- dovecot - dovecot.org

[Dovecot] First Installation, Problems...
by Jack Fredrikson 22 Oct '11

22 Oct '11

Hi; [root@example jack]# /usr/local/sbin/dovecot --version 2.0.15 [root@example jack]# /usr/local/bin/doveconf -n # 2.0.15: /usr/local/etc/dovecot/dovecot.conf doveconf: Warning: NOTE: You can get a new clean config file with: doveconf -n > dovecot-new.conf doveconf: Warning: Obsolete setting in /usr/local/etc/dovecot/dovecot.conf:5: imap_client_workarounds=outlook-idle is no longer necessary doveconf: Warning: Obsolete setting in /usr/local/etc/dovecot/dovecot.conf:17: add auth_ prefix to all settings inside auth {} and remove the auth {} section completely doveconf: Warning: Obsolete setting in /usr/local/etc/dovecot/dovecot.conf:21: passdb sql {} has been replaced by passdb { driver=sql } doveconf: Warning: Obsolete setting in /usr/local/etc/dovecot/dovecot.conf:24: userdb sql {} has been replaced by userdb { driver=sql } doveconf: Warning: Obsolete setting in /usr/local/etc/dovecot/dovecot.conf:27: userdb prefetch {} has been replaced by userdb { driver=prefetch } doveconf: Warning: Obsolete setting in /usr/local/etc/dovecot/dovecot.conf:29: auth_user has been replaced by service auth { user } # OS: Linux 2.6.18-028stab094.3 x86_64 CentOS release 5.4 (Final) vzfs auth_mechanisms = plain login mail_location = maildir:/var/vmail/%d/%u passdb { args = /usr/local/etc/dovecot/sql.conf driver = sql } plugin { quota = maildir:storage=10240:messages=1000 trash = /usr/local/etc/dovecot/trash.conf } service auth { unix_listener /var/run/dovecot/auth-master { group = mail mode = 0660 user = vmail } unix_listener /var/spool/postfix/private/auth { group = mail mode = 0660 user = postfix } user = nobody } ssl = no userdb { args = /usr/local/etc/dovecot/sql.conf driver = sql } userdb { driver = prefetch } protocol imap { imap_client_workarounds = delay-newmail mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { info_log_path = /var/log/dovecot-deliver.log log_path = /var/log/dovecot-deliver.log mail_plugins = quota postmaster_address = postmaster(a)creative.vi } It appears that I have postfix at least partially working: postfix/pipe[5280]: 9FDE0579012F: to=<uhuh(a)yup.com>, relay=spamfilter, delay=6, delays=3/0.01/0/3, dsn=2.0.0, status=sent (delivered via spamfilter service) I don't know where it ended up :-} There's nothing in /var/vmail, the dovecot destination. This is true even before I set the postfix content_filter to spamassassin (when it said "delivered to Maildir" or some such). Please advise. TIA, Jack

1 0

[Dovecot] Quota warning
by nuno marques 22 Oct '11

22 Oct '11

Hi, I cant run quota warning or other script. any suggestions? Oct 22 10:02:52 userseuac dovecot: imap(user4): Debug: Effective uid=1002, gid=1002, home=/home/user4 Oct 22 10:02:52 userseuac dovecot: imap(user4): Debug: Quota root: name=User quota backend=maildir args= Oct 22 10:02:52 userseuac dovecot: imap(user4): Debug: Quota rule: root=User quota mailbox=* bytes=10485760 messages=0 Oct 22 10:02:52 userseuac dovecot: imap(user4): Debug: Quota rule: root=User quota mailbox=Trash bytes=+1048576 messages=0 Oct 22 10:02:52 userseuac dovecot: imap(user4): Debug: Quota warning: bytes=9961472 (95%) messages=0 reverse=no command=script /etc/dovecot/conf.d/teste 95 user4 Oct 22 10:02:52 userseuac dovecot: imap(user4): Debug: Quota warning: bytes=8388608 (80%) messages=0 reverse=no command=script /etc/dovecot/conf.d/teste 80 user4 Oct 22 10:02:52 userseuac dovecot: imap(user4): Debug: Quota warning: bytes=7340032 (70%) messages=0 reverse=no command=script /etc/dovecot/conf.d/teste 70 user4 Oct 22 10:02:52 userseuac dovecot: imap(user4): Debug: maildir++: root=/home/user4/Maildir, index=, control=, inbox=/home/user4/Maildir, alt= # 2.0.14: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-71.29.1.el6.x86_64 x86_64 CentOS Linux release 6.0 (Final) auth_debug = yes auth_debug_passwords = yes auth_username_format = %Lu auth_verbose = yes disable_plaintext_auth = no mail_debug = yes mail_location = maildir:~/Maildir mail_plugins = " quota" mbox_write_locks = fcntl passdb { driver = pam } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid from subject size vsize flags quota = maildir:User quota quota_exceeded_message = Quota exceeded!!!!!!!!!!!!!! quota_rule = *:storage=10M quota_rule2 = Trash:storage=+1M quota_warning = storage=95%% script /etc/dovecot/conf.d/teste 95 %u quota_warning2 = storage=80%% script /etc/dovecot/conf.d/teste 80 %u quota_warning3 = storage=70%% script /etc/dovecot/conf.d/teste 70 %u } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = vmail } user = dovecot } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } protocol imap { mail_plugins = " quota imap_quota" } protocol pop3 { mail_plugins = " quota quota" pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } The system as a whole is composed of: dovecot-2.0.14-1_130.el6.x86_64 openldap-servers-2.4.19-15.el6_0.2.x86_64 postfix-2.6.6-2.1.el6_0.x86_64 mailscanner-4.84.3-1.noarch spamassassin-3.3.1-2.el6.x86_64 centos 6 2.6.32-71.29.1.el6.x86_64 #1 SMP Mon Jun 27 19:49:27 BST 2011 x86_64 x86_64 x86_64 GNU/Linux

1 0

[Dovecot] Quota fs
by nuno marques 22 Oct '11

22 Oct '11

Hi, I have the following error, any help? imap(user4): Error: quotactl(Q_GETQUOTA, /dev/mapper/VolGroup-lv_root) failed: Permission denied The system as a whole is composed of: dovecot-2.0.14-1_130.el6.x86_64 openldap-servers-2.4.19-15.el6_0.2.x86_64 postfix-2.6.6-2.1.el6_0.x86_64 mailscanner-4.84.3-1.noarch spamassassin-3.3.1-2.el6.x86_64 centos 6 2.6.32-71.29.1.el6.x86_64 #1 SMP Mon Jun 27 19:49:27 BST 2011 x86_64 x86_64 x86_64 GNU/Linux # 2.0.14: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-71.29.1.el6.x86_64 x86_64 CentOS Linux release 6.0 (Final) auth_username_format = %Lu disable_plaintext_auth = no mail_location = maildir:~/Maildir mail_plugins = " quota" mbox_write_locks = fcntl passdb { driver = pam } plugin { quota = fs:User quota quota_rule = *:storage=10M quota_rule2 = Trash:storage=+1M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=10%% quota-warning 10 %u } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = vmail } user = dovecot } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } protocol imap { mail_plugins = " quota imap_quota" } protocol pop3 { mail_plugins = " quota quota" pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv

1 0

[Dovecot] can not receive email upgrading from ubuntu 11.4 to 11.10
by Nikolaos Petronikolos 21 Oct '11

21 Oct '11

Dear all, I have the following error when i am sending an email to my email server postfix + dovecot. #5.3.0 x-unix; /usr/lib/dovecot/deliver: invalid option -- 'n' Usage: dovecot-lda [-c <config file>] [-a <address>] [-d <username>] [-p <path>] [-f <envelope sender>] [-m <mailbox>] [-e] [-k]> #SMTP# The problem occurred after i upgraded my server from ubuntu 11.4 to 11.10. i kindly ask you if you can help me thank you in advance for your kind attention. -- View this message in context: http://old.nabble.com/can-not-receive-email-upgrading-from-ubuntu-11.4-to-1… Sent from the Dovecot mailing list archive at Nabble.com.

2 2

[Dovecot] Don't Know Where Emails Are Or What's Happening
by Jack Fredrikson 21 Oct '11

21 Oct '11

Hi; I'm new to Dovecot and Postfix. I'm trying to enable these with MySQL support and postfixadmin. I've got all those services up and running (finally!); however, I can't figure out if the emails are being received and/or stored. I'm pretty sure Postfix is receiving them because I dealt with certain errors and they're now gone. Here's some data: Dovecot ver. 0.91 [root@example postfix]# /sbin/service dovecot -n doveconf: Warning: NOTE: You can get a new clean config file with: doveconf -n > dovecot-new.conf doveconf: Warning: Obsolete setting in /usr/local/etc/dovecot/dovecot.conf:5: imap_client_workarounds=outlook-idle is no longer necessary doveconf: Warning: Obsolete setting in /usr/local/etc/dovecot/dovecot.conf:17: add auth_ prefix to all settings inside auth {} and remove the auth {} section completely doveconf: Warning: Obsolete setting in /usr/local/etc/dovecot/dovecot.conf:21: passdb sql {} has been replaced by passdb { driver=sql } doveconf: Warning: Obsolete setting in /usr/local/etc/dovecot/dovecot.conf:24: userdb sql {} has been replaced by userdb { driver=sql } doveconf: Warning: Obsolete setting in /usr/local/etc/dovecot/dovecot.conf:27: userdb prefetch {} has been replaced by userdb { driver=prefetch } doveconf: Warning: Obsolete setting in /usr/local/etc/dovecot/dovecot.conf:29: auth_user has been replaced by service auth { user } Usage: /etc/init.d/dovecot {start|stop|reload|restart|force-reload} tail /var/log/maillog Oct 20 10:13:59 example postfix/smtpd[28141]: warning: problem talking to service rewrite: Success Oct 20 10:13:59 example postfix/master[4000]: warning: process /usr/libexec/postfix/trivial-rewrite pid 30178 exit status 1 Oct 20 10:13:59 example postfix/master[4000]: warning: process /usr/libexec/postfix/trivial-rewrite pid 30179 exit status 1 Oct 20 10:13:59 example postfix/smtpd[28458]: warning: problem talking to service rewrite: Success Oct 20 10:13:59 example postfix/master[4000]: warning: process /usr/libexec/postfix/trivial-rewrite pid 30180 exit status 1 Oct 20 10:13:59 example postfix/master[4000]: warning: process /usr/libexec/postfix/trivial-rewrite pid 30181 exit status 1 Oct 20 10:13:59 example postfix/smtpd[28483]: warning: problem talking to service rewrite: Success Oct 20 10:13:59 example postfix/smtpd[28460]: warning: problem talking to service rewrite: Success Oct 20 10:13:59 example postfix/master[4000]: warning: process /usr/libexec/postfix/trivial-rewrite pid 30182 exit status 1 Oct 20 10:13:59 example postfix/smtpd[28455]: warning: problem talking to service rewrite: Success Oct 20 10:13:59 example postfix/master[4000]: warning: process /usr/libexec/postfix/trivial-rewrite pid 30183 exit status 1 Oct 20 10:13:59 example postfix/smtpd[28484]: warning: problem talking to service rewrite: Success Oct 20 10:13:59 example postfix/master[4000]: warning: process /usr/libexec/postfix/trivial-rewrite pid 30184 exit status 1 Oct 20 10:13:59 example postfix/smtpd[29917]: warning: problem talking to service rewrite: Success Oct 20 10:13:59 example postfix/master[4000]: warning: process /usr/libexec/postfix/trivial-rewrite pid 30185 exit status 1 Oct 20 10:13:59 example postfix/smtpd[29953]: warning: problem talking to service rewrite: Success Oct 20 10:13:59 example postfix/master[4000]: warning: process /usr/libexec/postfix/trivial-rewrite pid 30186 exit status 1 Oct 20 10:13:59 example postfix/smtpd[28485]: warning: problem talking to service rewrite: Success Oct 20 10:13:59 example postfix/master[4000]: warning: process /usr/libexec/postfix/trivial-rewrite pid 30187 exit status 1 Oct 20 10:14:15 example postfix/smtpd[30152]: connect from unknown[66.248.165.32] Oct 20 10:14:15 example postfix/smtpd[30152]: lost connection after EHLO from unknown[66.248.165.32] Oct 20 10:14:15 example postfix/smtpd[30152]: disconnect from unknown[66.248.165.32] I also get this in there: Oct 20 10:13:15 example postfix/smtpd[30152]: warning: dict_nis_init: NIS domain name not set - NIS lookups disabled Oct 20 10:13:15 example postfix/smtpd[30152]: cannot load Certificate Authority data: disabling TLS support Oct 20 10:13:15 example postfix/smtpd[30152]: warning: TLS library problem: 30152:error:02001002:system library:fopen:No such file or directory:bss_file.c:122:fopen('/etc/pki/tls/c erts/cert.pem','r'): Oct 20 10:13:15 example postfix/smtpd[30152]: warning: TLS library problem: 30152:error:2006D080:BIO routines:BIO_new_file:no such file:bss_file.c:125: Oct 20 10:13:15 example postfix/smtpd[30152]: warning: TLS library problem: 30152:error:0B084002:x509 certificate routines:X509_load_cert_crl_file:system lib:by_file.c:279: Oct 20 10:13:15 example postfix/smtpd[30152]: connect from unknown[66.248.165.32] Oct 20 10:13:15 example postfix/smtpd[30152]: lost connection after EHLO from unknown[66.248.165.32] Oct 20 10:13:15 example postfix/smtpd[30152]: disconnect from unknown[66.248.165.32] Oct 20 10:13:57 example postfix/proxymap[28446]: warning: mysql query failed: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version f or the right syntax to use near '??gifteatszone.com??? AND active = 1' at line 1 Oct 20 10:13:57 example postfix/trivial-rewrite[30154]: fatal: proxy:mysql:/etc/postfix/mysql_virtual_alias_maps.cf(0,lock|fold_fix): table lookup problem Oct 20 10:13:57 example postfix/trivial-rewrite[30155]: fatal: proxy:mysql:/etc/postfix/mysql_virtual_alias_maps.cf(0,lock|fold_fix): table lookup problem Oct 20 10:13:57 example postfix/proxymap[28444]: warning: mysql query failed: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version f or the right syntax to use near '??awakelunch.info??? AND active = 1' at line 1 I reckon the failing of mysql inquiries just has to do with hackers trying to hack me. The TLS problem isn't mission-critical since it's just getting disabled. [root@example jack]# ps wax|grep dovecot 20223 ? Ss 0:00 /usr/local/sbin/dovecot 20224 ? S 0:00 dovecot/anvil 20225 ? S 0:00 dovecot/log 31832 ? S 0:00 dovecot/config 31833 ? S 0:00 dovecot/auth 31836 pts/2 S+ 0:00 grep dovecot [root@example jack]# ps wax|grep postfix 4000 ? Ss 0:01 /usr/libexec/postfix/master 31839 pts/2 S+ 0:00 grep postfix [root@example jack]# ps wax|grep postfixadmin 31842 pts/2 S+ 0:00 grep postfixadmin [root@example jack]# ps wax|grep saslauthd 16337 ? Ss 0:00 /usr/sbin/saslauthd -m /var/run/saslauthd -a pam -n 2 16338 ? S 0:00 /usr/sbin/saslauthd -m /var/run/saslauthd -a pam -n 2 25718 ? S 0:00 /usr/sbin/saslauthd -d -a pam 25719 ? S 0:00 /usr/sbin/saslauthd -d -a pam 25720 ? S 0:00 /usr/sbin/saslauthd -d -a pam 25721 ? S 0:00 /usr/sbin/saslauthd -d -a pam 25722 ? S 0:00 /usr/sbin/saslauthd -d -a pam 32052 pts/2 S+ 0:00 grep saslauthd I also tried this: First send a test mail to yourself (as your own non-root user): echo "Hello me" | mail -s "Dovecot test" $USER Now, find where the mail went. Here's a simple script which checks the most common locations: for mbox in /var/mail/$USER /var/spool/mail/$USER ~/mbox ~/mail/* ~/*; do grep -q "Dovecot test" $mbox && echo "mbox: $mbox" done grep -q "Dovecot test" ~/Maildir/new/* 2>/dev/null && echo "Maildir: ~/Maildir" and the mail was not found. This from my dovecot.conf file: mail_location = maildir:/var/vmail/%d/%u #but there's nothing there. ... auth default { # Having "login" also as a mechanism make sure outlook can use the auth smtpd as well # http://wiki.dovecot.org/Authentication/Mechanisms mechanisms = plain login passdb sql { args = /usr/local/etc/dovecot/sql.conf } userdb sql { args = /usr/local/etc/dovecot/sql.conf } userdb prefetch { } user = nobody socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = vmail group = mail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = mail } } } Telnetting to port 25 brings up Postfix, to port 110 brings up Dovecot TIA,Jack

2 6

[Dovecot] Quota
by nuno marques 21 Oct '11

21 Oct '11

hi, I'm having some difficulty understanding the connection between postfix, dovecot and quota. What is the best way to set up quotas? through the file system quota and maildir? Need the dovecot lda working? The postfix needs a patch? I was thinking about setting quotas on file system, then configure Postfix to connect to dovecot-lda. Any suggestion? The system as a whole is composed of:dovecot-2.0-0.10.beta6.20100630.el6.x86_64 -> 2.0.beta6 (3156315704ef)openldap-servers-2.4.19-15.el6_0.2.x86_64postfix-2.6.6-2.1.el6_0.x86_64mailscanner-4.84.3-1.noarchspamassassin-3.3.1-2.el6.x86_64centos 6 2.6.32-71.29.1.el6.x86_64 #1 SMP Mon Jun 27 19:49:27 BST 2011 x86_64 x86_64 x86_64 GNU/Linux

4 4

[Dovecot] Email filters
by Jos Chrispijn 21 Oct '11

21 Oct '11

Can someone tell me how I can configure Dovecot to use message filters on incoming email? When I now activate my mail account on my mobile phone and Thunderbird (or any other mail client with message filters) is not online, I get a huge pile of email in my INBOX that I have to go thru, while 90% is not that interesting to read as they belong to Spam messages, newsletters etc. Thanks in advance Jos Chrispijn

2 3

[Dovecot] Expire plugin not executing for sieve plugin?
by Dan Swartzendruber 20 Oct '11

20 Oct '11

Running dovecot 1.2.12 on ubuntu 10.10. Here is the problem: I have mysql backend for expire. I am using the dovecot-postfix package which creates /etc/dovecot/conf.d/01-mail-stack-delivery.conf which looks like this: # Some general options protocols = imap imaps managesieve disable_plaintext_auth = no ssl = yes ssl_cert_file = /etc/ssl/certs/ssl-mail.pem ssl_key_file = /etc/ssl/private/ssl-mail.key ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM mail_location = maildir:~/Maildir auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ # IMAP configuration protocol imap { mail_max_userip_connections = 10 imap_client_workarounds = outlook-idle delay-newmail mail_plugins = expire } # LDA configuration protocol lda { postmaster_address = postmaster mail_plugins = sieve expire quota_full_tempfail = yes deliver_log_format = msgid=%m: %$ rejection_reason = Your message to <%t> was automatically rejected:%n%r } # Plugins configuration plugin { sieve=~/.dovecot.sieve sieve_dir=~/sieve # If the user has no personal active script (i.e. if the file # indicated in sieve= does not exist), use this one: sieve_global_path = /var/lib/dovecot/sieve/default.sieve } The sieve is: require "fileinto"; require "imap4flags"; if header :contains "X-Spam-Flag" "YES" { setflag "\\Seen"; fileinto "SPAM"; stop; } Originally, this did not have the setflag or stop - I added them hoping to fix the problem, but no luck. The problem is this: when spam assassin has flagged a message as spam, the sieve runs and the message is in fact filed into the SPAM folder, but no expire entry is added to the database. If I move such a message from the SPAM folder to the Inbox and then back to SPAM, voila, I *do* get the entry created. Here is the mysql table before and after I did the move/move: mysql> select * from expires; +----------+---------------+--------------+ | username | mailbox | expire_stamp | +----------+---------------+--------------+ | dswartz | Deleted Items | 1319720163 | | dswartz | Sent | 1319120165 | | denise | Trash | 1319139920 | | samantha | Trash | 1319136146 | | denise | Sent | 1319655872 | | danielle | Sent | 1319192230 | | samantha | Sent | 1319268855 | | dswartz | Trash | 1319725884 | | samantha | SPAM | 1321504531 | +----------+---------------+--------------+ 9 rows in set (0.00 sec) mysql> select * from expires; +----------+---------------+--------------+ | username | mailbox | expire_stamp | +----------+---------------+--------------+ | dswartz | Deleted Items | 1319720163 | | dswartz | Sent | 1319120165 | | denise | Trash | 1319139920 | | samantha | Trash | 1319136146 | | denise | Sent | 1319655872 | | danielle | Sent | 1319192230 | | samantha | Sent | 1319268855 | | dswartz | Trash | 1319725884 | | samantha | SPAM | 1321504531 | | dswartz | SPAM | 1321714666 | +----------+---------------+--------------+ 10 rows in set (0.00 sec) It's almost like the fileinto stuff is not running the plugin code at all, or am I totally on drugs? If I can't get a fix for this, I at least now can think of a hack to "fix" it. e.g. every night, run a script that adds a "now" timestamp for everyone's SPAM folder to trick the periodic expire tool code into checking that folder, but obviously I'd rather have a real fix :) If this is just 'how it works', is it better in 2.0?

1 0

[Dovecot] too many open files and v1.2
by Michael Moritz 20 Oct '11

20 Oct '11

Hi I've found an older thread http://www.dovecot.org/list/dovecot/2010-March/047886.html which mentions that this is a bug in version 1. I'm on Debian squeeze (1:1.2.15-7) and got errors like these recently Oct 5 11:29:29 mail dovecot: dovecot: pipe() failed: Too many open files Oct 5 11:29:32 mail dovecot: dovecot: pipe() failed: Too many open files Oct 5 11:29:32 mail dovecot: dovecot: Temporary failure in creating login processes, slowing down for now As a work around I've increased login_max_processes_count from 256 to 512 and it seems to have helped (as I suspected stale opened files). My colleague thinks it's hitting the kernel open file limit ulimit -n (currently at 1024) but I don't see how that could happen if the number of process is nowhere near that. Any ideas? Thanks, Michael

2 2

[Dovecot] Is '*:bytes=" quota specification the quota 'Value', or 'Limit'?
by Rich 19 Oct '11

19 Oct '11

Docs for quota configuration http://wiki2.dovecot.org/Quota/Configuration#Limit_configuration state that the 'bytes=' specification defines the quota **LIMIT** "bytes: Quota limit in bytes, 0 means unlimited" as used in plugin { ... quota_rule = *:bytes=10000000 ... BUT, documentation for quota dict http://wiki2.dovecot.org/Quota/Dict states "MySQL uses the following queries to update the quota" and provides an SQL example of Dovecot decrementing the 'bytes' value, "UPDATE table SET bytes=bytes-14433,messages=messages-2 ..." I'm working on a current problem (http://dovecot.org/list/dovecot/2011-October/061538.html) with 'doveadm' reporting mixing up quote Value & Limit. Question: Is 'bytes' supposed to contain the Value, or the Limit? Rich

1 0

[Dovecot] 'doveadm quota get' dictionary SQL query ignores specified '@domain' part of username. bad config or bug?
by Rich 19 Oct '11

19 Oct '11

Hi, I'm setting up SQL quota usage in Dovecot2. I've created a MAILBOX parameter table, 'PARAMS', that contains unique <user>@<domain> pairs, with quota data. mysql> select * from PARAMS; +----+------------------------+------------+-------------+------------+ | ai | MAILBOX_user_domain | quota | quota_bytes | quota_msgs | +----+------------------------+------------+-------------+------------+ | 1 | myuser(a)domain1.com | 1073741824 | 0 | 0 | | 2 | myuser(a)domain2.com | 1000000000 | 0 | 0 | +----+------------------------+------------+-------------+------------+ 2 rows in set (0.00 sec) I've specified dict usage for quota, /etc/dovecot/dovecot.conf !include conf.d/*.conf protocols = imap lmtp dict { quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } created the maps, /etc/dovecot/dovecot-dict-sql.conf.ext connect = host=/var/run/mysql/mysql.sock dbname=my_db user=my_user password=my_pass map { pattern = priv/quota/storage table = PARAMS username_field = MAILBOX_user_domain value_field = quota_bytes } map { pattern = priv/quota/messages table = PARAMS username_field = MAILBOX_user_domain value_field = quota_msgs } assigned the global values and backend, /etc/dovecot/conf.d/90-quota.conf plugin { quota = dict:User Quota::proxy::quota quota_rule = *:storage=1GB:messages=10000 quota_rule2 = Trash:storage=+10%% } and specified the user iteration query /etc/dovecot/sql/virtmail-userdb-sql.cf driver = mysql connect = host=/var/run/mysql/mysql.sock dbname=my_db user=my_user password=my_pass user_query = CALL UserDBQuery('%n','%d'); iterate_query = SELECT `MAILBOX_user_domain` AS user FROM `PARAMS`; Verifying operation with with `doveadm`, I get a result from a !error query, doveadm quota get -u myuser(a)domain1.com Quota name Type Value Limit % User quota STORAGE 0 1048576 0 User quota MESSAGE 0 10000 0 doveadm quota get -u myuser(a)domain2.com Quota name Type Value Limit % User quota STORAGE 0 1048576 0 User quota MESSAGE 0 10000 0 But notice that there's no specificity by *domain*. Despite being provided the full <user>@<domain>, matched to the map, username_field = MAILBOX_user_domain the Dovecot dict query seems to ignore the <domain> part, and simply matches on the first of the tow identical <user> parts. Specifying "-A" doesn't help, doveadm quota get -A Username Quota name Type Value Limit % myuser(a)domain1.com User quota STORAGE 0 1048576 0 myuser(a)domain1.com User quota MESSAGE 0 10000 0 myuser(a)domain2.com User quota STORAGE 0 1048576 0 myuser(a)domain2.com User quota MESSAGE 0 10000 0 What needs to be done to get domain-specificity in the 'doveadm quota get' query? Is my configuration off, or incomplete, or is this a bug? Thanks, Rich

1 1

Re: [Dovecot] "doveadm log reopen" don't reopen separate lmtp log
by Henrik Larsson 18 Oct '11

18 Oct '11

I still see the issue below. Is there anyone running separate LMTP logging that could check if they experience the same issue? Best regards Henrik Larsson -------- Original Message -------- Subject: "doveadm log reopen" don't reopen separate lmtp log Date: Sun, 25 Sep 2011 00:23:49 +0200 From: Henrik Larsson <dovecot-user(a)spambox.dk> To: dovecot(a)dovecot.org Dear all I have setup separate pop3/imap log "/var/log/dovecot" and lmtp delivery log "/var/log/dovecot-deliver". After rotating logfiles, i run "doveadm log reopen". I see that my pop3/imap log "/var/log/dovecot" is used straight away, but my lmpt log "/var/log/dovecot-deliver" isn't used at first. After some time, usually a few minutes, logs are being written to this file anyway. But if I compare this to my maillog, it misses some deliveries just after the log rotation. Is there any problems with this configuration that should be corrected? --cut-- # doveconf -n # 2.0.15: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.2-STABLE amd64 auth_mechanisms = plain login digest-md5 cram-md5 first_valid_uid = 125 hostname = mail.larsson.it listen = * log_path = /var/log/dovecot mail_plugins = fts fts_squat zlib mail_privileged_group = postfix mail_temp_dir = /var/db/dovecot managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { inbox = yes location = prefix = separator = . type = private } namespace { hidden = yes inbox = no list = no location = prefix = INBOX. separator = . type = private } passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { fts = squat fts_squat = partial=4 full=10 sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap pop3 lmtp sieve service auth-worker { user = $default_internal_user } service auth { unix_listener /home/mail/postfix/private/auth { group = postfix mode = 0666 user = postfix } } service lmtp { executable = lmtp -L unix_listener /home/mail/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } ssl_cert = </etc/ssl/mail-chained.crt ssl_key = </etc/ssl/mail.key userdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lmtp { log_path = /var/log/dovecot-deliver mail_plugins = fts fts_squat zlib sieve } protocol lda { mail_plugins = fts fts_squat zlib sieve } protocol imap { mail_plugins = fts fts_squat zlib imap_zlib } --cut-- Best regards Henrik Larsson

2 3

[Dovecot] mail_location in LDAP and variables
by Joseba Torre 18 Oct '11

18 Oct '11

Hi, Is it posible to use variables in mail_location when taken from ldap? How? I've tried mdbox:/buzones2/'%n'/mdbox mdbox:/buzones2/"%n"/mdbox mdbox:/buzones2/%n/mdbox but %n is never replaced by its value. Thanks! -- Joseba Torre. Vicegerencia de TICs, área de Explotación

2 2

[Dovecot] LDA/Postfix with quotas and without LMTP
by Steve Fatula 18 Oct '11

18 Oct '11

Reading the wiki page for dovecot2 and LDA/Postfix, the system users section (all mail delivery goes to system users)... It shows you can simply use postfix mailbox_command. There is this additional comment: "This command doesn't do a userdb lookup. If you want that (e.g. for per-user quota lookups) you need to add -d "$USER" parameter." So, i added that. Once adding it, I find I get an error: dovecot: lda: Error: userdb lookup: connect(/var/run/dovecot/auth-userdb) failed: Permission denied Using mailbox_command in Postfix means that dovecot-lda is running as the system user getting the mail. Which means it can't access the socket file. Of course, one can simply use mode 666 on it, but, then people can use it to find out information according to the doc, which I do not want. So, I am not sure why the doc says to add -d for per user quotas, without also mentioning the problem with doing that. I don't see how it can work? Assuming I need per user quotas, and I don't want to use LMTP, is there a good way around this without the security issue? Steve

2 2

[Dovecot] Syntax to specify sdbox: mail_location path?
by mephistopheles＠operamail.com 18 Oct '11

18 Oct '11

I'm implementing sdbox. In conf.d/10-mail.conf, with "maildir:" mail_location = maildir:/my_mailbox_path/%d/%n mail gets stored in /my_mailbox_path/%d/%n/new/ With "sdbox:" mail_location = sdbox:/my_mailbox_path/%d/%n mail gets stored in /my_mailbox_path/%d/%n/mailboxes/INBOX/dbox-Mails. How do I get rid of the '/mailboxes/' and '/dbox-Mails/' path components so sdbox stores in: /my_mailbox_path/%d/%n/INBOX @ wiki2.dovecot.org/MailboxFormat/dbox#Alternate_storage points out that 'ALT=' can change the *lookup* location, and messages can be *moved* to ALT storage using 'doveadm altmove'. Unclear what TAGS are available/used for 'sdbox'.

2 1

[Dovecot] Rare error with concurrent users searching with fts-solr
by Antonio Perez-Aranda 18 Oct '11

18 Oct '11

Hi all, If I start two o more connections with diferent users that make a search text to solr I get this message many times: Error: fts_solr: Query didn't return uid If I repeat the test about 2000 times, with only one user concurrent, with 60 diferent users, without concurrent, I get between 0. If I repeat the test about 2000 times, with 2 users concurrent, I get between 3 or 10 errors. If I repeat the test about 2000 times, with 4 users concurrent, I get between 10-20 errors. After see this error, I set a tcpdump to try to watch the SOLR XML and GET, I can watch that Solr send a xml like this: <response></response> with 200 as http status When the normal response is like this <response> <lst name="responseHeader"> <int name="status">0</int> <int name="QTime">1</int> <lst name="params"> <str name="fl">uid,score</str> <str name="sort">uid asc</str> <str name="q">BLABLABLA</str> <str name="fq">+user:"ANYUSER" +uidv:1208469916 +box:"ANYFOLDER" -ns:[* TO *]</str> <str name="rows">1</str> </lst> </lst> <result name="response" numFound="0" start="0" maxScore="0.0"/> </response> At first, I think that the problems it's in Solr, but after get all GET from tcpdump, I make a python script with urllib2 and send it all to Solr with the same concurrency and I can't get any error or "empty response" Have someone made a intensive concurrency tests over Dovecot + Solr ? -- Antonio Pérez-Aranda Alcaide aperezaranda(a)yaco.es Yaco Sistemas S.L. http://www.yaco.es/ C/ Rioja 5, 41001 Sevilla Teléfono +34 954 50 00 57 Fax +34 954 50 09 29

2 1

[Dovecot] 2.1 Plans
by Steve Fatula 18 Oct '11

18 Oct '11

Back in early 2010, Timo posted about a potential 2.1 feature to in essence reduce the number of imap/pop3 processes using various techniques since the code already supports multiple connections. It even went as far as moving all idle connections. I don't see this on the 2.1 roadmap. Is it still planned perhaps for 2.1? Thousands of imap processes going away is a great thing for me! So, just curious. Reference: http://dovecot.org/list/dovecot/2010-January/046148.html Steve

2 1

[Dovecot] Convert-tool maildir > mbox
by Bertrand Jacquin 18 Oct '11

18 Oct '11

Timo, Is seems that this commit broke convertion from Maildir to Mbox using dovecot 1.2 convert-tool binary : 2009-07-09 Timo Sirainen <tss(a)iki.fi> * src/plugins/convert/convert-storage.c: convert plugin: Fixed changing hierarchy separators in mailbox names when alt_hierarchy_char isn't set. [a9f719f9a509] <HEAD> Since, I get the following : $ convert-tool user1 /var/mail/example.com/user1 Maildir:/var/mail/example.com/user1 mbox:/var/mail/example.com/user1-mbox alt_hierarchy_char=_ Error: Mailbox conversion: Couldn't create mailbox Sent/test: Mailbox doesn't allow inferior mailboxes Error: Internal failure Strace give show me a failure after : access("/var/mail/example.com/user1/.Sent.test/cur", W_OK) = 0 stat("/var/mail/example.com/user1-mbox/Sent/test", 0x7fff843e73b0) = -1 ENOTDIR (Not a directory) write(2, "Error: Mailbox conversion: Couldn"..., 103Error: Mailbox conversion: Couldn't create mailbox Sent/test: Mailbox doesn't allow inferior mailboxes ) = 103 lstat("/var/mail/example.com/user1/.dovecot.convert.lock", {st_mode=S_IFREG|0644, st_size=12, ...}) = 0 unlink("/var/mail/example.com/user1/.dovecot.convert.lock") = 0 Is that somethinh known ? Didn't find anything interesting in archives. Maybe that kind of conversion have evolved since 2.0 ? Thanks, Beber

2 1

[Dovecot] doveadm mailbox list shows file system directories as mailboxes
by Jürgen Obermann 18 Oct '11

18 Oct '11

Hello. In our dovecvot we use mbox format with the default filesystem layout. Therefore it is not possible to have mailboxes which are subfolders of other mailboxes containing messages. The command "doveadm mailbox list" includes the file system directories, that contain only subfolders, as normal mailboxes in the output: archiv archiv/daemon archiv/dovecot Did I miss something in the dovecot configuration or is there a bug in the command "doveadm mailbox list"? # 2.0.13: /opt/local/etc/dovecot/dovecot.conf # OS: SunOS 5.10 sun4v auth_verbose = yes disable_plaintext_auth = no listen = imap.hrz.uni-giessen.de localhost mail_fsync = always mail_location = mbox:~/Mail:INBOX=/var/mail/%u mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = mail_log notify managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mmap_disable = yes namespace { inbox = yes location = prefix = separator = / type = private } namespace { hidden = yes list = no location = prefix = Mail/ separator = / subscriptions = yes type = private } Thanks, Jürgen -- Hochschulrechenzentrum der | Mail: Juergen.Obermann(a)hrz.uni-giessen.de Justus-Liebig-Universitaet | WWW: http://www.uni-giessen.de/obermann/ Heinrich-Buff-Ring 44 | Tel: 0641-99-13054 (0641-99-13001) D-35392 Giessen, Germany | Fax: 0641-99-13009

3 2

Re: [Dovecot] Spammers attempting SASL Auth
by Tom Pawlowski 17 Oct '11

17 Oct '11

Take a look at: http://hg.dovecot.org/dovecot-2.0/file/962df5d9413a/src/auth/auth-request.c on line 536. That's the auth service catching illegal characters and rejecting the attempt. It'll happen with or without a valid user. So, working as it should. As for spammers trying to brute force valid logins, yep, pretty common. Higher rate of success if they can mail from a known good server and account. * Simon Brereton <simon.brereton(a)buongiorno.com> [2011-10-17 11:51:15 -0400]: > On 17 October 2011 11:31, Robert Schetterer <robert(a)schetterer.org> wrote: > > Am 17.10.2011 17:16, schrieb Simon Brereton: > >> Hi > >> > >> This is a new one on me - I've never seen spammers attempt to use to SASL Auth to inject spam. None of the users they are trying (newsletter, dummy, test, etc.) exist, but what worries me is the illegal chars error - is this a known vulnerability in dovecot they are trying to exploit? I'm running 1:1.2.15-7 installed from apt-get.. > >> > >> Oct 17 15:07:16 mail postfix/smtpd[14422]: connect from unknown[208.86.147.92] > >> Oct 17 15:07:16 mail dovecot: auth(default): passdb(newsletter(a)mydomain.net,208.86.147.92): Attempted login with password having illegal chars > >> Oct 17 15:07:17 mail dovecot: pop3-login: Disconnected (auth failed, 1 attempts): user=<test(a)mydomain.net>, method=PLAIN, rip=208.86.147.92, lip=83.170.64.84 > >> Oct 17 15:07:18 mail postfix/smtpd[14403]: warning: 208.86.147.92: hostname default-208-86-147-92.nsihosting.net verification failed: Name or service not known > >> > >> > >> Simon > >> > > > > this maybe a brute force attack,or more easy someone missconfigured his > > client , you may use fail2ban etc to block it > > not directly related to dovecot > > 17 queries in 30 seconds is not a misconfigured client :) > > And I'm already using Fail2Ban - but as someone on this list pointed > out recently, that doesn't apply if they try X attempts on the same > connection. Although, I don't think that was case here - maybe I > should update my dovecot jail with that illegal chars line. But, be > that as it may - all these attempts failed because the user didn't > exist. What if the user exists though? Does this illegal chars make > a hole for them to enter through? > > Simon > -- Tom Pawlowski OIT-CSS System Administrator office: Hill 147 email: tompru(a)jla.rutgers.edu phone: (732) 445-2634

2 1

Re: [Dovecot] Spammers attempting SASL Auth
by Robert Schetterer 17 Oct '11

17 Oct '11

Am 17.10.2011 17:51, schrieb Simon Brereton: > On 17 October 2011 11:31, Robert Schetterer <robert(a)schetterer.org> wrote: >> Am 17.10.2011 17:16, schrieb Simon Brereton: >>> Hi >>> >>> This is a new one on me - I've never seen spammers attempt to use to SASL Auth to inject spam. None of the users they are trying (newsletter, dummy, test, etc.) exist, but what worries me is the illegal chars error - is this a known vulnerability in dovecot they are trying to exploit? I'm running 1:1.2.15-7 installed from apt-get.. >>> >>> Oct 17 15:07:16 mail postfix/smtpd[14422]: connect from unknown[208.86.147.92] >>> Oct 17 15:07:16 mail dovecot: auth(default): passdb(newsletter(a)mydomain.net,208.86.147.92): Attempted login with password having illegal chars >>> Oct 17 15:07:17 mail dovecot: pop3-login: Disconnected (auth failed, 1 attempts): user=<test(a)mydomain.net>, method=PLAIN, rip=208.86.147.92, lip=83.170.64.84 >>> Oct 17 15:07:18 mail postfix/smtpd[14403]: warning: 208.86.147.92: hostname default-208-86-147-92.nsihosting.net verification failed: Name or service not known >>> >>> >>> Simon >>> >> >> this maybe a brute force attack,or more easy someone missconfigured his >> client , you may use fail2ban etc to block it >> not directly related to dovecot > > 17 queries in 30 seconds is not a misconfigured client :) > > And I'm already using Fail2Ban - but as someone on this list pointed > out recently, that doesn't apply if they try X attempts on the same > connection. Although, I don't think that was case here - maybe I > should update my dovecot jail with that illegal chars line. But, be > that as it may - all these attempts failed because the user didn't > exist. What if the user exists though? Does this illegal chars make > a hole for them to enter through? > > Simon > as i posted you offlist, this is a smtp attack, look at your i.e fail2ban postfix rules, fail2ban dovecot ruel is for banning pop3/imap brute force -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

