- dovecot - dovecot.org

[Dovecot] IDLE dropping EXISTS events on mass message arrival
by Eric Wong 22 Jan '14

22 Jan '14

Hi, I'm not sure if this is some throttling/DoS protection or a bug. I didn't see notice anything like it mentioned looking at the NEWS file from hg, this is on 2.1.7 on Debian stable. I have a client doing IDLE on INBOX.vomiteer. When individual messages arrive with some time interval in between them, I get EXISTS events for each message as expected. However, when I store a bunch of messages at once (via tag + mass copy in mutt on a fast-ish connection), I get a few EXISTS events (sometimes one, sometimes two) even though I copied a lot of new messages over. I expected to get an EXISTS event for each message which arrived, but perhaps there's some sort of DoS/throttling mechanism. strace -t -s4096 output of the dovecot process below: fd=13 is inotify, you'll see large read(13, ... indicating multiple filenames from inotify. However, only one EXISTS message got written to the socket. I've filtered out the gettimeofday syscalls for brevity. 07:30:02 epoll_wait(9, {}, 6, 3937) = 0 07:30:06 stat64("/home/ew/.maildir/.INBOX.vomiteer/cur", {st_mode=S_IFDIR|0700, st_size=12288, ...}) = 0 07:30:06 stat64("/home/ew/.maildir/.INBOX.vomiteer/new", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0 07:30:06 stat64("/home/ew/.maildir/.INBOX.vomiteer/new", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0 07:30:06 stat64("/home/ew/.maildir/.INBOX.vomiteer/cur", {st_mode=S_IFDIR|0700, st_size=12288, ...}) = 0 07:30:06 stat64("/home/ew/.maildir/.INBOX.vomiteer/dovecot.index.log", {st_mode=S_IFREG|0600, st_size=25920, ...}) = 0 07:30:06 fstat64(10, {st_mode=S_IFREG|0600, st_size=25920, ...}) = 0 07:30:06 epoll_wait(9, {}, 6, 7865) = 0 07:30:14 setsockopt(11, SOL_TCP, TCP_CORK, [1], 4) = 0 07:30:14 write(11, "* OK Still here\r\n", 17) = 17 07:30:14 setsockopt(11, SOL_TCP, TCP_CORK, [0], 4) = 0 07:30:14 time(NULL) = 1390289414 07:30:14 epoll_wait(9, {{EPOLLIN, {u32=4159555408, u64=4159555408}}}, 6, 22124) = 1 07:30:17 read(13, "\2\0\0\0\200\0\0\0\t\365\r\0000\0\0\0001390289417.M94623P14841.dcvr,S=1580,W=1619:2,S\0\0\2\0\0\0\200\0\0\0\n\365\r\0000\0\0\0001390289417.M94624P14841.dcvr,S=1580,W=1619:2,S\0\0\2\0\0\0\200\0\0\0\v\365\r\0000\0\0\0001390289417.M94625P14841.dcvr,S=1422,W=1460:2,S\0\0\2\0\0\0\200\0\0\0\f\365\r\0000\0\0\0001390289417.M94626P14841.dcvr,S=1422,W=1460:2,S\0\0\2\0\0\0\200\0\0\0\r\365\r\0000\0\0\0001390289417.M94627P14841.dcvr,S=1861,W=1907:2,S\0\0\2\0\0\0\200\0\0\0\16\365\r\0000\0\0\0001390289417.M94628P14841.dcvr,S=1861,W=1907:2,S\0\0\2\0\0\0\200\0\0\0\17\365\r\0000\0\0\0001390289417.M94629P14841.dcvr,S=4732,W=4854:2,S\0\0\2\0\0\0\200\0\0\0\20\365\r\0000\0\0\0001390289417.M94630P14841.dcvr,S=4732,W=4854:2,S\0\0\2\0\0\0\200\0\0\0\21\365\r\0000\0\0\0001390289417.M94631P14841.dcvr,S=4028,W=4128:2,S\0\0\2\0\0\0\200\0\0\0\22\365\r\0000\0\0\0001390289417.M94632P14841.dcvr,S=4028,W=4128:2,S\0\0\2\0\0\0\200\0\0\0\23\365\r\0000\0\0\0001390289417.M94633P14841.dcvr,S=3865,W=3968:2,S\0\0\2\0\0\0\200\0\0\0\24\365\r\0000\0\0\0001390289417.M94634P14841.dcvr,S=3865,W=3968:2,S\0\0", 32768) = 768 07:30:17 epoll_wait(9, {{EPOLLIN, {u32=4159555408, u64=4159555408}}}, 6, 499) = 1 07:30:17 read(13, "\2\0\0\0\200\0\0\0\25\365\r\0000\0\0\0001390289417.M94635P14841.dcvr,S=4092,W=4189:2,S\0\0\2\0\0\0\200\0\0\0\26\365\r\0000\0\0\0001390289417.M94636P14841.dcvr,S=4092,W=4189:2,S\0\0\2\0\0\0\200\0\0\0\27\365\r\0000\0\0\0001390289417.M94637P14841.dcvr,S=1517,W=1552:2,S\0\0\2\0\0\0\200\0\0\0\30\365\r\0000\0\0\0001390289417.M94638P14841.dcvr,S=1517,W=1552:2,S\0\0", 32768) = 256 07:30:17 epoll_wait(9, {}, 6, 498) = 0 07:30:17 stat64("/home/ew/.maildir/.INBOX.vomiteer/new", {st_mode=S_IFDIR|0700, st_size=4096, ...}) = 0 07:30:17 stat64("/home/ew/.maildir/.INBOX.vomiteer/cur", {st_mode=S_IFDIR|0700, st_size=12288, ...}) = 0 07:30:17 stat64("/home/ew/.maildir/.INBOX.vomiteer/dovecot.index.log", {st_mode=S_IFREG|0600, st_size=26328, ...}) = 0 07:30:17 fstat64(10, {st_mode=S_IFREG|0600, st_size=26328, ...}) = 0 07:30:17 pread64(10, "\200\200\200\207@\0\0\20\0\0\0\0\0\0\0\0$\0\0\0\0\0\0\0\1\0\0\0\200\200\200\214\0\1\0\20\0\0$\0\337!\336R\344\231\2L\0\0\0\0\t\"\336R\t\"\336R\0\0\0\0\t\"\336R\0\0\0\0007\n\0\0\200\200\200\204 \0\0\20@\0\4\0\234e\0\0\200\200\200\242\2\0\0\20\317\0\0\0\10\0\0\0\320\0\0\0\10\0\0\0\321\0\0\0\10\0\0\0\322\0\0\0\10\0\0\0\323\0\0\0\10\0\0\0\324\0\0\0\10\0\0\0\325\0\0\0\10\0\0\0\326\0\0\0\10\0\0\0\327\0\0\0\10\0\0\0\330\0\0\0\10\0\0\0\331\0\0\0\10\0\0\0\332\0\0\0\10\0\0\0\333\0\0\0\10\0\0\0\334\0\0\0\10\0\0\0\335\0\0\0\10\0\0\0\336\0\0\0\10\0\0\0\200\200\200\207@\0\0\20\1\0\0\0\0\260\2L\0\0\0\0\4\0\4\0\1\0\0\0\200\200\200\242\0\2\0\20\317\0\0\0\250\275\0\0\320\0\0\0\234\277\0\0\321\0\0\0|\301\0\0\322\0\0\0|\304\0\0\323\0\0\0\200\307\0\0\324\0\0\0|\312\0\0\325\0\0\0h\315\0\0\326\0\0\0\\\320\0\0\327\0\0\0\224\323\0\0\330\0\0\0\210\325\0\0\331\0\0\0h\327\0\0\332\0\0\0h\332\0\0\333\0\0\0l\335\0\0\334\0\0\0h\340\0\0\335\0\0\0T\343\0\0\336\0\0\0H\346\0\0\200\200\200\204 \0\0\0200\0\4\0\337\0\0\0", 8192, 25920) = 408 07:30:17 pread64(10, "", 8192, 26328) = 0 07:30:17 stat64("/home/ew/.maildir/.INBOX.vomiteer/dovecot.index.log", {st_mode=S_IFREG|0600, st_size=26328, ...}) = 0 07:30:17 fstat64(10, {st_mode=S_IFREG|0600, st_size=26328, ...}) = 0 07:30:17 time(NULL) = 1390289417 07:30:17 setsockopt(11, SOL_TCP, TCP_CORK, [1], 4) = 0 07:30:17 write(11, "* 32 EXISTS\r\n", 13) = 13 07:30:17 setsockopt(11, SOL_TCP, TCP_CORK, [0], 4) = 0 07:30:17 epoll_wait(9, <unfinished ...> (Nothing happened after this) # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.9.2-x86_64-xxxxxx x86_64 Debian 7.3 auth_mechanisms = plain login log_timestamp = "%Y-%m-%d %H:%M:%S " mail_fsync = never mail_location = maildir:~/.maildir mail_max_userip_connections = 666 mail_privileged_group = mail passdb { driver = shadow } protocols = imap service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } user = root } service imap-login { inet_listener imap { address = 127.0.0.1 port = 1434 } process_limit = 10 process_min_avail = 1 } service imap { process_limit = 32 } service pop3-login { process_limit = 10 process_min_avail = 1 } service pop3 { process_limit = 32 } ssl = no userdb { driver = passwd } protocol lda { postmaster_address = postmaster(a)dcvr.yhbt.net } -- Eric Wong

2 1

[Dovecot] AD Kerberos and Dovecot
by Christian Felsing 22 Jan '14

22 Jan '14

Hello, I got stucked on Kerberos auth with Dovecot: Jan 22 17:48:36 test dovecot: auth: Error: LDAP: binding failed (dn cn=AUTH\_ldap): Local error, SASL(-1): generic failure: GSSAPI Error: Unspecified GSS failure. Minor code may provide more information (Credentials cache file '/tmp/krb5cc_1003' not found) kinit and and ldapsearch with gssapi auth are working. Are there instructions how to set up Kerberos auth with Dovecot and Active Directory? How does Dovecot handle Kerberos tickets? best regards Christian

1 0

[Dovecot] master password
by Marc Perkel 21 Jan '14

21 Jan '14

This is probably easy but how would a set a secret static master password so that if I typed it in for any login it would be happy? I can't use the * separator method in this case because it screws up squirrelmail.

2 1

[Dovecot] Shared mailboxes / IMAP folder performance
by Sebastian Schlatow 21 Jan '14

21 Jan '14

Hello, how performant is an IMAP shared folder / mailbox if it contains 2 million mails? Is it possible two have such a quantity of mails in a shared folder? Is it possible to search that shared folder for mails in a fast way? Regards Sebastian

2 3

[Dovecot] Failure in doveconf
by Andrew Ray 21 Jan '14

21 Jan '14

I ran into a problem while configuring dovecot. Quickly reading the paragraph below, I saw "yes" as one of the options, and put that into the config, as below: # In case of password mismatches, log the attempted password. Valid values are # no, plain and sha1. sha1 can be useful for detecting brute force password # attempts vs. user simply trying the same password over and over again. # You can also truncate the value to n chars by appending ":n" (e.g. sha1:6). auth_verbose_passwords = yes The result from doveconf -n was: doveconf: Error: x�η doveconf: Fatal: Error in configuration file /etc/dovecot/dovecot.conf: 0pη (where the error message was always a changing, apparently random set of characters.) So I managed, by going back through the config file and commenting out options, to find this was the problem and then finally read what are the acceptable values. Any other place that I have tried to give a non acceptable value I get a reasonable error message with line number and problem. Well, now I fixed my original problem, but something needs to be adjusted in the error handling code. Sincerely, Andrew Ray -- Andrew Ray +1 404-418-5443 +421 (0) 917 832 253 http://guns.freedomlives.net/

1 0

[Dovecot] forwarded message is broken in 2.2.10 with pigeonhole-0.4.2
by Burckhard Schmidt 21 Jan '14

21 Jan '14

Hi, forwarding a message with sieve like redirect:copy "me(a)other.domain"; was working without any problem until dovecot-2.1.17, dovecots lmtp and dovecot-2.1-pigeonhole-0.3.5. Using dovecot-2.2.10 , dovecots lmtp and dovecot-2.2-pigeonhole-0.4.2 the structure of a forwarded message is broken. Content of a message is not displayed or an attachment (for instance pdf) can not be opened by (different) clients. Writing a html mail or plain one makes no different. I have compared two messages and the main different is a missing Content-Type: multipart/alternative; boundary="...." to encapsulate the body of the forwarded message. Was it lost in sieve? Here parts of a "well" forwarded message: Return-Path: ... ... Received: by mails.cms.hu-berlin.de (Postfix, from userid 29) id A78C738734; Tue, 14 Jan 2014 17:10:54 +0100 (CET) X-Sieve: Pigeonhole Sieve 0.3.5 X-Sieve-Redirected-From: schmidt(a)mails.cms.hu-berlin.de Delivered-To: <schmidt(a)mails.cms.hu-berlin.de> Received: from mails.cms.hu-berlin.de by suncom1 (Dovecot) with LMTP id p8HoIn9h1VKnTwAA9XuJ/g for <schmidt(a)mails.cms.hu-berlin.de>; Tue, 14 Jan 2014 17:10:54 +0100 ... Message-ID: <52D5618D.6050905(a)gmail.com> Date: Tue, 14 Jan 2014 17:10:53 +0100 From: xy <xy(a)gmail.com> User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.2.0 MIME-Version: 1.0 To: schmidt(a)hu-berlin.de Subject: from gmail with attachment Content-Type: multipart/mixed; boundary="------------070108020005050001040207" X-ENVELOPE-TO: <me(a)other.domain> This is a multi-part message in MIME format. --------------070108020005050001040207 Content-Type: multipart/alternative; boundary="------------090806050202050708030507" --------------090806050202050708030507 Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 8bit Hallo. text --------------090806050202050708030507 Content-Type: text/html; charset=ISO-8859-15 Content-Transfer-Encoding: 8bit <html> <head> <meta http-equiv="content-type" content="text/html; charset=ISO-8859-15"> </head> <body text="#000000" bgcolor="#FFFFFF"> Hallo. text P. </body> </html> --------------090806050202050708030507-- --------------070108020005050001040207 Content-Type: application/pdf; name="auftrag-2014-eng-Hinweise.pdf" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="auftrag-2014-eng-Hinweise.pdf" JVBERi0xLjYNJeLjz9MNCjcyIDAgb2JqDTw ... ... c3RyZWFtDWVuZG9iag1zdGFydHhyZWYNCjExNg0KJSVFT0YNCg== --------------070108020005050001040207-- message end Now a broken message without "Content-Type: multipart/alternative;": Return-Path: ... ... Received: by mail5.cms.hu-berlin.de (Postfix, from userid 29) id 47C4C6D46E; Tue, 14 Jan 2014 17:43:54 +0100 (CET) X-Sieve: Pigeonhole Sieve 0.4.2 X-Sieve-Redirected-From: testuser(a)mail5.cms.hu-berlin.de Delivered-To: <testuser(a)mail5.cms.hu-berlin.de> Received: from mail5.cms.hu-berlin.de by suncom5 (Dovecot) with LMTP id mnY0AEpp1VLsaQAA0tuC1A for <testuser(a)mail4.cms.hu-berlin.de>; Tue, 14 Jan 2014 17:43:54 +0100 ... Message-ID: <52D56948.1090704(a)gmail.com> Date: Tue, 14 Jan 2014 17:43:52 +0100 From: xy <xy(a)gmail.com> User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.2.0 MIME-Version: 1.0 To: testuser(a)hu-berlin.de Subject: from gmail with attachment Content-Type: multipart/mixed; boundary="------------030506080302040201020604" X-ENVELOPE-TO: <me(a)other.domain> This is a multi-part message in MIME format. --------------030506080302040201020604 Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit text. --------------030506080302040201020604 Content-Type: application/pdf; name="auftrag-2014-eng-Hinweise.pdf" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="auftrag-2014-eng-Hinweise.pdf" JVBERi0xLjYNJeLjz... ... c3RyZWFtDWVuZG9iag1zdGFydHhyZWYNCjExNg0KJSVFT0YNCg== --------------030506080302040201020604-- message end -- Mit freundlichen Grüßen --- Burckhard Schmidt Abteilung Systemsoftware und Kommunikation ZE Computer- und Medienservice der Humboldt-Universität zu Berlin Postanschrift: Unter den Linden 6, 10099 Berlin Standort: Rudower Chaussee 26; 12489 Berlin Tel.: +49-30-2093-70058 Fax: +49-30-2093-2959 Mail: bschmidt(a)cms.hu-berlin.de

3 12

[Dovecot] Dovecot doesn't seem to report all subfolders to Thunderbird
by dovecot＠voidptr.de 21 Jan '14

21 Jan '14

Hi, I've recently migrated my emails from a Yahoo account to my own mailserver on a VPS. Ever since then, Thunderbird seems to have issues with the mailbox's directory structure: When I start Thunderbird, it immediately deletes the local copies of all 3rd-level folders (i.e. subfolders of a subfolder of a folder in the mailbox root). Since that didn't happen with the Yahoo account, I assume it's some kind of error or misconfiguration of Dovecot. Here's an example of the mailbox structure: voidptr.de '-> University '-> IEEE '-> Conference "University" and "IEEE" work without problems, but "Conference" gets deleted locally every time I start Thunderbird. When I collapse and re-expand "University" in the folder panel, all subfolders (including "Conference") reappear, but Thunderbird has to re-download the contents of "Conference", since it deleted the local copies earlier. It looks as if Dovecot only reported the topmost two folder levels when Thunderbird requests a folder list... Is there any way I can change that behavior? Nils $ doveconf -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-042stab078.22 x86_64 Debian 7.3 auth_verbose = yes mail_location = maildir:~/Maildir:LAYOUT=fs namespace { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = subscriptions = yes } passdb { args = scheme=SHA512-CRYPT username_format=%n /etc/dovecot/users driver = passwd-file } protocols = " imap" service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } } service imap-login { inet_listener imaps { port = 0 } } ssl = required ssl_cert = </etc/ssl/certs/own/voidptr.de.pem ssl_key = </etc/ssl/certs/own/voidptr.de.key userdb { args = username_format=%n /etc/dovecot/users default_fields = home=/home/%n driver = passwd-file }

3 4

[Dovecot] Sieve Filter based on Email Body
by Roman Gelfand 21 Jan '14

21 Jan '14

Is it possible to file emails based on the contents of email body? If yes, can you point me to an example. Thanks in advance

2 1

[Dovecot] A variable for the unix user or home path would be useful in some cases
by interfaSys sàrl 20 Jan '14

20 Jan '14

Hello, In our hosting environment, we let users share mailboxes across all their domains and think it's best if the shared mailbox listing (in a file) stays in their unix home path. That would be: /home/USER/imap/shared-mailboxes.db Unfortunately, it seems there is no way to generate that path using a variable. Something like this would be convenient: acl_shared_dict = file:%v/imap/shared-mailboxes.db Instead, we have to use something like this: acl_shared_dict = file:~/../../../shared-mailboxes.db which only works for virtual users. Did somebody solve this another way? Could we have the unix user or home path as a variable? Or could we have a modifier giving us the path or the unix user based on the unix UID? Cheers, Olivier

1 0

Re: [Dovecot] imap abort after upgrade from 2.2.4 to 2.2.7
by morrison 20 Jan '14

20 Jan '14

When I did upgrade, 2.2.7 was the latest release. When I ran into the problem, I checked back and found 2.2.8 and 2.2.9 were released shortly one after another. It seemed these releases were sort of buggy. I would like to know if what I described in my previous email was an known issue and was addressed before upgrade to 2.2.10. We are using dovecot as our internal mail service. So stable is most important to us. Regards,

1 0

[Dovecot] mail check
by Paolo 20 Jan '14

20 Jan '14

Is there some simple script that parsing the dovecot.info.log can give me a list of the mail checks for a user (better if reports also the type (POP/IMAP), and result of the sessions (Ok/Fail/Error/...))? Regards, Paolo

2 2

[Dovecot] auth_default_realm, pam_krb5, gssapi
by Sergey Urushkin 20 Jan '14

20 Jan '14

Hi, Just writing here my note about auth_default_realm, pam_krb5 and gssapi. It seems that 'pam' passdb and 'gssapi' auth_mechanism doesn't honor 'auth_default_realm' setting, at least in several setups I deal with. Here is a part of the config: passdb { args = max_requests=100 cache_key=%u%r dovecot driver = pam } auth_default_realm = REALM.COM auth_mechanisms = plain login apop gssapi auth_username_format = %Uu The problem is that pam_krb5 strips default realm from username (by default), even if auth_default_realm is specified and even if user logs in as 'user1(a)realm.com' (with domain part). A part of auth.log: mail auth: pam_krb5(dovecot:auth): user USER1 authenticated as USER1(a)REALM.COM The same for GSSAPI auth, if specified authorization name doesn't contain domain part. A part of mail.log: mail dovecot: imap-login: Login: user=<USER1>, method=GSSAPI, rip=172.16.0.1, lip=192.168.1.1, mpid=5828, TLS, session=<bpzvRmDwPACsFwCX> For several reasons I do need username inside dovecot to contain domain part. So, I found a solution to this problem - modifying /etc/krb5.conf this way: [libdefaults] default_realm = REALM.COM [realms] REALM.COM = { auth_to_local = RULE:[1:$1@$0] } This will add realm part to the local username despite using default realm. Maybe it's better to put this example to the wiki? Tested with ubuntu 12.04 and dovecot 2.2.10, mit kerberos 1.10, amd64. Taking the opportunity, I'd like to ask, is there a way to make usernames case insensitive while using GSSAPI. The case: klist shows: Principal: user1(a)REALM.COM username in thunderbird 'uSer1(a)REALM.COM'. Dovecot gives me this message (I use auth_username_format=%Uu for pam_krb5 to be able to login with lowercase realm): dovecot: auth: gssapi(USER1(a)REALM.COM,172.16.0.1,<IIgwMGbw3ACsFgA4>): User not authorized to log in as USER1(a)REALM.COM As I know kerberos usernames are case insensitive (user part), at least kinit and windows against AD works that way. Seems that k5credentials passdb extra field will not help here too. Does anyone have an idea? Thanks. -- Best regards, Sergey Urushkin

