- dovecot - dovecot.org

[Dovecot] Re: dovecot Digest, Vol 26, Issue 10
by Paul 06 Jun '05

06 Jun '05

Claudio Succa wrote: > I succesfully configured dovecot-1.0test68 so that the same user can have both > a Mailbox and a Maildir and can access it by pop3, pop3s, imap and imaps > protocols with the same password. I have not very large acconts (26 users for > a total of 1.2 GBytes) but it is regularly running since the start of May. > > If that is the problem I will be glad to post the details about my > configuration; sorry for annoing instead. I would like those details. Paul

2 1

[Dovecot] The Kolab Storage Format, supported?
by Farkas Levente 06 Jun '05

06 Jun '05

hi, is dovecot are support all required feature for kolab imap server? the requirements can be found here: http://www.kolab.org/doc/kolabformat-2.0rc3-html/index.html ie. can i replace cyrus-imap with dovecot in a kolab server? thanks in advance. yours. -- Levente "Si vis pacem para bellum!"

3 4

[Dovecot] dovecot-auth defunct
by Oliver Schulze L. 06 Jun '05

06 Jun '05

Hi, I'm running dovecot-0.99.11-2.EL4.1 in RHEL4 and a couple of hours ago, I could not longer login in the imap or pop3 service. I noted that I have a process like this: root 8130 0.0 0.0 0 0 ? Z 16:55 0:00 [dovecot-auth] <defunct> It this ok to have a defunct proccess? I can not kill this process. I have to stop the dovecot service, killall pop3-login and imap-login and then start dovecot again. Is there a solution for this? Any hint? I already enabbled the debug of dovecot-auth. I have my user accounts on a local LDAP using nss_ldap. Many thanks Oliver -- Oliver Schulze L. <oliver(a)samera.com.py>

2 2

[Dovecot] Migration from pop3 to imapd
by Stephan Holl 06 Jun '05

06 Jun '05

Dear list, I am planing to set up dovecot-imapd on my production-mail server which currently only runs pop3 via qpopper on debian-sarge. It would be best, if I could only use imapd and use the existing pop3- server (qpopper) as it is. Is this possible? Can the user both use pop3 (qpopper) and imapd (dovecot) in parallel then? Where does dovecot-imapd store its mails? Does it store its mail in mbox-format in ~/mail, where also e.g. pine or mutt can access the mbox? Pretty dumb question I guess, but I want to make sure that nothing goes wrong during installation. It is a must that nothing changes on the server for my users. Best regards and thanks for your help Stephan Holl

6 5

[Dovecot] maildir create problem
by Alex 06 Jun '05

06 Jun '05

Hello, I got the error failed to create storage data. I changed some things and now I get the following message: mkdir(/home/mail/domain.nl/info/.Trash) failed: No such file or directory The directory for domain.nl is not created either. Other emailaccounts which were running very good already have no problem. Can anyone give me a direction what the problem could be? thanks, Alex

2 2

[Dovecot] Help on dovecot, imap, maildir and subfolders
by Lanhai Li 06 Jun '05

06 Jun '05

I have Fedora Core 2 and dovecot-0.99.10.5-0. I've done nothing to configure it but it seems to have found the Mail dir in my home directory ok and I can connect using IMAP. But I can't create subfolders. If I right click on inbox, there's a 'New Folder...', but if I create one then right click on it, no more 'New Folder...'. So it seems folders can only go one level deep. Many Thanks! Lanhai LI __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

[Dovecot] performance problem?
by Han-Wen Nienhuys 06 Jun '05

06 Jun '05

Hi, I'm running dovecot on a small server. I put all my mail from the last 10 years on it (approx. 160 mb). I'm seeing terrible performance. Sometimes, my client needs several minutes to display a message. This is with mutt, thunderbird and evolution. Copying an outbound message to the Sent IMAP folder (15k messages) typically takes a few minutes, but can be quite fast on occasion (Thunderbird). How can I debug this problem? I'm running dovecot .99.14 on a Mac Mini (OS X 10.3, 512 mb, 80 gb). -- Han-Wen Nienhuys - hanwen(a)xs4all.nl - http://www.xs4all.nl/~hanwen

3 3

[Dovecot] AUTH patch for Postfix 2.3?
by /dev/rob0 06 Jun '05

06 Jun '05

The 2.2.1 patch works fine on Postfix 2.2.3 but not on the 2.3 snapshots. Any plans to update it for 2.3? On a similar subject, Timo, are you going to try again to get it accepted by Wietse? If so I'd try to help out with the documentation part. I'm just not sure he'll accept it anyway, what with Dovecot auth only being used by Dovecot ... Thanks, BTW ... it works nicely and was very easy to set up. Postfix 2.2.x is good enough for me, for now. -- mail to this address is discarded unless "/dev/rob0" or "not-spam" is in Subject: header

2 1

[Dovecot] POP3 download problem
by Eddie du Plessis 06 Jun '05

06 Jun '05

Hi All I am experiencing a mail download problem with dovecot's pop3 protocol. We use outlook XP 2002 mail clients and I have setup a mail system with pop accounts on a Fedora 2 installation using dovecot. Some of the clients download email fine but others do not download email and also do not give any error messages. I have enabled the "verbose" options in the /etc/dovecot.conf and all the logged messages appear the same for those who get email and for those who don't. I listed the /var/spool/mail directory and can see mail in the accounts who do not seem to download. We are running an 80 - 90 user system. I have even tried IMAP on the clients with no success. There is nothing viable in the system log. I would appreciate it if you could help. Thank you Kind regards, Eddie Eddie du Plessis IT Administrator Now Media(PTY) Ltd 32 Fricker Road Illovo Boulevard Johannesburg Cell: 082 777 8110 Tel: 011 214 7302 Fax: 011 327 4094 www.nowmedia.co.za _________ "This e-mail, its attachments and any rights attaching hereto are, unless the contents clearly indicate otherwise, the property of Now Media (Proprietary) Limited. It is confidential, private and intended for the addressee only. Should you have received this email in error, kindly notify the sender and delete this e-mail immediately. Do not disclose or use this e-mail in any manner whatsoever. Views and opinions expressed in this e-mail are those of the sender, unless clearly stated as those of Now Media (Proprietary) Limited. Now Media (Proprietary) Limited accepts no liability for any loss or damages whatsoever and howsoever incurred or suffered, resulting or arising from the use of this email or its attachments. Now Media (Proprietary) Limited does not warrant the integrity of this e-mail or that it is free of errors, viruses, interception or interference."

4 4

[Dovecot] failed to create storage data
by Alex 06 Jun '05

06 Jun '05

Hello, I have a problem. I get the message 'Failed to create storage with data' I have 2 emailaccounts which are working perfect and that worked fine. But now I want to add another account and now it said 'Failed to create storage with data' What is the problem? I have the same rights on the directory and it worked first fine. I didn't changed it. Can any one point me in the good direction? I use dovecot with mysql and postfix. thanks in advance, Alex

2 5

[Dovecot] Maildir
by Jason P Buscema 06 Jun '05

06 Jun '05

I've spent most of the morning looking through the archives. Great information, however, I'm still unable to get my issues figured out. I believe I am missing something quite simple. From what I have read, I want to use maildir, mainly because it will allow the use of subfolders for my clients. My clients are running Mail.app (mostly) on 10.3 clients. I'm planning on using imap and my clients must be able to create sub folders to organize their email. I'm running into a couple problems. First, when I send an email to myself I see in the procmail log that it writes that message to: Folder: /Network/Servers/milhouse/Users/jpbuse/Maildir/new/msg.ZAgKB However, when I send a message to another user on the same server it writes the message to: Folder: /var/mail/someuser I don't understand why the home directory changed. I don't believe I have anything custom in my account vs anyone else. My second issue/question.. how do I get Mail.app and SquirrelMail to see the email now that is not no longer in ~/mail ? Home directories are in this format on the server: /home/users/j/jp/jpbuse Users are authenticated via LDAP and their home directory actually is: /Network/Servers/milhouse/Users/jpbuse I have a symlink that takes care of this and from what I can tell, works just fine. Changed the following line in /etc/dovecot.conf: default_mail_env = maildir:%h /etc/procmailrc looks like: # .procmailrc PATH=/usr/bin:/bin:/usr/local/bin MAILDIR=$HOME/Maildir DEFAULT=$MAILDIR/new PMDIR=/tmp/procmail LOGFILE=/var/log/procmail # Use SpamAssassin INCLUDERC=/etc/mail/spamassassin/spamassassin-spamc.rc dovecot-0.99 procmail-3.22 sendmail-8.13

3 2

[Dovecot] can't get md5 stored passwords to work
by Benjamin Engle 06 Jun '05

06 Jun '05

In my mysql database everyone has plain passwords. I set the password don my account to {PLAIN-MD5}md5sum but when I go to login it wont let me. But I can log in with "{PLAIN-MD5}md5sum" it's like it ignores the whole {scheme} thing. So I changed my dovecot-mysql.conf to: default_pass_scheme = PLAIN-MD5 In the password field for my username I just used the md5sum. I stopped dovecot and killed all remaining processes and then started it. But it doesn't try to do md5 it is still doing plain text. Anyone know what I'm doing wrong? I looked and there are no compile time options that I need for this to work... Dovecot Version 0.99.13

2 1

[Dovecot] dovecot.conf %d problem
by Martins 06 Jun '05

06 Jun '05

Hello, I have got a problem ir dovecod.conf. I would like to use %d in default_mail_env = maildir:/var/mail/vhosts/%d/%u/Maildir but %d seems to be empty. I need it for Postfix virtual domains. If I use default_mail_env = maildir:/var/mail/vhosts/DOMAIN.ORG/%u/Maildir mail folders could be accessed. I wonder, where Postfix virtual domains need to be passed to Dovecot? more config info: auth_userdb = static uid=100 gid=100 home=/var/mail/vhosts/%d/%u auth_passdb = passwd-file /etc/dovecot/pass Thanks in advance, M.

2 1

[Dovecot] SSL Certificate Chain Support
by Matthew P. Cox 05 Jun '05

05 Jun '05

Greetings. I was wondering if there were any plans to add support for an SSL certificate chain file? This is useful to provide a valid certificate chain for lower cost signing authorities. I'm afraid that I'm not 100% positive of the implementation requirements. Although it does seem that OpenSSL supports this concept. I am aware that Apache HTTPD (via mod_ssl) and Courier-IMAP offer support for this feature. Here's a link to information from the Apache HTTPD manual: http://httpd.apache.org/docs-2.0/mod/mod_ssl.html#sslcertificatechainfile Thank you for the continued development of a great project. Matt

2 1

[Dovecot] Re: dovecot Digest, Vol 26, Issue 5
by Han-Wen Nienhuys 05 Jun '05

05 Jun '05

dovecot-request(a)dovecot.org wrote: >Am Samstag, 4. Juni 2005 01:31 schrieb Han-Wen Nienhuys: > >>> I'm seeing terrible performance. Sometimes, my client needs several> > >(...) > >>> How can I debug this problem? I'm running dovecot .99.14 on a Mac Mini >> (OS X 10.3, 512 mb, 80 gb). > >mbox or maildir? Maildir. Listing or opening the directory via the OS is rather slow, btw, maagd:~/Maildir/.sent$ time du 220240 ./cur 0 ./new 0 ./tmp 234776 . real 1m35.207s user 0m0.060s sys 0m1.850s maagd:~/Maildir/.sent$ >I'm using an Am486DX4-100 with 64 MB to serve my personal mail. (about >650 >MB distributed over about 100 imap folders) indeed, so 160 mb on a beefier machine shouldn't be a problem. -- Han-Wen Nienhuys - hanwen(a)xs4all.nl - http://www.xs4all.nl/~hanwen

3 3

[Dovecot] pam mysql authentication
by radus＠smartpost.ro 04 Jun '05

04 Jun '05

Hello I am trying to use pam to authenticate dovecot again a mysql database. In /etc/pam.d/dovecot i have: auth optional pam_mysql.so host=localhost db=maildb user=mailro \ passwd=xxx table=users usercolumn=address passwdcolumn=passwd \ where="disabled is NULL and deleted = ''" crypt=1 account required pam_mysql.so host=localhost db=maildb user=mailro \ passwd=xxx table=users usercolumn=address passwdcolumn=passwd \ where="disabled is NULL and deleted = ''" crypt=1 I have the same file for smtp and it works ok. However when i try to log in dovecot i get: Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: is Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: NULL Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: and Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: deleted Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: = Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: ''" Jun 4 05:02:21 tx07 dovecot-auth: You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near '"disabled)' at line 1 I am running dovecot 0.99.14 Thanks, Radu