1 0

Re: [Dovecot] Spammers attempting SASL Auth
by Robert Schetterer 17 Oct '11

17 Oct '11

Am 17.10.2011 17:16, schrieb Simon Brereton: > Hi > > This is a new one on me - I've never seen spammers attempt to use to SASL Auth to inject spam. None of the users they are trying (newsletter, dummy, test, etc.) exist, but what worries me is the illegal chars error - is this a known vulnerability in dovecot they are trying to exploit? I'm running 1:1.2.15-7 installed from apt-get.. > > Oct 17 15:07:16 mail postfix/smtpd[14422]: connect from unknown[208.86.147.92] > Oct 17 15:07:16 mail dovecot: auth(default): passdb(newsletter(a)mydomain.net,208.86.147.92): Attempted login with password having illegal chars > Oct 17 15:07:17 mail dovecot: pop3-login: Disconnected (auth failed, 1 attempts): user=<test(a)mydomain.net>, method=PLAIN, rip=208.86.147.92, lip=83.170.64.84 > Oct 17 15:07:18 mail postfix/smtpd[14403]: warning: 208.86.147.92: hostname default-208-86-147-92.nsihosting.net verification failed: Name or service not known > > > Simon > this maybe a brute force attack,or more easy someone missconfigured his client , you may use fail2ban etc to block it not directly related to dovecot -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 1

[Dovecot] Spammers attempting SASL Auth
by Simon Brereton 17 Oct '11

17 Oct '11

Hi This is a new one on me - I've never seen spammers attempt to use to SASL Auth to inject spam. None of the users they are trying (newsletter, dummy, test, etc.) exist, but what worries me is the illegal chars error - is this a known vulnerability in dovecot they are trying to exploit? I'm running 1:1.2.15-7 installed from apt-get.. Oct 17 15:07:16 mail postfix/smtpd[14422]: connect from unknown[208.86.147.92] Oct 17 15:07:16 mail dovecot: auth(default): passdb(newsletter(a)mydomain.net,208.86.147.92): Attempted login with password having illegal chars Oct 17 15:07:17 mail dovecot: pop3-login: Disconnected (auth failed, 1 attempts): user=<test(a)mydomain.net>, method=PLAIN, rip=208.86.147.92, lip=83.170.64.84 Oct 17 15:07:18 mail postfix/smtpd[14403]: warning: 208.86.147.92: hostname default-208-86-147-92.nsihosting.net verification failed: Name or service not known Simon

1 0

[Dovecot] dovecot-antispam – Debian package
by Philipp Haselwarter 17 Oct '11

17 Oct '11

Dovecot2 has been around for a bit now but Eugene Paskevich's antispam plugin unfortunately still doesn't seem to have a tagged release. Has anyone by any chance rolled a .deb for the plugin that works on current Debian sid? -- Philipp Haselwarter

1 0

[Dovecot] lmtp performance
by Juan Carlos Sanchez 17 Oct '11

17 Oct '11

Hello: In the process of migration from version 1.2 to 2.0 have tried to use lmtp instead of lda as delivery agent. But unfortunately througput we get is poor with lmtp compared to lda. In peak times with lda we are able to deliver over 1800 messages/minute (high I/O but not affecting service) but if we switch to lmtp cannot deliver more than 300 mess/minute (very low I/O). This is enough for normal work but low under heavy load (distribution lists messages sometimes stay queued for 4 hours before deliver). We have arround 50000 boxes and use postfix as MTA How to increase lmtp performance? dovecot config for lda and lmtp: protocol lda { auth_socket_path = /usr/local/var/run/dovecot/auth-master info_log_path = /var/log/mail/dovecot_deliver.log log_path = /var/log/mail/dovecot_deliver.log mail_plugins = quota sieve zlib postmaster_address = postmaster(a)upm.es sendmail_path = /usr/lib/sendmail } protocol lmtp { info_log_path = /var/log/mail/dovecot_deliver.log log_path = /var/log/mail/dovecot_deliver.log mail_plugins = quota sieve zlib postmaster_address = postmaster(a)upm.es sendmail_path = /usr/lib/sendmail } In postfix I have: mailbox_transport = lmtp:unix:private/dovecot-lmtp Thanks in advance. -- ------------------------------------------------------ Juan Carlos Sanchez Hernandez Universidad Politecnica de Madrid ------------------------------------------------------

1 0

[Dovecot] Problems Configuring Pigeonhole/Seve
by Ian Barton 17 Oct '11

17 Oct '11

I am moving my email server from Ubuntu Lucid to Arch. The Arch server is running Dovecot V2.0.15. Email is working fine, but I can't get Pigeonhiole/sieve to work. My dovecot.conf is: protocols = imap sieve ssl = yes ssl_cert = </etc/ssl/certs/mail2.wilkesley.net.crt ssl_key = </etc/ssl/private/mail2.wilkesley.net.key first_valid_uid = 5000 first_valid_gid = 5000 auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ namespace { location = maildir:/home/vmail/%d/%n/Maildir type = private prefix = INBOX. inbox = yes hidden = yes } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep } protocol lda { postmaster_address = ian(a)wilkesley.net hostname = wilkesley.org sendmail_path = /usr/sbin/sendmail mail_plugins = $mail_plugins sieve } protocol sieve { # Nothing to do here as defaults are OK } plugin { sieve = ~/.dovecot.sieve sieve_global_path = /home/vmail/globalsieverc sieve_dir = ~/ } passdb { driver = sql args = /etc/dovecot/dovecot-sql.conf } userdb { driver = sql args = /etc/dovecot/dovecot-sql.conf } I have created the sieve dir in the virtual users folder. However sieve doesn't appear to be working. I have tried logging in manually to see if sieve is running, but get the following error: ian:~/ $ gnutls-cli --starttls -p 143 mail2.wilkesley.net [8:32:22] Resolving 'mail2.wilkesley.net'... Connecting to '127.0.0.1:143'... - Simple Client Mode: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN] Dovecot ready. STARTTLS STARTTLS BAD Error in IMAP command received by server. According to the Dovecot wiki this should reply with the capabilities of my server, Note the server sends and receives mail OK using starttls. So what am I doing wrong?

2 1

[Dovecot] Question about ionice & dovecot-deliver
by Maria Arrea 16 Oct '11

16 Oct '11

Hello We are running dovecot 2.0.13 with mdbox on RHEL 5.7 x64, ext4 filesystem. Sometimes we have a big load increase because a mailing list server send 16.000 32k messages in less than 3 minutes. We want to "slow down" delivery, we prefer slow delivery instead of logging out webmail users. I have the following line en /etc/postfix/master.cf: flags=DRhu user=userid argv=/usr/libexec/dovecot/deliver -d ${user} And in /etc/postfix/main.cf mailbox_command = /usr/libexec/dovecot/deliver I would like to add ionice to the equation, prefixing /usr/bin/ionice -c2 -n6 before the deliver lines in postfix config. Is there any other way of slowing down delivery speed vs imap access? Regards Maria

3 2

[Dovecot] Issue after upgrading to Ubuntu Server 11.10
by Chris Vanden Berghe 14 Oct '11

14 Oct '11

Hi all, After upgrading to Ubuntu Server 11.10 my mail setup stopped working. The error message I get is: lda: Error: userdb lookup: connect(/var/run/dovecot/auth-userdb) failed: Permission denied (euid=5000(vmail) egid=5000(vmail) missing +r perm: /var/run/dovecot/auth-userdb, euid is not dir owner) Does anybody have an idea how to solve this? Thanks, Chris. --- # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 3.0.0-12-generic x86_64 Ubuntu 11.10 ext3 auth_verbose = yes log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:/var/vmail/%u mail_privileged_group = mail maildir_stat_dirs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { fts = squat fts_squat = partial=4 full=10 } protocols = imap service auth { unix_listener /var/spool/postfix/private/auth-client { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = vmail mode = 0600 user = vmail } } service imap-login { inet_listener imap { address = localhost port = 143 } inet_listener imaps { address = * port = 993 } } ssl_cert = </etc/ssl/private/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = uid=5000 gid=5000 home=/var/vmail/%u driver = static } protocol imap { mail_max_userip_connections = 50 mail_plugins = fts fts_squat } protocol lda { mail_plugins = sieve }

1 1

Re: [Dovecot] Dovecot not processing through Sieve
by Stephan Bosch 13 Oct '11

13 Oct '11

Please reply to the list as well. On 10/13/2011 3:28 PM, Steven Kiehl wrote: > > On Thu, Oct 13, 2011 at 9:21 AM, Stephan Bosch <stephan(a)rename-it.nl > <mailto:stephan@rename-it.nl>> wrote: > > Are you sure you are using the Dovecot LDA (deliver)? Did you > follow these instructions in the wiki? > > http://wiki1.dovecot.org/LDA > http://wiki1.dovecot.org/LDA/Postfix > > From the looks of things, your Postfix currently still does its > own mail delivery instead of using the Dovecot LDA. You should see > entries in your log relating to LDA/deliver and Sieve, especially > since you enabled mail_debug. To test whether Sieve is configured > correctly (and to see what the Dovecot LDA normally logs), you can > also manually execute /usr/lib/dovecot/deliver and feed it a message. > > I am using Dovecot deliver to perform mail delivery. I'm absolutely > certain of this because I get spam scores and it is SpamAssassin that > actually hands the mail over to deliver. Here is my postfix master.cf > <http://master.cf> entry for spamc/deliver: > > dovespam unix n n n - - pipe > flags=DRhu user=dovemail:dovemail argv=/usr/bin/spamc -f -e > /usr/lib/dovecot/deliver -c /etc/dovecot/dovecot.conf -f ${sender} -d > ${user}@${nexthop} -n -m ${extension} Ok, then what do your logs say about delivery? Even when things are filed in INBOX, the logs should show that deliver and sieve are being executed and putting the mail there. http://wiki1.dovecot.org/Logging Regards, Stephan

2 1

[Dovecot] Sieve and UserDB/SQL support
by ben＠benweblife.fr 13 Oct '11

13 Oct '11

Hi, I would like to know if plugins of sieve support UserDB/SQL backend. For example, for the vacation plugin, is it possible to retrieve a field like "sieve_vacation_days", "sieve_vacation_reason", and so on.. on user_query? Or, there is a plan for implement this? Thanks ------ dovecot version: 2.0.13

2 1

[Dovecot] Dovecot not processing through Sieve
by Steven Kiehl 13 Oct '11

13 Oct '11

Hello everyone, I'm fairly new to Dovecot, but I've gotten the majority of things working except for Sieve. I'm running Dovecot 1.2.9 coupled with Postfix and SpamAssassin all with a virtual domains setup. I am receiving mail and it is being processed by all the plugins that operate through Postfix. The quota configured in Dovecot appears to be working because my mail client shows the configured quota. But the Sieve rules are not processing. I created a rule as follows to filter spam: require ["fileinto"]; # rule:[global-spam] if anyof (header :contains "Subject" "[SPAM]", header :contains "X-Spam-Flag" "YES") { fileinto "Junk"; } If I mail myself a message with [SPAM] in the title, it goes into my inbox regardless. I've run 'sieve-test' with the same email and it says it will file it into Junk. The Junk folder exists. I even tried adding :create and the "mailbox" plugin, but that didn't do anything either. Here is the relevant majority of my dovecot configuration: login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_privileged_group: mail mail_location: maildir:/home/dovecot/mail/domains/%d/%n/Maildir mail_debug: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve imap_client_workarounds(default): outlook-idle delay-newmail tb-extra-mailbox-sep imap_client_workarounds(imap): outlook-idle delay-newmail tb-extra-mailbox-sep imap_client_workarounds(pop3): imap_client_workarounds(managesieve): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): namespace: type: private separator: / inbox: yes list: yes subscriptions: yes lda: *mail_plugins: quota sieve* quota_full_tempfail: yes deliver_log_format: msgid=%m: %$ rejection_reason: Your message to <%t> was automatically rejected:%n%r auth default: mechanisms: cram-md5 plain login passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 user: dovemail group: dovemail socket: type: listen client: path: /var/spool/postfix/private/dovecot-auth mode: 432 user: postfix group: postfix plugin: convert_mail: maildir:/home/dovecot/mail/domains/%d/%u/Maildir * sieve: /etc/dovecot/sieve/domains/%d/%n.sieve* * sieve_global_dir: /etc/dovecot/sieve/global/* quota: maildir:User quota_rule: INBOX:storage=500M quota_rule2: INBOX.Trash:storage=100M The sieve plugin exists in /usr/lib/dovecot/modules/lda/lib90_sieve_plugin.so, so I would assume I'd have to use *mail_plugin: sieve* as my configuration setting. Like I said, I am receiving emails to my domains without any problem, but sieve rules are not being processed. I can see the rules set up by using the Roundcube plugin, and I can create and edit rules through Roundcube, but nothing different happens when I send myself an email. It all just delivers to the inbox. Thanks for your help, Steve K.

2 1

[Dovecot] Auth Worker failures
by Simon Brereton 12 Oct '11

12 Oct '11

Hi I have a script that checks the logs each day and mails me invalid user attempts and authentication failures for the previous day. (I use fail2ban to ban multiple attempts in a short space of time). For some reason, this appears every day: Oct 11 06:25:12 mail dovecot: auth-worker(default): sql(simon(a)mydomain.net,127.0.0.1): Password mismatch Oct 11 06:25:19 mail dovecot: auth-worker(default): sql(simon(a)mydomain.net,127.0.0.1): Password mismatch Oct 11 06:25:31 mail dovecot: auth-worker(default): sql(simon(a)mydomain.net,127.0.0.1): Password mismatch Oct 11 06:25:48 mail dovecot: auth-worker(default): sql(simon(a)mydomain.net,127.0.0.1): Password mismatch Oct 11 06:26:10 mail dovecot: imap-login: Aborted login (auth failed, 4 attempts): user=<simon(a)mydomain.net>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Of all the accounts on the box, it's only mine that throws this up. Since its LIP is localhost, it could really only be for webmail - but I don't always leave the webmail open, so I'm curious to know how this gets there and what it is. Any suggestions? I find it difficult to believe I have an IMAP process in a script somewhere (especially with my user account - the postmaster account, I could believe, but not with my personal one).. The log time is UTC, so watching the process list at 2.24 is less than appealing! Simon

1 0

[Dovecot] dovecot2 auth-worker socket perms ignoring assigned ownership settings in conf.d/10-master.conf?
by mephistopheles＠operamail.com 12 Oct '11

12 Oct '11

I have Dovecot2 auth setup to run as user = doveauth group = dovecot configured in, vi conf.d/10-master.conf ... service auth { unix_listener /var/spool/postfix/private/auth { user = postfix group = postfix mode = 0660 } user = doveauth group = dovecot } service auth-worker { user = doveauth group = dovecot } ... When I start Dovecot, ls -al /var/run/dovecot/auth-* /bin/ls: No match. service dovecot-custom start Starting Dovecot ... done Dovect's auth-process sockets are created with different ownership than what I specified, ls -al /var/run/dovecot/auth-* srw------- 1 root root 0 Oct 11 19:30 /var/run/dovecot/auth-client srw------- 1 dovecot root 0 Oct 11 19:30 /var/run/dovecot/auth-login srw------- 1 root root 0 Oct 11 19:30 /var/run/dovecot/auth-master srw------- 1 root root 0 Oct 11 19:30 /var/run/dovecot/auth-userdb srw------- 1 dovecot root 0 Oct 11 19:30 /var/run/dovecot/auth-worker Which causes problems when I test AUTH, telnet 127.0.0.1 143 Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. a login "xxx(a)domain.loc" "testpass" a NO [UNAVAILABLE] Temporary authentication failure. * OK Waiting for authentication process to respond.. In logs, ==> /var/log/dovecot/dovecot-debug.log <== Oct 11 19:32:11 auth: Debug: Loading modules from directory: /usr/lib64/dovecot/modules/auth Oct 11 19:32:11 auth: Debug: Module loaded: /usr/lib64/dovecot/modules/auth/libauthdb_ldap.so Oct 11 19:32:11 auth: Debug: Module loaded: /usr/lib64/dovecot/modules/auth/libdriver_mysql.so Oct 11 19:32:11 auth: Debug: Module loaded: /usr/lib64/dovecot/modules/auth/libdriver_pgsql.so Oct 11 19:32:11 auth: Debug: Module loaded: /usr/lib64/dovecot/modules/auth/libdriver_sqlite.so Oct 11 19:32:11 auth: Debug: Module loaded: /usr/lib64/dovecot/modules/auth/libmech_gssapi.so Oct 11 19:32:11 auth: Debug: auth client connected (pid=2397) Oct 11 19:32:17 auth: Debug: client in: AUTH 1 PLAIN service=imap secured lip=127.0.0.1 rip=127.0.0.1lport=143 rport=47016 resp=<hidden> ==> /var/log/dovecot/dovecot.log <== Oct 11 19:32:17 auth: Fatal: net_connect_unix(auth-worker) in directory /var/run/dovecot failed: Permission denied (euid=1101(doveauth) egid=305(dovecot) missing +r perm: /var/run/dovecot/auth-worker, dir owned by 305:305 mode=0755) What needs to change to get those sockets created with correct/assigned ownership & perms?

2 5

[Dovecot] To query two SQL tables for user verification over LMTP, should I use (a) two separate lookups? or (b) just one lookup with a boolean query?
by jake0534＠airpost.net 12 Oct '11

12 Oct '11

Hey all I've been running a Dovecot 1X server for awhile. Most of the config was pretty simple using flat files. I'm switching to Dovecot 2X now, and want to switch to using SQL for lookups so I can share info with the Postfix front end. For starters I setup two SIMPLE SQL tables -- a 'users' table and a 'aliases' table, where each user can have many aliases. I want to have Postfix check Dovecot's SASL/LMTP passdb to see if a <user>@<domain> exists. If yes, deliver through LMTP. If NO, reject it. Here are the table definitions so far, CREATE TABLE user ( userid TINYINT, user VARCHAR(64), domain VARCHAR(128), password VARCHAR(64), PRIMARY KEY (userid), UNIQUE (user,domain) ); CREATE TABLE alias ( aliasid TINYINT, alias VARCHAR(64), user VARCHAR(64), domain VARCHAR(128), PRIMARY KEY (aliasid), UNIQUE (domain,user,alias), CONSTRAINT fk_alias1 FOREIGN KEY (user) REFERENCES user (user) ON DELETE NO ACTION ON UPDATE NO ACTION, CONSTRAINT fk_alias2 FOREIGN KEY (domain) REFERENCES user (domain) ON DELETE NO ACTION ON UPDATE NO ACTION ); With flat file and just one table, 'users', I get how to setup LMTP. I can get Postfix delivering/rejecting over LMTP depending on if the user exists in the Dovecot passdb or not. I don't get how to do the SQL query in Dovecot if I have the TWO tables. An inbound <user>@<domain> needs to be auth'd as valid if it exists in EITHER 'user' OR 'alias' table. Do I need to use a single lookup for passdb with some sort of "IF EXISTS IN TABLE 'user' OR TABLE 'alias'" query? Or do I need to have TWO lookups, the main one for 'user' and a fallback one for 'alias' (like talked about here http://wiki2.dovecot.org/Authentication/MultipleDatabases)? Cheers! Jake

2 5

[Dovecot] using ecc-certificates (ellyptic curve) will not establish connection
by Fresel Michal - hi competence e.U. 11 Oct '11

11 Oct '11

hi I want to use ECC(ellyptic curve cryptography) for SSL-connections but somehow dovecot doesn't like my ECC-certificates :( I tried to test using following scenario: machine: debian 6 (x64) dovecot 2.0.15-0~auto+21 ((f6a2c0e8bc03) from http://xi.rename-it.nl/debian openssl 1.0.0e-2 from testing (as the default 0.9.8o-4squeeze3 needs also the parameter -cipher ECCdraft for testing) creating keys+cert for ecc (i.e. curves prime192v1, secp521r1) # openssl ecparam -name prime192v1 -genkey -out prime192v1.key # openssl req -new -key prime192v1.key -out prime192v1.csr # openssl req -x509 -in prime192v1.csr -key prime192v1.key -out prime192v1.crt testing these in 2 windows # openssl s_server -cert prime192v1.crt -key prime192v1.key -www # openssl s_client note: when using the default openssl version 0.9.8o-4squeeze3 you need to append -cipher ECCdraft output (cut) ... New, TLSv1/SSLv3, Cipher is ECDHE-ECDSA-AES256-SHA Server public key is 192 bit Secure Renegotiation IS supported Compression: zlib compression Expansion: zlib compression SSL-Session: Protocol : SSLv3 Cipher : ECDHE-ECDSA-AES256-SHA Session-ID: xxxxx Session-ID-ctx: Master-Key: xxxxx Key-Arg : None PSK identity: None PSK identity hint: None Compression: 1 (zlib compression) Start Time: xxxxx Timeout : 7200 (sec) Verify return code: 18 (self signed certificate) looks promising - also for the secp521r1 curve but when changing dovecot.conf to use these keys and certificates it won't use them and return errors # openssl s_client -port 993 CONNECTED(00000003) 140543456835240:error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure:s3_pkt.c:1195:SSL alert number 40 140543456835240:error:1409E0E5:SSL routines:SSL3_WRITE_BYTES:ssl handshake failure:s3_pkt.c:591: --- no peer certificate available --- No client certificate CA names sent --- SSL handshake has read 7 bytes and written 0 bytes --- New, (NONE), Cipher is (NONE) Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE SSL-Session: Protocol : SSLv3 Cipher : 0000 Session-ID: Session-ID-ctx: Master-Key: Key-Arg : None PSK identity: None PSK identity hint: None Start Time: xxxxx Timeout : 7200 (sec) Verify return code: 0 (ok) --- and the log gives (using verbose_ssl = yes in dovecot.conf) ==> /var/log/mail.log <== dovecot: imap-login: Warning: SSL: where=0x10, ret=1: before/accept initialization [127.0.0.1] ==> /var/log/mail.info <== dovecot: imap-login: Warning: SSL: where=0x10, ret=1: before/accept initialization [127.0.0.1] ==> /var/log/mail.warn <== dovecot: imap-login: Warning: SSL: where=0x10, ret=1: before/accept initialization [127.0.0.1] ==> /var/log/mail.log <== dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: before/accept initialization [127.0.0.1] ==> /var/log/mail.info <== dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: before/accept initialization [127.0.0.1] ==> /var/log/mail.warn <== dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: before/accept initialization [127.0.0.1] ==> /var/log/mail.log <== dovecot: imap-login: Warning: SSL alert: where=0x4008, ret=552: fatal handshake failure [127.0.0.1] ==> /var/log/mail.info <== dovecot: imap-login: Warning: SSL alert: where=0x4008, ret=552: fatal handshake failure [127.0.0.1] ==> /var/log/mail.warn <== dovecot: imap-login: Warning: SSL alert: where=0x4008, ret=552: fatal handshake failure [127.0.0.1] ==> /var/log/mail.log <== dovecot: imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv3 read client hello C [127.0.0.1] ==> /var/log/mail.info <== dovecot: imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv3 read client hello C [127.0.0.1] ==> /var/log/mail.warn <== dovecot: imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv3 read client hello C [127.0.0.1] ==> /var/log/mail.log <== dovecot: imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv3 read client hello C [127.0.0.1] dovecot: imap-login: Disconnected (no auth attempts): rip=127.0.0.1, lip=127.0.0.1, TLS handshaking: SSL_accept() failed: error:1408A0C1:SSL routines:SSL3_GET_CLIENT_HELLO:no shared cipher ==> /var/log/mail.info <== dovecot: imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv3 read client hello C [127.0.0.1] dovecot: imap-login: Disconnected (no auth attempts): rip=127.0.0.1, lip=127.0.0.1, TLS handshaking: SSL_accept() failed: error:1408A0C1:SSL routines:SSL3_GET_CLIENT_HELLO:no shared cipher ==> /var/log/mail.warn <== dovecot: imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv3 read client hello C [127.0.0.1] from doveconf -a: ssl = required ssl_ca = ssl_cert = </etc/ssl/certs/prime192v1.crt ssl_cert_username_field = commonName ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL ssl_key = </etc/ssl/certs/prime192v1.key ssl_key_password = ssl_parameters_regenerate = 168 ssl_verify_client_cert = no Has anybody already tested this and made it working? Or do i have just to recompile everything to make it work? Greetings Mike

1 1

[Dovecot] inbox issue
by Eric Broch 10 Oct '11

10 Oct '11

I have dovecot 2.0.11 installed on a CentOS 5.7 email server. Two of the server email clients, one using Outlook and the other Thunderbird, have had all the contents of their inbox disappear only to reappear at a later time. One client's inbox email reappeared upon receiving a test email (to check if it would show up in the inbox) from another user. Has anyone heard of such a thing? Here's a dump of my dovecot configuration. # 2.0.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-238.19.1.el5 i686 CentOS release 5.7 (Final) auth_anonymous_username = anonymous auth_cache_negative_ttl = 1 hours auth_cache_size = 32 M auth_cache_ttl = 1 hours auth_debug = no auth_debug_passwords = no auth_default_realm = auth_failure_delay = 2 secs auth_first_valid_uid = 500 auth_gssapi_hostname = auth_krb5_keytab = auth_last_valid_uid = 0 auth_master_user_separator = auth_mechanisms = plain login digest-md5 cram-md5 auth_realms = auth_socket_path = auth-userdb auth_ssl_require_client_cert = no auth_ssl_username_from_cert = no auth_use_winbind = no auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ auth_username_format = %Lu auth_username_translation = auth_verbose = no auth_verbose_passwords = no auth_winbind_helper_path = /usr/bin/ntlm_auth auth_worker_max_count = 30 base_dir = /var/run/dovecot config_cache_size = 1 M debug_log_path = default_client_limit = 1000 default_idle_kill = 60 default_internal_user = dovecot default_login_user = dovenull default_process_limit = 100 default_vsz_limit = 256 M deliver_log_format = msgid=%m: %$ dict_db_config = director_doveadm_port = 0 director_mail_servers = director_servers = director_user_expire = 15 mins disable_plaintext_auth = no dotlock_use_excl = yes doveadm_socket_path = doveadm-server doveadm_worker_count = 0 first_valid_gid = 1 first_valid_uid = 89 hostname = imap_capability = imap_client_workarounds = imap_id_log = imap_id_send = imap_idle_notify_interval = 2 mins imap_logout_format = bytes=%i/%o imap_max_line_length = 64 k import_environment = TZ info_log_path = last_valid_gid = 0 last_valid_uid = 0 lda_mailbox_autocreate = no lda_mailbox_autosubscribe = no lda_original_recipient_header = libexec_dir = /usr/libexec/dovecot listen = *, :: lmtp_proxy = no lmtp_save_to_detail_mailbox = no lock_method = fcntl log_path = /var/log/dovecot.log log_timestamp = "%b %d %H:%M:%S " login_access_sockets = login_greeting = Dovecot toaster ready. login_log_format = %$: %s login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c login_trusted_networks = mail_access_groups = mail_attachment_dir = mail_attachment_fs = sis posix mail_attachment_hash = %{sha1} mail_attachment_min_size = 128 k mail_cache_fields = flags mail_cache_min_mail_count = 0 mail_chroot = mail_debug = no mail_fsync = optimized mail_full_filesystem_access = no mail_gid = mail_home = mail_location = mail_log_prefix = "%s(%u): " mail_max_keyword_length = 50 mail_max_lock_timeout = 0 mail_max_userip_connections = 10 mail_never_cache_fields = imap.envelope mail_nfs_index = no mail_nfs_storage = no mail_plugin_dir = /usr/lib/dovecot mail_plugins = mail_privileged_group = mail_save_crlf = no mail_temp_dir = /tmp mail_uid = mailbox_idle_check_interval = 30 secs mailbox_list_index_disable = no maildir_copy_with_hardlinks = yes maildir_stat_dirs = no maildir_very_dirty_syncs = no master_user_separator = mbox_dirty_syncs = yes mbox_dotlock_change_timeout = 2 mins mbox_lazy_writes = yes mbox_lock_timeout = 5 mins mbox_min_index_size = 0 mbox_read_locks = fcntl mbox_very_dirty_syncs = no mbox_write_locks = dotlock fcntl mdbox_preallocate_space = no mdbox_rotate_interval = 0 mdbox_rotate_size = 2 M mmap_disable = no namespace { hidden = no inbox = yes list = yes location = prefix = INBOX. separator = . subscriptions = yes type = private } namespace { hidden = no inbox = no list = yes location = maildir:/home/vpopmail/domains/acemt.com/shared/projects prefix = projects. separator = . subscriptions = yes type = public } passdb { args = cache_key=%u webmail=127.0.0.1 deny = no driver = vpopmail master = no pass = no } plugin/quota = maildir pop3_client_workarounds = pop3_enable_last = no pop3_fast_size_lookups = no pop3_lock_session = no pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_no_flag_updates = no pop3_reuse_xuidl = no pop3_save_uidl = no pop3_uidl_format = %08Xu%08Xv postmaster_address = protocols = imap quota_full_tempfail = no recipient_delimiter = + rejection_reason = Your message to <%t> was automatically rejected:%n%r rejection_subject = Rejected: %s sendmail_path = /usr/sbin/sendmail service anvil { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = anvil extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 1 protocol = service_count = 0 type = anvil unix_listener anvil-auth-penalty { group = mode = 0600 user = } unix_listener anvil { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service auth-worker { chroot = client_limit = 1 drop_priv_before_exec = no executable = auth -w extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener auth-worker { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 18446744073709551615 B } service auth { chroot = client_limit = 4096 drop_priv_before_exec = no executable = auth extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener auth-client { group = mode = 0600 user = } unix_listener auth-login { group = mode = 0600 user = $default_internal_user } unix_listener auth-master { group = mode = 0600 user = } unix_listener auth-userdb { group = mode = 0600 user = } unix_listener login/login { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service config { chroot = client_limit = 0 drop_priv_before_exec = no executable = config extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = config unix_listener config { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service dict { chroot = client_limit = 1 drop_priv_before_exec = no executable = dict extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dict { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service director { chroot = client_limit = 0 drop_priv_before_exec = no executable = director extra_groups = fifo_listener login/proxy-notify { group = mode = 00 user = } group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener director-admin { group = mode = 0600 user = } unix_listener login/director { group = mode = 00 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service dns_client { chroot = client_limit = 1 drop_priv_before_exec = no executable = dns-client extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dns-client { group = mode = 0666 user = } unix_listener login/dns-client { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service doveadm { chroot = client_limit = 1 drop_priv_before_exec = no executable = doveadm-server extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener doveadm-server { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service imap-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = imap-login extra_groups = group = idle_kill = 0 inet_listener imap { address = port = 143 ssl = no } inet_listener imaps { address = port = 993 ssl = yes } privileged_group = process_limit = 0 process_min_avail = 0 protocol = imap service_count = 1 type = login user = $default_login_user vsz_limit = 64 M } service imap { chroot = client_limit = 1 drop_priv_before_exec = no executable = imap extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = imap service_count = 1 type = unix_listener login/imap { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service lmtp { chroot = client_limit = 0 drop_priv_before_exec = no executable = lmtp extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = lmtp service_count = 0 type = unix_listener lmtp { group = mode = 0666 user = } user = vsz_limit = 0 } service log { chroot = client_limit = 0 drop_priv_before_exec = no executable = log extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = log user = vsz_limit = 18446744073709551615 B } service pop3-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = pop3-login extra_groups = group = idle_kill = 0 inet_listener pop3 { address = port = 110 ssl = no } inet_listener pop3s { address = port = 995 ssl = yes } privileged_group = process_limit = 0 process_min_avail = 0 protocol = pop3 service_count = 1 type = login user = $default_login_user vsz_limit = 64 M } service pop3 { chroot = client_limit = 1 drop_priv_before_exec = no executable = pop3 extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = pop3 service_count = 1 type = unix_listener login/pop3 { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service ssl-params { chroot = client_limit = 0 drop_priv_before_exec = no executable = ssl-params extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = startup unix_listener login/ssl-params { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } shutdown_clients = yes ssl = yes ssl_ca = ssl_cert = </var/qmail/control/servercert.pem ssl_cert_username_field = commonName ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL ssl_key = </var/qmail/control/servercert.pem ssl_key_password = ssl_parameters_file = ssl-parameters.dat ssl_parameters_regenerate = 168 ssl_verify_client_cert = no submission_host = syslog_facility = mail userdb { args = cache_key=%u quota_template=quota_rule=*:backend=%q driver = vpopmail } valid_chroot_dirs = verbose_auth = no verbose_proctitle = no verbose_ssl = no version_ignore = no protocol imap { imap_client_workarounds = delay-newmail }

3 2

Re: [Dovecot] Filesystem quotas
by Joseph Tam 10 Oct '11

10 Oct '11

Timo Sirainen writes in response to Steve Fatula's query: > With imap_quota plugin it allows IMAP client to see how much quota is > used/left. You could also enable quota warnings. And configure the > quota exceeded error message. It could also prevent the catch-22 situation I wrote about earlier whereby a filesystem out-of-space condition will result in a user not being able get themselves out of that situation, since a mailbox operation (like a delete and expunge) will not be able to create a lockfile. Having quotas handled by the IMAP/LDA will allow extra room to handle this impasse. Disabling dotlock or using dotlock_try locking method are some other workarounds. Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] Timeout leak in get quota
by Danilo 10 Oct '11

10 Oct '11

Hello! I wrote perl script for read current quota usage, it works but when I run the program I receive a warning in Dovecot log: 2011-09-29 14:45:30 doveadm(guest(a)testmail.com): Warning: Timeout leak: 0x7f14800ad970 This is the script: =============================== #!/usr/bin/perl use strict; use Socket; use IO::Handle; socket(TSOCK, PF_UNIX, SOCK_STREAM,0); connect(TSOCK, sockaddr_un("/var/run/dovecot/doveadm-server")) or print("ERROR!"); print "VERSION\tdoveadm-server\t1\t0\n"; print "\tguest\(a)testmail.com\tquota get\n"; print "=" x 20 . "\n"; if (defined(my $messg = <TSOCK>)) { print $messg; print TSOCK "VERSION\tdoveadm-server\t1\t0\n"; TSOCK->flush; print TSOCK "\tguest\(a)testmail.com\tquota get\n"; TSOCK->flush; $messg = <TSOCK>; print $messg; $messg = <TSOCK>; print $messg; close TSOCK; } ============================= I hope someone could help me to fix the warning. Thanks in advance, Dany

3 3

Re: [Dovecot] Group ACL
by Daniel L. Miller 10 Oct '11

10 Oct '11

On 10/7/2011 11:08 PM, Daniel L. Miller wrote: > On 10/6/2011 8:38 AM, Daniel L. Miller wrote: >> Using Dovecot 2.0, LDAP userdb & passdb, with prefetch: >> >> [..] >> >> I have added permissions for "$allshared" to a mailbox's Inbox. It >> does not appear in the shared folders list. Other mailboxes, with >> explicit permission for a given username, work fine. What am I doing >> wrong? >> > Am I, as usual, doing something wrong? > Is there anything else I should supply to help diagnose the issue? -- Daniel

1 0

[Dovecot] Filesystem quotas
by Steve Fatula 10 Oct '11

10 Oct '11

I am wondering if I really need to use dovecot quota functions or not. Assume for the moment, that, each system user has a quota defined using Linux quotas, and that the Maildir is within their quota limited directory. So, any mail (or files created by the user etc) that would exceed the quota obviously can't be created. In such an environment, is there any advantage to implementing the same quota already defined in the filesystem via dovecot? Or, can I just make things simpler and ignore dovecot quotas? Assuming I keep the index and control files out of the quota limited directories. I presume if exceeding filesystem quota, the mail will not be delivered of course. If using lmtp, I presume it stays in the queue to retry later for some period of time. Steve

4 4

Re: [Dovecot] Group ACL
by Daniel L. Miller 08 Oct '11

08 Oct '11

On 10/6/2011 8:38 AM, Daniel L. Miller wrote: > Using Dovecot 2.0, LDAP userdb & passdb, with prefetch: > > [..] > > I have added permissions for "$allshared" to a mailbox's Inbox. It > does not appear in the shared folders list. Other mailboxes, with > explicit permission for a given username, work fine. What am I doing > wrong? > Am I, as usual, doing something wrong? -- Daniel

1 0

[Dovecot] lazy expunge namespaces
by Micah Anderson 07 Oct '11

07 Oct '11

I turned on lazy_expunge and configured a namespace following the wiki[0] instructions for mdbox configuration: namespace { inbox = yes location = prefix = separator = . } namespace { hidden = yes inbox = no list = no location = prefix = INBOX. separator = . } namespace { location = mdbox:~/mdbox:MAILBOXDIR=expunged prefix = EXPUNGED. separator = . } This created an EXPUNGED mailbox in my client (thunderbird), which was greyed out. When I deleted things, they got put in the EXPUNGED mailbox, as expected, but I could not access them to try and "restore" them. The server would say that the mailbox did not exist. micah 0. http://wiki2.dovecot.org/Plugins/Lazyexpunge --

1 0

[Dovecot] doveadm mailbox subscribe wildcard
by Micah Anderson 07 Oct '11

07 Oct '11

Hi, I noticed that wildcards work like the following, as described in the man page: # doveadm mailbox list -s -u bob dovecot* dovecot dovecot/pigeonhole dovecot/pigeonhole/2.0 however, wildcard subscriptions don't work: # doveadm mailbox subscribe -u bob dovecot* # doveadm mailbox list -s -u bob dovecot* dovecot dovecot* dovecot/pigeonhole dovecot/pigeonhole/2.0 It seems I subscribed the non-existant mailbox called 'dovecot*' -- is there a better way to handle this? thanks! micah --

3 3

[Dovecot] Using dsync to synchronize pop3 mailbox <-> pop3 mailbox
by Tristan Goguen 07 Oct '11

07 Oct '11

Hi All, We're trying to get dsync to synchronize pop3 mailboxes on multiple servers. Is this possible? Any hints are appreciated. Thanks, Tristan Tristan Goguen CEO, ILAP® T: 416-250-5600 ext. 205 F: 416-250-6755 tgoguen(a)ilap.com www.ilap.com

1 0

[Dovecot] I'm the ONLY user that can get mail
by Ed Hochman 06 Oct '11

06 Oct '11

Hi, I'm stumped. I can access the postfix server to read my mail. BUT I'm the only user that can. Everyone else get rejected. Here's the syslog entry for another user: ...dovecot: pop3-login: Disconnected (auth failed, 1 attempts): user=<jmarino>, method=PLAIN, rip=192.168.0.51, lip=192.168.0.189 And here's an entry for me: ...dovecot: pop3-login: Login: user=<ed>, method=PLAIN, rip=192.168.0.51, lip=192.168.0.189 So ONLY I am able to get my mail. And this is consistent. The other users and passwords are valid. I've re-set them just to be sure. I suspect it's a rights issue but I've checked the rights for all /var/mail files and they're all the same except the owner of the file is the actual owner. I also checked all the rights for the files in /etc/dovecot. They all look OK and they all have root/root for the owner and user. Since I installed the system and did all the editing of the configuration files it's possible, but unlikely, that I'm the owner or group of some key file. I've looked for that but found nothing suspicious. Is it possible I may have given myself root access? I don't see how. My UID is 1000. Does the fact I'm the first user (per my UID) make a difference? I would think not. So I'm stumped. I don't have a clue as to where to look or what to do next. Any thoughts will be greatly appreciated. This is Dovecot 1.2.15 on Ubuntu 11.04. A new/clean install. Plaintext passwords are allowed. Here's dovecot -n # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.38-11-generic i686 Ubuntu 11.04 protocols: pop3 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/pop3-login mail_privileged_group: mail mbox_write_locks: fcntl dotlock mail_executable: /usr/lib/dovecot/pop3 mail_plugin_dir: /usr/lib/dovecot/modules/pop3 auth default: passdb: driver: passwd passdb: driver: passwd-file args: /etc/passwd.dovecot userdb: driver: passwd Thanks

2 1

[Dovecot] Only using LMTP-delivery, where should domain & user aliases be configured, Dovecot or MTA conf?
by mephistopheles＠operamail.com 05 Oct '11

05 Oct '11

I have my MTA (Postfix) check Dovecot2 LMTP for existing users. No other delivery is done; this is a virtual/LMTP-only setup. I define known users in a Dovecot passwd-file, specified in conf.d/10-auth.conf passdb { args = ... username_format=%n /stor01/vmail/auth.d/%d/passwd e.g., vi /stor01/vmail/auth.d/mx1.domain1.com/passwd myuser:{scheme}####:... mail to: myuser(a)mx1.domain1.com is correctly auth'd and stored. I want two things to happen: (1) all mail to existing-users "@domain1.com" gets re-routed to "@mx1.domain1.com", i.e., map: myuser(a)domain1.com -> myuser(a)mx1.domain1.com and is accepted/not-rejected ONLY if 'myuser' is defined as a user in mx1.domain1.com/passwd and, (2) specific 'user' aliasing/remapping within a given domain, i.e. map: whatever(a)mx1.domain1.com -> myuser(a)mx1.domain1.com as long as 'myuser' is a defined user in mx1.domain1.com In these cases, where should I assign domain & mail aliases, Dovecot or the MTA's conf ?