1 0

[Dovecot] New document on troubleshooting Dovecot IMAP
by Steve Litt 19 Jan '14

19 Jan '14

Hi all, Check out my new document on troubleshooting Dovecot IMAP: http://www.troubleshooters.com/emailtech/imap_troubleshooting.htm Thank you to all those, on this mailing list and on the #dovecot IRC channel, for helping me with this. Thanks, SteveT Steve Litt * http://www.troubleshooters.com/ Troubleshooting Training * Human Performance

2 1

[Dovecot] Shared Folters with LDA/Sieve
by Dieter Knopf 19 Jan '14

19 Jan '14

Hello, i'm searching for a way to use Shared mailboxes with Sieve Filtering. I need global email addresses like: info(a)foo.tld contact(a)foo.tld help(a)foo.tld Every address with own Sieve-rules for filtering and sorting of incoming mails. Now every user needs access to this folders, but how? How should i create the "global" addresses? I already found http://wiki2.dovecot.org/SharedMailboxes/Public , but that's just a public namespace. Is there any FAQ available for this? Thank you very much Dieter

4 4

[Dovecot] Dovecot - not pulling pop3s email from virtual mbox
by Ganesh Hariharan 18 Jan '14

18 Jan '14

Hi All, I am bit strugging to get this work, and bit perplexed to set the right configuration to get this work, btw: I am using passdb without any DB based auth. the latest logs after debug mode setting is below Jan 16 09:27:04 ns dovecot: auth: Debug: Module loaded: /usr/lib/dovecot/auth/libdriver_sqlite.so Jan 16 09:27:04 ns dovecot: auth: Debug: Module loaded: /usr/lib/dovecot/auth/libmech_gssapi.so Jan 16 09:27:04 ns dovecot: auth: Error: passwd-file /etc/dovecot/users: User info(a)ghhdomain.com has invalid GID '/var/spool/mail/ghhdomain/info/' Jan 16 09:27:04 ns dovecot: auth: Debug: passwd-file /etc/dovecot/users: Read 0 users Jan 16 09:27:04 ns dovecot: auth: Fatal: No passdbs specified in configuration file. CRAM-MD5 mechanism needs one Jan 16 09:27:04 ns dovecot: master: Error: service(auth): command startup failed, throttling Please see my configs 10-mail.conf mail_location = maildir:/var/spool/mail/%d/%n 10-ssl.conf # SSL/TLS support: yes, no, required. <doc/wiki/SSL.txt> ssl = yes ssl_cert = </etc/postfix/newcert.pem ssl_key = </etc/postfix/newkey.pem auth-system.conf.ext #passdb { #driver = passwd-file #args = scheme=cram-md5 username_format=%u /etc/dovecot/passwd #} userdb { driver = passwd-file args = username_format=%u /etc/dovecot/users } auth-passwdfile.conf.ext passdb { driver = passwd-file args = scheme=CRYPT username_format=%u /etc/dovecot/users } users file look like this info(a)ghhdomain.com: {CRAM-MD5}e02d374fde0dc75a17a557039a3a5338c7743304777dccd376f332bee68d2cf6:503:503 I created using doveadm pw , and pasted the output to the above file Please let me know what went wrong, and what I need to do now... thanks G. userdb { driver = passwd-file args = username_format=%u /etc/dovecot/users I have made a mess of these configuration after many tries.. yet not sure what is the simple steps to make it work

2 7

[Dovecot] Sizing MTA servers
by Murray Trainer 17 Jan '14

17 Jan '14

Hi All, This is probably a bit off-topic but does anyone have any idea about sizing MTA servers. We have about 200,000 emails/hr incoming and outgoing. I am intending using Exim and Spamassassin on each MTA. How many servers using recent hardware would I need to cope with this mail throughput? What is more important on the servers, CPU or RAM? Should I have mail going both directions on each server or dedicate a pair each for incoming and outgoing mail> Thanks for any feedback. Murray

5 5

[Dovecot] doveconf base_dir
by Andreas Schulze 17 Jan '14

17 Jan '14

Hello, today I run the command "doveadm auth cache flush" for the first time. # doveadm auth cache flush doveadm(root): Error: userdb lookup: connect(/var/run/dovecotauth-master) failed: No such file or directory 0 cache entries flushed # base_dir was the only item contain 'run' and it did not end with a / So I tried to set base_dir to /var/run/dovecot/ and could now rerun "doveadm auth cache flush" without problems. I compile dovecot from source and found --with-rundir=/var/run/dovecot as an option to configure. I changed to /var/run/dovecot/, recompile and removed the base_dir setting in dovecot.conf again. Now "doveadm auth cache flush" work out of the box. doveconf -d base_dir is var/run/dovecot/. Finaly I compiled dovecot with --localstatedir=/var and removed --with-rundir from configure. The resulting package had again base_dir = /var/run/dovecot so "doveadm auth cache flush" don't work. looks like somewhere the missing / should be added in case base_dir has no trailing / without special configuration. Andreas

1 0

[Dovecot] imap abort after upgrade from 2.2.4 to 2.2.7
by morrison 17 Jan '14

17 Jan '14

Hi, I used to use dovecot 2.2.4. I saw lots of warnings saying 'Extension header update points outside header size'. I upgraded to dovecot 2.2.7, based on the discussion in mail list. Now, I see lots of imap aborts around: src/lib-index/mail-index-transaction-export.c:203: i_assert(u32.offset + u32.size <= ext_hdr_size); I also noticed, in some mailbox, imap process kept abort until all index files in the mailbox were manually deleted. Did someone run into the same problem and any solution to this? Thanks,

4 4

[Dovecot] Dovecot IMAP proxy for gmail IMAP server
by CM Reddy 17 Jan '14

17 Jan '14

Hi All, I am experimenting to use Dovecot as an IMAP proxy to GMAIL server. I would like configure my localhost as an Dovecot IMAP proxy and trying to access my GMAIL using the Thunderbird email client. Please share the steps to configure and access my mails from GMAIL server. - Thanks CM Reddy

2 1

[Dovecot] Use dovecot for enterprise
by ♥ NiNJA ♂ 17 Jan '14

17 Jan '14

Hi guys I like to know is it possible to create Unlimited number of email accounts with Unlimited Storage in each email ? Does anybody do it ? Does dovecot good enough for having more than millions of users ? Thanks :-)

3 2

[Dovecot] Changing user specific configs one at a time using userdb text file to override defaults...
by Charles Marcus 17 Jan '14

17 Jan '14

Hi all, Ok, I'm now interested in testing converting users one at a time to mdbox+SIS, but want to make sure I understand how to do this. It appears the best way - for smaller installations at least - is to just use a simple text file userdb to override the defaults, then once all of the users have been converted, change the defaults and remove the userdb txt file overrides. So, would love to hear details from others who have done something like this. Thx! -- Best regards, Charles

1 0

[Dovecot] Getting more out of the %w variable.
by Julian PG 17 Jan '14

17 Jan '14

Hello Dovecot community, I have a backend database application that handles all system wide user authentication (from web to mail and more). Passwords are not stored in plain text. So I would like to support more than PLAIN. Perhaps at least CRAM-MD5 or DIGEST-MD5 for example. Even though connections over TLS are encouraged (and even enforced). Some MUA and users still think its a better idea than PLAIN (even sent over an encrypted session). I have a vague memory of getting some warnings with thunderbird in regards to the use of PLAIN. Of course the %w variable would have to include the challenge as well as the response. Or perhaps even a seperate variable for the challenge? Or course at the moment the %w variable is an empty string for anything other than PLAIN. This would make some users and MUAs happy (even though pointless over TLS - I agree). Your thoughts would be appreciated. Regards, Julian. -- Not time for sigs!

2 1

[Dovecot] Received: header showing 127.0.0.1 after switch to dovecot LDA?
by Charles Marcus 16 Jan '14

16 Jan '14

Hi all, I'm guessing this is correct behavior, but wanted to make sure... I noticed that for locally delivered messages (between 2 local users inside our domain, so they never leave the server), the first Received: header line content changed after I switched to the dovecot LDA. Before, using postfix/virtual for delivery, the header looked like this: Received: from [192.168.1.25] (client.example.com [192.168.1.25]) by smtp.example.com (Postfix) with ESMTPSA id 67E33A20542; Wed, 6 Jun 2012 10:55:55 -0400 (EDT) But now it looks like this: Received: from [127.0.0.1] (client.example.com.com [192.168.1.14]) by smtp.example.com (Postfix) with ESMTPSA id 4EEF7802AF325 for <me(a)example.com>; Wed, 15 Jan 2014 18:29:17 -0500 (EST) so, 2 questions... 1. Why does it show 127.0.0.1 instead of the client IP, and 2. Why did postfix/virtual include the "for <me(a)example.com>;" but the dovecot LDA doesn't? Thanks, -- Best regards, Charles

2 1

[Dovecot] Replication file sizes
by IT geek 31 16 Jan '14

16 Jan '14

Hi, I'm using Dovecot 2.2.9 to replicate my mailbox to a remote server. My mailbox on ServerA is 235Mb, but on ServerB it ends up being 358Mb. Does anyone know why this is? Shouldn't they be the same size? doveconf -n from ServerA: # 2.2.9: /usr/pkg/etc/dovecot/dovecot.conf # OS: NetBSD 5.2 cobalt auth_mechanisms = plain login doveadm_password = secret doveadm_port = 12345 first_valid_uid = 1003 last_valid_uid = 1020 listen = 192.168.1.1 mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_plugins = " notify replication" passdb { driver = passwd } plugin { mail_replica = tcp:serverb.test.com } protocols = imap service aggregator { fifo_listener replication-notify-fifo { mode = 0666 } unix_listener replication-notify { mode = 0600 } } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } user = root } service doveadm { inet_listener { port = 12345 } } service imap-login { inet_listener imap { port = 0 } } service replicator { process_min_avail = 1 unix_listener replicator-doveadm { mode = 0600 } } ssl_cert = </etc/openssl/certs/servera.test.com.crt ssl_key = </etc/openssl/private/serverb.test.com.key userdb { driver = passwd } protocol lda { postmaster_address = postmaster(a)test.com

1 0

[Dovecot] Dovecot 2 separate login for POP3 connections ?
by BONNET, Frank 16 Jan '14

16 Jan '14

Hello Is it possible to configure a separate logfile for incoming POP3 connections ( dovecot 2.2.9 ) thanks

3 3

[Dovecot] mail-filter always results in corrupted indexes
by martijn.list 16 Jan '14

16 Jan '14

Hi, I'm experimenting with the mail-filter plugin but whenever I add anything to a message, it always results in an corrupted cache: from the logs: Dec 14 16:09:55 ciphermail-webmail dovecot: imap(martijn=djigzo.com(a)ciphermail.private): Error: Corrupted index cache file /var/vmail/martijn=djigzo.com(a)ciphermail.private/dovecot.index.cache: Broken physical size for mail UID 76 Dec 14 16:09:55 ciphermail-webmail dovecot: imap(martijn=djigzo.com(a)ciphermail.private): Error: read() failed: Invalid argument Dec 14 16:10:02 ciphermail-webmail dovecot: imap(martijn=djigzo.com(a)ciphermail.private): Error: Cached message size smaller than expected (773 < 777) Dec 14 16:10:02 ciphermail-webmail dovecot: imap(martijn=djigzo.com(a)ciphermail.private): Error: Maildir filename has wrong S value, renamed the file from /var/vmail/martijn=djigzo.com@ciphermail.private/cur/1387033802.M114583P9631.ciphermail-webmail,S=773,W=791:2, t A do-nothing filter that just sends the input to the output works but whenever I add something trivial to the message, the cache is always corrupted. I using Dovecot 2.2.9.1 (from the deb archives). I use the following trivial test to add some XXX chars and and later remove them. In mail-filter.sh I append some chars and in mail-filter-out I filter these chars out (this is just a test) cat > /tmp/dovecot-in.txt echo "XXX" >> /tmp/dovecot-in.txt cat /tmp/dovecot-in.txt mail-filter-out: cat > /tmp/dovecot-out.txt sed -i /XXX/d /tmp/dovecot-out.txt cat /tmp/dovecot-out.txt Any idea what I'm doing wrong? Kind regards, Martijn Brinkers

5 6

Re: [Dovecot] Couldn't drop privileges
by Joseph Tam 16 Jan '14

16 Jan '14

From: CM Reddy <cmreddy(a)armor5.com> > userdb { > args = username_format=%u /etc/dovecot/users > driver = passwd-file > } > ... > Log information: > ... > Jan 13 16:42:44 cmreddy-Lenovo-G500s dovecot: imap(armor5): Error: user > armor5: Couldn't drop privileges: User is missing GID (see mail_gid setting) Fairly self-explanatory, isn't it? It appears your userdb does not specify GID for a user. Either define it, or ... In share/doc/dovecot/example-config/conf.d/10-mail.conf: # System user and group used to access mails. If you use multiple, userdb # can override these by returning uid or gid fields. You can use either numbers # or names. <doc/wiki/UserIds.txt> #mail_uid = ... if all your users share the the same GID, set it here. Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] [Dovecot auth crash]
by Jeremy SPIESSER 16 Jan '14

16 Jan '14

Hi, I have a problem with dovecot auth and i don't know what happen .. running dovecot 2.1.7 When i try a login with user there is a crash in auth process: Jan 16 02:56:52 az-mail14 dovecot: auth: Panic: file auth-request.c: line 618 (auth_request_is_disabled_master_user): assertion failed: (request->requested_login_user != NULL) Jan 16 02:56:52 az-mail14 dovecot: auth: Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x4414a) [0x7fcc4b30d14a] -> /usr/lib/dovecot/libdovecot.so.0(+0x4418e) [0x7fcc4b30d18e] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7fcc4b2e482a] -> dovecot/auth(+0x14af2) [0x7fcc4b78eaf2] -> dovecot/auth(auth_request_verify_plain+0x22) [0x7fcc4b790102] -> dovecot/auth(+0x1da10) [0x7fcc4b797a10] -> dovecot/auth(auth_request_handler_auth_continue+0xe2) [0x7fcc4b791cf2] -> dovecot/auth(+0x10420) [0x7fcc4b78a420] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x7fcc4b31a016] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0xa7) [0x7fcc4b31acc7] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7fcc4b319a28] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7fcc4b306483] -> dovecot/auth(main+0x323) [0x7fcc4b788863] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7fcc4a70cead] -> dovecot/auth(+0xea75) [0x7fcc4b788a75] Jan 16 02:56:52 az-mail14 dovecot: auth: Fatal: master: service(auth): child 28622 killed with signal 6 (core dumps disabled) Jan 16 02:56:52 az-mail14 dovecot: imap-login: Warning: Auth connection closed with 1 pending requests (max 0 secs, pid=28621, EOF) Jan 16 02:56:53 az-mail14 dovecot: auth: Panic: file auth-request.c: line 618 (auth_request_is_disabled_master_user): assertion failed: (request->requested_login_user != NULL) Jan 16 02:56:53 az-mail14 dovecot: auth: Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x4414a) [0x7f262370d14a] -> /usr/lib/dovecot/libdovecot.so.0(+0x4418e) [0x7f262370d18e] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f26236e482a] -> dovecot/auth(+0x14af2) [0x7f2623b8eaf2] -> dovecot/auth(auth_request_verify_plain+0x22) [0x7f2623b90102] -> dovecot/auth(+0x1da10) [0x7f2623b97a10] -> dovecot/auth(+0x127f3) [0x7f2623b8c7f3] -> /usr/lib/dovecot/libdovecot.so.0(+0x390e5) [0x7f26237020e5] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x7f262371a016] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0xa7) [0x7f262371acc7] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f2623719a28] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f2623706483] -> dovecot/auth(main+0x323) [0x7f2623b88863] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7f2622b0cead] -> dovecot/auth(+0xea75) [0x7f2623b88a75] Jan 16 02:56:53 az-mail14 dovecot: auth: Fatal: master: service(auth): child 28632 killed with signal 6 (core dumps disabled) Jan 16 02:56:53 az-mail14 dovecot: imap-login: Warning: Auth connection closed with 1 pending requests (max 0 secs, pid=28621, EOF) Jan 16 02:57:13 az-mail14 dovecot: imap-login: Disconnected (auth process communication failure): user=<>, method=PLAIN, rip=172.16.21.3, lip=172.16.21.100, TLS, session=<yDZIvQzwogCsEBUD> Dovecot run with this config file: # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.3 ext4 auth_anonymous_username = anonymous auth_cache_negative_ttl = 1 hours auth_cache_size = 0 auth_cache_ttl = 1 hours auth_debug = no auth_debug_passwords = no auth_default_realm = auth_failure_delay = 2 secs auth_first_valid_uid = 500 auth_gssapi_hostname = auth_krb5_keytab = auth_last_valid_uid = 0 auth_master_user_separator = auth_mechanisms = plain auth_proxy_self = auth_realms = auth_socket_path = auth-userdb auth_ssl_require_client_cert = no auth_ssl_username_from_cert = no auth_use_winbind = no auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ auth_username_format = %Lu auth_username_translation = auth_verbose = no auth_verbose_passwords = no auth_winbind_helper_path = /usr/bin/ntlm_auth auth_worker_max_count = 30 base_dir = /var/run/dovecot config_cache_size = 1 M debug_log_path = default_client_limit = 10000 default_idle_kill = 1 mins default_internal_user = dovecot default_login_user = dovenull default_process_limit = 1000 default_vsz_limit = 1 G deliver_log_format = msgid=%m: %$ dict_db_config = director_doveadm_port = 0 director_mail_servers = director_servers = director_user_expire = 15 mins director_username_hash = %u disable_plaintext_auth = yes dotlock_use_excl = no doveadm_allowed_commands = doveadm_password = doveadm_proxy_port = 0 doveadm_socket_path = doveadm-server doveadm_worker_count = 0 dsync_alt_char = _ dsync_remote_cmd = ssh -l%{login} %{host} doveadm dsync-server -u%u -l%{lock_timeout} -n%{namespace} first_valid_gid = 1 first_valid_uid = 500 hostname = imap_capability = imap_client_workarounds = imap_id_log = imap_id_send = imap_idle_notify_interval = 2 mins imap_logout_format = in=%i out=%o imap_max_line_length = 64 k imapc_features = imapc_host = imapc_list_prefix = imapc_master_user = imapc_password = imapc_port = 143 imapc_rawlog_dir = imapc_ssl = no imapc_ssl_ca_dir = imapc_ssl_verify = yes imapc_user = %u import_environment = TZ info_log_path = instance_name = dovecot last_valid_gid = 0 last_valid_uid = 0 lda_mailbox_autocreate = no lda_mailbox_autosubscribe = no lda_original_recipient_header = libexec_dir = /usr/lib/dovecot listen = *, :: lmtp_proxy = no lmtp_save_to_detail_mailbox = no lock_method = fcntl log_path = syslog log_timestamp = "%b %d %H:%M:%S " login_access_sockets = login_greeting = Dovecot ready. login_log_format = %$: %s login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c session=<%{session}> login_trusted_networks = mail_access_groups = mail_attachment_dir = mail_attachment_fs = sis posix mail_attachment_hash = %{sha1} mail_attachment_min_size = 128 k mail_cache_fields = flags mail_cache_min_mail_count = 10 mail_chroot = mail_debug = no mail_fsync = optimized mail_full_filesystem_access = no mail_gid = mail_home = mail_location = maildir:/data/vmail/%d/%n/Maildir:INDEX=/dev/shm/dovindex/%u mail_log_prefix = "%s(%u): " mail_max_keyword_length = 50 mail_max_lock_timeout = 0 mail_max_userip_connections = 10 mail_never_cache_fields = imap.envelope mail_nfs_index = no mail_nfs_storage = no mail_plugin_dir = /usr/lib/dovecot/modules mail_plugins = mail_prefetch_count = 100 mail_privileged_group = mail_save_crlf = no mail_shared_explicit_inbox = yes mail_temp_dir = /tmp mail_temp_scan_interval = 1 weeks mail_uid = mailbox_idle_check_interval = 30 secs mailbox_list_index = no maildir_broken_filename_sizes = no maildir_copy_with_hardlinks = yes maildir_stat_dirs = no maildir_very_dirty_syncs = no managesieve_client_workarounds = managesieve_implementation_string = Dovecot Pigeonhole managesieve_logout_format = bytes=%i/%o managesieve_max_compile_errors = 5 managesieve_max_line_length = 65536 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave master_user_separator = mbox_dirty_syncs = yes mbox_dotlock_change_timeout = 2 mins mbox_lazy_writes = yes mbox_lock_timeout = 5 mins mbox_md5 = apop3d mbox_min_index_size = 0 mbox_read_locks = fcntl mbox_very_dirty_syncs = no mbox_write_locks = dotlock fcntl mdbox_preallocate_space = no mdbox_rotate_interval = 0 mdbox_rotate_size = 2 M mmap_disable = yes passdb { args = /data/vmail/conf/dovecot_shadow default_fields = deny = no driver = passwd-file master = yes override_fields = pass = no } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } pop3_client_workarounds = pop3_enable_last = no pop3_fast_size_lookups = no pop3_lock_session = no pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_no_flag_updates = no pop3_reuse_xuidl = no pop3_save_uidl = no pop3_uidl_duplicates = allow pop3_uidl_format = %08Xu%08Xv pop3c_host = pop3c_password = pop3c_port = 110 pop3c_rawlog_dir = pop3c_ssl = no pop3c_ssl_ca_dir = pop3c_ssl_verify = yes pop3c_user = %u postmaster_address = protocols = quota_full_tempfail = no recipient_delimiter = + rejection_reason = Your message to <%t> was automatically rejected:%n%r rejection_subject = Rejected: %s replication_full_sync_interval = 12 hours replication_max_conns = 10 replicator_host = replicator replicator_port = 0 sendmail_path = /usr/sbin/sendmail service aggregator { chroot = . client_limit = 0 drop_priv_before_exec = no executable = aggregator extra_groups = fifo_listener replication-notify-fifo { group = mode = 0600 user = } group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener replication-notify { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service anvil { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = anvil extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 1 protocol = service_count = 0 type = anvil unix_listener anvil-auth-penalty { group = mode = 0600 user = } unix_listener anvil { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service auth-worker { chroot = client_limit = 1 drop_priv_before_exec = no executable = auth -w extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener auth-worker { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 18446744073709551615 B } service auth { chroot = client_limit = 0 drop_priv_before_exec = no executable = auth extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener auth-client { group = mode = 0600 user = } unix_listener auth-login { group = mode = 0600 user = $default_internal_user } unix_listener auth-master { group = mode = 0600 user = } unix_listener auth-userdb { group = mode = 0666 user = $default_internal_user } unix_listener login/login { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service config { chroot = client_limit = 0 drop_priv_before_exec = no executable = config extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = config unix_listener config { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service dict { chroot = client_limit = 1 drop_priv_before_exec = no executable = dict extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dict { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service director { chroot = . client_limit = 0 drop_priv_before_exec = no executable = director extra_groups = fifo_listener login/proxy-notify { group = mode = 00 user = } group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener director-admin { group = mode = 0600 user = } unix_listener login/director { group = mode = 00 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service dns_client { chroot = client_limit = 1 drop_priv_before_exec = no executable = dns-client extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dns-client { group = mode = 0666 user = } unix_listener login/dns-client { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service doveadm { chroot = client_limit = 1 drop_priv_before_exec = no executable = doveadm-server extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener doveadm-server { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service imap-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = imap-login extra_groups = group = idle_kill = 0 inet_listener imap { address = port = 143 ssl = no } inet_listener imaps { address = port = 993 ssl = yes } privileged_group = process_limit = 0 process_min_avail = 0 protocol = imap service_count = 1 type = login user = $default_login_user vsz_limit = 18446744073709551615 B } service imap { chroot = client_limit = 1 drop_priv_before_exec = no executable = imap extra_groups = group = idle_kill = 0 privileged_group = process_limit = 4096 process_min_avail = 0 protocol = imap service_count = 1 type = unix_listener login/imap { group = mode = 0666 user = } user = vsz_limit = 1 G } service indexer-worker { chroot = client_limit = 1 drop_priv_before_exec = no executable = indexer-worker extra_groups = group = idle_kill = 0 privileged_group = process_limit = 10 process_min_avail = 0 protocol = service_count = 0 type = unix_listener indexer-worker { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 18446744073709551615 B } service indexer { chroot = client_limit = 0 drop_priv_before_exec = no executable = indexer extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener indexer { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service ipc { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = ipc extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener ipc { group = mode = 0600 user = } unix_listener login/ipc-proxy { group = mode = 0600 user = $default_login_user } user = $default_internal_user vsz_limit = 18446744073709551615 B } service lmtp { chroot = client_limit = 1 drop_priv_before_exec = no executable = lmtp extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = lmtp service_count = 0 type = unix_listener lmtp { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service log { chroot = client_limit = 0 drop_priv_before_exec = no executable = log extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = log unix_listener log-errors { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service managesieve-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = managesieve-login extra_groups = group = idle_kill = 0 inet_listener sieve { address = port = 4190 ssl = no } inet_listener sieve_deprecated { address = port = 2000 ssl = no } privileged_group = process_limit = 0 process_min_avail = 0 protocol = sieve service_count = 1 type = login user = $default_login_user vsz_limit = 18446744073709551615 B } service managesieve { chroot = client_limit = 1 drop_priv_before_exec = no executable = managesieve extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = sieve service_count = 1 type = unix_listener login/sieve { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service pop3-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = pop3-login extra_groups = group = idle_kill = 0 inet_listener pop3 { address = port = 110 ssl = no } inet_listener pop3s { address = port = 995 ssl = yes } privileged_group = process_limit = 0 process_min_avail = 0 protocol = pop3 service_count = 1 type = login user = $default_login_user vsz_limit = 18446744073709551615 B } service pop3 { chroot = client_limit = 1 drop_priv_before_exec = no executable = pop3 extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = pop3 service_count = 1 type = unix_listener login/pop3 { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service replicator { chroot = client_limit = 0 drop_priv_before_exec = no executable = replicator extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener replicator { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 18446744073709551615 B } service ssl-params { chroot = client_limit = 0 drop_priv_before_exec = no executable = ssl-params extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = startup unix_listener login/ssl-params { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service stats { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = stats extra_groups = fifo_listener stats-mail { group = mode = 0600 user = } group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener stats { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } shutdown_clients = yes ssl = yes ssl_ca = </etc/ssl/gandi.pem ssl_cert = </etc/ssl/cert-azuria.net.crt ssl_cert_username_field = commonName ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL ssl_client_cert = ssl_client_key = ssl_crypto_device = ssl_key = </etc/ssl/azuria.key ssl_key_password = ssl_parameters_regenerate = 1 weeks ssl_protocols = !SSLv2 ssl_require_crl = yes ssl_verify_client_cert = no stats_command_min_time = 1 mins stats_domain_min_time = 12 hours stats_ip_min_time = 12 hours stats_memory_limit = 16 M stats_session_min_time = 15 mins stats_user_min_time = 1 hours submission_host = syslog_facility = mail userdb { args = uid=1003 gid=1003 home=/data/vmail/%d/%n/Maildir default_fields = driver = static override_fields = } valid_chroot_dirs = verbose_proctitle = no verbose_ssl = no version_ignore = no protocol imap { imap_idle_notify_interval = 2 mins imap_max_line_length = 1 M mail_max_userip_connections = 10000 } protocol pop3 { pop3_enable_last = yes pop3_fast_size_lookups = no pop3_uidl_format = %08Xu%08Xv } protocol lda { auth_socket_path = /var/run/dovecot/auth-userdb log_path = /data/vmail/log/dovecot-deliver.log mail_plugins = cmusieve quota postmaster_address = postmaster(a)azuria.net } I try to find answers on forums and the internet but I found nothing. Can you help me with this problem? Thanks you! -- -- *Jeremy SPIESSER * 34 bd des Italiens 75009 Paris *tel:*01 44 54 30 00 *mob:*06 22 12 81 75 *fax:*01 70 24 83 67 www.azuria.net <http://www.azuria.net/> prefix et peering <https://lg.azuria.net/>