2 1

[Dovecot] Crash and Assertion Error
by Todd Burroughs 04 Jun '05

04 Jun '05

I've attached two backtraces, one from a segfault and another from an assertion error in imap. I've seen a couple of the same assertion and this is the only segfault. It looks like they could be related. They both have to do with indexing anyway... The code is from CVS as of May 30. The segfault happened while imap was doing searches for my pine filters. I've also noticed that in pine, if I expunge a lot of mail that is spaced out through my mbox, it usually gets the headers mixed up. What I mean is that I will open one email and get the body from another. Just mentioning this in case it has some bearing. I'll be trying some things out to see if I can figure out why this happens. Can't think of any more useful info, I need sleep. Todd

1 0

[Dovecot] pam mysql authentication
by radus＠smartpost.ro 04 Jun '05

04 Jun '05

Hello I am trying to use pam to authenticate dovecot again a mysql database. In /etc/pam.d/dovecot i have: auth optional pam_mysql.so host=localhost db=maildb user=mailro \ passwd=xxx table=users usercolumn=address passwdcolumn=passwd \ where="disabled is NULL and deleted = ''" crypt=1 account required pam_mysql.so host=localhost db=maildb user=mailro \ passwd=xxx table=users usercolumn=address passwdcolumn=passwd \ where="disabled is NULL and deleted = ''" crypt=1 I have the same file for smtp and it works ok. However when i try to log in dovecot i get: Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: is Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: NULL Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: and Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: deleted Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: = Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: ''" Jun 4 05:02:21 tx07 dovecot-auth: You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near '"disabled)' at line 1 I am running dovecot 0.99.14 Thanks, Radu

1 0

[Dovecot] 1.0-test72
by Timo Sirainen 02 Jun '05

02 Jun '05

http://dovecot.org/test/ I'm not sure if this was test71-specific or if it also happened with test70, but anyway IMAP process was hanging in some situations (I think POP3 hang was fixed though? :). So, fixed that.

3 2

[Dovecot] Virtual users with sendmail ...
by Jordan Hayes 31 May '05

31 May '05

A quick search of the Wiki for the term "sendmail" reveals zero hits. Are all Dovecot users just sufficiently enlightened that they don't use sendmail? :-) Anyone have any tips (other than to not use it)? Thanks, /jordan

1 0

[Dovecot] Script to convert mboxes to maildirs?
by Mark Winslow 31 May '05

31 May '05

Does anybody know of a script of a simple method of converting mbox mail stores to maildirs? I'm moving from an old pop3 system to imap and after installing about half our office with mboxes have found that mbox does not support subfolders which some people like to use. Is there any simple way of converting? I can go to each individual account and "manually" convert swaping data around with Firefox, but I was wondering if there was an easier way. Thanks. __________________________________ Discover Yahoo! Stay in touch with email, IM, photo sharing and more. Check it out! http://discover.yahoo.com/stayintouch.html

6 5

[Dovecot] Dovecot auth process died because of Socket operation on non-socket
by Nicolas STRANSKY 30 May '05

30 May '05

Hi, I'm having problems setting up a dovecot1.0 stable on a Debian-amd64 server. The process dies with the following message: May 28 15:13:46 rouge dovecot: Dovecot v1.0-stable starting up May 28 15:13:47 rouge dovecot: Login process died too early - shutting down May 28 15:13:47 rouge dovecot: pop3-login: fd_send(-1) failed: Socket operation on non-socket May 28 15:13:47 rouge dovecot: pop3-login: fd_send(-1) failed: Socket operation on non-socket May 28 15:13:47 rouge dovecot: auth(default): accept() failed: Socket operation on non-socket May 28 15:13:47 rouge dovecot: child 15116 (auth) returned error 89 May 28 15:13:47 rouge dovecot: child 15117 (login) returned error 89 May 28 15:13:47 rouge dovecot: child 15118 (login) returned error 89 Attached is the strace of the dovecot process, I don't know if this is relevant but I can provide any needed information. The config file is like this: protocols = imap imaps pop3 pop3s ssl_disable = no ssl_cert_file = /etc/ssl/certs/pop-imap-zamok.pem ssl_key_file = /etc/ssl/private/pop-imap-zamok.pem disable_plaintext_auth = no login_processes_count = 6 mail_extra_groups = mail default_mail_env = mbox:~/Mail/:INBOX=/var/mail/%u protocol imap { } protocol pop3 { } auth_verbose = yes auth_debug = yes auth default { mechanisms = plain passdb = pam userdb = passwd user = root } Can anybody help me with this issue ? Thank's in advance ! -- Nico Une pierre, deux maisons, trois ruines, quatre fossoyeurs, un jardin, des fleurs, un raton-laveur... -+- Jacques Prévert -+-

4 12

[Dovecot] creating first.last@domain.com as user account
by sam wun 28 May '05

28 May '05

Hi, Can I create first.las(a)domain.com user account using Dovecot? Sam

3 2

[Dovecot] How to create user account
by sam wun 28 May '05

28 May '05

Hi list, I just installed Dovecot and Postfix in FreeBSD 5.4 without installing Openldap. How can I create user account for Dovecot? I compiled Dovecot with Cyrus-sasl2-saslauthd in the system. Thanks Sam

1 1

[Dovecot] 1.0-test71
by Timo Sirainen 28 May '05

28 May '05

http://dovecot.org/test/ Nothing big this time: - Added configurable logging for login process. Added configurable pop3 logout string. Based on a patch by Andrey Panin. - mysql auth: dovecot-auth worker processed kill themselves after 10min idle time - fixed auth_cache crashing with sql/ldap backends (or was it only with mysql?) - fixed pop3 hang (finally I hope? :) - fixed mbox assert-crash about the file size being unexpected - Keyword resets were written using sequences to transaction log, which caused keyword breakages. - pop3: RSET command wasn't working right - dovecot-auth was leaking memory if used with Dovecot LDA/deliver

1 0

[Dovecot] Filenames and flags
by Jon 28 May '05

28 May '05

Hi, Does anyone know how the filnames as created and/or if you can read a mail's flag or status from it? 1 .As you can set i.e. "ToDo" label on a message and then if I open from another thunderbird I can see it is marked there aswell I wonder: Is this read from the filename or some registry? 2 .Can I understand from a filename if a message is read? 3. Sometimes when I try to filter with flags no messages show. Is this a thunderbird bug or a dovecot one, or one in conjunction? Best regards -Jon

2 1

[Dovecot] imaps tls/ssl and stupid clients
by Michael Moritz 28 May '05

28 May '05

We have been using dovecot now as replacement for qpopper for over 2 weeks and it's working nicely. I have now tried to enable ssl/tls for myself and other inhouse users which also works fine. But the problem is that I use an uncertified certificate. Which is not a problem for kmail, as it just pops up a box asking whether I want to accept the certificate or not. But apparently, some stupid email programs used by other people just hang up on an uncertified certificate. I have figured out that ssl_disable = yes is the critical setting. If it's set everything works, if not, then all services allow tls/ssl and the stupid clients choke on it. Since others just use pop3 I wonder whether there is a way I can disable tls support for pop3 but enable it for imap or even only for imaps? Any ideas or am I starting from the wrong side? Thanks and regards, mimo

2 1

[Dovecot] Excessive dovecot-auth proceses
by Andrew Hutchings 28 May '05

28 May '05

Hi Guys, I may have missed something in the conf file but while using a standard mysql auth method I'm finding many dovecot-auth processing sitting doing nothing. They grow to the extent that mysql runs out of connections after a week. Any ideas? Regards Andrew -- Andrew Hutchings (A-Wing) Linux Guru - Netserve Consultants Ltd. - www.domaincity.co.uk Admin - North Wales Linux User Group - www.nwlug.org.uk BOFH excuse 423: It's not RFC-822 compliant.

2 5

[Dovecot] Assertion Failure in mbox-sync.c
by Todd Burroughs 28 May '05

28 May '05

I've been getting a few of these errors on a couple different mboxes. This is using the CVS version as of May 14. So far, these are the only errors and it looks like most/all of the older ones are gone. (maybe I shouldn't say that ;-) dovecot: May 16 17:41:07 Error: 20973 IMAP(todd.bluegenesis.com): file mbox-sync.c: line 1165 (mbox_sync_handle_eof_updates): assertion failed: (file_size >= sync_ctx->file_input->v_offset) dovecot: May 16 17:41:10 Error: child 20973 (imap) killed with signal 6 (gdb) bt full #0 0xffffe410 in ?? () No symbol table info available. #1 0xbffff518 in ?? () No symbol table info available. #2 0x00000006 in ?? () No symbol table info available. #3 0x000051ed in ?? () No symbol table info available. #4 0xb7ef1d41 in raise () from /lib/tls/libc.so.6 No symbol table info available. #5 0xb7ef3529 in abort () from /lib/tls/libc.so.6 No symbol table info available. #6 0x0809911a in i_internal_panic_handler ( fmt=0x6 <Address 0x6 out of bounds>, args=0x51ed <Address 0x51ed out of bounds>) at failures.c:374 No locals. #7 0x08099534 in i_panic ( format=0x80a5ccc "file %s: line %d (%s): assertion failed: (%s)") at failures.c:173 No locals. #8 0x0806ef4b in mbox_sync (mbox=0x80c3ba8, flags=Variable "flags" is not available. ) at mbox-sync.c:1165 index_sync_ctx = Variable "index_sync_ctx" is not available. (gdb) bt #0 0xffffe410 in ?? () #1 0xbffff518 in ?? () #2 0x00000006 in ?? () #3 0x000051ed in ?? () #4 0xb7ef1d41 in raise () from /lib/tls/libc.so.6 #5 0xb7ef3529 in abort () from /lib/tls/libc.so.6 #6 0x0809911a in i_internal_panic_handler ( fmt=0x6 <Address 0x6 out of bounds>, args=0x51ed <Address 0x51ed out of bounds>) at failures.c:374 #7 0x08099534 in i_panic ( format=0x80a5ccc "file %s: line %d (%s): assertion failed: (%s)") at failures.c:173 #8 0x0806ef4b in mbox_sync (mbox=0x80c3ba8, flags=Variable "flags" is not available. ) at mbox-sync.c:1165 #9 0x08068891 in mbox_transaction_commit (_t=0x80cf430, flags=Variable "flags" is not available. ) at mbox-transaction.c:56 #10 0x0808d333 in mailbox_transaction_commit (t=0x0, flags=0) at mail-storage.c:418 #11 0x08058b56 in cmd_store (cmd=0x80bcb98) at cmd-store.c:122 #12 0x08059685 in _client_input (context=0x80bcb58) at client.c:334 #13 0x0809e5da in io_loop_handler_run (ioloop=0x80bb9b0) at ioloop-poll.c:184 #14 0x0809dcf9 in io_loop_run (ioloop=0x80bb9b0) at ioloop.c:218 #15 0x08060587 in main (argc=1, argv=0xbffffa44, envp=0xbffffa4c) at main.c:228 I'm not sure about the variables here, the core file's still here if any other info will help: (gdb) p sync_ctx->input->real_stream->statbuf $5 = {st_dev = 0, __pad1 = 0, __st_ino = 0, st_mode = 0, st_nlink = 0, st_uid = 0, st_gid = 0, st_rdev = 0, __pad2 = 0, st_size = 4294967295, st_blksize = 0, st_blocks = 0, st_atim = {tv_sec = 1116279667, tv_nsec = 0}, st_mtim = {tv_sec = 1116279667, tv_nsec = 0}, st_ctim = { tv_sec = 1116279667, tv_nsec = 0}, st_ino = 0} (gdb) p sync_ctx->file_input->v_offset $8 = 142294527 The mbox size is larger than 142294527 I did notice this, but I'm not sure if I'm looking at the correct variable and don't think the size is large enough to matter, anyway. (gdb) pt sync_ctx->input->real_stream->statbuf->st_size type = long long int (gdb) pt sync_ctx->file_input->v_offset type = long long unsigned int Todd

2 6

[Dovecot] Plain Text Auth
by Adam Barrett 28 May '05

28 May '05

I dont know where I went wrong, I have got the Dovecot finally looking for an auth, but it doesnt accept my passwords. Let me know what you need to see and I will post it... THanks! -- Adam Barrett dragen(a)gmail.com

2 3

[Dovecot] Migrating Dovecot 0.99 to 1.0stable
by Nicolas STRANSKY 28 May '05

28 May '05

Hi, I'm planing to move a big mail server currently under Dovecot 0.99 to Dovecot 1.0 stable. One problem I had once when doing this was that all the UIDL had to change and that all users using pop3 and leaving their messages on the server had to re-download all of them, which is annoying. I'd like to know to the UIDL really have to change when migrating from 0.99 to 1.0stable or if this was a configuration problem on my side. Are there any tips for this to be as transparent as possible for the users ? Thank you. -- Nico L'idée que la science peut et doit être organisée selon des règles à la fois fixes et universelles est utopique et pernicieuse. -+- Paul Feyerabend -+-