1 0

[Dovecot] trouble setting up director, "invalid argument" for connect() call
by Jim Lawson 05 Oct '11

05 Oct '11

Hi Timo & everyone, I'm trying out a 2-node director setup, but I keep getting the following error: Oct 3 16:11:29 imapdir1 dovecot: master: Dovecot v2.0.15 starting up (core dumps disabled) Oct 3 16:11:34 imapdir1 dovecot: director: Error: connect(132.198.100.150:9090) failed: Invalid argument Oct 3 16:11:41 imapdir1 last message repeated 3 times Both nodes report this error. The director on each node is listening on port 9090 just fine: > [root@imapdir1 ~]# nc imapdir2 9090 > VERSION director 1 0 > ME 127.0.0.1 9090 > [root@imapdir2 ~]# nc imapdir1 9090 > VERSION director 1 0 > ME 127.0.0.1 9090 "doveadm director ring status" always reports failure of the peer: > [root@imapdir1 ~]# doveadm director ring status > director ip port type last > failed > 127.0.0.1 9090 self > never > 132.198.100.150 9090 2011-10-04 > 13:28:55 > [root@imapdir2 ~]# doveadm director ring status > director ip port type last > failed > 127.0.0.1 9090 self > never > 132.198.100.149 9090 2011-10-04 > 13:24:08 Has anyone else seen this? FWIW, a single-node director works fine, proxying IMAP, LMTP and POP. I'm guessing I have a broken config, but if I do I can't figure it out. Hope I'm not missing something *too* obvious... Here's doveconf -n from imapdir1: # 2.0.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-274.3.1.el5 x86_64 Red Hat Enterprise Linux Server release 5.7 (Tikanga) base_dir = /var/run/dovecot/ director_mail_servers = penguina.uvm.edu penguinb.uvm.edu penguinc.uvm.edu director_servers = imapdir1.uvm.edu imapdir2.uvm.edu lmtp_proxy = yes login_trusted_networks = 132.198.101.211,132.198.101.212,132.198.101.213,132.198.101.214,132.198.101.215,132.198.101.216,132.198.100.45,132.198.100.46,132.198.100.47 passdb { args = proxy=y nopassword=y protocol=smtp driver = static } service auth { unix_listener auth-userdb { group = mail mode = 0660 user = dovecot } } service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { port = 9090 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service imap-login { executable = imap-login director } service lmtp { client_limit = 1 inet_listener lmtp { port = 24 } unix_listener /var/lib/dovecot/lmtp-socket { group = root mode = 0600 user = root } } Best, Jim

1 1

[Dovecot] Dovecot + managesieve + ldap not working
by Philip Brechler 05 Oct '11

05 Oct '11

Hi, I want to use managesieve in my dovecot server which uses virtual users and a ldap for the users. This is in my dovecot.conf: # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 3.0.0-x86_64-jb1 x86_64 Debian 6.0.1 ext3 log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot-info.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps managesieve listen(default): * listen(imap): * listen(managesieve): *:2000 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_privileged_group: mail mail_uid: 5000 mail_gid: 5000 mail_location: maildir:/var/mail/%u/Maildir mail_debug: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve lda: postmaster_address: pbrechler(a)piratenfraktion-berlin.de mail_plugins: sieve mail_plugin_dir: /usr/lib/dovecot/modules/lda auth default: mechanisms: plain login verbose: yes debug: yes passdb: driver: pam passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: sieve_dir: /var/mail/sievescript/%u_scripts/ sieve_extensions: +imapflags And my ldap conf: hosts = ldap.piratenfraktion-berlin.de auth_bind = yes auth_bind_userdn = uid=%u,ou=people,dc=domain,dc=de ldap_version = 3 base = dc=domaindc=de deref = never scope = subtree user_attrs = uid=mail=maildir:/var/mail/%$/Maildir/ user_filter = (|(&(objectClass=organizationalPerson)(uid=%Ln))(&(objectClass=organizationalPerson)(mail=%Lu))) pass_attrs = uid=user,userPassword=password pass_filter = (&(objectClass=organizationalPerson)(uid=%u)) If I try to talk to managesieve with telnet this happens: Trying ::1... Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. "IMPLEMENTATION" "dovecot" "SIEVE" "fileinto reject envelope encoded-character vacation subaddress comparator- i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date imapflags" "SASL" "PLAIN LOGIN" "STARTTLS" "NOTIFY" "mailto" "VERSION" "1.0" OK "Dovecot ready." # ca. 2 Seconds pause AUTHENTICATE "PLAIN" "xxxxxxxxxxxxx" BYE "Internal error occured. Refer to server log for more information. [2011-10-02 00:48:09]" Connection closed by foreign host. Dies is a log reading 2011-10-02 00:48:09 MANAGESIEVE(user): Fatal: Failed to create sieve storage with data: /var/mail/sievescript/user_scripts But the permissions are 775 dovecot:dovecot and the system tells me that dovecot was the last user who had access to the directory. Can someone help me? Thanks! kind regards Philip Brechler

2 3

[Dovecot] doveadm(user001): Fatal: passdb lookup failed
by mailing lists 05 Oct '11

05 Oct '11

Hello all, why I can run whis command: imap1:~ # doveadm user user001 userdb: user001 mail : maildir:/var/maildir/vol04/4/46/user001 home : /var/mailfilter/vol04/4/46/user001 quota_rule: *:bytes=100000000 but not this one: imap1:~ # doveadm quota get -u user001 doveadm(user001): Error: user user001: Auth PASS lookup failed doveadm(user001): Fatal: passdb lookup failed what I'm missing ? /-------------------/ imap1:/etc/dovecot # grep ^[^#] dovecot-ldap.conf.ext uris = ldap://ldap.example.com dn = cn=admin,dc=example,dc=com dnpass = secret sasl_bind = no tls = no auth_bind = yes ldap_version = 3 base = dc=example,dc=com deref = never scope = subtree user_attrs = mailbox=mail=maildir:/var/maildir/%$,homeFilter=home,mailQuota=quota_rule=*:bytes=%$ user_filter = (&(objectClass=CourierMailAccount)(uid=%n)) pass_attrs = uid=user,userPassword=password pass_filter = (&(objectClass=CourierMailAccount)(uid=%n)) iterate_filter = (objectClass=CourierMailAccount) imap1:/etc/dovecot # dovecot -n # 2.0.14: /etc/dovecot/dovecot.conf # OS: Linux 2.6.34.7-0.7-xen x86_64 openSUSE 11.3 (x86_64) auth_debug = yes auth_verbose = yes base_dir = /var/run/dovecot/ disable_plaintext_auth = no doveadm_proxy_port = 24244 doveadm_socket_path = localhost:24244 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes mail_debug = yes mail_fsync = always mail_gid = 5000 mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = acl quota notify quota = maildir:User Quota quota_exceeded_message = Quota exceded quota_rule2 = Trash:storage=+50M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=90%% quota-warning 90 %u mail_uid = 5000 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mmap_disable = yes namespace { inbox = yes list = yes location = prefix = separator = . subscriptions = yes } namespace { hidden = yes inbox = no list = no location = prefix = INBOX. separator = . subscriptions = no } namespace { list = children location = maildir:/var/virtual-maildir/%%n:INDEX=~/shared.%%n prefix = shared.%%n. separator = . subscriptions = no type = shared } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_shared_dict = file:/var/maildir/shared-mailboxes mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename flag_change append mail_log_fields = uid box msgid from subject size vsize flags mail_plugins = " mail_log notify" sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } postmaster_address = nonresponse(a)example.com service auth { unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } } service dict { unix_listener dict { group = vmail mode = 0600 user = vmail } } service doveadm { inet_listener { port = 24244 } } service imap { process_limit = 1024 } service lmtp { inet_listener lmtp { port = 24 } unix_listener lmtp { group = vmail mode = 0666 user = vmail } } service pop3-login { inet_listener pop3 { port = 110 } } service pop3 { process_limit = 1024 } service quota-warning { executable = script /etc/dovecot/quota-warning.sh user = vmail } ssl = no userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes protocol lmtp { mail_plugins = acl quota notify sieve } protocol lda { mail_plugins = acl quota notify sieve } protocol imap { mail_max_userip_connections = 100 mail_plugins = acl quota notify imap_acl autocreate imap_quota } protocol pop3 { pop3_uidl_format = %v-%u } local 100.1.245.101/28/28 { doveadm_password = secret }

1 0

[Dovecot] sieve vacation reply
by Wojciech Giel 04 Oct '11

04 Oct '11

Hi, I'm configuring postfix with dovecot and roundcube. I'm using flat files as passwdb userdb. Everything works fine except sieve vacation reply. when i send mail from ex. user dennis to tytus I get "discarding vacation response for message implicitly delivered to". What Am i doing wrong? thanks sieve: using sieve path for user's script: /home/tytus/.dovecot.sieve 2011-05-17 16:56:45 deliver(tytus): Info: sieve: opening script /home/tytus/.dovecot.sieve 2011-05-17 16:56:45 deliver(tytus): Info: sieve: executing compiled script /home/tytus/.dovecot.sieve 2011-05-17 16:56:45 deliver(tytus): Info: sieve: msgid=<20110517155641.GA3452(a)badger.example.com>: discarding vacation response for message implicitly delivered to <tytus@badger> /etc/postfix/main.cf ... mailbox_command = /usr/lib/dovecot/deliver -n -m "${EXTENSION}" ... # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.1 log_path: /var/log/dovecot.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps managesieve listen(default): * listen(imap): * listen(managesieve): 127.0.0.1:2000 ssl_ca_file: /etc/postfix/ssl/cacert.pem ssl_cert_file: /etc/postfix/ssl/servercrt.pem ssl_key_file: /etc/postfix/ssl/serverkey.pem ssl_cipher_list: ALL:!LOW:!SSLv2 login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_location: maildir:~/Maildir:INDEX=~/Maildir/indexes mail_debug: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota imap_quota autocreate mail_plugins(imap): quota imap_quota autocreate mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve imap_client_workarounds(default): tb-extra-mailbox-sep netscape-eoh delay-newmail outlook-idle imap_client_workarounds(imap): tb-extra-mailbox-sep netscape-eoh delay-newmail outlook-idle imap_client_workarounds(managesieve): lda: postmaster_address: postmaster mail_plugins: sieve quota autocreate quota_full_tempfail: yes deliver_log_format: msgid=%m: %$ rejection_reason: Your message to <%t> was automatically rejected:%n%r log_path: /var/log/sieve.log auth default: mechanisms: plain login cram-md5 verbose: yes debug: yes debug_passwords: yes passdb: driver: pam passdb: driver: passwd-file args: scheme=cram-md5 /etc/dovecot/passwd userdb: driver: passwd-file args: /etc/dovecot/passwd userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/dovecot-auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 plugin: sieve: ~/.dovecot.sieve sieve_dir: ~/sieve autocreate: INBOX autocreate2: Sent autocreate3: Trash autocreate4: Drafts autocreate5: Junk autosubscribe: INBOX autosubscribe2: Sent autosubscribe3: Trash autosubscribe4: Drafts autosubscribe5: Junk quota: maildir:User quota quota_rule: Trash:storage=10M quota_warning: storage=85%% /usr/bin/dovecot-quota-warning.sh 85 quota_warning2: storage=90%% /usr/bin/dovecot-quota-warning.sh 90 quota_warning3: storage=95%% /usr/bin/dovecot-quota-warning.sh 95

5 7

[Dovecot] Missing man page for doveadm move
by Jeetu 04 Oct '11

04 Oct '11

Hi, i cant see man pages for doveadm-move, though the command "doveadm move ..." works on new version of dovecot. http://hg.dovecot.org/dovecot-2.0/rev/d7a02077d91f -- -Jeetu

2 2

[Dovecot] What best decision to make for flatfiles or SQL when I use Dovecot2 + Postfix together?
by terryjames9461＠mm.st 04 Oct '11

04 Oct '11

Hello, I'm moving my mail server from Exchange to an opensource one. After a bunch of reading, I decided on building a Dovecot2 + Postfix server in a VirtualUsers-only + Multiple-domains configuration. Since my messages will be stored by Dovecot, and the documentation is really good, I figured that it's smartest to configure Dovecot, then make Postfix 'fit' to it, sharing the data files that way. I read through lots of the Dovecot wiki for v2. There are many ways for storing the database data. My goal is to only have data in one instances, used by both Postfix & Dovecot. I'm a little confused about: to do that sharing-in-one-place, do I have to use SQL or can I use the flatfiles like passwd-db? I think for sure someone already decided the best approach for this, and maybe I'm not understanding the logic to it. The data I think I need to share are: users (user(a)domain.com) passwords user aliases (mapping user2(a)domain.com -> user1(a)domain.com) domains domain aliases (domain.com also receives email for domain2.com) And I think all of this can be in passwd-db in Dovecot. But I also want to make sure that Postfix ONLY accepts email for users/domains that exist, so it has to read that data too. Can I do this that way with the flatfiles? Or do I have to use the SQL approach? TJ

12 20

Re: [Dovecot] SSL only for external connections
by Joseph Tam 04 Oct '11

04 Oct '11

On Sun, 2 Oct 2011, Simon Brereton writes: > I don't have that file. Part of the problem is that I'm confused > between protocols and wrappers and interfaces :) Dick and Michael have > persuaded me that it's just easier to for Horde not to ask for TLS on > port 143 - because that's in fact what I was doing - and it's > pointless. > > Nonetheless, I think it would be nice to tell Dovecot listen on the > local interface for IMAP. Listen on the external interface for IMAP, > IMAPS, POP and POP3S. But if there's not simple way to do that I don't > have a valid use-case for doing it right now. I got into this thread rather late so maybe I missed something here. If you have different policies for your interface, you can run two different instances of dovecot (with 2 different base directories and sets of configuration files). I haven't tried it, but maybe it's also possible have interface specific CAPA strings and remove STARTTLS. Dovecot will support unencrypted sessions over the localhost interface, but your webmail seems to opportunistcally use it when offered, so don't offer it. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Intermittent authentication failures
by Eric Shubert 03 Oct '11

03 Oct '11

I'm running dovecot with vpopmail. Here's the configuration: [root@wong log]# dovecot -n # 2.0.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-238.9.1.el5 i686 CentOS release 5.6 (Final) auth_cache_size = 32 M auth_mechanisms = plain login digest-md5 cram-md5 auth_username_format = %Lu first_valid_uid = 89 log_path = /var/log/dovecot.log login_greeting = Dovecot toaster ready. mail_fsync = always mail_nfs_index = yes mail_nfs_storage = yes mmap_disable = yes namespace { inbox = yes location = prefix = separator = . type = private } passdb { args = cache_key=%u webmail=127.0.0.1 driver = vpopmail } plugin/quota = maildir protocols = imap ssl_cert = </var/qmail/control/servercert.pem ssl_key = </var/qmail/control/servercert.pem userdb { args = cache_key=%u quota_template=quota_rule=*:backend=%q driver = vpopmail } protocol imap { imap_client_workarounds = delay-newmail } Most clients use TLS and PLAIN login for verification, which works flawlessly. I also run SquirrelMail that is slightly dated and has no TLS capability, so it is using CRAM-MD5. CRAM-MD5 works sometimes: Sep 30 08:15:43 imap-login: Info: Login: user=<userA(a)domain.com>, method=CRAM-MD5, rip=192.168.252.8, lip=192.168.252.14, mpid=20301 but (seemingly more frequently) the authentication fails: Sep 30 08:16:41 imap-login: Info: Aborted login (auth failed, 1 attempts): user=<userA(a)domain.com>, method=CRAM-MD5, rip=192.168.252.8, lip=192.168.252.14 I restarted dovecot, and that apparently cleared the problem for one user, but not others. Is this perhaps a bug in dovecot, or would the problem lie with vpopmail? TIA for any pointers. -- -Eric 'shubes'

2 6

[Dovecot] Multiple LDAP authentication servers
by Romer Ventura 03 Oct '11

03 Oct '11

Hello, We are performing a Domain migration and I was wondering if there was any way to get Dovecot to authenticate to more than 1 LDAP server? Currently dovecot is configure to query the "mail" attribute from Active Directory and when found it binds with the credentials the user provided. This works fine, but when migrating user accounts, they get disabled in the source domain so that the user can no longer log on to it. But disabling the account in the source domain, causes the user to be unable to use his email account. Is there any way to get dovecot to try a second LDAP server if the first one fails to authenticate..? ~# dovecot -n # 1.2.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.29-xs5.5.0.15 i686 Debian 5.0.4 ext3 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps imap ssl_cert_file: /etc/ssl/certs/smtpd.crt ssl_key_file: /etc/ssl/private/smtpd.key login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login login_user: postfix mail_privileged_group: mail mail_uid: vmail mail_gid: vmail mail_location: maildir:/srv/mail/vmail/%Ud/%Ln/Maildir mbox_write_locks: fcntl dotlock imap_client_workarounds: delay-newmail outlook-idle netscape-eoh lda: postmaster_address: postmaster(a)h-st.com auth_socket_path: /var/run/dovecot/auth-master log_path: /var/log/dovecot-deliver.log info_log_path: /var/log/dovecot-deliver-info.log auth default: mechanisms: plain login passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen client: path: /var/spool/postfix/private/auth-client mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail Thanks -------- Romer Ventura

2 4

[Dovecot] clarifications on shared mailboxes
by Frank Bonnet 03 Oct '11

03 Oct '11

Hello I need some clarifications on shared mailboxes. Actually we use MBOX format with "real" unix users , but I've been asked to create some shared mailboxes for some users who need to have some for their working groups. What would be the best way to create those shared mailboxes ? Would it be possible to create some "shared space" on the server in maildir format to get advantage of the last seen flag ? If yes some config examples would be a great help. See attach the doveconf -n output ( certificates names have been obscured ;-) ) Thank you.

1 0

[Dovecot] 1.2.17 Program terminated with signal 11, Segmentation fault.
by Andrew Hearn 03 Oct '11

03 Oct '11

Hello, We've had seg faults a couple of times a day on our servers, we upgraded to 1.2.17 and still have them. running a coredump through dbg says: Reading symbols from /usr/local/libexec/dovecot/imap-login...done. [New Thread 27962] Reading symbols from /lib64/ld-linux-x86-64.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/ld-linux-x86-64.so.2 warning: no loadable sections found in added symbol-file system-supplied DSO at 0x7fff083f4000 Core was generated by `imap-login -D'. Program terminated with signal 11, Segmentation fault. #0 0x000000000041388b in io_file_unlink (_io=<value optimized out>, closed=true) at ioloop.c:70 70 if (io->next != NULL) dovecot -n is at http://pastebin.ca/SQjrseJD (pass timo) Linux 2.6.18-274.3.1.el5 #1 SMP Tue Sep 6 20:13:52 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux We use NFS for mail store, and ramdisk for dovecot indexes. We do run the mail_log plugin. Let me know if you need any more info though. -- Andrew Hearn. AAISP Technical Support Team Leader Tel: 03333 400999

1 0

[Dovecot] problem with getting outlook to work with IMAP server
by Daminto Lie 03 Oct '11

03 Oct '11

Hi, I am having difficulty in getting the outlook 2010 to connect to my server running on Ubuntu Server 10.04. I can login to Squirrelmail webmail, and am able to send & receive emails through squirrelmail with no problem whatsoever. However, this morning, I was trying to add a new account for the same user on Outlook 2010 and I got the following error from outlook as follows Send test e-mail message: Your outgoing (SMTP) e-mail server has reported an internal error. The server responded: 554 5.7.7 No Spoofing Allowed. I then, went to check /var/log/mail.log and I found the following Oct 3 12:19:27 mymailServer dovecot: auth(default): ldap(sbernett,50.4.39.163): pass search: base=ou=accounts,dc=example,dc=com scope=subtree filter=(&(objectClass=posixAccount)(uid=sbernett)) fields=uid,userPassword,homeDirectory,uidNumber,gidNumber Oct 3 12:19:27 mymailServer dovecot: auth(default): ldap(sbernett,50.4.39.163): result: uid(user)=sbernett uidNumber(userdb_uid)=106 gidNumber(userdb_gid)=106 userPassword(password)={CRYPT}xGHI86Ktls homeDirectory(userdb_home)=/home/vmail/sbernett Oct 3 12:19:27 mymailServer dovecot: auth(default): client out: OK#0111#011user=sbernett Oct 3 12:19:27 mymailServer dovecot: auth(default): master in: REQUEST#0114#0112686#0111 Oct 3 12:19:27 mymailServer dovecot: auth(default): passwd(sbernett,50.4.39.163): lookup Oct 3 12:19:27 mymailServer dovecot: auth(default): passwd(sbernett,50.4.39.163): unknown user Oct 3 12:19:27 mymailServer dovecot: auth(default): master out: USER#0114#011sbernett#011uid=106#011gid=106#011home=/home/vmail/sbernett Oct 3 12:19:27 mymailServer dovecot: imap-login: Login: user=<sbernett>, method=PLAIN, rip=50.4.39.163, lip=50.4.39.164 Oct 3 12:19:27 mymailServer dovecot: IMAP(sbernett): Disconnected in IDLE bytes=9/292 Oct 3 12:19:27 mymailServer postfix/smtpd[2766]: warning: No server certs available. TLS won't be enabled Oct 3 12:19:27 mymailServer postfix/smtpd[2766]: connect from localhost[127.0.0.1] Oct 3 12:19:27 mymailServer postfix/smtpd[2766]: 182292400AE: client=localhost[127.0.0.1] Oct 3 12:19:27 mymailServer postfix/smtpd[2766]: lost connection after DATA (0 bytes) from localhost[127.0.0.1] Oct 3 12:19:27 mymailServer postfix/smtpd[2766]: disconnect from localhost[127.0.0.1] Next, I tried to see if there are any the difference in the mail.log when logging into the squirrelmail (which is working for me) Oct 3 12:31:32 mymailServer dovecot: auth(default): ldap(sbernett,127.0.0.1): pass search: base=ou=accounts,dc=example,dc=com scope=subtree filter=(&(objectClass=posixAccount)(uid=sbernett)) fields=uid,userPassword,homeDirectory,uidNumber,gidNumber Oct 3 12:31:32 mymailServer dovecot: auth(default): ldap(sbernett,127.0.0.1): result: uid(user)=sbernett uidNumber(userdb_uid)=106 gidNumber(userdb_gid)=106 userPassword(password)={CRYPT}xGHI86Ktls homeDirectory(userdb_home)=/home/vmail/sbernett Oct 3 12:31:32 mymailServer dovecot: auth(default): client out: OK#0111#011user=sbernett Oct 3 12:31:32 mymailServer dovecot: auth(default): master in: REQUEST#0114#0112485#0111 Oct 3 12:31:32 mymailServer dovecot: auth(default): passwd(sbernett,127.0.0.1): lookup Oct 3 12:31:32 mymailServer dovecot: auth(default): passwd(sbernett,127.0.0.1): unknown user Oct 3 12:31:32 mymailServer dovecot: auth(default): master out: USER#0114#011sbernett#011uid=1004#011gid=1004#011home=/home/vmail/sbernett Oct 3 12:31:32 mymailServer dovecot: imap-login: Login: user=<sbernett>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured The only thing I noticed different between the two is the IP addresses in rip and lip. Is there a way to tell the IMAP server to allow the remote IP addresses to connect. Here is my dovecot.conf # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-34-generic-pae i686 Ubuntu 10.04.3 LTS ext4 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap listen: *:143 ssl: no disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login verbose_proctitle: yes first_valid_uid: 106 last_valid_uid: 1000 mail_privileged_group: mail mail_location: maildir:/home/vmail/%u/Maildir mbox_write_locks: fcntl dotlock mail_plugins: quota imap_quota imap_client_workarounds: delay-newmail outlook-idle netscape-eoh lda: postmaster_address: postmaster(a)mailtest.dyndns-free.com mail_plugins: quota sendmail_path: /usr/lib/sendmail rejection_reason: Your message to <%t> was automatically rejected:%n%r auth_socket_path: /var/run/dovecot-auth-master auth default: mechanisms: plain login username_format: %Lu verbose: yes debug: yes debug_passwords: yes passdb: driver: pam passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: passwd userdb: driver: static args: uid=106 gid=106 home=/home/vmail/%u allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: mail master: path: /var/run/dovecot-auth-master mode: 432 user: vmail group: vmail plugin: quota: maildir quota_rule: *:storage=3GB quota_rule2: Trash:storage=20%% quota_rule3: Spam:storage=10%% quota_warning: storage=95%% /usr/local/bin/quota-warning.sh 95 quota_warning2: storage=80%% /usr/local/bin/quota-warning.sh 80 Here is my postfix.cf myhostname = mymailserver mydomain = example.com mydestination = localhost.$mydomain,localhost,$mydomain,$myhostname local_recipient_maps = ldap:/etc/postfix/ldap-user-auth.cf virtual_transport = dovecot virtual_mailbox_domains = vexample.com virtual_mailbox_base = /home/vmail virtual_mailbox_maps = hash:/etc/postfix/virtual_mailboxes virtual_minimum_uid = 100 virtual_uid_maps = static:106 virtual_gid_maps = static:106 relayhost = mynetworks = 127.0.0.0/8, 192.168.1.0/24, 50.4.39.163, 50.4.39.164 mynetworks_style = subnet mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = ipv4 mail_spool_directory = /var/spool/mail smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_exceptions_networks = $mynetworks smtpd_sasl_security_options = noanonymous, noplaintext smtpd_sasl_tls_security_options = noanomymous smtpd_tls_auth_only = yes smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination,reject_sender_login_mismatch smtpd_sasl_local_domain = vexample.com dovecot_destination_recipient_limit = 1 Any help would be greatly appreciated. Thank you

1 0

Re: [Dovecot] FTS and compound searches
by Nikolai Schupbach 01 Oct '11

01 Oct '11

>> New subscriber here. I noticed that the FTS index is not used in compound searches. >> Is this expected? Tested in 2.0.0 and 2.0.8: > >Yep. It's been in TODO for a while. I know this thread is quite old, but we have the same issue with v2.0.14 and squat. Would this issue also affect the Solr FTS backend? Thanks, Nikolai.

2 1

Re: [Dovecot] Error message in log
by Joseph Tam 01 Oct '11

01 Oct '11

On Fri, 30 Sep 2011, Knute Johnson wrote: > I'm getting the following message in my log; > > dovecot: IMAP(knute): > fchown(/home/knute/mail/.imap/INBOX/dovecot.index.tmp, -1, 8(mail)) > failed: Operation not permitted (egid=1000(knute), group based on > /var/mail/knute): 4 Time(s) > > I got these once before on the /var/mail/user files and changed the > permissions to 600. /home/knute/mail/.imap/INBOX is 770 and the index > files are 600. Is this a problem with the directory privilege? Probably. This was discussed a few times before. Check the mailing list archives. Dovecot tries to retain the same file access for the indices as the mailbox/message file it indexes; if the permissions allow access to the group, but the owner is not part of that group, then the dovecot process (which sets UID to the owner) cannot recreate the same permissions, hence the error. Either change the group ownership of "/var/mail/knute", put user "knute" in group "mail", or chmod it to 0600. The last one is probably the best solution. And fix the problem that created these permissions in the first place. Check your other users (if you have any) for the same situation. Joseph Tam <jtam.home(a)gmail.com>

1 0

Re: [Dovecot] SSL only for external connections
by Dick Middleton 30 Sep '11

30 Sep '11

On 09/30/11 20:25, Simon Brereton wrote: > But the question remains - if only because it's now there - how does one limit services effectively in Dovecot. In Courier it was fairly easy and well documented. There's no reason for me to offer IMAPS or POP3S to localhost (because of the certificate issue) and there's also no reason for me to offer POP3 to localhost either. > > For posterity and for my own edification it would be nice to know how to do that. I don't think you can do that. However if you don't want to use tls/ssl just connect to port 143 plain. I don't know about horde but Roundcube you use tls://localhost, ssl://locahost or just localhost. i.e the choice is with the client not the server. Dick

3 2

Re: [Dovecot] SSL only for external connections
by Michael M Slusarz 30 Sep '11

30 Sep '11

Quoting Simon Brereton <simon.brereton(a)buongiorno.com>: >> -----Original Message----- >> From: dovecot-bounces(a)dovecot.org [mailto:dovecot- >> bounces(a)dovecot.org] On Behalf Of Stan Hoeppner >> On 9/30/2011 12:34 PM, Simon Brereton wrote: >> >> -----Original Message----- >> >> From: dovecot-bounces(a)dovecot.org [mailto:dovecot- >> >> bounces(a)dovecot.org] On Behalf Of Terry Carmen >> > >> >> >> >> If SSL/TLS works from the outside, but not the inside, you should >> >> probably find out why and fix that instead. >> > >> > You'd think so - but since I don't actually need TLS from the >> inside, >> > and given my skill level - disabling it seems easier :) >> >> You don't need TLS/SSL from the outside either, if this is strictly a >> webmail box. In this case, configure Apache/lighttpd+Horde to only >> accept HTTPS connections from the outside, and configure Horde to >> connect via the Dovecot localhost:143 listener. This is how I've >> been doing it with Roundcube for years. Works like a champ. > > It's not strictly a webmail box though. IMAP clients (fixed and > mobile) connect to it. So what I'd like is IMAP, IMAPS, POP3 and > POP3S on the outside and IMAP only on the local host (there's no > actual reason to offer POP to the localhost either... You can also configure the MUA (e.g. Horde) to not use a secure connection, as opposed to turning off features on the server level. michael

2 1

Re: [Dovecot] SSL only for external connections
by Michael M Slusarz 30 Sep '11

30 Sep '11

Quoting Simon Brereton <simon.brereton(a)buongiorno.com>: > But the question remains - if only because it's now there - how does > one limit services effectively in Dovecot. In Courier it was fairly > easy and well documented. There's no reason for me to offer IMAPS > or POP3S to localhost (because of the certificate issue) and there's > also no reason for me to offer POP3 to localhost either. > > For posterity and for my own edification it would be nice to know > how to do that. At a minimum, you can't disable TLS. If you disable TLS support in dovecot, the server is no longer IMAP 4rev1 compliant (see RFC 3501 [6.1.1] - STARTTLS MUST be supported by server). michael

1 0

[Dovecot] SSL only for external connections
by Terry Carmen 30 Sep '11

30 Sep '11

If SSL/TLS works from the outside, but not the inside, you should probably find out why and fix that instead. What is the actual error text? Terry -- Terry Carmen CNY Support, LLC https://www.cnysupport.com

3 3

Re: [Dovecot] SSL only for external connections
by Stan Hoeppner 30 Sep '11

30 Sep '11

On 9/30/2011 12:34 PM, Simon Brereton wrote: >> -----Original Message----- >> From: dovecot-bounces(a)dovecot.org [mailto:dovecot- >> bounces(a)dovecot.org] On Behalf Of Terry Carmen > >> >> If SSL/TLS works from the outside, but not the inside, you should >> probably find out why and fix that instead. > > You'd think so - but since I don't actually need TLS from the inside, and given my skill level - disabling it seems easier :) You don't need TLS/SSL from the outside either, if this is strictly a webmail box. In this case, configure Apache/lighttpd+Horde to only accept HTTPS connections from the outside, and configure Horde to connect via the Dovecot localhost:143 listener. This is how I've been doing it with Roundcube for years. Works like a champ. With encrypted sessions between browser and web server, and both Horde and Dovecot running on the same host, you don't need to, nor want to, use IMAPS. -- Stan

2 1

[Dovecot] SSL only for external connections
by Simon Brereton 30 Sep '11

30 Sep '11

Hi I'm running dovecot 1:1.2.15-7 and php webmail application is throwing errors when connecting to IMAP with TLS. Is there away to disable SSL/TLS for localhost connections? I googled, but didn't see anything specific. Can I assume that it's as simple as setting ssl_listen = to the external IP address(es) and leaving listen = * as it is? Thanks. Simon

1 0

[Dovecot] Panic: file lmtp-proxy.c: line 370 (lmtp_proxy_output_timeout): assertion failed: (proxy->data_input->eof)
by mailing lists 30 Sep '11

30 Sep '11

Hello all, today I got this crash from dovecot (2.0.14) Sep 29 14:09:32 imap1 dovecot: lmtp(17693): Panic: file lmtp-proxy.c: line 370 (lmtp_proxy_output_timeout): assertion failed: (proxy->data_input->eof) Sep 29 14:09:32 imap1 dovecot: lmtp(17693): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0x3f9aa) [0x7f18f10299aa] -> /usr/lib64/dovecot/libdovecot.so.0(+0x3f9f6) [0x7f18f10299f6] -> /usr/lib64/dovecot/libdovecot.so.0(i_fatal+0) [0x7f18f1003211] -> dovecot/lmtp(+0x7a4f) [0x7f18f1982a4f] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handle_timeouts+0xcb) [0x7f18f103590b] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run+0x5b) [0x7f18f103680b] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f18f1035768] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f18f1023423] -> dovecot/lmtp(main+0x183) [0x7f18f197fa93] -> /lib64/libc.so.6(__libc_start_main+0xfd) [0x7f18f0ca8b7d] -> dovecot/lmtp(+0x4819) [0x7f18f197f819] Sep 29 14:09:32 imap1 dovecot: master: Error: service(lmtp): child 17693 killed with signal 6 (core dumps disabled) /-----------------/ # dovecot -n -c /etc/dovecot-director/dovecot.conf # 2.0.14: /etc/dovecot-director/dovecot.conf # OS: Linux 2.6.34.7-0.7-xen x86_64 openSUSE 11.3 (x86_64) auth_debug = yes auth_verbose = yes base_dir = /var/run/dovecot-director/ director_mail_servers = 100.1.245.101 100.1.245.105 director_servers = 100.1.245.101:9091 100.1.245.105:9091 100.1.241.204:9091 disable_plaintext_auth = no doveadm_proxy_port = 24245 lmtp_proxy = yes mail_debug = yes mail_fsync = always mail_gid = 5000 mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = acl mail_uid = 5000 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mmap_disable = yes passdb { args = proxy=y nopassword=y driver = static } plugin { acl = vfile sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap lmtp pop3 service auth { unix_listener auth-userdb { group = vmail mode = 0666 user = vmail } } service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { port = 9091 } unix_listener director-userdb { mode = 0666 } unix_listener login/director { mode = 0666 } } service doveadm { inet_listener { port = 24245 } } service imap-login { executable = imap-login director inet_listener imap { port = 10143 } } service lmtp { inet_listener lmtp { port = 1024 } } service pop3-login { executable = pop3-login director inet_listener pop3 { port = 10110 } } ssl = no verbose_proctitle = yes protocol lmtp { auth_socket_path = director-userdb passdb { args = proxy=y nopassword=y port=24 driver = static } } protocol imap { mail_max_userip_connections = 100 } local 100.1.245.101/28/28 { doveadm_password = secret }

2 1

[Dovecot] Error message in log
by Knute Johnson 30 Sep '11

30 Sep '11

I'm getting the following message in my log; dovecot: IMAP(knute): fchown(/home/knute/mail/.imap/INBOX/dovecot.index.cache.lock, -1, 8(mail)) failed: Operation not permitted (egid=1000(knute), group based on /var/mail/knute): 1 Time(s) dovecot: IMAP(knute): fchown(/home/knute/mail/.imap/INBOX/dovecot.index.log.newlock, -1, 8(mail)) failed: Operation not permitted (egid=1000(knute), group based on /var/mail/knute): 2 Time(s) dovecot: IMAP(knute): fchown(/home/knute/mail/.imap/INBOX/dovecot.index.tmp, -1, 8(mail)) failed: Operation not permitted (egid=1000(knute), group based on /var/mail/knute): 4 Time(s) I got these once before on the /var/mail/user files and changed the permissions to 600. /home/knute/mail/.imap/INBOX is 770 and the index files are 600. Is this a problem with the directory privilege? Thanks, -- Knute Johnson knute2011(a)knutejohnson.com

1 0

[Dovecot] Broken mail clients? [MIME] Long attachment encoded filenames (for non-ASCII characters etc)
by Andrew Richards 30 Sep '11

30 Sep '11

Hi, I've noticed a possible minor issue with long encoded filenames for attachments where these filenames are split across multiple lines. My understanding of character encoding and MIME is not as good as it should be, so I may easily have got this all mixed up, in which case sorry for the noise... Although I understand the preferred method for handling filenames split across multiple lines (because they're too long to fit on one line in the message) is that suggested in RFC2184/2231, so for example, filename*0*=iso-8859-1''accented_characters_here_%EA%CA%E6 filename*1=etc%2Epdf I find that some mail clients do this instead, filename="=?ISO-8859-1?Q?accented_characters_here_=EA=CA=E6?= =?ISO-8859-1?Q?etc=2Epdf?=" In Dovecot this results in, 0 fetch 25 body * 25 FETCH (BODY (("text" "plain" ("charset" "ISO-8859-1") NIL NIL "7bit" 239 8)("application" "pdf" ("name" "=?ISO-8859-1?Q?accented_characters_here_=EA=CA=E6?= =?ISO-8859-1?Q?etc=2Epdf?=") NIL NIL "base64" 219130) "mixed")) esp. note the unwanted space - or in fact the sequence ?= =? between the two sections of the filename. I think a possible tweak for Dovecot would be to combine the filename parts in this situation to remove the ?= =?. I'm not sure if an IMAP client should know to combine the parts in their current format. FWIW I see that Courier does the same as Dovecot in this situation. I think the 'alternative' method of splitting filenames I'm raising breaks RFC2047 (details below), but unfortunately this method is used by some large email generators like gmail - also details below. Key bits from RFC2047 section 5 part (3) re. only a single encoded-word ('phrase') being allowed for a MIME Content-Type / Content-Disposition: phrase = 1*( encoded-word / word ) An 'encoded-word' MUST NOT be used in parameter of a MIME Content-Type or Content-Disposition field, or in any structured field body except within a 'comment' or 'phrase'. Here are the mail clients I noted this issue with (original filenames destroyed because I've been examining my client's emails for this issue - with their permission), (AOL) X-Mailer: Webmail 33953-STANDARD Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="=?utf-8?Q?abcde?= =?utf-8?Q?abcde=C3=A9abcde.jpg?=" Content-Type: image/jpeg; name="=?utf-8?Q?abcde?= =?utf-8?Q?abcde=C3=A9abcde.jpg?=" Gmail: Content-Type: application/pdf; name="=?ISO-8859-1?Q?with_a_=EA=CA=E6_super=2Dlong_name_that=27s_bound?= =?ISO-8859-1?Q?_to_overflow_a_line_boundary_to_test_gmail=2Epdf?=" Content-Disposition: attachment; filename="=?ISO-8859-1?Q?with_a_=EA=CA=E6_super=2Dlong_name_that=27s_bound?= =?ISO-8859-1?Q?_to_overflow_a_line_boundary_to_test_gmail=2Epdf?=" X-Mailer: YahooMailWebService/0.8.113.313619 Content-Type: application/vnd.openxmlformats- officedocument.wordprocessingml.document; name="=?utf-8?B?base64encodedstring?= =?utf-8?B?base64encodedstring?=" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="=?utf-8?B?base64encodedstring?= =?utf-8?B?base64encodedstring?=" X-Mailer: Lotus Notes Release 6.5.5 November 30, 2005: Content-type: application/pdf; name="=?ISO-8859-1?Q?abcde=E9abcde=E9abcde=E9?= =?ISO-8859-1?Q?abcde=2Cl=2Epdf?=" Content-Disposition: attachment; filename="=?ISO-8859-1?Q?abcde=E9abcde=E9_abcde=E9?= =?ISO-8859-1?Q?abcde=2Cl=2Epdf?=" Content-ID: <20__=snip> Content-transfer-encoding: base64 X-Mailer: Lotus Domino Web Server Release 6.5.5FP1 HF551 November 27, 2007: Content-type: application/pdf; name="=?windows-1252?Q?abcde_=28=E9?= =?windows-1252?Q?=29=2Epdf?=" Content-Disposition: attachment; filename="=?windows-1252?Q?abcde_=28=E9?= =?windows-1252?Q?=29=2Epdf?=" Content-transfer-encoding: base64 Timo also noted the same style of filename encoding in Apple Mail in the previous thread I started, it would be interesting to try Apple Mail with a very long filename to cause it to split across multiple lines and see how it encodes the filename then, > Looks like Apple Mail also sends: > > Content-Type: application/octet-stream; > > name="=?iso-8859-1?Q?p=E4=E4?=" Best regards, Andrew.