1 0

[Dovecot] EAGAIN in dict proxy
by Richard Platel 15 Jan '14

15 Jan '14

Hello, We’re using a custom program to manage quotas talking to dovecot via the dovecot dict proxy protocol over a unix socket: plugin { quota = dict:User quota::proxy:/var/run/auth_proxy_dovecot/quotasocket:quota } Dovecot gets slammed with quota requests periodically, seemingly because Thunderbird thought it would be a good idea to hardcode having a quota check at 45 seconds past the minute, and thus every Thunderbird client makes several GETQUOTAROOT requests simultaneously. This causes dovecot to make many client connections to the quota proxy, and many of them fail with EAGAIN. In the log we see: Jan 15 16:52:46 imap25 dovecot: imap(rplatel(a)tucows.com): Error: net_connect_unix(/var/run/auth_proxy_dovecot/quotasocket) failed: Resource temporarily unavailable And the client gets: * QUOTAROOT Spam "User quota"[0d][0a] * QUOTA "User quota" ()[0d][0a] * BAD Internal quota calculation error[0d][0a] 19 OK Getquotaroot completed.[0d][0a] Thunderbird transparently disconnects and reconnects at this point but obviously this is not ideal. Writing some toy programs, I found that even making a forked server with several processes doing nothing but accept()ing on the listening socket, with a high number for the listen queue, it’s easy to overwhelm it with simultaneous clients who then get EAGAIN. If the clients do indeed immediately try again, they are successful. (An INET listening socket does not seem to have this problem, incidentally) All of this is a long-winded way of saying that I believe in lib-dict/dict-client.c:client_dict_connect() the call to net_connect_unix should be a call to net_connect_unix_with_retries() with a small timeout. It would also be useful for us if an INET socket could be used.

1 0

[Dovecot] int/ext mailserver
by Mr.Pine 15 Jan '14

15 Jan '14

I 'm using potfix-dovcote as an internal mail server(local.myco.com) and wan to run another potfix-dovcote as an external mail server (myco.com) on Internet.75% of my users should only work internally(no external mail) but the rest of users (25%)should be able to send mail to external network! These users have the same username on myco.com. I use smtp_generic_maps to map int username of these users to ext. one. For eg. All email send by test(a)local.myco.com map to test(a)myco.com. So anyone got these mails can reply them. I know that getmail is the tools that can get mails from users external mailbox and put them into int. mailbox. 1. I have a root access to ext mail server. But do not know my ext user password!. How can I use getmail to move ext mail to internal one?! 2. What is your idea about syncing users password in internal/external mail server?! I think its needed for getmail! 3. How can I restrict my internal users to send mail only internally!? I appreciated any help!! TNX

2 1

[Dovecot] restored mails
by Wojciech Giel 15 Jan '14

15 Jan '14

Hello, I am running dovecot 2.1 on debian wheezy . We are using maildir format. one of our uses deleted content of INBOX folder during xmass. he wants these messages back. I had these mail on tape. I have restored them to his inbox/cur directory but dovecot is not indexing them. Email client shows empty inbox as well. tried manually run: doveadm index -u john -q INBOX no change. deleting indexes didn't help. How to restore these email? thanks Woj my config: # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.3 auth_debug = yes auth_mechanisms = plain login cram-md5 auth_verbose = yes listen = * log_path = /var/log/dovecot.log log_timestamp = "%Y-%m-%d %H:%M:%S " login_greeting = IMAP Server is ready. mail_debug = yes mail_location = maildir:~/Maildir:INDEX=~/dovecot-control/indexes:CONTROL=~/dovecot-control:LAYOUT=fs mail_plugins = " quota trash" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { driver = pam } passdb { args = scheme=cram-md5 /etc/dovecot/passwd driver = passwd-file } plugin { antispam_backend = pipe antispam_debug_target = syslog antispam_mail_sendmail = /usr/bin/sa-learn-pipe.sh antispam_pipe_program_notspam_arg = --ham antispam_pipe_program_spam_arg = --spam antispam_pipe_tmpdir = /tmp antispam_spam = Junk;Spam antispam_trash_pattern = Trash;Deleted * antispam_verbose_debug = 0 autocreate = INBOX autocreate2 = Sent autocreate3 = Trash autocreate4 = Drafts autocreate5 = Junk autosubscribe = INBOX autosubscribe2 = Sent autosubscribe3 = Trash autosubscribe4 = Drafts autosubscribe5 = Junk quota = maildir:User quota quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u quota_warning3 = -storage=100%% quota-warning below %u sieve = ~/.dovecot.sieve sieve_default = /var/spool/dovecot/default.sieve sieve_dir = ~/sieve sieve_global_dir = /var/spool/dovecot/ trash = /etc/dovecot/dovecot-trash.conf.ext } protocols = imap sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-master { mode = 0666 } } service managesieve-login { inet_listener sieve { port = 2000 } } service quota-warning { executable = script /usr/bin/dovecot-quota-warning.sh user = postfix } ssl_ca = </etc/postfix/ssl/cacert.pem ssl_cert = </etc/postfix/ssl/servercrt.pem ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP-ADH-DES-CBC-SHA:!EXP-EDH-RSA-DES-CBC-SHA:!EXP-DES-CBC-SHA:!EXP-RC2-CBC-MD5:!EXP-RC4-MD5:!EXP-ADH-RC4-MD5:!ADH-DES-CBC3-SHA:!ADH-RC4-MD5:!ADH-DES-CBC3-SHA:!ADH-AES128-SHA:!ADH-AES256-SHA:!ADH-RC4-MD5:!RC4 ssl_key = </etc/postfix/ssl/serverkey.pem userdb { args = /etc/dovecot/passwd driver = passwd-file } userdb { driver = passwd } protocol lda { deliver_log_format = msgid=%m: %$ info_log_path = /var/log/dovecot-deliver.log log_path = /var/log/dovecot-deliver.log mail_plugins = " quota trash autocreate sieve" postmaster_address = postmaster quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep delay-newmail tb-lsub-flags mail_max_userip_connections = 10 mail_plugins = " quota trash imap_quota autocreate antispam" } 1379333576.M520387P21423.pine,S=5016,W=5183:2,S 1389710739.M139355P6177.pine,S=38933,W=39648:2,Sd 1379340386.M670300P24951.pine,S=2282,W=2328:2,S 1389710937.M15977P6316.pine,S=20426,W=20831:2,Sd 1379342173.M207466P25909.pine,S=2649,W=2700:2,S 1389715067.M350398P8795.pine,S=18288,W=18549:2,Sd 1379343332.M808399P26628.pine,S=3862,W=3952:2,S 1389715305.M250290P8929.pine,S=4264,W=4346:2,Sd 1379343742.M248785P27359.pine,S=4772,W=4891:2,RS 1389723554.M26883P13831.pine,S=47655,W=47979:2,d 1379343783.M47728P27388.pine,S=22571,W=23053:2,S root@pine:/home/john/Maildir/INBOX/cur#

3 3

[Dovecot] Why does dovecot require the {} password sheme even if there is a $ crypt scheme.
by da-dovecotlist-15＠abelonline.de 15 Jan '14

15 Jan '14

The wiki[1] says: If all the passwords are in same format, you can use default_pass_scheme to specify it. Otherwise each password needs to be prefixed with "{password-scheme}", for example "{plain}plaintext-password". Why doesn't dovecot recognize the crypt scheme identifier ($1$ for MD5-CRYPT, $6$ for SHA512-CRYPT etc.)? At the moment I have to have the following in my db for dovecot to work: {SHA512-CRYPT}$6$salt$passwordhash [1]http://wiki2.dovecot.org/AuthDatabase/SQL

2 2

[Dovecot] Proxying to MS Exchange 2013
by Matheus Fontes 15 Jan '14

15 Jan '14

Hi All, I'm new in dovecot list but I already read a thread with same problem: http://www.dovecot.org/list/dovecot/2013-June/091017.html If I try to proxy imap to exchange i got timeout on proxy connection. Someone solved this problem? thanks Matheus Fontes

1 0

[Dovecot] Thanks for the help
by Steve Litt 15 Jan '14

15 Jan '14

Hi all, I'd like to thank the people on #dovecot, especially jaybe, for helping me fix my Dovecot after a reinstall broke it. Thanks, SteveT Steve Litt * http://www.troubleshooters.com/ Troubleshooting Training * Human Performance

1 0

[Dovecot] dsync mbox to maildir migration does not delete, deleted e-mails
by A M 15 Jan '14

15 Jan '14

Hello, I am planning to migrate all users from mbox to maildir. I am trying to do it with minimum downtime. (~100GB data) All users are currently using POP3. Dovecot version is 2.2.10 (latest). Command used is: dsync -u username mirror maildir:~/Maildir Process I plan is: (omitting steps related to sendmail / procmail) 1) keep dovecot running (with mail_location as mbox) 2) dsync for all users (this may take 3-4 hours or more) 3) (downtime starts) stop dovecot and sendmail (to stop new e-mails) 4) block pop3, imap ports on firewall (so users can not connect) 5) start dovecot (still with mbox) 6) dsync again to sync e-mails arrived between step 2 and 3 7) dsync again (just to make sure!) 8) (downtime ends) restart dovecot (with mail_location as maildir) Now, here is my problem. Lets say there is user joe, who has 50 NEW e-mails in mbox (INBOX). Step 2 perfectly syncs his 50 e-mails to 'new' folder of maildir. Now in the mean time, before step 3, he connected via POP3 and downloaded and deleted 50 e-mails. Now when we reach step 6 (re-sync), what I expected was dsync will detect that 50 e-mails are deleted and it will delete 50 e-mails from 'new' directory of maildir. But that is not happening. 50 e-mails are still there. I fear that these e-mails will be re-downloaded on his Outlook once I switch dovecot to maildir. This will happen for each and every user which will cause huge mess. So how to tell, dsync to delete non-existent e-mails which are no more there in mbox (INBOX)? Thanks in advance, Regards, A M

1 1

[Dovecot] Dovecot service not responding after about a week of uptime
by Matthieu 15 Jan '14

15 Jan '14

Hello, I am running a dovecot 2.1.13 server and lately it stops responding after about a week of uptime. Simply restarting the dovecot service solves the issue. I tried to look a bit in my maillog file but did not find anything obvious. During the time when the server is not responding I can still see imap-login entries from the connection attempt by my email client. Any help about how to diagnose the problem would be appreciated. Thanks, Matthieu

5 13

[Dovecot] panic!
by LuKreme 14 Jan '14

14 Jan '14

(I will not make a joke about the streets of Carlyle) Jan 13 19:09:07 mail dovecot: lda(john(a)example.com): Panic: file mail-transaction-log-file.c: line 1148 (mail_transaction_log_file_get_highest_modseq_at): assertion failed: (offset <= file->sync_offset) Jan 13 19:09:08 mail kernel: pid 8435 (dovecot-lda), uid 89: exited on signal 6 (core dumped) Jan 13 19:14:16 mail dovecot: lda(john(a)example.com): Panic: file mail-transaction-log-file.c: line 1148 (mail_transaction_log_file_get_highest_modseq_at): assertion failed: (offset <= file->sync_offset) Jan 13 19:14:16 mail kernel: pid 9648 (dovecot-lda), uid 89: exited on signal 6 (core dumped) Just the one user, seems to happen every time he checks mail. I am not using LDA at all. $ doveconf -n # 2.2.5: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 9.1-RELEASE i386 auth_mechanisms = PLAIN LOGIN disable_plaintext_auth = no first_valid_uid = 89 login_log_format_elements = user=<%u> %r %m %c mail_location = maildir:~/Maildir mail_max_userip_connections = 90 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox NotJunk { auto = subscribe } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocols = imap sieve service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } } service imap-login { inet_listener imaps { port = 993 ssl = yes } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } userdb { args = /etc/dovecot/dovecot-sql.conf.ext default_fields = uid=vpopmail gid=vchkpw mail_location=/usr/local/virtual/%u mail=maildir:/usr/local/virtual/%u driver = sql } -- How soon after the U.S. Postal Service issues the Calvin stamp will you send a letter with one on the envelope? Watterson: Immediately. I'm going to get in my horse and buggy and snail-mail a check for my newspaper subscription.

1 1

[Dovecot] Fatal: master: service(lmtp): child n killed with signal 11 (core dumped) - in mail_cache_header_fields_read
by Maciej Uhlig 14 Jan '14

14 Jan '14

This is log from dovecot 2.1.17 (I had to downgrade from 2.2.10 because lot of problems) on CentOS 6.5: 2014-01-14T18:36:03+01:00 server/a.b.c.d dovecot: lmtp(5927): Fatal: master: service(lmtp): child 5927 killed with signal 11 (core dumped) # uname -a Linux server 2.6.32-431.1.2.0.1.el6.x86_64 #1 SMP Fri Dec 13 13:06:13 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux (gdb) bt full #0 0x00007fb14b9b3bb5 in mail_cache_header_fields_read () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #1 0x00007fb14b9b19aa in mail_cache_open_and_verify () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #2 0x00007fb14b9b35bd in mail_cache_register_get_list () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #3 0x00007fb14b9a11a7 in index_mail_parse_header_init () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #4 0x00007fb14b9a1ff8 in index_mail_cache_parse_init () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #5 0x00007fb14b94c982 in maildir_save_add () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #6 0x00007fb14b94ccd8 in maildir_save_begin () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #7 0x00007fb14b031b23 in quota_save_begin () from /usr/local/dovecot/lib/dovecot/lib10_quota_plugin.so ---Type <return> to continue, or q <return> to quit--- No symbol table info available. #8 0x00007fb14b982552 in mailbox_save_begin () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #9 0x00007fb14b97ae8f in mail_storage_copy () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #10 0x00007fb14b948ef6 in maildir_copy () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #11 0x00007fb14ae25551 in notify_copy () from /usr/local/dovecot/lib/dovecot/lib15_notify_plugin.so No symbol table info available. #12 0x00007fb14b031907 in quota_copy () from /usr/local/dovecot/lib/dovecot/lib10_quota_plugin.so No symbol table info available. #13 0x00007fb14b9824aa in mailbox_copy () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #14 0x00007fb14a9d7dc6 in act_store_execute () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot-sieve.so.0 No symbol table info available. #15 0x00007fb14a9ce0f4 in _sieve_result_implicit_keep () ---Type <return> to continue, or q <return> to quit--- from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot-sieve.so.0 No symbol table info available. #16 0x00007fb14a9cfe27 in sieve_result_execute () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot-sieve.so.0 No symbol table info available. #17 0x00007fb14a9df918 in sieve_multiscript_run () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot-sieve.so.0 No symbol table info available. #18 0x00007fb14ac2189e in lda_sieve_deliver_mail () from /usr/local/dovecot/lib/dovecot/lib90_sieve_plugin.so No symbol table info available. #19 0x00007fb14bc1d305 in mail_deliver () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot-lda.so.0 No symbol table info available. #20 0x00000000004054c3 in client_input_data_handle () No symbol table info available. #21 0x00007fb14b6ba146 in io_loop_call_io () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot.so.0 No symbol table info available. #22 0x00007fb14b6bb46d in io_loop_handler_run () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot.so.0 No symbol table info available. #23 0x00007fb14b6ba0e8 in io_loop_run () ---Type <return> to continue, or q <return> to quit--- from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot.so.0 No symbol table info available. #24 0x00007fb14b6a4043 in master_service_run () from /usr/local/dovecot-2.1.17/lib/dovecot/libdovecot.so.0 No symbol table info available. #25 0x0000000000404096 in main () No symbol table info available. (gdb) MU

