtual/domain1.com/user /var/spool/virtual/domain2.com/user and we login as user(a)domain1.com, user(a)domain2.com . We want to maintain this format as login id and the password format. What should be changed in dovecot.conf? Thanks.

3 2

[Dovecot] DSA support for TLS?
by OpenMacNews 25 Sep '05

25 Sep '05

hi all, i've dovecot TLS working correctly w/ locally generated *RSA* CA cert, domain privkey & self-signed domain cert. to that end, my dovecot.conf includes: ssl_key_file = /var/Security/mail.testdomain.com.privkey.rsa.pem ssl_cert_file = /var/Security/mail.testdomain.com.cert.rsa.pem ssl_ca_file = /var/Security/MyCertificateAuthority.CA.cert.rsa.pem ssl_verify_client_cert = no ssl_cipher_list = ALL:!SSLv2:!aNULL:!NULL:!EXPORT:!DES:!LOW:@STRENGTH however, if I try to setup for DSA use: ssl_key_file = /var/Security/mail.testdomain.com.privkey.dsa.pem ssl_cert_file = /var/Security/mail.testdomain.com.cert.dsa.pem ssl_ca_file = /var/Security/MyCertificateAuthority.CA.cert.dsa.pem ssl_verify_client_cert = no ssl_parameters_file = /var/Security/dsaparam.pem ssl_parameters_regenerate = 0 an attempt @ dovecot launch results in a logged error of: dovecot: Sep 11 11:58:43 Error: imap-login: Can't load private key file /var/Security/mail.testdomain.com.privkey.dsa.pem: error:0607907F:digital envelope routines:EVP_PKEY_get1_RSA:expecting an rsa key wherein it looks like dovecot is _still_ seeking an RSA key. fwiw, % cat /var/Security/mail.testdomain.com.privkey.dsa.pem -----BEGIN DSA PRIVATE KEY----- ... i've searched the dovecot wiki, and although the _only_ reference i find to dsa/diffie is @: http://wiki.dovecot.org/moin.cgi/MainConfig " ... SSL parameter file. Master process generates this file for login processes. It contains Diffie Hellman and RSA parameters. ssl_parameters_file = /var/run/dovecot/ssl-parameters.dat ... " it does seem to imply that DSA certs are, at least, supported. comments? cheers, richard

2 4

Re: [Dovecot] ManageSIEVE services with Dovecot cvs-LDA?
by OpenMacNews 25 Sep '05

25 Sep '05

i can't find a trace of any sieve mgmt services in dovecot as yet, and haven't found anything in this list ... so, if i *am* missing it, if someone would be kind enuf to point me in the right direction, i'd appreciate it! 8-} in the meantime, a little more info for those interested ... the latest spec for sieve management, "A Protocol for Remotely Managing Sieve Scripts", can be found at: <http://www.ietf.org/internet-drafts/draft-martin-managesieve-05.txt> iiuc, one of the authors, Tim Martin / Mirapoint Inc., is the "Tim" of "timsieved" -- Cyrus' ManageSIEVE 'server' bundled with cyrus-imap. i can strip timesieved it out of a successful build of cyrus-imap, but it seems to be dependent on cyrus-sasl ... as such, i'm not sure how to integrate it with dovecot's SASL auth methods. i have a feeling that such fuctionality would have to be re-implemented in dovecot alongside of sieve itself ... and probably should, if it were to be included. the courier-imap mailing lists also have folks searching for an alternative to timsieved ... richard

1 0

[Dovecot] redirect and sieve
by Rudy Gevaert 24 Sep '05

24 Sep '05

Hello, I have set up postfix to use dove-cot lda. This works perfect. Sieve works a bit... I would like to user the redirect feature of sieve. Having followed the wiki I added the following in my .dovecot.sieve : require "redirect"; if header :contains "subject" ["order", "buy"] { redirect "orders(a)company.dom"; } With this setup I get the following error: Sep 22 11:25:38 zalm deliver: sieve parse error for rgevaert: line 1: unsupported feature Remove the require line makes a forward. But this doesn't forward the message I set, but makes a new empty message... : - From Rudy.Gevaert(a)UGent.be Thu Sep 22 14:31:46 2005 - Date: Thu, 22 Sep 2005 14:29:01 +0200 (CEST) - From: Rudy.Gevaert(a)UGent.be (Rudy Gevaert) - To: undisclosed-recipients: ; Is this a bug? Or have i missed something? Thanks in advance, -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Rudy Gevaert e-mail: Rudy.Gevaert(a)UGent.be Directie ICT, Afdeling Infrastructuur Groep Systemen tel: +32 9 264 4734 Universiteit Gent fax: +32 9 264 4994 Krijgslaan 281, gebouw S9, 9000 Gent, Belgie www.UGent.be -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

2 4

[Dovecot] v1.0.alpha2, virtual domain authentication
by Jean-Marc Pigeon 24 Sep '05

24 Sep '05

Bonjour a tous, In Dovecot v1.0.alpha2, authentication according domain seems not working passdb = passwd-file /etc/vmail/test.%d %d is not resolved as "domain.name" I browsed on mailing list post and found the problem already reported... What I can't figure out is the answer about it... > Timo Sirainen tss at iki.fi > Fri Jul 22 15:44:02 EEST 2005 > > Trying this and it doesn't work: > > > > passdb = passwd-file /etc/vmail/test.%d > > > > Apparently it doesn't expand the %d according to the log file. > > This has been asked enough now so I just implemented it in CVS. Could be > still optimized a bit, but I think it's fast enough. Could somebody on the list be kind enough to give me some light about this? (is code to do this already implemented (CVS) but not tested yet????) Thanks for your help. A bientot -- ========================================================================== Jean-Marc Pigeon Internet: Jean-Marc.Pigeon(a)safe.ca SAFE Inc. Phone: (514) 493-4280 Fax: (514) 493-1946 REGULUS, a real time accounting/billing package for ISP REGULUS' Home base <"http://www.regulus.safe.ca"> ==========================================================================

