- dovecot - dovecot.org

[Dovecot] get MAIL_FETCH_UIDL_FILE_NAME after save a email
by Alex Baule 23 Sep '10

23 Sep '10

Hi Timo... I Try to get the name from the saved email, you said to me, to get this with the get_special, ok... thats work. I get the name with this: mail_get_special(t->save_ctx->dest_mail, MAIL_FETCH_UIDL_FILE_NAME, &fname); By i got some mistake... when i save a email that exist in the same directory, the email is rewrited with another name, but the get_special give me the old one name. Have another way to get the name from a saved email, after save it ? after this: ret = zbox->super.transaction_commit(t, changes_r); To get the correct name from a saved email.

2 2

[Dovecot] virtual_transport lmtp Error: User doesn't have home dir set
by Bernd Schmelter 23 Sep '10

23 Sep '10

Hallo, Errormessage in log, but it delivers correct Sep 23 21:30:40 serv postfix/pickup[15974]: 8807F4E127: uid=0 from=<root> Sep 23 21:30:40 serv postfix/cleanup[16049]: 8807F4E127: message-id=<20100923193040.8807F4E127(a)serv.chefe.dyndns.org> Sep 23 21:30:40 serv postfix/qmgr[15975]: 8807F4E127: from=<root(a)chefe.dyndns.org>, size=451, nrcpt=1 (queue active) Sep 23 21:30:43 serv postfix/smtpd[16056]: connect from localhost[127.0.0.1] Sep 23 21:30:43 serv postfix/smtpd[16056]: 829E54E125: client=localhost[127.0.0.1] Sep 23 21:30:43 serv postfix/cleanup[16049]: 829E54E125: message-id=<20100923193040.8807F4E127(a)serv.chefe.dyndns.org> Sep 23 21:30:43 serv postfix/qmgr[15975]: 829E54E125: from=<root(a)chefe.dyndns.org>, size=917, nrcpt=1 (queue active) Sep 23 21:30:43 serv postfix/smtpd[16056]: disconnect from localhost[127.0.0.1] Sep 23 21:30:43 serv amavis[14848]: (14848-12) Passed CLEAN, <root(a)chefe.dyndns.org> -> <benn(a)chefe.dyndns.org>, Message-ID: <20100923193040.8807F4E127(a)serv.chefe.dyndns.org>, mail_id: 8zA2HZgsRuZy, Hits: -1.901, size: 451, queued_as: 829E54E125, 2984 ms Sep 23 21:30:43 serv dovecot: lmtp(16061): Connect from local Sep 23 21:30:43 serv postfix/lmtp[16052]: 8807F4E127: to=<benn(a)chefe.dyndns.org>, orig_to=<benn>, relay=127.0.0.1[127.0.0.1]:10024, delay=3.1, delays=0.08/0.02/0.01/3, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=14848-12, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 829E54E125) Sep 23 21:30:43 serv postfix/qmgr[15975]: 8807F4E127: removed Sep 23 21:30:43 serv dovecot: auth: mysql: Connected to 127.0.0.1 (mailuser) Sep 23 21:30:43 serv dovecot: lmtp(16061, benn(a)chefe.dyndns.org) Error: User benn(a)chefe.dyndns.org doesn't have home dir set, disabling duplicate database ------------------------------------------------------------- Sep 23 21:30:43 serv dovecot: dict: mysql: Connected to 127.0.0.1 (mailuser) Sep 23 21:30:43 serv dovecot: lmtp(16061, benn(a)chefe.dyndns.org) FEi8JOOqm0y9PgAA2Ba9sg: sieve: msgid=<20100923193040.8807F4E127(a)serv.chefe.dyndns.org>: stored mail into mailbox 'INBOX' Sep 23 21:30:43 serv postfix/lmtp[16060]: 829E54E125: to=<benn(a)chefe.dyndns.org>, relay=serv.chefe.dyndns.org[private/dovecot-lmtp], delay=0.24, delays=0.02/0.04/0.03/0.15, dsn=2.0.0, status=sent (250 2.0.0 <benn(a)chefe.dyndns.org> FEi8JOOqm0y9PgAA2Ba9sg Saved) Sep 23 21:30:43 serv dovecot: lmtp(16061): Disconnect from local: Client quit Sep 23 21:30:43 serv postfix/qmgr[15975]: 829E54E125: removed ----------------- doveconf -n: # 2.0.3 (4a753371ae73): /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-486 i686 Debian squeeze/sid ext3 auth_mechanisms = plain login cram-md5 dict { expire = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } listen = * mail_location = maildir:/var/vmail/%d/%n mail_plugins = $mail_plugins quota expire managesieve_notify_capability = mailto managesieve_sieve_capability = comparator-i;octet comparator-i;ascii-casemap fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date spamtest spamtestplus virustest passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { autocreate = Trash autocreate2 = Sent autocreate3 = Drafts autocreate4 = Spam autosubscribe = Trash autosubscribe2 = Sent autosubscribe3 = Drafts autosubscribe4 = Spam expire = Trash expire2 = Sent expire_dict = proxy::expire quota = dict:user::proxy::quota quota_rule = *:storage=500M:messages=2048 quota_rule2 = Trash:storage=+50M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = /var/vmail/%d/%n/dovecot.sieve sieve_storage = /var/vmail/%d/%n/sieve } protocols = imap lmtp sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0660 user = vmail } user = dovecot } service dict { unix_listener dict { mode = 0600 user = vmail } user = dovecot } service imap-login { executable = /usr/lib/dovecot/imap-login } service imap { executable = /usr/lib/dovecot/imap } service lmtp { inet_listener lmtp { port = 24 } unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } user = vmail } service managesieve-login { executable = /usr/lib/dovecot/managesieve-login inet_listener sieve { port = 4190 } } service managesieve { executable = /usr/lib/dovecot/managesieve } service quota-warning { executable = script /usr/bin/quota-warning.sh unix_listener quota-warning { mode = 0600 user = vmail } user = vmail } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocol lmtp { mail_plugins = sieve quota } protocol imap { mail_plugins = $mail_plugins imap_quota autocreate } --------------- Errormessage occured after upgrade: Upgrade: dovecot-imapd:i386 (2.0.3-0~auto+11, 2.0.3-0~auto+13) What is dublicate database / It`s possible to suppress duplicate mails? Benn

2 2

[Dovecot] Does Director only work with dovecot proxy?
by Edward Carraro 23 Sep '10

23 Sep '10

I was reading "conf.d/10-director.conf" and it mentions Dovecot proxy. I've been using perdition in the past for my pop/imap proxying needs and wasn't sure if Director could also use perdition or if it only works with Dovecots proxying. Thanks!

2 1

[Dovecot] Creating 'trash' folder
by Jerry 23 Sep '10

23 Sep '10

This might well be OT; however, I thought I would ask anyway. Please keep in mind that the IMAP server is Dovecot. I have a friend who uses Becky Internet Mail <http://www.rimarts.co.jp/becky.htm> on a Windows system. There us an options under the configuration menu in Becky to create the trash folder on the server. It suggest ".trash" for the name. He is aware that I use Dovecot and wanted to know if that would actually work. He claims to have activated that option in Becky; however, the trash folder was never actually created, or at least he was unable to locate it. I was just wondering if anyone had any experience with this sort of thing. I could gather more information, but I doubt that this really has anything to do with Dovecot anyway. -- Jerry ✌ Dovecot.user(a)seibercom.net Disclaimer: off-list followups get on-list replies or get ignored. Please do not ignore the Reply-To header. __________________________________________________________________ Happiness, n.: An agreeable sensation arising from contemplating the misery of another. Ambrose Bierce, "The Devil's Dictionary"

3 5

[Dovecot] Plain-Text & CRAM-MD5
by Leander S. 23 Sep '10

23 Sep '10

Hi there, I'm currently running my auth against CRAM-MD5 only. But I face problems with customers who apparently have smart phones which ONLY support plain-text authentification ;( Bad - I know, but what should I do ... ;/ So my question now is: Is it possible to run CRAM-MD5 as well as Plain-Text auth together with Postfix if Postfix is using Dovecot's SASL auth service? Cause that's how my setup currently looks like - except the plain-text auth ... Thanks & Regards

2 1

[Dovecot] recursive locks
by Mike Abbott 23 Sep '10

23 Sep '10

How can a dovecot-2 plugin safely use file-locks or file-dotlocks when the processes into which it plugs handle multiple connections? (Via, e.g., service imap { client_limit = N service_count = 0 }) Dovecot's file-locks and file-dotlocks do not appear to support nesting/recursion. For instance, squat_trie_lock(). Imagine one user is connected to a single imap process twice.

2 1

[Dovecot] Expunged GUID mismatch for UID error
by Xavier Pons 23 Sep '10

23 Sep '10

Hi, we have upgraded from v2.0.1 to v2.0.3 yesterday, trying to solve the "dovecot-uidlist: Duplicate file entry" errors. Now, at the moment, we don't get these errors, but when I try to expunge mails from my trash folder I get a lot of errors: Sep 23 14:24:51 imap1 dovecot: imap(user): Error: Mailbox Trash: Expunged GUID mismatch for UID 20193: 442b5ef0c3d3bf3cf4cb619944dce8e4 vs 0431b9bee05471199fabbc05af3a87a5 (with different GUIDs, and UIDs) and the mails are not expunged from Trash mailbox. Also, I have tried with "doveadm force-resync -u user Trash" and "doveadm expunge -u user mailbox Trash ALL" but not resolve the problem... Thanks Xavier Pons

3 3

Re: [Dovecot] service(imap-login): chiled ... killed with signal 11
by Timo Sirainen 23 Sep '10

23 Sep '10

On Thu, 2010-09-23 at 08:55 +0200, Burckhard Schmidt wrote: > #1 0xfecd750c in free () from /lib/libc.so.1 > No symbol table info available. > #2 0xfefc145c in CRYPTO_free () from /opt/csw/lib/libcrypto.so.0.9.8 > No symbol table info available. > #3 0xff04a13c in sk_free () from /opt/csw/lib/libcrypto.so.0.9.8 > No symbol table info available. > #4 0xff153bf0 in SSL_CTX_free () from /opt/csw/lib/libssl.so.0.9.8 My guess: You have an old and buggy OpenSSL library. I remember someone else also had a similar (same?) problem that went away when upgrading OpenSSL.

2 1

[Dovecot] Auth error
by Thiago Henrique 23 Sep '10

23 Sep '10

Hello, I'm testing Dovecot 2.0. I plan to use Dovecot 2.0 with thousands of domains per server. My user base is under virtual MySQL. I my tests, the authentication fails intermittently, and I could not find what's wrong. Can anyone help me? ################################################################################ Sep 22 16:31:16 box5 dovecot: last message repeated 9 times Sep 22 16:31:16 box5 dovecot: auth: Debug: auth client connected (pid=9249) Sep 22 16:31:20 box5 dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=imap#011lip=1.2.3.4#011rip=1.2.3.4#011lport=143#011rport=45348#011resp=AHRoaWFnbz1hZG1pbmxpbnV4LmNvbS5icgAxcWF6MndzeA== Sep 22 16:31:20 box5 dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Sep 22 16:31:20 box5 dovecot: auth: mysql: Connected to mysqlserver.com (database_name) Sep 22 16:31:20 box5 dovecot: auth: Debug: sql(account=domain.com,1.2.3.4): query: SELECT AccountName AS userdb_username, Password AS password, MailLocation AS userdb_mail, concat('*:bytes=', ItQuota, 'M') AS userdb_quota_rule FROM Account WHERE AccountName = 'account=domain.com' Sep 22 16:31:20 box5 dovecot: auth: Debug: client out: OK#0111#011user=account=domain.com Sep 22 16:31:20 box5 dovecot: auth: Debug: master in: REQUEST#0111#0119249#0111#011ba525e3c7ea765255e814a27c5ef8294 Sep 22 16:31:20 box5 dovecot: auth: Error: Master requested auth for nonexistent client 9249 Sep 22 16:31:20 box5 dovecot: imap-login: Internal login failure (auth failed, 1 attempts): user=<account=domain.com>, method=PLAIN, rip=1.2.3.4, lip=1.2.3.4, mpid=9225 ################################################################################ Thank you in advance. Best Regards -- []'s Thiago Henrique Network Administration Digirati Networks K8 Networks

2 1

[Dovecot] Sieve force SSL
by Lukas Haase 23 Sep '10

23 Sep '10

Hi, I have activated only imaps and managesieve. As sieve is running on a different port/protocol: Can I make sure that sieve can ONLY be used with SSL/TLS? As the credentials are transmitted I only offer services with SSL (IMAPS, SMTP over SSL, ...). For sieve I am not sure about this. If there is the possibility that user's credentials are transmitted in plain text I would block the port from the firewall, else I would offer my users the feature to change their rules with their own client (e.g. Thunderbird sieve). Regards, Luke

2 3

[Dovecot] Dovecot LDA, virtual users, multiple uids: No luck
by Toni Mueller 23 Sep '10

23 Sep '10

Hi, I'm trying to get Dovecot's deliver to create and use mailboxen with one uid per user. Reading the wiki, I decided to go with the sudo attempt, but I'm stuck because deliver fails to create the intermediate directories. The auth.log has this on the matter: sudo: dovelda : TTY=unknown ; PWD=/var/spool/postfix ; USER=root ; COMMAND=/usr/lib/dovecot/deliver -f toni(a)bogus.oeko.net -d dick(a)example.com Using strace on 'deliver', I get this: # su - dovelda $ echo "blubber" |sudo strace /usr/lib/dovecot/deliver -f toni(a)bogus.oeko.net -d dick(a)example.com ... geteuid() = 0 getgid() = 0 setgid(2000) = 0 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ setgroups(1, [2000]) = 0 setuid(2100) = 0 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ setuid(0) = -1 EPERM (Operation not permitted) getgid() = 2000 getegid() = 2000 setgid(0) = -1 EPERM (Operation not permitted) close(6) = 0 geteuid() = 2100 geteuid() = 2100 and subsequently, creating the directories fails. The values in the underlined lines above, 2100 and 2000, are from the database entry of the user I want to deliver the email to. My /etc/sudoers has this for dovelda: dovelda ALL=NOPASSWD:/usr/lib/dovecot/deliver dovelda ALL=NOPASSWD:/usr/bin/strace I'm using a Debian/Lenny system with amd64 and this package for Dovecot: # dpkg -l 'dovecot*' Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii dovecot-common 1:1.2.13-1~bpo secure mail server that supports mbox and ma ii dovecot-imapd 1:1.2.13-1~bpo secure IMAP server that supports mbox and ma Kind regards, --Toni++

2 2

[Dovecot] Sieve error on Quota full (Dovecot 2.0.3)
by Cassidy Larson 23 Sep '10

23 Sep '10

Just switched my storage boxes to 2.0.3 with Pigeonhole. Noticing for those that have quota fulls, my syslog is getting full of errors from sieve: dovecot: lda(user(a)host.com): Error: sieve: script /data/mail/host.com/user(a)host.com//.dovecot.sieve failed with unsuccessful implicit keep (user logfile /data/mail/host.com/user(a)host.com//.dovecot.sieve.log may reveal additional details) Checking the .dovecot.sieve.log I see: sieve: info: started log at Sep 22 00:38:11. error: msgid=<dovecot-1285137490-378260-0(a)storagebox.host.com>: failed to store into mailbox 'INBOX': Quota exceeded ( mailbox for user is full). Any way to suppress these quota full messages from filling up my logs and .dovecot.sieve.log ? I do like the .dovecot.sieve.log for debugging, but regular quota warnings seems excessive. Thanks, Cassidy

4 5

[Dovecot] Vpopmail support broken
by Matt Brookings 23 Sep '10

23 Sep '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 My apologies if I'm posting for information which has already been supplied to the list. I searched and all I found was people talking about the change in 2.0.3, but no details on the commit other than "I was tired of people telling me it crashes". We have not received any reports for the 5.4 or 5.5 branch of vpopmail causing crashes in Dovecot. That being said, if there is a problem, we would like to provide a fix. Again, if details on the specifics of the problem have been supplied, I apologize. Can anyone please provide me some reproduction details for Dovecot 2.0.3's vpopmail plugin compiled against vpopmail 5.4.30+ or 5.5.0? Removing the "vpopmail support broken" line from the configure script, compiling and running seemed to work short-term. I was able to authenticate against the vpopmail plugin. I tested with vpopmail 5.4.32 and 5.5.0 using the cdb authentication module. Thanks! - -- /* Matt Brookings <matt(a)inter7.com> GnuPG Key FAE0672C Software developer Systems technician Inter7 Internet Technologies, Inc. (815)776-9465 */ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkyaI6MACgkQIwet2/rgZyz8ugCeOnyz5DfV9FwrHfEmIroeznPv kZYAn0TnbEULiuZqJANoZsfhOahhsA0H =LHP4 -----END PGP SIGNATURE-----

4 12

[Dovecot] xz compression support
by Attila Nagy 22 Sep '10

22 Sep '10

Hello, Just wondering: Dovecot has gzip/bzip2 compression/decompression support. According to this: http://stephane.lesimple.fr/wiki/blog/lzop_vs_compress_vs_gzip_vs_bzip2_vs_… gzip and bzip2 aren't really useful together. While gzip can offer speed and a reasonable amount of compression ratio, bzip2 is slow, especially on decompression, which Dovecot does more frequently than compression (1 vs many). So: is it planned to include xz (liblzma) support? It would be useful especially for compressing old mails in the background (due to the resource intensity of the compression phase). Thanks,

2 1

[Dovecot] Panic: file mailbox-list-fs.c
by Burckhard Schmidt 22 Sep '10

22 Sep '10

Hi, I have dovecot 2.0.3. Mailboxes have been converted with dsync from mbox to maildir last week. There it was still version 2.0.2. A user "produces" now this error: imap(userx): Panic: file mailbox-list-fs.c: line 150 (fs_list_get_path): assertion failed: (mailbox_list_is_valid_pattern(_list, name)) Error: Raw backtrace: follows. And all other imap processes are closing down. dovecot starts again. master: Info: Dovecot v2.0.3 starting up Additional mail_location = maildir:~/maildir:INDEX=/addons/index/%u:CONTROL=~/control:LAYOUT=fs namespace { inbox = yes list = yes location = prefix = separator = / subscriptions = yes type = private } Are there charachters which are not allowed or is there a reached a maximal length? regards -- Mit freundlichen Gruessen --- Burckhard Schmidt

2 3

[Dovecot] "Documentation" link from http://www.dovecot.org/
by William Blunn 22 Sep '10

22 Sep '10

On the Dovecot home page http://www.dovecot.org/ we have a link "Documentation" which links to the Dovecot 1.x wiki ( http://wiki.dovecot.org/ ). There is a question mark in my mind as to whether that is a good idea considering as how the current stable version of Dovecot appears to be 2.0.x. In the Dovecot 1.x wiki, there is a pink stripe across the top of the page which says that the documentation is for Dovecot 1.x. It looks as though the intention was to make that prominent so as to guide visitors to the right documentation, and I think to a certain extent it may work. But I am wondering if perhaps the stripe could be too easily missed. People might start browsing around in the Dovecot 1.x wiki without it even occurring to them that there was a whole another wiki for 2.x. I have an idea: Perhaps the "Documentation" link on the home page could be re-worked to something like Documentation v2.x v1.x where "v2.x" and "v1.x" are links to the two wikis. This would make it obvious that there was different documentation available for v2.x and v1.x, and encourage visitors to choose the appropriate set. Bill

3 8

[Dovecot] service(imap-login): chiled ... killed with signal 11
by Burckhard Schmidt 22 Sep '10

22 Sep '10

Hi, dovecot 2.0.3 After closing the imap(s) connection dovecot crashes: imap-login: Info: Aborted login (no auth attempts): rip=... lip=... mpid=0 master: Error: service(imap-login): child 18636 killed with signal 11 (core not dumped - set service imap-login { drop_priv_before_exec=yes }) master: Warning: Killed with signal 15 (by pid=18643 uid=0 code=kill) It also happens if I only telnet to the imap(s) port and give the only command "1 logout". How can I get a dump for backtracing? With drop_priv_before_exec=yes I get a config error: doveconf: Fatal: Error in configuration file /usr/dovecot/etc/dovecot/dovecot.conf: service(imap-login): drop_priv_before_exec=yes can't be used with chroot As user I can login and work normaly but I have to reconnect after a differnet connection will be closed causing a dovecot crash. Additional information: Solaris 10, packages openssl, openldap by opencsw I had seen a similar error during login process already with an rc-version. Because opencsw offers only an older version of openssl I installed current versions of openssl and openldap, So it works again. Now both packaged are up to date at opencsw. So I would like using these packages again when I install dovecot. Any hints? -- Mit freundlichen Gruessen --- Burckhard Schmidt

2 1

[Dovecot] Sieve autoreply woes on test setup
by Mohit Chawla 22 Sep '10

22 Sep '10

Hi, I have been testing sieve in my setup with qmail-ldap and deliver on a LAN with an artificial domain name. Everything seems to be working as expected, except in cases when autoreplies (vacation, reject messages) need to be tested. The domain name is vmint, and dawnone is the hostname on which mail server is setup, so a users have address like cot@vmint, cute@vmint and dove@vmint * LDA Log* *cot is the user with the sieve vacation filter enabled* 2010-09-22 16:47:55 deliver(cot): Info: Loading modules from directory: /usr/lib/dovecot/modules/lda 2010-09-22 16:47:55 deliver(cot): Info: Module loaded: /usr/lib/dovecot/modules/lda/lib10_quota_plugin.so 2010-09-22 16:47:55 deliver(cot): Info: Module loaded: /usr/lib/dovecot/modules/lda/lib90_sieve_plugin.so 2010-09-22 16:47:55 deliver(cot): Info: auth input: uid=1011 2010-09-22 16:47:55 deliver(cot): Info: auth input: gid=1011 2010-09-22 16:47:55 deliver(cot): Info: auth input: home=/home/cot 2010-09-22 16:47:55 deliver(cot): Info: auth input: quota_rule=*:bytes=1000000 2010-09-22 16:47:55 deliver(cot): Info: Quota root: name= backend=maildir args= 2010-09-22 16:47:55 deliver(cot): Info: Quota rule: root= mailbox=* bytes=1000000 messages=0 2010-09-22 16:47:55 deliver(cot): Info: maildir: data=/home/cot/Maildir 2010-09-22 16:47:55 deliver(cot): Info: maildir++: root=/home/cot/Maildir, index=, control=, inbox=/home/cot/Maildir 2010-09-22 16:47:55 deliver(cot): Info: sieve: using sieve path for user's script: /home/cot/.dovecot.sieve 2010-09-22 16:47:55 deliver(cot): Info: sieve: opening script /home/cot/.dovecot.sieve 2010-09-22 16:47:55 deliver(cot): Info: sieve: executing compiled script /home/cot/.dovecot.sieve 2010-09-22 16:47:55 deliver(cot): Info: sieve: msgid=< e93c61e349a52559d3060b6530f6dd69.squirrel(a)192.168.1.137>: sent vacation response to <cute@vmint> 2010-09-22 16:47:55 deliver(cot): Info: Namespace : Using permissions from /home/cot/Maildir: mode=0700 gid=-1 2010-09-22 16:47:55 deliver(cot): Info: sieve: msgid=< e93c61e349a52559d3060b6530f6dd69.squirrel(a)192.168.1.137>: stored mail into mailbox 'INBOX' *failure notice message/bounce sent to the postmaster* Return-Path: <> Received: (qmail 5346 invoked for bounce); 22 Sep 2010 11:17:55 -0000 Date: 22 Sep 2010 11:17:55 -0000 From: MAILER-DAEMON@vmint To: "<>"@dawnone.vmint Subject: failure notice Hi. This is the qmail-send program at vmint. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <cute(a)vmint.vmint <http://192.168.1.137/squirrelmail/src/compose.php?send_to=cute%40vmint.vmint>>: Sorry, I couldn't find any host named vmint.vmint. (#5.1.2) --- Below this line is a copy of the message. Return-Path: <"<>"@dawnone.vmint> Received: (qmail 5344 invoked by uid 1011); 22 Sep 2010 11:17:55 -0000 X-Sieve: Dovecot Sieve 0.1.17 Message-ID: <dovecot-sieve-1285154275-554846-0@dawnone> Date: Wed, 22 Sep 2010 16:47:55 +0530 From: <cot(a)vmint.vmint <http://192.168.1.137/squirrelmail/src/compose.php?send_to=cot%40vmint.vmint>> To: <cute(a)vmint.vmint <http://192.168.1.137/squirrelmail/src/compose.php?send_to=cute%40vmint.vmint>> Subject: Not here In-Reply-To: <e93c61e349a52559d3060b6530f6dd69.squirrel(a)192.168.1.137 <http://192.168.1.137/squirrelmail/src/compose.php?send_to=e93c61e349a52559d…>> References: <e93c61e349a52559d3060b6530f6dd69.squirrel(a)192.168.1.137 <http://192.168.1.137/squirrelmail/src/compose.php?send_to=e93c61e349a52559d…>> Auto-Submitted: auto-replied (vacation) Precedence: bulk MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit This is an automated reply; I am away and will not be able to reply to you immediately.I will get back to you as soon as I return. *deliver is being called like this*: deliver -f $SENDER -d $USER where SENDER and USER are provided by qmail-ldap. So, am not sure what component in the chain is appending a .vmint to the existing domain name. Any input appreciated, thanks.

1 2

[Dovecot] Support for spaces in plaintext passwords?
by Simon 22 Sep '10

22 Sep '10

Hi! I have problems with my cellphone. It does not seem to quote the strings to the login command. I can logon using ie SquirrelMail but if i try to login using AndroidMail it just says "autentication failed". If i try maualy i get similar results. Changing password for test to "password-" a login test password- a OK Logged in. Changing password for test to "password " * OK Dovecot ready. a login test password #here i type "password ", but without "" a NO Authentication failed. Uppon examining squirrelmails comunication it sends login "test" "password " I will of cause file a bugreport that Android Mail should use quoted strings when using 'login' autentication as per rfc2060 (which seems to allow it but not demand it). But i wonder if it is possible to work around this issue in Dovecot somehow?

3 4

[Dovecot] Dovecot needs to be built with SSL support?
by ksrini9＠yahoo.com 22 Sep '10

22 Sep '10

I intend to use Dovecot without SSL. Hence, I built it without SSL support. When I am trying start Dovecot, I am getting the following error message. I have set ssl=no in 10-ssl.conf. Can anyone please let me know if it is possible to build and run Dovecot without SSL support? If it is, how can I overcome the following error message? Thanks a lot. Srini Sep 21 11:18:11 master: Info: Dovecot v2.0.3 starting up (core dumps disabled) Sep 21 11:18:11 ssl-params: Fatal: Dovecot built without SSL support Sep 21 11:18:11 master: Error: service(ssl-params): command startup failed, throttling

3 2

[Dovecot] Quota value *not* getting over written by ldap attr value, help ?
by Mohit Chawla 22 Sep '10

22 Sep '10

Hi, I am having trouble with the quota plugin with deliver. In the auth logs, I see that dovecot is able to get the attribute value just fine: *** Sep 21 17:49:30 dawnone dovecot: auth(default): ldap(cot,127.0.0.1): result: uid(user)=cot uidNumber(userdb_uid)=1011 gidNumber(userdb_gid)=1011 homeDirectory(userdb_home)=/home/cot mailQuotaSize(userdb_quota_rule=*:bytes=%$)=*:bytes=1000000 *** But the value defined in dovecot.conf does *not* get over written with the above value: *** 2010-09-21 17:49:37 deliver(cot): Info: Loading modules from directory: /usr/lib/dovecot/modules/lda 2010-09-21 17:49:37 deliver(cot): Info: Module loaded: /usr/lib/dovecot/modules/lda/lib10_quota_plugin.so 2010-09-21 17:49:37 deliver(cot): Info: Quota root: name=User quota backend=maildir args= 2010-09-21 17:49:37 deliver(cot): Info: Quota rule: root=User quota mailbox=* bytes=2500 messages=0 2010-09-21 17:49:37 deliver(cot): Info: maildir: data=/home/cot/Maildir 2010-09-21 17:49:37 deliver(cot): Info: maildir++: root=/home/cot/Maildir, index=, control=, inbox=/home/cot/Maildir 2010-09-21 17:49:37 deliver(cot): Info: Namespace : Using permissions from /home/cot/Maildir: mode=0700 gid=-1 2010-09-21 17:49:37 deliver(cot): Info: msgid=<2092295c098690fc157fca938d28b879.squirrel@dawnone>: save failed to INBOX: Quota exceeded (mailbox for user is full) 2010-09-21 17:49:37 deliver(cot): Info: msgid=<2092295c098690fc157fca938d28b879.squirrel@dawnone>: rejected: Quota exceeded (mailbox for user is full) 2010-09-21 17:49:37 deliver(cot): Info: msgid=<2092295c098690fc157fca938d28b879.squirrel@dawnone>: Return-Path missing, rejection reason: Quota exceeded (mailbox for user is full) *** My configuration files are as follows: **dovecot.conf** root@dawnone:~# dovecot -n # 1.2.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-3-686 i686 Debian squeeze/sid log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap ssl: no disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail mail_location: maildir:~/Maildir mbox_write_locks: fcntl dotlock lda: postmaster_address: dove@vmint mail_plugins: quota deliver_log_format: msgid=%m: %$ sendmail_path: /usr/lib/sendmail log_path: /var/log/ldaone info_log_path: /var/log/ldatwo debug: yes auth default: debug: yes passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: prefetch userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf plugin: quota: maildir:User quota quota_rule: *:bytes=2500 **dovecot-ldap.conf** hosts = dawnone.vmint uris = ldap://dawnone.vmint dn = cn=admin,dc=vmint dnpass = debian auth_bind = yes ldap_version = 3 base = ou=People,dc=vmint scope = subtree user_filter = (&(objectClass=posixAccount)(uid=%u)) pass_attrs = uid=user,userPassword=password,\ homeDirectory=userdb_home,uidNumber=userdb_uid,gidNumber=userdb_gid,mailQuotaSize=userdb_quota_rule=*:bytes=%$ user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid,mailQuotaSize=quota_rule=*:bytes=%$ Any help in this regard, appreciated. Thanks.

2 2

[Dovecot] expire_tool trouble + howto part sasl from 1.1.7 -> 2.0.1?
by Igor Kowalski 21 Sep '10

21 Sep '10

Hello! Let me smuggle 2 questions in 1 email: 1) I upgraded from 1.1.7 to 2.0.1, but couldn't get it to work, because the 'dovecot + postfix sasl howto' doesn't seem to be updated and the old sasl settings are incompatible with new version. How do I set up sasl with dovecot2 ? Is there any updated howto available? 2) In dovecot 1.1.7: my expire_plugin seems to work fine, new entries are correctly added to the dictionary, but the messages don't actually get expunged. expire_tool says: dovecot --exec-mail ext /usr/lib/dovecot/expire-tool --test Info: maildir: data=~/Maildir Info: maildir++: root=/home/virtual/<domain>/<user>/Maildir, index=, control=, inbox=/home/virtual/<domain>/<user>/Maildir Info: <user>@<domain>/Trash: timestamp 1285005106 (Mon Sep 20 18:51:46 2010 ) -> 1290102903 (Mon Sep 20 18:51:46 2010 ) Info: <user2>@<domain>/Trash: stop, expire time in future: Sat Nov 6 18:33:12 2010 Messages are only updated in the dictionary, but nothing is ever expunged. Any idea why? Output of dovecot -n: # 1.1.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.27.7-9-pae i686 openSUSE 11.1 (i586) protocols: imap imaps pop3 pop3s listen(default): *:143 listen(imap): *:143 listen(pop3): *:110 ssl_listen(default): *:993 ssl_listen(imap): *:993 ssl_listen(pop3): *:995 ssl_cert_file: /etc/ssl/certs/startssl.pem ssl_key_file: /etc/ssl/private/startssl.pem verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_location: maildir:~/Maildir mail_debug: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): quota imap_quota expire autocreate mail_plugins(imap): quota imap_quota expire autocreate mail_plugins(pop3): quota expire mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: mechanisms: plain login debug_passwords: yes passdb: driver: pam args: dovecot2 passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail plugin: quota: maildir quota_warning: storage=95%% /usr/local/bin/quota-warning.sh 95 quota_warning: storage=80%% /usr/local/bin/quota-warning.sh 80 expire: Trash 60 Trash.* 60 Spam 365 expire_dict: proxy::expire autocreate: Trash autocreate2: Spam autosubscribe: Trash autosubscribe2: Spam dict: expire: mysql:/etc/dovecot/dovecot-dict-expire.conf Create dict. table query: CREATE TABLE `expires` ( `mailbox` varchar(255) NOT NULL, `expire_stamp` int(11) NOT NULL, PRIMARY KEY (`mailbox`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 expire dict. conf: table = expires select_field = expire_stamp where_field = mailbox username_field = not_used And is there a point in using expire plugin without autocreate plugin? Because trash can be called wastebasket for example, and then it doesn't work. Spam can be called Junk, and again, it doesn't work. Any response to these queries would be greatly appreciated. Tadeusz Stelmach

2 1

[Dovecot] MD5 to CRAM-MD5 password conversion?
by David Jonas 21 Sep '10

21 Sep '10

We have a plethora of accounts for which we would like to enable CRAM-MD5 but their passwords are stored as MD5 hashes. Is there anything we can do? Can we take a linux MD5 hashed password (e.g. $1$fac330ee$wd6Tll...) and convert it to dovecot's CRAM-MD5 format (e.g. {CRAM-MD5}b3f297...)? Thanks!

2 1

[Dovecot] understand the struct message_header_line
by Alex Baule 21 Sep '10

21 Sep '10

Timo... Using the src/lib-mail/test-istream-header-filter.c as example, and following your tips to jump my desired header value, but i need to store the value from the Header filtered. In the Exemple, the callback is this: static void filter_callback(struct message_header_line *hdr, bool *matched, void *context ATTR_UNUSED) { if (hdr != NULL && hdr->name_offset == 0) { /* drop first header */ *matched = TRUE; } } What i try to understand is how the structs work, it's save the entire header or every line from header call the callback function ? hdr->name_offset is the size of elements in the struct ? (like a array of message_header_line) The void *context ATTR_UNUSED i can pass what i want to change ? like a pointer to a variable ?

2 1

[Dovecot] 2.0.3 doesn't start without SSL
by Attila Nagy 21 Sep '10

21 Sep '10

Hi, I've upgraded from 2.0.1 to 2.0.3 and while the former starts, the latter doesn't (the config is the same). It bails with: Sep 21 17:15:32 locsocs dovecot: ssl-params: Fatal: Dovecot built without SSL support Sep 21 17:15:32 locsocs dovecot: master: Error: service(ssl-params): command startup failed, throttling I have ssl=off.

