- dovecot - dovecot.org

New director features
by Timo Sirainen 12 Nov '14

12 Nov '14

I implemented a couple of larger director changes today. These could still be changed a bit if somebody has any ideas. http://hg.dovecot.org/dovecot-2.2/rev/b9df3d654710 Support for director "tags", which allow creating multiple Dovecot backend groups using a single director ring. So you can mark different backend hosts with @tag names and then have passdb lookup return the wanted tag for each user. Note that because director works using user hashes, two users with the same hash can't be in different backend groups. Use "doveadm director map -u user@domain" to see which hash is used by the user@domain. http://hg.dovecot.org/dovecot-2.2/rev/b9df3d654710 Added director_consistent_hashing=yes setting so users don't move around much when backend servers are added/removed. Ideally at some point this setting will be removed and directors will automatically switch to it when all the directors in the ring support it.

1 0

Re: Virtual User Authentication
by Joseph Tam 12 Nov '14

12 Nov '14

Jerry <jerry(a)seibercom.net> writes: > Personally, I am not a fan of this multiple file configuration scenario. Then don't use it. Concatenate all the included files together and throw out the settings you don't need. My (single) config file is ~340 lines, 2/3 of which are comments. Joseph am <jtam.home(a)gmail.com>

1 0

Re: Help with last_login plugin
by Pascal Volk 11 Nov '14

11 Nov '14

On 11/11/2014 08:55 PM, Jorge Bastos wrote: > Hi, > > > > I want to have a datetime column in my users table, to have the value > updated every time my users login via POP3/IMAP. > > Last_login is new but I don't see any query example, or field names or so. > > > > Does anyone can give an help on this? > This topic was discussed a few days ago. See http://dovecot.org/list/dovecot/2014-October/098300.html Regards, Pascal -- The trapper recommends today: cafefeed.1431522(a)localdomain.org

1 0

Help with last_login plugin
by Jorge Bastos 11 Nov '14

11 Nov '14

Hi, I want to have a datetime column in my users table, to have the value updated every time my users login via POP3/IMAP. Last_login is new but I don't see any query example, or field names or so. Does anyone can give an help on this? Thanks,

1 0

FTS-Solr: indexer-worker does not find mailbox
by Marc Stürmer 11 Nov '14

11 Nov '14

Greetings, I am running Dovecot v. 2.2.13 on a Gentoo Box. Mail users are virtual, data for them is stored in a MySQL-DB, Sieve is enabled and deliver is the LDA in conjunction with Postfix. This setup has been running for a few years now without problems, the configuration works. Some weeks ago the setup was still on a Ubuntu 12.04 LTS box, and Dovecot was v. 2.0.9. I've installed a Tomcat there with Solr and configured the FTS-Solr plugin from Dovecot. Worked like a charm without any problems at all. Now the same setup on the Gentoo box does not work at all; either indexer-worker does not find the directory or is just indexing 0 messages. Solr is also installed again (v. 3.6.0) on Tomcat, and Solr is running properly. I checked it with my browser and the logs, they are showing no errors. gentoo ~ # dovecot --version 2.2.13 dovecot -n: http://pastebin.com/NqLfrbp8 dovecot-sql.conf: http://pastebin.com/KLf4pjJZ Debug log. Nov 11 20:12:14 kraftzwerg dovecot: indexer-worker: Debug: auth input: mail(a)marc-stuermer.de home=/var/kunden/mail/ mail=maildir:marc/mail@marc-stuermer.de/ uid=9997 gid=9997 Nov 11 20:12:14 kraftzwerg dovecot: indexer-worker: Debug: Added userdb setting: mail=maildir:marc/mail@marc-stuermer.de/ Nov 11 20:12:14 kraftzwerg dovecot: indexer-worker(mail(a)marc-stuermer.de): Debug: Effective uid=9997, gid=9997, home=/var/kunden/mail/ Nov 11 20:12:14 kraftzwerg dovecot: indexer-worker(mail(a)marc-stuermer.de): Debug: Namespace : type=private, prefix=INBOX., sep=., inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:marc/mail@marc-stuermer.de/ Nov 11 20:12:14 kraftzwerg dovecot: indexer-worker(mail(a)marc-stuermer.de): Debug: maildir++: root=marc/mail(a)marc-stuermer.de, index=, indexpvt=, control=, inbox=marc/mail(a)marc-stuermer.de, alt= Nov 11 20:12:14 kraftzwerg dovecot: indexer-worker(mail(a)marc-stuermer.de): Debug: Namespace INBOX.: marc/mail(a)marc-stuermer.de doesn't exist yet, using default permissions Nov 11 20:12:14 kraftzwerg dovecot: indexer-worker(mail(a)marc-stuermer.de): Debug: Namespace INBOX.: Using permissions from marc/mail(a)marc-stuermer.de: mode=0700 gid=default Nov 11 20:12:14 kraftzwerg dovecot: indexer-worker(mail(a)marc-stuermer.de): Debug: Namespace : type=private, prefix=, sep=, inbox=no, hidden=yes, list=no, subscriptions=no location=fail::LAYOUT=none Nov 11 20:12:14 kraftzwerg dovecot: indexer-worker(mail(a)marc-stuermer.de): Debug: none: root=, index=, indexpvt=, control=, inbox=, alt= Nov 11 20:12:14 kraftzwerg dovecot: indexer-worker(mail(a)marc-stuermer.de): Debug: Syncing mailbox INBOX.gentoo failed: Mailbox doesn't exist: INBOX.gentoo Nov 11 20:12:14 kraftzwerg dovecot: imap(mail(a)marc-stuermer.de): Error: indexer failed to index mailbox INBOX.gentoo So the question is: where's the error and how to fix it? I am kinda clueless right now. Thanks in advance, Marc

1 0

Virtual User Authentication
by Jerry 11 Nov '14

11 Nov '14

I have only "virtual users" on the system that I maintain. I am using Postfix which is configured to use Devecot for authentication. I get several attempts everyday to hack into the system, both via Postfix and directly via Dovecot. The following is from the dovecot log: Nov 11 04:14:48 auth-worker(21005): Error: pam(monica,69.193.88.146): pam_authenticate() failed: authentication error (/etc/pam.d/dovecot missing?) Now, I do not use "pam" on this system. Is there a way I can eliminate Dovecot from trying to use it? -- Jerry

4 5

Replication Advice Needed
by Asai 11 Nov '14

11 Nov '14

I successfully set up Dovecot replication, having 2 servers syncing with each other. While I had both servers in the same room on a Gigabit network, they were syncing fine. But I took one to another location, and syncing was turned off for about 2 weeks. Now I've turned both back on, they're sort of syncing, but not really. The one remote server is not populating emails into various folders and it really should be cranking to sync those emails. Do anyone have any insights on how we could troubleshoot this? -- --Asai

1 0

deliver an email to a large number of local users directly via doveadm
by Mahdi Mahdi 11 Nov '14

11 Nov '14

Hello,We have a mail service that uses postfix and dovecot. We would like to send an email to a large number of users(about 100K). However, it takes too long to send the email through smtp. Is there any solution to deliver the email locally to all user mailboxes directly.dovecot uses lmtp for transfering local emails. the worst solutoin is that copy the email to all mailboxes via linux file system. But we would prefer to use some tools provided by dovecot like doveadm. is there any way to do this job?

2 1

help by recovering a mailbox - maildir and dovecot 2.2.13
by Götz Reinicke - IT Koordinator 11 Nov '14

11 Nov '14

Hi, an user screwd up his mailbox in such a way, that I dont see how to get it back in the right order. E.g. in the subcriptions file there is a folder Studienjahr 2014 - 2015.Pitchings in the filesystem there this folder is in trash and without spaces between the years: .Trash.Studienjahr 2014-2015.Pitchings in the Filesystem ther is no folder Studienjahr 2014-2015 Currently he uses our sogo as email client ant there are some folders to showing up but some are empty, some cant be deleted ... So any help and suggestion in recovering this structure is welcome! Regards . Götz -- Götz Reinicke IT-Koordinator Tel. +49 7141 969 82 420 E-Mail goetz.reinicke(a)filmakademie.de Filmakademie Baden-Württemberg GmbH Akademiehof 10 71638 Ludwigsburg www.filmakademie.de Eintragung Amtsgericht Stuttgart HRB 205016 Vorsitzender des Aufsichtsrats: Jürgen Walter MdL Staatssekretär im Ministerium für Wissenschaft, Forschung und Kunst Baden-Württemberg Geschäftsführer: Prof. Thomas Schadt

2 1

mail-storage.c:2222:mailbox_copy assertion failed: (!ctx->unfinished)
by Giel van Schijndel 10 Nov '14

10 Nov '14

Hi, I see a lot of crashes in my syslog lately. Specifically a sequence of errors exactly like this (only the timestamp differs). > Nov 10 21:29:53 khitomer dovecot: imap-login: Login: user=<user@hostname>, method=PLAIN, rip=XXXX, lip=YYYY, mpid=ZZZZ, TLS, session=<TTTT> > Nov 10 21:29:53 khitomer dovecot: imap(user@hostname): Panic: file mail-storage.c: line 2222 (mailbox_copy): assertion failed: (!ctx->unfinished) > Nov 10 21:29:53 khitomer dovecot: imap(user@hostname): Fatal: master: service(imap): child 35108 killed with signal 6 (core not dumped) I have the mail storage on ZFS, one separate filesystem per user and another for the lucene indexes. I.e. these are separate ZFS filesystems (not pools): > /var/mail/vhosts/%d/%n > /var/mail/vhosts/%d/%n/lucene-indexes Any idea what could be going wrong? partial config (without LDA, SSL and auth portions): > # 2.2.15: /usr/local/etc/dovecot/dovecot.conf > # OS: FreeBSD 10.0-RELEASE-p12 amd64 > mail_gid = mail > mail_location = maildir:~/Maildir/ > mail_plugins = acl mailbox_alias quota virtual > mail_privileged_group = mail > mail_uid = vmail > namespace { > list = yes > location = maildir:/var/mail/public:INDEXPVT=~/Maildir/public > prefix = Public. > separator = . > subscriptions = no > type = public > } > namespace { > list = children > location = maildir:%%h/Maildir/:INDEX=~/Maildir/shared/%%n > prefix = shared.%%n. > separator = . > subscriptions = no > type = shared > } > namespace { > location = virtual:~/Maildir/virtual > prefix = virtual. > separator = . > type = private > } > namespace inbox { > inbox = yes > location = > mailbox Drafts { > special_use = \Drafts > } > mailbox Junk { > auto = create > special_use = \Junk > } > mailbox Sent { > auto = create > special_use = \Sent > } > mailbox Trash { > auto = create > special_use = \Trash > } > mailbox virtual.All { > special_use = \All > } > prefix = > separator = . > } > plugin { > acl = vfile:/usr/local/etc/dovecot/global-acls:cache_secs=10 > acl_anyone = allow > acl_shared_dict = file:/var/mail/vhosts/%d/shared-mailboxes.db > antispam_backend = mailtrain > antispam_mail_notspam = -g > antispam_mail_sendmail = /usr/bin/nice > antispam_mail_sendmail_args = /usr/local/bin/python2;-W;ignore;/usr/local/bin/sb_filter.py;-d;%h/.hammiedb;-f > antispam_mail_spam = -s > antispam_spam = SPAM;Spam;Junk > antispam_trash = Trash > antispam_unsure = Filtered-Spam;Possible-Spam > fetchmail_pidfile = %h/.fetchmail.pid > fts = lucene > fts_autoindex = yes > fts_autoindex_max_recent_msgs = 30 > fts_decoder = decode2text > fts_index_timeout = 60 > fts_lucene = whitespace_chars=@. mime_parts > mailbox_alias_new = Sent Messages > mailbox_alias_new2 = Sent Items > mailbox_alias_old = Sent > mailbox_alias_old2 = Sent > quota = maildir:User quota > quota_grace = 10%% > quota_rule = *:storage=1G > quota_rule2 = Trash:storage=+100M > quota_rule3 = Junk:ignore > quota_rule4 = Possible-Spam:ignore > quota_rule5 = Filtered-Spam:ignore > recipient_delimiter = + > } > postmaster_address = postmaster@$hostname > protocols = imap lmtp sieve > quota_full_tempfail = yes > service auth-worker { > user = $default_internal_user > } > service imap-login { > inet_listener imaps { > port = 993 > ssl = yes > } > } > service imap { > drop_priv_before_exec = yes > } > userdb { > args = username_format=%u /usr/local/etc/dovecot/users > default_fields = home=/var/mail/vhosts/%d/%n > driver = passwd-file > } > protocol imap { > mail_max_userip_connections = 25 > mail_plugins = acl mailbox_alias quota virtual imap_acl zlib imap_zlib imap_quota expire fetchmail_wakeup antispam > } -- Met vriendelijke groet, With kind regards, Giel van Schijndel -- "It would seem that perfection is attained not when no more can be added, but when no more can be removed." -- Antoine de Saint Exupéry

1 0

mail location change results in various errors
by Cliff Hayes 10 Nov '14

10 Nov '14

I have a sendmail/dovecot imap/pop3 system that has been running with the following mail_location: mail_location = mbox:/var/empty:INBOX=/var/spool/mail/%u:INDEX=/var/indexes/%u In order to reduce errors and simplify operation I removed imap and am now only responding to pop3. I'd like to also simplify the mail_location to get rid of index errors since I don't need indexes: mail_location = mbox:/var/spool/mail:INBOX=/var/spool/mail/%n But when I applied the new mail_location I began to get the following five errors: Nov 6 23:17:24 sendmail dovecot: pop3(chayes): Warning: UIDVALIDITY changed (1132434125 -> 1205169149) in mbox file /var/spool/mail/chayes Nov 6 23:17:26 sendmail dovecot: pop3(chayes): Panic: Message unexpectedly expunged from index Nov 6 23:17:26 sendmail dovecot: pop3(chayes): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0() [0x3340045e2a] -> /usr/lib64/dovecot/libdovecot.so.0() [0x3340045e6e] -> /usr/lib64/dovecot/libdovecot.so.0(i_fatal+0) [0x3340019eb3] -> /usr/lib64/dovecot/libdovecot-storage.so.0() [0x3ef62567ed] -> /usr/lib64/dovecot/libdovecot-storage.so.0() [0x3ef6256e75] -> /usr/lib64/dovecot/libdovecot-storage.so.0() [0x3ef62928ed] -> /usr/lib64/dovecot/libdovecot-storage.so.0(index_mail_set_seq+0x76) [0x3ef6294ae6] -> /usr/lib64/dovecot/libdovecot-storage.so.0() [0x3ef625698c] -> dovecot/pop3() [0x405ec7] -> dovecot/pop3(client_command_execute+0x6d7) [0x4071c7] -> dovecot/pop3(client_handle_input+0x78) [0x405618] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x3340052c36] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run+0xa7) [0x3340053a57] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x3340052778] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_run+0x13) [0x334003e3c3] -> dovecot/pop3(main+0x283) [0x403cc3] -> /lib64/libc.so.6(__libc_start_main+0xf5) [0x359f821a05] -> dovecot/pop3() [0x403e2d] Nov 6 23:17:26 sendmail dovecot: pop3(chayes): Fatal: master: service(pop3): child 3358 killed with signal 6 (core dumps disabled) Nov 6 23:18:00 sendmail dovecot: pop3(jbkirk): Error: open(/var/spool/mail/.imap/INBOX/dovecot.index.log) failed: Permission denied (euid=2151(jbkirk) egid=12(mail) missing +r perm: /var/spool/mail/.imap/INBOX/dovecot.index.log, dir owned by 3575:12 mode=0770) dovecot -n output # 2.1.16: /etc/dovecot/dovecot.conf # OS: Linux 3.9.2-200.fc18.x86_64 x86_64 Fedora release 18 (Spherical Cow) ext4 auth_mechanisms = plain login auth_verbose = yes auth_verbose_passwords = plain disable_plaintext_auth = no mail_location = mbox:/var/empty:INBOX=/var/spool/mail/%u:INDEX=/var/indexes/%u mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } protocols = pop3 ssl = no ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } What do I need to do to transition to the new mail_location without the errors? Thanks in advance.

1 0

Performance issue
by absolutely_free＠libero.it 10 Nov '14

10 Nov '14

Hi, Since few days I noticed very high load on my mailserver (Centos 6.6 64bit, 8 GB RAM, 2 x CPU 3.00GHz I am using Dovecot + Postfix + Roundcube + Nginx. I have about 10000 users. Spool is on network attached storage (Coraid). File system is ext4 (mounted with noatime). Problem appears almost every morning (while load is normal during afternoon). I suspect that this can be related to some user that have so many messages in his mailbox. How can I troubleshoot this? Here some messages that I got in maillog: Warning: Maildir: Scanning /var/spool/pop/domains/xxxx.it/YYYYYYYYY/Maildir/new took 71 seconds (1 readdir()s, 1 rename()s to cur/) Warning: Maildir /var/spool/pop/domains/zzzz/WWWWWWWWWWWW/Maildir/.Trash: Synchronization took 74 seconds (5 new msgs, 0 flag change attempts, 0 expunge attempts) dovecot: imap(xxxx(a)zzzz.it): Warning: Inotify instance limit for user 89 (UID postfix) exceeded, disabling. Increase /proc/sys/fs/inotify/max_user_instances tail: inotify cannot be used, reverting to polling: Too many open files My relevant dovecot conf: mail_location = maildir:/coraid-s2l2/domains namespace { type = private separator = . prefix = INBOX. inbox = yes } mail_uid = 89 mail_gid = 89 mail_fsync = never first_valid_uid = 89 first_valid_gid = 89 maildir_very_dirty_syncs = yes mbox_write_locks = fcntl thank you very much!

2 1

Best practise for deleting with Thunderbird
by Stefan G. Weichinger 09 Nov '14

09 Nov '14

As I mentioned in another thread I set up these 2 namespaces for a couple of users: namespace { inbox = yes location = prefix = separator = / type = private } namespace { location = maildir:/home/vmail/oeffentlich:INDEXPVT=/home/vmail/public/index/%d/%u/index prefix = Oeffentlich/ separator = / subscriptions = yes type = public } It is planned that they all will use Thunderbird (on MS Windows) to access their mailboxes. Now when I create a folder in the public space and try to delete it via thunderbird I get something like: "Renaming not supported across non-private namespaces" As far as I found out by browsing the web this is related to Thunderbird trying to move (=rename) the mail from the public to the private namespace, correct? Setting TB to immediately remove mails (tested that, this works) seems a bit scary to me: this removes a safety layer for the users because this would also apply to their personal maildirs. Is there any more elegant way of solving this? Do I have to set up some kind of ACLs? Some kind of "public paperbin folder" ?? Pls help me to understand this better ;-) Regards, Stefan

3 6

Improvement proposal
by Jorge Bastos 09 Nov '14

09 Nov '14

Hi, I'd like to purpose a small improvement. When a user has a quota set in message limit instead of bytes, the returning message it's the same as in bytes limit quota (Quota exceeded (mailbox for user is full)) If possible, when the user has the message limit, it could return something different like: Quota exceeded (max messages reached for user) Thanks, Jorge,

1 0

Re: Help on dict with QUOTA / perms
by Gedalya 09 Nov '14

09 Nov '14

On 11/08/2014 10:55 AM, Jorge Bastos wrote: > Hi, > > Ok managed to solve this with the permissions on the socket. > > One related question, the quota units are only Kb,M,G ? not possible to > define it in bytes? You can http://wiki2.dovecot.org/Quota/Configuration#Limit_configuration

2 1

Dovecot quota via custom column
by Filip Bartmann 08 Nov '14

08 Nov '14

Hello, we have multiple domains connected to single user account and we want to have quota counted via this column - called account_id. Users are stored in mysql database. --------------------------------------------------------------------------------- iterate_query = SELECT email AS user FROM mailboxes user_query=SELECT email, 501 AS uid, 501 AS gid, CONCAT('*:storage=',quota,'M') AS quota_rule FROM mailboxes AS m WHERE email='%u' password_query=SELECT email AS user, pw_hash AS password, CONCAT('*:storage=',quota,'M') AS userdb_quota_rule FROM mailboxes AS e WHERE email='%u' --------------------------------------------------------------------------------- We have quota stored in dovecot dictionary and as usable variables we found only - http://wiki2.dovecot.org/Variables. Is there any way to do use account_id as quota username? Thanks, Filip Bartmann