1 0

[Dovecot] Dovecot LMTP does not pass envelope recipient +detail to sieve
by Greg Rivers 14 Jan '14

14 Jan '14

I found this[1] thread that describes the same problem with dovecot-LDA, but the solution (add X-Original-To: header) has no effect with LMTP. My sendmail LMTP configuration: FEATURE(`local_lmtp',`[IPC]',`FILE /var/run/dovecot/lmtp') Sendmail's address test indicates that sendmail is providing user+detail to LMTP (see below). Except for this problem, dovecot, LMTP, and sieve are all working perfectly. Is there something I'm missing, or is this a bug? [1] http://dovecot.org/pipermail/dovecot/2012-July/136987.htm Script started on Sun Jan 5 23:25:04 2014 $ doveconf -n # 2.2.9: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 9.2-STABLE amd64 auth_verbose = yes mail_debug = yes mail_location = mdbox:~/.mdbox mail_plugins = " quota" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave editheader vnd.dovecot.debug vnd.dovecot.duplicate imapflags notify vnd.dovecot.pipe vnd.dovecot.filter vnd.dovecot.execute namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = %s driver = pam } plugin { quota = fs:%n@%{hostname} %h %Us %{pid}: quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_execute_bin_dir = ~/sieve/sieve-execute sieve_execute_socket_dir = sieve-execute sieve_extensions = +notify +imapflags +editheader +vnd.dovecot.duplicate +vnd.dovecot.pipe +vnd.dovecot.filter +vnd.dovecot.execute +vnd.dovecot.debug sieve_filter_bin_dir = ~/sieve/sieve-filter sieve_filter_socket_dir = sieve-filter sieve_global_dir = /usr/local/etc/dovecot/sieve sieve_max_actions = 0 sieve_max_redirects = 16 sieve_max_script_size = 0 sieve_pipe_bin_dir = ~/sieve/sieve-pipe sieve_pipe_socket_dir = sieve-pipe sieve_plugins = sieve_extprograms } postmaster_address = postmaster(a)tharned.org protocols = imap lmtp sieve quota_full_tempfail = yes service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = dovecot } user = dovecot } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } verbose_proctitle = yes protocol lmtp { mail_plugins = " quota sieve" } protocol lda { mail_plugins = " quota sieve" } protocol imap { mail_max_userip_connections = 100 mail_plugins = " quota imap_quota" } $ sendmail -bt ADDRESS TEST MODE (ruleset 3 NOT automatically invoked) Enter <ruleset> <address> > =M mailer 0 (prog): P=/bin/sh S=EnvFromL/HdrFromL R=EnvToL/HdrToL M=0 U=-1:-1 F=9DFMeloqsu L=0 E=\n T=X-Unix/X-Unix/X-Unix r=100 A=sh -c $u mailer 1 (*file*): P=[FILE] S=parse/parse R=parse/parse M=0 U=-1:-1 F=9DEFMPloqsu L=0 E=\n T=X-Unix/X-Unix/X-Unix r=100 A=FILE $u mailer 2 (*include*): P=/dev/null S=parse/parse R=parse/parse M=0 U=-1:-1 F=su L=0 E=\n T=<undefined>/<undefined>/<undefined> r=100 A=INCLUDE $u mailer 3 (local): P=[IPC] S=EnvFromSMTP/HdrFromL R=EnvToL/HdrToL M=0 U=-1:-1 F=/59:@ADFMPSXlmnqswz| L=0 E=\r\n T=DNS/RFC822/SMTP r=100 A=FILE /var/run/dovecot/lmtp mailer 4 (smtp): P=[IPC] S=EnvFromSMTP/HdrFromSMTP R=EnvToSMTP/EnvToSMTP M=0 U=-1:-1 F=DFMXmu L=990 E=\r\n T=DNS/RFC822/SMTP r=100 A=TCP $h mailer 5 (esmtp): P=[IPC] S=EnvFromSMTP/HdrFromSMTP R=EnvToSMTP/EnvToSMTP M=0 U=-1:-1 F=DFMXamu L=990 E=\r\n T=DNS/RFC822/SMTP r=100 A=TCP $h mailer 6 (smtp8): P=[IPC] S=EnvFromSMTP/HdrFromSMTP R=EnvToSMTP/EnvToSMTP M=0 U=-1:-1 F=8DFMXmu L=990 E=\r\n T=DNS/RFC822/SMTP r=100 A=TCP $h mailer 7 (dsmtp): P=[IPC] S=EnvFromSMTP/HdrFromSMTP R=EnvToSMTP/EnvToSMTP M=0 U=-1:-1 F=%DFMXamu L=990 E=\r\n T=DNS/RFC822/SMTP r=100 A=TCP $h mailer 8 (relay): P=[IPC] S=EnvFromSMTP/HdrFromSMTP R=MasqSMTP/MasqSMTP M=0 U=-1:-1 F=8DFMXamu L=2040 E=\r\n T=DNS/RFC822/SMTP r=100 A=TCP $h > /try local gcr+DeTaIl(a)tharned.org Trying envelope recipient address gcr+DeTaIl(a)tharned.org for mailer local canonify input: gcr + DeTaIl @ tharned . org Canonify2 input: gcr + DeTaIl < @ tharned . org > Canonify2 returns: gcr + DeTaIl < @ tharned . org . > canonify returns: gcr + DeTaIl < @ tharned . org . > 2 input: gcr + DeTaIl < @ tharned . org . > 2 returns: gcr + DeTaIl < @ tharned . org . > EnvToL input: gcr + DeTaIl < @ tharned . org . > EnvToL returns: gcr + DeTaIl final input: gcr + DeTaIl final returns: gcr + DeTaIl Rcode = 0, addr = gcr+DeTaIl > ^D $ cat .dovecot.sieve require ["envelope", "subaddress", "variables", "vnd.dovecot.debug"]; if envelope :matches "to" "*" { set "to" "${1}"; } if envelope :user :matches "to" "*" { set "user" "${1}"; } if envelope :detail :matches "to" "*" { set "detail" "${1}"; } if envelope :matches "from" "*" { set "from" "${1}"; } debug_log "EnvelopeTo=${to}, EnvelopeFrom=${from}"; debug_log "EnvelopeToUser=${user}, EnvelopeToDetail=${detail}"; $ telnet localhost smtp Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 tharned.org ESMTP Sendmail 8.14.7/8.14.7; Sun, 5 Jan 2014 23:56:22 -0600 (CST) mail from:<gcr(a)tharned.org> 250 2.1.0 <gcr(a)tharned.org>... Sender ok rcpt to:<gcr+DeTaIl(a)tharned.org> 250 2.1.5 <gcr+DeTaIl(a)tharned.org>... Recipient ok data 354 Enter mail, end with "." on a line by itself . 250 2.0.0 s065uMYM069381 Message accepted for delivery quit 221 2.0.0 tharned.org closing connection Connection closed by foreign host. $ tail -4 .dovecot.sieve.log sieve: info: started log at Jan 05 23:57:21. main script: line 5: info: DEBUG: EnvelopeTo=gcr, EnvelopeFrom=gcr(a)tharned.org. main script: line 9: info: DEBUG: EnvelopeToUser=gcr, EnvelopeToDetail=. info: msgid=<201401060557.s065uMYM069381(a)tharned.org>: stored mail into mailbox 'INBOX'. $ exit Script done on Sun Jan 5 23:57:55 2014 -- Greg Rivers

6 15

[Dovecot] Sieve - not functioning for additional email aliases.
by Jacek Osiecki 14 Jan '14

14 Jan '14

Hi, On one of my servers (old one, version 1.2.5) user reported that vacation message for basic address works fine, but not for the aliases. I know that this is an old version, but we can't simply switch them to the most current dovecot release without preparing and testing everything... So I'm rather asking for help with debugging the case :) This person has email my.name(a)olddomain.pl. However, they are switching to new domain - newdomain.pl - and it is becoming their main brand. So temporarily olddomain.pl is still their "home" domain, but there is a domain alias newdomain->olddomain. The sieve file is simple: forward message and reply with vacation: ---- require ["copy","vacation"]; # rule:[redirect] if anyof (true) { redirect :copy "my.boss(a)newdomain.pl"; vacation :days 1 :addresses ["my.name(a)olddomain.pl","my.name(a)newdomain.pl"] text: I'm unavailable now. Please contact my boss: my.boss(a)newdomain.pl Greetings . ; } ---- When I send email to my.name(a)olddomain.pl - it is sent to my.boss(a)newdomain.pl and I receive the vacation message. When I send it to the alias (my.name(a)newdomain.pl) - none of above is done. Any idea how I can debug it? Running test-sieve does not help - it claims that will simply forward and deliver the message... Greetings, -- Jacek Osiecki joshua(a)ceti.pl GG:3828944 I don't want something I need. I want something I want.

3 2

[Dovecot] dict ldap
by me＠electronico.nc 14 Jan '14

14 Jan '14

Hello everybody, Dovecot 2.2.6 with LDAP auth against AD (Samba4). I would like to know if it's possible to specify an LDAP transport for dict (something like dovecot-dict-ldap.conf.ext). I'm in need to setup shared mailboxes and if I could query LDAP, that would help a lot. IE : user1 user2 user3 are in OU=group1, so group1 (setup as user in AD) would share its mailbox with user1 user2 and user3. Thanks in advance for your time. Nicolas

1 0

[Dovecot] Couldn't drop privileges
by CM Reddy 13 Jan '14

13 Jan '14

Hi All, I have configured the dovecot from sources based on the instructions in the following link. http://wiki2.dovecot.org/CompilingSource Tried to test the installation: 1. Started dovecot successfully. 2. Failed to Login command with an error. -Lenovo-G500s:~$ telnet localhost 143 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Hi Dovecot ready. a login armor5 abc123 * BYE Internal error occurred. Refer to server log for more information. Connection closed by foreign host. Configuration is: ------------------------ Lenovo-G500s:~$ doveconf -n # 2.2.10: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 3.8.0-29-generic x86_64 Ubuntu 12.04.3 LTS auth_debug = yes auth_verbose = yes base_dir = /var/run/dovecot/ disable_plaintext_auth = no login_greeting = Hi Dovecot ready. mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_privileged_group = mail namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = scheme=CRYPT username_format=%u /etc/dovecot/users driver = passwd-file } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } Log information: ---------------------- Jan 13 16:42:34 cmreddy-Lenovo-G500s dovecot: auth: Debug: auth client connected (pid=5166) Jan 13 16:42:44 cmreddy-Lenovo-G500s dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=imap#011secured#011session=+CqxJ9jvkgB/AAAB#011lip=127.0.0.1#011rip=127.0.0.1#011lport=143#011rport=33682#011resp=<hidden> Jan 13 16:42:44 cmreddy-Lenovo-G500s dovecot: auth: Debug: passwd-file(armor5,127.0.0.1,<+CqxJ9jvkgB/AAAB>): lookup: user=armor5 file=/etc/dovecot/users Jan 13 16:42:44 cmreddy-Lenovo-G500s dovecot: auth: Debug: client passdb out: OK#0111#011user=armor5 Jan 13 16:42:44 cmreddy-Lenovo-G500s dovecot: auth: Debug: master in: REQUEST#0111108344833#0115166#0111#011d026da1fc2ca16d0208eec7bc369ac2d#011session_pid=5169#011request_auth_token Jan 13 16:42:44 cmreddy-Lenovo-G500s dovecot: auth: Debug: passwd-file(armor5,127.0.0.1,<+CqxJ9jvkgB/AAAB>): lookup: user=armor5 file=/etc/dovecot/users Jan 13 16:42:44 cmreddy-Lenovo-G500s dovecot: auth: Debug: master userdb out: USER#0111108344833#011armor5#011uid=1001#011home=/home/armor5#011auth_token=555c47f35a67f94f519da93affe91abef29550fb Jan 13 16:42:44 cmreddy-Lenovo-G500s dovecot: imap-login: Login: user=<armor5>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=5169, secured, session=<+CqxJ9jvkgB/AAAB> Jan 13 16:42:44 cmreddy-Lenovo-G500s dovecot: imap(armor5): Error: user armor5: Couldn't drop privileges: User is missing GID (see mail_gid setting) Jan 13 16:42:44 cmreddy-Lenovo-G500s dovecot: imap(armor5): Error: Internal error occurred. Refer to server log for more information. Please help in resolving this issue. - Thanks CM Reddy

2 1

[Dovecot] Slow authentication performance when switching folder
by ra＠rz.uni-frankfurt.de 13 Jan '14

13 Jan '14

Hello, we have a problem with Dovecot 2.2.9 running on an AIX 7.1 and compiled with xlc. At first we configured passdb to use our ldap directory via pam and experienced an Internal login failure like the following one Jan 13 16:20:02 imap-login: Info: Internal login failure (pid=29818948 id=1) (internal failure, 1 successful auths): user=<user>, method=PLAIN, rip=xxx.xxx.xxx.xxx, lip=yyy.yyy.yyy.yyy, TLS, session=<r/P1m9vv5ACNAv6j> I read that this error occurs if the last passdb returns a continue and there is no other passdb to ask. We added two more passdb to rule out that pam is the problem. We added ldap directly and as third a fallback passwd file, but we still get the Internal login failure. As far as i can see this only occurs if i switch to another folder and i´m being reauthenticated. Are there any suggestions on what is going wrong? Any push in the right direction would be appreciated. kind regards Manuel PS: This is the dump of our dovecot configuration file: doveconf: Warning: service auth { client_limit=1000 } is lower than required under max. load (32768) doveconf: Warning: service anvil { client_limit=1000 } is lower than required under max. load (24579) # OS: AIX 1 00F7B83D4C00 auth_debug = yes auth_mechanisms = plain login auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890- auth_username_format = %n auth_username_translation = AaBbCcDdEeFfGgHhIiJjKkLlMmNnOoPpQqRrSsTtUuVvWwXxYyZz auth_verbose = yes base_dir = /var/run/dovecot-imap default_process_limit = 8192 disable_plaintext_auth = no first_valid_uid = 100 info_log_path = /mailbase/dovecot/2.2.9/log/dovecot_imap_debug.log log_path = /mailbase/dovecot/2.2.9/log/dovecot_imap.log login_greeting = University-Frankfurt-IMAP-Horde ready. mail_access_groups = mhs mail_debug = yes mail_fsync = never mail_location = mbox:~/:INBOX=/var/spool/mail/%u:INDEX=/var/mail-indexes/%u mailbox_idle_check_interval = 90 secs mbox_write_locks = fcntl namespace { inbox = yes location = prefix = separator = / type = private name = } passdb { args = username_format=%u /mailbase/etc/passwd driver = passwd-file } passdb { args = %s driver = pam } plugin { stats_refresh = 30 secs stats_track_cmds = yes } service replication-notify-fifo { name = aggregator } service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns_client } service doveadm-server { name = doveadm } service { inet_listener { address = * port = 0 name = imap } inet_listener { address = * port = 993 name = imaps } name = imap-login } service imap-urlauth { name = imap-urlauth-login } service imap-urlauth-worker { name = imap-urlauth-worker } service token-login/imap-urlauth { name = imap-urlauth } service login/imap { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service { inet_listener { address = 10.1.1.40 port = 0 name = pop3 } inet_listener { address = * port = 0 name = pop3s } name = pop3-login } service login/pop3 { name = pop3 } service replicator-doveadm { name = replicator } service login/ssl-params { name = ssl-params } service stats-mail { name = stats } ssl_cert = </etc/ssl/certs/thot_mit_chain.crt ssl_key = </etc/ssl/certs/private_key_thot.rz.pem userdb { driver = passwd } userdb { args = /mailbase/dovecot/2.2.9/etc/dovecot/dovecot-ldap.conf driver = ldap } protocol imap { mail_plugins = " stats imap_stats" service replication-notify-fifo { name = aggregator } service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns_client } service doveadm-server { name = doveadm } service imap { name = imap-login } service imap-urlauth { name = imap-urlauth-login } service imap-urlauth-worker { name = imap-urlauth-worker } service token-login/imap-urlauth { name = imap-urlauth } service login/imap { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service replicator-doveadm { name = replicator } service login/ssl-params { name = ssl-params } service stats-mail { name = stats } }

1 0

[Dovecot] Fatal: master: service(imap): child n killed with signal 11 (core dumped) - in mail_cache_header_fields_read
by Maciej Uhlig 13 Jan '14

13 Jan '14

This is log from dovecot 2.2.10: 2014-01-13T15:34:39+01:00 server/a.b.c.d dovecot: imap(user@domain): Fatal: master: service(imap): child 6290 killed with signal 11 (core dumped) (gdb) bt full #0 0x00007fe78683aba5 in mail_cache_header_fields_read () from /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #1 0x00007fe78683890a in mail_cache_open_and_verify () from /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #2 0x00007fe78683c339 in mail_cache_field_exists () from /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #3 0x00007fe78683c459 in mail_cache_lookup_field () from /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #4 0x00007fe786821949 in index_mail_cache_lookup_field () from /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #5 0x00007fe7868222d6 in index_mail_update_access_parts () from /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #6 0x00007fe786822676 in index_mail_set_seq () from /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #7 0x00007fe786829f51 in search_more () from /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0 ---Type <return> to continue, or q <return> to quit--- No symbol table info available. #8 0x00007fe78682a778 in index_storage_search_next_nonblock () from /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #9 0x00007fe786800257 in mailbox_search_next_nonblock () from /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #10 0x00007fe7868002b6 in mailbox_search_next () from /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #11 0x000000000041b637 in imap_fetch_more_int () No symbol table info available. #12 0x000000000041b871 in imap_fetch_more () No symbol table info available. #13 0x000000000040d8ae in cmd_fetch () No symbol table info available. #14 0x0000000000418acd in command_exec () No symbol table info available. #15 0x0000000000417b10 in client_command_input () No symbol table info available. #16 0x0000000000417c25 in client_command_input () No symbol table info available. #17 0x00000000004180b5 in client_handle_input () ---Type <return> to continue, or q <return> to quit--- No symbol table info available. #18 0x000000000041892f in client_input () No symbol table info available. #19 0x00007fe786522c66 in io_loop_call_io () from /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot.so.0 No symbol table info available. #20 0x00007fe786523fd5 in io_loop_handler_run () from /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot.so.0 No symbol table info available. #21 0x00007fe786522bd8 in io_loop_run () from /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot.so.0 No symbol table info available. #22 0x00007fe7864cd483 in master_service_run () from /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot.so.0 No symbol table info available. #23 0x0000000000422807 in main () No symbol table info available. (gdb) MU

1 0

[Dovecot] Fwd: problem with Error: net_connect_unix(/var/run/dovecot/dict) failed: Permission denied
by mozek007 13 Jan '14

13 Jan '14

Hi, $ dovecot --version 2.1.7 afrer i send email: log: tail -f /var/log/* <code style='overflow:scroll'>==> sieve.log <== Jan 10 20:44:14 lda(test(a)test.cz<a target='_blank' href='mailto:test@vinotekaolvi.cz'></a>): Error: net_connect_unix(/var/run/dovecot/dict) failed: Permission denied (euid=2000(vmail) egid=2000(vmail) missing +r perm: /var/run/dovecot/dict, dir owned by 0:0 mode=0755) Jan 10 20:44:14 lda(test(a)test.cz<a target='_blank' href='mailto:test@vinotekaolvi.cz'></a>): Error: Internal quota calculation error Jan 10 20:44:14 lda(test(a)test.cz): Info: msgid=<<a target='_blank' href='mailto:1Qg.7WxZ.46PKIvcQWgrs.1Iq4r%7B@seznam.cz'>1Qg.7WxZ.sdfs.1Iq4r{(a)seznam.cz</a>>: save failed to INBOX: Internal error occurred. Refer to server log for more information. [2014-01-10 20:44:14]</code> <code>$ cat /etc/dovecot/dovecot.conf | grep -v "^ *#" | grep -v "^ *$" protocols = pop3 imap sieve listen = * mail_uid = 2000 mail_gid = 2000 first_valid_uid = 2000 last_valid_uid = 2000 auth_master_user_separator = * log_path = /var/log/dovecot.log disable_plaintext_auth = yes auth_default_realm = test.cz plugin { quota_warning = storage=85%% /usr/local/bin/dovecot-quota-warning.sh 85 quota_warning2 = storage=90%% /usr/local/bin/dovecot-quota-warning.sh 90 quota_warning3 = storage=95%% /usr/local/bin/dovecot-quota-warning.sh 95 } ssl = required verbose_ssl = no ssl_key = </etc/ssl/private/iRedMail.key ssl_cert = </etc/ssl/certs/iRedMail_CA.pem ssl_ca = </etc/ssl/certs/iRedMail_CA.pem mail_location = maildir:/%Lh/Maildir/:INDEX=/%Lh/Maildir/ plugin { quota = dict:user::proxy::quotadict quota_rule = *:storage=0 } dict { } plugin { auth_socket_path = /var/run/dovecot/auth-master } plugin { sieve = /%Lh/sieve/dovecot.sieve } protocol lda { postmaster_address = root auth_socket_path = /var/run/dovecot/auth-master mail_plugins = quota sieve autocreate log_path = /var/log/sieve.log } protocol imap { mail_plugins = quota imap_quota autocreate imap_client_workarounds = tb-extra-mailbox-sep } protocol pop3 { mail_plugins = quota pop3_uidl_format = %08Xu%08Xv pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } service auth { unix_listener /var/spool/postfix/dovecot-auth { user = postfix group = postfix mode = 0666 } unix_listener auth-master { user = vmail group = vmail mode = 0666 } unix_listener auth-userdb { user = vmail group = vmail mode = 0660 } } passdb { args = /etc/dovecot/dovecot-master-users-password master = yes driver = passwd-file } passdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } userdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } plugin { autocreate = INBOX autocreate2 = Sent autocreate3 = Trash autocreate4 = Drafts autocreate5 = Junk autosubscribe = INBOX autosubscribe2 = Sent autosubscribe3 = Trash autosubscribe4 = Drafts autosubscribe5 = Junk } dict { quotadict = mysql:/etc/dovecot/dovecot-used-quota.conf } namespace { type = private separator = / prefix = inbox = yes } namespace { type = shared separator = / prefix = Shared/%%u/ location = maildir:/%%Lh/Maildir/:INDEX=/%%Lh/Maildir/Shared/%%u subscriptions = yes list = children } plugin { acl = vfile acl_shared_dict = proxy::acl } dict { acl = mysql:/etc/dovecot/dovecot-share-folder.conf } protocol sieve { } plugin { sieve = /var/vmail/sieve/%Ld/%Ln/dovecot.sieve sieve_dir = /var/vmail/sieve/%Ld/%Ln }</code> <code>$ ll /var/run/dovecot/ | grep dict srw------- 1 root root 0 led 10 20:52 dict</code> So, when i change chmod on /var/run/dovecot/dict, after $ /etc/init.d/ dovecot restart is default. So, how i can change user group or user or something other? I'm trying and googling this resolved about 6 hours. No results :( Thanks for any reply.