2 2

[Dovecot] Dovecot with Virtual Domains
by Edmonds Namasenda 21 Sep '10

21 Sep '10

I plan to use two virtual domains and as many users for each domain with postfix, dovecot, squirrelmail, postfix admin, and mysql on openSuse 11.2. How best can you help me? I am going to use dovecot v2.0. Thank you. # Edmonds

3 5

[Dovecot] doveadm-expunge debug message clarifications
by LEVAI Daniel 21 Sep '10

21 Sep '10

Hi! I have some questions about doveadm-expunge's debug messages. # /usr/local/bin/doveadm -Dv expunge -u <user> mailbox 'sa.*' SAVEDBEFORE 6h doveadm(root): Debug: Loading modules from directory: /usr/local/lib/dovecot doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/lib10_quota_plugin.so doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/lib20_expire_plugin.so doveadm(root): Debug: Loading modules from directory: /usr/local/lib/dovecot/doveadm doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/doveadm/lib10_doveadm_expire_plugin.so doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so doveadm(root): Debug: expire: Searching only users listed in expire database ^^^^ That I don't understand. Does this mean that I can only specify users with the '-u' parameter from the list from the expire database, which is configured with: dict { expire = pgsql:/etc/dovecot/dovecot-sql.conf } If I don't specify a user with '-u', then nothing gets expunged, so it doesn't get the list of users from the expire database. doveadm(<user>): Debug: expunge: box=sa.spam uid=6376 doveadm(<user>): Debug: expunge: box=sa.spam uid=6377 doveadm(<user>): Debug: expunge: box=sa.spam uid=6378 doveadm(<user>): Debug: expunge: box=sa.spam uid=6379 doveadm(<user>): Debug: expunge: box=sa.spam uid=6380 doveadm(<user>): Debug: expunge: box=sa.spam uid=6381 doveadm(<user>): Debug: expunge: box=sa.spam uid=6382 doveadm(<user>): Debug: expunge: box=sa.spam uid=6383 doveadm(<user>): Error: net_connect_unix(/var/dovecot//dict) failed: Permission denied # ls -la /var/dovecot/dict srw------- 1 root wheel 0 Sep 21 09:47:00 2010 /var/dovecot/dict= service dict { chroot = client_limit = 1 drop_priv_before_exec = no executable = dict extra_groups = group = idle_kill = 0 s privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dict { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 4294967295 } What is trying to use that socket when I'm expunging mails? Am I supposed to grant my internal_user some privileges to that socket? While I got that error message, the expunge has succeeded. Thanks, Daniel -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

2 1

[Dovecot] tags disappear in Thunderbird
by Iv Ray 21 Sep '10

21 Sep '10

We have - Dovecot 1.0.15 (the default on Debian Lenny stable) Thunderbird 3.1.4 In our installation the Inbox is a mbox and the other folders are maildir. When we tag messages in Inbox, the tags disappear after a while. In the other folders they stay. I found two possible solutions suggested - 1. Set mbox_lazy_writes=no 2. Convert the Inbox to maildir What would be the best approach in your opinion? Would suggest not following the Debian Lenny stable version (1.0.15), but compiling the current stable Dovecot? Thank you very much, Iv

7 11

[Dovecot] Problem installing latest dovecot w vpopmail
by Joe ＠ 3ZZZ 21 Sep '10

21 Sep '10

Hello - I am trying to migrate my dovecot installation from an older server running version 1.x to the latest 2.0.3 When I run configure --with-vpopmail, it bombs pretty quick as follows: ./configure --with-vpopmail checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no configure: error: vpopmail support is broken. fix it or access its db another way. however, vpopmail seems to be working fine, i can add domains from vpopmail/bin/vadddomain and they show up in the database just fine. So why do I receive this error and how can i troubleshoot? thank you very much in advance, Joe

7 11

[Dovecot] configure error
by Andreas Kossack 21 Sep '10

21 Sep '10

Hi all, on my system ("AIX 6.1" with "xlc -q64") the "configure" script for "dovecot-2.0.2" breaks with: checking whether fd passing works... no configure: error: fd passing is required for Dovecot to work in config.log: configure:19524: ./conftest configure:19524: $? = 1 configure: program exited with status 1 It seems, that the last changes in "src/lib/fdpass.c" are the reason. ----------------------------------------------------------------------------- 109a110 > void *cmsg_data; 132c133,134 < *((int *) CMSG_DATA(cmsg)) = send_fd; --- > cmsg_data = CMSG_DATA(cmsg); > *(int *)cmsg_data = send_fd; 166a169 > void *cmsg_data; 196,197c199,202 < else < *fd = *((int *) CMSG_DATA(cmsg)); --- > else { > cmsg_data = CMSG_DATA(cmsg); > *fd = *(int *)cmsg_data; > } ----------------------------------------------------------------------------- Using the old version (from "src/lib/fdpass.c") make no trouble. -- Kind regards / Mit freundlichen Grüßen A. Kossack _______________________________________________________________________________ Andreas Kossack Andreas.Kossack(a)TU-Cottbus.De BTU Cottbus, Brandenburg, Germany, Walther-Pauer-Str.2, 03046 Cottbus http://wwwca.telesec.de/cgi-bin/caservice/Common/InstallRoot/DT-Root-CA-2.d… _______________________________________________________________________________ Diese Nachricht wurde aus 100% wiederverwerteten Elektronen erstellt. _______________________________________________________________________________

2 7

[Dovecot] permissions on auth-userdb Error: userdb lookup
by Dieter Knopf 20 Sep '10

20 Sep '10

Hello, first sorry for this question. I already found many threads about this problem including a thread in this list from August 2010, but nothing helped :( Here is the error: 2010-09-20 06:28:04 lda: Debug: Loading modules from directory: /usr/lib/dovecot/modules/ 2010-09-20 06:28:04 lda: Debug: Module loaded: /usr/lib/dovecot/modules//lib90_sieve_plugin.so 2010-09-20 06:28:04 lda: Error: userdb lookup: connect(/var/run/dovecot/auth-userdb) failed: Permission denied (euid=5000(vmail) egid=5000(vmail) missing +r perm: /var/run/dovecot/auth-userdb, euid is not dir owner) 2010-09-20 06:28:04 lda: Fatal: Internal error occurred. Refer to server log for more information. srw------- 1 root root 0 20. Sep 06:21 auth-userdb It worked fine with Dovecot 1.x, i use a static userdb. vmail(5000):vmail(5000) is my standard user/group for /home/vmail/ Here is the config: ===== listen = 92.198.xx.xx log_path = /var/log/dovecot.log log_timestamp = "%Y-%m-%d %H:%M:%S " mail_debug = yes mail_gid = 5000 mail_location = maildir:/home/vmail/%d/%n:INDEX=/home/vmail-indexes/%d/%n mail_privileged_group = vmail mail_uid = 5000 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { inbox = yes location = prefix = INBOX. separator = . type = private } passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { sieve = /home/vmail-sieve/%u/main.sieve sieve_before = /home/vmail/global/before.sieve sieve_dir = /home/vmail-sieve/%u/ sieve_global_dir = /home/vmail-sieve/global/ } protocols = imap service auth { unix_listener auth-master { mode = 0600 } } service imap-login { inet_listener imap { port = 0 } inet_listener imaps { address = 92.198.xx.xx } } service pop3-login { inet_listener pop3s { address = 92.198.xx.xx } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes driver = static } protocol lda { hostname = foo.net mail_plugin_dir = /usr/lib/dovecot/modules/ mail_plugins = sieve postmaster_address = postmaster(a)foo.net } ===== Any idea what's wrong? I already removed the permissions from the "service auth"-part (there was user/group=vmail) Thanks

3 8

[Dovecot] dovecot-2.0.3 - can not upload message, over quota
by LEVAI Daniel 20 Sep '10

20 Sep '10

Hi! I've upgraded to 2.0.3 from 1.2, and it is so far so good. I especially like the new doveadm tool. I have only one tiny problem: Every time I try to upload a message to the server (eg. to a 'Sent' folder, while sending a message), it fails with an error saying I'm over my quota. I'm using mutt, and this is the exact message I get in mutt: [OVERQUOTA] Quota exceeded (mailbox for user is full) Now this is not true, because dovecot-lda can save message to any of my folders, and doveadm says I have no quota (which is true): # doveadm quota get -u <user> Quota name Type Value Limit % User quota STORAGE 1075010 - 0 User quota MESSAGE 26750 - 0 Dovecot logs say nothing about this. Why is that error message then? (I must admit that I didn't try with another mail client.) I've tried to recalc the quota with doveadm but no luck. doveconf -n: # 2.0.3: /etc/dovecot/dovecot.conf # OS: OpenBSD 4.7 i386 default_internal_user = _dovecot default_login_user = _dovenull dict { expire = pgsql:/etc/dovecot/dovecot-sql.conf } info_log_path = /var/log/mail/dovecot.info listen = 127.0.0.1 log_path = /var/log/mail/dovecot.log mail_location = maildir:~/Maildir/ mail_plugins = quota expire passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { expire = sa.* 1 expire_dict = proxy::expire quota = maildir:User quota quota_rule = *:storage=100M quota_rule2 = Trash:storage=+50M } protocols = pop3 imap userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocol imap { mail_plugins = $mail_plugins imap_quota } protocol pop3 { mail_plugins = $mail_plugins pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol lda { deliver_log_format = msgid=%m, from=%f, subject=%s: %$ mail_plugins = $mail_plugins sieve sendmail_path = /usr/local/sbin/sendmail } TIA, Daniel -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

2 7

[Dovecot] v2.0.3 released
by Timo Sirainen 20 Sep '10

20 Sep '10

http://dovecot.org/releases/2.0/dovecot-2.0.3.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.3.tar.gz.sig * dovecot-lda: Removed use of non-standard Envelope-To: header as a default for -a. Set lda_original_recipient_header=Envelope-To to returns the old behavior. + Added support for reverse quota warnings (i.e. when quota goes back under the limit). This is enabled by adding '-' to beginning of quota_warning value. Based on patch by Jeroen Koekkoek. + dovecot-lda: Added lda_original_recipient_header setting, which is used for getting original recipient if -a isn't used. + dovecot-lda: Added -r parameter to specify final recipient address. (It may differ from original address for e.g. aliases.) + Maildir: uidlist file can now override message's GUID, making it possible for multiple messages in a mailbox to have the same GUID. This also fixes dsync's message conflict resolution. - dovecot-lda: If destination user isn't found, exit with EX_NOUSER, not EX_TEMPFAIL. - dsync: Fixed handling \Noselect mailboxes - Fixed an infinite loop introduced by v2.0.2's message parser changes. - Fixed a crash introduced by v2.0.2's istream-crlf changes.

4 6

[Dovecot] replace istream and unref the old one...
by Alex Baule 20 Sep '10

20 Sep '10

I Build a plugin, that do some stuffs with a email. To get the input istream, i use the "get_stream" function, like zlib does. I create a concat_stream, with the full_input[3]; struct istream *full_input[3]; //this like zlib input = imail->data.stream; //first input, using the input full_input[0] = i_stream_create_header_filter(input, HEADER_FILTER_EXCLUDE | HEADER_FILTER_NO_CR, exclude_headers, 1, filter_callback, imail); // second input from another file. full_input[1] = i_stream_create_fd(fd1, 0, TRUE); // finish the input full_input[2] = NULL; // recreating the stream imail->data.stream = i_stream_create_concat(full_input); //unref the old one. i_stream_unref(&input); return index_mail_init_stream(imail, hdr_size, body_size, stream_r); I do like zlib, but i got this errors in LOG. I Think it's because something in the unref, but o don't know what. Sep 20 10:48:04 brc dovecot: imap(alex(a)exemplo.com.br): Panic: file index-mail.c: line 1150 (index_mail_close): assertion failed: (!mail->data.destroying_stream) Sep 20 10:48:04 brc dovecot: imap(alex(a)exemplo.com.br): Error: Raw backtrace: /opt/addons/lib/dovecot/libdovecot.so.0 [0xb76201ee] -> /opt/addons/lib/dovecot/libdovecot.so.0 [0xb7620245] -> /opt/addons/lib/dovecot/libdovecot.so.0 [0xb761f8a6] -> /opt/addons/lib/dovecot/libdovecot-storage.so.0 [0xb76b568f] -> /opt/addons/lib/dovecot/libdovecot-storage.so.0(index_mail_free+0x25) [0xb76b7425] -> /opt/addons/lib/dovecot/libdovecot-storage.so.0(mail_free+0x12) [0xb76704b2] -> dovecot/imap(imap_fetch_deinit+0x89) [0x80583e9] -> dovecot/imap [0x805034d] -> dovecot/imap(cmd_fetch+0x45a) [0x805086a] -> dovecot/imap(cmd_uid+0x7f) [0x805514f] -> dovecot/imap [0x8055e8c] -> dovecot/imap [0x8055f3b] -> dovecot/imap(client_handle_input+0x3f) [0x805608f] -> dovecot/imap(client_input+0x5f) [0x8056a4f] -> /opt/addons/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x130) [0xb762cab0] -> /opt/addons/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) [0xb762b658] -> /opt/addons/lib/dovecot/libdovecot.so.0(master_service_run+0x2a) Sep 20 10:48:04 brc dovecot: master: Error: service(imap): child 11719 killed with signal 6 (core dumps disabled) Some One can help me ??

2 1

[Dovecot] Dovecot 2.0.3
by Matthias Quernheim 20 Sep '10

20 Sep '10

I upgraded today to from 1.2.12 to Dovecot 2.0.3 with the dbox format. I just figured out there are still mail in some users directories with the maildir format. These mail are not displayed at all. Nether with roundcube nor with Thunderbird. How could I convert the remaining maildir mails to dbox? Thanks Matthias

3 2

[Dovecot] send HUP when rotating log?
by LEVAI Daniel 20 Sep '10

20 Sep '10

Hi! Is it necessary for Dovecot2 to send it a SIGHUP when I rotate its log files? I'm asking because then I must turn off the 'shutdown_clients' option, because then every user gets disconnected while rotating the logs. Daniel -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

2 1

[Dovecot] Change in delivery directory during 2.0.2->2.0.3 upgrade
by Jeffrey Rice 19 Sep '10

19 Sep '10

In upgrading from 2.0.2 to 2.0.3, Dovecot deliver has started putting new emails into user@host/.user@host/new instead of user@host/new. This change was reversed by downgrading to 2.0.2, so it's due to the minor version change. Has anyone else seen this? dovecot.conf follows: # 2.0.0: /etc/dovecot/dovecot.conf # OS: Linux 2.6.27.2-xenU i686 Debian 5.0.5 ext3 auth_mechanisms = plain cram-md5 login digest-md5 dotlock_use_excl = yes login_greeting = IMAP ready. mail_fsync = never mail_location = maildir:/home/vmail/%u passdb { args = /etc/dovecot/dovecot-mysql.cnf driver = sql } plugin { auth_socket_path = /var/run/dovecot/auth-master sieve_global_path = /home/vmail/sieve/global.sieve } service auth { unix_listener /var/run/dovecot/auth-master { group = vmail mode = 0600 user = vmail } unix_listener /var/spool/postfix/private/dovecot-auth-client { group = postfix mode = 0660 user = postfix } user = root } service imap-login { client_limit = 256 process_limit = 128 process_min_avail = 4 service_count = 0 user = dovecot } service imap { vsz_limit = 70 } service pop3-login { client_limit = 256 process_limit = 128 process_min_avail = 4 service_count = 0 user = dovecot } service pop3 { vsz_limit = 70 } ssl_cert = </etc/dovecot/ssl/certs/dovecot_cert.pem ssl_cipher_list = ALL:!LOW ssl_key = </etc/dovecot/ssl/private/dovecot_key.pem userdb { driver = passwd } userdb { args = uid=5000 gid=5000 home=/home/vmail/%u driver = static } protocol imap { mail_plugin_dir = /usr/local/lib/dovecot/imap mail_plugins = } protocol lda { auth_socket_path = /var/run/dovecot/auth-master info_log_path = /home/vmail/dovecot-deliver.log log_path = /home/vmail/dovecot-deliver.log mail_plugins = sieve postmaster_address = postmaster(a)finity.org } deliver is invoked in postfix's master.cf using: dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/local/libexec/dovecot/deliver -f ${sender} -d ${recipient} -- Jeffrey Rice<jeffrice(a)finity.org>

3 3

[Dovecot] dovecot-2.0.3 : Am I missing anything here ?
by Dennis Clarke 18 Sep '10

18 Sep '10

I'm just asking if there is anything else that needs to be added at all. I seem to have everything linked in from soup to nuts but I want to be sure that a basic or essential feature is not being overlooked for forgotten : [titan] elfdump -d .libs/auth | grep NEED [0] NEEDED 0x3084 libdovecot.so.0 [1] NEEDED 0x3055 libpam.so.1 [2] NEEDED 0x306a libpthread.so.1 [3] NEEDED 0x3094 libkrb5.so.3 [4] NEEDED 0x30a1 libk5crypto.so.3 [5] NEEDED 0x30b2 libcom_err.so.3 [6] NEEDED 0x30c2 libldap-2.4.so.2 [7] NEEDED 0x30d3 libsasl2.so.2 [8] NEEDED 0x30e1 libgssapi_krb5.so.2 [9] NEEDED 0x30f5 libssl.so.0.9.8 [10] NEEDED 0x3105 libcrypto.so.0.9.8 [11] NEEDED 0x3118 liblber-2.4.so.2 [12] NEEDED 0x3129 libresolv.so.2 [13] NEEDED 0x3138 libgen.so.1 [14] NEEDED 0x3144 libpq.so.5 [15] NEEDED 0x314f libsqlite3.so.0 [16] NEEDED 0x315f libz.so [17] NEEDED 0x3167 libdl.so.1 [18] NEEDED 0x3172 libnsl.so.1 [19] NEEDED 0x317e libsocket.so.1 [20] NEEDED 0x318d libintl.so.8 [21] NEEDED 0x319a libiconv.so.2 [22] NEEDED 0x307a libc.so.1 [23] NEEDED 0x31a8 librt.so.1 [24] NEEDED 0x31b3 libmysqlclient.so.16 [35] VERNEED 0x8057770 [36] VERNEEDNUM 0x3 [titan] [titan] ldd .libs/auth libdovecot.so.0 => (file not found) libpam.so.1 => /usr/lib/libpam.so.1 libpthread.so.1 => /usr/lib/libpthread.so.1 libkrb5.so.3 => /opt/csw/lib/libkrb5.so.3 libk5crypto.so.3 => /opt/csw/lib/libk5crypto.so.3 libcom_err.so.3 => /opt/csw/lib/libcom_err.so.3 libldap-2.4.so.2 => /opt/csw/lib/libldap-2.4.so.2 libsasl2.so.2 => /opt/csw/lib/libsasl2.so.2 libgssapi_krb5.so.2 => /opt/csw/lib/libgssapi_krb5.so.2 libssl.so.0.9.8 => /opt/csw/lib/libssl.so.0.9.8 libcrypto.so.0.9.8 => /opt/csw/lib/libcrypto.so.0.9.8 liblber-2.4.so.2 => /opt/csw/lib/liblber-2.4.so.2 libresolv.so.2 => /usr/lib/libresolv.so.2 libgen.so.1 => /usr/lib/libgen.so.1 libpq.so.5 => /opt/csw/postgresql83/lib/i386/libpq.so.5 libsqlite3.so.0 => /opt/csw/lib/libsqlite3.so.0 libz.so => /opt/csw/lib/libz.so libdl.so.1 => /usr/lib/libdl.so.1 libnsl.so.1 => /usr/lib/libnsl.so.1 libsocket.so.1 => /usr/lib/libsocket.so.1 libintl.so.8 => /opt/csw/lib/libintl.so.8 libiconv.so.2 => /opt/csw/lib/libiconv.so.2 libc.so.1 => /usr/lib/libc.so.1 librt.so.1 => /usr/lib/librt.so.1 libmysqlclient.so.16 => /opt/csw/mysql51/lib/i386/mysql/libmysqlclient.so.16 libcmd.so.1 => /usr/lib/libcmd.so.1 libkrb5support.so.0 => /opt/csw/lib/libkrb5support.so.0 libintl.so.1 => /usr/lib/libintl.so.1 libgcc_s.so.1 => /opt/csw/lib/libgcc_s.so.1 libmp.so.2 => /usr/lib/libmp.so.2 libaio.so.1 => /usr/lib/libaio.so.1 libm.so.1 => /usr/lib/libm.so.1 libthread.so.1 => /usr/lib/libthread.so.1 That looks to be a massive list. I'm always worried that some "feature" is being forgotten by me. Any thoughts from the gurus ? -- Dennis

1 0

[Dovecot] mbox vs maildir
by Jim Pazarena 18 Sep '10

18 Sep '10

I've had clients 'request' nested folders, and it would seem that maildir is designed with that ability while with mbox it is difficult and.or impossible to implement (nested can be achieved; but not nested AND populated in each nest level). My question is, is one format 'better' than the other? It would take a fair bit of time to convert my system to maildir and I would want to feel comfortable that this would be a true 'upgrade' in abilities, rather than simply a change to accommodate nested folders. Thanks,

2 1

[Dovecot] moving 1.2.13 system to another hard drive
by Paul Scott 18 Sep '10

18 Sep '10

Hi, I am not very experienced with Dovecot (1,2,13) installed on Debian sid. I have just set up a new system on a new hard drive on the same computer. fetchmail is correctly putting mail in /var/mail/<username>. I have copied my entire Maildir directory from the old hard drive. I have made what changes I understood to dovecot.conf. Dovecot was working on the other drive even though I'm not completely sure how I got it working before. Any ideas for debugging this certainly simple problem for some of you. TIA, Paul Scott

3 4

[Dovecot] Maildir premission denied
by Omer Ahmed 18 Sep '10

18 Sep '10

Hi Sirs,I am using ubuntu OS, with dovecot and postfix, I can send emails receive email but not access them. I have the errorSep 17 21:21:31 myserver-name dovecot: POP3(virtualuser(a)mydomain.tld): stat(/var/mail/virtualuser(a)mydomain.tld) failed: Permission denied (euid=1001(upload) egid=1001(upload) missing +x permI don't know why it is using euid 1001, my var/mail folder uid:gid is 500:500and here are my settings:# 1.1.11: /etc/dovecot/dovecot.conf# OS: Linux 2.6.31-14-server x86_64 Ubuntu 9.10 ext3log_timestamp: %Y-%m-%d %H:%M:%Sprotocols: imap imaps pop3 pop3sdisable_plaintext_auth: nologin_dir: /var/run/dovecot/loginlogin_executable(default): /usr/lib/dovecot/imap-loginlogin_executable(imap): /usr/lib/dovecot/imap-loginlogin_executable(pop3): /usr/lib/dovecot/pop3-loginmail_privileged_group: mailmail_uid: 500mail_gid: 500mail_location: Maildir:/var/mail/%umail_executable(default): /usr/lib/dovecot/imapmail_executable(imap): /usr/lib/dovecot/imapmail_executable(pop3): /usr/lib/dovecot/pop3mail_plugin_dir(default): /usr/lib/dovecot/modules/imapmail_plugin_dir(imap): /usr/lib/dovecot/modules/imapmail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3auth default: passdb: driver: pam passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf Waiting for ur life saving replies

2 1

[Dovecot] Too stupid for sieve (former maildrop user)
by Dieter Knopf 18 Sep '10

18 Sep '10

Hello, I just migrated from Postfix/Courier/Maildrop to Postfix/Dovecot/Deliver/Sieve and don't unterstand the right syntax for sieve :( I searched and found many small examples and many links to the RFC, but nothing was usefull for me (or i didn't unterstand it) I installed the latest Dovecot-Sieve (hg). Examples from my maildrop config: # Filter FROM if($E =~ /name(a)domain1\.tld/) { to "$M/.Friends.Name1/" } # Filter FROM with OR if($E =~ /name1(a)domain1\.tld/ || $E =~ /name2(a)domain2\.tld/) { to "$M/.Friends.Name2/" } # Filter Mailinglists if (/^List-Id: .*<sylpheed\.sraoss\.jp>/) { to "$M/.ML.Sylpheed/" } # Filter FROM AND SUBJECT if($E =~ /fname(a)domain.tld/ && /^Subject: *foooooo/) { to "$M/.foo/" } # Filter TO if (hasaddr("name(a)domain.tld")) { to "$M/.foo/" } # Or something like this: if($E =~ /.*(a)facebookmail\.com/) { if (/^Subject: .*invited you to join the group/) { to "$M/.Facebook.Invites.Groups/" } if (/^Subject: .*invited you to the event/) { to "$M/.Facebook.Invites.Events/" } } $E was a shortcut for (adressmatching): ADDR=getaddr($MATCH) E=`echo $ADDR | sed 's/^M//'` $M was the path to the maildir, like /home/vmail/domain.tld/name Is that possible? Or is maildrop simple more powerful? Thank you :-) Dieter

3 11

[Dovecot] default ACL - in namespace's mail root directory ?
by Per Jessen 17 Sep '10

17 Sep '10

I have a namespace like this: namespace { type = private separator = / prefix = location = maildir:/var/ferrari/users/%d/%n:INDEX=/var/ferrari/indexes/3/4/%u:CONTROL=/var/ferrari/indexes/3/4/%u inbox = no list = yes subscriptions = yes } Where do I store "dovecot-acl" as the default ACL ? /Per Jessen, Zürich

3 8

Re: [Dovecot] dsync crash
by Timo Sirainen 17 Sep '10

17 Sep '10

On Wed, 2010-09-15 at 18:34 +0400, Василий Шоков wrote: > > namespace { > hidden = no > inbox = yes > location = maildir:~/mail/inbox/:INDEX=/var/dovecot_index/%u/inbox > prefix = .INBOX. Uh. Does this really work with IMAP clients? A namespace prefix must not start with hierarchy separator. My guess is that the crash happens because of it. I think I'll add code to give an error if it's tried.

2 8

[Dovecot] dsync to move from 1.2 to 2.0
by Daniel L. Miller 17 Sep '10

17 Sep '10

I'm not certain of the correct syntax for this - and I'm reluctant to risk my live data by experimenting. I've setup a 2.0.2 server on a virtual machine, and I want to copy a live account over to it for testing. Not that it should matter, but the 1.2 machine is using maildir and I want to give sdbox a try on 2.0.2. I'm assuming (dangerous, I know) I should run dsync on the new 2.0.2 machine, and connect remotely to the 1.2. If it matters, my usernames are complete mail addresses, i.e. myname(a)mydomain.com, and are stored as /var/mail/domain/name/Maildir. Does dsync perform an imap connection to the remote server to pull the mails? Or am I confusing this with imapsync? -- Daniel

2 1

[Dovecot] Processes remaining
by Andreas Kossack 17 Sep '10

17 Sep '10

Hi all, on my system ("AIX 6.1" 64bit) after "doveadm stop" there are some processes still alive: vmail 3997878 1 0 16:54:26 - 0:00 dovecot/imap dovenull 4915236 1 0 16:54:26 - 0:00 dovecot/imap-login root 6029330 1 0 16:54:20 - 0:00 dovecot/ssl-params root 6553702 1 0 16:52:01 - 0:00 dovecot/log vmail 6881392 1 0 16:54:21 - 0:00 dovecot/imap dovecot 7078140 1 0 16:52:23 - 0:00 dovecot/auth dovenull 7733396 1 0 16:54:20 - 0:00 dovecot/imap-login root 7864502 1 0 16:54:21 - 0:00 dovecot/auth -w root 9240650 1 0 16:54:20 - 0:00 dovecot/config dovecot 12189718 1 0 16:52:01 - 0:00 dovecot/anvil After some minutes I can see less than before: root 6029330 1 0 16:54:20 - 0:00 dovecot/ssl-params root 6553702 1 0 16:52:01 - 0:00 dovecot/log dovecot 12189718 1 0 16:52:01 - 0:00 dovecot/anvil But these seem to be permanent. Restarting dovecot there is an error sometimes logged: Sep 9 17:08:17 Buckow local3:err|error dovecot: master: Error: service(auth): Socket already exists: /var/run/dovecot/auth-login And - some restarts later: root 3997884 1 0 17:07:21 - 0:00 dovecot/ssl-params root 6029330 1 0 16:54:20 - 0:00 dovecot/ssl-params root 6226004 13172840 0 17:14:04 - 0:00 dovecot/config root 6553702 1 0 16:52:01 - 0:00 dovecot/log dovecot 6881398 1 0 17:06:13 - 0:00 dovecot/anvil root 7733432 13172840 0 17:14:04 - 0:00 dovecot/log root 7864522 1 0 17:06:13 - 0:00 dovecot/log dovecot 7995430 13172840 0 17:14:04 - 0:00 dovecot/anvil dovecot 9240682 1 0 17:11:20 - 0:00 dovecot/anvil root 9306298 1 0 17:13:28 - 0:00 dovecot/ssl-params root 9371814 1 0 17:11:20 - 0:00 dovecot/log dovecot 12189718 1 0 16:52:01 - 0:00 dovecot/anvil root 13172840 1 0 17:14:04 - 0:00 /usr/sbin/dovecot What's wrong? -- Kind regards / Mit freundlichen Grüßen A. Kossack _______________________________________________________________________________ Andreas Kossack Andreas.Kossack(a)TU-Cottbus.De BTU Cottbus, Brandenburg, Germany, Walther-Pauer-Str.2, 03046 Cottbus http://wwwca.telesec.de/cgi-bin/caservice/Common/InstallRoot/DT-Root-CA-2.d… _______________________________________________________________________________ Diese Nachricht wurde aus 100% wiederverwerteten Elektronen erstellt. _______________________________________________________________________________

2 5

[Dovecot] sent-mail
by dhottinger＠harrisonburg.k12.va.us 17 Sep '10

17 Sep '10

Im trying to nail down an issue with some users sent-mail. I have had a few users complaining that their emails are not being copied to their sent-mail folder. Im not sure how widespread it is, mainly because most people dont check their sent-mail. Im running Dovecot version 1.0.7, and yes I know its outdated, but I have had zero problems thus far. Im grepping through my logfiles and dont see any error messages to indicate that there are any issues anywhere on the mailserver. Has anyone else seen any issues with sent-mail not being copied? If checked permissions on the folders and they look correct. thanks, ddh -- Dwayne Hottinger Network Administrator Harrisonburg City Public Schools "Everything should be made as simple as possible, but not simpler." -- Albert Einstein "The hottest places in Hell are reserved for those who, in times of moral crisis, preserved their neutrality." -- Dante

3 4

[Dovecot] dsync - how to speed up
by Burckhard Schmidt 17 Sep '10

17 Sep '10

Hi, I have converted some mbox mailboxes to maildir. Inbox and folders had been cpopied before into a separate directories "old-home" and old-inbox onto the new server (dovecot 2.0.2. with fix hg.dovecot.org/dovecot-2.0/rev/14a6e526900d) dsync -v -u user mirror mbox:/old-homehome/~user:INBOX=/old-inbox/user It works but it lasts "very long" time. For one mailbox with 2,4 Gb and nearly 200.000 emails it lasts 100 minutes. I would like to migrate 1.500 Gb - not possible in that way I think. Are there any possibilities making it faster? May be not to generate indices, ..., which could be done later during a first access by the user? Is it possible to run several dsync commands at the same time, of course each one for a different user? (Ressources cpu and I/O system are available.) -- Mit freundlichen Gruessen --- Burckhard Schmidt

2 1

[Dovecot] fts plugin - purpose of get_last_uid() ?
by Per Jessen 17 Sep '10

17 Sep '10

It looks like the uid returned is only used as an indication of whether the maildir is fully indexed or not, is that correct? In my setup, the index is built externally and will _always_ be up-to-date. Getting the last uid would mean running a query, which, whilst inexpensive, seems unnecessary if my understanding of the purpose of get_last_uid() is correct. thanks Per Jessen, Zürich

2 4

[Dovecot] fts_squat hanging on some messages
by Henning Rohlfs 17 Sep '10

17 Sep '10

Hello, I recently upgraded to dovecot 2.0.2 (on gentoo ~amd64) and now fts_squat's index building seems to hang for some of my mailboxes. The imap process gets stuck at 100% cpu usage and dovecot.index.search is never touched. I traced the problem to a message (attached) for one of the problematic mailboxes. Also attached are a full backtrace and the output of dovecot -n. The problem is reproducible: step 1) /usr/libexec/dovecot/imap step 2) . select Junk step 3) . search body sometext

2 2

[Dovecot] Can solaris sendmail use dovecot lda
by Jürgen Obermann 17 Sep '10

17 Sep '10

Hello, on a Solaris 9 system with dovecot 1.2.14 installed I want to replace the sendmail local delivery agent 'mail.local' with the dovcot LDA. The wiki page http://wiki.dovecot.org/LDA/Sendmail did not really help me, because there are only linux specific tipps I am not able to apply to solaris sendmail.cf. So how can I tell solaris sendmail to use dovecots LDA instead of mail.local? Greetings, Jürgen Obermann -- Hochschulrechenzentrum der | Mail: Juergen.Obermann(a)hrz.uni-giessen.de Justus-Liebig-Universitaet | WWW: http://www.uni-giessen.de/obermann/ Heinrich-Buff-Ring 44 | Tel: 0641-99-13054 (0641-99-13001) D-35392 Giessen, Germany | Fax: 0641-99-13009 ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

2 1

[Dovecot] dsync: mbox to maildir
by Burckhard Schmidt 17 Sep '10

17 Sep '10

Hello, I started converting INBOX and folder from mbox to maildir. The old folders comming from Dovecot 1.0.13 with a mail_location mbox:%h:INBOX=/inbox/%u. The new instalation on a different server is Dovecot 2.0.1, mail-location maildir:~/maildir:INDEX=/addons/index/%u: CONTROL=~/control:LAYOUT=fs No user has logged in before. I have copied tho old Inbox and folders into /mailstore1/import-inbox and /mailstore1/import-home to the new server. my dsync command dsync -v -u account mirror mbox:/mailstore1/import-home/~account:INBOX=/mailstore1/import-inbox/account This works fine. But there are some problems too: 1. autocreate The plugin autocreate = AutoCleanSpam is activated for lda and imap. There is no user with such folder. dsync ceates two: dsync(account): Info: AutoCleanSpam: only in source dsync(account): Info: AutoCleanSpam: only in dest I saw AutoCleanSpam and AutoCleanSpam_73fc7f01efa3804cb4290000b68194d6, both empty. I deletet it with doveadm mailbox delete -u account -s "AutoCleanSpam_73fc7f01efa3804cb4290000b68194d6" Furthermore I have had before autocreate = Sent ( and some more) If the user has such a folder then again two folders are created, "Sent" which is empty and "Sent_any characters" like above. This folder contains the emails of the old folder Sent. 2. missing skip_broken_mailboxes, skip_dotdirs dsync reports errors like Error: Failed to sync mailbox xyz: Mailbox isn't a valid mbox file After a few minutes dsync stops. Or a file like .mlbxlsttmp causes the same error. I remembered my tests with convert-tool (dovecot-V1.2.12) and could use skip_broken_mailboxes skip_dotdirs. That was fine and I'm missing it. I will have to convert several thousands of users. May be I have to clean their folders before? 3. empty folder I have seen some empty folders. These have not been generated by dsync. Some user could missing them? On ballance dsync converts 10 Gb of mbox to maildir successfully. -- Regards - Burckhard Schmidt

2 2

[Dovecot] (Single instance) attachment storage
by Timo Sirainen 17 Sep '10

17 Sep '10

Now that v2.0.0 is only waiting for people to report bugs (and me to figure out how to fix them), I've finally had time to start doing what I actually came here (Portugal Telecom/SAPO) to do. :) The idea is to have dbox and mdbox support saving attachments (or MIME parts in general) to separate files, which with some magic gives a possibility to do single instance attachment storage. Comments welcome. Reading attachments ------------------- dbox metadata would contain entries like (this is a wrapped single line entry): X1442 2742784 94/b2/01f34a9def84372a440d7a103a159ac6c9fd752b 2744378 27423 27/c8/a1dccc34d0aaa40e413b449a18810f600b4ae77b So the format is: "X" 1*(<offset> <byte count> <link path>) So when reading a dbox message body, it's read as: offset=0: <first 1442 bytes from dbox body> offset=1442: <next 2742784 bytes from external file> offset=2744226: <next 152 bytes from dbox body> offset=2744378: <next 27423 bytes from external file> offset=2744378 27423: <the rest from dbox body> This is all done internally by creating a single istream that lazily opens the external files only when data is actually tried to be read from that part of the message. The link paths don't have to be in any specific format. In future perhaps it can recognize different formats (even http:// urls and such). Saving attachments separately ----------------------------- Message MIME structure is being parsed while message is saved. After each MIME part's headers are parsed, it's determined if this part should be stored into attachment storage. By default it only checks that the MIME part isn't multipart/* (because then its child parts would contain attachments). Plugins can also override this. For example they could try to determine if the commonly used clients/webmail always downloads and shows the MIME part when opening the mail (text/*, inline images, etc). dbox_attachment_min_size specifies the minimum MIME part size that can be saved as an attachment. Anything smaller than that will be stored normally. While reading a potential attachment MIME part body, it's first buffered into memory until the min. size is reached. After that the attachment file is actually created and buffer flushed to it. Each attachment filename contains a global UID part, so that no two (even identical) attachments will ever contain the same filename. But there can be multiple attachment storages in different mount points, and each one could be configured to do deduplication internally. So identical attachments should somehow be stored to same storage. This is done by taking a hash of the body and using a part of it as the path to the file. For example: mail_location = dbox:~/dbox:ATTACHMENTS=/attachments/$/$ Each $ would be expanded to 8 bits of the hash in hex (00..ff). So the full path to an attachment could look like: /attachments/04/f1/5ddf4d05177b3b4c7a7600008c4a11c1 Sysadmin can then create /attachment/00..ff as symlinks to different storages. Hashing problems ---------------- Some problematic design decisions: 1) Hash is taken from hardcoded first n kB vs. first dbox_attachment_min_size bytes? + With first n kB, dbox_attachment_min_size can be changed without causing duplication of attachments, otherwise after the change the same attachment could get a hash to a different storage than before the change. - If n kB is larger than dbox_attachment_min_size, it uses more memory. - If n kB is determined to be too small to get uniform attachment distribution to different storages, it can't be changed without recompiling. 2) Hash is taken from first n bytes vs. everything? + First n bytes are already read to memory anyway and can be hashed efficiently. The attachment file can be created without wasting extra memory or disk I/O. If everything is hashed, the whole attachment has to be first stored to memory or to a temporary file and from there written to final storage. - With first n bytes it's possible for an attacker to generate lots of different large attachments that begin with the same bytes and then overflow a single storage. If everything is hashed with a secure hash function and a system-specific secret random value is added to the hash, this attack isn't possible. I'm thinking that even though taking a hash of everything is the least efficient option, it's the safest option. It's pretty much guaranteed to give a uniform distribution across all storages, even against intentional attacks. Also the worse performance isn't probably that noticeable, especially assuming a system where local disk isn't used for storing mails, and the temporary files would be created there. Single instance storage ----------------------- All of the above assumes that if you want a single instance storage, you'll need to enable it in your storage. Now, what if you can't do that? I've been planning on making all index/dbox code to use an abstracted out simple filesystem API rather than using POSIX directly. This work can be started by making the attachment reading/writing code use the FS API and then create a single instance storage FS plugin. The plugin would work like: open(ha/sh/hash-guid): The destination storage is in ha/sh/ directory, so a new temp file can be created under it. The hash is part of the filename to make unlink() easier to handle. Since the hash is already known at open() time, look up if hashes/<hash> file exists. If it does, open it. write(): Write to the temp file. If hashes/ file is open, do a byte-by-byte comparison of the inputs. If there's a mismatch, close the hashes/ file and mark it as unusable. finish(): a) If hashes/ file is still open and it's at EOF, link() it to our final destination filename and delete the temp file. If link() fails with ENOENT (it was just expunged), goto b. If link() fails with EMLINK (too many links), goto c. b) If hashes/ file didn't exist, link() the temp file to the hash and rename() it to the destination file. c) If the hashed file existed but wasn't the same, or if link() failed with EMLINK, link() our temp file to a second temp file and rename() it over the hashes/ file and goto a. unlink(): If hashes/<hash> has the same inode as our file and the link count is 2, unlink() the hash file. After that unlink() our file. One alternative to avoid using <hash> as part of the filename would be for unlink() to read the file and recalculate its hash, but that would waste disk I/O. Another possibility would to be to not unlink() the hashes/ files immediately, but rather let some nightly cronjob to stat() through all of the files and unlink() the ones that have link count=1. This could be wastefully inefficient though. Yet another possibility would be for the plugin to internally calculate the hash and write it somewhere. If it's at the beginning of the file, it could be read from there with some extra disk I/O. But is it worth it?.. Extra features -------------- The attachment files begin with an extensible header. This allows a couple of extra features to reduce disk space: 1) The attachment could be compressed (header contains compressed-flag) 2) If base64 attachment is in a standardized form that can be 100% reliably converted back to its original form, it could be stored decoded and then encoded back to original on the fly. It would be nice if it was also possible to compress (and decompress) attachments after they were already stored. This would be possible, but it would require finding all the links to the message and recreating them to point to the new message. (Simply overwriting the file in place would require there are no readers at the same time, and that's not easy to guarantee, except if Dovecot was entirely stopped. I also considered some symlinking schemes but they seemed too complex and they'd also waste inodes and performance.) Code status ----------- Initial version of the attachment reading/writing code is already done and works (lacks some error handling and probably performance optimizations). The SIS plugin code is also started and should be working soon. This code is very isolated and can't cause any destabilization unless it's enabled, so I'm thinking about just adding it to v2.0 as soon as it works, although the config file comments should indicate that it's still considered unstable.