1 0

RE: Help on dict with QUOTA / perms
by Jorge Bastos 08 Nov '14

08 Nov '14

Hi, Ok managed to solve this with the permissions on the socket. One related question, the quota units are only Kb,M,G ? not possible to define it in bytes? > -----Original Message----- > From: dovecot [mailto:dovecot-bounces@dovecot.org] On Behalf Of Jorge > Bastos > Sent: sábado, 8 de Novembro de 2014 14:22 > To: 'Dovecot Mailing List' > Subject: Help on dict with QUOTA / perms > > I'm setting up quota for my users, my users have a UID starting on > >5000 and GID = 5000, and when I query the quota, for example in IMAP, > I get: > > > > Nov 8 14:13:28 fastmail dovecot: imap-login: Login: user=<a(a)a.com>, > method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=18660, secured, > session=<uByciFkH2gB/AAAB> > > Nov 8 14:13:37 fastmail dovecot: imap(a(a)a.com): Error: > net_connect_unix(/var/run/dovecot/dict) failed: Permission denied > (euid=5000(<unknown>) egid=5000(<unknown>) missing +r perm: > /var/run/dovecot/dict, dir owned by 0:0 mode=0755) > > > > Question is, should I have the GID on the users set to 0, or is there > another way to workaround it? > > > > Thanks,

1 0

Help on dict with QUOTA / perms
by Jorge Bastos 08 Nov '14

08 Nov '14

I'm setting up quota for my users, my users have a UID starting on >5000 and GID = 5000, and when I query the quota, for example in IMAP, I get: Nov 8 14:13:28 fastmail dovecot: imap-login: Login: user=<a(a)a.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=18660, secured, session=<uByciFkH2gB/AAAB> Nov 8 14:13:37 fastmail dovecot: imap(a(a)a.com): Error: net_connect_unix(/var/run/dovecot/dict) failed: Permission denied (euid=5000(<unknown>) egid=5000(<unknown>) missing +r perm: /var/run/dovecot/dict, dir owned by 0:0 mode=0755) Question is, should I have the GID on the users set to 0, or is there another way to workaround it? Thanks,

1 0

Virtual alias with dovecot
by Jorge Bastos 08 Nov '14

08 Nov '14

Hi, I've setup virtual alias/users/domains with postfix and dovecot, so far so good. In the alias table I set the information of the source and destination address, but then I try to send an email to the alias, dovecot complains about it. What am I doing wrong? Nov 7 23:04:13 fastmail dovecot: lmtp(4687): Connect from local Nov 7 23:04:13 fastmail postfix/lmtp[6556]: 1D2AC100E0A: to=<b(a)a.com>, relay=fastmail.domain.pt[private/dovecot-lmtp], delay=6.3, delays=6.2/0/0/0.06, dsn=5.1.1, status=bounced (host fastmail.domain.pt[private/dovecot-lmtp] said: 550 5.1.1 <b(a)a.com> User doesn't exist: b(a)a.com (in reply to RCPT TO command)) Nov 7 23:04:13 fastmail dovecot: lmtp(4687): Disconnect from local: Successful quit Postfix alias conf: virtual_alias_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf cat mysql-virtual-alias-maps.cf user = posuser password = popass hosts = 127.0.0.1 dbname = postfix query = SELECT deliver_to FROM dovecot_aliases WHERE alias='%s' where the table structure is: CREATE TABLE `dovecot_aliases` ( `id` int(11) NOT NULL, `alias` varchar(255) NOT NULL, `deliver_to` varchar(255) NOT NULL, PRIMARY KEY (`id`) ) ENGINE=MyISAM DEFAULT CHARSET=utf8 ROW_FORMAT=DYNAMIC; Records are, considering that the main address is a(a)a.com: Insert into dovecot_alias values (1,'b(a)a.com','a(a)a.com'); Should be postfix that should had send this to the main address right? What could be wrong? SQL Logs for this, show's that dovecot considered the alias to check if the users exists instead of the real address: 141107 23:18:12 45 Connect postfix_usr@localhost on postfix 45 Query SELECT deliver_to FROM dovecot_aliases WHERE alias='ola.pt' 46 Connect postfix_usr@localhost on postfix 46 Query SELECT 1 FROM dovecot_domains WHERE domain='ola.pt' and status='true' 141107 23:18:16 45 Query SELECT deliver_to FROM dovecot_aliases WHERE alias='a.com' 46 Query SELECT 1 FROM dovecot_domains WHERE domain='a.com' and status='true' 47 Connect postfix_usr@localhost on postfix 47 Query SELECT deliver_to FROM dovecot_aliases WHERE alias='b(a)a.com' 141107 23:18:22 45 Query SELECT deliver_to FROM dovecot_aliases WHERE alias='a.com' 46 Query SELECT 1 FROM dovecot_domains WHERE domain='a.com' and status='true' 48 Connect postfix_usr(a)192.168.69.223 on postfix 48 Query select uid,gid from dovecot_users where username='b(a)a.com' 49 Connect postfix_usr@localhost on postfix 49 Query SELECT deliver_to FROM dovecot_aliases WHERE alias='ola(a)ola.pt' 49 Query SELECT deliver_to FROM dovecot_aliases WHERE alias='@ola.pt' 45 Query SELECT deliver_to FROM dovecot_aliases WHERE alias='ola.pt' 46 Query SELECT 1 FROM dovecot_domains WHERE domain='ola.pt' and status='true' PS: offtopic, don't understand why postfix queries the sender domain in the domains table and the sender email in the alias table. Thanks in advanced, Jorge,

1 0

mail location change results in various errors
by Cliff Hayes 07 Nov '14

07 Nov '14

I have a sendmail/dovecot imap/pop3 system that has been running with the following mail_location: mail_location = mbox:/var/empty:INBOX=/var/spool/mail/%u:INDEX=/var/indexes/%u In order to reduce errors and simplify operation I removed imap and am now only responding to pop3. I'd like to also simplify the mail_location to get rid of index errors since I don't need indexes: mail_location = mbox:/var/spool/mail:INBOX=/var/spool/mail/%n But when I applied the new mail_location I began to get the following five errors: Nov 6 23:17:24 sendmail dovecot: pop3(chayes): Warning: UIDVALIDITY changed (1132434125 -> 1205169149) in mbox file /var/spool/mail/chayes Nov 6 23:17:26 sendmail dovecot: pop3(chayes): Panic: Message unexpectedly expunged from index Nov 6 23:17:26 sendmail dovecot: pop3(chayes): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0() [0x3340045e2a] -> /usr/lib64/dovecot/libdovecot.so.0() [0x3340045e6e] -> /usr/lib64/dovecot/libdovecot.so.0(i_fatal+0) [0x3340019eb3] -> /usr/lib64/dovecot/libdovecot-storage.so.0() [0x3ef62567ed] -> /usr/lib64/dovecot/libdovecot-storage.so.0() [0x3ef6256e75] -> /usr/lib64/dovecot/libdovecot-storage.so.0() [0x3ef62928ed] -> /usr/lib64/dovecot/libdovecot-storage.so.0(index_mail_set_seq+0x76) [0x3ef6294ae6] -> /usr/lib64/dovecot/libdovecot-storage.so.0() [0x3ef625698c] -> dovecot/pop3() [0x405ec7] -> dovecot/pop3(client_command_execute+0x6d7) [0x4071c7] -> dovecot/pop3(client_handle_input+0x78) [0x405618] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x3340052c36] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run+0xa7) [0x3340053a57] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x3340052778] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_run+0x13) [0x334003e3c3] -> dovecot/pop3(main+0x283) [0x403cc3] -> /lib64/libc.so.6(__libc_start_main+0xf5) [0x359f821a05] -> dovecot/pop3() [0x403e2d] Nov 6 23:17:26 sendmail dovecot: pop3(chayes): Fatal: master: service(pop3): child 3358 killed with signal 6 (core dumps disabled) Nov 6 23:18:00 sendmail dovecot: pop3(jbkirk): Error: open(/var/spool/mail/.imap/INBOX/dovecot.index.log) failed: Permission denied (euid=2151(jbkirk) egid=12(mail) missing +r perm: /var/spool/mail/.imap/INBOX/dovecot.index.log, dir owned by 3575:12 mode=0770) dovecot -n output # 2.1.16: /etc/dovecot/dovecot.conf # OS: Linux 3.9.2-200.fc18.x86_64 x86_64 Fedora release 18 (Spherical Cow) ext4 auth_mechanisms = plain login auth_verbose = yes auth_verbose_passwords = plain disable_plaintext_auth = no mail_location = mbox:/var/empty:INBOX=/var/spool/mail/%u:INDEX=/var/indexes/%u mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } protocols = pop3 ssl = no ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } What do I need to do to transition to the new mail_location without the errors? Thanks in advance.

1 0

building latest stable for ubuntu 14.04
by Eduardo Casarero 07 Nov '14

07 Nov '14

Hi list, Does anybody have some notes/blog post/etc about building dovecot deb packages?

3 2

mail location change generates various errors
by Cliff Hayes 07 Nov '14

07 Nov '14

I have a sendmail/dovecot imap/pop3 system that has been running with the following mail_location: mail_location = mbox:/var/empty:INBOX=/var/spool/mail/%u:INDEX=/var/indexes/%u In order to reduce errors and simplify operation I removed imap and am now only responding to pop3. I'd like to also simplify the mail_location to get rid of index errors since I don't need indexes: mail_location = mbox:/var/spool/mail:INBOX=/var/spool/mail/%n But when I applied the new mail_location I began to get the following five errors: Nov 6 23:17:24 sendmail dovecot: pop3(chayes): Warning: UIDVALIDITY changed (1132434125 -> 1205169149) in mbox file /var/spool/mail/chayes Nov 6 23:17:26 sendmail dovecot: pop3(chayes): Panic: Message unexpectedly expunged from index Nov 6 23:17:26 sendmail dovecot: pop3(chayes): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0() [0x3340045e2a] -> /usr/lib64/dovecot/libdovecot.so.0() [0x3340045e6e] -> /usr/lib64/dovecot/libdovecot.so.0(i_fatal+0) [0x3340019eb3] -> /usr/lib64/dovecot/libdovecot-storage.so.0() [0x3ef62567ed] -> /usr/lib64/dovecot/libdovecot-storage.so.0() [0x3ef6256e75] -> /usr/lib64/dovecot/libdovecot-storage.so.0() [0x3ef62928ed] -> /usr/lib64/dovecot/libdovecot-storage.so.0(index_mail_set_seq+0x76) [0x3ef6294ae6] -> /usr/lib64/dovecot/libdovecot-storage.so.0() [0x3ef625698c] -> dovecot/pop3() [0x405ec7] -> dovecot/pop3(client_command_execute+0x6d7) [0x4071c7] -> dovecot/pop3(client_handle_input+0x78) [0x405618] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x3340052c36] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run+0xa7) [0x3340053a57] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x3340052778] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_run+0x13) [0x334003e3c3] -> dovecot/pop3(main+0x283) [0x403cc3] -> /lib64/libc.so.6(__libc_start_main+0xf5) [0x359f821a05] -> dovecot/pop3() [0x403e2d] Nov 6 23:17:26 sendmail dovecot: pop3(chayes): Fatal: master: service(pop3): child 3358 killed with signal 6 (core dumps disabled) Nov 6 23:18:00 sendmail dovecot: pop3(jbkirk): Error: open(/var/spool/mail/.imap/INBOX/dovecot.index.log) failed: Permission denied (euid=2151(jbkirk) egid=12(mail) missing +r perm: /var/spool/mail/.imap/INBOX/dovecot.index.log, dir owned by 3575:12 mode=0770) dovecot -n output # 2.1.16: /etc/dovecot/dovecot.conf # OS: Linux 3.9.2-200.fc18.x86_64 x86_64 Fedora release 18 (Spherical Cow) ext4 auth_mechanisms = plain login auth_verbose = yes auth_verbose_passwords = plain disable_plaintext_auth = no mail_location = mbox:/var/empty:INBOX=/var/spool/mail/%u:INDEX=/var/indexes/%u mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } protocols = pop3 ssl = no ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } What do I need to do to transition to the new mail_location without the errors? Thanks in advance.

2 1

Dovecot replication causing deleted emails to reappear
by Asai 06 Nov '14

06 Nov '14

Greetings, I've set up replication successfully on two Dovecot servers. I had fully synced the servers but then took one offline for 2 weeks. When I restored it, the servers synced but ended up replacing deleted emails in random people's inboxes. I'm using maildir. Does anyone have any insights as to correcting this issue? Asai -- --Asai

1 0

Dovecot-lda permission errors or maybe authentication errors?
by Robert Kryger 06 Nov '14

06 Nov '14

I am a new dovecot user who recently transitioned my old mailserver to a new CentOS/Postfix/Dovecot system. I am running a simple configuration with about a dozen system users and Maildir folders. The e-mail setup seems to be running fine when I use the default local-delivery-agent in Postfix. However, I am trying to use the dovecot-lda instead so I can take advantage of the sieve functionality. I have tried to specify the dovecot-lda in two ways. First, in the /etc/postfix/main.cf file: mailbox_command = /usr/libexec/dovecot/dovecot-lda -f "$SENDER" -a "$RECIPIENT" or alternatively, I leave the mailbox_command blank and specify the following in the .forward file of a test user: | "/usr/libexec/dovecot/dovecot-lda" Either approach gives me the same error(s). When a mail message is sent to the test user USER1, the following errors appear in the dovecot-lda error file: Nov 04 08:47:29 lda(user1): Error: chdir(/home/user1/) failed: Permission denied (euid=524(user1) egid=524(user1) stat() failed: No such file or directory, euid is not dir owner) Nov 04 08:47:29 lda(user1): Error: chdir(/home/user1) failed: Permission denied Nov 04 08:47:29 lda(user1): Error: user user1: Initialization failed: Namespace 'INBOX.': stat(/home/user1/Maildir) failed: Permission denied (euid=524(user1) egid=524(user1) stat() failed: No such file or directory, euid is not dir owner) Nov 04 08:47:29 lda(user1): Fatal: Invalid user settings. Refer to server log for more information. Nov 04 08:47:29 lda(user1): Error: chdir(/home/user1/) failed: Permission denied (euid=524(user1) egid=524(user1) stat() failed: No such file or directory, euid is not dir owner) Nov 04 08:47:29 lda(user1): Error: chdir(/home/user1) failed: Permission denied Nov 04 08:47:29 lda(user1): Error: user user1: Initialization failed: Namespace 'INBOX.': stat(/home/user1/Maildir) failed: Permission denied (euid=524(user1) egid=524(user1) stat() failed: No such file or directory, euid is not dir owner) Nov 04 08:47:29 lda(user1): Fatal: Invalid user settings. Refer to server log for more information. At first, I interpreted this to mean the file permissions were not set correctly on the home directory or the Maildir folder. However, I have opened these up to full rwx access for everyone and I still get the same errors. Alternatively, perhaps this is related somehow to the dovecot-lda authentication process via the password or user databases, but I can't make any sense of the documentation. Can anyone suggest what might be wrong or how to better diagnose? For reference, I am running dovecot version 2.0.9. The dovecot-lda process also outputs the following messages (not errors) when a test message is sent to the USER1 account: Nov 04 08:47:29 lda: Debug: Loading modules from directory: /usr/lib64/dovecot Nov 04 08:47:29 lda: Debug: Module loaded: /usr/lib64/dovecot/lib90_sieve_plugin.so Nov 04 08:47:29 lda(user1): Debug: Effective uid=524, gid=524, home=/home/user1 Nov 04 08:47:29 lda(user1): Debug: Namespace : type=private, prefix=INBOX., sep=., inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/Maildir Nov 04 08:47:29 lda(user1): Debug: maildir++: root=/home/user1/Maildir, index=, control=, inbox=/home/user1/Maildir Nov 04 08:47:29 lda: Debug: Loading modules from directory: /usr/lib64/dovecot Nov 04 08:47:29 lda: Debug: Module loaded: /usr/lib64/dovecot/lib90_sieve_plugin.so Nov 04 08:47:29 lda(user1): Debug: Effective uid=524, gid=524, home=/home/user1 Nov 04 08:47:29 lda(user1): Debug: Namespace : type=private, prefix=INBOX., sep=., inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/Maildir Nov 04 08:47:29 lda(user1): Debug: maildir++: root=/home/user1/Maildir, index=, control=, inbox=/home/user1/Maildir The output of dovecot -n is: # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-431.29.2.el6.x86_64 x86_64 CentOS release 6.5 (Final) auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login disable_plaintext_auth = no login_trusted_networks = 71.xx.xx.xx 71.xx.xx.xy 71.xx.xx.xz 71.xx.xx.yx mail_debug = yes mail_location = maildir:~/Maildir managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mbox_write_locks = fcntl namespace { inbox = yes location = prefix = INBOX. separator = . } passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = home/sieve sieve_max_script_size = 1M } protocols = imap lmtp sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } protocol lda { info_log_path = /var/log/dovecot-lda.log log_path = /var/log/dovecot-lda-errors.log mail_plugins = sieve postmaster_address = postmaster(a)xxxxxxx.com }

3 7

Re: Dovecot-lda permission errors or maybe authentication errors?
by Alexander Dalloz 06 Nov '14

06 Nov '14

Am 06.11.2014 um 09:01 schrieb Steffen Kaiser: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On Wed, 5 Nov 2014, Alexander Dalloz wrote: > > Dear Alexander, > >> Run "sestatus" and you'll see. >> >> Run "grep -i AVC /var/log/audit/audit.log" to identify SELinux caused >> denials. > > because I saw this type of question quite too often, I added this info > to the Wiki2 (to be revised by Timo): > http://master.wiki2.dovecot.org/WhyDoesItNotWork > > I copy'n'pasted your sentences, if you don't mind. > > Kind regards, > > - -- Steffen Kaiser Hello Steffen, sure I am fine with that. Even better it would be to have a recipe for a custom SELinux policy to not be mislead switching off SELinux at all. Such a custom policy is necessary when storing mail in the user's homedir because files created there get a wrong SELinux context for that usecase by default. An general overview about this topic can be found on http://wiki.centos.org/HowTos/SELinux Kind regards Alexander

1 0

Can I take mail from Maildir mailbox and deliver it as new?
by James Pryor 06 Nov '14

06 Nov '14

Hello list, I have a need for someone to point me in the right direction. Our old email system (system A) had an account that acted as a mailing list accumulator/archiver. This account was a member of every list and mail would be sent to it's address. The strange part is that email was not delivered to system A because there was a . (dot) forward alias to another machine (system B) that runs sendmail. System B's sendmail then slurped up the incoming mail and processed it in some fashion which I do not care about. On our new mail server (system C (OS is RHEL6.5, dovecot-2.0.9-7.el6_5.1.x86_64, postfix-2.6.6-6.el6_5.x86_64)), I performed a bulk Linux account and mailbox migration from system A to system C using postfix/dovecot/imapsync. But I forgot to put the alias in place on system C to send all incoming that special account's mail on system B. So mail started to get delivered to local user ar_list on system C. So now I have a Maildir format mailbox on system C that has mail in it and I want to be able to manipulate and/or re-send those emails as new mail to system B. Once it is received by sendmail on system B, then I don't care about it any more. Is there a way to take mail sitting on disk in a mailbox and deliver it as if it was new mail to some other machine? Thanks, James -bash-4.1$ ls -l total 566 drwx------ 2 ar_list users 2048 Aug 7 21:29 cur -rw------- 1 ar_list users 12556 Oct 8 17:09 dovecot.index -rw------- 1 ar_list users 378880 Oct 9 14:41 dovecot.index.cache -rw------- 1 ar_list users 2580 Oct 9 14:41 dovecot.index.log -rw------- 1 ar_list users 65549 Oct 9 14:41 dovecot-uidlist -rw------- 1 ar_list users 8 Aug 7 19:38 dovecot-uidvalidity -r--r--r-- 1 ar_list users 0 Aug 7 19:38 dovecot-uidvalidity.53e40ddc drwx------ 2 ar_list users 100352 Oct 9 14:41 new drwx------ 2 ar_list users 2048 Oct 9 14:41 tmp -bash-4.1$ ls new/ | wc -l 1020 -bash-4.1$ ls cur | wc -l 25

3 3

Re: Dovecot-lda permission errors or maybe authentication errors?
by Robert Kryger 06 Nov '14

06 Nov '14

Alexander, You are absolutely right - I apologize for my confusion regarding SElinux. In fact, when I turn off SElinux in /etc/selinux/config (setting SELINUX=disabled, instead of =enforcing) then dovecot-lda starts working. Thanks for the advice - I have been fighting with this for several weeks without making headway! Robert

1 0

gssapi considered as PLAIN?
by Harry Schmalzbauer 05 Nov '14

05 Nov '14

Hello, as soon as I set "disable_plaintext_auth = yes", AUTH=GSSAPI vanishes from capabilities. ([CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=GSSAPI AUTH=PLAIN AUTH=LOGIN] vs [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS LOGINDISABLED]) Why? I'm wondering especially because at http://wiki2.dovecot.org/Authentication/Mechanisms, GSSAPI is correctly listed under “Non-plaintext authentication“. Thanks, -Harry

3 7

ntlm_auth seems ok, initial auth failure with dovecot2 (and winbind 4.1.13)
by Harry Schmalzbauer 05 Nov '14

