- dovecot - dovecot.org

Bug: The "listescape" plugin does not work with the option "mail_shared_explicit_inbox = no". [with patch]
by Rudolf Körner 09 Feb '16

09 Feb '16

Hello, there seems to be a problem with the listescape plugin and shared INBOX: === Preconditions: - Dovecot 2.2.21 (or 2.2.13) - IMAP - Separator / - Namespace-prefixes "INBOX/" and "shared/%%u/" - Maildir(++) - option mail_plugins = acl listescape - option mail_shared_explicit_inbox = no - User "owner" shares the INBOX - ACLs set for another user "reader", so "reader" is able to access the shared INBOX of "owner" === Steps to reproduce by using IMAP commands at a telnet session: - a1 login reader password - a2 select shared/owner === Result: Selecting the shared INBOX fails with a response like: a2 NO Mailbox doesn't exist: shared/owner === Expected: The "select" command works. === Analysis: The function "mailbox_list_default_get_storage_name" (lib-storage/mailbox-list.c) does not work as expected when using the mail_plugin "listescape". It compares the mailbox name to the namespace prefix. Since the mailbox name is escaped a few lines before, the comparison yields "strings differ", which makes accessing the shared INBOX fail. For example: for a string vname (mailbox name) "shared/owner", it compares "shared.owner" (escaped string) to the list->ns->prefix which is "shared/owner". Asuming that the stored prefix should not be escaped, there should be a comparison of the unescaped name to the unescaped prefix (or the escaped name to the escaped prefix?). === Patch: Attached is a small patch which shows a possible solution. When applied, the problem is solved, i.e. the shared INBOX is accessible then. Important note: this patch is experimental, it works for the described special case but might not work with a different configuration or might even break things. Best Regards, Rudolf Körner

1 0

RFC: HTTP based storage API
by Nagy, Attila 09 Feb '16

09 Feb '16

Hi, Nearly every popular programming language has an LMTP/POP/IMAP implementation, most of them suck in many different ways. I don't know any server or library which provides a well-established, compatible protocol frontend with an open backend API, which could be used to easily make a custom storage backend for the LMTP/POP/IMAP frontend in any language, in any programming paradigm, irregardless of the frontend implementation. Dovecot is very close to this: it speaks IMAP to the backend, but you still have to make a nearly complete IMAP implementation, which is a PITA. Therefore I am curious about your opinion: what about an HTTP-based open backend (lib-storage) API to Dovecot? Some thoughts on this: 1. it should be a simple REST API 2. it should support efficient operations on both sides (client, server), for example listing a multi-million folder shouldn't be a single JSON response, but a JSON stream, which could be produced and parsed individually or in smaller batches efficiently 3. it should support capabilities, somewhat like the current imapc backend, so if the backend service suppports search, it should announce this capability and dovecot could offload these requests to it, but if it doesn't, dovecot could build its indices. 4. only the needed amount of POP/IMAP legacy should appear in the protocol 5. the operations should be asynchronous on Dovecot's side (to be scalable) 6. maybe even Dovecot's index-queries could be offloaded to the backend service (this way the local file system wouldn't be used at all and all caches could be stored in a distributed dictionary), this could also be a capability 7. it could support some kind of push (for IDLE-ing and the like) 8. it should be stateless If Dovecot could make this right, it could be the FUSE of the mail protocols, acting as a glue for experimental or production ready mail storage backends, without the need to write these backends in "Dovecot C" (I mean it's process and API structure). Of course HTTP here is not a strict requirement. It could be anything, which can be easy to implement and understand and is able to fulfill the needs. An example could be Dovecot's own dictionary protocol. What do you think about this?