5 31

[Dovecot] Dovecot upgrades break Blackberry instant email (BIS)
by interfaSys sàrl 17 Sep '10

17 Sep '10

Hello, Just like when upgrading to 1.2, upgrading to 2.0.1 confuses RIM's BIS servers and users don't have instant email anymore on their Blackberrys. Under normal conditions, the BIS servers keep one open connection per email account with Dovecot. They're using IMAP IDLE to monitor changes and push them to devices very quickly. After an upgrade, all changes. The BIS servers can't maintain an idling connection anymore, they just poll the Dovecot server when they feel like it (every 2-15 minutes). There is one way to fix this on the devices: The users have to re-create the email account. I don't find this very convenient and was wondering if there was something that could be done on the Dovecot side? Last time it happened, I tried clearing the indexes and resetting file permissions, but nothing helped. Cheers, Olivier

5 14

[Dovecot] SSL stops working after server upgrade
by "Ing. Daniel Rozsnyó" 17 Sep '10

17 Sep '10

Hello, after an upgrade of the dovecot server, I can not use SSL connections. Can you help me solving the issue? When googling for the error, there is an opinion that the client is broken (in my case Thunderbird, 3.1.3), but I rather see the issue in the server, because I was upgrading my gentoo box by hand, and the secure imap stopped to work after that. Is there a more verbose SSL logging than the default verbose ssl = yes? It's output is attached below. Also, maybe only a configuration detail is missing, since with this version of dovecot, the configuration files were broken into several smaller files, but for my first look they contained the options I had used before. Thanks. Sep 16 23:12:25 [dovecot] master: Dovecot v2.0.2 starting up (core dumps disabled) Sep 16 23:12:29 [dovecot] imap-login: Warning: SSL: where=0x10, ret=1: before/accept initialization [192.168.77.202] Sep 16 23:12:29 [dovecot] imap-login: Warning: SSL: where=0x2001, ret=1: before/accept initialization [192.168.77.202] Sep 16 23:12:29 [dovecot] imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv2/v3 read client hello A [192.168.77.202] Sep 16 23:12:29 [dovecot] imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 read client hello A [192.168.77.202] Sep 16 23:12:29 [dovecot] imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write server hello A [192.168.77.202] Sep 16 23:12:29 [dovecot] imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write certificate A [192.168.77.202] Sep 16 23:12:29 [dovecot] imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write key exchange A [192.168.77.202] Sep 16 23:12:29 [dovecot] imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write server done A [192.168.77.202] Sep 16 23:12:29 [dovecot] imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 flush data [192.168.77.202] Sep 16 23:12:29 [dovecot] imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv3 read client certificate A [192.168.77.202] - Last output repeated twice - Sep 16 23:12:30 [dovecot] imap-login: Warning: SSL alert: where=0x4004, ret=554: fatal bad certificate [192.168.77.202] Sep 16 23:12:30 [dovecot] imap-login: Warning: SSL failed: where=0x2002: SSLv3 read client certificate A [192.168.77.202] Sep 16 23:12:30 [dovecot] imap-login: Disconnected (no auth attempts): rip=192.168.77.202, lip=192.168.77.201, mpid=0, TLS handshaking: SSL_accept() failed: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate: SSL alert number 42

2 2

[Dovecot] [DC2.x ]pop3-login seg faults when compiled with gcc 4.5.2 and gold
by interfaSys sàrl 16 Sep '10

16 Sep '10

Hello, On FreeBSD, Dovecot 2.0.1 compiles fine with gcc45 and the other services have no problem, but even without any optimizations (CFLAGS) at all, pop3-login seg faults when a user tries to connect to Dovecot using POP3. As this is not the only application that has a problem with the latest version of gcc (mod_php), there may be nothing that can be done on the Dovecot side, but I thought I would mention it, in case it was due to some bug in the pop3-login code. Cheers, Olivier

2 12

[Dovecot] imap processing spinning on the CPU
by Daniel J. Luke 16 Sep '10

16 Sep '10

Version: 2.0.2 OS: Mac OS X 10.5.8 IMAP Client: Apple Mail.app on 10.5.8 Since upgrading to 2.0.2 I've noticed one user ends up with 4-5 imap processes all using as much CPU as they can get. I know of one other person who is seeing this on a FreeBSD server (that person moved back to dovecot 1.2 which 'solved' the problem there). I didn't notice anything in the list archive about this, but maybe I missed it. (gdb) bt full #0 0x9534c2a8 in memchr () No symbol table info available. #1 0x001ef220 in parse_next_body_to_boundary () No symbol table info available. #2 0x001f02a8 in message_parser_parse_next_block () No symbol table info available. #3 0x0013c1cc in index_mail_cache_parse_continue () No symbol table info available. #4 0x0015c634 in mbox_save_body () No symbol table info available. #5 0x0015ca14 in mbox_save_continue () No symbol table info available. #6 0x000ecc58 in mail_storage_copy () No symbol table info available. #7 0x000f5b80 in mailbox_copy () No symbol table info available. #8 0x00003a10 in cmd_copy (cmd=0x80e820) at cmd-copy.c:66 search_ctx = (struct mail_search_context *) 0x403900 src_trans = (struct mailbox_transaction_context *) 0x403230 srcset_ctx = { str = 0x282d0, first_uid = 0, last_uid = 4294967295 } save_ctx = (struct mail_save_context *) 0x0 mail = (struct mail *) 0x81bc20 src_uidset = (string_t *) 0x282d0 copy_count_r = (unsigned int *) Cannot access memory at address 0x0 -- Daniel J. Luke +========================================================+ | *---------------- dluke(a)geeklair.net ----------------* | | *-------------- http://www.geeklair.net -------------* | +========================================================+ | Opinions expressed are mine and do not necessarily | | reflect the opinions of my employer. | +========================================================+

3 3

[Dovecot] Moving from MBOX to Maildir or DBox ?
by Frank Bonnet 16 Sep '10

16 Sep '10

Hello Actually we use MBOX format for all our IMAP access but users complain they cannot create subfolders in imap folders, of course they cannot because of MBOX format ... I need gurus advices on changing mailbox format Maildir of Dbox ? What would be the safest way to go ? Note : we extensively use Thunderbird here. Thanks

4 3

[Dovecot] dovecot as exchange server?
by Jacek Osiecki 16 Sep '10

16 Sep '10

Hi, This might be a stupid question, since my knowledge about Exchange is really poor... Since I've got iPhone, I have noticed that IMAP mailbox support is quite crippled in this device - in comparison to Exchange mailboxes... As I assume that it would be easier to convince Bill Gates to install linux than to convince Steve Jobs to change anything in his "perfect phone", I started searching for something that could serve emails similarly to Exchange. Since gmail provides Exchange access, and they definitely don't run a single huge MS Exchange server, I assume that it is somehow possible to implement Exchange protocols - or am I wrong? So, finally - if it is possible to use Exchange protocol, would there be any plans for implementing it in dovecot? Best regards, -- Jacek Osiecki joshua(a)ceti.pl GG:3828944

6 8

[Dovecot] dsync mirror duplicates problem
by Waldemar W. 16 Sep '10

16 Sep '10

Im trying to sync 2 mailserver with dsync mirror functionality. Problem occurs when mails arrive in the same folder on both sides then dsync sometimes runs into problems and duplicates that entrys on both side(2mails then with same content). After running again the same happens again(now 4 mails with same content on every side). And then duplicates this mails on both sides on every run :( Anyone with same problem or is something that could cause this? I tried dsync with and without -f option but no change. Im running dovecot 2.0.1 together with dovecot sieve (latest hg version). thanks, Waldemar

2 3

[Dovecot] Dovecot2 and mdbox problem
by Michael Grosseck 16 Sep '10

16 Sep '10

Hello, I've just installed Dovecot from the http://xi.rename-it.nl/debian/ repository. But I have a problem with the mdbox Format. When the home folder is empty Dovecot should create the folder structure if the first mail arrived or the user logs in the first time. But I get following error: Sep 16 12:30:41 smtp dovecot: lmtp(31244): Connect from local Sep 16 12:30:41 smtp dovecot: lmtp(31244, info(a)example.de) Error: file_dotlock_open() failed with file /var/mail/es030107p1/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index.log: No such file or directory Sep 16 12:30:41 smtp dovecot: lmtp(31244, info(a)example.de) Error: Opening INBOX failed: Mailbox doesn't exist: INBOX Sep 16 12:30:41 smtp dovecot: lmtp(31244, info(a)example.de) 0ZQgDbkNkkwMegAA00WXAw: msgid=<20100916123041.4781A4F4138(a)smtp.example.de>: save failed to INBOX: Mailbox doesn't exist: INBOX Sep 16 12:30:41 smtp dovecot: lmtp(31244, info(a)example.de) Error: BUG: Saving failed to unknown storage Sep 16 12:30:41 smtp dovecot: lmtp(31244): Disconnect from local: Client quit Also if I try to create a mailbox by hand I get a similar error. doveadm(info(a)example.de): Error: file_dotlock_open() failed with file /var/mail/es030107p1/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index.log: No such file or directory doveadm(info(a)example.de): Error: Can't create mailbox INBOX: Internal error occurred. Refer to server log for more information. [2010-09-16 14:07:42] If I now create the dbox-Mails directory and the dovecot.index.log by hand and make a doveadm -v force-resync -u info(a)example.de INBOX everthing is alright. Also I can not create a new IMAP-folder with Thunderbird. It seems Dovecot forgets to create the dbox-Mails directory and the dovecot.index.log file. Now my config: # 2.0.2 (eb5adb193064): /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-xen-amd64 x86_64 Debian 5.0.6 auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login auth_verbose = yes auth_verbose_passwords = plain base_dir = /var/run/dovecot/ disable_plaintext_auth = no first_valid_gid = 10000 first_valid_uid = 10000 last_valid_gid = 10000 last_valid_uid = 10000 login_greeting = Webfixx Dovecot ready. mail_debug = yes mail_gid = vmail mail_location = mdbox:%h/mdbox mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } postmaster_address = liox(a)elso.mine.nu service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } user = vmail } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql }

2 2

[Dovecot] Execution of external commands from Pigeonhole sieve
by Andrés Yacopino 16 Sep '10

16 Sep '10

Does anybody knows if there are some method to call an externall command from sieve? Is xexec plugin is what i am looking for? Is it avaiable for Dovecot 1.2? __ <http://wiki.dovecot.org/Plugins/xexec>I am using dovecot 1.2 and sieve 0.1.17. I want to call ripmime from sieve to save attchments from mails in a user account. Thanks for your feedback, Greetings, -- Andrés Fernando Yacopino

2 1

[Dovecot] Deliver/LDA, no data in the logs, even with debug set (dovecot + qmail-ldap), and sieve issue
by Mohit Chawla 16 Sep '10

16 Sep '10

Hi, I am trying to integrate sieve with qmail-ldap. I can't get it to work, and deliver isn't logging anything to the log files (or syslog, if selected). Hence I have got no way to diagnose the problem. Any help appreciated. *root@debtwo:~# dovecot --version* 1.2.13 *root@debtwo:~# dovecot -n* # 1.2.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-3-686 i686 Debian squeeze/sid log_path: /dev/stderr protocols: imap imaps pop3 pop3s login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:~/Maildir mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 lda: postmaster_address: mirko(a)deb.vm hostname: debtwo.deb.vm sendmail_path: /usr/lib/sendmail mail_plugins: sieve mail_plugin_dir: /usr/lib/dovecot/modules/lda log_path: /var/log/ldaone.log info_log_path: /var/log/ldatwo.log debug: yes auth default: passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: prefetch userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf plugin: sieve: ~/.dovecot.sieve *root@debtwo:~# grep -v '^ *$#.*$\?$' /etc/dovecot/dovecot-ldap.conf* hosts = debtwo.deb.vm uris = ldap://debtwo.deb.vm ldaps://debtwo.deb.vm dn = cn=admin,dc=deb,dc=vm dnpass = secret auth_bind = yes ldap_version = 3 base = ou=People,dc=deb,dc=vm scope = subtree user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid user_filter = (&(objectClass=posixAccount)(uid=%u)) pass_attrs = uid=user,userPassword=password,\ homeDirectory=userdb_home,uidNumber=userdb_uid,gidNumber=userdb_gid user_attrs = homeDirectory=home, uidNumber=uid, gidNumber=gid * root@debtwo:~# cat /home/mirko/.dovecot.sieve * require ["reject"]; reject "blah"; * root@debtwo:~# ls -l /var/log/lda** -rw-rw-rw- 1 root root 0 Sep 16 16:49 /var/log/ldaone.log -rw-rw-rw- 1 root root 0 Sep 16 16:49 /var/log/ldatwo.log

2 4

[Dovecot] dovecot 2.02 expire stopped working
by Robert Schetterer 16 Sep '10

16 Sep '10

Hi Timo, the expire plugin suddenly stopped working ( updating from betas ), no problem found in the logs doveadm expunge -A mailbox Trash savedbefore 1m works as expected i have no idea why nothing gets logged only loading the plugin is shown -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

1 1

[Dovecot] Problems with dovecot-2.0.2+dovecot-2.0-pigeonhole-0.2.0
by Jose Luis Faria 16 Sep '10

16 Sep '10

Hello, I have installed the dovecot-2.0.2 and dovecot-2.0-pigeonhole-0.2.0 but if I try to use sieve I get this error. I can't find any help in documentation. Any ideas? thanks ----------------------- /usr/local/sbin/dovecot start doveadm(root): Error: dlopen(/usr/local/lib/dovecot /lib90_sieve_plugin.so) failed: /usr/local/lib/dovecot/libdovecot-sieve.so.0: undefined symbol: mail_deliver_save_open /usr/local/sbin/dovecot -n # 2.0.2: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.9-42.0.2.ELsmp x86_64 CentOS release 4.3 (Final) auth_verbose = yes base_dir = /var/run/dovecot/ default_login_user = nobody disable_plaintext_auth = no info_log_path = /var/qmail/log/dovecot/mail.log listen = * log_path = /var/qmail/log/dovecot/dovecot.log mail_debug = yes mail_location = maildir:~/Maildir mail_plugins = sieve managesieve_notify_capability = mailto managesieve_sieve_capability = comparator-i;octet comparator-i;ascii-casemap fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } service imap-login { inet_listener imap { port = 10143 } inet_listener imaps { port = 10993 ssl = yes } } service pop3-login { inet_listener pop3 { port = 10110 } inet_listener pop3s { port = 10995 ssl = yes } } userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lda { auth_socket_path = /var/run/dovecot/auth-master info_log_path = /var/qmail/log/dovecot/dovecot-deliver.log log_path = /var/qmail/log/dovecot/dovecot-deliver.log mail_plugins = $mail_plugins postmaster_address = postmaster(a)example.tld } protocol lmtp { mail_plugins = $mail_plugins } -- :) cumprimentos ---------------------- José Luís Faria Network Eng./Administrador de Sistemas Departamento de Informática Universidade do Minho Braga, Portugal

3 3

[Dovecot] Expire Mysql backend
by Paweł Madej 16 Sep '10

16 Sep '10

Hello, Is it possible to make expire plugin get per user number of days to expire emails in trash? for example user1 trash 14d user2 trash 30d user3 trash 0d - disable -- Paweł Madej

4 8

[Dovecot] SIS
by Daniel L. Miller 16 Sep '10

16 Sep '10

Is SIS for dbox included in the 2.0.2 sources? Or only via Mercurial? -- Daniel

2 1

[Dovecot] Sieve problems - compiled script does not get updated
by aditsu 16 Sep '10

16 Sep '10

Hi, I'm using Dovecot 1.1.7 with sieve and managesieve, and Thunderbird with the sieve plugin (0.1.10). Sieve filters are generally working, but I noticed a situation where a script wrongly remains in effect. Here's how to reproduce the problem: - write 2 sieve scripts (in Thunderbird), say A and B, triggered by different things - activate script A and send an email that triggers it (so that it gets compiled) - change the active script to B (by clicking its "active" icon in the list) - send an email that triggers B; it will not work - send an email that triggers A; it will still work The only way I found to fix it is to hunt down the corresponding .dovecot.sievec file and delete it (the .dovecot.sieve symlink gets updated correctly, but .dovecot.sievec doesn't). After deleting it, the correct script is compiled and executed. Is this problem fixed in a newer version of dovecot? Thanks Adrian -- View this message in context: http://old.nabble.com/Sieve-problems---compiled-script-does-not-get-updated… Sent from the Dovecot mailing list archive at Nabble.com.

2 2

[Dovecot] sieve rules quiestion (deduplicate e-mails)
by Vasiliy G Tolstov 16 Sep '10

16 Sep '10

Hello. I'm successful use sieve for filtering e-mail from various subscriptions. But if i have subscription for 2 or more mailing lists and user write email to list1(a)xxx.org and list2(a)yyy.org by REPLY TO ALL or make a CC header, i'm recieve email twice, if i reply in some list to user and user REPLY TO ALL - i'm recieve email 3 times :) How can i'm eliminate this duplications? For example i want to recive all emails, but put only one in subscription folder. And other silently discard.... And second question is - i have many subsections to mailing lists, sieve rules looks like this: elsif header :contains "List-Id" ["cfe-dev.cs.uiuc.edu"] { fileinto "Subscriptions/Clang"; } elsif header :contains "List-Id" ["jabberd2-lists.xiaoka.com"] { fileinto "Subscriptions/Jabberd2"; } elsif header :contains "List-Id" ["chef.lists.opscode.com"] { fileinto "Subscriptions/Chef"; } elsif header :contains "List-Id" ["help-cfengine.cfengine.org"] { fileinto "Subscriptions/Cfengine"; } # rule:[Exherbo] elsif header :contains "List-Id" ["exherbo-dev.lists.exherbo.org","exherbo-commits.lists.exherbo.org"] { fileinto "Subscriptions/Exherbo"; } # rule:[Php] elsif header :contains "List-Id" ["highload-php-ru.googlegroups.com","highload-php-en.googlegroups.com"] { fileinto "Subscriptions/Php"; } # rule:[Btrfs] elsif header :contains ["List-Id"] ["linux-btrfs.vger.kernel.org"] { fileinto "Subscriptions/Btrfs"; How can i minimize this rules and save desired functionality? -- Vasiliy G Tolstov <v.tolstov(a)selfip.ru> Selfip.Ru

1 0

[Dovecot] Compiling Dovecot 2.0.2 on Solaris 10 SPARC - libssl.so.1.0.0: open failed
by Edward Carraro 16 Sep '10

16 Sep '10

I'm trying to compile the source for Dovecot 2.0.2 on a Solaris 10 SPARC machine. > uname -a SunOS ommtca013 5.10 Generic_138888-07 sun4v sparc SUNW,Sun-Blade-T6300 Solaris > cat /etc/release Solaris 10 10/08 s10s_u6wos_07b SPARC I've installed the following binaries from sunfreeware for dovecot 1.1 to use with 2.0.2 gcc-3.4.6-sol10-sparc-local ncurses-5.7-sol10-sparc-local libiconv-1.13.1-sol10-sparc-local libintl-3.4.0-sol10-sparc-local nano-2.2.5-sol10-sparc-local gmp-4.2.1-sol10-sparc-local coreutils-8.5-sol10-sparc-local libtool-2.2.6b-sol10-sparc-local openssl-1.0.0a-sol10-sparc-local db-4.7.25.NC-sol10-sparc-local sasl-2.1.21-sol10-sparc-local openldap-2.4.22-sol10-sparc-local zlib-1.2.5-sol10-sparc-local mysql-5.0.67-sol10-sparc-local bzip2-1.0.5-sol10-sparc-local libnet-1.1.2.1-sol10-sparc-local readline-5.2-sol10-sparc-local postgresql-8.4.4-sol10-sparc-local When I compile using: > ./configure --with-ldap or > CPPFLAGS="-I/usr/local/ssl/include" LDFLAGS="-L/usr/local/ssl/lib -ldl" ./configure --with-ldap or > CPPFLAGS="-I/usr/local/ssl/include" LDFLAGS="-L/usr/local/ssl/lib -ldl" ./configure --with-ldap --with-ssl I get the following error when starting up dovecot: Sep 15 11:34:16 master: Error: service(ssl-params): child 12239 killed with signal 9 Sep 15 11:34:16 master: Error: service(ssl-params): command startup failed, throttling Sep 15 11:34:16 ssl-params: Error: ld.so.1: ssl-params: fatal: libssl.so.1.0.0: open failed: No such file or directory libssl.so.1.0.0 exists in /usr/local/ssl/lib... which is what I've passed in LDFLAGS What parameters am I suppose to pass to configure?

4 6

[Dovecot] Migrating mail from mbox to maildir using dovecot
by Donny Brooks 15 Sep '10

15 Sep '10

Hello, Currently our mail server is setup to use postfix and dovecot, which is fine except it is setup to use mbox format mail. That and procmail as we need to move to sieve but that is a different issue. I have searched until blue in the face and cannot find a 100% working solution that doesn't require alot of manual interaction to move the mail boxes from mbox to maildir. I have tried the mb2md.pl stuff but with over 150+ users that can get tedious having to log in as each one of them to migrate them. I also tried the convert plugin located here: http://wiki.dovecot.org/Plugins/Convert but it kept erroring about not able to convert the box and exiting. We have approx 200GB of mail total that needs to be migrated. Maybe I am just simply missing something but is there a way that we can migrate all the users with minimal end user interaction and minimal administration time? We need this done asap as our backups are killing us with the large mbox style files. Thanks in advance for any and all input to this. -- Donny B.

5 9

[Dovecot] Authentication with lower case username ONLY
by Leander S. 15 Sep '10

15 Sep '10

Hi, how do you guys force your users to authenticate with lower case letters ONLY? Or convert it? Is there a SASL Option to force that - or are you using scripts i.e. a bash script in combination with the command "tr" ... or a third solution I didn't think of yet? I'm using Postfix / Dovecot combination. Postfix is told to use Dovecots SASL Service to authenticate it's users. For my outgoing eMails I already wrote a script with tr which forms upercase usernames to lowercase ones ... but it's not enough. SpamAssassin is still confused and writes uppercase letters in it's Database etc. ... So that's why I'm looking for a more universal solution. P.S. I would basically prefer a convertation - but I would also be fine with a forced lower case auth system. Thanks & Regards

5 6

[Dovecot] v2.0.0 released
by Timo Sirainen 15 Sep '10

15 Sep '10

http://dovecot.org/releases/2.0/dovecot-2.0.0.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.0.tar.gz.sig As promised last Friday, here's the v2.0.0 release finally. I'm cautiously optimistic that v2.0.1 won't (have to) be released for a few weeks, since there was quite a lot of testing and fixing going on in the RC stage. Remember to read http://wiki2.dovecot.org/Upgrading/2.0 before upgrading from v1.x. Although there is automatic config conversion, it can't handle everything, so reserve some extra time for upgrading. If you find an upgrade problem that isn't listed on the wiki page, please add it there or email Dovecot mailing list about it. Pigeonhole Sieve and ManageSieve support can now be installed without patching Dovecot. Unfortunately there isn't a Pigeonhole release yet for v2.0, but its Mercurial code tree should be quite stable. See http://wiki2.dovecot.org/Pigeonhole There are no changes since v2.0.rc6. The largest changes since v1.2 are: * Dovecot uses two system users for internal purposes now by default: dovenull and dovecot. You need to create the dovenull user or change default_login_user setting. * Global ACLs are now looked up using namespace prefixes. For example if you previously had INBOX. namespace prefix and a global ACL for "INBOX.Sent", it's now looked up from "INBOX.Sent" file instead of "Sent" as before. * Maildir: File permissions are no longer based on dovecot-shared file, but the mailbox directory. + Redesigned master process. It's now more modular and there is less code running as root. + Configuration supports now per-local/remote ip/network settings. + dsync utility does a two-way mailbox synchronization. + LMTP server and proxying. + Added mdbox (multi-dbox) mail storage backend. + doveadm utility can be used to do all kinds of administration functions. Old dovecotpw and *view utilities now exist in its subcommands. + imap and pop3 processes can now handle multiple connections. + IMAP: COMPRESS=DEFLATE is supported by imap_zlib plugin + director service helps NFS installations to redirect users always to same server to avoid corruption

8 12

[Dovecot] dsync crash
by Василий Шоков 15 Sep '10

15 Sep '10

Hello, When I run dsync -u v.shokov -Dv mirror sdbox:/dsync/v.shokov first time, process halting. On second time I receive this error: dsync(root): Debug: auth input: v.shokov system_groups_user=v.shokov uid=10000 gid=100 home=/home/v.shokov dsync(root): Debug: Effective uid=10000, gid=100, home=/home/v.shokov dsync(root): Debug: Namespace : type=private, prefix=, sep=., inbox=no, hidden=yes, list=yes, subscriptions=yes location=maildir:/home/v.shokov/mail:INDEX=/var/dovecot_index/v.shokov dsync(root): Debug: maildir++: root=/home/v.shokov/mail, index=/var/dovecot_index/v.shokov, control=, inbox= dsync(root): Debug: Namespace : type=private, prefix=.INBOX., sep=., inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/mail/inbox/:INDEX=/var/dovecot_index/v.shokov/inbox dsync(root): Debug: maildir++: root=/home/v.shokov/mail/inbox, index=/var/dovecot_index/v.shokov/inbox, control=, inbox=/home/v.shokov/mail/inbox dsync(root): Debug: Effective uid=10000, gid=100, home=/home/v.shokov dsync(root): Debug: Namespace : type=private, prefix=, sep=., inbox=no, hidden=yes, list=yes, subscriptions=yes location=sdbox:/dsync/v.shokov dsync(root): Debug: fs: root=/dsync/v.shokov, index=, control=, inbox= dsync(root): Debug: Namespace : type=private, prefix=.INBOX., sep=., inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/mail/inbox/:INDEX=/var/dovecot_index/v.shokov/inbox dsync(root): Debug: maildir++: root=/home/v.shokov/mail/inbox, index=/var/dovecot_index/v.shokov/inbox, control=, inbox=/home/v.shokov/mail/inbox dsync(v.shokov): Debug: Namespace : Using permissions from /home/v.shokov/mail: mode=0700 gid=-1 dsync(v.shokov): Debug: Namespace : Using permissions from /dsync/v.shokov: mode=0777 gid=-1 dsync(v.shokov): Panic: file mailbox-list-fs.c: line 150 (fs_list_get_path): assertion failed: (mailbox_list_is_valid_pattern(_list, name)) dsync(v.shokov): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0 [0x224ae0] -> /usr/lib/dovecot/libdovecot.so.0(default_fatal_handler+0x45) [0x224bd5] -> /usr/lib/dovecot/libdovecot.so.0 [0x224168] -> /usr/lib/dovecot/libdovecot-storage.so.0 [0x181866] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_list_get_path+0x1d) [0x14d9bd] -> /usr/lib/dovecot/libdovecot-storage.so.0 [0x182724] -> /usr/lib/dovecot/libdovecot-storage.so.0(fs_list_iter_next+0x42) [0x182262] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_list_iter_next+0x12) [0x14da42] -> /usr/lib/dovecot/libdovecot-storage.so.0 [0x14ec7f] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_list_iter_next+0x12) [0x14da42] -> dsync [0x80580a6] -> dsync [0x804ed08] -> dsync(dsync_brain_sync+0x447) [0x804e067] -> dsync [0x804ef29] -> dsync(dsync_brain_sync+0x3f6) [0x804e016] -> dsync(dsync_brain_sync_all+0x18) [0x804ec08] -> dsync(main+0x52b) [0x804d06b] -> /lib/libc.so.6(__libc_start_main+0xe0) [0x2e8f90] -> dsync [0x804c951] My Dovecot version is 2.0.2. My config file is: # 2.0.2: /etc/dovecot/dovecot.conf # OS: Linux 2.6.23.15-80.0.120asp i686 Fedora release 7 (Moonshine) disable_plaintext_auth = no dotlock_use_excl = yes listen = 10.62.1.250 lock_method = dotlock log_path = /var/log/dovecot.log mail_fsync = never mail_location = maildir:/home/%u/mail:INDEX=/var/dovecot_index/%u mmap_disable = yes namespace { hidden = yes location = prefix = separator = . type = private } namespace { hidden = no inbox = yes location = maildir:~/mail/inbox/:INDEX=/var/dovecot_index/%u/inbox prefix = .INBOX. separator = . type = private } passdb { driver = pam } plugin { acl = vfile:/etc/dovecot-acls } service auth { user = root } service imap-login { client_limit = 1000 inet_listener imaps { address = * } process_limit = 256 process_min_avail = 4 service_count = 0 user = dovecot } service pop3-login { client_limit = 3 inet_listener pop3s { address = * } process_limit = 10 process_min_avail = 1 service_count = 1 user = dovecot } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } protocol imap { imap_client_workarounds = delay-newmail mail_plugin_dir = /usr/lib/dovecot mail_plugins = acl } protocol lda { postmaster_address = root(a)rittal.ru } Kind regards, Vasiliy Shokov

1 0

[Dovecot] sieve is broken in the latest revision
by interfaSys sàrl 15 Sep '10

15 Sep '10

All the sudden messages filtered by sieve are delivered to folders named after the recipient instead of sticking to the rules and delivering the messages to the INBOX. Is this an intended change? Instead of Maildir/.INBOX it goes to Maildir/.user(a)domain.com Cheers, Olivier

3 6

[Dovecot] autogen.sh fails
by interfaSys sàrl 15 Sep '10

15 Sep '10

autogen.sh fails on FreeBSD 8.1 m4 1.4.15 autoconf 2.67 Here is the error message: libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. configure:20543: error: possibly undefined macro: AS_MESSAGE_LOG_FDdnl If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. Cheers, Olivier

2 2

[Dovecot] Dsync error, Targer mailbox already exists
by Henrique Fernandes 14 Sep '10

14 Sep '10

Hey, why i am getting this error ? dsync(user(a)example.com): Error: Can't rename mailbox VoIP_08300a224c41694c0d0f000020ce4ec5 to VoIP: Target mailbox already exists It happens when i run dsync twice, but it should do only changes right ? dovecot 2.0 I am traying to convert all my user mboc to maildir so i made an script to help. The enveriment: Have dovecot looking into file conf and in mysql. Mysql over rides file conf. in file have mail_location mbox:path:INBOX:path2 so i run this comand: dsync -v -u user(a)domain.com mirror maildir:~/mail/ I run this command to all user in my server, about 8000 After the first dsync it will take a while, but dovecot is still running and looking at mail_location to mbox. So now, i run again dsync, but now i thought it would do only changes, email that arrived while i was converting, but is not doing this and i am getting that stuff, so i get duplicated mailbox. Anyway, my ideia after this second sync that should be much faster i would change in mysql to mail_location maildir:~/mail/ And from now on this user would receive mail to maildir location, and i would run now the dsync but now reversed. like this: dsync -v -u user(a)domain.com mirror mbox:/pathl:INBOX=path And it should be working now right ? Without any down time ? Does any one have a better ideia about how to sync this mails without down time ? Thanks for all! But the bigs quest here is about the error: dsync(user(a)example.com): Error: Can't rename mailbox VoIP_08300a224c41694c0d0f000020ce4ec5 to VoIP: Target mailbox already exists Any one ? []'sf.rique

2 3

[Dovecot] quota dict play nice with existing tables
by Miha Vrhovnik 14 Sep '10

14 Sep '10

Hi, I'm trying to set Dovecot 2.0 with postgresql dict. It's kind of working but not as I'd like to. Dovecot expects to get a dedicated table for quota management. When I've run *doveadm quota recalc -A* I've noticed in the logs that Dovecot tries to run DELETE statements. Fortunately it didn't succeed as I've only given it SELECT and UPDATE permissions on the fields that it needs. I'd like to configure it, in UPDATE only mode as rows already exist and there is no need to issue any other statement. Regards, Miha -- It's time to get rid of your current e-mail client ... ... and start using si.Mail. It's small & free. ( http://www.simail.si/ )

2 5

[Dovecot] need help with shared mailboxes
by alex 14 Sep '10

14 Sep '10

I have some problems with setting shared mailboxes . I use dovecot 1.2.11 with following namespaces : mail_location: maildir:~ namespace: type: private separator: . inbox: yes list: yes subscriptions: yes namespace: type: private separator: . prefix: INBOX. hidden: yes list: no subscriptions: yes namespace: type: shared separator: . prefix: shared.%%n. location: maildir:/home/sites/%d/mail/%%n/Maildir/ list: children plugin: acl: vfile acl_shared_dict: proxy::acl dict: acl: mysql:/usr/local/etc/dovecot-share-sql.conf In the private namespace I use to have only INBOX. space because I have migrate from courier and I ahave problemes with duplicate folders. The disk structure looks like : /home/sites/domain.tld/mail/user(withoutdomain)/Maildir What I'am trying to do is to give access to a user (user2(a)domain.tld) some other user mailbox (user1(a)domain.tld) in the /home/sites/domain.tld/mail/user1/Maildir I have created a file dovecot-acl with : owner lrwstipekxa user=user2(a)domain.tld rl - in the dovecot-share-sql.conf I have : connect = host=/var/lib/mysql/mysql.sock dbname=xxxx user=xxx password=postfixpass map { pattern = shared/shared-boxes/user/$to/$from table = user_shares value_field = dummy fields { from_user = $from to_user = $to } } and in the user_share table : +-------------------+------------------+-------+ | from_user | to_user | dummy | +-------------------+------------------+-------+ | user1(a)myhost.ro | user2(a)domain.tld | 1 | | user1 | user2 | 1 | +-------------------+------------------+-------+ (not sure what I need %n or %u) Now , in TB under the user2 , if I check subscribe , under the shared, I have a INBOX folder that is always check but nothing else. From what I understand I suppose to see user1 folders and I think it is something wrong with my config (namespaces, paths). If someone have succeeded to configure dovecot with shared mailboxes and namespaces that use . as separator please help me. Alex.