05 Nov '14

Hello, I've read quite often that there are problems with ntlm_auth helper (last one here http://www.dovecot.org/list/dovecot/2014-June/096561.html) But haven't found any confirmation, neither it's working for anybody else nor that it's known taht this issue needs debuging. Like for ohers, my authentication tests from the commandline with ntlm_auth exactly give expected results. But initial authentication (with Outlook) fail at first, but after entering the user's password, nevertheless succeeds with mech=NTLM. See the attached ntlm-log.txt Can't exactly tell when this regression occured, one year ago nobody had to enter his password, it worked like intended with Outlook (which still is version 2010). Any idea how to debug? It could be also a regression in samba, both highly appreciated applications were upgraded at the same time… Thanks, -Harry

1 0

doveadm index message-decoder assertion failed
by cs+dovecot＠ctzen.com 05 Nov '14

05 Nov '14

Hi, I've setup FTS using lucene and it should be working, the lucene index is updated when mail arrives. I also managed to reindex my INBOX: doveadm index -u foo -q INBOX However, when I try to index an Archives folder: doveadm index -u foo -q Archives, the index-work crashed with this log message: dovecot: indexer-worker(foo): Panic: file message-decoder.c: line 363 (message_decode_body): assertion failed: (ctx->translation_size <= sizeof(ctx->translation_buf)) dovecot: indexer: Error: Indexer worker disconnected, discarding 1 requests for foo dovecot: indexer-worker(foo): Fatal: master: service(indexer-worker): child 28730 killed with signal 6 (core dumps disabled) The Archives folder has 22317 messages. Please help. dovecot --version 2.2.15 dovecot -n # 2.2.15: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 10.0-STABLE i386 auth_username_format = %Ln first_valid_gid = 1000 first_valid_uid = 1000 login_trusted_networks = xxx.xxx.xxx.x/24 mail_location = maildir:~/Maildir mail_plugins = " fts fts_lucene" mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave duplicate namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } plugin { antispam_backend = spool2dir antispam_spam = Junk antispam_spool2dir_notspam = /var/spool/dovecot-antispam/queue/ham-%%020lu-%u-%%05lu antispam_spool2dir_spam = /var/spool/dovecot-antispam/queue/spam-%%020lu-%u-%%05lu antispam_trash = Trash fts = lucene fts_autoindex = yes fts_lucene = whitespace_chars=@. } protocols = imap lmtp sieve service imap-login { inet_listener imap { address = xxx.xxx.xxx.x } inet_listener imaps { address = xxx.xx.xx.xx } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve { address = xxx.xx.xx.xx xxx.xxx.xx.x port = 4190 } } ssl_cert = </var/ssl/crts/mail.crt ssl_key = </var/ssl/keys/ssl-npp.key userdb { driver = passwd } protocol lmtp { mail_plugins = " fts fts_lucene sieve" } protocol imap { mail_max_userip_connections = 20 mail_plugins = " fts fts_lucene antispam" }

2 2

calling post-login script with doveadm
by Héctor Moreno Blanco 05 Nov '14

05 Nov '14

Hello everyone, I'm trying to execute some commands with doveadm but I need some information loaded in a post-login script before running these commands. Is possible to run the post-login script while executing doveadm? I've found how to do something similar with -o key=value to override settings, but I want to change a namespace location, as done in the post-login script: ... export USERDB_KEYS="$USERDB_KEYS namespace/archivo/location" exec env "NAMESPACE/ARCHIVO/LOCATION=$location" "$@" ... Thank you very much in advanced. Kind regards. Héctor Moreno P Please consider the environment before printing this e-mail. ______________________ This message including any attachments may contain confidential information, according to our Information Security Management System, and intended solely for a specific individual to whom they are addressed. Any unauthorised copy, disclosure or distribution of this message is strictly forbidden. If you have received this transmission in error, please notify the sender immediately and delete it. ______________________ Este mensaje, y en su caso, cualquier fichero anexo al mismo, puede contener informacion clasificada por su emisor como confidencial en el marco de su Sistema de Gestion de Seguridad de la Informacion siendo para uso exclusivo del destinatario, quedando prohibida su divulgacion copia o distribucion a terceros sin la autorizacion expresa del remitente. Si Vd. ha recibido este mensaje erroneamente, se ruega lo notifique al remitente y proceda a su borrado. Gracias por su colaboracion. ______________________

1 1

Re: Example records for SQL AUTH
by James 05 Nov '14

05 Nov '14

On 03/11/2014 22:29, Jorge Bastos wrote: > Password_query: > > password_query = select username, domain,password from users where > username='%u' and domain='%d' and active='true' > Try "... username='%n' ..." not %u From doc/dovecot/example-config/dovecot-sql.conf # Commonly used available substitutions (see http://wiki.dovecot.org/Variables # for full list): # %u = entire user@domain # %n = user part of user@domain # %d = domain part of user@domain James.

1 0

Public mailbox confusion
by Stefan G. Weichinger 05 Nov '14

05 Nov '14

greets, I am quite sure I ask some faq here ... sorry, but I am confused by the many options and choices here. What I want to do is: I migrate lots of public folders from a MS Exchange Server ... The customer wants that there is a "Public" folder containing all these hundreds of folders, the public folder should be visible for all the dovecot-users and all the subfolders should be automatically subscribed as soon a new user logs in. What I have now: namespace { type = private separator = / prefix = inbox = yes } namespace { type = public separator = / prefix = Public/ location = maildir:/home/vmail/public:INDEXPVT=/home/vmail/public/index/%d/%u/index subscriptions = yes } As far as I see from testing this doesn't yet work that way. When I open the mailbox with eg. roundcube I see "Public" but nothing below it ... Could someone please give me a good pointer here? Thanks! Stefan

2 4

sieve replication and .dovecot.lda-dupes
by Jan Behrend 05 Nov '14

05 Nov '14

Hello list, I have a replicated dovecot with two servers. People seem to get vacation responses more often then it is specified in "days: XX", depending on which dovecot instance they receive the incoming mail. Is ".dovecot.lda-dupes" replicated? The other problem is that the vacation response is coming from the wrong address depending on which field the recipient was listed: "to:" or "cc:" Here is my test example: g9-rz has the vacation rule set up: date | mail -s test -r jbehrend(a)mpifr-bonn.mpg.de -c g9-rz(a)mpifr-bonn.mpg.de jan(a)flatpick.de and this returns this vacation response: ### snip ### Return-Path: <> Delivered-To: <jbehrend(a)mpifr-bonn.mpg.de> Received: from mail2.mpifr-bonn.mpg.de ([134.104.18.60]) by mailbox2.mpifr-bonn.mpg.de (Dovecot) with LMTP id +pgPDzm1WFSn9wAAvl5QjA for <jbehrend(a)mpifr-bonn.mpg.de>; Tue, 04 Nov 2014 12:16:13 +0100 X-Sieve: Pigeonhole Sieve 0.4.2 Message-ID: <dovecot-sieve-1415099773-541512-0(a)mailbox1.mpifr-bonn.mpg.de> Date: Tue, 04 Nov 2014 12:16:13 +0100 From: jan(a)flatpick.de To: <jbehrend(a)mpifr-bonn.mpg.de> Subject: Vacation In-Reply-To: <E1Xlc5t-0001LT-Bu(a)jb1.mpifr-bonn.mpg.de> References: <E1Xlc5t-0001LT-Bu(a)jb1.mpifr-bonn.mpg.de> Auto-Submitted: auto-replied (vacation) Precedence: bulk MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit X-Evolution-Source: 1385020682.6450.3@jb1 Ain't here! Go away or something ... Cheers ### snip ### I would expect "g9-rz(a)mpifr-bonn.mpg.de" in the from: field. Is this correct? Cheers Jan -- MAX-PLANCK-INSTITUT fuer Radioastronomie Jan Behrend - Rechenzentrum ---------------------------------------- Auf dem Huegel 69, D-53121 Bonn Tel: +49 (228) 525 359, Fax: +49 (228) 525 229 jbehrend(a)mpifr-bonn.mpg.de http://www.mpifr-bonn.mpg.de

2 1

error using fts/tika
by Infoomatic 04 Nov '14

04 Nov '14

Hi, I played around a bit and tried to get tika to run with dovecot. In the end I was at least a bit successful. However, when I tried to index my inbox with "doveadm index -A '*'" I get: doveadm(infoomatic): Error: fts_tika: PUT http://localhost:8081/tika failed: 500 Server Error doveadm(infoomatic): Warning: I/O leak: 0x7f4f697bb170 (line 127, fd 24) doveadm(infoomatic): Panic: file ioloop-iolist.c: line 22: unreached doveadm(infoomatic): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x67f30) [0x7f4f697e8f30] -> /usr/lib/dovecot/libdovecot.so.0(default_fatal_handler+0x2a) [0x7f4f697e8f9a] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f4f6979c515] -> /usr/lib/dovecot/libdovecot.so.0(+0x79b0d) [0x7f4f697fab0d] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handle_add+0x3b) [0x7f4f697fb2ab] -> /usr/lib/dovecot/libdovecot.so.0(+0x78cf1) [0x7f4f697f9cf1] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_move_io+0x3e) [0x7f4f697fa93e] -> /usr/lib/dovecot/libdovecot.so.0(connection_switch_ioloop+0x14) [0x7f4f697e6df4] -> /usr/lib/dovecot/libdovecot.so.0(http_client_switch_ioloop+0x28) [0x7f4f697bf8e8] -> /usr/lib/dovecot/libdovecot.so.0(+0x36a86) [0x7f4f697b7a86] -> /usr/lib/dovecot/modules/lib21_fts_solr_plugin.so(solr_connection_post_more+0x29) [0x7f4f68d9f069] -> /usr/lib/dovecot/modules/lib21_fts_solr_plugin.so(+0x3547) [0x7f4f68d9b547] -> /usr/lib/dovecot/modules/lib20_fts_plugin.so(fts_build_mail+0x35c) [0x7f4f68faaffc] -> /usr/lib/dovecot/modules/lib20_fts_plugin.so(+0xd3ee) [0x7f4f68fb03ee] -> /usr/lib/dovecot/libdovecot-storage.so.0(mail_precache+0x19) [0x7f4f69ac3c39] -> doveadm() [0x419501] -> doveadm() [0x4153c3] -> doveadm(doveadm_mail_try_run+0x48c) [0x4162ac] -> doveadm(main+0x3d8) [0x412588] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5) [0x7f4f693dcec5] -> doveadm() [0x4127a4] Aborted (core dumped) The last messages of the tika-server: Nov 04, 2014 10:18:17 PM org.apache.tika.server.TikaResource logRequest INFO: tika (video/x-ms-wmv) Nov 04, 2014 10:18:17 PM org.apache.tika.server.TikaResource$3 write WARNING: tika: Text extraction failed org.apache.tika.exception.TikaException: Unexpected RuntimeException from org.apache.tika.server.TikaResource$1@44742f73 Nov 04, 2014 10:18:17 PM org.apache.cxf.jaxrs.utils.JAXRSUtils logMessageHandlerProblem SEVERE: Problem with writing the data, class org.apache.tika.server.TikaResource$3, ContentType: text/plain Nov 04, 2014 10:18:17 PM org.apache.cxf.jaxrs.impl.WebApplicationExceptionMapper toResponse WARNING: javax.ws.rs.WebApplicationException: HTTP 415 Unsupported Media Type dovecot -n: # 2.2.15: /etc/dovecot/dovecot.conf # OS: Linux 3.13.0-39-generic x86_64 Ubuntu 14.04.1 LTS ext4 auth_username_format = %n disable_plaintext_auth = no mail_gid = vmail mail_home = /var/lib/vmail/home/%u mail_location = mdbox:/var/lib/vmail/mail/%u mail_plugins = fts fts_solr mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave duplicate imapflags mdbox_rotate_size = 32 M namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { fts = solr fts_autoindex = yes fts_solr = url=http://localhost:8080/solr/ break-imap-search fts_tika = http://localhost:8081/tika sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_extensions = +imapflags } protocols = " imap sieve" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail user = vmail } } service managesieve-login { inet_listener sieve_deprecated { port = 2000 } } ssl_cert = </etc/dovecot/dovecot.pem ssl_key = </etc/dovecot/private/dovecot.pem userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lda { mail_plugins = fts fts_solr sieve } Has anyone hints? Or do the devs want some more information for debugging? best regards, infoomatic

1 0

Re: authentication issues with ipad / mac email client
by Rajesh M. 04 Nov '14

04 Nov '14

hi i am using dovecot version2.2.7 provided by qmailtoaster - 64 bit on centos 6.5 64 bit system - 16 gb ram with a hex core processor. i was using qmail pop3 on a 32 bit system for the past over 7 years and had absolutely no issues. with dovecot pop3 i have started receiving a variety of problems mac machines and ipads -- port 110 does not work at all. i have to use port 995 only. i have allowed plain text auth. thunderbird works perfectly -- both imap and pop3 with port 110 and port 995 outlook 2010 also works but incase of one customer the mail download is very slow. i have a windows servers with mailenable mail server and the same customer could download perfectly from those windows servers. i am using the default "service pop3" settings Do i need to increase the memory settings / for pop3 login similar to imap login which i am missing out like what is configured for imap. (pl see config file below) My mail server is busy with around 4000 mailboxes and transacting over 200k emails per day. atleast around 250 simultaneous pop3 connections during peak hours. # dovecot -a | grep pop3_uidl_format pop3_uidl_format = %08Xu%08Xv [root@ns1 spamassassin]# dovecot -n # 2.2.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-431.29.2.el6.x86_64 x86_64 CentOS release 6.5 (Final) auth_cache_negative_ttl = 0 auth_cache_size = 32 M auth_cache_ttl = 30 mins auth_mechanisms = plain login digest-md5 cram-md5 default_login_user = vpopmail disable_plaintext_auth = no first_valid_gid = 89 first_valid_uid = 89 log_path = /var/log/dovecot.log login_greeting = ready. mail_max_userip_connections = 50 mail_plugins = " quota" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { inbox = yes location = prefix = separator = . type = private } passdb { args = cache_key=%u webmail=127.0.0.1 driver = vpopmail } plugin { quota = maildir:ignore=Trash quota_rule = ?:storage=0 } protocols = imap pop3 service imap-login { client_limit = 256 process_limit = 400 process_min_avail = 4 service_count = 0 vsz_limit = 384 M } ssl_cert = </var/qmail/control/servercert.pem ssl_dh_parameters_length = 2048 ssl_key = </var/qmail/control/servercert.pem userdb { args = cache_key=%u quota_template=quota_rule=*:backend=%q driver = vpopmail } protocol imap { imap_client_workarounds = delay-newmail mail_plugins = " quota imap_quota" } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_fast_size_lookups = yes pop3_lock_session = no pop3_no_flag_updates = yes } i am really puzzled because dovecot was highly recommended by all. thanks for all your help rajesh ----- Original Message ----- From: Daniel Parthey [mailto:pada@posteo.de] To: 24x7server@24x7server.net,dovecot@dovecot.org Sent: Sat, 01 Nov 2014 09:34:53 +0100 Subject: Re: authentication issues with ipad / mac email client Hi, please post * output of "doveconf -n" * error log messages from dovecot for failed vs. succeeded login Regards Daniel

1 0

Re: Example records for SQL AUTH
by deoren 04 Nov '14

04 Nov '14

On 11/3/2014 4:29 PM, Jorge Bastos wrote: > Hi, > > > > Where can I get examples for the records for the "users" table? If I understand your question properly and you're looking for examples of creating new virtual users, then this guide covers that: https://www.linode.com/docs/email/email-with-postfix-dovecot-and-mysql You would have to adjust to fit your chosen schema of course as theirs is a much simpler setup that excludes the uid, gid, and home values. > > For SHA512-CRYPT, I tried: > > > > replace into users values ('a(a)a.com','a.com',ENCRYPT('b', CONCAT('$6$', > SUBSTRING(SHA(RAND()), -16))),'',0,0,'true'); > > > > schema is: > > CREATE TABLE `users` ( > > `username` varchar(255) NOT NULL, > > `domain` varchar(255) NOT NULL, > > `password` varchar(255) NOT NULL, > > `home` varchar(255) NOT NULL, > > `uid` int(11) NOT NULL, > > `gid` int(11) NOT NULL, > > `active` enum('true','false') NOT NULL DEFAULT 'true', > > PRIMARY KEY (`username`) > > ) ENGINE=InnoDB DEFAULT CHARSET=utf8 > > > > Password_query: > > password_query = select username, domain,password from users where > username='%u' and domain='%d' and active='true' What does your auth-sql-conf.ext file look like? With as much information as you already have in your database schema you may want to look at using the Prefetch userdb. http://wiki2.dovecot.org/UserDatabase/Prefetch P.S. Apologies for the duplication. I forgot to reply to the list with my last response.

1 0

SSL Client authentication with trustcenter-certificate
by dovecot.pkoch＠dfgh.net 04 Nov '14

04 Nov '14

Dear reader, we are using dovecot 2.2.7 and like it very much. Authentication is done via a checkpassword program that does two things: 1) check wether the client has connected via SSL using a client certificate 2) check wether the client is using a one time password generator Most of our users are using certificates that we have created ourself. These certificates contain a x500uniqueidentifier. But some users are using certificates from a german trust center and these certificates do not contain a x500uniqueIdentifier nor something similar. I would like to map these certificates to user accounts and my first idea was to do so from my checkpassword programm. But how do I find out the client-certificate from within a checkpassword script. I tried to add an additional entry to auth_request_var_expand_static_tab and fill in that environment variable in auth_request_get_var_expand_table_full() (both in src/auth/auth-request.c). But where do I find the SSL-context from which I can extract the client certificate? Kind regards Peter Koch

1 0

Example records for SQL AUTH
by Jorge Bastos 04 Nov '14

04 Nov '14

Hi, Where can I get examples for the records for the "users" table? For SHA512-CRYPT, I tried: replace into users values ('a(a)a.com','a.com',ENCRYPT('b', CONCAT('$6$', SUBSTRING(SHA(RAND()), -16))),'',0,0,'true'); schema is: CREATE TABLE `users` ( `username` varchar(255) NOT NULL, `domain` varchar(255) NOT NULL, `password` varchar(255) NOT NULL, `home` varchar(255) NOT NULL, `uid` int(11) NOT NULL, `gid` int(11) NOT NULL, `active` enum('true','false') NOT NULL DEFAULT 'true', PRIMARY KEY (`username`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 Password_query: password_query = select username, domain,password from users where username='%u' and domain='%d' and active='true' What could I be missing? but logs says user is not found in userdb: Nov 3 22:17:24 fastmail dovecot: auth: Error: sql(a(a)a.com,127.0.0.1,<JIsTtvsGZwB/AAAB>): user not found from userdb Nov 3 22:17:24 fastmail dovecot: pop3: Error: Authenticated user not found from userdb, auth lookup id=3938844673 (client-pid=10240 client-id=1) Nov 3 22:17:24 fastmail dovecot: pop3-login: Internal login failure (pid=10240 id=1) (internal failure, 1 successful auths): user=<a(a)a.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=10247, secured, session=<JIsTtvsGZwB/AAAB>

1 0

Postlogin script in v1
by List 03 Nov '14

03 Nov '14

Does dovecot-1.0.7-7.el5 support postlogin scripting?

2 1

Released Pigeonhole v0.4.6 for Dovecot v2.2.15.
by Stephan Bosch 02 Nov '14

02 Nov '14

Hello Dovecot users, Version 0.4.5 introduced one new 'feature', but it caused build problems. This release fixes that. If you've successfully installed 0.4.5, you do not need to upgrade. Changelog v0.4.6: - After make distclean, the distributed tarball would fail to recompile. This causes problems for some distribution builds. The release is available as follows: http://pigeonhole.dovecot.org/releases/2.2/dovecot-2.2-pigeonhole-0.4.6.tar… http://pigeonhole.dovecot.org/releases/2.2/dovecot-2.2-pigeonhole-0.4.6.tar… Refer to http://pigeonhole.dovecot.org and the Dovecot v2.x wiki for more information. Have fun testing this new release and don't hesitate to notify me when there are any problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

1 0

Released Pigeonhole v0.4.5 for Dovecot v2.2.15.
by Stephan Bosch 02 Nov '14

02 Nov '14

Hello Dovecot users, Unfortunately, Pigeonhole v0.4.4 had a rather big issue with error handling and the execution of the implicit keep. This problem presented itself for example when users exceeded their quota. This did not result in the proper rejection message. This is why I quickly release a new version. Changelog v0.4.5: + Added a Pigeonhole version banner to doveconf output. This way, future bug reports will also include Pigeonhole version information. - Fixed handling of implicit keep. Last version erroneously reported that implicit keep succeeded after an earlier failure, while it in fact had failed. Particularly occurred for mailbox quota errors. - Fixed segfault occurring on SunOS systems when there is no active script. The release is available as follows: http://pigeonhole.dovecot.org/releases/2.2/dovecot-2.2-pigeonhole-0.4.5.tar… http://pigeonhole.dovecot.org/releases/2.2/dovecot-2.2-pigeonhole-0.4.5.tar… Refer to http://pigeonhole.dovecot.org and the Dovecot v2.x wiki for more information. Have fun testing this new release and don't hesitate to notify me when there are any problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

4 4

Sa-learn-pipe.sh script modification
by Pierre Barre 01 Nov '14

01 Nov '14

Hello, I've seen on this wiki page: http://wiki2.dovecot.org/Plugins/Antispam A script called "sa-learn-pipe.sh". I've tested it but it slow things down because dovecot wait for the script termination. So, I've made a modification. Now, the task is running in the background and dovecot move the mail without waiting for the script termination: #!/bin/bash echo /usr/bin/sa-learn $* /tmp/sendmail-msg-$$.txt echo "$$-start ($*)" >> /tmp/sa-learn-pipe.log #echo $* > /tmp/sendmail-parms.txt cat<&0 >> /tmp/sendmail-msg-$$.txt /usr/bin/sa-learn $* /tmp/sendmail-msg-$$.txt && rm -f /tmp/sendmail-msg-$$.txt & echo "$$-end" >> /tmp/sa-learn-pipe.log exit 0 I want know if this can cause any problem ? Thanks. -- Best regards, Pierre Barre.