2 4

[Dovecot] Dovecot LDAP authentication not working
by Kondwani Masiye 24 Sep '05

24 Sep '05

Hie all, I am new to both Dovecot and this list. I am trying to set up a Dovecot and Sendmail mail server with OpenLDAP user database for authentication. The sendmail setup is working fine, but authentication for Dovemail is not working. When I try to authenticate using POP3, I get an "authentication failed" error, and the logs show the following: Sep 19 16:53:21 tempo slapd[6316]: conn=74 op=2 SRCH base="dc=domain,dc=net" scope=2 deref=0 filter="(&(objectClass=posixAccount)(uid=kondie))" Sep 19 16:53:21 tempo slapd[6316]: conn=74 op=2 SRCH attr=uid userPassword Sep 19 16:53:21 tempo slapd[6316]: <= bdb_equality_candidates: (uid) index_param failed (18) Sep 19 16:53:21 tempo slapd[6316]: conn=74 op=2 SEARCH RESULT tag=101 err=0 nentries=1 text= Sep 19 16:53:21 tempo dovecot: auth(default): ldap(kondie,127.0.0.1): password mismatch Sep 19 16:53:25 tempo dovecot: pop3-login: Aborted login [127.0.0.1] Sep 19 16:53:25 tempo slapd[6313]: conn=72 fd=14 closed I know the password is correct because I am using the same LDAP database from a different server using UW Imap and it works. My dovecot-ldap.conf file below: hosts = localhost dn = cn=dovecot,dc=domain,dc=net ldap_version = 3 base = dc=domain,dc=net deref = never scope = subtree user_attrs = uid,homeDirectory user_filter = (&(objectClass=posixAccount)(uid=%u)) pass_attrs = uid,userPassword pass_filter = (&(objectClass=posixAccount)(uid=%u)) default_pass_scheme = CRYPT And the relevant parts (I think) from dovecot.conf file: I have googled all over and also the archives of this list for the last few months but I have not been able to work out what the problem is. As a matter of fact, I have tried to set it up the way it is described here: http://wiki.dovecot.org/moin.cgi/DovecotOpenLdap - but no luck. Could someone please assist in resolving this problem. Any pointers are welcome. Regards, Kondie Masiye -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.11.1/104 - Release Date: 16/09/2005 -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.11.1/104 - Release Date: 16/09/2005

2 1

[Dovecot] Fatal: EOF reading environment from master
by Marcathian Alexander 24 Sep '05

24 Sep '05

I have been running dovecot as an imap server since 22nd July 2005. The server was started from xinetd using /usr/local/libexec/dovecot/imap-auth The sever run successfully until the machine was shut down in a power outage on 12 Aug 2005. Dovecot has failed to start since the reboot. When starting it with the imap-auth it gives the following error: fatal: EOF reading environment from master I have uninstalled dovecot, downloaded, compiled, and installed the stable of 14Aug 2005 and got the same error. I then installed the 0.99.14 version ang got the same error. Can i have assistance in solving and/or diagnosing the problem? -- Marcathian Alexander SDE Assistant Sustainable Development and Environment Section Ministry of Physical Development, Environment & Housing Open Source Software Evaluation Project - WebMail/Groupware/Collaboaration [Open WebMail Project (http://openwebmail.org)

6 7

[Dovecot] LDA with postfix lock problem
by Rudy Gevaert 24 Sep '05

24 Sep '05

Hello, I'm trying to set up dovecot as the delivery agent for postfix. I configured postfix with: mailbox_command = = /usr/local/libexec/dovecot/deliver In the logs I see the following error: Sep 20 17:19:26 zalm deliver: open(/var/mail/.temp.zalm.8045.65c09c28953ea20c) failed: Permission denied Sep 20 17:19:26 zalm deliver: file_lock_dotlock() failed with mbox file /var/mail/rgevaert: Permission denied Sep 20 17:19:26 zalm postfix/local[8044]: 9790BBE4A: to=<rgevaert(a)zalm.ugent.be>, relay=local, delay=0, status=deferred (temporary failure) Info: zalm:~# ls -ld /var/mail drwxrwsr-x 2 root mail 4096 Sep 20 16:56 /var/mail Giving o write access to the folder fixed it, but not in a way it has to be :) I already added mail_extra_groups = mail to dovecot.conf But this doesn't help. What have I missed. Thanks in advance, -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Rudy Gevaert e-mail: Rudy.Gevaert(a)UGent.be Directie ICT, Afdeling Infrastructuur Groep Systemen tel: +32 9 264 4734 Universiteit Gent fax: +32 9 264 4994 Krijgslaan 281, gebouw S9, 9000 Gent, Belgie www.UGent.be -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --

2 1

[Dovecot] auth protocol, buffers
by Thomas Hummel 24 Sep '05

24 Sep '05

Hello Timo, I'm curious about 2 points (I'm using alpha2 but these are general questions) : Background : . I connect to dovecot-1.0.alpha2 through thunderbird . I use ldap pass/userdb and PLAIN mech . I've only got one auth block in dovecot.conf (all pass/userdb/mech except ldap/PLAIN are commented) 1) I notice that, for one thunderbird connection trial, imap-login issues 2 AUTH messages. Why ? What info does the "resp=" hold the second time ? It goes like this : Info: Dovecot v1.0.alpha2 starting up Info: auth(default): client in: AUTH 1 PLAIN service=IMAP lip=xxx.xxx.xxx.xxx rip=xxx.xxx.xxx.xxx Info: auth(default): client out: CONT 1 Info: auth(default): client in: CONT 1 AGRvdmV0ZXN0AGZvbw== Info: auth(default): ldap(dovetest,xxx.xxx.xxx.xxx): base=ou=personnes, dc=pasteur, dc=fr scope=subtree filter=(&(objectClass=posixAccount)(uid=dovetest)) fields=uid,userPassword Info: auth(default): ldap(dovetest,xxx.xxx.xxx.xxx): userPassword(password)={CRYPT}sa8ufSVwLUHVU uid(user)=dovetest Info: auth(default): client out: FAIL 1 user=dovetest Info: auth(default): client in: AUTH 2 PLAIN service=IMAP lip=xxx.xxx.xxx.xxx rip=xxx.xxx.xxx.xxx resp=AGRvdmV0ZXN0AGZvbw== Info: auth(default): ldap(dovetest,157.99.64.42): base=ou=personnes, dc=pasteur, dc=fr scope=subtree filter=(&(objectClass=posixAccount)(uid=dovetest)) fields=uid,userPassword Info: auth(default): ldap(dovetest,157.99.64.42): userPassword(password)={CRYPT}sa8ufSVwLUHVU uid(user)=dovetest dovecot: Sep 20 17:58:27 Info: auth(default): client out: FAIL 2 user=dovetest 2) Which buffer/string handling function (among those in your lib) should I use to safely allocate a string and/or copy a string into another ? (instead of using str[n|l]cpy for instance) ? Thank you. -- Thomas Hummel | Institut Pasteur <hummel(a)pasteur.fr> | Pôle informatique - systèmes et réseau

2 1

[Dovecot] 1.0 alpha3 released
by Timo Sirainen 24 Sep '05

24 Sep '05

I'm a bit too busy nowadays because of school so I haven't had time to look at everyone's bug reports and some other mails. They're still marked as unread in my mailbox, so hopefully I'll get to them soon. And I don't mind you resend them if I don't answer in a few weeks :) Changes: - Fixed maildir syncing errors about wrong UIDs - Maildir was re-read all the time, even if we knew nothing had changed there - SSL/TLS connections used to have extra ~0.2s latencies because kernel was waiting for more data before sending it (at least with Linux). Fixed it by corking/uncorking before/after sending. I don't think the socket latencies are this bad normally though, I should probably look more into it if we're setting some socket flags badly (or does it happen specifically because we were using corking for the socket before SSL and kernel increased the timeouts because it thinks we're going to be using corking?). - Marking index file corrupted caused its recreation to still use old transaction log file, which usually caused the index to get corrupted again - Added --build-options parameter to dovecot binary (by Andrey Panin) - Parse obs-phrase correctly in mail address parser (by Chris Wakelin)