4 10

autoexpunge - different settings for different users
by Tom Johnson 09 Feb '16

09 Feb '16

I have some users where I'd like to expunge their mail at different times. For example, I may have some users who I want to expunge everything from every folder at 30 days. Others where I'd like to expunge everything at 90 days. And still others where I only want to expunge mail from the Trash and Junk folders, and nowhere else. Is there a way to do some sort of lookup for this? Or is this beyond the ability of the autoexpunge feature? Should I just use a cron job and use "doveadm expunge" on a user-by-user basis? Thanks-

5 9

Dovecot with pam authentication and user@domain
by Christian Schneider 08 Feb '16

08 Feb '16

Hello all, I'm trying to setup dovecot for local users with pam authentication. The passdb and userdb entries are as follows: passdb { args = username_format=%n driver = pam } userdb { args = username_format=%n driver = passwd } Using "doveadm user chriss" returns the user record as expected, but "doveadm user chriss(a)testmail.ch-sc.de" gives an error: field valueuserdb lookup: user chriss(a)testmail.ch-sc.de doesn't exist As far as I understand, username_format=%n should drop the domain part and only search for the user in the userdb, but it doesn't. What am I missing? Greetings Christian

1 1

Permissions issue with Debian 8, dovecot 2.21, vpopmail
by Stephen 08 Feb '16

08 Feb '16

There is a permissions issue in dovecot 2.21 in the ~/run directory (mine is /var/run/dovecot) at least in Debian 8. Files created by dovecot imap: srw------- 1 root root 0 Feb 3 16:46 imap-hibernate srw------- 1 root root 0 Feb 3 16:46 imap-master changed to make work: srw-rw-rw- 1 root root 0 Feb 3 16:46 imap-hibernate srw-rw-rw- 1 root root 0 Feb 3 16:46 imap-master Errors were reported in /var/log/dovecot.log which we use mainly for fail2ban (it gets huge, but ...) vpopmail version 5.4.33 with one patch I don't think this is a Debian issue ... possibly could be a vpopmail issue, but it's probably caused by the fact that imap daemons are running as vpopmail: vpopmail 30182 9187 0 15:02 ? 00:00:00 dovecot/imap

2 1

Released Pigeonhole v0.4.12 for Dovecot v2.2.21
by Stephan Bosch 08 Feb '16

08 Feb '16

Hello Dovecot users, Here is the final v0.4.12 release of Pigeonhole for Dovecot v2.2.21. Nothing changed since the RC. Changelog v0.4.12: + Implemented the Sieve extracttext extension (RFC 5703; Section 7). It is now possible to extract body text from a message into a variable. * Increased ABI version due to changes in the Sieve interpreter's object definitions. - multiscript: Fixed bug in handling of (implicit) keep; final keep action was always executed as though there was a failure. This caused the keep action to revert back to the initial message, causing editheader actions to be ignored. - managesieve-login: Fixed proxy to allow SASL mechanisms other than PLAIN. Before, the proxy would fail if the server did not support the PLAIN mechanism. - ldap storage: Prevent segfault occurring when assigning certain (global) configuration options. The release is available as follows: http://pigeonhole.dovecot.org/releases/2.2/dovecot-2.2-pigeonhole-0.4.12.ta… http://pigeonhole.dovecot.org/releases/2.2/dovecot-2.2-pigeonhole-0.4.12.ta… Refer to http://pigeonhole.dovecot.org and the Dovecot v2.x wiki for more information. Have fun testing this release and don't hesitate to notify me when there are any problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

2 3

"mail_shared_explicit_inbox = no", but shared INBOX has a "\Noselect" tag?
by Rudolf Körner 08 Feb '16