1 0

Corrupted SSL parameters file in state_dir with HG 267bca7a62fb
by Thomas Leuxner 01 Nov '14

01 Nov '14

Hi, with the latest HG 267bca7a62fb the following error started to appear in the logs: Oct 31 09:39:07 nihlus dovecot: master: Dovecot v2.2.15 (267bca7a62fb) starting up for imap, lmtp [...] Oct 31 10:10:52 nihlus dovecot: lmtp(20876): Error: Corrupted SSL parameters file in state_dir: ssl-parameters.dat - disabling SSL 360 Oct 31 10:10:52 nihlus dovecot: lmtp(20876): Error: Couldn't initialize SSL parameters, disabling SSL Oct 31 10:10:52 nihlus dovecot: lmtp(20876): Connect from local This most likely has been introduced with a commit after the previous build installed (aa5dde56424f). I did not find options to disable SSL for LMTP either, as in my setup I'm using a UNIX socket. Regards Thomas

4 4

authentication issues with ipad / mac email client
by Rajesh M. 01 Nov '14

01 Nov '14

hi we are using using qmail toaster with dovecot pop3 and imap client outlook and thunderbird works fine in case of several ipad / mac email clients imap works fine but pop3 logins are not working with 110 port my dovecot config file is given below could somebody help please # Settings for 'stock' qmail-toaster disable_plaintext_auth = no default_login_user = vpopmail mail_max_userip_connections = 50 service imap-login { service_count = 0 client_limit = 256 process_min_avail = 4 vsz_limit = 384M process_limit = 400 } auth_cache_size = 32M auth_cache_ttl = 1800 auth_cache_negative_ttl = 0 auth_mechanisms = plain login digest-md5 cram-md5 auth_username_format = %Lu first_valid_uid = 89 first_valid_gid = 89 log_path = /var/log/dovecot.log login_greeting = ready. mail_plugins = $mail_plugins quota plugin/quota = maildir protocols = imap pop3 ssl_cert = </var/qmail/control/servercert.pem ssl_key = </var/qmail/control/servercert.pem # the following will likely be the default at some point ssl_dh_parameters_length = 2048 namespace { inbox = yes location = prefix = # prefix = INBOX. # Use 'prefix = INBOX.' for Courier-IMAP compatible transparent migration. # This forces all client apps to create subfolders underneath/within # the inbox instead of adjacent to it. It's not necessary to be that way. # FWIW, shubes thinks this setting is annoying/rediculous/retarded. # As a practical example, having no prefix allows mobile users to select # which folders get synchronized. Otherwise their whole mailbox is # synchronized, and they have no way to choose which folders they want sync'd. separator = . type = private } passdb { args = cache_key=%u webmail=127.0.0.1 driver = vpopmail } protocol imap { imap_client_workarounds = "delay-newmail" mail_plugins = $mail_plugins imap_quota } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_fast_size_lookups = yes pop3_lock_session = no # pop3_uidl_format = UID%u-%v pop3_no_flag_updates=yes } userdb { args = cache_key=%u quota_template=quota_rule=*:backend=%q driver = vpopmail } plugin { quota = maildir:ignore=Trash quota_rule = ?:storage=0 } thank you very much, rajesh

3 2

SSLv3 attack on pop3?
by Hans Morten Kind 31 Oct '14

31 Oct '14

We turned off SSLv3 support on our pop/imap running dovecot on Oct 16th, we did check that all users where using TLSv1 and there have been no complaints (except one old windows-phone). But at 13:00 UTC today, suddenly strange entries is seen in the logfile: Error: SSL: Stacked error: error:140943F2:SSL routines:SSL3_READ_BYTES:sslv3 alert unexpected message: SSL alert number 10 Followed by: pop3-login: Disconnected (no auth attempts in 2 secs) user=<>, rip= Some 20 ips have been seen so far, all ips are uniq and none have used our server lately. Just one resoved and it's name ends .cn, some lookups with whois leads to the same origin for all. This makes me anxious that some have made some poodle-like thing for pop3? hmk

2 2

vpopmail, open_smtp_relay and non-PLAIN auth mechs
by Jim Jagielski 31 Oct '14

31 Oct '14

I've noticed that if using the vpopmail auth setup, that the roaming-user functionality provided via open_smtp_relay() is only done if the auth mechanism is PLAIN. For example, if the client authenticates via DIGEST-MD5, the open relay file is not updated, as it should be. This is due to the call to open_smtp_relay only being done via vpopmail_verify_plain(). Instead, imo, that call should be done in auth_request_success() in the auth-request.c file, so that it is done however the authentication is done, as long as it is successful. Attached is a patch for 2.2.15. Let me know if attachments are not the preferred method and I'll cut/paste. tia! -- Jim Jagielski

2 2

Can someone explain this Sent thread sorting?
by Philip Rhoades 31 Oct '14

31 Oct '14

People, I attach a screen capture of my RoundCubeMail Sent box - why does the second item on the list, which is a separate reply to the thread above it, get sorted to position 2? By the date, and being a single mail, it should be much further down the screen . . I presume it is because the Subject is the same? Thanks, Phil. -- Philip Rhoades GPO Box 3411 Sydney NSW 2001 Australia E-mail: phil(a)pricom.com.au

2 1

Question wrt. dovecot replicator
by Remko Lodder 30 Oct '14

30 Oct '14

Hi People, I recently setup a replication service within dovecot between two machines in different datacenters, which has the following configuration; (yes it is hashed out, because I needed to) #service replicator { # unix_listener replicator-doveadm { # mode = 0666 # } # process_min_avail = 1 #} # #service aggregator { # fifo_listener replication-notify-fifo { # mode = 0666 # #user = vmail # } # unix_listener replication-notify { # mode = 0666 # #user = vmail # } #} # #service doveadm { # inet_listener { # port = 12346 # } #} # ##doveadm_port = 12346 #doveadm_password = XXXXXXX #replication_max_conns = 30 # and a mail_replica = tcp:host{a,b}:12346 configuration on each host so that they are pointing to eachother; This seems to work fine for most accounts, for example: I never experienced issues with this. However, several other accounts (with a large variety of clients) got duplicated emails. Looking with doveadm I only noticed that the numbers of the messages are closely related to eachother but one number incremented. So they cannot be deleted with the deduplicator function. The replication is provided over TCP only, the connection streams over an OpenVPN tunnel so that the contents are protected, the machines are located in different Datacenters but close to eachother. How can I determine why there are duplicated emails? What kind of messages should I specifically look for? Can I set this up for a few selected accounts instead of all accounts like it was currently? To make sure I do not make things worse for others then needs to be :-) The service had been disabled for the time being to prevent the other users from getting duplicated emails. Thanks for the advice in advance! Cheers Remko -- /"\ Best regards, | remko(a)FreeBSD.org \ / Remko Lodder | remko@EFnet X http://www.evilcoder.org/ | / \ ASCII Ribbon Campaign | Against HTML Mail and News

3 6

different mail location in different namespace
by Héctor Moreno Blanco 30 Oct '14

30 Oct '14

Hello everyone, We have Dovecot 2.1.6. With different Namespaces: ... mail_location = maildir:%h/Maildir ... namespace { separator = . prefix = inbox = yes type = private } namespace { inbox = no location = prefix = INBOX. separator = . hidden = yes type = private list = no } namespace { location = maildir:/buzon/archivo/%u/_ARCHIVO prefix = _ARCHIVO. hidden = yes separator = . type = private } We take the attribute "home directory" from the LDAP in the userdb attributes. We would like to modify this attribute for the Namespace ARCHIVO. For example, if a home directory is /buzon/buzon1/11111111, the mail location for ARCHIVO would be /buzon/archivo1/11111111. Is this modification possible without adding another attribute at the LDAP (just editing the attribute)? Thank you very much in advanced. Kind regards. Héctor Moreno. P Please consider the environment before printing this e-mail. ______________________ This message including any attachments may contain confidential information, according to our Information Security Management System, and intended solely for a specific individual to whom they are addressed. Any unauthorised copy, disclosure or distribution of this message is strictly forbidden. If you have received this transmission in error, please notify the sender immediately and delete it. ______________________ Este mensaje, y en su caso, cualquier fichero anexo al mismo, puede contener informacion clasificada por su emisor como confidencial en el marco de su Sistema de Gestion de Seguridad de la Informacion siendo para uso exclusivo del destinatario, quedando prohibida su divulgacion copia o distribucion a terceros sin la autorizacion expresa del remitente. Si Vd. ha recibido este mensaje erroneamente, se ruega lo notifique al remitente y proceda a su borrado. Gracias por su colaboracion. ______________________

2 4

Bug in the combination of Lazy_expunge and acl plugin
by Philipp Faeustlin 30 Oct '14

30 Oct '14

Hello Timo, Hello Dovecot Developers, Hello everyone on the list, I think I have some bug, because I haven't found a working configuration till now. I use latest dovecot 2.2.13 from the dovecot-ee repository, with acl and the lazy_expunge plugin. My configuration for shared folders work fine with lazy_expunge disabled. If I enable lazy_expunge and the user (named userA), which I'm testing with, got no shared folders, then lazy_expunge is working as supposed. Now I add some shared folder for example per doveadm: doveadm acl set -u userB(a)domain.de INBOX user=userA(a)domain.de lookup read write write-seen write-deleted insert expunge create After that every list command fails with: Fatal: lazy_expunge: Unknown namespace: '.EXPUNGED/' '.EXPUNGED/' is the name for the namespace of lazy_expunge. Easiest way for me to reproduce the error is: doveadm mailbox list -u userA(a)domain.de which results in: ----------------- Trash Drafts Sent doveadm(userA(a)domian.de): Fatal: lazy_expunge: Unknown namespace: '.EXPUNGED/' ------------------ I hope someone can confirm this behavior and or give me some hints to get rid of it. Regards Philipp Fäustlin

1 0

Bug in fts (solr?, Maildir?) incorrect last_indexed_uid
by Karl O. Pinc 30 Oct '14

30 Oct '14

Hi, I thought I should document this. (Dovecot 2.2.9, see config at bottom.) I installed dovecot and then converted a number of mbox mailboxes to Maildir, and had a number of pre-existing Maildir mailboxes. I then installed the debian (wheezy) fts-solar and jetty packages, and tested my inbox using the "telnet localhost imap ... 3 SEARCH text "test" method as described on the dovecot wiki. Everything seemed to work. But when I used balsa to search a mailbox other than my inbox, I got no results. "doveadm dump" on the searched mailbox showed that "last_indexed_uid" to be the last uid of my inbox. Stopping dovecot, deleting out the dovecot-index* files, starting dovecot, and re-running "doveadm dump" showed a non-existant last_indexed_uid -- that is, last_indexed_uid did not show up in the dump output. Using the telnet method above to attempt to search again yielded no results, but this time (I think, I also tried various times with balsa) the last_indexed_uid value was that of the last uid in my trash mailbox. I don't believe I'd yet tried fts on my trash. Using balsa as an imap client the results were very consistent; every Maildir where "doveadm dump" returned no last_indexed_uid value had the last_indexed_uid set to that of the inbox's largest uid. Running "doveadm fts rescan -u foo" fixed the problem. (FWIW, now all the Maildirs seem to have a last_indexed_uid=0.) Regards, Karl <kop(a)meme.com> Free Software: "You don't pay back, you pay forward." -- Robert A. Heinlein # 2.2.9: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-486 i686 Debian 7.7 default_vsz_limit = 1 G disable_plaintext_auth = no mail_location = maildir:~/Maildir:INBOX=~/Maildir/.inbox mail_plugins = fts fts_solr namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / } namespace unconverted { hidden = no list = yes location = mbox:~/mail prefix = unconverted/ separator = / subscriptions = yes type = private } passdb { driver = pam } plugin { fts = solr fts_autoindex = yes fts_solr = url=http://localhost:8983/solr/ } protocols = " imap" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } ssl = required ssl_cert = </etc/dovecot/dovecot.pem ssl_key = </etc/dovecot/private/dovecot.pem ssl_protocols = !SSLv2 !SSLv3 userdb { driver = passwd }

1 1

Quota reporting
by Hanns Mattes 30 Oct '14

30 Oct '14

Hi, my main server will be upgraded from Dovecot 1.2something to 2.2. For testing I've installed a setup with postfix, handing malis as a relay via lmtp. So far it's up and running - really nice. AFAICS there's one issue left: Thunderbird and Kmail don't show the quota status. Using doveadm quota the information is shown correctly, even the user-specific values (coming from openldap) are set correctly. I think, I miss something obvious ... (and besides quota - any configuration hint is very welcome) linux:/etc/dovecot # doveconf -n # 2.2.15: /etc/dovecot/dovecot.conf # OS: Linux 3.7.10-1.40-desktop x86_64 openSUSE 12.3 (x86_64) auth_master_user_separator = * auth_mechanisms = plain login digest-md5 cram-md5 apop auth_verbose = yes mail_debug = yes mail_location = maildir:~/Maildir mail_plugins = " quota zlib fts fts_lucene trash" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave duplicate namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = } passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes pass = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { fts_autoindex = yes fts_lucene = whitespace_chars=@. quota = maildir:User quota quota_exceeded_message = Storage quota for this account has been exceeded, please try again later. quota_grace = 100M quota_rule = *:storage=1000M quota_rule2 = Trash:storage=+10%% quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u quota_warning3 = storage=75%% quota-warning 75 %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_max_redirects = 32 trash = /etc/dovecot/dovecot-trash.conf.ext zlib_save = gz zlib_save_level = 6 } postmaster_address = admin(a)93er.net protocols = imap pop3 lmtp sieve service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service lmtp { inet_listener lmtp { address = 127.0.0.1 port = 24 } user = vmail } service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieve_deprecated { port = 2000 } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh user = vmail } ssl_cert = </etc/dovecot/brueckokomplett2014.crt ssl_key = </etc/dovecot/brueckofrei2014.key userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes protocol lmtp { mail_plugins = " quota zlib fts fts_lucene trash quota sieve" } protocol lda { mail_plugins = " quota zlib fts fts_lucene trash" } protocol imap { mail_plugins = " quota zlib fts fts_lucene trash quota imap_quota imap_zlib" } here is dovecot-ldap.conf.ext: hosts = 127.0.0.1 192.168.0.1 dn = cn=Manager,dc=dies,dc=jenes dnpass = ganzgeheim auth_bind = no base = ou=virtualmail,dc=dies,dc=jenes scope = subtree user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid,quota=quota_rule=*:\ storage=%$M user_filter = (&(objectClass=CourierMailAccount)(uid=%u)) pass_attrs = uid=user,userPassword=password,homeDirectory=userdb_home,uidNumber\ =userdb_uid,gidNumber=userdb_gid,quota=userdb_quota_rule=*:storage=%M pass_filter = (&(disableimap=FALSE)(objectClass=CourierMailAccount)(uid=%u)) iterate_attrs = uid=user iterate_filter = (objectClass=CourierMailAccount) default_pass_scheme = PLAIN Any ideas? Thanks in advance regards Hanns

2 4

Renaming not supported across conflicting directory - why?
by Arkadiusz Miśkiewicz 30 Oct '14

30 Oct '14

I wonder what is point of checkign file/dir create mode like this? Here it makes problems since some folders have different permissions than others but both are accessible/writable by user. So renaming is possible (as renaming according to unix permissions). Yet dovecot artificially prevents this. /* if we're renaming under another mailbox, require its permissions to be same as ours. */ if (strchr(newname, mailbox_list_get_hierarchy_sep(newlist)) != NULL) { struct mailbox_permissions old_perm, new_perm; mailbox_list_get_permissions(oldlist, oldname, &old_perm); mailbox_list_get_permissions(newlist, newname, &new_perm); if ((new_perm.file_create_mode != old_perm.file_create_mode || new_perm.dir_create_mode != old_perm.dir_create_mode || new_perm.file_create_gid != old_perm.file_create_gid)) { mailbox_list_set_error(oldlist, MAIL_ERROR_NOTPOSSIBLE, "Renaming not supported across conflicting " "directory permissions"); return -1; } } -- Arkadiusz Miśkiewicz, arekm / ( maven.pl | pld-linux.org )

1 0

Sieve plus addressed mail filtering
by Peter Chiochetti 30 Oct '14

30 Oct '14

Today I learned, that to filter incoming plus addressed mail (user+tag@…) I had to deviate from the documentation. There it reads: if envelope :detail "to" "spam"{ fileinto "Spam"; } Instead I had to write: if address :is :detail "To" "tag"{ fileinto "Tagged"; } Dovecot version is 2.2.13-1+bigmichi1~precise+1 -- peter

2 3

Released Pigeonhole v0.4.4 for Dovecot v2.2.15.
by Stephan Bosch 30 Oct '14

30 Oct '14

Hello Dovecot users, It's been about 5 months since the last Pigeonhole release, so it is high time for a new one. However, the main reason to make a release now is the fact that Dovecot v2.2.15 has one change that causes problems with the previous release of Pigeonhole. Unlike recent earlier releases, this release has a few big new features. Most notably, I implemented a generic Sieve script storage framework. This means that it is now relatively easy to implement a storage driver to retrieve Sieve scripts from a location other than the file system. An important effect of this new implementation is that these alternative storage locations can also be used with sieve_before/sieve_after. Also, storing Sieve scripts there using ManageSieve is also possible, provided that the driver provides an implementation. I used the new framework to implement an LDAP storage driver. However, it is read-only, which means that it doesn't currently provide ManageSieve support. Several bugs were fixed. The most nasty ones were related to the doveadm-sieve plugin (which is one of the reasons why this release took so long). The new script storage driver framework entailed large changes in this plugin, so many of these problems were addressed implicitly. Hopefully, all problems are solved now. Changelog v0.4.4: * Added support for Japanese mail addresses with dots at non-standard places in localpart. * Changed handling of ENOSPACE into a normal temporary failure and added handling of ENOQUOTA as a user error. * Restructured result execution, so that all actions which involve mail storage are always committed before all others. + Implemented support for generic Sieve storages. Using alternative storages now also possible for sieve_before/sieve_after. + Implemented storage driver for retrieving Sieve scripts from LDAP. This currently cannot be used with ManageSieve. + Implemented sieve_redirect_envelope_from setting, which allows configuring the envelope sender of redirected messages. - Fixed handling of mail storage errors occurring while evaluating the input message. - managesieve-login: - Removed bogus ALERT response code returned for AUTHENTICATE command. - Fixed handling of invalid initial response argument to AUTHENTICATE command. - Fixed handling of stream errors in lexical scanner. - Fixed handling of SMTP errors. Permanent and temporary errors were mixed up. - Fixed several problems reported by CLang 3.4. - duplicate extension: Fixed erroneous compile error about conflicting tags when `:handle' argument was used last. - relational extension: Fixed error handling of `:value' match. - editheader extension: Fixed header unfolding and header iteration. - mailbox extension: Fixed the `:create' tag, which erroneously subscribed an existing folder. - extprograms plugin: Fixed handling of error codes. - doveadm-sieve plugin: Fixed several bugs. Synchronization of symbolic link in the file storage should now also work properly. The release is available as follows: http://pigeonhole.dovecot.org/releases/2.2/dovecot-2.2-pigeonhole-0.4.4.tar… http://pigeonhole.dovecot.org/releases/2.2/dovecot-2.2-pigeonhole-0.4.4.tar… Refer to http://pigeonhole.dovecot.org and the Dovecot v2.x wiki for more information. Have fun testing this new release and don't hesitate to notify me when there are any problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

2 5

v2.2.15 released
by Timo Sirainen 30 Oct '14

30 Oct '14

http://dovecot.org/releases/2.2/dovecot-2.2.15.tar.gz http://dovecot.org/releases/2.2/dovecot-2.2.15.tar.gz.sig Some small fixes and changes to v2.2.14. This release is mainly in the hope that it could still make it into the next Debian stable instead of v2.2.14 - mainly because of a couple of new assert crashes that started happening in v2.2.14 and should be fixed now. * Plugins can now print a banner comment in doveconf output (typically the plugin version) * Replication plugin now triggers low (instead of high) priority for mail copying operations. * IMAP/POP3/ManageSieve proxy: If destination server can't be connected to, retry connecting once per second up to the value of proxy_timeout. This allows quick restarts/upgrades on the backend server without returning login failures. * Internal passdb lookups (e.g. done by lmtp/doveadm proxy) wasn't returning failure in some situations where it should have (e.g. allow_nets mismatch) * LMTP uses mail_log_prefix now for logging mail deliveries instead of a hardcoded prefix. The non-delivery log prefix is still hardcoded though. + passdb allow_nets=local matches lookups that don't contain an IP address (internally done by Dovecot services) + Various debug logging and error logging improvements - Various race condition fixes to LAYOUT=index - v2.2.14 virtual plugin crashed in some situations

8 13

smtp lastlogin
by Eduardo Ramos 30 Oct '14

30 Oct '14

Hey guys! I've been googling without success. Do anyone know if there is a way to track last login of a smtp authentication? I've tried without success using: service auth { executable = auth lastlogin unix_listener auth-userdb { } unix_listener /var/spool/postfix/private/auth { mode = 0660 group = postfix } } service lastlogin { executable = script-login -d /usr/local/bin/lastlogin.sh unix_listener lastlogin { user = $default_internal_user mode = 0666 } }

3 2

[Pigeonhole] Problem compiling latest snapshot
by Bernd Kuhls 29 Oct '14

29 Oct '14

Hi, http://hg.rename-it.nl/dovecot-2.2-pigeonhole/rev/a1e57385b267 added the use of update-version.sh, but this file and is-tagged.py are not included in Pigeonhole, only in Dovecot sourcecode. Therefore pigeonhole- version.h is not generated during compilation leading to a compile error: ../../../../src/lib-sieve/sieve-config.h:8:32: fatal error: pigeonhole- version.h: No such file or directory #include "pigeonhole-version.h" Regards, Bernd

2 1

Pigeonhole 0.4.4 error with no sieve rules
by James 29 Oct '14

29 Oct '14

I have built and installed Pigeonhole 0.4.4 with Dovecot 2.2.15. For users with no sieve at all I am getting an error on delivery. Delivery is from exim via lmtp. Syslog: Oct 28 11:03:50 mailhost dovecot: [ID 583609 mail.crit] lmtp(18915): Fatal: master: service(lmtp): child 18915 killed with signal 11 (core not dumped - set service lmtp { drop_priv_before_exec=yes }) There is no global sieve script because there is no global sieve rule. Where an account has sieve rules delivery works as expected. To make it work again I've gone back to 2.2.15 with 0.4.3. James.