5 6

[Dovecot] dovecot with ssl only works on foreground mode
by blaq b0x 24 Sep '05

24 Sep '05

Hi, I've set up dovecot to use imaps/pops with certificates that I signed with my own CA. When I try to start it using service dovecot start it fails. I've tried disabling imaps in the config file and it starts fine so it seems it's the certificate part of the config. If,however, I start it with '/usr/sbin/dovecot -F' or even '/usr/sbin/dovecot' it starts! I've looked over the dovecot startup script but, can't seem to see anything that would hinder startup. I didn't have this problem with self-signed certs??? Can anyone shed some light on this? Thanks, __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

[Dovecot] Multiple authentication databases
by Alexander Shikoff 24 Sep '05

24 Sep '05

Hello, I'm trying to setup multimple auth. databases with Dovecot 1.0 alpha2. I wrote in dovecot.conf next lines (as was described at http://wiki.dovecot.org/moin.cgi/MultipleAuth) auth_debug = yes auth_verbose = yes auth default { mechanisms = plain user = root passdb sql { args = /usr/local/dovecot/etc/dovecot-mysql.conf } passdb pam { args = pop3 } userdb sql { args = /usr/local/dovecot/etc/dovecot-mysql.conf } userdb passwd { } } If user is virtual and placed in SQL database all works perfectly. But system users can not login: Sep 23 12:27:58 orion dovecot: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=192.168.5.23 rip=192.168.3.2 resp=AGRtaXRyeQBtb240bHVjY2tpdDQ= Sep 23 12:27:58 orion dovecot: auth-worker(default): sql(user,192.168.3.2): query: SELECT `password` FROM `users` WHERE login = 'user' Sep 23 12:27:58 orion dovecot: auth-worker(default): sql(user,192.168.3.2): unknown user Sep 23 12:27:58 orion dovecot: auth(default): client out: OK 1 user=user Sep 23 12:27:58 orion dovecot: auth(default): master in: REQUEST 19 50448 1 Sep 23 12:27:58 orion dovecot: auth-worker(default): sql(user,192.168.3.2): SELECT "mbox:/var/mail/virtual//user:INBOX=/var/mail/virtual//user:INDEX=MEMORY" AS `mail`, 101 AS `uid`, 101 AS `gid` FROM users WHERE login = 'user' Sep 23 12:27:58 orion dovecot: auth-worker(default): sql(user,192.168.3.2): User not found Sep 23 12:27:58 orion dovecot: pop3-login: Internal login failure: user=<user>, method=PLAIN, rip=192.168.3.2, lip=192.168.5.23 Sep 23 12:27:58 orion dovecot: child 50447 (auth) killed with signal 11 Sep 23 12:27:58 orion dovecot: auth-worker(default): mysql: Connected to 127.0.0.1 (exim) How can I setup multiple auth. databases correctly? Please, help! Thanks in advance, Alexander -- Kind Regards, Alexander Shikoff minotaur(a)crete.org.ua Mob.: +380 67 946 31 49

2 2

[Dovecot] Secure file messages
by zeotavio 24 Sep '05

24 Sep '05

Hi Qualquer pessoa sabe o que isto significa? dovecot-auth: pam_succeed_if: requirement "uid < 100" not met by user "marinho" This message appears for several users. (in the file /var/log/secure) I am grateful for your attention. José Otávio.

2 1

[Dovecot] Maildir and folders not under INBOX
by Oliver Schulze L. 24 Sep '05

24 Sep '05

Hi, I'm planning to migrate from dovecot/mbox to dovecot/maildir both using imap. I have read that when using the Maildir storage format, all folders are stored under the INBOX. Is this true in dovecot too? I want to have a configuration like the current: - new mail is delivered in /var/mail/USER - user folders are in /home/USER/mail I want to ask if this is posible in dovecot? Maybe using a config like this: default_mail_env = maildir:/home/%u/Maildir:INBOX=/var/mail/%u/Maildir Thanks Oliver -- Oliver Schulze L. <oliver(a)samera.com.py>

2 2

[Dovecot] Moving messages takes a longgggggg..... time. (Timeouts?) dovecot.conf help?
by Rob Frohne 23 Sep '05