08 Feb '16

Regarding the given information, it seems to me that the option "mail_shared_explicit_inbox=no" does not work as expected. Quote from NEWS-2.2: mail_shared_explicit_inbox setting to specify if a shared INBOX should be accessible as "shared/$user" or "shared/$user/INBOX" Using Dovecot 2.2.13 and Maildir++ Working on the commandline: # doveconf mail_shared_explicit_inbox mail_shared_explicit_inbox = no # service dovecot restart # ls -lda /mail/reader/Shared/owner(a)example.com/.* Shows no (hidden) folders. # telnet 127.0.0.1 143 a0 login reader(a)example.com *** a1 list "" "Shared/owner(a)example.com" * LIST (\Noselect \HasChildren) "/" Shared/owner(a)example.com a1 OK List completed. Is the retrieved "\Noselect" tag correct with the option "mail_shared_explicit_inbox = no"? I would expect the folder "Shared/owner(a)example.com" to be "selectable", because I thought the option "mail_shared_explicit_inbox = no" would make e-mails of a shared INBOX visible directly at the folder "Shared/owner(a)example.com" (which does not work in my case). Note: Shared *sub*folders of an INBOX work as expected. Just to show that the shared INBOX is accessible (note that it is not shown by a list "" "*" here, which is expected with that option): a2 list "" "Shared/owner(a)example.com/INBOX" a2 OK List completed. a3 select Shared/owner(a)example.com/INBOX * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 27 EXISTS Using "mail_shared_explicit_inbox = yes" does show the INBOX as a subfolder of "Shared/owner(a)example.com" and allows accessing the e-mails of the shared INBOX. However, it would be nice (and keep users happy at using their known shared folder layout) to see the e-mails of the shared INBOX at the Shared/owner(a)example.com folder. Best Regards, R.Koerner output of (removed irrelevant things like auth,pop,passdb,userdb,ssl,debug) # dovecot -n # 2.2.13: /etc/dovecot/dovecot.conf mail_location = maildir:~/Maildir mail_log_prefix = "%Us(%u): " mail_plugins = acl listescape namespace { hidden = no ignore_on_failure = no inbox = no list = children location = maildir:%%h/Maildir:INDEX=%h/Shared/%%u:CONTROL=%h/Shared/%%u:INDEXPVT=%h/Shared/%%u prefix = Shared/%%u/ separator = / subscriptions = yes type = shared } namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = INBOX/ separator = / subscriptions = yes type = private } plugin { acl = vfile acl_shared_dict = file:/var/lib/dovecot/db/shared-mailboxes.db mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename } protocols = imap lmtp protocol imap { mail_plugins = acl listescape imap_acl }

1 1

ACL user
by Peter Chiochetti 08 Feb '16

08 Feb '16

How would I go, If I wanted ACL processing to start with %{auth_user} instead of %{user} when determining rights? -- peter

2 2

Send Dovecot logs to rsyslog
by Nicolas Fo 08 Feb '16

08 Feb '16

Hello, I'm trying to send Dovecot logs to a Graylog server. To do this, I'd like to pass logs to rsyslog and rsyslog pass logs to remote Graylog server. I set in dovecot.conf : syslog_facility = local5.info I set in rsyslog.conf : local5.info @192.168.xxx.xxx:5555 Restarted services and it doesn't work. I use nmap to test if port 5555 is opened and this port is open. What missed I ? Thanks Nicolas

4 7

Dovecot (LDAP) quota only if user in backend?
by Andrey Fesenko 08 Feb '16

08 Feb '16

Hello, Is it possible to get the quotas for users served by the backend? My env CentOS, dovecot-2.2.10-5.el7, users in LDAP dn: uid=user,ou=mailboxs,dc=wibble,dc=net cn: Account for server mail sn: User objectClass: top objectClass: person objectClass: posixAccount objectClass: VirtualMailAccount objectClass: Proxying uid: user gidNumber: 3000 uidNumber: 3000 userPassword: {SSHA} homeDirectory: user mailQuota: 1073741824 mailDirectory: maildir:~/Maildir Proxy: yes BackendHost: backend1.wibble.net starttlsProxying: any-cert BackendHost may bee backend1.wibble.net backend2.wibble.net ... if I'm get quota in backend1.wibble.net doveadm -f tab quota get -A If use standart /etc/dovecot/dovecot-ldap.conf user_filter = (&(objectClass=posixAccount)(uid=%u)), dovecot create blank mailboxes for all users, not only BackendHost: backend1.wibble.net If modify (&(objectClass=posixAccount)(uid=%u)(BackendHost=backend1.wibble.net)) doveadm -f tab quota get -u user work fine doveadm -f tab quota get -A doveadm(user1): Info: User no longer exists, skipping doveadm(user2): Info: User no longer exists, skipping doveadm(user3): Info: User no longer exists, skipping ... doveadm: Error: Failed to iterate through some users work for all dovecot user, and crash