2 2

[Dovecot] Long attachment encoded filenames (for non-ASCII characters etc) in MIME headers & corresponding Dovecot behaviour
by Andrew Richards 30 Sep '11

30 Sep '11

(Correction: Subject was confused) Hi, I've noticed a possible minor issue with long encoded filenames for attachments where these filenames are split across multiple lines. My understanding of character encoding and MIME is not as good as it should be, so I may easily have got this all mixed up, in which case sorry for the noise... Although I understand the preferred method for handling filenames split across multiple lines (because they're too long to fit on one line in the message) is that suggested in RFC2184/2231, so for example, filename*0*=iso-8859-1''accented_characters_here_%EA%CA%E6 filename*1=etc%2Epdf I find that some mail clients do this instead, filename="=?ISO-8859-1?Q?accented_characters_here_=EA=CA=E6?= =?ISO-8859-1?Q?etc=2Epdf?=" In Dovecot this results in, 0 fetch 25 body * 25 FETCH (BODY (("text" "plain" ("charset" "ISO-8859-1") NIL NIL "7bit" 239 8)("application" "pdf" ("name" "=?ISO-8859-1?Q?accented_characters_here_=EA=CA=E6?= =?ISO-8859-1?Q?etc=2Epdf?=") NIL NIL "base64" 219130) "mixed")) esp. note the unwanted space - or in fact the sequence ?= =? between the two sections of the filename. I think a possible tweak for Dovecot would be to combine the filename parts in this situation to remove the ?= =?. I'm not sure if an IMAP client should know to combine the parts in their current format. FWIW I see that Courier does the same as Dovecot in this situation. I think the 'alternative' method of splitting filenames I'm raising breaks RFC2047 (details below), but unfortunately this method is used by some large email generators like gmail - also details below. Key bits from RFC2047 section 5 part (3) re. only a single encoded-word ('phrase') being allowed for a MIME Content-Type / Content-Disposition: phrase = 1*( encoded-word / word ) An 'encoded-word' MUST NOT be used in parameter of a MIME Content-Type or Content-Disposition field, or in any structured field body except within a 'comment' or 'phrase'. Here are the mail clients I noted this issue with (original filenames destroyed because I've been examining my client's emails for this issue - with their permission), (AOL) X-Mailer: Webmail 33953-STANDARD Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="=?utf-8?Q?abcde?= =?utf-8?Q?abcde=C3=A9abcde.jpg?=" Content-Type: image/jpeg; name="=?utf-8?Q?abcde?= =?utf-8?Q?abcde=C3=A9abcde.jpg?=" Gmail: Content-Type: application/pdf; name="=?ISO-8859-1?Q?with_a_=EA=CA=E6_super=2Dlong_name_that=27s_bound?= =?ISO-8859-1?Q?_to_overflow_a_line_boundary_to_test_gmail=2Epdf?=" Content-Disposition: attachment; filename="=?ISO-8859-1?Q?with_a_=EA=CA=E6_super=2Dlong_name_that=27s_bound?= =?ISO-8859-1?Q?_to_overflow_a_line_boundary_to_test_gmail=2Epdf?=" X-Mailer: YahooMailWebService/0.8.113.313619 Content-Type: application/vnd.openxmlformats- officedocument.wordprocessingml.document; name="=?utf-8?B?base64encodedstring?= =?utf-8?B?base64encodedstring?=" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="=?utf-8?B?base64encodedstring?= =?utf-8?B?base64encodedstring?=" X-Mailer: Lotus Notes Release 6.5.5 November 30, 2005: Content-type: application/pdf; name="=?ISO-8859-1?Q?abcde=E9abcde=E9abcde=E9?= =?ISO-8859-1?Q?abcde=2Cl=2Epdf?=" Content-Disposition: attachment; filename="=?ISO-8859-1?Q?abcde=E9abcde=E9_abcde=E9?= =?ISO-8859-1?Q?abcde=2Cl=2Epdf?=" Content-ID: <20__=snip> Content-transfer-encoding: base64 X-Mailer: Lotus Domino Web Server Release 6.5.5FP1 HF551 November 27, 2007: Content-type: application/pdf; name="=?windows-1252?Q?abcde_=28=E9?= =?windows-1252?Q?=29=2Epdf?=" Content-Disposition: attachment; filename="=?windows-1252?Q?abcde_=28=E9?= =?windows-1252?Q?=29=2Epdf?=" Content-transfer-encoding: base64 Timo also noted the same style of filename encoding in Apple Mail in the previous thread I started, it would be interesting to try Apple Mail with a very long filename to cause it to split across multiple lines and see how it encodes the filename then, > Looks like Apple Mail also sends: > > Content-Type: application/octet-stream; > > name="=?iso-8859-1?Q?p=E4=E4?=" Best regards, Andrew.

1 0

[Dovecot] Dovecot failing to parse some UTF-8 encoded attachment filenames, returning empty string instead
by Andrew Richards 30 Sep '11

30 Sep '11

Hi, I'm seeing a strange problem with some attachment filenames that are UTF-8 encoded. The problem seems to be related to spaces and/or unusual characters in filenames, like accented characters (or perhaps just to filenames if UTF-8 encoded; I've not explored that fully). These filenames are shown as empty strings in IMAP using Dovecot. I've attached a sample message that exhibits this problem, trimmed down to fairly bare essentials. By comparison I find that (for example) Courier happily returns the filename (still encoded). Although I suspect the problem lies within Dovecot, it may be an underlying Unicode or other component that's at the root of the problem. I can replicate this by putting the attached message in a mailbox (I'm using Maildir format mailboxes, so I just drop the raw file in Maildir/new and change the ownership of the file to match the mailbox owner). Then a pretend IMAP session to show the problem, $ telnet localhost 143 Trying ::1... Connected to localhost. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. 0 login some.one(a)test.domain password 0 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS] Logged in 0 select inbox * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 4 EXISTS * 0 RECENT * OK [UNSEEN 1] First unseen. * OK [UIDVALIDITY 1316621730] UIDs valid * OK [UIDNEXT 8] Predicted next UID * OK [HIGHESTMODSEQ 1] Highest 0 OK [READ-WRITE] Select completed. 0 fetch 4 body * 4 FETCH (BODY (("text" "html" ("charset" "iso-8859-15") NIL NIL "base64" 278 5)("application" "octet-stream" ("name" "") NIL NIL "base64" 18) "mixed")) 0 OK Fetch completed. 0 logout * BYE Logging out 0 OK Logout completed. Connection closed by foreign host. $ especially note the ("name" "") part showing a supposedly empty filename. I've observed this behaviour on the following versions of Dovecot, - 1.2.9 on Ubuntu 10.04LTS (pre-compiled version) - 1.2.17 on Fedora 13 (pre-compiled version) - 2.0.15 on Fedora 13 (from source) I don't think the Dovecot configuration is relevant, but I've put it below for good measure for the 2.0.15 setup. Any ideas on what might be causing this? Best regards, Andrew. # dovecot -n # 2.0.15: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.34.9-69.fc13.i686.PAE i686 Fedora release 13 (Goddard) auth_debug = yes default_login_user = nobody log_path = /var/log/dovecot.log passdb { args = /usr/local/bin/checkcdb driver = checkpassword } protocols = imap pop3 service auth { user = root } service imap-login { inet_listener imap { ssl = no } } service pop3-login { inet_listener pop3 { ssl = no } } ssl = no userdb { driver = prefetch }

2 4

[Dovecot] Virtual Folder configuration problem. [FIXED]
by Terry Carmen 29 Sep '11

29 Sep '11

Well, it took a ton of time and research, but I finally have a working Unread virtual mailbox on Dovecot 2.x on Centos 6.0. I have no idea if it's optimal or correct, but it works perfectly and doesn't raise any errors or warnings. Here's what I ended up with: dovecot.conf: Add the following: mail_plugins = $mail_plugins virtual namespace { type = private prefix = virtual. separator = . location = virtual:~/Maildir/virtual } 10-mail.conf: Add the following: # default namespace namespace { separator = . prefix = inbox = yes } 20-imap.conf: Add the following: protocol imap { mail_plugins = $mail_plugins virtual } 15-lda.conf: Add the following: protocol lda { mail_plugins = $mail_plugins virtual } Restart dovecot. Reload your mail client. Dovecot will create ~/Maildir/virtual cd ~/Maildir/virtual mkdir Unread Use your favorite editor and create a file named "dovecot-virtual" contaiing: # ~/Maildir/virtual/unseen/dovecot-virtual INBOX INBOX.* -INBOX.Trash unseen Save the file and restart your mail client. Go to "Subscriptions" in your mail client and subscribe to the Unseen folder. You should now have a virtual folder that contains all your unread mail, except for the contents of the Trash folder. Enjoy! -- Terry Carmen CNY Support, LLC https://www.cnysupport.com

1 0

[Dovecot] Error message
by Knute Johnson 29 Sep '11

29 Sep '11

I'm getting the following message in my log; dovecot: IMAP(knute): fchown(/home/knute/mail/.imap/INBOX/dovecot.index.cache.lock, -1, 8(mail)) failed: Operation not permitted (egid=1000(knute), group based on /var/mail/knute): 1 Time(s) dovecot: IMAP(knute): fchown(/home/knute/mail/.imap/INBOX/dovecot.index.log.newlock, -1, 8(mail)) failed: Operation not permitted (egid=1000(knute), group based on /var/mail/knute): 2 Time(s) dovecot: IMAP(knute): fchown(/home/knute/mail/.imap/INBOX/dovecot.index.tmp, -1, 8(mail)) failed: Operation not permitted (egid=1000(knute), group based on /var/mail/knute): 4 Time(s) I got these once before on the /var/mail/user files and changed the permissions to 600. /home/knute/mail/.imap/INBOX is 770 and the index files are 600. Is this a problem with the directory privilege? Thanks, -- Knute Johnson

1 0

[Dovecot] "Waiting for authentication process to respond" for invalid users with auth_dovecot
by Ibrahim Harrani 29 Sep '11

29 Sep '11

Hi, I am testing dovecot 2.0.13 and 2.0.14 with qmail-ldap and auth_dovecot patch. If i login to dovecot (pop3/imap) with correct user and password. no problem, I can login immediately. but if I try with nonexistant user, dovecot does not immediate answer, wait for a while and says "Waiting for authentication process to respond." auth_dovecot process remains working in the background. How can I avoid this situation? # telnet 0 143 Trying 0.0.0.0... Connected to 0. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN] Dovecot ready. o login validuser validpass o OK [CAPABILITY IMAP4rev1 LITERAL+ SASL o login validuser wrongpass o NO [UNAVAILABLE] Temporary authentication failure. o login non-existant anypass * OK Waiting for authentication process to respond.. Here is output of dovecot -n # OS: Linux 2.6.32-71.el6.x86_64 x86_64 CentOS Linux release 6.0 (Final) auth_debug = yes auth_verbose = yes base_dir = /var/run/dovecot disable_plaintext_auth = no first_valid_gid = 100 last_valid_gid = 65000 last_valid_uid = 65000 listen = * log_path = /var/log/dovecot mail_debug = yes mail_location = maildir:~/Maildir passdb { args =/opt/qmail/smtp/bin/auth_dovecot ./Maildir/ driver = checkpassword } plugin { mechanisms = plain login quota = maildir } protocols = imap pop3 service imap-login { inet_listener imaps { port = 993 ssl = yes } process_min_avail = 1 } service imap-postlogin { executable = script-login /opt/qmail/scripts/dovecotpostlogin.sh } service imap { executable = imap imap-postlogin } service pop3-login { inet_listener pop3s { port = 995 ssl = yes } process_min_avail = 1 } ssl_cert = </etc/ssl/certs/mail.pem ssl_cipher_list = ALL ssl_key = </etc/ssl/private/mail.pem userdb { driver = prefetch } verbose_proctitle = yes verbose_ssl = yes protocol imap { mail_plugins = quota ssl_cert = </etc/ssl/certs/mail.pem ssl_key = </etc/ssl/private/mail.pem } protocol pop3 { mail_plugins = quota ssl_cert = </etc/ssl/certs/mail.pem ssl_key = </etc/ssl/private/mail.pem }

2 2

[Dovecot] outlook 2007 very slow.
by Kui Zhang 29 Sep '11

29 Sep '11

Hello I have a user with 2500+ sub folders. Total mailboxes size is around 6G. (mdbox, dovecot 2:2.0.14) Syncing/Receiving appears to be slow, with outlook 2007. He does not want to switch to an alternative, due to various reasons. I did not find any error logs indicate issues. during idle, imap process appears to loop at adding inotify watches to all folders. I found outlook-idle in wiki, but it is obsolete. doveconf: Warning: Obsolete setting in /etc/dovecot/conf.d/20-imap.conf:55: imap_client_workarounds=outlook-idle is no longer necessary Any one else having similar issue? Anything else I should do to narrow down the issue? Thanks KuiZ

8 16

[Dovecot] Messages not deleted from mbox
by venom00 29 Sep '11

29 Sep '11

Hello, I've two accounts on my mail server, and from my client (Evolution) I've set up two configurations. If I dowload mail one account at a time everything works fine, but if I download both of them at the same time I'm not able to delete downloaded messages, so I download them twice, three times and counting to infinity. On th client side everything looks good: ----------------------------------------------------- LIST +OK 1 messages: 1 485 . UIDL +OK 1 000000704e57eebd . RETR 1 +OK 485 octets Message here... . DELE 1 +OK Marked to be deleted. QUIT +OK Logging out, messages deleted. ----------------------------------------------------- On the server side I've enabled debug logging but nothing relevant comes up, except sometimes an error: Panic: Message unexpectedly expunged from index Full log: http://pastebin.com/raw.php?i=bBizx9tm But most of the times there are no errors and simply the message is not deleted. I'm using mbox format in /var/spool/mail/%u. The dovecot user has read-write access to the folder (even because, as I said, if download an account at once everything works fine). I think it's about locking, I've tried several lock methods but always the same result and I can't see dead locks from lsof, fuser or ls (for dotlocks). Thanks in advance, venom00

1 0

[Dovecot] Dovecot and NTLM problem
by Pavel Obr 28 Sep '11

28 Sep '11

Hallo, i am trying setup dovecot 2.0.9 with NTLM. I tested succesfully winbind with winbind -k, ntlm-auth with ntlm_auth --username=pavel. But I cannot authenticate in Dovecot. My log show these lines: Sep 28 22:16:25 srv-pat dovecot: auth: Debug: auth client connected (pid=6002) Sep 28 22:16:25 srv-pat dovecot: auth: Debug: client in: AUTH#0111#011NTLM#011service=imap#011lip=192.168.7.67#011rip=192.168.100.141#011lport=143#011rport=5109 Sep 28 22:16:25 srv-pat dovecot: auth: Debug: client out: CONT#0111#011 Sep 28 22:16:25 srv-pat dovecot: auth: Fatal: execv(/usr/bin/ntlm_auth) failed: Permission denied Sep 28 22:16:25 srv-pat dovecot: auth: Error: winbind: ntlm_auth exited with exit code 84 Sep 28 22:16:25 srv-pat dovecot: auth: Debug: client in: CONT#0111#011TlRMTVNTUAABAAAAB4IIAAAAAAAAAAAAAAAAAAAAAAA= Sep 28 22:16:25 srv-pat dovecot: auth: Error: winbind(?,192.168.100.141): write(out_pipe) failed: Broken pipe Sep 28 22:16:27 srv-pat dovecot: auth: Debug: client out: FAIL#0111 Do you know what that is mean "Fatal: execv(/usr/bin/ntlm_auth) failed: Permission denied" ? What is exit code 84 - "Error: winbind: ntlm_auth exited with exit code 84"? My dovecot -n: # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-131.12.1.el6.x86_64 x86_64 Scientific Linux release 6.1 (Carbon) auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain ntlm login auth_use_winbind = yes auth_username_format = %n mail_home = /data/vmail/%d/%n mail_location = mdbox:~/mail mbox_write_locks = fcntl passdb { driver = pam } protocols = pop3 imap lmtp ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { args = uid=501 gid=501 home=/data/vmail/%d/%n allow_all_users=yes driver = static } Thank you, Pavel

1 0

[Dovecot] deliver LDA issue with setuid-root
by Daminto Lie 28 Sep '11

28 Sep '11

Hi, I am getting the following error message when trying to implement LDA Dovecot 1.2.9 with virtual users: Sep 28 15:59:33 server1 postfix/pipe[3041]: 28BEC2400A1: to=<msmith(a)example.com>, relay=dovecot, delay=2361, delays=2361/0.01/0/0.03, dsn=4.3.0, status=deferred (temporary failure. Command output: /usr/lib/dovecot/deliver must not be both world-executable and setuid-root. This allows root exploits. See http://wiki.dovecot.org/LDA#multipleuids ) I do not know if I need to change the group to secmail. Currently, I have as follows -rwsr-xr-x 1 root root 933796 2011-06-10 05:36 deliver Can I change it to any other group apart from secmail? and what does it mean by world-executable? Sorry if I ask a silly question here but keen to learn more about linux. Here is my dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap listen: *:143 ssl: no disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login verbose_proctitle: yes first_valid_uid: 106 last_valid_uid: 200 mail_privileged_group: mail mail_location: maildir:/home/vmail/%u/Maildir mbox_write_locks: fcntl dotlock mail_plugins: quota imap_quota imap_client_workarounds: outlook-idle delay-newmail netscape-eoh tb-extra-mailbox-sep lda: postmaster_address: postmaster(a)example.com mail_plugins: quota sendmail_path: /usr/lib/sendmail rejection_reason: Your message to <%t> was automatically rejected:%n%r auth default: mechanisms: plain login username_format: %Lu verbose: yes debug: yes debug_passwords: yes passdb: driver: pam passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: prefetch userdb: driver: passwd userdb: driver: static args: uid=106 gid=1010 home=/home/vmail/%u socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: mail master: path: /var/run/dovecot-auth-master mode: 432 user: vmail group: vmail plugin: quota: maildir quota_rule: *:storage=3GB quota_rule2: Trash:storage=20%% quota_rule3: Spam:storage=10%% quota_warning: storage=95%% /usr/local/bin/quota-warning.sh 95 quota_warning2: storage=80%% /usr/local/bin/quota-warning.sh 80 Here is my master.cf # delivery through dovecot dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${recipient} Any help would be greatly appreciated. Thank you

2 1

[Dovecot] Dsync Removing Subscriptions Entries
by Asai 28 Sep '11

28 Sep '11

Greetings, In learning to get Dsync to work, I see a lot of this type of warning in the logs: dsync-remote(user(a)domain.org): Warning: Subscriptions file /vmail/domain/user/subscriptions: Removing invalid entry: INBOX/SOME folder When I ran a test this morning on the backed up emails on the remote server with Thunderbird, I did indeed see that many of the subscribed folders were not present in TB, although the directories and data were indeed present on the remote server. The subscriptions file on the remote server had the omissions which Dsync warned about. These maildir folders seem to work fine on the main server. Can someone help me to understand how to make the sync without omissions in the subscriptions file? -- *Asai* Global Change Multi-Media Internet Application Development IT and Networking Services 520-398-2542

1 0

[Dovecot] Controling users access ?
by Frank Bonnet 28 Sep '11

28 Sep '11

Hello We are going to split our mailhub in two :-) one for students and one for the others Does Dovecot 2 provide some mechanisms to filter users's' login ? a flat file would be enough for my usage ( I use pam_ldap nss_ldap with nsswitch ) thanks

1 0

[Dovecot] 2.0.14 IPC client_limit reached error
by Tom Pawlowski 28 Sep '11

28 Sep '11

Hi Timo, Upgraded to 2.0.14 last night for the director-related features and I noticed an oddity in the logs: Sep 28 09:53:21 director2 dovecot: master: Warning: service(ipc): client_limit reached, client connections are being dropped Sep 28 09:53:56 director1 dovecot: master: Warning: service(ipc): client_limit reached, client connections are being dropped Sep 28 09:54:23 director2 dovecot: master: Warning: service(ipc): client_limit reached, client connections are being dropped Sep 28 09:55:07 director1 dovecot: master: Warning: service(ipc): client_limit reached, client connections are being dropped Sep 28 09:55:24 director2 dovecot: master: Warning: service(ipc): client_limit reached, client connections are being dropped Sep 28 09:56:08 director1 dovecot: master: Warning: service(ipc): client_limit reached, client connections are being dropped Sep 28 09:56:25 director2 dovecot: master: Warning: service(ipc): client_limit reached, client connections are being dropped Sep 28 09:57:10 director1 dovecot: master: Warning: service(ipc): client_limit reached, client connections are being dropped Sep 28 09:57:26 director2 dovecot: master: Warning: service(ipc): client_limit reached, client connections are being dropped These warnings are only being printed out by the directors. Both the directors and imap/pop3 servers have init scripts with the following ulimits set in the start sections: ulimit -s unlimited ulimit -n 30000 ulimit -u 30000 (We'd get alerts long before resource consumption became an issue) I've been watching the established imap/pop3 connection count on both directors for the past hour and a half and despite these warnings, those counts have grown continuously. The other weird thing is, according the configuration (attached), the ipc service has a client_limit of 0 by default, so we shouldn't be hitting a ceiling anyway, correct? So are these false warnings or something to be concerned about? -- Tom Pawlowski OIT-CSS System Administrator office: Hill 147 email: tompru(a)jla.rutgers.edu phone: (732) 445-2634

1 0

[Dovecot] Problems running Dovecot 1.2.17 on AIX
by ra＠rz.uni-frankfurt.de 28 Sep '11

28 Sep '11

Hello, we have a problem getting Dovecot 1.2.17 to work on one of our AIX-Machines (AIX 5.3). Dovecot compiles fine, but if we try to run it we get strange library dependency problems such as the following: [root@localhost dovecot-test]# /local/dovecot-test/sbin/dovecot -F -c /local/dovecot-test/etc/dovecot.clients.conf Edlopen(/local/dovecot-test/lib/dovecot/imap/lib01_acl_plugin.so) failed: rtld: 0712-001 Symbol bsearch_strcmp was referenced from module /local/dovecot-test/lib/dovecot/imap/lib01_acl_plugin.so(), but a runtime definition of the symbol was not found. rtld: 0712-001 Symbol safe_mkstemp_group was referenced from module /local/dovecot-test/lib/dovecot/imap/lib01_acl_plugin.so(), but a runtime definition of the symbol was not found. rtld: 0712-001 Symbol mail_user_module_register was referenced from module /local/dovecot-test/lib/dovecot/imap/lib01_acl_plugin.so(), but a runtime definition of the symbol was not found. rtld: 0712-001 Symbol dict_iterate_init was referenced from module /local/dovecot-test/lib/dovecot/imap/lib01_acl_plugin.so(), but a runtime definition of the symbol was not found. rtld: 0712-001 Symbol dict_iterate was referenced from module /local/dovecot-test/lib/dovecot/imap/lib01_acl_plugin.so(), but a runtime definition of the symbol was not found. rtld: 0712-001 Symbol dict_iterate_deinit was referenced from module /local/dovecot-test/lib/dovecot/imap/lib01_acl_plugin.so(), but a runtime definition of the symbol was not found. rtld: 0712-001 Symbol i_strcmp_p was referenced from module /local/dovecot-test/lib/dovecot/imap/lib01_acl_plugin.so(), but a runtime definition of the symbol was not found. Additional errors occurred but are not reported. FCouldn't load required plugins We tried to use the compiler-script as described on the wiki (http://wiki1.dovecot.org/AixPluginsSupport) and we tried to compile dovecot with gcc instead of xlc. We even tried it on another host running AIX 5.3 but dovecot still fails with the runtime linker complaining about missing runtime definitions. Any hint/help would be appreciated. Thanks in advance Manuel

1 0

[Dovecot] Virtual Folder configuration problem.
by Terry Carmen 28 Sep '11

28 Sep '11

I'm attempting to create a virtual inbox that contains all unread messages from the user's Maildir. I created a conf file called 80-virtual.conf containing: mail_plugins = $mail_plugins virtual namespace { prefix = virtual/ separator = / location = virtual:~/Maildir/virtual } And created the /home/username/Maildir/virtual/unseen/dovecot-virtual file which contains: # ~/Maildir/virtual/unseen/dovecot-virtual * unseen However it doesn't work and the maillog file contains: dovecot: imap(username): Error: user username: Initialization failed: namespace configuration error: inbox=yes namespace missing This is with dovecot 2.0.beta6 (3156315704ef) Does anybody have any suggestions? Thanks! Terry

3 4

[Dovecot] Duplicates when switching from Qpopper to Dovecot pop3
by Tristan Goguen 28 Sep '11

28 Sep '11

Hi All, Our test users re-download the mail they've left on the server when they switch from Qpopper to Dovecot. Qpopper includes the X-UIDL header - X-UIDL: X8V"!E)<"!58?"!"9C"! - on read messages. Any suggestions are appreciated. I've included my dovecot configuration. Thank you, Tristan --- Tristan Tristan Goguen CEO, ILAP® T: 416-250-5600 ext. 205 F: 416-250-6755 tgoguen(a)ilap.com www.ilap.com --- # 2.0.14: /etc/dovecot.conf # OS: SunOS 5.10 sun4v auth_cache_size = 1048575 B auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.+-_@ auth_username_format = %Ln auth_verbose = yes base_dir = /usr/local/var/run/dovecot/ disable_plaintext_auth = no first_valid_uid = 100 log_path = /var/log/dovecot.log login_greeting = mail_access_groups = mail mail_fsync = never mail_location = mbox:~/mail:INBOX=/var/mail/%1u/%1.1u/%u mbox_dotlock_change_timeout = 1 mins mbox_min_index_size = 1 B mbox_read_locks = dotlock mbox_write_locks = dotlock mmap_disable = yes passdb { driver = shadow } protocols = pop3 service pop3-login { client_limit = 10 inet_listener pop3 { address = 216.223.136.7 port = 110 } process_limit = 128 process_min_avail = 5 service_count = 0 vsz_limit = 512 M } shutdown_clients = no ssl = no userdb { args = blocking=yes driver = passwd } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_enable_last = yes pop3_lock_session = yes pop3_reuse_xuidl = yes pop3_save_uidl = yes }

1 1

[Dovecot] Create userdir on dovecot login --- solved
by Andreas Cieslak 27 Sep '11

27 Sep '11

Sorted out the problem, which was already solved in an older forum post of dovecot. In the file /usr/local/etc/dovecot/conf.d/auth-system.conf.ext I set Passdb { Driver = pam args = session=yes dovecot } Unfortunately this didnt work because when I log in with a user xy, the user dovecot became the owner of the userdir. When I modified the file /usr/local/etc/dovecot/conf.d/auth-system.conf.ext like this: Passdb { Driver = pam # args = session=yes dovecot } And gave anyone (for testing) the permission to write to home. That worked! At least put the ldap-users in a group and gave that group writing permissions to home. Finished! -----Ursprüngliche Nachricht----- Von: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] Im Auftrag von Andreas Cieslak Gesendet: Donnerstag, 22. September 2011 15:41 An: dovecot(a)dovecot.org Betreff: [Dovecot] Create userdir on dovecot login Hi List, I am trying to set up automated userdir-creation on login via squirrelmail or email-client with a dovecot backend. The users are first imported on an openldap directory on the same server as the dovecot runs on. Authentication on the dovecot mail system via pam_ldap works properly. Tried already to integrate some advices from the dovecot wiki like Passdb { Driver = pam args = session=yes dovecot } But the homedir creation works only when the user logs onto the machine. When I try to log in via Squirrel on the dovecot no homedir is created and there is following message in the logs: auth: Error: pam(cieslak,193.175.157.121): pam_open_session() failed: Permission denied I think its something about the user rights, but dont really know where to search for the needle Here is the config of my environment root@server:/home# dovecot -n # 2.0.13: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686 i686 Debian 6.0.2 auth_debug = yes auth_mechanisms = login plain auth_verbose = yes first_valid_uid = 1000 hostname = server info_log_path = /var/log/dovecot-info last_valid_uid = 10000 listen = * log_path = /var/log/dovecot mail_access_groups = mail mail_debug = yes mail_full_filesystem_access = yes mail_location = maildir:~/Maildir mbox_write_locks = fcntl passdb { args = session=yes dovecot driver = pam } postmaster_address = mailaddress service auth-worker { group = shadow user = $default_internal_user } service auth { user = $default_internal_user } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_min_avail = 0 service_count = 0 vsz_limit = 256 M } service lmtp { unix_listener lmtp { mode = 0666 } } service pop3-login { inet_listener pop3s { port = 995 ssl = yes } } ssl_ca = </usr/local/etc/dovecot/ca ssl_cert = </usr/local/etc/dovecot/crt ssl_key = </usr/local/etc/dovecot/key userdb { driver = passwd } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } dovecot --version 2.0.13 The configuration of the pam module /etc/pam.d/dovecot looks like @include common-auth @include common-account @include common-session The common session has the line session required pam_mkhomedir.so skel=/etc/skel umask=0077 I would appreciate any hints. Andreas

1 0

[Dovecot] deliver agent and index/control files
by Nerijus Kislauskas 27 Sep '11

27 Sep '11

Hi Timo and others, We use Dovecot in Kaunas University of Technology in Lithuania. For now our LDA is Postfix and POP/IMAP server is Dovecot. We would like to implement dovecot deliver as LDA. Everything is ok exept one small thing: deliver is creating dovecot.index.log in wrong place In dovecot config files we have: ... mail_location = maildir:/var/mail/%Ln:INDEX=/var/indexes/%Ln:CONTROL=/var/indexes/%Ln ... As you can see, mail and index/control files are in different partitions. and deliver log: deliver(nerijus.kislauskas(a)ktu.lt): maildir: data=/var/mail/nerkisl deliver(nerijus.kislauskas(a)ktu.lt): maildir++: root=/var/mail/nerkisl, index=, control=, inbox=/var/mail/nerkisl That is why dovecot.index.log is created in /var/mail/nerkisl, and not in /var/indexes/nerkisl. How can we fix this? -- Sincerely, Nerijus Kislauskas KTU ITPI, LitNET NOC Studentu g. 48a - 101, Kaunas tel.: (8~37) 30 06 45 mob. tel.: 8-614-93889 e-mail.: nerijus.kislauskas(a)ktu.lt

1 1

[Dovecot] Subscription File
by Carlos Mennens 26 Sep '11

26 Sep '11

I had a use lose 20 folders on their mail account. I was able to pull them back from a restore and dumped them all back on the server in her Maildir. The problem is she doesn't see them on her Thunderbird or Outlook client. I checked to make sure I put them back into the correct directory and I did as well as verify permissions aren't weird. I then noticed a file called 'subscriptions' in her Maildir directory. She appears to only be seeing folders that are listed in this 'subscriptions' file. My question is how do I update this file? If I delete it, will Dovecot re-generate the file with the correct subscription entries? I don't understand what to do but I'm hoping I don't have to edit the file by hand...that seems way too cumbersome.

3 6

[Dovecot] how to disable quota for second namespace?
by Udo Lembke 26 Sep '11

26 Sep '11

Hi all, I have a second namespace as archive, where no quota should be active (work with type = shared). But if I change the type to private the quota will allways count. My dovecot version is the 2.0.13. I have tried things like this: plugin { quota_rule = *:storage=500M quota_rule2 = Trash:storage=+100M quota_rule3 = Sent:storage=+50M quota_rule4 = ns=archiv/%u/:ignore } It's also doesn't work with "quota_rule4 = archiv/%u/:ignore" The namespace: namespace { type = private separator = / prefix = "archiv/%u/" location = maildir:/var/data/archiv/%d/%n:INDEX=/var/data/indexes/archiv/%u:LAYOUT=fs inbox = no hidden = no subscriptions = no list = yes } Even if I define the namespace for quota I see the quota-value also in the "root": plugin { quota = maildir:User quota quota2 = maildir:Archiv quota:ns=archiv/%u/ } doveadm quota get -u test(a)example.com Quota name Type Value Limit % User quota STORAGE 1587135 512000 309 User quota MESSAGE 13346 - 0 Archiv quota STORAGE 1359379 - 0 Archiv quota MESSAGE 10577 - 0 du -ks /var/data/mail/example.com/test 234364 /var/data/mail/example.com/test du -ks /var/data/archiv/example.com/test 1383792 /var/data/archiv/example.com/test Now is the big question, how can I reach such an output? doveadm quota get -u test(a)example.com Quota name Type Value Limit % User quota STORAGE 227756 512000 44 User quota MESSAGE 2769 - 0 Archiv quota STORAGE 1359379 - 0 Archiv quota MESSAGE 10577 - 0 I can't believe that's only possible with a shared namespace, or? Any hints are welcome. Best regards Udo

1 1

[Dovecot] "doveadm log reopen" don't reopen seperate lmtp log
by Henrik Larsson 25 Sep '11

25 Sep '11

Dear all I have setup separate pop3/imap log "/var/log/dovecot" and lmtp delivery log "/var/log/dovecot-deliver". After rotating logfiles, i run "doveadm log reopen". I see that my pop3/imap log "/var/log/dovecot" is used straight away, but my lmpt log "/var/log/dovecot-deliver" isn't used at first. After some time, usually a few minutes, logs are being written to this file anyway. But if I compare this to my maillog, it misses some deliveries just after the log rotation. Is there any problems with this configuration that should be corrected? --cut-- # doveconf -n # 2.0.15: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.2-STABLE amd64 auth_mechanisms = plain login digest-md5 cram-md5 first_valid_uid = 125 hostname = mail.larsson.it listen = * log_path = /var/log/dovecot mail_plugins = fts fts_squat zlib mail_privileged_group = postfix mail_temp_dir = /var/db/dovecot managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { inbox = yes location = prefix = separator = . type = private } namespace { hidden = yes inbox = no list = no location = prefix = INBOX. separator = . type = private } passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { fts = squat fts_squat = partial=4 full=10 sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap pop3 lmtp sieve service auth-worker { user = $default_internal_user } service auth { unix_listener /home/mail/postfix/private/auth { group = postfix mode = 0666 user = postfix } } service lmtp { executable = lmtp -L unix_listener /home/mail/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } ssl_cert = </etc/ssl/mail-chained.crt ssl_key = </etc/ssl/mail.key userdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lmtp { log_path = /var/log/dovecot-deliver mail_plugins = fts fts_squat zlib sieve } protocol lda { mail_plugins = fts fts_squat zlib sieve } protocol imap { mail_plugins = fts fts_squat zlib imap_zlib } --cut-- Best regards Henrik Larsson

1 0

[Dovecot] dsync doubts
by Piotr NetExpert 24 Sep '11

24 Sep '11

Hi everyone, I want to backup mailboxes to another server. A usage information for dsync says "... <remote dsync command>". Does it mean I need dsync installed on the other server too? Now when I try to run dsync I receive: # dsync -v -D -u abc backup ssh user(a)other.server dsync(username): Debug: Effective uid=123, gid=123, home=/path/abc dsync(username): Debug: maildir++: root=/path/abc, index=, control=, inbox=/path/abc dsync-local(abc): Debug: Namespace : Using permissions from /path/abc: mode=0700 gid=-1 Password: server: not found dsync-local(abc): Error: read() from worker server failed: EOF What could be wrong? How can I check what it wants to do and cannot? I cannot find more information I need in a wiki page of dsync. -- pozdrawiam Piotr Szafarczyk http://www.netexpert.pl

3 3

[Dovecot] tiny doc bug report
by Jeff Rogers 23 Sep '11

23 Sep '11

First timer, I'm installing dovecot-2.0.15. I ran configure; make; sudo make install The INSTALL file then says: --- Rename configuration file: mv /usr/local/etc/dovecot-example.conf /usr/local/etc/dovecot.conf Read through, and make needed modifications. --- The example configuration file is not installed in that location. Presumably it is now installed as /usr/local/share/doc/dovecot/example-config/dovecot.conf Unless this path difference is a quirk of my local system, the INSTALL directions should be fixed to avoid confusion. Thanks, -J

1 0

[Dovecot] Using Dsync for Incremental Sync
by Asai 23 Sep '11

23 Sep '11

Greetings, We have about 26 GB of email which we're trying to sync nightly to a remote server, but what I just read from a post from Timo awhile back is that it's not possible because dsync relies on message GUIDs which aren't available in the IMAP protocol. It seems that this is still the case, is there anything on the horizon for this to change? -- *Asai* Global Change Multi-Media Internet Application Development IT and Networking Services 520-398-2542

2 3

[Dovecot] How to port this dovecot-1.x configuration file to dovecot-2.x
by forumer＠smartmobili.com 23 Sep '11

23 Sep '11

Hi, I am trying to move from dovecot-1.x to dovecot 2.1 but I have this error : Sep 23 16:04:13 lda: Error: userdb lookup: connect(/var/run/dovecot/auth-master) failed: Permission denied (euid=5000(vmail) egid=5000(vmail) missing +r perm: /var/run/dovecot/auth-master, dir owned by 0:0 mode=0755) and I dont' manage to find information about how to translate this old configuration part: socket listen { master { # Master socket provides access to userdb information. It's typically # used to give Dovecot's local delivery agent access to userdb so it # can find mailbox locations. path = /var/run/dovecot/auth-master mode = 0600 # Default user/group is the one who started dovecot-auth (root) user = vmail #group = } client { # The client socket is generally safe to export to everyone. Typical use # is to export it to your SMTP server so it can do SMTP AUTH lookups # using it. path = /var/run/dovecot/auth-client mode = 0660 } Thanks

2 1

[Dovecot] (2.1 recent:) fts_decoder
by Lutz Preßler 23 Sep '11

23 Sep '11

Hello again, test setup as in previous messages. With fts = lucene, I enabled the adapted decode2text.sh (at least I tried...) as suggested in the comment section. On dovecot-start /var/run/dovecot/decode2text socket is created with sufficiant permissions (rw for anybody), but decode2text.sh is not started (it's rx for anybody). When creating lucene indexes, I cannot see it executed either (and no attachment-only content is findable afterwards). No errors with mail_debug - if I change fts_decoder to a nonexistant value, that's logged. Lutz

2 1

[Dovecot] 64.31.19.48 attempt to break into my computer
by Rick Baartman 23 Sep '11

23 Sep '11

>From my secure log: Sep 19 01:16:44 lin12 dovecot-auth: pam_unix(dovecot:auth): check pass; user unknown Sep 19 01:16:44 lin12 dovecot-auth: pam_unix(dovecot:auth): authentication failure; logname= uid=0 euid=0 tty=dovecot ruser= rhost=::ffff:64.31.19.48 Sep 19 01:16:44 lin12 dovecot-auth: pam_succeed_if(dovecot:auth): error retrieving information about user aaron Sep 19 01:16:45 lin12 dovecot-auth: pam_unix(dovecot:auth): check pass; user unknown Sep 19 01:16:45 lin12 dovecot-auth: pam_unix(dovecot:auth): authentication failure; logname= uid=0 euid=0 tty=dovecot ruser= rhost=::ffff:64.31.19.48 Sep 19 01:16:45 lin12 dovecot-auth: pam_succeed_if(dovecot:auth): error retrieving information about user abby etc. Literally, 30,000 user names attempted. -- rick baartman TRIUMF 4004 Wesbrook Mall Vancouver, BC V6T2A3

10 17

Re: [Dovecot] 64.31.19.48 attempt to break into my computer
by Alex 23 Sep '11

23 Sep '11

It is a great tool. Unfortunately dovecot allows infinate incorrect logins during a single session. When fail2ban has firewalled the ip its pointless as the rule only affects new sessions, not established ones. I am disappointed that the author of dovecot has no interest in adding a feature that closes the session after x auth failures. It would certainly make tools like fail2ban more effective. ----- Reply message ----- From: "John Alexander" <john.alexander(a)preachain.org> Date: Fri, Sep 23, 2011 00:13 Subject: [Dovecot] 64.31.19.48 attempt to break into my computer To: <dovecot(a)dovecot.org> Fail2Ban is an excellent tool to deal with this sort of thing. On Mon, 19 Sep 2011 10:05:47 -0700, Rick Baartman wrote > >From my secure log: > > Sep 19 01:16:44 lin12 dovecot-auth: pam_unix(dovecot:auth): check > pass; user unknown > Sep 19 01:16:44 lin12 dovecot-auth: pam_unix(dovecot:auth): > authentication failure; logname= uid=0 euid=0 tty=dovecot ruser= > rhost=::ffff:64.31.19.48 > Sep 19 01:16:44 lin12 dovecot-auth: pam_succeed_if(dovecot:auth): > error retrieving information about user aaron

3 2

[Dovecot] Dovecot 1.x vs 2.x
by Lee Standen 22 Sep '11

22 Sep '11

Hi All, I'm currently in the planning stages for a technology refresh for a very large mail installation, and looking at using Dovecot with LDA/Sieve/FTS_Solr and a number of other plugins to give our users some great features. Currently, our standard distribution is Ubuntu Lucid, which has Dovecot 1.x included with it in pre-built packages, and Dovecot 2.x is in the upcoming Oneiric beta coming out next month. My question is, are there any compelling reasons why we should gravitate towards running Dovecot 2.x beyond the fact it's the "latest and greatest" version? What features would we miss that we're likely to want or need on a very large installation (i'm talking dozens of VM's, over 1 million mailboxes). Thanks

1 0

[Dovecot] Dovecot 1.2, problem with SQL quota and mail aliases
by Jacek Osiecki 22 Sep '11

22 Sep '11

Hello, I have a small server running dovecot 1.2 (still not balsy enough to switch to 2.0 - virtual sql accounts, managesieve etc.). There are no local users - only ones defined in the SQL database, and everything else (including quota) is defined in SQL db too. Dovecot is used as IMAP daemon, and dovecot-lda is responsible for delivery (in order to make use of sieve and managesieve). I know that my configuration might be a bit ancient, but this is not referring to any bug (at least I think so) and rather to errors I've made in configuration. Several users have reported, that they are running out of quota even though their mailboxes are empty. I thought these were some single cases, but recently I discovered that this situation occurs when: - user john(a)domain.com has a mail alias, eg. john.smith(a)domain.com - he logs in to the imap account (using MUA or webmail) using his alias (john.smith(a)domain.com) In effect, all incoming emails for john(a)domain.com are increasing the counters (both "bytes" and "messages"), but since user logs in using john.smith(a)domain.com - anything he deletes from the mailbox decreases the records for john.smith(a)domain.com. Finally, John has two records: +---------------------------+-----------+----------+ | username | bytes | messages | +---------------------------+-----------+----------+ | john.smith(a)domain.com | -5488133 | -13 | | john(a)domain.com | 341411029 | 1111 | +---------------------------+-----------+----------+ The record for john(a)domain.com finaly reaches the quota limit - and even removing all emails does not help. My /etc/dovecot/dovecot-dict-quota.conf looks like this: map { pattern = priv/quota/storage table = quota username_field = username value_field = bytes } map { pattern = priv/quota/messages table = quota username_field = username value_field = messages } And my question is: what is used as "username"? Always the username given wher user logs in? Is there a way to provide some dictionary to translate all aliases to the real username? Best regards, -- Jacek Osiecki joshua(a)ceti.pl GG:3828944 I don't want something I need. I want something I want.