23 Sep '05

Hi, I'm trying to get dovecot set up better. I am using 1.0alpha3. It takes a long long time to move messages for some reason. It seems it may be a timeout thing, because neither the client or server is using any cpu time or disk i/o or network to speak of. (To move maybe 400 messages, it seems to take maybe half an hour, maybe longer.) With alpha 2 I was getting messages from Thunderbird saying that the server was unable to move messages, would I like to continue. I haven't seen any of these lately, but when I updated to alpha3 I also made some dovecot.conf changes. I'm running this on OS X with a 450 MHz cube with 1.2 Gig of ram and a 7200 RPM hard drive. I have a lot of rules that move messages to various mailboxes and I get a lot of mail, so this is important to me. I have a very large Maildir set of mailboxes (about 40 of them with up to 70,000 messages in each mailbox). I have finally got it so that it will load the mailbox headers pretty quickly in Thunderbird. It takes about 15 to 30 seconds to load a message, but that is acceptable to me. Here is my dovecot.conf. Can anyone give me some tips? ## Dovecot 1.0 configuration file # '#' character and everything after it is treated as comments. Extra spaces # and tabs are ignored. If you want to use either of these explicitly, put the # value inside quotes, eg.: key = "# char and trailing whitespace " # Default values are shown after each value, it's not required to uncomment # any of the lines. Exception to this are paths, they're just examples # with real defaults being based on configure options. The paths listed here # are for configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var # --with-ssldir=/etc/ssl # Base directory where to store runtime data. base_dir = /var/run/dovecot/ # Protocols we want to be serving: # imap imaps pop3 pop3s #protocols = imap imaps # IP or host address where to listen in for connections. It's not currently # possible to specify multiple addresses. "*" listens in all IPv4 interfaces. # "[::]" listens in all IPv6 interfaces, but may also listen in all IPv4 # interfaces depending on the operating system. If you want to specify ports # for each service, you will need to configure these settings inside the # protocol imap/pop3 { ... } section, so you can specify different ports # for IMAP/POP3. #listen = * # IP or host address where to listen in for SSL connections. Defaults # to above if not specified. #ssl_listen = # Disable SSL/TLS support. ssl_disable = yes # PEM encoded X.509 SSL/TLS certificate and private key. They're opened before # dropping root privileges, so keep the key file unreadable by anyone but # root. Included doc/mkcert.sh can be used to easily generate self-signed # certificate, just make sure to update the domains in dovecot-openssl.cnf #ssl_cert_file = /etc/ssl/certs/dovecot.pem #ssl_key_file = /etc/ssl/private/dovecot.pem # File containing trusted SSL certificate authorities. Usually not needed. #ssl_ca_file = # Request client to send a certificate. #ssl_verify_client_cert = no # SSL parameter file. Master process generates this file for login processes. # It contains Diffie Hellman and RSA parameters. #ssl_parameters_file = /var/run/dovecot/ssl-parameters.dat # How often to regenerate the SSL parameters file. Generation is quite CPU # intensive operation. The value is in hours, 0 disables regeneration # entirely. #ssl_parameters_regenerate = 24 # SSL ciphers to use #ssl_cipher_list = ALL:!LOW # Disable LOGIN command and all other plaintext authentications unless # SSL/TLS is used (LOGINDISABLED capability). Note that 127.*.*.* and # IPv6 ::1 addresses are considered secure, this setting has no effect if # you connect from those addresses. disable_plaintext_auth = no # Use this logfile instead of syslog(). /dev/stderr can be used if you want to # use stderr for logging (ONLY /dev/stderr - otherwise it is closed). #log_path = # For informational messages, use this logfile instead of the default #info_log_path = # Prefix for each line written to log file. % codes are in strftime(3) # format. #log_timestamp = "%b %d %H:%M:%S " ## ## Login processes ## # Directory where authentication process places authentication UNIX sockets # which login needs to be able to connect to. The sockets are created when # running as root, so you don't have to worry about permissions. Note that # everything in this directory is deleted when Dovecot is started. #login_dir = /var/run/dovecot/login # chroot login process to the login_dir. Only reason not to do this is if you # wish to run the whole Dovecot without roots. # http://wiki.dovecot.org/Rootless #login_chroot = yes # User to use for the login process. Create a completely new user for this, # and don't use it anywhere else. The user must also belong to a group where # only it has access, it's used to control access for authentication process. # Note that this user is NOT used to access mails. # http://wiki.dovecot.org/UserIds #login_user = dovecot # Set max. process size in megabytes. If you don't use # login_process_per_connection you might need to grow this. login_process_size = 4096 # Should each login be processed in it's own process (yes), or should one # login process be allowed to process multiple connections (no)? Yes is more # secure, espcially with SSL/TLS enabled. No is faster since there's no need # to create processes all the time. login_process_per_connection = no # Number of login processes to create. If login_process_per_user is # yes, this is the number of extra processes waiting for users to log in. #login_processes_count = 3 # Maximum number of extra login processes to create. The extra process count # usually stays at login_processes_count, but when multiple users start logging # in at the same time more extra processes are created. To prevent fork-bombing # we check only once in a second if new processes should be created - if all # of them are used at the time, we double their amount until limit set by this # setting is reached. This setting is used only if login_process_per_use is yes. #login_max_processes_count = 128 # Maximum number of connections allowed in login state. When this limit is # reached, the oldest connections are dropped. If login_process_per_user # is no, this is a per-process value, so the absolute maximum number of users # logging in actually login_processes_count * max_logging_users. #login_max_logging_users = 256 # Greeting message for clients. #login_greeting = Dovecot ready. # Space-separated list of elements we want to log. The elements which have # a non-empty variable value are joined together to form a comma-separated # string. #login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c # Login log format. %$ contains login_log_format_elements string, %s contains # the data we want to log. #login_log_format = %$: %s ## ## Mail processes ## # Maximum number of running mail processes. When this limit is reached, # new users aren't allowed to log in. #max_mail_processes = 1024 max_mail_processes = 4096 # Show more verbose process titles (in ps). Currently shows user name and # IP address. Useful for seeing who are actually using the IMAP processes # (eg. shared mailboxes or if same uid is used for multiple accounts). #verbose_proctitle = no verbose_proctitle = yes # Show protocol level SSL errors. #verbose_ssl = no verbose_ssl = yes # Valid UID range for users, defaults to 500 and above. This is mostly # to make sure that users can't log in as daemons or other system users. # Note that denying root logins is hardcoded to dovecot binary and can't # be done even if first_valid_uid is set to 0. #first_valid_uid = 500 #last_valid_uid = 0 # Valid GID range for users, defaults to non-root/wheel. Users having # non-valid GID as primary group ID aren't allowed to log in. If user # belongs to supplementary groups with non-valid GIDs, those groups are # not set. #first_valid_gid = 1 #last_valid_gid = 0 # Grant access to these extra groups for mail processes. Typical use would be # to give "mail" group write access to /var/mail to be able to create dotlocks. #mail_extra_groups = mail_extra_groups = mail # ':' separated list of directories under which chrooting is allowed for mail # processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too). # This setting doesn't affect login_chroot or auth_chroot variables. # WARNING: Never add directories here which local users can modify, that # may lead to root exploit. Usually this should be done only if you don't # allow shell access for users. See doc/configuration.txt for more information. #valid_chroot_dirs = # Default chroot directory for mail processes. This can be overridden for # specific users in user database by giving /./ in user's home directory # (eg. /home/./user chroots into /home). Note that usually there is no real # need to do chrooting, Dovecot doesn't allow users to access files outside # their mail directory anyway. #mail_chroot = # Enable mail process debugging. This can help you figure out why Dovecot # isn't finding your mails. #mail_debug = no mail_debug=yes # Default MAIL environment to use when it's not set. By leaving this empty # dovecot tries to do some automatic detection as described in # doc/mail-storages.txt. There's a few special variables you can use, eg.: # # %u - username # %n - user part in user@domain, same as %u if there's no domain # %d - domain part in user@domain, empty if there's no domain # %h - home directory # # See doc/variables.txt for full list. Some examples: # # default_mail_env = maildir:/var/mail/%1u/%u/Maildir # default_mail_env = mbox:~/mail/:INBOX=/var/mail/%u # default_mail_env = mbox:/var/mail/%d/%n/:INDEX=/var/indexes/%d/%n # #default_mail_env = mbox:~/Library/Mail/Mailboxes:INBOX=/var/mail/%u default_mail_env = maildir:%h/Maildir # If you need to set multiple mailbox locations or want to change default # namespace settings, you can do it by defining namespace sections: # # You can have private, shared and public namespaces. The only difference # between them is how Dovecot announces them to client via NAMESPACE # extension. Shared namespaces are meant for user-owned mailboxes which are # shared to other users, while public namespaces are for more globally # accessible mailboxes. # # REMEMBER: If you add any namespaces, the default namespace must be added # explicitly, ie. default_mail_env does nothing unless you have a namespace # without a location setting. Default namespace is simply done by having a # namespace with empty prefix. #namespace private { # Hierarchy separator to use. You should use the same separator for all # namespaces or some clients get confused. '/' is usually a good one. #separator = / # Prefix required to access this namespace. This needs to be different for # all namespaces. For example "Public/". #prefix = # Physical location of the mailbox. This is in same format as # default_mail_env, which is also the default for it. #location = # There can be only one INBOX, and this setting defines which namespace # has it. #inbox = yes # If namespace is hidden, it's not advertised to clients via NAMESPACE # extension or shown in LIST replies. This is mostly useful when converting # from another server with different namespaces which you want to depricate # but still keep working. For example you can create hidden namespaces with # prefixes "~/mail/", "~%u/mail/" and "mail/". #hidden = yes #} # Space-separated list of fields to initially save into cache file. Currently # these fields are allowed: # # flags, date.sent, date.received, size.virtual, size.physical # mime.parts, imap.body, imap.bodystructure # # Different IMAP clients work in different ways, so they benefit from # different cached fields. Some do not benefit from them at all. Caching more # than necessary generates useless disk I/O, so you don't want to do that # either. # # Dovecot attempts to automatically figure out what client wants and it keeps # only that. However the first few times a mailbox is opened, Dovecot hasn't # yet figured out what client needs, so it may not perform optimally. If you # know what fields the majority of your clients need, it may be useful to set # these fields by hand. If client doesn't actually use them, Dovecot will # eventually drop them. # # Usually you should just leave this field alone. The potential benefits are # typically unnoticeable. #mail_cache_fields = # Space-separated list of fields that Dovecot should never save to cache file. # Useful if you want to save disk space at the cost of more I/O when the fields # needed. #mail_never_cache_fields = # Like mailbox_check_interval, but used for IDLE command. #mailbox_idle_check_interval = 30 mailbox_idle_check_interval = 15 # Allow full filesystem access to clients. There's no access checks other than # what the operating system does for the active UID/GID. It works with both # maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/ # or ~user/. #mail_full_filesystem_access = no # Maximum allowed length for mail keyword name. It's only forced when trying # to create new keywords. #mail_max_keyword_length = 50 mail_max_keyword_length = 250 # Save mails with CR+LF instead of plain LF. This makes sending those mails # take less CPU, especially with sendfile() syscall with Linux and FreeBSD. # But it also creates a bit more disk I/O which may just make it slower. #mail_save_crlf = no # Use mmap() instead of read() to read mail files. read() seems to be a bit # faster with my Linux/x86 and it's better with NFS, so that's the default. # Note that OpenBSD 3.3 and older don't work right with mail_read_mmaped = yes. #mail_read_mmaped = no # Don't use mmap() at all. This is required if you store indexes in remote # filesystems (NFS or clustered filesystem). #mmap_disable = no # Don't write() to mmaped files. This is required for some operating systems # which use separate caches for them, such as OpenBSD. #mmap_no_write = no # Locking method for index files. Alternatives are fcntl, flock and dotlock. # Dotlocking uses some tricks which may create more disk I/O than other locking # methods. #lock_method = fcntl # By default LIST command returns all entries in maildir beginning with dot. # Enabling this option makes Dovecot return only entries which are directories. # This is done by stat()ing each entry, so it causes more disk I/O. # (For systems setting struct dirent->d_type, this check is free and it's # done always regardless of this setting) #maildir_stat_dirs = no # Copy mail to another folders using hard links. This is much faster than # actually copying the file. This is problematic only if something modifies # the mail in one folder but doesn't want it modified in the others. I don't # know any MUA which would modify mail files directly. IMAP protocol also # requires that the mails don't change, so it would be problematic in any case. # If you care about performance, enable it. #maildir_copy_with_hardlinks = no maildir_copy_with_hardlinks = yes # Which locking methods to use for locking mbox. There's four available: # dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe # solution. If you want to use /var/mail/ like directory, the users # will need write access to that directory. # fcntl : Use this if possible. Works with NFS too if lockd is used. # flock : May not exist in all systems. Doesn't work with NFS. # lockf : May not exist in all systems. Doesn't work with NFS. # # You can use multiple locking methods; if you do the order they're declared # in is important to avoid deadlocks if other MTAs/MUAs are using multiple # locking methods as well. Some operating systems don't allow using some of # them simultaneously. #mbox_read_locks = fcntl #mbox_write_locks = dotlock fcntl # Maximum time in seconds to wait for lock (all of them) before aborting. #mbox_lock_timeout = 300 # If dotlock exists but the mailbox isn't modified in any way, override the # lock file after this many seconds. #mbox_dotlock_change_timeout = 30 # When mbox changes unexpectedly we have to fully read it to find out what # changed. If the mbox is large this can take a long time. Since the change # is usually just a newly appended mail, it'd be faster to simply read the # new mails. If this setting is enabled, Dovecot does this but still safely # fallbacks to re-reading the whole mbox file whenever something in mbox isn't # how it's expected to be. The only real downside to this setting is that if # some other MUA changes message flags, Dovecot doesn't notice it immediately. # Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK # commands. #mbox_dirty_syncs = yes # Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE, # EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored. #mbox_very_dirty_syncs = no # Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK # commands and when closing the mailbox). This is especially useful for POP3 # where clients often delete all mails. The downside is that our changes # aren't immediately visible to other MUAs. #mbox_lazy_writes = yes # umask to use for mail files and directories #umask = 0077 # Drop all privileges before exec()ing the mail process. This is mostly # meant for debugging, otherwise you don't get core dumps. It could be a small # security risk if you use single UID for multiple users, as the users could # ptrace() each others processes then. #mail_drop_priv_before_exec = no # Set max. process size in megabytes. Most of the memory goes to mmap()ing # files, so it shouldn't harm much even if this limit is set pretty high. #mail_process_size = 256 mail_process_size = 4096 # Log prefix for mail processes. See doc/variables.txt for list of possible # variables you can use. #mail_log_prefix = "%Us(%u): " ## ## IMAP specific settings ## protocol imap { # Login executable location. #login_executable = /usr/libexec/dovecot/imap-login # IMAP executable location #mail_executable = /usr/libexec/dovecot/imap # This would write rawlogs into ~/dovecot.rawlog/ directory: #mail_executable = /usr/libexec/dovecot/rawlog /usr/libexec/dovecot/imap # Maximum IMAP command line length in bytes. Some clients generate very long # command lines with huge mailboxes, so you may need to raise this if you get # "Too long argument" or "IMAP command line too large" errors often. #imap_max_line_length = 65536 imap_max_line_length = 262144 # Support for dynamically loadable modules. #mail_use_modules = no #mail_modules = /usr/lib/dovecot/imap # Send IMAP capabilities in greeting message. This makes it unnecessary for # clients to request it with CAPABILITY command, so it saves one round-trip. # Many clients however don't understand it and ask the CAPABILITY anyway. #login_greeting_capability = no # Workarounds for various client bugs: # delay-newmail: # Send EXISTS/RECENT new mail notifications only when replying to NOOP # and CHECK commands. Some clients ignore them otherwise, for example # OSX Mail. Outlook Express breaks more badly though, without this it # may show user "Message no longer in server" errors. Note that OE6 still # breaks even with this workaround if synchronization is set to # "Headers Only". # outlook-idle: # Outlook and Outlook Express never abort IDLE command, so if no mail # arrives in half a hour, Dovecot closes the connection. This is still # fine, except Outlook doesn't connect back so you don't