3 10

Dovecot 2.2.14 and per user \Seen flags
by Thomas Robers 29 Oct '14

29 Oct '14

Hello, I have a Dovecot Installation Version 2.2.14 on CentOS 6.5 with shared folder. UserA shares his INBOX to user UserB. I activated "per user \Seen flags" with location = maildir:%%h/Maildir:INDEX=%h/shared/%%u:CONTROL=%h/shared/%%u:INDEXPVT=%h/shared I think the INDEXPVT setting activates this setting, right? I activated this setting when there were already several accounts in use. Before we used shared \Seen flags. But this setting doesn't work on my system. For example UserB marks several Messages as read in a shared INBOX from UserA and erverything seems alright but then suddenly all seen Messages are marked as unread again and I see the following error message in the log file: Oct 27 14:40:48 mail dovecot: imap(UserB(a)tutech.de): Error: /export/home/imap/UserB(a)tutech.de /shared/.INBOX/dovecot.index.pvt reset, view is now inconsistent Oct 27 14:40:48 mail dovecot: imap(UserB(a)tutech.de): Disconnected: BUG: Unknown internal error in=1020 out=2757 My Dovecot configuration is: root@mail:~# doveconf -n # 2.2.14: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-431.29.2.el6.x86_64 x86_64 CentOS release 6.5 (Final) ext4 auth_master_user_separator = * auth_mechanisms = plain login auth_verbose = yes disable_plaintext_auth = no mail_debug = yes mail_location = maildir:/export/home/imap/%Lu/Maildir mail_plugins = acl zlib managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave duplicate mbox_write_locks = fcntl namespace { hidden = no ignore_on_failure = no inbox = no list = children location = maildir:%%h/Maildir:INDEX=%h/shared/%%u:CONTROL=%h/shared/%%u:INDEXPVT=%h/shared prefix = shared/%%u/ separator = / subscriptions = yes type = shared } namespace inbox { hidden = no inbox = yes list = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = INBOX/ separator = / type = private } passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile:/etc/dovecot/global-acls:cache_secs=300 acl_shared_dict = file:/export/home/shared-db/shared-mailboxes mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size zlib_save = gz zlib_save_level = 6 } protocols = imap pop3 lmtp sieve service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } unix_listener auth-userdb { group = vmail mode = 0660 user = vmail } } service imap-login { process_limit = 500 process_min_avail = 20 } service lmtp { inet_listener lmtp { address = 127.0.0.1 port = 24 } } ssl = required ssl_cert = </etc/pki/dovecot/certs/mail.tutech.de.crt_chain ssl_key = </etc/pki/dovecot/private/mail.tutech.de.key ssl_protocols = !SSLv3 !SSLv2 syslog_facility = local6 userdb { args = /etc/dovecot/dovecot-ldap-userdb.conf.ext driver = ldap } protocol lmtp { mail_plugins = acl zlib sieve } protocol imap { mail_plugins = acl zlib imap_zlib imap_acl } I don't know, is there something wrong with my configuration, am I missing sonething? Any hint would be helpful. Thank you Best regards Thomas

2 2

Panic: file istream-qp-decoder.c
by Urban Loesch 29 Oct '14

29 Oct '14

Hi, I'm running Dovecot EE Version with Debian Squeeze. Version info: ii dovecot-ee-core 1:2.2.13.31-1 secure mail server that supports mbox, maildir, dbox and mdbox mailboxes ii dovecot-ee-dbg 1:2.2.13.31-1 debug symbols for Dovecot ii dovecot-ee-imapd 1:2.2.13.31-1 secure IMAP server that supports mbox, maildir, dbox and mdbox mailboxes ii dovecot-ee-lmtpd 1:2.2.13.31-1 secure LMTP server for Dovecot ii dovecot-ee-managesieved 0.4.3-7 secure ManageSieve server for Dovecot ii dovecot-ee-mysql 1:2.2.13.31-1 MySQL support for Dovecot ii dovecot-ee-pop3d 1:2.2.13.31-1 secure POP3 server that supports mbox, maildir, dbox and mdbox mailboxes ii dovecot-ee-sieve 0.4.3-7 sieve filters support for Dovecot Yesterday I got the following errors in the error log: Oct 28 18:29:05 mailstore dovecot: imap(user(a)domain.com pid:37052 session:<0K7g+34GIwDD/vzI>): Panic: file istream-qp-decoder.c: line 102 (i_stream_qp_decoder_read): assertion failed: (ret < 0) Oct 28 18:29:05 mailstore dovecot: imap(user(a)domain.com pid:37052 session:<0K7g+34GIwDD/vzI>): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x6d75a) [0x7f9bcee0275a] -> /usr/lib/dovecot/libdovecot.so.0(+0x6d7d6) [0x7f9bcee027d6] -> /usr/lib/dovecot/libdovecot.so.0(i_error+0) [0x7f9bcedba5bf] -> /usr/lib/dovecot/libdovecot.so.0(+0x5a86c) [0x7f9bcedef86c] -> /usr/lib/dovecot/libdovecot.so.0(i_stream_read+0x63) [0x7f9bcee0b533] -> /usr/lib/dovecot/libdovecot.so.0(+0x7bc5c) [0x7f9bcee10c5c] -> /usr/lib/dovecot/libdovecot.so.0(+0x7c0c8) [0x7f9bcee110c8] -> /usr/lib/dovecot/libdovecot.so.0(i_stream_read+0x63) [0x7f9bcee0b533] -> /usr/lib/dovecot/libdovecot.so.0(i_stream_read_data+0x52) [0x7f9bcee0b8a2] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0xa44ea) [0x7f9bcf10c4ea] -> /usr/lib/dovecot/libdovecot-storage.so.0(index_mail_get_binary_stream+0x135) [0x7f9bcf10c9b5] -> /usr/lib/dovecot/libdovecot-storage.so.0(mail_get_binary_stream+0x61) [0x7f9bcf0e34f1] -> /usr/lib/dovecot/libdovecot-storage.so.0(imap_msgpart_open+0xb0) [0x7f9bcf142f20] -> dovecot/imap() [0x41ba26] -> dovecot/imap() [0x419b4a] -> dovecot/imap(imap_fetch_more+0x31) [0x419d81] -> dovecot/imap(cmd_fetch+0x49d) [0x40e88d] -> dovecot/imap(command_exec+0x3d) [0x41813d] -> dovecot/imap() [0x417230] -> dovecot/imap() [0x41731d] -> dovecot/imap(client_handle_input+0x11d) [0x41759d] -> dovecot/imap(client_input+0x6f) [0x41792f] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x4e) [0x7f9bcee12f1e] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0xaf) [0x7f9bcee1409f] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x9) [0x7f9bcee12fa9] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7f9bcee13038] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f9bcedbf3e3] -> dovecot/imap(main+0x2a7) [0x420e97] Oct 28 18:29:05 mailstore dovecot: imap(user(a)domain.com pid:37052 session:<0K7g+34GIwDD/vzI>): Fatal: master: service(imap): child 37052 killed with signal 6 (core dumps disabled) Oct 28 18:29:58 mailstore dovecot: imap(user(a)domain.com pid:38868 session:<eAIJ/34GpADD/vzI>): Panic: file istream-qp-decoder.c: line 102 (i_stream_qp_decoder_read): assertion failed: (ret < 0) Oct 28 18:29:58 mailstore dovecot: imap(user(a)domain.com pid:38868 session:<eAIJ/34GpADD/vzI>): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x6d75a) [0x7f8f7cb9275a] -> /usr/lib/dovecot/libdovecot.so.0(+0x6d7d6) [0x7f8f7cb927d6] -> /usr/lib/dovecot/libdovecot.so.0(i_error+0) [0x7f8f7cb4a5bf] -> /usr/lib/dovecot/libdovecot.so.0(+0x5a86c) [0x7f8f7cb7f86c] -> /usr/lib/dovecot/libdovecot.so.0(i_stream_read+0x63) [0x7f8f7cb9b533] -> /usr/lib/dovecot/libdovecot.so.0(+0x7bc5c) [0x7f8f7cba0c5c] -> /usr/lib/dovecot/libdovecot.so.0(+0x7c0c8) [0x7f8f7cba10c8] -> /usr/lib/dovecot/libdovecot.so.0(i_stream_read+0x63) [0x7f8f7cb9b533] -> /usr/lib/dovecot/libdovecot.so.0(i_stream_read_data+0x52) [0x7f8f7cb9b8a2] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0xa44ea) [0x7f8f7ce9c4ea] -> /usr/lib/dovecot/libdovecot-storage.so.0(index_mail_get_binary_stream+0x135) [0x7f8f7ce9c9b5] -> /usr/lib/dovecot/libdovecot-storage.so.0(mail_get_binary_stream+0x61) [0x7f8f7ce734f1] -> /usr/lib/dovecot/libdovecot-storage.so.0(imap_msgpart_open+0xb0) [0x7f8f7ced2f20] -> dovecot/imap() [0x41ba26] -> dovecot/imap() [0x419b4a] -> dovecot/imap(imap_fetch_more+0x31) [0x419d81] -> dovecot/imap(cmd_fetch+0x49d) [0x40e88d] -> dovecot/imap(command_exec+0x3d) [0x41813d] -> dovecot/imap() [0x417230] -> dovecot/imap() [0x41731d] -> dovecot/imap(client_handle_input+0x11d) [0x41759d] -> dovecot/imap(client_input+0x6f) [0x41792f] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x4e) [0x7f8f7cba2f1e] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0xaf) [0x7f8f7cba409f] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x9) [0x7f8f7cba2fa9] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7f8f7cba3038] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f8f7cb4f3e3] -> dovecot/imap(main+0x2a7) [0x420e97] Oct 28 18:29:58 mailstore dovecot: imap(user(a)domain.com pid:38868 session:<eAIJ/34GpADD/vzI>): Fatal: master: service(imap): child 38868 killed with signal 6 (core dumps disabled) The user uses Horde Webmail 5.2 to access his mailbox and there are about 1300 active session running curently on that server. Many thanks Urban Loesch

1 0

maildir++ quota support on dovecot
by Mirko ML 28 Oct '14

28 Oct '14

Some information about maildir++ that I have read: http://www.inter7.com/courierimap/README.maildirquota.html http://wiki2.dovecot.org/Quota/Maildir When I have to deliver a message with an MDA I can use dovecot-lda. If I have enabled "quota = maildir:User quota" I am pretty sure that in the mailbox on file system I find a file named "maildirsize" maildirsize on top contain something like this "xxxxxxxxxxS" that specifies the SIZE quota in bytes. LDA could delivery the message only when the SIZE written in mailbox is less than the SIZE defined by mail admin. "Each member of the list consists of an integer followed by a letter, specifying the nature of the quota. Currently defined quota types are 'S' - total size of all messages, and 'C' - the maximum count of messages in the maildir. For example, 10000000S,1000C specifies a quota of 10,000,000 bytes or 1,000 messages, whichever comes first." For this reason the value in bytes defined for the user must have S at the end. At the moment quota-maildir.c contains a control for S or C so I can find this in log: Quota rule: root=User quota mailbox=* bytes=20971520 messages=0 But quota-util.c do not contains a control for C and S, so probably the support of maildir++ format is not complete. Please let me know if I am wrong. -- Ciao Mirko

1 0

Namespaces (or another way) to put messages in a different drive
by Paulino Michelazzo 28 Oct '14

28 Oct '14

Hello people, I have a situation where I need to create a mailbox for clients where they put old messages (> 1year) but I would like to create this mailbox in a different disk. I have a server with the mailboxes and a storage mapped using NFS just to create those mailboxes for old messages. I was trying to namespaces but every time that I make the configurations, the authentication system stop and the clients can’t log in. I really don’t know if this is the best approach for my situation (mailbox with old emails in a storage) and, if namespaces can solve it. The infos that I have are: Dovecot version 2.1.7 mailboxes: Namespace configs: namespace { type = private separator = / prefix = #location defaults to mail_location. inbox = yes } namespace { type = private separator / prefix = storage/ location = /mnt/exibstor/%u inbox = no hidden = no list = yes } If someone knows how can I do that, I really appreciate it. Best regards, Paulino Michelazzo

1 0

dovecot ldap quota
by Mirko ML 28 Oct '14

28 Oct '14

First of all: doveconf -n # 2.2.9: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.7 ext4 auth_mechanisms = plain login disable_plaintext_auth = no mail_debug = yes mail_gid = vmail mail_location = maildir:/home/vmail/domains/%d/%n mail_plugins = " quota" mail_temp_dir = /var/tmp mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave spamtest spamtestplus namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = INBOX. separator = . } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename quota = maildir:User quota sieve = ~/.dovecot.sieve sieve_default = /var/lib/dovecot/sieve/default.sieve sieve_dir = ~/sieve sieve_extensions = +spamtest +spamtestplus +relational +comparator-i;ascii-numeric sieve_global_dir = /var/lib/dovecot/sieve/global/ } protocols = " imap sieve pop3" service auth { unix_listener auth-userdb { user = vmail } } service imap-login { inet_listener imap { address = * port = 143 } inet_listener imaps { address = * port = 993 ssl = yes } } service managesieve-login { inet_listener sieve { address = 127.0.0.1 port = 4190 } } service pop3-login { inet_listener pop3 { address = * port = 110 } inet_listener pop3s { address = * port = 995 ssl = yes } } ssl_cert = </etc/dovecot/dovecot.pem ssl_key = </etc/dovecot/private/dovecot.pem userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh grep -v '^ *$#.*$\?$' dovecot-ldap.conf.ext uris = ldap://localhost dn = cn=phamm,o=hosting,dc=example,dc=com dnpass = ops auth_bind = yes ldap_version = 3 base = o=hosting,dc=example,dc=com deref = never user_attrs = quota=quota_rule=*:bytes=%$ user_filter = (&(objectClass=VirtualMailAccount)(accountActive=TRUE)(mail=%u)) pass_attrs = mail=user,userPassword=password pass_filter = (&(objectClass=VirtualMailAccount)(accountActive=TRUE)(mail=%u)) And at the end the problem that i see on log: Oct 27 20:42:36 mail dovecot: imap: Debug: Loading modules from directory: /usr/lib/dovecot/modules Oct 27 20:42:36 mail dovecot: imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib10_quota_plugin.so Oct 27 20:42:36 mail dovecot: imap: Debug: Added userdb setting: plugin/quota_rule=*:bytes=20971520S Oct 27 20:42:36 mail dovecot: imap(ops(a)klez.it): Debug: Effective uid=1001, gid=1001, home= Oct 27 20:42:36 mail dovecot: imap(ops(a)klez.it): Debug: Quota root: name=User quota backend=maildir args= Oct 27 20:42:36 mail dovecot: imap(ops(a)klez.it): Debug: Quota rule: root=User quota mailbox=* bytes=20971520 messages=0 Oct 27 20:42:36 mail dovecot: imap(ops(a)klez.it): Error: user ops(a)klez.it: Initialization failed: Failed to initialize quota: Invalid quota root quota: Invalid rule *:bytes=20971520S: Invalid rule limit value 'bytes=20971520S': Unknown unit: S Oct 27 20:42:36 mail dovecot: imap(ops(a)klez.it): Error: Invalid user settings. Refer to server log for more information. I cant understand this 2 line: Oct 27 20:42:36 mail dovecot: imap(ops(a)klez.it): Debug: Quota rule: root=User quota mailbox=* bytes=20971520 messages=0 Oct 27 20:42:36 mail dovecot: imap(ops(a)klez.it): Error: user ops(a)klez.it: Initialization failed: Failed to initialize quota: Invalid quota root quota: Invalid rule *:bytes=20971520S: Invalid rule limit value 'bytes=20971520S': Unknown unit: S This is a situation that I want to migrate from courier to dovecot.. I see this post http://y6.gl/nnheTd that seems to have my problem. Could you help me to prepare a working conf? So I can write a simple doc for this? TIA -- Ciao Mirko

3 3

how to migration exchange'mail to dovecot?
by 576709166 28 Oct '14

28 Oct '14

hi : i want to migration all users's mails of exchange server to our dovecot:but i don't know how to do this ? i know that exchange server can put users's mails to file.pst , but i don't know hwo to convent file.pst to file.eml . please help thanks !