1 1

simple bind + X.509 client certificate?
by Heiko Schlittermann 05 Feb '16

05 Feb '16

Hi, using dovecot 2.2.9. The LDAP server requests a client certificate from dovecot. This client certificate will not be used for authentication, but anyway, the server requests it. No SASL is involved. ldapsearch and Exim work as expected, sending the client cert. The slapd is configured: olcTLSVerifyClient: demand For authentication simple bind should be used. Dovecot doesn't seem to send the requested client certificate. If I sniff the connection, the "Certificate" sent to the server is empty. Using ldapsearch it works (and the certificate isn't empty). Any suggestions? Best regards from Dresden/Germany Viele Grüße aus Dresden Heiko Schlittermann -- SCHLITTERMANN.de ---------------------------- internet & unix support - Heiko Schlittermann, Dipl.-Ing. (TU) - {fon,fax}: +49.351.802998{1,3} - gnupg encrypted messages are welcome --------------- key ID: F69376CE - ! key id 7CBF764A and 972EAC9F are revoked since 2015-01 ------------ -

1 1

doveadm backup -- private flags in shared mailbox
by almut bertha 05 Feb '16

05 Feb '16

dear list, i try to backup our dovecot server via doveadm -Dv backup -A -n inbox -n shared remote:vmail@192.168.122.51 So far, it's working fine except for one thing: the "seen"flags for the shared mailboxes don't get copied to the backup-server. I tried a few things (like calling the doveadm command with different options for the namespaces or defining the mailboxes -m; i also changed the path for INDEXPVT), but none of these worked and i don't know how to tell doveadm to sync these flags. Maybe the config for the namespaces is wrong? Or is it just not possible (yet)? thanks in advance The configs for the source and the backup server are the same: (except for hostname, ip,...) # 2.2.18: /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.8 (0c4ae064f307+) # OS: Linux 4.3.0-1-amd64 x86_64 Debian stretch/sid ext4 auth_verbose = yes default_client_limit = 2500 default_process_limit = 500 disable_plaintext_auth = no doveadm_port = 11111 lmtp_rcpt_check_quota = yes lmtp_save_to_detail_mailbox = yes mail_location = maildir:/srv/vmail/%n/Maildir mail_plugins = " acl quota" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate imapflags notify namespace { hidden = no inbox = no list = children location = maildir:/srv/vmail/%%n/Maildir:INDEXPVT=/srv/vmail/%n/shared/%%n prefix = shared.%%n. separator = . subscriptions = no type = shared } namespace inbox { hidden = no ignore_on_failure = no inbox = yes list = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = INBOX. separator = . subscriptions = yes type = private } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile:/etc/dovecot/global-acls:cache_secs=300 acl_shared_dict = file:/var/lib/dovecot/db/shared-mailboxes.db mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename quota = maildir:User quota:noenforcing quota_grace = 2%% quota_rule = *:storage=3G sieve = /srv/vmail/%Ln/default.sieve sieve_default = /srv/vmail/default.sieve sieve_dir = /srv/vmail/%Ln/sieve sieve_extensions = +notify +imapflags sieve_global_dir = /srv/vmail/global.sieve/ } postmaster_address = postmaster(a)mur.at protocols = " imap lmtp sieve pop3" quota_full_tempfail = yes service auth { unix_listener auth-userdb { group = vmail mode = 0777 user = vmail } } service lmtp { inet_listener lmtp { address = 192.168.122.52 port = 24 } user = vmail } service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieve_deprecated { port = 2000 } process_min_avail = 1 service_count = 1 vsz_limit = 64 M } service managesieve { process_limit = 256 } userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } userdb { args = /etc/dovecot/dovecot-ldap-group-userdb.conf.ext driver = ldap } protocol lmtp { mail_plugins = " acl quota sieve" } protocol imap { mail_max_userip_connections = 16 mail_plugins = " acl quota imap_acl imap_quota" } protocol sieve { managesieve_implementation_string = Dovecot Pigeonhole } protocol pop3 { mail_plugins = " acl quota" }

2 2

Authentication proxy
by Miecio 05 Feb '16

05 Feb '16

Hello everyone! I need to set up kind of gateway for submission and imap request, in order to do that i need to find out solution for verifying user password against multiple IMAP backends. Everything for IMAP proxy works perfectly. But i have a problem with authenticating postfix against dovecot SASL. I wonder if there is any option in dovecot to authenticate SASL requests (from postfix) against remote IMAP server or remote SASL instance. Problem is that this server has to be chosen dynamically on the user name basis, so i have to overwrite somehow host parameter in passdb imap definition. I was thinking about using two separate password databasases, first configured as normal sql lookup with proxy flag and host field and second as imap database with host changed to some parameter matching host from previous lookup. Problem is that i don't see any variable matching host filed from passwd sql lookup. With this approach other problem appears, because I want user to be always authenticated against remote IMAP/SASL so i have to somehow return PASSWORD_MISMATCH from my sql lookup. I tried setting up deny parameter to my sql lookup but it causes to reject whole authentication request without even asking remote imap. Thanks a lot --- Regards Miecio