see if new mail # arrives. # netscape-eoh: # Netscape 4.x breaks if message headers don't end with the empty "end of # headers" line. Normally all messages have this, but setting this # workaround makes sure that Netscape never breaks by adding the line if # it doesn't exist. This is done only for FETCH BODY[HEADER.FIELDS..] # commands. Note that RFC says this shouldn't be done. # tb-extra-mailbox-sep: # With mbox storage a mailbox can contain either mails or submailboxes, # but not both. Thunderbird separates these two by forcing server to # accept '/' suffix in mailbox names in subscriptions list. #imap_client_workarounds = outlook-idle imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep } ## ## POP3 specific settings ## protocol pop3 { # Login executable location. #login_executable = /usr/libexec/dovecot/pop3-login # POP3 executable location #mail_executable = /usr/libexec/dovecot/pop3 # Don't try to set mails non-recent or seen with POP3 sessions. This is # mostly intended to reduce disk I/O. With maildir it doesn't move files # from new/ to cur/, with mbox it doesn't write Status-header. #pop3_no_flag_updates = no # Support LAST command which exists in old POP3 specs, but has been removed # from new ones. Some clients still wish to use this though. Enabling this # makes RSET command clear all \Seen flags from messages. #pop3_enable_last = no # POP3 UIDL format to use. You can use following variables: # # %v - Mailbox UIDVALIDITY # %u - Mail UID # %m - MD5 sum of the mailbox headers in hex (mbox only) # %f - filename (maildir only) # # If you want UIDL compatibility with other POP3 servers, use: # UW's ipop3d : %08Xv%08Xu # Courier version 0 : %f # Courier version 1 : %u # Courier version 2 : %v-%u # Cyrus (<= 2.1.3) : %u # Cyrus (>= 2.1.4) : %v.%u # # Note that Outlook 2003 seems to have problems with %v.%u format which is # Dovecot's default, so if you're building a new server it would be a good # idea to change this. %08Xu%08Xv should be pretty fail-safe. #pop3_uidl_format = %v.%u # POP3 logout format string: # %t - number of TOP commands # %T - number of bytes sent to client as a result of TOP command # %r - number of RETR commands # %R - number of bytes sent to client as a result of RETR command # %d - number of deleted messages # %m - number of messages (before deletion) # %s - mailbox size in bytes (before deletion) #pop3_logout_format = top=%t/%T, retr=%r/%R, del=%d/%m, size=%s # Support for dynamically loadable modules. #mail_use_modules = no #mail_modules = /usr/lib/dovecot/pop3 # Workarounds for various client bugs: # outlook-no-nuls: # Outlook and Outlook Express hang if mails contain NUL characters. # This setting replaces them with 0x80 character. # oe-ns-eoh: # Outlook Express and Netscape Mail breaks if end of headers-line is # missing. This option simply sends it if it's missing. #pop3_client_workarounds = } ## ## Authentication processes ## # Executable location #auth_executable = /usr/libexec/dovecot/dovecot-auth # Set max. process size in megabytes. #auth_process_size = 256 # Authentication cache size in kilobytes. #auth_cache_size = 0 # Time to live in seconds for cached data. After this many seconds a cached # record is forced out of cache. #auth_cache_ttl = 3600 # Space separated list of realms for SASL authentication mechanisms that need # them. You can leave it empty if you don't want to support multiple realms. # Many clients simply use the first one listed here, so keep the default realm # first. #auth_realms = # Default realm/domain to use if none was specified. This is used for both # SASL realms and appending @domain to username in plaintext logins. #auth_default_realm = # List of allowed characters in username. If the user-given username contains # a character not listed in here, the login automatically fails. This is just # an extra check to make sure user can't exploit any potential quote escaping # vulnerabilities with SQL/LDAP databases. If you want to allow all characters, # set this value to empty. #auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ # Username character translations before it's looked up from databases. The # value contains series of from -> to characters. For example "#@/@" means # that '#' and '/' characters are translated to '@'. #auth_username_translation = # Username to use for users logging in with ANONYMOUS SASL mechanism #auth_anonymous_username = anonymous # More verbose logging. Useful for figuring out why authentication isn't # working. auth_verbose = yes # Even more verbose logging for debugging purposes. Shows for example SQL # queries. #auth_debug = no # Maximum number of dovecot-auth worker processes. They're used to execute # blocking passdb and userdb queries (eg. MySQL and PAM). They're # automatically created and destroyed as needed. #auth_worker_max_count = 30 auth default { # Space separated list of wanted authentication mechanisms: # plain digest-md5 cram-md5 apop anonymous mechanisms = plain # # Password database is used to verify user's password (and nothing more). # You can have multiple passdbs and userdbs. This is useful if you want to # allow both system users (/etc/passwd) and virtual users to login without # duplicating the system users into virtual database. # # http://wiki.dovecot.org/Authentication # # PAM authentication. Preferred nowadays by most systems. # Note that PAM can only be used to verify if user's password is correct, # so it can't be used as userdb. If you don't want to use a separate user # database (passwd usually), you can use static userdb. passdb pam { # [-session] [<service name>] # # -session makes Dovecot open and immediately close PAM session. Some # PAM plugins need this to work. # # If service name is "*", it means the authenticating service name # is used, eg. pop3 or imap. args = imap #args = dovecot } # /etc/passwd or similar, using getpwnam() # In many systems nowadays this uses Name Service Switch, which is # configured in /etc/nsswitch.conf. #passdb passwd { #} # /etc/shadow or similiar, using getspnam(). Deprecated by PAM nowadays. #passdb shadow { #} # passwd-like file with specified location #passdb passwd-file { # Path for passwd-file #args = #} # checkpassword executable authentication #passdb checkpassword { # Path for checkpassword binary #args = #} # SQL database #passdb sql { # Path for SQL configuration file, see doc/dovecot-sql.conf for example #args = #} # LDAP database #passdb ldap { # Path for LDAP configuration file, see doc/dovecot-ldap.conf for example #args = #} # vpopmail authentication #passdb vpopmail { #} # # User database specifies where mails are located and what user/group IDs # own them. For single-UID configuration use "static". # # http://wiki.dovecot.org/Authentication # http://wiki.dovecot.org/VirtualUsers # # /etc/passwd or similar, using getpwnam() # In many systems nowadays this uses Name Service Switch, which is # configured in /etc/nsswitch.conf. userdb passwd { } # passwd-like file with specified location #userdb passwd-file { # Path for passwd-file #args = #} # static settings generated from template #userdb static { # Template for settings. Can return anything a userdb could normally # return, eg.: uid, gid, home, mail, nice # # A few examples: # # args = uid=500 gid=500 home=/var/mail/%u # args = uid=500 gid=500 home=/home/%u mail=mbox:%h/mail nice=10 # #args = #} # SQL database #userdb sql { # Path for SQL configuration file, see doc/dovecot-sql.conf for example #args = #} # LDAP database #userdb ldap { # Path for LDAP configuration file, see doc/dovecot-ldap.conf for example #args = #} # vpopmail #userdb vpopmail { #} # User to use for the process. This user needs access to only user and # password databases, nothing else. Only shadow and pam authentication # requires roots, so use something else if possible. Note that passwd # authentication with BSDs internally accesses shadow files, which also # requires roots. Note that this user is NOT used to access mails. # That user is specified by userdb above. user = root # Directory where to chroot the process. Most authentication backends don't # work if this is set, and there's no point chrooting if auth_user is root. # Note that valid_chroot_dirs isn't needed to use this setting. #chroot = # Number of authentication processes to create #count = 1 # Require a valid SSL client certificate or the authentication fails. #ssl_require_client_cert = no } # It's possible to export the authentication interface to other programs, # for example SMTP server which supports talking to Dovecot. Client socket # handles the actual authentication - you give it a username and password # and it returns OK or failure. So it's pretty safe to allow anyone access to # it. Master socket is used to a) query if given client was successfully # authenticated, b) userdb lookups. # listener sockets will be created by Dovecot's master process using the # settings given inside the auth section #auth default_with_listener { # mechanisms = plain # passdb passwd { # } # userdb pam { # } # socket listen { # master { # path = /var/run/dovecot/auth-master # #mode = 0600 # # Default user/group is the one who started dovecot-auth (root) # #user = # #group = # } # client { # path = /var/run/dovecot-auth-client # mode = 0660 # } # } #} # connect sockets are assumed to be already running, Dovecot's master # process only tries to connect to them. They don't need any other settings # than path for the master socket, as the configuration is done elsewhere. # Note that the client sockets must exist in login_dir. #auth external { # socket connect { # master { # path = /var/run/dovecot/auth-master # } # } #} Thanks! Rob