2 1

Error renaming folders with spaces
by mtrainer＠cloud-free.com 28 Oct '14

28 Oct '14

Hi All, I am getting frequent errors of the form below. In most cases the path has spaces in it. Oct 24 07:27:08 mailstore03 dovecot: imap(sam(a)userdomain.com.au): Error: rename(/home8/rs7-username/mail/xyzmortgages.com.au/sam/.Valuations - ABC, /home8/rs7-username/mail/xyzmortgages.com.au/sam/.Valuations - ABC/Subfolder) failed: Invalid argument The user home directories are on NFSv3 and are the user attributes are stored in ldap. My config is below. Any ideas what is causing these errors? Thanks Murray # doveconf -n # 2.2.9: /etc/dovecot/dovecot.conf doveconf: Warning: service auth { client_limit=40960 } is lower than required under max. load (41280) doveconf: Warning: service anvil { client_limit=40970 } is lower than required under max. load (41183) # OS: Linux 3.14-0.bpo.2-amd64 x86_64 Debian 7.5 auth_cache_size = 64 M auth_cache_ttl = 2 hours auth_failure_delay = 0 auth_mechanisms = plain login auth_username_chars = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789!#$-=?^_{}~./@+%" auth_username_translation = +@ auth_worker_max_count = 256 base_dir = /var/run/dovecot/ disable_plaintext_auth = no first_valid_gid = 1001 first_valid_uid = 1001 mail_fsync = always mail_location = maildir:~/ maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mmap_disable = yes namespace { inbox = yes location = prefix = INBOX. type = private } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile quota = maildir quota_rule = INBOX.Trash:ignore } protocols = " imap lmtp sieve pop3" service anvil { client_limit = 40970 } service auth-worker { user = dovecot } service auth { client_limit = 40960 unix_listener auth-userdb { group = mail mode = 0666 user = dovecot } } service imap-login { chroot = login inet_listener imap { address = *, [::] port = 143 } inet_listener imaps { address = * port = 993 ssl = yes } process_limit = 20480 process_min_avail = 32 service_count = 0 user = dovecot vsz_limit = 256 M } service imap { process_limit = 40960 vsz_limit = 512 M } service lmtp { inet_listener lmtp { address = 27.54.95.43 port = 24 } process_min_avail = 32 } service managesieve-login { client_limit = 40960 process_limit = 120 process_min_avail = 5 service_count = 0 vsz_limit = 64 M } service managesieve { process_limit = 4096 vsz_limit = 256 M } service pop3-login { chroot = login inet_listener pop3 { address = *, [::] port = 110 } inet_listener pop3s { address = * port = 995 ssl = yes } process_limit = 20480 process_min_avail = 32 service_count = 0 user = dovecot vsz_limit = 256 M } service pop3 { process_limit = 40960 vsz_limit = 256 M } ssl_cert =

2 4

doveadm throws Panic: file dsync-mailbox-tree-fill.c: line 65
by Cassidy Larson 28 Oct '14

28 Oct '14

Running 2.2.15 on FreeBSD 10.0. Forcing replication with: doveadm replicator replicate -f user(a)host.com on one user that I've seen some syslogs show up to see what's going on. Other users are fine. When I run the above command on the one user it produces a core dump. See below for syslog output and full backtrace: syslog output: Oct 26 22:44:09 d3cstorage dovecot: dsync-server(user(a)host.com): Panic: file dsync-mailbox-tree-fill.c: line 65 (dsync_mailbox_tree_get_selectable): assertion failed: (status_r->uidvalidity != 0) Oct 26 22:44:09 d3cstorage dovecot: dsync-server(user(a)host.com): Fatal: master: service(doveadm): child 67571 killed with signal 6 (core dumped) Oct 26 22:44:09 d3cstorage kernel: pid 67571 (doveadm-server), uid 127: exited on signal 6 (core dumped) bt full: #0 0x0000000040f73e1a in kill () from /lib/libc.so.7 #1 0x0000000040f72ac9 in abort () from /lib/libc.so.7 #2 0x0000000040bd6fa4 in default_fatal_handler () from /usr/local/lib/dovecot/libdovecot.so.0 #3 0x0000000040bd7ca1 in i_set_failure_internal () from /usr/local/lib/dovecot/libdovecot.so.0 #4 0x0000000040bd7249 in i_panic () from /usr/local/lib/dovecot/libdovecot.so.0 #5 0x0000000000428014 in dsync_mailbox_tree_fill () #6 0x000000000041e0e6 in dsync_brain_mailbox_trees_init () #7 0x000000000041bb27 in dsync_brain_run () #8 0x000000000041b41f in dsync_brain_master_init () #9 0x000000000042ac54 in dsync_ibc_init_stream () #10 0x0000000040be9443 in io_loop_call_io () from /usr/local/lib/dovecot/libdovecot.so.0 #11 0x0000000040beaafd in io_loop_handler_run_internal () from /usr/local/lib/dovecot/libdovecot.so.0 #12 0x0000000040be9688 in io_loop_run () from /usr/local/lib/dovecot/libdovecot.so.0 #13 0x000000000040ec49 in doveadm_dsync_main () #14 0x0000000000410fe9 in doveadm_mail_single_user () #15 0x000000000041a89c in client_connection_create () #16 0x0000000040be9443 in io_loop_call_io () from /usr/local/lib/dovecot/libdovecot.so.0 #17 0x0000000040beaafd in io_loop_handler_run_internal () from /usr/local/lib/dovecot/libdovecot.so.0 #18 0x0000000040be9688 in io_loop_run () from /usr/local/lib/dovecot/libdovecot.so.0 #19 0x0000000040b90a58 in master_service_run () from /usr/local/lib/dovecot/libdovecot.so.0 #20 0x000000000041ae15 in main () Config snippets: service doveadm { drop_priv_before_exec = yes inet_listener { port = 12345 } } service replicator { process_min_avail = 1 unix_listener replicator-doveadm { group = mailsys mode = 0666 user = mailsys } unix_listener replicator { group = mailsys mode = 0666 user = mailsys } } Anything else I can provide? Thanks! Cassidy

2 4

dsync-server throwing Resource temporarily available
by Cassidy Larson 28 Oct '14

28 Oct '14

Running 2.2.15 on FreeBSD 10.0 with two back end storage boxes using TCP to sync. Seeing a couple of users that always seem to be throwing these kind of errors in the logs: dovecot: dsync-server(user(a)host.com): Error: write(/var/run/dovecot/replicator-doveadm) failed: Resource temporarily unavailable Just wondering what's the proper course of action to fix it? Thanks.

2 1

An easy fix for "dovecot.map.index corrupted: map_uid=xxxx refcount too low"?
by Ralf Hildebrandt 28 Oct '14

28 Oct '14

Is there an easy way of "fixing" these? Oct 26 13:24:52 imap(account@domain): Error: mdbox map /var/mail/domain/account/mdbox/storage/dovecot.map.index corrupted: map_uid=2700 refcount too low (dovecot 2.1.17) -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein

2 1

Sieve: carry global variables from sieve_before to user sieve scripts
by Alexander 'Leo' Bergolth 26 Oct '14

26 Oct '14

Hi! Is there a way to initialize global variables with default values in sieve_before scripts that can be used in the sieve_default script or in user scripts? I've tried the following code but this doesn't work.. before.d/10-set-defaults.sieve: -------------------- 8< -------------------- require ["variables", "include"]; require "vnd.dovecot.debug"; set "global.S_TESTVAR leo"; debug_log "LEO SIEVE: in before.d/10-set-defaults, S_TESTVAR: ${global.S_TESTVAR}"; -------------------- 8< -------------------- default.sieve: -------------------- 8< -------------------- require ["variables", "include"]; require "vnd.dovecot.debug"; global "S_TESTVAR"; debug_log "LEO SIEVE: in default.sieve: S_TESTVAR: ${global.S_TESTVAR}, ${S_TESTVAR}"; -------------------- 8< -------------------- Is there any other way to set up defaults in a global sieve script? Cheers, --leo -- e-mail ::: Leo.Bergolth (at) wu.ac.at fax ::: +43-1-31336-906050 location ::: IT-Services | Vienna University of Economics | Austria

2 2

imap-postlogin and doveadm
by Hans Morten Kind 26 Oct '14

26 Oct '14

We are configuring location= running a bash-script during imap-postlogin setting $MAIL in $USERDB_KEYS, as described in wiki/PostLoginScripting.txt This works fine. However, running a command like 'dovadm index [-u user] folder' only works for users with settings that match the default in mail_location= Would it be possible to make the location available for doveadm in a similar way, either with command line arguments or in the enviroment? hmk

3 4

master: Error: service(log): command startup failed, throttling for 2 secs
by Reindl Harald 26 Oct '14

26 Oct '14

master: Error: service(log): command startup failed, throttling for 2 secs i see that due restart on any machine acting as IMAP/POP3 proxy why?

2 7

Dovecote 1.2.17 poodle
by Marc Rantanen 26 Oct '14

26 Oct '14

Hi, how do I protect dovecot 1.2.17 against poodle? Br /Marc

5 8

Dynamic tags in email address
by Felix Gustavsson 25 Oct '14

25 Oct '14

I'm trying to get dynamic tagging (user+sometag(a)example.com) to work on a mail server I'm setting up, however it only works as long as it's sent to the main user and not to aliases. virtual-alias-maps query: SELECT get_email_alias_dyn('%s') virtual-mailbox-domains query: SELECT 1 FROM domain WHERE name='%s' virtual-mailbox-maps query: SELECT 1 FROM user_alias INNER JOIN domain ON user_alias.domainID = domain.id WHERE user_alias.primary = 1 AND CONCAT(user_alias.name, '@', domain.name)='%s' "get_email_alias_dyn()" is a stored function which returns the destination email, so alias+tag(a)example.com returns user(a)example.com, alias(a)example.com returns user(a)example.com and so on. It works perfectly fine when the mail does not contain any tags (alias(a)example.com or user(a)example.com) or if it's the primary email which contains tags (user+sometag(a)example.com) but when it's tags on an alias the mail is bounced due to "user unknown". I tried modifying the dovecot service in master.cf so the addresses can be filtered with Sieve (http://wiki2.dovecot.org/LDA/Postfix) but that did not solve the issue either, so I have not idea where it goes wrong or how to solve it. I have included the logs from when I sent to alias+tag(a)example.com below: Oct 25 19:54:20 xx postfix/smtpd[10987]: connect from mail-wg0-f50.google.com[74.125.82.50] Oct 25 19:54:21 xx postfix/smtpd[10987]: 10585DFA63: client=mail-wg0-f50.google.com[74.125.82.50] Oct 25 19:54:21 xx postfix/cleanup[10995]: 10585DFA63: message-id=<CAGPeO-YcJwbRJb-Gfga+G_vKqj9cm80rMZf9LAfENRCFfxLVAg(a)mail.gmail.com> Oct 25 19:54:25 xx postfix/qmgr[9945]: 10585DFA63: from=<xx(a)gmail.com>, size=1743, nrcpt=1 (queue active) Oct 25 19:54:25 xx postfix/smtpd[10987]: disconnect from mail-wg0-f50.google.com[74.125.82.50] Oct 25 19:54:25 xx dovecot: auth-worker(11000): mysql(127.0.0.1): Connected to database mailcp Oct 25 19:54:25 xx postfix/pipe[10998]: 10585DFA63: to=<xx+test(a)xx.com>, relay=dovecot, delay=5.4, delays=5.4/0/0/0.03, dsn=5.1.1, status=bounced (user unknown) Oct 25 19:54:25 xx postfix/cleanup[10995]: D39B2DFC7D: message-id=<20141025175425.D39B2DFC7D(a)xx.com> Oct 25 19:54:25 xx postfix/bounce[11002]: 10585DFA63: sender non-delivery notification: D39B2DFC7D Oct 25 19:54:25 xx postfix/qmgr[9945]: D39B2DFC7D: from=<>, size=3937, nrcpt=1 (queue active) Oct 25 19:54:25 xx postfix/qmgr[9945]: 10585DFA63: removed Oct 25 19:54:26 xx postfix/smtp[11004]: D39B2DFC7D: to=<xx(a)gmail.com>, relay=gmail-smtp-in.l.google.com[74.125.195.27]:25, delay=0.24, delays=0/0/0.16/0.07, dsn=2.0.0, status=sent (250 2.0.0 OK 1414259666 d8si5463492wiv.41 - gsmtp) Oct 25 19:54:26 xx postfix/qmgr[9945]: D39B2DFC7D: removed The dovecot-sql.conf.ext file looks like this: driver = mysql connect = host=127.0.0.1 dbname=mailcp user=mailcp password=xxx default_pass_scheme = SHA512-CRYPT password_query = SELECT CONCAT(user_alias.name, '@', domain.name) as user, user.password as password, concat('*:bytes=', (CASE WHEN user.quota -1 THEN user.quota ELSE domain.quota END)*1000000) AS userdb_quota_rule FROM user INNER JOIN user_alias ON user.id = user_alias.userID AND user_alias.primary = 1 INNER JOIN domain ON user_alias.domainID = domain.id WHERE CONCAT(user_alias.name, '@', domain.name) ='%u' AND user.status = 1 user_query = SELECT CONCAT('/var/mail/vmail/', domain.name, '/', user_alias.name) as home, 5000 AS uid, 5000 AS gid, concat('*:bytes=', (CASE WHEN user.quota != -1 THEN user.quota ELSE domain.quota END)*1000000) AS userdb_quota_rule FROM user INNER JOIN user_alias ON user.id = user_alias.userID AND user_alias.primary = 1 INNER JOIN domain ON user_alias.domainID = domain.id WHERE CONCAT(user_alias.name, '@', domain.name) ='%u' AND user.status = 1

2 2

Sieve duplicate detection
by Bruce Bodger 25 Oct '14

25 Oct '14

Good day, Gents. We are running: dovecot 1.2.17 dovecot-1.2-sieve-0.1.19 dovecot-1.2-managesieve-0.11.13 postfix 2.4.3 on OS X 10.5.8 server. Only about 15 users access the server. No problems. My question is... what would I have to upgrade, and to what version, in order to take advantage of pigeonhole sieve's duplicate detection (vnd.dovecot.duplicate) functionality? Thank you very much. Bruce

1 0

Invoking the spam checker on the sieve script
by Alejandro Exojo 25 Oct '14

25 Oct '14

Hi. TL/DR version: Is it advisable to invoke an spam checker from the sieve script, and then, once the message is filtered, decide if should be moved to a certain spam folder? A bit more context on why I'm considering this: I'm just a geek who wants to handle his own mail, but not a great experience as a system administrator. I don't have any corporate setup, just a simple VPS with me as the only user. Previously I fetched all my mail through POP, and in the client of my PC I moved (lots of) mailing list traffic to its folders. Then, for those remaining messages (and only those remaining) I passed the spam filter and moved to spam folder. That's a significant saving since I have many mailing list subscriptions, and now I'm even using rss2email, so I have lots of email that is not spam. I moved to IMAP and my filters are server side with sieve, but I don't have spam filtering yet. I thought I could replicate the setup easily, but it seems nobody is doing that, and everyone has the mail already scored when it reaches sieve. Seems like the "extprograms" extension would be a fit, but again, nobody seems to mention on documentation, so I'm fearing I'm probably wrong. Suggestions? Thank you very much! -- Alex (a.k.a. suy) | GPG ID 0x0B8B0BC2 http://barnacity.net/ | http://disperso.net

5 8

Multiple user attributes in LDAP
by CARDENAS Eduardo SIDOR 25 Oct '14

25 Oct '14

Hello, I have an issue with dovecot and Ldap… Any help will be grateful… I have dovecot 1.2.15 and i want to know if in that version can i use two values returned from LDAP in the user_attrs template? Thanking you in anticipation… -- " Notificación Automática: Este mensaje y cualquier archivo que se adjunte contiene información privilegiada y confidencial. Es para uso exclusivo del destinatario. Si usted ha recibido esta comunicación por error, por favor avísenos inmediatamente. Automatic notification: This e-mail and any file transmitted with it are confidential and may be legally privileged. It is intended solely for the addressee and may not be disclosed to or used by anyone other than the addressee. If you have received this e-mail by mistake , please advise the sender immediately"

3 3

Where can I find change logs/release notes for Dovecot EE releases?
by deoren 25 Oct '14

25 Oct '14

I searched for them and haven't come across them yet. Could any point me in the right direction? Specifically the Ubuntu 12.04 package notes if they're split out. Thanks!