2 10

[Dovecot] DC 2.0.2 | Panic: file istream-crlf.c: line 101
by interfaSys sàrl 14 Sep '10

14 Sep '10

There is a new error showing up in my logs Sep 14 11:04:57 lda(user(a)domain.com): Panic: file istream-crlf.c: line 101 (i_stream_crlf_read_crlf): assertion failed: (src == ptr + 1) It seems to only happen with one account Cheers, Olivier

2 1

[Dovecot] dspam + dovecot LDA
by Paweł Madej 14 Sep '10

14 Sep '10

Hello, Is there any possibility to make dspam transport validated emails directly to dovecot LDA? for now I use such schema: postfix > dspam > postfix > dovecot LDA but wanted to not return emails to postfix. I've found that such configuration is possible with dspam+ cyrus IMAP. Documentation of dovecot is great but I haven't found such solution. Thanks in advance for any help. -- Greets Paweł Madej Poland

3 4

[Dovecot] weird dovecot+outlook problem
by Per Jessen 14 Sep '10

14 Sep '10

I have some per-user, read-only mailboxes that I'm auto-subscribing users to. With Thunderbird I have no problems, but with Outlook, the contents of the 'To:' column is not shown until a user actually retrieves the mail. Does this ring a bell with anyone? /Per Jessen, Zürich

2 2

[Dovecot] fts plugin for xapian ?
by Per Jessen 14 Sep '10

14 Sep '10

I have googled it some, and found a couple of references, but nothing specific - has anyone already started work on such a plugin? /Per Jessen, Zürich

2 1

[Dovecot] Problem with Sieve Vacation
by Birger Schacht 14 Sep '10

14 Sep '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, dovecot version 1.2.12 on freebsd 7.0 with dovecot-sieve-1.2+0.1.17 I have users in ldap and aliases in /etc/aliases and i use postfix. There is an alias testuser@hostname for tuser@hostname. When tuser uses sieve vacation and uses the :addresses options with his email address (tuser@hostname), the response is also sent, if a mail to testuser@hostname is sent. in the postfix master.cf the line for deliver is flags=DRhu user=vmail:vmail argv=/usr/local/libexec/dovecot/deliver -f ${sender} -d ${recipient} -a ${original_recipient} is this a bug, or do i have some quirks in my configuration? birger ps: not on this list, so please cc answers to me - -- GPG: http://gpg-keyserver.de/pks/lookup?op=get&search=0x5DF89014F45C1912 GPG FP: 479E 1F02 12BD AA8A C4A9 0F19 5DF8 9014 F45C 1912 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkyGC8wACgkQXfiQFPRcGRL0vwCgz/EZveKjTgNPkRvkzSQGd5sH RkEAnAqch133qYi2eCZ85IydBjDNuKWu =NSXZ -----END PGP SIGNATURE-----

3 3

[Dovecot] LMTP Proxy not logging users' IP
by Luca Palazzo 14 Sep '10

14 Sep '10

Hi All, is there any way to enable logging of users' IP address in dovecot director host? It actually logs only: Sep 14 07:32:29 mailgw-lb dovecot: lmtp(17615): Connect from xx.xx.xx.xx Sep 14 07:32:29 mailgw-lb dovecot: lmtp(17615): Disconnect from xx.xx.xx.xx: Client quit Thanks Luca

1 1

[Dovecot] Lost %d variable
by Aladdin 13 Sep '10

13 Sep '10

I'm trying to set up sieve with dovecot, and for some reason, sieve is not getting the %d variable that is part of the path to where its script should be. Here's the version: ops:/var/log/mail# dovecot --version 1.2.13 And, here's the configuration (I've left it all for reference, but moved the lda & plugins portions together and marked them out): ops:/var/log/mail# dovecot -n # 1.2.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-3-686 i686 Debian 4.0 ext3 log_path: /var/log/mail/dovecot.log info_log_path: /var/log/mail/dovecot.info log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_parameters_regenerate: 0 disable_plaintext_auth: no verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_location: maildir:/var/mail/%d/%n:CONTROL=/var/mail/%d/%n:INDEX=/var/mail/%d/%n:INBOX= /var/mail/%d/%n mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 ----------- Start lda/sieve part -------------- lda: log_path: /var/log/mail/deliver-errors.log info_log_path: /var/log/mail/deliver.log postmaster_address: aladdin(a)csunv.com mail_plugin_dir: /usr/lib/dovecot/modules/lda mail_plugins: sieve plugin: sieve: /var/mail/%d/%n/.sieve ----------- End lda/sieve part -------------- auth default: verbose: yes passdb: driver: passwd-file args: /etc/dovecot/passwd.dovecot userdb: driver: static args: uid=vmail gid=vmail home=/var/mail/home/%u userdb: driver: passwd plugin: sieve: /var/mail/%d/%n/.sieve And, here is the log output: ops:/var/log/mail# cat deliver-errors.log 2010-09-11 18:23:46 deliver(aladdin): Error: sieve: failed to stat user's sieve script: stat(/var/mail//aladdin/.sieve) failed: Not a directory (using global script path in stead) 2010-09-11 18:23:46 deliver(aladdin): Error: stat(/var/mail//aladdin/tmp) failed: Not a directory Obviously, the double slashes shouldn't be there; there should be the domain name: /var/mail/csunv.com/aladdin The "regular" dovecot gets the path fine; that is also where it puts the mail, and I'm getting mail just fine. TIA, Allen

5 12

[Dovecot] fetchmail and lmtp -> auth crashing
by Dirk Heinrichs 13 Sep '10

13 Sep '10

Hi, while trying to get new mails into dovecot 2.0.1 via fetchmail and lmtp, auth process crashes: Sep 7 19:55:58 oldbox dovecot: lmtp(29944): Error: userdb lookup(heini@localhost): Disconnected unexpectedly Sep 7 19:55:58 oldbox fetchmail[29928]: Nachricht USER@ISP:1 von 2 wird gelesen (2204 Bytes im Nachrichtenkopf) (Log-Meldung unvollständig) Sep 7 19:55:58 oldbox fetchmail[29928]: LMTP-Fehler: 451 4.3.0 <heini@localhost> Internal error occurred. Refer to server log for more information. Sep 7 19:55:58 oldbox dovecot: master: Error: service(auth): child 29949 killed with signal 11 (core not dumped) Sep 7 19:55:58 oldbox dovecot: master: Error: service(auth): command startup failed, throttling # doveconf -n # 2.0.1 (a05834588ffb): /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-486 i586 Debian squeeze/sid auth_debug = yes auth_gssapi_hostname = oldbox.altum.de auth_krb5_keytab = /etc/krb5.keytab auth_mechanisms = gssapi auth_verbose = yes disable_plaintext_auth = no listen = * mail_location = maildir:~/mail managesieve_notify_capability = mailto managesieve_sieve_capability = comparator-i;octet comparator-i;ascii-casemap fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap lmtp service lmtp { unix_listener lmtp { mode = 0666 user = fetchmail } } ssl = no ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = uid=vmail gid=vmail home=/var/vmail/%u driver = static } fetchmailrc: set postmaster "postmaster" set nobouncemail set no spambounce set properties "" set daemon 60 set syslog poll ISP with proto IMAP user 'USER' there with password 'password' is 'heini' here options stripcr fetchsizelimit 0 ssl expunge 500 smtphost /var/run/dovecot/lmtp Any ideas what could be wrong? Thanks... Dirk

2 7

[Dovecot] dsync: mbox to maildir hangs
by Burckhard Schmidt 13 Sep '10

13 Sep '10

Hello, after successfully converting some mailboxes I have a problem: dsync does not finish its work. dovecot 2.0.2. mail-location maildir:~/maildir I have copied the old Inbox and folders into /mailstore1/import-inbox and /mailstore1/import-home to the new server. (used with Dovecot 1.0.13 before) For one account I have now 356 folders containing about 60000 emails. (35 folders with about 40000 emails had been converted without problems) I used: dsync -v -u account mirror mbox:/mailstore1/import-home/~account:INBOX=/mailstore1/import-inbox/account dsync shoes after two minutes a list of all folders like this dsync(account): Info: Mail/folderx: only in dest After about 8 minutes some folders are converted. But then it hangs inside a folder which is just converting. I see entries (emails) inside "folder/tmp" but not all. And the "folder/cur" is still empty. dsync uses about 75% of one cpu all the time. I was waiting more than 50 minutes but no progress. I have to use kill -9 to stop it. If I delete this folder it still happens with a different one. Are there any limitations? Any advice? Regards - Burckhard Schmidt

2 2

[Dovecot] Pigeonhole proxy errors
by Cassidy Larson 13 Sep '10

13 Sep '10

I'm trying to upgrade my proxy front-ends to 2.0.2. I have the latest Pigeonhole release installed, and whenever I connect to the sieve port this gets logged in the syslog: managesieve-login: Error: auth: connect(login) in directory / failed: Permission denied (euid=144(<unknown>) egid=144(<unknown>) missing +x perm: /, euid is not dir owner) I dont get any capabilities displayed on the client side. I'm not sure why it's referring to the '/' directory. On 1.2.x, I authenticate the user and proxy to the sieve process on appropriate users back-end storage node. Here is the sieve config in my dovecot config file: ------------ service managesieve-login { inet_listener sieve { address = a.b.c.d port = 4190 } inet_listener sieve_deprecated { address = a.b.c.d port = 2000 } } protocol sieve { managesieve_max_line_length = 65536 managesieve_logout_format = bytes=%i/%o managesieve_implementation_string = Dovecot Pigeonhole mail_debug=no } -------- Any help would be great. thanks!

2 4

[Dovecot] It's broke but I can't see why
by Ian macdonald 13 Sep '10

13 Sep '10

Hi All, My Dovecot was working I made a change and receive this error Sep 13 17:01:42 geomail dovecot: imap-login: Internal login failure (auth failed, 1 attempts): user=<user>, method=PLAIN, rip=xxx.xxx.xxx.xxx, lip=192.168.1.80, TLS Sep 13 17:01:43 geomail dovecot: dovecot: Relative home directory paths not supported (user user): I had changed mechanisms = plain to mechanisms = plain login I removed the extra login and it still reports the same error, I must have changed something else by mistake, but I just cannot see what I have done, I was stupid and the backup config is older and not working properly with shared files:-( dovecot -n gives # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-24-server x86_64 Ubuntu 10.04.1 LTS ext3 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps pop3s ssl_cert_file: /etc/ssl/certs/ssl-cert-dovecot.pem ssl_key_file: /etc/ssl/private/ssl-cert-dovecot.key login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:/home/%u/Maildir mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): deleted_to_trash acl imap_acl mail_plugins(imap): deleted_to_trash acl imap_acl mail_plugins(pop3): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: public separator: / prefix: public/ location: maildir:/var/mail/public/:CONTROL=~/Maildir/control/public:INDEX=~/Maildir/index/public list: yes namespace: type: shared separator: / prefix: shared/%%u/ location: maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u list: yes lda: postmaster_address: user@domain mail_plugins: acl auth default: passdb: driver: pam userdb: driver: passwd args: home= socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 plugin: deleted_to_trash_folder: Trash acl: vfile acl_shared_dict: file:/var/lib/dovecot/shared-mailboxes.db Thank you Ian

2 1

[Dovecot] dovecot 2.0.2 compile issues on Solaris 10u8 Sparc
by Jerry K 13 Sep '10

13 Sep '10

I am having compile problems with Dovecot v2.0.2 on a well patched Solaris 10u8 Sparc system using the included gcc compiler. Version 2.0.0 compiled with out any issues using the same configure syntax. My ./configure syntax looks like this: ./configure --with-ssl=openssl --with-shadow Yahoo and Google searches turned up nothing for me. Reviewing the file mountpoint.c between version 2.0.0 and 2.0.2 shows the files to be identical, so I have a problem somewhere else, I am just not sure where. TIA for any pointers, Jerry \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -I/usr/sfw/include -MT module-dir.lo -MD -MP -MF .deps/module-dir.Tpo -c -o module-dir.lo module-dir.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -I/usr/sfw/include -MT module-dir.lo -MD -MP -MF .deps/module-dir.Tpo -c module-dir.c -fPIC -DPIC -o .libs/module-dir.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -I/usr/sfw/include -MT module-dir.lo -MD -MP -MF .deps/module-dir.Tpo -c module-dir.c -o module-dir.o >/dev/null 2>&1 mv -f .deps/module-dir.Tpo .deps/module-dir.Plo /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -I/usr/sfw/include -MT mountpoint.lo -MD -MP -MF .deps/mountpoint.Tpo -c -o mountpoint.lo mountpoint.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -I/usr/sfw/include -MT mountpoint.lo -MD -MP -MF .deps/mountpoint.Tpo -c mountpoint.c -fPIC -DPIC -o .libs/mountpoint.o mountpoint.c: In function `mountpoint_get': mountpoint.c:88: error: field `ent' has incomplete type mountpoint.c:89: error: field `ext' has incomplete type mountpoint.c:172: warning: implicit declaration of function `resetmnttab' mountpoint.c:173: warning: implicit declaration of function `getextmntent' mountpoint.c:174: warning: implicit declaration of function `hasmntopt' make[4]: *** [mountpoint.lo] Error 1 make[4]: Leaving directory `/usr/local/src/d/dovecot-2.0.2/src/lib' make[3]: *** [all] Error 2 make[3]: Leaving directory `/usr/local/src/d/dovecot-2.0.2/src/lib' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/usr/local/src/d/dovecot-2.0.2/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/usr/local/src/d/dovecot-2.0.2' make: *** [all] Error 2

3 8

[Dovecot] using palm pre client with imap server
by zhong ming wu 13 Sep '10

13 Sep '10

Hello Anyone here tried to use palm pre built-in email client with imap server (TLS)? Mine does not work; only one line in the log. imap-login: Disconnected (no auth attempts): rip=xxx.xxx.19.21, lip=xxx.yyy.zzz.aaa dovecot -n # 1.2.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.9-42.ELsmp i686 Red Hat Enterprise Linux ES release 4 (Nahant Update 8) ext3 base_dir: /var/run/dovecot syslog_facility: local0 protocols: imap listen: xxx.yyy.zzz.aaa ssl_ca_file: /etc/pki/ca.crt.crl ssl_cert_file: /etc/pki/private/ssl.crt.key.pem ssl_key_file: /etc/pki/private/ssl.crt.key.pem ssl_parameters_regenerate: 29 login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/imap-login mail_location: maildir:/home/vmail/%d/%n/Mail auth default: user: squab username_chars: abcdefghijklmnopqrstuvwxyz01234567890.-_@ username_format: %Lu passdb: driver: sql args: /etc/dovecot/sql.conf userdb: driver: sql args: /etc/dovecot/sql.conf

5 7

[Dovecot] LMTP proxying strategy with multiple recipient delivery
by Luca Palazzo 13 Sep '10

13 Sep '10

Hi Timo and All, how does Dovecot act when an MTA tries to deliver a multiple recipient message to a LMTP proxied system? Does it uses server affinity table for each recipient? I use lmtp_destination_recipient_limit = 1 setting in postfix to avoid multiple recipient delivery. Is it right? I use lmtp_destination_concurrency_limit = 1 too, but i think that it's useless or, maybe, it can make performance worst. Luca

2 4

Re: [Dovecot] Upgraded dovecot - now it insists on imap TLS
by Alan Brown 13 Sep '10

13 Sep '10

Marcus Rueckert wrote: > > What am I missing? > dovecot -n output would help. It would, but I found/fixed the problem already. I had to set the following: protocol imap { disable_plaintext_auth=no } The default has changed from "no" to "yes" between 1.1.20 and 2.0.1, but the conversion routine didn't pick it up (the wiki Documentation suggests the default is still "no". Perhaps this should be updated?) This still requires TLS on port 993, so there's no additional hole opened. Ironically, we published plans some time back to disable local-access plaintext imap logins in October and have been warning users to change their settings but 90% of them hadn't yet done so.

2 1

[Dovecot] Virtual mailbox help
by Joy 13 Sep '10

13 Sep '10

Dear All, I am trying to configure Virtual mailbox but having issue my squirrelmail is showing following error:- ERROR: Connection dropped by IMAP server. Query: LSUB "" "*" I have also check Thunderbird but having same issue. Please check my configuration and let me know any issue detected in it, Here is my configuration:- # 2.0.0: /usr/local/dovecot/etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-686 i686 Debian 5.0.5 mail_location = maildir:~/Maildir mail_plugins = quota acl virtual namespace { inbox = yes location = prefix = separator = . type = private } namespace { list = children location = maildir:/var/mail/public prefix = Public. separator = . subscriptions = no type = public } namespace { location = virtual:~/Maildir/.virtual:LAYOUT=maildir++ prefix = virtual. separator = . } plugin { acl = vfile:/usr/local/dovecot/dovecot-acl/acl } After doing all configuration i created the following dir under .virtual dir. /home/domain/user/Maildir/.virtual/.Unseen /home/domain/user/Maildir/.virtual/.Unseen/ here created dovecot-virtual file with following text .. INBOX Unseen Restarted and set proper permission on all created directories then tried to login to client and getting the follwoing error in log file .. Sep 09 13:02:47 imap-login: Info: Login: user=<piyush>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=3505, secured Sep 09 13:02:48 imap(piyush): Panic: file strfuncs.c: line 72 (p_strndup): assertion failed: (max_chars != (size_t)-1) Sep 09 13:02:48 imap(piyush): Error: Raw backtrace: /usr/local/dovecot/lib/dovecot/libdovecot.so.0 [0x9fefd9e1] -> /usr/local/dovecot/lib/dovecot/libdovecot.so.0 [0x9fefda5f] -> /usr/local/dovecot/lib/dovecot/libdovecot.so.0(i_error+0) [0x9fefdd18] -> /usr/local/dovecot/lib/dovecot/libdovecot.so.0 [0x9ff1a2df] -> /usr/local/dovecot/lib/dovecot/libdovecot.so.0(t_strndup+0x30) [0x9ff1a310] -> /usr/local/dovecot/lib/dovecot/lib01_acl_plugin.so [0x9fd32747] -> /usr/local/dovecot/lib/dovecot/libdovecot-storage.so.0(mailbox_list_iter_next+0x12) [0x9ff559f2] -> dovecot/imap [0x8051deb] -> dovecot/imap(cmd_list_full+0x424) [0x8052d34] -> dovecot/imap(cmd_lsub+0x19) [0x8053129] -> dovecot/imap [0x805671c] -> dovecot/imap [0x80567b9] -> dovecot/imap(client_handle_input+0x2d) [0x805692d] -> dovecot/imap(client_input+0x5f) [0x805731f] -> /usr/local/dovecot/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0xf5) [0x9ff0a275] -> /usr/local/dovecot/lib/dovecot/libdovecot.so.0(io_loop_run+0x30) [0x9ff09250] -> /usr/local/dovecot/lib/dovecot/libdovecot.so.0(master_service_run+0x2a) [0x9fef672a] -> dovecot/imap(main+0x2b5) [0x805ff95] -> /lib/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0x9fd66455] -> dovecot/imap [0x804eac1] Sep 09 13:02:48 master: Error: service(imap): child 3505 killed with signal 6 (core dumps disabled) Please let me know the issue ??

2 1

[Dovecot] Dovecot 2.0.2 breakes LMTP delivery for me
by Fabian Ruff 13 Sep '10

13 Sep '10

Hi, I'm onboard Debian Lenny (amd64) and just reverted from 2.0.2-0~auto+4 back to 2.0.1-0~auto+1 because LMTP stopped working completly with the above Package. In my setup delivery is done from exim via LMTP to dovecot (Maildir/ext3). The lmtp dovecot config looks like this: > service lmtp { > user = vmail > inet_listener lmtp { > address = 127.0.0.1 > port = 24 > } > > unix_listener lmtp { > } > } > protocol lmtp { > hostname = [...].de > mail_plugins = sieve quota listescape > postmaster_address = postmaster@[...].de > } With the new version I get no LMTP log message at all from dovecot and Exim fails with: > LMTP timeout after initial connection When I do "/etc/init.d/dovecot stop" some process remain alive and I ultimately have to SIGKILL the lmtp process to get rid of it. > trench:/tmp# ps auwx |grep dovecot > root 2643 0.0 0.0 8224 768 pts/1 R+ 22:50 0:00 grep dovecot > root 31778 0.0 0.0 12384 684 pts/2 S+ 22:36 0:00 tail -f > /var/log/mail/dovecot.log > dovecot 32368 0.0 0.0 12656 996 ? S 22:40 0:00 dovecot/anvil > root 32369 0.0 0.0 12788 1124 ? S 22:40 0:00 dovecot/log > root 32371 0.0 0.0 20148 4404 ? S 22:40 0:00 > dovecot/config > vmail 32764 99.9 0.0 36400 2612 ? R 22:40 10:08 dovecot/lmtp > trench:/tmp# kill 32368 > trench:/tmp# kill 32369 > trench:/tmp# ps auwx |grep dovecot > root 2689 0.0 0.0 8224 768 pts/1 R+ 22:50 0:00 grep dovecot > root 31778 0.0 0.0 12384 684 pts/2 S+ 22:36 0:00 tail -f > /var/log/mail/dovecot.log > root 32371 0.0 0.0 20148 4404 ? S 22:40 0:00 > dovecot/config > vmail 32764 99.8 0.0 36400 2612 ? R 22:40 10:20 dovecot/lmtp > trench:/tmp# ps auwx |grep dovecot > root 2692 0.0 0.0 8224 764 pts/1 R+ 22:50 0:00 grep dovecot > root 31778 0.0 0.0 12384 684 pts/2 S+ 22:36 0:00 tail -f > /var/log/mail/dovecot.log > root 32371 0.0 0.0 20148 4404 ? S 22:40 0:00 > dovecot/config > vmail 32764 99.9 0.0 36400 2612 ? R 22:40 10:28 dovecot/lmtp > trench:/tmp# kill 32764 > trench:/tmp# ps auwx |grep dovecot > root 2700 0.0 0.0 8224 768 pts/1 R+ 22:50 0:00 grep dovecot > root 31778 0.0 0.0 12384 684 pts/2 S+ 22:36 0:00 tail -f > /var/log/mail/dovecot.log > root 32371 0.0 0.0 20148 4404 ? S 22:40 0:00 > dovecot/config > vmail 32764 99.9 0.0 36400 2612 ? R 22:40 10:41 dovecot/lmtp > trench:/tmp# kill -9 32764 > trench:/tmp# ps auwx |grep dovecot > root 2830 0.0 0.0 8224 768 pts/1 R+ 22:51 0:00 grep dovecot > root 31778 0.0 0.0 12384 684 pts/2 S+ 22:36 0:00 tail -f > /var/log/mail/dovecot.log The older version works without any problems for me. Any ideas whats the Problem? Could there be a regression from the LMTP fixes introduced in 2.0.2? Cheers, Fabian Ruff

2 1

[Dovecot] xxxx-login: Error: open(proxy-notify) failed: No such file or directory
by Luca Palazzo 13 Sep '10

13 Sep '10

Hi All, just noted this error message. What does it mean? System seem to work fine but i get a lot of them. Luca

2 1

[Dovecot] Global ACLs
by Paweł Madej 13 Sep '10

13 Sep '10

Hello, how can I do this every user have .Spam mailbox and i want user spamadmin to have access to it i got global acl file with content user=spamadmin lrp but I cannot list other users .Spam mailboxes Greets and thanks in advance for any help and suggestions -- Paweł Madej

2 2

[Dovecot] Certificate for outlook 2003
by Richard Gliebe 13 Sep '10

13 Sep '10

Hi all, We are running "dovecot-1.0.7-7.el5" on a CentOS release 5.5 (Final) box. I know, its an old version, but it cames up with the CentOS release (yum). Anyway. Is there a way to import the certificate, which was generated with "mkcert_dovecot.sh", permanently to the outlook 2003 clients? Every time, when our office 2003 clients fetches there emails (POP3s) from our dovecot server, they will be asked "......, the CN-Name of this certificate doesn't match with the taken Value. Do you want to continue with this server?. sorry for the poor english translation. Here in german (for some german people): Der Server, mit dem Sie verbunden sind, verwendet ein Sicherheitszertifikat, das nicht verifiziert werden konnte. Der CN-Name des Zertifikates stimmt nicht mit dem übergebenen Wert überein. Möchten Sie diesen Server weiterhin verwenden? many thanks for some hints Richard

4 4

[Dovecot] mdbox, doveadm force-resync crashing
by Brandon Lamb 13 Sep '10

13 Sep '10

doveadm force-resync -u johnh(a)vinemaker.com INBOX doveadm(johnh(a)vinemaker.com): Error: Corrupted index file /mail/mail2/j/vinemaker.com/johnh/./mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index: messages_count too large (414 > 385) doveadm(johnh(a)vinemaker.com): Warning: fscking index file /mail/mail2/j/vinemaker.com/johnh/./mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index doveadm(johnh(a)vinemaker.com): Error: Fixed index file /mail/mail2/j/vinemaker.com/johnh/./mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index: messages_count 414 -> 385 doveadm(johnh(a)vinemaker.com): Error: Fixed index file /mail/mail2/j/vinemaker.com/johnh/./mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index: seen_messages_count 386 -> 379 doveadm(johnh(a)vinemaker.com): Panic: file mail-index-write.c: line 188 (mail_index_write): assertion failed: (index->log_locked) doveadm(johnh(a)vinemaker.com): Error: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0(+0x39c1a) [0x7f39c4bf5c1a] -> /usr/local/lib/dovecot/libdovecot.so.0(default_fatal_handler+0x37) [0x7f39c4bf5cf7] -> /usr/local/lib/dovecot/libdovecot.so.0(i_error+0) [0x7f39c4bd3026] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(mail_index_write+0x793) [0x7f39c56eac73] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(mail_index_fsck+0xc7e) [0x7f39c56d5cee] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(+0x42577) [0x7f39c56d8577] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(mail_index_map+0x59) [0x7f39c56d8a79] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(+0x3d599) [0x7f39c56d3599] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(mail_index_open+0x118) [0x7f39c56d3938] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(index_storage_mailbox_open+0xbc) [0x7f39c5705e9c] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(dbox_mailbox_open+0x61) [0x7f39c5720f61] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(+0x2e161) [0x7f39c56c4161] -> /usr/local/bin/doveadm() [0x409518] -> /usr/local/bin/doveadm() [0x4095cf] -> /usr/local/bin/doveadm() [0x409aee] -> /usr/local/bin/doveadm(doveadm_mail_single_user+0x53) [0x409be3] -> /usr/local/bin/doveadm() [0x409f51] -> /usr/local/bin/doveadm(doveadm_mail_try_run+0x141) [0x40a191] -> /usr/local/bin/doveadm(main+0x381) [0x40e091] -> /lib/libc.so.6(__libc_start_main+0xfd) [0x7f39c446dc4d] -> /usr/local/bin/doveadm() [0x409319] Aborted

2 1

[Dovecot] v2.0.2 released
by Timo Sirainen 13 Sep '10

13 Sep '10

http://dovecot.org/releases/2.0/dovecot-2.0.2.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.2.tar.gz.sig Many small fixes and logging improvements, but most importantly fixes LMTP with Maildir. * vpopmail support is disabled for now, since it's broken. You can use it via checkpassword support or its sql/ldap database directly. - maildir: Fixed "duplicate uidlist entry" errors that happened at least with LMTP when mail was delivered to multiple recipients - Deleting ACLs didn't cause entries to be removed from acl_shared_dict - mail_max_lock_timeout setting wasn't working with all locks - auth_cache_size setting's old-style value wasn't autoconverted and it usually also caused a crash

3 4

[Dovecot] Upgraded dovecot - now it insists on imap TLS
by Alan Brown 13 Sep '10

13 Sep '10

This is definitely an operator error issue, but I'm under a bit of pressure. I updated our 1.1.20 installation to 2.0.1 over the weekend and discovered this morning that it's insisting on TLS imap on port 143 as well as port 993 What am I missing? Thanks in advance Alan

2 1

[Dovecot] SSHA256 password too short
by Osvaldo Alvarez Pozo 13 Sep '10

13 Sep '10

Hi all I am upgrading a mail system. So I installed aside a new server with debian lenny dovecot 1.2 from backports , postfix 2.5, mysql 5. I recovered the database from the actual production system with a dump. But when i started testing I found this in my logs Sep 13 09:45:07 auth-worker(default): Info: sql(user(a)domain.tld,127.0.0.1): Password mismatch Sep 13 09:45:07 auth-worker(default): Error: ssha256_verify(user(a)domain.tld): SSHA256 password too short Sep 13 09:45:07 auth-worker(default): Warning: Invalid OTP data in passdb Sep 13 09:45:07 auth-worker(default): Warning: Invalid OTP data in passdb But the same users gets connected normally to the production system. I use mysql as driver and my default_schema is md5 Any ideas ?? Thanks in advance

3 2

[Dovecot] Proper use of convert plugin?
by Donny Brooks 13 Sep '10

13 Sep '10

I am trying to convert from mbox to maildir on our mail server here at work. The specs are as follows: Fedora 11 x86-64 dovecot-1.2.11-3.fc11.x86_64 postfix-2.5.6-3.fc11.x86_64 dovecot-managesieve-1.2.11-3.fc11.x86_64 We are currently using mbox format with the users INBOX set to /var/spool/mail/username and other mail is in /home/username/Mail. I would like to migrate to maildir format. I tried using the convert plugin as the wiki suggested: mail_location = maildir:~/Maildir protocol imap { mail_plugins = convert } protocol pop3 { mail_plugins = convert } plugin { convert_mail = mbox:/home/%u/Mail:INBOX=/var/spool/mail/%u } When doing this I get this scrolling in the /var/log/maillog... Sep 11 14:41:38 roark dovecot: IMAP(username): Mailbox conversion: Lock creation timeouted Sep 11 14:41:39 roark dovecot: IMAP(username): Fatal: Mailbox conversion failed, exiting Sep 11 14:56:53 roark dovecot: POP3(otheruser): Mailbox conversion: rename(/home/otheruser/Mail, /home/otheruser/Mail-converted) failed: Directory not empty it does this for some users only. Mine for instance never errored and completed perfectly from what I can tell (other than the new mail issue below). The server load has skyrocketed though, so that is most likely part of it. Also, while testing this, new mail was not delivered to the maildir but rather to the old mbox in /var/spool/mail/username. The new mail never showed up until I switched the config back over to the mbox settings. Am I missing something here? Thanks for any insight -- Donny B.

2 1

[Dovecot] Question about LDA+spamassassin
by Javier de Miguel Rodríguez 13 Sep '10

13 Sep '10

Hello I am using dovecot 1.2.11 (openexchange not still fully supported with dovecot 2.0). In my setup I use ldap to store quota information, and I want to accomplish the following: per-user spamassassin rules (MDA style), but my setup has the following requeriments: mail_uid= entrega mail_gid= entrega LDA & SIEVE: sieve_dir=/buzones/my_domain/%2.26Hn/%2.200Hn/%n/sieve/ mail_location=maildir:/buzones/my_domain/%2.26Hn/%2.200Hn/%n I have been reading in the wiki, but I am not sure how I can have in $mail_location/user1 a .spamassassin directory per-user and lda+sieve work together to make spam rules by user Regards Javier

1 0

[Dovecot] Dovecot 2.0.2 and Pigeonhole-0.2.0
by Matthias Quernheim 12 Sep '10

12 Sep '10

I upgraded today to Dovecot 2.0.2 and Pigeonhole-0.2.0 based on debian lenny. Looked not to bad, but when I activated sieve in the lda section the following error appeared for each delivery Sep 11 18:13:11 lda: Error: dlopen(/usr/local/lib/dovecot/lda/lib90_sieve_plugin.so) failed: /usr/local/lib/dovecot/lda/lib90_sieve_plugin.so: undefined symbol: tried_default_save Sep 11 18:13:11 lda: Fatal: Couldn't load required plugins I found some hints regarding on old versoin of deliver, but it is the current one. Any ideas? Thanks Matthias

2 1

Re: [Dovecot] lda: internal error
by Dirk Heinrichs 11 Sep '10

11 Sep '10

Am 11.09.2010 12:53, schrieb axel Egal: > all files in /etc/dovecot have already 0666 permission. What about the directory? Bye... Dirk

1 0

[Dovecot] lda: internal error
by axel Egal 11 Sep '10

11 Sep '10

Hi, i'm trying to relay local post from Postfix to Dovecot-lda. It's running on opensuse11.3-64bit with postfix V2.7.1 and dovecot V2.01. sending local message like: echo foo | /usr/sbin/sendmail -f root root gets no logdata in dovecot.err, -.info,-.debug. but the postfix-logfile tells: Sep 11 10:56:12 server postfix/cleanup[3027]: 94027A65BC: message-id=<20100911085612.94027A65BC(a)Server.Firma> Sep 11 10:56:12 server postfix/qmgr[1544]: 94027A65BC: from=<root(a)Server.Firma>, size=277, nrcpt=1 (queue active) Sep 11 10:56:12 server postfix/local[3029]: 94027A65BC: to=<root(a)Server.Firma>, orig_to=<root>, relay=local, delay=0.22, delays=0.14/0.01/0/0.06, dsn=4.3.0, status=deferred (temporary failure. Command output: lda: Error: user root: Error reading configuration: net_connect_unix(/etc/dovecot/dovecot.conf) failed: Permission denied lda: Fatal: Internal error occurred. Refer to server log for more information. ) There is no further loginfo in any other logfiles Is the internal-error a result of wrong parameters?