1 0

[Dovecot] signing dovecot certs with own Cert. Auth.
by blaq b0x 23 Sep '05

23 Sep '05

Hi, I'm trying to get apache, sendmail , and dovecot to use SSL certs signed by my own CA. I've got the apache certs working fine. However, dovecot ( I haven't even tried sendmail yet) doesn't seem to accept any of the certificates that I create for it. There is a script that comes with dovecot that creates self-signed certificates for you but, I need certificates signed by my own CA. I found this tutorial http://homepage.mac.com/pauljlucas/personal/macmini/certs.html it shows you how to create a csr for dovecot that you can send to a CA. I signed it using CA.pl -sign. however, the certificate isn't accepted by dovecot. Unfortunately, dovecot doesn't log anything to maillog at failed startup. Just looking at the certificate contents I noticed that the self-signed certificates don't have all kinds of publisher information at the beginning of them like the apache certs. So I think what I'm missing is the difference between all the different cert types. I know that there are pem and cert ssl cert types, at least different extensions. Can anyone tell my what the difference is? are the certs suitable for apache and others for mail applications? is there a converter? Could it be the way that I'm signing the certificates? Any help would be appreciated. Thanks, Reply With Quote __________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com

6 8

[Dovecot] login_process_per_user referred to but not present in dovecot.conf?
by Rob Frohne 23 Sep '05

23 Sep '05

Hi, I find login_process_per_user referred to in the comments in dovecot.conf, but never set. Is this a typo and should it be login_process_per_connection or what? Thanks, Rob

2 1

[Dovecot] Lost transaction log file in alpha2
by James Berry 23 Sep '05

23 Sep '05

I had run alpha1 pretty uneventfully for several weeks. I upgraded to alpha2 a couple of days ago and have since suffered two incidents of "Lost transaction log", resulting in the client being unable to access the mailbox until I "rm dovecot.index.log*" Sep 14 10:48:35 caddy dovecot: imap(jberry): Lost transaction log file /Users/jberry/Maildir/dovecot.index.log seq 1 I should point out that this is a server with a single imap user (myself) and that I know only one imap client was trying to access the server at that point in time (though the client sw Mail.app may have had multiple connections to the server). Any suggestions/ideas/thoughts on whether something might have changed in alpha2 to start causing this? James.

2 4

[Dovecot] auth-master socket access
by Lieven Van Acker 23 Sep '05

23 Sep '05

Hey, I'm doing a setup of dovecot (cvs) + postfix + dovecot lda (cvs). Is there any solution to the /var/run/dovecot/auth-master access restrictions, prohibiting the user running dovecot-deliver from communicating with the master (aside from the dirty and unsafe hack to reset the permissions of the /var/run/dovecot dir after starting dovecot)? Thanks, Lieven

3 2

[Dovecot] Can't donwload mails with some attacchments
by Lethux 23 Sep '05

23 Sep '05

Hi. Does anyone find the same problem with attachments bigger than few Ks? The client (thunderbird) waits for the file to be downloaded. It can be waiting for several minuts and tryies before having it from dovecot. Can it be something against the lock of the file, the processes or something else? Any workaround or bugfix in the stable/alpha rel? thanks. L.

2 1

[Dovecot] Shared access to mail accounts.
by Rory Campbell-Lange 23 Sep '05

23 Sep '05

We are intending to have some project mail accounts which many people (up to 10) will share. Will this work? Our configuration uses imap only, with maildir format mail storage. Thanks Rory -- Rory Campbell-Lange <rory(a)campbell-lange.net> <www.campbell-lange.net>

3 4

[Dovecot] Is Alpha2 slower than Alpha1?
by Marc Perkel 23 Sep '05

23 Sep '05

I changed servers at the same time as changing from Alpha1 to Alpha2 but I'm on a faster server so it should be faster. But it seems slower especially deleting server side messages. Using mbox . Anyone else seeing tis?