3 2

[Dovecot] it's possible to send email from the system after the mailbox quota is full
by ihab 13 Jan '14

13 Jan '14

it's possible to send email from the system after the mailbox quota is full i don't want warning mail i want something else because when i use warning on 100% or 99% or less some times the last message be too large (so if just 5% is free from quota size and the last msg size is 6% from quota ) after that the mailbox will not receive this message or warning message . -- View this message in context: http://dovecot.2317879.n4.nabble.com/it-s-possible-to-send-email-from-the-s… Sent from the Dovecot mailing list archive at Nabble.com.

2 2

[Dovecot] 2.2.10 - core dumps
by Jernej Porenta 13 Jan '14

13 Jan '14

Heya, We are occasionally seeing core dumps with dovecot 2.2.10, which are mostly like this: Jan 11 18:31:08 hostname dovecot: imap(username): Panic: file mail-index-transaction-update.c: line 19 (mail_index_transaction_lookup): assertion failed: (seq >= t->first_new_seq && seq <= t->last_new_seq) Jan 11 18:31:08 hostname dovecot: imap(username): Error: Raw backtrace: /opt/dovecot-2.2.10/lib/dovecot/libdovecot.so.0 [0x2b657523aa3a] -> /opt/dovecot-2.2.10/lib/dovecot/libdovecot.so.0 [0x2b657523aaa6] -> /opt/dovecot-2.2.10/lib/dovecot/libdovecot.so.0 [0x2b6575239b83] -> /opt/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0 [0x2b6574f83458] -> /opt/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0 [0x2b6574f86458] -> /opt/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0(mail_cache_decision_state_update+0xbe) [0x2b6574f7605e] -> /opt/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0(mail_cache_lookup_headers+0x87) [0x2b6574f77ba7] -> /opt/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0 [0x2b6574f64919] -> /opt/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0(index_mail_get_first_header+0x50) [0x2b6574f64e80] -> /opt/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0 [0x2b6574f5fda1] -> /opt/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0 [0x2b6574f5fee9] -> /opt/dovecot-2.2.10/lib/dovecot/libdove Jan 11 18:31:08 hostname dovecot: imap(username): Fatal: master: service(imap): child 13548 killed with signal 6 (core dumps disabled) # dovecot -n is available here: http://pastebin.com/RE91aRi5 other raw traces are available here: http://pastebin.com/M1S33NYn Would you recommend deleting all the index files or rather capturing core dump file for further analysis? Or maybe something completely different ;) thank you in advance, cheers, Jernej

1 0

[Dovecot] [OT] cool bash script for cron with seconds resolution
by Marc Perkel 13 Jan '14

13 Jan '14

Short bash script to run a program 30 20 15 12 10 6 5 4 3 2 executions per minute. http://wiki.junkemailfilter.com/index.php/How_to_run_a_Linux_script_every_f…

2 1

[Dovecot] dsync error: gz trailer has wrong CRC value
by Joe Beaubien 13 Jan '14

13 Jan '14

A few days ago by dovecot installation started behaving weirdly. First it was doveadm fts optimize which would fail (a thread running about that) and now it's dsync, which means my backups are not working. This all started a few days ago, which I find a little weird, because I haven't messed around with the dovecot setup in months. I've been searching the internet, but didn't find anything useful yet. Would anyone know how to fix the errors in the log below? Thanks, -Joe dovecot version is 2.1.7 Here is the log: dsync(archive): Error: zlib.read(/mba_data/emails/archive/storage/m.1885): gz trailer has wrong CRC value at 16966298 dsync(archive): Error: zlib.read(/mba_data/emails/archive/storage/m.1885): missing gz header at 16973513 dsync(archive): Error: zlib.read(/mba_data/emails/archive/storage/m.1885): missing gz header at 16973513 dsync(archive): Error: zlib.read(/mba_data/emails/archive/storage/m.1885): missing gz header at 16973513 dsync(archive): Error: zlib.read(/mba_data/emails/archive/storage/m.1885): missing gz header at 16973513 dsync(archive): Error: zlib.read(/mba_data/emails/archive/storage/m.1885): missing gz header at 16973513 dsync(archive): Error: read(msg input) failed: Invalid argument dsync(archive): Error: zlib.read(/mba_data/emails/archive/storage/m.1885): missing gz header at 16973513 dsync(archive): Panic: file mail-index-transaction-update.c: line 906 (mail_index_update_ext): assertion failed: (seq > 0 && (seq <= mail_index_view_get_messages_count(t->view) || seq <= t->last_new_seq)) dsync(archive): Error: Raw backtrace: /opt/dovecot-2.1.7/lib/dovecot/libdovecot.so.0(+0x4203a) [0x7f3a5150503a] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot.so.0(default_fatal_handler+0x2a) [0x7f3a515050fa] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f3a514dc3f0] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mail_index_update_ext+0x1c7) [0x7f3a51804927] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(+0xa8746) [0x7f3a517f7746] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mail_cache_transaction_commit+0x4c) [0x7f3a517f7a2c] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(+0xa8af3) [0x7f3a517f7af3] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(+0xa2cea) [0x7f3a517f1cea] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mail_index_transaction_commit_full+0x84) [0x7f3a51800754] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(index_transaction_commit+0x8a) [0x7f3a517f209a] -> /opt/dovec ot/lib/d ovecot/lib20_zlib_plugin.so(+0x3b7a) [0x7f3a4fe8cb7a] -> /opt/dovecot/lib/dovecot/lib20_fts_plugin.so(+0xb481) [0x7f3a5009b481] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mailbox_transaction_commit_get_changes+0x3d) [0x7f3a517c9c4d] -> /opt/dovecot/bin/dsync() [0x4297e6] -> /opt/dovecot/bin/dsync() [0x42b222] -> /opt/dovecot/bin/dsync(dsync_worker_select_mailbox+0x2e) [0x4291be] -> /opt/dovecot/bin/dsync() [0x424c75] -> /opt/dovecot/bin/dsync() [0x424db7] -> /opt/dovecot/bin/dsync(dsync_brain_msg_sync_more+0x22c) [0x4245ec] -> /opt/dovecot/bin/dsync(dsync_brain_sync+0x459) [0x422fc9] -> /opt/dovecot/bin/dsync() [0x423e61] -> /opt/dovecot/bin/dsync(dsync_brain_sync+0x7f1) [0x423361] -> /opt/dovecot/bin/dsync() [0x423cdc] -> /opt/dovecot/bin/dsync(dsync_brain_sync+0x832) [0x4233a2] -> /opt/dovecot/bin/dsync(dsync_brain_sync_all+0x18) [0x423ee8] -> /opt/dovecot/bin/dsync() [0x420f36] -> /opt/dovecot/bin/dsync() [0x4215b2] -> /opt/dovecot/bin/dsync() [0x40e798]

1 0

[Dovecot] Panic: file buffer.c: line 307 (buffer_set_used_size): assertion failed: (used_size <= buf->alloc)
by Maciej Uhlig 11 Jan '14

11 Jan '14

This is log from dovecot 2.2.10: 2014-01-11T09:55:14+01:00 server/a.b.c.d dovecot: imap(user@domain): Error: Corrupted transaction log file /pracmail/domain/user/mail/.sent-mail/dovecot.index.log seq 16777216: log file shrank (868 < 6144) (sync_offset=6144) 2014-01-11T09:55:14+01:00 server/a.b.c.d dovecot: imap(user@domain): Panic: file buffer.c: line 307 (buffer_set_used_size): assertion failed: (used_size <= buf->alloc) 2014-01-11T09:55:14+01:00 server/a.b.c.d dovecot: imap(user@domain): Error: Raw backtrace: /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot.so.0(+0x6c2fa) [0x7f0704fa22fa] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot.so.0(+0x6c366) [0x7f0704fa2366] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot.so.0(i_error+0) [0x7f0704f5802f] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot.so.0(+0x67489) [0x7f0704f9d489] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0(mail_transaction_log_file_open+0x2c0) [0x7f07052ed120] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0(mail_transaction_log_open+0xb8) [0x7f07052e99b8] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0(+0xc1784) [0x7f07052cf784] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0(mail_index_open+0xf0) [0x7f07052cfac0] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0(index_storage_mailbox_open+0xac) [0x7f07052c0fac] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0(+0x4d43a) [0x7f070525b43a] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0(+0x4d50f) [0x7f070525b50f] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0(+0x84054) [0x7f0705292054] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0(mailbox_open+0xf) [0x7f070529220f] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0(index_storage_get_status+0x4a) [0x7f07052bfc2a] -> /usr/local/dovecot/lib/dovecot/lib10_quota_plugin.so(+0xb8ac) [0x7f0704d1c8ac] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot-storage.so.0(mailbox_get_status+0x8c) [0x7f0705291ebc] -> dovecot/imap(imap_status_get+0x7a) [0x42058a] -> dovecot/imap(cmd_status+0x15d) [0x413a0d] -> dovecot/imap(command_exec+0x3d) [0x418acd] -> dovecot/imap() [0x417b10] -> dovecot/imap() [0x417c25] -> dovecot/imap(client_handle_input+0x125) [0x4180b5] -> dovecot/imap(client_input+0x6f) [0x41892f] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x7f0704fb2c66] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x95) [0x7f0704fb3fd5] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7f0704fb2bd8] -> /usr/local/dovecot-2.2.10/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f0704f5d483] -> dovecot/imap(main+0x2a7) [0x422807] 2014-01-11T09:55:14+01:00 server/a.b.c.d dovecot: imap(user@domain): Fatal: master: service(imap): child 25125 killed with signal 6 (core dumped) 2014-01-11T09:55:15+01:00 server/a.b.c.d dovecot: imap(user@domain): Error: Transaction log file /pracmail/us.edu.pl/user/mail/.sent-mail/dovecot.index.log: marked corrupted Unfortunately I'm not able to find core file although 'core dumped' is written to the log. MU

1 0

[Dovecot] Dovecot quota with MySQL - username issue
by michael 11 Jan '14

11 Jan '14

Hi all, I'm using Dovecot 2.2.8 with quota using a MySQL backend. The Quota plugin is listed for POP3, IMAP and LDA. When it is enabled for LDA, it populates the "username" field in the MySQL table with e mail addresses. I end up with a mixture of email addresses and usernames, which causes things to not fully work. It *should* be just usernames. the LDA SQL statement is: user_query = \ SELECT mailboxes.username, accounts.uid, accounts.uid AS gid, \ concat('/home/',mailboxes.username) AS home, \ (SELECT IF(accounts.new_mail_fmt=1, \ CONCAT('Maildir:',home,'/Maildir'), \ CONCAT('mbox:',home,'/Maildir:INBOX=/var/spool/mail/',mailboxes.username))) AS mail_location \ FROM mailboxes JOIN accounts ON accounts.username=mailboxes.username \ WHERE (mailboxes.email='%u' || \ (mailboxes.email=CONCAT('@','%d') AND (SELECT COUNT(email) FROM mailboxes \ WHERE email='%u') = 0) AND mailboxes.active IS TRUE) It clearly knows the username. Usernames on this system are just names, not full email addresses. The configuration of Quota Dict is: dovecot.conf dict/quotadict = mysql:/etc/dovecot/dovecot-dict-sql.conf ... quota = dict:user::proxy::quotadict dovecot-dict-sql.conf map { pattern = priv/quota/storage table = quota username_field = username value_field = bytes } map { pattern = priv/quota/messages table = quota username_field = username value_field = messages } Can this be fixed? Michael

2 1

[Dovecot] error when running fts optimize
by Joe Beaubien 11 Jan '14

11 Jan '14

Since yesterday, when I run "fts optimize", I get an error. Command: doveadm -v fts optimize -u formulaire Error: Jan 10 18:05:20 mba dovecot: indexer-worker(formulaire): Error: lucene index /mba_data/emails/formulaire/lucene-indexes: IndexWriter::optimize() failed (#9): bit out of range Does anyone have any idea what causes this and how to fix it? Thanks, Joe Beaubien

1 0

[Dovecot] Possible to force cipher order?
by Matthias Rieber 10 Jan '14

10 Jan '14

Hi, is it possible to force the server cipher order instead of the clients preferences? When I connect with openssl using these ciphers: 'RC4-SHA:DHE-RSA-AES256-GCM-SHA384' -> RC4-SHA will be selected and with 'DHE-RSA-AES256-GCM-SHA384:RC4-SHA' -> DHE-RSA-AES256-GCM-SHA384 It seems to be recommended for webservers to override that due to bad clients choices and increasing knowledge, like RC4 vs. BEAST, AES128 better (theoretical) than AES256. Regards, Matthias

1 1

[Dovecot] Message filtering capability at IMAP proxy
by CM Reddy 10 Jan '14

10 Jan '14

Hi, I would like process the messages at Dovecot IMAP proxy. In one of the documents, it was mentioned that Dovecot proxy currently supports on the fly message filtering in latest releases. Will it it possible to extend the filtering feature to handle the following requirements. 1. Parse the email at IMAP proxy. 2. Replace the links with some other secure links. 3. Replace the attachments with some other document. It would be great, if any one can provide some pointers to move forward. - Thanks in advance CM Reddy

2 1

Re: [Dovecot] imap auto create mailbox: we're not in group 8(mail)
by Joseph Tam 10 Jan '14

10 Jan '14

Adrian Zaugg writes: > How can I configure the auto create mailbox feature that it works and > let run LMTP and IMAP process as user %u and group mail and let create > the mailboxes in /var/mail as (example user tester) with the following > permissions: > > /var/mail: > > drwxrwx--x root mail 3072 Dec 18 01:43 . > drwx------ tester tester 1024 Jan 09 12:53 tester This is probably what you need: # Group to enable temporarily for privileged operations. Currently this is # used only with INBOX when either its initial creation or dotlocking fails. # Typically this is set to "mail" to give access to /var/mail. mail_privileged_group = mail > ...or do I need a different approach? You could also chmod 1777 /var/mail but this will allow arbitrary uses who have filesystem access to create their own files here, and maybe DoS a new user from being created (or maybe even anticipate a new mailbox, create one with mode 0777 and wait to intercept mail?). Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] LDA quota rejection
by Davide 09 Jan '14

09 Jan '14

Hi to all, i have dovecot 2.2.5 and i have implemented lda rejection through quota full this is my dovecot conf protocol lda { mail_fsync = optimized auth_socket_path = /usr/local/var/run/dovecot/auth-userdb deliver_log_format = msgid=<%f>-<%s>-%m: %$ hostname = mail.cgilfe.it info_log_path = /var/log/dovecot/dovecot-deliver.log log_path = /var/log/dovecot/dovecot-deliver.log mail_plugin_dir = /usr/local/lib/dovecot mail_plugins = $mail_plugins mail_log sieve postmaster_address = postmaster(a)mail.cgilfe.it rejection_subject = Rifiutato: %s rejection_reason = Messaggio a <%t> automaticamente rifiutato:%n%r submission_host = 192.16X.XXX.XX0 } If user over quota receive a messagge internally all is ok but if the user receive a mail from external domains nothing to the sender is sentback. Thanks in advance to all for possible help. -- *Davide Marchi* *T*eorema *F*errara *Srl* Via Spronello, 7 - Ferrara - 44121 Tel. *0532783161* Fax. *0532783368* E-m@il: *davide.marchi(a)mail.cgilfe.it* Skype: *davide.marchi73* Web: *http://www.cgilfe.it* *CONFIDENZIALITA'* *Ai sensi del D.Lgs. 196/2003 si precisa che le informazioni contenute in questo messaggio sono riservate ed a uso esclusivo del destinatario/dei destinatari. Qualora il messaggio in parola Le fosse pervenuto per errore, La invitiamo ad eliminarlo senza copiarlo e a non inoltrarlo a terzi, dandocene gentilmente comunicazione.* *Per favore, pensa all'ambiente. Stampa questa email solo se necessario.*

4 3

[Dovecot] imap auto create mailbox: we're not in group 8(mail)
by Adrian Zaugg 09 Jan '14

09 Jan '14

Dear List Somehow I don't understand the intended work flow to have new mailboxes auto created. On login of a new user with no mailbox, I get 2014-01-09 12:53:06 imap(tester): Error: user tester: Initialization failed: Namespace '': mkdir(/var/mail/tester) failed: Permission denied (euid=1016(tester) egid=1016(tester) missing +w perm: /var/mail, we're not in group 8(mail), dir owned by 0:8 mode=0771) The imap process runs as the user the login performed and thus it has only the privileges of that user. This is good and desired, when a mailbox already exists. I do not want to allow all users to write to /var/mail, only they should write to their dirs inside /var/mail. Same story for LMTP, if no mailbox exists yet: 2014-01-09 13:01:47 lmtp(20416, tester): Error: user tester: Initialization failed: Namespace '': mkdir(/var/mail/tester) failed: Permission denied (euid=1016(tester) egid=1016(tester) missing +w perm: /var/mail, we're not in group 8(mail), dir owned by 0:8 mode=0771) How can I configure the auto create mailbox feature that it works and let run LMTP and IMAP process as user %u and group mail and let create the mailboxes in /var/mail as (example user tester) with the following permissions: /var/mail: drwxrwx--x root mail 3072 Dec 18 01:43 . drwx------ tester tester 1024 Jan 09 12:53 tester ...or do I need a different approach? Thank you for helping me. Best regards, Adrian. My setup: ======== * Exim delivers to LMTP socket as user %u, group mail * maildir storage in /var/mail doveconf -n: # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.3 ext3 auth_cache_negative_ttl = 0 auth_cache_size = 5 M auth_cache_ttl = 4 hours auth_failure_delay = 3 secs auth_mechanisms = plain login digest-md5 cram-md5 apop rpa auth_username_format = %n auth_verbose = yes auth_worker_max_count = 128 first_valid_gid = 1000 first_valid_uid = 1000 last_valid_gid = 60000 last_valid_uid = 60000 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes log_path = /var/log/dovecot/dovecot.log log_timestamp = "%Y-%m-%d %H:%M:%S " login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c %k mail_location = maildir:/var/mail/./%u/:INDEX=MEMORY mail_prefetch_count = 1024 maildir_stat_dirs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave vacation-seconds namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = type = private } passdb { args = scheme=SHA512-CRYPT username_format=%u /etc/cram-md5.pwd driver = passwd-file } plugin { sieve = /var/mail/%u/sieve/.dovecot.sieve sieve_before = /var/mail/%u/sieve/vacation.sieve sieve_dir = /var/mail/%u/sieve sieve_extensions = +vacation +vacation-seconds sieve_max_actions = 1024 sieve_vacation_default_period = 12d sieve_vacation_max_period = 0 sieve_vacation_min_period = 1d } postmaster_address = postmaster@XXXX protocols = " imap lmtp sieve pop3" service auth-worker { user = $default_login_user } service auth { group = mail-security unix_listener auth-client { mode = 0660 user = Debian-exim } unix_listener auth-userdb { mode = 0666 } user = $default_internal_user } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_min_avail = 5 } service lmtp { process_min_avail = 10 unix_listener lmtp { mode = 0666 } } service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieve_deprecated { port = 2000 } service_count = 1 vsz_limit = 64 M } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service pop3 { process_limit = 256 } ssl_cert = </etc/ssl/XXXX ssl_cipher_list = DHE-RSA-AES256-GCM-SHA384:DHE-RSA-AES256-SHA256:DHE-RSA-AES256-SHA:DHE-RSA-CAMELLIA256-SHA:DHE-RSA-AES256-SHA:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES128-SHA256:+TLSv1:!RC4:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!CBC:!PSK:!SRP:!SSLv2:!3DES:!DSS ssl_key = </etc/ssl/XXXX ssl_parameters_regenerate = 128 hours userdb { args = blocking=no driver = passwd override_fields = home=/var/mail/%u mail=maildir:/var/mail/%u } protocol lmtp { mail_plugins = " sieve" } protocol lda { mail_plugins = " sieve" } protocol imap { mail_max_userip_connections = 64 } protocol pop3 { mail_max_userip_connections = 32 pop3_client_workarounds = oe-ns-eoh pop3_save_uidl = yes }

2 2

Re: [Dovecot] BUG report: doveadm HEADER <field> <pattern> when concatenating with another Search key
by Joseph Tam 09 Jan '14

09 Jan '14

> So E.g. When doing > doveadm fetch -u exampleuser hdr SUBJECT Silvester HEADER > Return-Path someuser(a)example.com > > it initially outputs 13 headers (same as when using with SUBJECT Silvester > only) , when piping it to "grep -i 'Return-Path'" it even found only 3 out > of 13 headers containing a Return-Path at all, 2 of them different than > someuser(a)example.com - so SAME behaviour as with search. I tried using logical conjections of header searches and it works with my installation of dovecot, so either it's a bug introduced later than 2.1.16, or perhaps it from the different search engine you use (I use the default that comes with dovecot -- squat?). Sorry, can't help you out further. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Disallow certain characters in foldernames?
by Charles Marcus 08 Jan '14

08 Jan '14

Is there a way to do this in dovecot? Similar to how you can When using Maildir and Thunderbird, if a user tries to a create folder named "test.1" or "test/1", dovecot will happily create a folder called "test", with a subfolder called "1". Worse, the top level folder "test" is greyed out, which is how Thunderbird displays a folder that can contain only other folders, not both folders and files. I want to disallow this. Obviously I'd prefer if Thunderbird would display a meaningful error, but most likely dovecot cannot control that. I don't really care if the user just gets some kind of weird generic error or not, I'd just prefer to prevent dovecot from creating the problematic folders, and explain the problem to the user if/when they call about it (after NOT reading my carefully crafted documentation explaining the illegal characters that cannot be used in foldernames). -- Best regards, Charles

2 3

[Dovecot] acl, shared folders
by Infoomatic 08 Jan '14

08 Jan '14

Hi list, After spending quite some time to figure out how users can share folders I now hope someone of you could help me out. I am quite sure its just a stupid mistake/misunderstanding ... I am using Ubuntu 12.04 LTS with the shipped dovecot 2.0.19 When I login via telnet as user1 I get the following: 1 create folder1 1 OK Create completed. 2 setacl folder1 user2 rli 2 OK Setacl complete. 3 getacl folder1 * ACL "folder1" "user2" ilr "user1" lrwstipekxacd 3 OK Getacl completed. This seems fine. However, there is nothing listed in the account of user2. I think the mistake is in the namespace configuration of "location" or "prefix" Please help! Thanks! infoomatic # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-45-generic x86_64 Ubuntu 12.04.3 LTS ext4 auth_username_format = %n disable_plaintext_auth = no mail_debug = yes mail_gid = vmail mail_home = /var/lib/vmail/home/%u mail_location = mdbox:/var/lib/vmail/mail/%u mail_plugins = " acl zlib fts fts_solr acl" mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave imapflags mdbox_rotate_size = 64 M namespace { inbox = yes location = prefix = separator = / type = private } namespace { list = children location = mdbox:/var/lib/vmail/mail/%%n/mailboxes/shared/%n prefix = shared/%%n/ separator = / subscriptions = no type = shared } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_shared_dict = file:/var/lib/vmail/shared-mailboxes fts = solr fts_solr = break-imap-search url=http://localhost:8080/solr/ sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_extensions = +imapflags zlib_save = bz2 zlib_save_level = 6 } protocols = " imap sieve pop3" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail user = vmail } } service managesieve-login { inet_listener sieve_deprecated { port = 2000 } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lda { mail_plugins = " sieve acl" } protocol imap { mail_plugins = " acl imap_acl" }

2 2

[Dovecot] Dovecot deliver into folder question
by Marc Perkel 08 Jan '14

08 Jan '14

If I want to user dovecot deliver into a folder that is not at the root level - how do I do that? How do I specify a folder in a folder?