2 1

[Dovecot] Dovecot 2.0.1 Quota dict timeout
by David Jonas 10 Sep '10

10 Sep '10

Since an upgrade to 2.0.1 from 1.2.x we're seeing this on (mostly) large mailboxes (Maildir) Sep 4 11:27:25 dovecot: dict: mysql: Connected to 192.168.dd.dd (accounts) ... Sep 4 11:27:46 kelly-a dovecot: lda(u1(a)example.com):) msgid=<123@xxx>: saved mail to INBOX Sep 4 11:27:47 dovecot: dict: Error: sql dict: commit failed: Not connected to database Sep 4 11:27:47 dovecot: imap(u1(a)example.com): Error: dict quota: Quota update failed, it's now desynced The dict is MySQL on another server, same switch. It does appear that the quota gets out of sync. From the entries I checked an email is often being delivered shortly before the error (as above). But I also see it happen with the lda: Sep 4 08:27:11 dovecot: pop3(u2(a)example.com): Disconnected: Logged out... Sep 4 08:42:48 dovecot: lda(u2(a)example.com): msgid=<123@aaa>: saved mail to INBOX Sep 4 08:43:26 dovecot: lda(u2(a)example.com): msgid=<123@bbb>: saved mail to INBOX Sep 4 08:43:26 dovecot: dict: Error: sql dict: commit failed: Not connected to database Sep 4 08:43:26 dovecot: lda(u2(a)example.com): Error: dict quota: Quota update failed, it's now desynced Sep 4 08:46:14 dovecot: pop3-login: Login: user=<u2(a)example.com>,... This is happening on two different dovecot servers. The only thing they share is the MySQL server, but it has a load of 0.5 at peak. Is there something that can be tuned to keep this from happening? Possibly relevant entries from `doveconf -n`. Any tuning regarding dict can be assumed as default: maildir_very_dirty_syncs = yes mail_plugins = quota plugin { quota = dict:user:%LTd-%LTn:proxy::quota } Thanks! David

2 6

[Dovecot] nfs director
by Edward avanti 10 Sep '10

10 Sep '10

Halo, Please can you explain why this is advantage over a hardware load balancer. I fail to see advantage if anything it add in more point of failure, with several hundred thousand user, we can ill afford to mess around or add to complexity, sometime keeping it simple is simply way to be, when use qmail/vpopmail, we never had one failure or problem, ever, we very proud of this record so our users. if director service assign 60K user to each front end, how it handle if 5K simultaneous user login, but all 5K happen to be assign to that one machine, it do all work whilst other 7 server sit there do nothing negating what the LB is design for? Is it really worth it? Do we really need this, or just let foundry switch handle it as it does now. We also have 24 front end SMTP server, these deliver mail to netapp filer, all 24 plus 8 pop3 server and 2 webmail imap server all mount /vmail, so all access same maildir. it seem work very effective thus far and for many many year when we use qmail and vpopmail. Thaks

16 48

[Dovecot] Sub-Sub-Subfolders not shown after converting from maildir to mdbox
by Patrick Westenberg 10 Sep '10

10 Sep '10

Hi again, I just recognized a problem concerning subfolders after converting from maildir to mdbox. Thunderbird and SeaMonkey don´t show folders that are subfolders of subfolders. Have a look at the filesystem: discovery:/var/mail/domain.tld/patrick/mdbox/mailboxes/Folder1/Folder2# ls -l insgesamt 8 drwx------ 2 vmail vmail 4096 5. Sep 23:42 dbox-Mails drwx------ 3 vmail vmail 4096 5. Sep 23:42 Folder3 Using Thunderbird or Seamonkey, Folder1 and Folder2 are listed and can be subscribed to but Folder3 never gets listed. If I create Folder4 as a new subfolder from Folder2 it works, so the problem only exists with existing folders from converted maildirs. I had to use a namespace for the convert from my old Courier IMAP. Any hints? Regards Patrick # 2.0.1: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-amd64 x86_64 Debian 5.0.5 auth_mechanisms = plain login mail_gid = vmail mail_location = mdbox:~/mdbox mail_plugins = quota mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = comparator-i;octet comparator-i;ascii-casemap fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { inbox = yes location = prefix = INBOX. separator = . type = private } passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { quota = maildir:User quota } protocols = imap sieve service imap-login { service_count = 1 } service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieve_deprecated { port = 2000 } service_count = 1 } ssl = required ssl_cert = </etc/ssl/certs/imap.crt ssl_key = </etc/ssl/certs/imap.key userdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol imap { mail_plugins = $mail_plugins imap_quota }

3 7

[Dovecot] Released Pigeonhole v0.2.0 for Dovecot v2.0.2
by Stephan Bosch 10 Sep '10

10 Sep '10

Hello Dovecot users, I have finally finished the first release of Pigeonhole for Dovecot v2.0. The most notable change from previous Dovecot v1.2 Sieve/ManageSieve releases is that all is now integrated in a single package and there is no need to patch Dovecot anymore to gain ManageSieve support. Changelog v0.2.0: * Merged Sieve and ManageSieve packages into a single Pigeonhole package. There is also no need to patch Dovecot anymore to gain ManageSieve support. Version numbering of previous Sieve releases is continued as v0.2.0. The sources originally branched off from Sieve v0.1.5 and ManageSieve v0.11.4, but the NEWS history of much more recent releases for Dovecot v1.2 is included since these changes are all included in this release as well. * The ManageSieve service now binds to TCP port 4190 by default due to the IANA port assignment for the ManageSieve service. When upgrading from v1.2, this should be taken into account. The service can be configured manually to listen on both 2000 and 4190. * The Dovecot configuration now calls the ManageSieve protocol 'sieve' in stead of 'managesieve' because it is registered as such with IANA. The binaries and the services are still called managesieve and managesieve-login. * The binary representation of a compiled Sieve script is updated to include source code locations of all commands and arguments. This is implemented in a similar manner as such debug information is included in some system executables and libraries (DWARF-like). Run-time errors can now always refer to the proper line number in the Sieve source script. * The Sieve plugin is adapted to work properly with the new LMTP service introduced with Dovecot v2.0. The same plugin is used for both LDA and LMTP. * The 'sieve_subaddress_sep' setting for the Sieve subaddress extension is now known as 'recipient_delimiter'. Although the deprecated sieve_subaddress_sep setting is still recognized for backwards compatibility, it is recommended to update the setting to the new name, since the new LMTP service also use the recipient_delimiter setting. * ManageSieve: changed default IMPLEMENTATION capability to from 'Dovecot' to 'Dovecot Pigeonhole'. * Renamed the sieved tool to sieve-dump. The original name was somewhat confusing. * Updated man pages to match style and structure of new Dovecot man pages. * Made testsuite commands more uniform and cleaned up many of the testsuite scripts. Some minor new tests were added in the process. + Simplified string matching API to use abstract string lists as data sources. This will also make implementing the index extension easier in the future. + Significantly improved trace debugging with the sieve-test tool. The full execution of the script can be examined, including the matched values and keys of the respective Sieve test commands. The executed statements are listed with their line number (and code address when requested). The level of detail is configurable from the command line. + The SIEVE and NOTIFY capabilities reported by the ManageSieve protocol can now be configured manually. If left unconfigured, the capabilities are determined from the default Sieve and ManageSieve configuration. User-specific capabilities aren't reported until after authentication. + Significantly improved file error handling. This means that administrators get a more useful and informative log message when file operations fail. The most notable example is that when the LDA Sieve plugin is trying to store a binary for a global script, the resulting failure message also points the administrator towards pre-compiling the script with sievec. + Added runtime argument value checking for several commands (redirect, date, vacation). When variables are used, these checks cannot be performed at compiletime. A proper runtime error now is produced when invalid data is encountered. + UTF8 validity of fileinto command argument is now checked either at compile time or at runtime. Previously, it was not checked until the store action was executed. + Validity of IMAP flags for the imap4flags extension is now checked also at runtime. Previously, it was not checked until the store action was executed. + Simplified and restructured error handling. Also made sure that user-caused errors are no longer written to the Dovecot master/LDA log. - Multiscript: fixed duplicate implicit keep caused by erroneous execution state update. - Prevented assertion failure due to currupt binary string representation. If the string was missing a final \0 character an assertion was produced in stead of a binary corruption error. - Imap4flags: fixed bug in setflag command; when parameter was a stringlist, only the last item was actually set. - Variables extension: fixed :length set modifier to recognize utf8 characters in stead of octets. - Testsuite: prevented innocent warning messages, i.e. those that are part of the test, from showing up by default. - ManageSieve/Sieve storage: fixed error handling of PUTSCRIPT commmand; save commit errors would not make the command fail. - ManageSieve: enforced protocol syntax better with some of the commands; some commands allowed spurious extra arguments. - Fixed Sieve script name checking to properly handle length limit and added 0x00ff as invalid character. - Removed spurious old stdio.h (top) includes; these caused compile issues on specific systems. - Fixed default Sieve capability (as reported by ManageSieve): extra extensions spamtest, spamtestplus and virustest were enabled by default. These should, however, only be enabled when properly configured and there is no default configuration. The release is available as follows: http://www.rename-it.nl/dovecot/2.0/dovecot-2.0-pigeonhole-0.2.0.tar.gz http://www.rename-it.nl/dovecot/2.0/dovecot-2.0-pigeonhole-0.2.0.tar.gz.sig Refer to http://pigeonhole.dovecot.org and the Dovecot v2.0 wiki for more information. Have fun testing this first release and don't hesitate to notify me when there are any problems. The bugfixes above are also applied to the Dovecot v1.2 Sieve and ManageSieve sources and I'll produce new releases for those in the next few days. Oh.. and if anyone is wondering what those duplicate notifications are on the dovecot-cvs list.. well.. oops. :) Regards, -- Stephan Bosch stephan(a)rename-it.nl

1 0

[Dovecot] master user login dovecot 2.02 trouble
by Robert Schetterer 09 Sep '10

09 Sep '10

Hi , i got trouble with master login thunderbird anounces no INBOX there at master login also telnet looks strange normal user login 1 login ...... 1 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS QUOTA ACL RIGHTS=texk] Logged in 2 list "" "*" 2 BAD Error in IMAP command : Unknown command. 3 list "" "*" * LIST (\HasNoChildren) "/" "Trash" * LIST (\HasNoChildren) "/" "Junk" * LIST (\HasNoChildren) "/" "Sent" * LIST (\HasNoChildren) "/" "Drafts" * LIST (\HasNoChildren) "/" "Templates" * LIST (\HasNoChildren) "/" "Archives" * LIST (\HasNoChildren) "/" "INBOX" 3 OK List completed. 4 logout master login * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE STARTTLS AUTH=PLAIN AUTH=LOGIN] imap, pop ready 1 login .....*...... 1 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS QUOTA ACL RIGHTS=texk] Logged in 2 list "" "*" * LIST (\Unmarked) "/" "INBOX" 2 OK List completed. 3 logout * BYE Logging out 3 OK Logout completed. something broken ? -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

1 1

[Dovecot] Question on Mail Formats
by Giovanni Giorgi 09 Sep '10

09 Sep '10

Hi, I am still tuning my dovecot, but I find myself very confortable with it. I am going to structure my imap folder with a new namespace (somthing you cannot do with GMail :) and I can choose the mailbox format. What is the difference between the two mailbox format "mbox" and "maildir"? I know mbox is older, but there is a good reason to use maildir instead? I can get for instance some performance improvement? Better archiving? Thank you! -- Senior Consultant http://gioorgi.com

2 1

[Dovecot] LMTP logging configuration
by Rainer Frey 09 Sep '10

09 Sep '10

Hi, I'm using Dovecot 2.0.1, and I log to a custom syslog facility (local0) in the main configuration (I want a separate log file, but I want to make use of rsyslogd's capabilities). I overwrite the syslog facility for LDA (mail) to have all delivery related stuff in /var/log/mail.log, and that works fine. I tried to do the same for LMTP with protocol lmtp { syslog_facility = mail } but this has no effect, LMTP logs to local0. Is this supposed to work, or is this not implemented at all? If not, is using a logfile in main config, but syslog in lmtp supported? Thanks Rainer

2 4

[Dovecot] Dovecot and OpenSSO
by Javier de Miguel Rodríguez 09 Sep '10

09 Sep '10

Has anybody tried to use opensso as authentication source for dovecot ? Maybe using PAM+Opensso? Regards Javier

1 0

[Dovecot] Pigeonhole and Dovecot2 with custom config file
by Cassidy Larson 08 Sep '10

08 Sep '10

I start my dovecot with the "-c /path/to/custom/config" option so I can run multiple instances. Been trying out 2.0.1 so I can upgrade my boxes cleanly, but I require managesieve. So after installing the latest sources of the Pigeonhole plugin, I'm getting this when trying to start dovecot: # /usr/local/sbin/dovecot -c /usr/local/etc/dovecot/dovecot_custom.conf managesieve(root): Fatal: Error reading configuration: net_connect_unix(/usr/local/etc/dovecot/dovecot.conf) failed: No such file or directory doveconf: Error: managesieve-login: dump-capability process returned 89 Running Dovecot 2.0.1 on FreeBSD 8.1. Any help would be appreciated. Thanks! Cassidy

3 4

Re: [Dovecot] Sub-Sub-Subfolders not shown after converting from maildir to mdbox
by Patrick Westenberg 08 Sep '10

08 Sep '10

Timo Sirainen schrieb: > Or just from mdbox:~/mdbox to mdbox:~/mdbox:LAYOUT=maildir++ This doesn´t work: Initialization failed: Namespace 'INBOX.': Mailbox list driver maildir++: maildir_name not supported by this driver or without namespace: Initialization failed: Initializing mail storage from mail_location setting failed: Mailbox list driver maildir++: maildir_name not supported by this driver

1 0

[Dovecot] What's %%h ?
by William Blunn 08 Sep '10

08 Sep '10

What's %%h ? http://wiki2.dovecot.org/Variables says that "%%" expands to "%", so according to that, "%%h" expands to "%h". But I have seen people using "%%h", so it must mean something else. Bill

2 2

[Dovecot] Bad HTML at http://wiki2.dovecot.org/
by William Blunn 07 Sep '10

07 Sep '10

Bad HTML at http://wiki2.dovecot.org/ <div style="padding: 0.2em; background-color: #50bead"> This documentation is for<strong>Dovecot v2.0</strong>, see<a href="http://wiki1.dovecot.org/ <view-source:http://wiki1.dovecot.org/>">wiki1</a> for v1.x documentation.</a> </div> After "documentation." there is a closing</a> tag with no corresponding opening tag. A similar issue appears on http://wiki.dovecot.org/ Bill

2 1

[Dovecot] Problems setting up dovecot 2.0.1 with kerberos auth
by Dirk Heinrichs 07 Sep '10

07 Sep '10

Hi, I'm trying to setup dovecot 2.0.1 on a debian squeeze test box. I want to integrate it into an already working kerberos5 setup, but I don't get it to work. I've added created host/ smtp/ and imap/ service principals with random key for the test machine and added them to its keytab. I can also obtain user credentials using kinit, but when I try to telnet to port 143, I only get the following: # kinit heini Password for heini(a)ALTUM.DE: # klist Ticket cache: FILE:/tmp/krb5cc_0 Default principal: heini(a)ALTUM.DE Valid starting Expires Service principal 09/05/10 18:56:30 09/06/10 04:56:30 krbtgt/ALTUM.DE(a)ALTUM.DE renew until 09/06/10 18:56:27 # telnet localhost 143 Trying 127.0.0.1... Connected to localhost (127.0.0.1). Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=GSSAPI] Dovecot ready. a authenticate GSSAPI a NO [UNAVAILABLE] Temporary authentication failure. ^] telnet> Connection closed. This is in the logs: Sep 5 18:56:47 oldbox dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Sep 5 18:56:47 oldbox dovecot: auth: Debug: auth client connected (pid=27684) Sep 5 18:56:58 oldbox dovecot: auth: Debug: client in: AUTH#0111#011GSSAPI#011service=imap#011secured#011lip=127.0.0.1#011rip=127.0.0.1#011lport=143#011rport=33753 Sep 5 18:56:58 oldbox dovecot: auth: Debug: gssapi(?,127.0.0.1): Obtaining credentials for imap@rohan Sep 5 18:56:58 oldbox dovecot: auth: gssapi(?,127.0.0.1): While acquiring service credentials: Unspecified GSS failure. Minor code may provide more information Sep 5 18:56:58 oldbox dovecot: auth: gssapi(?,127.0.0.1): While acquiring service credentials: Permission denied Sep 5 18:57:00 oldbox dovecot: auth: Debug: client out: FAIL#0111#011temp Sep 5 18:57:05 oldbox dovecot: imap-login: Disconnected (auth failed, 1 attempts): method=GSSAPI, rip=127.0.0.1, lip=127.0.0.1, mpid=0, secured My configuration: # doveconf -n # 2.0.1 (a05834588ffb): /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-486 i586 Debian squeeze/sid auth_debug = yes auth_gssapi_hostname = rohan auth_krb5_keytab = /etc/krb5.keytab auth_mechanisms = gssapi auth_verbose = yes disable_plaintext_auth = no listen = * mail_location = maildir:~/mail managesieve_notify_capability = mailto managesieve_sieve_capability = comparator-i;octet comparator-i;ascii-casemap fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap ssl = no ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = uid=vmail gid=vmail home=/var/vmail/%u driver = static } And here's the content of the kerberos keytab: # ktutil ktutil: rkt /etc/krb5.keytab ktutil: l slot KVNO Principal ---- ---- --------------------------------------------------------------------- 1 3 host/oldbox.altum.de(a)ALTUM.DE 2 3 host/oldbox.altum.de(a)ALTUM.DE 3 3 host/oldbox.altum.de(a)ALTUM.DE 4 3 host/oldbox.altum.de(a)ALTUM.DE 5 3 imap/oldbox.altum.de(a)ALTUM.DE 6 3 imap/oldbox.altum.de(a)ALTUM.DE 7 3 imap/oldbox.altum.de(a)ALTUM.DE 8 3 imap/oldbox.altum.de(a)ALTUM.DE 9 3 smtp/oldbox.altum.de(a)ALTUM.DE 10 3 smtp/oldbox.altum.de(a)ALTUM.DE 11 3 smtp/oldbox.altum.de(a)ALTUM.DE 12 3 smtp/oldbox.altum.de(a)ALTUM.DE I also don't see any connection attempt in the KDC's log file. Any idea what could be wrong? Thanks... Dirk

2 6

[Dovecot] dovecot-uidlist: Duplicate file entry at line
by Luca Palazzo 07 Sep '10

07 Sep '10

Hi All, we are experiencing another strange problem after upgrading to 2.0.1 from 1.2. Many people's client aree-retrieving mail from server due to some problem with dovecot-uidlist file. Looking at log file seem that all file content is sometime duplicated and appended to the and of same file. It look as another process was accesing and trying to modify uidlist table. Our setup has a load balance (dovecot director) and three backend server. All of them use 2.0.1. MTA is a cluster of postfix that deliver mail to load balancer by LMTP. How can I collect some more information? or, better, solve it? Regards Luca PS: Backend configuration is: # 2.0.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-686-bigmem i686 Debian 5.0.5 auth_master_user_separator = * auth_verbose = yes disable_plaintext_auth = no mail_location = maildir:~/Maildir mail_plugins = $mail_plugins notify mail_log quota managesieve_notify_capability = mailto managesieve_sieve_capability = comparator-i;octet comparator-i;ascii-casemap fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date spamtest spamtestplus virustest passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid from size quota = maildir:User quota quota_warning = storage=95%% quota-warning.sh 95 %u quota_warning2 = storage=80%% quota-warning.sh 80 %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = /etc/dovecot/sieve/global/ sieve_global_path = /etc/dovecot/sieve/default.sieve } protocols = imap pop3 lmtp sieve service auth { unix_listener auth-userdb { group = dovecot mode = 0600 user = dovecot } } service director { inet_listener { port = 8100 } } service lmtp { inet_listener lmtp { address = 10.194.1.31 127.0.0.1 ::1 port = 24 } } service managesieve-login { inet_listener sieve { address = 10.194.1.31 127.0.0.1 ::1 port = 4190 } process_min_avail = 0 service_count = 1 } service quota-warning { executable = script /virtual/shared/quota-warning.sh unix_listener quota-warning { user = vmail } user = dovecot } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } verbose_proctitle = yes protocol lmtp { mail_plugins = $mail_plugins quota sieve } protocol lda { mail_plugins = $mail_plugins quota } protocol imap { mail_plugins = $mail_plugins quota imap_quota } protocol pop3 { mail_plugins = $mail_plugins quota }

4 19

[Dovecot] Dovecot director - silly questions
by Guy 07 Sep '10

07 Sep '10

Hi, I'm currently using Dovecot 1.1.18 with storage over NFS and there's been the occasional corrupt index. I'm going to be installing a new set of servers soon and would like to start using Dovecot 2.0. I've had a look at the bit there is on the new Dovecot director, but I'm not totally sure how it's intended to be used. Should I install Dovecot on the software load balancers (IMAP/POP3 and other services balanced by haproxy) and configure the director on there? I'm also using maildrop at the moment but would like to switch to Dovecot deliver at some stage. Since mail is delivered to a random mail server (they both have access to the NFS shares), won't I run into the same index problem? Should I look at per user transports before then or can director also be used to effect Dovecot deliver? Thanks Guy -- Don't just do something...sit there!

2 1

[Dovecot] cant see public mailbox
by spamvoll＠googlemail.com 07 Sep '10

07 Sep '10

hi.. im running dovecot 2.0.1 sharing mailboxes works like a charm, but now im trying to create a public undetected-SPAM folder. thunderbird shows the public namespace but no mailboxes. ive created the public folder and did a mkdir for the folder.. after that doesnt work ive created cur,new,tmp in .undetected-SPAM /home/MAILBOXES/public# ls -al drwx------ 3 vmail vmail 74 7. Sep 14:23 . drwxr-xr-x 57 vmail vmail 4096 7. Sep 14:23 .. -rw------- 1 vmail vmail 0 7. Sep 14:23 dovecot-acl-list -rwx------ 1 vmail vmail 0 7. Sep 13:19 dovecot-shared drwx------ 5 vmail vmail 36 7. Sep 14:17 .undetected-SPAM doveconf -n mail_location = maildir:~/mail namespace { inbox = yes location = prefix = separator = / type = private } namespace { list = children location = maildir:%%h/mail:INDEX=~/mail/shared/%%u prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace { list = children location = maildir:/home/MAILBOXES/public:INDEX=~/mail/public prefix = public/ separator = / subscriptions = no type = public } any ideas ? Hans

1 1

[Dovecot] v1.2.14 released
by Timo Sirainen 07 Sep '10

07 Sep '10

http://dovecot.org/releases/1.2/dovecot-1.2.14.tar.gz http://dovecot.org/releases/1.2/dovecot-1.2.14.tar.gz.sig + virtual mailboxes: Added support for IDLE notifications. - master: Don't crash on config reload when using dict processes. - IMAP: QRESYNC parameters for SELECT weren't handled correctly.

2 1

[Dovecot] Plugin execution order and Sieve
by Charly 07 Sep '10

07 Sep '10

Hello, I use dovecot 2.0.1 and pigeonhole Sieve (version of August), I try to create a deliver plugin (lda or lmtp), but if I declare, in addition to my plugin, sieve, sieve is called first, and my plugin is never called. I tried to change the order of declaration of plugins, but nothing changes. If I remove Sieve, my plugin is properly called. protocol lmtp { #mail_plugins = $mail_plugins myplugin sieve ## sieve called first, my plugin is never called #mail_plugins = $mail_plugins sieve myplugin ## sieve called first, my plugin is never called mail_plugins = $mail_plugins myplugin ## my plugin is called } I try to patch Pigeonhole Sieve to call other plugin at the end of execution with : --- dovecot-2-0-pigeonhole-d51650c8af85/src/plugins/lda-sieve/lda-sieve-plugin.c.next_deliver 2010-08-23 19:26:12.000000000 +0200 +++ dovecot-2-0-pigeonhole-d51650c8af85/src/plugins/lda-sieve/lda-sieve-plugin.c 2010-09-02 11:48:22.000000000 +0200 @@ -775,7 +775,8 @@ } T_END; - return ret; + //return ret; + return next_deliver_mail(mdctx,storage_r); } /* With this patch, my plugin is called, but, always AFTER Sieve... How can I call my plugin before Sieve and do I need to patch Pigeonhole Sieve ? Thank you, Charly.

2 2

[Dovecot] LAYOUT=maildir++ under mbox?
by William Blunn 06 Sep '10

06 Sep '10

Whilst documenting LAYOUT=maildir++ under dbox, that got me thinking: Can we specify :LAYOUT=maildir++ with mbox? If I have it right, this should then remove the problem of not being able to have messages and mail subfolders in the same mail folder. So for example if we had mail location specified as: mail_location = mbox:~/mail:LAYOUT=maildir++ we would have files: ~/mail/inbox - file storing messages in INBOX ~/mail/.foo - file storing messages in mail folder "foo" ~/mail/.foo.bar - file storing messages in mail folder "foo/bar" and I think all of Dovecot's indexes would go under ~/mail/.imap Bill

3 8

[Dovecot] extended search
by Daniel-Constantin Mierla 06 Sep '10

06 Sep '10

Hello, is it safe to use arg_new_human_date() from src/lib-storage/mail-search-register-human.c instead of arg_new_date() inside src/lib-storage/mail-search-register-imap.c? The benefit is ability to use interval based search rules, e.g., SINCE 2days. I run it for couple of days and looks fine, used for virtual folders. This kind of search I missed for usage on laptop - I have pretty huge inboxes, thunderbird was over 20% CPU all the time. I switched on using dovecot locally and thunderbird connected to it, my common searches (before: thunderbird's "save as folder" searches) are virtual folders. Everything works great, cpu usage is less than 1% (I have to say that I also moved many filtering rules (for sorting incoming messages to folders) from TB to be done by imapfilter, but the reason was mainly sorting flexibility and rescanning folders). If all is safe, would it be considered for addition in the future version? The patch is trivial, I can leave with patching every release, but I believe is a nice thing to have. Afaik, should not break IMAP SEARCH specs, being an extended version. An alternative would be to add 'X-' commands (e.g., X-SINCE 2days). Thanks, Daniel -- Daniel-Constantin Mierla http://www.asipto.com

2 4

[Dovecot] Problems with zlib
by Andre 06 Sep '10

06 Sep '10

Sometimes I see lines like these in my log: 20100906 11:34:32 imap(username(a)domain.com): Panic: file istream-zlib.c: line 173 (i_stream_zlib_read): assertion failed: (zstream->high_pos == 0) 20100906 11:34:32 imap(username(a)domain.com): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0 [0x7f328d2244a2] -> /usr/lib/dovecot/libdovecot.so.0 [0x7f328d22450a] -> /usr/lib/dovecot/libdovecot.so.0(i_error+0) [0x7f328d2248b3] -> /usr/lib/dovecot/modules/lib20_zlib_plugin.so [0x7f328be444fc] -> /usr/lib/dovecot/libdovecot.so.0(i_stream_read+0x6b) [0x7f328d22a10b] -> /usr/lib/dovecot/libdovecot.so.0(i_stream_read_data+0x4d) [0x7f328d22a3fd] -> /usr/lib/dovecot/libdovecot.so.0 [0x7f328d21476e] -> /usr/lib/dovecot/libdovecot.so.0 [0x7f328d214cbe] -> /usr/lib/dovecot/libdovecot.so.0(message_parser_parse_next_block+0x29) [0x7f328d2148c9] -> /usr/lib/dovecot/libdovecot.so.0(message_parser_parse_body+0x23) [0x7f328d214a43] -> /usr/lib/dovecot/libdovecot-storage.so.0 [0x7f328d4cb72f] -> /usr/lib/dovecot/libdovecot-storage.so.0 [0x7f328d4cb84a] -> /usr/lib/dovecot/libdovecot-storage.so.0(index_mail_get_special+0x3dc) [0x7f328d4cc99c] -> /usr/lib/dovecot/libdovecot-storage.so.0 [0x7f328d4dd86d] -> dovecot/imap [username(a)domain.com 192.168.4.253 UID] [0x41256a] -> dovecot/imap [username(a)domain.com 192.168.4.253 UID](imap_fetch_more+0x16c) [0x412b0c] -> dovecot/imap [username(a)domain.com 192.168.4.253 UID](cmd_fetch+0x3fa) [0x40acea] -> dovecot/imap [username(a)domain.com 192.168.4.253 UID] [0x41031c] -> dovecot/imap [username(a)domain.com 192.168.4.253 UID] [0x4103cd] -> dovecot/imap [username(a)domain.com 192.168.4.253 UID](client_handle_input+0x45) [0x410545] -> dovecot/imap [username(a)domain.com 192.168.4.253 UID](client_input+0x62) [0x410f72] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0xcb) [0x7f328d22f3ab] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x18) [0x7f328d22e4c8] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f328d21dd63] -> dovecot/imap [username(a)domain.com 192.168.4.253 UID](main+0x281) [0x419201] -> /lib/libc.so.6(__libc_start_main+0xe6) [0x7f328caa81a6] -> dovecot/imap [username(a)domain.com 192.168.4.253 UID] [0x408bd9] Here is the backtrace: [New process 11474] #0 0x00007f328cabbed5 in raise () from /lib/libc.so.6 (gdb) bt #0 0x00007f328cabbed5 in raise () from /lib/libc.so.6 #1 0x00007f328cabd3f3 in abort () from /lib/libc.so.6 #2 0x00007f328d2244b5 in ?? () from /usr/lib/dovecot/libdovecot.so.0 #3 0x00007f328d22450a in ?? () from /usr/lib/dovecot/libdovecot.so.0 #4 0x00007f328d2248b3 in i_panic () from /usr/lib/dovecot/libdovecot.so.0 #5 0x00007f328be444fc in ?? () from /usr/lib/dovecot/modules/lib20_zlib_plugin.so #6 0x00007f328d22a10b in i_stream_read () from /usr/lib/dovecot/libdovecot.so.0 #7 0x00007f328d22a3fd in i_stream_read_data () from /usr/lib/dovecot/libdovecot.so.0 #8 0x00007f328d21476e in ?? () from /usr/lib/dovecot/libdovecot.so.0 #9 0x00007f328d214cbe in ?? () from /usr/lib/dovecot/libdovecot.so.0 #10 0x00007f328d2148c9 in message_parser_parse_next_block () from /usr/lib/dovecot/libdovecot.so.0 #11 0x00007f328d214a43 in message_parser_parse_body () from /usr/lib/dovecot/libdovecot.so.0 #12 0x00007f328d4cb72f in ?? () from /usr/lib/dovecot/libdovecot-storage.so.0 #13 0x00007f328d4cb84a in ?? () from /usr/lib/dovecot/libdovecot-storage.so.0 #14 0x00007f328d4cc99c in index_mail_get_special () from /usr/lib/dovecot/libdovecot-storage.so.0 #15 0x00007f328d4dd86d in ?? () from /usr/lib/dovecot/libdovecot-storage.so.0 #16 0x000000000041256a in ?? () #17 0x0000000000412b0c in imap_fetch_more () #18 0x000000000040acea in cmd_fetch () #19 0x000000000041031c in ?? () #20 0x00000000004103cd in ?? () #21 0x0000000000410545 in client_handle_input () #22 0x0000000000410f72 in client_input () #23 0x00007f328d22f3ab in io_loop_handler_run () from /usr/lib/dovecot/libdovecot.so.0 #24 0x00007f328d22e4c8 in io_loop_run () from /usr/lib/dovecot/libdovecot.so.0 #25 0x00007f328d21dd63 in master_service_run () from /usr/lib/dovecot/libdovecot.so.0 #26 0x0000000000419201 in main () here is the relevant plugin section: plugin { zlib_save = gz zlib_save_level = 6 } What can I do to investigate deeper? TIA Andre

2 1

Re: [Dovecot] dovecot Digest, Vol 89, Issue 27
by Alan Brown 06 Sep '10

06 Sep '10

> > Timo Sirainen <tss(a)iki.fi> Wrote: > > > > > On Mon, 2010-09-06 at 14:26 +0100, Alan Brown wrote: > > > > Is there any way of enforcing a Maildir per-folder message limit in > > > > Dovecot? > > > > > No. > > > > Would you consider it as a feature request? > What if you just create a script that automatically archives older mails to <box>/archive/yyyy-mm mailboxes when number of messages in a mailbox increases too high for too long? Or something like that. I'm looking at doing that anyway, however it would be much easier to train the users if the server says "folder full"

1 0

Re: [Dovecot] dovecot Digest, Vol 89, Issue 25
by Alan Brown 06 Sep '10

06 Sep '10

Timo Sirainen <tss(a)iki.fi> Wrote: > On Mon, 2010-09-06 at 14:26 +0100, Alan Brown wrote: > > Is there any way of enforcing a Maildir per-folder message limit in > > Dovecot? > No. Would you consider it as a feature request? > > We're finding major performance hits once a threshold of files/directory > > is exceeded. This applies across all common filesystems with the > > threshold differing depending on the FS. GFS2 pretty much _STOPS_ for 10 > > minutes when users put 65k+ messages in one folder... > mdbox would probably work nicely. :) Yes, it probably would, however I have several layers of resistance to get past in order to implement that (ie, up to 2 years to get approval to switch to dbox) > > I'm currently running 1.1.20 but looking to update (RHEL5 cluster > > installation) > With v1.2+ you could also try maildir_very_dirty_syncs=yes That won't help much for initial directory opens, which is where most of the pain is. Past that point, the index of ~/Maildir/.folder/cur is mostly cached until you hit about 16,000 messages(files) on GFS2 and some people are insisting on 32k+ files in one folder with the odd few trying 65k or more (I'm surprised their clients don't break). For info sake: we have Dovecot running on a pair of dedicated dual E5530 (quad-core X86 1300MHZ FSB cpu) servers (RH cluster+GFS2) with 24Gb RAM apiece and ~2TB of 8Gb/s san-attached storage available. There are only ~250 accounts but there's around 600Gb in the maildir folder areas and another 300Gb in a separate dedicated inbox area - and I believe there's another 1TB of stuff in client local folders we're trying to pull back to the servers in order to simplify backups. Even with this kind of horsepower available, over-large folders can render the setup completely unresponsive for minutes at a time. I know this is a case of "work smarter, not harder", but I'm facing major delays until we're able to change the on-disk storage format. Alan