1 0

R: Re: Mail User Agent?
by absolutely_free＠libero.it 04 Feb '16

04 Feb '16

>----Messaggio originale---- >Da: Timo Sirainen <tss(a)iki.fi> >Data: 02/02/2016 23.27 >A: <azurit(a)pobox.sk> >Cc: <dovecot(a)dovecot.org> >Ogg: Re: Mail User Agent? > >On 02 Feb 2016, at 22:00, azurit(a)pobox.sk wrote: >> >> Thank you for info. Well, i understand that clients are not forced to send the info but, in my logs, there's no single ID info. Do i need to enable logging of it or something? > >imap_id_log = * > Thank you very much!

2 1

external storage for mail attachments
by zucca＠systemschmiede.com 03 Feb '16

03 Feb '16

Hi list! was wondering if it was possible to store mail attachments on a separate storage with dovecot, and if so, how. Of course a single instance storage of these attachments would also be a very good thing, allthough not a basic prerequisite. Thanks in advance Sascha -- Bitte beachten Sie unsere neue Firmenadresse ------------------------------------------------- Systemschmiede IT-Lösungen Zucca & Teves GbR An Fürthenrode 52 52511 Geilenkirchen www.systemschmiede.com Tel.: +49 (0)2451 - 9088390 Fax: +49 (0)2451 - 9124070 Mobil: +49 (0)178 - 4073254 Ust.ID: DE248030393

2 1

Apply modifier on long_name variables
by Leon Kyneur 03 Feb '16

03 Feb '16

Hi, Wondering why it's not possible to do the following in ldap args file: base = ou=People,dc=%Ddomain_first,o=ISP however this does work: base = ou=People,dc=%Dd,o=ISP is it intentional that modifiers do not work on long names? Thanks Leon

1 1

Dovecot with Maildir
by John Williams 03 Feb '16

03 Feb '16

Folks, I'm trying to get dovecot to check a for mail in a maildir format on Ubuntu. Mail is being delivered to and from the system. I can send and receive mail using Pine & Mutt. But I cannot seem to get dovecot to work with the maildir. So I can't check for mail using Dovecot. This is what I'm using for reference: https://help.ubuntu.com/community/Dovecot I believe (not sure actually) the answer is in the mail_location variable for Dovecot. This is what I've tried so far: #mail_location = mbox:~/mail:INBOX=/var/mail/%u#mail_location = maildir:/var/mail/%u/Maildir#mail_location = maildir:~/Maildir:INDEX=/var/mail/%umail_location = maildir:/var/mail/%u/Maildir Mail is being delivered and I can send mail out with Postfix. But Dovecot not working. Any idea why? Thanks in advance!

2 4

Re: Mail User Agent?
by Joseph Tam 03 Feb '16

03 Feb '16

azurit(a)pobox.sk and Tom Sommer asks: > How this ID extension can be enabled in Dovecot? From which version is > it supported? Accordind to Dovecot CAPA's response, it is already enabled * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS LOGINDISABLED] Ready. However, as a previous poster noted, Dovecot doesn't do anything with it other than to log it. The client can elect to ignore it or send an ID string. The ID extension is documented here https://www.ietf.org/rfc/rfc2971.txt I speculated it could be used as a client-side CAPA info so that an IMAP server can modify it's behaviour knowing it's dealing with a certain client, but that is flatly forbidden by RFC (Quoting from RFC) The sole purpose of the ID extension is to enable clients and servers to exchange information on their implementations for the purposes of statistical analysis and problem determination. ... Implementations MUST NOT make operational changes based on the data sent as part of the ID command or response. The ID command is for human consumption only, and is not to be used in improving the performance of clients or servers. Joseph Tam <jtam.home(a)gmail.com>