3 4

[Dovecot] Shared Namespace
by Tom Clark 22 Sep '11

22 Sep '11

Is there anyway of limiting a shared namespace to a domain? E.g. mailbox.com and mailbox2.com are setup with vpopmail. We've got a shared namespace but only want the ability on mailbox.com. Thanks, Tom

2 4

[Dovecot] Trouble getting lda to gzip incomming mails (zlib plugin)
by Helge Milde 22 Sep '11

22 Sep '11

Hi! I've followed the guide at http://wiki2.dovecot.org/Plugins/Zlib to try to make Dovecot gzip incomming mails, but it doesn't seem to work. I've made pop/imap read gzipped files, and this seems to work perfectly, but LDA is still saving incomming mails in plain text. There's not too much information out there regarding the zlib module, so I'm not sure where to start debugging the problem, and was hoping someone could point me in the right direction. The only mention of zlib when LDA is delivering a file: Sep 20 15:51:19 mail dovecot: deliver(helgemil): Module loaded: /usr/lib/dovecot/modules/lda/lib20_zlib_plugin.so The most relevant lines from dovecot.conf: mail_debug = yes protocols = imap pop3 imaps pop3s mail_location = maildir:~/Maildir mail_privileged_group = mail max_mail_processes = 1024 mail_process_size = 512 protocol imap { mail_max_userip_connections = 50 mail_plugins = fts fts_squat zlib } protocol pop3 { pop3_uidl_format = %08Xu%08Xv mail_max_userip_connections = 50 mail_plugins = zlib } protocol lda { postmaster_address = postmaster(a)monsternett.no mail_plugins = sieve zlib mail_plugin_dir = /usr/lib/dovecot/modules/lda sieve_global_dir = /etc/dovecot/sieve/ sieve_global_path = /etc/dovecot/sieve/default.sieve } plugin { zlib_save_level = 6 zlib_save = gz fts = squat sieve = ~/dovecot.sieve sieve_dir = ~/ } -- Helge Milde, 69701808 www.monsternett.no

3 5

[Dovecot] Create userdir on dovecot login
by Andreas Cieslak 22 Sep '11

22 Sep '11

Hi List, I am trying to set up automated userdir-creation on login via squirrelmail or email-client with a dovecot backend. The users are first imported on an openldap directory on the same server as the dovecot runs on. Authentication on the dovecot mail system via pam_ldap works properly. Tried already to integrate some advices from the dovecot wiki like Passdb { Driver = pam args = session=yes dovecot } But the homedir creation works only when the user logs onto the machine. When I try to log in via Squirrel on the dovecot no homedir is created and there is following message in the logs: auth: Error: pam(cieslak,193.175.157.121): pam_open_session() failed: Permission denied I think its something about the user rights, but dont really know where to search for the needle Here is the config of my environment root@server:/home# dovecot -n # 2.0.13: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686 i686 Debian 6.0.2 auth_debug = yes auth_mechanisms = login plain auth_verbose = yes first_valid_uid = 1000 hostname = server info_log_path = /var/log/dovecot-info last_valid_uid = 10000 listen = * log_path = /var/log/dovecot mail_access_groups = mail mail_debug = yes mail_full_filesystem_access = yes mail_location = maildir:~/Maildir mbox_write_locks = fcntl passdb { args = session=yes dovecot driver = pam } postmaster_address = mailaddress service auth-worker { group = shadow user = $default_internal_user } service auth { user = $default_internal_user } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_min_avail = 0 service_count = 0 vsz_limit = 256 M } service lmtp { unix_listener lmtp { mode = 0666 } } service pop3-login { inet_listener pop3s { port = 995 ssl = yes } } ssl_ca = </usr/local/etc/dovecot/ca ssl_cert = </usr/local/etc/dovecot/crt ssl_key = </usr/local/etc/dovecot/key userdb { driver = passwd } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } dovecot --version 2.0.13 The configuration of the pam module /etc/pam.d/dovecot looks like @include common-auth @include common-account @include common-session The common-session has the line session required pam_mkhomedir.so skel=/etc/skel umask=0077 I would appreciate any hints. Andreas

1 0

Re: [Dovecot] IMAP delete logs
by James isolder 22 Sep '11

22 Sep '11

Since enabling the mail_plugins = mail_log. I now get an error. Is there anything else I need to check adn how I can put the dovecot into debug mode so I can get more info about where it is failing. dovecot not running? (check /var/run/dovecot//master.pid). Starting dovecot. Error: imap dump-capability process returned 1 Fkevent(EV_ADD, 0) failed: Operation not supported by device Fatal: Invalid configuration in /usr/local/etc/dovecot.conf # 1.2.17: /usr/local/etc/dovecot.conf # OS: FreeBSD 7.0-RELEASE i386 base_dir: /var/run/dovecot/ protocols: imap pop3 listen(default): *:1143 listen(imap): *:1143 listen(pop3): *:1110 ssl: no disable_plaintext_auth: no login_dir: /var/run/dovecot//login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_log_format_elements: pid=%p rsock=%r:%b lsock=%l:%a proto=%s user=%u auth_method=%m secure=%c login_log_format: role=proxy realm=test %$: %s login_process_per_connection: no login_processes_count: 50 login_max_processes_count: 5120 login_max_connections: 512 max_mail_processes: 6144 mail_max_userip_connections(imap): 8 mail_max_userip_connections(pop3): 10 verbose_proctitle: yes first_valid_uid: 1000 first_valid_gid: 1000 mail_privileged_group: mail mail_location: mbox:~/mail/:INBOX=/var/mail/%u mail_debug: yes maildir_copy_preserve_filename: yes mail_executable(default): /usr/local/libexec/dovecot/rawlog /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/rawlog /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/rawlog /usr/local/libexec/dovecot/pop3 mail_plugins(default): mail_log mail_plugins(imap): mail_log mail_plugins(pop3): mail_plugin_dir: /usr/local/lib/dovecot/pop3 mail_log_max_lines_per_sec: 0 pop3_enable_last(default): yes pop3_enable_last(imap): yes pop3_enable_last(pop3): no pop3_client_workarounds(default): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(imap): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(pop3): auth default: mechanisms: plain login cache_ttl: 0 cache_negative_ttl: 0 worker_max_count: 60 process_size: 512 passdb: driver: sql args: /usr/local/etc/dovecot-proxy.sql socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 master: path: /var/run/dovecot/auth-master mode: 384 plugin: mail_log_events: delete undelete expunge copy mailbox_delete mailbox_rename On Wed, 14 Sep 2011 14:40:21 +0200 "mailing(a)securitylabs.it" <mailing(a)securitylabs.it> wrote > Il 14/09/2011 07:48, James isolder ha scritto: > > Version - 1.2.17 > > > > Is there a way to include message or folder deletion logs in the dovecot > > log > > files. > > > > > > Yes, you can use the mail logger plugin: > > http://wiki.dovecot.org/Plugins/MailLog ____________________________________________________________ South Africas premier free email service - www.webmail.co.za For super low premiums, click here. http://www.dialdirect.co.za/?vdn=15828

2 1

[Dovecot] Create userdir on dovecot login
by Andreas Cieslak 22 Sep '11

22 Sep '11

Hi List, I am trying to set up automated userdir-creation on login via squirrelmail or email-client with a dovecot backend. The users are first imported on an openldap directory on the same server as the dovecot runs on. Authentication on the dovecot mail system via pam_ldap works properly. Tried already to integrate some advices from the dovecot wiki like Passdb { Driver = pam args = session=yes dovecot } But the homedir creation works only when the user logs onto the machine. When I try to log in via Squirrel on the dovecot no homedir is created and there is following message in the logs: auth: Error: pam(cieslak,193.175.157.121): pam_open_session() failed: Permission denied I think its something about the user rights, but dont really know where to search for the needle Here is the config of my environment root@server:/home# dovecot -n # 2.0.13: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686 i686 Debian 6.0.2 auth_debug = yes auth_mechanisms = login plain auth_verbose = yes first_valid_uid = 1000 hostname = server info_log_path = /var/log/dovecot-info last_valid_uid = 10000 listen = * log_path = /var/log/dovecot mail_access_groups = mail mail_debug = yes mail_full_filesystem_access = yes mail_location = maildir:~/Maildir mbox_write_locks = fcntl passdb { args = session=yes dovecot driver = pam } postmaster_address = mailaddress service auth-worker { group = shadow user = $default_internal_user } service auth { user = $default_internal_user } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_min_avail = 0 service_count = 0 vsz_limit = 256 M } service lmtp { unix_listener lmtp { mode = 0666 } } service pop3-login { inet_listener pop3s { port = 995 ssl = yes } } ssl_ca = </usr/local/etc/dovecot/ca ssl_cert = </usr/local/etc/dovecot/crt ssl_key = </usr/local/etc/dovecot/key userdb { driver = passwd } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } dovecot --version 2.0.13 The configuration of the pam module /etc/pam.d/dovecot looks like @include common-auth @include common-account @include common-session The common session has the line session required pam_mkhomedir.so skel=/etc/skel umask=0077 I would appreciate any hints. Andreas

1 0

[Dovecot] Webmail architecture : questions about cache and storage backend
by forumer＠smartmobili.com 22 Sep '11

22 Sep '11

Hi, I have some questions about dovecot-2.1 and need some advice about software architecture. My company plans to develop a kind of Document Managing System (DMS) and one of its module is a webmail that is currently in a pre-alpha stage (if you are curious you can have a look here http://kairos.smartmobili.com/ but don't be surprised if it doesn't work and please do not use IE for now). From my personal analysis that I am sure is incomplete we have the following options to handle emails storage and cache: 1) Do not use a cache and rely on dovecot performance to retrieve email's header in real time. Actually don't know if it's that simple because we might need to have a transformed version of emails to be able to display them more easily in the webmail. In this case this option is not really possible. 2) Use new dovecot-2.1 imap backend and develop a kind of dummy imap server listening to a custom port and storing emails inside a mongoDB database. Advantage is it allow replication very easily. 3) Wait for dovecot2.x to implement a NoSQL storage. Will it happen soon ? If you have other suggestions or ideas I would be happy to hear them. Vincent R.

2 1

[Dovecot] Restoring mail
by Knute Johnson 22 Sep '11

22 Sep '11

I solved it myself, I forgot about the folders in the /home/user/mail directory. So kindly disregard my panicky message from before. -- Knute Johnson

1 0

[Dovecot] Help restoring imap mail
by Knute Johnson 22 Sep '11

22 Sep '11

My mailserver blew up today with a power hit. I've created a new server and have dovecot running and I want to restore my mail. I have a copy of the file that was in /var/mail. I set the new dovecot config up the same as the old one and copied the mail file over. I can see the INBOX mail but none of the rest of it. I'm running 1.2.15 under Ubuntu server 11.04. I'm using Thunderbird as my client running on XP. Any help would be greatly appreciated. Thanks, -- Knute Johnson

1 0

[Dovecot] global ACL inheritances
by Kui Zhang 22 Sep '11

22 Sep '11

Hello I am trying to prevent people from actively delete lazy expunged messages. ACL in following file does not appears to apply to existing or new mailboxes. dovecot/acls/.EXPUNGED/.DEFAULT owner lripk Am I missing something, or is it due to ACL inheritances support? mail_plugins = acl plugin { ... acl = vfile:/etc/dovecot/acls ... } Thank KuiZ

1 0

[Dovecot] Sieve: Vacation, handle and variable
by René Neumann 21 Sep '11

21 Sep '11

Hi *, I am adding a generic way for vacation-replies in my sieve setup. There I set the handle and the reason using variables (see end of mail). My simple question now is: Though variable expansion is not done for subject and reason, is it done for the handle? Because else there seems no way in configuring the vacation action via variables. I tried to read the code for this extension, but ... well ... the whole sieve implementation is way more complicated then I figured ^^. Thus I take the question to the list. Thanks, René ----- default.sieve ----- require [..., "include", "variables"]; # set this to the text you want to get included in the vacation-mail global ["vacation", "vhandle"]; set "vhandle" ""; set "vacation" ""; [...] include :personal "vacation"; ----- vacation.sieve ----- require ["variables", "include", "vacation"]; # this is set in the including script global ["vacation", "vhandle"]; if string :is "${vacation}" "" { return; } # ensure we have a handle if string :is "${vhandle}" "" { set "vhandle" "${vacation}"; } if header :matches "subject" "*" { set "sbj" "Out of office [was: ${1}]"; vacation :addresses [...] :from "..." :days 7 :handle "${vhandle}" :subject "${sbj}" "${vacation}"; } -------------------------

2 4

[Dovecot] About using Dovecot indexes with Thunderbird/kmail
by Anton Aylward 21 Sep '11

21 Sep '11

I have Dovecot running well on my Mandriva mail hub, handing out IMAP to the household LAN. This is 1.2.15. Eventually I'll upgrade the OS and get 2.x, but this is working fine. So this question is really about the mail readers I use and how they make use of Dovecot. I have Thunderbird on my laptop and KMail2 on my desktop. Dovecot indexes. GOOD! The trouble is that the mail readers want their own indexes :-( I wish that Thunderbird would NOT index mail on my laptop, but it does. I wish Kmail2 would not use nepomuk/akonadi to index the mail but it does. Why can't they both believe the indexes used by Dovecot? Is this an unreasonable request? -- "We stand behind all of our products, except for the manure spreader." -- Corporate motto of an equipment manufacturer

3 6

[Dovecot] Login problem via webmail and outlook
by Ankit Gupta 21 Sep '11

21 Sep '11

Hi Mentors, Please help, our users are not able to login into their mailbox account using either outlook or webmail. Please find logs from /var/log/maillog Jan 17 10:45:40 elct dovecot: imap-login: Aborted login: user=<ismail>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Jan 17 10:49:17 elct dovecot: imap-login: Aborted login: user=<ismail>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Jan 17 11:02:57 elct dovecot: imap-login: Aborted login: user=<ismail>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Jan 17 11:03:03 elct dovecot: imap-login: Aborted login: user=<ismail>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Jan 17 11:10:08 elct dovecot: imap-login: Aborted login: user=<ismail>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Jan 17 11:10:14 elct dovecot: imap-login: Aborted login: user=<ismail>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Please help it is urgent. -- Regards Ankit Gupta, Tel: | M: +91 - 9650594790

2 1

[Dovecot] dovecot-virtual folder configuration
by Pierre 21 Sep '11

21 Sep '11

Hi all, Long story short, I'd like to configure a folder containing: INBOX (some other folders) -> unseen emails from these folders + all other emails (also seen) from the same thread -> seen emails from these folders, but only the recent ones + all other emails from the same thread I tried: # inthread refs (or (or recent unseen) recent ) inthread refs unseen # inthread refs (or unseen ( recent seen) ) # inthread refs recent unseen # inthread refs unseen #inthread refs recent (or unseen ) # inthread refs (recent seen (or unseen )) # (inthread refs (or unseen) recent seen) #( inthread refs (or (or recent unseen) flagged) ) without success. Where could I find proper,understandable doc for this? Could anybody help me on configuring such rule(s) ? Thanks a lot in adavance, Pierre

2 3

[Dovecot] Why can NOT login as root
by jana1972＠centrum.cz 20 Sep '11

20 Sep '11

Hi i use Dovecot and it works ok for users except for root user. It is impossible to login as root Here is a log Sep 10 10:15:44 auth: Debug: Loading modules from directory: /usr/local/lib/dovecot/auth Sep 10 10:15:44 auth: Debug: auth client connected (pid=18077) Sep 10 10:15:44 auth: Debug: client in: AUTH 1 PLAIN service=imap secured lip=212.97.133.82 rip=212.97.133.82 lport=143 rport=34645 resp=<hidden> Sep 10 10:15:44 auth: Debug: Loading modules from directory: /usr/local/lib/dovecot/auth Sep 10 10:15:44 auth: Debug: pam(root,212.97.133.82): lookup service=dovecot Sep 10 10:15:44 auth: Debug: pam(root,212.97.133.82): #1/1 style=1 msg=Password: Sep 10 10:15:44 auth: Debug: client out: OK 1 user=root Sep 10 10:15:44 auth: Debug: master in: REQUEST 2889482241 18077 1 3500554cf70742dfc0515671c7671bbd Sep 10 10:15:44 auth: Debug: passwd(root,212.97.133.82): lookup Sep 10 10:15:44 auth: Debug: master out: USER 2889482241 root system_groups_user=root uid=0 gid=0 home=/root Sep 10 10:15:44 imap-login: Info: Login: user=<root>, method=PLAIN, rip=212.97.133.82, lip=212.97.133.82, mpid=18082, secured Sep 10 10:15:44 imap: Error: user root: Invalid settings in userdb: userdb returned 0 as uid Sep 10 10:15:44 imap: Error: Invalid user settings. Refer to server log for more information. Can anyone help? Thanks LL.

7 8

[Dovecot] 2.1: problems compiling fts-lucene - CLucene git version necessary?
by Lutz Preßler 20 Sep '11

20 Sep '11

Hello! I have problems recompiling the Debian squeeze auto build packages with "--with-lecene". Is the git (2.3) version of CLucene necessary? Debian includes 0.9.21b, which does not work. Lutz

2 4

[Dovecot] Default permissions on newly created maildir
by Alex 20 Sep '11

20 Sep '11

Hi Guys, I am setting up SQL auth for mail. Auth works fine, I notice that if no maildir exists for the authenticated user, it is created automatically (depending on the homedir specified in the sql table entry). The problem is that it creates the dir with "700" permissions which is causing grief for my MTA when it comes time for it to try and drop mail there. If I chmod the dir to 770 things work fine. How do I change the default permissions that dovecot uses whenever it creates a new mail account?

1 0

[Dovecot] ODBC support
by list＠airstreamcomm.net 19 Sep '11

19 Sep '11

I was wondering if ODBC support was on the road map for Dovecot, or if it has ever been discussed? Thanks.

1 0

[Dovecot] Deleted mailboxes with lazy_expunge
by Angel L. Mateo 19 Sep '11

19 Sep '11

Hello, I'm trying to configure lazy_expunge plugin (as a way to provide easy backup for mails). This is my configuration (as explained in dovecot wiki): # Default namespace namespace { prefix = separator = / inbox = yes } # namespaces for lazy_expunge plugin: namespace { prefix = .EXPUNGED/ separator = / location = maildir:~/Maildir/expunged } namespace { prefix = .DELETED/ separator = / location = maildir:~/Maildir/deleted } namespace { prefix = .DELETED/.EXPUNGED/ separator = / location = maildir:~/Maildir/deleted/expunged lazy_expunge = .EXPUNGED/ .DELETED/ .DELETED/.EXPUNGED/ I use just one namespace because I don't want to differentiate between deleting mails or deleting mailboxes, but I have the same problem using the 3 namespaces. With this configuration, when a user connects, if he doesn't have the expunged folder, dovecot logs: Sep 16 10:53:35 myotis30 dovecot: imap(angel.luis): Debug: Namespace : type=private, prefix=.EXPUNGED/, sep=/, inbox=no, hidden=no, list=yes, subscriptions=yes location=maildir:~/Maildir/expunged Sep 16 10:53:35 myotis30 dovecot: imap(angel.luis): Debug: maildir++: root=/home/alumnos/46/113246/Maildir/expunged, index=, control=, inbox= Sep 16 10:53:35 myotis30 dovecot: imap(angel.luis): Debug: Namespace .EXPUNGED/: Permission lookup failed from /home/alumnos/46/113246/Maildir/expunged Sep 16 10:53:35 myotis30 dovecot: imap(angel.luis): Debug: Namespace .EXPUNGED/: Using permissions from /home/alumnos/46/113246/Maildir/expunged: mode=0700 gid=-1 and the expunged folder is created (without the cur, new neither tmp folders). When I delete a message in the INBOX folder (for example), dovecot logs: Sep 16 10:57:19 myotis30 dovecot: imap(angel.luis): Debug: Namespace .EXPUNGED/: Permission lookup failed from /home/alumnos/46/113246/Maildir/expunged/.INBOX Sep 16 10:57:19 myotis30 dovecot: imap(angel.luis): Debug: Namespace .EXPUNGED/: Using permissions from /home/alumnos/46/113246/Maildir/expunged: mode=0700 gid=-1 Sep 16 10:57:19 myotis30 dovecot: imap(angel.luis): Debug: Namespace .EXPUNGED/: Permission lookup failed from /home/alumnos/46/113246/Maildir/expunged/.INBOX Sep 16 10:57:19 myotis30 dovecot: imap(angel.luis): Debug: Namespace .EXPUNGED/: Using permissions from /home/alumnos/46/113246/Maildir/expunged: mode=0700 gid=-1 and the message is stored in the expunge namespace (that is an imap INBOX folder is created in the namespace, with its cur, new and tmp, and the message is stored). But when I try to delete a whole imap folder (in the example I delete it from trash folder because I use thunderbird and it previously move the folder to trash), dovecot logs: Sep 16 11:45:46 myotis30 dovecot: imap(angel.luis): Debug: Namespace .DELETED/: Using permissions from /home/alumnos/46/113246/Maildir/deleted: mode=0700 gid=-1 Sep 16 11:45:46 myotis30 dovecot: imap(angel.luis): Debug: Namespace .DELETED/: Permission lookup failed from /home/alumnos/46/113246/Maildir/deleted/.Trash.kk-20110916-114546 Sep 16 11:45:46 myotis30 dovecot: imap(angel.luis): Debug: Namespace .DELETED/: Using permissions from /home/alumnos/46/113246/Maildir/deleted: mode=0700 gid=-1 Sep 16 11:45:46 myotis30 dovecot: imap(angel.luis): Debug: Namespace .DELETED/: Permission lookup failed from /home/alumnos/46/113246/Maildir/deleted/.Trash.kk-20110916-114546 Sep 16 11:45:46 myotis30 dovecot: imap(angel.luis): Debug: Namespace .DELETED/: Using permissions from /home/alumnos/46/113246/Maildir/deleted: mode=0700 gid=-1 and my mail client reports the error "[CANNOT] Can't rename mailboxes accross specified storages" and the mail folder isn't created in the DELETED namespace. Any idea? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 868887590 Fax: 868888337

2 5

[Dovecot] convert maildrop filter to sieve
by Aleksandar Lazic 19 Sep '11

19 Sep '11

Dear list member, does anybody have a script which can convert maildrop filter to sive filter? BR Aleks

2 2

Re: [Dovecot] v2.0.15 released
by Micah Anderson 19 Sep '11

19 Sep '11

"Simon Brereton" <simon.brereton(a)buongiorno.com> writes: > I'll bite.. But it's probably not your concern. When will we be able > to get stable 2.x packages for Debian? Apt installs 1.2.15-7 2.x packages are available in Debian Wheezy and Sid. A backport to Squeeze (stable) will be made once the 1.x transition packages make it into Wheezy (~10 days from now). micah

1 0

[Dovecot] default_pass_scheme = PLAIN and blank password
by Gary V 17 Sep '11

17 Sep '11

I'm using Dovecot 1.2.15 on Ubuntu, but I think this applies to other versions as well. I store user info and passwords in MySQL. It appears 'default_pass_scheme = PLAIN' allows blank passwords. My question is: Is this a bug or is this by design? If it is by design, is there a setting that I'm not aware of that changes this behavior? Of course let me know if you need additional info on the setup I'm using. Thank you, Gary V

1 0

[Dovecot] v2.1.alpha2 released
by Timo Sirainen 17 Sep '11

17 Sep '11

http://dovecot.org/releases/2.1/alpha/dovecot-2.1.alpha2.tar.gz http://dovecot.org/releases/2.1/alpha/dovecot-2.1.alpha2.tar.gz.sig This is actually looking rather stable. I'm still calling it "alpha" in case I think of doing some more API changes, but I think the next one will be called "beta1", hopefully soon followed by "rc1". - Statistics gathering improvements (more fields) and fixes. - Lots of imapc fixes and improvements - Fixes to handling shared namespaces - Several other fixes

3 4

[Dovecot] Auth protocol and XMPP
by Kim Alvefur 17 Sep '11

17 Sep '11

Hello. I've written an authentication backend for the XMPP server Prosody, which makes it use Dovecots auth socket and protocol, and letting the client use any SASL mechanism Dovecot offers. However, setups using the full user@domain as authnid won't work, due to most XMPP clients assuming that the authnid is the localpart. I want to avoid hardcoding it to PLAIN, or otherwise doing MITM/rewrites if possible. (There exists an older auth backend that does just that already) Ideas? -- Kim Alvefur <zash(a)zash.se>

1 0

[Dovecot] Detecting duplicate messages with sieve
by Aleksandar Lazic 17 Sep '11

17 Sep '11

Dear Listmember, I use http://www.courier-mta.org/reformail.html for "Detecting duplicate messages" ### The -D option implements a simple way to delete duplicate messages in incoming mail. filename is a file that will be approximately 'len' bytes long. This file will be used by reformail to save message IDs seen in recent mail. reformail reads the message on standard input. If the message has a Message-ID: header that's already in the cache file, reformail terminates with the exit code set to 0. Otherwise, reformail terminates with the exit code set to 1. ### ### my entry in mailfilter `reformail -D 8192 $HOME/.msg.cache` if ($RETURNCODE == 0) { /^From: *!.*/ FROM1=${MATCH2} /^Subject: *!.*/ log "$FROM (${FROM1}) => Not Delivered duplicate MSG-ID. Subject ${MATCH2}\n" exit } ### Is there a similar feature in sieve or can I still use the upper setup? Another question is about to add this header line in every mail. xfilter "${REFORMAIL} -a\"Lines: $LINES\"" Thanks for your help. BR Aleks

2 2

[Dovecot] Sieve envelope :detail "to" "extention" does not deliver to fileinto destination
by Aleksandar Lazic 17 Sep '11

17 Sep '11

Dear Listmember. I resend this with different Subject so that the spamfilter does not drop the mail, I hope ;-) I try to migrate from my current courier-mta setup fo postfix dovecot setup. I use the following scirpt to filter to the destination mailbox. ### /var/vmail/none.at/al/.dovecot.sieve # from http://wiki.dovecot.org/LDA/Sieve require ["fileinto", "envelope", "subaddress", "include"]; include "lists.sieve"; if envelope :detail "to" "work" { fileinto "INBOX.work"; } ### ### /var/vmail/none.at/al/sieve/lists.sieve require ["fileinto", "subaddress", "envelope" ]; if envelope :detail "to" "pdnsusers" { fileinto "Lists.pdnsusers"; } ### postfix/master ### dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop} -a ${original_recipient} # flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop} -m ${extension} -a ${original_recipient} ### Log ### Sep 11 21:47:48 lvps46-163-74-15 postfix/smtpd[7788]: connect from Sep 11 21:48:12 lvps46-163-74-15 postfix/smtpd[7788]: 495EF9FECAF9: Sep 11 21:48:27 lvps46-163-74-15 postfix/cleanup[7795]: 495EF9FECAF9: message-id=<> Sep 11 21:48:27 lvps46-163-74-15 postfix/qmgr[7785]: 495EF9FECAF9: from=<al(a)bitrace.net>, size=268, nrcpt=1 (queue active) Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda: Debug: Loading modules from directory: /usr/lib/dovecot/modules Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda: Debug: Module loaded: /usr/lib/dovecot/modules/lib90_sieve_plugin.so Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda: Debug: auth input: al(a)none.at uid=5000 gid=5000 home=/var/vmail/none.at/al Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: Effective uid=5000, gid=5000, home=/var/vmail/none.at/al Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: maildir: root exists (/var/vmail/none.at/al/Maildir) Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: maildir++: root=/var/vmail/none.at/al/Maildir, index=, control=, inbox=/var/vmail/none.at/al/Maildir, alt= Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: none: root=, index=, control=, inbox=, alt= Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: Destination address: al-pdnsuser(a)none.at (source: -a parameter) Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: sieve: using sieve path for user's script: /var/vmail/none.at/al/.dovecot.sieve Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: sieve: opening script /var/vmail/none.at/al/.dovecot.sieve Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: sieve: script binary /var/vmail/none.at/al/.dovecot.svbin successfully loaded Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: sieve: binary save: not saving binary /var/vmail/none.at/al/.dovecot.svbin, because it is already stored Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: sieve: executing script from /var/vmail/none.at/al/.dovecot.svbin Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): sieve: msgid=unspecified: stored mail into mailbox 'INBOX' Sep 11 21:48:27 lvps46-163-74-15 postfix/pipe[7797]: 495EF9FECAF9: to=<al-pdnsuser(a)none.at>, relay=dovecot, delay=28, delays=28/0.02/0/0.22, dsn=2.0.0, status=sent (delivered via dovecot service) Sep 11 21:48:27 lvps46-163-74-15 postfix/qmgr[7785]: 495EF9FECAF9: removed Sep 11 21:48:28 lvps46-163-74-15 postfix/smtpd[7788]: disconnect from xxx ### dovecot -n => attachment dovecot_-n ~#: egrep -v '^(#|$)' /etc/dovecot/dovecot-sql.conf #### driver = mysql connect = host=127.0.0.1 dbname=mailserver user=$USER \ password=$PASSWORD default_pass_scheme = PLAIN-MD5 password_query = SELECT user_email AS user, \ user_password AS password \ FROM virtual_users WHERE user_email='%u'; #### Due to the fact that I'am new to dovecot and sieve I hope anybody can help the solve this issue. My target is to filter the mailinglists based on address extention or is it better to filter on to header? Is there a 'log' or 'print' command in the sieve filter or how can I write a message to the log file? Many thanks for your help BR Aleks

3 9

Re: [Dovecot] v2.0.15 released
by Eduardo M KALINOWSKI 17 Sep '11

17 Sep '11

On Sex, 16 Set 2011, Simon Brereton wrote: > I'll bite.. But it's probably not your concern. When will we be > able to get stable 2.x packages for Debian? Apt installs 1.2.15-7 In Debian stable? Only when the next stable version (wheezy) is released. Not in squeeze. Though perhaps a backport might appear. -- Colors may fade in time. Eduardo M KALINOWSKI eduardo(a)kalinowski.com.br

3 3

Re: [Dovecot] imapc and imap_acl
by Lutz Preßler 16 Sep '11

16 Sep '11

On Tue, 13 Sep 2011, Lutz Preßler wrote: > On Di, 13 Sep 2011, Timo Sirainen wrote: > > You mean you'd want local ACLs that apply to imapc mailboxes? > Yes, exactly. Great for "integrating" legacy IMAP servers without e.g. > ACL support. ... but as long as imapc parameters are global that's of no real use, I just realized... > > I think that should work. For example if you set: > > > > mail_location = imapc:~/imapc > > Then for mailbox foo/bar the ACL file should be in ~/imapc/.foo.bar/dovecot-acl > It almost works: > Sep 13 18:37:58 hhh dovecot: imap(4482, uuu): Error: file_dotlock_open(/home/uuu/Maildir/gmail/.[Gmail].Alle Nachrichten > /dovecot-acl) failed: No such file or directory > After manually creating the ".[Gmail].Alle Nachrichten" directory, SETACL > succeeds. ... so this does not really matter yet. Lutz

1 0

[Dovecot] sharing of non-INBOX namespaces? Re: imapc and imap_acl
by Lutz Preßler 16 Sep '11

16 Sep '11

Hi, On Tue, 13 Sep 2011, Lutz Preßler wrote: > On Di, 13 Sep 2011, Timo Sirainen wrote: > > You mean you'd want local ACLs that apply to imapc mailboxes? > Yes, exactly. Great for "integrating" legacy IMAP servers without e.g. > ACL support. > > I think that should work. For example if you set: > > > > mail_location = imapc:~/imapc > Oh, had not realized that a path argument is possible for imapc:. There are > even index file then... > > > > Then for mailbox foo/bar the ACL file should be in ~/imapc/.foo.bar/dovecot-acl > It almost works: > Sep 13 18:37:58 hhh dovecot: imap(4482, uuu): Error: file_dotlock_open(/home/uuu/Maildir/gmail/.[Gmail].Alle Nachrichten > /dovecot-acl) failed: No such file or directory > After manually creating the ".[Gmail].Alle Nachrichten" directory, SETACL > succeeds. Ok, I thought I tested accessing the mailbox afterwards, too - but I probably had not. I have a more general problem now: shared mailboxes from any "non-INBOX" namespace are not available to other users. That's not only with virtual or imapc namespaces, but also tested with two Maildir ones: namespace personal { inbox = yes location = maildir:~/Maildir prefix = INBOX. type = private } namespace second { inbox = no location = maildir:~/Maildir2 prefix = INBOX.second. type = private } namespace others { type = shared separator = . prefix = INBOX.shared.%%u. location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u #location = maildir:/home/%%n/Maildir:INDEX=~/Maildir/shared/%%u subscriptions = no list = children } [...] I can as user1 SETACL INBOX.second.box ~user1/Maildir2/dovecot-acl-list contains "1316082286 box" ~user1/Maildir2/.box/dovecot-acl contains "user=testuser lrs" (as does ~user1/Maildir/.in2007/dovecot-acl) The shared mailboxes dict contains shared/shared-boxes/user/testuser/user1 1 But - as testuser - 0 list "" "*" * LIST (\HasChildren) "." "INBOX" * LIST (\HasNoChildren) "." "INBOX.test" * LIST (\HasNoChildren) "." "INBOX.second" * LIST (\Noselect \HasChildren) "." "INBOX.shared.user1" * LIST (\HasNoChildren) "." "INBOX.virtual" * LIST (\HasNoChildren) "." "INBOX.shared.user1.in2007" 0 OK List completed. INBOX.shared.user1.second.box is missing. Also 0 select INBOX.shared.user1.second.box * OK [CLOSED] Previous mailbox closed. 0 NO Mailbox doesn't exist: second.box Log shows then: Sep 15 12:39:48 host dovecot: imap(8796, testuser): Debug: acl vfile: file /etc/dovecot/global-acls/INBOX.shared.user1.second.box not found Sep 15 12:39:48 host dovecot: imap(8796, testuser): Debug: acl vfile: file /home/user1/Maildir/.second.box/dovecot-acl not found ... not searching for the acl file correctly. Thought I tested this with earlier (2.0) versions. Changed group set up inbetween, but this does not seem relevant. Regards, Lutz

2 4

Re: [Dovecot] v2.0.15 released
by Odhiambo Washington 16 Sep '11

16 Sep '11

I think someone else is responsible for the Debianization of Dovecot, not Timo. On Fri, Sep 16, 2011 at 19:05, Simon Brereton <simon.brereton(a)buongiorno.com > wrote: > -----Original Message----- > From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] On > Behalf Of Timo Sirainen > > http://dovecot.org/releases/2.0/dovecot-2.0.15.tar.gz > http://dovecot.org/releases/2.0/dovecot-2.0.15.tar.gz.sig > > + doveadm altmove: Added -r parameter to move mails back to primary > storage. > - v2.0.14: Index reading could have eaten a lot of memory in some > situations > - doveadm index no longer affects future caching decisions > - mbox: Fixed crash during mail delivery when mailbox didn't yet > have > GUID assigned to it. > - zlib+mbox: Fetching last message from compressed mailboxes > crashed. > - lib-sql: Fixed load balancing and error handling when multiple > hosts > are used. > > > ----------- > > I'll bite.. But it's probably not your concern. When will we be able to > get stable 2.x packages for Debian? Apt installs 1.2.15-7 > > Thanks. > > Simon > (Sorry about breaking the quotes) > > -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ I can't hear you -- I'm using the scrambler. Please consider the environment before printing this email.