2 1

Re: [Dovecot] dovecot Digest, Vol 89, Issue 26
by Alan Brown 06 Sep '10

06 Sep '10

Timo Sirainen <tss(a)iki.fi> Wrote: >On Mon, 2010-09-06 at 12:37 +0100, William Blunn wrote: > > Whilst documenting LAYOUT=maildir++ under dbox, that got me thinking: > > > > Can we specify :LAYOUT=maildir++ with mbox? > Yes, ever since LAYOUT was added. > > If I have it right, this should then remove the problem of not being > > able to have messages and mail subfolders in the same mail folder. > Yes. Also it might be possible to use DIRNAME with LAYOUT=fs to solve > that problem, but I'm less sure about that. I anyway doubt most mbox > users want to switch to a whole new layout. Mbox users might not, but Maildir or dbox users might want to, especially if users have a lot of folders (One of mine has ~2500) Directories definitely get slower to list with more files/subdirectories in them and there are knee points beyond which they get substantially slower (Where the knee is depends on the type of FS but it's usually a power of 2)

1 0

[Dovecot] mdbox: Cannot create subfolder called "dbox-Mails" (2.0beta5)
by William Blunn 06 Sep '10

06 Sep '10

I am trying out "mdbox" under Dovecot 2.0beta5. Looking in the "mailboxes" directory under the mdbox storage root ("~/dbox" in my case), I can see that the mail folders are mapped into filesystem directories. But Dovecot seems to put all the message list information ("dovecot.index.cache", "dovecot.index.log") for any given mail folder into a directory called "dbox-Mails"... But this directory name exists in the same namespace as that used for mail subfolders... So this means we cannot create a mail subfolder whose name is "dbox-Mails"! I concede that this eventuality may be unlikely, but when designing in a green field, surely we should avoid such obvious pitfalls? Surely we would want to make it so that these objects exist in different namespaces, so that mail folders can be created with any name? So perhaps the directory "dbox-Mails" should use a character in its name which could not be used in mail folder names. Or mail folder names could have a non-identity mapping into directory names such that the directory name can never be "dbox-Mails". Regards, Bill

4 14

[Dovecot] Specify auth service for protocols
by Lukas Garberg 06 Sep '10

06 Sep '10

Hi all, I'm building a mail system where two machines are functioning both as POP3/IMAP-proxy (using dovecot 1.2.12) and SMTP-server with authentication for outgoing mail. The SMTP-server is postfix with dovecot SASL as authentication backend. User credentials for SMTP auth as well as the mapping from account to final server for the proxy is stored in a MySQL-database which dovecot queries. As I want the POP3/IMAP-proxy to accept any username and password (as the final POP3/IMAP server takes care of the authentication) the passdb SQL query has the statements "NULL AS password, 'Y' AS nopassword, 'Y' AS proxy" added to the query. As these additions cannot be used in the SQL query for the auth service used by postfix (as users would be able to authenticate with any password) I have defined a second auth service (auth postfix { ... }) in dovecot.conf which is slightly different; it returns the password hash instead of NULL as password and skips the proxy and nopasswd part. This works fine on one server, but on the other one the auth services get mixed up and the service defined for postfix (missing password and proxy stuff) is used by the POP3 and IMAP services and vice versa, which breaks the proxying. I've been trying my best to find any difference between the configuration of the two machines, but without result. The configurations are simply copies of each other. So, to finally arrive at my question: Is there any way to specify which authentication service is to be used by each protocol in dovecot.conf? Or is the solution instead to rewrite the passdb-query to take the service into account and return 'Y' AS proxy when the service is postfix and 'N' AS proxy when the service is POP3 or IMAP as I then would be able to use only one authentication backend? Sorry for the lengthy post and thank you in advance! Regards, Lukas Garberg

2 2

[Dovecot] notification plugin
by Wolfgang Rosenauer 06 Sep '10

06 Sep '10

Hi, I'm pretty new to dovecot's codebase and trying to write a plugin which performs certain plugins if new mail arrives in a user's mailbox. I saw the mail-log plugin and was playing around with it but it seems to not create events if new mails arrive but only if mail are copied or saved from an IMAP connection. Are there any hooks I can base my plugin on to get events in the above case? Any pointers? Thanks, Wolfgang

2 3

[Dovecot] Quotas - per folder message limits?
by Alan Brown 06 Sep '10

06 Sep '10

Is there any way of enforcing a Maildir per-folder message limit in Dovecot? We're finding major performance hits once a threshold of files/directory is exceeded. This applies across all common filesystems with the threshold differing depending on the FS. GFS2 pretty much _STOPS_ for 10 minutes when users put 65k+ messages in one folder... I'm currently running 1.1.20 but looking to update (RHEL5 cluster installation)

2 1

[Dovecot] Documentation for "altpath" / "altmove" / ?"Alternate storage"
by William Blunn 06 Sep '10

06 Sep '10

I was thinking about documentation for alternate storage. We have a few mentions at: http://wiki2.dovecot.org/MailboxFormat/dbox http://wiki2.dovecot.org/Tools/Doveadm http://wiki2.dovecot.org/Tools/Doveadm/Altmove But I was thinking it would be helpful if there could be a page about alternate storage. I could write the page, but I currently have so many unknowns that I think it would be better to gather some more information before writing the first draft. Note that I don't necessarily fully understand all the surrounding concepts, so I could have written something below which is based on a (vague) belief. Please correct me if I am wrong, or even if it's sort-of right but doesn't quite hit the point squarely. We might want to have a name for the wiki page. Perhaps "AlternateStorage"? Of course if it only applies to dbox, then another idea is to make it a section on the page "MailboxFormat/dbox". All suggestions gratefully received. I would be interested in an overview of what alternate storage is. It seems to be a way of transparently moving message data to alternare storage, with the idea that the alternate storage may be on a different filesystem which may be cheaper and/or slower than the main storage, which may be an economic way to store messages where the fastest access to them is less important. It is transparent in as much as IMAP/POP users will not normally be able to tell if any given message has been moved to alternate storage. A single mail folder can end up containing a mixture of messages stored in main storage and alternate storage. (Another question begged here of what consistent term should be used to refer to the main storage. Could be "main storage", "normal storage", "ordinary storage".) Also I would be interested to know the development/stability status of alternate storage: experimental / alpha / beta / stable. Also I would be interested to know the applicability against mailbox formats: mbox / maildir / sdbox / mdbox / cydir. Also I would be interested to know which data gets moved to the alternate storage, and which data stays in the main storage: message-data / control-data / index-data / combined-control-and-index-data. Also I would be interested to know how data can be moved to alternate storage. Seems to be that is only done by invocation of "doveadm altmove". There is a page for that already so we can link to that. Also it would be interesting to have some idea of how it works. For example there might be an "alternate storage" flag in the indexes, or Dovecot tries the main location first and if not found there then it tries the alternate storage. Just a brief overview, and any pertinent ramifications of that. Bill

2 4

Re: [Dovecot] \" character in folder name results in strange LIST
by Samuel Kvasnica 06 Sep '10

06 Sep '10

Hi Timo, >> * LIST (\HasNoChildren) "/" "folder1" >> * LIST (\HasNoChildren) "/" "folder2" >> * LIST (\HasNoChildren) "/" {9} >> six"wafer >> . OK List completed. >> >> Note the {9} length of the following real folder name. Is this normal >> handling of special folder names ? >Yes. Well, I did try other servers and e.g. on scalix I'm getting this: * LIST (\X-DirectRef=000d7f94a4731510 \X-ModDate=20100814200222) "/" "six\"wafer" I cannot find anything relevant in RFC3501 >> Mail clients do not seem to like this response. >What clients? They're buggy then.. Well, of course, way too many clients are :( at least Thunderbird will go totally crazy when getting this kind response. (My old python scripts expecting string, not a tuple go crazy as well... :-< )

5 26

[Dovecot] Alternate mail_location prefix for homedir
by Henry C. 05 Sep '10

05 Sep '10

Hi, I'm switching from UW-imap to dovecot 2.0.1 and was wondering about the mail_location config: mail_location = mbox:~/.:INBOX=/var/mail/%u Notice '.' in '~/.' above. This seems to resolve the ~/mail problem when switching from UW-imap (ie, no 'mail' prefix). doc/wiki/Migration.UW.txt doesn't mention using '~/.', so I was wondering whether there are any gotchas anyone can think of. Thanks Henry

3 2

[Dovecot] psr2md
by Benoit LORAND 05 Sep '10

05 Sep '10

hello, I just write script who converts outlook pst files to the maildir format. I want to share it to community. I have tried it with outlook 2003 and outlook 2007. http://www.blorand.org/index.php/Pst2md i hope it will help someone. -- Benoît LORAND http://www.blorand.org benoit.lorand(a)blorand.org

1 0

Re: [Dovecot] Problems with dovecot 2.0, sieve and mdbox
by Patrick Westenberg 04 Sep '10

04 Sep '10

Why so complicated?   ---- Originalnachricht ---- Von: fakessh <fakessh(a)fakessh.eu> Gesendet: 4 Sep 2010 17:31 +02:00 An: Patrick Westenberg <pw(a)wk-serv.de> CC: <dovecot(a)dovecot.org> Betreff: Re: [Dovecot] Problems with dovecot 2.0, sieve and mdbox On Sat, 04 Sep 2010 15:27:26 +0200, Patrick Westenberg <pw(a)wk-serv.de> wrote: > Hi guys, > > I tried to use a global sieve skript to sort spam mails into > a subfolder of INBOX. I´m using mdbox. > > The log shows that the script is called and executed but it is > not able to find or create the mailbox: > > Sep 4 15:18:55 mercury dovecot: lmtp(6237, mail(a)steulerfliesen.de) > Debug: Namespace : Permission lookup failed from > /var/mail/steulerfliesen.de/mail/mdbox/mailboxes/Spamverdacht > Sep 4 15:18:55 mercury dovecot: lmtp(6237, mail(a)steulerfliesen.de) > Debug: Namespace : Using permissions from > /var/mail/steulerfliesen.de/mail/mdbox: mode=0700 gid=-1 > > Sep 4 15:22:37 mercury dovecot: lmtp(6261, mail(a)steulerfliesen.de) > Debug: Namespace : Permission lookup failed from > /var/mail/steulerfliesen.de/mail/mdbox/mailboxes/INBOX.Spamverdacht > Sep 4 15:22:37 mercury dovecot: lmtp(6261, mail(a)steulerfliesen.de) > Debug: Namespace : Using permissions from > /var/mail/steulerfliesen.de/mail/mdbox: mode=0700 gid=-1 > > My skript looks like this: > > require "fileinto"; > if header :contains "X-Spam-Flag" "YES" { > fileinto "Spamverdacht"; > } > > I also tried: > > require "fileinto"; > if header :contains "X-Spam-Flag" "YES" { > fileinto "INBOX.Spamverdacht"; > } > > How can I fix this? > > Regards > Patrick the script should be require ["fileinto","regex","comparator-i;ascii-numeric","reject","relational"]; # rule:[spammanage-before] if header :value "ge" :comparator "i;ascii-numeric" ["X-Spam-score"] ["500"] { discard; stop; } if header :value "ge" :comparator "i;ascii-numeric" ["X-Spam-score"] ["100"] { fileinto "Junk.spam"; stop; } if header :value "ge" :comparator "i;ascii-numeric" ["X-Spam-score"] ["10"] { fileinto "Junk"; } elsif anyof ( header :contains "Received" [ "[4.63. "[218.160.", "[218.242.]" ] ) { fileinto "Junk"; } elsif anyof ( header :contains ["SPAM", "X-Spam-hits"] ["ADDRESSES_ON_CD", "X_OSIRU_DUL", "X_OSIRU_SPAMWARE_SITE", "X_OSIRU_SPAM_SRC" ] ) { fileinto "Junk"; }

1 0

[Dovecot] fts, solr, and client support
by Kelsey Cummings 04 Sep '10

04 Sep '10

I've been playing around with the fts plugins and currently have solr up and running. While the initial indexing time is pretty rough, the search performance is impressive. I've run into a problem though- so far as I can tell, thunderbird (and most other popular clients?) won't actually take advantage of it. Even using thunderbird's advanced search and checking the 'run serach on server' box doesn't push the search to the server. If most popular clients don't support it, there doesn't seem much point in setting it up; which is a shame, solr beats the snot out of the built in search for thunderbird. That said, is anyone running any of the fts plugins in a large scale environment? If so, what kind of scaling issues do you see? How do the search servers compare hardware wise to users count/spool size? -- Kelsey Cummings - kgc(a)corp.sonic.net sonic.net, inc. System Architect 2260 Apollo Way 707.522.1000 Santa Rosa, CA 95407

1 0

[Dovecot] a question about QRESYNC extension
by Joe Wong 04 Sep '10

04 Sep '10

Hi Timo, How long is the MODSEQ NUMBER kept for each UID ever exists in the mailbox? - Joe

2 3

[Dovecot] user/domain-dependent autosubscribe ?
by Per Jessen 03 Sep '10

03 Sep '10

Newbie alert! Dovecot 2.0rc3 I've got autosubscribe working very well, but I need to make it dependent on the domain - e.g. domain example.com will have folders (a,b,c), while domain example2.com will have (d,e,f). Any hints on how to achieve that? /Per Jessen, Zürich

2 2

[Dovecot] SIS for maildir?
by Mike Abbott 03 Sep '10

03 Sep '10

When might deduplication of attachments work with maildir?

2 2

[Dovecot] Best way to migrate from qmail-ldap's autoreply?
by Attila Nagy 03 Sep '10

03 Sep '10

Hi, qmail-ldap uses four LDAP attributes for handling autoreplies in qmail-local: - deliverymode (to see whether the autoreply should be send) - mailreplytext, which is a base64 encoded multiline string* - mailreplystart and mailreplystop, unix dates I'm wondering how this could be handled with Dovecot (2.0) in the most easier way. All I could find out so far: - patching the code - writing a plugin (it it possible to get these LDAP attributes in the LMTPd with a single userdb-lookup and get it from the plugin during a new mail event? Any examples?) - conditionally provide these values to a sieve script and process them accordingly (the base64 string and maybe the dates seem to be hard for the first glimpse) the mad stuff: - using an LD_PRELOAD library, which emulates per user sieve scripts according to LDAP lookups (gives a lot more flexibility) - an LMTP proxy/server, which does all this and forwards the traffic to the Dovecot LMTPd/deliver process * a sample mailreplytext looks like this: '''%HEADER% Content-type: text/plain; charset="utf-8" távol vagyok''' (of course this is in UTF-8).

3 2

[Dovecot] Maybe wrong quota recalculation behaviour on overquota delivery try
by Luca Palazzo 03 Sep '10

03 Sep '10

Hi all, we are experencing some, may be strange, slowness in our dovecot/postfix mail system. We have three dovecot 2.0.1 server with LMTP, POP3 and IMAP enabled. Three shared OCFS2 filesystem are used for mail storage. We have too a load balancer based on dovecot director in front of these three server. Our SMTP cluster receives mail and send by LMTP to load balancer. Everything work flowless, but sometime, under heavy load, three server slow down a lot. Our mail gateway logs a lot of: status=deferred (host 10.194.1.20[10.194.1.20] said: 451 4.4.0 Remote server not answering (DATA output timeout) IP 10.194.1.20 is dovecot director. Looking at mbox servers log nothing seem to happen, but stracing lmtp process we can see stat system calls to all Maildir files, as if dovecot was recalculating quota and regenerating maildirsize file. It happens always when LMTP tries to deliver a mail to an overquota account. Is this possible and right? How can we look deeper in system to have more information? Best regards Luca PS: dovecot configuration for maildir servers is: # 2.0.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-686-bigmem i686 Debian 5.0.5 auth_master_user_separator = * auth_verbose = yes disable_plaintext_auth = no mail_location = maildir:~/Maildir mail_plugins = $mail_plugins notify mail_log quota managesieve_notify_capability = mailto managesieve_sieve_capability = comparator-i;octet comparator-i;ascii-casemap fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date spamtest spamtestplus virustest passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid from size quota = maildir:User quota quota_warning = storage=95%% quota-warning.sh 95 %u quota_warning2 = storage=80%% quota-warning.sh 80 %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = /etc/dovecot/sieve/global/ sieve_global_path = /etc/dovecot/sieve/default.sieve } protocols = imap pop3 lmtp sieve service auth { unix_listener auth-userdb { group = dovecot mode = 0600 user = dovecot } } service director { inet_listener { port = 8100 } } service lmtp { inet_listener lmtp { address = 10.194.1.31 127.0.0.1 ::1 port = 24 } } service managesieve-login { inet_listener sieve { address = 10.194.1.31 127.0.0.1 ::1 port = 4190 } process_min_avail = 0 service_count = 1 } service quota-warning { executable = script /virtual/shared/quota-warning.sh unix_listener quota-warning { user = vmail } user = dovecot } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } verbose_proctitle = yes protocol lmtp { mail_plugins = $mail_plugins quota sieve } protocol lda { mail_plugins = $mail_plugins quota } protocol imap { mail_plugins = $mail_plugins quota imap_quota } protocol pop3 { mail_plugins = $mail_plugins quota }

2 3

[Dovecot] minor director issues
by Cor Bosman 03 Sep '10

03 Sep '10

I noticed 2 minor things with the director. 1) if I start 2 directors, but in 1 of them I dont add the other as a director_servers, they both start spamming the logfiles really really fast. It seems there is no backoff mechanism in the protocol between directors. 2) user mail server ip expire time cor 194.109.26.171 2010-09-02 14:32:13 <unknown> 194.109.26.172 2010-09-02 14:33:13 Why does it say 'unknown'? That session is active, im manually logged in with telnet, issued a login and a select inbox. The first one is a normal mail client login. Regards, Cor

2 6

[Dovecot] safe_memset
by Len7hir 03 Sep '10

03 Sep '10

samples % lib function 4 0.0525 libdovecot.so.0.0.0 sha1_result_libmysqlcli(..) 7 0.0919 libdovecot.so.0.0.0 io_loop_handler_run 36 0.4729 libdovecot.so.0.0.0 imap_parser_reset 227 2.9817 libdovecot.so.0.0.0 pool_alloconly_unref 7339 96.4009 libdovecot.so.0.0.0 pool_alloconly_clear 7710 3.2463 libdovecot.so.0.0.0 safe_memset 7710 100.000 libdovecot.so.0.0.0 safe_memset [self] ------- 1 0.0148 libdovecot.so.0.0.0 i_stream_limit_read 2 0.0296 libdovecot.so.0.0.0 i_stream_header_filt(..) 6 0.0888 libdovecot.so.0.0.0 imap_parser_destroy 8 0.1184 libdovecot.so.0.0.0 settings_parser_deinit 230 3.4039 libdovecot.so.0.0.0 imap_parser_reset 6510 96.3445 libdovecot.so.0.0.0 pool_alloconly_unref 598 0.2518 libdovecot.so.0.0.0 pool_alloconly_clear 7339 89.8286 libdovecot.so.0.0.0 safe_memset 598 7.3195 libdovecot.so.0.0.0 pool_alloconly_clear [self] 232 2.8397 libc-2.3.6.so (no symbols) 1 0.0122 libdovecot.so.0.0.0 body ------- 4 0.0525 libdovecot.so.0.0.0 sha1_result_libmysqlclient_craps_all_over 7 0.0919 libdovecot.so.0.0.0 io_loop_handler_run 36 0.4729 libdovecot.so.0.0.0 imap_parser_reset 227 2.9817 libdovecot.so.0.0.0 pool_alloconly_unref 7339 96.4009 libdovecot.so.0.0.0 pool_alloconly_clear 7710 3.2463 libdovecot.so.0.0.0 safe_memset 7710 100.000 libdovecot.so.0.0.0 safe_memset [self] Mostly safe_memset is called from pool_alloconly_clear. I attach result from oprofile - functions (with call tree) that have more than 2% of all oprofile samples in libdovecot.so. p_strdup is on the list, but it is lower than before last optimisations. As You see there is no other optimised functions :) -- Len7hir

2 1

[Dovecot] apply sieve filter to old mails
by Giovanni Mancuso 03 Sep '10

03 Sep '10

Hi, i install dovecot 2.0.1 with managesieve support in my test machine. If i create a sieve filter and i send the mail to my user thi filter is applied. Is there a way to apply this filter to old mails too? Thanks

1 0

[Dovecot] Suggested location for single-dbox
by William Blunn 03 Sep '10

03 Sep '10

I've updated http://wiki2.dovecot.org/MailLocation regarding a typical mail_location entry for dbox. Previously it said: mail_location = dbox:~/dbox but of course "dbox" is now the old name for "sdbox", so the example should be updated to say "sdbox" and there might/ought also to be an example for "mdbox". In http://wiki2.dovecot.org/MailboxFormat/dbox the example mail_location for mdbox is given as "mdbox:~/mdbox", so I have followed that for "MailLocation". So I have changed it to say # single-dbox mail_location = sdbox:~/dbox or: # multi-dbox mail_location = mdbox:~/mdbox I didn't know whether to change the directory for sdbox to "~/sdbox" or to leave it as it is. For the time being I have left it at "~/dbox" --- following the example given should allow new installations of Dovecot 2 to be able to read any existing single-dbox data which used the historically-suggested "~/dbox" location, whilst at the same time avoiding using the old mailbox format name of "dbox". Bill

2 1

Re: [Dovecot] Some doubts about quota
by Andre 03 Sep '10

03 Sep '10

Il giorno 03/set/2010, alle ore 10.37, Andre ha scritto: > Hi to all, > we are using quota to collect statistics about usage of mailboxes (thanks to the one who implemented :noenforcing) and we are using “maildir” backend, but we are thinking to migrate to *dbox (as soon as “per-user \Seen flag” would be implemented) and we should need a faster way to collect statistics, so I’ve tried to use Postgresql as a backend. I’ve follwed literally instructions from wiki2 (and part from wiki), but quota is not automatically updated as soon as a messages is delivered to user or deleted from mailbox, we need to perform a “doveadm quota recalc -A” to have it updated. Is it the normal behavior of quota plugin or do I missed something? > > TIA > Andrea Mistrali > am(a)am.cx Solved! I’ve had disabled quota plugin in LDA & LMTP. Now it works, sorry to have bothered you all and wasted your bandwidth Andrea Mistrali am(a)am.cx

1 0

[Dovecot] Some doubts about quota
by Andre 03 Sep '10

03 Sep '10

Hi to all, we are using quota to collect statistics about usage of mailboxes (thanks to the one who implemented :noenforcing) and we are using “maildir” backend, but we are thinking to migrate to *dbox (as soon as “per-user \Seen flag” would be implemented) and we should need a faster way to collect statistics, so I’ve tried to use Postgresql as a backend. I’ve follwed literally instructions from wiki2 (and part from wiki), but quota is not automatically updated as soon as a messages is delivered to user or deleted from mailbox, we need to perform a “doveadm quota recalc -A” to have it updated. Is it the normal behavior of quota plugin or do I missed something? TIA Andrea Mistrali am(a)am.cx

1 0

[Dovecot] bogus fts percentage
by Mike Abbott 03 Sep '10

03 Sep '10

Sometimes dovecot-2.0 sends this untagged response to clients: * OK Indexed -2147483648% of the mailbox, ETA 0:00 I imagine there's a bug in there somewhere.

3 3

[Dovecot] LMTP plugin with MySQL query
by Charly 03 Sep '10

03 Sep '10

Hello, I want to create a plugin to dovecot 2.0.1, to call a on the deliver action. My plugin work even if I include other libs like mysql or wathever I tried to use the "sql-api.h" (lib-sql), but at runtime, I have : "undefined symbol: sql_init", "Fatal: Couldn't load required plugins" Is it possible to use lib-sql api or mysql libs in a plugin ? I've tried with lda or lmtp plugin with the same result... Any idea ? Charly.

2 2

[Dovecot] My "%%" variables in the namespace settings do not appear to be expanding.
by Kenneth Cope 02 Sep '10

02 Sep '10

Hello, I've been using the dovecot 1.2.x branch server software for a while now. With the advent of the 2.0.x branch going 'stable' I decided to attempt a migration and make use of some of the features that I've not needed before. One of these is the shared folder/namespace feature. No luck. I've hit a wall and can not determine the problem. At the moment it looks like a bug to me, but it may well be that I'm missing some related configuration, or file permission. I can not get the %% variable expansion in a namespace to work. What I end up with, on an IMAP connection is a directory named, for instance, '%h'. The same goes for any of the %% variables used at this point. My current set-up is 'not' the same as the current setup and I'm using virtual users that are not 'live' on the current system. I would really appreciate it if someone could cast an eye over my config and let me know if I've missed something obvious. Thanks. Kenneth Cope kenneth(a)CopeOnThe.net ---- I'm using a dovecot compiled with the following options: ./configure --prefix=/usr/local/dovecot-2.0.1 \ --enable-dependency-tracking INSTALL_DATA="install -c -p -m644" \ --docdir=/usr/local/dovecot-2.0.1/docs/ --disable-static \ --disable-rpath --with-nss --with-zlib --with-bzlib --with-libcap \ --with-ssl=openssl --with-ssldir=/usr/local/dovecot-2.0.1/etc/ssl \ --with-docs \ ---- The 'test' configuration is as follows: # > /usr/local/dovecot-2.0.1/bin/doveconf -n # 2.0.1: /usr/local/dovecot-2.0.1/etc/dovecot/dovecot.conf # OS: Linux 2.6.9-89.0.26.ELsmp i686 Red Hat Enterprise Linux ES release 4 (Nahant Update 8) auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login cram-md5 digest-md5 apop auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_ @& auth_username_format = %Lu auth_verbose = yes default_client_limit = 10000 default_internal_user = mail default_login_user = dovecot disable_plaintext_auth = no first_valid_gid = 12 first_valid_uid = 8 last_valid_gid = 12 last_valid_uid = 8 log_path = /usr/local/dovecot-2.0.1/dovecot.log login_log_format_elements = [%p:%e] %Us(%u) method=%m rip=%r:%b lip=%l:%a %c %k mail_debug = yes mail_location = maildir:%h/ mail_log_prefix = [%p] %Us(%u): mail_max_keyword_length = 30 mail_plugins = quota imap_quota zlib acl mailbox_idle_check_interval = 120 s namespace { inbox = yes location = prefix = separator = . type = private } namespace { hidden = yes inbox = no list = no location = prefix = INBOX separator = . type = private } namespace { list = children location = maildir:%%h:LAYOUT=maildir++:INDEX=~/shared.%Dn_%Dd prefix = shared/%n@%d. separator = . subscriptions = no type = shared } namespace { location = prefix = } passdb { args = scheme=CRYPT username_format=%u /usr/local/dovecot-2.0.1/auth/passwd.dovecot driver = passwd-file } plugin { acl = vfile:/usr/local/dovecot-2.0.1/etc/dovecot/global-acls:cache_secs=300 acl_shared_dict = file:/usr/local/dovecot-2.0.1/var/lib/dovecot/shared-mailboxes mail_log_events = all mail_log_fields = uid, box, msgid, from, subject, size, vsize, flags mail_log_group_events = yes quota = maildir:User quota quota_rule = ?:storage=400M quota_rule2 = Trash:storage=+10% zlib_save = gz zlib_save_level = 9 } service auth-worker { user = $default_internal_user } service auth { unix_listener auth-userdb { group = dovecot mode = 0664 user = mail } user = $default_internal_user } service imap-login { inet_listener imap { port = 9143 } inet_listener imaps { port = 9993 ssl = yes } process_min_avail = 10 service_count = 1 } service imap { process_limit = 1024 vsz_limit = 268435456 } service lmtp { unix_listener lmtp { mode = 0666 } } service pop3-login { inet_listener pop3 { port = 9110 } inet_listener pop3s { port = 9995 ssl = yes } } service pop3 { process_limit = 1024 } ssl_cert = </etc/ssl/mail.cert ssl_key = </etc/ssl/mail.cert userdb { args = username_format=%u /usr/local/dovecot-2.0.1/auth/passwd.dovecot driver = passwd-file } verbose_ssl = yes protocol imap { imap_client_workarounds = delay-newmail imap_id_log = * imap_idle_notify_interval = 120 s imap_logout_format = bytes=%i/%o imap_max_line_length = 65536 mail_max_userip_connections = 40 mail_plugins = $mail_plugins imap_quota zlib imap_zlib imap_acl } protocol pop3 { mail_max_userip_connections = 40 mail_plugins = $mail_plugins zlib pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_enable_last = no pop3_lock_session = no pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s bytes=%i/%o pop3_reuse_xuidl = yes pop3_save_uidl = yes pop3_uidl_format = %Mf } ---- The contents of .../var/run/dovecot # > ls -lA total 12 srw------- 1 root root 0 Aug 31 11:25 anvil srw------- 1 root root 0 Aug 31 11:25 anvil-auth-penalty srw------- 1 root root 0 Aug 31 11:25 auth-client srw------- 1 mail root 0 Aug 31 11:25 auth-login srw------- 1 root root 0 Aug 31 11:25 auth-master srw-rw-r-- 1 mail dovecot 0 Aug 31 11:25 auth-userdb srw------- 1 mail root 0 Aug 31 11:25 auth-worker srw------- 1 root root 0 Aug 31 11:25 config srw------- 1 root root 0 Aug 31 11:25 dict srw------- 1 root root 0 Aug 31 11:25 director-admin srw------- 1 root root 0 Aug 31 11:25 director-userdb srw-rw-rw- 1 root root 0 Aug 31 11:25 dns-client srw------- 1 root root 0 Aug 31 11:25 doveadm-server lrwxrwxrwx 1 root root 49 Aug 31 11:25 dovecot.conf -> /usr/local/dovecot-2.0.1/etc/dovecot/dovecot.conf drwxr-xr-x 2 root root 4096 Aug 31 11:25 empty srw-rw-rw- 1 root root 0 Aug 31 11:25 lmtp drwxr-x--- 2 root dovecot 4096 Aug 31 11:25 login -rw------- 1 root root 6 Aug 31 11:25 master.pid

3 10

[Dovecot] Segfault on dovecot 2.0.1 w/ACLs
by Michael M. Slusarz 02 Sep '10

02 Sep '10

* PREAUTH [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS ACL RIGHTS=texk] Logged in as slusarz 5 LIST (SUBSCRIBED) "" (*) RETURN (SUBSCRIBED) * LIST (\Subscribed) "." "INBOX" [...] * LIST (\Subscribed) "." "Mileage Plus" Program received signal SIGSEGV, Segmentation fault. 0x00007ffff6d0cd61 in ?? () from /usr/lib/dovecot/modules/lib01_acl_plugin.so (gdb) bt full #0 0x00007ffff6d0cd61 in ?? () from /usr/lib/dovecot/modules/lib01_acl_plugin.so No symbol table info available. #1 0x00007ffff7b40eea in mailbox_list_iter_next () from /usr/lib/dovecot/libdovecot-storage.so.0 No symbol table info available. #2 0x000000000040b209 in ?? () No symbol table info available. #3 0x000000000040c030 in cmd_list_full () No symbol table info available. #4 0x000000000040f9dd in ?? () No symbol table info available. #5 0x000000000040fab2 in ?? () No symbol table info available. #6 0x000000000040fcfd in client_handle_input () No symbol table info available. #7 0x000000000041059f in client_input () No symbol table info available. #8 0x00007ffff78d8e85 in io_loop_handler_run () from /usr/lib/dovecot/libdovecot.so.0 No symbol table info available. #9 0x00007ffff78d80f8 in io_loop_run () from /usr/lib/dovecot/libdovecot.so.0 No symbol table info available. #10 0x00007ffff78c76f3 in master_service_run () from /usr/lib/dovecot/libdovecot.so.0 No symbol table info available. #11 0x0000000000418791 in main () No symbol table info available. # 2.0.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.35-ARCH x86_64 plugin { acl = vfile quota = maildir:User quota quota_rule = *:storage=10485769 } Can verify that disabling acl makes the segfault go away. michael

2 3

[Dovecot] [pigeonhole] Libraries not linked correctly
by pyther 02 Sep '10

02 Sep '10

Hello All I am trying to compile and use pigeonhole and I am experiencing the same exact problem that is stated here: http://dovecot.org/pipermail/dovecot/2010-August/051859.htm [root@mongo dovecot-2.0-pigeonhole-build]# ldd /usr/lib/dovecot/managesieve-login linux-gate.so.1 => (0xb777e000) libdovecot-login.so.0 => not found libdovecot.so.0 => not found libc.so.6 => /lib/libc.so.6 (0xb7622000) /lib/ld-linux.so.2 (0xb777f000) lt does not seem as if -Wl,-rpath -Wl,/usr/local/lib/dovecot is being appended to gcc -std=gnu99 -march=i686 -mtune=generic -O2 -pipe -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -o managesieve-login client.o client-authenticate.o managesieve-login-settings.o managesieve-proxy.o ../../src/lib-managesieve/libmanagesieve.a -ldovecot-login -L/usr/lib/dovecot -ldovecot -lrt ^^See: http://dovecot.org/pipermail/dovecot/2010-August/051907.html However, my lack of programming knowledge and skills prohibit me from trying to fix this myself. I am hoping some kind soul would be nice enough to fix it. Thank you!