2 2

[Dovecot] 1.0-test70
by Timo Sirainen 28 May '05

28 May '05

http://dovecot.org/test/ - vpopmail authentication fix - many mmap_disable=yes fixes and a few optimizations - pop3 hang fix - mbox fix for "last-uid lost" error (hopefully last one) - mbox fix for losing dirty flag, causing lost message flags mmap_disable=yes seems to be finally working pretty well. There should be no more cache file related errors with it enabled. I'm still seeing "UID inserted in the middle of mailbox" error a couple of times in hour (out of ~320000 logins/h), so mbox code is still not perfect but I'd think it's good enough for normal use :)

5 20

[Dovecot] Dovecot as an email proxy
by sam wun 28 May '05

28 May '05

Hi list, I m new to Dovecot. I have installed the software in freebsd 5.4 and I m wondering how to setup up a mail proxy gateway that consist of Dovecot, postfix(or qmail), ASSP, Clamav in a box? I m very apprecate for every suggestion. Thanks Sam

1 0

[Dovecot] Transaction log file issue on dovecot-stable
by John and Catherine Allen 28 May '05

28 May '05

Situation: dovecot-stable-20050528 on x86, Linux 2.4.30, ext3, maildir I'm trying to use the imapsync utility (http://www.linux-france.org/prj/imapsync/) to copy 1500 messages from a UW-imap server to dovecot. After about 100 messages are successfully appended, I'm seeing this in the server log, following which all APPENDs fail. May 28 09:01:06 [dovecot] IMAP(allen): utime(/home/allen/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 28 09:01:06 [dovecot] IMAP(allen): Our dotlock file /home/allen/Maildir/dovecot-uidlist.lock was deleted May 28 09:01:06 [dovecot] IMAP(allen): Corrupted transaction log file /home/allen/Maildir/dovecot.index.log: Append with UID 3718, but next_uid = 3719 May 28 09:01:06 [dovecot] IMAP(allen): Lost transaction log file /home/allen/Maildir/dovecot.index.log seq 6 May 28 09:01:07 [dovecot] IMAP(allen): Lost transaction log file /home/allen/Maildir/dovecot.index.log seq 6 May 28 09:01:07 [dovecot] IMAP(allen): Corrupted transaction log file /home/allen/Maildir/dovecot.index.log: Append with UID 3718, but next_uid = 3719 John -- John Allen Bofferdange, Luxembourg allen(a)vo.lu http://www.homepages.lu/allen

1 0

Re: [Dovecot] imap disconnects on my account only
by Mitch Pirtle 28 May '05

28 May '05

Whups, reply-to went to the poster :-/ On 5/27/05, Chris Wakelin <c.d.wakelin(a)reading.ac.uk> wrote: > Just a guess, but have you changed your /etc/groups (or equivalent) file > today? I'm not a Fedora expert (or dovecot-0.99), though. I think it's > more likely to be a change in the user/group databases than a change in > Dovecot. I have added myself to another group (for a website directory) but have not changed my default group or anything like that. -- Mitch

3 3

[Dovecot] imap disconnects on my account only
by Mitch Pirtle 28 May '05

28 May '05

Talk about personal problems! I am using dovecot-0.99.13-4.FC2, and everything has been going fine for months. Earlier this afternoon, Thunderbird's status pane would say 'Sending authenticate login information...' and I would no longer receive email. When I checked with others, they were fine and dandy. I tried kmail, evolution, and even tried webmail. All had connection errors. Checking the logs I can see the following: May 27 14:07:58 mongo imap-login: Login: mitchy [162.84.141.200] May 27 14:07:58 mongo imap(mitchy): getgroups() failed: Invalid argument May 27 14:07:58 mongo dovecot: child 3264 (imap) returned error 89 I can see new messages in $Maildir, so it is all about authentication, which I am completely clueless about as it has been working for as long as I have had this server. What steps can I take to debug the situation? -- Mitch

2 1

[Dovecot] Index corruption
by Dan Sully 27 May '05

27 May '05

I've been seeing this in my log (test69) for a user who has Thunderbird as a client: Error: IMAP(andrew): Corrupted index file /home/a/andrew/Maildir/dovecot.index: header doesn't end with NUL Thoughts? -D -- <dr.pox> what're the units of the coefficient of agnosticity? I don't knows per hour?

1 0

[Dovecot] Inquiring about status of version 1.x
by Jean-Daniel Beaubien 27 May '05

27 May '05

Hi, I've been running dovecot for awhile (about 18 months now) and I am very happy with it. I am currently planning an upgrade for the office server and I am wondering how is 1.0 going? Is it stable enough for production? I read a thread in the list from may 5th talking about the stability, and it seemed pretty decent. Anyways just looking for a bit of feedback on the evolution of 1.0 Thanks, Jean-Daniel

2 1

Re: Core dumps when opening an IMAP folder (Was: Re: [Dovecot] 1.0-test70)
by Tero Ripattila 26 May '05

26 May '05

Hello Timo, I can reproduce this issue even with mmap_disable and mmap_no_write set to yes, please see the following back trace: $ gdb /usr/local/libexec/dovecot/imap /tmp/imap.core GNU gdb 6.3 Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-unknown-openbsd3.6"... Core was generated by `imap'. Program terminated with signal 11, Segmentation fault. Reading symbols from /usr/lib/libc.so.34.2...done. Loaded symbols for /usr/lib/libc.so.34.2 Reading symbols from /usr/libexec/ld.so...done. Loaded symbols for /usr/libexec/ld.so #0 0x1c03d7f2 in mail_transaction_log_view_set (view=0x3c020500, min_file_seq=8, min_file_offset=7148, max_file_seq=8, max_file_offset=7148, type_mask=8) at mail-transaction-log-view.c:102 102 if (min_file_seq == view->log->tail->hdr.prev_file_seq && (gdb) #0 0x1c03d7f2 in mail_transaction_log_view_set (view=0x3c020500, min_file_seq=8, min_file_offset=7148, max_file_seq=8, max_file_offset=7148, type_mask=8) at mail-transaction-log-view.c:102 file = (struct mail_transaction_log_file *) 0x2b1dbec8 first = (struct mail_transaction_log_file *) 0xb21b372 seq = 0 end_offset = 4324021345303134216 ret = 3932679 #1 0x1c03a17a in view_sync_get_expunges (view=0x3c01f700, expunges_r=0xcfbf97d0) at mail-index-view-sync.c:105 hdr = (const struct mail_transaction_header *) 0xe4e1c00 src = (struct mail_transaction_expunge *) 0xff src_end = (struct mail_transaction_expunge *) 0x3c011020 dest = (struct mail_transaction_expunge *) 0x0 data = (const void *) 0x23ee00 count = 1117130127 ret = 8 #2 0x1c03a366 in mail_index_view_sync_begin (view=0x3c01f700, sync_mask=255, ctx_r=0x8) at mail-index-view-sync.c:176 hdr = (const struct mail_index_header *) 0x3c01f804 ctx = (struct mail_index_view_sync_ctx *) 0x1c039b4d map = (struct mail_index_map *) 0xff mask = 8 want_mask = 0 expunges = {buffer = 0x0, element_size = 0} #3 0x1c02d6cd in index_mailbox_sync_init (box=0x3c01e840, flags=0, failed=0) at index-sync.c:150 ctx = (struct index_mailbox_sync_context *) 0x3c011020 sync_mask = 1006764673 #4 0x1c019b25 in maildir_storage_sync_init (box=0x3c01e840, flags=MAILBOX_SYNC_FLAG_FAST) at maildir-sync.c:991 ctx = (struct maildir_sync_context *) 0x3c0139b0 ret = 0 #5 0x1c040fc4 in mailbox_sync_init (box=0x8, flags=MAILBOX_SYNC_FLAG_FAST) at mail-storage.c:333 No locals. #6 0x1c015150 in imap_sync_init (client=0x3c020000, box=0x3c01e840, flags=MAILBOX_SYNC_FLAG_FAST) at imap-sync.c:43 ctx = (struct imap_sync_context *) 0x3c01d1c0 #7 0x1c01554f in cmd_sync (cmd=0x3c020040, flags=MAILBOX_SYNC_FLAG_FAST, tagline=0x3c00056f "OK Search completed.") at imap-sync.c:210 ctx = (struct cmd_sync_context *) 0x3c0230a0 #8 0x1c00eb66 in cmd_search (cmd=0x3c020040) at cmd-search.c:102 client = (struct client *) 0x3c020000 sargs = (struct mail_search_arg *) 0x8 args = (struct imap_arg *) 0x3c021048 args_count = 8 error = 0x0 charset = 0x0 #9 0x1c00fa7d in cmd_uid (cmd=0x3c020040) at cmd-uid.c:19 cmd_name = 0x3c0210f8 "SEARCH" #10 0x1c01023b in client_handle_input (cmd=0x3c020040) at client.c:334 client = (struct client *) 0x3c020000 #11 0x1c010369 in _client_input (context=0x3c020000) at client.c:383 client = (struct client *) 0x3c020000 cmd = (struct client_command_context *) 0x3c020040 #12 0x1c050a68 in io_loop_handler_run (ioloop=0x3c01d000) at ioloop-poll.c:184 data = (struct ioloop_handler_data *) 0x3c0110a0 pollfd = (struct pollfd *) 0x3c01e000 tv = {tv_sec = 7, tv_usec = 9219} io = (struct io *) 0x3c0111c0 t_id = 2 msecs = 8 ret = 0 call = 1 #13 0x1c050505 in io_loop_run (ioloop=0x3c01d000) at ioloop.c:218 No locals. #14 0x1c016d37 in main (argc=3, argv=0xcfbf9a3c, envp=0xcfbf9a4c) at main.c:228 No locals. (gdb) Any suggestions how to fix these ongoing problems? Thanks, Tero -- Tero Ripattila

1 0

[Dovecot] IMAP Memory Error
by John McAree 25 May '05

25 May '05

Hi, I recently upgraded dovecot on an OpenBSD server from the 0.99.x series to the 1.0-test series to eliminate a problem. That was fixed, however I am now experiencing issues with IMAP(S) connections. The main IMAPS use to the server is via Squirrelmail (many users login with it), however I typically use Thunderbird. The user mailboxes are stored in Maildir format. Basically, moving, deleting or copying mails tends not to work. I have managed to move mails in Thunderbird if the source mailbox is small, and deleting mails usually works in Thunderbird. However, in Squirrelmail deleting or moving results in: "ERROR : Connection dropped by imap-server. Query: COPY 5629 "<dest-mailbox>" /var/log/maillog reports: May 24 23:19:03 orca dovecot: IMAP(jmcaree): pool_system_malloc(): Out of memory The Out of memory error appears when moving mails with Thunderbird, also. I had originally upgraded to dovecot1.0-test66 via a patch supplied by an OpenBSD porter. Today I decided to compile -test70 to see if it was any better. Unfortunately, this issue still exists. I tried upgrading Squirrelmail to the latest (1.4.4 from 1.4.3a), but no luck there. Since it's happening with both it and Thunderbird, though, I don't see it being a client issue. Server is: # uname -a OpenBSD my.hostname.com 3.7 GENERIC.RAID#0 amd64 I'd appreciate any assistance or advice on this issue! Obviously, I'd prefer to not have to downgrade to the 0.99.x series. :-) I'm not subscribed to the list, so please CC me with any replies. TIA, John.