4 7

[Dovecot] LMTP with virtual and system users
by Philipp Kolmann 08 Jan '14

08 Jan '14

Hi, I have a mailsystem where i have some local users with shell access and full home dirs which receive mail and also several SQL virtual users only for mail. With the virtual users, everything works fine. Mail is delivered via LMTP and also sieve works :) The SQL Lookup knows what to do with username(a)domain.com The problem is the system user. If exim delivers the mail to the lmtp socket, the LMTPd can't find username(a)local.host I would be able to specify the global auth_username_format=%n but then my SQL queries break and I like the possibility to have xx(a)domain1.com and xx(a)domain2.com routed to two different accounts. As I have seen in the source, I can't specify username_format=%n in the passdb { driver = pam } backend. Do you have any suggestion how to solve this issue? thanks Philipp

3 6

[Dovecot] Question re: filesystem permissions
by Charles Marcus 08 Jan '14

08 Jan '14

Hi all, I want to make sure the filesystems are correct/optimal and secure as possible. This is a virtual hosting setup only (no system users), and dovecot is currently running in high performance mode (I'm thinking I want to change that too, so wondering if that would affect the permissions)... /var/vmail (and everything under it) is owned by vmail:vmail. Current permissions are: /var/vmail 755 /var/vmail/example1.com 777 /var/vmail/example2.com 777 /var/vmail/example1.com/user1 755 (all other user home dirs are the same) /var/vmail/example1.com/user1/Maildir 700 (all other user Maildirs and all subdirs are the same) All files are 600, with the exception of the dovecot-uidvalidity.blahblah files, which are 444 So... is this right? Anything need to be changed? Thanks, -- Best regards, Charles

3 6

[Dovecot] virtual mailboxes folder structure
by Marco Cusano 08 Jan '14

08 Jan '14

Hi, I am trying to find a way to list my virtual mailboxes hiding the namespace prefix into my imap client. Fore example now my “All” mailbox is listed under virtual/ as: Inbox Sent Drafts Spam Trash - virtual All I would like to list as this: Inbox Sent Drafts Spam Trash All This is my 10-mail.conf: http://pastebin.com/DumEbbmy and this is my 15-mailboxes.conf: http://pastebin.com/QFzWGzyC I thought that the list = children paramenter would do but it did not. Thank you

1 0

Re: [Dovecot] BUG report: doveadm HEADER <field> <pattern> when concatenating with another Search key
by megodin＠inboxalias.com 08 Jan '14

08 Jan '14

Hey Joseph! Thanks for testing. > I couldn't recreate this with 2.1.16. Also, my version of "doveadm > search" does not accept missing header patterns. Is this corroborated > by dumping out the header with this same search query? > > doveadm fetch -u exampleuser hdr SUBJECT Silvester \ > HEADER Return-Path someuser at example.com Yes, it's same phenomenon when dumping with fetch. Of course you can only test this properly when you really have some mails with corresponding existing Header fields. (You can also try out other HEADER fields, like Reply-To, References, X-Spam-Score or whatever - just look at some mail headers of your mails and try it with existing fields.) So E.g. When doing doveadm fetch -u exampleuser hdr SUBJECT Silvester HEADER Return-Path someuser(a)example.com it initially outputs 13 headers (same as when using with SUBJECT Silvester only) , when piping it to "grep -i 'Return-Path'" it even found only 3 out of 13 headers containing a Return-Path at all, 2 of them different than someuser(a)example.com - so SAME behaviour as with search. Maybe also relevant, as mail format I'm using sdbox (on a larger user base of 40.000 people). -- (relevant part) of dovecot -n # 2.2.5.5 (e5350245ad9b): /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-358.23.2.el6.x86_64 x86_64 Red Hat Enterprise Linux Server release 6.4 (Santiago) nfs auth_cache_size = 100 M auth_cache_ttl = 10 mins auth_master_user_separator = * auth_mechanisms = plain login auth_username_format = %Ln auth_verbose = yes disable_plaintext_auth = no import_environment = TZ DEBUG_OUTOFMEM DOVECOT_HOSTDOMAIN listen = * lock_method = dotlock mail_fsync = always mail_home = /mnt/nfs/vmails/%u mail_location = sdbox:/mnt/nfs/vmails/%u/mail:ALT=/mnt/archivnfs/vmails/%u/mail mail_plugins = " quota fts fts_lucene" mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mmap_disable = yes service imap-login { process_limit = 200 process_min_avail = 8 service_count = 0 vsz_limit = 512 M } service imap { client_limit = 1 process_limit = 10000 } service pop3-login { process_limit = 200 process_min_avail = 8 } service pop3 { process_limit = 10000 } verbose_proctitle = yes protocol lda { mail_plugins = " quota fts fts_lucene sieve" } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep mail_max_userip_connections = 50 mail_plugins = " quota fts fts_lucene imap_quota" } _________________________________________________________________ Send and receive anonymous emails to your inbox with InboxAlias. http://www.inboxalias.com

1 0

[Dovecot] how to separate virtual delivery and authentication?
by Mihai Badici 08 Jan '14

08 Jan '14

I have a "pure ldap" setting with postfix and dovecot. When using dovecot delivery, the recipient is checked via ldap. The same ldap query is used when authenticate. So, if I want to authenticate with the uid , I can't use a filter like uid=%u because the delivery will fail. I don't want to use %nor something else because I could use multiple e-mail addresses on a single account. I actually use a filter like ( mail=%u)|(uid=%u) but I think for more complex situations should be better to have two separate filters, one for authentication and the other for the delivery. What is your oppinion? -- Mihai Bădici http://mihai.badici.ro

2 7

Re: [Dovecot] BUG report: doveadm HEADER <field> <pattern> when concatenating with another Search key
by Joseph Tam 08 Jan '14

08 Jan '14

On Wed, 8 Jan 2014, dovecot-request(a)dovecot.org wrote: > doveadm search -u exampleuser SUBJECT Silvester > (outputs correctly 10 matches) > > ... > > doveadm search -u exampleuser SUBJECT Silvester HEADER Return-Path > someuser(a)example.com > (gives exactly the same output - but this is WRONG, as the given Subject > AND Return-Path is really only found in 1 Message - uid 15697) I couldn't recreate this with 2.1.16. Also, my version of "doveadm search" does not accept missing header patterns. Is this corroborated by dumping out the header with this same search query? doveadm fetch -u exampleuser hdr SUBJECT Silvester \ HEADER Return-Path someuser(a)example.com Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Dovecot can't find CLucene's libstemmer on FreeBSD
by interfaSys sàrl 08 Jan '14

08 Jan '14

Hello, A set of patches was created by Lawrence Chen for the Dovecot2 port so that it could recognise and use libstemmer and libexttextcat. They can't be used as is as he's replacing statements with something that works only on FreeBSD, but I think it would be a good idea to try and include some of his fixes. http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/175813 Cheers, Olivier

1 0

Re: [Dovecot] using OR in doveadm search query
by Joseph Tam 08 Jan '14

08 Jan '14

> > This works for me (at least with tcsh): > > > > $ doveadm search mailbox "shared/* OR (SUBJECT a) (SUBJECT b)" > doveadm does not complain anymore but it does not find anything. I guess > because now the query has become a mailbox name that does not exist. ( I > am using dovecot 2.2.9) Each search token ought to be a command line argument to doveadm, so if you're looking for all message with the string "a" or "b" in the subject in mailboxes shared/*, then this should be the correct syntax, with all arguments sufficiently escaped from shell interpretation: doveadm search mailbox shared/\* $ SUBJECT a OR SUBJECT b $ (Delete "OR" if both strings must be in the subject: expressions are implicitly AND'd if not OR'd. In fact, you can also remove the parenthesis since precedence doesn't matter anymore.) You can check the search query by fetching some values using the same query: doveadm fetch 'mailbox hdr' mailbox shared/\* $ SUBJECT a OR SUBJECT b $ Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Mailbox autocreate feature cannot create folders
by interfaSys sàrl 08 Jan '14

08 Jan '14

Hello, The "new" way of creating default mailboxes doesn't work for us. There seems to be a permission problem. We get this in the logs: imap(testuser(a)domain.com): Error: nfs_flush_file_handle_cache_dir: rmdir(/var/mail) failed: Device busy That error message has nothing to do with NFS (not used) or /var/mail and appears every time an app is requesting a list of folders via IMAP and only if we enable the autocreate feature. We're using mdbox, emails are delivered via LDA and the folder permissions look like this: # la /home/user/imap/domain.com/testuser/mdbox/mailboxes/ total 5 drwx------ 3 user mail 3B Jan 5 19:33 INBOX drwx------ 3 user mail 3B Jan 5 19:33 . drwx------ 4 user mail 8B Jan 7 02:43 .. The mailbox definitions used come straight from the wiki: http://wiki2.dovecot.org/MailboxSettings I've enabled debugging, but there is no mention of the mailboxes to create: Debug: dict quota... Debug: Namespace : type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:~/mdbox Debug: fs:... Debug: acl:... ... Here is what works: - Autocreate plugin - Creating folders via various clients So, it seems Dovecot can create folders, just not using that feature. If that's not a bug, would there be a way to make it work without altering permissions? Cheers, Olivier

1 0

[Dovecot] inotify max_user instances
by Charles Marcus 07 Jan '14

07 Jan '14

Hello, Timo, last year when you remoted into our server and performed the migration from courier-imap, we ran into this issue, and you solved it by doing: echo 1024 > /proc/sys/fs/inotify/max_user_instances Then you said you were going to solve this permanently by changing the init script... Here is what you said (this is from the skype chat): [2012-06-04 10:40:43 AM] timosirainen: probably put to dovecot init script or something I guess I could manually modify my init script, but I'm clueless as to where.how. The current (gentoo) init script is: > #!/sbin/runscript > # Copyright 1999-2012 Gentoo Foundation > # Distributed under the terms of the GNU General Public License, v2 or > later > # $Header: > /var/cvsroot/gentoo-x86/net-mail/dovecot/files/dovecot.init-r4,v 1.1 > 2012/12/01 10:40:49 eras Exp $ > > extra_started_commands="reload" > > depend() { > need localmount > before postfix > after bootmisc ldap mysql ntp-client ntpd postgresql saslauthd > slapd > use logger net > } > > checkconfig() { > DOVECOT_INSTANCE=${SVCNAME##*.} > if [ -n "${DOVECOT_INSTANCE}" -a "${SVCNAME}" != "dovecot" ]; then > DOVECOT_CONF=/etc/dovecot/dovecot.${DOVECOT_INSTANCE}.conf > else > DOVECOT_CONF=/etc/dovecot/dovecot.conf > fi > if [ ! -e ${DOVECOT_CONF} ]; then > eerror "You will need an ${DOVECOT_CONF} first" > return 1 > fi > if [ -x /usr/sbin/dovecot ]; then > DOVECOT_BASEDIR=$(/usr/sbin/dovecot -c ${DOVECOT_CONF} > -a | grep '^base_dir = ' | sed 's/^base_dir = //') > else > eerror "dovecot not executable" > return 1 > fi > DOVECOT_BASEDIR=${DOVECOT_BASEDIR:-/var/run/dovecot} > DOVECOT_PIDFILE=${DOVECOT_BASEDIR}/master.pid > } > > start() { > checkconfig || return 1 > ebegin "Starting ${SVCNAME}" > start-stop-daemon --start --exec /usr/sbin/dovecot \ > --pidfile "${DOVECOT_PIDFILE}" -- -c "${DOVECOT_CONF}" > eend $? > } > > stop() { > checkconfig || return 1 > ebegin "Stopping ${SVCNAME}" > start-stop-daemon --stop --exec /usr/sbin/dovecot \ > --pidfile "${DOVECOT_PIDFILE}" > eend $? > } > > reload() { > checkconfig || return 1 > ebegin "Reloading ${SVCNAME} configs and restarting auth/login > processes" > start-stop-daemon --signal HUP --exec /usr/sbin/dovecot \ > --pidfile "${DOVECOT_PIDFILE}" > eend $? > } Suggestions? -- Best regards, Charles

2 2

[Dovecot] Panic: file mailbox-list-maildir.c: line 133: unreached
by Raúl Massano Brás 07 Jan '14

07 Jan '14

Hi I am using dovecot 2.0.9 on CentOS 6.4 The following error appears in the logs when users connect to the imap server using MACs. All other clients that I tested work fine. ###### BEGIN ERROR ###### Jan 5 18:04:25 mail dovecot: imap(jcf): Panic: file mailbox-list-maildir.c: line 133: unreached Jan 5 18:04:25 mail dovecot: imap(user): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0x3ca6a) [0x7f991df2ca6a] -> /usr/lib64/dovecot/libdovecot.so.0(+0x3cab6) [0x7f991df2cab6] -> /usr/lib64/dovecot/libdovecot.so.0(+0x16dba) [0x7f991df06dba] -> /usr/lib64/dovecot/libdovecot-storage.so.0(+0x3eace) [0x7f991e1aface] -> /usr/lib64/dovecot/libdovecot-storage.so.0(mailbox_list_is_valid_pattern+0x26) [0x7f991e1a4f86] -> /usr/lib64/dovecot/libdovecot-storage.so.0(+0x3c861) [0x7f991e1ad861] -> /usr/lib64/dovecot/libdovecot-storage.so.0(fs_list_iter_next+0x2f) [0x7f991e1ad3ff] -> /usr/lib64/dovecot/libdovecot-storage.so.0(mailbox_list_iter_next+0xa) [0x7f991e1a490a] -> dovecot/imap() [0x40b399] -> dovecot/imap(cmd_list_full+0x426) [0x40c246] -> dovecot/imap() [0x40f8cd] -> dovecot/imap() [0x40f9ba] -> dovecot/imap(client_handle_input+0x135) [0x40fbe5] -> dovecot/imap(client_input+0x5f) [0x41050f] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_call_io+0x48) [0x7f991df37e08] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run+0x9f) [0x7f991df38d7f] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f991df37d98] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f991df26203] -> dovecot/imap(main+0x2f9) [0x418809] -> /lib64/libc.so.6(__libc_start_main+0xfd) [0x7f991d76fcdd] -> dovecot/imap() [0x408229] ###### END ERROR ###### The dovecot configuration is: ###### BEGIN CONFIG ###### # dovecot -n # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-358.23.2.el6.x86_64 x86_64 CentOS release 6.4 (Final) disable_plaintext_auth = no mail_access_groups = mail mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u mbox_write_locks = fcntl namespace { hidden = yes inbox = yes list = yes location = mbox:~/mail:INBOX=/var/spool/mail/%u prefix = "#mbox/" separator = / type = private } namespace { location = maildir:~/Maildir prefix = separator = / type = private } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } ssl_ca = </etc/pki/tls/certs/TERENA.crt ssl_cert = </etc/pki/tls/certs/mail.iseg.ulisboa.pt.crt ssl_key = </etc/pki/tls/private/mail.iseg.ulisboa.pt.key syslog_facility = local0 userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } ###### END CONFIG ###### I don't know what to do to allow MAC users to use the system. Can anyone help? Thank you, -- Raúl Brás Instituto Superior de Economia e Gestão Universidade de Lisboa

2 2

[Dovecot] using OR in doveadm search query
by W. de Hoog 07 Jan '14

07 Jan '14

Hi, I am trying to create an OR query but no success yet: $ doveadm search mailbox shared/* OR SUBJECT "a" SUBJECT "b" doveadm(neil): Fatal: Use parenthesis when mixing ANDs and ORs $ doveadm search mailbox shared/* OR $SUBJECT "a"$ $SUBJECT "b"$ doveadm(neil): Fatal: Unknown argument (SUBJECT $ doveadm search mailbox shared/* $OR \(SUBJECT "a"$ $SUBJECT "b"$\) doveadm(neil): Fatal: Unknown argument (OR What is the correct syntax for such a query? -- Willem-Jan de Hoog

2 2

[Dovecot] What's the parameter -w for dovecot-auth: dovecot -w
by ldaamandy 07 Jan '14

07 Jan '14

hello: What's the parameter -w for dovecot-auth: dovecot -w my service of dovecot-auth always activing two: one is" dovecot-auth" , the other is" dovecot-auth -w" i don't know the diffevent between them amandy thanks!