2 1

[Dovecot] Dovecot - some more optimisations
by Len7hir 02 Sep '10

02 Sep '10

I did some more optimisation. Most performance hit in Dovecot do "for loop" in string operations. In one case (in message-parser.c) "for loop" has another "for" inside with the same variable used as iterator. This case is very hard to optimise by compiler. I do changes only in top functions listed in oprofile. Maybe I do more in future. Code was analysed and tested but it's hard to generate all cases. It's working well in production server (I'm monitoring). In istream-crlf.c I've changed one thing. When destination buffer is full after '\r' addition (to dest), It didn't skip '\n' in source buffer. I think this was buggy in earlier code, and '\n' was skipped (this piece of code is used very rare). Please check this out. This can help in huge e-mail systems :P And another problem. Why You use safe_memset instead of memset? Now this function have the largest impact in Dovecot performance. Another on list is t_push. Regards, Len7hir

2 5

[Dovecot] Passdb filter question - LDAP.
by Lauro Costa G. Borges 01 Sep '10

01 Sep '10

dovecot 1:1.2.9-1ubuntu6.1 ---- I don't know if I can solve this problem with Dovecot, or if it's an LDAP matter. I'm authenticating users with saslauthd/LDAP, and using Dovecot LDA. ---- dovecot.conf passdb ldap { args = /etc/dovecot/dovecot-ldap-passdb.conf } userdb prefetch { } # The userdb below is used only by deliver. userdb ldap { args = /etc/dovecot/dovecot-ldap-userdb.conf } ----- ----- dovecot-ldap-passdb.conf search base is dc=example,dc=org pass_filter = (&(objectclass=brPerson)(objectclass=inetOrgPerson)(mail=%u)) pass_attrs = userPassword=password,%u=user ----- ----- dovecot-ldap-userdb.conf search base is ou=%d,ou=mail,ou=services,dc=example,dc=org user_filter = (&(objectclass=nisMailAlias)(cn=%n)) user_attrs = rfc822MailMember=user,EmailQuota=quota_rule=*:storage=%$M ----- Here is how the LDAP tree is: ou=mail,ou=services,dc=example,dc=org ou=subdomain1.example.org,ou=mail,ou=services,dc=example,dc=org example entry under "ou=subdomain1.example.org" --- dn: cn=userfoo,ou=subdomain1,ou=mail,ou=services,dc=example,dc=org cn: userfoo edupersonprincipalname: WEMHVDEA-FUAOBAAA(a)example.org (some sort of unique identifier) emailquota: 512 objectclass: eduPerson objectclass: nisMailAlias rfc822mailmember: userfoo(a)subdomain1.example.org --- ou=people,dc=example,dc=org dn: uid=29859085900(a)example.org,ou=people,dc=example,dc=org uid: 29859085900(a)example.org eduPersonPrincipalName: WEMHVDEA-FUAOBAAA(a)example.org userPassword: {MD5}6ZoYxCjLONXyYIU2eJIuAw== objectClass: person objectClass: inetOrgPerson objectClass: eduPerson mail: 29859085900(a)example.org mail: userf(a)director.example.org mail: userfoo(a)dptoxyz.example.org mail: userfoo(a)subdomain1.example.org When delivering email, it must search under "services", for the proper "rfc822mailmember", which is the mailbox. When authenticating, there's where my problem is, I can't have ALL user e-mails under "ou=people", maybe just 1, so I need to search under "ou=services", there I have all user email addresses, and by using "edupersonPrincipalName", I want to point to the right location under "ou=people", where I have the user password. edupersonPrincipalName is the attribute present under "ou=services" and "ou=people" that links the entries. I tried to do it by changing passdb filter file, like this: pass_filter = (&(objectclass=eduPerson)(mail=%u)) pass_attrs = userPassword=userdb_password,eduPersonPrincipalName=userdb_user It works, but changes the username to the value of "edupersonprincipalname", and this changes the mailbox name. Dovecot accesses the wrong mailbox then (something like 29859085900(a)example.org) * My question is: is it possible to change the passdb filter, so it searches for somemail(a)sub1.example.org (under ou=services), then it gets the value of "edupersonprincipalname" (the unique identifier, present under "services" and "people"), and with that value, it looks under "people" the person with that identifier and validates the password. It would be a filter inside a filter, sort of. thanks, and sorry if this is a little offtopic. ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

2 3

[Dovecot] Filtering virtual mailbox using other virtual mailbox?
by Giovanni Giorgi 01 Sep '10

01 Sep '10

Hi All, my name is Giovanni and I am new to dovecot. I have installed version 2.0 the past week and I find it very powerful. I have started to play with the virtual mailbox plugin. I was unable to do a virtual mailbox filtering out the contents of other mailbox, for instance I have a virtual/spam mailbox which filter out all the spam thanks to spamassassin. This mailbox is virtual, its description is INBOX -Trash -Trash/* -Junk subject SPAM I'd like to do a simple virtual/ham mbox using this dovecot-virtual INBOX -virtual/spam to: jj(a)gioorgi.com but it seems not working. it does not filter the spam. It is possible to do such thing, or I am trying to do something not possible at all? Thank you (\__/) (='.'=) (")_(") Giovanni Giorgi jj(a)gioorgi.com

2 1

[Dovecot] Shared mail folders
by Ian macdonald 01 Sep '10

01 Sep '10

Hi All, I am trying to configure shared mail folders and have made some progress, however I am just stuck lack of experience I think. I have ubuntu 10.04 postfix and dovecot (working well) using dovecot deliver as LDA thunderbird reports that folders are shared flat file database has the shares My problem is I am missing something on the userdb I wish to use auth passwd as it is a small system of 20 system users I have the following from dovecot -n auth default: passdb: driver: pam userdb: driver: passwd I get the following IMAP(peter): userdb lookup: connect(/var/run/dovecot/auth-master) failed: No such file or directory dovecot: IMAP(peter): Namespace 'shared/': Could not lookup home for user ian I am lost and would be grateful for any help all the best Ian

2 1

[Dovecot] Virtual plugin speedup?
by Giovanni Giorgi 01 Sep '10

01 Sep '10

Hi, I am using the virtual plugin on divecot2. It seems a bit slow when accessing from my iPhone. How can I speed it up? The full text search plugin can help? Inviato da iPhone

2 1

[Dovecot] Help with Public Folder Configuration
by Joy 01 Sep '10

01 Sep '10

Dear All, I am trying to use Public Folder feature of dovecot but having some confusion with the configuration part as well as understanding the same. Here is output of doveconf -n which i think required to help me - mail_location = maildir:~/Maildir namespace { inbox = yes location = prefix = separator = . type = private } namespace { list = children location = maildir:/var/mail/public prefix = Public. separator = . subscriptions = no type = public } plugin { acl = vfile:/usr/local/dovecot/dovecot-acl/acl } after making this configuration i also created subfolder inside /var/mail/public which looks like following:- mail1:~# less /var/mail/public/ dovecot-acl-list .Public/ mail1:~# less /var/mail/public/.Public/Maildir/ cur/ new/ tmp/ I have changed default permission to [ chown -R vmail:vmail /var/mail ] on base public folder. Now I am able to see the public folder from webmail as well as from thunderbird but no display for .Public folder. I am expecting that .Public folder will be visible to all but no one will be allowed to delete and make any change in that folder, I am also using global ACL in my configuration. Please let me know what i am doing wrong because not getting any error in log, Correct me if i am understanding wrong. Thanks

2 1

[Dovecot] Broken SELECT ""/EXAMINE ""
by Michael M. Slusarz 01 Sep '10

01 Sep '10

a EXAMINE INBOX [...] a OK [READ-ONLY] Select completed. a EXAMINE "" a NO Empty mailbox name. [Should be in authenticated mode with no active mailbox. But...] a STATUS INBOX (UIDVALIDITY) * STATUS "INBOX" (UIDVALIDITY 1255685337) a OK [CLIENTBUG] Status on selected mailbox completed. a UNSELECT a OK Unselect completed. a STATUS INBOX (UIDVALIDITY) * STATUS "INBOX" (UIDVALIDITY 1255685337) a OK Status completed. Seeing a whole bunch of the CLIENTBUGs in the logs since IMP uses imapproxy and relies on the proxy to unselect the mailbox when a LOGOUT is caught. Thus, when we rebuild the connection on the next page connection, we assume that there is no active mailbox (we actually use LIST-STATUS to do folder polling, but we still use STATUS when we only need data on a single mailbox). imapproxy *should* really be using UNSELECT, but that looks like a different (imapproxy) bug. michael

5 5

[Dovecot] 2.0 migration weirdnesses: logs and hang
by Kyle Wheeler 01 Sep '10

01 Sep '10

Hello, I'm testing out an upgrade to dovecot 2.0 from 1.2.11, and I've stumbled across two weirdnesses that I need help with. First, I'm only getting one log message: master: Info: Dovecot v2.0.0 starting up After that, while I can connect, log in, read mail, etc., no further log messages are created. I have log_path set to /dev/stderr, and no syslog_facility setting, so... what could be going wrong? Second, when I create a new mailbox and copy messages across namespaces, dovecot hangs. The mailbox is created and the messages are copied successfully, but dovecot simply stops responding. I can't even logout! I'm attaching my config file, if it helps. ~Kyle -- The effect of liberty to individuals is, that they may do what they please; we ought to see what it will please them to do, before we risk congratulations. -- Edmund Burke

2 13

[Dovecot] Some questions about Shared mailboxes
by Mihajlin Evgenij 01 Sep '10

01 Sep '10

Hi, again. 1. Can somebody explain me about dovecot's shared mailboxes? 2. What does it do while searching shared mailboxes (debug_log cannot explain it)? What files is it looking for? 3. Need i set dovecot-shared file into directory which are shared (if i want to have separate flags for separate users)? 4. Some errors are hard to understand. For example, # pwd /var/spool/vmail/domains/badmltd.dn.ua # ls -l drwx------ 3 mailnull mail 4096 Авг 27 09:24 admin drwx------ 3 mailnull mail 4096 Июн 3 10:51 exim drwx------ 3 mailnull mail 4096 Мар 26 15:08 iif drwx-w---- 3 mailnull mail 4096 Мар 11 15:53 jack drwx------ 2 mailnull mail 4096 Авг 27 09:28 Maildir drwx-w---- 3 mailnull mail 4096 Авг 27 09:25 test Why did dovecot create Maildir folder??? And what mean this lines at the end of debug.log. Aug 27 09:28:42 imap(zakaz(a)badmltd.dn.ua): Debug: Namespace : type=shared, prefix=shared/%n/, sep=/, inbox=no, hidden=no, list=children, subscriptions=no Aug 27 09:28:42 imap(zakaz(a)badmltd.dn.ua): Debug: shared: root=/var/run/dovecot, index=, control=, inbox= Aug 27 09:28:42 imap(zakaz(a)badmltd.dn.ua): Debug: acl: initializing backend with data: vfile Aug 27 09:28:42 imap(zakaz(a)badmltd.dn.ua): Debug: acl: acl username = zakaz(a)badmltd.dn.ua Aug 27 09:28:42 imap(zakaz(a)badmltd.dn.ua): Debug: acl: owner = 0 Aug 27 09:28:42 imap(zakaz(a)badmltd.dn.ua): Debug: acl vfile: Global ACL directory: (null) Aug 27 09:28:46 imap(zakaz(a)badmltd.dn.ua): Debug: Namespace : Using permissions from /var/spool/vmail/domains/badmltd.dn.ua/zakaz/Maildir: mode=0700 gid=-1 Aug 27 09:28:46 imap(zakaz(a)badmltd.dn.ua): Debug: acl vfile: file /var/spool/vmail/domains/badmltd.dn.ua/zakaz/Maildir/dovecot-acl not found Aug 27 09:28:46 imap(zakaz(a)badmltd.dn.ua): Debug: maildir++: root=/var/spool/vmail/domains/badmltd.dn.ua//Maildir, index=/var/spool/vmail/domains/badmltd.dn.ua/zakaz/shared/(a)badmltd.dn.ua, control=, inbox=/var/spool/vmail/domains/badmltd.dn.ua//Maildir Aug 27 09:28:46 imap(zakaz(a)badmltd.dn.ua): Debug: Namespace shared//: Permission lookup failed from /var/spool/vmail/domains/badmltd.dn.ua//Maildir Aug 27 09:28:46 imap(zakaz(a)badmltd.dn.ua): Debug: Namespace shared//: Using permissions from /var/spool/vmail/domains/badmltd.dn.ua//Maildir: mode=0700 gid=-1 Thanks.

2 1

[Dovecot] Shared mailboxes with dovecot.
by Mihajlin Evgenij 01 Sep '10

01 Sep '10

Hi, first of all for forgive me for my english. I have several questions. 1. There are 2 user/passwd databases in my setup - ldap and mysql. when i login into one user with telnet 127.0.0.1 143 and share inbox to some users - records in dict-file apears? but if i delete some acls - records indict-file stays same. 2. I see in error.log such errors. can somebody explain what do dovecot list shared folder (what files is looking for, how it see variables %u and %%u, ...) Aug 26 15:44:19 imap(jack(a)badmltd.dn.ua): Error: Namespace 'shared//': mkdir(/var/run/dovecot/user-not-found/(a)badmltd.dn.ua) failed: Permission denied (euid=47(mailnull) egid=12(mail) missing +w perm: /var/run/dovecot, euid is not dir owner) Aug 26 15:44:53 imap(admin(a)badmltd.dn.ua): Error: Namespace 'shared/shared/': mkdir(/var/run/dovecot/user-not-found/shared(a)badmltd.dn.ua) failed: Permission denied (euid=47(mailnull) egid=12(mail) missing +w perm: /var/run/dovecot, euid is not dir owner) Aug 26 15:44:56 imap(test(a)badmltd.dn.ua): Error: Namespace 'shared/shared/': mkdir(/var/run/dovecot/user-not-found/shared(a)badmltd.dn.ua) failed: Permission denied (euid=47(mailnull) egid=12(mail) missing +w perm: /var/run/dovecot, euid is not dir owner) Aug 26 15:46:36 imap(jack(a)badmltd.dn.ua): Error: Namespace 'shared//': mkdir(/var/run/dovecot/user-not-found/(a)badmltd.dn.ua) failed: Permission denied (euid=47(mailnull) egid=12(mail) missing +w perm: /var/run/dovecot, euid is not dir owner) Aug 26 15:48:04 imap(jack(a)badmltd.dn.ua): Error: Namespace 'shared//': mkdir(/var/run/dovecot/user-not-found/(a)badmltd.dn.ua) failed: Permission denied (euid=47(mailnull) egid=12(mail) missing +w perm: /var/run/dovecot, euid is not dir owner) *********************debug.log******************* Aug 26 15:48:03 auth: Debug: master out: USER 1 jack(a)badmltd.dn.ua home=/var/spool/vmail/domains/badmltd.dn.ua/jack uid=47 gid=12 Aug 26 15:48:03 imap: Debug: Loading modules from directory: /usr/lib/dovecot Aug 26 15:48:03 imap: Debug: Module loaded: /usr/lib/dovecot/lib01_acl_plugin.so Aug 26 15:48:03 imap: Debug: Module loaded: /usr/lib/dovecot/lib02_imap_acl_plugin.so Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: Effective uid=47, gid=12, home=/var/spool/vmail/domains/badmltd.dn.ua/jack Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: Namespace : type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: maildir++: root=/var/spool/vmail/domains/badmltd.dn.ua/jack/Maildir, index=, control=, inbox=/var/spool/vmail/domains/badmltd.dn.ua/jack/Maildir Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl: initializing backend with data: vfile Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl: acl username = jack(a)badmltd.dn.ua Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl: owner = 1 Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl vfile: Global ACL directory: (null) Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: Namespace : type=shared, prefix=shared/%n/, sep=/, inbox=no, hidden=no, list=children, subscriptions=no Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: shared: root=/var/run/dovecot, index=, control=, inbox= Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl: initializing backend with data: vfile Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl: acl username = jack(a)badmltd.dn.ua Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl: owner = 0 Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl vfile: Global ACL directory: (null) Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl vfile: file /var/spool/vmail/domains/badmltd.dn.ua/jack/Maildir/.Trash/dovecot-acl not found Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl vfile: file /var/spool/vmail/domains/badmltd.dn.ua/jack/Maildir/.&BB4EQgQ,BEAEMAQyBDsENQQ9BD0ESwQ1-/dovecot- acl not found Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl vfile: file /var/spool/vmail/domains/badmltd.dn.ua/jack/Maildir/.Sent/dovecot-acl not found Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl vfile: file /var/spool/vmail/domains/badmltd.dn.ua/jack/Maildir/.&BCcENQRABD0EPgQyBDgEOgQ4-/dovecot- acl not found Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl vfile: file /var/spool/vmail/domains/badmltd.dn.ua/jack/Maildir/dovecot-acl not found Aug 26 15:48:03 auth: Debug: master in: USER 1 zakaz(a)badmltd.dn.ua service=lib-storage Aug 26 15:48:03 auth: Debug: sql(zakaz(a)badmltd.dn.ua): SELECT home, uid, gid FROM users WHERE id = 'zakaz' AND active = 'Y' Aug 26 15:48:03 auth: Debug: master out: USER 1 zakaz(a)badmltd.dn.ua home=/var/spool/vmail/domains/badmltd.dn.ua/zakaz uid=47 gid=12 Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: auth input: zakaz(a)badmltd.dn.ua home=/var/spool/vmail/domains/badmltd.dn.ua/zakaz uid=47 gid=12 Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: maildir++: root=/var/spool/vmail/domains/badmltd.dn.ua/zakaz/Maildir, index=/var/spool/vmail/domains/badmltd.dn.ua/jack/Maildir/shared/zakaz(a)badmltd.dn.ua, control=, inbox=/var/spool/vmail/domains/badmltd.dn.ua/zakaz/Maildir Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl: initializing backend with data: vfile Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl: acl username = jack(a)badmltd.dn.ua Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl: owner = 0 Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl vfile: Global ACL directory: (null) Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl vfile: reading file /var/spool/vmail/domains/badmltd.dn.ua/zakaz/Maildir/dovecot-acl Aug 26 15:48:03 auth: Debug: master in: USER 2 test(a)badmltd.dn.ua service=lib-storage Aug 26 15:48:03 auth: Debug: sql(test(a)badmltd.dn.ua): SELECT home, uid, gid FROM users WHERE id = 'test' AND active = 'Y' Aug 26 15:48:03 auth: Debug: ldap(test(a)badmltd.dn.ua): user search: base=dc=Donetsk, dc=Office, dc=badm, dc=com scope=subtree filter=(&(objectclass=user)(!(userAccountControl:1.2.840.113556.1.4.803:=2)) (mail=test(a)badmltd.dn.ua)) fields= Aug 26 15:48:03 auth: Debug: ldap(test(a)badmltd.dn.ua): result: objectClass(?unknown?)= cn(?unknown?)= givenName(?unknown?)= distinguishedName(?unknown?)= instanceType(?unknown?)= whenCreated(?unknown?)= whenChanged(?unknown?)= displayName(?unknown?)= uSNCreated(?unknown?)= uSNChanged(?unknown?)= name(?unknown?)= objectGUID(?unknown?)= userAccountControl(?unknown?)= primaryGroupID(?unknown?)= objectSid(?unknown?)= sAMAccountName(?unknown?)= sAMAccountType(?unknown?)= userPrincipalName(?unknown?)= objectCategory(?unknown?)= dSCorePropagationData(?unknown?)= lastLogonTimestamp(?unknown?)= mail(?unknown?)= Aug 26 15:48:03 auth: Debug: master out: USER 2 test(a)badmltd.dn.ua home=/var/spool/vmail/domains/badmltd.dn.ua/test mail=/var/spool/vmail/domains/badmltd.dn.ua/test/Maildir Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: auth input: test(a)badmltd.dn.ua home=/var/spool/vmail/domains/badmltd.dn.ua/test mail=/var/spool/vmail/domains/badmltd.dn.ua/test/Maildir Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: maildir++: root=/var/spool/vmail/domains/badmltd.dn.ua/test/Maildir, index=/var/spool/vmail/domains/badmltd.dn.ua/jack/Maildir/shared/test(a)badmltd.dn.ua, control=, inbox=/var/spool/vmail/domains/badmltd.dn.ua/test/Maildir Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl: initializing backend with data: vfile Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl: acl username = jack(a)badmltd.dn.ua Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl: owner = 0 Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl vfile: Global ACL directory: (null) Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: acl vfile: reading file /var/spool/vmail/domains/badmltd.dn.ua/test/Maildir/.kde/dovecot-acl Aug 26 15:48:03 auth: Debug: master in: USER 3 @badmltd.dn.ua service=lib-storage Aug 26 15:48:03 auth: Debug: sql((a)badmltd.dn.ua): SELECT home, uid, gid FROM users WHERE id = '' AND active = 'Y' Aug 26 15:48:03 auth: Debug: ldap((a)badmltd.dn.ua): user search: base=dc=Donetsk, dc=Office, dc=badm, dc=com scope=subtree filter=(&(objectclass=user)(!(userAccountControl:1.2.840.113556.1.4.803:=2)) (mail=(a)badmltd.dn.ua)) fields= Aug 26 15:48:03 auth: Debug: master out: NOTFOUND 3 Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: auth input: Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: maildir++: root=/var/run/dovecot/user-not-found/(a)badmltd.dn.ua, index=, control=, inbox=/var/run/dovecot/user-not-found/(a)badmltd.dn.ua Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: Namespace shared//: Permission lookup failed from /var/run/dovecot/user-not-found/(a)badmltd.dn.ua Aug 26 15:48:03 imap(jack(a)badmltd.dn.ua): Debug: Namespace shared//: Using permissions from /var/run/dovecot/user-not-found/(a)badmltd.dn.ua: mode=0700 gid=-1 Aug 26 15:48:04 imap(jack(a)badmltd.dn.ua): Debug: acl vfile: file /var/spool/vmail/domains/badmltd.dn.ua/jack/Maildir/.shared.test.kde/dovecot- acl not found Aug 26 15:48:04 imap(jack(a)badmltd.dn.ua): Debug: acl vfile: file /var/spool/vmail/domains/badmltd.dn.ua/jack/Maildir/.shared.zakaz.INBOX/dovecot- acl not found Aug 26 15:48:08 imap(jack(a)badmltd.dn.ua): Debug: Namespace : Using permissions from /var/spool/vmail/domains/badmltd.dn.ua/jack/Maildir: mode=0720 gid=-1 my setup: dovecot -n # 2.0.0: /etc/dovecot/dovecot.conf # OS: Linux 2.6.33.8-149.fc13.i686.PAE i686 Fedora release 13 (Goddard) ext4 auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login auth_verbose = yes auth_verbose_passwords = plain debug_log_path = /var/log/dovecot/debug.log disable_plaintext_auth = no first_valid_gid = 12 first_valid_uid = 47 info_log_path = /var/log/dovecot/info.log log_path = /var/log/dovecot/dovecot.log mail_access_groups = mail mail_debug = yes mail_gid = 12 mail_location = maildir:/var/spool/vmail/domains/%d/%n/Maildir mail_plugins = acl mail_uid = 47 mbox_write_locks = fcntl namespace { inbox = yes location = prefix = separator = / type = private } namespace { list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u prefix = shared/%%n/ separator = / subscriptions = no type = shared } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_shared_dict = file:/tmp/shared-mailboxes } postmaster_address = postmaster(a)badmltd.dn.ua protocols = imap pop3 service auth-worker { user = $default_internal_user } service auth { unix_listener auth-userdb { mode = 0666 user = mailnull } } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes protocol lda { debug_log_path = /var/log/dovecot/delivery-debug.log info_log_path = /var/log/dovecot/delivery-info.log log_path = /var/log/dovecot/delivery.log } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep mail_plugins = $mail_plugins imap_acl } # cat /tmp/shared-mailboxes shared/shared-boxes/user/admin@badmltd.dn.ua/test@badmltd.dn.ua 1 shared/shared-boxes/user/admin@badmltd.dn.ua/zakaz@badmltd.dn.ua 1 shared/shared-boxes/user/jack@badmltd.dn.ua/zakaz@badmltd.dn.ua 1 shared/shared-boxes/user/test@badmltd.dn.ua/zakaz@badmltd.dn.ua 1 shared/shared-boxes/user/jack@badmltd.dn.ua/test@badmltd.dn.ua 1 # cat /etc/dovecot/dovecot-sql.conf.ext driver = mysql connect = host=localhost dbname=****** user=**** password=***** default_pass_scheme=plain password_query = SELECT passwd as password FROM users WHERE id = '%n' AND active = 'Y' user_query = SELECT home, uid, gid FROM users WHERE id = '%n' AND active = 'Y' #password_query = SELECT crypt as password FROM users WHERE id = '%n' AND domain = '%d' AND active = 'Y' #user_query = SELECT home, uid, gid FROM users WHERE id = '%n' AND domain = '%d' AND active = 'Y' # cat /etc/dovecot/dovecot-ldap.conf.ext hosts = 10.1.11.3:3268 172.27.1.2:3268 dn = cn=****,cn=Users,dc=****,dc=Office,dc=****,dc=com dnpass = ***** auth_bind = yes ldap_version = 3 base = dc=*****k, dc=Office, dc=****, dc=com deref = searching scope = subtree user_attrs = =home=/var/spool/vmail/domains/%d/%n,=mail=/var/spool/vmail/domains/%d/%n/Maildir user_filter = (&(objectclass=user)(! (userAccountControl:1.2.840.113556.1.4.803:=2))(mail=%u)) pass_filter = (&(objectclass=user)(! (userAccountControl:1.2.840.113556.1.4.803:=2))(mail=%u)) # cat /var/spool/vmail/domains/badmltd.dn.ua/zakaz/Maildir/dovecot-acl user=admin(a)badmltd.dn.ua lrws user=jack(a)badmltd.dn.ua lrws user=test(a)badmltd.dn.ua lrws

2 3

[Dovecot] doveadm search/expunge with public folders
by Ralf Zimmermann 01 Sep '10

01 Sep '10

Hi all, can I expunge or search emails in public folders? The command 'doveadm expunge -u rzimmermann mailbox Public/folder all' does not delete emails in the folder 'Public/folder'. The command 'doveadm expunge -u rzimmermann mailbox Spam all' does delete emails in the folder 'Spam'. The user rzimmermann has all rights in 'Public/folder'. Greets Ralf Zimmermann -- .''`. Ralf Zimmermann : :' : SIEGNETZ.IT GmbH `. `' Schneppenkauten 1a `- 57076 Siegen Tel.: +49 271 68193 13 Fax.: +49 271 68193 29 Amtsgericht Siegen HRB4838 Geschaeftsfuehrer: Oliver Seitz Sitz der Gesellschaft ist Siegen

2 1

[Dovecot] (no subject)
by Alexander Cherniak 01 Sep '10

01 Sep '10

Hi, I'd like to use Global ACLs to limit user's access to individual folders (e.g. read only). The dovecot-acl file limiting my user "test": user=test lr works fine when I put it into the user's mailbox /home/vmail/test/Maildir/.Records but gets ignored in /etc/dovecot/acls/Records Bellow is my dovecot -n output: # 2.0.0: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.11.1.el5 i686 CentOS release 5.5 (Final) auth_master_user_separator = * auth_mechanisms = plain ntlm disable_plaintext_auth = no mail_location = maildir:~/Maildir mail_plugins = acl passdb { args = /etc/dovecot/users driver = passwd-file } plugin { acl = vfile:/etc/dovecot/acls } protocols = imap userdb { args = uid=vmail gid=vmail home=/home/vmail/%u allow_all_users=yes driver = static } protocol imap { mail_plugins = $mail_plugins imap_acl } Any help will be appreciated. Thanks, Alex

2 6

[Dovecot] configure forgets to add -lgcc_s under Solaris 10
by Stephan Schulz 01 Sep '10

01 Sep '10

Hi all! I built dovecot-1.2.14 on Solaris 10 with gcc as well as cc and had reproducible crashes of imap-login: Aug 31 19:00:05 dovecot: Info: Dovecot v1.2.14 starting up Aug 31 19:00:10 imap-login: Info: Login: user=<someuser>, method=PLAIN, rip=<remote_ip>, lip=<local_ip> Aug 31 19:00:10 IMAP(someuser): Error: ld.so.1: imap: fatal: libgcc_s.so.1: open failed: No such file or directory Aug 31 19:00:10 dovecot: Error: child 26222 (imap) killed with signal 9 To solution was to set the environment variable LIBS to "-lgcc_s" before running configure. I think this is a bug as this library should be added automatically by configure to the Makefile when considered necessary. The same problem applies to Dovecot-2.0.1 also, which gave the same error message. regards, Stephan P.S. I found a similar message of this issue for version 1.0.rc27 but the suggestions didn't help (i.e. /usr/sfw/lib is already in the RPATH).

3 7

[Dovecot] Lazy expunge plugin - delete folder result error.
by Kui Zhang 01 Sep '10

01 Sep '10

Hello Is it a bug in lazy expunge plugin or am I missing something? Dovecot v2.0.1 (c5111fb65b0b) home = /mail/%Ld/%Ln mail_location = mdbox:/mail/%Ld/%Ln/mdbox sources.list - debian (squeeze) .. deb http://xi.rename-it.nl/debian testing-auto/dovecot-2.0 main Config changes - - - plugin { lazy_expunge = .EXPUNGED/ } namespace { type = private separator = / prefix = inbox = yes list = yes } # lazy_expunge namespace { type = private separator = / prefix = .EXPUNGED/ #location = mdbox:~/mdbox:MAILBOXDIR=expunged location = mdbox:~/expunged:MAILBOXDIR=expunged list = children subscriptions = no - - - When: location = mdbox:~/mdbox:MAILBOXDIR=expunged expunged folder gets created inside mail_location delete/expunge email works delete/expunge folder works When: location = mdbox:~/expunged:MAILBOXDIR=expunged expunged folder gets created inside mail home delete/expunge email works delete/expunge folder DOES NOT WORK. To reproduce the problem in outlook 2003: Delete a messages in the Inbox. Then edit/purge deleted messages. Create a new folder, then delete the new folder... error prompt Server Responded: "CANNOT] Can't rename mailboxes across specified storages." Folder does not get unsubscribe/move no core dump. when try to delete the same folder again. Server Responded: "NONEXISTENT] Mailbox was deleted under us" Thanks

3 5

[Dovecot] Static passdb support?
by Brad Davidson 01 Sep '10

01 Sep '10

Timo, Do you have any plans to add a static passdb? I'm essentially emulating one with sqlite on my director - have it connect to /dev/null and return three static fields for all queries. Works fine, but it would seem a little cleaner to me if I could just do: passdb { driver = static args = password='' nopasswd='Y' proxy='Y' } -Brad

2 3

[Dovecot] doveadm expunge -A mailbox Trash savedbefore 30d iterate_query LDAP
by Tomislav Mihalicek 01 Sep '10

01 Sep '10

hi everyone after doing this in shell #/usr/local/dovecot-2.0.1/bin/doveadm expunge -u tmihal mailbox INBOX savedbefore 1d everything is working as it should but ... #/usr/local/dovecot-2.0.1/bin/doveadm expunge -A mailbox INBOX savedbefore 1d doveadm(root): Error: userdb list: Disconnected unexpectedly doveadm: Error: Failed to iterate through some users #cat /etc/dovecot2/dovecot-ldap.conf tls = no hosts = blah ldap_version = 3 auth_bind = no dn = blah.blah dnpass = blah scope = onelevel deref = never pass_attrs = userPassword=password default_pass_scheme = CRYPT user_attrs = mail=%u,homeDirectory=home,mailQuotaSize=quota_rule=*:bytes=%$,mailQuotaCount=quota_rule2=*:messages=%$ base = ou=accounts,dc=xnet,dc=hr user_filter = (&(objectClass=qmailUser)(accountStatus=enabled)(enabledService=mail)(enabledService=%Ls%Lc)(|(mail=%u)(mailAlternateAddress=%u))) pass_filter = (&(objectClass=qmailUser)(accountStatus=enabled)(enabledService=mail)(enabledService=%Ls%Lc)(|(mail=%u)(mailAlternateAddress=%u))) # Attributes and filter to get a list of all users iterate_attrs = mail=%u iterate_filter = (objectClass=qmailUser) Aug 31 10:03:35 cartman2 dovecot: auth: Debug: master in: LIST 1 Aug 31 10:03:35 cartman2 dovecot: auth: Fatal: net_connect_unix(auth-worker) failed: Permission denied Aug 31 10:03:35 cartman2 dovecot: auth: Debug: Loading modules from directory: /usr/local/dovecot-2.0.1/lib/dovecot/auth Aug 31 10:03:35 cartman2 dovecot: auth: Debug: passwd-file /etc/dovecot/passwd.masterusers: Read 1 users Aug 31 10:03:35 cartman2 dovecot: auth: Debug: auth client connected (pid=17731) Aug 31 10:03:35 cartman2 dovecot: auth: Debug: auth client connected (pid=17729) Aug 31 10:03:35 cartman2 dovecot: auth: Debug: auth client connected (pid=17734) Aug 31 10:03:35 cartman2 dovecot: auth: Debug: auth client connected (pid=17735) Aug 31 10:03:35 cartman2 dovecot: auth: Debug: auth client connected (pid=17737) Aug 31 10:03:35 cartman2 dovecot: auth: Debug: auth client connected (pid=17739) Aug 31 10:03:35 cartman2 dovecot: auth: Debug: auth client connected (pid=17742) Aug 31 10:03:35 cartman2 dovecot: auth: Debug: auth client connected (pid=17741) Aug 31 10:03:35 cartman2 dovecot: auth: Debug: auth client connected (pid=17740) Aug 31 10:03:35 cartman2 dovecot: auth: Debug: auth client connected (pid=17730) Aug 31 10:03:35 cartman2 dovecot: auth: Debug: auth client connected (pid=17738) Aug 31 10:03:35 cartman2 dovecot: auth: Debug: auth client connected (pid=17733) Aug 31 10:03:35 cartman2 dovecot: auth: Debug: auth client connected (pid=17743) Aug 31 10:03:35 cartman2 dovecot: auth: Debug: auth client connected (pid=17728) Aug 31 10:03:35 cartman2 dovecot: auth: Debug: auth client connected (pid=17736) Aug 31 10:03:35 cartman2 dovecot: auth: Debug: auth client connected (pid=17732) any clues? -- View this message in context: http://old.nabble.com/doveadm-expunge--A-mailbox-Trash-savedbefore-30d-iter… Sent from the Dovecot mailing list archive at Nabble.com.