3 8

[Dovecot] Auth Issue
by Adam Barrett 25 May '05

25 May '05

I am so confused. Can someone help me out here? I have set it up so that it is to accept login via PLAIN TEXT. I am using Thunderbird to connect, and it will ask for my password (the username is already in the system) I get a pop-up for Enter the password for Username on Domain.com I enter my password (the same I would use to login to FTP) and it fails. Any thoughts? -- Adam Barrett dragen(a)gmail.com

3 2

[Dovecot] Simply can't figure it out
by Gaby vanhegan 24 May '05

24 May '05

Hi, I'm having a hideous problem trying to get the latest stable version to work. I've had no success and simply can't pinpoint the problem. Sorry for the rather long email but I've included as many details as I can to help here. I've been trying to install the latest stable version (as of 23rd May 2005) by downloading the tarball from the site to my OpenBSD 3.6 box, and building with these arguments: # ./configure --localstatedir=/var --with-ssl=openssl --with-ssldir=/etc/ssl --without-vpopmail - -without-pam --without-shadow Which builds fine. Here are some files from the installation folder: http://vanhegan.net/dovecot/config.log http://vanhegan.net/dovecot/config.status Here's my configuration file. I only really want to server imaps, but I've turned on imap for debuggering purposes: http://vanhegan.net/dovecot/dovecot.conf And it's running from my inetd.conf: # Dovecot IMAP services 144 stream tcp nowait root /usr/local/libexec/dovecot/imap-login imap-login --group=default/imap imaps stream tcp nowait root /usr/local/libexec/dovecot/imap-login imap-login --group=default/imap --ssl (I'm running on port 144 to not clash with the existing IMAP service on port 143). Now, no matter what I try, I simply can't make it login, or start the process: (restart inetd, dovecot, check they're dead) bash-3.00# kill -HUP `cat /var/run/inetd.pid` bash-3.00# kill -TERM `cat /var/run/dovecot/master.pid` bash-3.00# ps auwx | grep dove root 828 0.0 0.1 84 456 p2 S+ 8:39PM 0:00.01 grep dove bash-3.00# /usr/local/libexec/dovecot/imap-login --group=default/imap F/usr/local/libexec/dovecot/imap-login can be started only through dovecot master process, inetd or equilevant (start dovecot, check it's running, error expected, other imap server already running) bash-3.00# /usr/local/sbin/dovecot Fatal: listen(143) failed: Address already in use bash-3.00# ps auwx | grep dove root 14041 0.0 0.3 212 1012 ?? Ss 8:39PM 0:00.06 dovecot root 3496 0.0 0.2 276 608 ?? S 8:39PM 0:00.02 dovecot-auth root 10928 0.0 0.1 104 456 p2 S+ 8:40PM 0:00.01 grep dove (try and login) bash-3.00# /usr/local/libexec/dovecot/imap-login --group=default/imap Fatal: EOF while reading environment from master bash-3.00# tail /var/log/dovecot dovecot: May 23 20:34:19 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:35:06 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:00 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:04 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:07 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:07 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:07 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:38:57 Warning: Killed with signal 15 dovecot: May 23 20:39:39 Info: Dovecot v1.0-stable starting up dovecot: May 23 20:40:25 Error: login: Unknown protocol 'imap?W' (try an SSL login) bash-3.00# openssl s_client -connect localhost:993 CONNECTED(00000004) 24195:error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol:/usr/src/lib/libssl/ssl/../src/ssl/s23_clnt.c:475: bash-3.00# tail /var/log/dovecot dovecot: May 23 20:35:06 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:00 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:04 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:07 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:07 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:07 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:38:57 Warning: Killed with signal 15 dovecot: May 23 20:39:39 Info: Dovecot v1.0-stable starting up dovecot: May 23 20:40:25 Error: login: Unknown protocol 'imap?W' dovecot: May 23 20:44:20 Error: login: Unknown protocol 'imap?W' HELP PLEASE!!! I've scoured t'internet and the closest I can find is this: http://dovecot.org/pipermail/dovecot/2005-February/006284.html Which got me past the "missing protocol from server" problem but hasn't got anywhere. I've since fallen back to the version in ports from OpenBSD 3.6 but really want to get this going. Any ideas? Gaby -- Junkets for bunterish lickspittles since 1998! gaby(a)vanhegan.net http://weblog.vanhegan.net

4 6

[Dovecot] Newbie-ish Questions
by Joe Dauncey 24 May '05

24 May '05

Hi, I'm in the process of migrating from local Maildir, to IMAP-enabled Maildir (terms are made up by me). I have my Maildir directories all under $HOME/Mail I have a procmail script that sorts everything into different folders under $HOME/Mail, and leaves the rest in a Maildir folder chosen by me, that I think of as my INBOX. Now, I am assuming that the folder I identify as INBOX is the one that a client will interpret as the INBOX? I really want the INBOX to be one of the folders under $HOME/Mail, but at the moment dovecot only will only consider the folder $HOME/Mail as the INBOX, so I have to send my 'inbox' mail to $HOME/Mail, rather than what I would prefer, which would be $HOME/Mail/INBOX (or something like that). The seting I have in dovecot.conf is: default_mail_env = maildir:~/Mail Is this is the only way, or am I doing something wrong? Should I be using default_mail_env to define the inbox? e.g. with: default_mail_env = maildir:~/Mail:INBOX=INBOX (or whatever my inbox mail folder name is) Maybe I've just got my Maildir folder set up completely wrong, and I'm supposed to accept the Maildir folder itself as the inbox? If so, please just send me on my way ;-) Also, since I don't know much about IMAP, where can I find out what the .subscriptions file is, and what it does, and also all the other files created by dovecot, like the .imap files and the .customflags Thanks, Joe -- Joe Dauncey

3 5

[Dovecot] Read-only mail folders
by Chris Wakelin 24 May '05

24 May '05

Is it possible to have folders on read-only partitions in Dovecot 1.0-stable? We have a NetApp fileserver which would probably be accessed via NFS (though iSCSI is possible) and which stores readonly "snapshots" of every directory accessible as .snapshot (but usually hidden from the operating system). It would be very nice to set up a "snapshot" namespace something like :- namespace public { separator = / prefix = "#snapshot/" location = maildir:%h/Maildir/.snapshot/nightly.0 hidden = yes } so that users could recover messages from say yesterday's version of their mailbox. Unfortunately, Dovecot always seems to want to write to the directory, even when indexes are stored elsewhere (as recommended with NFS anyway, I think) using INDEX=whatever in the location line. Best Wishes, Chris --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+-- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

2 6

[Dovecot] problem with an howto from the wiki.
by kramer＠freemail.it 24 May '05

24 May '05

hello, i'm reading and trying to configuring my mailserver following this howto on the dovecot wiki: http://wiki.dovecot.org/moin.cgi/DovecotPostgresql but i got always this problem: ERROR: permesso negato per la relazione postfix_virtual in english is "permission denied for the relation postfix_virtual". I dont know where the problem is, but if i send an email from localhost all works good, the problem appear when i try to test my mailserver sending an email from another mta. this is what i got as error: Recipient address rejected: User unknown in local recipient table (in reply to RCPT TO command) excuse me in advance for my poor and ugly english. thanks! ciao, peppe --------------------------------------------------------------- Scegli il tuo dominio preferito e attiva la tua email! Da oggi l'eMail di superEva e' ancora piu' veloce e ricca di funzioni! http://webmail.supereva.it/new/ ---------------------------------------------------------------

2 1

[Dovecot] (no subject)
by Brent Clark 24 May '05

24 May '05

Hi all I just compiled Dovecot v1.0-test70 and i tried using the dovecot-example.conf for a quick test to see if the daemon would work. But I keep getting the following error message in me /var/log/messages: May 17 12:33:46 mail dovecot: Dovecot v1.0-test70 starting up May 17 12:33:47 mail dovecot: Auth process died too early - shutting down May 17 12:33:47 mail dovecot: auth(default): No password databases set May 17 12:33:47 mail dovecot: child 29405 (auth) returned error 89 This is is a section in my conf file. auth default { mechanisms = plain auth_userdb = passwd auth_passdb = pam #auth_userdb = passwd #auth_passdb = pam #userdb = /etc/passwd #passdb = /etc/passwd # passdb pam { # Service name or * as parameter. * means the authenticating service name # is used, eg. pop3 or imap. #args = dovecot # args= /etc/passwd # } # /etc/passwd or similar, using getpwnam() # In many systems nowadays this uses Name Service Switch, which is # configured in /etc/nsswitch.conf. # passdb passwd { # args= /etc/passwd # } # /etc/shadow or similiar, using getspnam(). Deprecated by PAM nowadays. # passdb shadow { # args= /etc/shadow # } # passwd-like file with specified location #passdb passwd-file { #} userdb passwd { } # passwd-like file with specified location #userdb passwd-file { # Path for passwd-file #args = #} # Path for passwd-file #args = #} # checkpassword executable authentication #passdb checkpassword { # Path for checkpassword binary #args = #} If anyone has some advice or tips, it would greatfully be appreciated. Kind Regards Brent Clark

2 5

[Dovecot] Stability
by Casey Allen Shobe 24 May '05

24 May '05

I am currently using Dovecot 0.99.14-r1 as provided by Gentoo, in a Qmail + VPopmail configuration. I am curious as to how to configure it to ensure the most stability, as it serves >1000 clients. I would rather disable any indexing that give small speed improvements if they are not known to be stable. Advice? Cheers, -- Casey Allen Shobe | http://casey.shobe.info cshobe(a)seattleserver.com | cell 425-443-4653 AIM & Yahoo: SomeLinuxGuy | ICQ: 1494523 SeattleServer.com, Inc. | http://www.seattleserver.com

2 1

[Dovecot] 1.0-stable loses flag changes sometimes?
by Chris Wakelin 24 May '05

24 May '05

I've been struggling with an odd bug in the latest 1.0-stable (20050427) release. Sometimes Dovecot seems to forget that a message has been read or deleted and marks it unread (or not deleted). As far as I've been able to determine, it seems to happen when 1) There have been several recent deliveries 2) Possibly some of those deliveries are of multiple messages 3) Possibly they are read very quickly (say only a second for each message) 4) Folder is an mbox (haven't tried Maildir) I've seen it with Thunderbird mostly, but did manage to recreate it once in "telnet" - the debug IMAP client ;) - using "IDLE" "FETCH" and "STORE msgid +FLAGS (\Seen)" commands. I managed to catch it in the act with one Thunderbird session, and it seemed to occur when Thunderbird, for some reason, issued an IMAP "CHECK" command. In this case it issued an extra "* 710 FETCH (FLAGS (\Recent))" response (the new messages had been msgid 711-715). Incidentally, Thunderbird seems to do a "STORE .. +FLAGS (\Seen)" command even though this is implicit the "FETCH .. BODY[..]" command (and it gets informed of the flag change in the response). I've tried and tried to find a "formula" for re-creating the problem "on demand", but it only goes wrong occassionaly. My guess is it's some sort of timing thing with mbox sync (BTW we have "mbox_dirty_syncs = yes" and "mbox_very_dirty_syncs = no"). Has anybody else seen this? I'm hoping to roll out this version to our wider group of testers soon and would like to get this issue solved first if possible (it counts as an annoyance rather than a serious problem). Best Wishes, Chris --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+-- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

5 15

[Dovecot] Info request
by Filip Cristian 23 May '05

23 May '05

Hello, I'am Filip Cristian System Administrator at Astral Telecom and i'am using on our email servers dovecot for pop*, imap* auth with mysql suport. I have noticed that in the 1.0-test* release you have support for multiple password databases. From what i have tested this it's working but only if you want to fallback to another supported password databases different that the privios. Is there a posibility to use multiple mysql authentication ? I mean to use two or more mysql hosts on wich to connect and search for the username if the user it's not in the first database? Best regards, -- Cristian Filip Network Administrator Astral Telecom Dostoievski 28, Cluj-Napoca Tel: 0364-100106 Fax: 0264-414688 http://www.astral.ro !DSPAM:4291eb3c217031927099527!