3 2

IMAP ACLs for groups
by Chris 02 Feb '16

02 Feb '16

Dear All, is there any way to assign POSIX groups to Dovecot IMAP-ACLs? I've tried that today, but I could only open a public folder when my username was listed in the ACL. A group didn't work. How do you manage ACLs for intenseley used public folders with many users? What backend do you use for user management and ACLs? Is there any way to extend permissions? Are there any scripts available that set permissions or grant them when logging in? - Chris

1 0

Disable Client Certificate Authentication for Unencrypted Connections?
by Haravikk 02 Feb '16

02 Feb '16

I’m using dovecot to provide encrypted IMAP e-mail support for remote clients and it’s working great. However, I also need to set up a webmail front-end (Roundcube), which I’m hoping to have use unencrypted IMAP on port 143 (as only port 993 is available externally). The problem I’m running into is that I want to require client certificate authentication on port 993, but dovecot is apparently requiring a certificate on all connections, which is preventing Roundcube from connecting. Since dovecot is also providing authentication to postfix I’ve already created an exemption from the client certificate requirement for SMTP connections by doing the following: protocol !smtp { ssl_ca = </path/to/ca.pem ssl_verify_client_cert = yes auth_ssl_require_client_cert = yes } However, I’m not sure how to do the same thing for unencrypted IMAP connections. Is there a way that I can enable client certificate support for only IMAP port 993, leaving port 143 to handle regular unencrypted IMAP with a username and password? I’ve already added the local network to the trusted networks list, so that Roundcube can use plaintext authentication, can I limit client certificate support in a similar way? Thanks, Haravikk

3 7

Autosubscribe but not autocreate?
by azurit＠pobox.sk 02 Feb '16

02 Feb '16

Hi, is it possible to set a mailbox to autosubscribe IF it exists but NOT autocreate if it doesn't exists? We are having problems with users and Spam folders which are not subscribed so users doesn't see e-mails which are saved there. On the other hand, we don't want to recreate Spam folders which were deleted by users (some of them don't want to filter spam so they deleted Spam folder and spam is saved into INBOX). Or is it somehow possible to subscribe to a folder while creating e-mail account (i'm trying to save its name to 'subscriptions' file but it doesn't work)? Thnak you. azur

1 0

Mail User Agent?
by absolutely_free＠libero.it 02 Feb '16

02 Feb '16

Hi,is there a way to log which MUA is being used from an user? # dovecot --version2.0.9 Thank you

4 4

Re: Mail User Agent?
by Joseph Tam 02 Feb '16

02 Feb '16

Axel Luttgens writes: >> Le 1 f?vr. 2016 ? 17:50, absolutely_free(a)libero.it a ?crit : >> >> Hi,is there a way to log which MUA is being used from an user? >> # dovecot --version2.0.9 >> Thank you > > Unless I missed some recent changes, neither POP nor IMAP protocols > make provisions for having the client to send such info. > > As a result, dovecot does not have that info. I regularly get such info in my logs e.g. Feb 1 14:10:45 server dovecot: imap(user): ID sent: name=iPhone Mail, version=12F70, os=iOS, os-version=8.3 (12F70) Only for IMAP (ID extension?). Joseph Tam <jtam.home(a)gmail.com>

2 1

Can you "doveadm search" with mailbox location instead of a user (-u option)?
by Christian Rohmann 02 Feb '16

02 Feb '16

Hey dovecot-users! doveadm import offers to use i.e. a maildir as source and then import into a users mailbox referenced via "-u" option. If one wants to import only certain emails from the source a search-query can be given as well. I was wondering if doveadm search also does offer to search a mailbox referenced by filesystem path i.e. doveadm search maildir:/srv/mailboxes/example.com/mailbox123 NEW Maybe a fixed mailbox location via "-o mailbox_location=maildir:/srv/mailboxes/example.com/mailbox123" does work, but then it's rather a side effect as one needs to define a user via "-u" parameter anyways. Regards Christian

2 2

ACL and LDAP
by Chris 01 Feb '16

01 Feb '16

Dear All, is it possible to store ACLs in LDAP? Does anyone happen to have a script that syncs ACLs read from LDAP with Dovecot? - Chris

2 2