4 4

2.2.14 Panic in sync_expunge_range()
by Hans Morten Kind 25 Oct '14

25 Oct '14

I am getting some panics after upgrading from 2.2.13 to 2.2.14 This panic happens for one user only, he is subscribed to 86 folders, on two of them this panic happens quite often - several times a day. The mbox folders seems OK, less than 30M with 30 and 200 messages. Panic: file mail-index-sync-update.c: line 250 (sync_expunge_range): assertion failed: (count > 0) hmk GNU gdb 6.8 Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i386-pc-solaris2.10"... Reading symbols from /datapool/local/dovecot-2.2.14/lib/dovecot/libdovecot-storage.so.0...done. Loaded symbols for /local/dovecot-2.2.14/lib/dovecot/libdovecot-storage.so.0 Reading symbols from /datapool/local/dovecot-2.2.14/lib/dovecot/libdovecot.so.0...done. Loaded symbols for /local/dovecot-2.2.14/lib/dovecot/libdovecot.so.0 Reading symbols from /datapool/local/program/lib/libssl.so.1.0.0...done. Loaded symbols for /local/program/lib/libssl.so.1.0.0 Reading symbols from /datapool/local/program/lib/libcrypto.so.1.0.0...done. Loaded symbols for /local/program/lib/libcrypto.so.1.0.0 Reading symbols from /datapool/local/program/lib/libz.so...done. Loaded symbols for /local/program/lib/libz.so Reading symbols from /lib/libm.so.2...done. Loaded symbols for /lib/libm.so.2 Reading symbols from /datapool/local/program/lib/libiconv.so.2...done. Loaded symbols for /local/program/lib/libiconv.so.2 Reading symbols from /lib/librt.so.1...done. Loaded symbols for /lib/librt.so.1 Reading symbols from /lib/libnsl.so.1...done. Loaded symbols for /lib/libnsl.so.1 Reading symbols from /lib/libsocket.so.1...done. Loaded symbols for /lib/libsocket.so.1 Reading symbols from /lib/libsendfile.so.1...done. Loaded symbols for /lib/libsendfile.so.1 Reading symbols from /lib/libc.so.1...done. Loaded symbols for /lib/libc.so.1 Reading symbols from /lib/libdl.so.1...done. Loaded symbols for /lib/libdl.so.1 Reading symbols from /usr/lib/libz.so...done. Loaded symbols for /usr/lib/libz.so Reading symbols from /lib/libaio.so.1...done. Loaded symbols for /lib/libaio.so.1 Reading symbols from /lib/libmd.so.1...done. Loaded symbols for /lib/libmd.so.1 Reading symbols from /lib/ld.so.1...done. Loaded symbols for /lib/ld.so.1 Core was generated by `dovecot/imap imap-postlogin'. Program terminated with signal 6, Aborted. [New process 76621 ] #0 0xfe7fc8e5 in _lwp_kill () from /lib/libc.so.1 #0 0xfe7fc8e5 in _lwp_kill () from /lib/libc.so.1 No symbol table info available. #1 0xfe7f7765 in thr_kill () from /lib/libc.so.1 No symbol table info available. #2 0xfe7a376f in raise () from /lib/libc.so.1 No symbol table info available. #3 0xfe7829e1 in abort () from /lib/libc.so.1 No symbol table info available. #4 0xfeda13ba in default_fatal_finish (type=LOG_TYPE_PANIC, status=0) at failures.c:152 backtrace = 0x8093660 "0xfeda22d7 -> 0xfeda15d3 -> 0xfef31e5f -> 0xfef32d65 -> 0xfef3349e -> 0xfef33b77 -> 0xfef1dcbd -> 0xfef170e4 -> 0xfef173a4 -> 0xfef1767d -> 0xfef03e09 -> 0xfeea5540 -> 0xfeea5714 -> 0xfeea5857 -> 0xfe"... #5 0xfeda22d7 in i_internal_fatal_handler (ctx=0x8047400, format=0xfef5ebc8 "file %s: line %d (%s): assertion failed: (%s)", args=0x8047424 ".ìõþú") at failures.c:152 status = 0 #6 0xfeda15d3 in i_panic (format=0xfef5ebc8 "file %s: line %d (%s): assertion failed: (%s)") at failures.c:152 ctx = {type = LOG_TYPE_PANIC, exit_status = 0, timestamp = 0x0, timestamp_usecs = 0} args = 0x8047424 ".ìõþú" #7 0xfef31e5f in sync_expunge_range (ctx=0x8047600, seqs=0x80474d8) at ../../src/lib/array.h:197 map = (struct mail_index_map *) 0x80c5d90 range = (const struct seq_range *) 0x8093430 i = 134509780 count = 0 dest_seq1 = 562 prev_seq2 = 562 orig_rec_count = 4277606968 __FUNCTION__ = "sync_expunge_range" #8 0xfef32d65 in mail_index_sync_record_real (ctx=0x8047600, hdr=0x80b5d28, data=0x80b5df8) at ../../src/lib/array.h:197 rec = (const struct mail_transaction_expunge_guid *) 0x80b8968 end = (const struct mail_transaction_expunge_guid *) 0x80b8968 seqs = {arr = {buffer = 0x8093410, element_size = 8}, v = 0x8093410, v_modifiable = 0x8093410} seq = 0 modseq = 32612 ret = 0 __FUNCTION__ = "mail_index_sync_record_real" #9 0xfef3349e in mail_index_sync_record (ctx=0x8047600, hdr=0x80b5d28, data=0x80b5df8) at ../../src/lib/array.h:197 _data_stack_cur_id = 5 ret = 1 #10 0xfef33b77 in mail_index_sync_map (_map=0x80b5400, type=MAIL_INDEX_SYNC_HANDLER_HEAD, force=true) at ../../src/lib/array.h:197 map = (struct mail_index_map *) 0x0 index = (struct mail_index *) 0x80b53b0 view = (struct mail_index_view *) 0x80ab8b0 sync_map_ctx = {view = 0x80ab8b0, modseq_ctx = 0x809ca50, cur_ext_map_idx = 0, ext_intro_seq = 5, ext_intro_offset = 52, ext_intro_end_offset = 84, expunge_handlers = {arr = { buffer = 0x0, element_size = 0}, v = 0x0, v_modifiable = 0x0}, extra_contexts = {arr = { buffer = 0x809c348, element_size = 4}, v = 0x809c348, v_modifiable = 0x809c348}, unknown_extensions = 0x0, type = MAIL_INDEX_SYNC_HANDLER_HEAD, sync_handlers_initialized = 0, expunge_handlers_set = 0, expunge_handlers_used = 0, cur_ext_ignore = 0, internal_update = 0, errors = 0} thdr = (const struct mail_transaction_header *) 0x80b5d28 tdata = (const void *) 0x80b5df8 prev_seq = 5 start_offset = 0 prev_offset = 144 ret = 1 had_dirty = false reset = true __FUNCTION__ = "mail_index_sync_map" #11 0xfef1dcbd in mail_index_map (index=0x80b53b0, type=MAIL_INDEX_SYNC_HANDLER_HEAD) at mail-index-map-read.c:35 ret = 1 __FUNCTION__ = "mail_index_map" #12 0xfef170e4 in mail_index_try_open (index=0x80b53b0) at ../../src/lib/array.h:197 ret = 134919688 __FUNCTION__ = "mail_index_try_open" #13 0xfef173a4 in mail_index_open_files (index=0x80b53b0, flags=21) at ../../src/lib/array.h:197 ret = 1 #14 0xfef1767d in mail_index_open (index=0x80b53b0, flags=21) at ../../src/lib/array.h:197 ret = 134960048 __FUNCTION__ = "mail_index_open" #15 0xfef03e09 in index_storage_mailbox_open (box=0x80b47c8, move_to_memory=false) at index-storage.c:39 ibox = (struct index_mailbox_context *) 0x80b4a80 index_flags = 21 ret = 0 __FUNCTION__ = "index_storage_mailbox_open" #16 0xfeea5540 in mbox_mailbox_open_finish (mbox=0x80b47c8, move_to_memory=false) at mbox-storage.c:77 No locals. #17 0xfeea5714 in mbox_mailbox_open_existing (mbox=0x80b47c8) at mbox-storage.c:77 box = (struct mailbox *) 0x80b47c8 rootdir = 0xfeea581f "\215\225`ÿÿÿ\211T$\004\211\004$è\023¨ûÿ\211Eð\203}ð" box_path = 0x80b4b78 "/Home/USER/mail/pro/triad" move_to_memory = false #18 0xfeea5857 in mbox_mailbox_open (box=0x80b47c8) at mbox-storage.c:77 mbox = (struct mbox_mailbox *) 0x80b47c8 st = {st_dev = 82051096, st_pad1 = {0, 0, 0}, st_ino = 4141941, st_mode = 33152, st_nlink = 1, st_uid = 32440, st_gid = 4601, st_rdev = 0, st_pad2 = {0, 0}, st_size = 16826589, st_atim = { tv_sec = 1411034237, tv_nsec = 0}, st_mtim = {tv_sec = 1413152136, tv_nsec = 0}, st_ctim = { tv_sec = 1413659956, tv_nsec = 975959000}, st_blksize = 8192, st_blocks = 33016, st_fstype = "nfs", '\0' <repeats 12 times>, st_pad4 = {0, 0, 0, 0, 0, 0, 0, 0}} ret = 0 #19 0xfeec94cc in mailbox_open_full (box=0x80b47c8, input=0x0) at ../../src/lib/array.h:197 _data_stack_cur_id = 4 ret = 143 #20 0xfeec9807 in mailbox_open (box=0x80b47c8) at ../../src/lib/array.h:197 No locals. #21 0xfef024ec in index_storage_get_status (box=0x80b47c8, items=23, status_r=0x8047a04) at index-status.c:23 No locals. #22 0xfeeca8ac in mailbox_get_status (box=0x80b47c8, items=23, status_r=0x8047a04) at ../../src/lib/array.h:197 __FUNCTION__ = "mailbox_get_status" #23 0x08073ddb in imap_status_get (cmd=0x80b1fb8, ns=0x80ab1b0, mailbox=0x8093318 "pro/triad", items=0x8047a70, result_r=0x8047a04) at imap-status.c:23 client = (struct client *) 0x80b17b0 box = (struct mailbox *) 0x80b47c8 errstr = 0x8064d84 "\205Àu\034\213\205hÿÿÿÇD$\004\005" ret = 0 #24 0x08064e65 in cmd_status (cmd=0x80b1fb8) at cmd-status.c:23 client = (struct client *) 0x80b17b0 args = (const struct imap_arg *) 0x80ab240 list_args = (const struct imap_arg *) 0x80ab328 items = {status = 23, metadata = 0} result = {status = {messages = 0, recent = 0, unseen = 0, uidvalidity = 0, uidnext = 0, first_unseen_seq = 0, first_recent_uid = 0, last_cached_seq = 0, highest_modseq = 0, highest_pvt_modseq = 0, keywords = 0x0, permanent_flags = 0, permanent_keywords = 0, allow_new_keywords = 0, nonpermanent_modseqs = 0, no_modseq_tracking = 0, have_guids = 1, have_save_guids = 0, have_only_guid128 = 0}, metadata = { guid = "\000\000\000\000\001\000\000\000\r\000\000\000\033\000\000", virtual_size = 2199023255593, cache_fields = 0xfe7a67f2, precache_fields = 134861792, backend_ns_prefix = 0x80921a8 "0(\t\b\030", backend_ns_type = 134511236}, error = 134654712, errstr = 0x80b2038 "STATUS"} ns = (struct mail_namespace *) 0x80ab1b0 mailbox = 0x8093318 "pro/triad" orig_mailbox = 0x80ab2f8 "pro/triad" selected_mailbox = false #25 0x0806aa61 in command_exec (cmd=0x80b1fb8) at imap-commands.c:101 hook = (const struct command_hook *) 0x809bfd8 ret = 8 #26 0x080699d2 in client_command_input (cmd=0x80b1fb8) at imap-client.c:130 client = (struct client *) 0x80b17b0 command = (struct command *) 0x3 __FUNCTION__ = "client_command_input" #27 0x08069cb7 in client_command_input (cmd=0x80b1fb8) at imap-client.c:130 client = (struct client *) 0x80b17b0 command = (struct command *) 0x809d3d4 __FUNCTION__ = "client_command_input" #28 0x08069dba in client_handle_next_command (client=0x80b17b0, remove_io_r=0x8047b9d) at imap-client.c:130 No locals. #29 0x08069e57 in client_handle_input (client=0x80b17b0) at imap-client.c:130 _data_stack_cur_id = 3 ret = 10 remove_io = false handled_commands = false __FUNCTION__ = "client_handle_input" #30 0x08069fe0 in client_input (client=0x80b17b0) at imap-client.c:130 cmd = (struct client_command_context *) 0x80aa9a4 output = (struct ostream *) 0x80abe08 bytes = 55 __FUNCTION__ = "client_input" #31 0xfedba96d in io_loop_call_io (io=0x80abe70) at ioloop.c:28 ioloop = (struct ioloop *) 0x809bf20 t_id = 2 __FUNCTION__ = "io_loop_call_io" #32 0xfedbc0cc in io_loop_handler_run_internal (ioloop=0x809bf20) at ioloop-poll.c:96 ctx = (struct ioloop_handler_context *) 0x809ca10 pollfd = (struct pollfd *) 0x809e0a8 tv = {tv_sec = 1799, tv_usec = 999672} io = (struct io_file *) 0x80abe70 msecs = 1800000 ret = 0 call = true #33 0xfedbab06 in io_loop_handler_run (ioloop=0x809bf20) at ioloop.c:28 No locals. #34 0xfedbaa5d in io_loop_run (ioloop=0x809bf20) at ioloop.c:28 __FUNCTION__ = "io_loop_run" #35 0xfed41db1 in master_service_run (service=0x809be68, callback=0x80771da <client_connected>) at master-service.c:75 No locals. #36 0x08077577 in main (argc=2, argv=0x809bc78) at main.c:72 set_roots = {0x8092fe0, 0x0} login_set = {auth_socket_path = 0x80930e8 "", postlogin_socket_path = 0x8093120 "", postlogin_timeout_secs = 60, callback = 0x8076f4e <login_client_connected>, failure_callback = 0x807715d <login_client_failed>, request_auth_token = 1} service_flags = MASTER_SERVICE_FLAG_KEEP_CONFIG_OPEN storage_service_flags = MAIL_STORAGE_SERVICE_FLAG_DISALLOW_ROOT username = 0x0 c = -1

2 1

Properly "locking" a useraccount (on a proxy)
by Ralf Hildebrandt 25 Oct '14

25 Oct '14

I'm preparing a migration of several mailboxes to another machine. The different useraccounts are distributed to different backend machines by means of a dovecot LMTP/IMAP/POP proxy. Proxying is working really well (now that the kernel does as it should). But how can I "lock" a user during migration? The plan is: ============ * lock the user * kick the user (doveadm kick) * migrate mailbox (some rsync magic) * unlock the user again But how would I lock the user? What locking needs to achieve: 1) Disallow IMAP/POP login (that's easy!) 2) defer LMTP delivery somehow (Postfix is talking to dovecot's LMTP server) Because currently, we're seeing dovecot trying local delivery on the proxy machine once an account is locked (probably because LMTP proxying uses passdb lookups, and since that one is failing it's using the userdb lookup?): Oct 21 20:15:27 lmtp(87892): Error: user sys4(a)test.invalid: Initialization failed: Namespace '': mkdir(/var/mail/test.invalid/sys4/mdbox/mailboxes) failed: Permission denied (euid=10000(vmail) egid=10000(vmail) missing +w perm: /var/mail, we're not in group 8(mail), dir owned by 0:8 mode=0775) Admittedly, this is somehow working. But it's not very elegant to use a side-effect. Is the a reserved userdb/passwd return value which will let dovecot "tempfail" in a n elegant fashion? -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein

5 7

Dovecot Master/Master Replication Problem
by Felix Amler 25 Oct '14

25 Oct '14

Hi, I've set up 2 servers with dovecot 2.2.9 using maildir using structure: /var/maildir/domain/localpart Server A: mx1.xxx.de Server B: mx2.xxx.de Mails are delivered to dovecot only on server A by exim4/dovecot deliver replication to Server B works immediatelly: mark mail as read on server A, mail is marked as read on server B. BUT: when i mark a mail as read on Server B, noting happens. On Server A I get messages like this in dovecot-error.log: 2014-10-22 22:35:05 dsync-server(localpart(a)domain.de): Error: stat(/var/maildir/domain.de/localpart/.dovecot-sync.lock/tmp) failed: Not a directory 2014-10-22 22:35:05 dsync-server(localpart(a)domain.de): Error: Failed to access mailbox dovecot-sync.lock: Internal error occurred. Refer to server log for more information. [2014-10-22 22:35:05] I googled a bit, this could habben if there is a file ".dovecot-sync.lock" in the maildir, but I've double checked that, there is no such file... Why does it work in one direction, but not in the other? Please help best regards Felix

2 1

Replication .dovecot-sync.lock
by Hans-Werner Paulsen 25 Oct '14

25 Oct '14

Hello all, I have set up two servers with dovecot and replication. The mail location is mail_location = sdbox:/var/spool/mail/%u Everything works fine when I override the homedirectories userdb { driver = passwd override_fields = home=/var/spool/mail/%u } But, when I do not override the homedirectories, replication does not work, and the following error is logged: Oct 24 14:40:45 dsync-local(hans): Error: Couldn't create lock /afs/mpa/home/hans/.dovecot-sync.lock: Permission denied With a self-written module an IMAP user can get access to his homedirectory: protocol imap { mail_plugins = afsToken } The user has to type in his password. Obviously this does not work for replication. Is there a way to specify a different location for the lockfile? Isn't better to use the maildirectory but the homedirectory? Is there a way to set the homedirectory differently for replication? Thank you for any help. HW -- Hans-Werner Paulsen hans(a)MPA-Garching.MPG.DE MPI für Astrophysik Tel 089-30000-2602 Karl-Schwarzschild-Str. 1 Fax 089-30000-2235 D-85741 Garching

2 1

2.2.14 and "Panic: file virtual-sync.c"
by Michael Köhler 25 Oct '14

25 Oct '14

Hi, after upgrading to 2.2.14 (debian wheezy with apt source from rename-it.nl) I´ve got from time to time a panic in virtual plugin. Here are an excerpt from the log file: ---------------------------------- Oct 21 20:44:15 mailserver dovecot: imap(michael@DOMAIN): flag_change: box=Virtual.Ungelesen, uid=1, msgid=<54466F71.3050702(a)makomi.de>, size=1661, flags=(\Seen \Draft \Recent) Oct 21 20:44:15 mailserver dovecot: imap(michael@DOMAIN): Panic: file virtual-sync.c: line 1115 (virtual_sync_backend_box): assertion failed: (array_count(&bbox->sync_pending_removes) == 0) Oct 21 20:44:15 mailserver dovecot: imap(michael@DOMAIN): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x752af) [0x7f5f2630e2af] -> /usr/lib/dovecot/libdovecot .so.0(+0x7530e) [0x7f5f2630e30e] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f5f262c05de] -> /usr/lib/dovecot/modules/lib20_virtual_plugin.so(virtual_storage_sync_init+0x266c ) [0x7f5f24abb9cc] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x35) [0x7f5f26601195] -> dovecot/imap(imap_sync_init+0x7a) [0x41faaa] -> dovecot/imap(cmd_sync_dela yed+0x190) [0x420710] -> dovecot/imap(client_handle_input+0x1d5) [0x417a35] -> dovecot/imap(client_input+0x72) [0x417d22] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x5b) [ 0x7f5f263200fb] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0xbb) [0x7f5f2632117b] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x9) [0x7f5f26320189] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7f5f26320208] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f5f262c5ab3] -> dovecot/imap(main+0x2a1) [0x 40c311] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7f5f25f2bead] -> dovecot/imap() [0x40c475] Oct 21 20:44:15 mailserver dovecot: imap(michael@DOMAIN): Fatal: master: service(imap): child 31075 killed with signal 6 (core dumps disabled) ————————————————— Are the problem well-known? And what could I do? Thanks, Michael

2 1

dovecot-lda from postfix on remote dovecot server
by nik600 25 Oct '14

25 Oct '14

Dear all i've got many SMTP front-end that filter the mail and do some custom stuff... then when i've decided the final destination i'd like to call /usr/lib/dovecot/dovecot-lda to deliver the mail. Actually i have in master.cf: #####################à dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail null_sender= argv=/usr/lib/dovecot/dovecot-lda -f ${sender} -d ${recipient} #####################à I'd like to know if is possible to use some other command or some additional parameter to deliver the mail to a remote dovecot server. Thanks -- /*************/ nik600 http://www.kumbe.it

3 3

Replication only sporadic
by Lucas Rothamel - Eye Catching Webdesign 24 Oct '14

24 Oct '14

Hello dear Dovecot Gurus, I am setting up two servers with Dovecot replication as hot-standby servers for a small high availability cluster, switch-over through DNS-redirect. For testing purposes, both servers are generating a small test mail every few minutes and delivering to the local dovecot each. In my mail client, I added both servers through IMAP to watch how the replication is working. However, I noted that replication is very sporadic: sometimes a new email is received "instantaneous" by both servers, then no replication updates are visible for hours, and suddenly all missing mail appear in the other server. Why is this? Can this be changed to be more realtime? Thank you! Lucas doveconf -n: # 2.2.14: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.7 ext4 auth_mechanisms = plain login cram-md5 disable_plaintext_auth = no info_log_path = /var/log/dovecot-info.log log_timestamp = "%Y-%m-%d %H:%M:%S " mail_debug = yes mail_location = maildir:/home/%d/%n/Maildir mail_plugins = " notify replication" mail_privileged_group = mail passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { mail_replica = remote:vmail@... quota = maildir:User quota quota_rule = *:storage=1GB replication_full_sync_interval = 1 hours } protocols = imap pop3 service aggregator { fifo_listener replication-notify-fifo { mode = 0600 user = vmail } unix_listener replication-notify { mode = 0600 user = vmail } } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } user = root } service config { unix_listener config { user = vmail } } service doveadm { user = vmail } service replicator { process_min_avail = 1 } ssl_cert = ... ssl_key = ... userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota pop3_uidl_format = %08Xu%08Xv } protocol lda { info_log_path = /var/log/dovecot-lda.log mail_plugins = quota postmaster_address = ... } -- Lucas Rothamel Eye Catching Webdesign info(a)eye-catching-webdesign.de - www.eye-catching-webdesign.de You know, we go to the gym to keep the body fit. Similarly the mind needs some rest. The mind is bombarded with so many impressions. Our mind has been bombarded by impressions the whole time. It needs a different kind of rest other than sleep. And meditation is such a rest. It calms the mind. energizes the spirit and makes the body more strong and vibrant. improves the immune system. The immune cells, the T-cell count go higher through Sudarshan Kriya and meditation. And you feel so nice inside. - Sri Sri Ravi Shankar I love deadlines. I like the whooshing sound they make as they fly by. -- Douglas Adams

1 0

Sieve Advice Needed, Please
by Casey Bralla 24 Oct '14

24 Oct '14

Anybody here familiar with the Sieve language? I'm rebuilding my mail server, and I am working with the sieve language to automatically filter spam into a separate account. However, I've hit a snag that I can't get around. BTW, I'm using a clean install of dovecot, postfix, spamassassin on Debian 7.5. I want to do server-side spam filtering, so I've got spamasassin identifying spam, and then have sieve sorting the mail to a special spam folder. I can easily send spam to special folder in the inbox for each mail user, but I wanted to have a single mail account for spam. I can use the "redirect" sieve command to send anything with the X-spam-flag set, but this triggers an error and bounces the offending mail. The bounce message is: From: MAILER-DAEMON(a)NerdWorld.org (Mail Delivery System) To: casey(a)vmailservertest.nerdworld.org Subject: Undelivered Mail Returned to Sender Date: Sun, 19 Oct 2014 16:41:49 -0400 (EDT) This is the mail system at host VMailServerTest.NerdWorld.org. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to postmaster. If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system <spam(a)vmailservertest.nerdworld.org>: mail forwarding loop for spam(a)vmailservertest.nerdworld.org From: casey(a)vmailservertest.nerdworld.org Date: Sun, 19 Oct 2014 16:41:20 -0400 (EDT) viagra!!!! www.viagra.com I think this is a recursion problem, since the redirected mail has to go through the spamassassin check and sieve again. I tried to get clever and prevent the recursion, but I'm not clever enough. Here is my sieve rule file. # # # A rule to move spam to the spam user # based on spamassassin setting the spam flag # # # require ["redirect"]; (Not needed, since it is part of the basis sieve spec) # # rule:[SPAM] if header :contains "X-Spam-Flag" ["YES"] { if address :is "to" "Spam(a)VMailServerTest.NerdWorld.org" { keep; } else { redirect "spam(a)VMailServerTest.NerdWorld.org"; } } # # # Anybody able to give me any advice? TIA -- Casey Bralla Chief Nerd in Residence The NerdWorld Organisation www.NerdWorld.org

3 2

Re: special "what's my ip" pop account
by Joseph Tam 24 Oct '14

24 Oct '14

Steffen Kaiser writes: > let's put aside the question, if this way is sensible or not. [... continuing in nonsensible mode ...] > And if you are at it, maybe a dummy server with a self-made script that > returns "+OK POP3 your IP is ....", then return +FAIL for any further > command. Been there, done that (for a different problem). Not all mail readers will show you banners; to make this really work, you have to implement USER and PASS (accepts anything), STAT and LIST (one message available), RETR (dump your informational message payload), QUIT (disconnect), maybe TOP, and everything else is an +OK no-op. I patched Qualcomm's qpopper to do this. As to whether the OP *should* do this, definitely not. Find a better solution. Joseph Tam <jtam.home(a)gmail.com>

1 0

Public root folder is \Noselect
by G H 23 Oct '14

23 Oct '14

I am utilizing a public namespace via http://wiki2.dovecot.org/SharedMailboxes/Public and using sdbox storage format. How can I get rid of the \Noselect flag that is set by default for this folder? IMAP output: b LIST "" "*" * LIST (\HasNoChildren \Sent) "/" Sent * LIST (\HasNoChildren \Trash) "/" Trash * LIST (\Noselect \HasNoChildren) "/" Public * LIST (\HasNoChildren) "/" INBOX If this is not possible, what is the best way to create a sub-folder in here upon system setup (one w/o a \Noselect flag)? Thanks, G H

1 0

special "what's my ip" pop account
by A. Schulze 23 Oct '14

23 Oct '14

Hello, I like to enable the allow_nets Feature (http://wiki2.dovecot.org/PasswordDatabase/ExtraFields/AllowNets) for my customers. To help them knowing there own IP I imagine a special mailbox/loginuser at the pop3 server. That user could give a valid pop3 answer from a dummy pop3 server or simply throw a login error with customised answer containing the IP information. Has anybody done something similar or ideas to build such a system? Thanks for ideas Andreas

4 6

What is the correct way to configure the mail_location option for Mailidr format?
by deoren 23 Oct '14

23 Oct '14

Short version: What is the correct way to configure the mail_location option for Mailidr format? I've long had it setup this way: mail_location = maildir:/var/vmail/%d/%n based on this guide: https://www.linode.com/docs/email/postfix/email-with-postfix-dovecot-and-my… Is that correct? Longer version: After upgrading from Dovecot v2.0.x to v2.2.x yesterday I'm coming to the conclusion that I've got it configured wrong. This is probably compounded by my bright idea of explicitly setting the path separator prior to the upgrade like so: separator = . Because we're using Maildir I thought it would be useful to explicitly set the separator value to what the default is for Maildir. I figured this would be a good way to remind myself what the separator is by default. I also figured while I was merging the conf changes between v2.0 and v2.2 I could roll that additional change in also. Looks like that was a bad idea to include unnecessary changes until things had stabilized. I should know better; I was too optimistic for my own good. Here is an example error message I ran into: stat(/var/vmail/example.com/username/.dovecot.lda-dupes/tmp) failed: Not a directory which is nearly identical (other than leading path) to what is shown here: http://www.dovecot.org/list/dovecot/2010-April/048227.html Steffen Kaiser responded with, "You should not (must not) have home == maildir root." That is when I double-checked the guide that I mentioned above and found that I had followed their directions exactly for that conf setting. Looking at some other guides/tutorials shows something more like: mail_location = maildir:/var/vmail/%d/%n/Maildir I assume the latter is how it's supposed to be done? If so, that would explain the problems I've had with Sieve scripts in the past until I explicitly set 'sieve_dir' like so: sieve_dir = /var/vmail/sieve/%d/%n/sieve_dir I did review the official docs here: http://wiki2.dovecot.org/MailLocation/Maildir but I didn't find where it explicitly warns against setting home == maildir root. It should probably be apparent, but it wasn't to me when I first configured that setting. Thanks in advance for your help. If it turns out that the linode.com guide is wrong I'll create a Pull request to have that guide updated.