3 2

[Dovecot] dovecot and php imap_open
by Daniel 23 May '05

23 May '05

Hi I'm have problems with dovecot and the php imap_open function. Can't seem to get it to work. I just get a "Aborted login [127.0.0.1]" in the dovecot logs. The php error is: [client 192.168.1.254] PHP Warning: imap_open(): Couldn't open stream {127.0.0.1:110/pop3/notls/norsh/novalidate-cert}INBOX in /var/www/html/mail/auth.php on line 89, referer: [client 192.168.1.254] PHP Notice: (null)(): Can't open mailbox {127.0.0.1:110/pop3/notls/norsh/novalidate-cert}INBOX: invalid remote specification (errflg=2) in Unknown on line 0, referer: Same type of error with ether imap or pop3. Anyone have a trick around this? Thanks for any help. Regards Daniel

2 1

[Dovecot] pop3/commands.c query
by Jens Laas 23 May '05

23 May '05

Is this correct ? cmd_rset() if (mail_update_flags(mail, MAIL_SEEN, MODIFY_REMOVE) < 0) break; Args seems to be switched. /Jens ----------------------------------------------------------------------- 'This mail automatically becomes portable when carried.' ----------------------------------------------------------------------- Jens Låås Email: jens.laas(a)data.slu.se Department of Computer Services, SLU Phone: +46 18 67 35 15 Vindbrovägen 1 P.O. Box 7079 S-750 07 Uppsala SWEDEN -----------------------------------------------------------------------

2 1

Fwd: Re: [Dovecot] Newbie-ish Questions
by Joe Dauncey 23 May '05

23 May '05

I've just found out what it's doing, so I thought I'd include the useful symptom. Joe ----- Forwarded message from Joe Dauncey <joe(a)dauncey.net> ----- From: Joe Dauncey <joe(a)dauncey.net> Subject: Re: [Dovecot] Newbie-ish Questions To: dovecot(a)dovecot.org Date: Mon, 23 May 2005 08:18:04 +0100 Organization: dauncey.net User-Agent: Mutt/1.4.1i X-Mailer: Mutt/v1.4.1i Curtis, Thanks for the explanation... Unfortunately it doesn't quite work. On Mon, May 23, 2005 at 12:27:21PM +1000, Curtis Maloney wrote: > Joe Dauncey wrote: > >Hi, > > > > Please remember in future to always include which version of Dovecot > you're running. It sometimes makes a big difference. In this case, it > probably doesn't. > I'm running version 0.99.13-3 on Fedora Core 3 > >I'm in the process of migrating from local Maildir, to IMAP-enabled > >Maildir (terms are made up by me). > >I have my Maildir directories all under $HOME/Mail > >I have a procmail script that sorts everything into different folders > >under $HOME/Mail, and leaves the rest in a Maildir folder chosen by me, > >that I think of as my INBOX. > > Note that you'll likely have to tell your mail client to check all the > mailboxes procmail delivers too for new mail, not just INBOX (as most > default to). > I can do this by subscribing to the folders I want right? > >Now, I am assuming that the folder I identify as INBOX is the one that a > >client will interpret as the INBOX? > >I really want the INBOX to be one of the folders under $HOME/Mail, but at > >the moment dovecot only will only consider the folder $HOME/Mail as the > >INBOX, so I have to send my 'inbox' mail to $HOME/Mail, rather than what I > >would prefer, which would be $HOME/Mail/INBOX (or something like that). > > > >The seting I have in dovecot.conf is: > >default_mail_env = maildir:~/Mail > > > >Is this is the only way, or am I doing something wrong? > > > >Should I be using default_mail_env to define the inbox? e.g. with: > >default_mail_env = maildir:~/Mail:INBOX=INBOX (or whatever my inbox mail > >folder name is) > > You're almost there. Put the inbox path in as INBOX=~/Mail/INBOX.. so > you wind up with: > default_mail_env = maildir:~/Mail:INBOX=~/Mail/INBOX > > And I believe it will work. > I have set it up as default_mail_env = maildir:~/Mail:INBOX=~/Mail/.INBOX I've moved $HOME/Mail/cur (and tmp, new and dovecot-uidlist) all into .INBOX However, when I connect remotely I cannot see any mails, but if I open it locally (using Mutt) I can still see the mails in $HOME/Mail/.INBOX So, I'm not sure if there's something wrong with my .INBOX, or if it's not even looking there. When I move new mail to the inbox in the remote client, it moves the mail to $HOME/Mail, and creates cur/tmp/new/.customflags directly into that folder, instead of using .INBOX, which is the folder underneath that! Is it buffering some information/setting/mapping somewhere? I've restarted the dovecot daemon each time. > >Maybe I've just got my Maildir folder set up completely wrong, and I'm > >supposed to accept the Maildir folder itself as the inbox? If so, please > >just send me on my way ;-) > > > >Also, since I don't know much about IMAP, where can I find out what the > >.subscriptions file is, and what it does, and also all the other files > >created by dovecot, like the .imap files and the .customflags > > A lot of those files you shouldn't touch. They're mostly for the > internal workings of the server. > > .subscriptions is because IMAP is designed for mail and news, and allows > users to "subscribe" to some folders, or opt to not see them. This can > have a lot more meaning if you have shared folders (available in 1.0) or > news groups (outside the realm of this discussion). > > .customflags is (AFAIK) for storing details about any client custom > flags. As an example, Thunderbird allows you to tag e-mails into one of > 5 custom categories. It uses custom flags to mark this on the server. > > -- > Curtis Maloney > -- Joe Dauncey ----- End forwarded message ----- -- Joe Dauncey

1 0

[Dovecot] (no subject)
by Brent Clark 23 May '05

23 May '05

Hi all I have just finished installing / configuring my dovecot IMAP server. Im seeing something weird happing. It seems my Winblows Outlook users are experiencing a problem whereby when they delete an email, Outlook puts a line though the email, but the mail does not delete. Im not sure if this is a an outlook problem or a dovecot IMAP problem. I cant see anything in the conf file to suggest that it is a IMAP problem. If anyone has any tips or advice, it would greatfully be appreciated. Kind Regards Brent Clark

7 6

[Dovecot] utime() failed: Value too large for defined data type
by Brian Hechinger 22 May '05

22 May '05

i have recently rebuilt dovecot on my mail server as i wanted to add SSL support for it. well, my OpenSSL libs are 64-bit, so what they hey, i'll build dovecot 64-bit as well. worked just fine, no issues at all. the setup is: Solaris 9/SPARC Sun C compiler Dovecot 0.99.14 after rebuilding it 64-bit, i now have a small problem however. I cannot save messages to IMAP folders from Mail.app on OSX 10.3.9. OE6 and mutt work fine, no problems there, but when I try to save a message from Mail.app, it tells me it couldn't save the message and i get the folloing in my log file on the mail server: May 19 16:24:37 wiggum.4amlunch.net imap(paula): [ID 702911 mail.error] utime() failed for /usr/home/paula/Maildir/.Sent Items/tmp/1116534277.P10885Q0M105223.wiggum.4amlunch.net: Value too large for defined data type does anyone have any clue as to what could be the cause of this? i would say simple 64-bit uncleanliness issue, but why doesn't it also affect OE6 or mutt? there is some way that Mail.app accesses IMAP that is specifically tickling this problem. thank you very much for your time, and if there is any other information you might need to track this down, please ask and i'll get it right away. -brian -- "I fear death only slightly more than I hate my life." --8-bit Theater

1 1

[Dovecot] Active Directory Auth
by Juan Pablo Fava 20 May '05

20 May '05

Hi, this is my fist post :) I'm trying to authenticate users to Active Directory, but I don´t know how to set up dovecot-ldap.conf to do this. Specially user_filter and pass_filter attrs. Does someone have this configuration working? Thanks in advance. -- Juan Pablo Fava Ing. en Sistemas de Información

4 3

[Dovecot] dovecot deliver question
by Reuben Farrelly 17 May '05

17 May '05

Hi Timo, How much of the code base is shared between dovecot-lda and the dovecot CVS? I'm asking because when I tried out 'deliver' a few weeks ago I was seeing all sorts of nasty index corruption errors in the logs...and obviously lots of fixes have gone into core dovecot (but haven't seen many go into dovecot-lda) Reuben

2 1

[Dovecot] Dovecot-stable rpms
by Topher Fischer 17 May '05

17 May '05

I've been searching, and I can't find any rpms of dovecot stable for RHEL 4. Does anybody know where I can get one? Ever since we went from IMAP-UW to Dovecot, we've been having frequent problems with mbox corruption, and I've read that 1.0 fixes many of those types of problems. Has anybody else found an rpm for RHEL 4 of any Dovecot greater than 1.0? -- Topher Fischer System Administrator - TMCB 1140 GnuPG Fingerprint: 3597 1B8D C7A5 C5AF 2E19 EFF5 2FC3 BE99 D123 6674 javert42(a)cs.byu.edu

4 3

[Dovecot] Error in config
by Brent Clark 17 May '05

17 May '05

Hi Im trying dovecot for the first time, and I would like to get shared mail folders to work. I came acress this content (copied and pasted below). and the error I get is: Fatal: Error in configuration file /etc/dovecot/dovecot.conf line 204: Expecting '=' ===================================================== default_mail_env = maildir:~/Maildir namespace private { separator = / prefix = inbox = yes hidden = no } namespace public { separator = / prefix = Public/ location = maildir:/var/mail/public inbox = no hidden = no } namespace shared { separator = / prefix = Accounts/ location = maildir:/var/mail/accounts inbox = no hidden = no } =================================================== If anyone has and tips or advice etc, it would be most appreciated. Kind Regards Brent Clark

3 5

[Dovecot] Corrupted transaction log file, dotlocks..?
by John and Catherine Allen 16 May '05

16 May '05

I'm new to Dovecot but I've been able to get it up and running on a test basis without too much difficulty. I'm running dovecot-stable-20050508 with maildir, under Linux (an old Gentoo setup that's been stable for about 2,5 years). Mail client is Thunderbird. However, in the course of experimentally copying the accumulated household email (95000 emails from the last 10 years) from the existing IMAP server (UW-IMAP) using imapsync, I'm seeing some problems. While copying the 1000 or so messages from the main INBOX, Dovecot seems to hang after 50-100 messages and the following lines appear in the server log: May 15 18:45:21 [dovecot] IMAP(allen): utime(/home/allen/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 15 18:45:21 [dovecot] IMAP(allen): Our dotlock file /home/allen/Maildir/dovecot-uidlist.lock was deleted May 15 18:45:21 [dovecot] IMAP(allen): Corrupted transaction log file /home/allen/Maildir/dovecot.index.log: Append with UID 1827, but next_uid = 1828 May 15 18:45:21 [dovecot] IMAP(allen): Lost transaction log file /home/allen/Maildir/dovecot.index.log seq 4 May 15 18:45:21 [dovecot] IMAP(allen): Lost transaction log file /home/allen/Maildir/dovecot.index.log seq 4 May 15 18:45:21 [dovecot] IMAP(allen): Corrupted transaction log file /home/allen/Maildir/dovecot.index.log: Append with UID 1827, but next_uid = 1828 May 15 18:45:21 [dovecot] IMAP(allen): Lost transaction log file /home/allen/Maildir/dovecot.index.log seq 4 [...20 identical lines deleted....] May 15 18:48:27 [dovecot] imap-login: Login: allen [192.168.0.1] May 15 18:48:57 [dovecot] imap-login: Login: allen [192.168.0.1] May 15 18:48:57 [dovecot] IMAP(allen): Transaction log file /home/allen/Maildir/dovecot.index.log: marked corrupted I can restart after deleting the dovecot files in ~/Maildir, but the problem recurs. In other folders I've been able to copy large numbers of emails successfully with imapsync. I've not experienced any problems while accessing the folders with Thunderbird. I can't relate these log messages to anything in the configuration file or the documentation, so I'm wondering if I can ask for help? John -- John Allen Bofferdange, Luxembourg allen(a)vo.lu http://www.homepages.lu/allen

1 1

[Dovecot] redhat+dovecot+sendmail problem
by Magnus Polson 15 May '05

15 May '05

I got problem i don't know how to solve. Everything is working fine except that i cant send any html or attachments to the server....they never come to the inbox.. what can be wrong? -- _______________________________________________ Check out the latest SMS services @ http://www.linuxmail.org This allows you to send and receive SMS through your mailbox. Powered by Outblaze

2 1

[Dovecot] new-attrib lost when calling through pop3
by Marten Lehmann 15 May '05

15 May '05

Hi, I noticed, that all messages are moved from new/ to cur/ (using maildirs) after the authentication in pop3, even before the list command. I'm working with 1.0-stable-20050426. Why is this done? Shouldn't a message keep it's new-attrib as long as it isn't retrieved? This is how it worked with qmail-pop3d. Through imap, it works correctly. It's just sad if I can't distinguish between older and new emails with imap, just because I logged in through pop3 shortly before. Regards Marten

2 1

[Dovecot] fcntl lock timout on maildir format Trash .index file under OpenBSD sparc64
by Dale J. Robertson 15 May '05

15 May '05

Whenever I attempt to retrieve or delete mail (Using thunderbird win client) operation takes several minutes. right before completion posts the following error to maillog: May 14 10:22:04 NAPUtil imap(djrobert): Timeout while waiting for release of shared fcntl() lock for index file /home/djrobert/Maildir/.Trash/.imap.index deleting the index file speeds up the operation once. subsequent operations are slow again I don't know what other process is placing a lock on the file. or how to clear it. I am running the 9914p0 package distributed with a march 11 3.7 snapshot (OS loaded from the same snapshot). I previously was running the release 3.6 OS and the Dovecot package that came with the CD. both installs exhibit the same behavior. Both Dovecot and postfix are configured with fcntl locking only. What the heck am I doing wrong? Thanks, Dale