2 3

[Dovecot] doveadm quota get -u someone@ourdomains.com
by Jerrale G 01 Sep '10

01 Sep '10

With the expire running from mysql, on 2.0.1, we get no errors with: " doveadm expunge -A mailbox Trash savedbefore 7d" we have the mail_plugins defined differently for each protocol ({imap=quota,expire,imap_quota} {pop3=quota,expire} {lda=quota,expire,sieve}). When trying "doveadm quota get -u someone(a)ourdomains.com" the output is: "doveadm(root): Fatal: Unknown command 'quota', but plugin quota exists. Try to set mail_plugins=quota" When adding an additional, global mail_plugins=quota, we get: "Segmentation fault" Is there a specific, proper way beyond the way I read of 1.2.x for defining the plugins. Please let me know how and what plugins I should define Jerrale G -- Jerrale G. SC Senior Admin

2 3

Re: [Dovecot] Dovecot creating aditional folders?
by Pablo 01 Sep '10

01 Sep '10

Thank you again. Yes, you're on the way :-) Problem was that in /etc/dovecot/dovecot.conf was: mail_location = maildir:/home/vmail/%u/ instead of my new line: mail_location = maildir:/home/vmail/%d/%u/ I think it's all right now. Well...not all right, I see no mails with a client (it's on the mailserver filesystem) but it's another history ;-) Thanks in advance! 2010/9/1 <spamvoll(a)googlemail.com>: > mail_location: maildir:/home/vmail/%u/ > > check if there is the correct home in /etc/dovecot/dovecot-sql.conf > > maybe that is different, but not sure > > 2010/9/1 Pablo <boinker(a)gmail.com>: >> Thank you for your response. >> >> Yes, I know that I'm using maildir, but when we create an account, >> file sistem look likes: >> >> /home/vmail/domain.com/user1/new >> /home/vmail/domain.com/user1/cur >> /home/vmail/domain.com/user1/tmp >> >> My problem is that dovecot is creating additional folders: >> >> /home/vmail/user1/new >> /home/vmail/domain.com/user/cur >> /home/vmail/domain.com/user/tmp >> >> Mail are received in first directories, second ones are created but not used. >> >> What's the problem? >> >> Thanks again! >> >> 2010/9/1 <spamvoll(a)googlemail.com>: >>> its because u using maildir to store your mails. >>> >>> THE MAILDIR STRUCTURE >>> A directory in maildir format has three subdirectories, all >>> on the same filesystem: tmp, new, and cur. >>> >>> 2010/9/1 Pablo <boinker(a)gmail.com>: >>>> Hi guys. >>>> >>>> My conf: >>>> >>>> # 1.2.9: /etc/dovecot/dovecot.conf >>>> # OS: Linux 2.6.32-23-server x86_64 Ubuntu 10.04.1 LTS reiserfs >>>> log_timestamp: %Y-%m-%d %H:%M:%S >>>> protocols: imap imaps pop3 pop3s >>>> ssl_cert_file: /etc/ssl/mail/dovecot.crt >>>> ssl_key_file: /etc/ssl/mail/dovecot.key >>>> disable_plaintext_auth: no >>>> login_dir: /var/run/dovecot/login >>>> login_executable(default): /usr/lib/dovecot/imap-login >>>> login_executable(imap): /usr/lib/dovecot/imap-login >>>> login_executable(pop3): /usr/lib/dovecot/pop3-login >>>> mail_location: maildir:/home/vmail/%u/ >>>> mail_debug: yes >>>> mbox_write_locks: fcntl dotlock >>>> mail_executable(default): /usr/lib/dovecot/imap >>>> mail_executable(imap): /usr/lib/dovecot/imap >>>> mail_executable(pop3): /usr/lib/dovecot/pop3 >>>> mail_plugin_dir(default): /usr/lib/dovecot/modules/imap >>>> mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap >>>> mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 >>>> auth default: >>>> mechanisms: plain login >>>> verbose: yes >>>> debug: yes >>>> debug_passwords: yes >>>> passdb: >>>> driver: sql >>>> args: /etc/dovecot/dovecot-sql.conf >>>> userdb: >>>> driver: sql >>>> args: /etc/dovecot/dovecot-sql.conf >>>> socket: >>>> type: listen >>>> client: >>>> path: /var/spool/postfix/private/auth >>>> mode: 432 >>>> user: postfix >>>> group: postfix >>>> master: >>>> path: /var/run/dovecot/auth-master >>>> mode: 384 >>>> user: vmail >>>> group: vmail >>>> ------------------------------------- >>>> >>>> My problem is that dovecot is creating aditional folders: >>>> >>>> #ls -l /home/vmail >>>> >>>> drwx------ 6 vmail vmail 184 2010-09-01 01:31 escuelasuperiordecoaching.com >>>> drwx------ 8 vmail vmail 392 2010-09-01 10:58 >>>> pablo.rodriguez(a)escuelasuperiordecoaching.com >>>> >>>> # ls -l escuelasuperiordecoaching.com/ >>>> drwx------ 5 vmail vmail 120 2010-08-30 14:35 pablo.rodriguez >>>> >>>> I'm receiving mail in >>>> /home/vmail/escuelasuperiordecoaching.com/pablo.rodriguez/new without >>>> problem, but why is dovecot creating aditional folders? >>>> >>>> My log: >>>> >>>> Sep 1 10:58:30 socrates dovecot: auth(default): master in: >>>> REQUEST^I162^I4003^I1 >>>> Sep 1 10:58:30 socrates dovecot: auth-worker(default): >>>> sql(pablo.rodriguez(a)escuelasuperiordecoaching.com,127.0.0.1): SELECT >>>> maildir, 1001 AS uid, 1001 AS gid FROM mailbox WHERE username = >>>> 'pablo.rodriguez(a)escuelasuperiordecoaching.com' >>>> Sep 1 10:58:30 socrates dovecot: auth(default): master out: >>>> USER^I162^Ipablo.rodriguez@escuelasuperiordecoaching.com^Imaildir=escuelasuperiordecoaching.com/pablo.rodriguez/^Iuid=1001^Igid=1001 >>>> Sep 1 10:58:30 socrates dovecot: imap-login: Login: >>>> user=<pablo.rodriguez(a)escuelasuperiordecoaching.com>, method=PLAIN, >>>> rip=127.0.0.1, lip=127.0.0.1, secured >>>> Sep 1 10:58:30 socrates dovecot: >>>> IMAP(pablo.rodriguez(a)escuelasuperiordecoaching.com): Effective >>>> uid=1001, gid=1001, home=(none) >>>> Sep 1 10:58:30 socrates dovecot: >>>> IMAP(pablo.rodriguez(a)escuelasuperiordecoaching.com): maildir: >>>> data=/home/vmail/pablo.rodriguez(a)escuelasuperiordecoaching.com/ >>>> Sep 1 10:58:30 socrates dovecot: >>>> IMAP(pablo.rodriguez(a)escuelasuperiordecoaching.com): maildir++: >>>> root=/home/vmail/pablo.rodriguez(a)escuelasuperiordecoaching.com, >>>> index=, control=, >>>> inbox=/home/vmail/pablo.rodriguez(a)escuelasuperiordecoaching.com >>>> Sep 1 10:58:30 socrates dovecot: >>>> IMAP(pablo.rodriguez(a)escuelasuperiordecoaching.com): Namespace : Using >>>> permissions from >>>> /home/vmail/pablo.rodriguez(a)escuelasuperiordecoaching.com: mode=0700 >>>> gid=-1 >>>> Sep 1 10:58:30 socrates dovecot: >>>> IMAP(pablo.rodriguez(a)escuelasuperiordecoaching.com): Disconnected: >>>> Logged out bytes=117/1383 >>>> >>>> I can see that Dovecot is creating when...I login? >>>> >>>> What's the problem? I can't understand... >>>> >>>> Thanks in advance. >>>> >>> >> >

3 4

[Dovecot] Dovecot creating aditional folders?
by Pablo 01 Sep '10

01 Sep '10

Hi guys. My conf: # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-23-server x86_64 Ubuntu 10.04.1 LTS reiserfs log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/mail/dovecot.crt ssl_key_file: /etc/ssl/mail/dovecot.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_location: maildir:/home/vmail/%u/ mail_debug: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: mechanisms: plain login verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail ------------------------------------- My problem is that dovecot is creating aditional folders: #ls -l /home/vmail drwx------ 6 vmail vmail 184 2010-09-01 01:31 escuelasuperiordecoaching.com drwx------ 8 vmail vmail 392 2010-09-01 10:58 pablo.rodriguez(a)escuelasuperiordecoaching.com # ls -l escuelasuperiordecoaching.com/ drwx------ 5 vmail vmail 120 2010-08-30 14:35 pablo.rodriguez I'm receiving mail in /home/vmail/escuelasuperiordecoaching.com/pablo.rodriguez/new without problem, but why is dovecot creating aditional folders? My log: Sep 1 10:58:30 socrates dovecot: auth(default): master in: REQUEST^I162^I4003^I1 Sep 1 10:58:30 socrates dovecot: auth-worker(default): sql(pablo.rodriguez(a)escuelasuperiordecoaching.com,127.0.0.1): SELECT maildir, 1001 AS uid, 1001 AS gid FROM mailbox WHERE username = 'pablo.rodriguez(a)escuelasuperiordecoaching.com' Sep 1 10:58:30 socrates dovecot: auth(default): master out: USER^I162^Ipablo.rodriguez@escuelasuperiordecoaching.com^Imaildir=escuelasuperiordecoaching.com/pablo.rodriguez/^Iuid=1001^Igid=1001 Sep 1 10:58:30 socrates dovecot: imap-login: Login: user=<pablo.rodriguez(a)escuelasuperiordecoaching.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Sep 1 10:58:30 socrates dovecot: IMAP(pablo.rodriguez(a)escuelasuperiordecoaching.com): Effective uid=1001, gid=1001, home=(none) Sep 1 10:58:30 socrates dovecot: IMAP(pablo.rodriguez(a)escuelasuperiordecoaching.com): maildir: data=/home/vmail/pablo.rodriguez(a)escuelasuperiordecoaching.com/ Sep 1 10:58:30 socrates dovecot: IMAP(pablo.rodriguez(a)escuelasuperiordecoaching.com): maildir++: root=/home/vmail/pablo.rodriguez(a)escuelasuperiordecoaching.com, index=, control=, inbox=/home/vmail/pablo.rodriguez(a)escuelasuperiordecoaching.com Sep 1 10:58:30 socrates dovecot: IMAP(pablo.rodriguez(a)escuelasuperiordecoaching.com): Namespace : Using permissions from /home/vmail/pablo.rodriguez(a)escuelasuperiordecoaching.com: mode=0700 gid=-1 Sep 1 10:58:30 socrates dovecot: IMAP(pablo.rodriguez(a)escuelasuperiordecoaching.com): Disconnected: Logged out bytes=117/1383 I can see that Dovecot is creating when...I login? What's the problem? I can't understand... Thanks in advance.

2 1

[Dovecot] sieve + homedirectory
by spamvoll＠googlemail.com 01 Sep '10

01 Sep '10

hi.. system: dovecot 2.0.1 + pigenhole my global sieve script is used but my users sieve scrips not. the user scripts arent even compiled. so i think the problem is with the home path im using ldap as userdb (ive tryed staticdb but i need the uid from my ldap, path is /home/MAILBOXES/hpeter/mail) user_attrs = homeDirectory=home=/home/MAILBOXES/%$/,uid=mail=maildir:/home/MAILBOXES/%$/mail user_filter = (&(objectClass=gosaMailAccount)(|(mail=%u)(gosaMailAlternateAddress=%u)(uid=%u))) in sieve i use: sieve_dir = ~/sieve any ideas ? all mails are stored correctly Hans

1 1

Re: [Dovecot] Dovecot creating aditional folders?
by Pablo 01 Sep '10

01 Sep '10

Thank you for your response. Yes, I know that I'm using maildir, but when we create an account, file sistem look likes: /home/vmail/domain.com/user1/new /home/vmail/domain.com/user1/cur /home/vmail/domain.com/user1/tmp My problem is that dovecot is creating additional folders: /home/vmail/user1/new /home/vmail/domain.com/user/cur /home/vmail/domain.com/user/tmp Mail are received in first directories, second ones are created but not used. What's the problem? Thanks again! 2010/9/1 <spamvoll(a)googlemail.com>: > its because u using maildir to store your mails. > > THE MAILDIR STRUCTURE > A directory in maildir format has three subdirectories, all > on the same filesystem: tmp, new, and cur. > > 2010/9/1 Pablo <boinker(a)gmail.com>: >> Hi guys. >> >> My conf: >> >> # 1.2.9: /etc/dovecot/dovecot.conf >> # OS: Linux 2.6.32-23-server x86_64 Ubuntu 10.04.1 LTS reiserfs >> log_timestamp: %Y-%m-%d %H:%M:%S >> protocols: imap imaps pop3 pop3s >> ssl_cert_file: /etc/ssl/mail/dovecot.crt >> ssl_key_file: /etc/ssl/mail/dovecot.key >> disable_plaintext_auth: no >> login_dir: /var/run/dovecot/login >> login_executable(default): /usr/lib/dovecot/imap-login >> login_executable(imap): /usr/lib/dovecot/imap-login >> login_executable(pop3): /usr/lib/dovecot/pop3-login >> mail_location: maildir:/home/vmail/%u/ >> mail_debug: yes >> mbox_write_locks: fcntl dotlock >> mail_executable(default): /usr/lib/dovecot/imap >> mail_executable(imap): /usr/lib/dovecot/imap >> mail_executable(pop3): /usr/lib/dovecot/pop3 >> mail_plugin_dir(default): /usr/lib/dovecot/modules/imap >> mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap >> mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 >> auth default: >> mechanisms: plain login >> verbose: yes >> debug: yes >> debug_passwords: yes >> passdb: >> driver: sql >> args: /etc/dovecot/dovecot-sql.conf >> userdb: >> driver: sql >> args: /etc/dovecot/dovecot-sql.conf >> socket: >> type: listen >> client: >> path: /var/spool/postfix/private/auth >> mode: 432 >> user: postfix >> group: postfix >> master: >> path: /var/run/dovecot/auth-master >> mode: 384 >> user: vmail >> group: vmail >> ------------------------------------- >> >> My problem is that dovecot is creating aditional folders: >> >> #ls -l /home/vmail >> >> drwx------ 6 vmail vmail 184 2010-09-01 01:31 escuelasuperiordecoaching.com >> drwx------ 8 vmail vmail 392 2010-09-01 10:58 >> pablo.rodriguez(a)escuelasuperiordecoaching.com >> >> # ls -l escuelasuperiordecoaching.com/ >> drwx------ 5 vmail vmail 120 2010-08-30 14:35 pablo.rodriguez >> >> I'm receiving mail in >> /home/vmail/escuelasuperiordecoaching.com/pablo.rodriguez/new without >> problem, but why is dovecot creating aditional folders? >> >> My log: >> >> Sep 1 10:58:30 socrates dovecot: auth(default): master in: >> REQUEST^I162^I4003^I1 >> Sep 1 10:58:30 socrates dovecot: auth-worker(default): >> sql(pablo.rodriguez(a)escuelasuperiordecoaching.com,127.0.0.1): SELECT >> maildir, 1001 AS uid, 1001 AS gid FROM mailbox WHERE username = >> 'pablo.rodriguez(a)escuelasuperiordecoaching.com' >> Sep 1 10:58:30 socrates dovecot: auth(default): master out: >> USER^I162^Ipablo.rodriguez@escuelasuperiordecoaching.com^Imaildir=escuelasuperiordecoaching.com/pablo.rodriguez/^Iuid=1001^Igid=1001 >> Sep 1 10:58:30 socrates dovecot: imap-login: Login: >> user=<pablo.rodriguez(a)escuelasuperiordecoaching.com>, method=PLAIN, >> rip=127.0.0.1, lip=127.0.0.1, secured >> Sep 1 10:58:30 socrates dovecot: >> IMAP(pablo.rodriguez(a)escuelasuperiordecoaching.com): Effective >> uid=1001, gid=1001, home=(none) >> Sep 1 10:58:30 socrates dovecot: >> IMAP(pablo.rodriguez(a)escuelasuperiordecoaching.com): maildir: >> data=/home/vmail/pablo.rodriguez(a)escuelasuperiordecoaching.com/ >> Sep 1 10:58:30 socrates dovecot: >> IMAP(pablo.rodriguez(a)escuelasuperiordecoaching.com): maildir++: >> root=/home/vmail/pablo.rodriguez(a)escuelasuperiordecoaching.com, >> index=, control=, >> inbox=/home/vmail/pablo.rodriguez(a)escuelasuperiordecoaching.com >> Sep 1 10:58:30 socrates dovecot: >> IMAP(pablo.rodriguez(a)escuelasuperiordecoaching.com): Namespace : Using >> permissions from >> /home/vmail/pablo.rodriguez(a)escuelasuperiordecoaching.com: mode=0700 >> gid=-1 >> Sep 1 10:58:30 socrates dovecot: >> IMAP(pablo.rodriguez(a)escuelasuperiordecoaching.com): Disconnected: >> Logged out bytes=117/1383 >> >> I can see that Dovecot is creating when...I login? >> >> What's the problem? I can't understand... >> >> Thanks in advance. >> >

1 0

[Dovecot] vpopmail auth always return "unknown user"
by Toorop 01 Sep '10

01 Sep '10

Hi, I'm working on a setup of dovecot 2 + netqmail + vpopmail 5.5 but auth doesn't works :( dovecot -n # 2.0.1: /etc/dovecot/dovecot/dovecot.conf # OS: Linux 2.6.35.1-rscloud x86_64 Ubuntu 10.04.1 LTS auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login cram-md5 auth_verbose = yes auth_verbose_passwords = plain disable_plaintext_auth = no log_path = /var/log/dovecot/dovecot.log login_greeting = Dovecot ready. mail_debug = yes passdb { driver = vpopmail } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = vpopmail } verbose_ssl = yes LOG: -------------------------------------------------------------- Aug 27 14:11:55 auth: Debug: client in: AUTH 1 PLAIN service=imap secured lip=184.106.217.69 rip=178.32.33.247 lport=143 rport=33875 Aug 27 14:11:55 auth: Debug: client out: CONT 1 Aug 27 14:11:56 auth: Debug: client in: CONT 1 AHRvb3JvcEByZXNwdWJsaWNhLmZyAG11cnBoeTI1 Aug 27 14:11:56 auth: Debug: vpopmail(toorop(a)respublica.fr,178.32.33.247): lookup user=toorop domain=respublica.fr Aug 27 14:11:56 auth: Info: vpopmail(toorop(a)respublica.fr,178.32.33.247): unknown user Aug 27 14:11:58 auth: Debug: client out: FAIL 1 user=toorop(a)respublica.fr Aug 27 14:11:58 auth: Debug: client in: AUTH 2 PLAIN service=imap secured lip=184.106.217.69 rip=178.32.33.247 lport=143 rport=33875 resp=AHRvb3JvcEByZXNwdWJsaWNhLmZyAG11cnBoeTI1 Aug 27 14:12:02 auth: Debug: vpopmail(toorop(a)respublica.fr,178.32.33.247): lookup user=toorop domain=respublica.fr Aug 27 14:12:02 auth: Info: vpopmail(toorop(a)respublica.fr,178.32.33.247): unknown user Aug 27 14:12:04 auth: Debug: client out: FAIL 2 user=toorop(a)respublica.fr ----------------------------------------------------------------- ./vuserinfo toorop(a)respublica.fr name: toorop passwd: $1$sOC22F4C$8.ciZmdTZkNnFLFB8EsZm0 clear passwd: clearpass comment/gecos: toorop uid: 1 gid: 0 flags: 0 gecos: toorop limits: No user limits set. dir: /home/vpopmail/domains/respublica.fr/toorop quota: NOQUOTA usage: 0% (8487 byte(s) in 3 file(s)) Any idea ? Thanks. -- Toorop «Ils ne savaient pas que c'était impossible, alors ils l'ont fait.» Mark Twain

3 5

[Dovecot] Dovecot 1.x and 2.x on the same machine ?
by Frank Bonnet 01 Sep '10

01 Sep '10

Hello Would it be possible to run two instances of Dovecot in order to test V 2 on the SAME machine that runs V 1 One Dovecot 1.x instance on std TCP ports One Dovecot 2.x instance on custom TCP ports and custom directories Thanks

2 2

[Dovecot] Wiki page for the 2.x version of the antispam plugin
by interfaSys sàrl 31 Aug '10

31 Aug '10

Since I had to collect information from different places to get it right, I decided to paste what I had into a wiki page. http://wiki2.dovecot.org/Plugins/Antispam Cheers, Olivier

1 0

[Dovecot] Problems Converting Maildir to mdbox
by Christian Felsing 31 Aug '10

31 Aug '10

Hello, I would like to convert all users mail from maildir to mdbox. My Dovecot version is 2.0.1, converted from 1.2.13 but config was rewritten from scratch. http://wiki2.dovecot.org/Migration/MailFormat says following: maildir -> mdbox migration. Set mail_location=mdbox:~/mdbox and run doveadm convert -u username maildir:~/Maildir but doveadm does not know a command like "convert". Is there a _working_ way to convert maildir to mdbox ? How to do that with all Dovecot mail users (about 10000) ? Christian

4 10

[Dovecot] status of antispam plugin for DC 2.x ?
by interfaSys sàrl 31 Aug '10

31 Aug '10

Hello, I saw that there is now an antispam plugin repository for the V2.x version. It doesn't compile and it seems it cannot be configured like the old one. Any ETA? Cheers, Olivier

5 7

[Dovecot] Running auth as root
by Egbert Jan van den Bussche 31 Aug '10

31 Aug '10

Hi, I seem to be forced to run the auth proces as root because I want to use pam for local users. My gut feeling says that this is Not Good. Is there another way? For the virtual users 'vmail' is good enough because that user may access the MySQL database. This is on Ubuntu server 10.04.1 and Dovecot 1.2.9. TIA, Egbert Jan

2 4

[Dovecot] Size limit for a single mail in the IMAP store?
by Ralf Hildebrandt 31 Aug '10

31 Aug '10

Postfix has "message_size_limit = 26214400", but that doesn't keep my users from sending huge messages which canot be sent, but can be stored in the IMAP "Sent" folder. Is it possible to set a size limit for the size of a single mail? -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

2 2

[Dovecot] doveadm expunge -A mailbox Trash savedbefore 30d
by Jerrale G 31 Aug '10

31 Aug '10

In the shell: ,doveadm(root): Error: User listing returned failure,doveadm: Error: Failed to iterate through some users In the log: dovecot: auth: Error: sql: Iterate query failed: Table 'mail.users' doesn't exist (using built-in default iterate_query: SELECT username, domain FROM users) Why is dovecot trying to "select username, domain from users" when the "service auth" is setup to "select homedir, maildir, sieve_dir, from MAILBOXES.... the same with the password query except for selecting password from mail.mailboxes. The expire dictionary is EXACTLY like the example you posted in the wiki2. I can't remember whether I posted this thread before or not; I remember writing it two days ago but I'm not sure if I sent it as I can't find it in this "mailing lists" folder. Jerrale G. SC Senior Admin

3 5

[Dovecot] Is there a way to catch mailbox and message flag changes?
by John O'Brien 31 Aug '10

31 Aug '10

Guys, We have been trying to establish if there is a way to get some type of notification from Dovecot when a message is appended to a mailbox or when a message has its flags updated. These are the 2 use cases: A message is appended to the mailbox "/Watch", we want to trigger "processing" of the message immediately it arrives. A message in the "Inbox" has its status changed from Unseen to Seen, we want to trigger some code to indicate the message has been "processed". Regards, John

2 1

Re: [Dovecot] LDAP & static userdb
by spamvoll＠googlemail.com 31 Aug '10

31 Aug '10

ive added args = uid=vmail gid=vmail home=/home/MAILBOXES/%u/ mail=/home/MAILBOXES/%u/mail and it work. Im not really sure about the hole LDAP thing :) my conf: uris = ldaps://ldap.example.org:636 dn = cn=dovecot server,ou=people,ou=Server,dc=example,dc=org dnpass = hiddenpw auth_bind = yes ldap_version = 3 base = dc=example,dc=org scope = subtree user_attrs = homeDirectory=home,uid=mail=maildir:/home/%$/mail user_filter = (&(objectClass=gosaMailAccount)(|(mail=%u)(gosaMailAlternateAddress=%u)(uid=%u))) pass_attrs = uid=user,userPassword=password pass_filter = (&(objectClass=gosaMailAccount)(uid=%u)) (yea on 1.2 my home was /home/%uid but that suxx and i want to move it to /home/MAILBOXES/%uid) 1) I have a user that can read the PW so i dont need "auth_bind = yes", right? 2) user_* and pass_* i dont need them anymore cause its always: home=/home/MAILBOXES/%u/ mail=/home/MAILBOXES/%u/mail 2010/8/27 Mihajlin Evgenij <skyworker(a)ooobadm.dp.ua>: > В сообщении от 27 августа 2010 17:32:04 автор spamvoll(a)googlemail.com написал: > >> > log say: >> > dovecot: imap(hpeter): Error: user hpeter: Initialization failed: >> > mail_location not set and autodetection failed: Mail storage >> > autodetection failed with home=/home/MAILBOXES/hpeter/mail > > may be try to set into 10-mail.conf or in namespace private (if you have such) > mail_localtion = ~/Maildir > >

2 1

[Dovecot] MainConfig for dovecot 2.0
by Sascha Peters 31 Aug '10

31 Aug '10

Hey, for dovecot 1.2 there is a very good reference page for all options. http://wiki.dovecot.org/MainConfig is there a reference for dovecot 2.0 in the new wiki? If not, when will be this page online? Thanks a lot. -- Gruß Sascha

2 1

[Dovecot] NTLM authentication does not work
by Alexander Cherniak 31 Aug '10

31 Aug '10

Dear Experts, I configured Samba, Kerberos, etc., can login to my CentOS using ADS account, but missing something in my Dovecot config. Windbind seems to work: [root@aCentOs2 dovecot]# wbinfo -a wAlex%pass plaintext password authentication succeeded challenge/response password authentication succeeded Same is true for ntlm_auth helper: [root@aCentOs2 dovecot]# /usr/bin/ntlm_auth --username=wAlex --password=pass NT_STATUS_OK: Success (0x0) But I couldn't get into Dovecot (with or without auth_use_winbind option): . login wAlex pass . NO [ALERT] Unsupported authentication mechanism. Despite very verbose logging, there no clues there. Bellow's my dovecot -n output: # 2.0.0: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.11.1.el5 i686 CentOS release 5.5 (Final) auth_debug = yes auth_debug_passwords = yes auth_master_user_separator = * auth_mechanisms = ntlm auth_use_winbind = yes auth_verbose = yes auth_verbose_passwords = plain debug_log_path = /var/log/Dovecot/dovecot_debug.log disable_plaintext_auth = no info_log_path = /var/log/Dovecot/dovecot_info.log log_path = /var/log/Dovecot/dovecot.log mail_location = maildir:~/Maildir protocols = imap ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { args = uid=vmail gid=vmail home=/home/vmail/%u allow_all_users=yes driver = static } It might be irrelevant, but although the lines "auth_use_winbind = yes" and "auth_winbind_helper_path = /usr/bin/ntlm_auth" are close together in the config file, I cannot see the latter when run dovecot -n. I am quite new to Dovecot and will appreciate any help. Thanks, Alex.

2 2

[Dovecot] Possible erroneous "aborted login attempts"
by Jerrale G 31 Aug '10

31 Aug '10

Aug 29 22:51:27 server1 dovecot: imap-login: Aborted login (no auth attempts): rip=(obfuscated), lip=173.50.101.12, TLS Aug 29 22:51:27 server1 dovecot: imap-login: Login: user=........... before most every successful login, the same second of time, dovecot has the above message. This is not a huge problem but our firewall is looking for aborted login attempts, for imap/pop3 (relevant to dovecot) dos attempts and, if many people start having problems of their packets being dropped, we will have to stop looking for the statement or lower security slightly, more attempts over a period of time before filtering. However, thanks to your idle feature, there is less of these messages; so, I don't think we will have a problem. The only client that doesn't have a problem is our php webmail but we don't look in dovecot's log for failed attempts from here; as, it is from the same ip, to dovecot from php, constantly without reference to the user. This has been happening since 1.2.11 with us. We don't use any imap relay but was looking into imapproxy for cacheing speed and preventing advanced ddos attempts, those from users with access. Jerrale G. errale G. SC Senior Admin

2 1

[Dovecot] dovecot lda issue
by Joy 31 Aug '10

31 Aug '10

I am using dovecot lda and everything is working fine for me except the sieve rule which is built for rejecting mail from a specific sender. message is being rejected but from address is not correct in rejection mail which looks like the following :- <<>@mail.xyz.net> sieve rule :- require ["fileinto","envelope","reject","vacation","imap4flags","relational","comparator-i;ascii-numeric","regex","body","date"]; if address :contains "From" "xyz(a)gmail.com" { reject text: Please do not send mail to me piyush .... . ; } Please let me know where is the issue with sieve rule or with lda setting :- lda has been configured with the following parameter :- postmaster_address = postmaster(a)xyz.net

2 1

[Dovecot] dovecot - mac firewall problem
by Patrick Fay 31 Aug '10

31 Aug '10

> >>>> Hi, >>>> I am running dovecot 1.2.11 on mac osx 1.5.8. Everything works >>>> perfectly with the application-level firewall off, but enabling the >>>> application firewall prevents dovecot connections. I have tried >>>> explicitly authorizing dovecot in the firewall, but it does not work. I >>>> have searched everywhere I can think of to look, and haven't found a >>>> solution, but have seen a couple other reports of what seems to be the >>>> same problem. The firewall logs the activity with what looks like a >>>> corrupt process name: a typical appfirewall.log entry looks like: >>>> >>>> Aug 26 20:43:45 hostname Firewall[55]: Deny ^L connecting from >>>> XX.XX.XX.XX:37310 uid = 0 proto=6 >>>> Aug 26 20:43:53 hostname Firewall[55]: Deny ^H?^U???^Z connecting from >>>> XX.XX.XX.XX:37310 uid = 0 proto=6 >>>> Aug 26 20:44:09 hostname Firewall[55]: Deny ^L connecting from >>>> XX.XX.XX.XX:37310 uid = 0 proto=6 >>>> Aug 26 20:44:34 hostname Firewall[55]: Deny ^L connecting from >>>> XX.XX.XX.XX:37312 uid = 0 proto=6 >>>> Aug 26 20:44:45: --- last message repeated 6 times --- >>>> >>>> where "hostname" is my server name and the XX's are my client's IP >>>> address. For all of the other services I've used, the process name >>>> (e.g. dovecot) should appear after "Deny" when blocking traffic, instead >>>> of the funny characters. Any advice on how I could resolve this issue >>>> would be greatly appreciated. Thanks! >>> >>> >> >> I was hoping to use the application firewall because this machine gets used both as a server as well as a client machine for more general use. I haven't been able to find any specific documentation for it, but I have found that the firewall works fine with postfix and several file services I use (enabling/disabling works as expected, process names get logged as expected, etc). Thanks! >> >> Patrick > > So, you're running Dovecot and Postfix on a laptop? WTF? > > -- > Stan Hi, Sorry for the confusion--no laptop involved. Postfix, dovecot, etc, all running on intel-based desktop mac (a mac pro). Patrick

5 5

[Dovecot] mixing 1.2 and 2.0?
by Cor Bosman 31 Aug '10

31 Aug '10

Hi all, anyone know if it's safe to mix a 1.2 environment with 2.0 servers? Im planning on adding some 2.0 servers for test purposes, but now im wondering if thats going to mess up index files or other files for users selecting the test server and then switching back to our normal servers. Regards, Cor

2 1

Re: [Dovecot] dovecot - mac firewall problem
by Patrick Fay 31 Aug '10

31 Aug '10

Hi, Thanks everyone for your help and input. I think perhaps my attempt to be brief and focused in posing my question has led to some confusion about my needs and configuration. I do not have the luxury of being able to segregate the server (postfix and dovecot) from client (GUI, etc) on different machines. I am, as Charles' surmised, using this to aggregate disparate mail streams into a single location, and using dovecot to serve it. Since I must run client-ish applications on this machine, the application firewall is desirable. The anticipated load on this system from the server side is quite light, so the throughput overhead incurred by the application firewall is negligible. The problem appears to be that--for some reason--dovecot identifies itself incorrectly to the application firewall, resulting in the garbage shown in the logs and failure to permit this connection (the firewall is configured to explicitly permit connections for dovecot). I note that other daemons (e.g. postfix, sshd, etc) do not exhibit this defect; the firewall works as expected for every other service I've tried except dovecot. The logs for the firewall appear as: Aug 26 20:43:45 hostname Firewall[55]: Deny ^L connecting from XX.XX.XX.XX:37310 uid = 0 proto=6 Aug 26 20:43:53 hostname Firewall[55]: Deny ^H?^U???^Z connecting from XX.XX.XX.XX:37310 uid = 0 proto=6 Both of these are dovecot hits--but the name is different each time. Also the ?'s aren't really "?" marks; they're trans-ascii characters with high bits set that my mailer doesn't like very much. It really looks like a misdirected pointer or something somewhere, but I'm not familiar enough with the codebase to know where to start looking, or if in fact it is something else that is misconfigured. Any thoughts on how to resolve this? Patrick

3 2

[Dovecot] getdents() with 4KB buffer - seems slow (Maildir, large inbox)
by Marinos Yannikos 31 Aug '10

31 Aug '10

Hi, I have a very large inbox (~146K mails) in Maildir format and dovecot seems to spend a lot of time rescanning the directory, especially when the server is loaded. I'm not sure whether this is triggered by Thunderbird or done regularly, but it takes longer when the server is loaded, so sometimes it seems that it is scanning continuously. Since it takes around 2000 getdents64() syscalls to scan my inbox, I'm wondering whether the buffer size is a bit small with 4KB and might benefit from being configurable: ... getdents64(8, /* 73 entries */, 4096) = 4088 getdents64(8, /* 73 entries */, 4096) = 4088 getdents64(8, /* 73 entries */, 4096) = 4088 getdents64(8, /* 73 entries */, 4096) = 4088 getdents64(8, /* 73 entries */, 4096) = 4088 ... (strace output of an imap process belonging to me) The behaviour is identical on 1.0.15 and 1.2.13 (I just upgraded). Regards, Marinos PS. I know that the main reason for slowness is my large inbox and the server being loaded (disk I/O), but still, so many syscalls just to rescan the inbox seems wasteful. # dovecot -n # 1.2.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-6-xen-686 i686 Debian 4.0 log_timestamp: %Y-%m-%d %H:%M:%S ssl_listen: * ssl_cert_file: XXXXX (censored) ssl_key_file: XXXXX login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login login_process_size: 32 login_processes_count: 8 verbose_proctitle: yes mail_privileged_group: mail mail_location: maildir:~/Maildir mbox_write_locks: fcntl dotlock mail_process_size: 2048 imap_client_workarounds: outlook-idle auth default: passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix

2 1

[Dovecot] Mail error in log
by Ian macdonald 31 Aug '10

31 Aug '10

Hi All, I am getting the following in the mail error log deliver(julie): safe_mkstemp(/home/julie/.temp.geomail.10443.) failed: Permission denied This is correct julie does not have access to write to her home directory Julie is a system user who is chrooted so her home is owned by root, this is for when she logs in via sftp to retrieve files she can only access folders below her home. I am using Maildir and julie does have access to ~Maildir, is there any reason why deliver is attempting to use her user directory and not her Maildir? Cheers Ian

3 3

[Dovecot] istream_read like zlib, but without zlib
by Alex Baule 31 Aug '10

31 Aug '10

Hy Timo ! I Made some modification in stream_read in zlib. I remove all zlib part, because i don't need this, but i need to read a istream to change it. Well, i create a size_t called supersize, with is a substitute for stream->zs.avail_in. The trouble is, my debug file have a lot of "READ Plugin\n", and i think it's because my read becomes a loop, i think it's because i don't know to identify the EOF from the istream. you can help me to identify the EOF and set it ? Tks .!!! static ssize_t i_stream_emx_read(struct istream_private *stream) { struct emx_istream *emxstream = (struct emx_istream *)stream; const unsigned char *data; uoff_t high_offset; size_t size; int ret; fprintf(emxstream->debug,"READ Plugin\n"); fflush(emxstream->debug); high_offset = stream->istream.v_offset + (stream->pos - stream->skip); if (emxstream->eof_offset == high_offset) { i_assert(emxstream->high_pos == 0); stream->istream.eof = TRUE; return -1; } if (stream->pos < emxstream->high_pos) { /* we're here because we seeked back within the read buffer. */ ret = emxstream->high_pos - stream->pos; stream->pos = emxstream->high_pos; emxstream->high_pos = 0; return ret; } emxstream->high_pos = 0; if (stream->pos + CHUNK_SIZE > stream->buffer_size) { /* try to keep at least CHUNK_SIZE available */ if (!emxstream->marked && stream->skip > 0) { /* don't try to keep anything cached if we don't have a seek mark. */ i_stream_compress(stream); } if (stream->max_buffer_size == 0 || stream->buffer_size < stream->max_buffer_size) i_stream_grow_buffer(stream, CHUNK_SIZE); if (stream->pos == stream->buffer_size) { if (stream->skip > 0) { /* lose our buffer cache */ i_stream_compress(stream); } if (stream->pos == stream->buffer_size) return -2; /* buffer full */ } } if(emxstream->supersize == 0){ /* need to read more data. try to read a full CHUNK_SIZE */ i_stream_skip(stream->parent, emxstream->prev_size); if (i_stream_read_data(stream->parent, &data, &size, CHUNK_SIZE-1) == -1 && size == 0) { if (stream->parent->stream_errno != 0) { stream->istream.stream_errno = stream->parent->stream_errno; } else { i_assert(stream->parent->eof); stream->istream.stream_errno = EPIPE; } return -1; } emxstream->prev_size = size; if (size == 0) { /* no more input */ stream->istream.eof = TRUE; i_assert(!stream->istream.blocking); return 0; } fprintf(emxstream->debug,"READ =|%s|= Plugin\n",data); fflush(emxstream->debug); memcpy(stream->w_buffer + stream->pos, data,size); emxstream->supersize = size; } size = stream->buffer_size - stream->pos; stream->pos += size; if(stream->istream.eof == TRUE){ emxstream->eof_offset = stream->istream.v_offset + stream->pos; i_stream_skip(stream->parent, emxstream->prev_size - emxstream->supersize); emxstream->supersize = 0; emxstream->prev_size = 0; } if (size == 0) { /* read more input */ return i_stream_emx_read(stream); } return size; }

1 0

Re: [Dovecot] fetchmail wakeup
by Amon Ott 31 Aug '10

31 Aug '10

On Tuesday 31 August 2010 wrote Peter Dungel: > Does someone know, if in the new release of dovecot 2.x.x there is a > feature implemented, that wakes fetchmail or any other program on a client > request, or is the "fetchmail wakeup" plugin still the only way to do this > (at least I've not found any other, and that plugin never worked for me),.. You could replace the imap or pop3 helper program with a wrapper that first sends the fetchmail daemon a wakeup signal, waits a few secs and then calls the original. Amon Ott -- Dr. Amon Ott - m-privacy GmbH Am Köllnischen Park 1, 10179 Berlin Tel: +49 30 24342334 Fax: +49 30 24342336 Web: http://www.m-privacy.de Handelsregister: Amtsgericht Charlottenburg HRB 84946 Geschäftsführer: Dipl.-Kfm. Holger Maczkowsky, Roman Maczkowsky GnuPG-Key-ID: EA898571

1 0