3 6

Re: dictionary attack defense
by Joseph Tam 23 Oct '14

23 Oct '14

Cliff Hayes writes: > a) I read about auth_failure_delay even before I posted my question and > I could not figure out the one-line explanation in the dovecot wiki: > "Number of seconds to delay before replying to failed authentications." > It's delaying a reply. Does that mean the hacker can keep asking as > fast as he wants? As Reindl states, authentication is a synchronous operation so the BFD attacker must wait for a reply before continuing. An attacker can get around this by running a botnet against you or opening up many concurrent connections (I think the latter can be capped), but I've rarely seen this. A botnet attack will defeat IP based blocking anyways. > Is it per user or per IP? Irrelevant -- there is no tracking. It's simply pauses the reply to bad auth attempts and tarpits the session. auth_failure_delay does not block BFD attacks, but makes it infeasable for reasonable strength passwords. It's simpler to implement, robust, and fault tolerant (e.g. a user cannot accidentally lock themselves out requiring administrative intervention to restore immediate access, or repeated failures from a NAT'd network does not DoS everything within the NAT'd network). Joseph Tam <jtam.home(a)gmail.com>

1 0

How to configure read-only access during a migration?
by Jeffrey Tunison 22 Oct '14

22 Oct '14

Hi. I would appreciate your advice about this PROBLEM: ======================================================= Find the simplest way to configure a Dovecot 2.2.10 IMAP server to access existing email users' (mbox-format) mail folders via a master_user ****in read-only mode.**** (I've got the master_user access working.) Simplest because while I'm proficient at UNIX systems administration, I'm under time pressure and dovecot has a lot of configuration flexibility. Identifying the right way to do this is proving time- consuming. Namespaces? ACL's? Passdb's? Mounting the mail-containing file systems in read-only mode did not work. (Would it have worked if I had disabled all file-locking rules (if so, how?)?) I thought it was time to bring in the dovecot wizards. You! GOAL: ======================================================= Without knowing or changing users' passwords, migrate several hundred users of dovecot IMAP to MS Exchange using the commercial product Transend. I'm manging the dovecot side, someone else is doing the Transend/Exchange piece. Migration would occur in batches due to slowness of the Transend side when dealing with users with email collections over a few gigabytes. I have a production IMAP server (dovecot 1.0.13 on 32-bit RHEL 4.9). Let's call it PROD for short. Users INBOXes are stored locally on PROD. Their other mail folders are stored on a second machine and accessed via NFS. Those other folders contain the great majority of the email to be migrated. Let's call the NFS server MIGR for short. On MIGR, I've set up a migration IMAP server (dovecot 2.2.10 on 64-bit RHEL 5.10). MIGR is a dedicated NFS server with newer hardware than PROD. It has an unused Ethernet NIC I can tell Transend to use. Both PROD and MIGR use NIS for authentication. Therefore PAM is consulted for passdb information, normally. No SQL db's used. I set up the second server (MIGR) for several reasons: 1) there are some users mail folders larger than the 32-bit file size limit found on the PROD server. 2) the bulk of the email is stored locally on the MIGR server. 3) the version of dovecot is much newer and therefore more likely to have fewer bugs and more configuration options. 4) I don't want to modify the production environment except where really necessary. Pointing Transend at MIGR instead of PROD seems like it will be faster and better. Telling end-users to use MIGR instead of PROD would allow them to verify that their email came across okay (into MS Exchange) without being able to modify the original copy of email (in Dovecot). In the days and weeks after migration. I'd like to disable access ***for a batch of users*** on the PROD server at the time the migration begins for that batch. I may need to re-enable access on PROD for certain users if the migration does not succeed. Transend has been dying on a number of test users despite tweaking its parameters in consultation with the vendor. "Corrupt" messages seem to be the issue. Users (or sysadmins) might be required to identify and delete the offending messages before we retry their migration. (Which folders and which messages are causing problems will hopefully be discernible in Transend logs.) Ha! If you've read this far, then I'd also say that I welcome any advice on changes to increase performance on MIGR, such as whether trying to minimize indexing as I've done is useful. Current configurations of the two servers follow. =========================================================================== PRODUCTION: =========================================================================== # 1.0.13: /etc/dovecot.conf log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot.log protocols: imaps imap listen: *:143 ssl_listen: *:993 ssl_cert_file: /etc/pki/dovecot/certs/dovecot.pem ssl_key_file: /etc/pki/dovecot/private/dovecot.key login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/imap-login login_processes_count: 20 login_max_processes_count: 500 max_mail_processes: 1524 first_valid_uid: 100 mail_location: mbox:~/Mail:INBOX=/var/mail/%u:INDEX=/var/spool/dovecot-indexes/%u/ mbox_read_locks: dotlock mbox_write_locks: dotlock mbox_dotlock_change_timeout: 60 mbox_min_index_size: 2048 namespace: type: private separator: / inbox: yes namespace: type: private separator: / prefix: Mail/ hidden: yes namespace: type: private separator: / prefix: ~/Mail/ hidden: yes namespace: type: private separator: / prefix: mail/ hidden: yes namespace: type: private separator: / prefix: ~/mail/ hidden: yes auth default: master_user_separator: * verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /etc/dovecot.deny deny: yes passdb: driver: passwd-file args: /etc/dovecot.transend master: yes passdb: driver: shadow passdb: driver: pam userdb: driver: passwd =========================================================================== MIGRATION: =========================================================================== # 2.2.10: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-348.18.1.el5 x86_64 Scientific Linux release 5.10 (Boron) auth_debug = yes auth_debug_passwords = yes auth_master_user_separator = * auth_verbose = yes auth_verbose_passwords = plain disable_plaintext_auth = no first_valid_uid = 100 log_path = /var/log/dovecot.log mail_debug = yes mail_location = mbox:~/Mail:INBOX=/var/spool/concmail/%u:INDEX=MEMORY mbox_min_index_size = 50048 B mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } namespace one { hidden = yes location = prefix = Mail/ separator = / } namespace three { hidden = yes location = prefix = mail/ separator = / } passdb { args = /etc/dovecot/deny-users deny = yes driver = passwd-file } passdb { args = /etc/dovecot/dovecot.transend driver = passwd-file master = yes } passdb { driver = pam } protocols = imap service imap-login { process_min_avail = 15 service_count = 10 } service imap { executable = imap postlogin process_limit = 2048 } service postlogin { executable = script-login -d rawlog } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } deny = yes driver = passwd-file } passdb { args = /etc/dovecot/dovecot.transend driver = passwd-file master = yes } passdb { driver = pam } protocols = imap service imap-login { process_min_avail = 15 service_count = 10 } service imap { executable = imap postlogin process_limit = 2048 } service postlogin { executable = script-login -d rawlog } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } verbose_proctitle = yes protocol imap { mail_max_userip_connections = 1000 }

1 0

dictionary attack defense
by Cliff Hayes 22 Oct '14

22 Oct '14

Does dovecot have any dictionary attack defenses yet? In the past I have had to implement defense from outside dovecot, but since dovecot is at the front lines and therefore is the first to know I'm hoping by now there is something we can set. For example, a limit on access failures per minut/hour/day or some such. If not why not?

4 8

authenticate plain, and virtual users
by Eric Abrahamsen 22 Oct '14

22 Oct '14

I'm running dovecot 2.2.14 on Archlinux. I've been using it with the isync syncing utility for quite some time with no problems, using the LOGIN authentication mechanism. Recently Isync was updated to support PLAIN, and I'm having trouble moving to that. The authenticate string that isync is sending is not the one that dovecot is expecting. I suspect this is because of how I have virtual users set up on my machine. This is a personal laptop, no other users, and so I didn't want to go through the rigmarole of creating more system users just for mail accounts. I also wanted everything stored under my home directory. So my dovecot config looks like this: # 2.2.14: /etc/dovecot/dovecot.conf # OS: Linux 3.16.4-1-ARCH i686 auth_verbose = yes disable_plaintext_auth = no info_log_path = /var/log/dovecot-info.log log_path = /var/log/dovecot.log mail_plugins = " fts fts_lucene" passdb { args = username_format=%u /etc/dovecot/passwd driver = passwd-file } plugin { fts = lucene fts_autoindex = yes fts_lucene = whitespace_chars=@. } protocols = imap ssl = no userdb { args = uid=eric gid=users home=/home/eric/.mail/%d/%n username_format=%u default_fields = mail=maildir:/home/eric/.mail/%d/%n/mail driver = static } My /etc/dovecot/passwd looks like this: eric@ericabrahamsen.net:{PLAIN}password1 eric@paper-republic.org:{PLAIN}password2 When isync tries to log into the local dovecot using PLAIN, it sends the base64-encoded version of this string: eric(a)paper-republic.org\0eric\0password2 With my current dovecot config, telnet experimentation shows that dovecot will accept either of these two: \0eric(a)paper-republic.org\0password2 eric@paper-republic.org\0eric@paper-republic.org\0password2 Ie, either with or without the authorization ID, just like it says at http://wiki2.dovecot.org/Debugging/Authentication Given that I'm unlikely to be able to change how isync sends the string (and that it's really doing the right thing), are there alterations I can make to my dovecot config to get it to accept the authenticate string that isync is sending? Ideally, can I do that without having to set up system users? I've already tried using the other fields in the passwd file, putting "eric" and "eric(a)paper-republic.org" into the UID fields, just in case. No dice. Thanks in advance for any advice! Eric

1 0

Multiple user attributes in LDAP userdb query strings
by BINOTTO Luis SIDOR 21 Oct '14

21 Oct '14

Hello list, I have an issue with dovecot and Ldap... Any help will be grateful... I have my virtual users stored in an Active Directory database. I am using 2 attributes in AD to locate the user account: mail (their primary email address) and proxyAddresses (a multivalue attribute containing their mail aliases). I also control the mount point in which the mail is located with another attribute in AD, in this case I used "pager". I have dovecot 1.2.15 and there are no immediate plans to upgrade it. I configured Dovecot's deliver process in order to integrate sieve capability. I have configured userdb ldap and passdb ldap in Dovecot and have set up master and client sockets. I am using maildir format for directory layout. The problem is to set the variables home and mail that will define the mail location. The format must be like this: home: /Mailboxes/<mount point>/<user login>/ mail: /Mailboxes/<mount point>/<user login>/Maildir So, for a particular user (Login: user1, smtp: user1(a)domain1.com, alias smtp: user1_alias(a)domain1.com) the variables will be: home: /Mailboxes/AdmUsers/user1/ mail: /Mailboxes/AdmUsers/user1/Maildir Active Directory has the values in: mail:(user1@domain1.com), proxyAddresses:(user1_alias@domain1.com), sAMAaccountName(user1). I have defined home and mail in dovecot-ldap.conf. # User attributes are given in LDAP-name=dovecot-internal-name list. The # internal names are: # uid - System UID # gid - System GID # home - Home directory # mail - Mail location # # There are also other special fields which can be returned, see # http://wiki.dovecot.org/UserDatabase/ExtraFields user_attrs = pager=home=/mailboxes/%$/%u,mobile=quota_rule=*:storage=%$M If the mail is sent to the Principal SMTP (user1(a)domain1.com) in which the user part (%u) is the same as sAMAccountName, it works. The variable home is set correctly (home: /Mailboxes/AdmUsers/user1/). The problem is when the mail is sent to the smtp alias, in which the variable home is set incorrectly (home: /Mailboxes/AdmUsers/user1_alias/). There is a way to set two values to user_attrs?, in this case I would need to set pager and sAMAccountName (instead of %u), to it. Thanking you in anticipation... Attached is the out of dovecot -n # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686 i686 Debian 6.0.7 log_path: /var/log/dovecot.log protocols: imap imaps pop3 pop3s disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_uid: 16343 mail_gid: 16343 mail_location: maildir:~/Maildir mail_debug: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): autocreate deleted_to_trash quota imap_quota expire mail_plugins(imap): autocreate deleted_to_trash quota imap_quota expire mail_plugins(pop3): quota expire mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh lda: postmaster_address: postmaster(a)domain1.com mail_plugins: quota expire log_path: /var/log/dovecot.log auth default: mechanisms: gssapi gss-spnego login ntlm plain username_format: %Ln use_winbind: yes passdb: driver: pam userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail plugin: autocreate: Deleted Items autocreate: Sent Items autosubscribe: Deleted Items autosubscribe: Sent Items deleted_to_trash_folder: Sent Items quota: maildir:User quota quota_rule: *:storage=100M quota_rule2: Deleted Items:ignore quota_warning: storage=80%% /etc/dovecot/scripts/quota-warning.sh 80 quota_warning2: storage=90%% /etc/dovecot/scripts/quota-warning.sh 90 quota_warning3: storage=99%% /etc/dovecot/scripts/quota-exceeded.sh 100 expire: "Deleted Items" 1 "Deleted Items/*" 1 expire_dict: proxy::expire dict: expire: pgsql:/etc/dovecot/dovecot-dict-expire.conf " Notificacion Automatica: Este mensaje y cualquier archivo que se adjunte contiene informacion privilegiada y confidencial. Es para uso exclusivo del destinatario. Si usted ha recibido esta comunicacion por error, por favor avisenos inmediatamente. Automatic notification: This e-mail and any file transmitted with it are confidential and may be legally privileged. It is intended solely for the addressee and may not be disclosed to or used by anyone other than the addressee. If you have received this e-mail by mistake , please advise the sender immediately"

1 0

Proxy problem: "imap-login: Error: proxy(USERNAME): connect(10.x.x.178, 993) failed: Cannot assign requested address (after 0 secs, local=10.x.x.104)"
by Ralf Hildebrandt 21 Oct '14

21 Oct '14

After fixing the "duplicate compression" problem, we're now encountering "imap-login: Error: proxy(USERNAME): connect(10.x.x.178, 993) failed: Cannot assign requested address (after 0 secs, local=10.x.x.100)" in the logs. We already tried raising the ulimit, the max number of open files. Once we reach about 25k connections, we're getting the error above... for all local addresses. It seems as if the system cannot create any more outgoing connections. We already optimized: ---- snip ---- net.ipv4.tcp_fin_timeout=5 # down from 30s net.ipv4.tcp_tw_reuse=1 net.ipv4.tcp_tw_recycle=1 # http://redis4you.com/articles.php?id=012&name=Redis+high+traffic+connection… net.ipv4.ip_local_port_range=10000 65000 # http://www.fromdual.com/huge-amount-of-time-wait-connections net.ipv4.netfilter.ip_conntrack_max=524288 ---- snip ---- But still we get (once the load is rising beyond some point): # fgrep "Cannot assign requested address" /var/log/dovecot/dovecot.log |awk '{print $NF}' | sort | uniq -c | sort -n 142 local=10.x.x.100) 147 local=10.x.x.107) 148 local=10.x.x.106) 151 local=10.x.x.104) 151 local=10.x.x.109) 152 local=10.x.x.105) 156 local=10.x.x.110) 162 local=10.x.x.102) 165 local=10.x.x.101) 178 local=10.x.x.103) 189 local=10.x.x.108) We're using multiple local addresses when proxying to the backends -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein

4 7

only inbox folder after courier-imap migration
by Luciano Gabriel Andino 21 Oct '14

21 Oct '14

Hello, after courier-dovecot-migrate.pl, the only folder appears in webmail menu is "Inbox". The others still are in Maildir "Maildir/.myfolder" and contains its "dovecot-uidlist" and "dovecot-keywords" files. May I need to edit some file? -- Saludos!! Luciano Andino GNU/Linux user #185103 Santa Fe - Argentina -----------------------------------------------

1 0

Dovecot Auth Issue
by Austin Einter 21 Oct '14

21 Oct '14

Dear All I have been able to setup postfix and dovecot. Through command line, I can send mail out. Now I have installed roundcube in mail server side, and I am able to access like https://mydomain/webmail.com Login was failing. Then I debugged and modified settings in dovecot and using PAM for authentication. Now I trying to login to email server. I am not sure if authentication by dovecot and pam is successful. I enabled logging for dovecot. The below logs I get when a user "try" logs in. Oct 21 07:44:55 auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Oct 21 07:44:55 auth: Debug: Module loaded: /usr/lib/dovecot/modules/auth/libdriver_mysql.so Oct 21 07:44:55 auth: Debug: auth client connected (pid=15357) Oct 21 07:44:55 auth: Debug: client in: AUTH 1 PLAIN service=imap secured lip=128.199.214.27 rip=128.199.214.27 lport=993 rport=43323 resp=AHRyeUBsb2FkbXVsdGlwbGllci5jb20AdHJ5MTIz Oct 21 07:44:55 auth-worker: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Oct 21 07:44:55 auth-worker: Debug: Module loaded: /usr/lib/dovecot/modules/auth/libdriver_mysql.so Oct 21 07:44:55 auth-worker: Debug: pam(try,128.199.214.27): lookup service=dovecot Oct 21 07:44:55 auth-worker: Debug: pam(try,128.199.214.27): #1/1 style=1 msg=Password: Oct 21 07:44:55 auth: Debug: client out: OK 1 user=try Oct 21 07:44:55 auth: Debug: master in: REQUEST 1571291137 15357 1 b3cc155dfd3bb2fd576bfeeceaf1ce3d Oct 21 07:44:55 auth: Debug: passwd(try,128.199.214.27): lookup *Oct 21 07:44:55 auth: Debug: master out: USER 1571291137 try home=/var/mail/ mail=maildir:/var/mail/try system_groups_user=try uid=5001 gid=5001*Oct 21 07:44:55 imap-login: Info: Login: user=<try>, method=PLAIN, rip=128.199.214.27, lip=128.199.214.27, mpid=15361, TLS *Oct 21 07:44:55 imap(try): Info: Disconnected: Logged out bytes=29/399* >From the logs above (in bold), I hope auth is successful, then in last line why it is logging out.., I am confused , not sure if auth is completely successful or not. Kindly experts please help. Best Regards, Austin

1 0

SMTP authentication setup
by Brian 21 Oct '14

21 Oct '14

At my company we've had a longstanding problem of not being able to send email from devices outside of our internal network and any specific IP address that we open the relay to. As it turns out, SASL has never been set up. I need to set up SASL ASAP but none of the guides I've found seem to work. This is the latest guide I tried: http://wiki2.dovecot.org/HowTo/PostfixAndDovecotSASL I did everything on here minus the last part because it's on the same server. Also, instead of submission inet n - - - - smtpd I did: 127.0.0.1:1025 inet n - - - - smtpd After all is done, however, I'm unable to send any mail. Thunderbird just says sending message but doesn't send and I don't even get an error. I end up having to disable SASL again before I can send mail. Dovecot version 2.0.9 Postfix version 2.6.6 CentOS 6 I have Postfix, Dovecot, and ASSP on the same server. Thanks everyone. -- This email was Virus checked by Astaro Security Gateway. http://www.sophos.com

4 5