1 0

[Dovecot] v2.0.15 released
by Timo Sirainen 16 Sep '11

16 Sep '11

http://dovecot.org/releases/2.0/dovecot-2.0.15.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.15.tar.gz.sig + doveadm altmove: Added -r parameter to move mails back to primary storage. - v2.0.14: Index reading could have eaten a lot of memory in some situations - doveadm index no longer affects future caching decisions - mbox: Fixed crash during mail delivery when mailbox didn't yet have GUID assigned to it. - zlib+mbox: Fetching last message from compressed mailboxes crashed. - lib-sql: Fixed load balancing and error handling when multiple hosts are used.

2 1

[Dovecot] Dsync Permissions Issue
by Asai 16 Sep '11

16 Sep '11

Greetings, I recently upgraded Dovecot from 1.2 to 2.0.14, for purposes of using Dsync to migrate emails from one server to another. I'm using MySQL for authentication. However I get this error message when I try to run Dsync, and after looking around for an answer, I'm at a bit of a loss: [root@triata ~]# dsync -v -u asai(a)globalchangemusic.org backup ssh -p22222 vmail(a)xx.xxx.xx.xxx dsync -u asai(a)globalchangemusic.org vmail(a)xx.xxx.xx.xxx's password: dsync(vmail): Error: userdb lookup: connect(/var/run/dovecot/auth-userdb) failed: Permission denied (euid=1001(vmail) egid=1001(vmail) missing +r perm: /var/run/dovecot/auth-userdb, euid is not dir owner) dsync(vmail): Fatal: User lookup failed: Internal error occurred. Refer to server log for more information. dsync-local(asai(a)globalchangemusic.org): Error: read() from worker server failed: EOF Config as follows: [root@triata ~]# doveconf -n # 2.0.14: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-92.1.10.el5.xs5.0.0.39xen x86_64 CentOS release 5 (Final) ext3 auth_mechanisms = plain login mail_home = /vmail/%d/%n/home mail_location = maildir:/vmail/%d/%n managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { inbox = yes location = prefix = separator = / type = private } passdb { args = /etc/dovecot-mysql.conf driver = sql } plugin { sieve = /vmail/%d/%n/sievescript } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = vmail mode = 0660 user = vmail } unix_listener auth-userdb { group = vmail mode = 0666 user = vmail } user = root } ssl_cert = </etc/ssl/triata.globalchangemultimedia.net/mailserver/smtpd.pem ssl_key = </etc/ssl/triata.globalchangemultimedia.net/mailserver/smtpd.pem userdb { driver = passwd } userdb { args = /etc/dovecot-mysql.conf driver = sql } protocol lda { hostname = triata.globalchangemultimedia.net mail_plugin_dir = /usr/lib64/dovecot/ mail_plugins = sieve postmaster_address = postmaster(a)globalchangemultimedia.net } --

2 2

[Dovecot] unexpected LSUB / LIST (SUBSCRIBED) output Re: Panic: file mailbox-list-subscriptions.c: line 66 (mailbox_list_subscription_fill_one): assertion failed: (ns!= NULL && (ns->flags & NAMESPACE_FLAG_AUTOCREATED) != 0)
by Lutz Preßler 16 Sep '11

16 Sep '11

On Thu, 15 Sep 2011, Timo Sirainen wrote: > On Wed, 2011-09-14 at 12:10 +0200, Lutz Preßler wrote: > > imap(2717, testuser): Panic: file mailbox-list-subscriptions.c: line > > 66 (mailbox_list_subscription_fill_one): assertion failed: (ns!= NULL > > && (ns->flags & NAMESPACE_FLAG_AUTOCREATED) != 0) > > > Fixed: http://hg.dovecot.org/dovecot-2.1/rev/309a707c22c0 No assertion anymore. 0 login testuser password [...] 0 list "" "*" * LIST (\HasChildren) "." "INBOX" * LIST (\HasNoChildren) "." "INBOX.test" * LIST (\Noselect \HasChildren) "." "INBOX.shared.user1" * LIST (\HasNoChildren) "." "INBOX.virtual" * LIST (\HasNoChildren) "." "INBOX.shared.user1.in2007" 0 OK List completed. 0 lsub "" "*" * LSUB (\Noselect) "." "INBOX.shared.user1" 0 OK Lsub completed. 0 list (subscribed) "" "*" * LIST (\NonExistent) "." "INBOX.shared.user1" 0 OK List completed. >>> ~testuser/Maildir/subscription is empty here 0 subscribe INBOX.shared.user1.in2007 0 OK Subscribe completed. 0 lsub "" "*" * LSUB (\Noselect) "." "INBOX.shared.user1" * LSUB () "." "INBOX.shared.user1.in2007" 0 OK Lsub completed. 0 list (subscribed) "" "*" * LIST (\NonExistent) "." "INBOX.shared.user1" * LIST (\Subscribed) "." "INBOX.shared.user1.in2007" 0 OK List completed. >>> ~testuser/Maildir/subscription now contains "shared.user1.in2007" Is this "INBOX.shared.user1" LSUB/LIST output correct? Lutz

2 1

[Dovecot] Shared folder not listing
by Tom Clark 16 Sep '11

16 Sep '11

Hi Timo, I've got a weird problem on our dovecot. We're trying to setup private shared folder access. I have 2 users. tom(a)mailbox.com and system(a)mailbox.com. I have set the ACL's on all the folders (and subfolders) on system(a)mailbox.com. However, I'm not getting any of them listed when I check tom(a)mailbox.com <mailto:tom@mailbox.com's> 's IMAP folders. Our configuration is below (we're migrating from Courier hence the INBOX.): In 10-mail.conf: namespace { type = private prefix = INBOX. separator = . inbox = yes list = yes hidden = yes } namespace { type = shared separator = . prefix = INBOX.Shared.%%u location = maildir:%%h/Maildir:INDEX=~/Maildir/Shared/%%u subscriptions = no list = children } mail_plugins = acl protocol imap { mail_plugins = $mail_plugins imap_acl } In 90-acl.conf: plugin { #acl = vfile:/etc/dovecot/acls:cache_secs=300 acl = vfile } # To let users LIST mailboxes shared by other users, Dovecot needs a # shared mailbox dictionary. For example: plugin { acl_shared_dict = file:/var/vpopmail/domains/%d/shared-mailboxes } Have I missed anthing!?!? Thanks in advance! Tom

3 4

Re: [Dovecot] dovecot Digest, Vol 101, Issue 26
by Alan Brown 15 Sep '11

15 Sep '11

> From: Timo Sirainen <tss(a)iki.fi> > Subject: Re: [Dovecot] general advice sought > Message-ID: <1315830847.7326.48.camel@hurina> > Content-Type: text/plain; charset="ISO-8859-15" > > On Mon, 2011-09-12 at 13:11 +0100, Alan Brown wrote: >> I'd like to hear the thoughts of list members on which type of storage >> method seems "best" for inboxes and for folders. >> >> The filesystem is GFS2 and for various reasons I can't change it. > .. >> If I migrate to other formats (eg mdbox), then it needs to be able to be >> done on the fly. (Taking the mailservers down for a day won't go down >> well, even an hour raises howls). > > Have you had any trouble with Dovecot's index files in your current > setup? Any errors at all? Zero. The issues which have arisen are: 1: Really slow access to messages in large folders (GFS2 issue) 2: Users trashing their inbox then demanding we drop everything to restore "all my important mail" > If not, I'd think mdbox will work fine. You > can do it incrementally per-user (and you really should try it first > with only a few users). http://wiki2.dovecot.org/Tools/Dsync explains > how to do it on the fly. I thought so too, just wanted to hear opinions on doing it vs other approaches. :)

1 0

[Dovecot] Warning: Subscriptions file .. Removing invalid entry:
by Jan-Frode Myklebust 15 Sep '11

15 Sep '11

One of our dovecot-servers (v2.0.14) got a bit too busy last evening: Sep 13 20:39:18 popimap1 dovecot: master: Warning: service(pop3-login): process_limit reached, client connections are being dropped then logged a few: Sep 13 20:39:20 popimap1 dovecot: pop3(XXXXXXXXX(a)YYYYY.YY): Warning: I/O leak: 0x3829233d20 (10) Sep 13 20:39:20 popimap1 dovecot: pop3(XXXXXXXXX(a)YYYYY.YY): Warning: Timeout leak: 0x3829233ce0 Sep 13 20:39:20 popimap1 dovecot: pop3(ZZZZZ.ZZZZZ(a)ZZZZZZ.ZZ): Warning: I/O leak: 0x3829233d20 (10) Sep 13 20:39:20 popimap1 dovecot: pop3(ZZZZZ.ZZZZZ(a)ZZZZZZ.ZZ): Warning: Timeout leak: 0x3829233ce0 Sep 13 20:39:20 popimap1 dovecot: pop3(YYYYYYY(a)YYYY.YYY): Warning: I/O leak: 0x3829233d20 (10) Sep 13 20:39:20 popimap1 dovecot: pop3(YYYYYYY(a)YYYY.YYY): Warning: Timeout leak: 0x3829233ce0 Sep 13 20:39:20 popimap1 dovecot: pop3-postlogin: Error: Fatal: fd_send() failed: Broken pipe Sep 13 20:39:20 popimap1 dovecot: pop3-postlogin: Error: Fatal: fd_send() failed: Broken pipe and: Error: net_connect_unix(/var/run/dovecot/pop3-postlogin) failed: Resource temporarily unavailable but what has me a bit worried is these: imap(user(a)xxx.xxx): Warning: Subscriptions file /path/to/user(a)xxx.xxx/subscriptions: Removing invalid entry: .Sent imap(user(a)xxx.xxx): Warning: Subscriptions file /path/to/user(a)xxx.xxx/subscriptions: Removing invalid entry: .Spam imap(user(a)xxx.xxx): Warning: Subscriptions file /path/to/user(a)xxx.xxx/subscriptions: Removing invalid entry: .Drafts imap(user(a)xxx.xxx): Warning: Subscriptions file /path/to/user(a)xxx.xxx/subscriptions: Removing invalid entry: .Trash which happened for a two users during this high load periode. Looking at their mail directory I can't see why these should be invalid? They're there, has sane permissions and contains messages.. -jf

2 3

[Dovecot] multiple "imapc namespaces" Re: imapc and imap_acl
by Lutz Preßler 15 Sep '11

15 Sep '11

On Tue, 13 Sep 2011, Lutz Preßler wrote: > On Di, 13 Sep 2011, Timo Sirainen wrote: > > mail_location = imapc:~/imapc > Oh, had not realized that a path argument is possible for imapc:. There are > even index file then... What about taking imapc parameters/credentials optionally from a file in this directory (like dovecot-virtual)? Lutz

2 1

[Dovecot] LDA panics without sieve script
by Jürgen Obermann 15 Sep '11

15 Sep '11

The dovecot lda panics with "Trying to sync mailbox INBOX with open transactions" if a user has no sieve script defined. Debugging shows: Sep 14 19:49:26 server dovecot: [ID 583609 local0.debug] lda(userxx): Debug: sieve: user's script path /home/grp/userxx/.dovecot.sieve doesn't exist (using global script path in stead) Sep 14 19:49:26 server dovecot: [ID 583609 local0.debug] lda(userxx): Debug: sieve: user has no valid personal script Sep 14 19:49:26 server dovecot: [ID 583609 local0.debug] lda(userxx): Debug: sieve: no scripts to execute: reverting to default delivery. Sep 14 19:49:26 server dovecot: [ID 583609 local0.crit] lda(userxx): Panic: Trying to sync mailbox INBOX with open transactions Sep 14 19:49:26 server dovecot: [ID 583609 local0.error] lda(userxx): Error: Raw backtrace: 0xff1cc2ac -> 0xff1cbb70 -> 0xff2a6474 -> 0xff2a668c -> 0xff2fa444 -> 0xff2a63c8 -> 0xff2668ec -> 0xff266f74 -> 0xff26741c -> 0x12720 -> 0x11948 I then did create an empty sieve script file with touch /home/grp/userxx/.dovecot.sieve and after that lda worked: Sep 14 19:50:55 server dovecot: [ID 583609 local0.debug] lda(userxx): Debug: sieve: using sieve path for user's script: /home/grp/userxx/.dovecot.sieve Sep 14 19:50:55 server dovecot: [ID 583609 local0.debug] lda(userxx): Debug: sieve: opening script /home/grp/userxx/.dovecot.sieve Sep 14 19:50:55 server dovecot: [ID 583609 local0.debug] lda(userxx): Debug: sieve: script /home/grp/userxx/.dovecot.sieve successfully compiled Sep 14 19:50:55 server dovecot: [ID 583609 local0.debug] lda(userxx): Debug: sieve: executing script from /home/grp/userxx/.dovecot.sieve Sep 14 19:50:56 server dovecot: [ID 583609 local0.info] lda(userxx): save: box=INBOX, uid=6, msgid=<201109141750.p8EHotbE015854(a)server.hrz.uni-giessen.de>, size=1035 Sep 14 19:50:56 server dovecot: [ID 583609 local0.debug] lda(userxx): Debug: box=/var/mail/userxx mount=/var/mail match=yes Sep 14 19:50:56 server dovecot: [ID 583609 local0.info] lda(userxx): sieve: msgid=<201109141750.p8EHotbE015854(a)server.hrz.uni-giessen.de>: stored mail into mailbox 'INBOX' I think the lda worked in previous releases without a sieve script file in the users home directory. dovecot -n output is: # 2.0.14: /opt/local/etc/dovecot/dovecot.conf # OS: SunOS 5.10 sun4v auth_debug = yes auth_debug_passwords = yes auth_verbose = yes disable_plaintext_auth = no listen = server.hrz.uni-giessen.de localhost mail_debug = yes mail_fsync = always mail_location = mbox:~/Mail:INBOX=/var/mail/%u mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = mail_log notify quota mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mmap_disable = yes namespace { inbox = yes location = prefix = separator = / type = private } namespace { hidden = yes list = no location = prefix = Mail/ separator = / subscriptions = yes type = private } passdb { driver = pam } passdb { args = /opt/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { autocreate = Trash autocreate2 = caughtspam autocreate3 = Sent autosubscribe = Trash autosubscribe2 = caughtspam autosubscribe3 = Sent mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size quota = fs:Home-Verzeichnis:noenforcing quota2 = fs:INBOX:noenforcing:mount=/var/mail sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } postmaster_address = postmaster(a)hrz.uni-giessen.de protocols = imap pop3 lmtp sieve sendmail_path = /usr/lib/sendmail service auth { client_limit = 11120 } service imap-login { process_min_avail = 16 service_count = 0 vsz_limit = 640 M } service imap { process_limit = 4096 vsz_limit = 1 G } ssl_cert = </etc/ssl/server.crt ssl_key = </etc/ssl/server.key syslog_facility = local0 userdb { driver = passwd } version_ignore = yes protocol lda { info_log_path = log_path = mail_plugins = mail_log notify quota sieve } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep mail_max_userip_connections = 20 mail_plugins = mail_log notify quota autocreate imap_quota } protocol lmtp { mail_plugins = mail_log notify quota sieve } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xv%08Xu } -- Hochschulrechenzentrum der | Mail: Juergen.Obermann(a)hrz.uni-giessen.de Justus-Liebig-Universitaet | WWW: http://www.uni-giessen.de/obermann/ Heinrich-Buff-Ring 44 | Tel: 0641-99-13054 (0641-99-13001) D-35392 Giessen, Germany | Fax: 0641-99-13009

3 2

[Dovecot] Maildir "locking"
by Attila Nagy 15 Sep '11

15 Sep '11

Hello, I'm looking for the alternative of qmail's chmod -t (sticky bit on the maildir root) for Dovecot. What I'm trying to achieve with this lock: - Dovecot lmtp should give back a temporary error (so the email will be deferred and re-delivered later) - all other Dovecot daemons (pop, imap) should work as usual, but should not alter maildir contents (they can modify their own files, like indexes, logs etc) What is the best way to do this? If there is no such thing currently, would it be hard to implement the sticky bit checking on the root? Thanks,

2 6

[Dovecot] imapc vs auth-userdb security
by Lutz Preßler 15 Sep '11

15 Sep '11

Hello, with imapc settings coming from userdb (individual configuration necessary) there exists a security problem if access to auth-userdb socket is given to normal (shell) users: testuser@host:~$ doveadm user user1 userdb: lpmail uid : 1000 gid : 1111 home : /home/user1 namespace : gmail namespace/gmail/list: yes namespace/gmail/subscriptions: no namespace/gmail/separator: . namespace/gmail/prefix: INBOX.gmail. namespace/gmail/location: imapc:~/Maildir/gmail imapc_host: imap.gmail.com imapc_user: someuser(a)gmail.com imapc_password: cleartextpassword! imapc_ssl : imaps imapc_ssl_ca_dir: /etc/ssl/certs imapc_port: 993 Lutz

2 3

[Dovecot] Which dovecot-antispam with dovecot 2?
by Svoop 14 Sep '11

14 Sep '11

Hi I'm a little confused as there are two repos for the dovecot-antispam plugin. Eugene's hg repo is explicitly labeled "for Dovecot 2", but the Johannes' git repo has commits later in date: hg: http://wiki2.dovecot.org/Plugins/Antispam git: http://git.sipsolutions.net/?p=dovecot-antispam.git I guess the unrelease hg code ist the one for Dovecot 2, but what is Eugene's 1.4 code for? Thanks!

2 1

[Dovecot] Shredding instead of deleting
by Mike Cardwell 14 Sep '11

14 Sep '11

Hi, I have a wishlist item. Is there an appropriate place for me to post it? Basically, I would like to know that my email isn't recoverable from the local disk on the mail server after I delete it. So instead of just deleting the file from my Maildir, I'd like the option to exist for Dovecot to shred it.. Ie, overwrite the file with random data and/or null bytes before deletion. In the same way that GNU shred behaves: https://www.gnu.org/software/coreutils/manual/html_node/shred-invocation.ht… -- Mike Cardwell https://grepular.com/ https://twitter.com/mickeyc Professional http://cardwellit.com/ http://linkedin.com/in/mikecardwell PGP.mit.edu 0018461F/35BC AF1D 3AA2 1F84 3DC3 B0CF 70A5 F512 0018 461F

4 8

Re: [Dovecot] Mails repopping
by Michael M Slusarz 14 Sep '11

14 Sep '11

Quoting Simon Brereton <simon.brereton(a)buongiorno.com>: >> -----Original Message----- >> From: dovecot-bounces(a)dovecot.org [mailto:dovecot- >> bounces(a)dovecot.org] On Behalf Of Simon Brereton >> > -----Original Message----- >> > From: Timo Sirainen [mailto:tss@iki.fi] On Fri, 2011-09-09 at 13:07 >> > -0400, Simon Brereton wrote: >> > >> > > I have a server that's been running Courier for about 6 years and >> > in >> > > all that time I think I've only ever had 1 issues where an entire >> > mail >> > > box was repopped by a webmail client. However, since moving to a >> > new >> > > server and dovecot 4 weeks ago, I've now had the webmail client >> > repop >> > > this account 4 times (there are about 230 mails in the account). >> > > >> > > Is there a setting I need to tighten to prevent/remedy this? I >> > have >> > > no idea if it's happening on other accounts, but this is one that >> I >> > > see. The format is maildir. There has been no changes to the >> > webmail >> > > client. >> > >> > dovecot -n output would have been nice. Also do you see anything in >> > error logs? >> >> Ah. My apologies of course. Here it is.. >> >> mail:~# dovecot -n >> # 1.2.15: /etc/dovecot/dovecot.conf >> # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.2 ext3 >> log_timestamp: %Y-%m-%d %H:%M:%S >> protocols: imap imaps pop3 pop3s >> ssl_ca_file: /etc/ssl/keys/rhodes-ca.crt >> ssl_cert_file: /etc/ssl/keys/mail.domain.net.crt >> ssl_key_file: /etc/ssl/private/mail.domain.net.key >> disable_plaintext_auth: no >> login_dir: /var/run/dovecot/login >> login_executable(default): /usr/lib/dovecot/imap-login >> login_executable(imap): /usr/lib/dovecot/imap-login >> login_executable(pop3): /usr/lib/dovecot/pop3-login >> mail_privileged_group: mailsystem >> mail_location: maildir:/var/spool/mail/virtual/%d/%n >> maildir_very_dirty_syncs: yes >> mbox_write_locks: fcntl dotlock >> mail_executable(default): /usr/lib/dovecot/imap >> mail_executable(imap): /usr/lib/dovecot/imap >> mail_executable(pop3): /usr/lib/dovecot/pop3 >> mail_plugins(default): quota imap_quota >> mail_plugins(imap): quota imap_quota >> mail_plugins(pop3): quota >> mail_plugin_dir(default): /usr/lib/dovecot/modules/imap >> mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap >> mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 >> imap_client_workarounds(default): outlook-idle delay-newmail >> imap_client_workarounds(imap): outlook-idle delay-newmail >> imap_client_workarounds(pop3): >> pop3_client_workarounds(default): >> pop3_client_workarounds(imap): >> pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh >> lda: >> postmaster_address: postmaster(a)domain.net >> mail_plugins: quota >> log_path: >> info_log_path: >> deliver_log_format: msgid=%m: %f: %$ >> auth default: >> mechanisms: plain login >> user: mailsystem >> verbose: yes >> passdb: >> driver: sql >> args: /etc/dovecot/dovecot-sql.conf >> userdb: >> driver: prefetch >> userdb: >> driver: static >> args: uid=999 gid=115 home=/var/spool/mail/virtual/%d/%n >> allow_all_users=yes >> socket: >> type: listen >> client: >> path: /var/spool/postfix/private/auth >> mode: 432 >> user: postfix >> group: mailsystem >> master: >> path: /var/run/dovecot/auth-master >> mode: 432 >> user: mailsystem >> group: mailsystem >> plugin: >> quota: maildir >> >> Could you make dovecot -n munge the certificate and postmaster email >> addresses? I'm not comfortable with that floating on the internet.. >> >> The only thing I have in the logs is 2 sessions where mail was popped >> (note, it doesn't even add up to the 183 messages in the mail box). >> But those sessions are vastly longer than the regular ones (tens of >> minutes compared to a few seconds). Since both IPs are on the back- >> bone, that's quite a while to download 100 mails (none of which are >> over >> >> Sep 11 21:36:25 mail dovecot: pop3-login: Login: >> user=<user(a)domain.com>, method=PLAIN, rip=64.88.168.84, >> lip=83.170.65.xxx, TLS Sep 11 21:36:34 mail dovecot: >> POP3(user(a)domain.com): Disconnected: Logged out top=0/0, retr=0/0, >> del=0/183, size=14025971 Sep 11 21:43:44 mail dovecot: pop3-login: >> Login: user=<user(a)domain.com>, method=PLAIN, rip=64.88.168.84, >> lip=83.170.65.xxx, TLS Sep 11 21:44:54 mail dovecot: >> POP3(user(a)domain.com): Disconnected: Logged out top=0/0, retr=0/0, >> del=0/183, size=14025971 Sep 11 21:52:31 mail dovecot: pop3-login: >> Login: user=<user(a)domain.com>, method=PLAIN, rip=64.88.168.84, >> lip=83.170.65.xxx, TLS Sep 11 22:56:01 mail dovecot: >> POP3(user(a)domain.com): Disconnected: Logged out top=0/0, >> retr=100/9182678, del=0/183, size=14025971 Sep 11 23:08:58 mail >> dovecot: pop3-login: Login: user=<user(a)domain.com>, method=PLAIN, >> rip=64.88.168.84, lip=83.170.65.xxx, TLS Sep 11 23:37:57 mail >> dovecot: POP3(user(a)domain.com): Disconnected: Logged out top=0/0, >> retr=75/4748674, del=0/183, size=14025971 Sep 12 00:04:11 mail >> dovecot: pop3-login: Login: user=<user(a)domain.com>, method=PLAIN, >> rip=64.88.168.84, lip=83.170.65.xxx, TLS Sep 12 00:04:26 mail >> dovecot: POP3(user(a)domain.com): Disconnected: Logged out top=0/0, >> retr=0/0, del=0/183, size=14025971 Sep 12 00:07:40 mail dovecot: >> pop3-login: Login: user=<user(a)domain.com>, method=PLAIN, >> rip=64.88.168.84, lip=83.170.65.xxx, TLS Sep 12 00:07:53 mail >> dovecot: POP3(user(a)domain.com): Disconnected: Logged out top=0/0, >> retr=0/0, del=0/183, size=14025971 >> >> >> > If you're using the default pop3_uidl_format it'll rely on IMAP >> UIDs >> > to stay the same, and I guess it's possible that due to some other >> > problem they change (that should be logged as an error/warning >> > though). >> > >> > You could try setting pop3_uidl_format=%f, but it will cause >> everyone >> > to redownload mails. With newer Dovecot versions you could set >> > pop3_save_uidl=yes and when you think everyone's downloaded mails >> once >> > you can safely change the pop3_uidl_format. >> >> Sorry, I'm very new to dovecot and I'm not sure I understand. I >> presume because neither of those keys are in the dovecot -n output >> that they are as the defaults, yes? The account is indeed accessed >> by IMAP as well (from a mobile device mostly), but I don't see >> anything fishy there either. How could I see if the IMAP UIDs have >> changed? >> >> Sep 11 21:20:32 mail dovecot: IMAP(user(a)domain.com): Connection >> closed bytes=1095/8292 >> >> Sep 11 21:26:03 mail dovecot: imap-login: Login: >> user=<user(a)domain.com>, method=PLAIN, rip=174.252.83.244, >> lip=83.170.65.xxx, TLS Sep 11 22:11:20 mail dovecot: >> IMAP(user(a)domain.com): Disconnected for inactivity bytes=725/5638 Sep >> 11 22:17:10 mail dovecot: imap-login: Login: user=<user(a)domain.com>, >> method=PLAIN, rip=174.252.83.244, lip=83.170.65.xxx, TLS Sep 11 >> 23:12:06 mail dovecot: IMAP(user(a)domain.com): Disconnected for >> inactivity bytes=1471/11025 Sep 11 23:23:22 mail dovecot: imap-login: >> Login: user=<user(a)domain.com>, method=PLAIN, rip=174.252.83.244, >> lip=83.170.65.xxx, TLS Sep 11 23:52:52 mail dovecot: >> IMAP(user(a)domain.com): Connection closed bytes=1841/13679 Sep 12 >> 00:08:47 mail dovecot: imap-login: Login: user=<user(a)domain.com>, >> method=PLAIN, rip=174.252.83.244, lip=83.170.65.xxx, TLS Sep 12 >> 01:19:05 mail dovecot: imap-login: Login: user=<user(a)domain.com>, >> method=PLAIN, rip=174.252.83.244, lip=83.170.65.xxx, TLS Sep 12 >> 02:57:01 mail dovecot: IMAP(user(a)domain.com): Connection closed >> bytes=2713/60026 Sep 12 02:57:01 mail dovecot: IMAP(user(a)domain.com): >> Connection closed bytes=2688/18635 >> >> >> There are no errors or warnings in the mail log (I have one shared >> log file for postfix, amavis and dovecot). Reading the notes for >> pop3_save_uidl it doesn't seem to be a dangerous option - should I >> turn that on? Why will it force everyone to redownload mails >> (there's nothing about it on the wiki)? >> >> Thanks! >> >> Simon > > Any help would be appreciated. What do you mean by "repopped"? You mean downloading the entire data of the messages from the POP3 server? This is expected behavior when using a stateless (e.g. webmail) client. Kind of the whole reason you don't use POP3 in the first place. Although caching can help. e.g., Here's what the first connection to the server looks like (this is using IMP 5 on a mailstore with 82 messages): S (1315951197.4976): +OK Dovecot ready. C (1315951197.513): [AUTH PLAIN Command - username: slusarz] S (1315951197.5319): +OK Logged in. C (1315951197.5325): STAT S (1315951197.5328): +OK 82 482351 C (1315951197.5348): UIDL S (1315951197.5354): +OK S (1315951197.5354): 1 000000014935d409 S (1315951197.5354): 2 000000024935d409 S (1315951197.5354): 3 000000114935d409 [...] S (1315951197.5363): 82 000000824935d409 S (1315951197.5363): . C (1315951197.9582): TOP 1 0 S (1315951198.0411): From user(a)domain.com Thu Jun 22 11:16:26 2006 [...] S (1315951198.0416): . [...] C (1315951199.0607): LIST S (1315951199.061): +OK 82 messages: S (1315951199.061): 1 118630 [...] S (1315951199.0619): . We need to grab all headers so we can build the envelope information (needed to produce the mailbox listing). And the LIST command grabs the size information (also used in the mailbox listing). But remember that the full headers will need to be redownloaded *EVERY* time you reload the page unless some sort of caching is enabled in the client. That's just the nature of POP3. (IMAP has the same sort of issues - if the stateless client does not cache, the envelope information must be downloaded on every access. However, with IMAP, the network traffic is reduced - you can download only the needed information, not all header text - and IMAP servers have the ability to cache this information behind the scenes due to the abstraction of the API.). This is where caching is pretty much essential on the webmail side. If caching is enabled, the best-case scenario is that the the webmail server only needs to grab the list of UIDLs on every POP3 server access going forward - if the UIDL list has not changed, we know the mailbox hasn't changed and the cached information is still valid. (CONDSTORE/QRESYNC extensions for IMAP make this synchronization check even more efficient in IMAP) michael

2 1

[Dovecot] General IMAP Question
by Gerald LaMontagne 14 Sep '11

14 Sep '11

Hi- I'm developing an IMAP client library in lua and tried using a literal form of the STATUS command. Dovecot rejected the command. I was successfully able to use a literal form of the LOGIN command, so I have some confidence in my code working properly. Is this correct and, if so, is there a list of IMAP commands that don't support the literal form? I searched hi and lo for something, but have been unable to find an answer. Thanks for your time. Regards- Gerry LaMontagne

2 1

[Dovecot] IMAP delete logs
by James isolder 14 Sep '11

14 Sep '11

Version - 1.2.17 Is there a way to include message or folder deletion logs in the dovecot log files. Thanks in advance. ____________________________________________________________ South Africas premier free email service - www.webmail.co.za For super low premiums, click here. http://www.dialdirect.co.za/?vdn=15828

2 1

[Dovecot] New plugin for Pigeonhole Sieve: sieve_pipe
by Stephan Bosch 14 Sep '11

14 Sep '11

Hello, I've finished up work on a new plugin for Pigeonhole Sieve: sieve_pipe. It adds a new Sieve extension (vnd.dovecot.pipe) providing a new action command that provides the possibility to pipe messages to external programs (e.g. shell scripts). The programs available to this command are explicitly limited and subject to administrator configuration. The plugin can currently only be downloaded from the Mercurial repository: http://hg.rename-it.nl/pigeonhole-0.2-sieve-pipe Check the README/INSTALL files in the repository or the new wiki page for more information: http://hg.rename-it.nl/pigeonhole-0.2-sieve-pipe/raw-file/tip/README http://hg.rename-it.nl/pigeonhole-0.2-sieve-pipe/raw-file/tip/INSTALL http://master.wiki2.dovecot.org/Pigeonhole/Sieve/Plugins/Pipe The specification of the vnd.dovecot.pipe extension can be found here: http://hg.rename-it.nl/pigeonhole-0.2-sieve-pipe/raw-file/tip/doc/rfc/spec-… I'd still call this thing very much experimental, so be sure to test it extensively first. Don't hesitate to notify me when there are any problems. Regards, Stephan.

1 0

Re: [Dovecot] Mails repopping
by Simon Brereton 13 Sep '11

13 Sep '11

> -----Original Message----- > From: dovecot-bounces(a)dovecot.org [mailto:dovecot- > bounces(a)dovecot.org] On Behalf Of Simon Brereton > > -----Original Message----- > > From: Timo Sirainen [mailto:tss@iki.fi] On Fri, 2011-09-09 at 13:07 > > -0400, Simon Brereton wrote: > > > > > I have a server that's been running Courier for about 6 years and > > in > > > all that time I think I've only ever had 1 issues where an entire > > mail > > > box was repopped by a webmail client. However, since moving to a > > new > > > server and dovecot 4 weeks ago, I've now had the webmail client > > repop > > > this account 4 times (there are about 230 mails in the account). > > > > > > Is there a setting I need to tighten to prevent/remedy this? I > > have > > > no idea if it's happening on other accounts, but this is one that > I > > > see. The format is maildir. There has been no changes to the > > webmail > > > client. > > > > dovecot -n output would have been nice. Also do you see anything in > > error logs? > > Ah. My apologies of course. Here it is.. > > mail:~# dovecot -n > # 1.2.15: /etc/dovecot/dovecot.conf > # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.2 ext3 > log_timestamp: %Y-%m-%d %H:%M:%S > protocols: imap imaps pop3 pop3s > ssl_ca_file: /etc/ssl/keys/rhodes-ca.crt > ssl_cert_file: /etc/ssl/keys/mail.domain.net.crt > ssl_key_file: /etc/ssl/private/mail.domain.net.key > disable_plaintext_auth: no > login_dir: /var/run/dovecot/login > login_executable(default): /usr/lib/dovecot/imap-login > login_executable(imap): /usr/lib/dovecot/imap-login > login_executable(pop3): /usr/lib/dovecot/pop3-login > mail_privileged_group: mailsystem > mail_location: maildir:/var/spool/mail/virtual/%d/%n > maildir_very_dirty_syncs: yes > mbox_write_locks: fcntl dotlock > mail_executable(default): /usr/lib/dovecot/imap > mail_executable(imap): /usr/lib/dovecot/imap > mail_executable(pop3): /usr/lib/dovecot/pop3 > mail_plugins(default): quota imap_quota > mail_plugins(imap): quota imap_quota > mail_plugins(pop3): quota > mail_plugin_dir(default): /usr/lib/dovecot/modules/imap > mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap > mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 > imap_client_workarounds(default): outlook-idle delay-newmail > imap_client_workarounds(imap): outlook-idle delay-newmail > imap_client_workarounds(pop3): > pop3_client_workarounds(default): > pop3_client_workarounds(imap): > pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh > lda: > postmaster_address: postmaster(a)domain.net > mail_plugins: quota > log_path: > info_log_path: > deliver_log_format: msgid=%m: %f: %$ > auth default: > mechanisms: plain login > user: mailsystem > verbose: yes > passdb: > driver: sql > args: /etc/dovecot/dovecot-sql.conf > userdb: > driver: prefetch > userdb: > driver: static > args: uid=999 gid=115 home=/var/spool/mail/virtual/%d/%n > allow_all_users=yes > socket: > type: listen > client: > path: /var/spool/postfix/private/auth > mode: 432 > user: postfix > group: mailsystem > master: > path: /var/run/dovecot/auth-master > mode: 432 > user: mailsystem > group: mailsystem > plugin: > quota: maildir > > Could you make dovecot -n munge the certificate and postmaster email > addresses? I'm not comfortable with that floating on the internet.. > > The only thing I have in the logs is 2 sessions where mail was popped > (note, it doesn't even add up to the 183 messages in the mail box). > But those sessions are vastly longer than the regular ones (tens of > minutes compared to a few seconds). Since both IPs are on the back- > bone, that's quite a while to download 100 mails (none of which are > over > > Sep 11 21:36:25 mail dovecot: pop3-login: Login: > user=<user(a)domain.com>, method=PLAIN, rip=64.88.168.84, > lip=83.170.65.xxx, TLS Sep 11 21:36:34 mail dovecot: > POP3(user(a)domain.com): Disconnected: Logged out top=0/0, retr=0/0, > del=0/183, size=14025971 Sep 11 21:43:44 mail dovecot: pop3-login: > Login: user=<user(a)domain.com>, method=PLAIN, rip=64.88.168.84, > lip=83.170.65.xxx, TLS Sep 11 21:44:54 mail dovecot: > POP3(user(a)domain.com): Disconnected: Logged out top=0/0, retr=0/0, > del=0/183, size=14025971 Sep 11 21:52:31 mail dovecot: pop3-login: > Login: user=<user(a)domain.com>, method=PLAIN, rip=64.88.168.84, > lip=83.170.65.xxx, TLS Sep 11 22:56:01 mail dovecot: > POP3(user(a)domain.com): Disconnected: Logged out top=0/0, > retr=100/9182678, del=0/183, size=14025971 Sep 11 23:08:58 mail > dovecot: pop3-login: Login: user=<user(a)domain.com>, method=PLAIN, > rip=64.88.168.84, lip=83.170.65.xxx, TLS Sep 11 23:37:57 mail > dovecot: POP3(user(a)domain.com): Disconnected: Logged out top=0/0, > retr=75/4748674, del=0/183, size=14025971 Sep 12 00:04:11 mail > dovecot: pop3-login: Login: user=<user(a)domain.com>, method=PLAIN, > rip=64.88.168.84, lip=83.170.65.xxx, TLS Sep 12 00:04:26 mail > dovecot: POP3(user(a)domain.com): Disconnected: Logged out top=0/0, > retr=0/0, del=0/183, size=14025971 Sep 12 00:07:40 mail dovecot: > pop3-login: Login: user=<user(a)domain.com>, method=PLAIN, > rip=64.88.168.84, lip=83.170.65.xxx, TLS Sep 12 00:07:53 mail > dovecot: POP3(user(a)domain.com): Disconnected: Logged out top=0/0, > retr=0/0, del=0/183, size=14025971 > > > > If you're using the default pop3_uidl_format it'll rely on IMAP > UIDs > > to stay the same, and I guess it's possible that due to some other > > problem they change (that should be logged as an error/warning > > though). > > > > You could try setting pop3_uidl_format=%f, but it will cause > everyone > > to redownload mails. With newer Dovecot versions you could set > > pop3_save_uidl=yes and when you think everyone's downloaded mails > once > > you can safely change the pop3_uidl_format. > > Sorry, I'm very new to dovecot and I'm not sure I understand. I > presume because neither of those keys are in the dovecot -n output > that they are as the defaults, yes? The account is indeed accessed > by IMAP as well (from a mobile device mostly), but I don't see > anything fishy there either. How could I see if the IMAP UIDs have > changed? > > Sep 11 21:20:32 mail dovecot: IMAP(user(a)domain.com): Connection > closed bytes=1095/8292 > > Sep 11 21:26:03 mail dovecot: imap-login: Login: > user=<user(a)domain.com>, method=PLAIN, rip=174.252.83.244, > lip=83.170.65.xxx, TLS Sep 11 22:11:20 mail dovecot: > IMAP(user(a)domain.com): Disconnected for inactivity bytes=725/5638 Sep > 11 22:17:10 mail dovecot: imap-login: Login: user=<user(a)domain.com>, > method=PLAIN, rip=174.252.83.244, lip=83.170.65.xxx, TLS Sep 11 > 23:12:06 mail dovecot: IMAP(user(a)domain.com): Disconnected for > inactivity bytes=1471/11025 Sep 11 23:23:22 mail dovecot: imap-login: > Login: user=<user(a)domain.com>, method=PLAIN, rip=174.252.83.244, > lip=83.170.65.xxx, TLS Sep 11 23:52:52 mail dovecot: > IMAP(user(a)domain.com): Connection closed bytes=1841/13679 Sep 12 > 00:08:47 mail dovecot: imap-login: Login: user=<user(a)domain.com>, > method=PLAIN, rip=174.252.83.244, lip=83.170.65.xxx, TLS Sep 12 > 01:19:05 mail dovecot: imap-login: Login: user=<user(a)domain.com>, > method=PLAIN, rip=174.252.83.244, lip=83.170.65.xxx, TLS Sep 12 > 02:57:01 mail dovecot: IMAP(user(a)domain.com): Connection closed > bytes=2713/60026 Sep 12 02:57:01 mail dovecot: IMAP(user(a)domain.com): > Connection closed bytes=2688/18635 > > > There are no errors or warnings in the mail log (I have one shared > log file for postfix, amavis and dovecot). Reading the notes for > pop3_save_uidl it doesn't seem to be a dangerous option - should I > turn that on? Why will it force everyone to redownload mails > (there's nothing about it on the wiki)? > > Thanks! > > Simon Any help would be appreciated. Thanks. Simon