2 1

[Dovecot] Basic namespaces question
by David King 23 Sep '05

23 Sep '05

I can't find a generalised "What the heck are namespaces all about?" anywhere, can anyone point me to a decent one? More directly, my question is this: if I set up two non-hidden private namespaces (one for mbox and one for maildir), will a well-written IMAP client automagically list folders from both as if they were part of (or below) the same hierarchy, or do I have to set up two accounts, one with a prefix of (say) #mbox and one of #maildir? One step further, I'd like to eventually get mail from /var/mail/%u in mbox format, and in "maildir:%h/.maildir" or "mbox:%h/.mail", whichever exists (I'm migrating from imap-uw, and would like the benefits of maildir without forcing users to change their mailstores in case they use pop3 or tools like mail(1)). I'm willing to do some coding for it, but I imagine that it would be non-trivial if namespaces aren't automatically integrated

2 1

[Dovecot] courier imap --> dovecot imap
by Paul 'Google' Smit 23 Sep '05

23 Sep '05

Dear Readers of tha list... Please help me out! I currenty have Dovecot Imap installed but I still have some old Courier Imap files from an old server which I want to use. Can I, in any way, import of convert them so I can use it? Regards, Millman ------------------------------- Linux: Fedora Core 4 Sendmail: 8.13.4-2 Dovecot: 0.99.14-4 Squirrelmail: 1.4.6-0 -------------------------------

3 3

[Dovecot] trying to see different files
by David Willoughby 23 Sep '05

23 Sep '05

i am wanting to sort my email into different files per the different email lists i use. i've posted this before but nobody responded. is it possible to use dovecot and sort my mail into /home/dlw/Mail/file1, file2 etc.... ? -- David Willoughby email: dlw(a)d1w.org icq: 1852393

7 8

[Dovecot] bug? Maildir ... sync: UID inserted in the middle of mailbox
by Peter Gervai 23 Sep '05

23 Sep '05

Version: 1.00alpha2 Error: imap(grin): Maildir /home/grin/Maildir sync: UID < next_uid (94 < 95, file = 1127311363.H977932P25148.gollum:2,) imap(grin): Maildir /home/grin/Maildir sync: UID inserted in the middle of mailbox (95 > 94, file = 1127311363.H977932P25148.gollum:2,) This error reappears frequently. Doesn't go away by restarting dovecot, but does go away when I delete all index and cache and whatnot (and restart dovecot). Appears in 10 minutes again... Could be sylpheed-claws-whatever-alpha imap problem, but whatever the client does dovecot shouldn't be fall apart I believe. Peter

3 2

[Dovecot] Another address-spec problem
by Chris Wakelin 23 Sep '05

23 Sep '05

I've had complaints from users about "MISSING_DOMAIN" in header fields and I've tracked it down to having "." in an unquoted display name. By my reading of RFC2822 (especially section 4.1) A N Other <a.n.other(a)somewhere.org> "A. N. Other" <a.n.other(a)somewhere.org> are legal, but A. N. Other <a.n.other(a)somewhere.org> is "obsolete", but should be supported by the server (no clients should do it). I think the relevant syntax is phrase = 1*word / obs-phrase word = atom / quoted-string obs-phrase = word *(word / "." / CFWS) and rfc822_parse_phrase() should be modified to cope with "obs-phrase". I'll have a go, but if Timo or anybody knows how to do it properly, that would be better! Chris -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

2 2

[Dovecot] Debian packages of alpha2?
by Ben Beuchler 23 Sep '05

23 Sep '05

Is anyone maintaining Debian packages of alpha2? The official packages aren't even up to -stable yet. -Ben

2 1

[Dovecot] virtual passwords
by Michael Collins 22 Sep '05

22 Sep '05

I just set up postfix with some virtual domains and users. Dovecot made some dbs in /etc/dovecot. a passdb and userdb. the passdb file has passwords in there and I want to at least know what it is. I have tried to do 'echo -n mypassword | openssl md5 -hex' and insert that into them but it seems to not work. Probably something I am doing wrong. I looked at the archive and could not figure out how to search it. Anyway how do i change a password? Thanks. this is passdb: andreux@bla.com:$1$G/FqlOG5$Vj0xmc9fKY.UVr8OWr/7C1 andrew@bla.com:$1$G/FqlOG5$Vj0xmc9fKY.UVr8OWr/7C1 sikki@bla.com:$1$G/FqlOG5$Vj0xmc9fKY.UVr8OWr/7C1 amanda@bla.com:$1$G/FqlOG5$Vj0xmc9fKY.UVr8OWr/7C1 info@bla.com:$1$G/FqlOG5$Vj0xmc9fKY.UVr8OWr/7C1 help@bla.com:$1$G/FqlOG5$Vj0xmc9fKY.UVr8OWr/7C1 andrew@blu.biz:$1$G/FqlOG5$Vj0xmc9fKY.UVr8OWr/7C1 andreux@blu.biz:$1$G/FqlOG5$Vj0xmc9fKY.UVr8OWr/7C1 eric@blu.biz:$1$G/FqlOG5$Vj0xmc9fKY.UVr8OWr/7C1 jjenkins@blu.biz:$1$G/FqlOG5$Vj0xmc9fKY.UVr8OWr/7C1 -- -- Michael H. Collins It's us against them. Ride like you stole it. If you love some code, set it free. Please avoid sending me Word or PowerPoint attachments. See http://www.gnu.org/philosophy/no-word-attachments.html

1 0

[Dovecot] problem with postgreSQL connect=
by octane indice 22 Sep '05

22 Sep '05

Hello I'm using dovecot with virtual accounts stored in a postgreSQL db. I use in the dovecot.conf: auth_userdb = pgsql /usr/local/etc/dovecot-pgsql-user.conf (and same for pass). In the file dovecot-pgsql-user.conf, I use: connect = host=127.0.0.1 dbname=vmail user=lecteur password=lire user_query = SELECT '/var/spool/vhosts/'||nom_domaine||'/'||nom_boite AS mail,5000 AS uid, 5000 AS gid FROM boites WHERE email = '%u' It doesn't work. If I write: connect = dbname=vmail user=lecteur user_query = SELECT '/var/spool/vhosts/'||nom_domaine||'/'||nom_boite AS mail,5000 AS uid, 5000 AS gid FROM boites WHERE email = '%u' It works. Of course the query with psql works: psql -U lecteur -h 127.0.0.1 vmail -c "SELECT '/var/spool/vhosts/'||nom_domaine||'/'||nom_boite AS mail,5000 AS uid, 5000 AS gid FROM boites WHERE email = '%u' " with the password 'lire' My question: do I make something wrong? I want to use the network, because in future, dovecot will not be on the same host than postgreSQL. Thanks --------------------------------------------- Etes vous un consom'Acteur ? Toutes les saveurs équitables sont sur http://www.epicerie-equitable.com

1 0

[Dovecot] Lost transaction log file /Users/frohro/Maildir/dovecot.index.log.2 seq 1
by Rob Frohne 22 Sep '05

22 Sep '05

Hi, I got a bunch of the following errors: Lost transaction log file /Users/frohro/Maildir/dovecot.index.log.2 seq 1 when I was trying to apply some rules to move messages from one mailbox to another. Things hadn't been working well and I had recently upgraded to alpha 2, so I moved all dovecot* files in my Maildir/. Things then seem to work better. Rob -- Rob Frohne, Ph.D., P.E. E.F. Cross School of Engineering Walla Walla College http://www.wwc.edu/~frohro/

1 0