2 1

[Dovecot] Segfault in imap process
by Todd Burroughs 15 May '05

15 May '05

I'm running the CVS version from May 9. I've seen these errors in the log file before (every time I open my mailbox), but this is the first time it crashed. Todd dovecot: May 11 15:00:18 Error: 8438 IMAP(todd.bluegenesis.com): Corrupted index cache file /mailhome/new/t/b/todd.bluegenesis.com/.imap/INBOX/dovecot.index.cache: Duplicated field in header: hdr.RESENT-TO dovecot: May 11 15:02:00 Error: child 8438 (imap) killed with signal 11 Core was generated by `imap'. Program terminated with signal 11, Segmentation fault. (gdb) bt full #0 0x08074d10 in index_mail_get_flags (_mail=0x80c86d0) at index-mail.c:162 data = (struct index_mail_data *) 0x80c8734 #1 0x0808c86d in mail_get_flags (mail=0xb7c71834) at mail.c:32 No locals. #2 0x0805a6a5 in fetch_flags (ctx=0x80bee70, mail=0x80c86d0, context=0x0) at imap-fetch.c:444 flags = Variable "flags" is not available. (gdb) bt #0 0x08074d10 in index_mail_get_flags (_mail=0x80c86d0) at index-mail.c:162 #1 0x0808c86d in mail_get_flags (mail=0xb7c71834) at mail.c:32 #2 0x0805a6a5 in fetch_flags (ctx=0x80bee70, mail=0x80c86d0, context=0x0) at imap-fetch.c:444 #3 0x0805abdc in imap_fetch (ctx=0x80bee70) at imap-fetch.c:264 #4 0x0805676b in cmd_fetch (cmd=0x80bcb98) at cmd-fetch.c:165 #5 0x08059635 in _client_input (context=0x80bcb58) at client.c:334 #6 0x0809e1da in io_loop_handler_run (ioloop=0x80bb9b0) at ioloop-poll.c:184 #7 0x0809d8f9 in io_loop_run (ioloop=0x80bb9b0) at ioloop.c:218 #8 0x08060537 in main (argc=1, argv=0xbffffa84, envp=0xbffffa8c) at main.c:228 (gdb) frame #0 0x08074d10 in index_mail_get_flags (_mail=0x80c86d0) at index-mail.c:162 162 data->flags = data->rec->flags & MAIL_FLAGS_MASK; (gdb) p data->rec $3 = (const struct mail_index_record *) 0xb7c71834 (gdb) p data->rec->flags Cannot access memory at address 0xb7c71838

2 4

[Dovecot] dovecot through NFS
by Marten Lehmann 14 May '05

14 May '05

Hello, as our mail server load increases every day, I plan to scale the single mailserver in differnt units: 1x big storage server for all mailboxes, folders exported through NFS 1x smtp for mail-in (queue local, messages on storage server) 1x pop3/imap to retrieve the messages (config local, messages on storage server) Since we're using maildir only, there's no problem to get the messages into the mailboxes. But what about dovecot for retrieving them? NFS will be v3. Is locking still a problem with it? Might the indexes get corrupt? Regards Marten

2 1

[Dovecot] Fedora Core 3 and Mail.app problems
by Gordon Turner 14 May '05

14 May '05

Hello, first thanks for all the work, I appreciate the attention to security :-) I have a performance issue I am trying to solve. On my new server it would appear that synchronizing changes between the client and server is taking longer then my previous setup. I have recently upgraded from my old server to a new home (the basis for my comparison), From: - Redhat 9.0, uw-imap, using self-signed ssl certificates, on an old p-II. - Only one email user (me), about 40 mail folders with a few dozen messages in each. - Performance was never an issue, Mail.app took maybe 20 seconds to sync up minor deletes etc. To a new home: - Clean install of Fedora Core 3 on a p4, dovecot-0.99.13-3.FC3. - Copy of /home/gturner/mail directory to new server, ie existing mbox format from uw-imap. - Recreated new self-signed certificates on new server, manually added the self-signed certificates, connected with no problems. - Mail.app client, on OS X 10.3.9 (no Tiger yet). I deleted the account on Mail.app, and created it again, the first login/sync took a long time, which was expected. However after that, I noticed that when I first connect or delete a file the sync is slower then the old setup (FYI, I keep "Automatically synchronize changed mailboxes" checked on Mail.app). A result of this appears to be some corruption of some mailboxes, only one or two, nothing valuable. For example, I delete a file and then clear the trash while things are still syncing. So my current solution is to be patient. :-) Any suggestions? I know that I could covert everything over to maildir, but I would like some feedback to see if this would be reasonable. I also noticed that initially there are 3 'gturner imap' threads and the syncing seems to be flying along. Then the thread count goes to 5 or 6 and sync starts to crawl. I looked for a way to limit the number of spawned threads, but only saw stuff about 'waiting' threads or reference to 1.0. I have attached my dovecot.conf for reference. Any help is greatly appreciated, Gord Turner.

2 2

[Dovecot] Outlook strange behaviour...
by Francois Meehan 13 May '05

13 May '05

Hi all, I have a Dovecot server(dovecot-0.99.14) running with IMAP support, running on a Fedora 2 system. Outlook (2003) users receive duplicate mail, "the" second mail doesn't have a title, when clicking on it, we are getting "non fully downloaded" error message. When deleting the "orignal" mail, all duplicates gets deleted too. Any ideas? Thanks in advance, Francois Random Thought: --------------- Colors fade, temples crumble, empires fall, but wise words endure. - Edward Thorndike

1 0

[Dovecot] problem with test69
by Cor Bosman 13 May '05

13 May '05

Hi all, I noticed a problem with test69. I can recreate it with the following steps: - create a folder - copy about 200 emails from INBOX to this folder The copy succeeds, I can see with rawlog that it actually moves the 200 emails around. I can see on the spool that there are 200 emails. This is maildir, with spool over NFS. Now I immediately select the new folder. I now see only a part of the emails reported. And with rawlog I indeed see something like: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft Junk) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft Junk \*)] Flags p ermitted. * 158 EXISTS * 158 RECENT * OK [UNSEEN 3] First unseen. * OK [UIDVALIDITY 1115970206] UIDs valid * OK [UIDNEXT 217] Predicted next UID 2 OK [READ-WRITE] Select completed. My client faithfully reports 158 instead of 200. If I now close/open my client, and re-select, I see 200. This I can reproduce with several different clients, but its pretty obvious it isnt a client issue. I also reproduced this with different users. Anyone see this also? NFS issue? Cor

2 1

[Dovecot] dovecot 1.0-test69 io hangs
by Jens Laas 13 May '05

13 May '05

I've been testing test69 with pop3 (under Linux and with mbox). I began testing with a large inbox (11000 mails) and it seems the communication between dovecot and the mailclient (evolution) stalls after 1000-2000 messages transferred. I've looked in to the (non-trivial) io functionality of dovecot. What I see is that io_loop_handler_run() in ioloop-poll.c does not signal any more data (and eventually the whole thing timeouts). Evolution downloads the mailbox fine via qpopper. I tried turning on rawlog: mail_executable = /usr/libexec/dovecot/rawlog /usr/libexec/dovecot/pop3 I cannot find any logfile.. I must be missing something. Any help or ideas ? Cheers, Jens ----------------------------------------------------------------------- 'This mail automatically becomes portable when carried.' ----------------------------------------------------------------------- Jens Låås Email: jens.laas(a)data.slu.se Department of Computer Services, SLU Phone: +46 18 67 35 15 Vindbrovägen 1 P.O. Box 7079 S-750 07 Uppsala SWEDEN -----------------------------------------------------------------------

3 4

[Dovecot] "shared mailboxes"
by schnitzel meister 12 May '05

12 May '05

Hello, After a long search I've almost settled on dovecot as a pop3 and imap server. I have just one problem.. Rather than have a list support(a)company.com, I'd like to have a shared mailbox. The dovecot homepage explicitly states "Shared mailboxes aren't _yet_ supported." The sentence implies that they're planned - any idea when? Thanks

3 3

[Dovecot] IDLE command timeout
by Sim Harbert 12 May '05

12 May '05

Is it possible to change the IDLE command timeout to be more than 30 minutes? I have a client on my PalmOne Treo 600 which will stay in IDLE mode as long as it can. I would like to set the timeout to something much higher than 30 minutes. Maybe several hours or even more. I don't see a configuration setting for this value in "/etc/dovecot.conf". Am I missing something? Thanks, -Sim

2 5

Re: Re[2]: [Dovecot] 1.0-test69
by Andrew Hucthings 11 May '05

11 May '05

Its nothing special. Code is a bit sloppy as its a 5 minute bodge job, but it works. I use something similar to count number of logins. In mrtg.cfg: Target[pop2]: `/root/gotmail.php` MaxBytes[pop2]: 1000 Options[pop2]: gauge Title[pop2]: POP 21 Messages Statistics PageTop[pop2]: POP 21 Messages Statistics</H1> XSize[pop2]: 500 YSize[pop2]: 200 WithPeak[pop2]: dwmy YLegend[pop2]: No. of Messages ShortLegend[pop2]: Messages LegendI[pop2]:  Messages: LegendO[pop2]:  N/A: Gotmail.php: #!/usr/bin/php -q <?php $file = "/var/log/maillog"; $count=0; if($fp = fopen( $file, "r" )){ while(!feof($fp)){ $line = fgets($fp,128); if($p=strpos($line,"del=")) { $p2=strrpos($line,"/"); $str=substr($line,$p+4,$p2-$p-4); $count+=$str; } } fclose($fp); $file = "/var/log/mrtgpop2"; if($fp = fopen( $file, "r" )){ $line = fgets($fp,128); $linearray = split(" ", $line); $oldin=$linearray[0]; fclose($fp); } if($fp = fopen( $file, "w" )){ $write="$count 0\n"; fwrite($fp, $write); fclose($fp); } $nowin=$count-$oldin; echo "$nowin\n0\npop1.nsnoc.com\nPOP Messages\n"; echo "\n$oldin\n"; } ?> Regards Andrew On Wed, 2005-05-11 at 16:04 +0100, Jethro R Binks wrote: > Oooo, could you publish the code for extracting the data? > > (This patch looks cool, must upgrade soon!) > > > On Wed, 11 May 2005, Andrew Hucthings wrote: > > > Timo: Feature request here I think, I would love this patch (or > > similar) to be in the tree. Already creating mrtg graphs based on it to > > see what is really happening. > > > > Regards > > Andrew > > > > On Wed, 2005-05-11 at 16:21 +0200, Luigi Rosa wrote: > > > Hello Andrey Panin <pazke(a)donpac.ru>, > > > Monday, May 9, 2005, 9:19:57 AM, you wrote: > > > > > > > > > >> Gonna see if I can write a minor patch for dovecot this week so that we > > > >> can see number of messages downloading in a pop3 session in the logfile. > > > >> Similar to the way UW does it, will be very useful for us at work trying > > > >> to trace customers POP problems, I will submit it if anyone will find it > > > >> useful. > > > > > > AP> Don't waste your time :) Take a look at the attached patch. > > > > > > > > > It's GREAT! > > > > > > Is there any chance that will be included in the main build tree? > > > > > > > > > > > > Ciao, > > > luigi > > > > > -- > > Andrew Hutchings (A-Wing) > > Linux Guru - Netserve Consultants Ltd. - www.domaincity.co.uk > > Admin - North Wales Linux User Group - www.nwlug.org.uk > > BOFH excuse 371: Incorrectly configured static routes on the > > corerouters. > > > > > > . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > Jethro R Binks > Computing Officer, IT Services > University Of Strathclyde, Glasgow, UK > -- Andrew Hutchings (A-Wing) Linux Guru - Netserve Consultants Ltd. - www.domaincity.co.uk Admin - North Wales Linux User Group - www.nwlug.org.uk BOFH excuse 43: boss forgot system password

1 0

[Dovecot] 1.0-test69
by Timo Sirainen 11 May '05

11 May '05

http://dovecot.org/test/ - Several mbox fixes, upgrade recommended for test68 mbox users - Possibly fixes some IMAP hangs where Dovecot just stopped replying - Fixed delay-newmail workaround. It was badly broken before. And somewhat off topic advertisement: I got a bit distracted from Dovecot a week ago when a guy started mailing me about wanting to write an irssi2 client as a project to learn Ruby. Half a year ago I had written a semi-working irssi2 server but I got stuck with it because I wasn't interested about writing client for it. Now that the client actually works, irssi2's development has kind of exploded :) Irssi2 is a bit related to Dovecot too, in that it'll be integrated with it more or less tightly to provide instant messaging support. Nothing prevents extending irssi2-protocol to support all other kinds of realtime events either, for example to send new mail notifications. If you're interested, see: http://main.irssi.org/projects/irssi2.html And for the lazy, here's the introduction copy&pasted: Shortly put, irssi2 is to instant messaging what IMAP is to mail. You can safely exit your irssi2 client, and irssi2 server just keeps on going. When you connect back with your client, you can see all the discussion that happened while you were away (and even older discussion, too, if you want). You can also use multiple clients even at the same time, so you could for example keep one client always open at home and still be able to check what's going on with your mobile phone. Irssi2 clients are encouraged to keep their configuration in server side, so nothing should prevent you from temporarily using another irssi2 client from your friend's home with no other configuration needed than irssi2 server's address, your username and password. Irssi2 is designed to support multiple chat protocols (IRC, SILC, MSN, ICQ, etc.) but without ignoring hardcore IRC users. That means that unlike all other similar attempts (such as Jabber), irssi2's client-server protocol will actually allow fully featured irssi2 IRC client to be written with no compromises (but still the same client can be used to talk to MSN and elsewhere). Note that irssi2 isn't trying to replace IRC servers (yet ;). irssi2 server simply connects to normal IRC servers just as a regular IRC client. To prevent mixups with these terms, IRC servers are usually called "gateways" in irssi2.