2 4

[Dovecot] need assistance migrating between apple servers
by Raymond Norton 06 Jan '14

06 Jan '14

I am attempting to move imap folders from an Apple Snow Leopard server to a new Apple Mavericks server. Dovecot --version is not working , but I believe the old server is running dovecot 1.1.2 and can confirm the new one is running 2.2.x. I have tried taring and moving folders, but have not been able to get the transfered messages and folders to show up in user accounts (new messages show up fine). I have attempted to recreate index files, but that has not worked either. The last attempt I made to migrate was to use dsync, but it does not exist on the old server and I do not see a way to install it. What method would work best to migrate or move files and folders from the old server and get them to show up for clients on using the new server? -- Raymond Norton LCTN 952.955.7766 Sent from My Desktop

2 1

[Dovecot] virtual mailboxes folder structure
by Marco Cusano 06 Jan '14

06 Jan '14

Hi, I am trying to find a way to list my virtual mailboxes hiding the namespace prefix into my imap client. Fore example now my “All” mailbox is listed under virtual/ as: Inbox Sent Drafts Spam Trash virtual All I would like to list as this: Inbox Sent Drafts Spam Trash All This is my 10-mail.conf: http://pastebin.com/DumEbbmy and this is my 15-mailboxes.conf: http://pastebin.com/QFzWGzyC I thought that the list = children paramenter would do but it did not. Thank you

1 0

[Dovecot] virtual mailboxes folder structure
by Marco Cusano 06 Jan '14

06 Jan '14

Hi, I am trying to find a way to list my virtual mailboxes hiding the namespace prefix into my imap client. Fore example now my “All” mailbox is listed under virtual/ as: Inbox Sent Drafts Spam Trash virtual All I would like to list as this: Inbox Sent Drafts Spam Trash All This is my 10-mail.conf: http://pastebin.com/DumEbbmy and this is my 15-mailboxes.conf: http://pastebin.com/QFzWGzyC I thought that the list = children paramenter would do but it did not. Thank you

1 0

[Dovecot] [SIEVE] Locking Errors with vnd.dovecot.duplicate Extension
by Daniel Parthey 06 Jan '14

06 Jan '14

Hi, we are running a 4 host setup which each hosts a director+mailbox which is mounted via NFSv4 from a DRBD cluster. * Dovecot upstream release 2.1.16 * Doveadm batch subcommand fix - http://hg.dovecot.org/dovecot-2.1/raw-rev/850b5d8bbcc9 * Pigeonhole release 0.3.4 Now we would like to remove duplicate Mails using the vnd.dovecot.duplicate extension using a SIEVE script like this: require ["vnd.dovecot.duplicate", "fileinto", "mailbox", "regex", "vacation", "variables"]; if duplicate { fileinto :create "Trash"; } But as soon as we start delivering duplicate mails, we're sometimes getting locking errors from the mailbox (which is responsible for the user) according to the director: Dec 27 16:36:30 10.129.3.213 dovecot: lmtp(27975, user001(a)example.org) Error: Creating lock file for /mail/dovecot/example.org/user001/.dovecot.lda-dupes timed out in 20 secs Dec 27 16:36:33 10.129.3.213 dovecot: lmtp(27987, user001(a)example.org) Error: Creating lock file for /mail/dovecot/example.org/user001/.dovecot.lda-dupes timed out in 20 secs Dec 27 16:36:35 10.129.3.213 dovecot: lmtp(27994, user001(a)example.org) Error: Creating lock file for /mail/dovecot/example.org/user001/.dovecot.lda-dupes timed out in 20 secs Dec 27 16:36:36 10.129.3.213 dovecot: lmtp(28011, user001(a)example.org) Error: Creating lock file for /mail/dovecot/example.org/user001/.dovecot.lda-dupes timed out in 20 secs Dec 27 16:36:36 10.129.3.213 dovecot: lmtp(28013, user001(a)example.org) Error: Creating lock file for /mail/dovecot/example.org/user001/.dovecot.lda-dupes timed out in 20 secs Dec 27 16:36:38 10.129.3.213 dovecot: lmtp(28017, user001(a)example.org) Error: Creating lock file for /mail/dovecot/example.org/user001/.dovecot.lda-dupes timed out in 20 secs Dec 27 16:36:39 10.129.3.213 dovecot: lmtp(28025, user001(a)example.org) Error: Creating lock file for /mail/dovecot/example.org/user001/.dovecot.lda-dupes timed out in 20 secs Dec 27 16:36:42 10.129.3.213 dovecot: lmtp(28037, user001(a)example.org) Error: Creating lock file for /mail/dovecot/example.org/user001/.dovecot.lda-dupes timed out in 20 secs Dec 27 16:36:43 10.129.3.213 dovecot: lmtp(27973, user001(a)example.org) Error: Creating lock file for /mail/dovecot/example.org/user001/.dovecot.lda-dupes timed out in 20 secs Configs and Error log is attached. Any idea how to mitigate these locking issues? Regards Daniel

1 0

[Dovecot] disable_plaintext_auth = yes not showing in doveconf -n output?
by Charles Marcus 04 Jan '14

04 Jan '14

I have it set, but it doesn't show up. However, I noticed that it does show as enabled by default in doveconf -a output. Is this why it doesn't show up in doveconf -n output? -- Best regards, Charles

4 5

[Dovecot] RFE: IMAP LIST Extension for Special-Use Mailboxes
by Patrick Ben Koetter 03 Jan '14

03 Jan '14

Timo, would you consider adding support for "IMAP LIST Extension for Special-Use Mailboxes" <http://www.rfc-editor.org/rfc/rfc6154.txt> any time near in the future? I would really love to get rid of all those folders created by all those different mail clients just because they can't agree to use the same folder for special purpose. Obviously clients need to support it too. Having Dovecot support it certainly would make them adopt the standard sooner. p@rick -- state of mind Digitale Kommunikation http://www.state-of-mind.de Franziskanerstraße 15 Telefon +49 89 3090 4664 81669 München Telefax +49 89 3090 4666 Amtsgericht München Partnerschaftsregister PR 563

10 17

[Dovecot] Allow both SSL/993 and STARTTLS/143 connections (secure only)
by Charles Marcus 03 Jan '14

03 Jan '14

Hi all, Ok, up until now, I've only always allowed IMAPS connections to dovecot on port 993. I want to also start allowing clients to user port143+STARTTLS, but I walso want to make sure both ports are locked down to ONLY allow secure connections. So... is disable_plaintext_auth = yes in the main config enough to accomplish this? http://wiki2.dovecot.org/SSL/DovecotConfiguration says: There are a couple of different ways to specify when SSL/TLS is required: * disable_plaintext_auth=yes allows plaintext authentication <http://wiki2.dovecot.org/Authentication/Mechanisms> only when SSL/TLS is used first. * ssl = required requires SSL/TLS also for non-plaintext authentication <http://wiki2.dovecot.org/Authentication/Mechanisms>. * If you have only plaintext mechanisms enabled (auth { mechanisms = plain login } ), you can use either (or both) of the above settings. They behave exactly the same way then and the comments in 10-auth.conf say: # Disable LOGIN command and all other plaintext authentications unless # SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP # matches the local IP (ie. you're connecting from the same computer), the # connection is considered secure and plaintext authentication is allowed. # See also ssl=required setting. #disable_plaintext_auth = yes These seem to be saying that all I need to do is set either or both (ssl-required and/or disable_plaintext_auth=yes). I'm looking for the simplest, and don't like redundant/unnecessary settings, so... which is the best/preferred way? And what is the difference between ssl=required and disable_plaintext_auth=yes? Thanks, -- Best regards, */Charles/***

2 3

[Dovecot] How to remove Dovecot (LMTP) information from Email header
by Anant 02 Jan '14

02 Jan '14

Hello All, I want to remove Dovecot (LMTP) information from Email Header, Please help me. I am using Dovecot 2.0.9 with Exim. Received: from XX.XXblue.co.uk by XX.XXblue.co.uk*(Dovecot) with LMTP id* XIuTJkJFxVLKTwAAG2fxGQ for <anant.saraswat(a)techblue.co.uk>; Thu, 02 Jan 2014 10:59:28 +0000 Received: from [210.7.64.2] (helo=[192.168.100.71]) by solo.techblue.co.uk with esmtp (Exim 4.72) (envelope-from <sysadmin(a)techblue.co.uk>) id 1Vyfzr-0005Oy-7H for anant.saraswat(a)techblue.co.uk; Thu, 02 Jan 2014 10:59:28 +0000 Thanks & Regards, Anant Saraswat

2 2

[Dovecot] Problem building dovecot 2.2.10 with pigeonhole 0.4.2
by Nikolaos Milas 02 Jan '14

02 Jan '14

Hi, I am on CentOS 5.10 x86_64 and I am trying to build RPMs for Dovecot 2.2.10 with pigeonhole 0.4.2. I am getting an error that autogen.sh is missing from pigeonhole 0.4.2 source (as available from: http://pigeonhole.dovecot.org/releases/2.2/dovecot-2.2-pigeonhole-0.4.2.tar…) /var/tmp/rpm-tmp.89185: line 92: /home/mockbuild/rpmbuild/BUILD/dovecot-2.2.10/dovecot-2.2-pigeonhole-0.4.2/autogen.sh: No such file or directory Indeed, the file is missing, as: tar --list -f dovecot-2.2-pigeonhole-0.4.2.tar.gz | grep autogen ...produces no output. However, I managed to use the latest source code: http://hg.rename-it.nl/dovecot-2.2-pigeonhole/shortlog/32beba3bfd8d which does contain an autogen.sh, and this package worked fine. I guess the released source tar pack should be updated? Thanks and regards, Nick

2 1

[Dovecot] Dovecot doesn't seem to read userdb for the first delivery
by phuhimself＠phunehehe.net 02 Jan '14

02 Jan '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hello List, First of all, this is my first post so please bear with me if I miss something. I'm using Postfix with Dovecot 2.0.19 as the LDA. The home directory is of the form `/var/mail/virtual/<domain>/<username>`. The mail directory is under the home directory and named `mail`. `mail_location` is left empty, and userdb is specified using SQL: user_query = SELECT uid AS uid, \ gid AS gid, \ homedir AS home, \ maildir AS mail \ FROM users WHERE email = '%u' Everything had been fine, until I added a new user. In the log, Dovecot complains that it doesn't have permission to create the mail directory (email address replaced): > Jan 2 05:46:19 mail1 dovecot: lda(test(a)test.com): Error: user > test(a)test.com: > Initialization failed: Initializing mail storage from mail_location > setting > failed: mkdir(mail) in directory /var/spool/postfix failed: Permission > denied > (euid=5000(virtual) egid=5000(virtual) missing +w perm: > /var/spool/postfix, > dir owned by 0:0 mode=0755) Sometimes it complains about /run/dovecot instead of /var/spool/postfix, but I think that doesn't really matter. I think not specifying `mail_location` confused Dovecot, as explained in [MailLocation][1]. When I put in the right value for `mail_location` the error went away. What I don't understand is, it is said in the [same document][1] that the userdb field `mail` will override `mail_location` anyway. I would think that I can skip `mail_location` if I specify userdb `mail` for all users. Is the document wrong? Thanks, Phu [1]: http://wiki2.dovecot.org/MailLocation -----BEGIN PGP SIGNATURE----- Version: OpenPGP.js v.1.20131017 Comment: http://openpgpjs.org wsFcBAEBCAAQBQJSxRknCRD8UQvv5Zm+EAAAj68P/iidn6jYSNlhLY2640Qg vPC9xg0lhH/LJLEMMK+oSDnOmF+Hjtm/IMctOVDiTnPfdbvoC9oE4RWnKlL0 /couQQHQKjh2L2mqN50buROjUQyR+pQXGNfVGS+jq74S30299/VnH+gWPUSV xYRb1i6wuKVGCCNRF3vJHZs1eCiEFKpvC4LUiI5yarclCUE4mCtRO97Iadu/ GTaXn3euy5/5dyZEiPvld5IcGJ0BMC5RJiHb89EpN7A5J+4MvlMNUdcPYgcF j+ilwsOCpchj1AfjLnosnpCJRysin8aYj9mxGC+gR2/fAIm242qBNrVpnLQM IjP8G1pKhxKzQx2jFnENvhTKaxDSIWva0u/CSxSiCE3Kepj1b39qsjFlM8k7 0/EzoWf1rxzy0kQQ1qNeoz1Ta93D2cWQkTj6AK6kVmtmt9iaqzjGU+n7w3ae n+hoYs19r8LnhqSrlAX/N10h7/B++SRJG81EUB4tJF+LtRknFJa1qyr7Guh/ mOieUupr9Ks5WlPYaZ77t61FZauI0bK716p+J5C/f75EdWMrUInVumGletk/ FIaILS6nhq+D6SvrqiVseKvhjc+6p4HoeNVotceus+yssNmkniey5j3Hs0H5 EPmmkAT+hNN5R0wcbj2LaErG3VQ6SGMdY/suIJQb1Aq08nymtVaA2mS8Tcnm Z+O+ =pqon -----END PGP SIGNATURE-----

1 0

[Dovecot] Wrong file accessed after file was renamed because of wrong size
by Rolf Eike Beer 01 Jan '14

01 Jan '14

I'm migrating from Courier-IMAP. On first access of folders I get this log (slightly anonymized): Jan 1 18:38:27 mail dovecot: imap(username): Error: Cached message size smaller than expected (1452 < 1668) Jan 1 18:38:27 mail dovecot: imap(username): Error: Maildir filename has wrong S value, renamed the file from /var/vpopmail/domains/domain/username/.maildir/cur/1206559119.14350.mail,S=1452:2,RS to /var/vpopmail/domains/domain/username/.maildir/cur/1206559119.14350.mail,S=1668:2,RS Jan 1 18:38:27 mail dovecot: imap(username): Error: Corrupted index cache file /var/vpopmail/domains/domain/username/.maildir/dovecot.index.cache: Broken physical size for mail UID 161 Jan 1 18:38:27 mail dovecot: imap(username): Error: read(/var/vpopmail/domains/domain/username/.maildir/cur/1206559119.14350.mail,S=1452:2,RS) failed: Invalid argument Jan 1 18:38:27 mail dovecot: imap(username): Disconnected: Internal error occurred. Refer to server log for more information. [2014-01-01 18:38:27] in=135 out=63515 This is the same in 2.2.6 and 2.2.10. Greetings, Eike

1 0

[Dovecot] How to add dovecot plugin?
by Timothy Murphy 31 Dec '13

31 Dec '13

I'm running dovecot version 2.0.9 under CentOS-6.5 . I want to add the following plugin: ==================== require "fileinto"; if header :contains "X-Spam-Flag" "YES" { fileinto "Spam"; } ==================== Could some kind soul tell me where exactly I should place this script (eg "anywhere in /etc/dovecot/dovecot.conf" or "anywhere in /etc/dovecot/conf.d/90-plugin.conf"), and do I need to take any other action? Actually, the folder I should like spam to go to is ~/Maildir/.Spam/cur/ - should I modify the above script? If these queries are anwered clearly in some dovecot documentation, please point me to that. -- Timothy Murphy e-mail: gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin 2, Ireland

2 1

Re: [Dovecot] pop3 rate limit
by michael 30 Dec '13

30 Dec '13

On 2013-12-29 02:05, Christian Rößner wrote: > Hi, > > we have customers with Exchange servers that are polling for new mail > every minute with dozens of pop3 accounts. I am looking for a > mechanism to rate limit this per user. So what I am looking for is a > way to block users from polling, if a user asks for new mail more > than > every 5 minutes (for example). > > Is this possible? Can this be achieved within Dovecot or does it need > external scripting? (I thought about fail2ban, but also want IPv6 > support) > > Thanks in advance > > -Christian Rößner See: www.policyd.org You'll need to use v2.1 to get IPV6 support. Michael Hallager

6 10

[Dovecot] Warning: fscking index file /.../dovecot.index
by Alex Vitola 30 Dec '13

30 Dec '13

We have often found the below error in VPS servers using OpenVZ, and some cases using OpenStack, in neither case is used for storage or sharing ISCSI or NFS Client can not receive messages via POP3 or IMAP In /var/log/maillog the message below is seen Oct 31 15:28:26 vps dovecot: pop3(user(a)domain.com): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0 [0x2b3718e07400] -> /usr/lib64/dovecot/libdovecot.so.0 [0x2b3718e07456] -> /usr/lib64/dovecot/libdovecot.so.0 [0x2b3718e06df3] -> /usr/lib64/dovecot/libdovecot-storage.so.0 [0x2b3718b6566b] -> /usr/lib64/dovecot/libdovecot-storage.so.0(mail_index_sync_commit+0x89) [0x2b3718b5ced9] -> /usr/lib64/dovecot/libdovecot-storage.so.0 [0x2b3718aeae4d] -> /usr/lib64/dovecot/libdovecot-storage.so.0 [0x2b3718aea357] -> /usr/lib64/dovecot/libdovecot-storage.so.0 [0x2b3718aea698] -> /usr/lib64/dovecot/libdovecot-storage.so.0(maildir_storage_sync_init+0xbb) [0x2b3718aea83b] -> /usr/lib64/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x31) [0x2b3718b15e31] -> /usr/lib64/dovecot/libdovecot-storage.so.0(mailbox_sync+0x27) [0x2b3718b18537] -> dovecot/pop3(client_create+0x332) [0x405702] -> dovecot/pop3 [0x40414b] -> dovecot/pop3 [0x404708] -> /usr/lib64/dovecot/libdovecot.so.0 [0x2b3718dc9a52] -> /usr/lib Both POP3 as IMAP Oct 31 15:24:42 vps dovecot: imap(user(a)domain.com): Warning: fscking index file /home/user/mail/domain.com/user/dovecot.index Oct 31 15:28:26 vps dovecot: pop3(user(a)domain.com): Warning: fscking index file /home/user/mail/domain.com/user/dovecot.index Today I do to solve this the procedure below - Access the directory mailbox - Remove files dovecot.index * - Run the command doveadm index-u $ user @ $ domain-q INBOX The question is for what reason this only occurs with VPS servers, I do not find this error on any single physical server to virtual and dovecot settings are the same. att Alex Vitola

1 0

[Dovecot] dovecot 2.2.10 - imap: Error: Can't load plugin imap_stats_plugin:
by giovanni＠neweden.uk.to 30 Dec '13

30 Dec '13

dovecot 2.2.10 is raising this error on my installation. Dec 30 13:57:59 imap: Error: Can't load plugin imap_stats_plugin: Plugin stats must be loaded also (you must set: mail_plugins=$mail_plugins stats) Dec 30 13:57:59 imap: Fatal: Couldn't load required plugins This error occurs at logging phase. The dovecot configuration looks correct to me, here below an excerpt of it: ... ... mail_plugins=$mail_plugins stats protocol imap { mail_plugins = $mail_plugins imap_stats } plugin { # how often to session statistics stats_refresh = 30 secs # track per-IMAP command statistics stats_track_cmds = yes } ... ... I was already using this configuration but only now I am getting this error. From STRACE I see that the stat plugin is correctly localed . Is anybody else getting this error? or am I missing something? Here below an except of the strace message. [pid 17112] open("/usr/local/lib/dovecot/lib95_imap_stats_plugin.so", O_RDONLY) = 14 [pid 17112] read(14, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0`\t\0\0004\0\0\0"..., 512) = 512 [pid 17112] fstat64(14, {st_mode=S_IFREG|0755, st_size=53122, ...}) = 0 [pid 17112] mmap2(NULL, 8908, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 14, 0) = 0xf7609000 [pid 17112] mmap2(0xf760b000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 14, 0x1) = 0xf760b000 [pid 17112] close(14) = 0 [pid 17112] open("/usr/local/lib/dovecot/lib90_stats_plugin.so", O_RDONLY) = 14 [pid 17112] read(14, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@\24\0\0004\0\0\0"..., 512) = 512 [pid 17112] fstat64(14, {st_mode=S_IFREG|0755, st_size=100054, ...}) = 0 [pid 17112] mmap2(NULL, 20320, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 14, 0) = 0xf7604000 [pid 17112] mmap2(0xf7608000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 14, 0x3) = 0xf7608000 [pid 17112] close(14) = 0 [pid 17112] write(2, "\1\01017112 prefix=imap: \n", 22) = 22 [pid 17112] write(2, "\1\00417112 Can't load plugin imap_s"..., 127) = 127 [pid 17112] munmap(0xf7609000, 8908) = 0 [pid 17112] munmap(0xf7604000, 20320) = 0 [pid 17112] write(2, "\1\00517112 Couldn't load required p"..., 39) = 39 [pid 17112] exit_group(89) = ? Process 17112 detached

2 2

[Dovecot] dsync-local crashes due to assertion failures
by Fabian Groffen 30 Dec '13

30 Dec '13

Hi, I have two servers that share nothing, running dovecot version 2.2.9. The first server hosts the original mail base, which I want to sync using dovecot to the second server. With some trial and error I managed to get synchronisation running using tcp sockets. Now for some accounts I see dsync-local crashing on the server that has the original mail base (which is still the only of the two that receives new mail). The log shows: Dec 8 03:13:14 zeus dovecot: dsync-local(someuser): Panic: file mail-index-tr ansaction-export.c: line 203 (log_append_ext_hdr_update): assertion failed: (u32 .offset + u32.size <= ext_hdr_size) Dec 8 03:13:14 zeus dovecot: dsync-local(someuser): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0x70ea0) [0x7f3ee4137ea0] -> /usr/lib64/dovecot/libdovecot.so.0(+0x70efe) [0x7f3ee4137efe] -> /usr/lib64/dovecot/libdovecot.so.0(i_fatal+0) [0x7f3ee40ebd2c] -> /usr/lib64/dovecot/libdovecot-storage.so.0(mail_index_transaction_export+0xbed) [0x7f3ee442e89d] -> /usr/lib64/dovecot/libdovecot-storage.so.0(+0x89104) [0x7f3ee442d104] -> /usr/lib64/dovecot/libdovecot-storage.so.0(mail_index_transaction_commit_full+0xb2) [0x7f3ee442d592] -> /usr/lib64/dovecot/libdovecot-storage.so.0(mail_index_transaction_commit+0xc) [0x7f3ee442d63c] -> /usr/lib64/dovecot/libdovecot-storage.so.0(mail_index_sync_commit+0xb6) [0x7f3ee44372b6] -> /usr/lib64/dovecot/libdovecot-storage.so.0(+0x335d6) [0x7f3ee43d75d6] -> /usr/lib64/dovecot/libdovecot-storage.so.0(+0x328bc) [0x7f3ee43d68bc] -> /usr/lib64/dovecot/libdovecot-storage.so.0(+0x32d83) [0x7f3ee43d6d83] -> /usr/lib64/dovecot/libdovecot-storage.so.0(maildir_storage_sync_init+0xd9) [0x7f3ee43d7199] -> /usr/lib64/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x2e) [0x7f3ee43e7f2e] -> /usr/lib64/dovecot/libdovecot-storage.so.0(mailbox_sync+0x27) [0x7f3ee43e8047] -> dovecot/doveadm-server(dsync_brain_master_send_mailbox+0xcf) [0x41f17f] -> dovecot/doveadm-server(dsync_brain_run+0x2c8) [0x41d738] -> dovecot/doveadm-server() [0x41dd70] -> dovecot/doveadm-server() [0x42eda0] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x7f3ee41495a6] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run+0xbd) [0x7f3ee414a62d] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7f3ee4149008] -> dovecot/doveadm-server() [0x41bb6c] -> dovecot/doveadm-server() [0x40ee3b] -> dovecot/doveadm-server() [0x419581] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x7f3ee41495a6] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run+0xbd) [0x7f3ee414a62d] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7f3ee4149008] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f3ee40f1643] Dec 8 03:13:14 zeus dovecot: dsync-local(someuser): Fatal: master: service(doveadm): child 14116 killed with signal 6 (core dumps disabled) It seems that despite these crashes, some data is being transferred. Newer accounts seem not to have problems, this happens with older accounts only, for as far as I can see. I tried removing the index files, but that didn't seem to help. Any ideas on what I can do here? Both servers are configured to use maildir storage. Thanks, Fabian -- Fabian Groffen Gentoo on a different level

1 1

[Dovecot] pop3 rate limit
by Christian Rößner 30 Dec '13

30 Dec '13

Hi, we have customers with Exchange servers that are polling for new mail every minute with dozens of pop3 accounts. I am looking for a mechanism to rate limit this per user. So what I am looking for is a way to block users from polling, if a user asks for new mail more than every 5 minutes (for example). Is this possible? Can this be achieved within Dovecot or does it need external scripting? (I thought about fail2ban, but also want IPv6 support) Thanks in advance -Christian Rößner -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein

2 1

[Dovecot] Sieve's spamtest always returns 0
by martin f krafft 28 Dec '13

28 Dec '13

I am a bit at a loss here with Sieve (pigeonhole) and the spamtest extension. I am using Dovecot 2.1.7 (backported to Debian squeeze), which comes with Pigeonhole 0.3.0. Messages are scanned with SpamAssassin, which adds a header like X-Spam-Status: Yes, score=84.6 required=5.0 tests=… and so I configured spamtest in conf.d/90-plugin.conf like so: sieve_spamtest_status_type = score sieve_spamtest_status_header = X-Spam-Status: [^,]*, score=(-?[[:digit:]]+\.[[:digit:]]).* sieve_spamtest_max_header = X-Spam-Status: [^,]*, score=[^[:space:]]+ required=(-?[[:digit:]]+\.[[:digit:]]).* I tested those regular expressions with sed -r, e.g. % sed -rne "s@^X-Spam-Status: [^,]*, score=-?[[:digit:]]+\.[[:digit:]] required=(-?[[:digit:]]+\.[[:digit:]]).*@\1@p" mailfile 5.0 and they work. Unfortunately, in sieve scripts, the spamtest value is always 0, which is indicative of the spamtest "not having run", which in this case I assume means that the regular expression didn't match. Am I right in assuming that the matching happens at the time of evaluation, and so adding the headers using vnd.dovecot.filter just before works? Or does the spamtest matching happen before the sieve scripts are executed? Can you see any other reason why spamtest always yields a value of 0? Thanks, -- martin | http://madduck.net/ | http://two.sentenc.es/ "those who are faithful know only the trivial side of love: it is the faithless who know love's tragedies." -- oscar wilde spamtraps: madduck.bogus(a)madduck.net

3 4

[Dovecot] Dovecot 'Submission' service?
by Charles Marcus 27 Dec '13

27 Dec '13

I do recall this being discussed, but I can't remember if it is actually in a working state now or not. According to the wiki, it is a work in progress: http://wiki2.dovecot.org/Roadmap?highlight=%28submission%29 So - is it in a functional state yet? Thanks, -- Best regards, */Charless/***

2 2

[Dovecot] Using DSync to convert from maildir to m/sdbox during migration of mail to new server
by Charles Marcus 27 Dec '13

27 Dec '13

Ok, now to work out the precise method (config for the target server and dsync command) to use to perform the migration from the old server to the new one, converting to dbox (s or m, depending on how the other thread discussing this turns out). I'll update the old server to 2.2.10 tomorrow morning so they're both at the same version. So, assuming both servers are running 2.2.10, with OldServer: mail_location = maildir:~/:INDEX=MEMORY and NewServer: mail_location = sdbox:~/sdbox or mail_location = mdbox:~/mdbox After reading and re-reading: http://wiki2.dovecot.org/Tools/Dsync I'm not so sure... First problem - apparently it can only be used one user at a time? And - do you have to actually know the users password too? If so, then this probably isn't going to be easier, and maybe even harder than just rsyncing everything, then slowly converting each user one at a time. -- Best regards, */Charles/*

1 0

[Dovecot] Migrating from Maildir to dbox+SIS... sdbox or mdbox?
by Charles Marcus 27 Dec '13

27 Dec '13

Ok... Now that I've got the niggling issues resolved, on to bigger and better things. I want to convert everyone from Maildir to dbox and enable SIS (our users use a lot of large attachments), and after some reading/googling, I think it may be better to use dsync instead of rsync for the actual migration after all since it will do this at the same time as the syncing. If I'm not mistaken, once I've figured out the correct syntax for the command, I should be able to do the conversion and migration at the same time. So, that is what I want to do, but I still have to choose between sdbox and mdbox. I tend to feel a little safer with sdbox, just because it seems more stable - and I like the idea that if a file gets corrupted somehow, then it is only that one mail that may potentially be lost, but if mdbox indexes get corrupted, you are guaranteed to lose messages (maybe a lot)... But I also really like the idea of an order of magnitude fewer actual files (would make rsync based backups much faster, etc). Timo - the last comments I was able to find from you were back in 2011... would you mind commenting on the current stated of dbox - especially mdbox, as far as reliability goes? The 'scary warnings' about how important the index files are ... well ... scares me... ;) I know there were definitely some issues with mdbox a few years ago - I found the old thread from 2011, but nothing substantial since, so... So... are there any people here, especially larger installs, using mdbox? sdbox? I'd especially be interested in hearing from anyone who has used both, and picked one over the other, and their reasons for doing so. Thanks, -- Best regards, */Charles/*

1 0

[Dovecot] Enabling SIS (single instance storage)
by Charles Marcus 27 Dec '13

27 Dec '13

Ok, didn't find much on this... The bottom of /etc/dovecot/conf.d/10-mail.conf has the following settings: #mail_attachment_dir = #mail_attachment_min_size = 128k #mail_attachment_fs = sis posix #mail_attachment_hash = %{sha1} all of which are apparently the defaults according to doveconf -d output - so no need to set them explicitly, unless I want to change them, right? So, enable the first one - but - the comments don't say anything about supporting variables. I'm assuming you can, otherwise all attachments for all domains would be in a single directory, which some admins might not like (I wouldn't)... so hopefully I can just set it to this: mail_attachment_dir = /var/vmail/%d/.attachments So how does this work during conversion? Users still on maildir simply don't engage it? But as users are converted to dbox, all attachments are de-duped, and then new mails coming in with attachments (for converted users) are de-duped at delivery? The wiki could do with a bit more on enabling and implementing it, especially what to expect when enabling it for the first time on a production system and what to expect along the way when converting existing users... -- Best regards, */Charles/*

1 0

[Dovecot] mail_location, user 'home', questions
by Charles Marcus 27 Dec '13

27 Dec '13

Hi all, Ok, another question... I always like changes to the default settings whenever possible (KISS principle)... So, according to the dovecot wiki, the default location for a maildir setup is: mail_location = maildir:~/Maildir However, when I first tried to access mail on the new box, something wasn't right, and I ended up having to change this to: mail_location = maildir:~ to get mail to display correctly. The filesystem for a users maildir currently has everything (cur/new/tmp, and the individual folders) inside that users directory, ie: /var/vmail/example.com/user/ Do I need to change this so that everything is under a 'Maildir' subdirectroy inside the users directory, like: /var/vmail/example.com/user/Maildir/ ? Also, I'm aware that it is important that even virtual users have valid 'homes', but I'm confused as to where these are (or are supposed to be) by default. My sql query currently contains: user_query = \ SELECT CONCAT('/var/vmail/', maildir) AS home \ FROM mailbox WHERE username = '%u' iterate_query = SELECT username AS user FROM mailbox So... what exactly is this saying? That the users 'home' is '/var/vmail'? Or does it automatically append %d/%u? I'm specifically wondering if the intention for the defaults is for the users home to be: /var/vmail/example.com/user and the users maildirs to be in: /var/vmail/example.com/user/Maildir Would appreciate some clarification... It wouldn't be hard to mv all of the users maildirs to a Maildir subfolder after the sync, but I want to know for sure that that is what I should/need to do... Thanks, -- Best regards, */Charles/*

1 1

[Dovecot] dovecot-postfix stack imap_client_workarounds
by thufir 27 Dec '13

27 Dec '13

To use dovecot-postfix stack with thunderbird, do I put the configuration into /usr/share/dovecot/protocols.d/impad.protocol? That would seem to be how the stack is configured. "Thunderbird To use with Thunderbird, edit the file /etc/dovecot/dovecot.conf: protocol imap { ... login_greeting_capability = yes imap_client_workarounds = tb-extra-mailbox-sep }" https://help.ubuntu.com/community/Dovecot thufir@dur:~$ thufir@dur:~$ cat /usr/share/dovecot/protocols.d/imapd.protocol protocols = $protocols imap thufir@dur:~$ thufir@dur:~$ dovecot -n # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.5.0-44-generic i686 Ubuntu 12.04.3 LTS mail_location = maildir:~/Maildir managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap pop3 sieve service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 10 } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { deliver_log_format = msgid=%m: %$ mail_plugins = sieve postmaster_address = postmaster quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } thufir@dur:~$ thufir@dur:~$ thanks, Thufir

2 1

[Dovecot] Thunderbird message cache out of sync after repetitive rsyncs...
by Charles Marcus 27 Dec '13

27 Dec '13

Ok, hopefully there is a solution to this. I've been experimenting with multiple rsyncs in preparation for pulling the trigger on the mail server switch, but have a problem that I really want to fox before doing so. Apparently something causes Thunderbirds local message cache to get out of sync with dovecot after a sync. Here is the series of commands I'm running: 1. stop postfix, stop dovecot on new server 2. rsync -rltgovDHP --delete --exclude-from 'excludes.txt' /path/to/vmail/example.com/ /var/vmail/example.com/ 3. chown vmail:vmail /var/vmail 4. start dovecot, start postfix ls -al /var/vmail/example.com/user/cur shows all of the messages that should be there, and all perms are correct. Go to my account that is pointed to this mail server/account, and none of the new messages show up. Also, some messages are still showing up that shouldn't. I've tried compacting the folders, closing/relaunching Thunderbird, but nothing helps. The only way to get them to show up is to go to the local Thunderbird cache for the account, and delete the files associated with the folder having the problem. The problem is, ALL folders will have this problem, which means that everyone will need to delete ALL of their local cahced folders. This will be a major support problem. Anyone have any ideas? -- Best regards, */Charles/*

5 16

[Dovecot] Server Migration Attempt - new messages DELETED after secondary rsyncs
by Charles Marcus 27 Dec '13

27 Dec '13

Starting a new thread, as I've got a lot more details now... First, I know this may be (or is even likely) something weird happening with Thunderbird, but the bottom line is, I have to find a resolution or a workaround or something, or I will be unable to pull the trigger on the server migration. It is simply unacceptable to lose ANY mails doing this. Goal: migrate mailstore from old server to new server using rsync Thunderbird (24.2) is set up to access the new account for testing Problem: after rsync, ls shows new messages (11 for the 27th), but when Thunderbird accesses the maildir again after another rsync, MOST (but not all) of the new messages are deleted (only one for the 27th remains) Timo - I'd be happy to do anything necessary to track this down if you'll just tell me what you need... Note: if you are pretty confident that upgrading dovecot on the old server and using dsync to do the migration will solve the problem, obviously I'm willing to do that if there is no other choice, but... I hope you'll want to get to the bottom of this regardless, as, according to you and everything I've read, it should work without losing any emails... Ok, as to details... Source (ol/active server): dovecot 2.1.17, postfix virtual for delivery, vmail owned by postfix:postfix Note: using prefix=INBOX. courier compatibility namespace Target: dovecot 2.2.10, dovecot LDA, vmail owned by vmail:vmail, nothing being actively delivered (yet) Note: NOT using prefix=INBOX. courier compatiblity namespace Both doveconf -n outputs at end of this message *** Could the different namespaces, or differing dovecot versions cause this? Current /snapshot/ being used was taken at about 3:48am this morning rsync command (dovecot is STOPPED before performing, source is the latest snapshot of the active server): rsync -rltgovDHP --delete --delete-excluded --exclude-from '/path/to/excludes.txt' /snapshot/.../vmail/example.com/user/ /.../vmail/example.com/user/ I'm only syncing the one user until I get this problem resolved as it is faster. excludes.txt contains only (just to eliminate these which are still on the source): courierimap* Right after the rsync: ls -al /.../user (changes depending on what is in includes.txt) -rw------- 1 vmail vmail 51 Dec 18 10:13 dovecot-keywords -rw------- 1 vmail vmail 221638 Dec 27 02:42 dovecot-uidlist -rw------- 1 vmail vmail 8 Dec 18 09:56 dovecot-uidvalidity -r--r--r-- 1 vmail vmail 0 Jun 9 2012 dovecot-uidvalidity.4fd32805 ls -al /.../user/cur (copy/pasted newest thru 12/25 - this list is always the same after a sync) -rw------- 1 vmail vmail 24904 Dec 25 15:47 1388004452.Vfe02Ic72976M281736.oldhost.example.com:2, -rw------- 1 vmail vmail 5825360 Dec 25 22:52 1388029948.Vfe02Ic7306fM556006.oldhost.example.com:2, -rw------- 1 vmail vmail 27718 Dec 26 02:19 1388042391.Vfe02Ic33b40M543019.oldhost.example.com:2, -rw------- 1 vmail vmail 28083 Dec 26 07:11 1388059893.Vfe02Ic76388M193423.oldhost.example.com:2,S -rw------- 1 vmail vmail 100651 Dec 26 08:02 1388062961.Vfe02Ic763c2M415005.oldhost.example.com:2, -rw------- 1 vmail vmail 5286 Dec 26 09:41 1388068882.Vfe02Ic7642dM83715.oldhost.example.com:2,S -rw------- 1 vmail vmail 53203 Dec 26 09:55 1388069721.Vfe02Ic7646fM716189.oldhost.example.com:2,S -rw------- 1 vmail vmail 12039 Dec 26 12:48 1388080111.Vfe02Ic76742M972942.oldhost.example.com:2,RS -rw------- 1 vmail vmail 13531 Dec 26 13:14 1388081648.Vfe02Ic7674cM68343.oldhost.example.com:2,S -rw------- 1 vmail vmail 25161 Dec 26 15:47 1388090846.Vfe02Ic768acM489505.oldhost.example.com:2, -rw------- 1 vmail vmail 5037 Dec 26 16:27 1388093257.Vfe02Ic76918M766778.oldhost.example.com:2, -rw------- 1 vmail vmail 3157 Dec 26 17:01 1388095312.Vfe02Ic76997M703744.oldhost.example.com:2, -rw------- 1 vmail vmail 22480 Dec 26 17:50 1388098239.Vfe02Ic769deM225078.oldhost.example.com:2, -rw------- 1 vmail vmail 10043 Dec 26 19:59 1388105984.Vfe02Ic76a25M12505.oldhost.example.com:2, -rw------- 1 vmail vmail 10635 Dec 26 21:11 1388110298.Vfe02Ic76a65M649895.oldhost.example.com:2, -rw------- 1 vmail vmail 8695 Dec 26 21:11 1388110319.Vfe02Ic76a6fM696948.oldhost.example.com:2, -rw------- 1 vmail vmail 11045 Dec 26 21:56 1388112965.Vfe02Ic76a57M185504.oldhost.example.com:2, -rw------- 1 vmail vmail 823 Dec 26 22:40 1388115600.Vfe02Ib61cf5M913598.oldhost.example.com:2,ST -rw------- 1 vmail vmail 815 Dec 26 22:40 1388115627.Vfe02Ib63443M811945.oldhost.example.com:2,ST -rw------- 1 vmail vmail 785 Dec 26 22:40 1388115628.Vfe02Ib659c9M617314.oldhost.example.com:2,ST -rw------- 1 vmail vmail 6156 Dec 27 00:05 1388120705.Vfe02Ib7aa31M58188.oldhost.example.com:2,ST -rw------- 1 vmail vmail 869 Dec 27 00:05 1388120713.Vfe02Ib8506aM185504.oldhost.example.com:2,ST -rw------- 1 vmail vmail 925 Dec 27 00:29 1388122155.Vfe02Ibb2a1fM764275.oldhost.example.com:2,ST -rw------- 1 vmail vmail 823 Dec 27 00:38 1388122687.Vfe02Ic2f69aM168075.oldhost.example.com:2,ST -rw------- 1 vmail vmail 801 Dec 27 00:38 1388122696.Vfe02Ic31befM507147.oldhost.example.com:2,ST -rw------- 1 vmail vmail 801 Dec 27 00:38 1388122709.Vfe02Ic3ac2bM981625.oldhost.example.com:2,ST -rw------- 1 vmail vmail 4576 Dec 27 00:57 1388123820.Vfe02Ic769e8M270744.oldhost.example.com:2,ST -rw------- 1 vmail vmail 8379 Dec 27 01:33 1388126003.Vfe02Ib7fd87M510118.oldhost.example.com:2,ST -rw------- 1 vmail vmail 27647 Dec 27 02:20 1388128838.Vfe02Ic7610fM483481.oldhost.example.com:2, -rw------- 1 vmail vmail 6373 Dec 27 02:42 1388130144.Vfe02Ic76a99M631316.oldhost.example.com:2,ST -rw------- 1 vmail vmail 3906 Dec 27 03:01 1388131281.Vfe02Ic76a9cM599830.oldhost.example.com:2,ST Start dovecot, select INBOX in Thunderbird for this account, it only displays these (I got this ls output from AFTER the messages in the cur directory are deleted per below - before doing any of the 3 aqctions below, ALL of the messages show in the ls output): ls -al /.../user/cur -rw------- 1 vmail vmail 24904 Dec 25 15:47 1388004452.Vfe02Ic72976M281736.oldhost.example.com:2, -rw------- 1 vmail vmail 5825360 Dec 25 22:52 1388029948.Vfe02Ic7306fM556006.oldhost.example.com:2, -rw------- 1 vmail vmail 27718 Dec 26 02:19 1388042391.Vfe02Ic33b40M543019.oldhost.example.com:2, -rw------- 1 vmail vmail 28083 Dec 26 07:11 1388059893.Vfe02Ic76388M193423.oldhost.example.com:2,S -rw------- 1 vmail vmail 100651 Dec 26 08:02 1388062961.Vfe02Ic763c2M415005.oldhost.example.com:2, -rw------- 1 vmail vmail 5286 Dec 26 09:41 1388068882.Vfe02Ic7642dM83715.oldhost.example.com:2,S -rw------- 1 vmail vmail 53203 Dec 26 09:55 1388069721.Vfe02Ic7646fM716189.oldhost.example.com:2,S -rw------- 1 vmail vmail 12039 Dec 26 12:48 1388080111.Vfe02Ic76742M972942.oldhost.example.com:2,RS -rw------- 1 vmail vmail 13531 Dec 26 13:14 1388081648.Vfe02Ic7674cM68343.oldhost.example.com:2,S -rw------- 1 vmail vmail 25161 Dec 26 15:47 1388090846.Vfe02Ic768acM489505.oldhost.example.com:2, -rw------- 1 vmail vmail 5037 Dec 26 16:27 1388093257.Vfe02Ic76918M766778.oldhost.example.com:2, -rw------- 1 vmail vmail 3157 Dec 26 17:01 1388095312.Vfe02Ic76997M703744.oldhost.example.com:2, -rw------- 1 vmail vmail 22480 Dec 26 17:50 1388098239.Vfe02Ic769deM225078.oldhost.example.com:2, -rw------- 1 vmail vmail 10043 Dec 26 19:59 1388105984.Vfe02Ic76a25M12505.oldhost.example.com:2, -rw------- 1 vmail vmail 10635 Dec 26 21:11 1388110298.Vfe02Ic76a65M649895.oldhost.example.com:2, -rw------- 1 vmail vmail 8695 Dec 26 21:11 1388110319.Vfe02Ic76a6fM696948.oldhost.example.com:2, -rw------- 1 vmail vmail 11045 Dec 26 21:56 1388112965.Vfe02Ic76a57M185504.oldhost.example.com:2, -rw------- 1 vmail vmail 27647 Dec 27 02:20 1388128838.Vfe02Ic7610fM483481.oldhost.example.com:2, This is weird, because it does show ONE new message from the 27th. And again, ls -al on the cur dir at this point still shows ALL of the messages (11 for the 27th, and 18 for the 26th) shown in the FIRST ls output, ABOVE this second listing (which is shown only to show you what Thunderbird is seeing, and what shows in the ls output AFTER doing any of the 3 actions below). Now... Doing ANY of the following results in MOST (BUT NOT ALL) OF THE NEW MESSAGES BEING DELETED ON THE SERVER - ie, ls -al output changes to the match what is immediately above (what was showing in Thunderbird right after selecting the Inbox right after the rsync). 1. Right-click on the Inbox > Properties > Repair Folder (in Thunderbird) 2. Right-click on INBOX > Compact (in Thunderbird) 3. Manually deleting the .msf file for the INBOX Obviously, I must find a resolution for this before I can pull the trigger on this migration. ************************************************************************ old server dovecon -n: oldhost : Fri Dec 27, 05:59:12 : ~ # doveconf -n # 2.1.17: /etc/dovecot/dovecot.conf # OS: Linux 3.10.7-gentoo-r1 x86_64 Gentoo Base System release 2.2 auth_default_realm = example.com auth_mechanisms = plain login first_valid_uid = 207 last_valid_uid = 207 listen = * login_log_format_elements = user=<%u> method=%m rip=%r lport=%{lport} mpid=%e %c session=<%{session}> mail_gid = 207 mail_location = maildir:~/:INDEX=MEMORY mail_uid = 207 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = INBOX. separator = . } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap lmtp service auth-worker { user = $default_internal_user } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = postfix mode = 0600 user = postfix } } service imap-login { service_count = 0 } service imap { process_limit = 2048 } ssl = required ssl_cert = </etc/ssl/myCerts/imap.pem ssl_key = </etc/ssl/myCerts/imap_key.pem userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol smtp { auth_verbose = yes } protocol lda { mail_plugins = sieve } protocol imap { mail_max_userip_connections = 20 } oldhost : Fri Dec 27, 08:22:04 : ~ ********************************************************** new server dovecot -n: host : Fri Dec 27, 08:13:34 : ~ # doveconf -n # 2.2.10: /etc/dovecot/dovecot.conf # OS: Linux 3.10.17-gentoo x86_64 Gentoo Base System release 2.2 auth_default_realm = example.com auth_mechanisms = plain login first_valid_uid = 200 last_valid_uid = 200 listen = * login_log_format_elements = user=<%u> method=%m %c rip=%r lport=%{lport} mail_gid = vmail mail_location = maildir:~ mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = . } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap lmtp service auth-worker { user = $default_internal_user } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } } service imap-login { service_count = 0 } service imap { process_limit = 2048 } ssl = required ssl_cert = </etc/ssl/myCerts/imap.pem ssl_key = </etc/ssl/myCerts/imap_key.pem userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol smtp { auth_verbose = yes } protocol lda { auth_verbose = yes mail_plugins = sieve } protocol imap { mail_max_userip_connections = 20 } host : Fri Dec 27, 08:19:59 : ~ -- Best regards, */Charles/*

3 4