1 0

[Dovecot] quota percents
by Micah Anderson 13 Sep '11

13 Sep '11

I've noticed that http://wiki2.dovecot.org/Quota/Configuration is out of date, it says: plugin { quota = maildir:User quota quota_rule = *:storage=1GB # 10% of 1GB = 100MB quota_rule2 = Trash:storage=10%% # 20% of 1GB = 200MB quota_rule3 = Spam:storage=20%% } but if you use the '10%%' notation, dovecot complains, and *also* incorrectly: dovecot: imap(test(a)example.net): Warning: quota root mail quota rule Trash:bytes=10%: obsolete configuration for rule 'bytes=10%' should be changed to 'bytes=+10%' its incorrect because if you change it to what it suggests ('+10%') it wont work because that wont be 10% more, rather, it is set to bytes=+10: dovecot: imap(test(a)example.net): Debug: Quota rule: root=mail quota mailbox=Trash bytes=+10 messages=0 clearly, that isn't right... so I guess it needs to be changed to '+10%%', setting that provides: dovecot: imap(test(a)example.net): Debug: Quota rule: root=mail quota mailbox=* bytes=2211724 messages=0 dovecot: imap(test(a)example.net): Debug: Quota rule: root=mail quota mailbox=Trash bytes=+221172 (10%) messages=0 that seems ok, its saying the Trash mailbox is set to have 221172bytes (215 kilobytes) of quota. So, clearly http://wiki2.dovecot.org/Quota/Configuration needs to be updated. However, it doesn't seem to work in practice, because I have a user that is at 99% of quota, with nothing in the Trash who cannot move a 77KB message into the Trash without getting the quota_exceeded message and refusing to move it. so... how do I get this to work? thanks! micah --

2 4

[Dovecot] any drawbacks with using Mailbox sharing with symlinks???
by Maciek Jackowski 13 Sep '11

13 Sep '11

are there any drawbacks with using Mailbox sharing with symlinks??? based on: http://wiki.dovecot.org/SharedMailboxes/Symlinks I got virtual users with same permission unix user/group and didnt noticed any drawbacks yet but i want to ask

1 0

[Dovecot] Migrating a dovecot setup from one server to another
by James Carr 13 Sep '11

13 Sep '11

Hi All, I have a server with a dovecot + postfix setup and unfortunately the server is EOL'd. I have built a new ubuntu server out and I'm in the process of migrating everything over. In migrating the dovecot setup over, this is the list of items I have done: install dovecot, postfix, etc on the new server copy configuration files over copy /var/spool and /var/mail over Is there anything else I need to consider before switching MX records to point to the new server? Thanks, James

1 0

[Dovecot] imapc and imap_acl
by Lutz Preßler 13 Sep '11

13 Sep '11

Hello (Timo), yes, I know... maybe it's a bit far fetched, but I do have a use case. Would it be (reasonably easily) possible to implement IMAP ACL support for "imported" imapc namespaces/mailboxes? There is no local directory (like with the virtual plugin) yet... Greetings, Lutz -- Lutz Preßler <Lutz.Pressler(a)SerNet.DE> http://www.SerNet.DE/ SerNet Service Network GmbH, Bahnhofsallee 1b, D-37081 Göttingen Tel.: +49-551-370000-2, FAX: +49-551-370000-9 AG Göttingen, HRB 2816, GF: Dr. Johannes Loxen

2 2

[Dovecot] Dovecot and Lustre FS
by Christian Gregoire 13 Sep '11

13 Sep '11

Hello, Right now, I'm using Exim and a customized version of an old (10 years old) Atmail POP3 server written in Perl, with ~10000 mailboxes located on a Lustre file system. So far so good. Though, I plan to migrate from Atmail to Dovecot, to provide our customers with IMAP support. Has anyone any experience with Dovecot on Lustre FS ? Thanks Christian

3 4

[Dovecot] Problem with configuring dovecot to take namespaces from database
by Marcin Mirosław 13 Sep '11

13 Sep '11

Hello! I'd like to set up dovecot to keep namespaces in database, keep more than one namespace per user. I try to create the simplest rule (even without tuple in db table) to get new namespace, unfortunately it doesn't work. My user_query is: SELECT '/dane/domeny/%d/mail/%n/' as home, dovecot_typ_skrzynki ||':'|| '/dane/domeny/%d/mail/%n/' ||'.'|| dovecot_typ_skrzynki as mail_location, '*:bytes='||quota_mb||'M' as quota_rule , 'test33/location=mdbox:~/.mdbox/test33/' as "namespace/test3/prefix" In debug log i'm getting: Debug: master out: USER#0111#011user@examle.com#011home=/dane/domeny/mejor.pl/mail/marcin/#011mail_location=maildir:/dane/domeny/mejor.pl/mail/marcin/.maildir#011quota_rule=*:bytes=0M#011namespace/test3/prefix=test33/location=mdbox:~/.mdbox/test33/ If i knew how it should look like the line in auth debug log for working configuration it could be easier for me to write correct sql query. May i please for advice?

2 12

[Dovecot] MySQL, map files
by Steve Fatula 13 Sep '11

13 Sep '11

I'll try and break up my questions the other day about extdata that went unanswered into pieces in the hopes it will be more specific and clear. In general, I am trying to figure out the syntax of the map statement and what is allowed in that statement. So, by map statement, I mean for example perhaps the dovecot-dict-expire.conf.ext file as shown in the doc. Is the syntax the same for the various types of files (quota vs expire)? Is there syntax to allow the specification of a different key? If so, where is this documented. I have an existing table I want to use, not the table shown in the doc. The reason I am asking is I have seen web pages that reference all sorts of statements within the map statement, and I have no idea where they are documented. Specifically, I see an example here (which is LDAP), look in section 3: http://dovecot.org/patches/1.2/ldap/HOWTO_dictldap+extdata.txt You will see lots of statements, not sure which ones can be used for MySQL (instead of LDAP). So, would like to find a list of ALL valid syntax within the map.

2 4

[Dovecot] 2.1: imapc SUBSCRIBE problem
by Lutz Preßler 13 Sep '11

13 Sep '11

On Fri, 09 Sep 2011, Lutz Preßler wrote: > LIST is now working correctly in my setup, but SUBSCRIBE ist not. > With subscriptions=no, as written (but same behaviour with subscriptions=yes), > SUBSCRIBE INBOX.gmail.INBOX (or others) yields > 0 NO [SERVERBUG] Internal error occurred. Refer to server log for more information. [2011-09-09 16:39:40] > logging (with mail_debug=yes) only > Sep 9 16:39:40 host dovecot: imap(1143, user): Error: stat((null)) failed: Bad address After putting (with subscriptions=no) an entry manually into the root subscriptions file, everything including UNSUBSCRIBE works fine. Lutz

2 5

Re: [Dovecot] director ignoring director_mail_servers for lmtp connections
by mailing lists 13 Sep '11

13 Sep '11

Hello, it works!! I was missing this line "auth_socket_path = director-userdb" Sep 13 10:26:12 imap1 dovecot: auth: Debug: master in: PASS 1 user001(a)example.com service=lmtp lip=100.180.245.101 lport=1024 8 Sep 13 10:26:12 imap1 dovecot: auth: Debug: static(user001(a)example.com,100.180.242.38): lookup Sep 13 10:26:12 imap1 dovecot: auth: Debug: password(user001(a)example.com,100.180.242.38): Credentials: Sep 13 10:26:12 imap1 dovecot: auth: Debug: master out: PASS 1 user=user001(a)example.com proxy port=24 Sep 13 10:26:12 imap1 dovecot: lmtp(29659): Debug: auth input: user=user001(a)example.com proxy port=24 host=100.180.245.101 proxy_refresh=450 Sep 13 10:26:12 imap1 dovecot: lmtp(29658): Debug: none: root=, index=, control=, inbox=, alt= Sep 13 10:26:12 imap1 dovecot: lmtp(29658): Connect from 100.180.245.101 full config for the archives: # dovecot -c /etc/dovecot-director/dovecot.conf -n # 2.0.14: /etc/dovecot-director/dovecot.conf # OS: Linux 2.6.34.7-0.7-xen x86_64 openSUSE 11.3 (x86_64) auth_debug = yes auth_debug_passwords = yes auth_verbose = yes auth_verbose_passwords = plain base_dir = /var/run/dovecot-director/ director_mail_servers = 100.180.245.101 director_servers = 100.180.245.101 disable_plaintext_auth = no lmtp_proxy = yes mail_debug = yes mail_fsync = always mail_gid = 5000 mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = acl mail_uid = 5000 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy ine mmap_disable = yes passdb { args = proxy=y nopassword=y driver = static } plugin { acl = vfile sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap lmtp service auth { unix_listener auth-userdb { group = vmail mode = 0666 user = vmail } } service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { port = 9090 } unix_listener director-userdb { mode = 0666 } unix_listener login/director { mode = 0666 } } service imap-login { executable = imap-login director inet_listener imap { port = 10143 } } service lmtp { inet_listener lmtp { port = 1024 } } ssl = no verbose_proctitle = yes protocol lmtp { auth_socket_path = director-userdb passdb { args = proxy=y nopassword=y port=24 driver = static } } protocol imap { mail_max_userip_connections = 100 }

1 0

[Dovecot] Quota fs (don't start script quota-warning.sh)
by Peter Ignatov 13 Sep '11

13 Sep '11

Hi, # doveadm -Dv quota get -u pit doveadm(pit): Debug: auth input: pit system_groups_user=pit uid=500 gid=500 home=/home/pit doveadm(pit): Debug: Effective uid=500, gid=500, home=/home/pit doveadm(pit): Debug: Quota root: name=INBOX backend=fs args=mount=/var/spool/mail doveadm(pit): Debug: Quota rule: root=INBOX mailbox=* bytes=19922944 messages=0 doveadm(pit): Debug: Quota warning: bytes=3984588 (20%) messages=0 reverse=no command=quota-warning 20 pit doveadm(pit): Debug: fs: root=/home/pit/mail, index=, control=, inbox=/var/spool/mail/pit doveadm(pit): Debug: fs quota add mailbox dir = /var/spool/mail doveadm(pit): Debug: fs quota block device = /dev/mapper/mpath1p1 doveadm(pit): Debug: fs quota mount point = /var/spool/mail doveadm(pit): Debug: fs quota mount type = ext2 Quota name Type Value Limit % INBOX STORAGE 4824 19456 24 But don't start script quota-warning.sh: #!/bin/sh PERCENT=$1 USER=$2 cat << EOF | /usr/libexec/dovecot/dovecot-lda -d $USER -o "plugin/quota=fs:INBOX:mount=/var/spool/mail:noenforcing" From: postmaster(a)domen.org Subject: quota warning Your mailbox is now $PERCENT% full. EOF #dovecot -n # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-274.3.1.el5.asp121 x86_64 Red Hat Enterprise Linux Server release 5.6 (Tikanga) disable_plaintext_auth = no listen = * log_path = /var/log/dovecot.log mail_debug = yes mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u mail_plugins = quota mail_privileged_group = mail mbox_write_locks = fcntl passdb { driver = pam } plugin { quota = fs:INBOX:mount=/var/spool/mail quota_rule = *:storage=19456 quota_warning = storage=20%% quota-warning 20 %u } protocols = pop3 service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { mode = 0666 } user = root } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } verbose_proctitle = yes protocol lda { mail_plugins = quota } protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota }

2 1

Re: [Dovecot] director ignoring director_mail_servers for lmtp connections
by mailing lists 13 Sep '11

13 Sep '11

On 09/13/2011 08:34 AM, Jan-Frode Myklebust wrote: > On Mon, Sep 12, 2011 at 04:55:51PM +0100, mailing lists wrote: >> >> director_mail_servers = 101.180.245.101 >> director_servers = 101.180.245.101 it works with imap connections, so I assumed it also would do it for lmtp. Sep 13 09:04:03 imap1 dovecot: imap-login: proxy(user001): started proxying to 10.180.245.101:143: user=<user001>, method=PLAIN, rip=::1, lip=: :1, secured > Is this a loop maybe? director_mail_servers should list all > your backend dovecot servers, space separated. Here's mine: > > director_mail_servers = 192.168.42.7 192.168.42.8 192.168.42.9 192.168.42.10 192.168.42.11 192.168.42.28 192.168.42.29 using only one director and backend would be fine for tests purposes (as it was with imap and not loops were formed) What I don't understand is why director insists in providing a proxy host from passdb when all it needs to do is pick the ones in director_mail_servers ¿? Sep 12 17:14:13 imap1 dovecot: lmtp(25682): Error: proxy: host not given please could you post you lmtp configuration??

1 0

[Dovecot] director ignoring director_mail_servers for lmtp connections
by mailing lists 13 Sep '11

13 Sep '11

Hello, Following Jan-Frode's advise I am trying this configuration: {postfix} ---lmtp---> {director} ---lmtp---> {dovecot} so I have two dovecot instances for director/proxy and lmtp delivery on ports 1024 and 24 respectively. whilst for imap connections I can specify a pool of imap backend servers via 'director_mail_servers' it seems is not possible with lmtp. Sep 12 17:14:13 imap1 dovecot: auth: Debug: master in: PASS 1 user001(a)example.com service=lmtp lip=::1 lport=1024 rip=::1 rpor5 Sep 12 17:14:13 imap1 dovecot: auth: Debug: static(user001@example.com,::1): lookup Sep 12 17:14:13 imap1 dovecot: auth: Debug: password(user001@eexample.com,::1): Credentials: Sep 12 17:14:13 imap1 dovecot: auth: Debug: master out: PASS 1 user=user001(a)example.com proxy port=24 Sep 12 17:14:13 imap1 dovecot: lmtp(25682): Debug: auth input: user=user001(a)example.com proxy port=24 Sep 12 17:14:13 imap1 dovecot: lmtp(25682): Error: proxy: host not given Sep 12 17:14:13 imap1 dovecot: lmtp(25682): Debug: Loading modules from directory: /usr/lib64/dovecot/modules Sep 12 17:14:13 imap1 dovecot: lmtp(25682): Debug: Module loaded: /usr/lib64/dovecot/modules/lib01_acl_plugin.so Sep 12 17:14:13 imap1 dovecot: auth: Debug: master in: USER 2 user001(a)example.com service=lmtp lip=::1 rip=::1 Sep 12 17:14:13 imap1 dovecot: auth: Debug: static(user001@example.com,::1): lookup Sep 12 17:14:13 imap1 dovecot: auth: Debug: password(user001@example.com,::1): Credentials: Sep 12 17:14:13 imap1 dovecot: auth: Debug: master out: USER 2 user001(a)example.com Sep 12 17:14:13 imap1 dovecot: lmtp(25682): Debug: auth input: user001(a)example.com Sep 12 17:14:43 imap1 dovecot: lmtp(25682): Disconnect from ::1: Client quit (in RCPT TO) how I can redirect incoming lmtp request to backend lmtp servers (and not just one)? what I'm missing here? /----------/ # dovecot -c /etc/dovecot-director/dovecot.conf -n # 2.0.14: /etc/dovecot-director/dovecot.conf # OS: Linux 2.6.34.7-0.7-xen x86_64 openSUSE 11.3 (x86_64) auth_debug = yes auth_debug_passwords = yes auth_verbose = yes auth_verbose_passwords = plain base_dir = /var/run/dovecot-director/ director_mail_servers = 101.180.245.101 director_servers = 101.180.245.101 disable_plaintext_auth = no lmtp_proxy = yes mail_debug = yes mail_fsync = always mail_gid = 5000 mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = acl mail_uid = 5000 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mmap_disable = yes passdb { args = proxy=y nopassword=y driver = static } plugin { acl = vfile sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap lmtp service auth { unix_listener auth-userdb { group = vmail mode = 0666 user = vmail } } service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { port = 9090 } unix_listener director-userdb { mode = 0666 } unix_listener login/director { mode = 0666 } } service imap-login { executable = imap-login director inet_listener imap { port = 10143 } } service lmtp { inet_listener lmtp { port = 1024 } } ssl = no verbose_proctitle = yes protocol lmtp { passdb { args = proxy=y nopassword=y port=24 driver = static } } protocol imap { mail_max_userip_connections = 100 }

2 1

[Dovecot] signal 11 crash, sometimes, during mbox bz2 decompression
by Mike Brown 13 Sep '11

13 Sep '11

Hello again, I'm running dovecot 1.2.16 from the ports collection on FreeBSD 8.1-STABLE, amd64. To enable IMAP read-only access to gzip or bzip2 compressed mbox files, I added the following to my dovecot.conf, in the protocol imap { ... } section: mail_plugins = zlib My compressed mbox files are all .bz2 files in an 'old' subdirectory of my main mail directory. I am trying to access them with Thunderbird. I 'subscribed' to them just fine, and at first I thought it was working, but I just got lucky on the first couple I accessed. Dovecot actually fails to decompress them about 90% of the time, seemingly at random; the same box will not work a bunch of times, then work once, then not work again and again. When it works, sometimes only some of the messages get transmitted. Most of the failures are accompanied by this pair of messages in my log: Aug 16 00:25:33 myhost dovecot: dovecot: child 943 (imap) killed with signal 11 (core not dumped - set mail_drop_priv_before_exec=yes) Aug 16 00:25:33 myhost kernel: pid 943 (imap), uid 1001: exited on signal 11 Some of the failures have only the "exited on signal 11" message. The very first failure had this: Aug 16 00:22:47 myhost dovecot: IMAP(mike): Next message unexpectedly lost from mbox file (read-only mbox stream) at 2761 (cached) Aug 16 00:22:47 myhost dovecot: IMAP(mike): read(mail, uid=2) failed: Invalid argument Is this a problem with dovecot? Let me know if/how I can help, or what other info you need. Thanks, Mike

2 4

[Dovecot] two little fixes for 2.0.14
by Mike Abbott 13 Sep '11

13 Sep '11

--- a/dovecot/src/lib-index/mail-index-view.c +++ b/dovecot/src/lib-index/mail-index-view.c @@ -9,7 +9,7 @@ void mail_index_view_clone(struct mail_index_view *dest, const struct mail_index_view *src) { - memset(dest, 0, sizeof(dest)); + memset(dest, 0, sizeof(*dest)); dest->refcount = 1; dest->v = src->v; dest->index = src->index; --- a/dovecot/src/lib-storage/mail-storage-service.c +++ b/dovecot/src/lib-storage/mail-storage-service.c @@ -870,7 +870,7 @@ } user = p_new(user_pool, struct mail_storage_service_user, 1); - memset(user_r, 0, sizeof(user_r)); + memset(user_r, 0, sizeof(*user_r)); user->pool = user_pool; user->input = *input; user->input.userdb_fields = NULL;

2 1

[Dovecot] Custom error messages.
by Lauro C. 12 Sep '11

12 Sep '11

I am using Dovecot 1.2.9. Is it possible to have custom error messages? I want to translate some of the messages (for instance mailbox full), so it can be more user friendly. I already use the quota warning feature. But I need to translate the messages anyways, is it possible? Lauro

2 1

[Dovecot] Possible to Customize File Naming Scheme?
by Dave Stubbs 12 Sep '11

12 Sep '11

Hello all, [Sorry if this has been covered already - I searched back a little way in the archive and didn't find anything recent on the topic.] I'm wondering if it is possible to customize the way dovecot creates or modifies filenames in the maildir directories? I'm watching how my mail system works, and I see that procmail creates a new file in the <folder>/new directory, each time an email is received. This file is some complex combination of UIDs and things, suffixed by the server name. So far, the filename has alphanumerics, a couple underscores, and a dot or two only. But once dovecot gets it's hands on the file and moves it to the <folder>/cur directory, it starts doing "terrible" things to the file name. Now, the filename starts to have "evil" things in it, like colons and commas. Is there a way to change this? I'm asking this primarily because I use dovecot as a massive long-term email archiving system. One of the things one needs to be able to do when running a long-term archive like this is keep things as simple and accessible as possible. The reason I use maildir is that I totally buy into the "one email, one file" idea - it means I don't have to store messages in big consolidated database files that are changeable with each new version of the vendor's software release (such as exchange DBs or Outlook PST files) or that are horrible performers (such as mbox). One of the nice things about the maildir "each email is a separate file" idea is that you are not limited to maildir or dovecot or any other piece of software to handle, read, and process the files. For instance, I would like to backup my maildir by using rsync to synchronize my dovecot-managed maildir to a Windows server running NFS. From there the files are synchronized via Windows DFS ( to which there is no open source solution that is even close) to several other servers around the continent. Only thing: The evil commas and colons in the filenames are anathema to Windows. So instead I tar the maildir folders to tgz files on the windows server, and the tgz's are synchronized to other DR sites. If I could do without the need for tar (mandated solely because of the colons and commas in the dovecot filename scheme) I could minimize the time to backup (only synchronizing changes) and suddenly I would have a lot of other benefits opened up. One simple one would be that if I could configure dovecot to append the .eml extension to the end of every file (technically each file in a maildir is an eml file regardless of the extension being present or not - eml is just a raw mail file just like what you'd find in a maildir) I would have instant access to them using Search Server Express, which can read eml files but strongly prefers to use extentions to recognize files as such. To be clear: I'm not requesting that dovecot's file naming convention be changed to match my quirky requirements - I'm just asking if it could be made configurable, so I could change it to match my needs and others could change it to match theirs. In the interests of REALLY being able to use the elegantly simple idea of each mail being a separate file, I'm trying to get more out of that great pile of folders and files I'm amassing in my mail archive server. The more use I can make of them with other software other than dovecot (i.e. data crawling, indexing, easy recovery in a catastrophe, etc) the more valuable this format is. Is this possible?

3 4

[Dovecot] How to get rid of sub-folders ?
by Spyros Tsiolis 12 Sep '11

12 Sep '11

Hello, OK, no answers on my previous e-mail. I'll rephrase it. How can I get rid of subfolders on a users' tree-like structure on dovecot ? Which file must I "touch" ? TIA, s. ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis

2 2

[Dovecot] userdb static & Quota from LDAP?
by Christian Schmidt 12 Sep '11

12 Sep '11

Hi all, I just configured Dovecot 2.0.14 for "virtual" (i.e. non-system-) users: passdb { driver = ldap args = /etc/dovecot/conf.d/ldap-passdb.ext } userdb { driver = static args = uid=vmail gid=vmail home=/var/maildir/%u } Works fine so far - thanks for this great piece of software, Timo!!! Now I'd like to add per-user quotas that will also be stored in the LDAP directory, and I'm not sure how to put things together. IMHO quota is the only "userdb information" requested from LDAP, and I'd like to leave all the other "userdb pieces" as the are. I changed the userdb definition to: userdb { driver = ldap args = /etc/dovecot/conf.d/ldap-userdb.ext } My /etc/dovecot/conf.d/ldap-userdb.ext contains (along other lines): user_attrs = uid=vmail,gid=vmail,home=/var/maildir/%u,mailQuota=quota=quota_rule=*:storage=%$ My quota configuration looks like this: plugin { quota = maildir:Mailbox-Quota quota_rule = *:storage=1G quota_warning = storage=80%% /usr/local/bin/quotawarn.sh 80 %u quota_warning2 = storage=95%% /usr/local/bin/quotawarn.sh 95 %u } Using this setup, "doveadm quota get -u username" doesn't reveal any quota information (except from the "headings"). Instead, dovecot logs: doveadm(username): Fatal: GID 0 isn't permitted When switching back to userdb static, I receive the correct (but also) static quota information. What am I doing wrong? Thank you very much, Christian Schmidt -- question = ( to ) ? be : ! be; -- Wm. Shakespeare

3 2

[Dovecot] Attacking Dovecot
by Nikos Papadopoulos 12 Sep '11

12 Sep '11

Hello, I am using Dovecot ver.1.0.7 on an x86 server with RedHat Linux Enterprise 5 and the following configuration: # 1.0.7: /etc/dovecot.conf protocols: pop3 login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/pop3-login mail_location: mbox:~/mail:INBOX=/var/mail/%u mail_executable: /usr/libexec/dovecot/pop3 mail_plugin_dir: /usr/lib/dovecot/pop3 pop3_client_workarounds: outlook-no-nuls oe-ns-eoh auth default: passdb: driver: pam userdb: driver: passwd It seems that my mail server is being attacked by someone who tries to retrieve users' credentials. Please read below an output of logwatch. dovecot-auth: pam_succeed_if(dovecot:auth): error retrieving information about user sandra dovecot-auth: pam_succeed_if(dovecot:auth): error retrieving information about user tanya dovecot-auth: pam_succeed_if(dovecot:auth): error retrieving information about user tanya dovecot-auth: pam_succeed_if(dovecot:auth): error retrieving information about user dark dovecot-auth: pam_succeed_if(dovecot:auth): error retrieving information about user dark dovecot-auth: pam_succeed_if(dovecot:auth): error retrieving information about user gibson dovecot-auth: pam_succeed_if(dovecot:auth): error retrieving information about user frank dovecot-auth: pam_succeed_if(dovecot:auth): error retrieving information about user frank Besides, some of the local users receive "spam" emails, which seem to be sent by another local user. Please assist me on how to prevent the aforementioned attack. Best Regards, Nikos

3 2

[Dovecot] dovecot 2.0.12: mdbox & quota=dirsize
by Роман Захров 12 Sep '11

12 Sep '11

#doveconf -v ...................... quota = dirsize:User quota quota_debug = yes quota_exceeded_message = message quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u ............................ # du --max-depth=1 -h 311M ./storage 20K ./sieve 7,8M ./mailboxes 319M . # doveadm quota get -u myuser Quota name Type Value Limit % User quota STORAGE 7948 399360 2 # then i change ./dovecot-2.0.12/src/plugins/quota/quota-dirsize.c 165-- </span>path = mailbox_list_get_path(namespaces[i]->list, NULL, 166-- MAILBOX_LIST_PATH_TYPE_MAILBOX); 165++ </span>path = mailbox_list_get_path(namespaces[i]->list, NULL, 166++ MAILBOX_LIST_PATH_TYPE_DIR); # doveadm quota get -u myuser Quota name Type Value Limit % User quota STORAGE 325885 399360 81 #

3 2

Re: [Dovecot] Mails repopping
by Simon Brereton 12 Sep '11

12 Sep '11

> -----Original Message----- > From: dovecot-bounces(a)dovecot.org [mailto:dovecot- > bounces(a)dovecot.org] On Behalf Of Simon Brereton > > -----Original Message----- > > From: Timo Sirainen [mailto:tss@iki.fi] On Fri, 2011-09-09 at 13:07 > > -0400, Simon Brereton wrote: > > > > > I have a server that's been running Courier for about 6 years and > > in > > > all that time I think I've only ever had 1 issues where an entire > > mail > > > box was repopped by a webmail client. However, since moving to a > > new > > > server and dovecot 4 weeks ago, I've now had the webmail client > > repop > > > this account 4 times (there are about 230 mails in the account). > > > > > > Is there a setting I need to tighten to prevent/remedy this? I > > have > > > no idea if it's happening on other accounts, but this is one that > I > > > see. The format is maildir. There has been no changes to the > > webmail > > > client. > > > > dovecot -n output would have been nice. Also do you see anything in > > error logs? > > Ah. My apologies of course. Here it is.. > > mail:~# dovecot -n > # 1.2.15: /etc/dovecot/dovecot.conf > # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.2 ext3 I've only just noticed that installing from apt-get on Debian 64-bit installs Dovecot 1.2 - does anyone know when 2.x will be available via apt? Simon

1 0

Re: [Dovecot] Mails repopping
by Timo Sirainen 12 Sep '11

12 Sep '11

On Fri, 2011-09-09 at 13:07 -0400, Simon Brereton wrote: > I have a server that's been running Courier for about 6 years and in > all that time I think I've only ever had 1 issues where an entire mail > box was repopped by a webmail client. However, since moving to a new > server and dovecot 4 weeks ago, I've now had the webmail client repop > this account 4 times (there are about 230 mails in the account). > > Is there a setting I need to tighten to prevent/remedy this? I have > no idea if it's happening on other accounts, but this is one that I > see. The format is maildir. There has been no changes to the webmail > client. dovecot -n output would have been nice. Also do you see anything in error logs? If you're using the default pop3_uidl_format it'll rely on IMAP UIDs to stay the same, and I guess it's possible that due to some other problem they change (that should be logged as an error/warning though). You could try setting pop3_uidl_format=%f, but it will cause everyone to redownload mails. With newer Dovecot versions you could set pop3_save_uidl=yes and when you think everyone's downloaded mails once you can safely change the pop3_uidl_format.

2 1

[Dovecot] Dsync and hidden files
by Dick Middleton 12 Sep '11

12 Sep '11

Hi, I'm in the process of changing from Dovecot v1 to v2 and changing to mdbox in the process. I've come across a little problem which I was hoping there would be a workaround for. There are sieve config files in the home directories which are hidden files. Dsync croaks when it finds one of these because they are not mbox format. It would be nice if they were ignored (or copied unchanged). Is there another way to deal with them other than by deleting thm? Dick

2 2

[Dovecot] problem migrating from maildir to dbox
by Ramón Frontera 12 Sep '11

12 Sep '11

Hello, we want to migrate Mail folders from Maildir to dbox without downtime. We change the mail_location to dbox in 10-mail.conf and restart dovecot. After that we use dsync -u user mirror maildir:~/Maildir. The problem is that if INBOX exists the dsync create a new folder with name like b5893c0a93ff694e551200002dfa3112 Can I migrate to the existing INBOX? or How can I merge the 2 INBOX folders? Thanks for your help! Regards, -- Ramon

3 7

[Dovecot] general advice sought
by Alan Brown 12 Sep '11

12 Sep '11

I'd like to hear the thoughts of list members on which type of storage method seems "best" for inboxes and for folders. The filesystem is GFS2 and for various reasons I can't change it. Inboxes - currently Mbox format. Some users have upwards of 5000 messages in there (the largest is about 18k entries) and thanks to attachments some inboxes are 40-200Mb with a few sitting at 2-3Gb. (Suicidal, I know but enforcing rules is politik-laden and getting academics to behave sensibly is like herding cats) Folders: Mdir format. Thanks to GFS2 filesystem limitations(*) I'm currently enforcing a limit of 4000 messages/folder. It'd be nice to have a "better" way of storing these which doesn't drive up backup loads tremendously. The mail spool has around 6 million files in the folders, covering about 400Gb. GFS2 filesystem limitations are painful. While there are no hard limits, It really doesn't cope well with a lot of files in any given directory thanks to limitations in the way that cluster locking is propagated, There are marked slowdowns about 100 files, this becomes awful above 1000 and effectively unusable above about 8000 entries as the entire IO system gets halted momentarily when such directories are opened and the directory may take up to 5 minutes to return a "ls" result. Some users had upwards of 80k files in their mail folders (~40k messages) and accessing these brought the entire system to a halt. If I migrate to other formats (eg mdbox), then it needs to be able to be done on the fly. (Taking the mailservers down for a day won't go down well, even an hour raises howls). Any suggestions?

2 1

[Dovecot] 2.1: imapc LIST problem / usage question
by Lutz Preßler 12 Sep '11

12 Sep '11

----- Forwarded message from SerNet Support Lutz Preßler <support(a)SerNet.DE> ----- From: SerNet Support Lutz Preßler <support(a)SerNet.DE> Subject: 2.1: imapc LIST problem / usage question To: dovecot(a)dovecot.org Date: Fri, 9 Sep 2011 12:00:46 +0200 Organization: SerNet Service Network GmbH Hello, 2.1.alpha1 (latest Debian auto build on amd64) As a test, namespace for gmail integration set up by userdb with userdb_namespace=gmail userdb_namespace/gmail/list=yes userdb_namespace/gmail/subscriptions=no userdb_namespace/gmail/separator=. userdb_namespace/gmail/prefix=INBOX.gmail. userdb_namespace/gmail/location=imapc: userdb_imapc_host=imap.gmail.com userdb_imapc_user=ixxxxx(a)gmail.com userdb_imapc_password=xxxxx userdb_imapc_ssl=imaps userdb_imapc_ssl_ca_dir=/etc/ssl/certs userdb_imapc_port=993 (but having the namespace set up in config file makes no difference). This works in principle. I can e.g. 0 select "INBOX.gmail.[Gmail].Alle Nachrichten" * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 31 EXISTS * 0 RECENT * OK [UNSEEN 1] First unseen. * OK [UIDVALIDITY 1] UIDs valid * OK [UIDNEXT 19689] Predicted next UID * OK [NOMODSEQ] No permanent modsequences 0 OK [READ-WRITE] Select completed. and even use the gmail mailboxes within dovecot-virtual files! But: LIST seems broken: 0 list "" "*" * LIST (\HasChildren) "." "INBOX" * LIST (\HasNoChildren) "." "INBOX.privat" * LIST (\HasChildren) "." "INBOX.test" * LIST (\HasNoChildren) "." "INBOX.test.test2" * LIST (\HasNoChildren) "." "INBOX.Trash" * LIST (\HasNoChildren) "." "INBOX.in2009" [...] * LIST (\Noselect \HasChildren) "." "INBOX.gmail" * LIST (\HasNoChildren) "." "Arbeit" * LIST (\HasNoChildren) "." "Belege" * LIST (\HasNoChildren) "." "Privat" * LIST (\HasNoChildren) "." "Reisen" * LIST (\Noselect \HasNoChildren) "." "[Gmail]" * LIST (\HasNoChildren) "." "[Gmail]/Alle Nachrichten" * LIST (\HasNoChildren) "." "[Gmail]/Entw&-APw-rfe" * LIST (\HasNoChildren) "." "[Gmail]/Gesendet" * LIST (\HasNoChildren) "." "[Gmail]/Markiert" * LIST (\HasNoChildren) "." "[Gmail]/Papierkorb" * LIST (\HasNoChildren) "." "[Gmail]/Spam" * LIST (\HasNoChildren) "." "[Gmail]/Wichtig" * LIST (\HasChildren) "." "INBOX.virtual" * LIST (\HasNoChildren) "." "INBOX.virtual.week" * LIST (\HasNoChildren) "." "INBOX.virtual.sent" * LIST (\HasNoChildren) "." "INBOX.virtual.allin" 0 OK List completed. For the Gmail mailboxe the INBOX.gmail prefix is missing and / is used as separator. Second question: Is there a way to include multiple imapc instances/ namespaces with e.g. different destinations servers? I don't see how because imapc_* parameters seem to be global (now), but it would be a very useful feature. Greetings, Lutz

2 5

[Dovecot] Read-only mbox files
by Tim Bishop 12 Sep '11

12 Sep '11

Hi all, I'm using Dovecot 1.2.16 (I can upgrade to 2.0 if need be) and I'm having trouble stopping Dovecot from modifying mbox files. The setup is that my main namespace points at my Maildir mail folders. In addition to this I have a second namespace that points at some old archived mbox folders. I rarely need to access these folders, but when I do Dovecot modifies the files (adding UID headers, etc). What I'd like to do is make it so that Dovecot can't change these files. I thought there might be a setting to mark a mail_location as read-only, but I can't find anything like that. I've looked at ACLs too, but they seem to be more about user access that what Dovecot can do to files. I could just do this at the filesystem level, but I'd feel a bit happier about working with Dovecot rather than trying to work around it. Does anyone have any suggestions? Thank you for reading. Tim. -- Tim Bishop http://www.bishnet.net/tim/ PGP Key: 0x5AE7D984

2 1

[Dovecot] setacl on complete mailbox
by Tobias Hachmer 12 Sep '11

12 Sep '11

Hi List, how can I grant a user full control on another mailbox (the complete mailbox with all folder and subfolders). With the setacl command I could do this but first I have to list all folders and then I have to do one setacl command for each folder. Is there a command to this in one line? Also for new created folders? Greetz, Tobias

2 1

[Dovecot] NO Unknown subscription namespace.
by mailing lists 12 Sep '11

12 Sep '11

Hello, what this message means? "NO Unknown subscription namespace." the shared namespace is visible and I can fetch messages from it, but subscription fails with the above message. (user002 is sharing the folder named docs-users002 with user user001) # telnet localhost 143 Trying ::1... Connected to localhost. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. . login user001 secret . OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS ACL RIGHTS=texk] Logged in . list "shared." "*" * LIST (\Noselect \HasChildren) "." "shared.user002" . OK List completed. . list "shared.user002." "*" * LIST (\HasNoChildren) "." "shared.user002.docs-user002" . OK List completed. . list "shared.user002.docs-user002." "*" . OK List completed. . select "shared.user002.docs-user002" * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft)] Flags permitted. * 2 EXISTS * 0 RECENT * OK [UIDVALIDITY 1315765265] UIDs valid * OK [UIDNEXT 3] Predicted next UID * OK [HIGHESTMODSEQ 3] Highest . OK [READ-WRITE] Select completed. . fetch 1 all * 1 FETCH (FLAGS (\Seen) INTERNALDATE "24-Nov-2009 11:58:34 +0100" RFC822.SIZE 3734 ENVELOPE ("Tue, 24 Nov 2009 07:58:34 -0400 (AST)" "Thank you for registering for the Red Hat Virtual Experience" (("support(a)virtualevents365.com" NIL "support" "virtualevents365.com")) (("support(a)virtualevents365.com" NIL "support" "virtualevents365.com")) (("support(a)virtualevents365.com" NIL "support" "virtualevents365.com")) (("damocles-(a)hotmail.com" NIL "damocles-" "hotmail.com")) NIL NIL NIL "<6955854.2731259063914762.JavaMail.root(a)app130.vs.int.cgsinc.ca>")) . OK Fetch completed. . subscribe "shared.user002.docs-user002" . NO Unknown subscription namespace. . logout * BYE Logging out . OK Logout completed. Connection closed by foreign host. /----------------/ namespace { inbox = yes location = prefix = INBOX. separator = . subscriptions = yes } namespace { list = yes location = maildir:/var/virtual-maildir/%%n prefix = shared.%%n. separator = . subscriptions = no type = shared }

2 1

[Dovecot] Quota fs (ignore mount)
by Peter Ignatov 12 Sep '11

12 Sep '11

>> Well .. I'm not entirely sure if the current behavior is good or not, but what you need to do to get it working is to add two quota roots. One for /home/pit/mail (i.e. without specifying mount=) and another for the INBOX's /var/spool/mail. > Don't work... :-( After I installed version 2.0.13 - mount is correct: # doveadm -Dv quota get -u pit doveadm(pit): Debug: auth input: pit system_groups_user=pit uid=500 gid=500 home=/home/pit doveadm(pit): Debug: Effective uid=500, gid=500, home=/home/pit doveadm(pit): Debug: Quota root: name=INBOX backend=fs args=mount=/var/spool/mail doveadm(pit): Debug: Quota rule: root=INBOX mailbox=* bytes=19922944 messages=0 doveadm(pit): Debug: Quota warning: bytes=3984588 (20%) messages=0 reverse=no command=quota-warning 20 pit doveadm(pit): Debug: fs: root=/home/pit/mail, index=, control=, inbox=/var/spool/mail/pit doveadm(pit): Debug: fs quota add mailbox dir = /var/spool/mail doveadm(pit): Debug: fs quota block device = /dev/mapper/mpath1p1 doveadm(pit): Debug: fs quota mount point = /var/spool/mail doveadm(pit): Debug: fs quota mount type = ext2 Quota name Type Value Limit % INBOX STORAGE 4824 19456 24 But now don't work script quota-warning.sh: #!/bin/sh PERCENT=$1 USER=$2 cat << EOF | /usr/libexec/dovecot/dovecot-lda -d $USER -o "plugin/quota=fs:INBOX:mount=/var/spool/mail:noenforcing" From: postmaster(a)domen.org Subject: quota warning Your mailbox is now $PERCENT% full. EOF #dovecot -n # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-274.3.1.el5.asp121 x86_64 Red Hat Enterprise Linux Server release 5.6 (Tikanga) disable_plaintext_auth = no listen = * log_path = /var/log/dovecot.log mail_debug = yes mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u mail_plugins = quota mail_privileged_group = mail mbox_write_locks = fcntl passdb { driver = pam } plugin { quota = fs:INBOX:mount=/var/spool/mail quota_rule = *:storage=19456 quota_warning = storage=20%% quota-warning 20 %u } protocols = pop3 service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { mode = 0666 } user = root } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } verbose_proctitle = yes protocol lda { mail_plugins = quota } protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota }

1 0

[Dovecot] Sieve envelope :detail "to" "xxx" does not deliver to fileinto destination
by Aleksandar Lazic 11 Sep '11

11 Sep '11

Dear Listmember. I try to migrate from my current courier-mta setup fo postfix dovecot setup. I use the following scirpt to filter to the destination mailbox. ### /var/vmail/none.at/al/sieve/lists.sieve require ["fileinto", "subaddress", "envelope" ]; if envelope :detail "to" "pdnsusers" { fileinto "Lists.pdnsusers"; } ### postfix/master ### dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop} -a ${original_recipient} # flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${user}@${nexthop} -m ${extension} -a ${original_recipient} ### Log ### Sep 11 21:47:48 lvps46-163-74-15 postfix/smtpd[7788]: connect from Sep 11 21:48:12 lvps46-163-74-15 postfix/smtpd[7788]: 495EF9FECAF9: Sep 11 21:48:27 lvps46-163-74-15 postfix/cleanup[7795]: 495EF9FECAF9: message-id=<> Sep 11 21:48:27 lvps46-163-74-15 postfix/qmgr[7785]: 495EF9FECAF9: from=<al(a)bitrace.net>, size=268, nrcpt=1 (queue active) Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda: Debug: Loading modules from directory: /usr/lib/dovecot/modules Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda: Debug: Module loaded: /usr/lib/dovecot/modules/lib90_sieve_plugin.so Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda: Debug: auth input: al(a)none.at uid=5000 gid=5000 home=/var/vmail/none.at/al Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: Effective uid=5000, gid=5000, home=/var/vmail/none.at/al Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: maildir: root exists (/var/vmail/none.at/al/Maildir) Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: maildir++: root=/var/vmail/none.at/al/Maildir, index=, control=, inbox=/var/vmail/none.at/al/Maildir, alt= Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: none: root=, index=, control=, inbox=, alt= Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: Destination address: al-pdnsuser(a)none.at (source: -a parameter) Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: sieve: using sieve path for user's script: /var/vmail/none.at/al/.dovecot.sieve Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: sieve: opening script /var/vmail/none.at/al/.dovecot.sieve Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: sieve: script binary /var/vmail/none.at/al/.dovecot.svbin successfully loaded Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: sieve: binary save: not saving binary /var/vmail/none.at/al/.dovecot.svbin, because it is already stored Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): Debug: sieve: executing script from /var/vmail/none.at/al/.dovecot.svbin Sep 11 21:48:27 lvps46-163-74-15 dovecot: lda(al(a)none.at): sieve: msgid=unspecified: stored mail into mailbox 'INBOX' Sep 11 21:48:27 lvps46-163-74-15 postfix/pipe[7797]: 495EF9FECAF9: to=<al-pdnsuser(a)none.at>, relay=dovecot, delay=28, delays=28/0.02/0/0.22, dsn=2.0.0, status=sent (delivered via dovecot service) Sep 11 21:48:27 lvps46-163-74-15 postfix/qmgr[7785]: 495EF9FECAF9: removed Sep 11 21:48:28 lvps46-163-74-15 postfix/smtpd[7788]: disconnect from xxx ### dovecot -n => attachment dovecot_-n Due to the fact that I'am new to dovecot and sieve I hope anybody can help the solve this issue. My target is to filter the mailinglists based on address extention or is it better to filter on to header? Is there a 'log' or 'print' command in the sieve filter or how can I write a message to the log file? Many thanks for your help BR Aleks

1 0

[Dovecot] Filter Mail to Pipe to External Program
by Andriy Moraru 11 Sep '11

11 Sep '11

Hello all! How do I add a filter that would pipe the mail message (containing a certain "To:" field) to some other program? I am running Dovecot 1.0.15. Thanks!