5 6

[Dovecot] Dovecot Sendmail Maildir
by Gabriel Granger 11 May '05

11 May '05

Hi all, I'm using Debian (testing) for my office mail. I'm using sendmail and Dovecot to deliver email to clients over IMAP using mbox format. I want to move over and start using Maildir. I know that I can use different MTA's to do the job, but I really like sendmail, and I run additional sendmail servers across the my internal and external networks. I'm probably being anal, but I want to keep my MTA the same across the board. Does anyone here use sendmail + dovecot + maildir? if so what's the best way of going about this? Gabe

4 5

[Dovecot] Assertion failed in dovecot 0.99.14
by Quadriplegic Leprechaun 11 May '05

11 May '05

Hi, I am using the dovecot imap server on Linux 2.6.8.1. I get the following error when running it: imap(quad): Panic: file index-sync.c: line 25 (index_storage_sync_size): assertion failed: (messages > ibox->synced_messages_count) This usually occurs when I use imapfilter to move messages from one folder to another, while my client (thunderbird) is connected. Quad

4 3

[Dovecot] Outlook 2003 duplicates UIDL
by Alex Needham 10 May '05

10 May '05

Hi I have Redhat ES4.0 with dovecot-0.99.11-2.EL4.1 installed. Reading a post Outlook Duplicates issue is still killing me, there seems to be asolution to this, I was wondering when this will be available on redhat es40? # Note that Outlook 2003 seems to have problems with %v.%u format which is # Dovecot's default, so if you're building a new server it would be a good # idea to change this. %08Xu%08Xv should be pretty fail-safe. #pop3_uidl_format = %v.%u Rgds Alex

2 1

[Dovecot] Standard dirs
by Claudio Succa 10 May '05

10 May '05

Hi, thank to developers for such a flexible imap server. Is solves succesfully my needs to have a single passwd file for clients accessing both imap/imaps and pop3/pop3s protocols (on a diskless mail/web server with NFS maildirs and NFS indexes!). My question: With 1.0-test68 I have to set login_dir=/var/run/dovecot-login (just a dir not under /var/run/dovecot) instead of /var/run/dovecot/login. I guess that imap-login (running with uid=dovecot) can't access /var/run/dovecot/login if it is under /var/run/dovecot because it is set with permission 0700 and uid=root by dovecot. How can I run dovecot with its standard login_dir config? Claudio -- Claudio Succa PERTEL - Torino - Italy +39-011-437.4141 http://www.pertel.it http://www.uniassist.it http://www.progettocapolinea36.it

1 0

[Dovecot] start_tls on the user and password ldap connection
by Farkas Levente 10 May '05

10 May '05

hi, it seems when dovecot use ldap user and password databases it's not possible to use tls connection and certificate with the ldap connection. wouldn't it be possible to use the same certificate on the ldap connection as used in the ssl_{cert,key}_file parameters in the dovecot conf (or would be possible to use it's own cert in the ldap conf file? yours. -- Levente "Si vis pacem para bellum!"

1 0

[Dovecot] problems with ldap auth
by Nuno Lopes 10 May '05

10 May '05

I'm trying Dovecot v1.0-test43 with ldap authentication but can't seem to make it work. I'm getting the following errors in the log: dovecot: Sep 16 19:50:09 Info: Dovecot v1.0-test43 starting up dovecot: Sep 16 19:50:10 Error: Auth process died too early - shutting down What can I do to see where the error is? I have this configuration working with dovecot 0.99.xx . And if I replace the ldap authentication scheme with another one it starts up right. Following some past mailing list sugestions I've also tried removing most of the auth modules from the compilation but it made no diference. You can see my configuration files in: http://iluvatar.portugalmail.pt/dovecot/dovecot.conf http://iluvatar.portugalmail.pt/dovecot/dovecot-ldap.conf (I've intalled the binaries in /opt/dovecot) Don't know how much more data I can provide to help finding out what the problem is here (I think this won't be enough unless there's a known bug). Thanks, -- Nuno Lopes

3 2

[Dovecot] trouble getting digest-md5 & ldap working
by Udo Rader 09 May '05

09 May '05

hi, I am trying to set up dovecot with digest-md5 as authentication mechanism and openldap as passdb. My problem is ... that I just can't get it working. PLAIN authentication works as expected, but no luck with digest-md5. An excerpt from the two configuration files: dovecot.conf: --------CUT-------- auth = default auth_mechanisms = plain digest-md5 auth_userdb = ldap /etc/dovecot/dovecot-ldap.conf auth_passdb = ldap /etc/dovecot/dovecot-ldap.conf --------CUT-------- dovecot-ldap.conf: --------CUT-------- user_filter = (&(objectClass=posixAccount)(|(mail=%u)(uid=%n))) pass_filter = (&(objectClass=posixAccount)(|(mail=%u)(uid=%n))) default_pass_scheme = plain --------CUT-------- My dovecot installation with plain authentication and OpenLDAP has been quite mature for a long time, so I doubt that it is an issue with openldap. >From Cryrus-SASL I know that in order to get DIGEST-MD5 running it is required to have plaintext passwords in the DIT, but that does not solve anything. syslog tells me this: dovecot-auth: May 08 21:25:09 Error: ldap(frodo): No password in reply So any ideas on where I went wrong? Udo Rader BestSolution.at GmbH http://www.bestsolution.at

1 1

[Dovecot] transparent proxy
by Mark E. Mallett 09 May '05

09 May '05

I'm excited to see that dovecot 1.0-test series supports transparent proxy, but that excitement is muted by: - the recommendation to avoid 1.0 at present; - the requirement to use SQL authentication. I guess I could ignore the first, but the second is sticky. How hard would it be to hack a different sort of proxy server cue into the authentication? Perhaps one of: If authenticating via passwd, use a gid as an index into a server table (or perhaps have the group name be a server name), If passwd authentication fails, try a starting the proxy to a specific other server and see if one can log in there. Or something else.. I dunno, I'm just looking not to install a SQL server just for this. mm

4 3

[Dovecot] index file corruption
by Andy Pastuszak 09 May '05

09 May '05

Hello everyone. I am new to the list, so forgive me if this has been discussed already. My configuration is as follows: Fedora Core 3, fully patched through yum through today. Dovecot 0.9.9.13 Postfix 2.1.5 Using Maildir with Mail stored in ~/Maildir My issue is that, for some odd reason the inbox file index gets corrupt, There is no rhyme or reason as to why it happens or when, but a simple rm -rf ~/Maildir/.INBOX fixes everything (I assume because Dovecot rebuilds the index file.) Has anyone else on the list seen this? Is there some workaround for it? Andy

2 2

[Dovecot] Problem (?) with 1.0-stable
by Jakob Curdes 08 May '05

08 May '05

... Version from April 26, gives me the following errors in the imap log file : dovecot: May 04 09:56:58 Error: IMAP(m6933192-4): file mbox-sync.c: line 1262 (mbox_sync_do): assertion failed: (sync_ctx->ibox->mbox_sync_dirty) dovecot: May 04 09:56:58 Error: child 10721 (imap) killed with signal 6 This occurs sporadically and vanishes after some time. Is this something to worry about or not. I have mbox_dirty_syncs = yes Or does this just say "I am falling back to reading the whole mailbox"? Yours, Jakob Curdes

2 1

[Dovecot] pop3 messages not deleted
by Marten Lehmann 08 May '05

08 May '05

Hello, I'm currently experiencing, that 0 messages are shown at the pop3-prompt: list +OK 0 messages: . But the cur-folder containes 74 files. How can this happen? Why aren't they removed physically? Regards Marten Lehmann

3 5

[Dovecot] dovecot 0.99.14 and imaps (SSL) "hangs"
by Frode Nordahl 08 May '05

08 May '05

Hello, I just decided to try dovecot again after a long pause, and I must say that I am very impressed with the speed and resource usage, even when running with UNIX mailboxes. However, I have a problem with SSL. Every two minutes the connection is frozen, and the client has to reconnect after it times out waiting for a response from the server. My IMAP client fetches all headers, and then caches all messages in my mailboxes. However, if I do this while connected to dovecot using SSL (imaps, port 993) the connection times out roughly every two minutes, and the IMAP client must close the connection, reconnect and resume operations from where it left off. This makes resynching a 40000 message 300MB folder take VERY long :-) Using the same client, connected to the same server and syncing the same mailbox connecting to regular imap port (no TLS, port 143), everything works smoothly. The very same client, server and mailbox works flawlessly with uw-imapd and SSL. I have turned on rawlog, and everything seems to be OK. I am unable to dump the wire, because it's SSL, so not sure what to do to debug this. One thing I find a bit strange is that /var/run/dovecot/ssl-parameters.dat is a 0 byte file. Is this normal? Client: Apple Mail 1.3.11 (v622) Server: dovecot 0.99.14, installed from ports on FreeBSD 5 dovecot.conf: Regards, Frode Nordahl

6 8

[Dovecot] pop vs. imap inconsistancy
by jeff sacksteder 08 May '05

08 May '05

I am converting from courier and have noticed change in behaviour with Dovecot. I use maildirs with squirrelmail connecting by imap as well as a POP3 client. Courier would set the 'mail status-read' flag for any message which was downloaded with the POP3 interface. Dovecot apparently does not. Is this a bug or intended behaviour? If it is intentional, can it be changed with the config file?

2 1

[Dovecot] Outlook Duplicates issue is still killing me
by Jeff Ramsey 08 May '05

08 May '05

Hi, I have one pop3 client who has three computers, and he has Outlook XP on two, and 2003 on the third. They are all set to leave a copy of messages on the server, and that causes a duplicate message for every message he gets. I then can tell him to uncheck the "leave a copy on the server" box, and pop his mail, and the duplicates will go away for two or three days, only to start up again. I have a stock Fedora Core 2 server with dovecot and Sendmail. I do a nightly yum, so as to stay up2date. My version of dovecot is 1.0-test42. Has anyone else seen this issue? What can I do to fix it, short of permanently unchecking that box in Outlook? (The user is my boss, and he likes to get his email on all three computers...) -- Jeff Ramsey MIS Administrator Tubafor Mill, Inc.