2 1

[Dovecot] sieve and pattern matching
by David Newman 11 Sep '11

11 Sep '11

Dovecot 1.2.17 What is the sieve syntax for matching text somewhere in a subject line, but not at the beginning of the line? Background: Multiple machines each send a message with the subject of "<hostname> operations run" to a mail server. The <hostname> value is different for each sender. This sieve filter does not match any message: require ["fileinto","envelope","reject","vacation","imapflags","relational","co mparator-i;ascii-numeric","regex","notify"]; require ["body", "fileinto", "regex"]; # currentops reports if header :contains "Subject" ".* operations run" { fileinto "currentops"; stop; } However, a similar filter will match if, and only if, the string occurs at the beginning of the subject line. The various sieve help pages I've found suggest that pattern matching anywhere in the subject line should work, not just at the beginning. How to achieve this? TIA dn

2 2

[Dovecot] Annoying "feature" in dovecot/pidgeonhole - include depth limitation
by Mihai Moldovan 11 Sep '11

11 Sep '11

Hi all, I'm using dovecot 2.0.14 build on Debian. The maintainers obviously patch the dovecot source so that it uses the pidgeonhole sieve system. Today I ran into a very annoying issue: I created several sieve scripts and interlinked via the include command, only to find dovecot spewing this error message at me: SWREG Newsletter: line 14: error: cannot nest includes deeper than 10 levels. As far as I could see this limitation is hardcoded to a depth of 10 and can only be changed at compile time. Why is it in place? I understand that you CAN create loops via the include command and limiting the inclusion depth is a way to circumvent loops - but ten is a very low value and the fact that you can't change it via a config file or sorta is even worse. My "fix" so far has been ignoring this, i.e. not returning false. I'm pretty sure that's not the best way to do it but it seems to be working so far. I'd really like to hear your opinion on this issue. Best regards, Mihai **

3 3

[Dovecot] Sieve, before script - Can it include "personal" scripts?
by Steve Fatula 11 Sep '11

11 Sep '11

Using sieve_before, can the script it references include a file from the personal space? I want to set some parameters (by user using the variables extension) there to control what the before script does, so, every user would have the file in their personal include space. If not, is there another way? Can the sieve_before and sieve_global_path be set from userdb extra fields?

2 1

[Dovecot] BestPractice to migrate imap mailbox from one machine to another
by Tobias Hachmer 10 Sep '11

10 Sep '11

Hi list, currently I use dovecot v1.2.15 with maildir++ mailboxes. (Debian Squeeze) I want to set up a different server with dovecot v2, also maildir++ mailboxes. (also Debian Squeeze) What is the best way to copy the existing mailboxes from the older machine running dovecot v1.2.15 to the new naked machine? Greetz, Tobias

6 12

[Dovecot] debug user's message retrieval
by Костырев Александр Алекс еевич 10 Sep '11

10 Sep '11

Hi there! Is there any method to log user's activity with pop3 service? I'll try to explain situation: In maillog I saw that my dovecot lmtp saved four letters in user's mailbox. After a while I got a call from that user saying that he received nothing. Is there any method to log that that user RETR every single letter, maybe with full names of letter's id or something like that?

3 5

Re: [Dovecot] Mails repopping
by Simon Brereton 09 Sep '11

09 Sep '11

> -----Original Message----- > From: Charles Marcus [mailto:CMarcus@Media-Brokers.com] > Sent: Friday, September 09, 2011 2:51 PM > On 2011-09-09 1:07 PM, Simon Brereton <simon.brereton(a)buongiorno.com> > wrote: > > I have a server that's been running Courier for about 6 years and > in > > all that time I think I've only ever had 1 issues where an entire > mail > > box was repopped by a webmail client. > > I don't understand... > > Webmail doesn't speak 'pop' (that I've ever heard of)... so how does > a webmail client 'repop' emails? What webmail is this? It's Horde webmail. Webmail does pop. Yahoo and Gmail do it too. When I first set up the server, it did it on first login - obviously because the server had changed but it's doing it once a week now (and in fact, it did it twice today). It's not fatal, no one will die. It is a PITA though. Simon

1 0

[Dovecot] Mails repopping
by Simon Brereton 09 Sep '11

09 Sep '11

HI I don't know if this is a dovecot issue or a client one. But as Dovecot is the most recent change, I'll start here. I have a server that's been running Courier for about 6 years and in all that time I think I've only ever had 1 issues where an entire mail box was repopped by a webmail client. However, since moving to a new server and dovecot 4 weeks ago, I've now had the webmail client repop this account 4 times (there are about 230 mails in the account). Is there a setting I need to tighten to prevent/remedy this? I have no idea if it's happening on other accounts, but this is one that I see. The format is maildir. There has been no changes to the webmail client. Thanks. Simon

1 0

Re: [Dovecot] 2.1: imapc LIST problem / usage question
by Lutz Preßler 09 Sep '11

09 Sep '11

On Fr, 09 Sep 2011, Lutz Preßler wrote: > On Fr, 09 Sep 2011, Timo Sirainen wrote: > > > On Fri, 2011-09-09 at 12:01 +0200, Lutz Preßler wrote: > [...] > > > For the Gmail mailboxe the INBOX.gmail prefix is missing and / is used > > > as separator. > > > > Fixed in hg. > Thanks. LIST is now working correctly in my setup, but SUBSCRIBE ist not. With subscriptions=no, as written (but same behaviour with subscriptions=yes), SUBSCRIBE INBOX.gmail.INBOX (or others) yields 0 NO [SERVERBUG] Internal error occurred. Refer to server log for more information. [2011-09-09 16:39:40] logging (with mail_debug=yes) only Sep 9 16:39:40 host dovecot: imap(1143, user): Error: stat((null)) failed: Bad address Lutz

1 0

[Dovecot] Quota fs (ignore mount)
by Peter Ignatov 09 Sep '11

09 Sep '11

> I set "quota: fs:INBOX:noenforcing:mount=/var/spool/mail", but receive: "fs quota add storage dir = /home/pit/mail"... > Why ? Well .. I'm not entirely sure if the current behavior is good or not, but what you need to do to get it working is to add two quota roots. One for /home/pit/mail (i.e. without specifying mount=) and another for the INBOX's /var/spool/mail. Don't work... :-( # dovecot -n # 1.2.17: /etc/dovecot.conf # OS: Linux 2.6.18-274.el5.asp121 x86_64 Red Hat Enterprise Linux Server release 5.6 (Tikanga) log_path: /var/log/dovecot.log protocols: pop3 pop3s listen: * login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/pop3-login verbose_proctitle: yes mail_location: mbox:~/mail:INBOX=/var/spool/mail/%u mail_debug: yes mail_executable: /usr/libexec/dovecot/pop3 mail_plugins: quota mail_plugin_dir: /usr/lib64/dovecot/pop3 auth default: passdb: driver: pam userdb: driver: passwd plugin: quota: fs:INBOX:noenforcing quota2: fs:boxes:noenforcing:mount=/var/spool/mail quota_rule: *:storage=10240 quota_rule2: *:storage=15000 dovecot.log: ------------ Sep 09 16:13:46 pop3-login: Info: Login: user=<pit>, method=PLAIN, rip=192.168.3.10, lip=192.168.6.3, TLS Sep 09 16:13:46 POP3(pit): Info: Loading modules from directory: /usr/lib64/dovecot/pop3 Sep 09 16:13:46 POP3(pit): Info: Module loaded: /usr/lib64/dovecot/pop3/lib10_quota_plugin.so Sep 09 16:13:46 POP3(pit): Info: Effective uid=500, gid=500, home=/home/pit Sep 09 16:13:46 POP3(pit): Info: Quota root: name=INBOX backend=fs args=noenforcing Sep 09 16:13:46 POP3(pit): Info: Quota rule: root=INBOX mailbox=* bytes=10485760 messages=0 Sep 09 16:13:46 POP3(pit): Info: Quota rule: root=INBOX mailbox=* bytes=15360000 messages=0 Sep 09 16:13:46 POP3(pit): Info: Quota root: name=boxes backend=fs args=noenforcing:mount=/var/spool/mail Sep 09 16:13:46 POP3(pit): Info: mbox: data=~/mail:INBOX=/var/spool/mail/pit Sep 09 16:13:46 POP3(pit): Info: fs: root=/home/pit/mail, index=, control=, inbox=/var/spool/mail/pit Sep 09 16:13:46 POP3(pit): Info: fs quota add storage dir = /home/pit/mail Sep 09 16:13:46 POP3(pit): Info: fs quota block device = /dev/cciss/c0d0p3 Sep 09 16:13:46 POP3(pit): Info: fs quota mount point = / Sep 09 16:13:46 POP3(pit): Info: fs quota mount type = ext3 Sep 09 16:13:46 POP3(pit): Info: Disconnected: Logged out top=0/0, retr=0/0, del=0/2, size=1249

1 0

Re: [Dovecot] Shared Mailboxes with VirtualUsers and mail_location retrieved from ldap
by mailing lists 09 Sep '11

09 Sep '11

and for the time that user001 execute the imap 'list' command, this is the log trace in dovecot: Sep 9 13:09:12 imap1 dovecot: imap(user001): Debug: Namespace : type=shared, prefix=shared.%u., sep=., inbox=no, hidden=no, list=children, subscriptions=no location=maildir:%h/mailSubDir:INDEX=~/mailSubDir/shared/%u Sep 9 13:09:12 imap1 dovecot: imap(user001): Debug: shared: root=/var/run/dovecot/, index=, control=, inbox=, alt= [...] Sep 9 13:10:44 imap1 dovecot: auth: Debug: master in: USER 1 user002 service=lib-storage Sep 9 13:10:44 imap1 dovecot: auth: Debug: ldap(user002): user search: base=dc=example,dc=com scope=subtree filter=(&(objectClass=CourierMailAccount)(uid=user002)) fields=mailbox,homeFilter Sep 9 13:10:44 imap1 dovecot: auth: Debug: ldap(user002): result: mailbox(mail=maildir:/var/maildir/%$)=vol05/4/40/user002 homeFilter(home)=/var/mailfilter/vol05/4/40/user002 Sep 9 13:10:44 imap1 dovecot: auth: Debug: master out: USER 1 user002 mail=maildir:/var/maildir/vol05/4/40/user002 home=/var/mailfilter/vol05/4/40/user002 Sep 9 13:10:44 imap1 dovecot: imap(user001): Debug: auth input: user002 mail=maildir:/var/maildir/vol05/4/40/user002 home=/var/mailfilter/vol05/4/40/user002 Sep 9 13:10:44 imap1 dovecot: imap(user001): Debug: maildir++: root=/var/mailfilter/vol05/4/40/user002/mailSubDir, index=/var/mailfilter/vol04/4/46/user001/mailSubDir/shared/user002, control=, inbox=/var/mailfilter/vol05/4/40/user002/mailSubDir, alt= Sep 9 13:10:44 imap1 dovecot: imap(user001): Debug: acl: initializing backend with data: vfile Sep 9 13:10:44 imap1 dovecot: imap(user001): Debug: acl: acl username = user001 Sep 9 13:10:44 imap1 dovecot: imap(user001): Debug: acl: owner = 0 Sep 9 13:10:44 imap1 dovecot: imap(user001): Debug: acl vfile: Global ACL directory: (none) Sep 9 13:10:44 imap1 dovecot: imap(user001): Debug: acl: Mailbox not in dovecot-acl-list: shared.user002.INBOX

1 0

Re: [Dovecot] Shared Mailboxes with VirtualUsers and mail_location retrieved from ldap
by mailing lists 09 Sep '11

09 Sep '11

(I'm sorry for breaking the thread with each mail) On 09/09/2011 10:04 AM, Jan-Frode Myklebust wrote: > On Fri, Sep 09, 2011 at 08:18:40AM +0100, mailing lists wrote: >> >> and how to I might configure dovecot to use the mail directory as a subdirectory of the home directory? >> >> this way all lookups for home (with %%h fetched from ldap) will return the correct locationand mail will be in (i.e.) ~/mailSubDir >> >> is this configuration possible? > > In the main dovecot.conf: > > mail_location = maildir:~/mailSubDir > > In the ldap-config: > > user_attrs = homeFilter=home and which is the value for the location directive in namespace declaration ?? namespace { list = children location = maildir:%%h/mailSubDir:INDEX=~/mailSubDIr/shared/%%u prefix = shared.%%u. separator = . subscriptions = no type = shared } with the above conf. no shared folders are seen by tests users and afaik %%h is retrieved from ldap. this is that I had done until now: # telnet localhost 143 Trying ::1... Connected to localhost. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. . login user001 secret . OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAME . create INBOX.docs-user001 . OK Create completed. . setacl INBOX.docs-user001 user002 lr . OK Setacl complete. . logout * BYE Logging out . OK Logout completed. Connection closed by foreign host. # telnet localhost 143 Trying ::1... Connected to localhost. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. . login user002 secret . OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAME . create INBOX.docs-user002 . OK Create completed. . setacl INBOX.docs-user002 user001 lr . OK Setacl complete. . logout * BYE Logging out . OK Logout completed. Connection closed by foreign host. # cat /var/maildir/shared-mailboxes shared/shared-boxes/user/user002/user001 1 shared/shared-boxes/user/user002/user002 1 shared/shared-boxes/user/user001/user001 1 shared/shared-boxes/user/user001/user002 1 # cat /var/maildir/vol04/4/46/user001/.docs-user001/dovecot-acl user=user002 lr # cat /var/maildir/vol05/4/40/user002/.docs-user002/dovecot-acl user=user001 lr # telnet localhost 143 Trying ::1... Connected to localhost. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. . login user001 secret . OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS ACL RIGHTS=texk] Logged in . namespace * NAMESPACE (("INBOX." ".")) (("shared." ".")) NIL . OK Namespace completed. . list "shared." "*" . OK List completed. /--------------/ # grep ^[^#] /etc/dovecot/dovecot-ldap.conf.ext uris = ldap://ldap.example.com dn = cn=testuser,dc=example,dc=com dnpass = secret sasl_bind = no tls = no auth_bind = yes ldap_version = 3 base = dc=example,dc=com deref = never scope = subtree user_attrs = mailbox=mail=maildir:/var/maildir/%$,homeFilter=home user_filter = (&(objectClass=CourierMailAccount)(uid=%u)) pass_filter = (&(objectClass=CourierMailAccount)(uid=%u)) # dovecot -n # 2.0.14: /etc/dovecot/dovecot.conf # OS: Linux 2.6.34.7-0.7-xen x86_64 openSUSE 11.3 (x86_64) auth_debug = yes auth_debug_passwords = yes auth_verbose = yes auth_verbose_passwords = plain base_dir = /var/run/dovecot/ disable_plaintext_auth = no mail_debug = yes mail_fsync = always mail_gid = 5000 mail_location = maildir:~/mailSubDir mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = acl mail_uid = 5000 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mmap_disable = yes namespace { inbox = yes location = prefix = INBOX. separator = . } namespace { list = children location = maildir:%%h/mailSubDir:INDEX=~/mailSubDir/shared/%%u prefix = shared.%%u. separator = . subscriptions = no type = shared } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_shared_dict = file:/var/maildir/shared-mailboxes sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap lmtp service lmtp { inet_listener lmtp { port = 24 } unix_listener lmtp { user = vmail } } ssl = no userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes protocol lmtp { mail_plugins = acl } protocol lda { mail_plugins = acl } protocol imap { mail_max_userip_connections = 100 mail_plugins = acl imap_acl autocreate }

1 0

Re: [Dovecot] Shared Mailboxes with VirtualUsers and mail_location retrieved from ldap
by mailing lists 09 Sep '11

09 Sep '11

On 09/08/2011 03:07 PM, Timo Sirainen wrote: > On Thu, 2011-09-08 at 12:14 +0100, mailing lists wrote: > >> yes, my virtual users have separate directories for home and mail. >> Their locations are stored in ldap attributes (with random generated >> paths), so a flat scheme like /var/maildr/%%u isn't valid. > > Sorry, you're out of luck with that kind of a setup. Only the %%h can > look up a home directory from LDAP. Maybe some day in future there will > be other variables that can be looked up. and how to I might configure dovecot to use the mail directory as a subdirectory of the home directory? this way all lookups for home (with %%h fetched from ldap) will return the correct locationand mail will be in (i.e.) ~/mailSubDir is this configuration possible?

2 1

[Dovecot] lmtp -- save failed to INBOX: BUG: Unknown internal error
by Jan-Frode Myklebust 09 Sep '11

09 Sep '11

I've had 18 instances of this error the last 24 hours: Sep 8 08:56:00 popimap1 dovecot:: lmtp(10529, first.last(a)example.om) mGdAOtdlaE4hKQAAg/aw4w: msgid=<B8FA3D5B230184409450D51D522678404E5052(a)ASP-EX02.ASP.lan>: save failed to INBOX: BUG: Unknown internal error 17 on lmtp-server A, and one on lmtp-server B. On server A it was a message with 55 recepients, where 17 failed initially -- and the was then successfully delivered. lmtp pid 10529, 08:55:57-08:56:01 - 11 successfull deliveries, 17 BUGs lmtp pid 10609, 08:56:00 - 1 successfull deliveries lmtp pid 31291, 08:56:06 - 2 successfull deliveries lmtp pid 10482, 08:56:04-06 - 3 successfull deliveries lmtp pid 6738, 08:56:06 - 1 successfull deliveries lmtp pid 24488, 08:56:06-07 - 5 successfull deliveries lmtp pid 7101, 08:56:01-07 - 19 successfull deliveries lmtp pid 21330, 08:56:08 - 1 successfull deliveries lmtp pid 2177, 08:56:09 - 3 successfull deliveries lmtp pid 7085, 08:56:10 - 3 successfull deliveries lmtp pid 6633, 08:56:08-10 - 6 successfull deliveries The one on lmtp-server B was a different msgid from A, and also had several recepients (6). It was successfully delivered to the recepient that initially failed the same second. Config here: # 2.0.14: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.26.1.el5 x86_64 Red Hat Enterprise Linux Server release 5.5 (Tikanga) auth_verbose = yes auth_verbose_passwords = sha1 disable_plaintext_auth = no mail_gid = 3000 mail_location = maildir:~/:INDEX=/indexes/%1u/%1.1u/%u mail_plugins = quota mail_uid = 3000 mmap_disable = yes namespace { inbox = yes location = prefix = INBOX. type = private } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { quota = maildir:User quota } service auth-worker { user = $default_internal_user } service auth { client_limit = 4396 } service imap-login { inet_listener imap { address = * port = 143 } } service imap { executable = /usr/local/sbin/imap-wrapper.sh process_limit = 2048 } service lmtp { client_limit = 1 inet_listener lmtp { address = * port = 24 } process_limit = 25 } service pop3-login { inet_listener pop3 { address = * port = 110 } } service pop3 { executable = /usr/local/sbin/pop-wrapper.sh process_limit = 2048 } ssl = no userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lmtp { mail_plugins = quota } protocol imap { imap_client_workarounds = delay-newmail mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = UID%u-%v } -jf

2 7

[Dovecot] copy and empty userA folder1, append to /var/mail/userB
by mathog 08 Sep '11

08 Sep '11

Dovecot 2.0.13 on a 64 bit linux. We have an archiver account on one machine. Most mailing lists that handles go directly to it and everything is fine. However, there is one campus list that will only send to real people. So for that one I subscribed. When one of these messages comes in, which is 1-2x per week, I copy it to an export folder and then manually run a script which does: cat ~me/mail/export >>/var/mail/archiver echo "" > ~me/mail/export That worked fine on our last system, but dovecot doesn't like it. It leaves the imap indices for the export mailbox in an inconsistent state, so that roundcube (through dovecot) refuses to drop messages into it. The error message roundcube emits is: ServerError: Mailbox isn't a valid mbox file. Presumably the second half is from dovecot. I need a supported way to go about this, so that the next time one comes in I can copy to that folder again. The export mailbox is always completely emptied. It would suffice if there was some way to force dovecot to create "empty"" .imap/export: dovecot.index.cache dovecot.index.log files. Note this isn't a problem for the archiver itself, since it doesn't have any imap indexed files. Suggestions? Thank you, David Mathog mathog(a)caltech.edu Manager, Sequence Analysis Facility, Biology Division, Caltech

2 2

Re: [Dovecot] Shared Mailboxes with VirtualUsers and mail_location retrieved from ldap
by mailing lists 08 Sep '11

08 Sep '11

Hello, On 09/07/2011 07:22 PM, Timo Sirainen wrote: > On 6.9.2011, at 14.27, mailing lists wrote: >> At this point I need shared mailboxes but since user mail/home locations are ldap attributes, how is it supposed I must configure this for shared mailboxes? >> >> for the users' mail/home directories I set this line: >> >> user_attrs = mailbox=mail=maildir:/var/maildir/%$,homeFilter=home > > Are home dirs and mail dirs related in any way? The only way you can get it working is by using home dirs, e.g.: > > user_attrs = mailbox=home=/var/maildir/%$ yes, my virtual users have separate directories for home and mail. Their locations are stored in ldap attributes (with random generated paths), so a flat scheme like /var/maildr/%%u isn't valid. for typical (virtual) users the location returned looks like: Sep 8 12:48:33 imap1 dovecot: auth: Debug: ldap(user012,::1): result: mailbox(mail=maildir:/var/maildir/%$)=vol06/1/15/user012 homeFilter(home)=/var/mailfilter/vol06/1/15/user012 ... Sep 8 12:54:50 imap1 dovecot: imap(user012): Debug: maildir++: root=/var/maildir/vol06/1/15/user012, index=, control=, inbox=/var/maildir/vol06/1/15/user012, alt= > Then in dovecot.conf: > > mail_location = maildir:~/ > >> namespace { >> type = shared >> separator = / >> prefix = shared/%%u/ >> subscriptions = no >> list = children > > location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u this is that I see in logs and not shared folders are seen by imap clients: Sep 8 12:57:11 imap1 dovecot: imap(user012): Debug: Namespace : type=shared, prefix=shared.%u., sep=., inbox=no, hidden=no, list=children, subscriptions=no location=maildir:%h/Maildir:INDEX=~/Maildir/shared/%u Sep 8 12:57:11 imap1 dovecot: imap(user012): Debug: shared: root=/var/run/dovecot/, index=, control=, inbox=, alt= Sep 8 12:57:11 imap1 dovecot: imap(user012): Debug: acl: initializing backend with data: vfile I fail to understand how %%u is retrieved from ldap... /----------/ # dovecot -n # 2.0.14: /etc/dovecot/dovecot.conf # OS: Linux 2.6.34.7-0.7-xen x86_64 openSUSE 11.3 (x86_64) auth_debug = yes auth_debug_passwords = yes auth_verbose = yes auth_verbose_passwords = plain base_dir = /var/run/dovecot/ disable_plaintext_auth = no mail_debug = yes mail_fsync = always mail_gid = 5000 mail_location = maildir:~/ mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = acl mail_uid = 5000 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mmap_disable = yes namespace { inbox = yes location = prefix = INBOX. separator = . } namespace { list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u prefix = shared.%%u. separator = . subscriptions = no type = shared } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_shared_dict = file:/var/maildir/shared-mailboxes sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap ssl = no userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes protocol imap { mail_max_userip_connections = 100 mail_plugins = acl imap_acl autocreate }

2 1

Re: [Dovecot] is it necessary lmtp and director to avoid index corruption in mail delivery?
by mailing lists 08 Sep '11

08 Sep '11

JF, thank you for the reply. I'm just curious how to big players fix this problem, which seems impact systems with shared storage. Have a nice day. On 09/07/2011 12:59 PM, Jan-Frode Myklebust wrote: > On Wed, Sep 07, 2011 at 11:26:28AM +0100, mailing lists wrote: >> Hello all, >> If I have several postfix/dovecot-lda boxes with shared nfs storage, >> how director helps in this scenario? > > The director can help by directing each unique user to the same backend > server for each delivery, which should give you better performance > (indexes cached in memory on only one machine instead of on all, > inotify will work for IMAP NOTIFY), and also avoid some apparent race > conditions that has lead to index corruption when several nodes are > writing to the same mailbox at the same time. > >> is it necesary to use lmtp instead of dovecot-lda? > > Yes. > > >> With postfix/dovecot-lda boxes incoming mail happens at the smtp layer >> but director redirects are working in the lmtp/imap/pop3 layer. > > Right. > > With LMTP you can have dovecot listening on the network (port 24/tcp) > for incoming mail. No need for postfix on the backend mailstorage > servers. > > Our setups has been: > > Mailgw[1-14] ---smtp--> dovecot-server[1-5] (postfix + dovecot/lda) > > and used MX priorities to make all deliveries go to the same > dovecot-server with the others as backup. > > $ dig mx deliver.example.com +short > 10 dove2.example.com. > 15 dove3.example.com. > 20 dove4.example.com. > 25 dove5.example.com. > 5 dove1.example.com. > > > Now I'm moving towards: > > Mailgw[1-14] ---lmtp--> dovecot-server[1-5] (dovecot/lmtp) > > but worry that the index corruption might hit me again.. Ideally > I want: > > Mailgw[1-14] ---lmtp--> directors --lmtp--> dovecot-server[1-5] (dovecot/lmtp) > > but lmtp-proxying seems to have bugs (ref: my latest mails to this > list). > > > -jf

1 0

[Dovecot] limit number of simultaneous lmtp deliveries ?
by Jan-Frode Myklebust 08 Sep '11

08 Sep '11

We have quite a few frontend mail gateways that deliver incoming email trough our dovecot director (lmtp proxy) to the backend lmtp servers, and are seeing this logged on the frontend mail gateways: Sep 5 10:51:56 mailgw1 postfix/lmtp[23443]: 0E2F41C01A: to=<me(a)example.com>, relay=loadbalancers.example.com[192.168.42.15]:24, delay=61, delays=0.02/0.3/31/30, dsn=4.4.0, status=deferred (host loadbalancers.example.com[192.168.42.15] said: 451 4.4.0 Remote server not answering (DATA output timeout) (in reply to end of DATA command)) It's a bit unclear to me if this leads to duplicate deliveries, or just delayed deliveries, but -- is there any way to limit the number of simultanous deliveries on either the dovecot director or the backend lmtp-servers ? Will "process_limit=10" work for "service lmtp"? -jf

2 4

[Dovecot] test
by Adrian Stoica 08 Sep '11

08 Sep '11

Hello i use dovecot 2.0.14 , with exim 4.76 using dovecot-lda. We have the following problem: when I receive mail from the site http://www.transfer.ro, which is a file transfer site, most emails appear to be empty. Empty rows appear in email body slipped through the existing, and this makemy mail client to show me an empty mail. You can see the content only by viewing the message source. instead of "- np4e68592849da7 Content-type: text / plain, charset = utf-8 " appear "- np4e68592849da7 Content-type: text / plain, charset = utf-8 " , and that blank line spoil everything. You can check if there is somethingwrong ?

2 2

[Dovecot] ManageSieve with SSL/TLS only
by Karol Babioch 08 Sep '11

08 Sep '11

Hi, I'm quite new to Dovecot and ManageSieve, so probably I've missed something, although I couldn't find any hints in the wiki. I'm interested in running ManageSieve with SSL/TLS only. So is there any way to reject any non encrypted connections? I couldn't find any parameter for this purpose. I'm currently using dovecot 1.2.15 provided with Debian Squeeze, but I couldn't find any parameter in the 2.0 branch neither. Best regards, Karol Babioch

2 1

[Dovecot] Shared Mailboxes with VirtualUsers and mail_location retrieved from ldap
by mailing lists 07 Sep '11

07 Sep '11

Hello, I spend a couple of days configurating a new installation of dovecot 2.0.14 with virtual accounts and NFS storage for maildir home/mail directories. At this point I need shared mailboxes but since user mail/home locations are ldap attributes, how is it supposed I must configure this for shared mailboxes? for the users' mail/home directories I set this line: user_attrs = mailbox=mail=maildir:/var/maildir/%$,homeFilter=home creating a namespace like the below one for shared mbx throw a lot of errors: namespace { type = shared separator = / prefix = shared/%%u/ subscriptions = no list = children #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u location = mailbox=mail=maildir:/var/maildir/%$ } I would like to hear if anyone has this configuration running. Thank you. /--------------/ uris = ldap://ldap.example.com dn = cn=user,ou=People,dc=example,dc=com dnpass = secret sasl_bind = no tls = no auth_bind = yes ldap_version = 3 base = dc=example,dc=com deref = never scope = subtree user_attrs = mailbox=mail=maildir:/var/maildir/%$,homeFilter=home user_filter = (&(objectClass=CourierMailAccount)(uid=%u)) pass_filter = (&(objectClass=CourierMailAccount)(uid=%u)) # dovecot -n # 2.0.14: /etc/dovecot/dovecot.conf # OS: Linux 2.6.34.7-0.7-xen x86_64 openSUSE 11.3 (x86_64) auth_debug = yes auth_debug_passwords = yes auth_verbose = yes auth_verbose_passwords = plain base_dir = /var/run/dovecot/ disable_plaintext_auth = no mail_debug = yes mail_fsync = always mail_gid = 5000 mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = acl mail_uid = 5000 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mmap_disable = yes namespace { list = children location = mailbox=mail=maildir:/var/maildir/%$ prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace { inbox = yes location = prefix = INBOX. separator = . } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap ssl = no userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes protocol imap { mail_max_userip_connections = 100 mail_plugins = acl imap_acl autocreate }

2 1

[Dovecot] Quota fs (ignore mount)
by Peter Ignatov 07 Sep '11

07 Sep '11

Hi, I set "quota: fs:INBOX:noenforcing:mount=/var/spool/mail", but receive: "fs quota add storage dir = /home/pit/mail"... Why ? In fstab: /dev/mapper/mpath1p1 /var/spool/mail ext2 usrquota 0 0 In dovecot.log: Sep 06 15:02:00 pop3-login: Info: Login: user=<pit>, method=PLAIN, rip=192.168.3.10, lip=192.168.6.3, TLS Sep 06 15:02:00 POP3(pit): Info: Loading modules from directory: /usr/lib64/dovecot/pop3 Sep 06 15:02:00 POP3(pit): Info: Module loaded: /usr/lib64/dovecot/pop3/lib10_quota_plugin.so Sep 06 15:02:00 POP3(pit): Info: Effective uid=500, gid=500, home=/home/pit Sep 06 15:02:00 POP3(pit): Info: Quota root: name=INBOX backend=fs args=noenforcing:mount=/var/spool/mail Sep 06 15:02:00 POP3(pit): Info: Quota rule: root=INBOX mailbox=* bytes=10485760 messages=0 Sep 06 15:02:00 POP3(pit): Info: Quota warning: bytes=9961472 (95%) messages=0 command=/usr/local/bin/quota-warning.sh 95 Sep 06 15:02:00 POP3(pit): Info: mbox: data=~/mail:INBOX=/var/spool/mail/pit Sep 06 15:02:00 POP3(pit): Info: fs: root=/home/pit/mail, index=, control=, inbox=/var/spool/mail/pit Sep 06 15:02:00 POP3(pit): Info: fs quota add storage dir = /home/pit/mail Sep 06 15:02:00 POP3(pit): Info: fs quota block device = /dev/cciss/c0d0p3 Sep 06 15:02:00 POP3(pit): Info: fs quota mount point = / Sep 06 15:02:00 POP3(pit): Info: fs quota mount type = ext3 Sep 06 15:02:01 POP3(pit): Info: Disconnected: Logged out top=0/0, retr=0/0, del=0/2, size=1249 dovecot --version 1.2.17 dovecot -n # 1.2.17: /etc/dovecot.conf # OS: Linux 2.6.18-274.el5.asp121 x86_64 Red Hat Enterprise Linux Server release 5.6 (Tikanga) log_path: /var/log/dovecot.log protocols: pop3 pop3s listen: * login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/pop3-login verbose_proctitle: yes mail_location: mbox:~/mail:INBOX=/var/spool/mail/%u mail_debug: yes mail_executable: /usr/libexec/dovecot/pop3 mail_plugins: quota mail_plugin_dir: /usr/lib64/dovecot/pop3 auth default: passdb: driver: pam userdb: driver: passwd plugin: quota: fs:INBOX:noenforcing:mount=/var/spool/mail quota_rule: *:storage=10240 quota_warning: storage=95%% /usr/local/bin/quota-warning.sh 95

2 1

[Dovecot] Sieve "header :value" test does not work
by Tom Hendrikx 07 Sep '11

07 Sep '11

hi, After following some examples and searching for sieve samples in this ml history, I'm quite sure that the following sieve snippet should give no surprises: if header :value "ge" :comparator "i;ascii-numeric" "X-Header-Name" "0.99" { /* do something */ } However the Pigeonhole Sieve 0.2.3 on dovecot 2.0.14 gives me following error: test: line 3: error: unknown tagged argument ':value' for the header test (reported only once at first occurence). test: error: validation failed. What obvious mistake am I failing to see here? -- Tom

2 5

[Dovecot] is it necessary lmtp and director to avoid index corruption in mail delivery?
by mailing lists 07 Sep '11

07 Sep '11

Hello all, If I have several postfix/dovecot-lda boxes with shared nfs storage, how director helps in this scenario? is it necesary to use lmtp instead of dovecot-lda? With postfix/dovecot-lda boxes incoming mail happens at the smtp layer but director redirects are working in the lmtp/imap/pop3 layer.

2 1

Re: [Dovecot] error in logs, but system appears to work
by Joseph Tam 07 Sep '11

07 Sep '11

Chris Hoogendyk writes: > So, looking at my other system that has been running dovecot for over a > year, I see that the entries are mostly 0600, but there are a few 0660. > The system I was just implementing has mostly 0660, but some 0600. We > had seen occasional similar errors on the other system. Been there, done that. Timo already gave an explanation of why 0600 gets rid of the problem. I'll add a reminder that you'll need to track down the reason why mailboxes are created user:mail/0660 in the first place. It's usually done by the LDA when creating a brand new mailbox (for example, Solaris's mail.local). If you've replaced your LDA with Dovecot's deliver, then this won't be a problem anymore. You may also have to scour your userbase's personal mail collection for mailboxes that has 1) mode 0660, and 2) group membership the user is not a part of, and fix up the permissions. Such a thing could happen if you've reassigned a user's GID. Joseph Tam <jtam.home(a)gmail.com>

1 0