4 3

[Dovecot] Compiling on Solaris 10
by Roger Oliver Clark 08 May '05

08 May '05

Trying to compile Dovecot on Solaris 10. I have tried the 99.14 release and today's 1.0-stable release. In both cases I get the following error message: if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/lib -I../../src/ lib-sql -I../../src/lib-settings -I../../src/lib-ntlm - DAUTH_MODULE_DIR=\""/usr/local/lib/dovecot/auth"\" -DPKG_LIBEXECDIR= \""/usr/local/libexec/dovecot"\" -I/usr/local/include -g -O2 -Wall - W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar- subscripts -Wformat=2 -Wbad-function-cast -I/usr/sfw/include -MT mycrypt.o -MD -MP -MF ".deps/mycrypt.Tpo" -c -o mycrypt.o mycrypt.c; \ then mv -f ".deps/mycrypt.Tpo" ".deps/mycrypt.Po"; else rm -f ".deps/ mycrypt.Tpo"; exit 1; fi In file included from /usr/include/unistd.h:18, from mycrypt.c:6: /usr/include/sys/feature_tests.h:336:2: #error "Compiler or options invalid; UNIX 03 and POSIX.1-2001 applications require the use of c99" make[3]: *** [mycrypt.o] Error 1 I am using gcc version 3.4.3 (csl-sol210-3_4-branch+sol_rpath) to do the build. It fails with just ./configure ; make The only thing useful I found on Google was this: http://www.mail-archive.com/openssl-dev@openssl.org/msg18884.html Can anybody help? Thank you, Roger

2 1

[Dovecot] Public Folders Using Dovecot
by Net Cerebrum 08 May '05

08 May '05

Are IMAP Public Folders supported by Dovecot. How do I configure / implement them ? I have not been able to find any references / documentation about it. TIA,

2 1

[Dovecot] Test68 and Namespaces
by Jim Summers 08 May '05

08 May '05

Hello List, I am in the process of building a new mail system here. I am hoping to eventually migrate my users from mbox storage to maildir. They have been using mbox forever and would rather get used to maildir slowly. So I have come upon the idea of using namespaces to provide the different mailstores. Since this isn't available in the current stable, or at least I could not figure out how to do it, I have been working with 1.0-test68 since it provides the ability to configure things with the namespaces. But I am seeing an error pop up in my maillog file when exiting the client, it is: ============================================ May 3 08:11:41 tbox dovecot: IMAP(sub4000): file mbox-sync.c: line 1371 (mbox_sync_do): assertion failed: (sync_ctx->mbox->mbox_sync_dirty) May 3 08:11:41 tbox dovecot: child 12717 (imap) killed with signal 6 ============================================ Wasn't sure if it is a code bug or if it is how I have the namespace entries setup. In my dovecot.conf file I have: ------------------------------------ namespace private { separator = / inbox = yes # prefix = "#mbox/" location = mbox:~/Mail/:INBOX=/var/mail/%u } namespace private { separator = / prefix = md/ location = maildir:~/Maildir } namespace private { separator = / prefix = mail/ hidden = yes } namespace private { separator = / prefix = ~/mail/ hidden = yes } namespace private { separator = / prefix = ~%u/mail/ hidden = yes } ------------------------------------ All seems to work except the message showing up in the logs. My goal/setup is to provide: 1. mbox delivery in the mailspool(/var/mail) from sendmail 2. access to existing ~/Mail/ mbox storage. 3. ability to begin setting up / migrating to maildir in ~/Maildir Is my namespace config above overkill / borken / wrong? Ideas / suggestions on this would be greatly appreciated. Environment: Server to be: RedHat AS EL4 Clients: Thunderbird, Evolution, mutt, pine, mailreader on OS/X. TIA -- Jim Summers School of Computer Science-University of Oklahoma -------------------------------------------------

2 1

[Dovecot] test-68 coredump
by Gregory Bond 08 May '05

08 May '05

I've tried upgrading from test-51 to test-68, with mixed results. It seems to fix the problem I had with imap and Thunderbird getting confused and not showing headers or body for some email. But something in dovecot is coredumping when I select certain mailboxes. Thunderbird just hangs when you select that mailbox, and mutt gets an EOF on the imap socket while "fetching message headers". Other mailboxes seem to run OK. The failing ones _might_ be empty or have only 1 message in them. Removing index files doesn't help. There is a core file in /var/run/dovecot, and file(1) says it's from dovecot-auth, but GDB can't make sense of the core with that executable, and the login has well and truly run when the core happens. (The core doesn't seem to be from the imap process either.) Any clues how I might debug this? [Solaris 2.8, gcc-3.3, dovecot test-68, imap+Maildir, Thunderbird 1.0.2 on OSX and mutt on Solaris]

2 1

[Dovecot] quota-command?
by Marten Lehmann 08 May '05

08 May '05

Hello, if you log in at hotmail.com, gmx, lycos or yahoo, you can see something like "using 1.4mb of 250mb total". Is there any IMAP command to check to current quota usage? Our webmail-interface will not have access to the filesystem to summarize the size of each file, so an IMAP-command would be great. I don't know if this would be a new feature or just part of the Maildir++ quota-system, that is not yet supported by dovecot. Regards Marten

2 1

[Dovecot] Migrating from courier-imap to dovecot
by Odhiambo Washington 08 May '05

08 May '05

Hello Gang, I am new to dovecot and the only reason (so far) I would like to use dovecot, and in production with 12k+ users, is the fact that it's supposed to be faster and less of a resource hog. Now, sometimes I am really good at reading the documentations but it sometimes happens that one overlooks something. I did read the migration notes three times! My users are in /etc/passwd and I am running dovecot in IMAP only mode. I did put default_mail_env = maildir:~/Maildir in dovecot.conf, then for one user, I did the following: cd ~wash/Maildir cp courierimapsubscribed .subscriptions # Then I edited to remove "INBOX." cp courierimapuiddb dovecot-uidlist The permissions are right, but when I login as this user, I don't see all the folders that had been there before when he was using courier-imap!! When I login to the web interface (we use Squirrelmail) and go to the Folder options, I can't see any folders to subscribe to either! Now my questions: 1. What am I overlooking?? 2. Does someone have a script that can be used to automate the copying of courierimapsubscribed to .subscriptions and that of courierimapuiddb to dovecot-uidlist, and the editing to remove the "INBOX."? I am sure I really don't have to reinvent the wheel, no? Meanwhile I am hitting google, while waiting for your answers. Thanks in advance. -Wash http://www.netmeister.org/news/learn2quote.html -- +======================================================================+ |\ _,,,---,,_ | Odhiambo Washington <wash(a)wananchi.com> Zzz /,`.-'`' -. ;-;;,_ | Wananchi Online Ltd. www.wananchi.com |,4- ) )-,_. ,\ ( `'-'| Tel: +254 20 313985-9 +254 20 313922 '---''(_/--' `-'\_) | GSM: +254 722 743223 +254 733 744121 +======================================================================+ Ducharme's Axiom: If you view your problem closely enough you will recognize yourself as part of the problem.

4 3

[Dovecot] How to check for keywords in IMAP store?
by Steffen Kaiser 08 May '05

08 May '05

Hello, I'm checking my way to migrate from Courier to Dovecot. Wiki says that "there's currently no easy way to migrate them [the keywords]". Frankly, I lack the information to check if some client is using keywords at all. More importantly, is it OK to assume that when SELECT INBOX returns no \* in OK [PERMANENTFLAGS ...] that the IMAP server does not allow keywords at all? [BTW: Is there a searchable mail archive of the Dovecot list?] Bye, -- Steffen Kaiser

3 2

[Dovecot] SquirrelMail IMAP protocol errors?
by Schettino, John Charles 08 May '05

08 May '05

I use Squirrelmail to filter messages, and it's doing this: raw log in: A009 UID SEARCH CHARSET ISO-8859-1 ALL Header X-Spam-Level {4} **** A010 LIST "" "spam" raw log out: * SEARCH A009 OK Search completed. * BAD Error in IMAP command : Unknown command. * LIST (\NoInferiors \Marked) "/" "spam" A010 OK List completed. it goes on like that in the log for every filter. What exactly is the BAD Error there, and is it something I can fix?

2 1

[Dovecot] Setting location for indexes
by dovecot.7.signal11＠spamgourmet.com 08 May '05

08 May '05

We have NFS-mounted user directories which cause significant problems with stale file handles: dovecot: IMAP(uid): fstat() failed with file /home/uid/mail/.imap/INBOX/dovecot.index.log: Stale NFS file handle (a) why can't it just close the file and re-open ? (b) is there a way to specify with the 'default_mail_env' (or in some other way) the location of **only** the indexes (and let dovecot autodetect all else?). I have already tried 'mmap_disable = yes', but that does not solve the problem, and if I set 'default_mail_env = INDEX=/var/spool/mail/INDEX/%u', I get errors like: IMAP(uid): Failed to create storage with data: INDEX=/var/spool/mail/INDEX/uid I don't want to specify mbox:~/mail/ or mbox:~/Mail/, because some users have one and some the other.

6 6

Re: [Dovecot] headers don't match message
by Brian Bartholomew 08 May '05

08 May '05

Kevin <angrycoggy(a)gmail.com> wrote: > once i had everything moved and dovecot running i checked my mail > via imap. all the messages appeared however when i try to read a > message the message body doesn't match the header info that's showed > in the message list. Gregory Bond <gnb(a)itga.com.au> wrote: > I see this a lot using Thunderbird & an old-ish dovecot (test-46 I > think). it is triggered by leaving thunderbird connected at work, > going home and accessing the same IMAP server from mutt at home. If > I use mutt in read-only mode it's fine, but if I delete any messages > in mutt, then the work Thunderbird gets very very confused. I'm using one of the stable 1.0 releases for 184 accounts on Gentoo Linux on Sparc. I too am seeing the message header/body mismatch in Thunderbird. Is the index file handling sufficiently robust against surprises that I can delete the dovecot index files every night out from under the logged-in imap sessions? Brian

2 1

[Dovecot] pop vs. imap inconsistancy
by jeff sacksteder 08 May '05

08 May '05

I am converting from courier and have noticed change in behaviour with Dovecot. I use maildirs with squirrelmail connecting by imap as well as a POP3 client. Courier would set the 'mail status-read' flag for any message which was downloaded with the POP3 interface. Dovecot apparently does not. Is this a bug or intended behaviour? If it is intentional, can it be changed with the config file?

1 0

[Dovecot] Help configuring dovecot for SSL
by Knute Johnson 04 May '05

04 May '05

Hi: I'm running dovecot on a Fedora 3 box and would like to be able to make a TLS connection to it with my Pegasus Mail program running on my Winblows machine. Does anybody know if it is possible? If it is I could really use some help configuring my dovecot. I have tried for several days but I really don't know what I'm doing and need a direction to start. Thanks, -- Knute Johnson Molon Labe...

2 2

[Dovecot] Multiple Logins - Single Mail Account
by Net Cerebrum 04 May '05

04 May '05

I have a mail account which needs to be accessed by 4-5 people simultaneously through IMAP. As of now I have configured it on the respective clients using the same username and password so we have multiple people accessing the same account through their mail clients simultaneously and it is working flawlessly. Is this alright or can it lead to some problems or corruption of data later ? What is the best way to allow multiple people to access a single mailbox for read as well as write operations ? Thanks,

3 4

[Dovecot] Segfault in imap
by Todd Burroughs 04 May '05

04 May '05

I'm running the current CVS version, as of April 26. There have been a few of these with the same problem. There was a NULL pointer dereference at mail-index-view.c:603 view->map == NULL Here's the log entry, etc. dovecot: May 03 08:30:08 Error: 10195 IMAP(support): UIDVALIDITY changed (1115122813 -> 1115123383) in mbox file /mailhome/new/m/2/support/mbox dovecot: May 03 08:30:13 Error: child 10195 (imap) killed with signal 11 Core was generated by `imap'. Program terminated with signal 11, Segmentation fault. (gdb) bt full #0 mail_index_view_open (index=0x80c2fc0) at mail-index-view.c:603 view = (struct mail_index_view *) 0x80c5608 #1 0x08077ccd in index_storage_mailbox_init (ibox=0x80c3bc8, index=0x80c2fc0, name=0x80a6cfe "INBOX", flags=Variable "flags" is not available. ) at index-storage.c:345 storage = Variable "storage" is not available. (gdb) bt #0 mail_index_view_open (index=0x80c2fc0) at mail-index-view.c:603 #1 0x08077ccd in index_storage_mailbox_init (ibox=0x80c3bc8, index=0x80c2fc0, name=0x80a6cfe "INBOX", flags=Variable "flags" is not available. ) at index-storage.c:345 #2 0x080679c2 in mbox_alloc (storage=0x80bc788, index=0x80c2fc0, name=0x80a6cfe "INBOX", flags=0) at mbox-storage.c:500 #3 0x080684e0 in mbox_open (storage=0x80bc788, name=0x80a6cfe "INBOX", flags=0) at mbox-storage.c:545 #4 0x0806863f in mbox_mailbox_open (_storage=0x80bc788, name=0x80a6cfe "INBOX", input=0x0, flags=0) at mbox-storage.c:603 #5 0x0808ce88 in mailbox_open (storage=0x0, name=0x80a6cfe "INBOX", input=0x0, flags=0) at mail-storage.c:295 #6 0x08057f9f in _cmd_select_full (cmd=0x80bcb98, readonly=0) at cmd-select.c:32 #7 0x08058171 in cmd_select (cmd=0x80bcb98) at cmd-select.c:97 #8 0x08059635 in _client_input (context=0x80bcb58) at client.c:334 #9 0x0809e04a in io_loop_handler_run (ioloop=0x80bb9b0) at ioloop-poll.c:184 #10 0x0809d769 in io_loop_run (ioloop=0x80bb9b0) at ioloop.c:218 #11 0x08060537 in main (argc=1, argv=0xbffffa44, envp=0xbffffa4c) at main.c:228 (gdb) p view->map $1 = (struct mail_index_map *) 0x0 (gdb) p index->map $2 = (struct mail_index_map *) 0x0 (gdb) p index->indexid $3 = 0

1 0